spi: davinci_spi: Move header code to driver
Move the header code into driver for more readable and
easy to access it.
Signed-off-by: Jagan Teki <jteki@openedev.com>
Cc: Rex Chang <rchang@ti.com>
Cc: Murali Karicheri <m-karicheri2@ti.com>
diff --git a/drivers/spi/davinci_spi.c b/drivers/spi/davinci_spi.c
index bf18362..e0ecf99 100644
--- a/drivers/spi/davinci_spi.c
+++ b/drivers/spi/davinci_spi.c
@@ -13,7 +13,115 @@
#include <malloc.h>
#include <asm/io.h>
#include <asm/arch/hardware.h>
-#include "davinci_spi.h"
+
+struct davinci_spi_regs {
+ dv_reg gcr0; /* 0x00 */
+ dv_reg gcr1; /* 0x04 */
+ dv_reg int0; /* 0x08 */
+ dv_reg lvl; /* 0x0c */
+ dv_reg flg; /* 0x10 */
+ dv_reg pc0; /* 0x14 */
+ dv_reg pc1; /* 0x18 */
+ dv_reg pc2; /* 0x1c */
+ dv_reg pc3; /* 0x20 */
+ dv_reg pc4; /* 0x24 */
+ dv_reg pc5; /* 0x28 */
+ dv_reg rsvd[3];
+ dv_reg dat0; /* 0x38 */
+ dv_reg dat1; /* 0x3c */
+ dv_reg buf; /* 0x40 */
+ dv_reg emu; /* 0x44 */
+ dv_reg delay; /* 0x48 */
+ dv_reg def; /* 0x4c */
+ dv_reg fmt0; /* 0x50 */
+ dv_reg fmt1; /* 0x54 */
+ dv_reg fmt2; /* 0x58 */
+ dv_reg fmt3; /* 0x5c */
+ dv_reg intvec0; /* 0x60 */
+ dv_reg intvec1; /* 0x64 */
+};
+
+#define BIT(x) (1 << (x))
+
+/* SPIGCR0 */
+#define SPIGCR0_SPIENA_MASK 0x1
+#define SPIGCR0_SPIRST_MASK 0x0
+
+/* SPIGCR0 */
+#define SPIGCR1_CLKMOD_MASK BIT(1)
+#define SPIGCR1_MASTER_MASK BIT(0)
+#define SPIGCR1_SPIENA_MASK BIT(24)
+
+/* SPIPC0 */
+#define SPIPC0_DIFUN_MASK BIT(11) /* SIMO */
+#define SPIPC0_DOFUN_MASK BIT(10) /* SOMI */
+#define SPIPC0_CLKFUN_MASK BIT(9) /* CLK */
+#define SPIPC0_EN0FUN_MASK BIT(0)
+
+/* SPIFMT0 */
+#define SPIFMT_SHIFTDIR_SHIFT 20
+#define SPIFMT_POLARITY_SHIFT 17
+#define SPIFMT_PHASE_SHIFT 16
+#define SPIFMT_PRESCALE_SHIFT 8
+
+/* SPIDAT1 */
+#define SPIDAT1_CSHOLD_SHIFT 28
+#define SPIDAT1_CSNR_SHIFT 16
+
+/* SPIDELAY */
+#define SPI_C2TDELAY_SHIFT 24
+#define SPI_T2CDELAY_SHIFT 16
+
+/* SPIBUF */
+#define SPIBUF_RXEMPTY_MASK BIT(31)
+#define SPIBUF_TXFULL_MASK BIT(29)
+
+/* SPIDEF */
+#define SPIDEF_CSDEF0_MASK BIT(0)
+
+#define SPI0_BUS 0
+#define SPI0_BASE CONFIG_SYS_SPI_BASE
+/*
+ * Define default SPI0_NUM_CS as 1 for existing platforms that uses this
+ * driver. Platform can configure number of CS using CONFIG_SYS_SPI0_NUM_CS
+ * if more than one CS is supported and by defining CONFIG_SYS_SPI0.
+ */
+#ifndef CONFIG_SYS_SPI0
+#define SPI0_NUM_CS 1
+#else
+#define SPI0_NUM_CS CONFIG_SYS_SPI0_NUM_CS
+#endif
+
+/*
+ * define CONFIG_SYS_SPI1 when platform has spi-1 device (bus #1) and
+ * CONFIG_SYS_SPI1_NUM_CS defines number of CS on this bus
+ */
+#ifdef CONFIG_SYS_SPI1
+#define SPI1_BUS 1
+#define SPI1_NUM_CS CONFIG_SYS_SPI1_NUM_CS
+#define SPI1_BASE CONFIG_SYS_SPI1_BASE
+#endif
+
+/*
+ * define CONFIG_SYS_SPI2 when platform has spi-2 device (bus #2) and
+ * CONFIG_SYS_SPI2_NUM_CS defines number of CS on this bus
+ */
+#ifdef CONFIG_SYS_SPI2
+#define SPI2_BUS 2
+#define SPI2_NUM_CS CONFIG_SYS_SPI2_NUM_CS
+#define SPI2_BASE CONFIG_SYS_SPI2_BASE
+#endif
+
+struct davinci_spi_slave {
+ struct spi_slave slave;
+ struct davinci_spi_regs *regs;
+ unsigned int freq;
+};
+
+static inline struct davinci_spi_slave *to_davinci_spi(struct spi_slave *slave)
+{
+ return container_of(slave, struct davinci_spi_slave, slave);
+}
void spi_init()
{
diff --git a/drivers/spi/davinci_spi.h b/drivers/spi/davinci_spi.h
deleted file mode 100644
index d4612d3..0000000
--- a/drivers/spi/davinci_spi.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
- *
- * Register definitions for the DaVinci SPI Controller
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _DAVINCI_SPI_H_
-#define _DAVINCI_SPI_H_
-
-struct davinci_spi_regs {
- dv_reg gcr0; /* 0x00 */
- dv_reg gcr1; /* 0x04 */
- dv_reg int0; /* 0x08 */
- dv_reg lvl; /* 0x0c */
- dv_reg flg; /* 0x10 */
- dv_reg pc0; /* 0x14 */
- dv_reg pc1; /* 0x18 */
- dv_reg pc2; /* 0x1c */
- dv_reg pc3; /* 0x20 */
- dv_reg pc4; /* 0x24 */
- dv_reg pc5; /* 0x28 */
- dv_reg rsvd[3];
- dv_reg dat0; /* 0x38 */
- dv_reg dat1; /* 0x3c */
- dv_reg buf; /* 0x40 */
- dv_reg emu; /* 0x44 */
- dv_reg delay; /* 0x48 */
- dv_reg def; /* 0x4c */
- dv_reg fmt0; /* 0x50 */
- dv_reg fmt1; /* 0x54 */
- dv_reg fmt2; /* 0x58 */
- dv_reg fmt3; /* 0x5c */
- dv_reg intvec0; /* 0x60 */
- dv_reg intvec1; /* 0x64 */
-};
-
-#define BIT(x) (1 << (x))
-
-/* SPIGCR0 */
-#define SPIGCR0_SPIENA_MASK 0x1
-#define SPIGCR0_SPIRST_MASK 0x0
-
-/* SPIGCR0 */
-#define SPIGCR1_CLKMOD_MASK BIT(1)
-#define SPIGCR1_MASTER_MASK BIT(0)
-#define SPIGCR1_SPIENA_MASK BIT(24)
-
-/* SPIPC0 */
-#define SPIPC0_DIFUN_MASK BIT(11) /* SIMO */
-#define SPIPC0_DOFUN_MASK BIT(10) /* SOMI */
-#define SPIPC0_CLKFUN_MASK BIT(9) /* CLK */
-#define SPIPC0_EN0FUN_MASK BIT(0)
-
-/* SPIFMT0 */
-#define SPIFMT_SHIFTDIR_SHIFT 20
-#define SPIFMT_POLARITY_SHIFT 17
-#define SPIFMT_PHASE_SHIFT 16
-#define SPIFMT_PRESCALE_SHIFT 8
-
-/* SPIDAT1 */
-#define SPIDAT1_CSHOLD_SHIFT 28
-#define SPIDAT1_CSNR_SHIFT 16
-
-/* SPIDELAY */
-#define SPI_C2TDELAY_SHIFT 24
-#define SPI_T2CDELAY_SHIFT 16
-
-/* SPIBUF */
-#define SPIBUF_RXEMPTY_MASK BIT(31)
-#define SPIBUF_TXFULL_MASK BIT(29)
-
-/* SPIDEF */
-#define SPIDEF_CSDEF0_MASK BIT(0)
-
-#define SPI0_BUS 0
-#define SPI0_BASE CONFIG_SYS_SPI_BASE
-/*
- * Define default SPI0_NUM_CS as 1 for existing platforms that uses this
- * driver. Platform can configure number of CS using CONFIG_SYS_SPI0_NUM_CS
- * if more than one CS is supported and by defining CONFIG_SYS_SPI0.
- */
-#ifndef CONFIG_SYS_SPI0
-#define SPI0_NUM_CS 1
-#else
-#define SPI0_NUM_CS CONFIG_SYS_SPI0_NUM_CS
-#endif
-
-/*
- * define CONFIG_SYS_SPI1 when platform has spi-1 device (bus #1) and
- * CONFIG_SYS_SPI1_NUM_CS defines number of CS on this bus
- */
-#ifdef CONFIG_SYS_SPI1
-#define SPI1_BUS 1
-#define SPI1_NUM_CS CONFIG_SYS_SPI1_NUM_CS
-#define SPI1_BASE CONFIG_SYS_SPI1_BASE
-#endif
-
-/*
- * define CONFIG_SYS_SPI2 when platform has spi-2 device (bus #2) and
- * CONFIG_SYS_SPI2_NUM_CS defines number of CS on this bus
- */
-#ifdef CONFIG_SYS_SPI2
-#define SPI2_BUS 2
-#define SPI2_NUM_CS CONFIG_SYS_SPI2_NUM_CS
-#define SPI2_BASE CONFIG_SYS_SPI2_BASE
-#endif
-
-struct davinci_spi_slave {
- struct spi_slave slave;
- struct davinci_spi_regs *regs;
- unsigned int freq;
-};
-
-static inline struct davinci_spi_slave *to_davinci_spi(struct spi_slave *slave)
-{
- return container_of(slave, struct davinci_spi_slave, slave);
-}
-
-#endif /* _DAVINCI_SPI_H_ */