stm32f4: Add support for stm32f429-discovery board
Signed-off-by: Kamil Lulko <rev13@wp.pl>
Reviewed-by: Tom Rini <trini@konsulko.com>
diff --git a/include/configs/stm32f429-discovery.h b/include/configs/stm32f429-discovery.h
new file mode 100644
index 0000000..7f569fd
--- /dev/null
+++ b/include/configs/stm32f429-discovery.h
@@ -0,0 +1,106 @@
+/*
+ * (C) Copyright 2015
+ * Kamil Lulko, <rev13@wp.pl>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_STM32F4
+#define CONFIG_STM32F4DISCOVERY
+#define CONFIG_SYS_GENERIC_BOARD
+
+#define CONFIG_OF_LIBFDT
+
+#define CONFIG_BOARD_EARLY_INIT_F
+
+#define CONFIG_SYS_FLASH_BASE 0x08000000
+
+#define CONFIG_SYS_INIT_SP_ADDR 0x10010000
+#define CONFIG_SYS_TEXT_BASE 0x08000000
+
+#define CONFIG_SYS_ICACHE_OFF
+#define CONFIG_SYS_DCACHE_OFF
+
+/*
+ * Configuration of the external SDRAM memory
+ */
+#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_SYS_RAM_SIZE (8 << 20)
+#define CONFIG_SYS_RAM_CS 1
+#define CONFIG_SYS_RAM_FREQ_DIV 2
+#define CONFIG_SYS_RAM_BASE 0xD0000000
+#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_RAM_BASE
+#define CONFIG_SYS_LOAD_ADDR 0xD0400000
+#define CONFIG_LOADADDR 0xD0400000
+
+#define CONFIG_SYS_MAX_FLASH_SECT 12
+#define CONFIG_SYS_MAX_FLASH_BANKS 2
+
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_OFFSET (256 << 10)
+#define CONFIG_ENV_SECT_SIZE (128 << 10)
+#define CONFIG_ENV_SIZE (8 << 10)
+
+#define CONFIG_BOARD_SPECIFIC_LED
+#define CONFIG_RED_LED 110
+#define CONFIG_GREEN_LED 109
+
+#define CONFIG_STM32_GPIO
+#define CONFIG_STM32_SERIAL
+
+#define CONFIG_STM32_USART1
+
+#define CONFIG_STM32_HSE_HZ 8000000
+
+#define CONFIG_SYS_HZ_CLOCK 1000000 /* Timer is clocked at 1MHz */
+
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
+
+#define CONFIG_SYS_CBSIZE 1024
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
+ + sizeof(CONFIG_SYS_PROMPT) + 16)
+
+#define CONFIG_SYS_MAXARGS 16
+
+#define CONFIG_SYS_MALLOC_LEN (2 << 20)
+
+#define CONFIG_STACKSIZE (64 << 10)
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_BOOTARGS \
+ "console=ttystm0,115200 earlyprintk consoleblank=0 ignore_loglevel"
+#define CONFIG_BOOTCOMMAND \
+ "run bootcmd_romfs"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "bootargs_romfs=uclinux.physaddr=0x08180000 root=/dev/mtdblock0\0" \
+ "bootcmd_romfs=setenv bootargs ${bootargs} ${bootargs_romfs};" \
+ "bootm 0x08044000 - 0x08042000\0"
+
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_AUTOBOOT
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT "U-Boot > "
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_CMDLINE_EDITING
+
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_SAVEENV
+#define CONFIG_CMD_MEM
+#define CONFIG_CMD_MISC
+#define CONFIG_CMD_TIMER
+
+#endif /* __CONFIG_H */