Fix spelling of "occurred".
Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
diff --git a/drivers/ddr/marvell/a38x/ddr3_init.h b/drivers/ddr/marvell/a38x/ddr3_init.h
index cb3fb24..8cb0886 100644
--- a/drivers/ddr/marvell/a38x/ddr3_init.h
+++ b/drivers/ddr/marvell/a38x/ddr3_init.h
@@ -120,7 +120,7 @@
#define MV_NO_RESOURCE (0x13) /* Resource not available (memory ...) */
#define MV_FULL (0x14) /* Item is full (Queue or table etc...) */
#define MV_EMPTY (0x15) /* Item is empty (Queue or table etc...) */
-#define MV_INIT_ERROR (0x16) /* Error occured while INIT process */
+#define MV_INIT_ERROR (0x16) /* Error occurred while INIT process */
#define MV_HW_ERROR (0x17) /* Hardware error */
#define MV_TX_ERROR (0x18) /* Transmit operation not succeeded */
#define MV_RX_ERROR (0x19) /* Recieve operation not succeeded */
diff --git a/drivers/ddr/marvell/axp/ddr3_hw_training.h b/drivers/ddr/marvell/axp/ddr3_hw_training.h
index cffa7c4..343a6b6 100644
--- a/drivers/ddr/marvell/axp/ddr3_hw_training.h
+++ b/drivers/ddr/marvell/axp/ddr3_hw_training.h
@@ -41,7 +41,7 @@
#define MV_NO_RESOURCE (0x13) /* Resource not available (memory ...) */
#define MV_FULL (0x14) /* Item is full (Queue or table etc...) */
#define MV_EMPTY (0x15) /* Item is empty (Queue or table etc...) */
-#define MV_INIT_ERROR (0x16) /* Error occured while INIT process */
+#define MV_INIT_ERROR (0x16) /* Error occurred while INIT process */
#define MV_HW_ERROR (0x17) /* Hardware error */
#define MV_TX_ERROR (0x18) /* Transmit operation not succeeded */
#define MV_RX_ERROR (0x19) /* Recieve operation not succeeded */
diff --git a/drivers/i2c/kona_i2c.c b/drivers/i2c/kona_i2c.c
index 9af496b..11f29d9 100644
--- a/drivers/i2c/kona_i2c.c
+++ b/drivers/i2c/kona_i2c.c
@@ -381,7 +381,7 @@
return -EREMOTEIO;
}
- /* Check if a timeout occured */
+ /* Check if a timeout occurred */
if (!time_left) {
printf("completion timed out\n");
return -EREMOTEIO;
diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c
index 4814fa2..6a45d28 100644
--- a/drivers/mtd/nand/omap_gpmc.c
+++ b/drivers/mtd/nand/omap_gpmc.c
@@ -106,7 +106,7 @@
/*
* omap_correct_data - Compares the ecc read from nand spare area with ECC
- * registers values and corrects one bit error if it has occured
+ * registers values and corrects one bit error if it has occurred
* Further details can be had from OMAP TRM and the following selected links:
* http://en.wikipedia.org/wiki/Hamming_code
* http://www.cs.utexas.edu/users/plaxton/c/337/05f/slides/ErrorCorrection-4.pdf
@@ -479,7 +479,7 @@
/*
* omap_correct_data_bch - Compares the ecc read from nand spare area
- * with ECC registers values and corrects one bit error if it has occured
+ * with ECC registers values and corrects one bit error if it has occurred
*
* @mtd: MTD device structure
* @dat: page data
diff --git a/drivers/net/4xx_enet.c b/drivers/net/4xx_enet.c
index 3c30f42..bc52ed3 100644
--- a/drivers/net/4xx_enet.c
+++ b/drivers/net/4xx_enet.c
@@ -1726,7 +1726,7 @@
mtdcr (MAL0_RXDEIR, 0x80000000);
#ifdef INFO_4XX_ENET
- printf("\nMAL error occured.... ISR = %lx UIC = = %lx MAL_DEF = %lx MAL_ERR= %lx\n",
+ printf("\nMAL error occurred.... ISR = %lx UIC = = %lx MAL_DEF = %lx MAL_ERR= %lx\n",
isr, uic, maldef, mal_errr);
#endif
@@ -1740,7 +1740,7 @@
{
EMAC_4XX_HW_PST hw_p = dev->priv;
- printf ("EMAC%d error occured.... ISR = %lx\n", hw_p->devnum, isr);
+ printf ("EMAC%d error occurred.... ISR = %lx\n", hw_p->devnum, isr);
out_be32((void *)EMAC0_ISR + hw_p->hw_addr, isr);
}
diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c
index 59ea11c..611eabb 100644
--- a/drivers/net/enc28j60.c
+++ b/drivers/net/enc28j60.c
@@ -381,7 +381,7 @@
udelay(1000);
}
- /* timeout occured */
+ /* timeout occurred */
printf("%s: link down\n", enc->dev->name);
return 1;
}
diff --git a/drivers/net/ne2000_base.c b/drivers/net/ne2000_base.c
index 71d133c..67bf140 100644
--- a/drivers/net/ne2000_base.c
+++ b/drivers/net/ne2000_base.c
@@ -582,7 +582,7 @@
/*
* Read in as many packets as we can and acknowledge any and receive
* interrupts. Since the buffer has overflowed, a receive event of
- * some kind will have occured.
+ * some kind will have occurred.
*/
dp83902a_RxEvent();
DP_OUT(base, DP_ISR, DP_ISR_RxP|DP_ISR_RxE);
@@ -592,7 +592,7 @@
DP_OUT(base, DP_TCR, DP_TCR_NORMAL);
/*
- * If a transmit command was issued, but no transmit event has occured,
+ * If a transmit command was issued, but no transmit event has occurred,
* restart it here.
*/
DP_IN(base, DP_ISR, isr);
diff --git a/drivers/usb/gadget/mpc8xx_udc.c b/drivers/usb/gadget/mpc8xx_udc.c
index b3e178a..ad5ea7a 100644
--- a/drivers/usb/gadget/mpc8xx_udc.c
+++ b/drivers/usb/gadget/mpc8xx_udc.c
@@ -170,7 +170,7 @@
/* udc_irq
*
- * Poll for whatever events may have occured
+ * Poll for whatever events may have occurred
*/
void udc_irq (void)
{
diff --git a/drivers/usb/musb/musb_hcd.c b/drivers/usb/musb/musb_hcd.c
index 9a3b61a..4947936 100644
--- a/drivers/usb/musb/musb_hcd.c
+++ b/drivers/usb/musb/musb_hcd.c
@@ -73,9 +73,9 @@
}
/*
- * This function checks if RxStall has occured on the endpoint. If a RxStall
- * has occured, the RxStall is cleared and 1 is returned. If RxStall has
- * not occured, 0 is returned.
+ * This function checks if RxStall has occurred on the endpoint. If a RxStall
+ * has occurred, the RxStall is cleared and 1 is returned. If RxStall has
+ * not occurred, 0 is returned.
*/
static u8 check_stall(u8 ep, u8 dir_out)
{