| /* |
| * TI DaVinci (TMS320DM644x) I2C driver. |
| * |
| * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> |
| * |
| * -------------------------------------------------------- |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| |
| #ifdef CONFIG_DRIVER_DAVINCI_I2C |
| |
| #include <i2c.h> |
| #include <asm/arch/hardware.h> |
| #include <asm/arch/i2c_defs.h> |
| |
| #define CHECK_NACK() \ |
| do {\ |
| if (tmp & (I2C_TIMEOUT | I2C_STAT_NACK)) {\ |
| REG(I2C_CON) = 0;\ |
| return(1);\ |
| }\ |
| } while (0) |
| |
| |
| static int wait_for_bus(void) |
| { |
| int stat, timeout; |
| |
| REG(I2C_STAT) = 0xffff; |
| |
| for (timeout = 0; timeout < 10; timeout++) { |
| if (!((stat = REG(I2C_STAT)) & I2C_STAT_BB)) { |
| REG(I2C_STAT) = 0xffff; |
| return(0); |
| } |
| |
| REG(I2C_STAT) = stat; |
| udelay(50000); |
| } |
| |
| REG(I2C_STAT) = 0xffff; |
| return(1); |
| } |
| |
| |
| static int poll_i2c_irq(int mask) |
| { |
| int stat, timeout; |
| |
| for (timeout = 0; timeout < 10; timeout++) { |
| udelay(1000); |
| stat = REG(I2C_STAT); |
| if (stat & mask) { |
| return(stat); |
| } |
| } |
| |
| REG(I2C_STAT) = 0xffff; |
| return(stat | I2C_TIMEOUT); |
| } |
| |
| |
| void flush_rx(void) |
| { |
| int dummy; |
| |
| while (1) { |
| if (!(REG(I2C_STAT) & I2C_STAT_RRDY)) |
| break; |
| |
| dummy = REG(I2C_DRR); |
| REG(I2C_STAT) = I2C_STAT_RRDY; |
| udelay(1000); |
| } |
| } |
| |
| |
| void i2c_init(int speed, int slaveadd) |
| { |
| u_int32_t div, psc; |
| |
| if (REG(I2C_CON) & I2C_CON_EN) { |
| REG(I2C_CON) = 0; |
| udelay (50000); |
| } |
| |
| psc = 2; |
| div = (CONFIG_SYS_HZ_CLOCK / ((psc + 1) * speed)) - 10; /* SCLL + SCLH */ |
| REG(I2C_PSC) = psc; /* 27MHz / (2 + 1) = 9MHz */ |
| REG(I2C_SCLL) = (div * 50) / 100; /* 50% Duty */ |
| REG(I2C_SCLH) = div - REG(I2C_SCLL); |
| |
| REG(I2C_OA) = slaveadd; |
| REG(I2C_CNT) = 0; |
| |
| /* Interrupts must be enabled or I2C module won't work */ |
| REG(I2C_IE) = I2C_IE_SCD_IE | I2C_IE_XRDY_IE | |
| I2C_IE_RRDY_IE | I2C_IE_ARDY_IE | I2C_IE_NACK_IE; |
| |
| /* Now enable I2C controller (get it out of reset) */ |
| REG(I2C_CON) = I2C_CON_EN; |
| |
| udelay(1000); |
| } |
| |
| |
| int i2c_probe(u_int8_t chip) |
| { |
| int rc = 1; |
| |
| if (chip == REG(I2C_OA)) { |
| return(rc); |
| } |
| |
| REG(I2C_CON) = 0; |
| if (wait_for_bus()) {return(1);} |
| |
| /* try to read one byte from current (or only) address */ |
| REG(I2C_CNT) = 1; |
| REG(I2C_SA) = chip; |
| REG(I2C_CON) = (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP); |
| udelay (50000); |
| |
| if (!(REG(I2C_STAT) & I2C_STAT_NACK)) { |
| rc = 0; |
| flush_rx(); |
| REG(I2C_STAT) = 0xffff; |
| } else { |
| REG(I2C_STAT) = 0xffff; |
| REG(I2C_CON) |= I2C_CON_STP; |
| udelay(20000); |
| if (wait_for_bus()) {return(1);} |
| } |
| |
| flush_rx(); |
| REG(I2C_STAT) = 0xffff; |
| REG(I2C_CNT) = 0; |
| return(rc); |
| } |
| |
| |
| int i2c_read(u_int8_t chip, u_int32_t addr, int alen, u_int8_t *buf, int len) |
| { |
| u_int32_t tmp; |
| int i; |
| |
| if ((alen < 0) || (alen > 2)) { |
| printf("%s(): bogus address length %x\n", __FUNCTION__, alen); |
| return(1); |
| } |
| |
| if (wait_for_bus()) {return(1);} |
| |
| if (alen != 0) { |
| /* Start address phase */ |
| tmp = I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX; |
| REG(I2C_CNT) = alen; |
| REG(I2C_SA) = chip; |
| REG(I2C_CON) = tmp; |
| |
| tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK); |
| |
| CHECK_NACK(); |
| |
| switch (alen) { |
| case 2: |
| /* Send address MSByte */ |
| if (tmp & I2C_STAT_XRDY) { |
| REG(I2C_DXR) = (addr >> 8) & 0xff; |
| } else { |
| REG(I2C_CON) = 0; |
| return(1); |
| } |
| |
| tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK); |
| |
| CHECK_NACK(); |
| /* No break, fall through */ |
| case 1: |
| /* Send address LSByte */ |
| if (tmp & I2C_STAT_XRDY) { |
| REG(I2C_DXR) = addr & 0xff; |
| } else { |
| REG(I2C_CON) = 0; |
| return(1); |
| } |
| |
| tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK | I2C_STAT_ARDY); |
| |
| CHECK_NACK(); |
| |
| if (!(tmp & I2C_STAT_ARDY)) { |
| REG(I2C_CON) = 0; |
| return(1); |
| } |
| } |
| } |
| |
| /* Address phase is over, now read 'len' bytes and stop */ |
| tmp = I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP; |
| REG(I2C_CNT) = len & 0xffff; |
| REG(I2C_SA) = chip; |
| REG(I2C_CON) = tmp; |
| |
| for (i = 0; i < len; i++) { |
| tmp = poll_i2c_irq(I2C_STAT_RRDY | I2C_STAT_NACK | I2C_STAT_ROVR); |
| |
| CHECK_NACK(); |
| |
| if (tmp & I2C_STAT_RRDY) { |
| buf[i] = REG(I2C_DRR); |
| } else { |
| REG(I2C_CON) = 0; |
| return(1); |
| } |
| } |
| |
| tmp = poll_i2c_irq(I2C_STAT_SCD | I2C_STAT_NACK); |
| |
| CHECK_NACK(); |
| |
| if (!(tmp & I2C_STAT_SCD)) { |
| REG(I2C_CON) = 0; |
| return(1); |
| } |
| |
| flush_rx(); |
| REG(I2C_STAT) = 0xffff; |
| REG(I2C_CNT) = 0; |
| REG(I2C_CON) = 0; |
| |
| return(0); |
| } |
| |
| |
| int i2c_write(u_int8_t chip, u_int32_t addr, int alen, u_int8_t *buf, int len) |
| { |
| u_int32_t tmp; |
| int i; |
| |
| if ((alen < 0) || (alen > 2)) { |
| printf("%s(): bogus address length %x\n", __FUNCTION__, alen); |
| return(1); |
| } |
| if (len < 0) { |
| printf("%s(): bogus length %x\n", __FUNCTION__, len); |
| return(1); |
| } |
| |
| if (wait_for_bus()) {return(1);} |
| |
| /* Start address phase */ |
| tmp = I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX | I2C_CON_STP; |
| REG(I2C_CNT) = (alen == 0) ? len & 0xffff : (len & 0xffff) + alen; |
| REG(I2C_SA) = chip; |
| REG(I2C_CON) = tmp; |
| |
| switch (alen) { |
| case 2: |
| /* Send address MSByte */ |
| tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK); |
| |
| CHECK_NACK(); |
| |
| if (tmp & I2C_STAT_XRDY) { |
| REG(I2C_DXR) = (addr >> 8) & 0xff; |
| } else { |
| REG(I2C_CON) = 0; |
| return(1); |
| } |
| /* No break, fall through */ |
| case 1: |
| /* Send address LSByte */ |
| tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK); |
| |
| CHECK_NACK(); |
| |
| if (tmp & I2C_STAT_XRDY) { |
| REG(I2C_DXR) = addr & 0xff; |
| } else { |
| REG(I2C_CON) = 0; |
| return(1); |
| } |
| } |
| |
| for (i = 0; i < len; i++) { |
| tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK); |
| |
| CHECK_NACK(); |
| |
| if (tmp & I2C_STAT_XRDY) { |
| REG(I2C_DXR) = buf[i]; |
| } else { |
| return(1); |
| } |
| } |
| |
| tmp = poll_i2c_irq(I2C_STAT_SCD | I2C_STAT_NACK); |
| |
| CHECK_NACK(); |
| |
| if (!(tmp & I2C_STAT_SCD)) { |
| REG(I2C_CON) = 0; |
| return(1); |
| } |
| |
| flush_rx(); |
| REG(I2C_STAT) = 0xffff; |
| REG(I2C_CNT) = 0; |
| REG(I2C_CON) = 0; |
| |
| return(0); |
| } |
| |
| #endif /* CONFIG_DRIVER_DAVINCI_I2C */ |