phy: marvell: cp110: update utmi phy connection type
UTMI_PHY_TO_USB_HOST was used in USB3 UTMI dts node only, but there will
be USB2 UTMI dts node for some SoCs that have got USB2 controller, so rename
TO_USB_HOST to TO_USB3_HOST to distinguish TO_USB2_HOST in later on patches.
Signed-off-by: zachary <zhangzg@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Igal Liberman <igall@marvell.com>
Reviewed-by: Stefan Roese <sr@denx.de>
diff --git a/arch/arm/dts/armada-cp110-master.dtsi b/arch/arm/dts/armada-cp110-master.dtsi
index 56c1a12..8c336f2 100644
--- a/arch/arm/dts/armada-cp110-master.dtsi
+++ b/arch/arm/dts/armada-cp110-master.dtsi
@@ -253,7 +253,7 @@
reg = <0x580000 0x1000>, /* utmi-unit */
<0x440420 0x4>, /* usb-cfg */
<0x440440 0x4>; /* utmi-cfg */
- utmi-port = <UTMI_PHY_TO_USB_HOST0>;
+ utmi-port = <UTMI_PHY_TO_USB3_HOST0>;
status = "disabled";
};
@@ -262,7 +262,7 @@
reg = <0x581000 0x1000>, /* utmi-unit */
<0x440420 0x4>, /* usb-cfg */
<0x440444 0x4>; /* utmi-cfg */
- utmi-port = <UTMI_PHY_TO_USB_HOST1>;
+ utmi-port = <UTMI_PHY_TO_USB3_HOST1>;
status = "disabled";
};
diff --git a/arch/arm/dts/armada-cp110-slave.dtsi b/arch/arm/dts/armada-cp110-slave.dtsi
index 5876391..0cdb3d3 100644
--- a/arch/arm/dts/armada-cp110-slave.dtsi
+++ b/arch/arm/dts/armada-cp110-slave.dtsi
@@ -254,7 +254,7 @@
reg = <0x580000 0x1000>, /* utmi-unit */
<0x440420 0x4>, /* usb-cfg */
<0x440440 0x4>; /* utmi-cfg */
- utmi-port = <UTMI_PHY_TO_USB_HOST0>;
+ utmi-port = <UTMI_PHY_TO_USB3_HOST0>;
status = "disabled";
};
};
diff --git a/drivers/phy/marvell/comphy_cp110.c b/drivers/phy/marvell/comphy_cp110.c
index 70554fe..8bec0ab 100644
--- a/drivers/phy/marvell/comphy_cp110.c
+++ b/drivers/phy/marvell/comphy_cp110.c
@@ -1304,7 +1304,7 @@
* If UTMI connected to USB Device, configure mux prior to PHY init
* (Device can be connected to UTMI0 or to UTMI1)
*/
- if (utmi_phy_port == UTMI_PHY_TO_USB_DEVICE0) {
+ if (utmi_phy_port == UTMI_PHY_TO_USB3_DEVICE0) {
debug("stage: UTMI %d - Enable Device mode and configure UTMI mux\n",
utmi_index);
/* USB3 Device UTMI enable */
@@ -1496,7 +1496,8 @@
continue;
}
printf("UTMI PHY %d initialized to ", i);
- if (cp110_utmi_data[i].utmi_phy_port == UTMI_PHY_TO_USB_DEVICE0)
+ if (cp110_utmi_data[i].utmi_phy_port ==
+ UTMI_PHY_TO_USB3_DEVICE0)
printf("USB Device\n");
else
printf("USB Host%d\n",
diff --git a/include/dt-bindings/comphy/comphy_data.h b/include/dt-bindings/comphy/comphy_data.h
index 8fd578a..d127388 100644
--- a/include/dt-bindings/comphy/comphy_data.h
+++ b/include/dt-bindings/comphy/comphy_data.h
@@ -52,9 +52,9 @@
#define PHY_POLARITY_ALL_INVERT \
(PHY_POLARITY_TXD_INVERT | PHY_POLARITY_RXD_INVERT)
-#define UTMI_PHY_TO_USB_HOST0 0
-#define UTMI_PHY_TO_USB_HOST1 1
-#define UTMI_PHY_TO_USB_DEVICE0 2
+#define UTMI_PHY_TO_USB3_HOST0 0
+#define UTMI_PHY_TO_USB3_HOST1 1
+#define UTMI_PHY_TO_USB3_DEVICE0 2
#define UTMI_PHY_INVALID 0xff
#endif /* _COMPHY_DATA_H_ */