compulab: eeprom: allow reading mac address from multiple eeproms
Implement the option to select the eeprom i2c bus when reading mac
address.
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: Ilya Ledvich <ilya@compulab.co.il>
Cc: Dmitry Lifshitz <lifshitz@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
diff --git a/board/compulab/cm_fx6/cm_fx6.c b/board/compulab/cm_fx6/cm_fx6.c
index 5ddf8c6..32f4434 100644
--- a/board/compulab/cm_fx6/cm_fx6.c
+++ b/board/compulab/cm_fx6/cm_fx6.c
@@ -354,7 +354,7 @@
if (rc)
return 0;
- rc = cl_eeprom_read_mac_addr(enetaddr);
+ rc = cl_eeprom_read_mac_addr(enetaddr, CONFIG_SYS_I2C_EEPROM_BUS);
if (rc)
return rc;
diff --git a/board/compulab/cm_t335/cm_t335.c b/board/compulab/cm_t335/cm_t335.c
index 9583149..592ef3d 100644
--- a/board/compulab/cm_t335/cm_t335.c
+++ b/board/compulab/cm_t335/cm_t335.c
@@ -110,7 +110,7 @@
if (rv)
return 0;
- rv = cl_eeprom_read_mac_addr(enetaddr);
+ rv = cl_eeprom_read_mac_addr(enetaddr, CONFIG_SYS_I2C_EEPROM_BUS);
if (rv)
get_efuse_mac_addr(enetaddr);
diff --git a/board/compulab/cm_t35/cm_t35.c b/board/compulab/cm_t35/cm_t35.c
index 43463d5..9a3b2ee 100644
--- a/board/compulab/cm_t35/cm_t35.c
+++ b/board/compulab/cm_t35/cm_t35.c
@@ -429,7 +429,7 @@
if (rc)
return 0;
- rc = cl_eeprom_read_mac_addr(enetaddr);
+ rc = cl_eeprom_read_mac_addr(enetaddr, CONFIG_SYS_I2C_EEPROM_BUS);
if (rc)
return rc;
diff --git a/board/compulab/cm_t3517/cm_t3517.c b/board/compulab/cm_t3517/cm_t3517.c
index cac1ad9..624cf4c 100644
--- a/board/compulab/cm_t3517/cm_t3517.c
+++ b/board/compulab/cm_t3517/cm_t3517.c
@@ -163,7 +163,7 @@
if (ret)
return 0;
- ret = cl_eeprom_read_mac_addr(enetaddr);
+ ret = cl_eeprom_read_mac_addr(enetaddr, CONFIG_SYS_I2C_EEPROM_BUS);
if (ret) {
ret = am3517_get_efuse_enetaddr(enetaddr);
if (ret)
diff --git a/board/compulab/cm_t54/cm_t54.c b/board/compulab/cm_t54/cm_t54.c
index 2c2530a..fdea909 100644
--- a/board/compulab/cm_t54/cm_t54.c
+++ b/board/compulab/cm_t54/cm_t54.c
@@ -165,7 +165,7 @@
if (ret)
return 0;
- ret = cl_eeprom_read_mac_addr(enetaddr);
+ ret = cl_eeprom_read_mac_addr(enetaddr, CONFIG_SYS_I2C_EEPROM_BUS);
if (ret || !is_valid_ether_addr(enetaddr))
generate_mac_addr(enetaddr);
diff --git a/board/compulab/common/eeprom.c b/board/compulab/common/eeprom.c
index a45e7be..77bcea4 100644
--- a/board/compulab/common/eeprom.c
+++ b/board/compulab/common/eeprom.c
@@ -31,6 +31,7 @@
#define LAYOUT_INVALID 0
#define LAYOUT_LEGACY 0xff
+static int cl_eeprom_bus;
static int cl_eeprom_layout; /* Implicitly LAYOUT_INVALID */
static int cl_eeprom_read(uint offset, uchar *buf, int len)
@@ -38,7 +39,7 @@
int res;
unsigned int current_i2c_bus = i2c_get_bus_num();
- res = i2c_set_bus_num(CONFIG_SYS_I2C_EEPROM_BUS);
+ res = i2c_set_bus_num(cl_eeprom_bus);
if (res < 0)
return res;
@@ -50,13 +51,18 @@
return res;
}
-static int cl_eeprom_setup_layout(void)
+static int cl_eeprom_setup(uint eeprom_bus)
{
int res;
- if (cl_eeprom_layout != LAYOUT_INVALID)
+ /*
+ * We know the setup was already done when the layout is set to a valid
+ * value and we're using the same bus as before.
+ */
+ if (cl_eeprom_layout != LAYOUT_INVALID && eeprom_bus == cl_eeprom_bus)
return 0;
+ cl_eeprom_bus = eeprom_bus;
res = cl_eeprom_read(EEPROM_LAYOUT_VER_OFFSET,
(uchar *)&cl_eeprom_layout, 1);
if (res) {
@@ -77,7 +83,7 @@
memset(serialnr, 0, sizeof(*serialnr));
- if (cl_eeprom_setup_layout())
+ if (cl_eeprom_setup(CONFIG_SYS_I2C_EEPROM_BUS))
return;
offset = (cl_eeprom_layout != LAYOUT_LEGACY) ?
@@ -96,11 +102,11 @@
* Routine: cl_eeprom_read_mac_addr
* Description: read mac address and store it in buf.
*/
-int cl_eeprom_read_mac_addr(uchar *buf)
+int cl_eeprom_read_mac_addr(uchar *buf, uint eeprom_bus)
{
uint offset;
- if (cl_eeprom_setup_layout())
+ if (cl_eeprom_setup(eeprom_bus))
return 0;
offset = (cl_eeprom_layout != LAYOUT_LEGACY) ?
@@ -123,7 +129,7 @@
if (board_rev)
return board_rev;
- if (cl_eeprom_setup_layout())
+ if (cl_eeprom_setup(CONFIG_SYS_I2C_EEPROM_BUS))
return 0;
if (cl_eeprom_layout != LAYOUT_LEGACY)
diff --git a/board/compulab/common/eeprom.h b/board/compulab/common/eeprom.h
index 85d5bf0..50c6b02 100644
--- a/board/compulab/common/eeprom.h
+++ b/board/compulab/common/eeprom.h
@@ -11,10 +11,10 @@
#define _EEPROM_
#ifdef CONFIG_SYS_I2C
-int cl_eeprom_read_mac_addr(uchar *buf);
+int cl_eeprom_read_mac_addr(uchar *buf, uint eeprom_bus);
u32 cl_eeprom_get_board_rev(void);
#else
-static inline int cl_eeprom_read_mac_addr(uchar *buf)
+static inline int cl_eeprom_read_mac_addr(uchar *buf, uint eeprom_bus)
{
return 1;
}