arm: K3: Disable ROM configured firewalls
ROM configures certain firewalls based on its usage, which includes
the one in front of boot peripherals. In specific case of boot
peripherals, ROM does not open up the full address space corresponding
to the peripherals. Like in OSPI, ROM only configures the firewall region
for 32 bit address space and mark 64bit address space flash regions
as in-accessible.
When security-cfg is initialized by sysfw, all the non-configured
firewalls are kept in bypass state using a global setting. Since ROM
configured firewalls for certain peripherals, these will not be touched.
So when bootloader touches any of the address space that ROM marked as
in-accessible, system raises a firewall exception causing boot hang.
It would have been ideal if sysfw cleans up the ROM configured boot
peripheral firewalls. Given the memory overhead to store this
information provided by ROM and the boot time increase in re configuring
the firewalls, it is concluded to clean this up in bootloaders.
So disable all the firewalls that ROM doesn't open up the full address
space.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Venkateswara Rao Mandela <venkat.mandela@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
diff --git a/arch/arm/mach-k3/am6_init.c b/arch/arm/mach-k3/am6_init.c
index c5da965..8d107b8 100644
--- a/arch/arm/mach-k3/am6_init.c
+++ b/arch/arm/mach-k3/am6_init.c
@@ -19,6 +19,26 @@
#include <linux/soc/ti/ti_sci_protocol.h>
#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_K3_LOAD_SYSFW
+#ifdef CONFIG_TI_SECURE_DEVICE
+struct fwl_data main_cbass_fwls[] = {
+ { "MMCSD1_CFG", 2057, 1 },
+ { "MMCSD0_CFG", 2058, 1 },
+ { "USB3SS0_SLV0", 2176, 2 },
+ { "PCIE0_SLV", 2336, 8 },
+ { "PCIE1_SLV", 2337, 8 },
+ { "PCIE0_CFG", 2688, 1 },
+ { "PCIE1_CFG", 2689, 1 },
+}, mcu_cbass_fwls[] = {
+ { "MCU_ARMSS0_CORE0_SLV", 1024, 1 },
+ { "MCU_ARMSS0_CORE1_SLV", 1028, 1 },
+ { "MCU_FSS0_S1", 1033, 8 },
+ { "MCU_FSS0_S0", 1036, 8 },
+ { "MCU_CPSW0", 1220, 1 },
+};
+#endif
+#endif
+
static void mmr_unlock(u32 base, u32 partition)
{
/* Translate the base address */
@@ -109,6 +129,12 @@
* output.
*/
k3_sysfw_loader(preloader_console_init);
+
+ /* Disable ROM configured firewalls right after loading sysfw */
+#ifdef CONFIG_TI_SECURE_DEVICE
+ remove_fwl_configs(main_cbass_fwls, ARRAY_SIZE(main_cbass_fwls));
+ remove_fwl_configs(mcu_cbass_fwls, ARRAY_SIZE(mcu_cbass_fwls));
+#endif
#else
/* Prepare console output */
preloader_console_init();