* Add start-up delay to make sure power has stabilized before
attempting to switch on USB on SX1 board.
* Patch by Josef Wagner, 18 Mar 2004:
- Add support for MicroSys XM250 board (PXA255)
- Add support for MicroSys PM828 board (MPC8280)
- Add support for 32 MB Flash on PM825/826
- new SDRAM refresh rate for PM825/PM826
- added support for MicroSys PM520 (MPC5200)
- replaced Query by Identify command in CPU86/flash.c
to support 28F160F3B
* Fix wrap around problem with udelay() on ARM920T
* Add support for Macronix flash on TRAB board
diff --git a/board/pm520/pm520.c b/board/pm520/pm520.c
new file mode 100644
index 0000000..bb0268f
--- /dev/null
+++ b/board/pm520/pm520.c
@@ -0,0 +1,193 @@
+/*
+ * (C) Copyright 2003-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc5xxx.h>
+#include <pci.h>
+
+#ifndef CFG_RAMBOOT
+static long int dram_size(long int *base, long int maxsize)
+{
+ volatile long int *addr;
+ ulong cnt, val;
+ ulong save[32]; /* to make test non-destructive */
+ unsigned char i = 0;
+
+ for (cnt = (maxsize / sizeof (long)) >> 1; cnt > 0; cnt >>= 1) {
+ addr = base + cnt; /* pointer arith! */
+
+ save[i++] = *addr;
+ *addr = ~cnt;
+ }
+
+ /* write 0 to base address */
+ addr = base;
+ save[i] = *addr;
+ *addr = 0;
+
+ /* check at base address */
+ if ((val = *addr) != 0) {
+ *addr = save[i];
+ return (0);
+ }
+
+ for (cnt = 1; cnt < maxsize / sizeof (long); cnt <<= 1) {
+ addr = base + cnt; /* pointer arith! */
+
+ val = *addr;
+ *addr = save[--i];
+
+ if (val != (~cnt)) {
+ return (cnt * sizeof (long));
+ }
+ }
+ return (maxsize);
+}
+
+static void sdram_start (int hi_addr)
+{
+ long hi_addr_bit = hi_addr ? 0x01000000 : 0;
+
+ /* unlock mode register */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = 0xd04f0000 | hi_addr_bit;
+ /* precharge all banks */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = 0xd04f0002 | hi_addr_bit;
+ /* set mode register */
+#if defined(CONFIG_MPC5200)
+ *(vu_long *)MPC5XXX_SDRAM_MODE = 0x408d0000;
+#elif defined(CONFIG_MGT5100)
+ *(vu_long *)MPC5XXX_SDRAM_MODE = 0x008d0000;
+#endif
+ /* precharge all banks */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = 0xd04f0002 | hi_addr_bit;
+ /* auto refresh */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = 0xd04f0004 | hi_addr_bit;
+ /* set mode register */
+ *(vu_long *)MPC5XXX_SDRAM_MODE = 0x008d0000;
+ /* normal operation */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = 0x504f0000 | hi_addr_bit;
+}
+#endif
+
+long int initdram (int board_type)
+{
+ ulong dramsize = 0;
+#ifndef CFG_RAMBOOT
+ ulong test1, test2;
+
+ /* configure SDRAM start/end */
+#if defined(CONFIG_MPC5200)
+ *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e;/* 2G at 0x0 */
+ *(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x80000000;/* disabled */
+
+ /* setup config registers */
+ *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = 0xc2233a00;
+ *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = 0x88b70004;
+
+#elif defined(CONFIG_MGT5100)
+ *(vu_long *)MPC5XXX_SDRAM_START = 0x00000000;
+ *(vu_long *)MPC5XXX_SDRAM_STOP = 0x0000ffff;/* 2G */
+ *(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */
+
+ /* setup config registers */
+ *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = 0xc2222600;
+ *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = 0x88b70004;
+
+ /* address select register */
+ *(vu_long *)MPC5XXX_SDRAM_XLBSEL = 0x03000000;
+#endif
+ sdram_start(0);
+ test1 = dram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
+ sdram_start(1);
+ test2 = dram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
+ if (test1 > test2) {
+ sdram_start(0);
+ dramsize = test1;
+ } else {
+ dramsize = test2;
+ }
+#if defined(CONFIG_MPC5200)
+ *(vu_long *)MPC5XXX_SDRAM_CS0CFG =
+ (0x13 + __builtin_ffs(dramsize >> 20) - 1);
+ *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
+#elif defined(CONFIG_MGT5100)
+ *(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15);
+#endif
+
+#else
+#ifdef CONFIG_MGT5100
+ *(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */
+ dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15);
+#else
+ dramsize = ((1 << (*(vu_long *)MPC5XXX_SDRAM_CS0CFG - 0x13)) << 20);
+#endif
+#endif /* CFG_RAMBOOT */
+ /* return total ram size */
+ return dramsize;
+}
+
+int checkboard (void)
+{
+#if defined(CONFIG_MPC5200)
+ puts ("Board: MicroSys PM520 \n");
+#elif defined(CONFIG_MGT5100)
+ puts ("Board: MicroSys PM510 \n");
+#endif
+ return 0;
+}
+
+void flash_preinit(void)
+{
+ /*
+ * Now, when we are in RAM, enable flash write
+ * access for detection process.
+ * Note that CS_BOOT cannot be cleared when
+ * executing in flash.
+ */
+#if defined(CONFIG_MGT5100)
+ *(vu_long *)MPC5XXX_ADDECR &= ~(1 << 25); /* disable CS_BOOT */
+ *(vu_long *)MPC5XXX_ADDECR |= (1 << 16); /* enable CS0 */
+#endif
+ *(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
+}
+
+void flash_afterinit(ulong size)
+{
+ if (size == 0x800000) { /* adjust mapping */
+ *(vu_long *)MPC5XXX_BOOTCS_START = *(vu_long *)MPC5XXX_CS0_START =
+ START_REG(CFG_BOOTCS_START | size);
+ *(vu_long *)MPC5XXX_BOOTCS_STOP = *(vu_long *)MPC5XXX_CS0_STOP =
+ STOP_REG(CFG_BOOTCS_START | size, size);
+ }
+}
+
+#ifdef CONFIG_PCI
+static struct pci_controller hose;
+
+extern void pci_mpc5xxx_init(struct pci_controller *);
+
+void pci_init_board(void)
+{
+ pci_mpc5xxx_init(&hose);
+}
+#endif