net: smc911x: Inline all functions from header file

Inline all the functions from the header file, as they are not used
outside of the driver or the standalone EEPROM example.

Note that this does introduce considerable amount of duplication in
the standalone EEPROM example, however that one has to be rewritten
anyway, roughly such that the SMC911x driver would expose DM EEPROM
interface and the standalone example would use that.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
diff --git a/examples/standalone/smc911x_eeprom.c b/examples/standalone/smc911x_eeprom.c
index 2c05ed9..19ad9e6 100644
--- a/examples/standalone/smc911x_eeprom.c
+++ b/examples/standalone/smc911x_eeprom.c
@@ -18,8 +18,164 @@
 #include <console.h>
 #include <exports.h>
 #include <linux/ctype.h>
+#include <linux/types.h>
 #include "../drivers/net/smc911x.h"
 
+#define DRIVERNAME "smc911x"
+
+#if defined (CONFIG_SMC911X_32_BIT) && \
+	defined (CONFIG_SMC911X_16_BIT)
+#error "SMC911X: Only one of CONFIG_SMC911X_32_BIT and \
+	CONFIG_SMC911X_16_BIT shall be set"
+#endif
+
+struct chip_id {
+	u16 id;
+	char *name;
+};
+
+static const struct chip_id chip_ids[] =  {
+	{ CHIP_89218, "LAN89218" },
+	{ CHIP_9115, "LAN9115" },
+	{ CHIP_9116, "LAN9116" },
+	{ CHIP_9117, "LAN9117" },
+	{ CHIP_9118, "LAN9118" },
+	{ CHIP_9211, "LAN9211" },
+	{ CHIP_9215, "LAN9215" },
+	{ CHIP_9216, "LAN9216" },
+	{ CHIP_9217, "LAN9217" },
+	{ CHIP_9218, "LAN9218" },
+	{ CHIP_9220, "LAN9220" },
+	{ CHIP_9221, "LAN9221" },
+	{ 0, NULL },
+};
+
+#if defined (CONFIG_SMC911X_32_BIT)
+static inline u32 __smc911x_reg_read(struct eth_device *dev, u32 offset)
+{
+	return *(volatile u32*)(dev->iobase + offset);
+}
+u32 smc911x_reg_read(struct eth_device *dev, u32 offset)
+	__attribute__((weak, alias("__smc911x_reg_read")));
+
+static inline void __smc911x_reg_write(struct eth_device *dev,
+					u32 offset, u32 val)
+{
+	*(volatile u32*)(dev->iobase + offset) = val;
+}
+void smc911x_reg_write(struct eth_device *dev, u32 offset, u32 val)
+	__attribute__((weak, alias("__smc911x_reg_write")));
+#elif defined (CONFIG_SMC911X_16_BIT)
+static inline u32 smc911x_reg_read(struct eth_device *dev, u32 offset)
+{
+	volatile u16 *addr_16 = (u16 *)(dev->iobase + offset);
+	return ((*addr_16 & 0x0000ffff) | (*(addr_16 + 1) << 16));
+}
+static inline void smc911x_reg_write(struct eth_device *dev,
+					u32 offset, u32 val)
+{
+	*(volatile u16 *)(dev->iobase + offset) = (u16)val;
+	*(volatile u16 *)(dev->iobase + offset + 2) = (u16)(val >> 16);
+}
+#else
+#error "SMC911X: undefined bus width"
+#endif /* CONFIG_SMC911X_16_BIT */
+
+static u32 smc911x_get_mac_csr(struct eth_device *dev, u8 reg)
+{
+	while (smc911x_reg_read(dev, MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY)
+		;
+	smc911x_reg_write(dev, MAC_CSR_CMD,
+			MAC_CSR_CMD_CSR_BUSY | MAC_CSR_CMD_R_NOT_W | reg);
+	while (smc911x_reg_read(dev, MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY)
+		;
+
+	return smc911x_reg_read(dev, MAC_CSR_DATA);
+}
+
+static void smc911x_set_mac_csr(struct eth_device *dev, u8 reg, u32 data)
+{
+	while (smc911x_reg_read(dev, MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY)
+		;
+	smc911x_reg_write(dev, MAC_CSR_DATA, data);
+	smc911x_reg_write(dev, MAC_CSR_CMD, MAC_CSR_CMD_CSR_BUSY | reg);
+	while (smc911x_reg_read(dev, MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY)
+		;
+}
+
+static int smc911x_detect_chip(struct eth_device *dev)
+{
+	unsigned long val, i;
+
+	val = smc911x_reg_read(dev, BYTE_TEST);
+	if (val == 0xffffffff) {
+		/* Special case -- no chip present */
+		return -1;
+	} else if (val != 0x87654321) {
+		printf(DRIVERNAME ": Invalid chip endian 0x%08lx\n", val);
+		return -1;
+	}
+
+	val = smc911x_reg_read(dev, ID_REV) >> 16;
+	for (i = 0; chip_ids[i].id != 0; i++) {
+		if (chip_ids[i].id == val) break;
+	}
+	if (!chip_ids[i].id) {
+		printf(DRIVERNAME ": Unknown chip ID %04lx\n", val);
+		return -1;
+	}
+
+	dev->priv = (void *)&chip_ids[i];
+
+	return 0;
+}
+
+static void smc911x_reset(struct eth_device *dev)
+{
+	int timeout;
+
+	/*
+	 *  Take out of PM setting first
+	 *  Device is already wake up if PMT_CTRL_READY bit is set
+	 */
+	if ((smc911x_reg_read(dev, PMT_CTRL) & PMT_CTRL_READY) == 0) {
+		/* Write to the bytetest will take out of powerdown */
+		smc911x_reg_write(dev, BYTE_TEST, 0x0);
+
+		timeout = 10;
+
+		while (timeout-- &&
+			!(smc911x_reg_read(dev, PMT_CTRL) & PMT_CTRL_READY))
+			udelay(10);
+		if (timeout < 0) {
+			printf(DRIVERNAME
+				": timeout waiting for PM restore\n");
+			return;
+		}
+	}
+
+	/* Disable interrupts */
+	smc911x_reg_write(dev, INT_EN, 0);
+
+	smc911x_reg_write(dev, HW_CFG, HW_CFG_SRST);
+
+	timeout = 1000;
+	while (timeout-- && smc911x_reg_read(dev, E2P_CMD) & E2P_CMD_EPC_BUSY)
+		udelay(10);
+
+	if (timeout < 0) {
+		printf(DRIVERNAME ": reset timeout\n");
+		return;
+	}
+
+	/* Reset the FIFO level and flow control settings */
+	smc911x_set_mac_csr(dev, FLOW, FLOW_FCPT | FLOW_FCEN);
+	smc911x_reg_write(dev, AFC_CFG, 0x0050287F);
+
+	/* Set to LED outputs */
+	smc911x_reg_write(dev, GPIO_CFG, 0x70070000);
+}
+
 /**
  *	smsc_ctrlc - detect press of CTRL+C (common ctrlc() isnt exported!?)
  */