armv8: Move secure_ram variable out of generic global data
Secure_ram variable was put in generic global data. But only ARMv8
uses this variable. Move it to ARM specific data structure.
Signed-off-by: York Sun <york.sun@nxp.com>
diff --git a/README b/README
index 26d5ad2..af37d41 100644
--- a/README
+++ b/README
@@ -3766,10 +3766,11 @@
You only need to set this if address zero isn't writeable
- CONFIG_SYS_MEM_RESERVE_SECURE
+ Only implemented for ARMv8 for now.
If defined, the size of CONFIG_SYS_MEM_RESERVE_SECURE memory
is substracted from total RAM and won't be reported to OS.
This memory can be used as secure memory. A variable
- gd->secure_ram is used to track the location. In systems
+ gd->arch.secure_ram is used to track the location. In systems
the RAM base is not zero, or RAM is divided into banks,
this variable needs to be recalcuated to get the address.
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
index 8062106..a397f5d 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
@@ -289,8 +289,8 @@
* These tables are in DRAM. Sub tables are added to enable cache for
* QBMan and OCRAM.
*
- * Put the MMU table in secure memory if gd->secure_ram is valid.
- * OCRAM will be not used for this purpose so gd->secure_ram can't be 0.
+ * Put the MMU table in secure memory if gd->arch.secure_ram is valid.
+ * OCRAM will be not used for this purpose so gd->arch.secure_ram can't be 0.
*
* Level 1 table 0 contains 512 entries for each 1GB from 0 to 512GB.
* Level 1 table 1 contains 512 entries for each 1GB from 512GB to 1TB.
@@ -321,13 +321,13 @@
if (el == 3) {
/*
- * Only use gd->secure_ram if the address is recalculated
+ * Only use gd->arch.secure_ram if the address is recalculated
* Align to 4KB for MMU table
*/
- if (gd->secure_ram & MEM_RESERVE_SECURE_MAINTAINED)
- level0_table = (u64 *)(gd->secure_ram & ~0xfff);
+ if (gd->arch.secure_ram & MEM_RESERVE_SECURE_MAINTAINED)
+ level0_table = (u64 *)(gd->arch.secure_ram & ~0xfff);
else
- printf("MMU warning: gd->secure_ram is not maintained, disabled.\n");
+ printf("MMU warning: gd->arch.secure_ram is not maintained, disabled.\n");
}
#endif
level1_table0 = level0_table + 512;
@@ -374,7 +374,7 @@
}
/* Set the secure memory to secure in MMU */
#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
- if (el == 3 && gd->secure_ram & MEM_RESERVE_SECURE_MAINTAINED) {
+ if (el == 3 && gd->arch.secure_ram & MEM_RESERVE_SECURE_MAINTAINED) {
#ifdef CONFIG_FSL_LSCH3
level2_table_secure = level2_table1 + 512;
#elif defined(CONFIG_FSL_LSCH2)
@@ -382,10 +382,10 @@
#endif
if (!final_secure_ddr(level0_table,
level2_table_secure,
- gd->secure_ram & ~0x3)) {
- gd->secure_ram |= MEM_RESERVE_SECURE_SECURED;
+ gd->arch.secure_ram & ~0x3)) {
+ gd->arch.secure_ram |= MEM_RESERVE_SECURE_SECURED;
debug("Now MMU table is in secured memory at 0x%llx\n",
- gd->secure_ram & ~0x3);
+ gd->arch.secure_ram & ~0x3);
} else {
printf("MMU warning: Failed to secure DDR\n");
}
diff --git a/arch/arm/include/asm/global_data.h b/arch/arm/include/asm/global_data.h
index 77d2653..2d76cd4 100644
--- a/arch/arm/include/asm/global_data.h
+++ b/arch/arm/include/asm/global_data.h
@@ -44,6 +44,20 @@
unsigned long tlb_emerg;
#endif
#endif
+#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
+#define MEM_RESERVE_SECURE_SECURED 0x1
+#define MEM_RESERVE_SECURE_MAINTAINED 0x2
+#define MEM_RESERVE_SECURE_ADDR_MASK (~0x3)
+ /*
+ * Secure memory addr
+ * This variable needs maintenance if the RAM base is not zero,
+ * or if RAM splits into non-consecutive banks. It also has a
+ * flag indicating the secure memory is marked as secure by MMU.
+ * Flags used: 0x1 secured
+ * 0x2 maintained
+ */
+ phys_addr_t secure_ram;
+#endif
#ifdef CONFIG_OMAP_COMMON
u32 omap_boot_device;
diff --git a/board/freescale/ls1043aqds/ddr.c b/board/freescale/ls1043aqds/ddr.c
index 0fd835d..d4540d0 100644
--- a/board/freescale/ls1043aqds/ddr.c
+++ b/board/freescale/ls1043aqds/ddr.c
@@ -128,7 +128,7 @@
void dram_init_banksize(void)
{
/*
- * gd->secure_ram tracks the location of secure memory.
+ * gd->arch.secure_ram tracks the location of secure memory.
* It was set as if the memory starts from 0.
* The address needs to add the offset of its bank.
*/
@@ -139,16 +139,17 @@
gd->bd->bi_dram[1].size = gd->ram_size -
CONFIG_SYS_DDR_BLOCK1_SIZE;
#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
- gd->secure_ram = gd->bd->bi_dram[1].start +
- gd->secure_ram -
- CONFIG_SYS_DDR_BLOCK1_SIZE;
- gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
+ gd->arch.secure_ram = gd->bd->bi_dram[1].start +
+ gd->arch.secure_ram -
+ CONFIG_SYS_DDR_BLOCK1_SIZE;
+ gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
#endif
} else {
gd->bd->bi_dram[0].size = gd->ram_size;
#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
- gd->secure_ram = gd->bd->bi_dram[0].start + gd->secure_ram;
- gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
+ gd->arch.secure_ram = gd->bd->bi_dram[0].start +
+ gd->arch.secure_ram;
+ gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
#endif
}
}
diff --git a/board/freescale/ls1043ardb/ddr.c b/board/freescale/ls1043ardb/ddr.c
index 1e2fd2e..61b1cc4 100644
--- a/board/freescale/ls1043ardb/ddr.c
+++ b/board/freescale/ls1043ardb/ddr.c
@@ -189,7 +189,7 @@
void dram_init_banksize(void)
{
/*
- * gd->secure_ram tracks the location of secure memory.
+ * gd->arch.secure_ram tracks the location of secure memory.
* It was set as if the memory starts from 0.
* The address needs to add the offset of its bank.
*/
@@ -200,16 +200,17 @@
gd->bd->bi_dram[1].size = gd->ram_size -
CONFIG_SYS_DDR_BLOCK1_SIZE;
#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
- gd->secure_ram = gd->bd->bi_dram[1].start +
- gd->secure_ram -
- CONFIG_SYS_DDR_BLOCK1_SIZE;
- gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
+ gd->arch.secure_ram = gd->bd->bi_dram[1].start +
+ gd->arch.secure_ram -
+ CONFIG_SYS_DDR_BLOCK1_SIZE;
+ gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
#endif
} else {
gd->bd->bi_dram[0].size = gd->ram_size;
#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
- gd->secure_ram = gd->bd->bi_dram[0].start + gd->secure_ram;
- gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
+ gd->arch.secure_ram = gd->bd->bi_dram[0].start +
+ gd->arch.secure_ram;
+ gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
#endif
}
}
diff --git a/board/freescale/ls2080a/ddr.c b/board/freescale/ls2080a/ddr.c
index 1827ddc..e6130ec 100644
--- a/board/freescale/ls2080a/ddr.c
+++ b/board/freescale/ls2080a/ddr.c
@@ -177,7 +177,7 @@
#endif
/*
- * gd->secure_ram tracks the location of secure memory.
+ * gd->arch.secure_ram tracks the location of secure memory.
* It was set as if the memory starts from 0.
* The address needs to add the offset of its bank.
*/
@@ -188,16 +188,17 @@
gd->bd->bi_dram[1].size = gd->ram_size -
CONFIG_SYS_LS2_DDR_BLOCK1_SIZE;
#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
- gd->secure_ram = gd->bd->bi_dram[1].start +
- gd->secure_ram -
- CONFIG_SYS_LS2_DDR_BLOCK1_SIZE;
- gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
+ gd->arch.secure_ram = gd->bd->bi_dram[1].start +
+ gd->arch.secure_ram -
+ CONFIG_SYS_LS2_DDR_BLOCK1_SIZE;
+ gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
#endif
} else {
gd->bd->bi_dram[0].size = gd->ram_size;
#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
- gd->secure_ram = gd->bd->bi_dram[0].start + gd->secure_ram;
- gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
+ gd->arch.secure_ram = gd->bd->bi_dram[0].start +
+ gd->arch.secure_ram;
+ gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
#endif
}
diff --git a/board/freescale/ls2080aqds/ddr.c b/board/freescale/ls2080aqds/ddr.c
index fcb0366..9c6f477 100644
--- a/board/freescale/ls2080aqds/ddr.c
+++ b/board/freescale/ls2080aqds/ddr.c
@@ -177,7 +177,7 @@
#endif
/*
- * gd->secure_ram tracks the location of secure memory.
+ * gd->arch.secure_ram tracks the location of secure memory.
* It was set as if the memory starts from 0.
* The address needs to add the offset of its bank.
*/
@@ -188,16 +188,17 @@
gd->bd->bi_dram[1].size = gd->ram_size -
CONFIG_SYS_LS2_DDR_BLOCK1_SIZE;
#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
- gd->secure_ram = gd->bd->bi_dram[1].start +
- gd->secure_ram -
- CONFIG_SYS_LS2_DDR_BLOCK1_SIZE;
- gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
+ gd->arch.secure_ram = gd->bd->bi_dram[1].start +
+ gd->arch.secure_ram -
+ CONFIG_SYS_LS2_DDR_BLOCK1_SIZE;
+ gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
#endif
} else {
gd->bd->bi_dram[0].size = gd->ram_size;
#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
- gd->secure_ram = gd->bd->bi_dram[0].start + gd->secure_ram;
- gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
+ gd->arch.secure_ram = gd->bd->bi_dram[0].start +
+ gd->arch.secure_ram;
+ gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
#endif
}
diff --git a/board/freescale/ls2080ardb/ddr.c b/board/freescale/ls2080ardb/ddr.c
index a04d21b..ecd1e71 100644
--- a/board/freescale/ls2080ardb/ddr.c
+++ b/board/freescale/ls2080ardb/ddr.c
@@ -177,7 +177,7 @@
#endif
/*
- * gd->secure_ram tracks the location of secure memory.
+ * gd->arch.secure_ram tracks the location of secure memory.
* It was set as if the memory starts from 0.
* The address needs to add the offset of its bank.
*/
@@ -188,16 +188,17 @@
gd->bd->bi_dram[1].size = gd->ram_size -
CONFIG_SYS_LS2_DDR_BLOCK1_SIZE;
#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
- gd->secure_ram = gd->bd->bi_dram[1].start +
- gd->secure_ram -
- CONFIG_SYS_LS2_DDR_BLOCK1_SIZE;
- gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
+ gd->arch.secure_ram = gd->bd->bi_dram[1].start +
+ gd->arch.secure_ram -
+ CONFIG_SYS_LS2_DDR_BLOCK1_SIZE;
+ gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
#endif
} else {
gd->bd->bi_dram[0].size = gd->ram_size;
#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
- gd->secure_ram = gd->bd->bi_dram[0].start + gd->secure_ram;
- gd->secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
+ gd->arch.secure_ram = gd->bd->bi_dram[0].start +
+ gd->arch.secure_ram;
+ gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
#endif
}
diff --git a/cmd/bdinfo.c b/cmd/bdinfo.c
index 1c4bed9..f2435ab 100644
--- a/cmd/bdinfo.c
+++ b/cmd/bdinfo.c
@@ -385,9 +385,9 @@
}
#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
- if (gd->secure_ram & MEM_RESERVE_SECURE_SECURED) {
+ if (gd->arch.secure_ram & MEM_RESERVE_SECURE_SECURED) {
print_num("Secure ram",
- gd->secure_ram & MEM_RESERVE_SECURE_ADDR_MASK);
+ gd->arch.secure_ram & MEM_RESERVE_SECURE_ADDR_MASK);
}
#endif
#if defined(CONFIG_CMD_NET) && !defined(CONFIG_DM_ETH)
diff --git a/common/board_f.c b/common/board_f.c
index d405b5b..0fc96bd 100644
--- a/common/board_f.c
+++ b/common/board_f.c
@@ -339,7 +339,7 @@
* Record secure memory location. Need recalcuate if memory splits
* into banks, or the ram base is not zero.
*/
- gd->secure_ram = gd->ram_size;
+ gd->arch.secure_ram = gd->ram_size;
#endif
/*
* Subtract specified amount of memory to hide so that it won't
diff --git a/include/asm-generic/global_data.h b/include/asm-generic/global_data.h
index 0abcbe4..a6d1d2a 100644
--- a/include/asm-generic/global_data.h
+++ b/include/asm-generic/global_data.h
@@ -55,20 +55,6 @@
unsigned long relocaddr; /* Start address of U-Boot in RAM */
phys_size_t ram_size; /* RAM size */
-#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
-#define MEM_RESERVE_SECURE_SECURED 0x1
-#define MEM_RESERVE_SECURE_MAINTAINED 0x2
-#define MEM_RESERVE_SECURE_ADDR_MASK (~0x3)
- /*
- * Secure memory addr
- * This variable needs maintenance if the RAM base is not zero,
- * or if RAM splits into non-consecutive banks. It also has a
- * flag indicating the secure memory is marked as secure by MMU.
- * Flags used: 0x1 secured
- * 0x2 maintained
- */
- phys_addr_t secure_ram;
-#endif
unsigned long mon_len; /* monitor len */
unsigned long irq_sp; /* irq stack pointer */
unsigned long start_addr_sp; /* start_addr_stackpointer */