| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2014 - 2022, Xilinx, Inc. |
| * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc. |
| * |
| * Michal Simek <michal.simek@amd.com> |
| */ |
| |
| #include <common.h> |
| #include <efi.h> |
| #include <efi_loader.h> |
| #include <env.h> |
| #include <image.h> |
| #include <init.h> |
| #include <lmb.h> |
| #include <log.h> |
| #include <asm/global_data.h> |
| #include <asm/sections.h> |
| #include <dm/uclass.h> |
| #include <i2c.h> |
| #include <linux/sizes.h> |
| #include <malloc.h> |
| #include "board.h" |
| #include <dm.h> |
| #include <i2c_eeprom.h> |
| #include <net.h> |
| #include <generated/dt.h> |
| #include <slre.h> |
| #include <soc.h> |
| #include <linux/ctype.h> |
| #include <linux/kernel.h> |
| #include <uuid.h> |
| |
| #include "fru.h" |
| |
| #if IS_ENABLED(CONFIG_EFI_HAVE_CAPSULE_SUPPORT) |
| struct efi_fw_image fw_images[] = { |
| #if defined(XILINX_BOOT_IMAGE_GUID) |
| { |
| .image_type_id = XILINX_BOOT_IMAGE_GUID, |
| .fw_name = u"XILINX-BOOT", |
| .image_index = 1, |
| }, |
| #endif |
| #if defined(XILINX_UBOOT_IMAGE_GUID) |
| { |
| .image_type_id = XILINX_UBOOT_IMAGE_GUID, |
| .fw_name = u"XILINX-UBOOT", |
| .image_index = 2, |
| }, |
| #endif |
| }; |
| |
| struct efi_capsule_update_info update_info = { |
| .images = fw_images, |
| }; |
| |
| u8 num_image_type_guids = ARRAY_SIZE(fw_images); |
| #endif /* EFI_HAVE_CAPSULE_SUPPORT */ |
| |
| #define EEPROM_HEADER_MAGIC 0xdaaddeed |
| #define EEPROM_HDR_MANUFACTURER_LEN 16 |
| #define EEPROM_HDR_NAME_LEN 16 |
| #define EEPROM_HDR_REV_LEN 8 |
| #define EEPROM_HDR_SERIAL_LEN 20 |
| #define EEPROM_HDR_NO_OF_MAC_ADDR 4 |
| #define EEPROM_HDR_ETH_ALEN ETH_ALEN |
| #define EEPROM_HDR_UUID_LEN 16 |
| |
| struct xilinx_board_description { |
| u32 header; |
| char manufacturer[EEPROM_HDR_MANUFACTURER_LEN + 1]; |
| char name[EEPROM_HDR_NAME_LEN + 1]; |
| char revision[EEPROM_HDR_REV_LEN + 1]; |
| char serial[EEPROM_HDR_SERIAL_LEN + 1]; |
| u8 mac_addr[EEPROM_HDR_NO_OF_MAC_ADDR][EEPROM_HDR_ETH_ALEN + 1]; |
| char uuid[EEPROM_HDR_UUID_LEN + 1]; |
| }; |
| |
| static int highest_id = -1; |
| static struct xilinx_board_description *board_info; |
| |
| #define XILINX_I2C_DETECTION_BITS sizeof(struct fru_common_hdr) |
| |
| /* Variable which stores pointer to array which stores eeprom content */ |
| struct xilinx_legacy_format { |
| char board_sn[18]; /* 0x0 */ |
| char unused0[14]; /* 0x12 */ |
| char eth_mac[ETH_ALEN]; /* 0x20 */ |
| char unused1[170]; /* 0x26 */ |
| char board_name[11]; /* 0xd0 */ |
| char unused2[5]; /* 0xdc */ |
| char board_revision[3]; /* 0xe0 */ |
| char unused3[29]; /* 0xe3 */ |
| }; |
| |
| static void xilinx_eeprom_legacy_cleanup(char *eeprom, int size) |
| { |
| int i; |
| unsigned char byte; |
| |
| for (i = 0; i < size; i++) { |
| byte = eeprom[i]; |
| |
| /* Remove all non printable chars but ignore MAC address */ |
| if ((i < offsetof(struct xilinx_legacy_format, eth_mac) || |
| i >= offsetof(struct xilinx_legacy_format, unused1)) && |
| (byte < '!' || byte > '~')) { |
| eeprom[i] = 0; |
| continue; |
| } |
| |
| /* Convert strings to lower case */ |
| if (byte >= 'A' && byte <= 'Z') |
| eeprom[i] = byte + 'a' - 'A'; |
| } |
| } |
| |
| static int xilinx_read_eeprom_legacy(struct udevice *dev, char *name, |
| struct xilinx_board_description *desc) |
| { |
| int ret, size; |
| struct xilinx_legacy_format *eeprom_content; |
| bool eth_valid = false; |
| |
| size = sizeof(*eeprom_content); |
| |
| eeprom_content = calloc(1, size); |
| if (!eeprom_content) |
| return -ENOMEM; |
| |
| debug("%s: I2C EEPROM read pass data at %p\n", __func__, |
| eeprom_content); |
| |
| ret = dm_i2c_read(dev, 0, (uchar *)eeprom_content, size); |
| if (ret) { |
| debug("%s: I2C EEPROM read failed\n", __func__); |
| free(eeprom_content); |
| return ret; |
| } |
| |
| xilinx_eeprom_legacy_cleanup((char *)eeprom_content, size); |
| |
| /* Terminating \0 chars are the part of desc fields already */ |
| strlcpy(desc->name, eeprom_content->board_name, |
| sizeof(eeprom_content->board_name) + 1); |
| strlcpy(desc->revision, eeprom_content->board_revision, |
| sizeof(eeprom_content->board_revision) + 1); |
| strlcpy(desc->serial, eeprom_content->board_sn, |
| sizeof(eeprom_content->board_sn) + 1); |
| |
| eth_valid = is_valid_ethaddr((const u8 *)eeprom_content->eth_mac); |
| if (eth_valid) |
| memcpy(desc->mac_addr[0], eeprom_content->eth_mac, ETH_ALEN); |
| |
| printf("Xilinx I2C Legacy format at %s:\n", name); |
| printf(" Board name:\t%s\n", desc->name); |
| printf(" Board rev:\t%s\n", desc->revision); |
| printf(" Board SN:\t%s\n", desc->serial); |
| |
| if (eth_valid) |
| printf(" Ethernet mac:\t%pM\n", desc->mac_addr); |
| |
| desc->header = EEPROM_HEADER_MAGIC; |
| |
| free(eeprom_content); |
| |
| return ret; |
| } |
| |
| static bool xilinx_detect_legacy(u8 *buffer) |
| { |
| int i; |
| char c; |
| |
| for (i = 0; i < XILINX_I2C_DETECTION_BITS; i++) { |
| c = buffer[i]; |
| |
| if (c < '0' || c > '9') |
| return false; |
| } |
| |
| return true; |
| } |
| |
| static int xilinx_read_eeprom_fru(struct udevice *dev, char *name, |
| struct xilinx_board_description *desc) |
| { |
| int i, ret, eeprom_size; |
| u8 *fru_content; |
| u8 id = 0; |
| |
| /* FIXME this is shortcut - if eeprom type is wrong it will fail */ |
| eeprom_size = i2c_eeprom_size(dev); |
| |
| fru_content = calloc(1, eeprom_size); |
| if (!fru_content) |
| return -ENOMEM; |
| |
| debug("%s: I2C EEPROM read pass data at %p\n", __func__, |
| fru_content); |
| |
| ret = dm_i2c_read(dev, 0, (uchar *)fru_content, |
| eeprom_size); |
| if (ret) { |
| debug("%s: I2C EEPROM read failed\n", __func__); |
| goto end; |
| } |
| |
| fru_capture((unsigned long)fru_content); |
| if (gd->flags & GD_FLG_RELOC || (_DEBUG && IS_ENABLED(CONFIG_DTB_RESELECT))) { |
| printf("Xilinx I2C FRU format at %s:\n", name); |
| ret = fru_display(0); |
| if (ret) { |
| printf("FRU format decoding failed.\n"); |
| goto end; |
| } |
| } |
| |
| if (desc->header == EEPROM_HEADER_MAGIC) { |
| debug("Information already filled\n"); |
| ret = -EINVAL; |
| goto end; |
| } |
| |
| /* It is clear that FRU was captured and structures were filled */ |
| strlcpy(desc->manufacturer, (char *)fru_data.brd.manufacturer_name, |
| sizeof(desc->manufacturer)); |
| strlcpy(desc->uuid, (char *)fru_data.brd.uuid, |
| sizeof(desc->uuid)); |
| strlcpy(desc->name, (char *)fru_data.brd.product_name, |
| sizeof(desc->name)); |
| for (i = 0; i < sizeof(desc->name); i++) { |
| if (desc->name[i] == ' ') |
| desc->name[i] = '\0'; |
| } |
| strlcpy(desc->revision, (char *)fru_data.brd.rev, |
| sizeof(desc->revision)); |
| for (i = 0; i < sizeof(desc->revision); i++) { |
| if (desc->revision[i] == ' ') |
| desc->revision[i] = '\0'; |
| } |
| strlcpy(desc->serial, (char *)fru_data.brd.serial_number, |
| sizeof(desc->serial)); |
| |
| while (id < EEPROM_HDR_NO_OF_MAC_ADDR) { |
| if (is_valid_ethaddr((const u8 *)fru_data.mac.macid[id])) |
| memcpy(&desc->mac_addr[id], |
| (char *)fru_data.mac.macid[id], ETH_ALEN); |
| id++; |
| } |
| |
| desc->header = EEPROM_HEADER_MAGIC; |
| |
| end: |
| free(fru_content); |
| return ret; |
| } |
| |
| static bool xilinx_detect_fru(u8 *buffer) |
| { |
| u8 checksum = 0; |
| int i; |
| |
| checksum = fru_checksum((u8 *)buffer, sizeof(struct fru_common_hdr)); |
| if (checksum) { |
| debug("%s Common header CRC FAIL\n", __func__); |
| return false; |
| } |
| |
| bool all_zeros = true; |
| /* Checksum over all zeros is also zero that's why detect this case */ |
| for (i = 0; i < sizeof(struct fru_common_hdr); i++) { |
| if (buffer[i] != 0) |
| all_zeros = false; |
| } |
| |
| if (all_zeros) |
| return false; |
| |
| debug("%s Common header CRC PASS\n", __func__); |
| return true; |
| } |
| |
| static int xilinx_read_eeprom_single(char *name, |
| struct xilinx_board_description *desc) |
| { |
| int ret; |
| struct udevice *dev; |
| ofnode eeprom; |
| u8 buffer[XILINX_I2C_DETECTION_BITS]; |
| |
| eeprom = ofnode_get_aliases_node(name); |
| if (!ofnode_valid(eeprom)) |
| return -ENODEV; |
| |
| ret = uclass_get_device_by_ofnode(UCLASS_I2C_EEPROM, eeprom, &dev); |
| if (ret) |
| return ret; |
| |
| ret = dm_i2c_read(dev, 0, buffer, sizeof(buffer)); |
| if (ret) { |
| debug("%s: I2C EEPROM read failed\n", __func__); |
| return ret; |
| } |
| |
| debug("%s: i2c memory detected: %s\n", __func__, name); |
| |
| if (IS_ENABLED(CONFIG_CMD_FRU) && xilinx_detect_fru(buffer)) |
| return xilinx_read_eeprom_fru(dev, name, desc); |
| |
| if (xilinx_detect_legacy(buffer)) |
| return xilinx_read_eeprom_legacy(dev, name, desc); |
| |
| return -ENODEV; |
| } |
| |
| __maybe_unused int xilinx_read_eeprom(void) |
| { |
| int id; |
| char name_buf[8]; /* 8 bytes should be enough for nvmem+number */ |
| struct xilinx_board_description *desc; |
| |
| highest_id = dev_read_alias_highest_id("nvmem"); |
| /* No nvmem aliases present */ |
| if (highest_id < 0) |
| return -EINVAL; |
| |
| board_info = calloc(1, sizeof(*desc) * (highest_id + 1)); |
| if (!board_info) |
| return -ENOMEM; |
| |
| debug("%s: Highest ID %d, board_info %p\n", __func__, |
| highest_id, board_info); |
| |
| for (id = 0; id <= highest_id; id++) { |
| snprintf(name_buf, sizeof(name_buf), "nvmem%d", id); |
| |
| /* Alloc structure */ |
| desc = &board_info[id]; |
| |
| /* Ignoring return value for supporting multiple chips */ |
| xilinx_read_eeprom_single(name_buf, desc); |
| } |
| |
| /* |
| * Consider to clean board_info structure when board/cards are not |
| * detected. |
| */ |
| |
| return 0; |
| } |
| |
| #if defined(CONFIG_OF_BOARD) |
| void *board_fdt_blob_setup(int *err) |
| { |
| void *fdt_blob; |
| |
| *err = 0; |
| if (!IS_ENABLED(CONFIG_SPL_BUILD) && |
| !IS_ENABLED(CONFIG_VERSAL_NO_DDR) && |
| !IS_ENABLED(CONFIG_ZYNQMP_NO_DDR)) { |
| fdt_blob = (void *)CONFIG_XILINX_OF_BOARD_DTB_ADDR; |
| |
| if (fdt_magic(fdt_blob) == FDT_MAGIC) |
| return fdt_blob; |
| |
| debug("DTB is not passed via %p\n", fdt_blob); |
| } |
| |
| if (IS_ENABLED(CONFIG_SPL_BUILD)) { |
| /* |
| * FDT is at end of BSS unless it is in a different memory |
| * region |
| */ |
| if (IS_ENABLED(CONFIG_SPL_SEPARATE_BSS)) |
| fdt_blob = (ulong *)&_image_binary_end; |
| else |
| fdt_blob = (ulong *)&__bss_end; |
| } else { |
| /* FDT is at end of image */ |
| fdt_blob = (ulong *)&_end; |
| } |
| |
| if (fdt_magic(fdt_blob) == FDT_MAGIC) |
| return fdt_blob; |
| |
| debug("DTB is also not passed via %p\n", fdt_blob); |
| |
| *err = -EINVAL; |
| return NULL; |
| } |
| #endif |
| |
| #if defined(CONFIG_BOARD_LATE_INIT) |
| static int env_set_by_index(const char *name, int index, char *data) |
| { |
| char var[32]; |
| |
| if (!index) |
| sprintf(var, "board_%s", name); |
| else |
| sprintf(var, "card%d_%s", index, name); |
| |
| return env_set(var, data); |
| } |
| |
| int board_late_init_xilinx(void) |
| { |
| u32 ret = 0; |
| int i, id, macid = 0; |
| struct xilinx_board_description *desc; |
| phys_size_t bootm_size = gd->ram_top - gd->ram_base; |
| |
| if (!IS_ENABLED(CONFIG_MICROBLAZE)) { |
| ulong scriptaddr; |
| |
| scriptaddr = env_get_hex("scriptaddr", 0); |
| ret |= env_set_hex("scriptaddr", gd->ram_base + scriptaddr); |
| } |
| |
| if (IS_ENABLED(CONFIG_ARCH_ZYNQ) || IS_ENABLED(CONFIG_MICROBLAZE)) |
| bootm_size = min(bootm_size, (phys_size_t)(SZ_512M + SZ_256M)); |
| |
| ret |= env_set_hex("script_offset_f", CONFIG_BOOT_SCRIPT_OFFSET); |
| |
| ret |= env_set_addr("bootm_low", (void *)gd->ram_base); |
| ret |= env_set_addr("bootm_size", (void *)bootm_size); |
| |
| for (id = 0; id <= highest_id; id++) { |
| desc = &board_info[id]; |
| if (desc && desc->header == EEPROM_HEADER_MAGIC) { |
| if (desc->manufacturer[0]) |
| ret |= env_set_by_index("manufacturer", id, |
| desc->manufacturer); |
| if (desc->name[0]) |
| ret |= env_set_by_index("name", id, |
| desc->name); |
| if (desc->revision[0]) |
| ret |= env_set_by_index("rev", id, |
| desc->revision); |
| if (desc->serial[0]) |
| ret |= env_set_by_index("serial", id, |
| desc->serial); |
| |
| if (desc->uuid[0]) { |
| unsigned char uuid[UUID_STR_LEN + 1]; |
| unsigned char *t = desc->uuid; |
| |
| memset(uuid, 0, UUID_STR_LEN + 1); |
| |
| sprintf(uuid, "%02x%02x%02x%02x-%02x%02x-%02x%02x-%02x%02x-%02x%02x%02x%02x%02x%02x", |
| t[0], t[1], t[2], t[3], t[4], t[5], |
| t[6], t[7], t[8], t[9], t[10], t[11], |
| t[12], t[13], t[14], t[15]); |
| ret |= env_set_by_index("uuid", id, uuid); |
| } |
| |
| if (!CONFIG_IS_ENABLED(NET)) |
| continue; |
| |
| for (i = 0; i < EEPROM_HDR_NO_OF_MAC_ADDR; i++) { |
| if (is_valid_ethaddr((const u8 *)desc->mac_addr[i])) |
| ret |= eth_env_set_enetaddr_by_index("eth", |
| macid++, desc->mac_addr[i]); |
| } |
| } |
| } |
| |
| if (ret) |
| printf("%s: Saving run time variables FAILED\n", __func__); |
| |
| return 0; |
| } |
| #endif |
| |
| static char *board_name = DEVICE_TREE; |
| |
| int __maybe_unused board_fit_config_name_match(const char *name) |
| { |
| debug("%s: Check %s, default %s\n", __func__, name, board_name); |
| |
| #if !defined(CONFIG_SPL_BUILD) |
| if (IS_ENABLED(CONFIG_REGEX)) { |
| struct slre slre; |
| int ret; |
| |
| ret = slre_compile(&slre, name); |
| if (ret) { |
| ret = slre_match(&slre, board_name, strlen(board_name), |
| NULL); |
| debug("%s: name match ret = %d\n", __func__, ret); |
| return !ret; |
| } |
| } |
| #endif |
| |
| if (!strcmp(name, board_name)) |
| return 0; |
| |
| return -1; |
| } |
| |
| #if IS_ENABLED(CONFIG_DTB_RESELECT) |
| #define MAX_NAME_LENGTH 50 |
| |
| char * __maybe_unused __weak board_name_decode(void) |
| { |
| char *board_local_name; |
| struct xilinx_board_description *desc; |
| int i, id; |
| |
| board_local_name = calloc(1, MAX_NAME_LENGTH); |
| if (!board_info) |
| return NULL; |
| |
| for (id = 0; id <= highest_id; id++) { |
| desc = &board_info[id]; |
| |
| /* No board description */ |
| if (!desc) |
| goto error; |
| |
| /* Board is not detected */ |
| if (desc->header != EEPROM_HEADER_MAGIC) |
| continue; |
| |
| /* The first string should be soc name */ |
| if (!id) |
| strcat(board_local_name, CONFIG_SYS_BOARD); |
| |
| /* |
| * For two purpose here: |
| * soc_name- eg: zynqmp- |
| * and between base board and CC eg: ..revA-sck... |
| */ |
| strcat(board_local_name, "-"); |
| |
| if (desc->name[0]) { |
| /* For DT composition name needs to be lowercase */ |
| for (i = 0; i < sizeof(desc->name); i++) |
| desc->name[i] = tolower(desc->name[i]); |
| |
| strcat(board_local_name, desc->name); |
| } |
| if (desc->revision[0]) { |
| strcat(board_local_name, "-rev"); |
| |
| /* And revision needs to be uppercase */ |
| for (i = 0; i < sizeof(desc->revision); i++) |
| desc->revision[i] = toupper(desc->revision[i]); |
| |
| strcat(board_local_name, desc->revision); |
| } |
| } |
| |
| /* |
| * Longer strings will end up with buffer overflow and potential |
| * attacks that's why check it |
| */ |
| if (strlen(board_local_name) >= MAX_NAME_LENGTH) |
| panic("Board name can't be determined\n"); |
| |
| if (strlen(board_local_name)) |
| return board_local_name; |
| |
| error: |
| free(board_local_name); |
| return NULL; |
| } |
| |
| bool __maybe_unused __weak board_detection(void) |
| { |
| if (CONFIG_IS_ENABLED(DM_I2C) && CONFIG_IS_ENABLED(I2C_EEPROM)) { |
| int ret; |
| |
| ret = xilinx_read_eeprom(); |
| return !ret ? true : false; |
| } |
| |
| return false; |
| } |
| |
| bool __maybe_unused __weak soc_detection(void) |
| { |
| return false; |
| } |
| |
| char * __maybe_unused __weak soc_name_decode(void) |
| { |
| return NULL; |
| } |
| |
| int embedded_dtb_select(void) |
| { |
| if (soc_detection()) { |
| char *soc_local_name; |
| |
| soc_local_name = soc_name_decode(); |
| if (soc_local_name) { |
| board_name = soc_local_name; |
| printf("Detected SOC name: %s\n", board_name); |
| |
| /* Time to change DTB on fly */ |
| /* Both ways should work here */ |
| /* fdtdec_resetup(&rescan); */ |
| return fdtdec_setup(); |
| } |
| } |
| |
| if (board_detection()) { |
| char *board_local_name; |
| |
| board_local_name = board_name_decode(); |
| if (board_local_name) { |
| board_name = board_local_name; |
| printf("Detected name: %s\n", board_name); |
| |
| /* Time to change DTB on fly */ |
| /* Both ways should work here */ |
| /* fdtdec_resetup(&rescan); */ |
| fdtdec_setup(); |
| } |
| } |
| return 0; |
| } |
| #endif |
| |
| #if defined(CONFIG_LMB) |
| phys_size_t board_get_usable_ram_top(phys_size_t total_size) |
| { |
| phys_size_t size; |
| phys_addr_t reg; |
| struct lmb lmb; |
| |
| if (!total_size) |
| return gd->ram_top; |
| |
| if (!IS_ALIGNED((ulong)gd->fdt_blob, 0x8)) |
| panic("Not 64bit aligned DT location: %p\n", gd->fdt_blob); |
| |
| /* found enough not-reserved memory to relocated U-Boot */ |
| lmb_init(&lmb); |
| lmb_add(&lmb, gd->ram_base, gd->ram_size); |
| boot_fdt_add_mem_rsv_regions(&lmb, (void *)gd->fdt_blob); |
| size = ALIGN(CONFIG_SYS_MALLOC_LEN + total_size, MMU_SECTION_SIZE); |
| reg = lmb_alloc(&lmb, size, MMU_SECTION_SIZE); |
| |
| if (!reg) |
| reg = gd->ram_top - size; |
| |
| return reg + size; |
| } |
| #endif |