powerpc/mpc8xxx: fix workaround for errata DDR111 and DDR134
The fix for errata workaround is to avoid covering physical address
0xff000000 to 0xffffffff during the implementation.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
index 73b320b..c8c84a1 100644
--- a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
+++ b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
@@ -24,6 +24,8 @@
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
volatile ccsr_local_ecm_t *ecm = (void *)CONFIG_SYS_MPC85xx_ECM_ADDR;
u32 total_gb_size_per_controller;
+ unsigned int csn_bnds_backup = 0, cs_sa, cs_ea, *csn_bnds_t;
+ int csn = -1;
#endif
switch (ctrl_num) {
@@ -40,6 +42,22 @@
out_be32(&ddr->eor, regs->ddr_eor);
+#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
+ for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+ cs_sa = (regs->cs[i].bnds >> 16) & 0xfff;
+ cs_ea = regs->cs[i].bnds & 0xfff;
+ if ((cs_sa <= 0xff) && (cs_ea >= 0xff)) {
+ csn = i;
+ csn_bnds_backup = regs->cs[i].bnds;
+ csn_bnds_t = (unsigned int *) ®s->cs[i].bnds;
+ *csn_bnds_t = regs->cs[i].bnds ^ 0x0F000F00;
+ debug("Found cs%d_bns (0x%08x) covering 0xff000000, "
+ "change it to 0x%x\n",
+ csn, csn_bnds_backup, regs->cs[i].bnds);
+ break;
+ }
+ }
+#endif
for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
if (i == 0) {
out_be32(&ddr->cs0_bnds, regs->cs[i].bnds);
@@ -308,5 +326,28 @@
/* 10. Clear EEBACR[3] */
clrbits_be32(&ecm->eebacr, 10000000);
debug("Clearing EEBACR[3] to 0x%08x\n", in_be32(&ecm->eebacr));
+
+ if (csn != -1) {
+ csn_bnds_t = (unsigned int *) ®s->cs[csn].bnds;
+ *csn_bnds_t = csn_bnds_backup;
+ debug("Change cs%d_bnds back to 0x%08x\n",
+ csn, regs->cs[csn].bnds);
+ setbits_be32(&ddr->sdram_cfg, 0x2); /* MEM_HALT */
+ switch (csn) {
+ case 0:
+ out_be32(&ddr->cs0_bnds, regs->cs[csn].bnds);
+ break;
+ case 1:
+ out_be32(&ddr->cs1_bnds, regs->cs[csn].bnds);
+ break;
+ case 2:
+ out_be32(&ddr->cs2_bnds, regs->cs[csn].bnds);
+ break;
+ case 3:
+ out_be32(&ddr->cs3_bnds, regs->cs[csn].bnds);
+ break;
+ }
+ clrbits_be32(&ddr->sdram_cfg, 0x2);
+ }
#endif /* CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 */
}