i2c: Drop use of CONFIG_I2C_HARD
This option is pretty old. It predates CONFIG_SYS_I2C which is itself
deprecated in favour of driver model. Disable it for all boards.
Also drop I2C options which depend on this.
Signed-off-by: Simon Glass <sjg@chromium.org>
diff --git a/board/cm5200/cmd_cm5200.c b/board/cm5200/cmd_cm5200.c
index 9c40ad7..60097dc 100644
--- a/board/cm5200/cmd_cm5200.c
+++ b/board/cm5200/cmd_cm5200.c
@@ -13,34 +13,6 @@
#ifdef CONFIG_CMD_BSP
-static int do_i2c_test(char * const argv[])
-{
- unsigned char temp, temp1;
-
- printf("Starting I2C Test\n"
- "Please set Jumper:\nI2C SDA 2-3\nI2C SCL 2-3\n\n"
- "Please press any key to start\n\n");
- getc();
-
- temp = 0xf0; /* set io 0-4 as output */
- i2c_write(CONFIG_SYS_I2C_IO, 3, 1, (uchar *)&temp, 1);
-
- printf("Press I2C4-7. LED I2C0-3 should have the same state\n\n"
- "Press any key to stop\n\n");
-
- while (!tstc()) {
- i2c_read(CONFIG_SYS_I2C_IO, 0, 1, (uchar *)&temp, 1);
- temp1 = (temp >> 4) & 0x03;
- temp1 |= (temp >> 3) & 0x08; /* S302 -> LED303 */
- temp1 |= (temp >> 5) & 0x04; /* S303 -> LED302 */
- temp = temp1;
- i2c_write(CONFIG_SYS_I2C_IO, 1, 1, (uchar *)&temp, 1);
- }
- getc();
-
- return 0;
-}
-
static int do_usb_test(char * const argv[])
{
int i;
@@ -387,9 +359,7 @@
switch (argc) {
case 2:
- if (strncmp(argv[1], "i2c", 3) == 0)
- rcode = do_i2c_test(argv);
- else if (strncmp(argv[1], "led", 3) == 0)
+ if (strncmp(argv[1], "led", 3) == 0)
rcode = do_led_test(argv);
else if (strncmp(argv[1], "usb", 3) == 0)
rcode = do_usb_test(argv);