Add multi chip support to the FSL-UPM driver
This patch adds support for multi-chip NAND devices to the FSL-UPM
driver. The "dev_ready" callback of the "struct fsl_upm_nand" is now
called with the argument "chip_nr" to allow testing the proper chip
select line. The NAND support of the MPC8360ERDK is updated as well.
No other boards are currently using the FSL UPM driver.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
diff --git a/drivers/mtd/nand/fsl_upm.c b/drivers/mtd/nand/fsl_upm.c
index 1a1d8c4..73abbba 100644
--- a/drivers/mtd/nand/fsl_upm.c
+++ b/drivers/mtd/nand/fsl_upm.c
@@ -31,26 +31,45 @@
eieio();
}
-static void fsl_upm_run_pattern(struct fsl_upm *upm, int width, u32 cmd)
+static void fsl_upm_run_pattern(struct fsl_upm *upm, int width,
+ void __iomem *io_addr, u32 mar)
{
- out_be32(upm->mar, cmd << (32 - width));
+ out_be32(upm->mar, mar);
switch (width) {
case 8:
- out_8(upm->io_addr, 0x0);
+ out_8(io_addr, 0x0);
break;
case 16:
- out_be16(upm->io_addr, 0x0);
+ out_be16(io_addr, 0x0);
break;
case 32:
- out_be32(upm->io_addr, 0x0);
+ out_be32(io_addr, 0x0);
break;
}
}
+#if CONFIG_SYS_NAND_MAX_CHIPS > 1
+static void fun_select_chip(struct mtd_info *mtd, int chip_nr)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct fsl_upm_nand *fun = chip->priv;
+
+ if (chip_nr >= 0) {
+ fun->chip_nr = chip_nr;
+ chip->IO_ADDR_R = chip->IO_ADDR_W =
+ fun->upm.io_addr + fun->chip_offset * chip_nr;
+ } else if (chip_nr == -1) {
+ chip->cmd_ctrl(mtd, NAND_CMD_NONE, 0 | NAND_CTRL_CHANGE);
+ }
+}
+#endif
+
static void fun_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
struct nand_chip *chip = mtd->priv;
struct fsl_upm_nand *fun = chip->priv;
+ void __iomem *io_addr;
+ u32 mar;
if (!(ctrl & fun->last_ctrl)) {
fsl_upm_end_pattern(&fun->upm);
@@ -68,7 +87,13 @@
fsl_upm_start_pattern(&fun->upm, fun->upm_cmd_offset);
}
- fsl_upm_run_pattern(&fun->upm, fun->width, cmd);
+ mar = cmd << (32 - fun->width);
+ io_addr = fun->upm.io_addr;
+#if CONFIG_SYS_NAND_MAX_CHIPS > 1
+ if (fun->chip_nr > 0)
+ io_addr += fun->chip_offset * fun->chip_nr;
+#endif
+ fsl_upm_run_pattern(&fun->upm, fun->width, io_addr, mar);
/*
* Some boards/chips needs this. At least on MPC8360E-RDK we
@@ -77,7 +102,7 @@
* 0-2 unexpected busy states per block read.
*/
if (fun->wait_pattern) {
- while (!fun->dev_ready())
+ while (!fun->dev_ready(fun->chip_nr))
debug("unexpected busy state\n");
}
}
@@ -125,7 +150,7 @@
struct nand_chip *chip = mtd->priv;
struct fsl_upm_nand *fun = chip->priv;
- return fun->dev_ready();
+ return fun->dev_ready(fun->chip_nr);
}
int fsl_upm_nand_init(struct nand_chip *chip, struct fsl_upm_nand *fun)
@@ -139,6 +164,9 @@
chip->chip_delay = fun->chip_delay;
chip->ecc.mode = NAND_ECC_SOFT;
chip->cmd_ctrl = fun_cmd_ctrl;
+#if CONFIG_SYS_NAND_MAX_CHIPS > 1
+ chip->select_chip = fun_select_chip;
+#endif
chip->read_byte = nand_read_byte;
chip->read_buf = nand_read_buf;
chip->write_buf = nand_write_buf;