Clean up the code according to codestyle:
(1) remove some C++ comments.
(2) remove trailing white space.
(3) remove trailing empty line.
(4) Indentation by table.
(5) remove {} in one line condition.
(6) add space before '(' in function call.
Remove some weird printf () output.
Add necessary comments.
Modified Makefile to support building in a separate directory.
diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h
index 24cc86b..b13b699 100644
--- a/include/configs/mpc7448hpc2.h
+++ b/include/configs/mpc7448hpc2.h
@@ -24,12 +24,11 @@
* MA 02111-1307 USA
*/
-/****************************************************************
- *
+/*
* board specific configuration options for Freescale
* MPC7448HPC2 (High-Performance Computing II) (Taiga) board
*
- ****************************************************************/
+ */
#ifndef __CONFIG_H
#define __CONFIG_H
@@ -45,11 +44,11 @@
#define CONFIG_750FX /* this option to enable init of extended BATs */
#define CONFIG_ALTIVEC /* undef to disable */
-#define CFG_BOARD_NAME "MPC7448 HPC II"
-#define CONFIG_IDENT_STRING " Freescale MPC7448 HPC II"
+#define CFG_BOARD_NAME "MPC7448 HPC II"
+#define CONFIG_IDENT_STRING " Freescale MPC7448 HPC II"
-#define CFG_OCN_CLK 133000000 /* 133 MHz */
-#define CFG_CONFIG_BUS_CLK 133000000
+#define CFG_OCN_CLK 133000000 /* 133 MHz */
+#define CFG_CONFIG_BUS_CLK 133000000
#define CFG_CLK_SPREAD /* Enable Spread-Spectrum Clock generation */
@@ -63,10 +62,10 @@
/* Default MAC Addresses for on-chip GIGE Controller */
-#define CONFIG_ETHADDR 00:06:D2:00:00:01
+#define CONFIG_ETHADDR 00:06:D2:00:00:01
#define CONFIG_HAS_ETH1
-#define CONFIG_ETH1ADDR 00:06:D2:00:00:02
+#define CONFIG_ETH1ADDR 00:06:D2:00:00:02
#define CONFIG_ENV_OVERWRITE
@@ -75,12 +74,12 @@
* (easy to change)
*/
-#define CONFIG_BAUDRATE 115200 /* console baudrate = 115000 */
+#define CONFIG_BAUDRATE 115200 /* console baudrate = 115000 */
/*#define CFG_HUSH_PARSER */
#undef CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2 "> "
+#define CFG_PROMPT_HUSH_PS2 "> "
/* Pass open firmware flat tree */
#define CONFIG_OF_FLAT_TREE 1
@@ -99,29 +98,30 @@
* for your console driver.
*
* what to do:
- * If you have hacked a serial cable onto the second DUART channel, change the CFG_DUART port from 1
- * to 0 below.
+ * If you have hacked a serial cable onto the second DUART channel,
+ * change the CFG_DUART port from 1 to 0 below.
*
*/
-#define CONFIG_CONS_INDEX 1
+#define CONFIG_CONS_INDEX 1
#define CFG_NS16550
#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE 1
+#define CFG_NS16550_REG_SIZE 1
#define CFG_NS16550_CLK CFG_OCN_CLK * 8
-#define CFG_NS16550_COM1 (CFG_TSI108_CSR_RST_BASE+0x7808)
-#define CFG_NS16550_COM2 (CFG_TSI108_CSR_RST_BASE+0x7C08)
+#define CFG_NS16550_COM1 (CFG_TSI108_CSR_RST_BASE+0x7808)
+#define CFG_NS16550_COM2 (CFG_TSI108_CSR_RST_BASE+0x7C08)
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
+#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
#define CONFIG_ZERO_BOOTDELAY_CHECK
#undef CONFIG_BOOTARGS
-/*#define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo" */
+/* #define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\"
+ * to mount root filesystem over NFS;echo" */
#if (CONFIG_BOOTDELAY >= 0)
-#define CONFIG_BOOTCOMMAND "tftpboot 0x400000 zImage.initrd.elf;\
+#define CONFIG_BOOTCOMMAND "tftpboot 0x400000 zImage.initrd.elf;\
setenv bootargs $(bootargs) $(bootargs_root) nfsroot=$(serverip):$(rootpath) \
ip=$(ipaddr):$(serverip)$(bootargs_end); bootm 0x400000; "
@@ -130,34 +130,34 @@
#undef CONFIG_EXTRA_ENV_SETTINGS
-#define CONFIG_SERIAL "No. 1"
+#define CONFIG_SERIAL "No. 1"
/* Networking Configuration */
-#define KSEG1ADDR(a) (a) /* Needed by the rtl8139 driver */
+#define KSEG1ADDR(a) (a) /* Needed by the rtl8139 driver */
#define CONFIG_TSI108_ETH
-#define CONFIG_TSI108_ETH_NUM_PORTS 2
+#define CONFIG_TSI108_ETH_NUM_PORTS 2
#define CONFIG_NET_MULTI
-#define CONFIG_IPADDR 172.27.234.48
-#define CONFIG_SERVERIP 172.27.234.10
-#define CONFIG_NETMASK 255.255.0.0
-#define CONFIG_GATEWAYIP 172.27.255.254
+#define CONFIG_IPADDR 172.27.234.48
+#define CONFIG_SERVERIP 172.27.234.10
+#define CONFIG_NETMASK 255.255.0.0
+#define CONFIG_GATEWAYIP 172.27.255.254
-#define CONFIG_BOOTFILE zImage.initrd.elf
-#define CONFIG_LOADADDR 0x400000
+#define CONFIG_BOOTFILE zImage.initrd.elf
+#define CONFIG_LOADADDR 0x400000
/*-------------------------------------------------------------------------- */
-#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
+#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
#define CFG_LOADS_BAUD_CHANGE /* allow baudrate changes */
#undef CONFIG_WATCHDOG /* watchdog disabled */
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \
- CONFIG_BOOTP_BOOTFILESIZE)
+#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \
+ CONFIG_BOOTP_BOOTFILESIZE)
#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
| CFG_CMD_ASKENV \
@@ -178,59 +178,59 @@
/*set date in u-boot*/
#define CONFIG_RTC_M48T35A
-#define CFG_NVRAM_BASE_ADDR 0xfc000000
-#define CFG_NVRAM_SIZE 0x8000
+#define CFG_NVRAM_BASE_ADDR 0xfc000000
+#define CFG_NVRAM_SIZE 0x8000
/*
* Miscellaneous configurable options
*/
-#define CONFIG_VERSION_VARIABLE 1
+#define CONFIG_VERSION_VARIABLE 1
#define CONFIG_TSI108_I2C
-#define CFG_I2C_EEPROM_ADDR 0x50 /* I2C EEPROM page 1 */
-#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
+#define CFG_I2C_EEPROM_ADDR 0x50 /* I2C EEPROM page 1 */
+#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
-#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */
#else
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)/* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
/*
#define CFG_DRAM_TEST
- * DRAM tests
- * CFG_DRAM_TEST - enables the following tests.
+ * DRAM tests
+ * CFG_DRAM_TEST - enables the following tests.
*
- * CFG_DRAM_TEST_DATA - Enables test for shorted or open data lines
- * Environment variable 'test_dram_data' must be
- * set to 'y'.
- * CFG_DRAM_TEST_ADDRESS - Enables test to verify that each word is uniquely
- * addressable. Environment variable
- * 'test_dram_address' must be set to 'y'.
- * CFG_DRAM_TEST_WALK - Enables test a 64-bit walking ones pattern test.
- * This test takes about 6 minutes to test 64 MB.
- * Environment variable 'test_dram_walk' must be
- * set to 'y'.
+ * CFG_DRAM_TEST_DATA - Enables test for shorted or open data lines
+ * Environment variable 'test_dram_data' must be
+ * set to 'y'.
+ * CFG_DRAM_TEST_ADDRESS - Enables test to verify that each word
+ * is uniquely addressable. Environment variable
+ * 'test_dram_address' must be set to 'y'.
+ * CFG_DRAM_TEST_WALK - Enables test a 64-bit walking ones pattern test.
+ * This test takes about 6 minutes to test 64 MB.
+ * Environment variable 'test_dram_walk' must be
+ * set to 'y'.
*/
#undef CFG_DRAM_TEST
-#define CFG_MEMTEST_START 0x00400000 /* memtest works on */
-#define CFG_MEMTEST_END 0x07c00000 /* 4 ... 124 MB in DRAM */
+#define CFG_MEMTEST_START 0x00400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x07c00000 /* 4 ... 124 MB in DRAM */
#if defined(CFG_DRAM_TEST)
#define CFG_DRAM_TEST_DATA
#define CFG_DRAM_TEST_ADDRESS
#define CFG_DRAM_TEST_WALK
-#endif /* CFG_DRAM_TEST */
+#endif /* CFG_DRAM_TEST */
-#define CFG_LOAD_ADDR 0x00400000 /* default load address */
+#define CFG_LOAD_ADDR 0x00400000 /* default load address */
-#define CFG_HZ 1000 /* decr freq: 1ms ticks */
+#define CFG_HZ 1000 /* decr freq: 1ms ticks */
/*
* Low Level Configuration Settings
@@ -246,12 +246,12 @@
* When locking data in cache you should point the CFG_INIT_RAM_ADDRESS
* To an unused memory region. The stack will remain in cache until RAM
* is initialized
-*/
+ */
#undef CFG_INIT_RAM_LOCK
-#define CFG_INIT_RAM_ADDR 0x07d00000 /* unused memory region */
-#define CFG_INIT_RAM_END 0x4000 /* larger space - we have SDRAM initialized */
+#define CFG_INIT_RAM_ADDR 0x07d00000 /* unused memory region */
+#define CFG_INIT_RAM_END 0x4000/* larger space - we have SDRAM initialized */
-#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for init data */
+#define CFG_GBL_DATA_SIZE 128/* size in bytes reserved for init data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
/*-----------------------------------------------------------------------
@@ -260,54 +260,54 @@
* Please note that CFG_SDRAM_BASE _must_ start at 0
*/
-#define CFG_SDRAM_BASE 0x00000000 /* first 256 MB of SDRAM */
-#define CFG_SDRAM1_BASE 0x10000000 /* next 256MB of SDRAM */
+#define CFG_SDRAM_BASE 0x00000000 /* first 256 MB of SDRAM */
+#define CFG_SDRAM1_BASE 0x10000000 /* next 256MB of SDRAM */
-#define CFG_SDRAM2_BASE 0x40000000 /* beginning of non-cacheable alias for SDRAM - first 256MB */
-#define CFG_SDRAM3_BASE 0x50000000 /* next Non-Cacheable 256MB of SDRAM */
+#define CFG_SDRAM2_BASE 0x40000000 /* beginning of non-cacheable alias for SDRAM - first 256MB */
+#define CFG_SDRAM3_BASE 0x50000000 /* next Non-Cacheable 256MB of SDRAM */
-#define CFG_PCI_PFM_BASE 0x80000000 /* Prefetchable (cacheable) PCI/X PFM and SDRAM OCN (128MB+128MB) */
+#define CFG_PCI_PFM_BASE 0x80000000 /* Prefetchable (cacheable) PCI/X PFM and SDRAM OCN (128MB+128MB) */
-#define CFG_PCI_MEM32_BASE 0xE0000000 /* Non-Cacheable PCI/X MEM and SDRAM OCN (128MB+128MB) */
+#define CFG_PCI_MEM32_BASE 0xE0000000 /* Non-Cacheable PCI/X MEM and SDRAM OCN (128MB+128MB) */
-#define CFG_MISC_REGION_BASE 0xf0000000 /* Base Address for (PCI/X + Flash) region */
+#define CFG_MISC_REGION_BASE 0xf0000000 /* Base Address for (PCI/X + Flash) region */
-#define CFG_FLASH_BASE 0xff000000 /* Base Address of Flash device */
-#define CFG_FLASH_BASE2 0xfe000000 /* Alternate Flash Base Address */
+#define CFG_FLASH_BASE 0xff000000 /* Base Address of Flash device */
+#define CFG_FLASH_BASE2 0xfe000000 /* Alternate Flash Base Address */
#define CONFIG_VERY_BIG_RAM /* we will use up to 256M memory for cause we are short of BATS */
-#define PCI0_IO_BASE_BOOTM 0xfd000000
+#define PCI0_IO_BASE_BOOTM 0xfd000000
-#define CFG_RESET_ADDRESS 0x3fffff00
-#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CFG_MONITOR_BASE TEXT_BASE /* u-boot code base */
-#define CFG_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc */
+#define CFG_RESET_ADDRESS 0x3fffff00
+#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+#define CFG_MONITOR_BASE TEXT_BASE /* u-boot code base */
+#define CFG_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc */
/* Peripheral Device section */
-/*******************************************************
+/*
* Resources on the Tsi108
- *******************************************************/
+ */
-#define CFG_TSI108_CSR_RST_BASE 0xC0000000 /* Tsi108 CSR base after reset */
-#define CFG_TSI108_CSR_BASE CFG_TSI108_CSR_RST_BASE /* Runtime Tsi108 CSR base */
+#define CFG_TSI108_CSR_RST_BASE 0xC0000000 /* Tsi108 CSR base after reset */
+#define CFG_TSI108_CSR_BASE CFG_TSI108_CSR_RST_BASE /* Runtime Tsi108 CSR base */
#define ENABLE_PCI_CSR_BAR /* enables access to Tsi108 CSRs from the PCI/X bus */
#undef DISABLE_PBM
-/*-----------------------------------------------------------------------
+/*
* PCI stuff
- *-----------------------------------------------------------------------
+ *
*/
#define CONFIG_PCI /* include pci support */
#define CONFIG_TSI108_PCI /* include tsi108 pci support */
-#define PCI_HOST_ADAPTER 0 /* configure as pci adapter */
-#define PCI_HOST_FORCE 1 /* configure as pci host */
-#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
+#define PCI_HOST_ADAPTER 0 /* configure as pci adapter */
+#define PCI_HOST_FORCE 1 /* configure as pci host */
+#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
#define CONFIG_PCI_PNP /* do pci plug-and-play */
@@ -315,20 +315,20 @@
/* PCI MEMORY MAP section */
/* PCI view of System Memory */
-#define CFG_PCI_MEMORY_BUS 0x00000000
-#define CFG_PCI_MEMORY_PHYS 0x00000000
-#define CFG_PCI_MEMORY_SIZE 0x80000000
+#define CFG_PCI_MEMORY_BUS 0x00000000
+#define CFG_PCI_MEMORY_PHYS 0x00000000
+#define CFG_PCI_MEMORY_SIZE 0x80000000
/* PCI Memory Space */
-#define CFG_PCI_MEM_BUS (CFG_PCI_MEM_PHYS)
-#define CFG_PCI_MEM_PHYS (CFG_PCI_MEM32_BASE) //CFG_PCI_MEM32_BASE = 0xE0000000
-#define CFG_PCI_MEM_SIZE 0x10000000 /* 256 MB space for PCI/X Mem + SDRAM OCN */
+#define CFG_PCI_MEM_BUS (CFG_PCI_MEM_PHYS)
+#define CFG_PCI_MEM_PHYS (CFG_PCI_MEM32_BASE) /* 0xE0000000 */
+#define CFG_PCI_MEM_SIZE 0x10000000 /* 256 MB space for PCI/X Mem + SDRAM OCN */
/* PCI I/O Space */
-#define CFG_PCI_IO_BUS 0x00000000
-#define CFG_PCI_IO_PHYS 0xfa000000 /* Changed from fd000000 */
+#define CFG_PCI_IO_BUS 0x00000000
+#define CFG_PCI_IO_PHYS 0xfa000000 /* Changed from fd000000 */
-#define CFG_PCI_IO_SIZE 0x01000000 /* 16MB */
+#define CFG_PCI_IO_SIZE 0x01000000 /* 16MB */
#define _IO_BASE 0x00000000 /* points to PCI I/O space */
@@ -336,91 +336,91 @@
#define CFG_PCI_CFG_BASE 0xfb000000 /* Changed from FE000000 */
#define CFG_PCI_CFG_SIZE 0x01000000 /* 16MB */
-#define CFG_IBAT0U 0xFE0003FF
-#define CFG_IBAT0L 0xFE000002
+#define CFG_IBAT0U 0xFE0003FF
+#define CFG_IBAT0L 0xFE000002
-#define CFG_IBAT1U 0x00007FFF
-#define CFG_IBAT1L 0x00000012
+#define CFG_IBAT1U 0x00007FFF
+#define CFG_IBAT1L 0x00000012
-#define CFG_IBAT2U 0x80007FFF
-#define CFG_IBAT2L 0x80000022
+#define CFG_IBAT2U 0x80007FFF
+#define CFG_IBAT2L 0x80000022
-#define CFG_IBAT3U 0x00000000
-#define CFG_IBAT3L 0x00000000
+#define CFG_IBAT3U 0x00000000
+#define CFG_IBAT3L 0x00000000
-#define CFG_IBAT4U 0x00000000
-#define CFG_IBAT4L 0x00000000
+#define CFG_IBAT4U 0x00000000
+#define CFG_IBAT4L 0x00000000
-#define CFG_IBAT5U 0x00000000
-#define CFG_IBAT5L 0x00000000
+#define CFG_IBAT5U 0x00000000
+#define CFG_IBAT5L 0x00000000
-#define CFG_IBAT6U 0x00000000
-#define CFG_IBAT6L 0x00000000
+#define CFG_IBAT6U 0x00000000
+#define CFG_IBAT6L 0x00000000
-#define CFG_IBAT7U 0x00000000
-#define CFG_IBAT7L 0x00000000
+#define CFG_IBAT7U 0x00000000
+#define CFG_IBAT7L 0x00000000
-#define CFG_DBAT0U 0xE0003FFF
-#define CFG_DBAT0L 0xE000002A
+#define CFG_DBAT0U 0xE0003FFF
+#define CFG_DBAT0L 0xE000002A
-#define CFG_DBAT1U 0x00007FFF
-#define CFG_DBAT1L 0x00000012
+#define CFG_DBAT1U 0x00007FFF
+#define CFG_DBAT1L 0x00000012
-#define CFG_DBAT2U 0x00000000
-#define CFG_DBAT2L 0x00000000
+#define CFG_DBAT2U 0x00000000
+#define CFG_DBAT2L 0x00000000
-#define CFG_DBAT3U 0xC0000003
-#define CFG_DBAT3L 0xC000002A
+#define CFG_DBAT3U 0xC0000003
+#define CFG_DBAT3L 0xC000002A
-#define CFG_DBAT4U 0x00000000
-#define CFG_DBAT4L 0x00000000
+#define CFG_DBAT4U 0x00000000
+#define CFG_DBAT4L 0x00000000
-#define CFG_DBAT5U 0x00000000
-#define CFG_DBAT5L 0x00000000
+#define CFG_DBAT5U 0x00000000
+#define CFG_DBAT5L 0x00000000
-#define CFG_DBAT6U 0x00000000
-#define CFG_DBAT6L 0x00000000
+#define CFG_DBAT6U 0x00000000
+#define CFG_DBAT6L 0x00000000
-#define CFG_DBAT7U 0x00000000
-#define CFG_DBAT7L 0x00000000
+#define CFG_DBAT7U 0x00000000
+#define CFG_DBAT7L 0x00000000
/* I2C addresses for the two DIMM SPD chips */
-#define DIMM0_I2C_ADDR 0x51
-#define DIMM1_I2C_ADDR 0x52
+#define DIMM0_I2C_ADDR 0x51
+#define DIMM1_I2C_ADDR 0x52
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
-#define CFG_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */
+#define CFG_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */
/*-----------------------------------------------------------------------
* FLASH organization
*/
-#define CFG_MAX_FLASH_BANKS 1 /* Flash can be at one of two addresses */
-#define FLASH_BANK_SIZE 0x01000000 /* 16 MB Total */
+#define CFG_MAX_FLASH_BANKS 1/* Flash can be at one of two addresses */
+#define FLASH_BANK_SIZE 0x01000000 /* 16 MB Total */
#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE, CFG_FLASH_BASE2}
#define CFG_FLASH_CFI_DRIVER
#define CFG_FLASH_CFI
#define CFG_FLASH_CFI_SWAP
-#define PHYS_FLASH_SIZE 0x01000000
-#define CFG_MAX_FLASH_SECT (128)
+#define PHYS_FLASH_SIZE 0x01000000
+#define CFG_MAX_FLASH_SECT (128)
#define CFG_ENV_IS_IN_NVRAM
-#define CFG_ENV_ADDR 0xFC000000
+#define CFG_ENV_ADDR 0xFC000000
-#define CFG_ENV_OFFSET 0x00000000 /* Offset of Environment Sector */
-#define CFG_ENV_SIZE 0x00000400 /* Total Size of Environment Space */
+#define CFG_ENV_OFFSET 0x00000000 /* Offset of Environment Sector */
+#define CFG_ENV_SIZE 0x00000400 /* Total Size of Environment Space */
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */
+#define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
/*-----------------------------------------------------------------------
@@ -429,16 +429,16 @@
*/
#undef CFG_L2
-#define L2_INIT 0
-#define L2_ENABLE (L2_INIT | L2CR_L2E)
+#define L2_INIT 0
+#define L2_ENABLE (L2_INIT | L2CR_L2E)
/*
* Internal Definitions
*
* Boot Flags
*/
-#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
#define CFG_EXCEPTION_AFTER_RELOCATE
#define CFG_SERIAL_HANG_IN_EXCEPTION
-#endif /* __CONFIG_H */
+#endif /* __CONFIG_H */