Patches by Stephan Linz, 30 Jan 2004:
1: - board/altera/common/flash.c:flash_erase():
o allow interrupts befor get_timer() call
o check-up each erased sector and avoid unexpected timeouts
- board/altera/dk1c20/dk1s10.c:board_early_init_f():
o enclose sevenseg_set() in cpp condition
- remove the ASMI configuration for DK1S10_standard_32 (never present)
- fix some typed in mistakes in the NIOS documentation
2: - split DK1C20 configuration into several header files:
o two new files for each NIOS CPU description
o U-Boot related part is remaining in DK1C20.h
3: - split DK1S10 configuration into several header files:
o two new files for each NIOS CPU description
o U-Boot related part is remaining in DK1S10.h
4: - Add support for the Microtronix Linux Development Kit
NIOS CPU configuration at the Altera Nios Development Kit,
Stratix Edition (DK-1S10)
5: - Add documentation for the Altera Nios Development Kit,
Stratix Edition (DK-1S10)
6: - Add support for the Nios Serial Peripharel Interface (SPI)
(master only)
7: - Add support for the common U-Boot SPI framework at
RTC driver DS1306
diff --git a/doc/README.dk1c20 b/doc/README.dk1c20
index bf3b699..3c0e41b 100644
--- a/doc/README.dk1c20
+++ b/doc/README.dk1c20
@@ -24,7 +24,7 @@
1. Files
=========
- board/dk1c20/*
+ board/altera/dk1c20/*
include/configs/DK1C20.h
2. Memory Organization
@@ -73,11 +73,7 @@
2. Quit nios-run and start your terminal application (e.g. start
Hyperterminal or minicom).
-3. From the U-Boot command prompt, erase flash 0x40000 to 0x 5ffff:
-
- ==> erase 1:4-5
-
-4. Download the u-boot code to RAM. When using Hyperterminal, do the
+3. Download the u-boot code to RAM. When using Hyperterminal, do the
following:
a. From the u-boot command prompt start a binary download to SRAM:
@@ -86,6 +82,10 @@
b. Download u-boot.bin using kermit.
+4. From the U-Boot command prompt, erase flash 0x40000 to 0x5ffff:
+
+ ==> erase 1:4-5
+
5. Copy the binary image from SRAM to flash:
==> cp.b 800000 40000 10000