x86: Add support for ACPI general-purpose events
ACPI GPEs are used to signal interrupts from peripherals that are accessed
via ACPI. In U-Boot these are modelled as interrupts using a separate
interrupt controller. Configuration is via the device tree.
Add a simple driver for this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index b3fbf30..c8eae24 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -923,4 +923,37 @@
depends on SPL && X86
default SPL_TEXT_BASE
+config ACPI_GPE
+ bool "Support ACPI general-purpose events"
+ help
+ Enable a driver for ACPI GPEs to allow peripherals to send interrupts
+ via ACPI to the OS. In U-Boot this is only used when U-Boot itself
+ needs access to these interrupts. This can happen when it uses a
+ peripheral that is set up to use GPEs and so cannot use the normal
+ GPIO mechanism for polling an input.
+
+ See https://queue.acm.org/blogposting.cfm?id=18977 for more info
+
+config SPL_ACPI_GPE
+ bool "Support ACPI general-purpose events in SPL"
+ help
+ Enable a driver for ACPI GPEs to allow peripherals to send interrupts
+ via ACPI to the OS. In U-Boot this is only used when U-Boot itself
+ needs access to these interrupts. This can happen when it uses a
+ peripheral that is set up to use GPEs and so cannot use the normal
+ GPIO mechanism for polling an input.
+
+ See https://queue.acm.org/blogposting.cfm?id=18977 for more info
+
+config TPL_ACPI_GPE
+ bool "Support ACPI general-purpose events in TPL"
+ help
+ Enable a driver for ACPI GPEs to allow peripherals to send interrupts
+ via ACPI to the OS. In U-Boot this is only used when U-Boot itself
+ needs access to these interrupts. This can happen when it uses a
+ peripheral that is set up to use GPEs and so cannot use the normal
+ GPIO mechanism for polling an input.
+
+ See https://queue.acm.org/blogposting.cfm?id=18977 for more info
+
endmenu
diff --git a/arch/x86/cpu/Makefile b/arch/x86/cpu/Makefile
index 5b40838..307267a 100644
--- a/arch/x86/cpu/Makefile
+++ b/arch/x86/cpu/Makefile
@@ -55,6 +55,7 @@
obj-$(CONFIG_INTEL_TANGIER) += tangier/
obj-$(CONFIG_APIC) += lapic.o ioapic.o
obj-$(CONFIG_$(SPL_TPL_)X86_32BIT_INIT) += irq.o
+obj-$(CONFIG_$(SPL_TPL_)ACPI_GPE) += acpi_gpe.o
obj-$(CONFIG_QFW) += qfw_cpu.o
ifndef CONFIG_$(SPL_)X86_64
obj-$(CONFIG_SMP) += mp_init.o
diff --git a/arch/x86/cpu/acpi_gpe.c b/arch/x86/cpu/acpi_gpe.c
new file mode 100644
index 0000000..5500545
--- /dev/null
+++ b/arch/x86/cpu/acpi_gpe.c
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 Google, LLC
+ * Written by Simon Glass <sjg@chromium.org>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <irq.h>
+#include <asm/io.h>
+
+/**
+ * struct acpi_gpe_priv - private driver information
+ *
+ * @acpi_base: Base I/O address of ACPI registers
+ */
+struct acpi_gpe_priv {
+ ulong acpi_base;
+};
+
+#define GPE0_STS(x) (0x20 + ((x) * 4))
+
+static int acpi_gpe_read_and_clear(struct irq *irq)
+{
+ struct acpi_gpe_priv *priv = dev_get_priv(irq->dev);
+ u32 mask, sts;
+ ulong start;
+ int ret = 0;
+ int bank;
+
+ bank = irq->id / 32;
+ mask = 1 << (irq->id % 32);
+
+ /* Wait up to 1ms for GPE status to clear */
+ start = get_timer(0);
+ do {
+ if (get_timer(start) > 1)
+ return ret;
+
+ sts = inl(priv->acpi_base + GPE0_STS(bank));
+ if (sts & mask) {
+ outl(mask, priv->acpi_base + GPE0_STS(bank));
+ ret = 1;
+ }
+ } while (sts & mask);
+
+ return ret;
+}
+
+static int acpi_gpe_ofdata_to_platdata(struct udevice *dev)
+{
+ struct acpi_gpe_priv *priv = dev_get_priv(dev);
+
+ priv->acpi_base = dev_read_addr(dev);
+ if (!priv->acpi_base || priv->acpi_base == FDT_ADDR_T_NONE)
+ return log_msg_ret("acpi_base", -EINVAL);
+
+ return 0;
+}
+
+static int acpi_gpe_of_xlate(struct irq *irq, struct ofnode_phandle_args *args)
+{
+ irq->id = args->args[0];
+
+ return 0;
+}
+
+static const struct irq_ops acpi_gpe_ops = {
+ .read_and_clear = acpi_gpe_read_and_clear,
+ .of_xlate = acpi_gpe_of_xlate,
+};
+
+static const struct udevice_id acpi_gpe_ids[] = {
+ { .compatible = "intel,acpi-gpe", .data = X86_IRQT_ACPI_GPE },
+ { }
+};
+
+U_BOOT_DRIVER(acpi_gpe_drv) = {
+ .name = "acpi_gpe",
+ .id = UCLASS_IRQ,
+ .of_match = acpi_gpe_ids,
+ .ops = &acpi_gpe_ops,
+ .ofdata_to_platdata = acpi_gpe_ofdata_to_platdata,
+ .priv_auto_alloc_size = sizeof(struct acpi_gpe_priv),
+};