ARM: bcm283x: don't always define CONFIG_BCM2835
Currently, CONFIG_BCM2835 is defined for all BCM283x builds and _BCM2836
is defined when building for that SoC. That means there isn't a single
define that means "exactly BCM2835". This will complicate future patches
where BCM2835-vs-anything-else needs to be determined simply.
Modify the code to define one or the other of CONFIG_BCM2835/BCM2836 so
future patches are simpler.
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
diff --git a/arch/arm/mach-bcm283x/include/mach/gpio.h b/arch/arm/mach-bcm283x/include/mach/gpio.h
index c8ef8f5..e6e5d16 100644
--- a/arch/arm/mach-bcm283x/include/mach/gpio.h
+++ b/arch/arm/mach-bcm283x/include/mach/gpio.h
@@ -9,7 +9,7 @@
#ifndef _BCM2835_GPIO_H_
#define _BCM2835_GPIO_H_
-#ifdef CONFIG_BCM2836
+#ifndef CONFIG_BCM2835
#define BCM2835_GPIO_BASE 0x3f200000
#else
#define BCM2835_GPIO_BASE 0x20200000
diff --git a/arch/arm/mach-bcm283x/include/mach/mbox.h b/arch/arm/mach-bcm283x/include/mach/mbox.h
index 4a14391..627acb8 100644
--- a/arch/arm/mach-bcm283x/include/mach/mbox.h
+++ b/arch/arm/mach-bcm283x/include/mach/mbox.h
@@ -38,7 +38,7 @@
/* Raw mailbox HW */
-#ifdef CONFIG_BCM2836
+#ifndef CONFIG_BCM2835
#define BCM2835_MBOX_PHYSADDR 0x3f00b880
#else
#define BCM2835_MBOX_PHYSADDR 0x2000b880
diff --git a/arch/arm/mach-bcm283x/include/mach/sdhci.h b/arch/arm/mach-bcm283x/include/mach/sdhci.h
index 2a21ccb..64e582c 100644
--- a/arch/arm/mach-bcm283x/include/mach/sdhci.h
+++ b/arch/arm/mach-bcm283x/include/mach/sdhci.h
@@ -7,7 +7,7 @@
#ifndef _BCM2835_SDHCI_H_
#define _BCM2835_SDHCI_H_
-#ifdef CONFIG_BCM2836
+#ifndef CONFIG_BCM2835
#define BCM2835_SDHCI_BASE 0x3f300000
#else
#define BCM2835_SDHCI_BASE 0x20300000
diff --git a/arch/arm/mach-bcm283x/include/mach/timer.h b/arch/arm/mach-bcm283x/include/mach/timer.h
index 004c24b..2a85f23 100644
--- a/arch/arm/mach-bcm283x/include/mach/timer.h
+++ b/arch/arm/mach-bcm283x/include/mach/timer.h
@@ -7,7 +7,7 @@
#ifndef _BCM2835_TIMER_H
#define _BCM2835_TIMER_H
-#ifdef CONFIG_BCM2836
+#ifndef CONFIG_BCM2835
#define BCM2835_TIMER_PHYSADDR 0x3f003000
#else
#define BCM2835_TIMER_PHYSADDR 0x20003000
diff --git a/arch/arm/mach-bcm283x/include/mach/wdog.h b/arch/arm/mach-bcm283x/include/mach/wdog.h
index cbc350e..7741d7b 100644
--- a/arch/arm/mach-bcm283x/include/mach/wdog.h
+++ b/arch/arm/mach-bcm283x/include/mach/wdog.h
@@ -7,7 +7,7 @@
#ifndef _BCM2835_WDOG_H
#define _BCM2835_WDOG_H
-#ifdef CONFIG_BCM2836
+#ifndef CONFIG_BCM2835
#define BCM2835_WDOG_PHYSADDR 0x3f100000
#else
#define BCM2835_WDOG_PHYSADDR 0x20100000
diff --git a/arch/arm/mach-bcm283x/phys2bus.c b/arch/arm/mach-bcm283x/phys2bus.c
index fc1c299..8e9f492 100644
--- a/arch/arm/mach-bcm283x/phys2bus.c
+++ b/arch/arm/mach-bcm283x/phys2bus.c
@@ -9,7 +9,7 @@
unsigned long phys_to_bus(unsigned long phys)
{
-#ifdef CONFIG_BCM2836
+#ifndef CONFIG_BCM2835
return 0xc0000000 | phys;
#else
return 0x40000000 | phys;
diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c
index da4b6ff..1fd7591 100644
--- a/board/raspberrypi/rpi/rpi.c
+++ b/board/raspberrypi/rpi/rpi.c
@@ -31,7 +31,7 @@
};
static const struct pl01x_serial_platdata serial_platdata = {
-#ifdef CONFIG_BCM2836
+#ifndef CONFIG_BCM2835
.base = 0x3f201000,
#else
.base = 0x20201000,
diff --git a/include/configs/rpi-common.h b/include/configs/rpi-common.h
index 7250e37..89aee0a 100644
--- a/include/configs/rpi-common.h
+++ b/include/configs/rpi-common.h
@@ -11,7 +11,6 @@
#include <asm/arch/timer.h>
/* Architecture, CPU, etc.*/
-#define CONFIG_BCM2835
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_SYS_TIMER_RATE 1000000
@@ -26,7 +25,7 @@
* chose to use someone else's previously registered machine ID (3139, MX51_GGC)
* rather than obtaining a valid ID:-/
*/
-#ifndef CONFIG_BCM2836
+#ifdef CONFIG_BCM2835
#define CONFIG_MACH_TYPE MACH_TYPE_BCM2708
#endif
@@ -80,7 +79,7 @@
#define CONFIG_CMD_USB
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_DWC2
-#ifdef CONFIG_BCM2836
+#ifndef CONFIG_BCM2835
#define CONFIG_USB_DWC2_REG_ADDR 0x3f980000
#else
#define CONFIG_USB_DWC2_REG_ADDR 0x20980000
diff --git a/include/configs/rpi.h b/include/configs/rpi.h
index 86422e3..a788ce4 100644
--- a/include/configs/rpi.h
+++ b/include/configs/rpi.h
@@ -7,6 +7,7 @@
#ifndef __CONFIG_H
#define __CONFIG_H
+#define CONFIG_BCM2835
#define CONFIG_SYS_CACHELINE_SIZE 32
#include "rpi-common.h"