i2c, mxc: rework i2c base address names for different SoCs
rework and unify i2c address names for different SoCs, which
use the mxc_i2c driver.
Signed-off-by: Heiko Schocher <hs@denx.de>
diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c
index 2949e52..b3c50aa 100644
--- a/drivers/i2c/mxc_i2c.c
+++ b/drivers/i2c/mxc_i2c.c
@@ -170,6 +170,9 @@
u8 idx = i2c_clk_div[clk_idx][1];
int reg_shift = quirk ? VF610_I2C_REGSHIFT : IMX_I2C_REGSHIFT;
+ if (!base)
+ return -ENODEV;
+
/* Store divider value */
writeb(idx, base + (IFDR << reg_shift));
@@ -351,6 +354,10 @@
int ret;
int reg_shift = i2c_bus->driver_data & I2C_QUIRK_FLAG ?
VF610_I2C_REGSHIFT : IMX_I2C_REGSHIFT;
+
+ if (!i2c_bus->base)
+ return -ENODEV;
+
for (retry = 0; retry < 3; retry++) {
ret = i2c_init_transfer_(i2c_bus, chip, addr, alen);
if (ret >= 0)
@@ -503,38 +510,30 @@
return ret;
}
-static struct mxc_i2c_bus mxc_i2c_buses[] = {
-#if defined(CONFIG_MX25)
- { 0, IMX_I2C_BASE },
- { 1, IMX_I2C2_BASE },
- { 2, IMX_I2C3_BASE },
-#elif defined(CONFIG_MX27)
- { 0, IMX_I2C1_BASE },
- { 1, IMX_I2C2_BASE },
-#elif defined(CONFIG_MX31) || defined(CONFIG_MX35) || \
- defined(CONFIG_MX51) || defined(CONFIG_MX53) || \
- defined(CONFIG_MX6)
- { 0, I2C1_BASE_ADDR },
- { 1, I2C2_BASE_ADDR },
- { 2, I2C3_BASE_ADDR },
-#if defined(CONFIG_MX6DL)
- { 3, I2C4_BASE_ADDR },
+#if !defined(I2C2_BASE_ADDR)
+#define I2C2_BASE_ADDR 0
#endif
-#elif defined(CONFIG_LS102XA)
- { 0, I2C1_BASE_ADDR, I2C_QUIRK_FLAG },
- { 1, I2C2_BASE_ADDR, I2C_QUIRK_FLAG },
- { 2, I2C3_BASE_ADDR, I2C_QUIRK_FLAG },
-#elif defined(CONFIG_VF610)
- { 0, I2C0_BASE_ADDR, I2C_QUIRK_FLAG },
-#elif defined(CONFIG_FSL_LSCH3)
+
+#if !defined(I2C3_BASE_ADDR)
+#define I2C3_BASE_ADDR 0
+#endif
+
+#if !defined(I2C4_BASE_ADDR)
+#define I2C4_BASE_ADDR 0
+#endif
+
+static struct mxc_i2c_bus mxc_i2c_buses[] = {
+#if defined(CONFIG_LS102XA) || defined(CONFIG_FSL_LSCH3)
{ 0, I2C1_BASE_ADDR, I2C_QUIRK_FLAG },
{ 1, I2C2_BASE_ADDR, I2C_QUIRK_FLAG },
{ 2, I2C3_BASE_ADDR, I2C_QUIRK_FLAG },
{ 3, I2C4_BASE_ADDR, I2C_QUIRK_FLAG },
#else
-#error "architecture not supported"
+ { 0, I2C1_BASE_ADDR, 0 },
+ { 1, I2C2_BASE_ADDR, 0 },
+ { 2, I2C3_BASE_ADDR, 0 },
+ { 3, I2C4_BASE_ADDR, 0 },
#endif
- { }
};
struct mxc_i2c_bus *i2c_get_base(struct i2c_adapter *adap)