Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
diff --git a/.gitignore b/.gitignore
index c79d577..771b860 100644
--- a/.gitignore
+++ b/.gitignore
@@ -80,5 +80,11 @@
/ctags
/etags
+# gnu global files
+GPATH
+GRTAGS
+GSYMS
+GTAGS
+
# spl ais files
/spl/*.ais
diff --git a/CREDITS b/CREDITS
index 7c1458f..3b657e9 100644
--- a/CREDITS
+++ b/CREDITS
@@ -124,6 +124,10 @@
E: jfd@GigabitNetworks.COM
D: Port to the MOUSSE board
+N: Mike Dunn
+E: mikedunn@newsguy.com
+D: Palmtreo680 board, docg4 nand flash driver
+
N: Dave Ellis
E: DGE@sixnetio.com
D: EEPROM Speedup, SXNI855T port
diff --git a/MAINTAINERS b/MAINTAINERS
index 001b42d..3e70b03 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -651,6 +651,9 @@
imx27lite i.MX27
qong i.MX31
+Mike Dunn <mikedunn@newsguy.com>
+ palmtreo680 pxa270
+
Kristoffer Ericson <kristoffer.ericson@gmail.com>
jornada SA1110
@@ -850,6 +853,10 @@
omap4_sdp4430 ARM ARMV7 (OMAP4xx SoC)
omap5_evm ARM ARMV7 (OMAP5xx Soc)
+Suriyan Ramasami <suriyan.r@gmail.com>
+
+ goflexhome ARM926EJS (Kirkwood SoC)
+
Thierry Reding <thierry.reding@avionic-design.de>
plutux Tegra20 (ARM7 & A9 Dual Core)
@@ -922,6 +929,7 @@
Bo Shen <voice.shen@atmel.com>
at91sam9x5ek ARM926EJS (AT91SAM9G15,G25,G35,X25,X35 SoC)
+ sama5d3xek ARMV7 (SAMA5D31, D33, D34, D35 SoC)
Rajeshwari Shinde <rajeshwari.s@samsung.com>
@@ -968,9 +976,14 @@
SFFSDR ARM926EJS
+Lokesh Vutla <lokeshvutla@ti.com>
+
+ dra7xx_evm ARM ARMV7 (DRA7xx Soc)
+
Matt Waddel <matt.waddel@linaro.org>
- ca9x4_ct_vxp ARM ARMV7 (Quad Core)
+ vexpress_ca9x4 ARM ARMV7 (Quad Core)
+ vexpress_ca5x2 ARM ARMV7 (Dual Core)
Otavio Salvador <otavio@ossystems.com.br>
@@ -1023,9 +1036,8 @@
jadecpu ARM926EJS (MB86R01 SoC)
zmx25 ARM926EJS (imx25 SoC)
-Richard Woodruff <r-woodruff2@ti.com>
-
- omap2420h4 ARM1136EJS
+Josh Wu <josh.wu@atmel.com>
+ at91sam9n12ek ARM926EJS (AT91SAM9N12 SoC)
Ilya Yanok <yanok@emcraft.com>
@@ -1065,6 +1077,10 @@
vf610twr VF610
+Sergey Yanovich <ynvich@gmail.com>
+
+ lp8x4x xscale/pxa
+
-------------------------------------------------------------------------
Unknown / orphaned boards:
@@ -1085,9 +1101,19 @@
# Board CPU #
#########################################################################
-Graeme Russ <graeme.russ@gmail.com>
+Simon Glass <sjg@chromium.org>
- eNET AMD SC520
+ chromebook-x86 Coreboot runs first, then U-Boot
+ Supports Intel Sandy Bridge / Ivy Bridge so far
+
+ Chromebooks for x86, including:
+ Samsung Series 5 Chromebook
+ Acer AC700 Chromebook
+ Acer C7 Chromebook
+ Samsung Chromebook 550
+ HP Pavillion Chromebook
+ Acer C710 Chromebook
+ Chromebook Pixel
#########################################################################
# MIPS Systems: #
@@ -1353,5 +1379,16 @@
openrisc-generic OpenRISC
#########################################################################
+# Sandbox: #
+# #
+# Maintainer Name, Email Address #
+# Board CPU #
+#########################################################################
+
+Simon Glass <sjg@chromium.org>
+
+ sandbox sandbox
+
+#########################################################################
# End of MAINTAINERS list #
#########################################################################
diff --git a/MAKEALL b/MAKEALL
index 2737eab..2e16e0d 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -268,12 +268,6 @@
LIST_4xx="$(boards_by_cpu ppc4xx)"
#########################################################################
-## MPC8220 Systems
-#########################################################################
-
-LIST_8220="$(boards_by_cpu mpc8220)"
-
-#########################################################################
## MPC824x Systems
#########################################################################
@@ -324,7 +318,6 @@
${LIST_512x} \
${LIST_5xxx} \
${LIST_8xx} \
- ${LIST_8220} \
${LIST_824x} \
${LIST_8260} \
${LIST_83xx} \
diff --git a/Makefile b/Makefile
index 363180c..b1e5d5f 100644
--- a/Makefile
+++ b/Makefile
@@ -543,18 +543,15 @@
cat $(obj)spl/u-boot-spl-pad.img $(obj)u-boot.img > $@
ifneq ($(CONFIG_TEGRA),)
-ifeq ($(CONFIG_OF_SEPARATE),y)
-nodtb=dtb
-dtbfile=$(obj)u-boot.dtb
-else
-nodtb=nodtb
-dtbfile=
-endif
-
-$(obj)u-boot-$(nodtb)-tegra.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin $(dtbfile)
+$(obj)u-boot-nodtb-tegra.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SYS_TEXT_BASE) -O binary $(obj)spl/u-boot-spl $(obj)spl/u-boot-spl-pad.bin
- cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin $(dtbfile) > $@
+ cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $@
rm $(obj)spl/u-boot-spl-pad.bin
+
+ifeq ($(CONFIG_OF_SEPARATE),y)
+$(obj)u-boot-dtb-tegra.bin: $(obj)u-boot-nodtb-tegra.bin $(obj)u-boot.dtb
+ cat $(obj)u-boot-nodtb-tegra.bin $(obj)u-boot.dtb > $@
+endif
endif
$(obj)u-boot-img.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.img
@@ -746,6 +743,13 @@
$(MAKE) -C $@ all
endif # config.mk
+# ARM relocations should all be R_ARM_RELATIVE.
+checkarmreloc: $(obj)u-boot
+ @if test "R_ARM_RELATIVE" != \
+ "`readelf -r $< | cut -d ' ' -f 4 | grep R_ARM | sort -u`"; \
+ then echo "$< contains relocations other than \
+ R_ARM_RELATIVE"; false; fi
+
$(VERSION_FILE):
@mkdir -p $(dir $(VERSION_FILE))
@( localvers='$(shell $(TOPDIR)/tools/setlocalversion $(TOPDIR))' ; \
diff --git a/README b/README
index b72ab2f..b1b3e17 100644
--- a/README
+++ b/README
@@ -201,7 +201,6 @@
/mpc5xx Files specific to Freescale MPC5xx CPUs
/mpc5xxx Files specific to Freescale MPC5xxx CPUs
/mpc8xx Files specific to Freescale MPC8xx CPUs
- /mpc8220 Files specific to Freescale MPC8220 CPUs
/mpc824x Files specific to Freescale MPC824x CPUs
/mpc8260 Files specific to Freescale MPC8260 CPUs
/mpc85xx Files specific to Freescale MPC85xx CPUs
@@ -899,6 +898,7 @@
CONFIG_CMD_SF * Read/write/erase SPI NOR flash
CONFIG_CMD_SHA1SUM print sha1 memory digest
(requires CONFIG_CMD_MEMORY)
+ CONFIG_CMD_SOFTSWITCH * Soft switch setting command for BF60x
CONFIG_CMD_SOURCE "source" command Support
CONFIG_CMD_SPI * SPI serial bus support
CONFIG_CMD_TFTPSRV * TFTP transfer in server mode
@@ -2997,6 +2997,12 @@
use an arch-specific makefile fragment instead, for
example if more than one image needs to be produced.
+ CONFIG_FIT_SPL_PRINT
+ Printing information about a FIT image adds quite a bit of
+ code to SPL. So this is normally disabled in SPL. Use this
+ option to re-enable it. This will affect the output of the
+ bootm command when booting a FIT image.
+
Modem Support:
--------------
@@ -5062,7 +5068,7 @@
using the "bootz" command. The syntax of "bootz" command is the same
as the syntax of "bootm" command.
-Note, defining the CONFIG_SUPPORT_INITRD_RAW allows user to supply
+Note, defining the CONFIG_SUPPORT_RAW_INITRD allows user to supply
kernel with raw initrd images. The syntax is slightly different, the
address of the initrd must be augmented by it's size, in the following
format: "<initrd addres>:<initrd size>".
diff --git a/api/api_platform-powerpc.c b/api/api_platform-powerpc.c
index a3d981f..ceb1271 100644
--- a/api/api_platform-powerpc.c
+++ b/api/api_platform-powerpc.c
@@ -55,8 +55,6 @@
#define bi_bar bi_mbar_base
#elif defined(CONFIG_MPC83xx)
#define bi_bar bi_immrbar
-#elif defined(CONFIG_MPC8220)
-#define bi_bar bi_mbar_base
#endif
#if defined(bi_bar)
diff --git a/arch/arm/config.mk b/arch/arm/config.mk
index 461899e..e80e1ed 100644
--- a/arch/arm/config.mk
+++ b/arch/arm/config.mk
@@ -31,6 +31,9 @@
endif
endif
+LDFLAGS_FINAL += --gc-sections
+PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections
+
# Support generic board on ARM
__HAVE_ARCH_GENERIC_BOARD := y
@@ -106,3 +109,8 @@
PLATFORM_RELFLAGS += -fno-optimize-sibling-calls
endif
endif
+
+# check that only R_ARM_RELATIVE relocations are generated
+ifneq ($(CONFIG_SPL_BUILD),y)
+ALL-y += checkarmreloc
+endif
diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S
index ccea2d5..a7e0c28 100644
--- a/arch/arm/cpu/arm1136/start.S
+++ b/arch/arm/cpu/arm1136/start.S
@@ -104,10 +104,6 @@
_bss_start_ofs:
.word __bss_start - _start
-.globl _image_copy_end_ofs
-_image_copy_end_ofs:
- .word __image_copy_end - _start
-
.globl _bss_end_ofs
_bss_end_ofs:
.word __bss_end - _start
@@ -146,24 +142,6 @@
orr r0,r0,#0xd3
msr cpsr,r0
-#ifdef CONFIG_OMAP2420H4
- /* Copy vectors to mask ROM indirect addr */
- adr r0, _start /* r0 <- current position of code */
- add r0, r0, #4 /* skip reset vector */
- mov r2, #64 /* r2 <- size to copy */
- add r2, r0, r2 /* r2 <- source end address */
- mov r1, #SRAM_OFFSET0 /* build vect addr */
- mov r3, #SRAM_OFFSET1
- add r1, r1, r3
- mov r3, #SRAM_OFFSET2
- add r1, r1, r3
-next:
- ldmia r0!, {r3-r10} /* copy from source address [r0] */
- stmia r1!, {r3-r10} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- bne next /* loop until equal */
- bl cpy_clk_code /* put dpll adjust code behind vectors */
-#endif
/* the mask ROM code should have PLL and others stable */
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
bl cpu_init_crit
@@ -173,83 +151,6 @@
/*------------------------------------------------------------------------------*/
-/*
- * void relocate_code(addr_moni)
- *
- * This function relocates the monitor code.
- */
- .globl relocate_code
-relocate_code:
- mov r6, r0 /* save addr of destination */
-
- adr r0, _start
- subs r9, r6, r0 /* r9 <- relocation offset */
- beq relocate_done /* skip relocation */
- mov r1, r6 /* r1 <- scratch for copy_loop */
- ldr r3, _image_copy_end_ofs
- add r2, r0, r3 /* r2 <- source end address */
-
-copy_loop:
- ldmia r0!, {r10-r11} /* copy from source address [r0] */
- stmia r1!, {r10-r11} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- blo copy_loop
-
-#ifndef CONFIG_SPL_BUILD
- /*
- * fix .rel.dyn relocations
- */
- ldr r0, _TEXT_BASE /* r0 <- Text base */
- ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
- add r10, r10, r0 /* r10 <- sym table in FLASH */
- ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
- add r2, r2, r0 /* r2 <- rel dyn start in FLASH */
- ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
- add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
-fixloop:
- ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
- add r0, r0, r9 /* r0 <- location to fix up in RAM */
- ldr r1, [r2, #4]
- and r7, r1, #0xff
- cmp r7, #23 /* relative fixup? */
- beq fixrel
- cmp r7, #2 /* absolute fixup? */
- beq fixabs
- /* ignore unknown type of fixup */
- b fixnext
-fixabs:
- /* absolute fix: set location to (offset) symbol value */
- mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
- add r1, r10, r1 /* r1 <- address of symbol in table */
- ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r1, r9 /* r1 <- relocated sym addr */
- b fixnext
-fixrel:
- /* relative fix: increase location by offset */
- ldr r1, [r0]
- add r1, r1, r9
-fixnext:
- str r1, [r0]
- add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
- cmp r2, r3
- blo fixloop
-#endif
-
-relocate_done:
-
- bx lr
-
-#ifndef CONFIG_SPL_BUILD
-
-_rel_dyn_start_ofs:
- .word __rel_dyn_start - _start
-_rel_dyn_end_ofs:
- .word __rel_dyn_end - _start
-_dynsym_start_ofs:
- .word __dynsym_start - _start
-
-#endif
-
.globl c_runtime_cpu_setup
c_runtime_cpu_setup:
diff --git a/arch/arm/cpu/arm1176/start.S b/arch/arm/cpu/arm1176/start.S
index f20da8e..65292bc 100644
--- a/arch/arm/cpu/arm1176/start.S
+++ b/arch/arm/cpu/arm1176/start.S
@@ -112,10 +112,6 @@
_bss_start_ofs:
.word __bss_start - _start
-.globl _image_copy_end_ofs
-_image_copy_end_ofs:
- .word __image_copy_end - _start
-
.globl _bss_end_ofs
_bss_end_ofs:
.word __bss_end - _start
@@ -225,79 +221,6 @@
/*------------------------------------------------------------------------------*/
-/*
- * void relocate_code(addr_moni)
- *
- * This function relocates the monitor code.
- */
- .globl relocate_code
-relocate_code:
- mov r6, r0 /* save addr of destination */
-
- adr r0, _start
- subs r9, r6, r0 /* r9 <- relocation offset */
- beq relocate_done /* skip relocation */
- mov r1, r6 /* r1 <- scratch for copy_loop */
- ldr r3, _image_copy_end_ofs
- add r2, r0, r3 /* r2 <- source end address */
-
-copy_loop:
- ldmia r0!, {r10-r11} /* copy from source address [r0] */
- stmia r1!, {r10-r11} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- blo copy_loop
-
-#ifndef CONFIG_SPL_BUILD
- /*
- * fix .rel.dyn relocations
- */
- ldr r0, _TEXT_BASE /* r0 <- Text base */
- ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
- add r10, r10, r0 /* r10 <- sym table in FLASH */
- ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
- add r2, r2, r0 /* r2 <- rel dyn start in FLASH */
- ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
- add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
-fixloop:
- ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
- add r0, r0, r9 /* r0 <- location to fix up in RAM */
- ldr r1, [r2, #4]
- and r7, r1, #0xff
- cmp r7, #23 /* relative fixup? */
- beq fixrel
- cmp r7, #2 /* absolute fixup? */
- beq fixabs
- /* ignore unknown type of fixup */
- b fixnext
-fixabs:
- /* absolute fix: set location to (offset) symbol value */
- mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
- add r1, r10, r1 /* r1 <- address of symbol in table */
- ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r1, r9 /* r1 <- relocated sym addr */
- b fixnext
-fixrel:
- /* relative fix: increase location by offset */
- ldr r1, [r0]
- add r1, r1, r9
-fixnext:
- str r1, [r0]
- add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
- cmp r2, r3
- blo fixloop
-#endif
-
-relocate_done:
-
- bx lr
-
-_rel_dyn_start_ofs:
- .word __rel_dyn_start - _start
-_rel_dyn_end_ofs:
- .word __rel_dyn_end - _start
-_dynsym_start_ofs:
- .word __dynsym_start - _start
-
.globl c_runtime_cpu_setup
c_runtime_cpu_setup:
diff --git a/arch/arm/cpu/arm720t/start.S b/arch/arm/cpu/arm720t/start.S
index 9facc7e..a396ebc 100644
--- a/arch/arm/cpu/arm720t/start.S
+++ b/arch/arm/cpu/arm720t/start.S
@@ -101,10 +101,6 @@
_bss_start_ofs:
.word __bss_start - _start
-.globl _image_copy_end_ofs
-_image_copy_end_ofs:
- .word __image_copy_end - _start
-
.globl _bss_end_ofs
_bss_end_ofs:
.word __bss_end - _start
@@ -155,79 +151,6 @@
/*------------------------------------------------------------------------------*/
-/*
- * void relocate_code(addr_moni)
- *
- * This function relocates the monitor code.
- */
- .globl relocate_code
-relocate_code:
- mov r6, r0 /* save addr of destination */
-
- adr r0, _start
- subs r9, r6, r0 /* r9 <- relocation offset */
- beq relocate_done /* skip relocation */
- mov r1, r6 /* r1 <- scratch for copy_loop */
- ldr r3, _image_copy_end_ofs
- add r2, r0, r3 /* r2 <- source end address */
-
-copy_loop:
- ldmia r0!, {r10-r11} /* copy from source address [r0] */
- stmia r1!, {r10-r11} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- blo copy_loop
-
-#ifndef CONFIG_SPL_BUILD
- /*
- * fix .rel.dyn relocations
- */
- ldr r0, _TEXT_BASE /* r0 <- Text base */
- ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
- add r10, r10, r0 /* r10 <- sym table in FLASH */
- ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
- add r2, r2, r0 /* r2 <- rel dyn start in FLASH */
- ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
- add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
-fixloop:
- ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
- add r0, r0, r9 /* r0 <- location to fix up in RAM */
- ldr r1, [r2, #4]
- and r7, r1, #0xff
- cmp r7, #23 /* relative fixup? */
- beq fixrel
- cmp r7, #2 /* absolute fixup? */
- beq fixabs
- /* ignore unknown type of fixup */
- b fixnext
-fixabs:
- /* absolute fix: set location to (offset) symbol value */
- mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
- add r1, r10, r1 /* r1 <- address of symbol in table */
- ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r1, r9 /* r1 <- relocated sym addr */
- b fixnext
-fixrel:
- /* relative fix: increase location by offset */
- ldr r1, [r0]
- add r1, r1, r9
-fixnext:
- str r1, [r0]
- add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
- cmp r2, r3
- blo fixloop
-#endif
-
-relocate_done:
-
- mov pc, lr
-
-_rel_dyn_start_ofs:
- .word __rel_dyn_start - _start
-_rel_dyn_end_ofs:
- .word __rel_dyn_end - _start
-_dynsym_start_ofs:
- .word __dynsym_start - _start
-
.globl c_runtime_cpu_setup
c_runtime_cpu_setup:
@@ -244,9 +167,9 @@
*************************************************************************
*/
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
cpu_init_crit:
-#if !defined(CONFIG_TEGRA)
mov ip, lr
/*
* before relocating, we have to setup RAM timing
@@ -255,9 +178,9 @@
*/
bl lowlevel_init
mov lr, ip
-#endif
mov pc, lr
+#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
#ifndef CONFIG_SPL_BUILD
diff --git a/arch/arm/cpu/arm920t/ep93xx/u-boot.lds b/arch/arm/cpu/arm920t/ep93xx/u-boot.lds
index cf55bf7..367c805 100644
--- a/arch/arm/cpu/arm920t/ep93xx/u-boot.lds
+++ b/arch/arm/cpu/arm920t/ep93xx/u-boot.lds
@@ -31,6 +31,7 @@
. = ALIGN(4);
.text :
{
+ *(.__image_copy_start)
arch/arm/cpu/arm920t/start.o (.text*)
/* the EP93xx expects to find the pattern 'CRUS' at 0x1000 */
. = 0x1000;
@@ -56,7 +57,10 @@
. = ALIGN(4);
- __image_copy_end = .;
+ .image_copy_end :
+ {
+ *(.__image_copy_end)
+ }
__bss_start = .;
.bss : { *(.bss*) }
diff --git a/arch/arm/cpu/arm920t/start.S b/arch/arm/cpu/arm920t/start.S
index 6250025..3232065 100644
--- a/arch/arm/cpu/arm920t/start.S
+++ b/arch/arm/cpu/arm920t/start.S
@@ -89,10 +89,6 @@
_bss_start_ofs:
.word __bss_start - _start
-.globl _image_copy_end_ofs
-_image_copy_end_ofs:
- .word __image_copy_end - _start
-
.globl _bss_end_ofs
_bss_end_ofs:
.word __bss_end - _start
@@ -194,79 +190,6 @@
/*------------------------------------------------------------------------------*/
-/*
- * void relocate_code(addr_moni)
- *
- * This function relocates the monitor code.
- */
- .globl relocate_code
-relocate_code:
- mov r6, r0 /* save addr of destination */
-
- adr r0, _start
- subs r9, r6, r0 /* r9 <- relocation offset */
- beq relocate_done /* skip relocation */
- mov r1, r6 /* r1 <- scratch for copy_loop */
- ldr r3, _image_copy_end_ofs
- add r2, r0, r3 /* r2 <- source end address */
-
-copy_loop:
- ldmia r0!, {r10-r11} /* copy from source address [r0] */
- stmia r1!, {r10-r11} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- blo copy_loop
-
-#ifndef CONFIG_SPL_BUILD
- /*
- * fix .rel.dyn relocations
- */
- ldr r0, _TEXT_BASE /* r0 <- Text base */
- ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
- add r10, r10, r0 /* r10 <- sym table in FLASH */
- ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
- add r2, r2, r0 /* r2 <- rel dyn start in FLASH */
- ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
- add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
-fixloop:
- ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
- add r0, r0, r9 /* r0 <- location to fix up in RAM */
- ldr r1, [r2, #4]
- and r7, r1, #0xff
- cmp r7, #23 /* relative fixup? */
- beq fixrel
- cmp r7, #2 /* absolute fixup? */
- beq fixabs
- /* ignore unknown type of fixup */
- b fixnext
-fixabs:
- /* absolute fix: set location to (offset) symbol value */
- mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
- add r1, r10, r1 /* r1 <- address of symbol in table */
- ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r1, r9 /* r1 <- relocated sym addr */
- b fixnext
-fixrel:
- /* relative fix: increase location by offset */
- ldr r1, [r0]
- add r1, r1, r9
-fixnext:
- str r1, [r0]
- add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
- cmp r2, r3
- blo fixloop
-#endif
-
-relocate_done:
-
- mov pc, lr
-
-_rel_dyn_start_ofs:
- .word __rel_dyn_start - _start
-_rel_dyn_end_ofs:
- .word __rel_dyn_end - _start
-_dynsym_start_ofs:
- .word __dynsym_start - _start
-
.globl c_runtime_cpu_setup
c_runtime_cpu_setup:
diff --git a/arch/arm/cpu/arm925t/start.S b/arch/arm/cpu/arm925t/start.S
index 021e241..97eb276 100644
--- a/arch/arm/cpu/arm925t/start.S
+++ b/arch/arm/cpu/arm925t/start.S
@@ -95,10 +95,6 @@
_bss_start_ofs:
.word __bss_start - _start
-.globl _image_copy_end_ofs
-_image_copy_end_ofs:
- .word __image_copy_end - _start
-
.globl _bss_end_ofs
_bss_end_ofs:
.word __bss_end - _start
@@ -184,79 +180,6 @@
/*------------------------------------------------------------------------------*/
-/*
- * void relocate_code(addr_moni)
- *
- * This function relocates the monitor code.
- */
- .globl relocate_code
-relocate_code:
- mov r6, r0 /* save addr of destination */
-
- adr r0, _start
- subs r9, r6, r0 /* r9 <- relocation offset */
- beq relocate_done /* skip relocation */
- mov r1, r6 /* r1 <- scratch for copy_loop */
- ldr r3, _image_copy_end_ofs
- add r2, r0, r3 /* r2 <- source end address */
-
-copy_loop:
- ldmia r0!, {r10-r11} /* copy from source address [r0] */
- stmia r1!, {r10-r11} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- blo copy_loop
-
-#ifndef CONFIG_SPL_BUILD
- /*
- * fix .rel.dyn relocations
- */
- ldr r0, _TEXT_BASE /* r0 <- Text base */
- ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
- add r10, r10, r0 /* r10 <- sym table in FLASH */
- ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
- add r2, r2, r0 /* r2 <- rel dyn start in FLASH */
- ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
- add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
-fixloop:
- ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
- add r0, r0, r9 /* r0 <- location to fix up in RAM */
- ldr r1, [r2, #4]
- and r7, r1, #0xff
- cmp r7, #23 /* relative fixup? */
- beq fixrel
- cmp r7, #2 /* absolute fixup? */
- beq fixabs
- /* ignore unknown type of fixup */
- b fixnext
-fixabs:
- /* absolute fix: set location to (offset) symbol value */
- mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
- add r1, r10, r1 /* r1 <- address of symbol in table */
- ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r1, r9 /* r1 <- relocated sym addr */
- b fixnext
-fixrel:
- /* relative fix: increase location by offset */
- ldr r1, [r0]
- add r1, r1, r9
-fixnext:
- str r1, [r0]
- add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
- cmp r2, r3
- blo fixloop
-#endif
-
-relocate_done:
-
- mov pc, lr
-
-_rel_dyn_start_ofs:
- .word __rel_dyn_start - _start
-_rel_dyn_end_ofs:
- .word __rel_dyn_end - _start
-_dynsym_start_ofs:
- .word __dynsym_start - _start
-
.globl c_runtime_cpu_setup
c_runtime_cpu_setup:
diff --git a/arch/arm/cpu/arm926ejs/at91/Makefile b/arch/arm/cpu/arm926ejs/at91/Makefile
index 346e58f..c4408f6 100644
--- a/arch/arm/cpu/arm926ejs/at91/Makefile
+++ b/arch/arm/cpu/arm926ejs/at91/Makefile
@@ -35,6 +35,7 @@
COBJS-$(CONFIG_AT91SAM9RL) += at91sam9rl_devices.o
COBJS-$(CONFIG_AT91SAM9M10G45) += at91sam9m10g45_devices.o
COBJS-$(CONFIG_AT91SAM9G45) += at91sam9m10g45_devices.o
+COBJS-$(CONFIG_AT91SAM9N12) += at91sam9n12_devices.o
COBJS-$(CONFIG_AT91SAM9X5) += at91sam9x5_devices.o
COBJS-$(CONFIG_AT91_EFLASH) += eflash.o
COBJS-$(CONFIG_AT91_LED) += led.o
diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c
index 19ec615..5e995e1 100644
--- a/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c
+++ b/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c
@@ -203,6 +203,10 @@
#if defined(CONFIG_GENERIC_ATMEL_MCI)
void at91_mci_hw_init(void)
{
+ /* Enable mci clock */
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+ writel(1 << ATMEL_ID_MCI, &pmc->pcer);
+
at91_set_a_periph(AT91_PIO_PORTA, 8, 1); /* MCCK */
#if defined(CONFIG_ATMEL_MCI_PORTB)
at91_set_b_periph(AT91_PIO_PORTA, 1, 1); /* MCCDB */
diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9n12_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9n12_devices.c
new file mode 100644
index 0000000..6eaeac0
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/at91/at91sam9n12_devices.c
@@ -0,0 +1,177 @@
+/*
+ * (C) Copyright 2013 Atmel Corporation
+ * Josh Wu <josh.wu@atmel.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_pio.h>
+
+unsigned int has_lcdc()
+{
+ return 1;
+}
+
+void at91_serial0_hw_init(void)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+ at91_set_a_periph(AT91_PIO_PORTA, 0, 1); /* TXD0 */
+ at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* RXD0 */
+ writel(1 << ATMEL_ID_USART0, &pmc->pcer);
+}
+
+void at91_serial1_hw_init(void)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+ at91_set_a_periph(AT91_PIO_PORTA, 5, 1); /* TXD1 */
+ at91_set_a_periph(AT91_PIO_PORTA, 6, 0); /* RXD1 */
+ writel(1 << ATMEL_ID_USART1, &pmc->pcer);
+}
+
+void at91_serial2_hw_init(void)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+ at91_set_a_periph(AT91_PIO_PORTA, 7, 1); /* TXD2 */
+ at91_set_a_periph(AT91_PIO_PORTA, 8, 0); /* RXD2 */
+ writel(1 << ATMEL_ID_USART2, &pmc->pcer);
+}
+
+void at91_serial3_hw_init(void)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+ at91_set_b_periph(AT91_PIO_PORTC, 22, 1); /* TXD3 */
+ at91_set_b_periph(AT91_PIO_PORTC, 23, 0); /* RXD3 */
+ writel(1 << ATMEL_ID_USART3, &pmc->pcer);
+}
+
+void at91_seriald_hw_init(void)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+ at91_set_a_periph(AT91_PIO_PORTA, 10, 1); /* DTXD */
+ at91_set_a_periph(AT91_PIO_PORTA, 9, 0); /* DRXD */
+ writel(1 << ATMEL_ID_SYS, &pmc->pcer);
+}
+
+#ifdef CONFIG_ATMEL_SPI
+void at91_spi0_hw_init(unsigned long cs_mask)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+ at91_set_a_periph(AT91_PIO_PORTA, 11, 0); /* SPI0_MISO */
+ at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* SPI0_MOSI */
+ at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* SPI0_SPCK */
+
+ /* Enable clock */
+ writel(1 << ATMEL_ID_SPI0, &pmc->pcer);
+
+ if (cs_mask & (1 << 0))
+ at91_set_pio_output(AT91_PIO_PORTA, 14, 1);
+ if (cs_mask & (1 << 1))
+ at91_set_pio_output(AT91_PIO_PORTA, 7, 1);
+ if (cs_mask & (1 << 2))
+ at91_set_pio_output(AT91_PIO_PORTA, 1, 1);
+ if (cs_mask & (1 << 3))
+ at91_set_pio_output(AT91_PIO_PORTB, 3, 1);
+}
+
+void at91_spi1_hw_init(unsigned long cs_mask)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+ at91_set_b_periph(AT91_PIO_PORTA, 21, 0); /* SPI1_MISO */
+ at91_set_b_periph(AT91_PIO_PORTA, 22, 0); /* SPI1_MOSI */
+ at91_set_b_periph(AT91_PIO_PORTA, 23, 0); /* SPI1_SPCK */
+
+ /* Enable clock */
+ writel(1 << ATMEL_ID_SPI1, &pmc->pcer);
+
+ if (cs_mask & (1 << 0))
+ at91_set_pio_output(AT91_PIO_PORTA, 8, 1);
+ if (cs_mask & (1 << 1))
+ at91_set_pio_output(AT91_PIO_PORTA, 0, 1);
+ if (cs_mask & (1 << 2))
+ at91_set_pio_output(AT91_PIO_PORTA, 31, 1);
+ if (cs_mask & (1 << 3))
+ at91_set_pio_output(AT91_PIO_PORTA, 30, 1);
+}
+#endif
+
+void at91_mci_hw_init(void)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+ at91_set_a_periph(AT91_PIO_PORTA, 17, 0); /* MCCK */
+ at91_set_a_periph(AT91_PIO_PORTA, 16, 0); /* MCCDA */
+ at91_set_a_periph(AT91_PIO_PORTA, 15, 0); /* MCDA0 */
+ at91_set_a_periph(AT91_PIO_PORTA, 18, 0); /* MCDA1 */
+ at91_set_a_periph(AT91_PIO_PORTA, 19, 0); /* MCDA2 */
+ at91_set_a_periph(AT91_PIO_PORTA, 20, 0); /* MCDA3 */
+
+ writel(1 << ATMEL_ID_HSMCI0, &pmc->pcer);
+}
+
+#ifdef CONFIG_LCD
+void at91_lcd_hw_init(void)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+ at91_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDDPWR */
+ at91_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDVSYNC */
+ at91_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDHSYNC */
+ at91_set_a_periph(AT91_PIO_PORTC, 28, 0); /* LCDDOTCK */
+ at91_set_a_periph(AT91_PIO_PORTC, 29, 0); /* LCDDEN */
+ at91_set_a_periph(AT91_PIO_PORTC, 30, 0); /* LCDDOTCK */
+
+ at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* LCDD0 */
+ at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* LCDD1 */
+ at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* LCDD2 */
+ at91_set_a_periph(AT91_PIO_PORTC, 3, 0); /* LCDD3 */
+ at91_set_a_periph(AT91_PIO_PORTC, 4, 0); /* LCDD4 */
+ at91_set_a_periph(AT91_PIO_PORTC, 5, 0); /* LCDD5 */
+ at91_set_a_periph(AT91_PIO_PORTC, 6, 0); /* LCDD6 */
+ at91_set_a_periph(AT91_PIO_PORTC, 7, 0); /* LCDD7 */
+ at91_set_a_periph(AT91_PIO_PORTC, 8, 0); /* LCDD8 */
+ at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* LCDD9 */
+ at91_set_a_periph(AT91_PIO_PORTC, 10, 0); /* LCDD10 */
+ at91_set_a_periph(AT91_PIO_PORTC, 11, 0); /* LCDD11 */
+ at91_set_a_periph(AT91_PIO_PORTC, 12, 0); /* LCDD12 */
+ at91_set_a_periph(AT91_PIO_PORTC, 13, 0); /* LCDD13 */
+ at91_set_a_periph(AT91_PIO_PORTC, 14, 0); /* LCDD14 */
+ at91_set_a_periph(AT91_PIO_PORTC, 15, 0); /* LCDD15 */
+ at91_set_a_periph(AT91_PIO_PORTC, 16, 0); /* LCDD16 */
+ at91_set_a_periph(AT91_PIO_PORTC, 17, 0); /* LCDD17 */
+ at91_set_a_periph(AT91_PIO_PORTC, 18, 0); /* LCDD18 */
+ at91_set_a_periph(AT91_PIO_PORTC, 19, 0); /* LCDD19 */
+ at91_set_a_periph(AT91_PIO_PORTC, 20, 0); /* LCDD20 */
+ at91_set_a_periph(AT91_PIO_PORTC, 21, 0); /* LCDD21 */
+ at91_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDD22 */
+ at91_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDD23 */
+
+ writel(1 << ATMEL_ID_LCDC, &pmc->pcer);
+}
+#endif
diff --git a/arch/arm/cpu/arm926ejs/at91/clock.c b/arch/arm/cpu/arm926ejs/at91/clock.c
index f825388..5b4923f 100644
--- a/arch/arm/cpu/arm926ejs/at91/clock.c
+++ b/arch/arm/cpu/arm926ejs/at91/clock.c
@@ -156,7 +156,7 @@
*/
mckr = readl(&pmc->mckr);
#if defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) \
- || defined(CONFIG_AT91SAM9X5)
+ || defined(CONFIG_AT91SAM9N12) || defined(CONFIG_AT91SAM9X5)
/* plla divisor by 2 */
gd->arch.plla_rate_hz /= (1 << ((mckr & 1 << 12) >> 12));
#endif
@@ -171,7 +171,7 @@
if (mckr & AT91_PMC_MCKR_MDIV_MASK)
freq /= 2; /* processor clock division */
#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) \
- || defined(CONFIG_AT91SAM9X5)
+ || defined(CONFIG_AT91SAM9N12) || defined(CONFIG_AT91SAM9X5)
/* mdiv <==> divisor
* 0 <==> 1
* 1 <==> 2
diff --git a/arch/arm/cpu/arm926ejs/davinci/Makefile b/arch/arm/cpu/arm926ejs/davinci/Makefile
index dec7bfb..bba4671 100644
--- a/arch/arm/cpu/arm926ejs/davinci/Makefile
+++ b/arch/arm/cpu/arm926ejs/davinci/Makefile
@@ -33,6 +33,7 @@
COBJS-$(CONFIG_SOC_DM365) += dm365.o
COBJS-$(CONFIG_SOC_DM644X) += dm644x.o
COBJS-$(CONFIG_SOC_DM646X) += dm646x.o
+COBJS-$(CONFIG_SOC_DA830) += da830_pinmux.o
COBJS-$(CONFIG_SOC_DA850) += da850_pinmux.o
COBJS-$(CONFIG_DRIVER_TI_EMAC) += lxt972.o dp83848.o et1011c.o ksz8873.o
diff --git a/arch/arm/cpu/arm926ejs/davinci/da830_pinmux.c b/arch/arm/cpu/arm926ejs/davinci/da830_pinmux.c
new file mode 100644
index 0000000..d0c964a
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/davinci/da830_pinmux.c
@@ -0,0 +1,151 @@
+/*
+ * Pinmux configurations for the DA830 SoCs
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <common.h>
+#include <asm/arch/davinci_misc.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/pinmux_defs.h>
+
+/* SPI0 pin muxer settings */
+const struct pinmux_config spi0_pins_base[] = {
+ { pinmux(7), 1, 3 }, /* SPI0_SOMI */
+ { pinmux(7), 1, 4 }, /* SPI0_SIMO */
+ { pinmux(7), 1, 6 } /* SPI0_CLK */
+};
+
+const struct pinmux_config spi0_pins_scs0[] = {
+ { pinmux(7), 1, 7 } /* SPI0_SCS[0] */
+};
+
+const struct pinmux_config spi0_pins_ena[] = {
+ { pinmux(7), 1, 5 } /* SPI0_ENA */
+};
+
+/* NAND pin muxer settings */
+const struct pinmux_config emifa_pins_cs0[] = {
+ { pinmux(18), 1, 2 } /* EMA_CS[0] */
+};
+
+const struct pinmux_config emifa_pins_cs2[] = {
+ { pinmux(18), 1, 3 } /* EMA_CS[2] */
+};
+
+const struct pinmux_config emifa_pins_cs3[] = {
+ { pinmux(18), 1, 4 } /* EMA_CS[3] */
+};
+
+#ifdef CONFIG_USE_NAND
+const struct pinmux_config emifa_pins[] = {
+ { pinmux(13), 1, 6 }, /* EMA_D[0] */
+ { pinmux(13), 1, 7 }, /* EMA_D[1] */
+ { pinmux(14), 1, 0 }, /* EMA_D[2] */
+ { pinmux(14), 1, 1 }, /* EMA_D[3] */
+ { pinmux(14), 1, 2 }, /* EMA_D[4] */
+ { pinmux(14), 1, 3 }, /* EMA_D[5] */
+ { pinmux(14), 1, 4 }, /* EMA_D[6] */
+ { pinmux(14), 1, 5 }, /* EMA_D[7] */
+ { pinmux(14), 1, 6 }, /* EMA_D[8] */
+ { pinmux(14), 1, 7 }, /* EMA_D[9] */
+ { pinmux(15), 1, 0 }, /* EMA_D[10] */
+ { pinmux(15), 1, 1 }, /* EMA_D[11] */
+ { pinmux(15), 1, 2 }, /* EMA_D[12] */
+ { pinmux(15), 1, 3 }, /* EMA_D[13] */
+ { pinmux(15), 1, 4 }, /* EMA_D[14] */
+ { pinmux(15), 1, 5 }, /* EMA_D[15] */
+ { pinmux(15), 1, 6 }, /* EMA_A[0] */
+ { pinmux(15), 1, 7 }, /* EMA_A[1] */
+ { pinmux(16), 1, 0 }, /* EMA_A[2] */
+ { pinmux(16), 1, 1 }, /* EMA_A[3] */
+ { pinmux(16), 1, 2 }, /* EMA_A[4] */
+ { pinmux(16), 1, 3 }, /* EMA_A[5] */
+ { pinmux(16), 1, 4 }, /* EMA_A[6] */
+ { pinmux(16), 1, 5 }, /* EMA_A[7] */
+ { pinmux(16), 1, 6 }, /* EMA_A[8] */
+ { pinmux(16), 1, 7 }, /* EMA_A[9] */
+ { pinmux(17), 1, 0 }, /* EMA_A[10] */
+ { pinmux(17), 1, 1 }, /* EMA_A[11] */
+ { pinmux(17), 1, 2 }, /* EMA_A[12] */
+ { pinmux(17), 1, 3 }, /* EMA_BA[1] */
+ { pinmux(17), 1, 4 }, /* EMA_BA[0] */
+ { pinmux(17), 1, 5 }, /* EMA_CLK */
+ { pinmux(17), 1, 6 }, /* EMA_SDCKE */
+ { pinmux(17), 1, 7 }, /* EMA_CAS */
+ { pinmux(18), 1, 0 }, /* EMA_CAS */
+ { pinmux(18), 1, 1 }, /* EMA_WE */
+ { pinmux(18), 1, 5 }, /* EMA_OE */
+ { pinmux(18), 1, 6 }, /* EMA_WE_DQM[1] */
+ { pinmux(18), 1, 7 }, /* EMA_WE_DQM[0] */
+ { pinmux(10), 1, 0 } /* Tristate */
+};
+#endif
+
+/* EMAC PHY interface pins */
+const struct pinmux_config emac_pins_rmii[] = {
+ { pinmux(10), 2, 1 }, /* RMII_TXD[0] */
+ { pinmux(10), 2, 2 }, /* RMII_TXD[1] */
+ { pinmux(10), 2, 3 }, /* RMII_TXEN */
+ { pinmux(10), 2, 4 }, /* RMII_CRS_DV */
+ { pinmux(10), 2, 5 }, /* RMII_RXD[0] */
+ { pinmux(10), 2, 6 }, /* RMII_RXD[1] */
+ { pinmux(10), 2, 7 } /* RMII_RXER */
+};
+
+const struct pinmux_config emac_pins_mdio[] = {
+ { pinmux(11), 2, 0 }, /* MDIO_CLK */
+ { pinmux(11), 2, 1 } /* MDIO_D */
+};
+
+const struct pinmux_config emac_pins_rmii_clk_source[] = {
+ { pinmux(9), 0, 5 } /* ref.clk from external source */
+};
+
+/* UART2 pin muxer settings */
+const struct pinmux_config uart2_pins_txrx[] = {
+ { pinmux(8), 2, 7 }, /* UART2_RXD */
+ { pinmux(9), 2, 0 } /* UART2_TXD */
+};
+
+/* I2C0 pin muxer settings */
+const struct pinmux_config i2c0_pins[] = {
+ { pinmux(8), 2, 3 }, /* I2C0_SDA */
+ { pinmux(8), 2, 4 } /* I2C0_SCL */
+};
+
+/* USB0_DRVVBUS pin muxer settings */
+const struct pinmux_config usb_pins[] = {
+ { pinmux(9), 1, 1 } /* USB0_DRVVBUS */
+};
+
+#ifdef CONFIG_DAVINCI_MMC
+/* MMC0 pin muxer settings */
+const struct pinmux_config mmc0_pins_8bit[] = {
+ { pinmux(15), 2, 7 }, /* MMCSD0_CLK */
+ { pinmux(16), 2, 0 }, /* MMCSD0_CMD */
+ { pinmux(13), 2, 6 }, /* MMCSD0_DAT_0 */
+ { pinmux(13), 2, 7 }, /* MMCSD0_DAT_1 */
+ { pinmux(14), 2, 0 }, /* MMCSD0_DAT_2 */
+ { pinmux(14), 2, 1 }, /* MMCSD0_DAT_3 */
+ { pinmux(14), 2, 2 }, /* MMCSD0_DAT_4 */
+ { pinmux(14), 2, 3 }, /* MMCSD0_DAT_5 */
+ { pinmux(14), 2, 4 }, /* MMCSD0_DAT_6 */
+ { pinmux(14), 2, 5 } /* MMCSD0_DAT_7 */
+ /* DA830 supports 8-bit mode */
+};
+#endif
diff --git a/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds b/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds
index 673c725..f4e7525 100644
--- a/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds
+++ b/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds
@@ -57,11 +57,6 @@
__rel_dyn_end = .;
}
- .dynsym : {
- __dynsym_start = .;
- *(.dynsym)
- }
-
.bss : {
. = ALIGN(4);
__bss_start = .;
diff --git a/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds b/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
index 967a135..446d095 100644
--- a/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
+++ b/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
@@ -57,11 +57,6 @@
__rel_dyn_end = .;
}
- .dynsym : {
- __dynsym_start = .;
- *(.dynsym)
- }
-
.bss : {
. = ALIGN(4);
__bss_start = .;
diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S
index 4c567110..5fc8e04 100644
--- a/arch/arm/cpu/arm926ejs/start.S
+++ b/arch/arm/cpu/arm926ejs/start.S
@@ -136,10 +136,6 @@
_bss_start_ofs:
.word __bss_start - _start
-.globl _image_copy_end_ofs
-_image_copy_end_ofs:
- .word __image_copy_end - _start
-
.globl _bss_end_ofs
_bss_end_ofs:
.word __bss_end - _start
@@ -190,83 +186,6 @@
/*------------------------------------------------------------------------------*/
-/*
- * void relocate_code(addr_moni)
- *
- * This function relocates the monitor code.
- */
- .globl relocate_code
-relocate_code:
- mov r6, r0 /* save addr of destination */
-
- adr r0, _start
- subs r9, r6, r0 /* r9 <- relocation offset */
- beq relocate_done /* skip relocation */
- mov r1, r6 /* r1 <- scratch for copy loop */
- ldr r3, _image_copy_end_ofs
- add r2, r0, r3 /* r2 <- source end address */
-
-copy_loop:
- ldmia r0!, {r10-r11} /* copy from source address [r0] */
- stmia r1!, {r10-r11} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- blo copy_loop
-
-#ifndef CONFIG_SPL_BUILD
- /*
- * fix .rel.dyn relocations
- */
- ldr r0, _TEXT_BASE /* r0 <- Text base */
- ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
- add r10, r10, r0 /* r10 <- sym table in FLASH */
- ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
- add r2, r2, r0 /* r2 <- rel dyn start in FLASH */
- ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
- add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
-fixloop:
- ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
- add r0, r0, r9 /* r0 <- location to fix up in RAM */
- ldr r1, [r2, #4]
- and r7, r1, #0xff
- cmp r7, #23 /* relative fixup? */
- beq fixrel
- cmp r7, #2 /* absolute fixup? */
- beq fixabs
- /* ignore unknown type of fixup */
- b fixnext
-fixabs:
- /* absolute fix: set location to (offset) symbol value */
- mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
- add r1, r10, r1 /* r1 <- address of symbol in table */
- ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r1, r9 /* r1 <- relocated sym addr */
- b fixnext
-fixrel:
- /* relative fix: increase location by offset */
- ldr r1, [r0]
- add r1, r1, r9
-fixnext:
- str r1, [r0]
- add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
- cmp r2, r3
- blo fixloop
-#endif
-
-relocate_done:
-
- bx lr
-
-#ifndef CONFIG_SPL_BUILD
-
-_rel_dyn_start_ofs:
- .word __rel_dyn_start - _start
-_rel_dyn_end_ofs:
- .word __rel_dyn_end - _start
-_dynsym_start_ofs:
- .word __dynsym_start - _start
-
-#endif
-
.globl c_runtime_cpu_setup
c_runtime_cpu_setup:
diff --git a/arch/arm/cpu/arm946es/start.S b/arch/arm/cpu/arm946es/start.S
index 9c2b70d..e9d0c34 100644
--- a/arch/arm/cpu/arm946es/start.S
+++ b/arch/arm/cpu/arm946es/start.S
@@ -105,10 +105,6 @@
_bss_start_ofs:
.word __bss_start - _start
-.globl _image_copy_end_ofs
-_image_copy_end_ofs:
- .word __image_copy_end - _start
-
.globl _bss_end_ofs
_bss_end_ofs:
.word __bss_end - _start
@@ -159,79 +155,6 @@
/*------------------------------------------------------------------------------*/
-/*
- * void relocate_code(addr_moni)
- *
- * This function relocates the monitor code.
- */
- .globl relocate_code
-relocate_code:
- mov r6, r0 /* save addr of destination */
-
- adr r0, _start
- subs r9, r6, r0 /* r9 <- relocation offset */
- beq relocate_done /* skip relocation */
- mov r1, r6 /* r1 <- scratch for copy_loop */
- ldr r3, _image_copy_end_ofs
- add r2, r0, r3 /* r2 <- source end address */
-
-copy_loop:
- ldmia r0!, {r10-r11} /* copy from source address [r0] */
- stmia r1!, {r10-r11} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- blo copy_loop
-
-#ifndef CONFIG_SPL_BUILD
- /*
- * fix .rel.dyn relocations
- */
- ldr r0, _TEXT_BASE /* r0 <- Text base */
- ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
- add r10, r10, r0 /* r10 <- sym table in FLASH */
- ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
- add r2, r2, r0 /* r2 <- rel dyn start in FLASH */
- ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
- add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
-fixloop:
- ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
- add r0, r0, r9 /* r0 <- location to fix up in RAM */
- ldr r1, [r2, #4]
- and r7, r1, #0xff
- cmp r7, #23 /* relative fixup? */
- beq fixrel
- cmp r7, #2 /* absolute fixup? */
- beq fixabs
- /* ignore unknown type of fixup */
- b fixnext
-fixabs:
- /* absolute fix: set location to (offset) symbol value */
- mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
- add r1, r10, r1 /* r1 <- address of symbol in table */
- ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r1, r9 /* r1 <- relocated sym addr */
- b fixnext
-fixrel:
- /* relative fix: increase location by offset */
- ldr r1, [r0]
- add r1, r1, r9
-fixnext:
- str r1, [r0]
- add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
- cmp r2, r3
- blo fixloop
-#endif
-
-relocate_done:
-
- mov pc, lr
-
-_rel_dyn_start_ofs:
- .word __rel_dyn_start - _start
-_rel_dyn_end_ofs:
- .word __rel_dyn_end - _start
-_dynsym_start_ofs:
- .word __dynsym_start - _start
-
.globl c_runtime_cpu_setup
c_runtime_cpu_setup:
diff --git a/arch/arm/cpu/arm_intcm/start.S b/arch/arm/cpu/arm_intcm/start.S
index 5e8c528..8dfd919 100644
--- a/arch/arm/cpu/arm_intcm/start.S
+++ b/arch/arm/cpu/arm_intcm/start.S
@@ -101,10 +101,6 @@
_bss_start_ofs:
.word __bss_start - _start
-.globl _image_copy_end_ofs
-_image_copy_end_ofs:
- .word __image_copy_end - _start
-
.globl _bss_end_ofs
_bss_end_ofs:
.word __bss_end - _start
@@ -155,79 +151,6 @@
/*------------------------------------------------------------------------------*/
-/*
- * void relocate_code(addr_moni)
- *
- * This function relocates the monitor code.
- */
- .globl relocate_code
-relocate_code:
- mov r6, r0 /* save addr of destination */
-
- adr r0, _start
- subs r9, r6, r0 /* r9 <- relocation offset */
- beq relocate_done /* skip relocation */
- mov r1, r6 /* r1 <- scratch for copy_loop */
- ldr r3, _image_copy_end_ofs
- add r2, r0, r3 /* r2 <- source end address */
-
-copy_loop:
- ldmia r0!, {r10-r11} /* copy from source address [r0] */
- stmia r1!, {r10-r11} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- blo copy_loop
-
-#ifndef CONFIG_SPL_BUILD
- /*
- * fix .rel.dyn relocations
- */
- ldr r0, _TEXT_BASE /* r0 <- Text base */
- ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
- add r10, r10, r0 /* r10 <- sym table in FLASH */
- ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
- add r2, r2, r0 /* r2 <- rel dyn start in FLASH */
- ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
- add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
-fixloop:
- ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
- add r0, r0, r9 /* r0 <- location to fix up in RAM */
- ldr r1, [r2, #4]
- and r7, r1, #0xff
- cmp r7, #23 /* relative fixup? */
- beq fixrel
- cmp r7, #2 /* absolute fixup? */
- beq fixabs
- /* ignore unknown type of fixup */
- b fixnext
-fixabs:
- /* absolute fix: set location to (offset) symbol value */
- mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
- add r1, r10, r1 /* r1 <- address of symbol in table */
- ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r1, r9 /* r1 <- relocated sym addr */
- b fixnext
-fixrel:
- /* relative fix: increase location by offset */
- ldr r1, [r0]
- add r1, r1, r9
-fixnext:
- str r1, [r0]
- add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
- cmp r2, r3
- blo fixloop
-#endif
-
-relocate_done:
-
- bx lr
-
-_rel_dyn_start_ofs:
- .word __rel_dyn_start - _start
-_rel_dyn_end_ofs:
- .word __rel_dyn_end - _start
-_dynsym_start_ofs:
- .word __dynsym_start - _start
-
.globl c_runtime_cpu_setup
c_runtime_cpu_setup:
diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c
index 885fb2d..b935a29 100644
--- a/arch/arm/cpu/armv7/am33xx/board.c
+++ b/arch/arm/cpu/armv7/am33xx/board.c
@@ -149,3 +149,43 @@
#endif
return 0;
}
+
+#ifdef CONFIG_SPL_BUILD
+void rtc32k_enable(void)
+{
+ struct rtc_regs *rtc = (struct rtc_regs *)RTC_BASE;
+
+ /*
+ * Unlock the RTC's registers. For more details please see the
+ * RTC_SS section of the TRM. In order to unlock we need to
+ * write these specific values (keys) in this order.
+ */
+ writel(0x83e70b13, &rtc->kick0r);
+ writel(0x95a4f1e0, &rtc->kick1r);
+
+ /* Enable the RTC 32K OSC by setting bits 3 and 6. */
+ writel((1 << 3) | (1 << 6), &rtc->osc);
+}
+
+#define UART_RESET (0x1 << 1)
+#define UART_CLK_RUNNING_MASK 0x1
+#define UART_SMART_IDLE_EN (0x1 << 0x3)
+
+void uart_soft_reset(void)
+{
+ struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE;
+ u32 regval;
+
+ regval = readl(&uart_base->uartsyscfg);
+ regval |= UART_RESET;
+ writel(regval, &uart_base->uartsyscfg);
+ while ((readl(&uart_base->uartsyssts) &
+ UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK)
+ ;
+
+ /* Disable smart idle */
+ regval = readl(&uart_base->uartsyscfg);
+ regval |= UART_SMART_IDLE_EN;
+ writel(regval, &uart_base->uartsyscfg);
+}
+#endif
diff --git a/arch/arm/cpu/armv7/am33xx/clock_am33xx.c b/arch/arm/cpu/armv7/am33xx/clock_am33xx.c
index a1efc75..9c4d0b4 100644
--- a/arch/arm/cpu/armv7/am33xx/clock_am33xx.c
+++ b/arch/arm/cpu/armv7/am33xx/clock_am33xx.c
@@ -246,7 +246,7 @@
;
}
-static void mpu_pll_config(void)
+void mpu_pll_config_val(int mpull_m)
{
u32 clkmode, clksel, div_m2;
@@ -260,7 +260,7 @@
;
clksel = clksel & (~CLK_SEL_MASK);
- clksel = clksel | ((MPUPLL_M << CLK_SEL_SHIFT) | MPUPLL_N);
+ clksel = clksel | ((mpull_m << CLK_SEL_SHIFT) | MPUPLL_N);
writel(clksel, &cmwkup->clkseldpllmpu);
div_m2 = div_m2 & ~CLK_DIV_MASK;
@@ -274,6 +274,11 @@
;
}
+static void mpu_pll_config(void)
+{
+ mpu_pll_config_val(CONFIG_SYS_MPUCLK);
+}
+
static void core_pll_config(void)
{
u32 clkmode, clksel, div_m4, div_m5, div_m6;
diff --git a/board/alaska/Makefile b/arch/arm/cpu/armv7/at91/Makefile
similarity index 72%
copy from board/alaska/Makefile
copy to arch/arm/cpu/armv7/at91/Makefile
index a21f851..040c67d 100644
--- a/board/alaska/Makefile
+++ b/arch/arm/cpu/armv7/at91/Makefile
@@ -1,7 +1,10 @@
#
-# (C) Copyright 2003-2006
+# (C) Copyright 2000-2008
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
+# (C) Copyright 2013
+# Bo Shen <voice.shen@atmel.com>
+#
# See file CREDITS for list of people who contributed to this
# project.
#
@@ -12,7 +15,7 @@
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
@@ -23,13 +26,18 @@
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).o
+LIB = $(obj)lib$(SOC).o
-COBJS := $(BOARD).o flash.o
+COBJS-$(CONFIG_SAMA5D3) += sama5d3_devices.o
+COBJS-y += clock.o
+COBJS-y += cpu.o
+COBJS-y += reset.o
+COBJS-y += timer.o
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
+SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
+
+all: $(obj).depend $(LIB)
$(LIB): $(OBJS)
$(call cmd_link_o_target, $(OBJS))
diff --git a/arch/arm/cpu/armv7/at91/clock.c b/arch/arm/cpu/armv7/at91/clock.c
new file mode 100644
index 0000000..624b52c
--- /dev/null
+++ b/arch/arm/cpu/armv7/at91/clock.c
@@ -0,0 +1,125 @@
+/*
+ * [origin: Linux kernel linux/arch/arm/mach-at91/clock.c]
+ *
+ * Copyright (C) 2005 David Brownell
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ * Copyright (C) 2013 Bo Shen <voice.shen@atmel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/clk.h>
+
+#if !defined(CONFIG_AT91FAMILY)
+# error You need to define CONFIG_AT91FAMILY in your board config!
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static unsigned long at91_css_to_rate(unsigned long css)
+{
+ switch (css) {
+ case AT91_PMC_MCKR_CSS_SLOW:
+ return CONFIG_SYS_AT91_SLOW_CLOCK;
+ case AT91_PMC_MCKR_CSS_MAIN:
+ return gd->arch.main_clk_rate_hz;
+ case AT91_PMC_MCKR_CSS_PLLA:
+ return gd->arch.plla_rate_hz;
+ }
+
+ return 0;
+}
+
+static u32 at91_pll_rate(u32 freq, u32 reg)
+{
+ unsigned mul, div;
+
+ div = reg & 0xff;
+ mul = (reg >> 18) & 0x7f;
+ if (div && mul) {
+ freq /= div;
+ freq *= mul + 1;
+ } else {
+ freq = 0;
+ }
+
+ return freq;
+}
+
+int at91_clock_init(unsigned long main_clock)
+{
+ unsigned freq, mckr;
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+#ifndef CONFIG_SYS_AT91_MAIN_CLOCK
+ unsigned tmp;
+ /*
+ * When the bootloader initialized the main oscillator correctly,
+ * there's no problem using the cycle counter. But if it didn't,
+ * or when using oscillator bypass mode, we must be told the speed
+ * of the main clock.
+ */
+ if (!main_clock) {
+ do {
+ tmp = readl(&pmc->mcfr);
+ } while (!(tmp & AT91_PMC_MCFR_MAINRDY));
+ tmp &= AT91_PMC_MCFR_MAINF_MASK;
+ main_clock = tmp * (CONFIG_SYS_AT91_SLOW_CLOCK / 16);
+ }
+#endif
+ gd->arch.main_clk_rate_hz = main_clock;
+
+ /* report if PLLA is more than mildly overclocked */
+ gd->arch.plla_rate_hz = at91_pll_rate(main_clock, readl(&pmc->pllar));
+
+ /*
+ * MCK and CPU derive from one of those primary clocks.
+ * For now, assume this parentage won't change.
+ */
+ mckr = readl(&pmc->mckr);
+
+ /* plla divisor by 2 */
+ if (mckr & (1 << 12))
+ gd->arch.plla_rate_hz >>= 1;
+
+ gd->arch.mck_rate_hz = at91_css_to_rate(mckr & AT91_PMC_MCKR_CSS_MASK);
+ freq = gd->arch.mck_rate_hz;
+
+ /* prescale */
+ freq >>= mckr & AT91_PMC_MCKR_PRES_MASK;
+
+ switch (mckr & AT91_PMC_MCKR_MDIV_MASK) {
+ case AT91_PMC_MCKR_MDIV_2:
+ gd->arch.mck_rate_hz = freq / 2;
+ break;
+ case AT91_PMC_MCKR_MDIV_3:
+ gd->arch.mck_rate_hz = freq / 3;
+ break;
+ case AT91_PMC_MCKR_MDIV_4:
+ gd->arch.mck_rate_hz = freq / 4;
+ break;
+ default:
+ break;
+ }
+
+ gd->arch.cpu_clk_rate_hz = freq;
+
+ return 0;
+}
+
+void at91_periph_clk_enable(int id)
+{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+ if (id > 31)
+ writel(1 << (id - 32), &pmc->pcer1);
+ else
+ writel(1 << id, &pmc->pcer);
+}
diff --git a/arch/arm/cpu/armv7/at91/cpu.c b/arch/arm/cpu/armv7/at91/cpu.c
new file mode 100644
index 0000000..3df6143
--- /dev/null
+++ b/arch/arm/cpu/armv7/at91/cpu.c
@@ -0,0 +1,90 @@
+/*
+ * (C) Copyright 2010
+ * Reinhard Meyer, reinhard.meyer@emk-elektronik.de
+ * (C) Copyright 2009
+ * Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ * (C) Copyright 2013
+ * Bo Shen <voice.shen@atmel.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/at91_dbu.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_pit.h>
+#include <asm/arch/at91_gpbr.h>
+#include <asm/arch/clk.h>
+
+#ifndef CONFIG_SYS_AT91_MAIN_CLOCK
+#define CONFIG_SYS_AT91_MAIN_CLOCK 0
+#endif
+
+int arch_cpu_init(void)
+{
+ return at91_clock_init(CONFIG_SYS_AT91_MAIN_CLOCK);
+}
+
+void arch_preboot_os(void)
+{
+ ulong cpiv;
+ at91_pit_t *pit = (at91_pit_t *)ATMEL_BASE_PIT;
+
+ cpiv = AT91_PIT_MR_PIV_MASK(readl(&pit->piir));
+
+ /*
+ * Disable PITC
+ * Add 0x1000 to current counter to stop it faster
+ * without waiting for wrapping back to 0
+ */
+ writel(cpiv + 0x1000, &pit->mr);
+}
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+int print_cpuinfo(void)
+{
+ char buf[32];
+
+ printf("CPU: %s\n", get_cpu_name());
+ printf("Crystal frequency: %8s MHz\n",
+ strmhz(buf, get_main_clk_rate()));
+ printf("CPU clock : %8s MHz\n",
+ strmhz(buf, get_cpu_clk_rate()));
+ printf("Master clock : %8s MHz\n",
+ strmhz(buf, get_mck_clk_rate()));
+
+ return 0;
+}
+#endif
+
+void enable_caches(void)
+{
+}
+
+unsigned int get_chip_id(void)
+{
+ return readl(ATMEL_BASE_DBGU + AT91_DBU_CIDR) & ~AT91_DBU_CIDR_MASK;
+}
+
+unsigned int get_extension_chip_id(void)
+{
+ return readl(ATMEL_BASE_DBGU + AT91_DBU_EXID);
+}
diff --git a/arch/arm/cpu/armv7/at91/reset.c b/arch/arm/cpu/armv7/at91/reset.c
new file mode 100644
index 0000000..b9f83d9
--- /dev/null
+++ b/arch/arm/cpu/armv7/at91/reset.c
@@ -0,0 +1,47 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian@popies.net>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * (C) Copyright 2013
+ * Bo Shen <voice.shen@atmel.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/at91_rstc.h>
+
+/* Reset the cpu by telling the reset controller to do so */
+void reset_cpu(ulong ignored)
+{
+ at91_rstc_t *rstc = (at91_rstc_t *)ATMEL_BASE_RSTC;
+
+ writel(AT91_RSTC_KEY
+ | AT91_RSTC_CR_PROCRST /* Processor Reset */
+ | AT91_RSTC_CR_PERRST /* Peripheral Reset */
+#ifdef CONFIG_AT91RESET_EXTRST
+ | AT91_RSTC_CR_EXTRST /* External Reset (assert nRST pin) */
+#endif
+ , &rstc->cr);
+ /* never reached */
+ do { } while (1);
+}
diff --git a/arch/arm/cpu/armv7/at91/sama5d3_devices.c b/arch/arm/cpu/armv7/at91/sama5d3_devices.c
new file mode 100644
index 0000000..acf8b43
--- /dev/null
+++ b/arch/arm/cpu/armv7/at91/sama5d3_devices.c
@@ -0,0 +1,196 @@
+/*
+ * Copyright (C) 2012-2013 Atmel Corporation
+ * Bo Shen <voice.shen@atmel.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/sama5d3.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/gpio.h>
+#include <asm/io.h>
+
+unsigned int has_emac()
+{
+ return cpu_is_sama5d31() || cpu_is_sama5d35();
+}
+
+unsigned int has_gmac()
+{
+ return !cpu_is_sama5d31();
+}
+
+unsigned int has_lcdc()
+{
+ return !cpu_is_sama5d35();
+}
+
+char *get_cpu_name()
+{
+ unsigned int extension_id = get_extension_chip_id();
+
+ if (cpu_is_sama5d3())
+ switch (extension_id) {
+ case ARCH_EXID_SAMA5D31:
+ return "SAMA5D31";
+ case ARCH_EXID_SAMA5D33:
+ return "SAMA5D33";
+ case ARCH_EXID_SAMA5D34:
+ return "SAMA5D34";
+ case ARCH_EXID_SAMA5D35:
+ return "SAMA5D35";
+ default:
+ return "Unknown CPU type";
+ }
+ else
+ return "Unknown CPU type";
+}
+
+void at91_serial0_hw_init(void)
+{
+ at91_set_a_periph(AT91_PIO_PORTD, 18, 1); /* TXD0 */
+ at91_set_a_periph(AT91_PIO_PORTD, 17, 0); /* RXD0 */
+
+ /* Enable clock */
+ at91_periph_clk_enable(ATMEL_ID_USART0);
+}
+
+void at91_serial1_hw_init(void)
+{
+ at91_set_a_periph(AT91_PIO_PORTB, 29, 1); /* TXD1 */
+ at91_set_a_periph(AT91_PIO_PORTB, 28, 0); /* RXD1 */
+
+ /* Enable clock */
+ at91_periph_clk_enable(ATMEL_ID_USART1);
+}
+
+void at91_serial2_hw_init(void)
+{
+ at91_set_b_periph(AT91_PIO_PORTE, 26, 1); /* TXD2 */
+ at91_set_b_periph(AT91_PIO_PORTE, 25, 0); /* RXD2 */
+
+ /* Enable clock */
+ at91_periph_clk_enable(ATMEL_ID_USART2);
+}
+
+void at91_seriald_hw_init(void)
+{
+ at91_set_a_periph(AT91_PIO_PORTB, 31, 1); /* DTXD */
+ at91_set_a_periph(AT91_PIO_PORTB, 30, 0); /* DRXD */
+
+ /* Enable clock */
+ at91_periph_clk_enable(ATMEL_ID_SYS);
+}
+
+#if defined(CONFIG_ATMEL_SPI)
+void at91_spi0_hw_init(unsigned long cs_mask)
+{
+ at91_set_a_periph(AT91_PIO_PORTD, 10, 0); /* SPI0_MISO */
+ at91_set_a_periph(AT91_PIO_PORTD, 11, 0); /* SPI0_MOSI */
+ at91_set_a_periph(AT91_PIO_PORTD, 12, 0); /* SPI0_SPCK */
+
+ if (cs_mask & (1 << 0))
+ at91_set_pio_output(AT91_PIO_PORTD, 13, 1);
+ if (cs_mask & (1 << 1))
+ at91_set_pio_output(AT91_PIO_PORTD, 14, 1);
+ if (cs_mask & (1 << 2))
+ at91_set_pio_output(AT91_PIO_PORTD, 15, 1);
+ if (cs_mask & (1 << 3))
+ at91_set_pio_output(AT91_PIO_PORTD, 16, 1);
+
+ /* Enable clock */
+ at91_periph_clk_enable(ATMEL_ID_SPI0);
+}
+#endif
+
+#ifdef CONFIG_GENERIC_ATMEL_MCI
+void at91_mci_hw_init(void)
+{
+ at91_set_a_periph(AT91_PIO_PORTD, 0, 0); /* MCI0 CMD */
+ at91_set_a_periph(AT91_PIO_PORTD, 1, 0); /* MCI0 DA0 */
+ at91_set_a_periph(AT91_PIO_PORTD, 2, 0); /* MCI0 DA1 */
+ at91_set_a_periph(AT91_PIO_PORTD, 3, 0); /* MCI0 DA2 */
+ at91_set_a_periph(AT91_PIO_PORTD, 4, 0); /* MCI0 DA3 */
+#ifdef CONFIG_ATMEL_MCI_8BIT
+ at91_set_a_periph(AT91_PIO_PORTD, 5, 0); /* MCI0 DA4 */
+ at91_set_a_periph(AT91_PIO_PORTD, 6, 0); /* MCI0 DA5 */
+ at91_set_a_periph(AT91_PIO_PORTD, 7, 0); /* MCI0 DA6 */
+ at91_set_a_periph(AT91_PIO_PORTD, 8, 0); /* MCI0 DA7 */
+#endif
+ at91_set_a_periph(AT91_PIO_PORTD, 9, 0); /* MCI0 CLK */
+
+ /* Enable clock */
+ at91_periph_clk_enable(ATMEL_ID_MCI0);
+}
+#endif
+
+#ifdef CONFIG_MACB
+void at91_macb_hw_init(void)
+{
+ at91_set_a_periph(AT91_PIO_PORTC, 7, 0); /* ETXCK_EREFCK */
+ at91_set_a_periph(AT91_PIO_PORTC, 5, 0); /* ERXDV */
+ at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* ERX0 */
+ at91_set_a_periph(AT91_PIO_PORTC, 3, 0); /* ERX1 */
+ at91_set_a_periph(AT91_PIO_PORTC, 6, 0); /* ERXER */
+ at91_set_a_periph(AT91_PIO_PORTC, 4, 0); /* ETXEN */
+ at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* ETX0 */
+ at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* ETX1 */
+ at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* EMDIO */
+ at91_set_a_periph(AT91_PIO_PORTC, 8, 0); /* EMDC */
+
+ /* Enable clock */
+ at91_periph_clk_enable(ATMEL_ID_EMAC);
+}
+#endif
+
+#ifdef CONFIG_LCD
+void at91_lcd_hw_init(void)
+{
+ at91_set_a_periph(AT91_PIO_PORTA, 24, 0); /* LCDPWM */
+ at91_set_a_periph(AT91_PIO_PORTA, 25, 0); /* LCDDISP */
+ at91_set_a_periph(AT91_PIO_PORTA, 26, 0); /* LCDVSYNC */
+ at91_set_a_periph(AT91_PIO_PORTA, 27, 0); /* LCDHSYNC */
+ at91_set_a_periph(AT91_PIO_PORTA, 28, 0); /* LCDDOTCK */
+ at91_set_a_periph(AT91_PIO_PORTA, 29, 0); /* LCDDEN */
+
+ /* The lower 16-bit of LCD only available on Port A */
+ at91_set_a_periph(AT91_PIO_PORTA, 0, 0); /* LCDD0 */
+ at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* LCDD1 */
+ at91_set_a_periph(AT91_PIO_PORTA, 2, 0); /* LCDD2 */
+ at91_set_a_periph(AT91_PIO_PORTA, 3, 0); /* LCDD3 */
+ at91_set_a_periph(AT91_PIO_PORTA, 4, 0); /* LCDD4 */
+ at91_set_a_periph(AT91_PIO_PORTA, 5, 0); /* LCDD5 */
+ at91_set_a_periph(AT91_PIO_PORTA, 6, 0); /* LCDD6 */
+ at91_set_a_periph(AT91_PIO_PORTA, 7, 0); /* LCDD7 */
+ at91_set_a_periph(AT91_PIO_PORTA, 8, 0); /* LCDD8 */
+ at91_set_a_periph(AT91_PIO_PORTA, 9, 0); /* LCDD9 */
+ at91_set_a_periph(AT91_PIO_PORTA, 10, 0); /* LCDD10 */
+ at91_set_a_periph(AT91_PIO_PORTA, 11, 0); /* LCDD11 */
+ at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* LCDD12 */
+ at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* LCDD13 */
+ at91_set_a_periph(AT91_PIO_PORTA, 14, 0); /* LCDD14 */
+ at91_set_a_periph(AT91_PIO_PORTA, 15, 0); /* LCDD15 */
+
+ /* Enable clock */
+ at91_periph_clk_enable(ATMEL_ID_LCDC);
+}
+#endif
diff --git a/arch/arm/cpu/armv7/at91/timer.c b/arch/arm/cpu/armv7/at91/timer.c
new file mode 100644
index 0000000..b3a450f
--- /dev/null
+++ b/arch/arm/cpu/armv7/at91/timer.c
@@ -0,0 +1,139 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian@popies.net>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * (C) Copyright 2013
+ * Bo Shen <voice.shen@atmel.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/at91_pit.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/clk.h>
+#include <div64.h>
+
+#if !defined(CONFIG_AT91FAMILY)
+# error You need to define CONFIG_AT91FAMILY in your board config!
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * We're using the SAMA5D3x PITC in 32 bit mode, by
+ * setting the 20 bit counter period to its maximum (0xfffff).
+ * (See the relevant data sheets to understand that this really works)
+ *
+ * We do also mimic the typical powerpc way of incrementing
+ * two 32 bit registers called tbl and tbu.
+ *
+ * Those registers increment at 1/16 the main clock rate.
+ */
+
+#define TIMER_LOAD_VAL 0xfffff
+
+static inline unsigned long long tick_to_time(unsigned long long tick)
+{
+ tick *= CONFIG_SYS_HZ;
+ do_div(tick, gd->arch.timer_rate_hz);
+
+ return tick;
+}
+
+static inline unsigned long long usec_to_tick(unsigned long long usec)
+{
+ usec *= gd->arch.timer_rate_hz;
+ do_div(usec, 1000000);
+
+ return usec;
+}
+
+/*
+ * Use the PITC in full 32 bit incrementing mode
+ */
+int timer_init(void)
+{
+ at91_pit_t *pit = (at91_pit_t *)ATMEL_BASE_PIT;
+
+ /* Enable PITC Clock */
+ at91_periph_clk_enable(ATMEL_ID_SYS);
+
+ /* Enable PITC */
+ writel(TIMER_LOAD_VAL | AT91_PIT_MR_EN , &pit->mr);
+
+ gd->arch.timer_rate_hz = gd->arch.mck_rate_hz / 16;
+ gd->arch.tbu = 0;
+ gd->arch.tbl = 0;
+
+ return 0;
+}
+
+/*
+ * Get the current 64 bit timer tick count
+ */
+unsigned long long get_ticks(void)
+{
+ at91_pit_t *pit = (at91_pit_t *)ATMEL_BASE_PIT;
+
+ ulong now = readl(&pit->piir);
+
+ /* increment tbu if tbl has rolled over */
+ if (now < gd->arch.tbl)
+ gd->arch.tbu++;
+ gd->arch.tbl = now;
+ return (((unsigned long long)gd->arch.tbu) << 32) | gd->arch.tbl;
+}
+
+void __udelay(unsigned long usec)
+{
+ unsigned long long start;
+ ulong tmo;
+
+ start = get_ticks(); /* get current timestamp */
+ tmo = usec_to_tick(usec); /* convert usecs to ticks */
+ while ((get_ticks() - start) < tmo)
+ ; /* loop till time has passed */
+}
+
+/*
+ * get_timer(base) can be used to check for timeouts or
+ * to measure elasped time relative to an event:
+ *
+ * ulong start_time = get_timer(0) sets start_time to the current
+ * time value.
+ * get_timer(start_time) returns the time elapsed since then.
+ *
+ * The time is used in CONFIG_SYS_HZ units!
+ */
+ulong get_timer(ulong base)
+{
+ return tick_to_time(get_ticks()) - base;
+}
+
+/*
+ * Return the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+ return gd->arch.timer_rate_hz;
+}
diff --git a/arch/arm/cpu/armv7/exynos/Makefile b/arch/arm/cpu/armv7/exynos/Makefile
index 9119961..4661155 100644
--- a/arch/arm/cpu/armv7/exynos/Makefile
+++ b/arch/arm/cpu/armv7/exynos/Makefile
@@ -22,10 +22,19 @@
LIB = $(obj)lib$(SOC).o
-COBJS += clock.o power.o soc.o system.o pinmux.o
+COBJS-y += clock.o power.o soc.o system.o pinmux.o tzpc.o
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
+ifdef CONFIG_SPL_BUILD
+COBJS-$(CONFIG_EXYNOS5) += clock_init_exynos5.o
+COBJS-$(CONFIG_EXYNOS5) += dmc_common.o dmc_init_ddr3.o
+COBJS-$(CONFIG_EXYNOS4210)+= dmc_init_exynos4.o clock_init_exynos4.o
+COBJS-y += spl_boot.o
+COBJS-y += lowlevel_init.o
+endif
+
+COBJS := $(COBJS-y)
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
all: $(obj).depend $(LIB)
diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c
index 223660a..9f07181 100644
--- a/arch/arm/cpu/armv7/exynos/clock.c
+++ b/arch/arm/cpu/armv7/exynos/clock.c
@@ -27,6 +27,10 @@
#include <asm/arch/clk.h>
#include <asm/arch/periph.h>
+#define PLL_DIV_1024 1024
+#define PLL_DIV_65535 65535
+#define PLL_DIV_65536 65536
+
/* *
* This structure is to store the src bit, div bit and prediv bit
* positions of the peripheral clocks of the src and div registers
@@ -85,6 +89,7 @@
static int exynos_get_pll_clk(int pllreg, unsigned int r, unsigned int k)
{
unsigned long m, p, s = 0, mask, fout;
+ unsigned int div;
unsigned int freq;
/*
* APLL_CON: MIDV [25:16]
@@ -110,16 +115,42 @@
if (pllreg == EPLL) {
k = k & 0xffff;
/* FOUT = (MDIV + K / 65536) * FIN / (PDIV * 2^SDIV) */
- fout = (m + k / 65536) * (freq / (p * (1 << s)));
+ fout = (m + k / PLL_DIV_65536) * (freq / (p * (1 << s)));
} else if (pllreg == VPLL) {
k = k & 0xfff;
- /* FOUT = (MDIV + K / 1024) * FIN / (PDIV * 2^SDIV) */
- fout = (m + k / 1024) * (freq / (p * (1 << s)));
+
+ /*
+ * Exynos4210
+ * FOUT = (MDIV + K / 1024) * FIN / (PDIV * 2^SDIV)
+ *
+ * Exynos4412
+ * FOUT = (MDIV + K / 65535) * FIN / (PDIV * 2^SDIV)
+ *
+ * Exynos5250
+ * FOUT = (MDIV + K / 65536) * FIN / (PDIV * 2^SDIV)
+ */
+ if (proid_is_exynos4210())
+ div = PLL_DIV_1024;
+ else if (proid_is_exynos4412())
+ div = PLL_DIV_65535;
+ else if (proid_is_exynos5250())
+ div = PLL_DIV_65536;
+ else
+ return 0;
+
+ fout = (m + k / div) * (freq / (p * (1 << s)));
} else {
- if (s < 1)
- s = 1;
- /* FOUT = MDIV * FIN / (PDIV * 2^(SDIV - 1)) */
- fout = m * (freq / (p * (1 << (s - 1))));
+ /*
+ * Exynos4210
+ * FOUT = MDIV * FIN / (PDIV * 2^SDIV)
+ *
+ * Exynos4412 / Exynos5250
+ * FOUT = MDIV * FIN / (PDIV * 2^(SDIV-1))
+ */
+ if (proid_is_exynos4210())
+ fout = m * (freq / (p * (1 << s)));
+ else
+ fout = m * (freq / (p * (1 << (s - 1))));
}
return fout;
@@ -613,7 +644,7 @@
(struct exynos4_clock *)samsung_get_base_clock();
unsigned long uclk, sclk;
unsigned int sel, ratio, pre_ratio;
- int shift;
+ int shift = 0;
sel = readl(&clk->src_fsys);
sel = (sel >> (dev_index << 2)) & 0xf;
@@ -662,7 +693,7 @@
(struct exynos5_clock *)samsung_get_base_clock();
unsigned long uclk, sclk;
unsigned int sel, ratio, pre_ratio;
- int shift;
+ int shift = 0;
sel = readl(&clk->src_fsys);
sel = (sel >> (dev_index << 2)) & 0xf;
diff --git a/board/samsung/smdk5250/clock_init.h b/arch/arm/cpu/armv7/exynos/clock_init.h
similarity index 97%
rename from board/samsung/smdk5250/clock_init.h
rename to arch/arm/cpu/armv7/exynos/clock_init.h
index f751bcb..20a1d47 100644
--- a/board/samsung/smdk5250/clock_init.h
+++ b/arch/arm/cpu/armv7/exynos/clock_init.h
@@ -146,4 +146,9 @@
* Initialize clock for the device
*/
void system_clock_init(void);
+
+/*
+ * Set clock divisor value for booting from EMMC.
+ */
+void emmc_boot_clk_div_set(void);
#endif
diff --git a/arch/arm/cpu/armv7/exynos/clock_init_exynos4.c b/arch/arm/cpu/armv7/exynos/clock_init_exynos4.c
new file mode 100644
index 0000000..3161090
--- /dev/null
+++ b/arch/arm/cpu/armv7/exynos/clock_init_exynos4.c
@@ -0,0 +1,95 @@
+/*
+ * Clock Initialization for board based on EXYNOS4210
+ *
+ * Copyright (C) 2013 Samsung Electronics
+ * Rajeshwari Shinde <rajeshwari.s@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <config.h>
+#include <version.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/clock.h>
+#include "common_setup.h"
+#include "exynos4_setup.h"
+
+/*
+ * system_clock_init: Initialize core clock and bus clock.
+ * void system_clock_init(void)
+ */
+void system_clock_init(void)
+{
+ struct exynos4_clock *clk =
+ (struct exynos4_clock *)samsung_get_base_clock();
+
+ writel(CLK_SRC_CPU_VAL, &clk->src_cpu);
+
+ sdelay(0x10000);
+
+ writel(CLK_SRC_TOP0_VAL, &clk->src_top0);
+ writel(CLK_SRC_TOP1_VAL, &clk->src_top1);
+ writel(CLK_SRC_DMC_VAL, &clk->src_dmc);
+ writel(CLK_SRC_LEFTBUS_VAL, &clk->src_leftbus);
+ writel(CLK_SRC_RIGHTBUS_VAL, &clk->src_rightbus);
+ writel(CLK_SRC_FSYS_VAL, &clk->src_fsys);
+ writel(CLK_SRC_PERIL0_VAL, &clk->src_peril0);
+ writel(CLK_SRC_CAM_VAL, &clk->src_cam);
+ writel(CLK_SRC_MFC_VAL, &clk->src_mfc);
+ writel(CLK_SRC_G3D_VAL, &clk->src_g3d);
+ writel(CLK_SRC_LCD0_VAL, &clk->src_lcd0);
+
+ sdelay(0x10000);
+
+ writel(CLK_DIV_CPU0_VAL, &clk->div_cpu0);
+ writel(CLK_DIV_CPU1_VAL, &clk->div_cpu1);
+ writel(CLK_DIV_DMC0_VAL, &clk->div_dmc0);
+ writel(CLK_DIV_DMC1_VAL, &clk->div_dmc1);
+ writel(CLK_DIV_LEFTBUS_VAL, &clk->div_leftbus);
+ writel(CLK_DIV_RIGHTBUS_VAL, &clk->div_rightbus);
+ writel(CLK_DIV_TOP_VAL, &clk->div_top);
+ writel(CLK_DIV_FSYS1_VAL, &clk->div_fsys1);
+ writel(CLK_DIV_FSYS2_VAL, &clk->div_fsys2);
+ writel(CLK_DIV_FSYS3_VAL, &clk->div_fsys3);
+ writel(CLK_DIV_PERIL0_VAL, &clk->div_peril0);
+ writel(CLK_DIV_CAM_VAL, &clk->div_cam);
+ writel(CLK_DIV_MFC_VAL, &clk->div_mfc);
+ writel(CLK_DIV_G3D_VAL, &clk->div_g3d);
+ writel(CLK_DIV_LCD0_VAL, &clk->div_lcd0);
+
+ /* Set PLL locktime */
+ writel(PLL_LOCKTIME, &clk->apll_lock);
+ writel(PLL_LOCKTIME, &clk->mpll_lock);
+ writel(PLL_LOCKTIME, &clk->epll_lock);
+ writel(PLL_LOCKTIME, &clk->vpll_lock);
+
+ writel(APLL_CON1_VAL, &clk->apll_con1);
+ writel(APLL_CON0_VAL, &clk->apll_con0);
+ writel(MPLL_CON1_VAL, &clk->mpll_con1);
+ writel(MPLL_CON0_VAL, &clk->mpll_con0);
+ writel(EPLL_CON1_VAL, &clk->epll_con1);
+ writel(EPLL_CON0_VAL, &clk->epll_con0);
+ writel(VPLL_CON1_VAL, &clk->vpll_con1);
+ writel(VPLL_CON0_VAL, &clk->vpll_con0);
+
+ sdelay(0x30000);
+}
diff --git a/board/samsung/smdk5250/clock_init.c b/arch/arm/cpu/armv7/exynos/clock_init_exynos5.c
similarity index 90%
rename from board/samsung/smdk5250/clock_init.c
rename to arch/arm/cpu/armv7/exynos/clock_init_exynos5.c
index 5b9e82f..0f9c572 100644
--- a/board/samsung/smdk5250/clock_init.c
+++ b/arch/arm/cpu/armv7/exynos/clock_init_exynos5.c
@@ -28,9 +28,14 @@
#include <asm/arch/clk.h>
#include <asm/arch/clock.h>
#include <asm/arch/spl.h>
+#include <asm/arch/dwmmc.h>
#include "clock_init.h"
-#include "setup.h"
+#include "common_setup.h"
+#include "exynos5_setup.h"
+
+#define FSYS1_MMC0_DIV_MASK 0xff0f
+#define FSYS1_MMC0_DIV_VAL 0x0701
DECLARE_GLOBAL_DATA_PTR;
@@ -210,10 +215,10 @@
DMC_MEMCONTROL_BL_8 |
DMC_MEMCONTROL_PZQ_DISABLE |
DMC_MEMCONTROL_MRR_BYTE_7_0,
- .memconfig = DMC_MEMCONFIGx_CHIP_MAP_INTERLEAVED |
- DMC_MEMCONFIGx_CHIP_COL_10 |
- DMC_MEMCONFIGx_CHIP_ROW_15 |
- DMC_MEMCONFIGx_CHIP_BANK_8,
+ .memconfig = DMC_MEMCONFIGX_CHIP_MAP_INTERLEAVED |
+ DMC_MEMCONFIGX_CHIP_COL_10 |
+ DMC_MEMCONFIGX_CHIP_ROW_15 |
+ DMC_MEMCONFIGX_CHIP_BANK_8,
.membaseconfig0 = DMC_MEMBASECONFIG_VAL(0x40),
.membaseconfig1 = DMC_MEMBASECONFIG_VAL(0x80),
.prechconfig_tp_cnt = 0xff,
@@ -313,10 +318,10 @@
DMC_MEMCONTROL_BL_8 |
DMC_MEMCONTROL_PZQ_DISABLE |
DMC_MEMCONTROL_MRR_BYTE_7_0,
- .memconfig = DMC_MEMCONFIGx_CHIP_MAP_INTERLEAVED |
- DMC_MEMCONFIGx_CHIP_COL_10 |
- DMC_MEMCONFIGx_CHIP_ROW_15 |
- DMC_MEMCONFIGx_CHIP_BANK_8,
+ .memconfig = DMC_MEMCONFIGX_CHIP_MAP_INTERLEAVED |
+ DMC_MEMCONFIGX_CHIP_COL_10 |
+ DMC_MEMCONFIGX_CHIP_ROW_15 |
+ DMC_MEMCONFIGX_CHIP_BANK_8,
.membaseconfig0 = DMC_MEMBASECONFIG_VAL(0x40),
.membaseconfig1 = DMC_MEMBASECONFIG_VAL(0x80),
.prechconfig_tp_cnt = 0xff,
@@ -346,9 +351,8 @@
* @param frequency_mhz Returns memory speed in MHz
* @param arm_freq Returns ARM clock speed in MHz
* @param mem_manuf Return Memory Manufacturer name
- * @return 0 if all ok
*/
-static int clock_get_mem_selection(enum ddr_mode *mem_type,
+static void clock_get_mem_selection(enum ddr_mode *mem_type,
unsigned *frequency_mhz, unsigned *arm_freq,
enum mem_manuf *mem_manuf)
{
@@ -359,8 +363,6 @@
*frequency_mhz = params->frequency_mhz;
*arm_freq = params->arm_freq_mhz;
*mem_manuf = params->mem_manuf;
-
- return 0;
}
/* Get the ratios for setting ARM clock */
@@ -372,9 +374,9 @@
unsigned frequency_mhz, arm_freq;
int i;
- if (clock_get_mem_selection(&mem_type, &frequency_mhz,
- &arm_freq, &mem_manuf))
- ;
+ clock_get_mem_selection(&mem_type, &frequency_mhz,
+ &arm_freq, &mem_manuf);
+
for (i = 0, arm_ratio = arm_clk_ratios; i < ARRAY_SIZE(arm_clk_ratios);
i++, arm_ratio++) {
if (arm_ratio->arm_freq_mhz == arm_freq)
@@ -396,15 +398,14 @@
unsigned frequency_mhz, arm_freq;
int i;
- if (!clock_get_mem_selection(&mem_type, &frequency_mhz,
- &arm_freq, &mem_manuf)) {
- for (i = 0, mem = mem_timings; i < ARRAY_SIZE(mem_timings);
- i++, mem++) {
- if (mem->mem_type == mem_type &&
- mem->frequency_mhz == frequency_mhz &&
- mem->mem_manuf == mem_manuf)
- return mem;
- }
+ clock_get_mem_selection(&mem_type, &frequency_mhz,
+ &arm_freq, &mem_manuf);
+ for (i = 0, mem = mem_timings; i < ARRAY_SIZE(mem_timings);
+ i++, mem++) {
+ if (mem->mem_type == mem_type &&
+ mem->frequency_mhz == frequency_mhz &&
+ mem->mem_manuf == mem_manuf)
+ return mem;
}
/* will hang if failed to find memory timings */
@@ -416,7 +417,8 @@
void system_clock_init()
{
- struct exynos5_clock *clk = (struct exynos5_clock *)EXYNOS5_CLOCK_BASE;
+ struct exynos5_clock *clk =
+ (struct exynos5_clock *)samsung_get_base_clock();
struct mem_timings *mem;
struct arm_clk_ratios *arm_clk_ratio;
u32 val, tmp;
@@ -656,7 +658,8 @@
void clock_init_dp_clock(void)
{
- struct exynos5_clock *clk = (struct exynos5_clock *)EXYNOS5_CLOCK_BASE;
+ struct exynos5_clock *clk =
+ (struct exynos5_clock *)samsung_get_base_clock();
/* DP clock enable */
setbits_le32(&clk->gate_ip_disp1, CLK_GATE_DP1_ALLOW);
@@ -664,3 +667,18 @@
/* We run DP at 267 Mhz */
setbits_le32(&clk->div_disp1_0, CLK_DIV_DISP1_0_FIMD1);
}
+
+/*
+ * Set clock divisor value for booting from EMMC.
+ * Set DWMMC channel-0 clk div to operate mmc0 device at 50MHz.
+ */
+void emmc_boot_clk_div_set(void)
+{
+ struct exynos5_clock *clk =
+ (struct exynos5_clock *)samsung_get_base_clock();
+ unsigned int div_mmc;
+
+ div_mmc = readl((unsigned int) &clk->div_fsys1) & ~FSYS1_MMC0_DIV_MASK;
+ div_mmc |= FSYS1_MMC0_DIV_VAL;
+ writel(div_mmc, (unsigned int) &clk->div_fsys1);
+}
diff --git a/arch/x86/include/asm/init_wrappers.h b/arch/arm/cpu/armv7/exynos/common_setup.h
similarity index 60%
rename from arch/x86/include/asm/init_wrappers.h
rename to arch/arm/cpu/armv7/exynos/common_setup.h
index 899ffb1..e6318c0 100644
--- a/arch/x86/include/asm/init_wrappers.h
+++ b/arch/arm/cpu/armv7/exynos/common_setup.h
@@ -1,6 +1,8 @@
/*
- * (C) Copyright 2011
- * Graeme Russ, <graeme.russ@gmail.com>
+ * Common APIs for EXYNOS based board
+ *
+ * Copyright (C) 2013 Samsung Electronics
+ * Rajeshwari Shinde <rajeshwari.s@samsung.com>
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -21,22 +23,23 @@
* MA 02111-1307 USA
*/
-#ifndef _INIT_WRAPPERS_H_
-#define _INIT_WRAPPERS_H_
+#define DMC_OFFSET 0x10000
-int serial_initialize_r(void);
-int env_relocate_r(void);
-int pci_init_r(void);
-int jumptable_init_r(void);
-int pcmcia_init_r(void);
-int kgdb_init_r(void);
-int enable_interrupts_r(void);
-int eth_initialize_r(void);
-int reset_phy_r(void);
-int ide_init_r(void);
-int scsi_init_r(void);
-int doc_init_r(void);
-int bb_miiphy_init_r(void);
-int post_run_r(void);
+/*
+ * Memory initialization
+ *
+ * @param reset Reset PHY during initialization.
+ */
+void mem_ctrl_init(int reset);
-#endif /* !_INIT_WRAPPERS_H_ */
+ /* System Clock initialization */
+void system_clock_init(void);
+
+/*
+ * Init subsystems according to the reset status
+ *
+ * @return 0 for a normal boot, non-zero for a resume
+ */
+int do_lowlevel_init(void);
+
+void sdelay(unsigned long);
diff --git a/board/samsung/smdk5250/dmc_common.c b/arch/arm/cpu/armv7/exynos/dmc_common.c
similarity index 96%
rename from board/samsung/smdk5250/dmc_common.c
rename to arch/arm/cpu/armv7/exynos/dmc_common.c
index 109602a..645f57e 100644
--- a/board/samsung/smdk5250/dmc_common.c
+++ b/arch/arm/cpu/armv7/exynos/dmc_common.c
@@ -26,7 +26,8 @@
#include <asm/arch/spl.h>
#include "clock_init.h"
-#include "setup.h"
+#include "common_setup.h"
+#include "exynos5_setup.h"
#define ZQ_INIT_TIMEOUT 10000
@@ -175,7 +176,7 @@
writel(DMC_MEMBASECONFIG1_VAL, &dmc->membaseconfig1);
}
-void mem_ctrl_init()
+void mem_ctrl_init(int reset)
{
struct spl_machine_param *param = spl_get_machine_params();
struct mem_timings *mem;
@@ -185,7 +186,7 @@
/* If there are any other memory variant, add their init call below */
if (param->mem_type == DDR_MODE_DDR3) {
- ret = ddr3_mem_ctrl_init(mem, param->mem_iv_size);
+ ret = ddr3_mem_ctrl_init(mem, param->mem_iv_size, reset);
if (ret) {
/* will hang if failed to init memory control */
while (1)
diff --git a/board/samsung/smdk5250/dmc_init_ddr3.c b/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c
similarity index 92%
rename from board/samsung/smdk5250/dmc_init_ddr3.c
rename to arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c
index e050790..e03d74b 100644
--- a/board/samsung/smdk5250/dmc_init_ddr3.c
+++ b/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c
@@ -27,31 +27,36 @@
#include <asm/arch/clock.h>
#include <asm/arch/cpu.h>
#include <asm/arch/dmc.h>
-#include "setup.h"
+#include "common_setup.h"
+#include "exynos5_setup.h"
#include "clock_init.h"
#define RDLVL_COMPLETE_TIMEOUT 10000
static void reset_phy_ctrl(void)
{
- struct exynos5_clock *clk = (struct exynos5_clock *)EXYNOS5_CLOCK_BASE;
+ struct exynos5_clock *clk =
+ (struct exynos5_clock *)samsung_get_base_clock();
writel(DDR3PHY_CTRL_PHY_RESET_OFF, &clk->lpddr3phy_ctrl);
writel(DDR3PHY_CTRL_PHY_RESET, &clk->lpddr3phy_ctrl);
}
-int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size)
+int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
+ int reset)
{
unsigned int val;
struct exynos5_phy_control *phy0_ctrl, *phy1_ctrl;
struct exynos5_dmc *dmc;
int i;
- phy0_ctrl = (struct exynos5_phy_control *)EXYNOS5_DMC_PHY0_BASE;
- phy1_ctrl = (struct exynos5_phy_control *)EXYNOS5_DMC_PHY1_BASE;
- dmc = (struct exynos5_dmc *)EXYNOS5_DMC_CTRL_BASE;
+ phy0_ctrl = (struct exynos5_phy_control *)samsung_get_base_dmc_phy();
+ phy1_ctrl = (struct exynos5_phy_control *)(samsung_get_base_dmc_phy()
+ + DMC_OFFSET);
+ dmc = (struct exynos5_dmc *)samsung_get_base_dmc_ctrl();
- reset_phy_ctrl();
+ if (reset)
+ reset_phy_ctrl();
/* Set Impedance Output Driver */
val = (mem->impedance << CA_CK_DRVR_DS_OFFSET) |
@@ -100,14 +105,14 @@
/* Start DLL locking */
writel(val | (mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT),
- &phy0_ctrl->phy_con12);
+ &phy0_ctrl->phy_con12);
writel(val | (mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT),
- &phy1_ctrl->phy_con12);
+ &phy1_ctrl->phy_con12);
update_reset_dll(dmc, DDR_MODE_DDR3);
writel(mem->concontrol | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT),
- &dmc->concontrol);
+ &dmc->concontrol);
/* Memory Channel Inteleaving Size */
writel(mem->iv_size, &dmc->ivcontrol);
@@ -119,7 +124,7 @@
/* Precharge Configuration */
writel(mem->prechconfig_tp_cnt << PRECHCONFIG_TP_CNT_SHIFT,
- &dmc->prechconfig);
+ &dmc->prechconfig);
/* Power Down mode Configuration */
writel(mem->dpwrdn_cyc << PWRDNCONFIG_DPWRDN_CYC_SHIFT |
diff --git a/arch/arm/cpu/armv7/exynos/dmc_init_exynos4.c b/arch/arm/cpu/armv7/exynos/dmc_init_exynos4.c
new file mode 100644
index 0000000..ecddc72
--- /dev/null
+++ b/arch/arm/cpu/armv7/exynos/dmc_init_exynos4.c
@@ -0,0 +1,213 @@
+/*
+ * Memory setup for board based on EXYNOS4210
+ *
+ * Copyright (C) 2013 Samsung Electronics
+ * Rajeshwari Shinde <rajeshwari.s@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <asm/arch/dmc.h>
+#include "common_setup.h"
+#include "exynos4_setup.h"
+
+struct mem_timings mem = {
+ .direct_cmd_msr = {
+ DIRECT_CMD1, DIRECT_CMD2, DIRECT_CMD3, DIRECT_CMD4
+ },
+ .timingref = TIMINGREF_VAL,
+ .timingrow = TIMINGROW_VAL,
+ .timingdata = TIMINGDATA_VAL,
+ .timingpower = TIMINGPOWER_VAL,
+ .zqcontrol = ZQ_CONTROL_VAL,
+ .control0 = CONTROL0_VAL,
+ .control1 = CONTROL1_VAL,
+ .control2 = CONTROL2_VAL,
+ .concontrol = CONCONTROL_VAL,
+ .prechconfig = PRECHCONFIG,
+ .memcontrol = MEMCONTROL_VAL,
+ .memconfig0 = MEMCONFIG0_VAL,
+ .memconfig1 = MEMCONFIG1_VAL,
+ .dll_resync = FORCE_DLL_RESYNC,
+ .dll_on = DLL_CONTROL_ON,
+};
+static void phy_control_reset(int ctrl_no, struct exynos4_dmc *dmc)
+{
+ if (ctrl_no) {
+ writel((mem.control1 | (1 << mem.dll_resync)),
+ &dmc->phycontrol1);
+ writel((mem.control1 | (0 << mem.dll_resync)),
+ &dmc->phycontrol1);
+ } else {
+ writel((mem.control0 | (0 << mem.dll_on)),
+ &dmc->phycontrol0);
+ writel((mem.control0 | (1 << mem.dll_on)),
+ &dmc->phycontrol0);
+ }
+}
+
+static void dmc_config_mrs(struct exynos4_dmc *dmc, int chip)
+{
+ int i;
+ unsigned long mask = 0;
+
+ if (chip)
+ mask = DIRECT_CMD_CHIP1_SHIFT;
+
+ for (i = 0; i < MEM_TIMINGS_MSR_COUNT; i++) {
+ writel(mem.direct_cmd_msr[i] | mask,
+ &dmc->directcmd);
+ }
+}
+
+static void dmc_init(struct exynos4_dmc *dmc)
+{
+ /*
+ * DLL Parameter Setting:
+ * Termination: Enable R/W
+ * Phase Delay for DQS Cleaning: 180' Shift
+ */
+ writel(mem.control1, &dmc->phycontrol1);
+
+ /*
+ * ZQ Calibration
+ * Termination: Disable
+ * Auto Calibration Start: Enable
+ */
+ writel(mem.zqcontrol, &dmc->phyzqcontrol);
+ sdelay(0x100000);
+
+ /*
+ * Update DLL Information:
+ * Force DLL Resyncronization
+ */
+ phy_control_reset(1, dmc);
+ phy_control_reset(0, dmc);
+
+ /* Set DLL Parameters */
+ writel(mem.control1, &dmc->phycontrol1);
+
+ /* DLL Start */
+ writel((mem.control0 | CTRL_START | CTRL_DLL_ON), &dmc->phycontrol0);
+
+ writel(mem.control2, &dmc->phycontrol2);
+
+ /* Set Clock Ratio of Bus clock to Memory Clock */
+ writel(mem.concontrol, &dmc->concontrol);
+
+ /*
+ * Memor Burst length: 8
+ * Number of chips: 2
+ * Memory Bus width: 32 bit
+ * Memory Type: DDR3
+ * Additional Latancy for PLL: 1 Cycle
+ */
+ writel(mem.memcontrol, &dmc->memcontrol);
+
+ writel(mem.memconfig0, &dmc->memconfig0);
+ writel(mem.memconfig1, &dmc->memconfig1);
+
+ /* Config Precharge Policy */
+ writel(mem.prechconfig, &dmc->prechconfig);
+ /*
+ * TimingAref, TimingRow, TimingData, TimingPower Setting:
+ * Values as per Memory AC Parameters
+ */
+ writel(mem.timingref, &dmc->timingref);
+ writel(mem.timingrow, &dmc->timingrow);
+ writel(mem.timingdata, &dmc->timingdata);
+ writel(mem.timingpower, &dmc->timingpower);
+
+ /* Chip0: NOP Command: Assert and Hold CKE to high level */
+ writel(DIRECT_CMD_NOP, &dmc->directcmd);
+ sdelay(0x100000);
+
+ /* Chip0: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */
+ dmc_config_mrs(dmc, 0);
+ sdelay(0x100000);
+
+ /* Chip0: ZQINIT */
+ writel(DIRECT_CMD_ZQ, &dmc->directcmd);
+ sdelay(0x100000);
+
+ writel((DIRECT_CMD_NOP | DIRECT_CMD_CHIP1_SHIFT), &dmc->directcmd);
+ sdelay(0x100000);
+
+ /* Chip1: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */
+ dmc_config_mrs(dmc, 1);
+ sdelay(0x100000);
+
+ /* Chip1: ZQINIT */
+ writel((DIRECT_CMD_ZQ | DIRECT_CMD_CHIP1_SHIFT), &dmc->directcmd);
+ sdelay(0x100000);
+
+ phy_control_reset(1, dmc);
+ sdelay(0x100000);
+
+ /* turn on DREX0, DREX1 */
+ writel((mem.concontrol | AREF_EN), &dmc->concontrol);
+}
+
+void mem_ctrl_init(int reset)
+{
+ struct exynos4_dmc *dmc;
+
+ /*
+ * Async bridge configuration at CPU_core:
+ * 1: half_sync
+ * 0: full_sync
+ */
+ writel(1, ASYNC_CONFIG);
+#ifdef CONFIG_ORIGEN
+ /* Interleave: 2Bit, Interleave_bit1: 0x15, Interleave_bit0: 0x7 */
+ writel(APB_SFR_INTERLEAVE_CONF_VAL, EXYNOS4_MIU_BASE +
+ APB_SFR_INTERLEAVE_CONF_OFFSET);
+ /* Update MIU Configuration */
+ writel(APB_SFR_ARBRITATION_CONF_VAL, EXYNOS4_MIU_BASE +
+ APB_SFR_ARBRITATION_CONF_OFFSET);
+#else
+ writel(APB_SFR_INTERLEAVE_CONF_VAL, EXYNOS4_MIU_BASE +
+ APB_SFR_INTERLEAVE_CONF_OFFSET);
+ writel(INTERLEAVE_ADDR_MAP_START_ADDR, EXYNOS4_MIU_BASE +
+ ABP_SFR_INTERLEAVE_ADDRMAP_START_OFFSET);
+ writel(INTERLEAVE_ADDR_MAP_END_ADDR, EXYNOS4_MIU_BASE +
+ ABP_SFR_INTERLEAVE_ADDRMAP_END_OFFSET);
+ writel(INTERLEAVE_ADDR_MAP_EN, EXYNOS4_MIU_BASE +
+ ABP_SFR_SLV_ADDRMAP_CONF_OFFSET);
+#ifdef CONFIG_MIU_LINEAR
+ writel(SLAVE0_SINGLE_ADDR_MAP_START_ADDR, EXYNOS4_MIU_BASE +
+ ABP_SFR_SLV0_SINGLE_ADDRMAP_START_OFFSET);
+ writel(SLAVE0_SINGLE_ADDR_MAP_END_ADDR, EXYNOS4_MIU_BASE +
+ ABP_SFR_SLV0_SINGLE_ADDRMAP_END_OFFSET);
+ writel(SLAVE1_SINGLE_ADDR_MAP_START_ADDR, EXYNOS4_MIU_BASE +
+ ABP_SFR_SLV1_SINGLE_ADDRMAP_START_OFFSET);
+ writel(SLAVE1_SINGLE_ADDR_MAP_END_ADDR, EXYNOS4_MIU_BASE +
+ ABP_SFR_SLV1_SINGLE_ADDRMAP_END_OFFSET);
+ writel(APB_SFR_SLV_ADDR_MAP_CONF_VAL, EXYNOS4_MIU_BASE +
+ ABP_SFR_SLV_ADDRMAP_CONF_OFFSET);
+#endif
+#endif
+ /* DREX0 */
+ dmc = (struct exynos4_dmc *)samsung_get_base_dmc_ctrl();
+ dmc_init(dmc);
+ dmc = (struct exynos4_dmc *)(samsung_get_base_dmc_ctrl()
+ + DMC_OFFSET);
+ dmc_init(dmc);
+}
diff --git a/board/samsung/origen/origen_setup.h b/arch/arm/cpu/armv7/exynos/exynos4_setup.h
similarity index 63%
rename from board/samsung/origen/origen_setup.h
rename to arch/arm/cpu/armv7/exynos/exynos4_setup.h
index 930b948..6d25058 100644
--- a/board/samsung/origen/origen_setup.h
+++ b/arch/arm/cpu/armv7/exynos/exynos4_setup.h
@@ -1,5 +1,5 @@
/*
- * Machine Specific Values for ORIGEN board based on S5PV310
+ * Machine Specific Values for EXYNOS4012 based board
*
* Copyright (C) 2011 Samsung Electronics
*
@@ -29,111 +29,22 @@
#include <version.h>
#include <asm/arch/cpu.h>
-/* Offsets of clock registers (sources and dividers) */
-#define CLK_SRC_CPU_OFFSET 0x14200
-#define CLK_DIV_CPU0_OFFSET 0x14500
-#define CLK_DIV_CPU1_OFFSET 0x14504
-
-#define CLK_SRC_DMC_OFFSET 0x10200
-#define CLK_DIV_DMC0_OFFSET 0x10500
-#define CLK_DIV_DMC1_OFFSET 0x10504
-
-#define CLK_SRC_TOP0_OFFSET 0xC210
-#define CLK_SRC_TOP1_OFFSET 0xC214
-#define CLK_DIV_TOP_OFFSET 0xC510
-
-#define CLK_SRC_LEFTBUS_OFFSET 0x4200
-#define CLK_DIV_LEFTBUS_OFFSET 0x4500
-
-#define CLK_SRC_RIGHTBUS_OFFSET 0x8200
-#define CLK_DIV_RIGHTBUS_OFFSET 0x8500
-
-#define CLK_SRC_FSYS_OFFSET 0xC240
-#define CLK_DIV_FSYS1_OFFSET 0xC544
-#define CLK_DIV_FSYS2_OFFSET 0xC548
-#define CLK_DIV_FSYS3_OFFSET 0xC54C
-
-#define CLK_SRC_CAM_OFFSET 0xC220
-#define CLK_SRC_TV_OFFSET 0xC224
-#define CLK_SRC_MFC_OFFSET 0xC228
-#define CLK_SRC_G3D_OFFSET 0xC22C
-#define CLK_SRC_LCD0_OFFSET 0xC234
-#define CLK_SRC_PERIL0_OFFSET 0xC250
-
-#define CLK_DIV_CAM_OFFSET 0xC520
-#define CLK_DIV_TV_OFFSET 0xC524
-#define CLK_DIV_MFC_OFFSET 0xC528
-#define CLK_DIV_G3D_OFFSET 0xC52C
-#define CLK_DIV_LCD0_OFFSET 0xC534
-#define CLK_DIV_PERIL0_OFFSET 0xC550
-
-#define CLK_SRC_LCD0_OFFSET 0xC234
-
-#define APLL_LOCK_OFFSET 0x14000
-#define MPLL_LOCK_OFFSET 0x14008
-#define APLL_CON0_OFFSET 0x14100
-#define APLL_CON1_OFFSET 0x14104
-#define MPLL_CON0_OFFSET 0x14108
-#define MPLL_CON1_OFFSET 0x1410C
-
-#define EPLL_LOCK_OFFSET 0xC010
-#define VPLL_LOCK_OFFSET 0xC020
-#define EPLL_CON0_OFFSET 0xC110
-#define EPLL_CON1_OFFSET 0xC114
-#define VPLL_CON0_OFFSET 0xC120
-#define VPLL_CON1_OFFSET 0xC124
-
-/* DMC: DRAM Controllor Register offsets */
-#define DMC_CONCONTROL 0x00
-#define DMC_MEMCONTROL 0x04
-#define DMC_MEMCONFIG0 0x08
-#define DMC_MEMCONFIG1 0x0C
-#define DMC_DIRECTCMD 0x10
-#define DMC_PRECHCONFIG 0x14
-#define DMC_PHYCONTROL0 0x18
-#define DMC_PHYCONTROL1 0x1C
-#define DMC_PHYCONTROL2 0x20
-#define DMC_TIMINGAREF 0x30
-#define DMC_TIMINGROW 0x34
-#define DMC_TIMINGDATA 0x38
-#define DMC_TIMINGPOWER 0x3C
-#define DMC_PHYZQCONTROL 0x44
+#ifdef CONFIG_CLK_800_330_165
+#define DRAM_CLK_330
+#endif
+#ifdef CONFIG_CLK_1000_200_200
+#define DRAM_CLK_200
+#endif
+#ifdef CONFIG_CLK_1000_330_165
+#define DRAM_CLK_330
+#endif
+#ifdef CONFIG_CLK_1000_400_200
+#define DRAM_CLK_400
+#endif
/* Bus Configuration Register Address */
#define ASYNC_CONFIG 0x10010350
-/* MIU Config Register Offsets*/
-#define APB_SFR_INTERLEAVE_CONF_OFFSET 0x400
-#define APB_SFR_ARBRITATION_CONF_OFFSET 0xC00
-
-/* Offset for inform registers */
-#define INFORM0_OFFSET 0x800
-#define INFORM1_OFFSET 0x804
-
-/* GPIO Offsets for UART: GPIO Contol Register */
-#define EXYNOS4_GPIO_A0_CON_OFFSET 0x00
-#define EXYNOS4_GPIO_A1_CON_OFFSET 0x20
-
-/* UART Register offsets */
-#define ULCON_OFFSET 0x00
-#define UCON_OFFSET 0x04
-#define UFCON_OFFSET 0x08
-#define UBRDIV_OFFSET 0x28
-#define UFRACVAL_OFFSET 0x2C
-
-/* TZPC : Register Offsets */
-#define TZPC0_BASE 0x10110000
-#define TZPC1_BASE 0x10120000
-#define TZPC2_BASE 0x10130000
-#define TZPC3_BASE 0x10140000
-#define TZPC4_BASE 0x10150000
-#define TZPC5_BASE 0x10160000
-
-#define TZPC_DECPROT0SET_OFFSET 0x804
-#define TZPC_DECPROT1SET_OFFSET 0x810
-#define TZPC_DECPROT2SET_OFFSET 0x81C
-#define TZPC_DECPROT3SET_OFFSET 0x828
-
/* CLK_SRC_CPU */
#define MUX_HPM_SEL_MOUTAPLL 0x0
#define MUX_HPM_SEL_SCLKMPLL 0x1
@@ -498,135 +409,186 @@
| (VPLL_MRR << 24) \
| (VPLL_MFR << 16) \
| (VPLL_K << 0))
-/*
- * UART GPIO_A0/GPIO_A1 Control Register Value
- * 0x2: UART Function
- */
-#define EXYNOS4_GPIO_A0_CON_VAL 0x22222222
-#define EXYNOS4_GPIO_A1_CON_VAL 0x222222
-/* ULCON: UART Line Control Value 8N1 */
-#define WORD_LEN_5_BIT 0x00
-#define WORD_LEN_6_BIT 0x01
-#define WORD_LEN_7_BIT 0x02
-#define WORD_LEN_8_BIT 0x03
+/* DMC */
+#define DIRECT_CMD_NOP 0x07000000
+#define DIRECT_CMD_ZQ 0x0a000000
+#define DIRECT_CMD_CHIP1_SHIFT (1 << 20)
+#define MEM_TIMINGS_MSR_COUNT 4
+#define CTRL_START (1 << 0)
+#define CTRL_DLL_ON (1 << 1)
+#define AREF_EN (1 << 5)
+#define DRV_TYPE (1 << 6)
-#define STOP_BIT_1 0x00
-#define STOP_BIT_2 0x01
+struct mem_timings {
+ unsigned direct_cmd_msr[MEM_TIMINGS_MSR_COUNT];
+ unsigned timingref;
+ unsigned timingrow;
+ unsigned timingdata;
+ unsigned timingpower;
+ unsigned zqcontrol;
+ unsigned control0;
+ unsigned control1;
+ unsigned control2;
+ unsigned concontrol;
+ unsigned prechconfig;
+ unsigned memcontrol;
+ unsigned memconfig0;
+ unsigned memconfig1;
+ unsigned dll_resync;
+ unsigned dll_on;
+};
-#define NO_PARITY 0x00
-#define ODD_PARITY 0x4
-#define EVEN_PARITY 0x5
-#define FORCED_PARITY_CHECK_AS_1 0x6
-#define FORCED_PARITY_CHECK_AS_0 0x7
+/* MIU */
+/* MIU Config Register Offsets*/
+#define APB_SFR_INTERLEAVE_CONF_OFFSET 0x400
+#define APB_SFR_ARBRITATION_CONF_OFFSET 0xC00
+#define ABP_SFR_SLV_ADDRMAP_CONF_OFFSET 0x800
+#define ABP_SFR_INTERLEAVE_ADDRMAP_START_OFFSET 0x808
+#define ABP_SFR_INTERLEAVE_ADDRMAP_END_OFFSET 0x810
+#define ABP_SFR_SLV0_SINGLE_ADDRMAP_START_OFFSET 0x818
+#define ABP_SFR_SLV0_SINGLE_ADDRMAP_END_OFFSET 0x820
+#define ABP_SFR_SLV1_SINGLE_ADDRMAP_START_OFFSET 0x828
+#define ABP_SFR_SLV1_SINGLE_ADDRMAP_END_OFFSET 0x830
-#define INFRAMODE_NORMAL 0x00
-#define INFRAMODE_INFRARED 0x01
+#ifdef CONFIG_ORIGEN
+/* Interleave: 2Bit, Interleave_bit1: 0x15, Interleave_bit0: 0x7 */
+#define APB_SFR_INTERLEAVE_CONF_VAL 0x20001507
+#define APB_SFR_ARBRITATION_CONF_VAL 0x00000001
+#endif
-#define ULCON_VAL ((INFRAMODE_NORMAL << 6) \
- | (NO_PARITY << 3) \
- | (STOP_BIT_1 << 2) \
- | (WORD_LEN_8_BIT << 0))
+#define INTERLEAVE_ADDR_MAP_START_ADDR 0x40000000
+#define INTERLEAVE_ADDR_MAP_END_ADDR 0xbfffffff
+#define INTERLEAVE_ADDR_MAP_EN 0x00000001
-/*
- * UCON: UART Control Value
- * Tx_interrupt Type: Level
- * Rx_interrupt Type: Level
- * Rx Timeout Enabled: Yes
- * Rx-Error Atatus_Int Enable: Yes
- * Loop_Back: No
- * Break Signal: No
- * Transmit mode : Interrupt request/polling
- * Receive mode : Interrupt request/polling
- */
-#define TX_PULSE_INTERRUPT 0
-#define TX_LEVEL_INTERRUPT 1
-#define RX_PULSE_INTERRUPT 0
-#define RX_LEVEL_INTERRUPT 1
+#ifdef CONFIG_MIU_1BIT_INTERLEAVED
+/* Interleave_bit0: 0xC*/
+#define APB_SFR_INTERLEAVE_CONF_VAL 0x0000000c
+#endif
+#ifdef CONFIG_MIU_2BIT_INTERLEAVED
+/* Interleave: 2Bit, Interleave_bit1: 0x15, Interleave_bit0: 0xc */
+#define APB_SFR_INTERLEAVE_CONF_VAL 0x2000150c
+#endif
+#define SLAVE0_SINGLE_ADDR_MAP_START_ADDR 0x40000000
+#define SLAVE0_SINGLE_ADDR_MAP_END_ADDR 0x7fffffff
+#define SLAVE1_SINGLE_ADDR_MAP_START_ADDR 0x80000000
+#define SLAVE1_SINGLE_ADDR_MAP_END_ADDR 0xbfffffff
+/* Enable SME0 and SME1*/
+#define APB_SFR_SLV_ADDR_MAP_CONF_VAL 0x00000006
-#define RX_TIME_OUT ENABLE
-#define RX_ERROR_STATE_INT_ENB ENABLE
-#define LOOP_BACK DISABLE
-#define BREAK_SIGNAL DISABLE
+#define FORCE_DLL_RESYNC 3
+#define DLL_CONTROL_ON 1
-#define TX_MODE_DISABLED 0X00
-#define TX_MODE_IRQ_OR_POLL 0X01
-#define TX_MODE_DMA 0X02
+#define DIRECT_CMD1 0x00020000
+#define DIRECT_CMD2 0x00030000
+#define DIRECT_CMD3 0x00010002
+#define DIRECT_CMD4 0x00000328
-#define RX_MODE_DISABLED 0X00
-#define RX_MODE_IRQ_OR_POLL 0X01
-#define RX_MODE_DMA 0X02
+#define CTRL_ZQ_MODE_NOTERM (0x1 << 0)
+#define CTRL_ZQ_START (0x1 << 1)
+#define CTRL_ZQ_DIV (0 << 4)
+#define CTRL_ZQ_MODE_DDS (0x7 << 8)
+#define CTRL_ZQ_MODE_TERM (0x2 << 11)
+#define CTRL_ZQ_FORCE_IMPN (0x5 << 14)
+#define CTRL_ZQ_FORCE_IMPP (0x6 << 17)
+#define CTRL_DCC (0xE38 << 20)
+#define ZQ_CONTROL_VAL (CTRL_ZQ_MODE_NOTERM | CTRL_ZQ_START\
+ | CTRL_ZQ_DIV | CTRL_ZQ_MODE_DDS\
+ | CTRL_ZQ_MODE_TERM | CTRL_ZQ_FORCE_IMPN\
+ | CTRL_ZQ_FORCE_IMPP | CTRL_DCC)
-#define UCON_VAL ((TX_LEVEL_INTERRUPT << 9) \
- | (RX_LEVEL_INTERRUPT << 8) \
- | (RX_TIME_OUT << 7) \
- | (RX_ERROR_STATE_INT_ENB << 6) \
- | (LOOP_BACK << 5) \
- | (BREAK_SIGNAL << 4) \
- | (TX_MODE_IRQ_OR_POLL << 2) \
- | (RX_MODE_IRQ_OR_POLL << 0))
+#define ASYNC (0 << 0)
+#define CLK_RATIO (1 << 1)
+#define DIV_PIPE (1 << 3)
+#define AWR_ON (1 << 4)
+#define AREF_DISABLE (0 << 5)
+#define DRV_TYPE_DISABLE (0 << 6)
+#define CHIP0_NOT_EMPTY (0 << 8)
+#define CHIP1_NOT_EMPTY (0 << 9)
+#define DQ_SWAP_DISABLE (0 << 10)
+#define QOS_FAST_DISABLE (0 << 11)
+#define RD_FETCH (0x3 << 12)
+#define TIMEOUT_LEVEL0 (0xFFF << 16)
+#define CONCONTROL_VAL (ASYNC | CLK_RATIO | DIV_PIPE | AWR_ON\
+ | AREF_DISABLE | DRV_TYPE_DISABLE\
+ | CHIP0_NOT_EMPTY | CHIP1_NOT_EMPTY\
+ | DQ_SWAP_DISABLE | QOS_FAST_DISABLE\
+ | RD_FETCH | TIMEOUT_LEVEL0)
-/*
- * UFCON: UART FIFO Control Value
- * Tx FIFO Trigger LEVEL: 2 Bytes (001)
- * Rx FIFO Trigger LEVEL: 2 Bytes (001)
- * Tx Fifo Reset: No
- * Rx Fifo Reset: No
- * FIFO Enable: Yes
- */
-#define TX_FIFO_TRIGGER_LEVEL_0_BYTES 0x00
-#define TX_FIFO_TRIGGER_LEVEL_2_BYTES 0x1
-#define TX_FIFO_TRIGGER_LEVEL_4_BYTES 0x2
-#define TX_FIFO_TRIGGER_LEVEL_6_BYTES 0x3
-#define TX_FIFO_TRIGGER_LEVEL_8_BYTES 0x4
-#define TX_FIFO_TRIGGER_LEVEL_10_BYTES 0x5
-#define TX_FIFO_TRIGGER_LEVEL_12_BYTES 0x6
-#define TX_FIFO_TRIGGER_LEVEL_14_BYTES 0x7
+#define CLK_STOP_DISABLE (0 << 1)
+#define DPWRDN_DISABLE (0 << 2)
+#define DPWRDN_TYPE (0 << 3)
+#define TP_DISABLE (0 << 4)
+#define DSREF_DIABLE (0 << 5)
+#define ADD_LAT_PALL (1 << 6)
+#define MEM_TYPE_DDR3 (0x6 << 8)
+#define MEM_WIDTH_32 (0x2 << 12)
+#define NUM_CHIP_2 (1 << 16)
+#define BL_8 (0x3 << 20)
+#define MEMCONTROL_VAL (CLK_STOP_DISABLE | DPWRDN_DISABLE\
+ | DPWRDN_TYPE | TP_DISABLE | DSREF_DIABLE\
+ | ADD_LAT_PALL | MEM_TYPE_DDR3 | MEM_WIDTH_32\
+ | NUM_CHIP_2 | BL_8)
-#define RX_FIFO_TRIGGER_LEVEL_2_BYTES 0x0
-#define RX_FIFO_TRIGGER_LEVEL_4_BYTES 0x1
-#define RX_FIFO_TRIGGER_LEVEL_6_BYTES 0x2
-#define RX_FIFO_TRIGGER_LEVEL_8_BYTES 0x3
-#define RX_FIFO_TRIGGER_LEVEL_10_BYTES 0x4
-#define RX_FIFO_TRIGGER_LEVEL_12_BYTES 0x5
-#define RX_FIFO_TRIGGER_LEVEL_14_BYTES 0x6
-#define RX_FIFO_TRIGGER_LEVEL_16_BYTES 0x7
-#define TX_FIFO_TRIGGER_LEVEL TX_FIFO_TRIGGER_LEVEL_2_BYTES
-#define RX_FIFO_TRIGGER_LEVEL RX_FIFO_TRIGGER_LEVEL_4_BYTES
-#define TX_FIFO_RESET DISABLE
-#define RX_FIFO_RESET DISABLE
-#define FIFO_ENABLE ENABLE
-#define UFCON_VAL ((TX_FIFO_TRIGGER_LEVEL << 8) \
- | (RX_FIFO_TRIGGER_LEVEL << 4) \
- | (TX_FIFO_RESET << 2) \
- | (RX_FIFO_RESET << 1) \
- | (FIFO_ENABLE << 0))
-/*
- * Baud Rate Division Value
- * 115200 BAUD:
- * UBRDIV_VAL = SCLK_UART/((115200 * 16) - 1)
- * UBRDIV_VAL = (800 MHz)/((115200 * 16) - 1)
- */
-#define UBRDIV_VAL 0x35
+#define CHIP_BANK_8 (0x3 << 0)
+#define CHIP_ROW_14 (0x2 << 4)
+#define CHIP_COL_10 (0x3 << 8)
+#define CHIP_MAP_INTERLEAVED (1 << 12)
+#define CHIP_MASK (0xe0 << 16)
+#ifdef CONFIG_MIU_LINEAR
+#define CHIP0_BASE (0x40 << 24)
+#define CHIP1_BASE (0x60 << 24)
+#else
+#define CHIP0_BASE (0x20 << 24)
+#define CHIP1_BASE (0x40 << 24)
+#endif
+#define MEMCONFIG0_VAL (CHIP_BANK_8 | CHIP_ROW_14 | CHIP_COL_10\
+ | CHIP_MAP_INTERLEAVED | CHIP_MASK | CHIP0_BASE)
+#define MEMCONFIG1_VAL (CHIP_BANK_8 | CHIP_ROW_14 | CHIP_COL_10\
+ | CHIP_MAP_INTERLEAVED | CHIP_MASK | CHIP1_BASE)
-/*
- * Fractional Part of Baud Rate Divisor:
- * 115200 BAUD:
- * UBRFRACVAL = ((((SCLK_UART*10/(115200*16) -10))%10)*16/10)
- * UBRFRACVAL = ((((800MHz*10/(115200*16) -10))%10)*16/10)
- */
-#define UFRACVAL_VAL 0x4
+#define TP_CNT (0xff << 24)
+#define PRECHCONFIG TP_CNT
-/*
- * TZPC Register Value :
- * R0SIZE: 0x0 : Size of secured ram
- */
-#define R0SIZE 0x0
+#define CTRL_OFF (0 << 0)
+#define CTRL_DLL_OFF (0 << 1)
+#define CTRL_HALF (0 << 2)
+#define CTRL_DFDQS (1 << 3)
+#define DQS_DELAY (0 << 4)
+#define CTRL_START_POINT (0x10 << 8)
+#define CTRL_INC (0x10 << 16)
+#define CTRL_FORCE (0x71 << 24)
+#define CONTROL0_VAL (CTRL_OFF | CTRL_DLL_OFF | CTRL_HALF\
+ | CTRL_DFDQS | DQS_DELAY | CTRL_START_POINT\
+ | CTRL_INC | CTRL_FORCE)
-/*
- * TZPC Decode Protection Register Value :
- * DECPROTXSET: 0xFF : Set Decode region to non-secure
- */
-#define DECPROTXSET 0xFF
+#define CTRL_SHIFTC (0x6 << 0)
+#define CTRL_REF (8 << 4)
+#define CTRL_SHGATE (1 << 29)
+#define TERM_READ_EN (1 << 30)
+#define TERM_WRITE_EN (1 << 31)
+#define CONTROL1_VAL (CTRL_SHIFTC | CTRL_REF | CTRL_SHGATE\
+ | TERM_READ_EN | TERM_WRITE_EN)
+
+#define CONTROL2_VAL 0x00000000
+
+#ifdef CONFIG_ORIGEN
+#define TIMINGREF_VAL 0x000000BB
+#define TIMINGROW_VAL 0x4046654f
+#define TIMINGDATA_VAL 0x46400506
+#define TIMINGPOWER_VAL 0x52000A3C
+#else
+#define TIMINGREF_VAL 0x000000BC
+#ifdef DRAM_CLK_330
+#define TIMINGROW_VAL 0x3545548d
+#define TIMINGDATA_VAL 0x45430506
+#define TIMINGPOWER_VAL 0x4439033c
+#endif
+#ifdef DRAM_CLK_400
+#define TIMINGROW_VAL 0x45430506
+#define TIMINGDATA_VAL 0x56500506
+#define TIMINGPOWER_VAL 0x5444033d
+#endif
+#endif
#endif
diff --git a/board/samsung/smdk5250/setup.h b/arch/arm/cpu/armv7/exynos/exynos5_setup.h
similarity index 92%
rename from board/samsung/smdk5250/setup.h
rename to arch/arm/cpu/armv7/exynos/exynos5_setup.h
index 34d8bc31..8f36c16 100644
--- a/board/samsung/smdk5250/setup.h
+++ b/arch/arm/cpu/armv7/exynos/exynos5_setup.h
@@ -28,18 +28,6 @@
#include <config.h>
#include <asm/arch/dmc.h>
-/* TZPC : Register Offsets */
-#define TZPC0_BASE 0x10100000
-#define TZPC1_BASE 0x10110000
-#define TZPC2_BASE 0x10120000
-#define TZPC3_BASE 0x10130000
-#define TZPC4_BASE 0x10140000
-#define TZPC5_BASE 0x10150000
-#define TZPC6_BASE 0x10160000
-#define TZPC7_BASE 0x10170000
-#define TZPC8_BASE 0x10180000
-#define TZPC9_BASE 0x10190000
-
/* APLL_CON1 */
#define APLL_CON1_VAL (0x00203800)
@@ -105,17 +93,17 @@
#define DMC_MEMCONTROL_MRR_BYTE_31_24 (3 << 25)
/* MEMCONFIG0 register bit fields */
-#define DMC_MEMCONFIGx_CHIP_MAP_INTERLEAVED (1 << 12)
-#define DMC_MEMCONFIGx_CHIP_COL_10 (3 << 8)
-#define DMC_MEMCONFIGx_CHIP_ROW_14 (2 << 4)
-#define DMC_MEMCONFIGx_CHIP_ROW_15 (3 << 4)
-#define DMC_MEMCONFIGx_CHIP_BANK_8 (3 << 0)
+#define DMC_MEMCONFIGX_CHIP_MAP_INTERLEAVED (1 << 12)
+#define DMC_MEMCONFIGX_CHIP_COL_10 (3 << 8)
+#define DMC_MEMCONFIGX_CHIP_ROW_14 (2 << 4)
+#define DMC_MEMCONFIGX_CHIP_ROW_15 (3 << 4)
+#define DMC_MEMCONFIGX_CHIP_BANK_8 (3 << 0)
-#define DMC_MEMBASECONFIGx_CHIP_BASE(x) (x << 16)
-#define DMC_MEMBASECONFIGx_CHIP_MASK(x) (x << 0)
+#define DMC_MEMBASECONFIGX_CHIP_BASE(x) (x << 16)
+#define DMC_MEMBASECONFIGX_CHIP_MASK(x) (x << 0)
#define DMC_MEMBASECONFIG_VAL(x) ( \
- DMC_MEMBASECONFIGx_CHIP_BASE(x) | \
- DMC_MEMBASECONFIGx_CHIP_MASK(0x780) \
+ DMC_MEMBASECONFIGX_CHIP_BASE(x) | \
+ DMC_MEMBASECONFIGX_CHIP_MASK(0x780) \
)
#define DMC_MEMBASECONFIG0_VAL DMC_MEMBASECONFIG_VAL(0x40)
@@ -458,18 +446,6 @@
/* CLK_GATE_IP_DISP1 */
#define CLK_GATE_DP1_ALLOW (1 << 4)
-/*
- * TZPC Register Value :
- * R0SIZE: 0x0 : Size of secured ram
- */
-#define R0SIZE 0x0
-
-/*
- * TZPC Decode Protection Register Value :
- * DECPROTXSET: 0xFF : Set Decode region to non-secure
- */
-#define DECPROTXSET 0xFF
-
#define DDR3PHY_CTRL_PHY_RESET (1 << 0)
#define DDR3PHY_CTRL_PHY_RESET_OFF (0 << 0)
@@ -537,9 +513,11 @@
* which the DMC uses to decide how to split a memory
* chunk into smaller chunks to support concurrent
* accesses; may vary across boards.
+ * @param reset Reset DDR PHY during initialization.
* @return 0 if ok, SETUP_ERR_... if there is a problem
*/
-int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size);
+int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
+ int reset);
/*
* Configure ZQ I/O interface
@@ -586,9 +564,4 @@
* @param ddr_mode Type of DDR memory
*/
void update_reset_dll(struct exynos5_dmc *, enum ddr_mode);
-
-void sdelay(unsigned long);
-void mem_ctrl_init(void);
-void system_clock_init(void);
-void tzpc_init(void);
#endif
diff --git a/arch/arm/cpu/armv7/exynos/lowlevel_init.c b/arch/arm/cpu/armv7/exynos/lowlevel_init.c
new file mode 100644
index 0000000..11fe5b8
--- /dev/null
+++ b/arch/arm/cpu/armv7/exynos/lowlevel_init.c
@@ -0,0 +1,73 @@
+/*
+ * Lowlevel setup for EXYNOS5 based board
+ *
+ * Copyright (C) 2013 Samsung Electronics
+ * Rajeshwari Shinde <rajeshwari.s@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <config.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/dmc.h>
+#include <asm/arch/power.h>
+#include <asm/arch/tzpc.h>
+#include <asm/arch/periph.h>
+#include <asm/arch/pinmux.h>
+#include "common_setup.h"
+
+/* These are the things we can do during low-level init */
+enum {
+ DO_WAKEUP = 1 << 0,
+ DO_CLOCKS = 1 << 1,
+ DO_MEM_RESET = 1 << 2,
+ DO_UART = 1 << 3,
+};
+
+int do_lowlevel_init(void)
+{
+ uint32_t reset_status;
+ int actions = 0;
+
+ arch_cpu_init();
+
+ reset_status = get_reset_status();
+
+ switch (reset_status) {
+ case S5P_CHECK_SLEEP:
+ actions = DO_CLOCKS | DO_WAKEUP;
+ break;
+ case S5P_CHECK_DIDLE:
+ case S5P_CHECK_LPA:
+ actions = DO_WAKEUP;
+ break;
+ default:
+ /* This is a normal boot (not a wake from sleep) */
+ actions = DO_CLOCKS | DO_MEM_RESET;
+ }
+
+ if (actions & DO_CLOCKS) {
+ system_clock_init();
+ mem_ctrl_init(actions & DO_MEM_RESET);
+ tzpc_init();
+ }
+
+ return actions & DO_WAKEUP;
+}
diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c
index bd499b4..2042062 100644
--- a/arch/arm/cpu/armv7/exynos/pinmux.c
+++ b/arch/arm/cpu/armv7/exynos/pinmux.c
@@ -408,9 +408,49 @@
return 0;
}
+static void exynos4_uart_config(int peripheral)
+{
+ struct exynos4_gpio_part1 *gpio1 =
+ (struct exynos4_gpio_part1 *)samsung_get_base_gpio_part1();
+ struct s5p_gpio_bank *bank;
+ int i, start, count;
+
+ switch (peripheral) {
+ case PERIPH_ID_UART0:
+ bank = &gpio1->a0;
+ start = 0;
+ count = 4;
+ break;
+ case PERIPH_ID_UART1:
+ bank = &gpio1->a0;
+ start = 4;
+ count = 4;
+ break;
+ case PERIPH_ID_UART2:
+ bank = &gpio1->a1;
+ start = 0;
+ count = 4;
+ break;
+ case PERIPH_ID_UART3:
+ bank = &gpio1->a1;
+ start = 4;
+ count = 2;
+ break;
+ }
+ for (i = start; i < start + count; i++) {
+ s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE);
+ s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
+ }
+}
static int exynos4_pinmux_config(int peripheral, int flags)
{
switch (peripheral) {
+ case PERIPH_ID_UART0:
+ case PERIPH_ID_UART1:
+ case PERIPH_ID_UART2:
+ case PERIPH_ID_UART3:
+ exynos4_uart_config(peripheral);
+ break;
case PERIPH_ID_I2C0:
case PERIPH_ID_I2C1:
case PERIPH_ID_I2C2:
diff --git a/arch/arm/cpu/armv7/exynos/power.c b/arch/arm/cpu/armv7/exynos/power.c
index 6375a81..5d3bda2 100644
--- a/arch/arm/cpu/armv7/exynos/power.c
+++ b/arch/arm/cpu/armv7/exynos/power.c
@@ -140,3 +140,53 @@
setbits_le32(&power->ps_hold_control, POWER_ENABLE_HW_TRIP);
}
}
+
+static uint32_t exynos5_get_reset_status(void)
+{
+ struct exynos5_power *power =
+ (struct exynos5_power *)samsung_get_base_power();
+
+ return power->inform1;
+}
+
+static uint32_t exynos4_get_reset_status(void)
+{
+ struct exynos4_power *power =
+ (struct exynos4_power *)samsung_get_base_power();
+
+ return power->inform1;
+}
+
+uint32_t get_reset_status(void)
+{
+ if (cpu_is_exynos5())
+ return exynos5_get_reset_status();
+ else
+ return exynos4_get_reset_status();
+}
+
+static void exynos5_power_exit_wakeup(void)
+{
+ struct exynos5_power *power =
+ (struct exynos5_power *)samsung_get_base_power();
+ typedef void (*resume_func)(void);
+
+ ((resume_func)power->inform0)();
+}
+
+static void exynos4_power_exit_wakeup(void)
+{
+ struct exynos4_power *power =
+ (struct exynos4_power *)samsung_get_base_power();
+ typedef void (*resume_func)(void);
+
+ ((resume_func)power->inform0)();
+}
+
+void power_exit_wakeup(void)
+{
+ if (cpu_is_exynos5())
+ exynos5_power_exit_wakeup();
+ else
+ exynos4_power_exit_wakeup();
+}
diff --git a/arch/arm/cpu/armv7/exynos/spl_boot.c b/arch/arm/cpu/armv7/exynos/spl_boot.c
new file mode 100644
index 0000000..6e8dd3b
--- /dev/null
+++ b/arch/arm/cpu/armv7/exynos/spl_boot.c
@@ -0,0 +1,203 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include<common.h>
+#include<config.h>
+
+#include <asm/arch/clock.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/dmc.h>
+#include <asm/arch/power.h>
+#include <asm/arch/spl.h>
+
+#include "common_setup.h"
+#include "clock_init.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+#define OM_STAT (0x1f << 1)
+
+/* Index into irom ptr table */
+enum index {
+ MMC_INDEX,
+ EMMC44_INDEX,
+ EMMC44_END_INDEX,
+ SPI_INDEX,
+ USB_INDEX,
+};
+
+/* IROM Function Pointers Table */
+u32 irom_ptr_table[] = {
+ [MMC_INDEX] = 0x02020030, /* iROM Function Pointer-SDMMC boot */
+ [EMMC44_INDEX] = 0x02020044, /* iROM Function Pointer-EMMC4.4 boot*/
+ [EMMC44_END_INDEX] = 0x02020048,/* iROM Function Pointer
+ -EMMC4.4 end boot operation */
+ [SPI_INDEX] = 0x02020058, /* iROM Function Pointer-SPI boot */
+ [USB_INDEX] = 0x02020070, /* iROM Function Pointer-USB boot*/
+ };
+
+void *get_irom_func(int index)
+{
+ return (void *)*(u32 *)irom_ptr_table[index];
+}
+
+#ifdef CONFIG_USB_BOOTING
+/*
+ * Set/clear program flow prediction and return the previous state.
+ */
+static int config_branch_prediction(int set_cr_z)
+{
+ unsigned int cr;
+
+ /* System Control Register: 11th bit Z Branch prediction enable */
+ cr = get_cr();
+ set_cr(set_cr_z ? cr | CR_Z : cr & ~CR_Z);
+
+ return cr & CR_Z;
+}
+#endif
+
+/*
+* Copy U-boot from mmc to RAM:
+* COPY_BL2_FNPTR_ADDR: Address in iRAM, which Contains
+* Pointer to API (Data transfer from mmc to ram)
+*/
+void copy_uboot_to_ram(void)
+{
+ enum boot_mode bootmode = BOOT_MODE_OM;
+
+ u32 (*copy_bl2)(u32 offset, u32 nblock, u32 dst) = NULL;
+ u32 offset = 0, size = 0;
+#ifdef CONFIG_SUPPORT_EMMC_BOOT
+ u32 (*copy_bl2_from_emmc)(u32 nblock, u32 dst);
+ void (*end_bootop_from_emmc)(void);
+#endif
+#ifdef CONFIG_USB_BOOTING
+ u32 (*usb_copy)(void);
+ int is_cr_z_set;
+ unsigned int sec_boot_check;
+
+ /* Read iRAM location to check for secondary USB boot mode */
+ sec_boot_check = readl(EXYNOS_IRAM_SECONDARY_BASE);
+ if (sec_boot_check == EXYNOS_USB_SECONDARY_BOOT)
+ bootmode = BOOT_MODE_USB;
+#endif
+
+ if (bootmode == BOOT_MODE_OM)
+ bootmode = readl(samsung_get_base_power()) & OM_STAT;
+
+ switch (bootmode) {
+#ifdef CONFIG_SPI_BOOTING
+ case BOOT_MODE_SERIAL:
+ offset = SPI_FLASH_UBOOT_POS;
+ size = CONFIG_BL2_SIZE;
+ copy_bl2 = get_irom_func(SPI_INDEX);
+ break;
+#endif
+ case BOOT_MODE_MMC:
+ offset = BL2_START_OFFSET;
+ size = BL2_SIZE_BLOC_COUNT;
+ copy_bl2 = get_irom_func(MMC_INDEX);
+ break;
+#ifdef CONFIG_SUPPORT_EMMC_BOOT
+ case BOOT_MODE_EMMC:
+ /* Set the FSYS1 clock divisor value for EMMC boot */
+ emmc_boot_clk_div_set();
+
+ copy_bl2_from_emmc = get_irom_func(EMMC44_INDEX);
+ end_bootop_from_emmc = get_irom_func(EMMC44_END_INDEX);
+
+ copy_bl2_from_emmc(BL2_SIZE_BLOC_COUNT, CONFIG_SYS_TEXT_BASE);
+ end_bootop_from_emmc();
+ break;
+#endif
+#ifdef CONFIG_USB_BOOTING
+ case BOOT_MODE_USB:
+ /*
+ * iROM needs program flow prediction to be disabled
+ * before copy from USB device to RAM
+ */
+ is_cr_z_set = config_branch_prediction(0);
+ usb_copy = get_irom_func(USB_INDEX);
+ usb_copy();
+ config_branch_prediction(is_cr_z_set);
+ break;
+#endif
+ default:
+ break;
+ }
+
+ if (copy_bl2)
+ copy_bl2(offset, size, CONFIG_SYS_TEXT_BASE);
+}
+
+void memzero(void *s, size_t n)
+{
+ char *ptr = s;
+ size_t i;
+
+ for (i = 0; i < n; i++)
+ *ptr++ = '\0';
+}
+
+/**
+ * Set up the U-Boot global_data pointer
+ *
+ * This sets the address of the global data, and sets up basic values.
+ *
+ * @param gdp Value to give to gd
+ */
+static void setup_global_data(gd_t *gdp)
+{
+ gd = gdp;
+ memzero((void *)gd, sizeof(gd_t));
+ gd->flags |= GD_FLG_RELOC;
+ gd->baudrate = CONFIG_BAUDRATE;
+ gd->have_console = 1;
+}
+
+void board_init_f(unsigned long bootflag)
+{
+ __aligned(8) gd_t local_gd;
+ __attribute__((noreturn)) void (*uboot)(void);
+
+ setup_global_data(&local_gd);
+
+ if (do_lowlevel_init())
+ power_exit_wakeup();
+
+ copy_uboot_to_ram();
+
+ /* Jump to U-Boot image */
+ uboot = (void *)CONFIG_SYS_TEXT_BASE;
+ (*uboot)();
+ /* Never returns Here */
+}
+
+/* Place Holders */
+void board_init_r(gd_t *id, ulong dest_addr)
+{
+ /* Function attribute is no-return */
+ /* This Function never executes */
+ while (1)
+ ;
+}
+void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3) {}
diff --git a/board/samsung/smdk5250/tzpc_init.c b/arch/arm/cpu/armv7/exynos/tzpc.c
similarity index 69%
rename from board/samsung/smdk5250/tzpc_init.c
rename to arch/arm/cpu/armv7/exynos/tzpc.c
index c833541..f5e8e9c 100644
--- a/board/samsung/smdk5250/tzpc_init.c
+++ b/arch/arm/cpu/armv7/exynos/tzpc.c
@@ -22,27 +22,36 @@
* MA 02111-1307 USA
*/
+#include <common.h>
#include <asm/arch/tzpc.h>
-#include"setup.h"
+#include <asm/io.h>
/* Setting TZPC[TrustZone Protection Controller] */
void tzpc_init(void)
{
struct exynos_tzpc *tzpc;
- unsigned int addr;
+ unsigned int addr, start = 0, end = 0;
- for (addr = TZPC0_BASE; addr <= TZPC9_BASE; addr += TZPC_BASE_OFFSET) {
+ start = samsung_get_base_tzpc();
+
+ if (cpu_is_exynos5())
+ end = start + ((EXYNOS5_NR_TZPC_BANKS - 1) * TZPC_BASE_OFFSET);
+ else if (cpu_is_exynos4())
+ end = start + ((EXYNOS4_NR_TZPC_BANKS - 1) * TZPC_BASE_OFFSET);
+
+ for (addr = start; addr <= end; addr += TZPC_BASE_OFFSET) {
tzpc = (struct exynos_tzpc *)addr;
- if (addr == TZPC0_BASE)
+ if (addr == start)
writel(R0SIZE, &tzpc->r0size);
writel(DECPROTXSET, &tzpc->decprot0set);
writel(DECPROTXSET, &tzpc->decprot1set);
- if (addr != TZPC9_BASE) {
- writel(DECPROTXSET, &tzpc->decprot2set);
- writel(DECPROTXSET, &tzpc->decprot3set);
- }
+ if (cpu_is_exynos5() && (addr == end))
+ break;
+
+ writel(DECPROTXSET, &tzpc->decprot2set);
+ writel(DECPROTXSET, &tzpc->decprot3set);
}
}
diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile
index 55e82ba..c4b9809 100644
--- a/arch/arm/cpu/armv7/omap-common/Makefile
+++ b/arch/arm/cpu/armv7/omap-common/Makefile
@@ -34,6 +34,7 @@
COBJS += clocks-common.o
COBJS += emif-common.o
COBJS += vc.o
+COBJS += abb.o
endif
ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TI814X),)
diff --git a/arch/arm/cpu/armv7/omap-common/abb.c b/arch/arm/cpu/armv7/omap-common/abb.c
new file mode 100644
index 0000000..87d1fb8
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap-common/abb.c
@@ -0,0 +1,137 @@
+/*
+ *
+ * Adaptive Body Bias programming sequence for OMAP family
+ *
+ * (C) Copyright 2013
+ * Texas Instruments, <www.ti.com>
+ *
+ * Andrii Tseglytskyi <andrii.tseglytskyi@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/omap_common.h>
+#include <asm/io.h>
+#include <asm/arch/sys_proto.h>
+
+__weak s8 abb_setup_ldovbb(u32 fuse, u32 ldovbb)
+{
+ return -1;
+}
+
+static void abb_setup_timings(u32 setup)
+{
+ u32 sys_rate, sr2_cnt, clk_cycles;
+
+ /*
+ * SR2_WTCNT_VALUE is the settling time for the ABB ldo after a
+ * transition and must be programmed with the correct time at boot.
+ * The value programmed into the register is the number of SYS_CLK
+ * clock cycles that match a given wall time profiled for the ldo.
+ * This value depends on:
+ * settling time of ldo in micro-seconds (varies per OMAP family),
+ * of clock cycles per SYS_CLK period (varies per OMAP family),
+ * the SYS_CLK frequency in MHz (varies per board)
+ * The formula is:
+ *
+ * ldo settling time (in micro-seconds)
+ * SR2_WTCNT_VALUE = ------------------------------------------
+ * (# system clock cycles) * (sys_clk period)
+ *
+ * Put another way:
+ *
+ * SR2_WTCNT_VALUE = settling time / (# SYS_CLK cycles / SYS_CLK rate))
+ *
+ * To avoid dividing by zero multiply both "# clock cycles" and
+ * "settling time" by 10 such that the final result is the one we want.
+ */
+
+ /* calculate SR2_WTCNT_VALUE */
+ sys_rate = DIV_ROUND(V_OSCK, 1000000);
+ clk_cycles = DIV_ROUND(OMAP_ABB_CLOCK_CYCLES * 10, sys_rate);
+ sr2_cnt = DIV_ROUND(OMAP_ABB_SETTLING_TIME * 10, clk_cycles);
+
+ setbits_le32(setup,
+ sr2_cnt << (ffs(OMAP_ABB_SETUP_SR2_WTCNT_VALUE_MASK) - 1));
+}
+
+void abb_setup(u32 fuse, u32 ldovbb, u32 setup, u32 control,
+ u32 txdone, u32 txdone_mask, u32 opp)
+{
+ u32 abb_type_mask, opp_sel_mask;
+
+ /* sanity check */
+ if (!setup || !control || !txdone)
+ return;
+
+ /* setup ABB only in case of Fast or Slow OPP */
+ switch (opp) {
+ case OMAP_ABB_FAST_OPP:
+ abb_type_mask = OMAP_ABB_SETUP_ACTIVE_FBB_SEL_MASK;
+ opp_sel_mask = OMAP_ABB_CONTROL_FAST_OPP_SEL_MASK;
+ break;
+ case OMAP_ABB_SLOW_OPP:
+ abb_type_mask = OMAP_ABB_SETUP_ACTIVE_RBB_SEL_MASK;
+ opp_sel_mask = OMAP_ABB_CONTROL_SLOW_OPP_SEL_MASK;
+ break;
+ default:
+ return;
+ }
+
+ /*
+ * For some OMAP silicons additional setup for LDOVBB register is
+ * required. This is determined by data retrieved from corresponding
+ * OPP EFUSE register. Data, which is retrieved from EFUSE - is
+ * ABB enable/disable flag and VSET value, which must be copied
+ * to LDOVBB register. If function call fails - return quietly,
+ * it means no ABB is required for such silicon.
+ *
+ * For silicons, which don't require LDOVBB setup "fuse" and
+ * "ldovbb" offsets are not defined. ABB will be initialized in
+ * the common way for them.
+ */
+ if (fuse && ldovbb) {
+ if (abb_setup_ldovbb(fuse, ldovbb))
+ return;
+ }
+
+ /* clear ABB registers */
+ writel(0, setup);
+ writel(0, control);
+
+ /* configure timings, based on oscillator value */
+ abb_setup_timings(setup);
+
+ /* clear pending interrupts before setup */
+ setbits_le32(txdone, txdone_mask);
+
+ /* select ABB type */
+ setbits_le32(setup, abb_type_mask | OMAP_ABB_SETUP_SR2EN_MASK);
+
+ /* initiate ABB ldo change */
+ setbits_le32(control, opp_sel_mask | OMAP_ABB_CONTROL_OPP_CHANGE_MASK);
+
+ /* wait until transition complete */
+ if (!wait_on_value(txdone_mask, txdone_mask, (void *)txdone, LDELAY))
+ puts("Error: ABB txdone is not set\n");
+
+ /* clear ABB tranxdone */
+ setbits_le32(txdone, txdone_mask);
+}
diff --git a/arch/arm/cpu/armv7/omap-common/boot-common.c b/arch/arm/cpu/armv7/omap-common/boot-common.c
index bff7e9c..76ae1b6 100644
--- a/arch/arm/cpu/armv7/omap-common/boot-common.c
+++ b/arch/arm/cpu/armv7/omap-common/boot-common.c
@@ -25,6 +25,45 @@
DECLARE_GLOBAL_DATA_PTR;
+void save_omap_boot_params(void)
+{
+ u32 rom_params = *((u32 *)OMAP_SRAM_SCRATCH_BOOT_PARAMS);
+ u8 boot_device;
+ u32 dev_desc, dev_data;
+
+ if ((rom_params < NON_SECURE_SRAM_START) ||
+ (rom_params > NON_SECURE_SRAM_END))
+ return;
+
+ /*
+ * rom_params can be type casted to omap_boot_parameters and
+ * used. But it not correct to assume that romcode structure
+ * encoding would be same as u-boot. So use the defined offsets.
+ */
+ gd->arch.omap_boot_params.omap_bootdevice = boot_device =
+ *((u8 *)(rom_params + BOOT_DEVICE_OFFSET));
+
+ gd->arch.omap_boot_params.ch_flags =
+ *((u8 *)(rom_params + CH_FLAGS_OFFSET));
+
+ if ((boot_device >= MMC_BOOT_DEVICES_START) &&
+ (boot_device <= MMC_BOOT_DEVICES_END)) {
+#if !defined(CONFIG_AM33XX) && !defined(CONFIG_TI81XX)
+ if ((omap_hw_init_context() ==
+ OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL)) {
+ gd->arch.omap_boot_params.omap_bootmode =
+ *((u8 *)(rom_params + BOOT_MODE_OFFSET));
+ } else
+#endif
+ {
+ dev_desc = *((u32 *)(rom_params + DEV_DESC_PTR_OFFSET));
+ dev_data = *((u32 *)(dev_desc + DEV_DATA_PTR_OFFSET));
+ gd->arch.omap_boot_params.omap_bootmode =
+ *((u32 *)(dev_data + BOOT_MODE_OFFSET));
+ }
+ }
+}
+
#ifdef CONFIG_SPL_BUILD
u32 spl_boot_device(void)
{
diff --git a/arch/arm/cpu/armv7/omap-common/clocks-common.c b/arch/arm/cpu/armv7/omap-common/clocks-common.c
index 99910cd..ef23127 100644
--- a/arch/arm/cpu/armv7/omap-common/clocks-common.c
+++ b/arch/arm/cpu/armv7/omap-common/clocks-common.c
@@ -30,9 +30,10 @@
* MA 02111-1307 USA
*/
#include <common.h>
+#include <i2c.h>
#include <asm/omap_common.h>
#include <asm/gpio.h>
-#include <asm/arch/clocks.h>
+#include <asm/arch/clock.h>
#include <asm/arch/sys_proto.h>
#include <asm/utils.h>
#include <asm/omap_gpio.h>
@@ -49,13 +50,12 @@
const u32 sys_clk_array[8] = {
12000000, /* 12 MHz */
- 13000000, /* 13 MHz */
+ 20000000, /* 20 MHz */
16800000, /* 16.8 MHz */
19200000, /* 19.2 MHz */
26000000, /* 26 MHz */
27000000, /* 27 MHz */
38400000, /* 38.4 MHz */
- 20000000, /* 20 MHz */
};
static inline u32 __get_sys_clk_index(void)
@@ -74,13 +74,6 @@
/* SYS_CLKSEL - 1 to match the dpll param array indices */
ind = (readl((*prcm)->cm_sys_clksel) &
CM_SYS_CLKSEL_SYS_CLKSEL_MASK) - 1;
- /*
- * SYS_CLKSEL value for 20MHz is 0. This is introduced newly
- * in DRA7XX socs. SYS_CLKSEL -1 will be greater than
- * NUM_SYS_CLK. So considering the last 3 bits as the index
- * for the dpll param array.
- */
- ind &= CM_SYS_CLKSEL_SYS_CLKSEL_MASK;
}
return ind;
}
@@ -440,6 +433,12 @@
params = get_abe_dpll_params(*dplls_data);
#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
abe_ref_clk = CM_ABE_PLL_REF_CLKSEL_CLKSEL_SYSCLK;
+
+ if (omap_revision() == DRA752_ES1_0)
+ /* Select the sys clk for dpll_abe */
+ clrsetbits_le32((*prcm)->cm_abe_pll_sys_clksel,
+ CM_CLKSEL_ABE_PLL_SYS_CLKSEL_MASK,
+ CM_ABE_PLL_SYS_CLKSEL_SYSCLK2);
#else
abe_ref_clk = CM_ABE_PLL_REF_CLKSEL_CLKSEL_32KCLK;
/*
@@ -487,6 +486,10 @@
u32 offset = volt_mv;
int ret = 0;
+ if (!volt_mv)
+ return;
+
+ pmic->pmic_bus_init();
/* See if we can first get the GPIO if needed */
if (pmic->gpio_en)
ret = gpio_request(pmic->gpio, "PMIC_GPIO");
@@ -509,14 +512,45 @@
debug("do_scale_vcore: volt - %d offset_code - 0x%x\n", volt_mv,
offset_code);
- if (omap_vc_bypass_send_value(SMPS_I2C_SLAVE_ADDR,
- vcore_reg, offset_code))
+ if (pmic->pmic_write(pmic->i2c_slave_addr, vcore_reg, offset_code))
printf("Scaling voltage failed for 0x%x\n", vcore_reg);
if (pmic->gpio_en)
gpio_direction_output(pmic->gpio, 1);
}
+static u32 optimize_vcore_voltage(struct volts const *v)
+{
+ u32 val;
+ if (!v->value)
+ return 0;
+ if (!v->efuse.reg)
+ return v->value;
+
+ switch (v->efuse.reg_bits) {
+ case 16:
+ val = readw(v->efuse.reg);
+ break;
+ case 32:
+ val = readl(v->efuse.reg);
+ break;
+ default:
+ printf("Error: efuse 0x%08x bits=%d unknown\n",
+ v->efuse.reg, v->efuse.reg_bits);
+ return v->value;
+ }
+
+ if (!val) {
+ printf("Error: efuse 0x%08x bits=%d val=0, using %d\n",
+ v->efuse.reg, v->efuse.reg_bits, v->value);
+ return v->value;
+ }
+
+ debug("%s:efuse 0x%08x bits=%d Vnom=%d, using efuse value %d\n",
+ __func__, v->efuse.reg, v->efuse.reg_bits, v->value, val);
+ return val;
+}
+
/*
* Setup the voltages for vdd_mpu, vdd_core, and vdd_iva
* We set the maximum voltages allowed here because Smart-Reflex is not
@@ -525,16 +559,34 @@
*/
void scale_vcores(struct vcores_data const *vcores)
{
- omap_vc_init(PRM_VC_I2C_CHANNEL_FREQ_KHZ);
+ u32 val;
- do_scale_vcore(vcores->core.addr, vcores->core.value,
- vcores->core.pmic);
+ val = optimize_vcore_voltage(&vcores->core);
+ do_scale_vcore(vcores->core.addr, val, vcores->core.pmic);
- do_scale_vcore(vcores->mpu.addr, vcores->mpu.value,
- vcores->mpu.pmic);
+ val = optimize_vcore_voltage(&vcores->mpu);
+ do_scale_vcore(vcores->mpu.addr, val, vcores->mpu.pmic);
- do_scale_vcore(vcores->mm.addr, vcores->mm.value,
- vcores->mm.pmic);
+ /* Configure MPU ABB LDO after scale */
+ abb_setup((*ctrl)->control_std_fuse_opp_vdd_mpu_2,
+ (*ctrl)->control_wkup_ldovbb_mpu_voltage_ctrl,
+ (*prcm)->prm_abbldo_mpu_setup,
+ (*prcm)->prm_abbldo_mpu_ctrl,
+ (*prcm)->prm_irqstatus_mpu_2,
+ OMAP_ABB_MPU_TXDONE_MASK,
+ OMAP_ABB_FAST_OPP);
+
+ val = optimize_vcore_voltage(&vcores->mm);
+ do_scale_vcore(vcores->mm.addr, val, vcores->mm.pmic);
+
+ val = optimize_vcore_voltage(&vcores->gpu);
+ do_scale_vcore(vcores->gpu.addr, val, vcores->gpu.pmic);
+
+ val = optimize_vcore_voltage(&vcores->eve);
+ do_scale_vcore(vcores->eve.addr, val, vcores->eve.pmic);
+
+ val = optimize_vcore_voltage(&vcores->iva);
+ do_scale_vcore(vcores->iva.addr, val, vcores->iva.pmic);
if (emif_sdram_type() == EMIF_SDRAM_TYPE_DDR3) {
/* Configure LDO SRAM "magic" bits */
@@ -710,6 +762,7 @@
case OMAP_INIT_CONTEXT_UBOOT_FROM_NOR:
case OMAP_INIT_CONTEXT_UBOOT_AFTER_CH:
enable_basic_clocks();
+ timer_init();
scale_vcores(*omap_vcores);
setup_dplls();
#ifdef CONFIG_SYS_CLOCKS_ENABLE_ALL
@@ -725,3 +778,13 @@
if (OMAP_INIT_CONTEXT_SPL != omap_hw_init_context())
enable_basic_uboot_clocks();
}
+
+void gpi2c_init(void)
+{
+ static int gpi2c = 1;
+
+ if (gpi2c) {
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+ gpi2c = 0;
+ }
+}
diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c
index 11e830a..9ede3f5 100644
--- a/arch/arm/cpu/armv7/omap-common/emif-common.c
+++ b/arch/arm/cpu/armv7/omap-common/emif-common.c
@@ -27,7 +27,7 @@
#include <common.h>
#include <asm/emif.h>
-#include <asm/arch/clocks.h>
+#include <asm/arch/clock.h>
#include <asm/arch/sys_proto.h>
#include <asm/omap_common.h>
#include <asm/utils.h>
@@ -209,7 +209,8 @@
writel(regs->temp_alert_config, &emif->emif_temp_alert_config);
writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw);
- if (omap_revision() >= OMAP5430_ES1_0) {
+ if ((omap_revision() >= OMAP5430_ES1_0) ||
+ (omap_revision() == DRA752_ES1_0)) {
writel(EMIF_L3_CONFIG_VAL_SYS_10_MPU_5_LL_0,
&emif->emif_l3_config);
} else if (omap_revision() >= OMAP4460_ES1_0) {
@@ -263,6 +264,18 @@
__udelay(130);
}
+static void ddr3_sw_leveling(u32 base, const struct emif_regs *regs)
+{
+ struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
+
+ writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1);
+ writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw);
+ config_data_eye_leveling_samples(base);
+
+ writel(regs->emif_rd_wr_lvl_ctl, &emif->emif_rd_wr_lvl_ctl);
+ writel(regs->sdram_config, &emif->emif_sdram_config);
+}
+
static void ddr3_init(u32 base, const struct emif_regs *regs)
{
struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
@@ -273,6 +286,7 @@
* defined, contents of mode Registers must be fully initialized.
* H/W takes care of this initialization
*/
+ writel(regs->sdram_config2, &emif->emif_lpddr2_nvm_config);
writel(regs->sdram_config_init, &emif->emif_sdram_config);
writel(regs->emif_ddr_phy_ctlr_1_init, &emif->emif_ddr_phy_ctrl_1);
@@ -290,7 +304,10 @@
/* enable leveling */
writel(regs->emif_rd_wr_lvl_rmp_ctl, &emif->emif_rd_wr_lvl_rmp_ctl);
- ddr3_leveling(base, regs);
+ if (omap_revision() == DRA752_ES1_0)
+ ddr3_sw_leveling(base, regs);
+ else
+ ddr3_leveling(base, regs);
}
#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
@@ -1078,7 +1095,10 @@
if (warm_reset() && (emif_sdram_type() == EMIF_SDRAM_TYPE_DDR3)) {
set_lpmode_selfrefresh(base);
emif_reset_phy(base);
- ddr3_leveling(base, regs);
+ if (omap_revision() == DRA752_ES1_0)
+ ddr3_sw_leveling(base, regs);
+ else
+ ddr3_leveling(base, regs);
}
/* Write to the shadow registers */
@@ -1180,6 +1200,9 @@
/* TRAP for invalid TILER mappings in section 0 */
lis_map_regs_calculated.dmm_lisa_map_0 = DMM_LISA_MAP_0_INVAL_ADDR_TRAP;
+ if (omap_revision() >= OMAP4460_ES1_0)
+ lis_map_regs_calculated.is_ma_present = 1;
+
lisa_map_regs = &lis_map_regs_calculated;
#endif
struct dmm_lisa_map_regs *hw_lisa_map_regs =
diff --git a/arch/arm/cpu/armv7/omap-common/hwinit-common.c b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
index 1645120..5df116e 100644
--- a/arch/arm/cpu/armv7/omap-common/hwinit-common.c
+++ b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
@@ -84,7 +84,7 @@
return rev;
}
-void omap_rev_string(void)
+static void omap_rev_string(void)
{
u32 omap_rev = omap_revision();
u32 soc_variant = (omap_rev & 0xF0000000) >> 28;
@@ -111,42 +111,6 @@
{
}
-static void save_omap_boot_params(void)
-{
- u32 rom_params = *((u32 *)OMAP_SRAM_SCRATCH_BOOT_PARAMS);
- u8 boot_device;
- u32 dev_desc, dev_data;
-
- if ((rom_params < NON_SECURE_SRAM_START) ||
- (rom_params > NON_SECURE_SRAM_END))
- return;
-
- /*
- * rom_params can be type casted to omap_boot_parameters and
- * used. But it not correct to assume that romcode structure
- * encoding would be same as u-boot. So use the defined offsets.
- */
- gd->arch.omap_boot_params.omap_bootdevice = boot_device =
- *((u8 *)(rom_params + BOOT_DEVICE_OFFSET));
-
- gd->arch.omap_boot_params.ch_flags =
- *((u8 *)(rom_params + CH_FLAGS_OFFSET));
-
- if ((boot_device >= MMC_BOOT_DEVICES_START) &&
- (boot_device <= MMC_BOOT_DEVICES_END)) {
- if ((omap_hw_init_context() ==
- OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL)) {
- gd->arch.omap_boot_params.omap_bootmode =
- *((u8 *)(rom_params + BOOT_MODE_OFFSET));
- } else {
- dev_desc = *((u32 *)(rom_params + DEV_DESC_PTR_OFFSET));
- dev_data = *((u32 *)(dev_desc + DEV_DATA_PTR_OFFSET));
- gd->arch.omap_boot_params.omap_bootmode =
- *((u32 *)(dev_data + BOOT_MODE_OFFSET));
- }
- }
-}
-
#ifdef CONFIG_ARCH_CPU_INIT
/*
* SOC specific cpu init
@@ -202,8 +166,6 @@
#endif
prcm_init();
#ifdef CONFIG_SPL_BUILD
- timer_init();
-
/* For regular u-boot sdram_init() is called from dram_init() */
sdram_init();
#endif
diff --git a/arch/arm/cpu/armv7/omap-common/timer.c b/arch/arm/cpu/armv7/omap-common/timer.c
index 507f687..5926a5a 100644
--- a/arch/arm/cpu/armv7/omap-common/timer.c
+++ b/arch/arm/cpu/armv7/omap-common/timer.c
@@ -35,6 +35,7 @@
#include <common.h>
#include <asm/io.h>
#include <asm/arch/cpu.h>
+#include <asm/arch/clock.h>
DECLARE_GLOBAL_DATA_PTR;
diff --git a/arch/arm/cpu/armv7/omap-common/vc.c b/arch/arm/cpu/armv7/omap-common/vc.c
index e6e5f78..a68f1d1 100644
--- a/arch/arm/cpu/armv7/omap-common/vc.c
+++ b/arch/arm/cpu/armv7/omap-common/vc.c
@@ -17,6 +17,7 @@
#include <common.h>
#include <asm/omap_common.h>
#include <asm/arch/sys_proto.h>
+#include <asm/arch/clock.h>
/*
* Define Master code if there are multiple masters on the I2C_SR bus.
@@ -57,7 +58,7 @@
* omap_vc_init() - Initialization for Voltage controller
* @speed_khz: I2C buspeed in KHz
*/
-void omap_vc_init(u16 speed_khz)
+static void omap_vc_init(u16 speed_khz)
{
u32 val;
u32 sys_clk_khz, cycles_hi, cycles_low;
@@ -137,3 +138,14 @@
/* All good.. */
return 0;
}
+
+void sri2c_init(void)
+{
+ static int sri2c = 1;
+
+ if (sri2c) {
+ omap_vc_init(PRM_VC_I2C_CHANNEL_FREQ_KHZ);
+ sri2c = 0;
+ }
+ return;
+}
diff --git a/arch/arm/cpu/armv7/omap3/clock.c b/arch/arm/cpu/armv7/omap3/clock.c
index 09c51f6..81cc859 100644
--- a/arch/arm/cpu/armv7/omap3/clock.c
+++ b/arch/arm/cpu/armv7/omap3/clock.c
@@ -27,7 +27,7 @@
#include <common.h>
#include <asm/io.h>
-#include <asm/arch/clocks.h>
+#include <asm/arch/clock.h>
#include <asm/arch/clocks_omap3.h>
#include <asm/arch/mem.h>
#include <asm/arch/sys_proto.h>
diff --git a/arch/arm/cpu/armv7/omap4/hw_data.c b/arch/arm/cpu/armv7/omap4/hw_data.c
index 06a2fc8..b97cad4 100644
--- a/arch/arm/cpu/armv7/omap4/hw_data.c
+++ b/arch/arm/cpu/armv7/omap4/hw_data.c
@@ -29,7 +29,7 @@
#include <asm/arch/omap.h>
#include <asm/arch/sys_proto.h>
#include <asm/omap_common.h>
-#include <asm/arch/clocks.h>
+#include <asm/arch/clock.h>
#include <asm/omap_gpio.h>
#include <asm/io.h>
@@ -219,6 +219,9 @@
.step = 12660, /* 12.66 mV represented in uV */
/* The code starts at 1 not 0 */
.start_code = 1,
+ .i2c_slave_addr = SMPS_I2C_SLAVE_ADDR,
+ .pmic_bus_init = sri2c_init,
+ .pmic_write = omap_vc_bypass_send_value,
};
struct pmic_data twl6030 = {
@@ -226,6 +229,9 @@
.step = 12660, /* 12.66 mV represented in uV */
/* The code starts at 1 not 0 */
.start_code = 1,
+ .i2c_slave_addr = SMPS_I2C_SLAVE_ADDR,
+ .pmic_bus_init = sri2c_init,
+ .pmic_write = omap_vc_bypass_send_value,
};
struct pmic_data tps62361 = {
@@ -233,7 +239,10 @@
.step = 10000, /* 10 mV represented in uV */
.start_code = 0,
.gpio = TPS62361_VSEL0_GPIO,
- .gpio_en = 1
+ .gpio_en = 1,
+ .i2c_slave_addr = SMPS_I2C_SLAVE_ADDR,
+ .pmic_bus_init = sri2c_init,
+ .pmic_write = omap_vc_bypass_send_value,
};
struct vcores_data omap4430_volts_es1 = {
diff --git a/arch/arm/cpu/armv7/omap4/prcm-regs.c b/arch/arm/cpu/armv7/omap4/prcm-regs.c
index 7225a30..7e71ca0 100644
--- a/arch/arm/cpu/armv7/omap4/prcm-regs.c
+++ b/arch/arm/cpu/armv7/omap4/prcm-regs.c
@@ -301,6 +301,8 @@
.control_ldosram_iva_voltage_ctrl = 0x4A002320,
.control_ldosram_mpu_voltage_ctrl = 0x4A002324,
.control_ldosram_core_voltage_ctrl = 0x4A002328,
+ .control_usbotghs_ctrl = 0x4A00233C,
+ .control_padconf_core_base = 0x4A100000,
.control_pbiaslite = 0x4A100600,
.control_lpddr2io1_0 = 0x4A100638,
.control_lpddr2io1_1 = 0x4A10063C,
@@ -312,4 +314,5 @@
.control_lpddr2io2_3 = 0x4A100654,
.control_efuse_1 = 0x4A100700,
.control_efuse_2 = 0x4A100704,
+ .control_padconf_wkup_base = 0x4A31E000,
};
diff --git a/arch/arm/cpu/armv7/omap5/Makefile b/arch/arm/cpu/armv7/omap5/Makefile
index ce00e2c..6ff8dbb 100644
--- a/arch/arm/cpu/armv7/omap5/Makefile
+++ b/arch/arm/cpu/armv7/omap5/Makefile
@@ -30,6 +30,7 @@
COBJS += sdram.o
COBJS += prcm-regs.o
COBJS += hw_data.o
+COBJS += abb.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
diff --git a/arch/arm/cpu/armv7/omap5/abb.c b/arch/arm/cpu/armv7/omap5/abb.c
new file mode 100644
index 0000000..92470be
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap5/abb.c
@@ -0,0 +1,67 @@
+/*
+ *
+ * Adaptive Body Bias programming sequence for OMAP5 family
+ *
+ * (C) Copyright 2013
+ * Texas Instruments, <www.ti.com>
+ *
+ * Andrii Tseglytskyi <andrii.tseglytskyi@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/omap_common.h>
+#include <asm/io.h>
+
+/*
+ * Setup LDOVBB for OMAP5.
+ * On OMAP5+ some ABB settings are fused. They are handled
+ * in the following way:
+ *
+ * 1. corresponding EFUSE register contains ABB enable bit
+ * and VSET value
+ * 2. If ABB enable bit is set to 1, than ABB should be
+ * enabled, otherwise ABB should be disabled
+ * 3. If ABB is enabled, than VSET value should be copied
+ * to corresponding MUX control register
+ */
+s8 abb_setup_ldovbb(u32 fuse, u32 ldovbb)
+{
+ u32 vset;
+
+ /*
+ * ABB parameters must be properly fused
+ * otherwise ABB should be disabled
+ */
+ vset = readl(fuse);
+ if (!(vset & OMAP5_ABB_FUSE_ENABLE_MASK))
+ return -1;
+
+ /* prepare VSET value for LDOVBB mux register */
+ vset &= OMAP5_ABB_FUSE_VSET_MASK;
+ vset >>= ffs(OMAP5_ABB_FUSE_VSET_MASK) - 1;
+ vset <<= ffs(OMAP5_ABB_LDOVBBMPU_VSET_OUT_MASK) - 1;
+ vset |= OMAP5_ABB_LDOVBBMPU_MUX_CTRL_MASK;
+
+ /* setup LDOVBB using fused value */
+ clrsetbits_le32(ldovbb, OMAP5_ABB_LDOVBBMPU_VSET_OUT_MASK, vset);
+
+ return 0;
+}
diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c
index 604fa42..07b1108 100644
--- a/arch/arm/cpu/armv7/omap5/hw_data.c
+++ b/arch/arm/cpu/armv7/omap5/hw_data.c
@@ -26,10 +26,11 @@
* MA 02111-1307 USA
*/
#include <common.h>
+#include <palmas.h>
#include <asm/arch/omap.h>
#include <asm/arch/sys_proto.h>
#include <asm/omap_common.h>
-#include <asm/arch/clocks.h>
+#include <asm/arch/clock.h>
#include <asm/omap_gpio.h>
#include <asm/io.h>
#include <asm/emif.h>
@@ -99,14 +100,13 @@
};
static const struct dpll_params mpu_dpll_params_1ghz[NUM_SYS_CLKS] = {
- {250, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
- {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
- {119, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
- {625, 11, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
- {500, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
+ {250, 2, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
+ {500, 9, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */
+ {119, 1, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
+ {625, 11, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
+ {500, 12, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
- {625, 23, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */
- {50, 0, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 20 MHz */
+ {625, 23, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */
};
static const struct dpll_params
@@ -132,15 +132,14 @@
};
static const struct dpll_params
- core_dpll_params_2128mhz_ddr532_dra7xx[NUM_SYS_CLKS] = {
- {266, 2, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6}, /* 12 MHz */
- {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
- {443, 6, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6}, /* 16.8 MHz */
- {277, 4, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6}, /* 19.2 MHz */
- {368, 8, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6}, /* 26 MHz */
+ core_dpll_params_2128mhz_dra7xx[NUM_SYS_CLKS] = {
+ {266, 2, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 12 MHz */
+ {266, 4, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 20 MHz */
+ {443, 6, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 16.8 MHz */
+ {277, 4, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 19.2 MHz */
+ {368, 8, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 26 MHz */
{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
- {277, 9, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6}, /* 38.4 MHz */
- {266, 4, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6} /* 20 MHz */
+ {277, 9, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 38.4 MHz */
};
static const struct dpll_params
@@ -186,14 +185,13 @@
};
static const struct dpll_params per_dpll_params_768mhz_dra7xx[NUM_SYS_CLKS] = {
- {32, 0, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 12 MHz */
- {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
- {160, 6, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 16.8 MHz */
- {20, 0, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 19.2 MHz */
- {192, 12, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 26 MHz */
+ {32, 0, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 12 MHz */
+ {96, 4, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 20 MHz */
+ {160, 6, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 16.8 MHz */
+ {20, 0, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 19.2 MHz */
+ {192, 12, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 26 MHz */
{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
- {10, 0, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 38.4 MHz */
- {96, 4, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1} /* 20 MHz */
+ {10, 0, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 38.4 MHz */
};
static const struct dpll_params iva_dpll_params_2330mhz[NUM_SYS_CLKS] = {
@@ -206,6 +204,16 @@
{91, 2, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
};
+static const struct dpll_params iva_dpll_params_2330mhz_dra7xx[NUM_SYS_CLKS] = {
+ {1165, 11, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
+ {233, 3, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */
+ {208, 2, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
+ {182, 2, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
+ {224, 4, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
+ {91, 2, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */
+};
+
/* ABE M & N values with sys_clk as source */
static const struct dpll_params
abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = {
@@ -223,26 +231,36 @@
750, 0, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1
};
+/* ABE M & N values with sysclk2(22.5792 MHz) as input */
+static const struct dpll_params
+ abe_dpll_params_sysclk2_361267khz[NUM_SYS_CLKS] = {
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
+ {16, 1, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */
+};
+
static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = {
{400, 4, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
- {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
+ {480, 9, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */
{400, 6, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
{400, 7, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
{480, 12, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
{400, 15, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */
- {48, 0, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 20 MHz */
};
-static const struct dpll_params ddr_dpll_params_1066mhz[NUM_SYS_CLKS] = {
- {533, 11, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
- {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
- {222, 6, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
- {111, 3, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
- {41, 1, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
+static const struct dpll_params ddr_dpll_params_2128mhz[NUM_SYS_CLKS] = {
+ {266, 2, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
+ {266, 4, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */
+ {190, 2, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
+ {665, 11, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
+ {532, 12, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
- {347, 24, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */
- {533, 19, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1} /* 20 MHz */
+ {665, 23, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */
};
struct dplls omap5_dplls_es1 = {
@@ -275,10 +293,12 @@
struct dplls dra7xx_dplls = {
.mpu = mpu_dpll_params_1ghz,
- .core = core_dpll_params_2128mhz_ddr532_dra7xx,
+ .core = core_dpll_params_2128mhz_dra7xx,
.per = per_dpll_params_768mhz_dra7xx,
+ .abe = abe_dpll_params_sysclk2_361267khz,
+ .iva = iva_dpll_params_2330mhz_dra7xx,
.usb = usb_dpll_params_1920mhz,
- .ddr = ddr_dpll_params_1066mhz,
+ .ddr = ddr_dpll_params_2128mhz,
};
struct pmic_data palmas = {
@@ -289,6 +309,22 @@
* Offset code 0 switches OFF the SMPS
*/
.start_code = 6,
+ .i2c_slave_addr = SMPS_I2C_SLAVE_ADDR,
+ .pmic_bus_init = sri2c_init,
+ .pmic_write = omap_vc_bypass_send_value,
+};
+
+struct pmic_data tps659038 = {
+ .base_offset = PALMAS_SMPS_BASE_VOLT_UV,
+ .step = 10000, /* 10 mV represented in uV */
+ /*
+ * Offset codes 1-6 all give the base voltage in Palmas
+ * Offset code 0 switches OFF the SMPS
+ */
+ .start_code = 6,
+ .i2c_slave_addr = TPS659038_I2C_SLAVE_ADDR,
+ .pmic_bus_init = gpi2c_init,
+ .pmic_write = palmas_i2c_write_u8,
};
struct vcores_data omap5430_volts = {
@@ -319,6 +355,38 @@
.mm.pmic = &palmas,
};
+struct vcores_data dra752_volts = {
+ .mpu.value = VDD_MPU_DRA752,
+ .mpu.efuse.reg = STD_FUSE_OPP_VMIN_MPU_NOM,
+ .mpu.efuse.reg_bits = DRA752_EFUSE_REGBITS,
+ .mpu.addr = TPS659038_REG_ADDR_SMPS12_MPU,
+ .mpu.pmic = &tps659038,
+
+ .eve.value = VDD_EVE_DRA752,
+ .eve.efuse.reg = STD_FUSE_OPP_VMIN_DSPEVE_NOM,
+ .eve.efuse.reg_bits = DRA752_EFUSE_REGBITS,
+ .eve.addr = TPS659038_REG_ADDR_SMPS45_EVE,
+ .eve.pmic = &tps659038,
+
+ .gpu.value = VDD_GPU_DRA752,
+ .gpu.efuse.reg = STD_FUSE_OPP_VMIN_GPU_NOM,
+ .gpu.efuse.reg_bits = DRA752_EFUSE_REGBITS,
+ .gpu.addr = TPS659038_REG_ADDR_SMPS6_GPU,
+ .gpu.pmic = &tps659038,
+
+ .core.value = VDD_CORE_DRA752,
+ .core.efuse.reg = STD_FUSE_OPP_VMIN_CORE_NOM,
+ .core.efuse.reg_bits = DRA752_EFUSE_REGBITS,
+ .core.addr = TPS659038_REG_ADDR_SMPS7_CORE,
+ .core.pmic = &tps659038,
+
+ .iva.value = VDD_IVA_DRA752,
+ .iva.efuse.reg = STD_FUSE_OPP_VMIN_IVA_NOM,
+ .iva.efuse.reg_bits = DRA752_EFUSE_REGBITS,
+ .iva.addr = TPS659038_REG_ADDR_SMPS8_IVA,
+ .iva.pmic = &tps659038,
+};
+
/*
* Enable essential clock domains, modules and
* do some additional special settings needed
@@ -344,6 +412,8 @@
(*prcm)->cm_l4per_gpio4_clkctrl,
(*prcm)->cm_l4per_gpio5_clkctrl,
(*prcm)->cm_l4per_gpio6_clkctrl,
+ (*prcm)->cm_l4per_gpio7_clkctrl,
+ (*prcm)->cm_l4per_gpio8_clkctrl,
0
};
@@ -383,12 +453,6 @@
clk_modules_explicit_en_essential,
1);
- /* Select 384Mhz for GPU as its the POR for ES1.0 */
- setbits_le32((*prcm)->cm_sgx_sgx_clkctrl,
- CLKSEL_GPU_HYD_GCLK_MASK);
- setbits_le32((*prcm)->cm_sgx_sgx_clkctrl,
- CLKSEL_GPU_CORE_GCLK_MASK);
-
/* Enable SCRM OPT clocks for PER and CORE dpll */
setbits_le32((*prcm)->cm_wkupaon_scrm_clkctrl,
OPTFCLKEN_SCRM_PER_MASK);
@@ -540,6 +604,17 @@
.ctrl_emif_sdram_config_ext = SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES,
};
+const struct ctrl_ioregs ioregs_dra7xx_es1 = {
+ .ctrl_ddrch = 0x40404040,
+ .ctrl_lpddr2ch = 0x40404040,
+ .ctrl_ddr3ch = 0x80808080,
+ .ctrl_ddrio_0 = 0xbae8c631,
+ .ctrl_ddrio_1 = 0xb46318d8,
+ .ctrl_ddrio_2 = 0x84210000,
+ .ctrl_emif_sdram_config_ext = 0xb2c00000,
+ .ctrl_ddr_ctrl_ext_0 = 0xA2000000,
+};
+
void hw_data_init(void)
{
u32 omap_rev = omap_revision();
@@ -565,7 +640,7 @@
case DRA752_ES1_0:
*prcm = &dra7xx_prcm;
*dplls_data = &dra7xx_dplls;
- *omap_vcores = &omap5430_volts_es2;
+ *omap_vcores = &dra752_volts;
*ctrl = &dra7xx_ctrl;
break;
@@ -582,14 +657,16 @@
case OMAP5430_ES1_0:
case OMAP5430_ES2_0:
*regs = &ioregs_omap5430;
- break;
+ break;
case OMAP5432_ES1_0:
*regs = &ioregs_omap5432_es1;
- break;
+ break;
case OMAP5432_ES2_0:
- case DRA752_ES1_0:
*regs = &ioregs_omap5432_es2;
- break;
+ break;
+ case DRA752_ES1_0:
+ *regs = &ioregs_dra7xx_es1;
+ break;
default:
printf("\n INVALID OMAP REVISION ");
diff --git a/arch/arm/cpu/armv7/omap5/hwinit.c b/arch/arm/cpu/armv7/omap5/hwinit.c
index e192fea..11ba36b 100644
--- a/arch/arm/cpu/armv7/omap5/hwinit.c
+++ b/arch/arm/cpu/armv7/omap5/hwinit.c
@@ -32,7 +32,7 @@
#include <asm/armv7.h>
#include <asm/arch/cpu.h>
#include <asm/arch/sys_proto.h>
-#include <asm/arch/clocks.h>
+#include <asm/arch/clock.h>
#include <asm/sizes.h>
#include <asm/utils.h>
#include <asm/arch/gpio.h>
@@ -43,13 +43,15 @@
u32 *const omap_si_rev = (u32 *)OMAP_SRAM_SCRATCH_OMAP_REV;
-static struct gpio_bank gpio_bank_54xx[6] = {
+static struct gpio_bank gpio_bank_54xx[8] = {
{ (void *)OMAP54XX_GPIO1_BASE, METHOD_GPIO_24XX },
{ (void *)OMAP54XX_GPIO2_BASE, METHOD_GPIO_24XX },
{ (void *)OMAP54XX_GPIO3_BASE, METHOD_GPIO_24XX },
{ (void *)OMAP54XX_GPIO4_BASE, METHOD_GPIO_24XX },
{ (void *)OMAP54XX_GPIO5_BASE, METHOD_GPIO_24XX },
{ (void *)OMAP54XX_GPIO6_BASE, METHOD_GPIO_24XX },
+ { (void *)OMAP54XX_GPIO7_BASE, METHOD_GPIO_24XX },
+ { (void *)OMAP54XX_GPIO8_BASE, METHOD_GPIO_24XX },
};
const struct gpio_bank *const omap_gpio_bank = gpio_bank_54xx;
@@ -100,16 +102,21 @@
writel(ioregs->ctrl_emif_sdram_config_ext,
(*ctrl)->control_emif2_sdram_config_ext);
- /* Disable DLL select */
- io_settings = (readl((*ctrl)->control_port_emif1_sdram_config)
+ if (is_omap54xx()) {
+ /* Disable DLL select */
+ io_settings = (readl((*ctrl)->control_port_emif1_sdram_config)
& 0xFFEFFFFF);
- writel(io_settings,
- (*ctrl)->control_port_emif1_sdram_config);
+ writel(io_settings,
+ (*ctrl)->control_port_emif1_sdram_config);
- io_settings = (readl((*ctrl)->control_port_emif2_sdram_config)
+ io_settings = (readl((*ctrl)->control_port_emif2_sdram_config)
& 0xFFEFFFFF);
- writel(io_settings,
- (*ctrl)->control_port_emif2_sdram_config);
+ writel(io_settings,
+ (*ctrl)->control_port_emif2_sdram_config);
+ } else {
+ writel(ioregs->ctrl_ddr_ctrl_ext_0,
+ (*ctrl)->control_ddr_control_ext_0);
+ }
}
/*
@@ -201,6 +208,9 @@
u32 sysclk_ind = get_sys_clk_index();
u32 omap_rev = omap_revision();
+ if (!is_omap54xx())
+ return;
+
mul_factor = srcomp_parameters[sysclk_ind].multiply_factor;
div_factor = srcomp_parameters[sysclk_ind].divide_factor;
diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/cpu/armv7/omap5/prcm-regs.c
index e9f6a32..e839ff5 100644
--- a/arch/arm/cpu/armv7/omap5/prcm-regs.c
+++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c
@@ -298,6 +298,7 @@
.cm_wkupaon_io_srcomp_clkctrl = 0x4ae07898,
.prm_rstctrl = 0x4ae07b00,
.prm_rstst = 0x4ae07b04,
+ .prm_rsttime = 0x4ae07b08,
.prm_vc_val_bypass = 0x4ae07ba0,
.prm_vc_cfg_i2c_mode = 0x4ae07bb4,
.prm_vc_cfg_i2c_clk = 0x4ae07bb8,
@@ -307,10 +308,16 @@
.prm_sldo_mpu_ctrl = 0x4ae07bd0,
.prm_sldo_mm_setup = 0x4ae07bd4,
.prm_sldo_mm_ctrl = 0x4ae07bd8,
+
+ /* SCRM stuff, used by some boards */
+ .scrm_auxclk0 = 0x4ae0a310,
+ .scrm_auxclk1 = 0x4ae0a314,
};
struct omap_sys_ctrl_regs const omap5_ctrl = {
.control_status = 0x4A002134,
+ .control_std_fuse_opp_vdd_mpu_2 = 0x4A0021B4,
+ .control_padconf_core_base = 0x4A002800,
.control_paconf_global = 0x4A002DA0,
.control_paconf_mode = 0x4A002DA4,
.control_smart1io_padconf_0 = 0x4A002DA8,
@@ -358,6 +365,8 @@
.control_port_emif2_sdram_config = 0x4AE0C118,
.control_emif1_sdram_config_ext = 0x4AE0C144,
.control_emif2_sdram_config_ext = 0x4AE0C148,
+ .control_wkup_ldovbb_mpu_voltage_ctrl = 0x4AE0C318,
+ .control_padconf_wkup_base = 0x4AE0C800,
.control_smart1nopmio_padconf_0 = 0x4AE0CDA0,
.control_smart1nopmio_padconf_1 = 0x4AE0CDA4,
.control_padconf_mode = 0x4AE0CDA8,
@@ -434,6 +443,7 @@
.control_srcomp_east_side = 0x4A002E7C,
.control_srcomp_west_side = 0x4A002E80,
.control_srcomp_code_latch = 0x4A002E84,
+ .control_ddr_control_ext_0 = 0x4A002E88,
.control_padconf_core_base = 0x4A003400,
.control_port_emif1_sdram_config = 0x4AE0C110,
.control_port_emif1_lpddr2_nvm_config = 0x4AE0C114,
@@ -709,6 +719,9 @@
.cm_l3init_fsusb_clkctrl = 0x4a0096d0,
.cm_l3init_ocp2scp1_clkctrl = 0x4a0096e0,
+ /* prm irqstatus regs */
+ .prm_irqstatus_mpu_2 = 0x4ae06014,
+
/* l4 wkup regs */
.cm_abe_pll_ref_clksel = 0x4ae0610c,
.cm_sys_clksel = 0x4ae06110,
@@ -740,6 +753,12 @@
.prm_sldo_mpu_ctrl = 0x4ae07cd0,
.prm_sldo_mm_setup = 0x4ae07cd4,
.prm_sldo_mm_ctrl = 0x4ae07cd8,
+ .prm_abbldo_mpu_setup = 0x4ae07cdc,
+ .prm_abbldo_mpu_ctrl = 0x4ae07ce0,
+
+ /* SCRM stuff, used by some boards */
+ .scrm_auxclk0 = 0x4ae0a310,
+ .scrm_auxclk1 = 0x4ae0a314,
};
struct prcm_regs const dra7xx_prcm = {
@@ -941,6 +960,7 @@
/* l4 wkup regs */
.cm_abe_pll_ref_clksel = 0x4ae0610c,
.cm_sys_clksel = 0x4ae06110,
+ .cm_abe_pll_sys_clksel = 0x4ae06118,
.cm_wkup_clkstctrl = 0x4ae07800,
.cm_wkup_l4wkup_clkctrl = 0x4ae07820,
.cm_wkup_wdtimer1_clkctrl = 0x4ae07828,
diff --git a/arch/arm/cpu/armv7/omap5/sdram.c b/arch/arm/cpu/armv7/omap5/sdram.c
index 6b461e4..1b445a6 100644
--- a/arch/arm/cpu/armv7/omap5/sdram.c
+++ b/arch/arm/cpu/armv7/omap5/sdram.c
@@ -108,6 +108,7 @@
const struct emif_regs emif_regs_ddr3_532_mhz_1cs = {
.sdram_config_init = 0x61851B32,
.sdram_config = 0x61851B32,
+ .sdram_config2 = 0x0,
.ref_ctrl = 0x00001035,
.sdram_tim1 = 0xCCCF36B3,
.sdram_tim2 = 0x308F7FDA,
@@ -131,6 +132,7 @@
const struct emif_regs emif_regs_ddr3_532_mhz_1cs_es2 = {
.sdram_config_init = 0x61851B32,
.sdram_config = 0x61851B32,
+ .sdram_config2 = 0x0,
.ref_ctrl = 0x00001035,
.sdram_tim1 = 0xCCCF36B3,
.sdram_tim2 = 0x308F7FDA,
@@ -151,6 +153,54 @@
.emif_rd_wr_exec_thresh = 0x40000305
};
+const struct emif_regs emif_1_regs_ddr3_532_mhz_1cs_dra_es1 = {
+ .sdram_config_init = 0x61851ab2,
+ .sdram_config = 0x61851ab2,
+ .sdram_config2 = 0x08000000,
+ .ref_ctrl = 0x00001035,
+ .sdram_tim1 = 0xCCCF36B3,
+ .sdram_tim2 = 0x308F7FDA,
+ .sdram_tim3 = 0x027F88A8,
+ .read_idle_ctrl = 0x00050000,
+ .zq_config = 0x0007190B,
+ .temp_alert_config = 0x00000000,
+ .emif_ddr_phy_ctlr_1_init = 0x0E20400A,
+ .emif_ddr_phy_ctlr_1 = 0x0E24400A,
+ .emif_ddr_ext_phy_ctrl_1 = 0x04040100,
+ .emif_ddr_ext_phy_ctrl_2 = 0x009E009E,
+ .emif_ddr_ext_phy_ctrl_3 = 0x009E009E,
+ .emif_ddr_ext_phy_ctrl_4 = 0x009E009E,
+ .emif_ddr_ext_phy_ctrl_5 = 0x009E009E,
+ .emif_rd_wr_lvl_rmp_win = 0x00000000,
+ .emif_rd_wr_lvl_rmp_ctl = 0x80000000,
+ .emif_rd_wr_lvl_ctl = 0x00000000,
+ .emif_rd_wr_exec_thresh = 0x00000305
+};
+
+const struct emif_regs emif_2_regs_ddr3_532_mhz_1cs_dra_es1 = {
+ .sdram_config_init = 0x61851B32,
+ .sdram_config = 0x61851B32,
+ .sdram_config2 = 0x08000000,
+ .ref_ctrl = 0x00001035,
+ .sdram_tim1 = 0xCCCF36B3,
+ .sdram_tim2 = 0x308F7FDA,
+ .sdram_tim3 = 0x027F88A8,
+ .read_idle_ctrl = 0x00050000,
+ .zq_config = 0x0007190B,
+ .temp_alert_config = 0x00000000,
+ .emif_ddr_phy_ctlr_1_init = 0x0020400A,
+ .emif_ddr_phy_ctlr_1 = 0x0E24400A,
+ .emif_ddr_ext_phy_ctrl_1 = 0x04040100,
+ .emif_ddr_ext_phy_ctrl_2 = 0x009D009D,
+ .emif_ddr_ext_phy_ctrl_3 = 0x009D009D,
+ .emif_ddr_ext_phy_ctrl_4 = 0x009D009D,
+ .emif_ddr_ext_phy_ctrl_5 = 0x009D009D,
+ .emif_rd_wr_lvl_rmp_win = 0x00000000,
+ .emif_rd_wr_lvl_rmp_ctl = 0x80000000,
+ .emif_rd_wr_lvl_ctl = 0x00000000,
+ .emif_rd_wr_exec_thresh = 0x00000305
+};
+
const struct dmm_lisa_map_regs lisa_map_4G_x_2_x_2 = {
.dmm_lisa_map_0 = 0x0,
.dmm_lisa_map_1 = 0x0,
@@ -159,11 +209,39 @@
.is_ma_present = 0x1
};
-const struct dmm_lisa_map_regs lisa_map_512M_x_1 = {
+/*
+ * DRA752 EVM board has 1.5 GB of memory
+ * EMIF1 --> 2Gb * 2 = 512MB
+ * EMIF2 --> 2Gb * 4 = 1GB
+ * so mapping 1GB interleaved and 512MB non-interleaved
+ */
+const struct dmm_lisa_map_regs lisa_map_2G_x_2_x_2_2G_x_1_x_2 = {
+ .dmm_lisa_map_0 = 0x0,
+ .dmm_lisa_map_1 = 0x80640300,
+ .dmm_lisa_map_2 = 0xC0500220,
+ .dmm_lisa_map_3 = 0xFF020100,
+ .is_ma_present = 0x1
+};
+
+/*
+ * DRA752 EVM EMIF1 ONLY CONFIGURATION
+ */
+const struct dmm_lisa_map_regs lisa_map_2G_x_1_x_2 = {
.dmm_lisa_map_0 = 0x0,
.dmm_lisa_map_1 = 0x0,
- .dmm_lisa_map_2 = 0x0,
- .dmm_lisa_map_3 = 0x80500100,
+ .dmm_lisa_map_2 = 0x80500100,
+ .dmm_lisa_map_3 = 0xFF020100,
+ .is_ma_present = 0x1
+};
+
+/*
+ * DRA752 EVM EMIF2 ONLY CONFIGURATION
+ */
+const struct dmm_lisa_map_regs lisa_map_2G_x_2_x_2 = {
+ .dmm_lisa_map_0 = 0x0,
+ .dmm_lisa_map_1 = 0x0,
+ .dmm_lisa_map_2 = 0x80600200,
+ .dmm_lisa_map_3 = 0xFF020100,
.is_ma_present = 0x1
};
@@ -180,9 +258,20 @@
*regs = &emif_regs_532_mhz_2cs_es2;
break;
case OMAP5432_ES2_0:
- case DRA752_ES1_0:
- default:
*regs = &emif_regs_ddr3_532_mhz_1cs_es2;
+ break;
+ case DRA752_ES1_0:
+ switch (emif_nr) {
+ case 1:
+ *regs = &emif_1_regs_ddr3_532_mhz_1cs_dra_es1;
+ break;
+ case 2:
+ *regs = &emif_2_regs_ddr3_532_mhz_1cs_dra_es1;
+ break;
+ }
+ break;
+ default:
+ *regs = &emif_1_regs_ddr3_532_mhz_1cs_dra_es1;
}
}
@@ -201,7 +290,7 @@
break;
case DRA752_ES1_0:
default:
- *dmm_lisa_regs = &lisa_map_512M_x_1;
+ *dmm_lisa_regs = &lisa_map_2G_x_2_x_2_2G_x_1_x_2;
}
}
@@ -252,7 +341,8 @@
0x00000000,
0x00000000,
0x00000000,
- 0x00000077
+ 0x00000077,
+ 0x0
};
const u32 ddr3_ext_phy_ctrl_const_base_es1[EMIF_EXT_PHY_CTRL_CONST_REG] = {
@@ -274,7 +364,8 @@
0x00000000,
0x00000000,
0x00000000,
- 0x00000057
+ 0x00000057,
+ 0x0
};
const u32 ddr3_ext_phy_ctrl_const_base_es2[EMIF_EXT_PHY_CTRL_CONST_REG] = {
@@ -296,7 +387,56 @@
0x00000000,
0x00000000,
0x00000000,
- 0x00000057
+ 0x00000057,
+ 0x0
+};
+
+const u32
+dra_ddr3_ext_phy_ctrl_const_base_es1_emif1[EMIF_EXT_PHY_CTRL_CONST_REG] = {
+ 0x009E009E,
+ 0x002E002E,
+ 0x002E002E,
+ 0x002E002E,
+ 0x002E002E,
+ 0x002E002E,
+ 0x004D004D,
+ 0x004D004D,
+ 0x004D004D,
+ 0x004D004D,
+ 0x004D004D,
+ 0x004D004D,
+ 0x004D004D,
+ 0x004D004D,
+ 0x004D004D,
+ 0x004D004D,
+ 0x0,
+ 0x600020,
+ 0x40010080,
+ 0x8102040
+};
+
+const u32
+dra_ddr3_ext_phy_ctrl_const_base_es1_emif2[EMIF_EXT_PHY_CTRL_CONST_REG] = {
+ 0x009D009D,
+ 0x002D002D,
+ 0x002D002D,
+ 0x002D002D,
+ 0x002D002D,
+ 0x002D002D,
+ 0x00570057,
+ 0x00570057,
+ 0x00570057,
+ 0x00570057,
+ 0x00570057,
+ 0x00570057,
+ 0x00570057,
+ 0x00570057,
+ 0x00570057,
+ 0x00570057,
+ 0x0,
+ 0x600020,
+ 0x40010080,
+ 0x8102040
};
const struct lpddr2_mr_regs mr_regs = {
@@ -307,7 +447,7 @@
.mr16 = MR16_REF_FULL_ARRAY
};
-static void emif_get_ext_phy_ctrl_const_regs(const u32 **regs)
+static void emif_get_ext_phy_ctrl_const_regs(u32 emif_nr, const u32 **regs)
{
switch (omap_revision()) {
case OMAP5430_ES1_0:
@@ -318,7 +458,14 @@
*regs = ddr3_ext_phy_ctrl_const_base_es1;
break;
case OMAP5432_ES2_0:
+ *regs = ddr3_ext_phy_ctrl_const_base_es2;
+ break;
case DRA752_ES1_0:
+ if (emif_nr == 1)
+ *regs = dra_ddr3_ext_phy_ctrl_const_base_es1_emif1;
+ else
+ *regs = dra_ddr3_ext_phy_ctrl_const_base_es1_emif2;
+ break;
default:
*regs = ddr3_ext_phy_ctrl_const_base_es2;
@@ -334,9 +481,12 @@
{
u32 *ext_phy_ctrl_base = 0;
u32 *emif_ext_phy_ctrl_base = 0;
+ u32 emif_nr;
const u32 *ext_phy_ctrl_const_regs;
u32 i = 0;
+ emif_nr = (base == EMIF1_BASE) ? 1 : 2;
+
struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
ext_phy_ctrl_base = (u32 *) &(regs->emif_ddr_ext_phy_ctrl_1);
@@ -353,7 +503,7 @@
* external phy 6-24 registers do not change with
* ddr frequency
*/
- emif_get_ext_phy_ctrl_const_regs(&ext_phy_ctrl_const_regs);
+ emif_get_ext_phy_ctrl_const_regs(emif_nr, &ext_phy_ctrl_const_regs);
for (i = 0; i < EMIF_EXT_PHY_CTRL_CONST_REG; i++) {
writel(ext_phy_ctrl_const_regs[i],
emif_ext_phy_ctrl_base++);
diff --git a/arch/arm/cpu/armv7/s5p-common/Makefile b/arch/arm/cpu/armv7/s5p-common/Makefile
index 1705399..0c38bd0 100644
--- a/arch/arm/cpu/armv7/s5p-common/Makefile
+++ b/arch/arm/cpu/armv7/s5p-common/Makefile
@@ -26,9 +26,11 @@
LIB = $(obj)libs5p-common.o
COBJS-y += cpu_info.o
+ifndef CONFIG_SPL_BUILD
COBJS-y += timer.o
COBJS-y += sromc.o
COBJS-$(CONFIG_PWM) += pwm.o
+endif
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS-y) $(SOBJS))
diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S
index e9e57e6..8e9cb19 100644
--- a/arch/arm/cpu/armv7/start.S
+++ b/arch/arm/cpu/armv7/start.S
@@ -94,10 +94,6 @@
_bss_start_ofs:
.word __bss_start - _start
-.globl _image_copy_end_ofs
-_image_copy_end_ofs:
- .word __image_copy_end - _start
-
.globl _bss_end_ofs
_bss_end_ofs:
.word __bss_end - _start
@@ -167,80 +163,6 @@
/*------------------------------------------------------------------------------*/
-#ifndef CONFIG_SPL_BUILD
-/*
- * void relocate_code(addr_moni)
- *
- * This function relocates the monitor code.
- */
-ENTRY(relocate_code)
- mov r6, r0 /* save addr of destination */
-
- adr r0, _start
- subs r9, r6, r0 /* r9 <- relocation offset */
- beq relocate_done /* skip relocation */
- mov r1, r6 /* r1 <- scratch for copy_loop */
- ldr r3, _image_copy_end_ofs
- add r2, r0, r3 /* r2 <- source end address */
-
-copy_loop:
- ldmia r0!, {r10-r11} /* copy from source address [r0] */
- stmia r1!, {r10-r11} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- blo copy_loop
-
- /*
- * fix .rel.dyn relocations
- */
- ldr r0, _TEXT_BASE /* r0 <- Text base */
- ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
- add r10, r10, r0 /* r10 <- sym table in FLASH */
- ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
- add r2, r2, r0 /* r2 <- rel dyn start in FLASH */
- ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
- add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
-fixloop:
- ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
- add r0, r0, r9 /* r0 <- location to fix up in RAM */
- ldr r1, [r2, #4]
- and r7, r1, #0xff
- cmp r7, #23 /* relative fixup? */
- beq fixrel
- cmp r7, #2 /* absolute fixup? */
- beq fixabs
- /* ignore unknown type of fixup */
- b fixnext
-fixabs:
- /* absolute fix: set location to (offset) symbol value */
- mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
- add r1, r10, r1 /* r1 <- address of symbol in table */
- ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r1, r9 /* r1 <- relocated sym addr */
- b fixnext
-fixrel:
- /* relative fix: increase location by offset */
- ldr r1, [r0]
- add r1, r1, r9
-fixnext:
- str r1, [r0]
- add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
- cmp r2, r3
- blo fixloop
-
-relocate_done:
-
- bx lr
-
-_rel_dyn_start_ofs:
- .word __rel_dyn_start - _start
-_rel_dyn_end_ofs:
- .word __rel_dyn_end - _start
-_dynsym_start_ofs:
- .word __dynsym_start - _start
-ENDPROC(relocate_code)
-
-#endif
-
ENTRY(c_runtime_cpu_setup)
/*
* If I-cache is enabled invalidate it
diff --git a/arch/arm/cpu/ixp/config.mk b/arch/arm/cpu/ixp/config.mk
index b02e8af..fd3c29f 100644
--- a/arch/arm/cpu/ixp/config.mk
+++ b/arch/arm/cpu/ixp/config.mk
@@ -31,10 +31,6 @@
PLATFORM_LDFLAGS += -EB
USE_PRIVATE_LIBGCC = yes
-# -fdata-sections triggers "section .bss overlaps section .rel.dyn" linker error
-PLATFORM_RELFLAGS += -ffunction-sections
-LDFLAGS_u-boot += --gc-sections
-
# =========================================================================
#
# Supply options according to compiler version
diff --git a/arch/arm/cpu/ixp/start.S b/arch/arm/cpu/ixp/start.S
index 69ef8aa..46cba0c 100644
--- a/arch/arm/cpu/ixp/start.S
+++ b/arch/arm/cpu/ixp/start.S
@@ -114,10 +114,6 @@
_bss_start_ofs:
.word __bss_start - _start
-.globl _image_copy_end_ofs
-_image_copy_end_ofs:
- .word __image_copy_end - _start
-
.globl _bss_end_ofs
_bss_end_ofs:
.word __bss_end - _start
@@ -257,79 +253,6 @@
/*------------------------------------------------------------------------------*/
-/*
- * void relocate_code(addr_moni)
- *
- * This function relocates the monitor code.
- */
- .globl relocate_code
-relocate_code:
- mov r6, r0 /* save addr of destination */
-
- adr r0, _start
- subs r9, r6, r0 /* r9 <- relocation offset */
- beq relocate_done /* skip relocation */
- mov r1, r6 /* r1 <- scratch for copy_loop */
- ldr r3, _image_copy_end_ofs
- add r2, r0, r3 /* r2 <- source end address */
-
-copy_loop:
- ldmia r0!, {r10-r11} /* copy from source address [r0] */
- stmia r1!, {r10-r11} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- blo copy_loop
-
-#ifndef CONFIG_SPL_BUILD
- /*
- * fix .rel.dyn relocations
- */
- ldr r0, _TEXT_BASE /* r0 <- Text base */
- ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
- add r10, r10, r0 /* r10 <- sym table in FLASH */
- ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
- add r2, r2, r0 /* r2 <- rel dyn start in FLASH */
- ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
- add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
-fixloop:
- ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
- add r0, r0, r9 /* r0 <- location to fix up in RAM */
- ldr r1, [r2, #4]
- and r7, r1, #0xff
- cmp r7, #23 /* relative fixup? */
- beq fixrel
- cmp r7, #2 /* absolute fixup? */
- beq fixabs
- /* ignore unknown type of fixup */
- b fixnext
-fixabs:
- /* absolute fix: set location to (offset) symbol value */
- mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
- add r1, r10, r1 /* r1 <- address of symbol in table */
- ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r1, r9 /* r1 <- relocated sym addr */
- b fixnext
-fixrel:
- /* relative fix: increase location by offset */
- ldr r1, [r0]
- add r1, r1, r9
-fixnext:
- str r1, [r0]
- add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
- cmp r2, r3
- blo fixloop
-#endif
-
-relocate_done:
-
- bx lr
-
-_rel_dyn_start_ofs:
- .word __rel_dyn_start - _start
-_rel_dyn_end_ofs:
- .word __rel_dyn_end - _start
-_dynsym_start_ofs:
- .word __dynsym_start - _start
-
.globl c_runtime_cpu_setup
c_runtime_cpu_setup:
diff --git a/arch/arm/cpu/ixp/u-boot.lds b/arch/arm/cpu/ixp/u-boot.lds
index 553589c..54bafda 100644
--- a/arch/arm/cpu/ixp/u-boot.lds
+++ b/arch/arm/cpu/ixp/u-boot.lds
@@ -31,6 +31,7 @@
. = ALIGN(4);
.text :
{
+ *(.__image_copy_start)
arch/arm/cpu/ixp/start.o(.text*)
*(.text*)
}
@@ -54,17 +55,23 @@
. = ALIGN(4);
- __image_copy_end = .;
-
- .rel.dyn : {
- __rel_dyn_start = .;
- *(.rel*)
- __rel_dyn_end = .;
+ .image_copy_end :
+ {
+ *(.__image_copy_end)
}
- .dynsym : {
- __dynsym_start = .;
- *(.dynsym)
+ .rel_dyn_start :
+ {
+ *(.__rel_dyn_start)
+ }
+
+ .rel.dyn : {
+ *(.rel*)
+ }
+
+ .rel_dyn_end :
+ {
+ *(.__rel_dyn_end)
}
_end = .;
@@ -88,6 +95,7 @@
KEEP(*(.__bss_end));
}
+ /DISCARD/ : { *(.dynsym) }
/DISCARD/ : { *(.dynstr*) }
/DISCARD/ : { *(.dynamic*) }
/DISCARD/ : { *(.plt*) }
diff --git a/arch/arm/cpu/pxa/config.mk b/arch/arm/cpu/pxa/config.mk
index 0bbe295..ea55859 100644
--- a/arch/arm/cpu/pxa/config.mk
+++ b/arch/arm/cpu/pxa/config.mk
@@ -24,7 +24,7 @@
PLATFORM_RELFLAGS += -fno-common -ffixed-r8 -msoft-float
-PLATFORM_CPPFLAGS += -march=armv5te -mtune=xscale
+PLATFORM_CPPFLAGS += -mcpu=xscale
# =========================================================================
#
# Supply options according to compiler version
diff --git a/arch/arm/cpu/pxa/pxa2xx.c b/arch/arm/cpu/pxa/pxa2xx.c
index 0c18610..f07dc67 100644
--- a/arch/arm/cpu/pxa/pxa2xx.c
+++ b/arch/arm/cpu/pxa/pxa2xx.c
@@ -244,7 +244,7 @@
{
writel(CONFIG_SYS_CKEN, CKEN);
writel(CONFIG_SYS_CCCR, CCCR);
- asm volatile("mcr p14, 0, %0, c6, c0, 0" : : "r"(2));
+ asm volatile("mcr p14, 0, %0, c6, c0, 0" : : "r"(0x0b));
/* enable the 32Khz oscillator for RTC and PowerManager */
writel(OSCC_OON, OSCC);
diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S
index ada91a6..2e623b1 100644
--- a/arch/arm/cpu/pxa/start.S
+++ b/arch/arm/cpu/pxa/start.S
@@ -118,10 +118,6 @@
_bss_start_ofs:
.word __bss_start - _start
-.globl _image_copy_end_ofs
-_image_copy_end_ofs:
- .word __image_copy_end - _start
-
.globl _bss_end_ofs
_bss_end_ofs:
.word __bss_end - _start
@@ -171,93 +167,23 @@
bl _main
/*------------------------------------------------------------------------------*/
-#ifndef CONFIG_SPL_BUILD
-/*
- * void relocate_code(addr_moni)
- *
- * This function relocates the monitor code.
- */
- .globl relocate_code
-relocate_code:
- mov r6, r0 /* save addr of destination */
-
-/* Disable the Dcache RAM lock for stack now */
-#ifdef CONFIG_CPU_PXA25X
- mov r12, lr
- bl cpu_init_crit
- mov lr, r12
-#endif
-
- adr r0, _start
- subs r9, r6, r0 /* r9 <- relocation offset */
- beq relocate_done /* skip relocation */
- mov r1, r6 /* r1 <- scratch for copy_loop */
- ldr r3, _image_copy_end_ofs
- add r2, r0, r3 /* r2 <- source end address */
-
-copy_loop:
- ldmia r0!, {r10-r11} /* copy from source address [r0] */
- stmia r1!, {r10-r11} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- blo copy_loop
-
-#ifndef CONFIG_SPL_BUILD
- /*
- * fix .rel.dyn relocations
- */
- ldr r0, _TEXT_BASE /* r0 <- Text base */
- ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
- add r10, r10, r0 /* r10 <- sym table in FLASH */
- ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
- add r2, r2, r0 /* r2 <- rel dyn start in FLASH */
- ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
- add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
-fixloop:
- ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
- add r0, r0, r9 /* r0 <- location to fix up in RAM */
- ldr r1, [r2, #4]
- and r7, r1, #0xff
- cmp r7, #23 /* relative fixup? */
- beq fixrel
- cmp r7, #2 /* absolute fixup? */
- beq fixabs
- /* ignore unknown type of fixup */
- b fixnext
-fixabs:
- /* absolute fix: set location to (offset) symbol value */
- mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
- add r1, r10, r1 /* r1 <- address of symbol in table */
- ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r1, r9 /* r1 <- relocated sym addr */
- b fixnext
-fixrel:
- /* relative fix: increase location by offset */
- ldr r1, [r0]
- add r1, r1, r9
-fixnext:
- str r1, [r0]
- add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
- cmp r2, r3
- blo fixloop
-#endif
-
-relocate_done:
-
- bx lr
-
-_rel_dyn_start_ofs:
- .word __rel_dyn_start - _start
-_rel_dyn_end_ofs:
- .word __rel_dyn_end - _start
-_dynsym_start_ofs:
- .word __dynsym_start - _start
-
-#endif
.globl c_runtime_cpu_setup
c_runtime_cpu_setup:
+#ifdef CONFIG_CPU_PXA25X
+ /*
+ * Unlock (actually, disable) the cache now that board_init_f
+ * is done. We could do this earlier but we would need to add
+ * a new C runtime hook, whereas c_runtime_cpu_setup already
+ * exists.
+ * As this routine is just a call to cpu_init_crit, let us
+ * tail-optimize and do a simple branch here.
+ */
+ b cpu_init_crit
+#else
bx lr
+#endif
/*
*************************************************************************
@@ -282,10 +208,9 @@
* disable MMU stuff and caches
*/
mrc p15, 0, r0, c1, c0, 0
- bic r0, r0, #0x00002300 @ clear bits 13, 9:8 (--V- --RS)
+ bic r0, r0, #0x00003300 @ clear bits 13:12, 9:8 (--VI --RS)
bic r0, r0, #0x00000087 @ clear bits 7, 2:0 (B--- -CAM)
orr r0, r0, #0x00000002 @ set bit 2 (A) Align
- orr r0, r0, #0x00001000 @ set bit 12 (I) I-Cache
mcr p15, 0, r0, c1, c0, 0
mov pc, lr /* back to my caller */
diff --git a/arch/arm/cpu/s3c44b0/start.S b/arch/arm/cpu/s3c44b0/start.S
index 7361aa2..78183fc 100644
--- a/arch/arm/cpu/s3c44b0/start.S
+++ b/arch/arm/cpu/s3c44b0/start.S
@@ -80,10 +80,6 @@
_bss_start_ofs:
.word __bss_start - _start
-.globl _image_copy_end_ofs
-_image_copy_end_ofs:
- .word __image_copy_end - _start
-
.globl _bss_end_ofs
_bss_end_ofs:
.word __bss_end - _start
@@ -140,79 +136,6 @@
/*------------------------------------------------------------------------------*/
-/*
- * void relocate_code(addr_moni)
- *
- * This function relocates the monitor code.
- */
- .globl relocate_code
-relocate_code:
- mov r6, r0 /* save addr of destination */
-
- adr r0, _start
- subs r9, r6, r0 /* r9 <- relocation offset */
- beq relocate_done /* skip relocation */
- mov r1, r6 /* r1 <- scratch for copy_loop */
- ldr r3, _image_copy_end_ofs
- add r2, r0, r3 /* r2 <- source end address */
-
-copy_loop:
- ldmia r0!, {r10-r11} /* copy from source address [r0] */
- stmia r1!, {r10-r11} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- blo copy_loop
-
-#ifndef CONFIG_SPL_BUILD
- /*
- * fix .rel.dyn relocations
- */
- ldr r0, _TEXT_BASE /* r0 <- Text base */
- ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
- add r10, r10, r0 /* r10 <- sym table in FLASH */
- ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
- add r2, r2, r0 /* r2 <- rel dyn start in FLASH */
- ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
- add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
-fixloop:
- ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
- add r0, r0, r9 /* r0 <- location to fix up in RAM */
- ldr r1, [r2, #4]
- and r7, r1, #0xff
- cmp r7, #23 /* relative fixup? */
- beq fixrel
- cmp r7, #2 /* absolute fixup? */
- beq fixabs
- /* ignore unknown type of fixup */
- b fixnext
-fixabs:
- /* absolute fix: set location to (offset) symbol value */
- mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
- add r1, r10, r1 /* r1 <- address of symbol in table */
- ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r1, r9 /* r1 <- relocated sym addr */
- b fixnext
-fixrel:
- /* relative fix: increase location by offset */
- ldr r1, [r0]
- add r1, r1, r9
-fixnext:
- str r1, [r0]
- add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
- cmp r2, r3
- blo fixloop
-#endif
-
-relocate_done:
-
- bx lr
-
-_rel_dyn_start_ofs:
- .word __rel_dyn_start - _start
-_rel_dyn_end_ofs:
- .word __rel_dyn_end - _start
-_dynsym_start_ofs:
- .word __dynsym_start - _start
-
.globl c_runtime_cpu_setup
c_runtime_cpu_setup:
diff --git a/arch/arm/cpu/sa1100/start.S b/arch/arm/cpu/sa1100/start.S
index 8a2eafd..30d5a90 100644
--- a/arch/arm/cpu/sa1100/start.S
+++ b/arch/arm/cpu/sa1100/start.S
@@ -90,10 +90,6 @@
_bss_start_ofs:
.word __bss_start - _start
-.globl _image_copy_end_ofs
-_image_copy_end_ofs:
- .word __image_copy_end - _start
-
.globl _bss_end_ofs
_bss_end_ofs:
.word __bss_end - _start
@@ -144,79 +140,6 @@
/*------------------------------------------------------------------------------*/
-/*
- * void relocate_code(addr_moni)
- *
- * This function relocates the monitor code.
- */
- .globl relocate_code
-relocate_code:
- mov r6, r0 /* save addr of destination */
-
- adr r0, _start
- subs r9, r6, r0 /* r9 <- relocation offset */
- beq relocate_done /* skip relocation */
- mov r1, r6 /* r1 <- scratch for copy_loop */
- ldr r3, _image_copy_end_ofs
- add r2, r0, r3 /* r2 <- source end address */
-
-copy_loop:
- ldmia r0!, {r10-r11} /* copy from source address [r0] */
- stmia r1!, {r10-r11} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- blo copy_loop
-
-#ifndef CONFIG_SPL_BUILD
- /*
- * fix .rel.dyn relocations
- */
- ldr r0, _TEXT_BASE /* r0 <- Text base */
- ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
- add r10, r10, r0 /* r10 <- sym table in FLASH */
- ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
- add r2, r2, r0 /* r2 <- rel dyn start in FLASH */
- ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
- add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
-fixloop:
- ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
- add r0, r0, r9 /* r0 <- location to fix up in RAM */
- ldr r1, [r2, #4]
- and r7, r1, #0xff
- cmp r7, #23 /* relative fixup? */
- beq fixrel
- cmp r7, #2 /* absolute fixup? */
- beq fixabs
- /* ignore unknown type of fixup */
- b fixnext
-fixabs:
- /* absolute fix: set location to (offset) symbol value */
- mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
- add r1, r10, r1 /* r1 <- address of symbol in table */
- ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r1, r9 /* r1 <- relocated sym addr */
- b fixnext
-fixrel:
- /* relative fix: increase location by offset */
- ldr r1, [r0]
- add r1, r1, r9
-fixnext:
- str r1, [r0]
- add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
- cmp r2, r3
- blo fixloop
-#endif
-
-relocate_done:
-
- mov pc, lr
-
-_rel_dyn_start_ofs:
- .word __rel_dyn_start - _start
-_rel_dyn_end_ofs:
- .word __rel_dyn_end - _start
-_dynsym_start_ofs:
- .word __dynsym_start - _start
-
.globl c_runtime_cpu_setup
c_runtime_cpu_setup:
diff --git a/arch/arm/cpu/tegra-common/ap.c b/arch/arm/cpu/tegra-common/ap.c
index 9b77b2b..9e6d51d 100644
--- a/arch/arm/cpu/tegra-common/ap.c
+++ b/arch/arm/cpu/tegra-common/ap.c
@@ -72,6 +72,7 @@
switch (chip_id) {
case CHIPID_TEGRA20:
switch (sku_id) {
+ case SKU_ID_T20_7:
case SKU_ID_T20:
return TEGRA_SOC_T20;
case SKU_ID_T25SE:
@@ -92,6 +93,7 @@
case CHIPID_TEGRA114:
switch (sku_id) {
case SKU_ID_T114_ENG:
+ case SKU_ID_T114_1:
return TEGRA_SOC_T114;
}
break;
@@ -107,6 +109,10 @@
struct scu_ctlr *scu = (struct scu_ctlr *)NV_PA_ARM_PERIPHBASE;
u32 reg;
+ /* Only enable the SCU on T20/T25 */
+ if (tegra_get_chip() != CHIPID_TEGRA20)
+ return;
+
/* If SCU already setup/enabled, return */
if (readl(&scu->scu_ctrl) & SCU_CTRL_ENABLE)
return;
diff --git a/arch/arm/cpu/tegra-common/clock.c b/arch/arm/cpu/tegra-common/clock.c
index 9156d00..268fb91 100644
--- a/arch/arm/cpu/tegra-common/clock.c
+++ b/arch/arm/cpu/tegra-common/clock.c
@@ -321,17 +321,17 @@
unsigned effective_rate;
int mux_bits, divider_bits, source;
int divider;
+ int xdiv = 0;
/* work out the source clock and set it */
source = get_periph_clock_source(periph_id, parent, &mux_bits,
÷r_bits);
+ divider = find_best_divider(divider_bits, pll_rate[parent],
+ rate, &xdiv);
if (extra_div)
- divider = find_best_divider(divider_bits, pll_rate[parent],
- rate, extra_div);
- else
- divider = clk_get_divider(divider_bits, pll_rate[parent],
- rate);
+ *extra_div = xdiv;
+
assert(divider >= 0);
if (adjust_periph_pll(periph_id, source, mux_bits, divider))
return -1U;
diff --git a/arch/arm/cpu/u-boot-spl.lds b/arch/arm/cpu/u-boot-spl.lds
index 1408f03..b6ed25f 100644
--- a/arch/arm/cpu/u-boot-spl.lds
+++ b/arch/arm/cpu/u-boot-spl.lds
@@ -58,11 +58,6 @@
__rel_dyn_end = .;
}
- .dynsym : {
- __dynsym_start = .;
- *(.dynsym)
- }
-
_end = .;
.bss __rel_dyn_start (OVERLAY) : {
@@ -72,6 +67,7 @@
__bss_end = .;
}
+ /DISCARD/ : { *(.dynsym) }
/DISCARD/ : { *(.dynstr*) }
/DISCARD/ : { *(.dynamic*) }
/DISCARD/ : { *(.plt*) }
diff --git a/arch/arm/cpu/u-boot.lds b/arch/arm/cpu/u-boot.lds
index d9bbee3..3037885 100644
--- a/arch/arm/cpu/u-boot.lds
+++ b/arch/arm/cpu/u-boot.lds
@@ -33,7 +33,7 @@
. = ALIGN(4);
.text :
{
- __image_copy_start = .;
+ *(.__image_copy_start)
CPUDIR/start.o (.text*)
*(.text*)
}
@@ -57,17 +57,23 @@
. = ALIGN(4);
- __image_copy_end = .;
-
- .rel.dyn : {
- __rel_dyn_start = .;
- *(.rel*)
- __rel_dyn_end = .;
+ .image_copy_end :
+ {
+ *(.__image_copy_end)
}
- .dynsym : {
- __dynsym_start = .;
- *(.dynsym)
+ .rel_dyn_start :
+ {
+ *(.__rel_dyn_start)
+ }
+
+ .rel.dyn : {
+ *(.rel*)
+ }
+
+ .rel_dyn_end :
+ {
+ *(.__rel_dyn_end)
}
_end = .;
@@ -101,6 +107,7 @@
KEEP(*(.__bss_end));
}
+ /DISCARD/ : { *(.dynsym) }
/DISCARD/ : { *(.dynstr*) }
/DISCARD/ : { *(.dynamic*) }
/DISCARD/ : { *(.plt*) }
diff --git a/arch/arm/dts/exynos5250.dtsi b/arch/arm/dts/exynos5250.dtsi
index df4b231..f98243c 100644
--- a/arch/arm/dts/exynos5250.dtsi
+++ b/arch/arm/dts/exynos5250.dtsi
@@ -169,4 +169,64 @@
#address-cells = <1>;
#size-cells = <1>;
};
+
+ mmc@12200000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "samsung,exynos5250-dwmmc";
+ reg = <0x12200000 0x1000>;
+ interrupts = <0 75 0>;
+ };
+
+ mmc@12210000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "samsung,exynos5250-dwmmc";
+ reg = <0x12210000 0x1000>;
+ interrupts = <0 76 0>;
+ };
+
+ mmc@12220000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "samsung,exynos5250-dwmmc";
+ reg = <0x12220000 0x1000>;
+ interrupts = <0 77 0>;
+ };
+
+ mmc@12230000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "samsung,exynos5250-dwmmc";
+ reg = <0x12230000 0x1000>;
+ interrupts = <0 78 0>;
+ };
+
+ serial@12C00000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x12C00000 0x100>;
+ interrupts = <0 51 0>;
+ id = <0>;
+ };
+
+ serial@12C10000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x12C10000 0x100>;
+ interrupts = <0 52 0>;
+ id = <1>;
+ };
+
+ serial@12C20000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x12C20000 0x100>;
+ interrupts = <0 53 0>;
+ id = <2>;
+ };
+
+ serial@12C30000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x12C30000 0x100>;
+ interrupts = <0 54 0>;
+ id = <3>;
+ };
};
diff --git a/arch/arm/dts/tegra114.dtsi b/arch/arm/dts/tegra114.dtsi
index f86d18d..626cc3c 100644
--- a/arch/arm/dts/tegra114.dtsi
+++ b/arch/arm/dts/tegra114.dtsi
@@ -216,4 +216,31 @@
clocks = <&tegra_car 15>;
status = "disable";
};
+
+ usb@7d000000 {
+ compatible = "nvidia,tegra114-ehci";
+ reg = <0x7d000000 0x4000>;
+ interrupts = <52>;
+ phy_type = "utmi";
+ clocks = <&tegra_car 22>; /* PERIPH_ID_USBD */
+ status = "disabled";
+ };
+
+ usb@7d004000 {
+ compatible = "nvidia,tegra114-ehci";
+ reg = <0x7d004000 0x4000>;
+ interrupts = <53>;
+ phy_type = "hsic";
+ clocks = <&tegra_car 58>; /* PERIPH_ID_USB2 */
+ status = "disabled";
+ };
+
+ usb@7d008000 {
+ compatible = "nvidia,tegra114-ehci";
+ reg = <0x7d008000 0x4000>;
+ interrupts = <129>;
+ phy_type = "utmi";
+ clocks = <&tegra_car 59>; /* PERIPH_ID_USB3 */
+ status = "disabled";
+ };
};
diff --git a/arch/arm/dts/tegra30.dtsi b/arch/arm/dts/tegra30.dtsi
index ccf154f..fee1c36 100644
--- a/arch/arm/dts/tegra30.dtsi
+++ b/arch/arm/dts/tegra30.dtsi
@@ -216,4 +216,31 @@
clocks = <&tegra_car 15>;
status = "disabled";
};
+
+ usb@7d000000 {
+ compatible = "nvidia,tegra30-ehci";
+ reg = <0x7d000000 0x4000>;
+ interrupts = <52>;
+ phy_type = "utmi";
+ clocks = <&tegra_car 22>; /* PERIPH_ID_USBD */
+ status = "disabled";
+ };
+
+ usb@7d004000 {
+ compatible = "nvidia,tegra30-ehci";
+ reg = <0x7d004000 0x4000>;
+ interrupts = <53>;
+ phy_type = "hsic";
+ clocks = <&tegra_car 58>; /* PERIPH_ID_USB2 */
+ status = "disabled";
+ };
+
+ usb@7d008000 {
+ compatible = "nvidia,tegra30-ehci";
+ reg = <0x7d008000 0x4000>;
+ interrupts = <129>;
+ phy_type = "utmi";
+ clocks = <&tegra_car 59>; /* PERIPH_ID_USB3 */
+ status = "disabled";
+ };
};
diff --git a/arch/arm/include/asm/arch-am33xx/ddr_defs.h b/arch/arm/include/asm/arch-am33xx/ddr_defs.h
index bb53a6a..d2f3a78 100644
--- a/arch/arm/include/asm/arch-am33xx/ddr_defs.h
+++ b/arch/arm/include/asm/arch-am33xx/ddr_defs.h
@@ -284,7 +284,6 @@
* This structure represents the DDR io control on AM33XX devices.
*/
struct ddr_cmdtctrl {
- unsigned int resv1[1];
unsigned int cm0ioctl;
unsigned int cm1ioctl;
unsigned int cm2ioctl;
diff --git a/arch/arm/include/asm/arch-am33xx/gpio.h b/arch/arm/include/asm/arch-am33xx/gpio.h
index 1a211e9..8346979 100644
--- a/arch/arm/include/asm/arch-am33xx/gpio.h
+++ b/arch/arm/include/asm/arch-am33xx/gpio.h
@@ -21,6 +21,8 @@
#include <asm/omap_gpio.h>
+#define OMAP_MAX_GPIO 128
+
#define AM33XX_GPIO0_BASE 0x44E07000
#define AM33XX_GPIO1_BASE 0x4804C000
#define AM33XX_GPIO2_BASE 0x481AC000
diff --git a/arch/arm/include/asm/arch-am33xx/omap.h b/arch/arm/include/asm/arch-am33xx/omap.h
index 7e3bb9c..db15159 100644
--- a/arch/arm/include/asm/arch-am33xx/omap.h
+++ b/arch/arm/include/asm/arch-am33xx/omap.h
@@ -29,8 +29,8 @@
* at 0x40304000(EMU base) so that our code works for both EMU and GP
*/
#ifdef CONFIG_AM33XX
-#define NON_SECURE_SRAM_START 0x40304000
-#define NON_SECURE_SRAM_END 0x4030E000
+#define NON_SECURE_SRAM_START 0x402F0400
+#define NON_SECURE_SRAM_END 0x40310000
#elif defined(CONFIG_TI814X)
#define NON_SECURE_SRAM_START 0x40300000
#define NON_SECURE_SRAM_END 0x40320000
diff --git a/arch/arm/include/asm/arch-am33xx/sys_proto.h b/arch/arm/include/asm/arch-am33xx/sys_proto.h
index c913b5f..307ac28 100644
--- a/arch/arm/include/asm/arch-am33xx/sys_proto.h
+++ b/arch/arm/include/asm/arch-am33xx/sys_proto.h
@@ -30,7 +30,9 @@
extern struct ctrl_stat *cstat;
u32 get_device_type(void);
+void save_omap_boot_params(void);
void setup_clocks_for_console(void);
+void mpu_pll_config_val(int mpull_m);
void ddr_pll_config(unsigned int ddrpll_M);
void sdelay(unsigned long);
@@ -40,4 +42,7 @@
void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base,
u32 size);
void omap_nand_switch_ecc(uint32_t, uint32_t);
+
+void rtc32k_enable(void);
+void uart_soft_reset(void);
#endif
diff --git a/arch/arm/include/asm/arch-at91/at91_common.h b/arch/arm/include/asm/arch-at91/at91_common.h
index 8282f46..5843935 100644
--- a/arch/arm/include/asm/arch-at91/at91_common.h
+++ b/arch/arm/include/asm/arch-at91/at91_common.h
@@ -35,5 +35,6 @@
void at91_spi0_hw_init(unsigned long cs_mask);
void at91_spi1_hw_init(unsigned long cs_mask);
void at91_uhp_hw_init(void);
+void at91_lcd_hw_init(void);
#endif /* AT91_COMMON_H */
diff --git a/arch/arm/include/asm/arch-at91/at91_dbu.h b/arch/arm/include/asm/arch-at91/at91_dbu.h
index 3429293..9a640a5 100644
--- a/arch/arm/include/asm/arch-at91/at91_dbu.h
+++ b/arch/arm/include/asm/arch-at91/at91_dbu.h
@@ -38,4 +38,8 @@
#define AT91_DBU_CID_ARCH_9xx 0x01900000
#define AT91_DBU_CID_ARCH_9XExx 0x02900000
+#define AT91_DBU_CIDR_MASK 0x1f
+#define AT91_DBU_CIDR 0x40
+#define AT91_DBU_EXID 0x44
+
#endif
diff --git a/arch/arm/include/asm/arch-at91/at91_pmc.h b/arch/arm/include/asm/arch-at91/at91_pmc.h
index 086cb9b..66075b4 100644
--- a/arch/arm/include/asm/arch-at91/at91_pmc.h
+++ b/arch/arm/include/asm/arch-at91/at91_pmc.h
@@ -55,7 +55,16 @@
u32 reserved5[21];
u32 wpmr; /* 0xE4 Write Protect Mode Register (CAP0) */
u32 wpsr; /* 0xE8 Write Protect Status Register (CAP0) */
+#ifdef CONFIG_SAMA5D3
+ u32 reserved6[8];
+ u32 pcer1; /* 0x100 Periperial Clock Enable Register 1 */
+ u32 pcdr1; /* 0x104 Periperial Clock Disable Register 1 */
+ u32 pcsr1; /* 0x108 Periperial Clock Status Register 1 */
+ u32 pcr; /* 0x10c Periperial Control Register */
+ u32 ocr; /* 0x110 Oscillator Calibration Register */
+#else
u32 reserved8[5];
+#endif
} at91_pmc_t;
#endif /* end not assembly */
@@ -82,6 +91,16 @@
#define AT91_PMC_MCKR_CSS_PLLB 0x00000003
#define AT91_PMC_MCKR_CSS_MASK 0x00000003
+#ifdef CONFIG_SAMA5D3
+#define AT91_PMC_MCKR_PRES_1 0x00000000
+#define AT91_PMC_MCKR_PRES_2 0x00000010
+#define AT91_PMC_MCKR_PRES_4 0x00000020
+#define AT91_PMC_MCKR_PRES_8 0x00000030
+#define AT91_PMC_MCKR_PRES_16 0x00000040
+#define AT91_PMC_MCKR_PRES_32 0x00000050
+#define AT91_PMC_MCKR_PRES_64 0x00000060
+#define AT91_PMC_MCKR_PRES_MASK 0x00000070
+#else
#define AT91_PMC_MCKR_PRES_1 0x00000000
#define AT91_PMC_MCKR_PRES_2 0x00000004
#define AT91_PMC_MCKR_PRES_4 0x00000008
@@ -90,6 +109,7 @@
#define AT91_PMC_MCKR_PRES_32 0x00000014
#define AT91_PMC_MCKR_PRES_64 0x00000018
#define AT91_PMC_MCKR_PRES_MASK 0x0000001C
+#endif
#ifdef CONFIG_AT91RM9200
#define AT91_PMC_MCKR_MDIV_1 0x00000000
@@ -100,6 +120,9 @@
#else
#define AT91_PMC_MCKR_MDIV_1 0x00000000
#define AT91_PMC_MCKR_MDIV_2 0x00000100
+#ifdef CONFIG_SAMA5D3
+#define AT91_PMC_MCKR_MDIV_3 0x00000300
+#endif
#define AT91_PMC_MCKR_MDIV_4 0x00000200
#define AT91_PMC_MCKR_MDIV_MASK 0x00000300
#endif
diff --git a/arch/arm/include/asm/arch-at91/at91sam9_matrix.h b/arch/arm/include/asm/arch-at91/at91sam9_matrix.h
index b9a93b0..6e0bebd 100644
--- a/arch/arm/include/asm/arch-at91/at91sam9_matrix.h
+++ b/arch/arm/include/asm/arch-at91/at91sam9_matrix.h
@@ -23,7 +23,7 @@
#include <asm/arch/at91cap9_matrix.h>
#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
#include <asm/arch/at91sam9g45_matrix.h>
-#elif defined(CONFIG_AT91SAM9X5)
+#elif defined(CONFIG_AT91SAM9N12) || defined(CONFIG_AT91SAM9X5)
#include <asm/arch/at91sam9x5_matrix.h>
#else
#error "Unsupported AT91SAM9/CAP9 processor"
diff --git a/arch/arm/include/asm/arch-at91/at91sam9x5.h b/arch/arm/include/asm/arch-at91/at91sam9x5.h
index b7d1932..85e42f5 100644
--- a/arch/arm/include/asm/arch-at91/at91sam9x5.h
+++ b/arch/arm/include/asm/arch-at91/at91sam9x5.h
@@ -1,10 +1,10 @@
/*
* Chip-specific header file for the AT91SAM9x5 family
*
- * Copyright (C) 2012 Atmel Corporation.
+ * Copyright (C) 2012-2013 Atmel Corporation.
*
* Definitions for the SoC:
- * AT91SAM9x5
+ * AT91SAM9x5 & AT91SAM9N12
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -22,10 +22,12 @@
#define ATMEL_ID_SYS 1 /* System Controller Interrupt */
#define ATMEL_ID_PIOAB 2 /* Parallel I/O Controller A and B */
#define ATMEL_ID_PIOCD 3 /* Parallel I/O Controller C and D */
-#define ATMEL_ID_SMD 4 /* SMD Soft Modem (SMD) */
+#define ATMEL_ID_SMD 4 /* SMD Soft Modem (SMD), only for AT91SAM9X5 */
+#define ATMEL_ID_FUSE 4 /* FUSE Controller, only for AT91SAM9N12 */
#define ATMEL_ID_USART0 5 /* USART 0 */
#define ATMEL_ID_USART1 6 /* USART 1 */
#define ATMEL_ID_USART2 7 /* USART 2 */
+#define ATMEL_ID_USART3 8 /* USART 3 */
#define ATMEL_ID_TWI0 9 /* Two-Wire Interface 0 */
#define ATMEL_ID_TWI1 10 /* Two-Wire Interface 1 */
#define ATMEL_ID_TWI2 11 /* Two-Wire Interface 2 */
@@ -46,6 +48,7 @@
#define ATMEL_ID_HSMCI1 26 /* High Speed Multimedia Card Interface 1 */
#define ATMEL_ID_EMAC1 27 /* Ethernet MAC1 */
#define ATMEL_ID_SSC 28 /* Synchronous Serial Controller */
+#define ATMEL_ID_TRNG 30 /* True Random Number Generator */
#define ATMEL_ID_IRQ 31 /* Advanced Interrupt Controller */
/*
@@ -85,6 +88,7 @@
/*
* System Peripherals
*/
+#define ATMEL_BASE_FUSE 0xffffdc00
#define ATMEL_BASE_MATRIX 0xffffde00
#define ATMEL_BASE_PMECC 0xffffe000
#define ATMEL_BASE_PMERRLOC 0xffffe600
@@ -111,10 +115,15 @@
*/
#define ATMEL_BASE_ROM 0x00100000 /* Internal ROM base address */
#define ATMEL_BASE_SRAM 0x00300000 /* Internal SRAM base address */
+
+#ifdef CONFIG_AT91SAM9N12
+#define ATMEL_BASE_OHCI 0x00500000 /* USB Host controller */
+#else /* AT91SAM9X5 */
#define ATMEL_BASE_SMD 0x00400000 /* SMD Controller */
#define ATMEL_BASE_UDPHS_FIFO 0x00500000 /* USB Device HS controller */
#define ATMEL_BASE_OHCI 0x00600000 /* USB Host controller (OHCI) */
#define ATMEL_BASE_EHCI 0x00700000 /* USB Host controller (EHCI) */
+#endif
/* 9x5 series chip id definitions */
#define ARCH_ID_AT91SAM9X5 0x819a05a0
@@ -140,7 +149,11 @@
/*
* Cpu Name
*/
+#ifdef CONFIG_AT91SAM9N12
+#define ATMEL_CPU_NAME "AT91SAM9N12"
+#else /* AT91SAM9X5 */
#define ATMEL_CPU_NAME get_cpu_name()
+#endif
/*
* Other misc defines
diff --git a/arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h b/arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h
index d6ce6fa..0d33069 100644
--- a/arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h
+++ b/arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h
@@ -1,10 +1,10 @@
/*
* Matrix-centric header file for the AT91SAM9X5 family
*
- * Copyright (C) 2012 Atmel Corporation.
+ * Copyright (C) 2012-2013 Atmel Corporation.
*
* Memory Controllers (MATRIX, EBI) - System peripherals registers.
- * Based on AT91SAM9X5 preliminary datasheet.
+ * Based on AT91SAM9X5 & AT91SAM9N12 preliminary datasheet.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -17,14 +17,25 @@
#ifndef __ASSEMBLY__
+/* AT91SAM9N12 Matrix definition is a subset of AT91SAM9X5. */
struct at91_matrix {
u32 mcfg[16];
u32 scfg[16];
u32 pras[16][2];
u32 mrcr; /* 0x100 Master Remap Control */
- u32 filler[7];
+ u32 filler[5];
+#ifdef CONFIG_AT91SAM9X5
+ u32 filler1[2];
+#endif
+ /* EBI Chip Select Assignment Register
+ * 0x118: AT91SAM9N12
+ * 0x120: AT91SAM9X5
+ */
u32 ebicsa;
u32 filler4[47];
+#ifdef CONFIG_AT91SAM9N12
+ u32 filler5[2];
+#endif
u32 wpmr;
u32 wpsr;
};
diff --git a/arch/arm/include/asm/arch-at91/clk.h b/arch/arm/include/asm/arch-at91/clk.h
index d4852a3..04b0f83 100644
--- a/arch/arm/include/asm/arch-at91/clk.h
+++ b/arch/arm/include/asm/arch-at91/clk.h
@@ -95,4 +95,5 @@
}
int at91_clock_init(unsigned long main_clock);
+void at91_periph_clk_enable(int id);
#endif /* __ASM_ARM_ARCH_CLK_H__ */
diff --git a/arch/arm/include/asm/arch-at91/hardware.h b/arch/arm/include/asm/arch-at91/hardware.h
index 4c4ee70..b04641e 100644
--- a/arch/arm/include/asm/arch-at91/hardware.h
+++ b/arch/arm/include/asm/arch-at91/hardware.h
@@ -37,12 +37,14 @@
# include <asm/arch/at91sam9rl.h>
#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
# include <asm/arch/at91sam9g45.h>
-#elif defined(CONFIG_AT91SAM9X5)
+#elif defined(CONFIG_AT91SAM9N12) || defined(CONFIG_AT91SAM9X5)
# include <asm/arch/at91sam9x5.h>
#elif defined(CONFIG_AT91CAP9)
# include <asm/arch/at91cap9.h>
#elif defined(CONFIG_AT91X40)
# include <asm/arch/at91x40.h>
+#elif defined(CONFIG_SAMA5D3)
+# include <asm/arch/sama5d3.h>
#else
# error "Unsupported AT91 processor"
#endif
diff --git a/arch/arm/include/asm/arch-at91/sama5d3.h b/arch/arm/include/asm/arch-at91/sama5d3.h
new file mode 100644
index 0000000..883b932
--- /dev/null
+++ b/arch/arm/include/asm/arch-at91/sama5d3.h
@@ -0,0 +1,212 @@
+/*
+ * Chip-specific header file for the SAMA5D3 family
+ *
+ * (C) 2012 - 2013 Atmel Corporation.
+ * Bo Shen <voice.shen@atmel.com>
+ *
+ * Definitions for the SoC:
+ * SAMA5D3
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef SAMA5D3_H
+#define SAMA5D3_H
+
+/*
+ * defines to be used in other places
+ */
+#define CONFIG_ARMV7 /* ARM A5 Core */
+#define CONFIG_AT91FAMILY /* it's a member of AT91 */
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define ATMEL_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
+#define ATMEL_ID_SYS 1 /* System Controller Interrupt */
+#define ATMEL_ID_DBGU 2 /* Debug Unit Interrupt */
+#define ATMEL_ID_PIT 3 /* Periodic Interval Timer Interrupt */
+#define ATMEL_ID_WDT 4 /* Watchdog timer Interrupt */
+#define ATMEL_ID_SMC 5 /* Multi-bit ECC Interrupt */
+#define ATMEL_ID_PIOA 6 /* Parallel I/O Controller A */
+#define ATMEL_ID_PIOB 7 /* Parallel I/O Controller B */
+#define ATMEL_ID_PIOC 8 /* Parallel I/O Controller C */
+#define ATMEL_ID_PIOD 9 /* Parallel I/O Controller D */
+#define ATMEL_ID_PIOE 10 /* Parallel I/O Controller E */
+#define ATMEL_ID_SMD 11 /* SMD Soft Modem */
+#define ATMEL_ID_USART0 12 /* USART 0 */
+#define ATMEL_ID_USART1 13 /* USART 1 */
+#define ATMEL_ID_USART2 14 /* USART 2 */
+#define ATMEL_ID_USART3 15 /* USART 3 */
+#define ATMEL_ID_UART0 16
+#define ATMEL_ID_UART1 17
+#define ATMEL_ID_TWI0 18 /* Two-Wire Interface 0 */
+#define ATMEL_ID_TWI1 19 /* Two-Wire Interface 1 */
+#define ATMEL_ID_TWI2 20 /* Two-Wire Interface 2 */
+#define ATMEL_ID_MCI0 21 /* High Speed Multimedia Card Interface 0 */
+#define ATMEL_ID_MCI1 22 /* */
+#define ATMEL_ID_MCI2 23 /* */
+#define ATMEL_ID_SPI0 24 /* Serial Peripheral Interface 0 */
+#define ATMEL_ID_SPI1 25 /* Serial Peripheral Interface 1 */
+#define ATMEL_ID_TC0 26 /* */
+#define ATMEL_ID_TC1 27 /* */
+#define ATMEL_ID_PWMC 28 /* Pulse Width Modulation Controller */
+#define ATMEL_ID_TSC 29 /* Touch Screen ADC Controller */
+#define ATMEL_ID_DMA0 30 /* DMA Controller */
+#define ATMEL_ID_DMA1 31 /* DMA Controller */
+#define ATMEL_ID_UHPHS 32 /* USB Host High Speed */
+#define ATMEL_ID_UDPHS 33 /* USB Device High Speed */
+#define ATMEL_ID_GMAC 34
+#define ATMEL_ID_EMAC 35 /* Ethernet MAC */
+#define ATMEL_ID_LCDC 36 /* LCD Controller */
+#define ATMEL_ID_ISI 37 /* Image Sensor Interface */
+#define ATMEL_ID_SSC0 38 /* Synchronous Serial Controller 0 */
+#define ATMEL_ID_SSC1 39 /* Synchronous Serial Controller 1 */
+#define ATMEL_ID_CAN0 40
+#define ATMEL_ID_CAN1 41
+#define ATMEL_ID_SHA 42
+#define ATMEL_ID_AES 43
+#define ATMEL_ID_TDES 44
+#define ATMEL_ID_TRNG 45
+#define ATMEL_ID_ARM 46
+#define ATMEL_ID_IRQ0 47 /* Advanced Interrupt Controller */
+#define ATMEL_ID_FUSE 48
+#define ATMEL_ID_MPDDRC 49
+
+/* sama5d3 series chip id definitions */
+#define ARCH_ID_SAMA5D3 0x8a5c07c0
+#define ARCH_EXID_SAMA5D31 0x00444300
+#define ARCH_EXID_SAMA5D33 0x00414300
+#define ARCH_EXID_SAMA5D34 0x00414301
+#define ARCH_EXID_SAMA5D35 0x00584300
+
+#define cpu_is_sama5d3() (get_chip_id() == ARCH_ID_SAMA5D3)
+#define cpu_is_sama5d31() (cpu_is_sama5d3() && \
+ (get_extension_chip_id() == ARCH_EXID_SAMA5D31))
+#define cpu_is_sama5d33() (cpu_is_sama5d3() && \
+ (get_extension_chip_id() == ARCH_EXID_SAMA5D33))
+#define cpu_is_sama5d34() (cpu_is_sama5d3() && \
+ (get_extension_chip_id() == ARCH_EXID_SAMA5D34))
+#define cpu_is_sama5d35() (cpu_is_sama5d3() && \
+ (get_extension_chip_id() == ARCH_EXID_SAMA5D35))
+
+/*
+ * User Peripherals physical base addresses.
+ */
+#define ATMEL_BASE_MCI0 0xf0000000
+#define ATMEL_BASE_SPI0 0xf0004000
+#define ATMEL_BASE_SSC0 0xf000C000
+#define ATMEL_BASE_TC2 0xf0010000
+#define ATMEL_BASE_TWI0 0xf0014000
+#define ATMEL_BASE_TWI1 0xf0018000
+#define ATMEL_BASE_USART0 0xf001c000
+#define ATMEL_BASE_USART1 0xf0020000
+#define ATMEL_BASE_UART0 0xf0024000
+#define ATMEL_BASE_GMAC 0xf0028000
+#define ATMEL_BASE_PWMC 0xf002c000
+#define ATMEL_BASE_LCDC 0xf0030000
+#define ATMEL_BASE_ISI 0xf0034000
+#define ATMEL_BASE_SFR 0xf0038000
+/* Reserved: 0xf003c000 - 0xf8000000 */
+#define ATMEL_BASE_MCI1 0xf8000000
+#define ATMEL_BASE_MCI2 0xf8004000
+#define ATMEL_BASE_SPI1 0xf8008000
+#define ATMEL_BASE_SSC1 0xf800c000
+#define ATMEL_BASE_CAN1 0xf8010000
+#define ATMEL_BASE_TC3 0xf8014000
+#define ATMEL_BASE_TSADC 0xf8018000
+#define ATMEL_BASE_TWI2 0xf801c000
+#define ATMEL_BASE_USART2 0xf8020000
+#define ATMEL_BASE_USART3 0xf8024000
+#define ATMEL_BASE_UART1 0xf8028000
+#define ATMEL_BASE_EMAC 0xf802c000
+#define ATMEL_BASE_UDHPS 0xf8030000
+#define ATMEL_BASE_SHA 0xf8034000
+#define ATMEL_BASE_AES 0xf8038000
+#define ATMEL_BASE_TDES 0xf803c000
+#define ATMEL_BASE_TRNG 0xf8040000
+/* Reserved: 0xf804400 - 0xffffc00 */
+
+/*
+ * System Peripherals physical base addresses.
+ */
+#define ATMEL_BASE_SYS 0xffffc000
+#define ATMEL_BASE_SMC 0xffffc000
+#define ATMEL_BASE_PMECC (ATMEL_BASE_SMC + 0x070)
+#define ATMEL_BASE_PMERRLOC (ATMEL_BASE_SMC + 0x500)
+#define ATMEL_BASE_FUSE 0xffffe400
+#define ATMEL_BASE_DMAC0 0xffffe600
+#define ATMEL_BASE_DMAC1 0xffffe800
+#define ATMEL_BASE_MPDDRC 0xffffea00
+#define ATMEL_BASE_MATRIX 0xffffec00
+#define ATMEL_BASE_DBGU 0xffffee00
+#define ATMEL_BASE_AIC 0xfffff000
+#define ATMEL_BASE_PIOA 0xfffff200
+#define ATMEL_BASE_PIOB 0xfffff400
+#define ATMEL_BASE_PIOC 0xfffff600
+#define ATMEL_BASE_PIOD 0xfffff800
+#define ATMEL_BASE_PIOE 0xfffffa00
+#define ATMEL_BASE_PMC 0xfffffc00
+#define ATMEL_BASE_RSTC 0xfffffe00
+#define ATMEL_BASE_SHDWN 0xfffffe10
+#define ATMEL_BASE_PIT 0xfffffe30
+#define ATMEL_BASE_WDT 0xfffffe40
+#define ATMEL_BASE_SCKCR 0xfffffe50
+#define ATMEL_BASE_GPBR 0xfffffe60
+#define ATMEL_BASE_RTC 0xfffffeb0
+/* Reserved: 0xfffffee0 - 0xffffffff */
+
+/*
+ * Internal Memory.
+ */
+#define ATMEL_BASE_ROM 0x00100000 /* Internal ROM base address */
+#define ATMEL_BASE_SRAM 0x00200000 /* Internal ROM base address */
+#define ATMEL_BASE_SRAM0 0x00300000 /* Internal SRAM base address */
+#define ATMEL_BASE_SRAM1 0x00310000 /* Internal SRAM base address */
+#define ATMEL_BASE_SMD 0x00400000 /* Internal ROM base address */
+#define ATMEL_BASE_UDPHS_FIFO 0x00500000 /* USB Device HS controller */
+#define ATMEL_BASE_OHCI 0x00600000 /* USB Host controller (OHCI) */
+#define ATMEL_BASE_EHCI 0x00700000 /* USB Host controller (EHCI) */
+#define ATMEL_BASE_AXI 0x00800000 /* Video Decoder Controller */
+#define ATMEL_BASE_DAP 0x00900000 /* Video Decoder Controller */
+
+/*
+ * External memory
+ */
+#define ATMEL_BASE_CS0 0x10000000
+#define ATMEL_BASE_DDRCS 0x20000000
+#define ATMEL_BASE_CS1 0x40000000
+#define ATMEL_BASE_CS2 0x50000000
+#define ATMEL_BASE_CS3 0x60000000
+
+/*
+ * Other misc defines
+ */
+#define ATMEL_PIO_PORTS 5
+#define CPU_HAS_PIO3
+#define PIO_SCDR_DIV 0x3fff
+
+/*
+ * PMECC table in ROM
+ */
+#define ATMEL_PMECC_INDEX_OFFSET_512 0x10000
+#define ATMEL_PMECC_INDEX_OFFSET_1024 0x18000
+#define ATMEL_PMECC_ALPHA_OFFSET_512 0x10000
+#define ATMEL_PMECC_ALPHA_OFFSET_1024 0x18000
+
+/*
+ * SAMA5D3 specific prototypes
+ */
+#ifndef __ASSEMBLY__
+unsigned int get_chip_id(void);
+unsigned int get_extension_chip_id(void);
+unsigned int has_emac(void);
+unsigned int has_gmac(void);
+unsigned int has_lcdc(void);
+char *get_cpu_name(void);
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/arch-at91/sama5d3_smc.h b/arch/arm/include/asm/arch-at91/sama5d3_smc.h
new file mode 100644
index 0000000..eb53eba
--- /dev/null
+++ b/arch/arm/include/asm/arch-at91/sama5d3_smc.h
@@ -0,0 +1,79 @@
+/*
+ * Copyright (C) 2012 Atmel Corporation.
+ *
+ * Static Memory Controllers (SMC) - System peripherals registers.
+ * Based on SAMA5D3 datasheet.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef SAMA5D3_SMC_H
+#define SAMA5D3_SMC_H
+
+#ifdef __ASSEMBLY__
+#define AT91_ASM_SMC_SETUP0 (ATMEL_BASE_SMC + 0x600)
+#define AT91_ASM_SMC_PULSE0 (ATMEL_BASE_SMC + 0x604)
+#define AT91_ASM_SMC_CYCLE0 (ATMEL_BASE_SMC + 0x608)
+#define AT91_ASM_SMC_MODE0 (ATMEL_BASE_SMC + 0x60C)
+#else
+struct at91_cs {
+ u32 reserved[96];
+ u32 setup; /* 0x600 SMC Setup Register */
+ u32 pulse; /* 0x604 SMC Pulse Register */
+ u32 cycle; /* 0x608 SMC Cycle Register */
+ u32 timings; /* 0x60C SMC Cycle Register */
+ u32 mode; /* 0x610 SMC Mode Register */
+};
+
+struct at91_smc {
+ struct at91_cs cs[4];
+};
+#endif /* __ASSEMBLY__ */
+
+#define AT91_SMC_SETUP_NWE(x) (x & 0x3f)
+#define AT91_SMC_SETUP_NCS_WR(x) ((x & 0x3f) << 8)
+#define AT91_SMC_SETUP_NRD(x) ((x & 0x3f) << 16)
+#define AT91_SMC_SETUP_NCS_RD(x) ((x & 0x3f) << 24)
+
+#define AT91_SMC_PULSE_NWE(x) (x & 0x3f)
+#define AT91_SMC_PULSE_NCS_WR(x) ((x & 0x3f) << 8)
+#define AT91_SMC_PULSE_NRD(x) ((x & 0x3f) << 16)
+#define AT91_SMC_PULSE_NCS_RD(x) ((x & 0x3f) << 24)
+
+#define AT91_SMC_CYCLE_NWE(x) (x & 0x1ff)
+#define AT91_SMC_CYCLE_NRD(x) ((x & 0x1ff) << 16)
+
+#define AT91_SMC_TIMINGS_TCLR(x) (x & 0xf)
+#define AT91_SMC_TIMINGS_TADL(x) ((x & 0xf) << 4)
+#define AT91_SMC_TIMINGS_TAR(x) ((x & 0xf) << 8)
+#define AT91_SMC_TIMINGS_OCMS(x) ((x & 0x1) << 12)
+#define AT91_SMC_TIMINGS_TRR(x) ((x & 0xf) << 16)
+#define AT91_SMC_TIMINGS_TWB(x) ((x & 0xf) << 24)
+#define AT91_SMC_TIMINGS_RBNSEL(x) ((x & 0xf) << 28)
+#define AT91_SMC_TIMINGS_NFSEL(x) ((x & 0x1) << 31)
+
+#define AT91_SMC_MODE_RM_NCS 0x00000000
+#define AT91_SMC_MODE_RM_NRD 0x00000001
+#define AT91_SMC_MODE_WM_NCS 0x00000000
+#define AT91_SMC_MODE_WM_NWE 0x00000002
+
+#define AT91_SMC_MODE_EXNW_DISABLE 0x00000000
+#define AT91_SMC_MODE_EXNW_FROZEN 0x00000020
+#define AT91_SMC_MODE_EXNW_READY 0x00000030
+
+#define AT91_SMC_MODE_BAT 0x00000100
+#define AT91_SMC_MODE_DBW_8 0x00000000
+#define AT91_SMC_MODE_DBW_16 0x00001000
+#define AT91_SMC_MODE_DBW_32 0x00002000
+#define AT91_SMC_MODE_TDF_CYCLE(x) ((x & 0xf) << 16)
+#define AT91_SMC_MODE_TDF 0x00100000
+#define AT91_SMC_MODE_PMEN 0x01000000
+#define AT91_SMC_MODE_PS_4 0x00000000
+#define AT91_SMC_MODE_PS_8 0x10000000
+#define AT91_SMC_MODE_PS_16 0x20000000
+#define AT91_SMC_MODE_PS_32 0x30000000
+
+#endif
diff --git a/arch/arm/include/asm/arch-davinci/pinmux_defs.h b/arch/arm/include/asm/arch-davinci/pinmux_defs.h
index a851f1f..beaf0d6 100644
--- a/arch/arm/include/asm/arch-davinci/pinmux_defs.h
+++ b/arch/arm/include/asm/arch-davinci/pinmux_defs.h
@@ -22,8 +22,14 @@
#define __ASM_ARCH_PINMUX_DEFS_H
#include <asm/arch/davinci_misc.h>
+#include <config.h>
-/* SPI pin muxer settings */
+/* SPI0 pin muxer settings */
+extern const struct pinmux_config spi0_pins_base[3];
+extern const struct pinmux_config spi0_pins_scs0[1];
+extern const struct pinmux_config spi0_pins_ena[1];
+
+/* SPI1 pin muxer settings */
extern const struct pinmux_config spi1_pins_base[3];
extern const struct pinmux_config spi1_pins_scs0[1];
@@ -35,6 +41,7 @@
/* EMAC pin muxer settings*/
extern const struct pinmux_config emac_pins_rmii[7];
+extern const struct pinmux_config emac_pins_rmii_clk_source[1];
extern const struct pinmux_config emac_pins_mii[15];
extern const struct pinmux_config emac_pins_mdio[2];
@@ -43,13 +50,19 @@
extern const struct pinmux_config i2c1_pins[2];
/* EMIFA pin muxer settings */
+extern const struct pinmux_config emifa_pins[40];
+extern const struct pinmux_config emifa_pins_cs0[1];
extern const struct pinmux_config emifa_pins_cs2[1];
extern const struct pinmux_config emifa_pins_cs3[1];
extern const struct pinmux_config emifa_pins_cs4[1];
extern const struct pinmux_config emifa_pins_nand[12];
extern const struct pinmux_config emifa_pins_nor[43];
+/* USB pin mux setting */
+extern const struct pinmux_config usb_pins[1];
+
/* MMC pin muxer settings */
+extern const struct pinmux_config mmc0_pins_8bit[10];
extern const struct pinmux_config mmc0_pins[6];
#endif
diff --git a/arch/arm/include/asm/arch-exynos/cpu.h b/arch/arm/include/asm/arch-exynos/cpu.h
index f76e489..8685c42 100644
--- a/arch/arm/include/asm/arch-exynos/cpu.h
+++ b/arch/arm/include/asm/arch-exynos/cpu.h
@@ -38,9 +38,9 @@
#define EXYNOS4_CLOCK_BASE 0x10030000
#define EXYNOS4_SYSTIMER_BASE 0x10050000
#define EXYNOS4_WATCHDOG_BASE 0x10060000
+#define EXYNOS4_TZPC_BASE 0x10110000
#define EXYNOS4_MIU_BASE 0x10600000
-#define EXYNOS4_DMC0_BASE 0x10400000
-#define EXYNOS4_DMC1_BASE 0x10410000
+#define EXYNOS4_DMC_CTRL_BASE 0x10400000
#define EXYNOS4_GPIO_PART2_BASE 0x11000000
#define EXYNOS4_GPIO_PART1_BASE 0x11400000
#define EXYNOS4_FIMD_BASE 0x11C00000
@@ -63,6 +63,7 @@
#define EXYNOS4_DP_BASE DEVICE_NOT_AVAILABLE
#define EXYNOS4_SPI_ISP_BASE DEVICE_NOT_AVAILABLE
#define EXYNOS4_ACE_SFR_BASE DEVICE_NOT_AVAILABLE
+#define EXYNOS4_DMC_PHY_BASE DEVICE_NOT_AVAILABLE
/* EXYNOS4X12 */
#define EXYNOS4X12_GPIO_PART3_BASE 0x03860000
@@ -74,8 +75,8 @@
#define EXYNOS4X12_CLOCK_BASE 0x10030000
#define EXYNOS4X12_SYSTIMER_BASE 0x10050000
#define EXYNOS4X12_WATCHDOG_BASE 0x10060000
-#define EXYNOS4X12_DMC0_BASE 0x10600000
-#define EXYNOS4X12_DMC1_BASE 0x10610000
+#define EXYNOS4X12_TZPC_BASE 0x10110000
+#define EXYNOS4X12_DMC_CTRL_BASE 0x10600000
#define EXYNOS4X12_GPIO_PART4_BASE 0x106E0000
#define EXYNOS4X12_GPIO_PART2_BASE 0x11000000
#define EXYNOS4X12_GPIO_PART1_BASE 0x11400000
@@ -97,6 +98,7 @@
#define EXYNOS4X12_SPI_BASE DEVICE_NOT_AVAILABLE
#define EXYNOS4X12_SPI_ISP_BASE DEVICE_NOT_AVAILABLE
#define EXYNOS4X12_ACE_SFR_BASE DEVICE_NOT_AVAILABLE
+#define EXYNOS4X12_DMC_PHY_BASE DEVICE_NOT_AVAILABLE
/* EXYNOS5 Common*/
#define EXYNOS5_I2C_SPACING 0x10000
@@ -107,10 +109,10 @@
#define EXYNOS5_POWER_BASE 0x10040000
#define EXYNOS5_SWRESET 0x10040400
#define EXYNOS5_SYSREG_BASE 0x10050000
+#define EXYNOS5_TZPC_BASE 0x10100000
#define EXYNOS5_WATCHDOG_BASE 0x101D0000
#define EXYNOS5_ACE_SFR_BASE 0x10830000
-#define EXYNOS5_DMC_PHY0_BASE 0x10C00000
-#define EXYNOS5_DMC_PHY1_BASE 0x10C10000
+#define EXYNOS5_DMC_PHY_BASE 0x10C00000
#define EXYNOS5_GPIO_PART3_BASE 0x10D10000
#define EXYNOS5_DMC_CTRL_BASE 0x10DD0000
#define EXYNOS5_GPIO_PART1_BASE 0x11400000
@@ -233,6 +235,9 @@
SAMSUNG_BASE(power, POWER_BASE)
SAMSUNG_BASE(spi, SPI_BASE)
SAMSUNG_BASE(spi_isp, SPI_ISP_BASE)
+SAMSUNG_BASE(tzpc, TZPC_BASE)
+SAMSUNG_BASE(dmc_ctrl, DMC_CTRL_BASE)
+SAMSUNG_BASE(dmc_phy, DMC_PHY_BASE)
#endif
#endif /* _EXYNOS4_CPU_H */
diff --git a/arch/arm/include/asm/arch-exynos/dwmmc.h b/arch/arm/include/asm/arch-exynos/dwmmc.h
index 8acdf9b..3b147b8 100644
--- a/arch/arm/include/asm/arch-exynos/dwmmc.h
+++ b/arch/arm/include/asm/arch-exynos/dwmmc.h
@@ -27,10 +27,7 @@
#define DWMCI_SET_DRV_CLK(x) ((x) << 16)
#define DWMCI_SET_DIV_RATIO(x) ((x) << 24)
-int exynos_dwmci_init(u32 regbase, int bus_width, int index);
-
-static inline unsigned int exynos_dwmmc_init(int index, int bus_width)
-{
- unsigned int base = samsung_get_base_mmc() + (0x10000 * index);
- return exynos_dwmci_init(base, bus_width, index);
-}
+#ifdef CONFIG_OF_CONTROL
+int exynos_dwmmc_init(const void *blob);
+#endif
+int exynos_dwmci_add_port(int index, u32 regbase, int bus_width, u32 clksel);
diff --git a/arch/arm/include/asm/arch-exynos/power.h b/arch/arm/include/asm/arch-exynos/power.h
index 3549667..44ad8d3 100644
--- a/arch/arm/include/asm/arch-exynos/power.h
+++ b/arch/arm/include/asm/arch-exynos/power.h
@@ -888,4 +888,16 @@
* source as XXTI
*/
void set_xclkout(void);
+
+/*
+ * Read inform1 to get the reset status.
+ * @return: the value can be either S5P_CHECK_SLEEP or
+ * S5P_CHECK_DIDLE or S5P_CHECK_LPA as stored in inform1
+ * if none of these then its normal booting.
+ */
+uint32_t get_reset_status(void);
+
+
+/* Read the resume function and call it */
+void power_exit_wakeup(void);
#endif
diff --git a/arch/arm/include/asm/arch-exynos/spl.h b/arch/arm/include/asm/arch-exynos/spl.h
index 46b25a6..59bb7e0 100644
--- a/arch/arm/include/asm/arch-exynos/spl.h
+++ b/arch/arm/include/asm/arch-exynos/spl.h
@@ -32,6 +32,7 @@
* pin values are the same across Exynos4 and Exynos5.
*/
BOOT_MODE_MMC = 4,
+ BOOT_MODE_EMMC = 8, /* EMMC4.4 */
BOOT_MODE_SERIAL = 20,
/* Boot based on Operating Mode pin settings */
BOOT_MODE_OM = 32,
diff --git a/arch/arm/include/asm/arch-exynos/tmu.h b/arch/arm/include/asm/arch-exynos/tmu.h
index 7e0158e..cad3569 100644
--- a/arch/arm/include/asm/arch-exynos/tmu.h
+++ b/arch/arm/include/asm/arch-exynos/tmu.h
@@ -21,38 +21,30 @@
#define __ASM_ARCH_TMU_H
struct exynos5_tmu_reg {
- unsigned triminfo;
- unsigned rsvd1;
- unsigned rsvd2;
- unsigned rsvd3;
- unsigned rsvd4;
- unsigned triminfo_control;
- unsigned rsvd5;
- unsigned rsvd6;
- unsigned tmu_control;
- unsigned rsvd7;
- unsigned tmu_status;
- unsigned sampling_internal;
- unsigned counter_value0;
- unsigned counter_value1;
- unsigned rsvd8;
- unsigned rsvd9;
- unsigned current_temp;
- unsigned rsvd10;
- unsigned rsvd11;
- unsigned rsvd12;
- unsigned threshold_temp_rise;
- unsigned threshold_temp_fall;
- unsigned rsvd13;
- unsigned rsvd14;
- unsigned past_temp3_0;
- unsigned past_temp7_4;
- unsigned past_temp11_8;
- unsigned past_temp15_12;
- unsigned inten;
- unsigned intstat;
- unsigned intclear;
- unsigned rsvd15;
- unsigned emul_con;
+ u32 triminfo;
+ u32 rsvd1[4];
+ u32 triminfo_control;
+ u32 rsvd5[2];
+ u32 tmu_control;
+ u32 rsvd7;
+ u32 tmu_status;
+ u32 sampling_internal;
+ u32 counter_value0;
+ u32 counter_value1;
+ u32 rsvd8[2];
+ u32 current_temp;
+ u32 rsvd10[3];
+ u32 threshold_temp_rise;
+ u32 threshold_temp_fall;
+ u32 rsvd13[2];
+ u32 past_temp3_0;
+ u32 past_temp7_4;
+ u32 past_temp11_8;
+ u32 past_temp15_12;
+ u32 inten;
+ u32 intstat;
+ u32 intclear;
+ u32 rsvd15;
+ u32 emul_con;
};
#endif /* __ASM_ARCH_TMU_H */
diff --git a/arch/arm/include/asm/arch-exynos/tzpc.h b/arch/arm/include/asm/arch-exynos/tzpc.h
index c5eb4b1..4d9c3a3 100644
--- a/arch/arm/include/asm/arch-exynos/tzpc.h
+++ b/arch/arm/include/asm/arch-exynos/tzpc.h
@@ -47,6 +47,26 @@
unsigned int pcellid2;
unsigned int pcellid3;
};
+
+#define EXYNOS4_NR_TZPC_BANKS 6
+#define EXYNOS5_NR_TZPC_BANKS 10
+
+/* TZPC : Register Offsets */
+#define TZPC_BASE_OFFSET 0x10000
+
+/*
+ * TZPC Register Value :
+ * R0SIZE: 0x0 : Size of secured ram
+ */
+#define R0SIZE 0x0
+
+/*
+ * TZPC Decode Protection Register Value :
+ * DECPROTXSET: 0xFF : Set Decode region to non-secure
+ */
+#define DECPROTXSET 0xFF
+void tzpc_init(void);
+
#endif
#endif
diff --git a/arch/arm/include/asm/arch-omap24xx/bits.h b/arch/arm/include/asm/arch-omap24xx/bits.h
deleted file mode 100644
index 8522335..0000000
--- a/arch/arm/include/asm/arch-omap24xx/bits.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/* bits.h
- * Copyright (c) 2004 Texas Instruments
- *
- * This package is free software; you can redistribute it and/or
- * modify it under the terms of the license found in the file
- * named COPYING that should have accompanied this file.
- *
- * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-#ifndef __bits_h
-#define __bits_h 1
-
-#define BIT0 (1<<0)
-#define BIT1 (1<<1)
-#define BIT2 (1<<2)
-#define BIT3 (1<<3)
-#define BIT4 (1<<4)
-#define BIT5 (1<<5)
-#define BIT6 (1<<6)
-#define BIT7 (1<<7)
-#define BIT8 (1<<8)
-#define BIT9 (1<<9)
-#define BIT10 (1<<10)
-#define BIT11 (1<<11)
-#define BIT12 (1<<12)
-#define BIT13 (1<<13)
-#define BIT14 (1<<14)
-#define BIT15 (1<<15)
-#define BIT16 (1<<16)
-#define BIT17 (1<<17)
-#define BIT18 (1<<18)
-#define BIT19 (1<<19)
-#define BIT20 (1<<20)
-#define BIT21 (1<<21)
-#define BIT22 (1<<22)
-#define BIT23 (1<<23)
-#define BIT24 (1<<24)
-#define BIT25 (1<<25)
-#define BIT26 (1<<26)
-#define BIT27 (1<<27)
-#define BIT28 (1<<28)
-#define BIT29 (1<<29)
-#define BIT30 (1<<30)
-#define BIT31 (1<<31)
-
-#endif
diff --git a/arch/arm/include/asm/arch-omap24xx/clocks.h b/arch/arm/include/asm/arch-omap24xx/clocks.h
deleted file mode 100644
index 2e92569..0000000
--- a/arch/arm/include/asm/arch-omap24xx/clocks.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#ifndef _OMAP24XX_CLOCKS_H_
-#define _OMAP24XX_CLOCKS_H_
-
-#define COMMIT_DIVIDERS 0x1
-
-#define MODE_BYPASS_FAST 0x2
-#define APLL_LOCK 0xc
-#ifdef CONFIG_APTIX
-#define DPLL_LOCK 0x1 /* stay in bypass mode */
-#else
-#define DPLL_LOCK 0x3 /* DPLL lock */
-#endif
-
-/****************************************************************************;
-; PRCM Scheme II
-;
-; Enable clocks and DPLL for:
-; DPLL=300, DPLLout=600 M=1,N=50 CM_CLKSEL1_PLL[21:8] 12/2*50
-; Core=600 (core domain) DPLLx2 CM_CLKSEL2_PLL[1:0]
-; MPUF=300 (mpu domain) 2 CM_CLKSEL_MPU[4:0]
-; DSPF=200 (dsp domain) 3 CM_CLKSEL_DSP[4:0]
-; DSPI=100 6 CM_CLKSEL_DSP[6:5]
-; DSP_S bypass CM_CLKSEL_DSP[7]
-; IVAF=200 (dsp domain) 3 CM_CLKSEL_DSP[12:8]
-; IVAF=100 auto
-; IVAI auto
-; IVA_MPU auto
-; IVA_S bypass CM_CLKSEL_DSP[13]
-; GFXF=50 (gfx domain) 12 CM_CLKSEL_FGX[2:0]
-; SSI_SSRF=200 3 CM_CLKSEL1_CORE[24:20]
-; SSI_SSTF=100 auto
-; L3=100Mhz (sdram) 6 CM_CLKSEL1_CORE[4:0]
-; L4=100Mhz 6
-; C_L4_USB=50 12 CM_CLKSEL1_CORE[6:5]
-***************************************************************************/
-#define II_DPLL_OUT_X2 0x2 /* x2 core out */
-#define II_MPU_DIV 0x2 /* mpu = core/2 */
-#define II_DSP_DIV 0x343 /* dsp & iva divider */
-#define II_GFX_DIV 0x2
-#define II_BUS_DIV 0x04601026
-#define II_DPLL_300 0x01832100
-
-/****************************************************************************;
-; PRCM Scheme III
-;
-; Enable clocks and DPLL for:
-; DPLL=266, DPLLout=532 M=5+1,N=133 CM_CLKSEL1_PLL[21:8] 12/6*133=266
-; Core=532 (core domain) DPLLx2 CM_CLKSEL2_PLL[1:0]
-; MPUF=266 (mpu domain) /2 CM_CLKSEL_MPU[4:0]
-; DSPF=177.3 (dsp domain) /3 CM_CLKSEL_DSP[4:0]
-; DSPI=88.67 /6 CM_CLKSEL_DSP[6:5]
-; DSP_S ACTIVATED CM_CLKSEL_DSP[7]
-; IVAF=88.67 (dsp domain) /3 CM_CLKSEL_DSP[12:8]
-; IVAF=88.67 auto
-; IVAI auto
-; IVA_MPU auto
-; IVA_S ACTIVATED CM_CLKSEL_DSP[13]
-; GFXF=66.5 (gfx domain) /8 CM_CLKSEL_FGX[2:0]:
-; SSI_SSRF=177.3 /3 CM_CLKSEL1_CORE[24:20]
-; SSI_SSTF=88.67 auto
-; L3=133Mhz (sdram) /4 CM_CLKSEL1_CORE[4:0]
-; L4=66.5Mhz /8
-; C_L4_USB=33.25 /16 CM_CLKSEL1_CORE[6:5]
-***************************************************************************/
-#define III_DPLL_OUT_X2 0x2 /* x2 core out */
-#define III_MPU_DIV 0x2 /* mpu = core/2 */
-#define III_DSP_DIV 0x23C3 /* dsp & iva divider sych enabled*/
-#define III_GFX_DIV 0x2
-#define III_BUS_DIV 0x08301044
-#define III_DPLL_266 0x01885500
-
-/* set defaults for boot up */
-#ifdef PRCM_CONFIG_II
-# define DPLL_OUT II_DPLL_OUT_X2
-# define MPU_DIV II_MPU_DIV
-# define DSP_DIV II_DSP_DIV
-# define GFX_DIV II_GFX_DIV
-# define BUS_DIV II_BUS_DIV
-# define DPLL_VAL II_DPLL_300
-#elif PRCM_CONFIG_III
-# define DPLL_OUT III_DPLL_OUT_X2
-# define MPU_DIV III_MPU_DIV
-# define DSP_DIV III_DSP_DIV
-# define GFX_DIV III_GFX_DIV
-# define BUS_DIV III_BUS_DIV
-# define DPLL_VAL III_DPLL_266
-#endif
-
-/* lock delay time out */
-#define LDELAY 12000000
-
-#endif
diff --git a/arch/arm/include/asm/arch-omap24xx/i2c.h b/arch/arm/include/asm/arch-omap24xx/i2c.h
deleted file mode 100644
index 6f64519..0000000
--- a/arch/arm/include/asm/arch-omap24xx/i2c.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#ifndef _OMAP24XX_I2C_H_
-#define _OMAP24XX_I2C_H_
-
-#define I2C_BASE1 0x48070000
-#define I2C_BASE2 0x48072000 /* nothing hooked up on h4 */
-
-#define I2C_DEFAULT_BASE I2C_BASE1
-
-struct i2c {
- unsigned short rev; /* 0x00 */
- unsigned short res1;
- unsigned short ie; /* 0x04 */
- unsigned short res2;
- unsigned short stat; /* 0x08 */
- unsigned short res3;
- unsigned short iv; /* 0x0C */
- unsigned short res4;
- unsigned short syss; /* 0x10 */
- unsigned short res4p1;
- unsigned short buf; /* 0x14 */
- unsigned short res5;
- unsigned short cnt; /* 0x18 */
- unsigned short res6;
- unsigned short data; /* 0x1C */
- unsigned short res7;
- unsigned short sysc; /* 0x20 */
- unsigned short res8;
- unsigned short con; /* 0x24 */
- unsigned short res9;
- unsigned short oa; /* 0x28 */
- unsigned short res10;
- unsigned short sa; /* 0x2C */
- unsigned short res11;
- unsigned short psc; /* 0x30 */
- unsigned short res12;
- unsigned short scll; /* 0x34 */
- unsigned short res13;
- unsigned short sclh; /* 0x38 */
- unsigned short res14;
- unsigned short systest; /* 0x3c */
- unsigned short res15;
-};
-
-#define I2C_BUS_MAX 2
-
-#endif
diff --git a/arch/arm/include/asm/arch-omap24xx/mem.h b/arch/arm/include/asm/arch-omap24xx/mem.h
deleted file mode 100644
index 42e8ab2..0000000
--- a/arch/arm/include/asm/arch-omap24xx/mem.h
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _OMAP24XX_MEM_H_
-#define _OMAP24XX_MEM_H_
-
-#define SDRC_CS0_OSET 0x0
-#define SDRC_CS1_OSET 0x30 /* mirror CS1 regs appear offset 0x30 from CS0 */
-
-#ifndef __ASSEMBLY__
-/* struct's for holding data tables for current boards, they are getting used
- early in init when NO global access are there */
-struct sdrc_data_s {
- u32 sdrc_sharing;
- u32 sdrc_mdcfg_0_ddr;
- u32 sdrc_mdcfg_0_sdr;
- u32 sdrc_actim_ctrla_0;
- u32 sdrc_actim_ctrlb_0;
- u32 sdrc_rfr_ctrl;
- u32 sdrc_mr_0_ddr;
- u32 sdrc_mr_0_sdr;
- u32 sdrc_dllab_ctrl;
-} /*__attribute__ ((packed))*/;
-typedef struct sdrc_data_s sdrc_data_t;
-
-typedef enum {
- STACKED = 0,
- IP_DDR = 1,
- COMBO_DDR = 2,
- IP_SDR = 3,
-} mem_t;
-
-#endif
-
-/* Slower full frequency range default timings for x32 operation*/
-#define H4_2420_SDRC_SHARING 0x00000100
-#define H4_2420_SDRC_MDCFG_0_SDR 0x00D04010 /* discrete sdr module */
-#define H4_2420_SDRC_MR_0_SDR 0x00000031
-#define H4_2420_SDRC_MDCFG_0_DDR 0x01702011 /* descrite ddr module */
-#define H4_2420_COMBO_MDCFG_0_DDR 0x00801011 /* combo module */
-#define H4_2420_SDRC_MR_0_DDR 0x00000032
-
-#define H4_2422_SDRC_SHARING 0x00004b00
-#define H4_2422_SDRC_MDCFG_0_DDR 0x00801011 /* stacked ddr on 2422 */
-#define H4_2422_SDRC_MR_0_DDR 0x00000032
-
-/* ES1 work around timings */
-#define H4_242x_SDRC_ACTIM_CTRLA_0_ES1 0x9bead909 /* 165Mhz for use with 100/133 */
-#define H4_242x_SDRC_ACTIM_CTRLB_0_ES1 0x00000020
-#define H4_242x_SDRC_RFR_CTRL_ES1 0x00002401 /* use over refresh for ES1 */
-
-/* optimized timings good for current shipping parts */
-#define H4_242X_SDRC_ACTIM_CTRLA_0_100MHz 0x5A59B485
-#define H4_242X_SDRC_ACTIM_CTRLB_0_100MHz 0x0000000e
-#define H4_242X_SDRC_ACTIM_CTRLA_0_133MHz 0x8BA6E6C8 /* temp warn 0 settings */
-#define H4_242X_SDRC_ACTIM_CTRLB_0_133MHz 0x00000010 /* temp warn 0 settings */
-#define H4_242X_SDRC_RFR_CTRL_100MHz 0x0002da01
-#define H4_242X_SDRC_RFR_CTRL_133MHz 0x0003de01
-#define H4_242x_SDRC_DLLAB_CTRL_100MHz 0x0000980E /* 72deg, allow DPLLout*1 to work (combo)*/
-#define H4_242x_SDRC_DLLAB_CTRL_133MHz 0x0000690E /* 72deg, for ES2 */
-
-#ifdef PRCM_CONFIG_II
-# define H4_2420_SDRC_ACTIM_CTRLA_0 H4_242X_SDRC_ACTIM_CTRLA_0_100MHz
-# define H4_2420_SDRC_ACTIM_CTRLB_0 H4_242X_SDRC_ACTIM_CTRLB_0_100MHz
-# define H4_2420_SDRC_RFR_CTRL H4_242X_SDRC_RFR_CTRL_100MHz
-# define H4_2420_SDRC_DLLAB_CTRL H4_242x_SDRC_DLLAB_CTRL_100MHz
-# define H4_2422_SDRC_ACTIM_CTRLA_0 H4_242X_SDRC_ACTIM_CTRLA_0_100MHz
-# define H4_2422_SDRC_ACTIM_CTRLB_0 H4_242X_SDRC_ACTIM_CTRLB_0_100MHz
-# define H4_2422_SDRC_RFR_CTRL H4_242X_SDRC_RFR_CTRL_100MHz
-# define H4_2422_SDRC_DLLAB_CTRL H4_242x_SDRC_DLLAB_CTRL_100MHz
-#elif PRCM_CONFIG_III
-# define H4_2420_SDRC_ACTIM_CTRLA_0 H4_242X_SDRC_ACTIM_CTRLA_0_133MHz
-# define H4_2420_SDRC_ACTIM_CTRLB_0 H4_242X_SDRC_ACTIM_CTRLB_0_133MHz
-# define H4_2420_SDRC_RFR_CTRL H4_242X_SDRC_RFR_CTRL_133MHz
-# define H4_2420_SDRC_DLLAB_CTRL H4_242x_SDRC_DLLAB_CTRL_133MHz
-# define H4_2422_SDRC_ACTIM_CTRLA_0 H4_242X_SDRC_ACTIM_CTRLA_0_100MHz
-# define H4_2422_SDRC_ACTIM_CTRLB_0 H4_242X_SDRC_ACTIM_CTRLB_0_100MHz
-# define H4_2422_SDRC_RFR_CTRL H4_242X_SDRC_RFR_CTRL_100MHz
-# define H4_2422_SDRC_DLLAB_CTRL H4_242x_SDRC_DLLAB_CTRL_100MHz
-#endif
-
-
-/* GPMC settings */
-#ifdef PRCM_CONFIG_II /* L3 at 100MHz */
-# ifdef CONFIG_SYS_NAND_BOOT
-# define H4_24XX_GPMC_CONFIG1_0 0x0
-# define H4_24XX_GPMC_CONFIG2_0 0x00141400
-# define H4_24XX_GPMC_CONFIG3_0 0x00141400
-# define H4_24XX_GPMC_CONFIG4_0 0x0F010F01
-# define H4_24XX_GPMC_CONFIG5_0 0x010C1414
-# define H4_24XX_GPMC_CONFIG6_0 0x00000A80
-# else /* else NOR */
-# define H4_24XX_GPMC_CONFIG1_0 0x3
-# define H4_24XX_GPMC_CONFIG2_0 0x000f0f01
-# define H4_24XX_GPMC_CONFIG3_0 0x00050502
-# define H4_24XX_GPMC_CONFIG4_0 0x0C060C06
-# define H4_24XX_GPMC_CONFIG5_0 0x01131F1F
-# endif /* endif CONFIG_SYS_NAND_BOOT */
-# define H4_24XX_GPMC_CONFIG7_0 (0x00000C40|(H4_CS0_BASE >> 24))
-# define H4_24XX_GPMC_CONFIG1_1 0x00011000
-# define H4_24XX_GPMC_CONFIG2_1 0x001F1F00
-# define H4_24XX_GPMC_CONFIG3_1 0x00080802
-# define H4_24XX_GPMC_CONFIG4_1 0x1C091C09
-# define H4_24XX_GPMC_CONFIG5_1 0x031A1F1F
-# define H4_24XX_GPMC_CONFIG6_1 0x000003C2
-# define H4_24XX_GPMC_CONFIG7_1 (0x00000F40|(H4_CS1_BASE >> 24))
-#endif /* endif PRCM_CONFIG_II */
-
-#ifdef PRCM_CONFIG_III /* L3 at 133MHz */
-# ifdef CONFIG_SYS_NAND_BOOT
-# define H4_24XX_GPMC_CONFIG1_0 0x0
-# define H4_24XX_GPMC_CONFIG2_0 0x00141400
-# define H4_24XX_GPMC_CONFIG3_0 0x00141400
-# define H4_24XX_GPMC_CONFIG4_0 0x0F010F01
-# define H4_24XX_GPMC_CONFIG5_0 0x010C1414
-# define H4_24XX_GPMC_CONFIG6_0 0x00000A80
-# else /* NOR boot */
-# define H4_24XX_GPMC_CONFIG1_0 0x3
-# define H4_24XX_GPMC_CONFIG2_0 0x00151501
-# define H4_24XX_GPMC_CONFIG3_0 0x00060602
-# define H4_24XX_GPMC_CONFIG4_0 0x10081008
-# define H4_24XX_GPMC_CONFIG5_0 0x01131F1F
-# define H4_24XX_GPMC_CONFIG6_0 0x000004c4
-# endif /* endif CONFIG_SYS_NAND_BOOT */
-# define H4_24XX_GPMC_CONFIG7_0 (0x00000C40|(H4_CS0_BASE >> 24))
-# define H4_24XX_GPMC_CONFIG1_1 0x00011000
-# define H4_24XX_GPMC_CONFIG2_1 0x001f1f01
-# define H4_24XX_GPMC_CONFIG3_1 0x00080803
-# define H4_24XX_GPMC_CONFIG4_1 0x1C091C09
-# define H4_24XX_GPMC_CONFIG5_1 0x041f1F1F
-# define H4_24XX_GPMC_CONFIG6_1 0x000004C4
-# define H4_24XX_GPMC_CONFIG7_1 (0x00000F40|(H4_CS1_BASE >> 24))
-#endif /* endif CONFIG_SYS_PRCM_III */
-
-#endif /* endif _OMAP24XX_MEM_H_ */
diff --git a/arch/arm/include/asm/arch-omap24xx/mux.h b/arch/arm/include/asm/arch-omap24xx/mux.h
deleted file mode 100644
index 4fdb9c6..0000000
--- a/arch/arm/include/asm/arch-omap24xx/mux.h
+++ /dev/null
@@ -1,176 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#ifndef _OMAP2420_MUX_H_
-#define _OMAP2420_MUX_H_
-
-#ifndef __ASSEMBLY__
-typedef unsigned char uint8;
-typedef unsigned int uint32;
-
-void muxSetupSDRC(void);
-void muxSetupGPMC(void);
-void muxSetupUsb0(void);
-void muxSetupUsbHost(void);
-void muxSetupUart3(void);
-void muxSetupI2C1(void);
-void muxSetupUART1(void);
-void muxSetupLCD(void);
-void muxSetupCamera(void);
-void muxSetupMMCSD(void) ;
-void muxSetupTouchScreen(void) ;
-void muxSetupHDQ(void);
-#endif
-
-#define USB_OTG_CTRL ((volatile uint32 *)0x4805E30C)
-
-/* Pin Muxing registers used for HDQ (Smart battery) */
-#define CONTROL_PADCONF_HDQ_SIO ((volatile unsigned char *)0x48000115)
-
-/* Pin Muxing registers used for GPMC */
-#define CONTROL_PADCONF_GPMC_D2_BYTE0 ((volatile unsigned char *)0x48000088)
-#define CONTROL_PADCONF_GPMC_D2_BYTE1 ((volatile unsigned char *)0x48000089)
-#define CONTROL_PADCONF_GPMC_D2_BYTE2 ((volatile unsigned char *)0x4800008A)
-#define CONTROL_PADCONF_GPMC_D2_BYTE3 ((volatile unsigned char *)0x4800008B)
-
-#define CONTROL_PADCONF_GPMC_NCS0_BYTE0 ((volatile unsigned char *)0x4800008C)
-#define CONTROL_PADCONF_GPMC_NCS0_BYTE1 ((volatile unsigned char *)0x4800008D)
-#define CONTROL_PADCONF_GPMC_NCS0_BYTE2 ((volatile unsigned char *)0x4800008E)
-#define CONTROL_PADCONF_GPMC_NCS0_BYTE3 ((volatile unsigned char *)0x4800008F)
-#define CONTROL_PADCONF_GPMC_NCS0_BYTE4 (0x48000090)
-#define CONTROL_PADCONF_GPMC_NCS0_BYTE5 (0x48000091)
-#define CONTROL_PADCONF_GPMC_NCS0_BYTE6 (0x48000092)
-#define CONTROL_PADCONF_GPMC_NCS0_BYTE7 (0x48000093)
-
-/* Pin Muxing registers used for SDRC */
-#define CONTROL_PADCONF_SDRC_NCS0_BYTE0 ((volatile unsigned char *)0x480000A0)
-#define CONTROL_PADCONF_SDRC_NCS0_BYTE1 ((volatile unsigned char *)0x480000A1)
-#define CONTROL_PADCONF_SDRC_NCS0_BYTE2 ((volatile unsigned char *)0x480000A2)
-#define CONTROL_PADCONF_SDRC_NCS0_BYTE3 ((volatile unsigned char *)0x480000A3)
-
-#define CONTROL_PADCONF_SDRC_A14_BYTE0 ((volatile unsigned char *)0x48000030)
-#define CONTROL_PADCONF_SDRC_A14_BYTE1 ((volatile unsigned char *)0x48000031)
-#define CONTROL_PADCONF_SDRC_A14_BYTE2 ((volatile unsigned char *)0x48000032)
-#define CONTROL_PADCONF_SDRC_A14_BYTE3 ((volatile unsigned char *)0x48000033)
-
-/* Pin Muxing registers used for Touch Screen (SPI) */
-#define CONTROL_PADCONF_SPI1_CLK ((volatile unsigned char *)0x480000FF)
-#define CONTROL_PADCONF_SPI1_SIMO ((volatile unsigned char *)0x48000100)
-#define CONTROL_PADCONF_SPI1_SOMI ((volatile unsigned char *)0x48000101)
-#define CONTROL_PADCONF_SPI1_NCS0 ((volatile unsigned char *)0x48000102)
-#define CONTROL_PADCONF_SPI1_NCS1 (0x48000103)
-
-#define CONTROL_PADCONF_MCBSP1_FSR ((volatile unsigned char *)0x4800010B)
-
-/* Pin Muxing registers used for MMCSD */
-#define CONTROL_PADCONF_MMC_CLKI ((volatile unsigned char *)0x480000FE)
-#define CONTROL_PADCONF_MMC_CLKO ((volatile unsigned char *)0x480000F3)
-#define CONTROL_PADCONF_MMC_CMD ((volatile unsigned char *)0x480000F4)
-#define CONTROL_PADCONF_MMC_DAT0 ((volatile unsigned char *)0x480000F5)
-#define CONTROL_PADCONF_MMC_DAT1 ((volatile unsigned char *)0x480000F6)
-#define CONTROL_PADCONF_MMC_DAT2 ((volatile unsigned char *)0x480000F7)
-#define CONTROL_PADCONF_MMC_DAT3 ((volatile unsigned char *)0x480000F8)
-#define CONTROL_PADCONF_MMC_DAT_DIR0 ((volatile unsigned char *)0x480000F9)
-#define CONTROL_PADCONF_MMC_DAT_DIR1 ((volatile unsigned char *)0x480000FA)
-#define CONTROL_PADCONF_MMC_DAT_DIR2 ((volatile unsigned char *)0x480000FB)
-#define CONTROL_PADCONF_MMC_DAT_DIR3 ((volatile unsigned char *)0x480000FC)
-#define CONTROL_PADCONF_MMC_CMD_DIR ((volatile unsigned char *)0x480000FD)
-
-#define CONTROL_PADCONF_SDRC_A14 ((volatile unsigned char *)0x48000030)
-#define CONTROL_PADCONF_SDRC_A13 ((volatile unsigned char *)0x48000031)
-
-/* Pin Muxing registers used for CAMERA */
-#define CONTROL_PADCONF_SYS_NRESWARM ((volatile unsigned char *)0x4800012B)
-
-#define CONTROL_PADCONF_CAM_XCLK ((volatile unsigned char *)0x480000DC)
-#define CONTROL_PADCONF_CAM_LCLK ((volatile unsigned char *)0x480000DB)
-#define CONTROL_PADCONF_CAM_VS ((volatile unsigned char *)0x480000DA)
-#define CONTROL_PADCONF_CAM_HS ((volatile unsigned char *)0x480000D9)
-#define CONTROL_PADCONF_CAM_D0 ((volatile unsigned char *)0x480000D8)
-#define CONTROL_PADCONF_CAM_D1 ((volatile unsigned char *)0x480000D7)
-#define CONTROL_PADCONF_CAM_D2 ((volatile unsigned char *)0x480000D6)
-#define CONTROL_PADCONF_CAM_D3 ((volatile unsigned char *)0x480000D5)
-#define CONTROL_PADCONF_CAM_D4 ((volatile unsigned char *)0x480000D4)
-#define CONTROL_PADCONF_CAM_D5 ((volatile unsigned char *)0x480000D3)
-#define CONTROL_PADCONF_CAM_D6 ((volatile unsigned char *)0x480000D2)
-#define CONTROL_PADCONF_CAM_D7 ((volatile unsigned char *)0x480000D1)
-#define CONTROL_PADCONF_CAM_D8 ((volatile unsigned char *)0x480000D0)
-#define CONTROL_PADCONF_CAM_D9 ((volatile unsigned char *)0x480000CF)
-
-/* Pin Muxing registers used for LCD */
-#define CONTROL_PADCONF_DSS_D0 ((volatile unsigned char *)0x480000B3)
-#define CONTROL_PADCONF_DSS_D1 ((volatile unsigned char *)0x480000B4)
-#define CONTROL_PADCONF_DSS_D2 ((volatile unsigned char *)0x480000B5)
-#define CONTROL_PADCONF_DSS_D3 ((volatile unsigned char *)0x480000B6)
-#define CONTROL_PADCONF_DSS_D4 ((volatile unsigned char *)0x480000B7)
-#define CONTROL_PADCONF_DSS_D5 ((volatile unsigned char *)0x480000B8)
-#define CONTROL_PADCONF_DSS_D6 ((volatile unsigned char *)0x480000B9)
-#define CONTROL_PADCONF_DSS_D7 ((volatile unsigned char *)0x480000BA)
-#define CONTROL_PADCONF_DSS_D8 ((volatile unsigned char *)0x480000BB)
-#define CONTROL_PADCONF_DSS_D9 ((volatile unsigned char *)0x480000BC)
-#define CONTROL_PADCONF_DSS_D10 ((volatile unsigned char *)0x480000BD)
-#define CONTROL_PADCONF_DSS_D11 ((volatile unsigned char *)0x480000BE)
-#define CONTROL_PADCONF_DSS_D12 ((volatile unsigned char *)0x480000BF)
-#define CONTROL_PADCONF_DSS_D13 ((volatile unsigned char *)0x480000C0)
-#define CONTROL_PADCONF_DSS_D14 ((volatile unsigned char *)0x480000C1)
-#define CONTROL_PADCONF_DSS_D15 ((volatile unsigned char *)0x480000C2)
-#define CONTROL_PADCONF_DSS_D16 ((volatile unsigned char *)0x480000C3)
-#define CONTROL_PADCONF_DSS_D17 ((volatile unsigned char *)0x480000C4)
-#define CONTROL_PADCONF_DSS_PCLK ((volatile unsigned char *)0x480000CB)
-#define CONTROL_PADCONF_DSS_VSYNC ((volatile unsigned char *)0x480000CC)
-#define CONTROL_PADCONF_DSS_HSYNC ((volatile unsigned char *)0x480000CD)
-#define CONTROL_PADCONF_DSS_ACBIAS ((volatile unsigned char *)0x480000CE)
-
-/* Pin Muxing registers used for UART1 */
-#define CONTROL_PADCONF_UART1_CTS ((volatile unsigned char *)0x480000C5)
-#define CONTROL_PADCONF_UART1_RTS ((volatile unsigned char *)0x480000C6)
-#define CONTROL_PADCONF_UART1_TX ((volatile unsigned char *)0x480000C7)
-#define CONTROL_PADCONF_UART1_RX ((volatile unsigned char *)0x480000C8)
-
-/* Pin Muxing registers used for I2C1 */
-#define CONTROL_PADCONF_I2C1_SCL ((volatile unsigned char *)0x48000111)
-#define CONTROL_PADCONF_I2C1_SDA ((volatile unsigned char *)0x48000112)
-
-/* Pin Muxing registres used for USB0. */
-#define CONTROL_PADCONF_USB0_PUEN ((volatile uint8 *)0x4800011D)
-#define CONTROL_PADCONF_USB0_VP ((volatile uint8 *)0x4800011E)
-#define CONTROL_PADCONF_USB0_VM ((volatile uint8 *)0x4800011F)
-#define CONTROL_PADCONF_USB0_RCV ((volatile uint8 *)0x48000120)
-#define CONTROL_PADCONF_USB0_TXEN ((volatile uint8 *)0x48000121)
-#define CONTROL_PADCONF_USB0_SE0 ((volatile uint8 *)0x48000122)
-#define CONTROL_PADCONF_USB0_DAT ((volatile uint8 *)0x48000123)
-
-/* Pin Muxing registres used for USB1. */
-#define CONTROL_PADCONF_USB1_RCV (0x480000EB)
-#define CONTROL_PADCONF_USB1_TXEN (0x480000EC)
-
-/* Pin Muxing registers used for UART3/IRDA */
-#define CONTROL_PADCONF_UART3_TX_IRTX ((volatile uint8 *)0x48000118)
-#define CONTROL_PADCONF_UART3_RX_IRRX ((volatile uint8 *)0x48000119)
-
-/* Pin Muxing registers used for GPIO */
-#define CONTROL_PADCONF_GPIO69 (0x480000ED)
-#define CONTROL_PADCONF_GPIO70 (0x480000EE)
-#define CONTROL_PADCONF_GPIO102 (0x48000116)
-#define CONTROL_PADCONF_GPIO103 (0x48000117)
-#define CONTROL_PADCONF_GPIO104 (0x48000118)
-#define CONTROL_PADCONF_GPIO105 (0x48000119)
-
-#endif
diff --git a/arch/arm/include/asm/arch-omap24xx/omap2420.h b/arch/arm/include/asm/arch-omap24xx/omap2420.h
deleted file mode 100644
index 5724f5d..0000000
--- a/arch/arm/include/asm/arch-omap24xx/omap2420.h
+++ /dev/null
@@ -1,236 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _OMAP2420_SYS_H_
-#define _OMAP2420_SYS_H_
-
-#include <asm/sizes.h>
-
-/*
- * 2420 specific Section
- */
-
-/* L3 Firewall */
-#define A_REQINFOPERM0 0x68005048
-#define A_READPERM0 0x68005050
-#define A_WRITEPERM0 0x68005058
-/* #define GP_DEVICE (BIT8|BIT9) FIXME -- commented out to make compile -- FIXME */
-
-/* L3 Firewall */
-#define A_REQINFOPERM0 0x68005048
-#define A_READPERM0 0x68005050
-#define A_WRITEPERM0 0x68005058
-
-/* CONTROL */
-#define OMAP2420_CTRL_BASE (0x48000000)
-#define CONTROL_STATUS (OMAP2420_CTRL_BASE + 0x2F8)
-
-/* device type */
-#define TST_DEVICE 0x0
-#define EMU_DEVICE 0x1
-#define HS_DEVICE 0x2
-#define GP_DEVICE 0x3
-
-/* TAP information */
-#define OMAP2420_TAP_BASE (0x48014000)
-#define TAP_IDCODE_REG (OMAP2420_TAP_BASE+0x204)
-#define PRODUCTION_ID (OMAP2420_TAP_BASE+0x208)
-
-/* GPMC */
-#define OMAP2420_GPMC_BASE (0x6800A000)
-#define GPMC_SYSCONFIG (OMAP2420_GPMC_BASE+0x10)
-#define GPMC_IRQENABLE (OMAP2420_GPMC_BASE+0x1C)
-#define GPMC_TIMEOUT_CONTROL (OMAP2420_GPMC_BASE+0x40)
-#define GPMC_CONFIG (OMAP2420_GPMC_BASE+0x50)
-#define GPMC_CONFIG1_0 (OMAP2420_GPMC_BASE+0x60)
-#define GPMC_CONFIG2_0 (OMAP2420_GPMC_BASE+0x64)
-#define GPMC_CONFIG3_0 (OMAP2420_GPMC_BASE+0x68)
-#define GPMC_CONFIG4_0 (OMAP2420_GPMC_BASE+0x6C)
-#define GPMC_CONFIG5_0 (OMAP2420_GPMC_BASE+0x70)
-#define GPMC_CONFIG6_0 (OMAP2420_GPMC_BASE+0x74)
-#define GPMC_CONFIG7_0 (OMAP2420_GPMC_BASE+0x78)
-#define GPMC_CONFIG1_1 (OMAP2420_GPMC_BASE+0x90)
-#define GPMC_CONFIG2_1 (OMAP2420_GPMC_BASE+0x94)
-#define GPMC_CONFIG3_1 (OMAP2420_GPMC_BASE+0x98)
-#define GPMC_CONFIG4_1 (OMAP2420_GPMC_BASE+0x9C)
-#define GPMC_CONFIG5_1 (OMAP2420_GPMC_BASE+0xA0)
-#define GPMC_CONFIG6_1 (OMAP2420_GPMC_BASE+0xA4)
-#define GPMC_CONFIG7_1 (OMAP2420_GPMC_BASE+0xA8)
-#define GPMC_CONFIG1_2 (OMAP2420_GPMC_BASE+0xC0)
-#define GPMC_CONFIG2_2 (OMAP2420_GPMC_BASE+0xC4)
-#define GPMC_CONFIG3_2 (OMAP2420_GPMC_BASE+0xC8)
-#define GPMC_CONFIG4_2 (OMAP2420_GPMC_BASE+0xCC)
-#define GPMC_CONFIG5_2 (OMAP2420_GPMC_BASE+0xD0)
-#define GPMC_CONFIG6_2 (OMAP2420_GPMC_BASE+0xD4)
-#define GPMC_CONFIG7_2 (OMAP2420_GPMC_BASE+0xD8)
-#define GPMC_CONFIG1_3 (OMAP2420_GPMC_BASE+0xF0)
-#define GPMC_CONFIG2_3 (OMAP2420_GPMC_BASE+0xF4)
-#define GPMC_CONFIG3_3 (OMAP2420_GPMC_BASE+0xF8)
-#define GPMC_CONFIG4_3 (OMAP2420_GPMC_BASE+0xFC)
-#define GPMC_CONFIG5_3 (OMAP2420_GPMC_BASE+0x100)
-#define GPMC_CONFIG6_3 (OMAP2420_GPMC_BASE+0x104)
-#define GPMC_CONFIG7_3 (OMAP2420_GPMC_BASE+0x108)
-
-/* SMS */
-#define OMAP2420_SMS_BASE 0x68008000
-#define SMS_SYSCONFIG (OMAP2420_SMS_BASE+0x10)
-#define SMS_CLASS_ARB0 (OMAP2420_SMS_BASE+0xD0)
-# define BURSTCOMPLETE_GROUP7 BIT31
-
-/* SDRC */
-#define OMAP2420_SDRC_BASE 0x68009000
-#define SDRC_SYSCONFIG (OMAP2420_SDRC_BASE+0x10)
-#define SDRC_STATUS (OMAP2420_SDRC_BASE+0x14)
-#define SDRC_CS_CFG (OMAP2420_SDRC_BASE+0x40)
-#define SDRC_SHARING (OMAP2420_SDRC_BASE+0x44)
-#define SDRC_DLLA_CTRL (OMAP2420_SDRC_BASE+0x60)
-#define SDRC_DLLB_CTRL (OMAP2420_SDRC_BASE+0x68)
-#define SDRC_POWER (OMAP2420_SDRC_BASE+0x70)
-#define SDRC_MCFG_0 (OMAP2420_SDRC_BASE+0x80)
-#define SDRC_MR_0 (OMAP2420_SDRC_BASE+0x84)
-#define SDRC_ACTIM_CTRLA_0 (OMAP2420_SDRC_BASE+0x9C)
-#define SDRC_ACTIM_CTRLB_0 (OMAP2420_SDRC_BASE+0xA0)
-#define SDRC_ACTIM_CTRLA_1 (OMAP2420_SDRC_BASE+0xC4)
-#define SDRC_ACTIM_CTRLB_1 (OMAP2420_SDRC_BASE+0xC8)
-#define SDRC_RFR_CTRL (OMAP2420_SDRC_BASE+0xA4)
-#define SDRC_MANUAL_0 (OMAP2420_SDRC_BASE+0xA8)
-#define OMAP2420_SDRC_CS0 0x80000000
-#define OMAP2420_SDRC_CS1 0xA0000000
-#define CMD_NOP 0x0
-#define CMD_PRECHARGE 0x1
-#define CMD_AUTOREFRESH 0x2
-#define CMD_ENTR_PWRDOWN 0x3
-#define CMD_EXIT_PWRDOWN 0x4
-#define CMD_ENTR_SRFRSH 0x5
-#define CMD_CKE_HIGH 0x6
-#define CMD_CKE_LOW 0x7
-#define SOFTRESET BIT1
-#define SMART_IDLE (0x2 << 3)
-#define REF_ON_IDLE (0x1 << 6)
-
-
-/* UART */
-#define OMAP2420_UART1 0x4806A000
-#define OMAP2420_UART2 0x4806C000
-#define OMAP2420_UART3 0x4806E000
-
-/* General Purpose Timers */
-#define OMAP2420_GPT1 0x48028000
-#define OMAP2420_GPT2 0x4802A000
-#define OMAP2420_GPT3 0x48078000
-#define OMAP2420_GPT4 0x4807A000
-#define OMAP2420_GPT5 0x4807C000
-#define OMAP2420_GPT6 0x4807E000
-#define OMAP2420_GPT7 0x48080000
-#define OMAP2420_GPT8 0x48082000
-#define OMAP2420_GPT9 0x48084000
-#define OMAP2420_GPT10 0x48086000
-#define OMAP2420_GPT11 0x48088000
-#define OMAP2420_GPT12 0x4808A000
-
-/* timer regs offsets (32 bit regs) */
-#define TIDR 0x0 /* r */
-#define TIOCP_CFG 0x10 /* rw */
-#define TISTAT 0x14 /* r */
-#define TISR 0x18 /* rw */
-#define TIER 0x1C /* rw */
-#define TWER 0x20 /* rw */
-#define TCLR 0x24 /* rw */
-#define TCRR 0x28 /* rw */
-#define TLDR 0x2C /* rw */
-#define TTGR 0x30 /* rw */
-#define TWPS 0x34 /* r */
-#define TMAR 0x38 /* rw */
-#define TCAR1 0x3c /* r */
-#define TSICR 0x40 /* rw */
-#define TCAR2 0x44 /* r */
-
-/* WatchDog Timers (1 secure, 3 GP) */
-#define WD1_BASE 0x48020000
-#define WD2_BASE 0x48022000
-#define WD3_BASE 0x48024000
-#define WD4_BASE 0x48026000
-#define WWPS 0x34 /* r */
-#define WSPR 0x48 /* rw */
-#define WD_UNLOCK1 0xAAAA
-#define WD_UNLOCK2 0x5555
-
-/* PRCM */
-#define OMAP2420_CM_BASE 0x48008000
-#define PRCM_CLKCFG_CTRL (OMAP2420_CM_BASE+0x080)
-#define CM_CLKSEL_MPU (OMAP2420_CM_BASE+0x140)
-#define CM_FCLKEN1_CORE (OMAP2420_CM_BASE+0x200)
-#define CM_FCLKEN2_CORE (OMAP2420_CM_BASE+0x204)
-#define CM_ICLKEN1_CORE (OMAP2420_CM_BASE+0x210)
-#define CM_ICLKEN2_CORE (OMAP2420_CM_BASE+0x214)
-#define CM_CLKSEL1_CORE (OMAP2420_CM_BASE+0x240)
-#define CM_CLKSEL_WKUP (OMAP2420_CM_BASE+0x440)
-#define CM_CLKSEL2_CORE (OMAP2420_CM_BASE+0x244)
-#define CM_CLKSEL_GFX (OMAP2420_CM_BASE+0x340)
-#define PM_RSTCTRL_WKUP (OMAP2420_CM_BASE+0x450)
-#define CM_CLKEN_PLL (OMAP2420_CM_BASE+0x500)
-#define CM_IDLEST_CKGEN (OMAP2420_CM_BASE+0x520)
-#define CM_CLKSEL1_PLL (OMAP2420_CM_BASE+0x540)
-#define CM_CLKSEL2_PLL (OMAP2420_CM_BASE+0x544)
-#define CM_CLKSEL_DSP (OMAP2420_CM_BASE+0x840)
-
-/*
- * H4 specific Section
- */
-
-/*
- * The 2420's chip selects are programmable. The mask ROM
- * does configure CS0 to 0x08000000 before dispatch. So, if
- * you want your code to live below that address, you have to
- * be prepared to jump though hoops, to reset the base address.
- */
-#if defined(CONFIG_OMAP2420H4)
-/* GPMC */
-#ifdef CONFIG_VIRTIO_A /* Pre version B */
-# define H4_CS0_BASE 0x08000000 /* flash (64 Meg aligned) */
-# define H4_CS1_BASE 0x04000000 /* debug board */
-# define H4_CS2_BASE 0x0A000000 /* wifi board */
-#else
-# define H4_CS0_BASE 0x08000000 /* flash (64 Meg aligned) */
-# define H4_CS1_BASE 0x04000000 /* debug board */
-# define H4_CS2_BASE 0x0C000000 /* wifi board */
-#endif
-
-/* base address for indirect vectors (internal boot mode) */
-#define SRAM_OFFSET0 0x40000000
-#define SRAM_OFFSET1 0x00200000
-#define SRAM_OFFSET2 0x0000F800
-#define SRAM_VECT_CODE (SRAM_OFFSET0|SRAM_OFFSET1|SRAM_OFFSET2)
-
-/* FPGA on Debug board.*/
-#define ETH_CONTROL_REG (H4_CS1_BASE+0x30b)
-#define LAN_RESET_REGISTER (H4_CS1_BASE+0x1c)
-#endif /* endif CONFIG_2420H4 */
-
-/* Common */
-#define LOW_LEVEL_SRAM_STACK 0x4020FFFC
-
-#define PERIFERAL_PORT_BASE 0x480FE003
-
-#endif
diff --git a/arch/arm/include/asm/arch-omap24xx/sys_info.h b/arch/arm/include/asm/arch-omap24xx/sys_info.h
deleted file mode 100644
index 53c231a..0000000
--- a/arch/arm/include/asm/arch-omap24xx/sys_info.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _OMAP24XX_SYS_INFO_H_
-#define _OMAP24XX_SYS_INFO_H_
-
-typedef struct h4_system_data {
- /* base board info */
- u32 base_b_rev; /* rev from base board i2c */
- /* cpu board info */
- u32 cpu_b_rev; /* rev from cpu board i2c */
- u32 cpu_b_mux; /* mux type on daughter board */
- u32 cpu_b_ddr_type; /* mem type */
- u32 cpu_b_ddr_speed; /* ddr speed rating */
- u32 cpu_b_switches; /* boot ctrl switch settings */
- /* cpu info */
- u32 cpu_type; /* type of cpu; 2420, 2422, 2430,...*/
- u32 cpu_rev; /* rev of given cpu; ES1, ES2,...*/
-} h4_sys_data;
-
-#define XDR_POP 5 /* package on package part */
-#define SDR_DISCRETE 4 /* 128M memory SDR module*/
-#define DDR_STACKED 3 /* stacked part on 2422 */
-#define DDR_COMBO 2 /* combo part on cpu daughter card (menalaeus) */
-#define DDR_DISCRETE 1 /* 2x16 parts on daughter card */
-
-#define DDR_100 100 /* type found on most mem d-boards */
-#define DDR_111 111 /* some combo parts */
-#define DDR_133 133 /* most combo, some mem d-boards */
-#define DDR_165 165 /* future parts */
-
-#define CPU_2420 0x2420
-#define CPU_2422 0x2422 /* 2420 + 64M stacked */
-#define CPU_2423 0x2423 /* 2420 + 96M stacked */
-
-#define CPU_2422_ES1 1
-#define CPU_2422_ES2 2
-#define CPU_2420_ES1 1
-#define CPU_2420_ES2 2
-#define CPU_2420_2422_ES1 1
-
-#define CPU_2420_CHIPID 0x0B5D9000
-#define CPU_24XX_ID_MASK 0x0FFFF000
-#define CPU_242X_REV_MASK 0xF0000000
-#define CPU_242X_PID_MASK 0x000F0000
-
-#define BOARD_H4_MENELAUS 1
-#define BOARD_H4_SDP 2
-
-#define GPMC_MUXED 1
-#define GPMC_NONMUXED 0
-
-#define TYPE_NAND 0x800 /* bit pos for nand in gpmc reg */
-#define TYPE_NOR 0x000
-
-#define WIDTH_8BIT 0x0000
-#define WIDTH_16BIT 0x1000 /* bit pos for 16 bit in gpmc */
-
-#define I2C_MENELAUS 0x72 /* i2c id for companion chip */
-
-#endif
diff --git a/arch/arm/include/asm/arch-omap24xx/sys_proto.h b/arch/arm/include/asm/arch-omap24xx/sys_proto.h
deleted file mode 100644
index 9d8e5b2..0000000
--- a/arch/arm/include/asm/arch-omap24xx/sys_proto.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#ifndef _OMAP24XX_SYS_PROTO_H_
-#define _OMAP24XX_SYS_PROTO_H_
-
-void prcm_init(void);
-void memif_init(void);
-void sdrc_init(void);
-void do_sdrc_init(u32,u32);
-void gpmc_init(void);
-
-void ether_init(void);
-void watchdog_init(void);
-void set_muxconf_regs(void);
-void peripheral_enable(void);
-
-u32 get_cpu_type(void);
-u32 get_cpu_rev(void);
-u32 get_mem_type(void);
-u32 get_sysboot_value(void);
-u32 get_gpmc0_base(void);
-u32 is_gpmc_muxed(void);
-u32 get_gpmc0_type(void);
-u32 get_gpmc0_width(void);
-u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound);
-u32 get_board_type(void);
-void display_board_info(u32);
-void update_mux(u32,u32);
-u32 get_sdr_cs_size(u32 offset);
-
-u32 running_in_sdram(void);
-u32 running_in_sram(void);
-u32 running_in_flash(void);
-u32 running_from_internal_boot(void);
-u32 get_device_type(void);
-#endif
diff --git a/arch/arm/include/asm/arch-omap3/clocks.h b/arch/arm/include/asm/arch-omap3/clock.h
similarity index 100%
rename from arch/arm/include/asm/arch-omap3/clocks.h
rename to arch/arm/include/asm/arch-omap3/clock.h
diff --git a/arch/arm/include/asm/arch-omap3/gpio.h b/arch/arm/include/asm/arch-omap3/gpio.h
index 8bba3b0..d72f5e5 100644
--- a/arch/arm/include/asm/arch-omap3/gpio.h
+++ b/arch/arm/include/asm/arch-omap3/gpio.h
@@ -40,6 +40,8 @@
#include <asm/omap_gpio.h>
+#define OMAP_MAX_GPIO 192
+
#define OMAP34XX_GPIO1_BASE 0x48310000
#define OMAP34XX_GPIO2_BASE 0x49050000
#define OMAP34XX_GPIO3_BASE 0x49052000
diff --git a/arch/arm/include/asm/arch-omap3/omap3.h b/arch/arm/include/asm/arch-omap3/omap3.h
index 2b5e9ae..c57599a 100644
--- a/arch/arm/include/asm/arch-omap3/omap3.h
+++ b/arch/arm/include/asm/arch-omap3/omap3.h
@@ -253,4 +253,11 @@
#define OMAP3_EMU_HAL_START_HAL_CRITICAL 4
+/* ABB settings */
+#define OMAP_ABB_SETTLING_TIME 30
+#define OMAP_ABB_CLOCK_CYCLES 8
+
+/* ABB tranxdone mask */
+#define OMAP_ABB_MPU_TXDONE_MASK (0x1 << 26)
+
#endif
diff --git a/arch/arm/include/asm/arch-omap4/clocks.h b/arch/arm/include/asm/arch-omap4/clock.h
similarity index 89%
rename from arch/arm/include/asm/arch-omap4/clocks.h
rename to arch/arm/include/asm/arch-omap4/clock.h
index ed7a1c8..d14d8fb 100644
--- a/arch/arm/include/asm/arch-omap4/clocks.h
+++ b/arch/arm/include/asm/arch-omap4/clock.h
@@ -34,25 +34,6 @@
*/
#define LDELAY 1000000
-#define CM_CLKMODE_DPLL_CORE 0x4A004120
-#define CM_CLKMODE_DPLL_PER 0x4A008140
-#define CM_CLKMODE_DPLL_MPU 0x4A004160
-#define CM_CLKSEL_CORE 0x4A004100
-
-/* DPLL register offsets */
-#define CM_CLKMODE_DPLL 0
-#define CM_IDLEST_DPLL 0x4
-#define CM_AUTOIDLE_DPLL 0x8
-#define CM_CLKSEL_DPLL 0xC
-#define CM_DIV_M2_DPLL 0x10
-#define CM_DIV_M3_DPLL 0x14
-#define CM_DIV_M4_DPLL 0x18
-#define CM_DIV_M5_DPLL 0x1C
-#define CM_DIV_M6_DPLL 0x20
-#define CM_DIV_M7_DPLL 0x24
-
-#define DPLL_CLKOUT_DIV_MASK 0x1F /* post-divider mask */
-
/* CM_DLL_CTRL */
#define CM_DLL_CTRL_OVERRIDE_SHIFT 0
#define CM_DLL_CTRL_OVERRIDE_MASK (1 << 0)
@@ -94,10 +75,8 @@
#define CM_CLKSEL_DCC_EN_SHIFT 22
#define CM_CLKSEL_DCC_EN_MASK (1 << 22)
-#define OMAP4_DPLL_MAX_N 127
-
/* CM_SYS_CLKSEL */
-#define CM_SYS_CLKSEL_SYS_CLKSEL_MASK 7
+#define CM_SYS_CLKSEL_SYS_CLKSEL_MASK 7
/* CM_CLKSEL_CORE */
#define CLKSEL_CORE_SHIFT 0
@@ -181,9 +160,7 @@
#define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK (1 << 25)
/* Clock frequencies */
-#define OMAP_SYS_CLK_FREQ_38_4_MHZ 38400000
#define OMAP_SYS_CLK_IND_38_4_MHZ 6
-#define OMAP_32K_CLK_FREQ 32768
/* PRM_VC_VAL_BYPASS */
#define PRM_VC_I2C_CHANNEL_FREQ_KHZ 400
@@ -234,14 +211,13 @@
#define ALTCLKSRC_MODE_ACTIVE 1
-/* Defines for DPLL setup */
-#define DPLL_LOCKED_FREQ_TOLERANCE_0 0
-#define DPLL_LOCKED_FREQ_TOLERANCE_500_KHZ 500
-#define DPLL_LOCKED_FREQ_TOLERANCE_1_MHZ 1000
-
#define DPLL_NO_LOCK 0
#define DPLL_LOCK 1
+/* Clock Defines */
+#define V_OSCK 38400000 /* Clock output from T2 */
+#define V_SCLK V_OSCK
+
struct omap4_scrm_regs {
u32 revision; /* 0x0000 */
u32 pad00[63];
diff --git a/arch/arm/include/asm/arch-omap4/cpu.h b/arch/arm/include/asm/arch-omap4/cpu.h
index 3a0bfbf..311c6ff 100644
--- a/arch/arm/include/asm/arch-omap4/cpu.h
+++ b/arch/arm/include/asm/arch-omap4/cpu.h
@@ -115,18 +115,6 @@
#define WD_UNLOCK1 0xAAAA
#define WD_UNLOCK2 0x5555
-#define SYSCLKDIV_1 (0x1 << 6)
-#define SYSCLKDIV_2 (0x1 << 7)
-
-#define CLKSEL_GPT1 (0x1 << 0)
-
-#define EN_GPT1 (0x1 << 0)
-#define EN_32KSYNC (0x1 << 2)
-
-#define ST_WDT2 (0x1 << 5)
-
-#define RESETDONE (0x1 << 0)
-
#define TCLR_ST (0x1 << 0)
#define TCLR_AR (0x1 << 1)
#define TCLR_PRE (0x1 << 5)
diff --git a/arch/arm/include/asm/arch-omap4/gpio.h b/arch/arm/include/asm/arch-omap4/gpio.h
index 26f19d1..fdf65ed 100644
--- a/arch/arm/include/asm/arch-omap4/gpio.h
+++ b/arch/arm/include/asm/arch-omap4/gpio.h
@@ -40,6 +40,8 @@
#include <asm/omap_gpio.h>
+#define OMAP_MAX_GPIO 192
+
#define OMAP44XX_GPIO1_BASE 0x4A310000
#define OMAP44XX_GPIO2_BASE 0x48055000
#define OMAP44XX_GPIO3_BASE 0x48057000
diff --git a/arch/arm/include/asm/arch-omap4/omap.h b/arch/arm/include/asm/arch-omap4/omap.h
index e9a6ffe..66afd92 100644
--- a/arch/arm/include/asm/arch-omap4/omap.h
+++ b/arch/arm/include/asm/arch-omap4/omap.h
@@ -47,14 +47,6 @@
#define DRAM_ADDR_SPACE_START OMAP44XX_DRAM_ADDR_SPACE_START
#define DRAM_ADDR_SPACE_END OMAP44XX_DRAM_ADDR_SPACE_END
-/* CONTROL */
-#define CTRL_BASE (OMAP44XX_L4_CORE_BASE + 0x2000)
-#define CONTROL_PADCONF_CORE (OMAP44XX_L4_CORE_BASE + 0x100000)
-#define CONTROL_PADCONF_WKUP (OMAP44XX_L4_CORE_BASE + 0x31E000)
-
-/* LPDDR2 IO regs */
-#define LPDDR2_IO_REGS_BASE 0x4A100638
-
/* CONTROL_ID_CODE */
#define CONTROL_ID_CODE 0x4A002204
@@ -79,15 +71,9 @@
/* Watchdog Timer2 - MPU watchdog */
#define WDT2_BASE (OMAP44XX_L4_WKUP_BASE + 0x14000)
-/* 32KTIMER */
-#define SYNC_32KTIMER_BASE (OMAP44XX_L4_WKUP_BASE + 0x4000)
-
/* GPMC */
#define OMAP44XX_GPMC_BASE 0x50000000
-/* SYSTEM CONTROL MODULE */
-#define SYSCTRL_GENERAL_CORE_BASE 0x4A002000
-
/*
* Hardware Register Details
*/
@@ -143,4 +129,12 @@
#define NON_SECURE_SRAM_END 0x4030E000 /* Not inclusive */
/* base address for indirect vectors (internal boot mode) */
#define SRAM_ROM_VECT_BASE 0x4030D000
+
+/* ABB settings */
+#define OMAP_ABB_SETTLING_TIME 50
+#define OMAP_ABB_CLOCK_CYCLES 16
+
+/* ABB tranxdone mask */
+#define OMAP_ABB_MPU_TXDONE_MASK (0x1 << 7)
+
#endif
diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h
index 039a1f2..e413466 100644
--- a/arch/arm/include/asm/arch-omap4/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap4/sys_proto.h
@@ -22,7 +22,7 @@
#define _SYS_PROTO_H_
#include <asm/arch/omap.h>
-#include <asm/arch/clocks.h>
+#include <asm/arch/clock.h>
#include <asm/io.h>
#include <asm/omap_common.h>
#include <asm/arch/mux_omap4.h>
@@ -54,9 +54,11 @@
void sdram_init(void);
u32 omap_sdram_size(void);
u32 cortex_rev(void);
+void save_omap_boot_params(void);
void init_omap_revision(void);
void do_io_settings(void);
-void omap_vc_init(u16 speed_khz);
+void sri2c_init(void);
+void gpi2c_init(void);
int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data);
u32 warm_reset(void);
void force_emif_self_refresh(void);
diff --git a/arch/arm/include/asm/arch-omap5/clocks.h b/arch/arm/include/asm/arch-omap5/clock.h
similarity index 73%
rename from arch/arm/include/asm/arch-omap5/clocks.h
rename to arch/arm/include/asm/arch-omap5/clock.h
index 68afa76..4d2765d 100644
--- a/arch/arm/include/asm/arch-omap5/clocks.h
+++ b/arch/arm/include/asm/arch-omap5/clock.h
@@ -35,19 +35,6 @@
*/
#define LDELAY 1000000
-#define CM_CLKMODE_DPLL_CORE (OMAP54XX_L4_CORE_BASE + 0x4120)
-#define CM_CLKMODE_DPLL_PER (OMAP54XX_L4_CORE_BASE + 0x8140)
-#define CM_CLKMODE_DPLL_MPU (OMAP54XX_L4_CORE_BASE + 0x4160)
-#define CM_CLKSEL_CORE (OMAP54XX_L4_CORE_BASE + 0x4100)
-
-/* DPLL register offsets */
-#define CM_CLKMODE_DPLL 0
-#define CM_IDLEST_DPLL 0x4
-#define CM_AUTOIDLE_DPLL 0x8
-#define CM_CLKSEL_DPLL 0xC
-
-#define DPLL_CLKOUT_DIV_MASK 0x1F /* post-divider mask */
-
/* CM_DLL_CTRL */
#define CM_DLL_CTRL_OVERRIDE_SHIFT 0
#define CM_DLL_CTRL_OVERRIDE_MASK (1 << 0)
@@ -93,10 +80,8 @@
#define CM_CLKSEL_DCC_EN_SHIFT 22
#define CM_CLKSEL_DCC_EN_MASK (1 << 22)
-#define OMAP4_DPLL_MAX_N 127
-
/* CM_SYS_CLKSEL */
-#define CM_SYS_CLKSEL_SYS_CLKSEL_MASK 7
+#define CM_SYS_CLKSEL_SYS_CLKSEL_MASK 7
/* CM_CLKSEL_CORE */
#define CLKSEL_CORE_SHIFT 0
@@ -113,6 +98,12 @@
#define CM_ABE_PLL_REF_CLKSEL_CLKSEL_SYSCLK 0
#define CM_ABE_PLL_REF_CLKSEL_CLKSEL_32KCLK 1
+/* CM_CLKSEL_ABE_PLL_SYS */
+#define CM_CLKSEL_ABE_PLL_SYS_CLKSEL_SHIFT 0
+#define CM_CLKSEL_ABE_PLL_SYS_CLKSEL_MASK 1
+#define CM_ABE_PLL_SYS_CLKSEL_SYSCLK1 0
+#define CM_ABE_PLL_SYS_CLKSEL_SYSCLK2 1
+
/* CM_BYPCLK_DPLL_IVA */
#define CM_BYPCLK_DPLL_IVA_CLKSEL_SHIFT 0
#define CM_BYPCLK_DPLL_IVA_CLKSEL_MASK 3
@@ -195,9 +186,7 @@
#define RSTTIME1_MASK (0x3ff << 0)
/* Clock frequencies */
-#define OMAP_SYS_CLK_FREQ_38_4_MHZ 38400000
#define OMAP_SYS_CLK_IND_38_4_MHZ 6
-#define OMAP_32K_CLK_FREQ 32768
/* PRM_VC_VAL_BYPASS */
#define PRM_VC_I2C_CHANNEL_FREQ_KHZ 400
@@ -229,9 +218,54 @@
#define VDD_MPU_ES2_LOW 880
#define VDD_MM_ES2_LOW 880
+/* TPS659038 Voltage settings in mv for OPP_NOMINAL */
+#define VDD_MPU_DRA752 1090
+#define VDD_EVE_DRA752 1060
+#define VDD_GPU_DRA752 1060
+#define VDD_CORE_DRA752 1030
+#define VDD_IVA_DRA752 1060
+
+/* Efuse register offsets for DRA7xx platform */
+#define DRA752_EFUSE_BASE 0x4A002000
+#define DRA752_EFUSE_REGBITS 16
+/* STD_FUSE_OPP_VMIN_IVA_2 */
+#define STD_FUSE_OPP_VMIN_IVA_NOM (DRA752_EFUSE_BASE + 0x05CC)
+/* STD_FUSE_OPP_VMIN_IVA_3 */
+#define STD_FUSE_OPP_VMIN_IVA_OD (DRA752_EFUSE_BASE + 0x05D0)
+/* STD_FUSE_OPP_VMIN_IVA_4 */
+#define STD_FUSE_OPP_VMIN_IVA_HIGH (DRA752_EFUSE_BASE + 0x05D4)
+/* STD_FUSE_OPP_VMIN_DSPEVE_2 */
+#define STD_FUSE_OPP_VMIN_DSPEVE_NOM (DRA752_EFUSE_BASE + 0x05E0)
+/* STD_FUSE_OPP_VMIN_DSPEVE_3 */
+#define STD_FUSE_OPP_VMIN_DSPEVE_OD (DRA752_EFUSE_BASE + 0x05E4)
+/* STD_FUSE_OPP_VMIN_DSPEVE_4 */
+#define STD_FUSE_OPP_VMIN_DSPEVE_HIGH (DRA752_EFUSE_BASE + 0x05E8)
+/* STD_FUSE_OPP_VMIN_CORE_2 */
+#define STD_FUSE_OPP_VMIN_CORE_NOM (DRA752_EFUSE_BASE + 0x05F4)
+/* STD_FUSE_OPP_VMIN_GPU_2 */
+#define STD_FUSE_OPP_VMIN_GPU_NOM (DRA752_EFUSE_BASE + 0x1B08)
+/* STD_FUSE_OPP_VMIN_GPU_3 */
+#define STD_FUSE_OPP_VMIN_GPU_OD (DRA752_EFUSE_BASE + 0x1B0C)
+/* STD_FUSE_OPP_VMIN_GPU_4 */
+#define STD_FUSE_OPP_VMIN_GPU_HIGH (DRA752_EFUSE_BASE + 0x1B10)
+/* STD_FUSE_OPP_VMIN_MPU_2 */
+#define STD_FUSE_OPP_VMIN_MPU_NOM (DRA752_EFUSE_BASE + 0x1B20)
+/* STD_FUSE_OPP_VMIN_MPU_3 */
+#define STD_FUSE_OPP_VMIN_MPU_OD (DRA752_EFUSE_BASE + 0x1B24)
+/* STD_FUSE_OPP_VMIN_MPU_4 */
+#define STD_FUSE_OPP_VMIN_MPU_HIGH (DRA752_EFUSE_BASE + 0x1B28)
+
/* Standard offset is 0.5v expressed in uv */
#define PALMAS_SMPS_BASE_VOLT_UV 500000
+/* TPS659038 */
+#define TPS659038_I2C_SLAVE_ADDR 0x58
+#define TPS659038_REG_ADDR_SMPS12_MPU 0x23
+#define TPS659038_REG_ADDR_SMPS45_EVE 0x2B
+#define TPS659038_REG_ADDR_SMPS6_GPU 0x2F
+#define TPS659038_REG_ADDR_SMPS7_CORE 0x33
+#define TPS659038_REG_ADDR_SMPS8_IVA 0x37
+
/* TPS */
#define TPS62361_I2C_SLAVE_ADDR 0x60
#define TPS62361_REG_ADDR_SET0 0x0
@@ -261,4 +295,25 @@
* into microsec and passing the value.
*/
#define CONFIG_DEFAULT_OMAP_RESET_TIME_MAX_USEC 31219
+
+#ifdef CONFIG_DRA7XX
+#define V_OSCK 20000000 /* Clock output from T2 */
+#else
+#define V_OSCK 19200000 /* Clock output from T2 */
+#endif
+
+#define V_SCLK V_OSCK
+
+/* AUXCLKx reg fields */
+#define AUXCLK_ENABLE_MASK (1 << 8)
+#define AUXCLK_SRCSELECT_SHIFT 1
+#define AUXCLK_SRCSELECT_MASK (3 << 1)
+#define AUXCLK_CLKDIV_SHIFT 16
+#define AUXCLK_CLKDIV_MASK (0xF << 16)
+
+#define AUXCLK_SRCSELECT_SYS_CLK 0
+#define AUXCLK_SRCSELECT_CORE_DPLL 1
+#define AUXCLK_SRCSELECT_PER_DPLL 2
+#define AUXCLK_SRCSELECT_ALTERNATE 3
+
#endif /* _CLOCKS_OMAP5_H_ */
diff --git a/arch/arm/include/asm/arch-omap5/cpu.h b/arch/arm/include/asm/arch-omap5/cpu.h
index 044ab55..4753f46 100644
--- a/arch/arm/include/asm/arch-omap5/cpu.h
+++ b/arch/arm/include/asm/arch-omap5/cpu.h
@@ -119,18 +119,6 @@
#define WD_UNLOCK1 0xAAAA
#define WD_UNLOCK2 0x5555
-#define SYSCLKDIV_1 (0x1 << 6)
-#define SYSCLKDIV_2 (0x1 << 7)
-
-#define CLKSEL_GPT1 (0x1 << 0)
-
-#define EN_GPT1 (0x1 << 0)
-#define EN_32KSYNC (0x1 << 2)
-
-#define ST_WDT2 (0x1 << 5)
-
-#define RESETDONE (0x1 << 0)
-
#define TCLR_ST (0x1 << 0)
#define TCLR_AR (0x1 << 1)
#define TCLR_PRE (0x1 << 5)
diff --git a/arch/arm/include/asm/arch-omap5/gpio.h b/arch/arm/include/asm/arch-omap5/gpio.h
index c14dff0..7c82f90 100644
--- a/arch/arm/include/asm/arch-omap5/gpio.h
+++ b/arch/arm/include/asm/arch-omap5/gpio.h
@@ -40,11 +40,15 @@
#include <asm/omap_gpio.h>
+#define OMAP_MAX_GPIO 256
+
#define OMAP54XX_GPIO1_BASE 0x4Ae10000
#define OMAP54XX_GPIO2_BASE 0x48055000
#define OMAP54XX_GPIO3_BASE 0x48057000
#define OMAP54XX_GPIO4_BASE 0x48059000
#define OMAP54XX_GPIO5_BASE 0x4805B000
#define OMAP54XX_GPIO6_BASE 0x4805D000
+#define OMAP54XX_GPIO7_BASE 0x48051000
+#define OMAP54XX_GPIO8_BASE 0x48053000
#endif /* _GPIO_OMAP5_H */
diff --git a/arch/arm/include/asm/arch-omap5/mux_dra7xx.h b/arch/arm/include/asm/arch-omap5/mux_dra7xx.h
index 55e9de6..5f2b0f9 100644
--- a/arch/arm/include/asm/arch-omap5/mux_dra7xx.h
+++ b/arch/arm/include/asm/arch-omap5/mux_dra7xx.h
@@ -28,11 +28,14 @@
#include <asm/types.h>
+#define FSC (1 << 19)
+#define SSC (0 << 19)
+
#define IEN (1 << 18)
#define IDIS (0 << 18)
-#define PTU (3 << 16)
-#define PTD (1 << 16)
+#define PTU (1 << 17)
+#define PTD (0 << 17)
#define PEN (1 << 16)
#define PDIS (0 << 16)
diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h
index 4f43a90..817c1ff 100644
--- a/arch/arm/include/asm/arch-omap5/omap.h
+++ b/arch/arm/include/asm/arch-omap5/omap.h
@@ -44,16 +44,15 @@
#define DRAM_ADDR_SPACE_START OMAP54XX_DRAM_ADDR_SPACE_START
#define DRAM_ADDR_SPACE_END OMAP54XX_DRAM_ADDR_SPACE_END
-/* CONTROL */
-#define CTRL_BASE (OMAP54XX_L4_CORE_BASE + 0x2000)
-#define CONTROL_PADCONF_CORE (CTRL_BASE + 0x0800)
-#define CONTROL_PADCONF_WKUP (OMAP54XX_L4_WKUP_BASE + 0xc800)
+/* CONTROL ID CODE */
+#define CONTROL_CORE_ID_CODE 0x4A002204
+#define CONTROL_WKUP_ID_CODE 0x4AE0C204
-/* LPDDR2 IO regs. To be verified */
-#define LPDDR2_IO_REGS_BASE 0x4A100638
-
-/* CONTROL_ID_CODE */
-#define CONTROL_ID_CODE (CTRL_BASE + 0x204)
+#ifdef CONFIG_DRA7XX
+#define CONTROL_ID_CODE CONTROL_WKUP_ID_CODE
+#else
+#define CONTROL_ID_CODE CONTROL_CORE_ID_CODE
+#endif
/* To be verified */
#define OMAP5430_CONTROL_ID_CODE_ES1_0 0x0B94202F
@@ -62,11 +61,6 @@
#define OMAP5432_CONTROL_ID_CODE_ES2_0 0x1B99802F
#define DRA752_CONTROL_ID_CODE_ES1_0 0x0B99002F
-/* STD_FUSE_PROD_ID_1 */
-#define STD_FUSE_PROD_ID_1 (CTRL_BASE + 0x218)
-#define PROD_ID_1_SILICON_TYPE_SHIFT 16
-#define PROD_ID_1_SILICON_TYPE_MASK (3 << 16)
-
/* UART */
#define UART1_BASE (OMAP54XX_L4_PER_BASE + 0x6a000)
#define UART2_BASE (OMAP54XX_L4_PER_BASE + 0x6c000)
@@ -80,15 +74,9 @@
/* Watchdog Timer2 - MPU watchdog */
#define WDT2_BASE (OMAP54XX_L4_WKUP_BASE + 0x14000)
-/* 32KTIMER */
-#define SYNC_32KTIMER_BASE (OMAP54XX_L4_WKUP_BASE + 0x4000)
-
/* GPMC */
#define OMAP54XX_GPMC_BASE 0x50000000
-/* SYSTEM CONTROL MODULE */
-#define SYSCTRL_GENERAL_CORE_BASE 0x4A002000
-
/*
* Hardware Register Details
*/
@@ -118,9 +106,9 @@
/* CONTROL_EFUSE_2 */
#define CONTROL_EFUSE_2_NMOS_PMOS_PTV_CODE_1 0x00ffc000
+#define SDCARD_BIAS_PWRDNZ (1 << 27)
#define SDCARD_PWRDNZ (1 << 26)
#define SDCARD_BIAS_HIZ_MODE (1 << 25)
-#define SDCARD_BIAS_PWRDNZ (1 << 22)
#define SDCARD_PBIASLITE_VMODE (1 << 21)
#ifndef __ASSEMBLY__
@@ -181,26 +169,17 @@
#define EFUSE_4 0x45145100
#endif /* __ASSEMBLY__ */
-/*
- * Non-secure SRAM Addresses
- * Non-secure RAM starts at 0x40300000 for GP devices. But we keep SRAM_BASE
- * at 0x40304000(EMU base) so that our code works for both EMU and GP
- */
+#ifdef CONFIG_DRA7XX
+#define NON_SECURE_SRAM_START 0x40300000
+#define NON_SECURE_SRAM_END 0x40380000 /* Not inclusive */
+#else
#define NON_SECURE_SRAM_START 0x40300000
#define NON_SECURE_SRAM_END 0x40320000 /* Not inclusive */
+#endif
+
/* base address for indirect vectors (internal boot mode) */
#define SRAM_ROM_VECT_BASE 0x4031F000
-/* Silicon revisions */
-#define OMAP4430_SILICON_ID_INVALID 0xFFFFFFFF
-#define OMAP4430_ES1_0 0x44300100
-#define OMAP4430_ES2_0 0x44300200
-#define OMAP4430_ES2_1 0x44300210
-#define OMAP4430_ES2_2 0x44300220
-#define OMAP4430_ES2_3 0x44300230
-#define OMAP4460_ES1_0 0x44600100
-#define OMAP4460_ES1_1 0x44600110
-
/* CONTROL_SRCOMP_XXX_SIDE */
#define OVERRIDE_XS_SHIFT 30
#define OVERRIDE_XS_MASK (1 << 30)
@@ -215,6 +194,19 @@
#define SRCODE_OVERRIDE_SEL_XS_SHIFT 0
#define SRCODE_OVERRIDE_SEL_XS_MASK (1 << 0)
+/* ABB settings */
+#define OMAP_ABB_SETTLING_TIME 50
+#define OMAP_ABB_CLOCK_CYCLES 16
+
+/* ABB tranxdone mask */
+#define OMAP_ABB_MPU_TXDONE_MASK (0x1 << 7)
+
+/* ABB efuse masks */
+#define OMAP5_ABB_FUSE_VSET_MASK (0x1F << 24)
+#define OMAP5_ABB_FUSE_ENABLE_MASK (0x1 << 29)
+#define OMAP5_ABB_LDOVBBMPU_MUX_CTRL_MASK (0x1 << 10)
+#define OMAP5_ABB_LDOVBBMPU_VSET_OUT_MASK (0x1f << 0)
+
#ifndef __ASSEMBLY__
struct srcomp_params {
s8 divide_factor;
@@ -229,6 +221,7 @@
u32 ctrl_ddrio_1;
u32 ctrl_ddrio_2;
u32 ctrl_emif_sdram_config_ext;
+ u32 ctrl_ddr_ctrl_ext_0;
};
#endif /* __ASSEMBLY__ */
#endif
diff --git a/arch/arm/include/asm/arch-omap5/sys_proto.h b/arch/arm/include/asm/arch-omap5/sys_proto.h
index b79161d..0bb59d8 100644
--- a/arch/arm/include/asm/arch-omap5/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap5/sys_proto.h
@@ -23,9 +23,9 @@
#include <asm/arch/omap.h>
#include <asm/io.h>
-#include <asm/arch/clocks.h>
+#include <asm/arch/clock.h>
#include <asm/omap_common.h>
-#include <asm/arch/clocks.h>
+#include <asm/arch/clock.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -58,9 +58,11 @@
void sdram_init(void);
u32 omap_sdram_size(void);
u32 cortex_rev(void);
+void save_omap_boot_params(void);
void init_omap_revision(void);
void do_io_settings(void);
-void omap_vc_init(u16 speed_khz);
+void sri2c_init(void);
+void gpi2c_init(void);
int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data);
u32 warm_reset(void);
void force_emif_self_refresh(void);
diff --git a/arch/arm/include/asm/arch-tegra/clk_rst.h b/arch/arm/include/asm/arch-tegra/clk_rst.h
index c754ec7..9b8de9c 100644
--- a/arch/arm/include/asm/arch-tegra/clk_rst.h
+++ b/arch/arm/include/asm/arch-tegra/clk_rst.h
@@ -225,6 +225,16 @@
IN_408_OUT_9_6_DIVISOR = 83,
};
+/* CLK_RST_CONTROLLER_UTMIP_PLL_CFG1_0 */
+#define PLLU_POWERDOWN (1 << 16)
+#define PLL_ENABLE_POWERDOWN (1 << 14)
+#define PLL_ACTIVE_POWERDOWN (1 << 12)
+
+/* CLK_RST_CONTROLLER_UTMIP_PLL_CFG2_0 */
+#define UTMIP_FORCE_PD_SAMP_C_POWERDOWN (1 << 4)
+#define UTMIP_FORCE_PD_SAMP_B_POWERDOWN (1 << 2)
+#define UTMIP_FORCE_PD_SAMP_A_POWERDOWN (1 << 0)
+
/* CLK_RST_CONTROLLER_OSC_CTRL_0 */
#define OSC_XOBP_SHIFT 1
#define OSC_XOBP_MASK (1U << OSC_XOBP_SHIFT)
diff --git a/arch/arm/include/asm/arch-tegra/tegra.h b/arch/arm/include/asm/arch-tegra/tegra.h
index 3e642e9..5fe4838d 100644
--- a/arch/arm/include/asm/arch-tegra/tegra.h
+++ b/arch/arm/include/asm/arch-tegra/tegra.h
@@ -72,6 +72,7 @@
/* These are the available SKUs (product types) for Tegra */
enum {
+ SKU_ID_T20_7 = 0x7,
SKU_ID_T20 = 0x8,
SKU_ID_T25SE = 0x14,
SKU_ID_AP25 = 0x17,
@@ -81,6 +82,7 @@
SKU_ID_T33 = 0x80,
SKU_ID_T30 = 0x81, /* Cardhu value */
SKU_ID_T114_ENG = 0x00, /* Dalmore value, unfused */
+ SKU_ID_T114_1 = 0x01,
};
/*
diff --git a/arch/arm/include/asm/arch-tegra/usb.h b/arch/arm/include/asm/arch-tegra/usb.h
index ef6c089..cefe0d2 100644
--- a/arch/arm/include/asm/arch-tegra/usb.h
+++ b/arch/arm/include/asm/arch-tegra/usb.h
@@ -1,5 +1,6 @@
/*
* Copyright (c) 2011 The Chromium OS Authors.
+ * Copyright (c) 2013 NVIDIA Corporation
* See file CREDITS for list of people who contributed to this
* project.
*
@@ -22,120 +23,6 @@
#ifndef _TEGRA_USB_H_
#define _TEGRA_USB_H_
-
-/* USB Controller (USBx_CONTROLLER_) regs */
-struct usb_ctlr {
- /* 0x000 */
- uint id;
- uint reserved0;
- uint host;
- uint device;
-
- /* 0x010 */
- uint txbuf;
- uint rxbuf;
- uint reserved1[2];
-
- /* 0x020 */
- uint reserved2[56];
-
- /* 0x100 */
- u16 cap_length;
- u16 hci_version;
- uint hcs_params;
- uint hcc_params;
- uint reserved3[5];
-
- /* 0x120 */
- uint dci_version;
- uint dcc_params;
- uint reserved4[6];
-
- /* 0x140 */
- uint usb_cmd;
- uint usb_sts;
- uint usb_intr;
- uint frindex;
-
- /* 0x150 */
- uint reserved5;
- uint periodic_list_base;
- uint async_list_addr;
- uint async_tt_sts;
-
- /* 0x160 */
- uint burst_size;
- uint tx_fill_tuning;
- uint reserved6; /* is this port_sc1 on some controllers? */
- uint icusb_ctrl;
-
- /* 0x170 */
- uint ulpi_viewport;
- uint reserved7;
- uint endpt_nak;
- uint endpt_nak_enable;
-
- /* 0x180 */
- uint reserved;
- uint port_sc1;
- uint reserved8[6];
-
- /* 0x1a0 */
- uint reserved9;
- uint otgsc;
- uint usb_mode;
- uint endpt_setup_stat;
-
- /* 0x1b0 */
- uint reserved10[20];
-
- /* 0x200 */
- uint reserved11[0x80];
-
- /* 0x400 */
- uint susp_ctrl;
- uint phy_vbus_sensors;
- uint phy_vbus_wakeup_id;
- uint phy_alt_vbus_sys;
-
- /* 0x410 */
- uint usb1_legacy_ctrl;
- uint reserved12[4];
-
- /* 0x424 */
- uint ulpi_timing_ctrl_0;
- uint ulpi_timing_ctrl_1;
- uint reserved13[53];
-
- /* 0x500 */
- uint reserved14[64 * 3];
-
- /* 0x800 */
- uint utmip_pll_cfg0;
- uint utmip_pll_cfg1;
- uint utmip_xcvr_cfg0;
- uint utmip_bias_cfg0;
-
- /* 0x810 */
- uint utmip_hsrx_cfg0;
- uint utmip_hsrx_cfg1;
- uint utmip_fslsrx_cfg0;
- uint utmip_fslsrx_cfg1;
-
- /* 0x820 */
- uint utmip_tx_cfg0;
- uint utmip_misc_cfg0;
- uint utmip_misc_cfg1;
- uint utmip_debounce_cfg0;
-
- /* 0x830 */
- uint utmip_bat_chrg_cfg0;
- uint utmip_spare_cfg0;
- uint utmip_xcvr_cfg1;
- uint utmip_bias_cfg1;
-};
-
-
/* USB1_LEGACY_CTRL */
#define USB1_NO_LEGACY_MODE 1
@@ -146,25 +33,18 @@
#define VBUS_SENSE_CTL_AB_SESS_VLD 2
#define VBUS_SENSE_CTL_A_SESS_VLD 3
-/* USB2_IF_ULPI_TIMING_CTRL_0 */
-#define ULPI_OUTPUT_PINMUX_BYP (1 << 10)
-#define ULPI_CLKOUT_PINMUX_BYP (1 << 11)
-
-/* USB2_IF_ULPI_TIMING_CTRL_1 */
-#define ULPI_DATA_TRIMMER_LOAD (1 << 0)
-#define ULPI_DATA_TRIMMER_SEL(x) (((x) & 0x7) << 1)
-#define ULPI_STPDIRNXT_TRIMMER_LOAD (1 << 16)
-#define ULPI_STPDIRNXT_TRIMMER_SEL(x) (((x) & 0x7) << 17)
-#define ULPI_DIR_TRIMMER_LOAD (1 << 24)
-#define ULPI_DIR_TRIMMER_SEL(x) (((x) & 0x7) << 25)
-
/* USBx_IF_USB_SUSP_CTRL_0 */
-#define ULPI_PHY_ENB (1 << 13)
#define UTMIP_PHY_ENB (1 << 12)
#define UTMIP_RESET (1 << 11)
#define USB_PHY_CLK_VALID (1 << 7)
#define USB_SUSP_CLR (1 << 5)
+/* USB2_IF_USB_SUSP_CTRL_0 */
+#define ULPI_PHY_ENB (1 << 13)
+
+/* USBx_UTMIP_MISC_CFG0 */
+#define UTMIP_SUSPEND_EXIT_ON_EDGE (1 << 22)
+
/* USBx_UTMIP_MISC_CFG1 */
#define UTMIP_PLLU_STABLE_COUNT_SHIFT 6
#define UTMIP_PLLU_STABLE_COUNT_MASK \
@@ -177,15 +57,28 @@
/* USBx_UTMIP_PLL_CFG1_0 */
#define UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT 27
#define UTMIP_PLLU_ENABLE_DLY_COUNT_MASK \
- (0xf << UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT)
+ (0x1f << UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT)
#define UTMIP_XTAL_FREQ_COUNT_SHIFT 0
#define UTMIP_XTAL_FREQ_COUNT_MASK 0xfff
+/* USBx_UTMIP_BIAS_CFG0_0 */
+#define UTMIP_HSDISCON_LEVEL_MSB (1 << 24)
+#define UTMIP_OTGPD (1 << 11)
+#define UTMIP_BIASPD (1 << 10)
+#define UTMIP_HSDISCON_LEVEL_SHIFT 2
+#define UTMIP_HSDISCON_LEVEL_MASK \
+ (0x3 << UTMIP_HSDISCON_LEVEL_SHIFT)
+#define UTMIP_HSSQUELCH_LEVEL_SHIFT 0
+#define UTMIP_HSSQUELCH_LEVEL_MASK \
+ (0x3 << UTMIP_HSSQUELCH_LEVEL_SHIFT)
+
/* USBx_UTMIP_BIAS_CFG1_0 */
+#define UTMIP_FORCE_PDTRK_POWERDOWN 1
#define UTMIP_BIAS_PDTRK_COUNT_SHIFT 3
#define UTMIP_BIAS_PDTRK_COUNT_MASK \
(0x1f << UTMIP_BIAS_PDTRK_COUNT_SHIFT)
+/* USBx_UTMIP_DEBOUNCE_CFG0_0 */
#define UTMIP_DEBOUNCE_CFG0_SHIFT 0
#define UTMIP_DEBOUNCE_CFG0_MASK 0xffff
@@ -195,9 +88,6 @@
/* USBx_UTMIP_BAT_CHRG_CFG0_0 */
#define UTMIP_PD_CHRG 1
-/* USBx_UTMIP_XCVR_CFG0_0 */
-#define UTMIP_XCVR_LSBIAS_SE (1 << 21)
-
/* USBx_UTMIP_SPARE_CFG0_0 */
#define FUSE_SETUP_SEL (1 << 3)
@@ -208,23 +98,26 @@
#define UTMIP_ELASTIC_LIMIT_MASK \
(0x1f << UTMIP_ELASTIC_LIMIT_SHIFT)
-/* USBx_UTMIP_HSRX_CFG0_1 */
+/* USBx_UTMIP_HSRX_CFG1_0 */
#define UTMIP_HS_SYNC_START_DLY_SHIFT 1
#define UTMIP_HS_SYNC_START_DLY_MASK \
- (0xf << UTMIP_HS_SYNC_START_DLY_SHIFT)
+ (0x1f << UTMIP_HS_SYNC_START_DLY_SHIFT)
/* USBx_CONTROLLER_2_USB2D_ICUSB_CTRL_0 */
#define IC_ENB1 (1 << 3)
-/* SB2_CONTROLLER_2_USB2D_PORTSC1_0 */
-#define PTS_SHIFT 30
-#define PTS_MASK (3U << PTS_SHIFT)
-#define PTS_UTMI 0
-#define PTS_RESERVED 1
-#define PTS_ULPI 2
-#define PTS_ICUSB_SER 3
+/* PORTSC1, USB1, defined for Tegra20 */
+#define PTS1_SHIFT 31
+#define PTS1_MASK (1 << PTS1_SHIFT)
+#define STS1 (1 << 30)
-#define STS (1 << 29)
+#define PTS_UTMI 0
+#define PTS_RESERVED 1
+#define PTS_ULPI 2
+#define PTS_ICUSB_SER 3
+#define PTS_HSIC 4
+
+/* SB2_CONTROLLER_2_USB2D_PORTSC1_0 */
#define WKOC (1 << 22)
#define WKDS (1 << 21)
#define WKCN (1 << 20)
@@ -233,8 +126,19 @@
#define UTMIP_FORCE_PD_POWERDOWN (1 << 14)
#define UTMIP_FORCE_PD2_POWERDOWN (1 << 16)
#define UTMIP_FORCE_PDZI_POWERDOWN (1 << 18)
+#define UTMIP_XCVR_LSBIAS_SE (1 << 21)
+#define UTMIP_XCVR_HSSLEW_MSB_SHIFT 25
+#define UTMIP_XCVR_HSSLEW_MSB_MASK \
+ (0x7f << UTMIP_XCVR_HSSLEW_MSB_SHIFT)
+#define UTMIP_XCVR_SETUP_MSB_SHIFT 22
+#define UTMIP_XCVR_SETUP_MSB_MASK (0x7 << UTMIP_XCVR_SETUP_MSB_SHIFT)
+#define UTMIP_XCVR_SETUP_SHIFT 0
+#define UTMIP_XCVR_SETUP_MASK (0xf << UTMIP_XCVR_SETUP_SHIFT)
/* USBx_UTMIP_XCVR_CFG1_0 */
+#define UTMIP_XCVR_TERM_RANGE_ADJ_SHIFT 18
+#define UTMIP_XCVR_TERM_RANGE_ADJ_MASK \
+ (0xf << UTMIP_XCVR_TERM_RANGE_ADJ_SHIFT)
#define UTMIP_FORCE_PDDISC_POWERDOWN (1 << 0)
#define UTMIP_FORCE_PDCHRP_POWERDOWN (1 << 2)
#define UTMIP_FORCE_PDDR_POWERDOWN (1 << 4)
diff --git a/arch/arm/include/asm/arch-tegra114/usb.h b/arch/arm/include/asm/arch-tegra114/usb.h
new file mode 100644
index 0000000..d46048c
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra114/usb.h
@@ -0,0 +1,156 @@
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * Copyright (c) 2013 NVIDIA Corporation
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _TEGRA114_USB_H_
+#define _TEGRA114_USB_H_
+
+/* USB Controller (USBx_CONTROLLER_) regs */
+struct usb_ctlr {
+ /* 0x000 */
+ uint id;
+ uint reserved0;
+ uint host;
+ uint device;
+
+ /* 0x010 */
+ uint txbuf;
+ uint rxbuf;
+ uint reserved1[2];
+
+ /* 0x020 */
+ uint reserved2[56];
+
+ /* 0x100 */
+ u16 cap_length;
+ u16 hci_version;
+ uint hcs_params;
+ uint hcc_params;
+ uint reserved3[5];
+
+ /* 0x120 */
+ uint dci_version;
+ uint dcc_params;
+ uint reserved4[2];
+
+ /* 0x130 */
+ uint usb_cmd;
+ uint usb_sts;
+ uint usb_intr;
+ uint frindex;
+
+ /* 0x140 */
+ uint reserved5;
+ uint periodic_list_base;
+ uint async_list_addr;
+ uint reserved5_1;
+
+ /* 0x150 */
+ uint burst_size;
+ uint tx_fill_tuning;
+ uint reserved6;
+ uint icusb_ctrl;
+
+ /* 0x160 */
+ uint ulpi_viewport;
+ uint reserved7[3];
+
+ /* 0x170 */
+ uint reserved;
+ uint port_sc1;
+ uint reserved8[6];
+
+ /* 0x190 */
+ uint reserved9[8];
+
+ /* 0x1b0 */
+ uint reserved10;
+ uint hostpc1_devlc;
+ uint reserved10_1[2];
+
+ /* 0x1c0 */
+ uint reserved10_2[4];
+
+ /* 0x1d0 */
+ uint reserved10_3[4];
+
+ /* 0x1e0 */
+ uint reserved10_4[4];
+
+ /* 0x1f0 */
+ uint reserved10_5;
+ uint otgsc;
+ uint usb_mode;
+ uint reserved10_6;
+
+ /* 0x200 */
+ uint endpt_nak;
+ uint endpt_nak_enable;
+ uint endpt_setup_stat;
+ uint reserved11_1[0x7D];
+
+ /* 0x400 */
+ uint susp_ctrl;
+ uint phy_vbus_sensors;
+ uint phy_vbus_wakeup_id;
+ uint phy_alt_vbus_sys;
+
+ /* 0x410 */
+ uint usb1_legacy_ctrl;
+ uint reserved12[3];
+
+ /* 0x420 */
+ uint reserved13[56];
+
+ /* 0x500 */
+ uint reserved14[64 * 3];
+
+ /* 0x800 */
+ uint utmip_pll_cfg0;
+ uint utmip_pll_cfg1;
+ uint utmip_xcvr_cfg0;
+ uint utmip_bias_cfg0;
+
+ /* 0x810 */
+ uint utmip_hsrx_cfg0;
+ uint utmip_hsrx_cfg1;
+ uint utmip_fslsrx_cfg0;
+ uint utmip_fslsrx_cfg1;
+
+ /* 0x820 */
+ uint utmip_tx_cfg0;
+ uint utmip_misc_cfg0;
+ uint utmip_misc_cfg1;
+ uint utmip_debounce_cfg0;
+
+ /* 0x830 */
+ uint utmip_bat_chrg_cfg0;
+ uint utmip_spare_cfg0;
+ uint utmip_xcvr_cfg1;
+ uint utmip_bias_cfg1;
+};
+
+/* USB2D_HOSTPC1_DEVLC_0 */
+#define PTS_SHIFT 29
+#define PTS_MASK (0x7U << PTS_SHIFT)
+
+#define STS (1 << 28)
+#endif /* _TEGRA114_USB_H_ */
diff --git a/arch/arm/include/asm/arch-tegra20/usb.h b/arch/arm/include/asm/arch-tegra20/usb.h
new file mode 100644
index 0000000..3d94cc7
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra20/usb.h
@@ -0,0 +1,155 @@
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * Copyright (c) 2013 NVIDIA Corporation
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _TEGRA20_USB_H_
+#define _TEGRA20_USB_H_
+
+/* USB Controller (USBx_CONTROLLER_) regs */
+struct usb_ctlr {
+ /* 0x000 */
+ uint id;
+ uint reserved0;
+ uint host;
+ uint device;
+
+ /* 0x010 */
+ uint txbuf;
+ uint rxbuf;
+ uint reserved1[2];
+
+ /* 0x020 */
+ uint reserved2[56];
+
+ /* 0x100 */
+ u16 cap_length;
+ u16 hci_version;
+ uint hcs_params;
+ uint hcc_params;
+ uint reserved3[5];
+
+ /* 0x120 */
+ uint dci_version;
+ uint dcc_params;
+ uint reserved4[6];
+
+ /* 0x140 */
+ uint usb_cmd;
+ uint usb_sts;
+ uint usb_intr;
+ uint frindex;
+
+ /* 0x150 */
+ uint reserved5;
+ uint periodic_list_base;
+ uint async_list_addr;
+ uint async_tt_sts;
+
+ /* 0x160 */
+ uint burst_size;
+ uint tx_fill_tuning;
+ uint reserved6; /* is this port_sc1 on some controllers? */
+ uint icusb_ctrl;
+
+ /* 0x170 */
+ uint ulpi_viewport;
+ uint reserved7;
+ uint endpt_nak;
+ uint endpt_nak_enable;
+
+ /* 0x180 */
+ uint reserved;
+ uint port_sc1;
+ uint reserved8[6];
+
+ /* 0x1a0 */
+ uint reserved9;
+ uint otgsc;
+ uint usb_mode;
+ uint endpt_setup_stat;
+
+ /* 0x1b0 */
+ uint reserved10[20];
+
+ /* 0x200 */
+ uint reserved11[0x80];
+
+ /* 0x400 */
+ uint susp_ctrl;
+ uint phy_vbus_sensors;
+ uint phy_vbus_wakeup_id;
+ uint phy_alt_vbus_sys;
+
+ /* 0x410 */
+ uint usb1_legacy_ctrl;
+ uint reserved12[4];
+
+ /* 0x424 */
+ uint ulpi_timing_ctrl_0;
+ uint ulpi_timing_ctrl_1;
+ uint reserved13[53];
+
+ /* 0x500 */
+ uint reserved14[64 * 3];
+
+ /* 0x800 */
+ uint utmip_pll_cfg0;
+ uint utmip_pll_cfg1;
+ uint utmip_xcvr_cfg0;
+ uint utmip_bias_cfg0;
+
+ /* 0x810 */
+ uint utmip_hsrx_cfg0;
+ uint utmip_hsrx_cfg1;
+ uint utmip_fslsrx_cfg0;
+ uint utmip_fslsrx_cfg1;
+
+ /* 0x820 */
+ uint utmip_tx_cfg0;
+ uint utmip_misc_cfg0;
+ uint utmip_misc_cfg1;
+ uint utmip_debounce_cfg0;
+
+ /* 0x830 */
+ uint utmip_bat_chrg_cfg0;
+ uint utmip_spare_cfg0;
+ uint utmip_xcvr_cfg1;
+ uint utmip_bias_cfg1;
+};
+
+/* USB2_IF_ULPI_TIMING_CTRL_0 */
+#define ULPI_OUTPUT_PINMUX_BYP (1 << 10)
+#define ULPI_CLKOUT_PINMUX_BYP (1 << 11)
+
+/* USB2_IF_ULPI_TIMING_CTRL_1 */
+#define ULPI_DATA_TRIMMER_LOAD (1 << 0)
+#define ULPI_DATA_TRIMMER_SEL(x) (((x) & 0x7) << 1)
+#define ULPI_STPDIRNXT_TRIMMER_LOAD (1 << 16)
+#define ULPI_STPDIRNXT_TRIMMER_SEL(x) (((x) & 0x7) << 17)
+#define ULPI_DIR_TRIMMER_LOAD (1 << 24)
+#define ULPI_DIR_TRIMMER_SEL(x) (((x) & 0x7) << 25)
+
+/* PORTSC, USB2, USB3 */
+#define PTS_SHIFT 30
+#define PTS_MASK (3U << PTS_SHIFT)
+
+#define STS (1 << 29)
+#endif /* _TEGRA20_USB_H_ */
diff --git a/arch/arm/include/asm/arch-tegra30/usb.h b/arch/arm/include/asm/arch-tegra30/usb.h
new file mode 100644
index 0000000..ab9b760
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra30/usb.h
@@ -0,0 +1,168 @@
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * Copyright (c) 2013 NVIDIA Corporation
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _TEGRA30_USB_H_
+#define _TEGRA30_USB_H_
+
+/* USB Controller (USBx_CONTROLLER_) regs */
+struct usb_ctlr {
+ /* 0x000 */
+ uint id;
+ uint reserved0;
+ uint host;
+ uint device;
+
+ /* 0x010 */
+ uint txbuf;
+ uint rxbuf;
+ uint reserved1[2];
+
+ /* 0x020 */
+ uint reserved2[56];
+
+ /* 0x100 */
+ u16 cap_length;
+ u16 hci_version;
+ uint hcs_params;
+ uint hcc_params;
+ uint reserved3[5];
+
+ /* 0x120 */
+ uint dci_version;
+ uint dcc_params;
+ uint reserved4[2];
+
+ /* 0x130 */
+ uint usb_cmd;
+ uint usb_sts;
+ uint usb_intr;
+ uint frindex;
+
+ /* 0x140 */
+ uint reserved5;
+ uint periodic_list_base;
+ uint async_list_addr;
+ uint reserved5_1;
+
+ /* 0x150 */
+ uint burst_size;
+ uint tx_fill_tuning;
+ uint reserved6;
+ uint icusb_ctrl;
+
+ /* 0x160 */
+ uint ulpi_viewport;
+ uint reserved7[3];
+
+ /* 0x170 */
+ uint reserved;
+ uint port_sc1;
+ uint reserved8[6];
+
+ /* 0x190 */
+ uint reserved9[8];
+
+ /* 0x1b0 */
+ uint reserved10;
+ uint hostpc1_devlc;
+ uint reserved10_1[2];
+
+ /* 0x1c0 */
+ uint reserved10_2[4];
+
+ /* 0x1d0 */
+ uint reserved10_3[4];
+
+ /* 0x1e0 */
+ uint reserved10_4[4];
+
+ /* 0x1f0 */
+ uint reserved10_5;
+ uint otgsc;
+ uint usb_mode;
+ uint reserved10_6;
+
+ /* 0x200 */
+ uint endpt_nak;
+ uint endpt_nak_enable;
+ uint endpt_setup_stat;
+ uint reserved11_1[0x7D];
+
+ /* 0x400 */
+ uint susp_ctrl;
+ uint phy_vbus_sensors;
+ uint phy_vbus_wakeup_id;
+ uint phy_alt_vbus_sys;
+
+ /* 0x410 */
+ uint usb1_legacy_ctrl;
+ uint reserved12[3];
+
+ /* 0x420 */
+ uint reserved13[56];
+
+ /* 0x500 */
+ uint reserved14[64 * 3];
+
+ /* 0x800 */
+ uint utmip_pll_cfg0;
+ uint utmip_pll_cfg1;
+ uint utmip_xcvr_cfg0;
+ uint utmip_bias_cfg0;
+
+ /* 0x810 */
+ uint utmip_hsrx_cfg0;
+ uint utmip_hsrx_cfg1;
+ uint utmip_fslsrx_cfg0;
+ uint utmip_fslsrx_cfg1;
+
+ /* 0x820 */
+ uint utmip_tx_cfg0;
+ uint utmip_misc_cfg0;
+ uint utmip_misc_cfg1;
+ uint utmip_debounce_cfg0;
+
+ /* 0x830 */
+ uint utmip_bat_chrg_cfg0;
+ uint utmip_spare_cfg0;
+ uint utmip_xcvr_cfg1;
+ uint utmip_bias_cfg1;
+};
+
+/* USB2_IF_ULPI_TIMING_CTRL_0 */
+#define ULPI_OUTPUT_PINMUX_BYP (1 << 10)
+#define ULPI_CLKOUT_PINMUX_BYP (1 << 11)
+
+/* USB2_IF_ULPI_TIMING_CTRL_1 */
+#define ULPI_DATA_TRIMMER_LOAD (1 << 0)
+#define ULPI_DATA_TRIMMER_SEL(x) (((x) & 0x7) << 1)
+#define ULPI_STPDIRNXT_TRIMMER_LOAD (1 << 16)
+#define ULPI_STPDIRNXT_TRIMMER_SEL(x) (((x) & 0x7) << 17)
+#define ULPI_DIR_TRIMMER_LOAD (1 << 24)
+#define ULPI_DIR_TRIMMER_SEL(x) (((x) & 0x7) << 25)
+
+/* USB2D_HOSTPC1_DEVLC_0 */
+#define PTS_SHIFT 29
+#define PTS_MASK (0x7U << PTS_SHIFT)
+
+#define STS (1 << 28)
+#endif /* _TEGRA30_USB_H_ */
diff --git a/arch/arm/include/asm/bootm.h b/arch/arm/include/asm/bootm.h
index db2ff94..2c4fa19 100644
--- a/arch/arm/include/asm/bootm.h
+++ b/arch/arm/include/asm/bootm.h
@@ -1,4 +1,7 @@
-/* Copyright (C) 2011
+/*
+ * Copyright (c) 2013, Google Inc.
+ *
+ * Copyright (C) 2011
* Corscience GmbH & Co. KG - Simon Schwarz <schwarz@corscience.de>
*
* This program is free software; you can redistribute it and/or modify
@@ -19,8 +22,55 @@
#ifndef ARM_BOOTM_H
#define ARM_BOOTM_H
-#ifdef CONFIG_USB_DEVICE
extern void udc_disconnect(void);
+
+#if defined(CONFIG_SETUP_MEMORY_TAGS) || \
+ defined(CONFIG_CMDLINE_TAG) || \
+ defined(CONFIG_INITRD_TAG) || \
+ defined(CONFIG_SERIAL_TAG) || \
+ defined(CONFIG_REVISION_TAG)
+# define BOOTM_ENABLE_TAGS 1
+#else
+# define BOOTM_ENABLE_TAGS 0
+#endif
+
+#ifdef CONFIG_SETUP_MEMORY_TAGS
+# define BOOTM_ENABLE_MEMORY_TAGS 1
+#else
+# define BOOTM_ENABLE_MEMORY_TAGS 0
+#endif
+
+#ifdef CONFIG_CMDLINE_TAG
+ #define BOOTM_ENABLE_CMDLINE_TAG 1
+#else
+ #define BOOTM_ENABLE_CMDLINE_TAG 0
+#endif
+
+#ifdef CONFIG_INITRD_TAG
+ #define BOOTM_ENABLE_INITRD_TAG 1
+#else
+ #define BOOTM_ENABLE_INITRD_TAG 0
+#endif
+
+#ifdef CONFIG_SERIAL_TAG
+ #define BOOTM_ENABLE_SERIAL_TAG 1
+void get_board_serial(struct tag_serialnr *serialnr);
+#else
+ #define BOOTM_ENABLE_SERIAL_TAG 0
+static inline void get_board_serial(struct tag_serialnr *serialnr)
+{
+}
+#endif
+
+#ifdef CONFIG_REVISION_TAG
+ #define BOOTM_ENABLE_REVISION_TAG 1
+u32 get_board_rev(void);
+#else
+ #define BOOTM_ENABLE_REVISION_TAG 0
+static inline u32 get_board_rev(void)
+{
+ return 0;
+}
#endif
#endif
diff --git a/arch/arm/include/asm/emif.h b/arch/arm/include/asm/emif.h
index 5f11d7b..1b94a99 100644
--- a/arch/arm/include/asm/emif.h
+++ b/arch/arm/include/asm/emif.h
@@ -581,7 +581,7 @@
(0xFF << EMIF_SYS_ADDR_SHIFT))
#define EMIF_EXT_PHY_CTRL_TIMING_REG 0x5
-#define EMIF_EXT_PHY_CTRL_CONST_REG 0x13
+#define EMIF_EXT_PHY_CTRL_CONST_REG 0x14
/* Reg mapping structure */
struct emif_reg_struct {
@@ -855,13 +855,10 @@
#define DPD_ENABLE 1
/* Maximum delay before Low Power Modes */
-#ifndef CONFIG_OMAP54XX
-#define REG_CS_TIM 0xF
-#else
#define REG_CS_TIM 0x0
-#endif
-#define REG_SR_TIM 0xF
-#define REG_PD_TIM 0xF
+#define REG_SR_TIM 0x0
+#define REG_PD_TIM 0x0
+
/* EMIF_PWR_MGMT_CTRL register */
#define EMIF_PWR_MGMT_CTRL (\
@@ -1113,6 +1110,7 @@
u32 freq;
u32 sdram_config_init;
u32 sdram_config;
+ u32 sdram_config2;
u32 ref_ctrl;
u32 sdram_tim1;
u32 sdram_tim2;
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index ee7b188..787e614 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -29,7 +29,7 @@
#include <common.h>
-#define NUM_SYS_CLKS 8
+#define NUM_SYS_CLKS 7
struct prcm_regs {
/* cm1.ckgen */
@@ -242,6 +242,8 @@
u32 cm_l3init_fsusb_clkctrl;
u32 cm_l3init_ocp2scp1_clkctrl;
+ u32 prm_irqstatus_mpu_2;
+
/* cm2.l4per */
u32 cm_l4per_clkstctrl;
u32 cm_l4per_dynamicdep;
@@ -301,6 +303,7 @@
/* l4 wkup regs */
u32 cm_abe_pll_ref_clksel;
u32 cm_sys_clksel;
+ u32 cm_abe_pll_sys_clksel;
u32 cm_wkup_clkstctrl;
u32 cm_wkup_l4wkup_clkctrl;
u32 cm_wkup_wdtimer1_clkctrl;
@@ -328,6 +331,8 @@
u32 prm_sldo_mpu_ctrl;
u32 prm_sldo_mm_setup;
u32 prm_sldo_mm_ctrl;
+ u32 prm_abbldo_mpu_setup;
+ u32 prm_abbldo_mpu_ctrl;
u32 cm_div_m4_dpll_core;
u32 cm_div_m5_dpll_core;
@@ -346,10 +351,15 @@
u32 cm_l3init_usbphy_clkctrl;
u32 cm_l4per_mcbsp4_clkctrl;
u32 prm_vc_cfg_channel;
+
+ /* SCRM stuff, used by some boards */
+ u32 scrm_auxclk0;
+ u32 scrm_auxclk1;
};
struct omap_sys_ctrl_regs {
u32 control_status;
+ u32 control_std_fuse_opp_vdd_mpu_2;
u32 control_core_mmr_lock1;
u32 control_core_mmr_lock2;
u32 control_core_mmr_lock3;
@@ -362,6 +372,7 @@
u32 control_ldosram_iva_voltage_ctrl;
u32 control_ldosram_mpu_voltage_ctrl;
u32 control_ldosram_core_voltage_ctrl;
+ u32 control_usbotghs_ctrl;
u32 control_padconf_core_base;
u32 control_paconf_global;
u32 control_paconf_mode;
@@ -394,6 +405,7 @@
u32 control_ddrio_0;
u32 control_ddrio_1;
u32 control_ddrio_2;
+ u32 control_ddr_control_ext_0;
u32 control_lpddr2io1_0;
u32 control_lpddr2io1_1;
u32 control_lpddr2io1_2;
@@ -419,6 +431,7 @@
u32 control_port_emif2_sdram_config;
u32 control_emif1_sdram_config_ext;
u32 control_emif2_sdram_config_ext;
+ u32 control_wkup_ldovbb_mpu_voltage_ctrl;
u32 control_smart1nopmio_padconf_0;
u32 control_smart1nopmio_padconf_1;
u32 control_padconf_mode;
@@ -494,11 +507,25 @@
u32 start_code;
unsigned gpio;
int gpio_en;
+ u32 i2c_slave_addr;
+ void (*pmic_bus_init)(void);
+ int (*pmic_write)(u8 sa, u8 reg_addr, u8 reg_data);
+};
+
+/**
+ * struct volts_efuse_data - efuse definition for voltage
+ * @reg: register address for efuse
+ * @reg_bits: Number of bits in a register address, mandatory.
+ */
+struct volts_efuse_data {
+ u32 reg;
+ u8 reg_bits;
};
struct volts {
u32 value;
u32 addr;
+ struct volts_efuse_data efuse;
struct pmic_data *pmic;
};
@@ -506,6 +533,9 @@
struct volts mpu;
struct volts core;
struct volts mm;
+ struct volts gpu;
+ struct volts eve;
+ struct volts iva;
};
extern struct prcm_regs const **prcm;
@@ -545,9 +575,9 @@
void scale_vcores(struct vcores_data const *);
u32 get_offset_code(u32 volt_offset, struct pmic_data *pmic);
void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic);
-
-/* Max value for DPLL multiplier M */
-#define OMAP_DPLL_MAX_N 127
+void abb_setup(u32 fuse, u32 ldovbb, u32 setup, u32 control,
+ u32 txdone, u32 txdone_mask, u32 opp);
+s8 abb_setup_ldovbb(u32 fuse, u32 ldovbb);
/* HW Init Context */
#define OMAP_INIT_CONTEXT_SPL 0
@@ -555,11 +585,32 @@
#define OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL 2
#define OMAP_INIT_CONTEXT_UBOOT_AFTER_CH 3
+/* ABB */
+#define OMAP_ABB_NOMINAL_OPP 0
+#define OMAP_ABB_FAST_OPP 1
+#define OMAP_ABB_SLOW_OPP 3
+#define OMAP_ABB_CONTROL_FAST_OPP_SEL_MASK (0x1 << 0)
+#define OMAP_ABB_CONTROL_SLOW_OPP_SEL_MASK (0x1 << 1)
+#define OMAP_ABB_CONTROL_OPP_CHANGE_MASK (0x1 << 2)
+#define OMAP_ABB_CONTROL_SR2_IN_TRANSITION_MASK (0x1 << 6)
+#define OMAP_ABB_SETUP_SR2EN_MASK (0x1 << 0)
+#define OMAP_ABB_SETUP_ACTIVE_FBB_SEL_MASK (0x1 << 2)
+#define OMAP_ABB_SETUP_ACTIVE_RBB_SEL_MASK (0x1 << 1)
+#define OMAP_ABB_SETUP_SR2_WTCNT_VALUE_MASK (0xff << 8)
+
static inline u32 omap_revision(void)
{
extern u32 *const omap_si_rev;
return *omap_si_rev;
}
+
+#define OMAP54xx 0x54000000
+
+static inline u8 is_omap54xx(void)
+{
+ extern u32 *const omap_si_rev;
+ return ((*omap_si_rev & 0xFF000000) == OMAP54xx);
+}
#endif
/*
diff --git a/arch/arm/include/asm/u-boot-arm.h b/arch/arm/include/asm/u-boot-arm.h
index f16861a..c01eef3 100644
--- a/arch/arm/include/asm/u-boot-arm.h
+++ b/arch/arm/include/asm/u-boot-arm.h
@@ -54,8 +54,6 @@
int board_init(void);
int dram_init (void);
void dram_init_banksize (void);
-void setup_serial_tag (struct tag **params);
-void setup_revision_tag (struct tag **params);
/* cpu/.../interrupt.c */
int arch_interrupt_init (void);
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 6ae161a..9ecafb2 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -39,12 +39,14 @@
SOBJS-y += crt0.o
ifndef CONFIG_SPL_BUILD
+SOBJS-y += relocate.o
ifndef CONFIG_SYS_GENERIC_BOARD
COBJS-y += board.o
endif
-COBJS-y += bss.o
+COBJS-y += sections.o
COBJS-y += bootm.o
+COBJS-$(CONFIG_OF_LIBFDT) += bootm-fdt.o
COBJS-$(CONFIG_SYS_L2_PL310) += cache-pl310.o
SOBJS-$(CONFIG_USE_ARCH_MEMSET) += memset.o
SOBJS-$(CONFIG_USE_ARCH_MEMCPY) += memcpy.o
diff --git a/arch/arm/lib/bootm-fdt.c b/arch/arm/lib/bootm-fdt.c
new file mode 100644
index 0000000..93888f8
--- /dev/null
+++ b/arch/arm/lib/bootm-fdt.c
@@ -0,0 +1,52 @@
+/*
+ * Copyright (c) 2013, Google Inc.
+ *
+ * Copyright (C) 2011
+ * Corscience GmbH & Co. KG - Simon Schwarz <schwarz@corscience.de>
+ * - Added prep subcommand support
+ * - Reorganized source - modeled after powerpc version
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * Copyright (C) 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <fdt_support.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int arch_fixup_memory_node(void *blob)
+{
+ bd_t *bd = gd->bd;
+ int bank;
+ u64 start[CONFIG_NR_DRAM_BANKS];
+ u64 size[CONFIG_NR_DRAM_BANKS];
+
+ for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) {
+ start[bank] = bd->bi_dram[bank].start;
+ size[bank] = bd->bi_dram[bank].size;
+ }
+
+ return fdt_fixup_memory_banks(blob, start, size, CONFIG_NR_DRAM_BANKS);
+}
diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c
index f3b30c5..1b6e0ac 100644
--- a/arch/arm/lib/bootm.c
+++ b/arch/arm/lib/bootm.c
@@ -22,7 +22,6 @@
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
*/
#include <common.h>
@@ -37,13 +36,7 @@
DECLARE_GLOBAL_DATA_PTR;
-#if defined(CONFIG_SETUP_MEMORY_TAGS) || \
- defined(CONFIG_CMDLINE_TAG) || \
- defined(CONFIG_INITRD_TAG) || \
- defined(CONFIG_SERIAL_TAG) || \
- defined(CONFIG_REVISION_TAG)
static struct tag *params;
-#endif
static ulong get_sp(void)
{
@@ -75,23 +68,6 @@
gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size - sp);
}
-#ifdef CONFIG_OF_LIBFDT
-static int fixup_memory_node(void *blob)
-{
- bd_t *bd = gd->bd;
- int bank;
- u64 start[CONFIG_NR_DRAM_BANKS];
- u64 size[CONFIG_NR_DRAM_BANKS];
-
- for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) {
- start[bank] = bd->bi_dram[bank].start;
- size[bank] = bd->bi_dram[bank].size;
- }
-
- return fdt_fixup_memory_banks(blob, start, size, CONFIG_NR_DRAM_BANKS);
-}
-#endif
-
static void announce_and_cleanup(void)
{
printf("\nStarting kernel ...\n\n");
@@ -109,11 +85,6 @@
cleanup_before_linux();
}
-#if defined(CONFIG_SETUP_MEMORY_TAGS) || \
- defined(CONFIG_CMDLINE_TAG) || \
- defined(CONFIG_INITRD_TAG) || \
- defined(CONFIG_SERIAL_TAG) || \
- defined(CONFIG_REVISION_TAG)
static void setup_start_tag (bd_t *bd)
{
params = (struct tag *)bd->bi_boot_params;
@@ -127,9 +98,7 @@
params = tag_next (params);
}
-#endif
-#ifdef CONFIG_SETUP_MEMORY_TAGS
static void setup_memory_tags(bd_t *bd)
{
int i;
@@ -144,9 +113,7 @@
params = tag_next (params);
}
}
-#endif
-#ifdef CONFIG_CMDLINE_TAG
static void setup_commandline_tag(bd_t *bd, char *commandline)
{
char *p;
@@ -171,9 +138,7 @@
params = tag_next (params);
}
-#endif
-#ifdef CONFIG_INITRD_TAG
static void setup_initrd_tag(bd_t *bd, ulong initrd_start, ulong initrd_end)
{
/* an ATAG_INITRD node tells the kernel where the compressed
@@ -187,14 +152,11 @@
params = tag_next (params);
}
-#endif
-#ifdef CONFIG_SERIAL_TAG
-void setup_serial_tag(struct tag **tmp)
+static void setup_serial_tag(struct tag **tmp)
{
struct tag *params = *tmp;
struct tag_serialnr serialnr;
- void get_board_serial(struct tag_serialnr *serialnr);
get_board_serial(&serialnr);
params->hdr.tag = ATAG_SERIAL;
@@ -204,13 +166,10 @@
params = tag_next (params);
*tmp = params;
}
-#endif
-#ifdef CONFIG_REVISION_TAG
-void setup_revision_tag(struct tag **in_params)
+static void setup_revision_tag(struct tag **in_params)
{
u32 rev = 0;
- u32 get_board_rev(void);
rev = get_board_rev();
params->hdr.tag = ATAG_REVISION;
@@ -218,106 +177,50 @@
params->u.revision.rev = rev;
params = tag_next (params);
}
-#endif
-#if defined(CONFIG_SETUP_MEMORY_TAGS) || \
- defined(CONFIG_CMDLINE_TAG) || \
- defined(CONFIG_INITRD_TAG) || \
- defined(CONFIG_SERIAL_TAG) || \
- defined(CONFIG_REVISION_TAG)
static void setup_end_tag(bd_t *bd)
{
params->hdr.tag = ATAG_NONE;
params->hdr.size = 0;
}
-#endif
-
-#ifdef CONFIG_OF_LIBFDT
-static int create_fdt(bootm_headers_t *images)
-{
- ulong of_size = images->ft_len;
- char **of_flat_tree = &images->ft_addr;
- ulong *initrd_start = &images->initrd_start;
- ulong *initrd_end = &images->initrd_end;
- struct lmb *lmb = &images->lmb;
- ulong rd_len;
- int ret;
-
- debug("using: FDT\n");
-
- boot_fdt_add_mem_rsv_regions(lmb, *of_flat_tree);
-
- rd_len = images->rd_end - images->rd_start;
- ret = boot_ramdisk_high(lmb, images->rd_start, rd_len,
- initrd_start, initrd_end);
- if (ret)
- return ret;
-
- ret = boot_relocate_fdt(lmb, of_flat_tree, &of_size);
- if (ret)
- return ret;
-
- fdt_chosen(*of_flat_tree, 1);
- fixup_memory_node(*of_flat_tree);
- fdt_fixup_ethernet(*of_flat_tree);
- fdt_initrd(*of_flat_tree, *initrd_start, *initrd_end, 1);
-#ifdef CONFIG_OF_BOARD_SETUP
- ft_board_setup(*of_flat_tree, gd->bd);
-#endif
-
- return 0;
-}
-#endif
__weak void setup_board_tags(struct tag **in_params) {}
/* Subcommand: PREP */
static void boot_prep_linux(bootm_headers_t *images)
{
-#ifdef CONFIG_CMDLINE_TAG
char *commandline = getenv("bootargs");
-#endif
+ if (IMAGE_ENABLE_OF_LIBFDT && images->ft_len) {
#ifdef CONFIG_OF_LIBFDT
- if (images->ft_len) {
debug("using: FDT\n");
- if (create_fdt(images)) {
+ if (image_setup_linux(images)) {
printf("FDT creation failed! hanging...");
hang();
}
- } else
#endif
- {
-#if defined(CONFIG_SETUP_MEMORY_TAGS) || \
- defined(CONFIG_CMDLINE_TAG) || \
- defined(CONFIG_INITRD_TAG) || \
- defined(CONFIG_SERIAL_TAG) || \
- defined(CONFIG_REVISION_TAG)
+ } else if (BOOTM_ENABLE_TAGS) {
debug("using: ATAGS\n");
setup_start_tag(gd->bd);
-#ifdef CONFIG_SERIAL_TAG
- setup_serial_tag(¶ms);
-#endif
-#ifdef CONFIG_CMDLINE_TAG
- setup_commandline_tag(gd->bd, commandline);
-#endif
-#ifdef CONFIG_REVISION_TAG
- setup_revision_tag(¶ms);
-#endif
-#ifdef CONFIG_SETUP_MEMORY_TAGS
- setup_memory_tags(gd->bd);
-#endif
-#ifdef CONFIG_INITRD_TAG
- if (images->rd_start && images->rd_end)
- setup_initrd_tag(gd->bd, images->rd_start,
- images->rd_end);
-#endif
+ if (BOOTM_ENABLE_SERIAL_TAG)
+ setup_serial_tag(¶ms);
+ if (BOOTM_ENABLE_CMDLINE_TAG)
+ setup_commandline_tag(gd->bd, commandline);
+ if (BOOTM_ENABLE_REVISION_TAG)
+ setup_revision_tag(¶ms);
+ if (BOOTM_ENABLE_MEMORY_TAGS)
+ setup_memory_tags(gd->bd);
+ if (BOOTM_ENABLE_INITRD_TAG) {
+ if (images->rd_start && images->rd_end) {
+ setup_initrd_tag(gd->bd, images->rd_start,
+ images->rd_end);
+ }
+ }
setup_board_tags(¶ms);
setup_end_tag(gd->bd);
-#else /* all tags */
+ } else {
printf("FDT and ATAGS support not compiled in - hanging\n");
hang();
-#endif /* all tags */
}
}
@@ -342,11 +245,9 @@
bootstage_mark(BOOTSTAGE_ID_RUN_OS);
announce_and_cleanup();
-#ifdef CONFIG_OF_LIBFDT
- if (images->ft_len)
+ if (IMAGE_ENABLE_OF_LIBFDT && images->ft_len)
r2 = (unsigned long)images->ft_addr;
else
-#endif
r2 = gd->bd->bi_boot_params;
kernel_entry(0, machid, r2);
diff --git a/arch/arm/lib/cache.c b/arch/arm/lib/cache.c
index b545fb7..8b1c8ed 100644
--- a/arch/arm/lib/cache.c
+++ b/arch/arm/lib/cache.c
@@ -27,7 +27,7 @@
void __flush_cache(unsigned long start, unsigned long size)
{
-#if defined(CONFIG_OMAP2420) || defined(CONFIG_ARM1136)
+#if defined(CONFIG_ARM1136)
void arm1136_cache_flush(void);
arm1136_cache_flush();
diff --git a/arch/arm/lib/crt0.S b/arch/arm/lib/crt0.S
index a9657d1..a5bffb8 100644
--- a/arch/arm/lib/crt0.S
+++ b/arch/arm/lib/crt0.S
@@ -97,13 +97,13 @@
* 'here' but relocated.
*/
- ldr sp, [r8, #GD_START_ADDR_SP] /* r8 = gd->start_addr_sp */
+ ldr sp, [r8, #GD_START_ADDR_SP] /* sp = gd->start_addr_sp */
bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
ldr r8, [r8, #GD_BD] /* r8 = gd->bd */
sub r8, r8, #GD_SIZE /* new GD is below bd */
adr lr, here
- ldr r0, [r8, #GD_RELOC_OFF] /* lr = gd->start_addr_sp */
+ ldr r0, [r8, #GD_RELOC_OFF] /* r0 = gd->reloc_off */
add lr, lr, r0
ldr r0, [r8, #GD_RELOCADDR] /* r0 = gd->relocaddr */
b relocate_code
diff --git a/arch/arm/lib/relocate.S b/arch/arm/lib/relocate.S
new file mode 100644
index 0000000..cd2bab6
--- /dev/null
+++ b/arch/arm/lib/relocate.S
@@ -0,0 +1,90 @@
+/*
+ * relocate - common relocation function for ARM U-Boot
+ *
+ * Copyright (c) 2013 Albert ARIBAUD <albert.u.boot@aribaud.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <linux/linkage.h>
+
+/*
+ * void relocate_code(addr_moni)
+ *
+ * This function relocates the monitor code.
+ *
+ * NOTE:
+ * To prevent the code below from containing references with an R_ARM_ABS32
+ * relocation record type, we never refer to linker-defined symbols directly.
+ * Instead, we declare literals which contain their relative location with
+ * respect to relocate_code, and at run time, add relocate_code back to them.
+ */
+
+ENTRY(relocate_code)
+ ldr r1, =__image_copy_start /* r1 <- SRC &__image_copy_start */
+ subs r9, r0, r1 /* r9 <- relocation offset */
+ beq relocate_done /* skip relocation */
+ ldr r2, =__image_copy_end /* r2 <- SRC &__image_copy_end */
+
+copy_loop:
+ ldmia r1!, {r10-r11} /* copy from source address [r1] */
+ stmia r0!, {r10-r11} /* copy to target address [r0] */
+ cmp r1, r2 /* until source end address [r2] */
+ blo copy_loop
+
+ /*
+ * fix .rel.dyn relocations
+ */
+ ldr r2, =__rel_dyn_start /* r2 <- SRC &__rel_dyn_start */
+ ldr r3, =__rel_dyn_end /* r3 <- SRC &__rel_dyn_end */
+fixloop:
+ ldmia r2!, {r0-r1} /* (r0,r1) <- (SRC location,fixup) */
+ and r1, r1, #0xff
+ cmp r1, #23 /* relative fixup? */
+ bne fixnext
+
+ /* relative fix: increase location by offset */
+ add r0, r0, r9
+ ldr r1, [r0]
+ add r1, r1, r9
+ str r1, [r0]
+fixnext:
+ cmp r2, r3
+ blo fixloop
+
+relocate_done:
+
+#ifdef __XSCALE__
+ /*
+ * On xscale, icache must be invalidated and write buffers drained,
+ * even with cache disabled - 4.2.7 of xscale core developer's manual
+ */
+ mcr p15, 0, r0, c7, c7, 0 /* invalidate icache */
+ mcr p15, 0, r0, c7, c10, 4 /* drain write buffer */
+#endif
+
+ /* ARMv4- don't know bx lr but the assembler fails to see that */
+
+#ifdef __ARM_ARCH_4__
+ mov pc, lr
+#else
+ bx lr
+#endif
+
+ENDPROC(relocate_code)
diff --git a/arch/arm/lib/bss.c b/arch/arm/lib/sections.c
similarity index 79%
rename from arch/arm/lib/bss.c
rename to arch/arm/lib/sections.c
index 99eda59..5921dd8 100644
--- a/arch/arm/lib/bss.c
+++ b/arch/arm/lib/sections.c
@@ -35,5 +35,9 @@
* aliasing warnings.
*/
-char __bss_start[0] __attribute__((used, section(".__bss_start")));
-char __bss_end[0] __attribute__((used, section(".__bss_end")));
+char __bss_start[0] __attribute__((section(".__bss_start")));
+char __bss_end[0] __attribute__((section(".__bss_end")));
+char __image_copy_start[0] __attribute__((section(".__image_copy_start")));
+char __image_copy_end[0] __attribute__((section(".__image_copy_end")));
+char __rel_dyn_start[0] __attribute__((section(".__rel_dyn_start")));
+char __rel_dyn_end[0] __attribute__((section(".__rel_dyn_end")));
diff --git a/arch/avr32/lib/board.c b/arch/avr32/lib/board.c
index ccf862a..2e79e98 100644
--- a/arch/avr32/lib/board.c
+++ b/arch/avr32/lib/board.c
@@ -116,7 +116,7 @@
printf ("\n\n%s\n\n", version_string);
printf ("U-Boot code: %08lx -> %08lx data: %08lx -> %08lx\n",
(unsigned long)_text, (unsigned long)_etext,
- (unsigned long)_data, (unsigned long)__bss_end);
+ (unsigned long)_data, (unsigned long)(&__bss_end));
return 0;
}
@@ -183,7 +183,7 @@
* - stack
*/
addr = CONFIG_SYS_SDRAM_BASE + sdram_size;
- monitor_len = (char *)__bss_end - _text;
+ monitor_len = (char *)(&__bss_end) - _text;
/*
* Reserve memory for u-boot code, data and bss.
diff --git a/arch/blackfin/cpu/Makefile b/arch/blackfin/cpu/Makefile
index 0a72ec5..1421cb2 100644
--- a/arch/blackfin/cpu/Makefile
+++ b/arch/blackfin/cpu/Makefile
@@ -18,14 +18,12 @@
SEXTRA := start.o
SOBJS := interrupt.o cache.o
COBJS-y += cpu.o
-COBJS-y += gpio.o
+COBJS-$(CONFIG_ADI_GPIO1) += gpio.o
COBJS-y += interrupts.o
COBJS-$(CONFIG_JTAG_CONSOLE) += jtag-console.o
COBJS-y += os_log.o
COBJS-y += reset.o
-COBJS-y += serial.o
COBJS-y += traps.o
-COBJS-$(CONFIG_HW_WATCHDOG) += watchdog.o
SRCS := $(SEXTRA:.o=.S) $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS-y) $(SOBJS))
diff --git a/arch/blackfin/cpu/cpu.c b/arch/blackfin/cpu/cpu.c
index 0be2e2b..218f57e 100644
--- a/arch/blackfin/cpu/cpu.c
+++ b/arch/blackfin/cpu/cpu.c
@@ -16,13 +16,39 @@
#include <asm/mach-common/bits/core.h>
#include <asm/mach-common/bits/ebiu.h>
#include <asm/mach-common/bits/trace.h>
+#include <asm/serial.h>
#include "cpu.h"
-#include "serial.h"
#include "initcode.h"
ulong bfin_poweron_retx;
+#if defined(CONFIG_CORE1_RUN) && defined(COREB_L1_CODE_START)
+void bfin_core1_start(void)
+{
+#ifdef BF561_FAMILY
+ /* Enable core 1 */
+ bfin_write_SYSCR(bfin_read_SYSCR() & ~0x0020);
+#else
+ /* Enable core 1 */
+ bfin_write32(RCU0_SVECT1, COREB_L1_CODE_START);
+ bfin_write32(RCU0_CRCTL, 0);
+
+ bfin_write32(RCU0_CRCTL, 0x2);
+
+ /* Check if core 1 starts */
+ while (!(bfin_read32(RCU0_CRSTAT) & 0x2))
+ continue;
+
+ bfin_write32(RCU0_CRCTL, 0);
+
+ /* flag to notify cces core 1 application */
+ bfin_write32(SDU0_MSG_SET, (1 << 19));
+#endif
+}
+#endif
+
+__attribute__ ((__noreturn__))
void cpu_init_f(ulong bootflag, ulong loaded_from_ldr)
{
#ifndef CONFIG_BFIN_BOOTROM_USES_EVT1
@@ -72,6 +98,10 @@
# endif
#endif
+#if defined(CONFIG_CORE1_RUN) && defined(COREB_L1_CODE_START)
+ bfin_core1_start();
+#endif
+
serial_early_puts("Board init flash\n");
board_init_f(bootflag);
}
diff --git a/arch/blackfin/cpu/gpio.c b/arch/blackfin/cpu/gpio.c
index f684be5..f74a0b7 100644
--- a/arch/blackfin/cpu/gpio.c
+++ b/arch/blackfin/cpu/gpio.c
@@ -1,5 +1,6 @@
/*
- * GPIO Abstraction Layer
+ * ADI GPIO1 Abstraction Layer
+ * Support BF50x, BF51x, BF52x, BF53x and BF561 only.
*
* Copyright 2006-2010 Analog Devices Inc.
*
@@ -55,25 +56,6 @@
(struct gpio_port_t *) FIO0_FLAG_D,
(struct gpio_port_t *) FIO1_FLAG_D,
(struct gpio_port_t *) FIO2_FLAG_D,
-#elif defined(CONFIG_BF54x)
- (struct gpio_port_t *)PORTA_FER,
- (struct gpio_port_t *)PORTB_FER,
- (struct gpio_port_t *)PORTC_FER,
- (struct gpio_port_t *)PORTD_FER,
- (struct gpio_port_t *)PORTE_FER,
- (struct gpio_port_t *)PORTF_FER,
- (struct gpio_port_t *)PORTG_FER,
- (struct gpio_port_t *)PORTH_FER,
- (struct gpio_port_t *)PORTI_FER,
- (struct gpio_port_t *)PORTJ_FER,
-#elif defined(CONFIG_BF60x)
- (struct gpio_port_t *)PORTA_FER,
- (struct gpio_port_t *)PORTB_FER,
- (struct gpio_port_t *)PORTC_FER,
- (struct gpio_port_t *)PORTD_FER,
- (struct gpio_port_t *)PORTE_FER,
- (struct gpio_port_t *)PORTF_FER,
- (struct gpio_port_t *)PORTG_FER,
#else
# error no gpio arrays defined
#endif
@@ -174,12 +156,6 @@
inline int check_gpio(unsigned gpio)
{
-#if defined(CONFIG_BF54x)
- if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15
- || gpio == GPIO_PH14 || gpio == GPIO_PH15
- || gpio == GPIO_PJ14 || gpio == GPIO_PJ15)
- return -EINVAL;
-#endif
if (gpio >= MAX_BLACKFIN_GPIOS)
return -EINVAL;
return 0;
@@ -218,18 +194,6 @@
else
*port_fer[gpio_bank(gpio)] |= gpio_bit(gpio);
SSYNC();
-#elif defined(CONFIG_BF54x)
- if (usage == GPIO_USAGE)
- gpio_array[gpio_bank(gpio)]->port_fer &= ~gpio_bit(gpio);
- else
- gpio_array[gpio_bank(gpio)]->port_fer |= gpio_bit(gpio);
- SSYNC();
-#elif defined(CONFIG_BF60x)
- if (usage == GPIO_USAGE)
- gpio_array[gpio_bank(gpio)]->port_fer_clear = gpio_bit(gpio);
- else
- gpio_array[gpio_bank(gpio)]->port_fer_set = gpio_bit(gpio);
- SSYNC();
#endif
}
@@ -304,30 +268,6 @@
}
}
}
-#elif defined(CONFIG_BF54x) || defined(CONFIG_BF60x)
-inline void portmux_setup(unsigned short per)
-{
- u32 pmux;
- u16 ident = P_IDENT(per);
- u16 function = P_FUNCT2MUX(per);
-
- pmux = gpio_array[gpio_bank(ident)]->port_mux;
-
- pmux &= ~(0x3 << (2 * gpio_sub_n(ident)));
- pmux |= (function & 0x3) << (2 * gpio_sub_n(ident));
-
- gpio_array[gpio_bank(ident)]->port_mux = pmux;
-}
-
-inline u16 get_portmux(unsigned short per)
-{
- u32 pmux;
- u16 ident = P_IDENT(per);
-
- pmux = gpio_array[gpio_bank(ident)]->port_mux;
-
- return (pmux >> (2 * gpio_sub_n(ident)) & 0x3);
-}
#elif defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
inline void portmux_setup(unsigned short per)
{
@@ -344,7 +284,6 @@
# define portmux_setup(...) do { } while (0)
#endif
-#if !defined(CONFIG_BF54x) && !defined(CONFIG_BF60x)
/***********************************************************
*
* FUNCTIONS: Blackfin General Purpose Ports Access Functions
@@ -491,15 +430,6 @@
GET_GPIO_P(maska)
GET_GPIO_P(maskb)
-#else /* CONFIG_BF54x */
-
-unsigned short get_gpio_dir(unsigned gpio)
-{
- return (0x01 & (gpio_array[gpio_bank(gpio)]->dir_clear >> gpio_sub_n(gpio)));
-}
-
-#endif /* CONFIG_BF54x */
-
/***********************************************************
*
* FUNCTIONS: Blackfin Peripheral Resource Allocation
@@ -548,11 +478,7 @@
* be requested and used by several drivers
*/
-#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x)
- if (!((per & P_MAYSHARE) && get_portmux(per) == P_FUNCT2MUX(per))) {
-#else
if (!(per & P_MAYSHARE)) {
-#endif
/*
* Allow that the identical pin function can
* be requested from the same driver twice
@@ -641,7 +567,7 @@
* MODIFICATION HISTORY :
**************************************************************/
-int bfin_gpio_request(unsigned gpio, const char *label)
+int gpio_request(unsigned gpio, const char *label)
{
if (check_gpio(gpio) < 0)
return -EINVAL;
@@ -665,11 +591,9 @@
gpio, get_label(gpio));
return -EBUSY;
}
-#if !defined(CONFIG_BF54x) && !defined(CONFIG_BF60x)
else { /* Reset POLAR setting when acquiring a gpio for the first time */
set_gpio_polar(gpio, 0);
}
-#endif
reserve(gpio, gpio);
set_label(gpio, label);
@@ -679,27 +603,27 @@
return 0;
}
-#ifdef CONFIG_BFIN_GPIO_TRACK
-void bfin_gpio_free(unsigned gpio)
+int gpio_free(unsigned gpio)
{
if (check_gpio(gpio) < 0)
- return;
+ return -1;
if (unlikely(!is_reserved(gpio, gpio, 0))) {
gpio_error(gpio);
- return;
+ return -1;
}
unreserve(gpio, gpio);
set_label(gpio, "free");
-}
-#endif
-#ifdef BFIN_SPECIAL_GPIO_BANKS
+ return 0;
+}
+
+#ifdef ADI_SPECIAL_GPIO_BANKS
DECLARE_RESERVED_MAP(special_gpio, gpio_bank(MAX_RESOURCES));
-int bfin_special_gpio_request(unsigned gpio, const char *label)
+int special_gpio_request(unsigned gpio, const char *label)
{
/*
* Allow that the identical GPIO can
@@ -731,7 +655,7 @@
return 0;
}
-void bfin_special_gpio_free(unsigned gpio)
+void special_gpio_free(unsigned gpio)
{
if (unlikely(!is_reserved(special_gpio, gpio, 0))) {
gpio_error(gpio);
@@ -744,21 +668,13 @@
}
#endif
-static inline void __bfin_gpio_direction_input(unsigned gpio)
+static inline void __gpio_direction_input(unsigned gpio)
{
-#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x)
- gpio_array[gpio_bank(gpio)]->dir_clear = gpio_bit(gpio);
-#else
gpio_array[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio);
-#endif
-#if defined(CONFIG_BF60x)
- gpio_array[gpio_bank(gpio)]->inen_set = gpio_bit(gpio);
-#else
gpio_array[gpio_bank(gpio)]->inen |= gpio_bit(gpio);
-#endif
}
-int bfin_gpio_direction_input(unsigned gpio)
+int gpio_direction_input(unsigned gpio)
{
unsigned long flags;
@@ -768,31 +684,24 @@
}
local_irq_save(flags);
- __bfin_gpio_direction_input(gpio);
+ __gpio_direction_input(gpio);
AWA_DUMMY_READ(inen);
local_irq_restore(flags);
return 0;
}
-void bfin_gpio_toggle_value(unsigned gpio)
-{
-#ifdef CONFIG_BF54x
- gpio_set_value(gpio, !gpio_get_value(gpio));
-#else
- gpio_array[gpio_bank(gpio)]->toggle = gpio_bit(gpio);
-#endif
-}
-
-void bfin_gpio_set_value(unsigned gpio, int arg)
+int gpio_set_value(unsigned gpio, int arg)
{
if (arg)
gpio_array[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
else
gpio_array[gpio_bank(gpio)]->data_clear = gpio_bit(gpio);
+
+ return 0;
}
-int bfin_gpio_direction_output(unsigned gpio, int value)
+int gpio_direction_output(unsigned gpio, int value)
{
unsigned long flags;
@@ -803,17 +712,9 @@
local_irq_save(flags);
-#if defined(CONFIG_BF60x)
- gpio_array[gpio_bank(gpio)]->inen_clear = gpio_bit(gpio);
-#else
gpio_array[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio);
-#endif
gpio_set_value(gpio, value);
-#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x)
- gpio_array[gpio_bank(gpio)]->dir_set = gpio_bit(gpio);
-#else
gpio_array[gpio_bank(gpio)]->dir |= gpio_bit(gpio);
-#endif
AWA_DUMMY_READ(dir);
local_irq_restore(flags);
@@ -821,11 +722,8 @@
return 0;
}
-int bfin_gpio_get_value(unsigned gpio)
+int gpio_get_value(unsigned gpio)
{
-#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x)
- return (1 & (gpio_array[gpio_bank(gpio)]->data >> gpio_sub_n(gpio)));
-#else
unsigned long flags;
if (unlikely(get_gpio_edge(gpio))) {
@@ -838,7 +736,6 @@
return ret;
} else
return get_gpio_data(gpio);
-#endif
}
/* If we are booting from SPI and our board lacks a strong enough pull up,
@@ -860,8 +757,7 @@
udelay(1);
}
-#ifdef CONFIG_BFIN_GPIO_TRACK
-void bfin_gpio_labels(void)
+void gpio_labels(void)
{
int c, gpio;
@@ -877,4 +773,3 @@
continue;
}
}
-#endif
diff --git a/arch/blackfin/cpu/initcode.c b/arch/blackfin/cpu/initcode.c
index 1a06680..ffaf101 100644
--- a/arch/blackfin/cpu/initcode.c
+++ b/arch/blackfin/cpu/initcode.c
@@ -13,12 +13,12 @@
#include <config.h>
#include <asm/blackfin.h>
+#include <asm/mach-common/bits/watchdog.h>
#include <asm/mach-common/bits/bootrom.h>
#include <asm/mach-common/bits/core.h>
+#include <asm/serial.h>
-#define BUG() while (1) { asm volatile("emuexcpt;"); }
-
-#include "serial.h"
+#define BUG() while (1) asm volatile("emuexcpt;");
#ifndef __ADSPBF60x__
#include <asm/mach-common/bits/ebiu.h>
@@ -193,17 +193,12 @@
}
#endif
+#if CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_BYPASS
if (BFIN_DEBUG_EARLY_SERIAL) {
- int enabled = serial_early_enabled(uart_base);
-
serial_early_init(uart_base);
-
- /* If the UART is off, that means we need to program
- * the baud rate ourselves initially.
- */
- if (!enabled)
- serial_early_set_baud(uart_base, CONFIG_BAUDRATE);
+ serial_early_set_baud(uart_base, CONFIG_BAUDRATE);
}
+#endif
}
__attribute__((always_inline))
@@ -262,7 +257,8 @@
"%1 = RETS;" /* Load addr of NMI handler */
"RETS = %0;" /* Restore RETS */
"[%2] = %1;" /* Write NMI handler */
- : "=r"(tmp1), "=r"(tmp2) : "ab"(EVT2)
+ : "=d"(tmp1), "=d"(tmp2)
+ : "ab"(EVT2)
);
}
@@ -462,19 +458,29 @@
if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_BYPASS) {
serial_putc('e');
#ifdef __ADSPBF60x__
+ /* Reset system event controller */
bfin_write_SEC_GCTL(0x2);
- SSYNC();
- bfin_write_SEC_FCTL(0xc1);
- bfin_write_SEC_SCTL(2, bfin_read_SEC_SCTL(2) | 0x6);
-
bfin_write_SEC_CCTL(0x2);
SSYNC();
+
+ /* Enable fault event input and system reset action in fault
+ * controller. Route watchdog timeout event to fault interface.
+ */
+ bfin_write_SEC_FCTL(0xc1);
+ /* Enable watchdog interrupt source */
+ bfin_write_SEC_SCTL(2, bfin_read_SEC_SCTL(2) | 0x6);
+ SSYNC();
+
+ /* Enable system event controller */
bfin_write_SEC_GCTL(0x1);
bfin_write_SEC_CCTL(0x1);
+ SSYNC();
#endif
+ bfin_write_WDOG_CTL(WDDIS);
+ SSYNC();
bfin_write_WDOG_CNT(MSEC_TO_SCLK(CONFIG_HW_WATCHDOG_TIMEOUT_INITCODE));
#if CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_UART
- bfin_write_WDOG_CTL(0);
+ bfin_write_WDOG_CTL(WDEN);
#endif
serial_putc('f');
}
@@ -713,37 +719,32 @@
__attribute__((always_inline)) static inline void
update_serial_clocks(ADI_BOOT_DATA *bs, uint sdivB, uint divB, uint vcoB)
{
- serial_putc('a');
-
/* Since we've changed the SCLK above, we may need to update
* the UART divisors (UART baud rates are based on SCLK).
* Do the division by hand as there are no native instructions
* for dividing which means we'd generate a libgcc reference.
*/
- if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART) {
- unsigned int sdivR, vcoR;
- int dividend = sdivB * divB * vcoR;
- int divisor = vcoB * sdivR;
- unsigned int quotient;
+ unsigned int sdivR, vcoR;
+ unsigned int dividend;
+ unsigned int divisor;
+ unsigned int quotient;
- serial_putc('b');
+ serial_putc('a');
#ifdef __ADSPBF60x__
- sdivR = bfin_read_CGU_DIV();
- sdivR = ((sdivR >> 8) & 0x1f) * ((sdivR >> 5) & 0x7);
- vcoR = (bfin_read_CGU_CTL() >> 8) & 0x7f;
+ sdivR = bfin_read_CGU_DIV();
+ sdivR = ((sdivR >> 8) & 0x1f) * ((sdivR >> 5) & 0x7);
+ vcoR = (bfin_read_CGU_CTL() >> 8) & 0x7f;
#else
- sdivR = bfin_read_PLL_DIV() & 0xf;
- vcoR = (bfin_read_PLL_CTL() >> 9) & 0x3f;
+ sdivR = bfin_read_PLL_DIV() & 0xf;
+ vcoR = (bfin_read_PLL_CTL() >> 9) & 0x3f;
#endif
- for (quotient = 0; dividend > 0; ++quotient)
- dividend -= divisor;
- serial_early_put_div(quotient - ANOMALY_05000230);
- serial_putc('c');
- }
-
- serial_putc('d');
+ dividend = sdivB * divB * vcoR;
+ divisor = vcoB * sdivR;
+ quotient = early_division(dividend, divisor);
+ serial_early_put_div(quotient - ANOMALY_05000230);
+ serial_putc('c');
}
__attribute__((always_inline)) static inline void
diff --git a/arch/blackfin/cpu/start.S b/arch/blackfin/cpu/start.S
index 7155fc8..da084a8 100644
--- a/arch/blackfin/cpu/start.S
+++ b/arch/blackfin/cpu/start.S
@@ -32,10 +32,10 @@
#include <config.h>
#include <asm/blackfin.h>
+#include <asm/mach-common/bits/watchdog.h>
#include <asm/mach-common/bits/core.h>
#include <asm/mach-common/bits/pll.h>
-
-#include "serial.h"
+#include <asm/serial.h>
/* It may seem odd that we make calls to functions even though we haven't
* relocated ourselves yet out of {flash,ram,wherever}. This is OK because
@@ -65,20 +65,29 @@
p5.h = HI(COREMMR_BASE);
#ifdef CONFIG_HW_WATCHDOG
-#ifndef __ADSPBF60x__
-# ifndef CONFIG_HW_WATCHDOG_TIMEOUT_START
-# define CONFIG_HW_WATCHDOG_TIMEOUT_START 5000
-# endif
- /* Program the watchdog with an initial timeout of ~5 seconds.
+ /* Program the watchdog with default timeout of ~5 seconds.
* That should be long enough to bootstrap ourselves up and
* then the common u-boot code can take over.
*/
+ r1 = WDDIS;
+# ifdef __ADSPBF60x__
+ [p4 + (WDOG_CTL - SYSMMR_BASE)] = r1;
+# else
+ W[p4 + (WDOG_CTL - SYSMMR_BASE)] = r1;
+# endif
+ SSYNC;
r0 = 0;
- r0.h = HI(MSEC_TO_SCLK(CONFIG_HW_WATCHDOG_TIMEOUT_START));
+ r0.h = HI(MSEC_TO_SCLK(CONFIG_WATCHDOG_TIMEOUT_MSECS));
[p4 + (WDOG_CNT - SYSMMR_BASE)] = r0;
+ SSYNC;
+ r1 = WDEN;
/* fire up the watchdog - R0.L above needs to be 0x0000 */
- W[p4 + (WDOG_CTL - SYSMMR_BASE)] = r0;
-#endif
+# ifdef __ADSPBF60x__
+ [p4 + (WDOG_CTL - SYSMMR_BASE)] = r1;
+# else
+ W[p4 + (WDOG_CTL - SYSMMR_BASE)] = r1;
+# endif
+ SSYNC;
#endif
/* Turn on the serial for debugging the init process */
diff --git a/arch/blackfin/include/asm/clock.h b/arch/blackfin/include/asm/clock.h
new file mode 100644
index 0000000..f1fcd40
--- /dev/null
+++ b/arch/blackfin/include/asm/clock.h
@@ -0,0 +1,78 @@
+
+/*
+ * Copyright (C) 2012 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __CLOCK_H__
+#define __CLOCK_H__
+
+#include <asm/blackfin.h>
+#ifdef PLL_CTL
+#include <asm/mach-common/bits/pll.h>
+# define pll_is_bypassed() (bfin_read_PLL_CTL() & BYPASS)
+#else
+#include <asm/mach-common/bits/cgu.h>
+# define pll_is_bypassed() (bfin_read_CGU_STAT() & PLLBP)
+# define bfin_read_PLL_CTL() bfin_read_CGU_CTL()
+# define bfin_read_PLL_DIV() bfin_read_CGU_DIV()
+# define SSEL SYSSEL
+# define SSEL_P SYSSEL_P
+#endif
+
+__attribute__((always_inline))
+static inline uint32_t early_division(uint32_t dividend, uint32_t divisor)
+{
+ uint32_t quotient;
+ uint32_t i, j;
+
+ for (quotient = 1, i = 1; dividend > divisor; ++i) {
+ j = divisor << i;
+ if (j > dividend || (j & 0x80000000)) {
+ --i;
+ quotient += (1 << i);
+ dividend -= (divisor << i);
+ i = 0;
+ }
+ }
+
+ return quotient;
+}
+
+__attribute__((always_inline))
+static inline uint32_t early_get_uart_clk(void)
+{
+ uint32_t msel, pll_ctl, vco;
+ uint32_t div, ssel, sclk, uclk;
+
+ pll_ctl = bfin_read_PLL_CTL();
+ msel = (pll_ctl & MSEL) >> MSEL_P;
+ if (msel == 0)
+ msel = (MSEL >> MSEL_P) + 1;
+
+ vco = (CONFIG_CLKIN_HZ >> (pll_ctl & DF)) * msel;
+ sclk = vco;
+ if (!pll_is_bypassed()) {
+ div = bfin_read_PLL_DIV();
+ ssel = (div & SSEL) >> SSEL_P;
+#if CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS
+ sclk = vco/ssel;
+#else
+ sclk = early_division(vco, ssel);
+#endif
+ }
+ uclk = sclk;
+#ifdef CGU_DIV
+ ssel = (div & S0SEL) >> S0SEL_P;
+ uclk = early_division(sclk, ssel);
+#endif
+ return uclk;
+}
+
+#ifdef CGU_DIV
+# define get_uart_clk get_sclk0
+#else
+# define get_uart_clk get_sclk
+#endif
+
+#endif
diff --git a/arch/blackfin/include/asm/dma.h b/arch/blackfin/include/asm/dma.h
index ef1db6e..8a7c079 100644
--- a/arch/blackfin/include/asm/dma.h
+++ b/arch/blackfin/include/asm/dma.h
@@ -17,21 +17,21 @@
struct dmasg_large {
void *next_desc_addr;
- unsigned long start_addr;
- unsigned short cfg;
- unsigned short x_count;
- short x_modify;
- unsigned short y_count;
- short y_modify;
+ u32 start_addr;
+ u16 cfg;
+ u16 x_count;
+ s16 x_modify;
+ u16 y_count;
+ s16 y_modify;
} __attribute__((packed));
struct dmasg {
- unsigned long start_addr;
- unsigned short cfg;
- unsigned short x_count;
- short x_modify;
- unsigned short y_count;
- short y_modify;
+ u32 start_addr;
+ u16 cfg;
+ u16 x_count;
+ s16 x_modify;
+ u16 y_count;
+ s16 y_modify;
} __attribute__((packed));
struct dma_register {
diff --git a/arch/blackfin/include/asm/gpio.h b/arch/blackfin/include/asm/gpio.h
index 05131b5..58a6191 100644
--- a/arch/blackfin/include/asm/gpio.h
+++ b/arch/blackfin/include/asm/gpio.h
@@ -7,6 +7,8 @@
#ifndef __ARCH_BLACKFIN_GPIO_H__
#define __ARCH_BLACKFIN_GPIO_H__
+#include <asm-generic/gpio.h>
+
#define gpio_bank(x) ((x) >> 4)
#define gpio_bit(x) (1<<((x) & 0xF))
#define gpio_sub_n(x) ((x) & 0xF)
@@ -65,10 +67,11 @@
#define PERIPHERAL_USAGE 1
#define GPIO_USAGE 0
+#define MAX_GPIOS MAX_BLACKFIN_GPIOS
#ifndef __ASSEMBLY__
-#if !defined(CONFIG_BF54x) && !defined(CONFIG_BF60x)
+#ifdef CONFIG_ADI_GPIO1
void set_gpio_dir(unsigned, unsigned short);
void set_gpio_inen(unsigned, unsigned short);
void set_gpio_polar(unsigned, unsigned short);
@@ -140,61 +143,16 @@
};
#endif
-#ifdef CONFIG_BFIN_GPIO_TRACK
-void bfin_gpio_labels(void);
-void bfin_gpio_free(unsigned gpio);
-#else
-#define bfin_gpio_labels()
-#define bfin_gpio_free(gpio)
-#define bfin_gpio_request(gpio, label) bfin_gpio_request(gpio)
-#define bfin_special_gpio_request(gpio, label) bfin_special_gpio_request(gpio)
+#ifdef ADI_SPECIAL_GPIO_BANKS
+void special_gpio_free(unsigned gpio);
+int special_gpio_request(unsigned gpio, const char *label);
#endif
-#ifdef BFIN_SPECIAL_GPIO_BANKS
-void bfin_special_gpio_free(unsigned gpio);
-int bfin_special_gpio_request(unsigned gpio, const char *label);
-#endif
-
-int bfin_gpio_request(unsigned gpio, const char *label);
-int bfin_gpio_direction_input(unsigned gpio);
-int bfin_gpio_direction_output(unsigned gpio, int value);
-int bfin_gpio_get_value(unsigned gpio);
-void bfin_gpio_set_value(unsigned gpio, int value);
-void bfin_gpio_toggle_value(unsigned gpio);
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
- return bfin_gpio_request(gpio, label);
-}
-
-static inline void gpio_free(unsigned gpio)
-{
- return bfin_gpio_free(gpio);
-}
-
-static inline int gpio_direction_input(unsigned gpio)
-{
- return bfin_gpio_direction_input(gpio);
-}
-
-static inline int gpio_direction_output(unsigned gpio, int value)
-{
- return bfin_gpio_direction_output(gpio, value);
-}
-
-static inline int gpio_get_value(unsigned gpio)
-{
- return bfin_gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
- return bfin_gpio_set_value(gpio, value);
-}
+void gpio_labels(void);
static inline int gpio_is_valid(int number)
{
- return number >= 0 && number < MAX_BLACKFIN_GPIOS;
+ return number >= 0 && number < MAX_GPIOS;
}
#include <linux/ctype.h>
@@ -248,7 +206,7 @@
}
#define name_to_gpio(n) name_to_gpio(n)
-#define gpio_status() bfin_gpio_labels()
+#define gpio_status() gpio_labels()
#endif /* __ASSEMBLY__ */
diff --git a/arch/blackfin/include/asm/mach-bf561/BF561_def.h b/arch/blackfin/include/asm/mach-bf561/BF561_def.h
index a7ff5a3..8fd552f 100644
--- a/arch/blackfin/include/asm/mach-bf561/BF561_def.h
+++ b/arch/blackfin/include/asm/mach-bf561/BF561_def.h
@@ -714,4 +714,6 @@
#define L1_INST_SRAM_SIZE (0xFFA03FFF - 0xFFA00000 + 1)
#define L1_INST_SRAM_END (L1_INST_SRAM + L1_INST_SRAM_SIZE)
+#define COREB_L1_CODE_START 0xFF600000
+
#endif /* __BFIN_DEF_ADSP_BF561_proc__ */
diff --git a/arch/blackfin/include/asm/mach-bf609/BF609_def.h b/arch/blackfin/include/asm/mach-bf609/BF609_def.h
index 8c1dcd0..02b81d3 100644
--- a/arch/blackfin/include/asm/mach-bf609/BF609_def.h
+++ b/arch/blackfin/include/asm/mach-bf609/BF609_def.h
@@ -128,6 +128,9 @@
#define EMAC0_MACCFG 0xFFC20000 /* EMAC0 MAC Configuration Register */
#define EMAC1_MACCFG 0xFFC22000 /* EMAC1 MAC Configuration Register */
+#define SPI0_REGBASE 0xFFC40400 /* SPI0 Base Address */
+#define SPI1_REGBASE 0xFFC40500 /* SPI1 Base Address */
+
#define DMA10_DSCPTR_NXT 0xFFC05000 /* DMA10 Pointer to Next Initial Desc */
#define DMA10_ADDRSTART 0xFFC05004 /* DMA10 Start Address of Current Buf */
#define DMA10_CFG 0xFFC05008 /* DMA10 Configuration Register */
@@ -244,4 +247,6 @@
#define L1_INST_SRAM_SIZE 0x8000
#define L1_INST_SRAM_END (L1_INST_SRAM + L1_INST_SRAM_SIZE)
+#define COREB_L1_CODE_START 0xFF600000
+
#endif /* __BFIN_DEF_ADSP_BF609_proc__ */
diff --git a/arch/blackfin/include/asm/portmux.h b/arch/blackfin/include/asm/portmux.h
index 300ef44..003694b 100644
--- a/arch/blackfin/include/asm/portmux.h
+++ b/arch/blackfin/include/asm/portmux.h
@@ -17,11 +17,6 @@
#define P_MAYSHARE 0x2000
#define P_DONTCARE 0x1000
-#ifndef CONFIG_BFIN_GPIO_TRACK
-#define peripheral_request(per, label) peripheral_request(per)
-#define peripheral_request_list(per, label) peripheral_request_list(per)
-#endif
-
#ifndef __ASSEMBLY__
int peripheral_request(unsigned short per, const char *label);
diff --git a/arch/blackfin/cpu/serial.h b/arch/blackfin/include/asm/serial.h
similarity index 82%
rename from arch/blackfin/cpu/serial.h
rename to arch/blackfin/include/asm/serial.h
index 9200339..87a337d 100644
--- a/arch/blackfin/cpu/serial.h
+++ b/arch/blackfin/include/asm/serial.h
@@ -78,19 +78,31 @@
#else
.macro serial_early_init
-#ifdef CONFIG_DEBUG_EARLY_SERIAL
- call _serial_initialize;
+#if defined(CONFIG_DEBUG_EARLY_SERIAL) && !defined(CONFIG_UART_MEM)
+ call __serial_early_init;
#endif
.endm
.macro serial_early_set_baud
-#ifdef CONFIG_DEBUG_EARLY_SERIAL
+#if defined(CONFIG_DEBUG_EARLY_SERIAL) && !defined(CONFIG_UART_MEM)
R0.L = LO(CONFIG_BAUDRATE);
R0.H = HI(CONFIG_BAUDRATE);
- call _serial_set_baud;
+ call __serial_early_set_baud;
#endif
.endm
+#if CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS
+#define update_serial_early_string_addr \
+ R1.L = _start; \
+ R1.H = _start; \
+ R0 = R0 - R1; \
+ R1.L = 0; \
+ R1.H = 0x2000; \
+ R0 = R0 + R1;
+#else
+#define update_serial_early_string_addr
+#endif
+
/* Since we embed the string right into our .text section, we need
* to find its address. We do this by getting our PC and adding 2
* bytes (which is the length of the jump instruction). Then we
@@ -108,7 +120,8 @@
.previous; \
R0.L = 7b; \
R0.H = 7b; \
- call _serial_puts;
+ update_serial_early_string_addr \
+ call _uart_early_puts;
#else
# define serial_early_puts(str)
#endif
diff --git a/arch/blackfin/cpu/serial1.h b/arch/blackfin/include/asm/serial1.h
similarity index 94%
rename from arch/blackfin/cpu/serial1.h
rename to arch/blackfin/include/asm/serial1.h
index a20175b..467d381 100644
--- a/arch/blackfin/cpu/serial1.h
+++ b/arch/blackfin/include/asm/serial1.h
@@ -15,6 +15,8 @@
#ifndef __ASSEMBLY__
+#include <asm/clock.h>
+
#define MMR_UART(n) _PASTE_UART(n, UART, DLL)
#ifdef UART_DLL
# define UART0_DLL UART_DLL
@@ -230,19 +232,6 @@
}
__attribute__((always_inline))
-static inline uint32_t uart_sclk(void)
-{
-#if defined(BFIN_IN_INITCODE) || defined(CONFIG_DEBUG_EARLY_SERIAL)
- /* We cannot use get_sclk() early on as it uses
- * caches in external memory
- */
- return CONFIG_CLKIN_HZ * CONFIG_VCO_MULT / CONFIG_SCLK_DIV;
-#else
- return get_sclk();
-#endif
-}
-
-__attribute__((always_inline))
static inline int uart_init(uint32_t uart_base)
{
/* always enable UART -- avoids anomalies 05000309 and 05000350 */
@@ -275,21 +264,8 @@
}
__attribute__((always_inline))
-static inline int serial_early_enabled(uint32_t uart_base)
+static inline void serial_set_divisor(uint32_t uart_base, uint16_t divisor)
{
- return bfin_read(&pUART->gctl) & UCEN;
-}
-
-__attribute__((always_inline))
-static inline void serial_early_set_baud(uint32_t uart_base, uint32_t baud)
-{
- /* Translate from baud into divisor in terms of SCLK. The
- * weird multiplication is to make sure we over sample just
- * a little rather than under sample the incoming signals.
- */
- uint16_t divisor = (uart_sclk() + (baud * 8)) / (baud * 16) -
- ANOMALY_05000230;
-
/* Set DLAB in LCR to Access DLL and DLH */
ACCESS_LATCH();
SSYNC();
@@ -305,6 +281,24 @@
}
__attribute__((always_inline))
+static inline void serial_early_set_baud(uint32_t uart_base, uint32_t baud)
+{
+ /* Translate from baud into divisor in terms of SCLK. The
+ * weird multiplication is to make sure we over sample just
+ * a little rather than under sample the incoming signals.
+ */
+#if CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS
+ uint16_t divisor = (early_get_uart_clk() + baud * 8) / (baud * 16)
+ - ANOMALY_05000230;
+#else
+ uint16_t divisor = early_division(early_get_uart_clk() + (baud * 8),
+ baud * 16) - ANOMALY_05000230;
+#endif
+
+ serial_set_divisor(uart_base, divisor);
+}
+
+__attribute__((always_inline))
static inline void serial_early_put_div(uint16_t divisor)
{
uint32_t uart_base = UART_BASE;
diff --git a/arch/blackfin/cpu/serial4.h b/arch/blackfin/include/asm/serial4.h
similarity index 86%
rename from arch/blackfin/cpu/serial4.h
rename to arch/blackfin/include/asm/serial4.h
index 887845c..6548396 100644
--- a/arch/blackfin/cpu/serial4.h
+++ b/arch/blackfin/include/asm/serial4.h
@@ -15,6 +15,8 @@
#ifndef __ASSEMBLY__
+#include <asm/clock.h>
+
#define MMR_UART(n) _PASTE_UART(n, UART, REVID)
#define UART_BASE MMR_UART(CONFIG_UART_CONSOLE)
@@ -84,20 +86,6 @@
}
__attribute__((always_inline))
-static inline uint32_t uart_sclk(void)
-{
-#if defined(BFIN_IN_INITCODE) || defined(CONFIG_DEBUG_EARLY_SERIAL)
- /* We cannot use get_sclk() early on as it uses caches in
- * external memory
- */
- return CONFIG_CLKIN_HZ * CONFIG_VCO_MULT / CONFIG_SCLK_DIV /
- CONFIG_SCLK0_DIV;
-#else
- return get_sclk0();
-#endif
-}
-
-__attribute__((always_inline))
static inline int uart_init(uint32_t uart_base)
{
/* always enable UART to 8-bit mode */
@@ -127,19 +115,20 @@
}
__attribute__((always_inline))
-static inline int serial_early_enabled(uint32_t uart_base)
+static inline void serial_set_divisor(uint32_t uart_base, uint16_t divisor)
{
- return bfin_read(&pUART->control) & UEN;
+ /* Program the divisor to get the baud rate we want */
+ bfin_write(&pUART->clock, divisor);
+ SSYNC();
}
__attribute__((always_inline))
static inline void serial_early_set_baud(uint32_t uart_base, uint32_t baud)
{
- uint32_t divisor = uart_sclk() / (baud * 16);
+ uint16_t divisor = early_division(early_get_uart_clk(), baud * 16);
/* Program the divisor to get the baud rate we want */
- bfin_write(&pUART->clock, divisor);
- SSYNC();
+ serial_set_divisor(uart_base, divisor);
}
__attribute__((always_inline))
diff --git a/arch/blackfin/include/asm/soft_switch.h b/arch/blackfin/include/asm/soft_switch.h
new file mode 100644
index 0000000..ff8e44d
--- /dev/null
+++ b/arch/blackfin/include/asm/soft_switch.h
@@ -0,0 +1,18 @@
+/*
+ * U-boot - main board file
+ *
+ * Copyright (c) 2008-2012 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __SOFT_SWITCH_H__
+#define __SOFT_SWITCH_H__
+
+#define IO_PORT_A 0
+#define IO_PORT_B 1
+#define IO_PORT_INPUT 0
+#define IO_PORT_OUTPUT 1
+
+int config_switch_bit(int num, int port, int bit, int dir, uchar value);
+#endif
diff --git a/arch/blackfin/lib/board.c b/arch/blackfin/lib/board.c
index ccea3b9..f1d5547 100644
--- a/arch/blackfin/lib/board.c
+++ b/arch/blackfin/lib/board.c
@@ -231,6 +231,8 @@
bd->bi_sclk = get_sclk();
bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
bd->bi_memsize = CONFIG_SYS_MAX_RAM_SIZE;
+ bd->bi_baudrate = (gd->baudrate > 0)
+ ? simple_strtoul(gd->baudrate, NULL, 10) : CONFIG_BAUDRATE;
return 0;
}
@@ -277,9 +279,9 @@
dcache_enable();
#endif
-#ifdef CONFIG_WATCHDOG
+#ifdef CONFIG_HW_WATCHDOG
serial_early_puts("Setting up external watchdog\n");
- watchdog_init();
+ hw_watchdog_init();
#endif
#ifdef DEBUG
diff --git a/arch/blackfin/lib/clocks.c b/arch/blackfin/lib/clocks.c
index d852f5e..97795e1 100644
--- a/arch/blackfin/lib/clocks.c
+++ b/arch/blackfin/lib/clocks.c
@@ -7,17 +7,7 @@
*/
#include <common.h>
-#include <asm/blackfin.h>
-
-#ifdef PLL_CTL
-# include <asm/mach-common/bits/pll.h>
-# define pll_is_bypassed() (bfin_read_PLL_STAT() & DF)
-#else
-# include <asm/mach-common/bits/cgu.h>
-# define pll_is_bypassed() (bfin_read_CGU_STAT() & PLLBP)
-# define bfin_read_PLL_CTL() bfin_read_CGU_CTL()
-# define bfin_read_PLL_DIV() bfin_read_CGU_DIV()
-#endif
+#include <asm/clock.h>
/* Get the voltage input multiplier */
u_long get_vco(void)
diff --git a/arch/blackfin/lib/string.c b/arch/blackfin/lib/string.c
index 44d8c6d..5b7ac0b 100644
--- a/arch/blackfin/lib/string.c
+++ b/arch/blackfin/lib/string.c
@@ -128,10 +128,12 @@
unsigned long limit;
#ifdef MSIZE
- limit = 6;
+ /* The max memory DMA memory transfer size is 32 bytes. */
+ limit = 5;
*dshift = MSIZE_P;
#else
- limit = 3;
+ /* The max memory DMA memory transfer size is 4 bytes. */
+ limit = 2;
*dshift = WDSIZE_P;
#endif
@@ -170,7 +172,8 @@
mod = 1 << bpos;
#ifdef PSIZE
- dsize |= min(3, bpos) << PSIZE_P;
+ /* The max memory DMA peripheral transfer size is 4 bytes. */
+ dsize |= min(2, bpos) << PSIZE_P;
#endif
/* Copy sram functions from sdram to sram */
diff --git a/arch/m68k/lib/bootm.c b/arch/m68k/lib/bootm.c
index d506d0c..56b6512 100644
--- a/arch/m68k/lib/bootm.c
+++ b/arch/m68k/lib/bootm.c
@@ -78,13 +78,6 @@
if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
return 1;
- /* allocate space and init command line */
- ret = boot_get_cmdline (lmb, &cmd_start, &cmd_end);
- if (ret) {
- puts("ERROR with allocation of cmdline\n");
- goto error;
- }
-
/* allocate space for kernel copy of board info */
ret = boot_get_kbd (lmb, &kbd);
if (ret) {
@@ -93,14 +86,12 @@
}
set_clocks_in_mhz(kbd);
- kernel = (void (*)(bd_t *, ulong, ulong, ulong, ulong))images->ep;
-
- rd_len = images->rd_end - images->rd_start;
- ret = boot_ramdisk_high (lmb, images->rd_start, rd_len,
- &initrd_start, &initrd_end);
+ ret = image_setup_linux(images);
if (ret)
goto error;
+ kernel = (void (*)(bd_t *, ulong, ulong, ulong, ulong))images->ep;
+
debug("## Transferring control to Linux (at address %08lx) ...\n",
(ulong) kernel);
diff --git a/arch/microblaze/include/asm/gpio.h b/arch/microblaze/include/asm/gpio.h
index 883f4d4..f5cad56 100644
--- a/arch/microblaze/include/asm/gpio.h
+++ b/arch/microblaze/include/asm/gpio.h
@@ -1,41 +1,15 @@
#ifndef _ASM_MICROBLAZE_GPIO_H_
#define _ASM_MICROBLAZE_GPIO_H_
-#include <asm/io.h>
+#include <asm-generic/gpio.h>
-static inline int gpio_request(unsigned gpio, const char *label)
-{
- return 0;
-}
+/* Allocation functions */
+extern int gpio_alloc_dual(u32 baseaddr, const char *name, u32 gpio_no0,
+ u32 gpio_no1);
+extern int gpio_alloc(u32 baseaddr, const char *name, u32 gpio_no);
-static inline int gpio_free(unsigned gpio)
-{
- return 0;
-}
+#define gpio_status() gpio_info()
+extern void gpio_info(void);
-static inline int gpio_direction_input(unsigned gpio)
-{
- return 0;
-}
-
-static inline int gpio_direction_output(unsigned gpio, int value)
-{
- return 0;
-}
-
-static inline int gpio_get_value(unsigned gpio)
-{
- return 0;
-}
-
-static inline int gpio_set_value(unsigned gpio, int value)
-{
- return 0;
-}
-
-static inline int gpio_is_valid(int number)
-{
- return 0;
-}
#endif
diff --git a/arch/microblaze/lib/bootm.c b/arch/microblaze/lib/bootm.c
index 66d21f4..3842709 100644
--- a/arch/microblaze/lib/bootm.c
+++ b/arch/microblaze/lib/bootm.c
@@ -32,11 +32,12 @@
DECLARE_GLOBAL_DATA_PTR;
-int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *images)
+int do_bootm_linux(int flag, int argc, char * const argv[],
+ bootm_headers_t *images)
{
/* First parameter is mapped to $r5 for kernel boot args */
- void (*theKernel) (char *, ulong, ulong);
- char *commandline = getenv ("bootargs");
+ void (*thekernel) (char *, ulong, ulong);
+ char *commandline = getenv("bootargs");
ulong rd_data_start, rd_data_end;
if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
@@ -51,10 +52,10 @@
of_flat_tree = images->ft_addr;
#endif
- theKernel = (void (*)(char *, ulong, ulong))images->ep;
+ thekernel = (void (*)(char *, ulong, ulong))images->ep;
/* find ramdisk */
- ret = boot_get_ramdisk (argc, argv, images, IH_ARCH_MICROBLAZE,
+ ret = boot_get_ramdisk(argc, argv, images, IH_ARCH_MICROBLAZE,
&rd_data_start, &rd_data_end);
if (ret)
return 1;
@@ -63,10 +64,19 @@
if (!of_flat_tree && argc > 3)
of_flat_tree = (char *)simple_strtoul(argv[3], NULL, 16);
+
+ /* fixup the initrd now that we know where it should be */
+ if (images->rd_start && images->rd_end && of_flat_tree)
+ ret = fdt_initrd(of_flat_tree, images->rd_start,
+ images->rd_end, 1);
+ if (ret)
+ return 1;
+
#ifdef DEBUG
- printf ("## Transferring control to Linux (at address 0x%08lx) " \
- "ramdisk 0x%08lx, FDT 0x%08lx...\n",
- (ulong) theKernel, rd_data_start, (ulong) of_flat_tree);
+ printf("## Transferring control to Linux (at address 0x%08lx) ",
+ (ulong)thekernel);
+ printf("ramdisk 0x%08lx, FDT 0x%08lx...\n",
+ rd_data_start, (ulong) of_flat_tree);
#endif
#ifdef XILINX_USE_DCACHE
@@ -78,7 +88,7 @@
* r6: pointer to ramdisk
* r7: pointer to the fdt, followed by the board info data
*/
- theKernel (commandline, rd_data_start, (ulong) of_flat_tree);
+ thekernel(commandline, rd_data_start, (ulong)of_flat_tree);
/* does not return */
return 1;
diff --git a/arch/nds32/include/asm/u-boot-nds32.h b/arch/nds32/include/asm/u-boot-nds32.h
index f3c7b27..d22eb5b 100644
--- a/arch/nds32/include/asm/u-boot-nds32.h
+++ b/arch/nds32/include/asm/u-boot-nds32.h
@@ -30,11 +30,6 @@
#define _U_BOOT_NDS32_H_ 1
/* for the following variables, see start.S */
-extern char __bss_start[]; /* BSS start relative to _start */
-extern ulong __bss_end; /* BSS end relative to _start */
-extern char _end[]; /* end of image relative to _start */
-extern void _start(void); /* start of image relative to _start */
-extern ulong _TEXT_BASE; /* code start */
extern ulong IRQ_STACK_START; /* top of IRQ stack */
extern ulong FIQ_STACK_START; /* top of FIQ stack */
diff --git a/arch/nds32/lib/board.c b/arch/nds32/lib/board.c
index 57af1be..1157d8c 100644
--- a/arch/nds32/lib/board.c
+++ b/arch/nds32/lib/board.c
@@ -36,6 +36,7 @@
#include <nand.h>
#include <onenand_uboot.h>
#include <mmc.h>
+#include <asm/sections.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -300,7 +301,7 @@
gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */
- monitor_flash_len = &_end - &_start;
+ monitor_flash_len = (ulong)&_end - (ulong)&_start;
debug("monitor flash len: %08lX\n", monitor_flash_len);
board_init(); /* Setup chipselects */
diff --git a/arch/openrisc/config.mk b/arch/openrisc/config.mk
index 521e73a..01c0f77 100644
--- a/arch/openrisc/config.mk
+++ b/arch/openrisc/config.mk
@@ -25,3 +25,5 @@
PLATFORM_CPPFLAGS += -DCONFIG_OPENRISC -D__OR1K__ -ffixed-r10
CONFIG_STANDALONE_LOAD_ADDR ?= 0x40000
+
+LDSCRIPT ?= $(SRCTREE)/$(CPUDIR)/u-boot.lds
diff --git a/board/openrisc/openrisc-generic/u-boot.lds b/arch/openrisc/cpu/u-boot.lds
similarity index 98%
rename from board/openrisc/openrisc-generic/u-boot.lds
rename to arch/openrisc/cpu/u-boot.lds
index 9024f30..d9bb7b7 100644
--- a/board/openrisc/openrisc-generic/u-boot.lds
+++ b/arch/openrisc/cpu/u-boot.lds
@@ -30,7 +30,7 @@
. = ALIGN(4);
.u_boot_list : {
KEEP(*(SORT(.u_boot_list*)));
- }
+ } > ram
.rodata : {
*(.rodata);
diff --git a/arch/powerpc/cpu/mpc8220/Makefile b/arch/powerpc/cpu/mpc8220/Makefile
deleted file mode 100644
index b8529ef..0000000
--- a/arch/powerpc/cpu/mpc8220/Makefile
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(CPU).o
-
-START = start.o
-SOBJS = io.o fec_dma_tasks.o
-COBJS = cpu.o cpu_init.o dramSetup.o fec.o i2c.o \
- interrupts.o loadtask.o speed.o \
- traps.o uart.o pci.o
-
-SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-START := $(addprefix $(obj),$(START))
-
-all: $(obj).depend $(START) $(LIB)
-
-$(LIB): $(OBJS)
- $(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/arch/powerpc/cpu/mpc8220/config.mk b/arch/powerpc/cpu/mpc8220/config.mk
deleted file mode 100644
index 2c638b5..0000000
--- a/arch/powerpc/cpu/mpc8220/config.mk
+++ /dev/null
@@ -1,27 +0,0 @@
-#
-# (C) Copyright 2003-2010
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-PLATFORM_RELFLAGS += -meabi
-
-PLATFORM_CPPFLAGS += -DCONFIG_MPC8220 -ffixed-r2 \
- -mstring -mcpu=603e -mmultiple
diff --git a/arch/powerpc/cpu/mpc8220/cpu.c b/arch/powerpc/cpu/mpc8220/cpu.c
deleted file mode 100644
index 64e0526..0000000
--- a/arch/powerpc/cpu/mpc8220/cpu.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * (C) Copyright 2000-2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * CPU specific code for the MPC8220 CPUs
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <mpc8220.h>
-#include <netdev.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int checkcpu (void)
-{
- ulong clock = gd->cpu_clk;
- char buf[32];
-
- puts ("CPU: ");
-
- printf (CPU_ID_STR);
-
- printf (" (JTAG ID %08lx)", *(vu_long *) (CONFIG_SYS_MBAR + 0x50));
-
- printf (" at %s MHz\n", strmhz (buf, clock));
-
- return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-
-int do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
-{
- volatile gptmr8220_t *gptmr = (volatile gptmr8220_t *) MMAP_GPTMR;
- ulong msr;
-
- /* Interrupts and MMU off */
- __asm__ __volatile__ ("mfmsr %0":"=r" (msr):);
-
- msr &= ~(MSR_ME | MSR_EE | MSR_IR | MSR_DR);
- __asm__ __volatile__ ("mtmsr %0"::"r" (msr));
-
- /* Charge the watchdog timer */
- gptmr->Prescl = 10;
- gptmr->Count = 1;
-
- gptmr->Mode = GPT_TMS_SGPIO;
-
- gptmr->Control = GPT_CTRL_WDEN | GPT_CTRL_CE;
-
- return 1;
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Get timebase clock frequency (like cpu_clk in Hz)
- *
- */
-unsigned long get_tbclk (void)
-{
- ulong tbclk;
-
- tbclk = (gd->bus_clk + 3L) / 4L;
-
- return (tbclk);
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Initializes on-chip ethernet controllers.
- * to override, implement board_eth_init()
- */
-int cpu_eth_init(bd_t *bis)
-{
-#if defined(CONFIG_MPC8220_FEC)
- mpc8220_fec_initialize(bis);
-#endif
- return 0;
-}
diff --git a/arch/powerpc/cpu/mpc8220/cpu_init.c b/arch/powerpc/cpu/mpc8220/cpu_init.c
deleted file mode 100644
index 8f52c7d..0000000
--- a/arch/powerpc/cpu/mpc8220/cpu_init.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * (C) Copyright 2000-2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8220.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Breath some life into the CPU...
- *
- * Set up the memory map,
- * initialize a bunch of registers.
- */
-void cpu_init_f (void)
-{
- volatile flexbus8220_t *flexbus = (volatile flexbus8220_t *) MMAP_FB;
- volatile pcfg8220_t *portcfg = (volatile pcfg8220_t *) MMAP_PCFG;
- volatile xlbarb8220_t *xlbarb = (volatile xlbarb8220_t *) MMAP_XLBARB;
-
- /* Pointer is writable since we allocated a register for it */
- gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
-
- /* Clear initial global data */
- memset ((void *) gd, 0, sizeof (gd_t));
-
- /* Clear all port configuration */
- portcfg->pcfg0 = 0;
- portcfg->pcfg1 = 0;
- portcfg->pcfg2 = 0;
- portcfg->pcfg3 = 0;
- portcfg->pcfg2 = CONFIG_SYS_GP1_PORT2_CONFIG;
- portcfg->pcfg3 = CONFIG_SYS_PCI_PORT3_CONFIG | CONFIG_SYS_GP2_PORT3_CONFIG;
-
- /*
- * Flexbus Controller: configure chip selects and enable them
- */
-#if defined (CONFIG_SYS_CS0_BASE)
- flexbus->csar0 = CONFIG_SYS_CS0_BASE;
-
-/* Sorcery-C can hang-up after CTRL reg initialization */
-#if defined (CONFIG_SYS_CS0_CTRL)
- flexbus->cscr0 = CONFIG_SYS_CS0_CTRL;
-#endif
- flexbus->csmr0 = ((CONFIG_SYS_CS0_MASK - 1) & 0xffff0000) | 1;
- __asm__ volatile ("sync");
-#endif
-#if defined (CONFIG_SYS_CS1_BASE)
- flexbus->csar1 = CONFIG_SYS_CS1_BASE;
- flexbus->cscr1 = CONFIG_SYS_CS1_CTRL;
- flexbus->csmr1 = ((CONFIG_SYS_CS1_MASK - 1) & 0xffff0000) | 1;
- __asm__ volatile ("sync");
-#endif
-#if defined (CONFIG_SYS_CS2_BASE)
- flexbus->csar2 = CONFIG_SYS_CS2_BASE;
- flexbus->cscr2 = CONFIG_SYS_CS2_CTRL;
- flexbus->csmr2 = ((CONFIG_SYS_CS2_MASK - 1) & 0xffff0000) | 1;
- portcfg->pcfg3 |= CONFIG_SYS_CS2_PORT3_CONFIG;
- __asm__ volatile ("sync");
-#endif
-#if defined (CONFIG_SYS_CS3_BASE)
- flexbus->csar3 = CONFIG_SYS_CS3_BASE;
- flexbus->cscr3 = CONFIG_SYS_CS3_CTRL;
- flexbus->csmr3 = ((CONFIG_SYS_CS3_MASK - 1) & 0xffff0000) | 1;
- portcfg->pcfg3 |= CONFIG_SYS_CS3_PORT3_CONFIG;
- __asm__ volatile ("sync");
-#endif
-#if defined (CONFIG_SYS_CS4_BASE)
- flexbus->csar4 = CONFIG_SYS_CS4_BASE;
- flexbus->cscr4 = CONFIG_SYS_CS4_CTRL;
- flexbus->csmr4 = ((CONFIG_SYS_CS4_MASK - 1) & 0xffff0000) | 1;
- portcfg->pcfg3 |= CONFIG_SYS_CS4_PORT3_CONFIG;
- __asm__ volatile ("sync");
-#endif
-#if defined (CONFIG_SYS_CS5_BASE)
- flexbus->csar5 = CONFIG_SYS_CS5_BASE;
- flexbus->cscr5 = CONFIG_SYS_CS5_CTRL;
- flexbus->csmr5 = ((CONFIG_SYS_CS5_MASK - 1) & 0xffff0000) | 1;
- portcfg->pcfg3 |= CONFIG_SYS_CS5_PORT3_CONFIG;
- __asm__ volatile ("sync");
-#endif
-
- /* This section of the code cannot place in cpu_init_r(),
- it will cause the system to hang */
- /* enable timebase */
- xlbarb->addrTenTimeOut = 0x1000;
- xlbarb->dataTenTimeOut = 0x1000;
- xlbarb->busActTimeOut = 0x2000;
-
- xlbarb->config = 0x00002000;
-
- /* Master Priority Enable */
- xlbarb->mastPriority = 0;
- xlbarb->mastPriEn = 0xff;
-}
-
-/*
- * initialize higher level parts of CPU like time base and timers
- */
-int cpu_init_r (void)
-{
- /* this may belongs to disable interrupt section */
- /* mask all interrupts */
- *(vu_long *) 0xf0000700 = 0xfffffc00;
- *(vu_long *) 0xf0000714 |= 0x0001ffff;
- *(vu_long *) 0xf0000710 &= ~0x00000f00;
-
- /* route critical ints to normal ints */
- *(vu_long *) 0xf0000710 |= 0x00000001;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_MPC8220_FEC)
- /* load FEC microcode */
- loadtask (0, 2);
-#endif
- return (0);
-}
diff --git a/arch/powerpc/cpu/mpc8220/dma.h b/arch/powerpc/cpu/mpc8220/dma.h
deleted file mode 100644
index d06ee63..0000000
--- a/arch/powerpc/cpu/mpc8220/dma.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * This file is based on code
- * (C) Copyright Motorola, Inc., 2000
- *
- * MPC8220 dma header file
- */
-
-#ifndef __MPC8220_DMA_H
-#define __MPC8220_DMA_H
-
-#include <common.h>
-#include <mpc8220.h>
-
-/* Task number assignment */
-#define FEC_RECV_TASK_NO 0
-#define FEC_XMIT_TASK_NO 1
-
-/*---------------------------------------------------------------------
- * Stuff for Ethernet Tx/Rx tasks
- *---------------------------------------------------------------------
- */
-
-/* Layout of Ethernet controller Parameter SRAM area:
- * ----------------------------------------------------------------
- * 0x00: TBD_BASE, base address of TX BD ring
- * 0x04: TBD_NEXT, address of next TX BD to be processed
- * 0x08: RBD_BASE, base address of RX BD ring
- * 0x0C: RBD_NEXT, address of next RX BD to be processed
- * ---------------------------------------------------------------
- * ALL PARAMETERS ARE ALL LONGWORDS (FOUR BYTES EACH).
- */
-
-/* base address of SRAM area to store parameters used by Ethernet tasks */
-#define FEC_PARAM_BASE (MMAP_SRAM + 0x5b00)
-
-/* base address of SRAM area for buffer descriptors */
-#define FEC_BD_BASE (MMAP_SRAM + 0x5b20)
-
-/*---------------------------------------------------------------------
- * common shortcuts used by driver C code
- *---------------------------------------------------------------------
- */
-
-/* Disable SmartDMA task */
-#define DMA_TASK_DISABLE(tasknum) \
-{ \
- volatile ushort *tcr = (ushort *)(MMAP_DMA + 0x0000001c + 2 * tasknum); \
- *tcr = (*tcr) & (~0x8000); \
-}
-
-/* Enable SmartDMA task */
-#define DMA_TASK_ENABLE(tasknum) \
-{ \
- volatile ushort *tcr = (ushort *) (MMAP_DMA + 0x0000001c + 2 * tasknum);\
- *tcr = (*tcr) | 0x8000; \
-}
-
-/* Clear interrupt pending bits */
-#define DMA_CLEAR_IEVENT(tasknum) \
-{ \
- struct mpc8220_dma *dma = (struct mpc8220_dma *)MMAP_DMA; \
- dma->IntPend = (1 << tasknum); \
-}
-
-#endif /* __MPC8220_DMA_H */
diff --git a/arch/powerpc/cpu/mpc8220/dramSetup.c b/arch/powerpc/cpu/mpc8220/dramSetup.c
deleted file mode 100644
index 52cf133..0000000
--- a/arch/powerpc/cpu/mpc8220/dramSetup.c
+++ /dev/null
@@ -1,752 +0,0 @@
-/*
- * (C) Copyright 2004, Freescale, Inc
- * TsiChung Liew, Tsi-Chung.Liew@freescale.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
-DESCRIPTION
-Read Dram spd and base on its information to calculate the memory size,
-characteristics to initialize the dram on MPC8220
-*/
-
-#include <common.h>
-#include <mpc8220.h>
-#include "i2cCore.h"
-#include "dramSetup.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define SPD_SIZE CONFIG_SYS_SDRAM_SPD_SIZE
-#define DRAM_SPD (CONFIG_SYS_SDRAM_SPD_I2C_ADDR)<<1 /* on Board SPD eeprom */
-#define TOTAL_BANK CONFIG_SYS_SDRAM_TOTAL_BANKS
-
-int spd_status (volatile i2c8220_t * pi2c, u8 sta_bit, u8 truefalse)
-{
- int i;
-
- for (i = 0; i < I2C_POLL_COUNT; i++) {
- if ((pi2c->sr & sta_bit) == (truefalse ? sta_bit : 0))
- return (OK);
- }
-
- return (ERROR);
-}
-
-int spd_clear (volatile i2c8220_t * pi2c)
-{
- pi2c->adr = 0;
- pi2c->fdr = 0;
- pi2c->cr = 0;
- pi2c->sr = 0;
-
- return (OK);
-}
-
-int spd_stop (volatile i2c8220_t * pi2c)
-{
- pi2c->cr &= ~I2C_CTL_STA; /* Generate stop signal */
- if (spd_status (pi2c, I2C_STA_BB, 0) != OK)
- return ERROR;
-
- return (OK);
-}
-
-int spd_readbyte (volatile i2c8220_t * pi2c, u8 * readb, int *index)
-{
- pi2c->sr &= ~I2C_STA_IF; /* Clear Interrupt Bit */
- *readb = pi2c->dr; /* Read a byte */
-
- /*
- Set I2C_CTRL_TXAK will cause Transfer pending and
- set I2C_CTRL_STA will cause Interrupt pending
- */
- if (*index != 2) {
- if (spd_status (pi2c, I2C_STA_CF, 1) != OK) /* Transfer not complete? */
- return ERROR;
- }
-
- if (*index != 1) {
- if (spd_status (pi2c, I2C_STA_IF, 1) != OK)
- return ERROR;
- }
-
- return (OK);
-}
-
-int readSpdData (u8 * spdData)
-{
- volatile i2c8220_t *pi2cReg;
- volatile pcfg8220_t *pcfg;
- u8 slvAdr = DRAM_SPD;
- u8 Tmp;
- int Length = SPD_SIZE;
- int i = 0;
-
- /* Enable Port Configuration for SDA and SDL signals */
- pcfg = (volatile pcfg8220_t *) (MMAP_PCFG);
- __asm__ ("sync");
- pcfg->pcfg3 &= ~CONFIG_SYS_I2C_PORT3_CONFIG;
- __asm__ ("sync");
-
- /* Points the structure to I2c mbar memory offset */
- pi2cReg = (volatile i2c8220_t *) (MMAP_I2C);
-
-
- /* Clear FDR, ADR, SR and CR reg */
- pi2cReg->adr = 0;
- pi2cReg->fdr = 0;
- pi2cReg->cr = 0;
- pi2cReg->sr = 0;
-
- /* Set for fix XLB Bus Frequency */
- switch (gd->bus_clk) {
- case 60000000:
- pi2cReg->fdr = 0x15;
- break;
- case 70000000:
- pi2cReg->fdr = 0x16;
- break;
- case 80000000:
- pi2cReg->fdr = 0x3a;
- break;
- case 90000000:
- pi2cReg->fdr = 0x17;
- break;
- case 100000000:
- pi2cReg->fdr = 0x3b;
- break;
- case 110000000:
- pi2cReg->fdr = 0x18;
- break;
- case 120000000:
- pi2cReg->fdr = 0x19;
- break;
- case 130000000:
- pi2cReg->fdr = 0x1a;
- break;
- }
-
- pi2cReg->adr = CONFIG_SYS_I2C_SLAVE<<1;
-
- pi2cReg->cr = I2C_CTL_EN; /* Set Enable */
-
- /*
- The I2C bus should be in Idle state. If the bus is busy,
- clear the STA bit in control register
- */
- if (spd_status (pi2cReg, I2C_STA_BB, 0) != OK) {
- if ((pi2cReg->cr & I2C_CTL_STA) == I2C_CTL_STA)
- pi2cReg->cr &= ~I2C_CTL_STA;
-
- /* Check again if it is still busy, return error if found */
- if (spd_status (pi2cReg, I2C_STA_BB, 1) == OK)
- return ERROR;
- }
-
- pi2cReg->cr |= I2C_CTL_TX; /* Enable the I2c for TX, Ack */
- pi2cReg->cr |= I2C_CTL_STA; /* Generate start signal */
-
- if (spd_status (pi2cReg, I2C_STA_BB, 1) != OK)
- return ERROR;
-
-
- /* Write slave address */
- pi2cReg->sr &= ~I2C_STA_IF; /* Clear Interrupt */
- pi2cReg->dr = slvAdr; /* Write a byte */
-
- if (spd_status (pi2cReg, I2C_STA_CF, 1) != OK) { /* Transfer not complete? */
- spd_stop (pi2cReg);
- return ERROR;
- }
-
- if (spd_status (pi2cReg, I2C_STA_IF, 1) != OK) {
- spd_stop (pi2cReg);
- return ERROR;
- }
-
-
- /* Issue the offset to start */
- pi2cReg->sr &= ~I2C_STA_IF; /* Clear Interrupt */
- pi2cReg->dr = 0; /* Write a byte */
-
- if (spd_status (pi2cReg, I2C_STA_CF, 1) != OK) { /* Transfer not complete? */
- spd_stop (pi2cReg);
- return ERROR;
- }
-
- if (spd_status (pi2cReg, I2C_STA_IF, 1) != OK) {
- spd_stop (pi2cReg);
- return ERROR;
- }
-
-
- /* Set repeat start */
- pi2cReg->cr |= I2C_CTL_RSTA; /* Repeat Start */
-
- pi2cReg->sr &= ~I2C_STA_IF; /* Clear Interrupt */
- pi2cReg->dr = slvAdr | 1; /* Write a byte */
-
- if (spd_status (pi2cReg, I2C_STA_CF, 1) != OK) { /* Transfer not complete? */
- spd_stop (pi2cReg);
- return ERROR;
- }
-
- if (spd_status (pi2cReg, I2C_STA_IF, 1) != OK) {
- spd_stop (pi2cReg);
- return ERROR;
- }
-
- if (((pi2cReg->sr & 0x07) == 0x07) || (pi2cReg->sr & 0x01))
- return ERROR;
-
- pi2cReg->cr &= ~I2C_CTL_TX; /* Set receive mode */
-
- if (((pi2cReg->sr & 0x07) == 0x07) || (pi2cReg->sr & 0x01))
- return ERROR;
-
- /* Dummy Read */
- if (spd_readbyte (pi2cReg, &Tmp, &i) != OK) {
- spd_stop (pi2cReg);
- return ERROR;
- }
-
- i = 0;
- while (Length) {
- if (Length == 2)
- pi2cReg->cr |= I2C_CTL_TXAK;
-
- if (Length == 1)
- pi2cReg->cr &= ~I2C_CTL_STA;
-
- if (spd_readbyte (pi2cReg, spdData, &Length) != OK) {
- return spd_stop (pi2cReg);
- }
- i++;
- Length--;
- spdData++;
- }
-
- /* Stop the service */
- spd_stop (pi2cReg);
-
- return OK;
-}
-
-int getBankInfo (int bank, draminfo_t * pBank)
-{
- int status;
- int checksum;
- int count;
- u8 spdData[SPD_SIZE];
-
-
- if (bank > 2 || pBank == 0) {
- /* illegal values */
- return (-42);
- }
-
- status = readSpdData (&spdData[0]);
- if (status < 0)
- return (-1);
-
- /* check the checksum */
- for (count = 0, checksum = 0; count < LOC_CHECKSUM; count++)
- checksum += spdData[count];
-
- checksum = checksum - ((checksum / 256) * 256);
-
- if (checksum != spdData[LOC_CHECKSUM])
- return (-2);
-
- /* Get the memory type */
- if (!
- ((spdData[LOC_TYPE] == TYPE_DDR)
- || (spdData[LOC_TYPE] == TYPE_SDR)))
- /* not one of the types we support */
- return (-3);
-
- pBank->type = spdData[LOC_TYPE];
-
- /* Set logical banks */
- pBank->banks = spdData[LOC_LOGICAL_BANKS];
-
- /* Check that we have enough physical banks to cover the bank we are
- * figuring out. Odd-numbered banks correspond to the second bank
- * on the device.
- */
- if (bank & 1) {
- /* Second bank of a "device" */
- if (spdData[LOC_PHYS_BANKS] < 2)
- /* this bank doesn't exist on the "device" */
- return (-4);
-
- if (spdData[LOC_ROWS] & 0xf0)
- /* Two asymmetric banks */
- pBank->rows = spdData[LOC_ROWS] >> 4;
- else
- pBank->rows = spdData[LOC_ROWS];
-
- if (spdData[LOC_COLS] & 0xf0)
- /* Two asymmetric banks */
- pBank->cols = spdData[LOC_COLS] >> 4;
- else
- pBank->cols = spdData[LOC_COLS];
- } else {
- /* First bank of a "device" */
- pBank->rows = spdData[LOC_ROWS];
- pBank->cols = spdData[LOC_COLS];
- }
-
- pBank->width = spdData[LOC_WIDTH_HIGH] << 8 | spdData[LOC_WIDTH_LOW];
- pBank->bursts = spdData[LOC_BURSTS];
- pBank->CAS = spdData[LOC_CAS];
- pBank->CS = spdData[LOC_CS];
- pBank->WE = spdData[LOC_WE];
- pBank->Trp = spdData[LOC_Trp];
- pBank->Trcd = spdData[LOC_Trcd];
- pBank->buffered = spdData[LOC_Buffered] & 1;
- pBank->refresh = spdData[LOC_REFRESH];
-
- return (0);
-}
-
-
-/* checkMuxSetting -- given a row/column device geometry, return a mask
- * of the valid DRAM controller addr_mux settings for
- * that geometry.
- *
- * Arguments: u8 rows: number of row addresses in this device
- * u8 columns: number of column addresses in this device
- *
- * Returns: a mask of the allowed addr_mux settings for this
- * geometry. Each bit in the mask represents a
- * possible addr_mux settings (for example, the
- * (1<<2) bit in the mask represents the 0b10 setting)/
- *
- */
-u8 checkMuxSetting (u8 rows, u8 columns)
-{
- muxdesc_t *pIdx, *pMux;
- u8 mask;
- int lrows, lcolumns;
- u32 mux[4] = { 0x00080c04, 0x01080d03, 0x02080e02, 0xffffffff };
-
- /* Setup MuxDescriptor in SRAM space */
- /* MUXDESC AddressRuns [] = {
- { 0, 8, 12, 4 }, / setting, columns, rows, extra columns /
- { 1, 8, 13, 3 }, / setting, columns, rows, extra columns /
- { 2, 8, 14, 2 }, / setting, columns, rows, extra columns /
- { 0xff } / list terminator /
- }; */
-
- pIdx = (muxdesc_t *) & mux[0];
-
- /* Check rows x columns against each possible address mux setting */
- for (pMux = pIdx, mask = 0;; pMux++) {
- lrows = rows;
- lcolumns = columns;
-
- if (pMux->MuxValue == 0xff)
- break; /* end of list */
-
- /* For a given mux setting, since we want all the memory in a
- * device to be contiguous, we want the device "use up" the
- * address lines such that there are no extra column or row
- * address lines on the device.
- */
-
- lcolumns -= pMux->Columns;
- if (lcolumns < 0)
- /* Not enough columns to get to the rows */
- continue;
-
- lrows -= pMux->Rows;
- if (lrows > 0)
- /* we have extra rows left -- can't do that! */
- continue;
-
- /* At this point, we either have to have used up all the
- * rows or we have to have no columns left.
- */
-
- if (lcolumns != 0 && lrows != 0)
- /* rows AND columns are left. Bad! */
- continue;
-
- lcolumns -= pMux->MoreColumns;
-
- if (lcolumns <= 0)
- mask |= (1 << pMux->MuxValue);
- }
-
- return (mask);
-}
-
-
-u32 dramSetup (void)
-{
- draminfo_t DramInfo[TOTAL_BANK];
- draminfo_t *pDramInfo;
- u32 size, temp, cfg_value, mode_value, refresh;
- u8 *ptr;
- u8 bursts, Trp, Trcd, type, buffered;
- u8 muxmask, rows, columns;
- int count, banknum;
- u32 *prefresh, *pIdx;
- u32 refrate[8] = { 15625, 3900, 7800, 31300,
- 62500, 125000, 0xffffffff, 0xffffffff
- };
- volatile sysconf8220_t *sysconf;
- volatile memctl8220_t *memctl;
-
- sysconf = (volatile sysconf8220_t *) MMAP_MBAR;
- memctl = (volatile memctl8220_t *) MMAP_MEMCTL;
-
- /* Set everything in the descriptions to zero */
- ptr = (u8 *) & DramInfo[0];
- for (count = 0; count < sizeof (DramInfo); count++)
- *ptr++ = 0;
-
- for (banknum = 0; banknum < TOTAL_BANK; banknum++)
- sysconf->cscfg[banknum];
-
- /* Descriptions of row/column address muxing for various
- * addr_mux settings.
- */
-
- pIdx = prefresh = (u32 *) & refrate[0];
-
- /* Get all the info for all three logical banks */
- bursts = 0xff;
- Trp = 0;
- Trcd = 0;
- type = 0;
- buffered = 0xff;
- refresh = 0xffffffff;
- muxmask = 0xff;
-
- /* Two bank, CS0 and CS1 */
- for (banknum = 0, pDramInfo = &DramInfo[0];
- banknum < TOTAL_BANK; banknum++, pDramInfo++) {
- pDramInfo->ordinal = banknum; /* initial sorting */
- if (getBankInfo (banknum, pDramInfo) < 0)
- continue;
-
- /* get cumulative parameters of all three banks */
- if (type && pDramInfo->type != type)
- return 0;
-
- type = pDramInfo->type;
- rows = pDramInfo->rows;
- columns = pDramInfo->cols;
-
- /* This chip only supports 13 DRAM memory lines, but some devices
- * have 14 rows. To deal with this, ignore the 14th address line
- * by limiting the number of rows (and columns) to 13. This will
- * mean that for 14-row devices we will only be able to use
- * half of the memory, but it's better than nothing.
- */
- if (rows > 13)
- rows = 13;
- if (columns > 13)
- columns = 13;
-
- pDramInfo->size =
- ((1 << (rows + columns)) * pDramInfo->width);
- pDramInfo->size *= pDramInfo->banks;
- pDramInfo->size >>= 3;
-
- /* figure out which addr_mux configurations will support this device */
- muxmask &= checkMuxSetting (rows, columns);
- if (muxmask == 0)
- return 0;
-
- buffered = pDramInfo->buffered;
- bursts &= pDramInfo->bursts; /* union of all bursts */
- if (pDramInfo->Trp > Trp) /* worst case (longest) Trp */
- Trp = pDramInfo->Trp;
-
- if (pDramInfo->Trcd > Trcd) /* worst case (longest) Trcd */
- Trcd = pDramInfo->Trcd;
-
- prefresh = pIdx;
- /* worst case (shortest) Refresh period */
- if (refresh > prefresh[pDramInfo->refresh & 7])
- refresh = prefresh[pDramInfo->refresh & 7];
-
- } /* for loop */
-
-
- /* We only allow a burst length of 8! */
- if (!(bursts & 8))
- bursts = 8;
-
- /* Sort the devices. In order to get each chip select region
- * aligned properly, put the biggest device at the lowest address.
- * A simple bubble sort will do the trick.
- */
- for (banknum = 0, pDramInfo = &DramInfo[0];
- banknum < TOTAL_BANK; banknum++, pDramInfo++) {
- int i;
-
- for (i = 0; i < TOTAL_BANK; i++) {
- if (pDramInfo->size < DramInfo[i].size &&
- pDramInfo->ordinal < DramInfo[i].ordinal) {
- /* If the current bank is smaller, but if the ordinal is also
- * smaller, swap the ordinals
- */
- u8 temp8;
-
- temp8 = DramInfo[i].ordinal;
- DramInfo[i].ordinal = pDramInfo->ordinal;
- pDramInfo->ordinal = temp8;
- }
- }
- }
-
-
- /* Now figure out the base address for each bank. While
- * we're at it, figure out how much memory there is.
- *
- */
- size = 0;
- for (banknum = 0; banknum < TOTAL_BANK; banknum++) {
- int i;
-
- for (i = 0; i < TOTAL_BANK; i++) {
- if (DramInfo[i].ordinal == banknum
- && DramInfo[i].size != 0) {
- DramInfo[i].base = size;
- size += DramInfo[i].size;
- }
- }
- }
-
- /* Set up the Drive Strength register */
- sysconf->sdramds = CONFIG_SYS_SDRAM_DRIVE_STRENGTH;
-
- /* ********************** Cfg 1 ************************* */
-
- /* Set the single read to read/write/precharge delay */
- cfg_value = CFG1_SRD2RWP ((type == TYPE_DDR) ? 7 : 0xb);
-
- /* Set the single write to read/write/precharge delay.
- * This may or may not be correct. The controller spec
- * says "tWR", but "tWR" does not appear in the SPD. It
- * always seems to be 15nsec for the class of device we're
- * using, which turns out to be 2 clock cycles at 133MHz,
- * so that's what we're going to use.
- *
- * HOWEVER, because of a bug in the controller, for DDR
- * we need to set this to be the same as the value
- * calculated for bwt2rwp.
- */
- cfg_value |= CFG1_SWT2RWP ((type == TYPE_DDR) ? 7 : 2);
-
- /* Set the Read CAS latency. We're going to use a CL of
- * 2.5 for DDR and 2 SDR.
- */
- cfg_value |= CFG1_RLATENCY ((type == TYPE_DDR) ? 7 : 2);
-
-
- /* Set the Active to Read/Write delay. This depends
- * on Trcd which is reported as nanoseconds times 4.
- * We want to calculate Trcd (in nanoseconds) times XLB clock (in Hz)
- * which gives us a dimensionless quantity. Play games with
- * the divisions so we don't run out of dynamic ranges.
- */
- /* account for megaherz and the times 4 */
- temp = (Trcd * (gd->bus_clk / 1000000)) / 4;
-
- /* account for nanoseconds and round up, with a minimum value of 2 */
- temp = ((temp + 999) / 1000) - 1;
- if (temp < 2)
- temp = 2;
-
- cfg_value |= CFG1_ACT2WR (temp);
-
- /* Set the precharge to active delay. This depends
- * on Trp which is reported as nanoseconds times 4.
- * We want to calculate Trp (in nanoseconds) times XLB clock (in Hz)
- * which gives us a dimensionless quantity. Play games with
- * the divisions so we don't run out of dynamic ranges.
- */
- /* account for megaherz and the times 4 */
- temp = (Trp * (gd->bus_clk / 1000000)) / 4;
-
- /* account for nanoseconds and round up, then subtract 1, with a
- * minumum value of 1 and a maximum value of 7.
- */
- temp = (((temp + 999) / 1000) - 1) & 7;
- if (temp < 1)
- temp = 1;
-
- cfg_value |= CFG1_PRE2ACT (temp);
-
- /* Set refresh to active delay. This depends
- * on Trfc which is not reported in the SPD.
- * We'll use a nominal value of 75nsec which is
- * what the controller spec uses.
- */
- temp = (75 * (gd->bus_clk / 1000000));
- /* account for nanoseconds and round up, then subtract 1 */
- cfg_value |= CFG1_REF2ACT (((temp + 999) / 1000) - 1);
-
- /* Set the write latency, using the values given in the controller spec */
- cfg_value |= CFG1_WLATENCY ((type == TYPE_DDR) ? 3 : 0);
- memctl->cfg1 = cfg_value; /* cfg 1 */
- asm volatile ("sync");
-
-
- /* ********************** Cfg 2 ************************* */
-
- /* Set the burst read to read/precharge delay */
- cfg_value = CFG2_BRD2RP ((type == TYPE_DDR) ? 5 : 8);
-
- /* Set the burst write to read/precharge delay. Semi-magic numbers
- * based on the controller spec recommendations, assuming tWR is
- * two clock cycles.
- */
- cfg_value |= CFG2_BWT2RWP ((type == TYPE_DDR) ? 7 : 10);
-
- /* Set the Burst read to write delay. Semi-magic numbers
- * based on the DRAM controller documentation.
- */
- cfg_value |= CFG2_BRD2WT ((type == TYPE_DDR) ? 7 : 0xb);
-
- /* Set the burst length -- must be 8!! Well, 7, actually, becuase
- * it's burst lenght minus 1.
- */
- cfg_value |= CFG2_BURSTLEN (7);
- memctl->cfg2 = cfg_value; /* cfg 2 */
- asm volatile ("sync");
-
-
- /* ********************** mode ************************* */
-
- /* Set enable bit, CKE high/low bits, and the DDR/SDR mode bit,
- * disable automatic refresh.
- */
- cfg_value = CTL_MODE_ENABLE | CTL_CKE_HIGH |
- ((type == TYPE_DDR) ? CTL_DDR_MODE : 0);
-
- /* Set the address mux based on whichever setting(s) is/are common
- * to all the devices we have. If there is more than one, choose
- * one arbitrarily.
- */
- if (muxmask & 0x4)
- cfg_value |= CTL_ADDRMUX (2);
- else if (muxmask & 0x2)
- cfg_value |= CTL_ADDRMUX (1);
- else
- cfg_value |= CTL_ADDRMUX (0);
-
- /* Set the refresh interval. */
- temp = ((refresh * (gd->bus_clk / 1000000)) / (1000 * 64)) - 1;
- cfg_value |= CTL_REFRESH_INTERVAL (temp);
-
- /* Set buffered/non-buffered memory */
- if (buffered)
- cfg_value |= CTL_BUFFERED;
-
- memctl->ctrl = cfg_value; /* ctrl */
- asm volatile ("sync");
-
- if (type == TYPE_DDR) {
- /* issue precharge all */
- temp = cfg_value | CTL_PRECHARGE_CMD;
- memctl->ctrl = temp; /* ctrl */
- asm volatile ("sync");
- }
-
-
- /* Set up mode value for CAS latency */
-#if (CONFIG_SYS_SDRAM_CAS_LATENCY==5) /* CL=2.5 */
- mode_value = (MODE_MODE | MODE_BURSTLEN (MODE_BURSTLEN_8) |
- MODE_BT_SEQUENTIAL | MODE_CL (MODE_CL_2p5) | MODE_CMD);
-#else
- mode_value = (MODE_MODE | MODE_BURSTLEN (MODE_BURSTLEN_8) |
- MODE_BT_SEQUENTIAL | MODE_CL (MODE_CL_2) | MODE_CMD);
-#endif
- asm volatile ("sync");
-
- /* Write Extended Mode - enable DLL */
- if (type == TYPE_DDR) {
- temp = MODE_EXTENDED | MODE_X_DLL_ENABLE |
- MODE_X_DS_NORMAL | MODE_CMD;
- memctl->mode = (temp >> 16); /* mode */
- asm volatile ("sync");
-
- /* Write Mode - reset DLL, set CAS latency */
- temp = mode_value | MODE_OPMODE (MODE_OPMODE_RESETDLL);
- memctl->mode = (temp >> 16); /* mode */
- asm volatile ("sync");
- }
-
- /* Program the chip selects. */
- for (banknum = 0; banknum < TOTAL_BANK; banknum++) {
- if (DramInfo[banknum].size != 0) {
- u32 mask;
- int i;
-
- for (i = 0, mask = 1; i < 32; mask <<= 1, i++) {
- if (DramInfo[banknum].size & mask)
- break;
- }
- temp = (DramInfo[banknum].base & 0xfff00000) | (i -
- 1);
-
- sysconf->cscfg[banknum] = temp;
- asm volatile ("sync");
- }
- }
-
- /* Wait for DLL lock */
- udelay (200);
-
- temp = cfg_value | CTL_PRECHARGE_CMD; /* issue precharge all */
- memctl->ctrl = temp; /* ctrl */
- asm volatile ("sync");
-
- temp = cfg_value | CTL_REFRESH_CMD; /* issue precharge all */
- memctl->ctrl = temp; /* ctrl */
- asm volatile ("sync");
-
- memctl->ctrl = temp; /* ctrl */
- asm volatile ("sync");
-
- /* Write Mode - DLL normal */
- temp = mode_value | MODE_OPMODE (MODE_OPMODE_NORMAL);
- memctl->mode = (temp >> 16); /* mode */
- asm volatile ("sync");
-
- /* Enable refresh, enable DQS's (if DDR), and lock the control register */
- cfg_value &= ~CTL_MODE_ENABLE; /* lock register */
- cfg_value |= CTL_REFRESH_ENABLE; /* enable refresh */
-
- if (type == TYPE_DDR)
- cfg_value |= CTL_DQSOEN (0xf); /* enable DQS's for DDR */
-
- memctl->ctrl = cfg_value; /* ctrl */
- asm volatile ("sync");
-
- return size;
-}
diff --git a/arch/powerpc/cpu/mpc8220/dramSetup.h b/arch/powerpc/cpu/mpc8220/dramSetup.h
deleted file mode 100644
index 3b64e08..0000000
--- a/arch/powerpc/cpu/mpc8220/dramSetup.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * dramSetup.h
- *
- * Prototypes, etc. for the Motorola MPC8220
- * embedded cpu chips
- *
- * 2004 (c) Freescale, Inc.
- * Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#ifndef __INCdramsetuph
-#define __INCdramsetuph
-#ifndef __ASSEMBLY__
-/* Where various things are in the SPD */
-#define LOC_TYPE 2
-#define LOC_CHECKSUM 63
-#define LOC_PHYS_BANKS 5
-#define LOC_LOGICAL_BANKS 17
-#define LOC_ROWS 3
-#define LOC_COLS 4
-#define LOC_WIDTH_HIGH 7
-#define LOC_WIDTH_LOW 6
-#define LOC_REFRESH 12
-#define LOC_BURSTS 16
-#define LOC_CAS 18
-#define LOC_CS 19
-#define LOC_WE 20
-#define LOC_Tcyc 9
-#define LOC_Tac 10
-#define LOC_Trp 27
-#define LOC_Trrd 28
-#define LOC_Trcd 29
-#define LOC_Tras 30
-#define LOC_Buffered 21
-/* Types of memory the SPD can tell us about.
- * We can actually only use SDRAM and DDR.
- */
-#define TYPE_DRAM 1 /* plain old dram */
-#define TYPE_EDO 2 /* EDO dram */
-#define TYPE_Nibble 3 /* serial nibble memory */
-#define TYPE_SDR 4 /* SDRAM */
-#define TYPE_ROM 5 /* */
-#define TYPE_SGRRAM 6 /* graphics memory */
-#define TYPE_DDR 7 /* DDR sdram */
-#define SDRAMDS_MASK 0x3 /* each field is 2 bits wide */
-#define SDRAMDS_SBE_SHIFT 8 /* Clock enable drive strength */
-#define SDRAMDS_SBC_SHIFT 6 /* Clocks drive strength */
-#define SDRAMDS_SBA_SHIFT 4 /* Address drive strength */
-#define SDRAMDS_SBS_SHIFT 2 /* SDR DQS drive strength */
-#define SDRAMDS_SBD_SHIFT 0 /* Data and DQS drive strength */
-#define DRIVE_STRENGTH_HIGH 0
-#define DRIVE_STRENGTH_MED 1
-#define DRIVE_STRENGTH_LOW 2
-#define DRIVE_STRENGTH_OFF 3
-
-#define OK 0
-#define ERROR -1
-/* Structure to hold information about address muxing. */
- typedef struct tagMuxDescriptor {
- u8 MuxValue;
- u8 Columns;
- u8 Rows;
- u8 MoreColumns;
-} muxdesc_t;
-
-/* Structure to define one physical bank of
- * memory. Note that dram size in bytes is
- * (2^^(rows+columns)) * width * banks / 8
-*/
-typedef struct tagDramInfo {
- u32 size; /* size in bytes */
- u32 base; /* base address */
- u8 ordinal; /* where in the memory map will we put this */
- u8 type;
- u8 rows;
- u8 cols;
- u16 width; /* width of each chip in bits */
- u8 banks; /* number of chips, aka logical banks */
- u8 bursts; /* bit-encoded allowable burst length */
- u8 CAS; /* bit-encoded CAS latency values */
- u8 CS; /* bit-encoded CS latency values */
- u8 WE; /* bit-encoded WE latency values */
- u8 Trp; /* bit-encoded row precharge time */
- u8 Trcd; /* bit-encoded RAS to CAS delay */
- u8 buffered; /* buffered or not */
- u8 refresh; /* encoded refresh rate */
-} draminfo_t;
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __INCdramsetuph */
diff --git a/arch/powerpc/cpu/mpc8220/fec.c b/arch/powerpc/cpu/mpc8220/fec.c
deleted file mode 100644
index 43fa802..0000000
--- a/arch/powerpc/cpu/mpc8220/fec.c
+++ /dev/null
@@ -1,961 +0,0 @@
-/*
- * (C) Copyright 2003-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * This file is based on mpc4200fec.c,
- * (C) Copyright Motorola, Inc., 2000
- */
-
-#include <common.h>
-#include <mpc8220.h>
-#include <malloc.h>
-#include <net.h>
-#include <miiphy.h>
-#include "dma.h"
-#include "fec.h"
-
-#undef DEBUG
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_MPC8220_FEC)
-
-#if !(defined(CONFIG_MII) || defined(CONFIG_CMD_MII))
-#error "CONFIG_MII has to be defined!"
-#endif
-
-#ifdef DEBUG
-static void tfifo_print (char *devname, mpc8220_fec_priv * fec);
-static void rfifo_print (char *devname, mpc8220_fec_priv * fec);
-#endif /* DEBUG */
-
-typedef struct {
- u8 data[1500]; /* actual data */
- int length; /* actual length */
- int used; /* buffer in use or not */
- u8 head[16]; /* MAC header(6 + 6 + 2) + 2(aligned) */
-} NBUF;
-
-int fec8220_miiphy_read (const char *devname, u8 phyAddr, u8 regAddr, u16 *retVal);
-int fec8220_miiphy_write (const char *devname, u8 phyAddr, u8 regAddr, u16 data);
-
-/********************************************************************/
-#ifdef DEBUG
-static void mpc8220_fec_phydump (char *devname)
-{
- u16 phyStatus, i;
- u8 phyAddr = CONFIG_PHY_ADDR;
- u8 reg_mask[] = {
-#if CONFIG_PHY_TYPE == 0x79c874 /* AMD Am79C874 */
- /* regs to print: 0...7, 16...19, 21, 23, 24 */
- 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 1, 1, 1, 0, 1, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0,
-#else
- /* regs to print: 0...8, 16...20 */
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0,
- 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-#endif
- };
-
- for (i = 0; i < 32; i++) {
- if (reg_mask[i]) {
- miiphy_read (devname, phyAddr, i, &phyStatus);
- printf ("Mii reg %d: 0x%04x\n", i, phyStatus);
- }
- }
-}
-#endif
-
-/********************************************************************/
-static int mpc8220_fec_rbd_init (mpc8220_fec_priv * fec)
-{
- int ix;
- char *data;
- static int once = 0;
-
- for (ix = 0; ix < FEC_RBD_NUM; ix++) {
- if (!once) {
- data = (char *) malloc (FEC_MAX_PKT_SIZE);
- if (data == NULL) {
- printf ("RBD INIT FAILED\n");
- return -1;
- }
- fec->rbdBase[ix].dataPointer = (u32) data;
- }
- fec->rbdBase[ix].status = FEC_RBD_EMPTY;
- fec->rbdBase[ix].dataLength = 0;
- }
- once++;
-
- /*
- * have the last RBD to close the ring
- */
- fec->rbdBase[ix - 1].status |= FEC_RBD_WRAP;
- fec->rbdIndex = 0;
-
- return 0;
-}
-
-/********************************************************************/
-static void mpc8220_fec_tbd_init (mpc8220_fec_priv * fec)
-{
- int ix;
-
- for (ix = 0; ix < FEC_TBD_NUM; ix++) {
- fec->tbdBase[ix].status = 0;
- }
-
- /*
- * Have the last TBD to close the ring
- */
- fec->tbdBase[ix - 1].status |= FEC_TBD_WRAP;
-
- /*
- * Initialize some indices
- */
- fec->tbdIndex = 0;
- fec->usedTbdIndex = 0;
- fec->cleanTbdNum = FEC_TBD_NUM;
-}
-
-/********************************************************************/
-static void mpc8220_fec_rbd_clean (mpc8220_fec_priv * fec, FEC_RBD * pRbd)
-{
- /*
- * Reset buffer descriptor as empty
- */
- if ((fec->rbdIndex) == (FEC_RBD_NUM - 1))
- pRbd->status = (FEC_RBD_WRAP | FEC_RBD_EMPTY);
- else
- pRbd->status = FEC_RBD_EMPTY;
-
- pRbd->dataLength = 0;
-
- /*
- * Now, we have an empty RxBD, restart the SmartDMA receive task
- */
- DMA_TASK_ENABLE (FEC_RECV_TASK_NO);
-
- /*
- * Increment BD count
- */
- fec->rbdIndex = (fec->rbdIndex + 1) % FEC_RBD_NUM;
-}
-
-/********************************************************************/
-static void mpc8220_fec_tbd_scrub (mpc8220_fec_priv * fec)
-{
- FEC_TBD *pUsedTbd;
-
-#ifdef DEBUG
- printf ("tbd_scrub: fec->cleanTbdNum = %d, fec->usedTbdIndex = %d\n",
- fec->cleanTbdNum, fec->usedTbdIndex);
-#endif
-
- /*
- * process all the consumed TBDs
- */
- while (fec->cleanTbdNum < FEC_TBD_NUM) {
- pUsedTbd = &fec->tbdBase[fec->usedTbdIndex];
- if (pUsedTbd->status & FEC_TBD_READY) {
-#ifdef DEBUG
- printf ("Cannot clean TBD %d, in use\n",
- fec->cleanTbdNum);
-#endif
- return;
- }
-
- /*
- * clean this buffer descriptor
- */
- if (fec->usedTbdIndex == (FEC_TBD_NUM - 1))
- pUsedTbd->status = FEC_TBD_WRAP;
- else
- pUsedTbd->status = 0;
-
- /*
- * update some indeces for a correct handling of the TBD ring
- */
- fec->cleanTbdNum++;
- fec->usedTbdIndex = (fec->usedTbdIndex + 1) % FEC_TBD_NUM;
- }
-}
-
-/********************************************************************/
-static void mpc8220_fec_set_hwaddr (mpc8220_fec_priv * fec, char *mac)
-{
- u8 currByte; /* byte for which to compute the CRC */
- int byte; /* loop - counter */
- int bit; /* loop - counter */
- u32 crc = 0xffffffff; /* initial value */
-
- /*
- * The algorithm used is the following:
- * we loop on each of the six bytes of the provided address,
- * and we compute the CRC by left-shifting the previous
- * value by one position, so that each bit in the current
- * byte of the address may contribute the calculation. If
- * the latter and the MSB in the CRC are different, then
- * the CRC value so computed is also ex-ored with the
- * "polynomium generator". The current byte of the address
- * is also shifted right by one bit at each iteration.
- * This is because the CRC generatore in hardware is implemented
- * as a shift-register with as many ex-ores as the radixes
- * in the polynomium. This suggests that we represent the
- * polynomiumm itself as a 32-bit constant.
- */
- for (byte = 0; byte < 6; byte++) {
- currByte = mac[byte];
- for (bit = 0; bit < 8; bit++) {
- if ((currByte & 0x01) ^ (crc & 0x01)) {
- crc >>= 1;
- crc = crc ^ 0xedb88320;
- } else {
- crc >>= 1;
- }
- currByte >>= 1;
- }
- }
-
- crc = crc >> 26;
-
- /*
- * Set individual hash table register
- */
- if (crc >= 32) {
- fec->eth->iaddr1 = (1 << (crc - 32));
- fec->eth->iaddr2 = 0;
- } else {
- fec->eth->iaddr1 = 0;
- fec->eth->iaddr2 = (1 << crc);
- }
-
- /*
- * Set physical address
- */
- fec->eth->paddr1 =
- (mac[0] << 24) + (mac[1] << 16) + (mac[2] << 8) + mac[3];
- fec->eth->paddr2 = (mac[4] << 24) + (mac[5] << 16) + 0x8808;
-}
-
-/********************************************************************/
-static int mpc8220_fec_init (struct eth_device *dev, bd_t * bis)
-{
- mpc8220_fec_priv *fec = (mpc8220_fec_priv *) dev->priv;
- struct mpc8220_dma *dma = (struct mpc8220_dma *) MMAP_DMA;
- const u8 phyAddr = CONFIG_PHY_ADDR; /* Only one PHY */
-
-#ifdef DEBUG
- printf ("mpc8220_fec_init... Begin\n");
-#endif
-
- /*
- * Initialize RxBD/TxBD rings
- */
- mpc8220_fec_rbd_init (fec);
- mpc8220_fec_tbd_init (fec);
-
- /*
- * Set up Pin Muxing for FEC 1
- */
- *(vu_long *) MMAP_PCFG = 0;
- *(vu_long *) (MMAP_PCFG + 4) = 0;
- /*
- * Clear FEC-Lite interrupt event register(IEVENT)
- */
- fec->eth->ievent = 0xffffffff;
-
- /*
- * Set interrupt mask register
- */
- fec->eth->imask = 0x00000000;
-
- /*
- * Set FEC-Lite receive control register(R_CNTRL):
- */
- if (fec->xcv_type == SEVENWIRE) {
- /*
- * Frame length=1518; 7-wire mode
- */
- fec->eth->r_cntrl = 0x05ee0020; /*0x05ee0000;FIXME */
- } else {
- /*
- * Frame length=1518; MII mode;
- */
- fec->eth->r_cntrl = 0x05ee0024; /*0x05ee0004;FIXME */
- }
-
- fec->eth->x_cntrl = 0x00000000; /* half-duplex, heartbeat disabled */
- if (fec->xcv_type != SEVENWIRE) {
- /*
- * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock
- * and do not drop the Preamble.
- */
- /*
- * tbd - rtm
- * fec->eth->mii_speed = (((gd->arch.ipb_clk >> 20) / 5) << 1);
- * No MII for 7-wire mode
- */
- fec->eth->mii_speed = 0x00000030;
- }
-
- /*
- * Set Opcode/Pause Duration Register
- */
- fec->eth->op_pause = 0x00010020; /*FIXME0xffff0020; */
-
- /*
- * Set Rx FIFO alarm and granularity value
- */
- fec->eth->rfifo_cntrl = 0x0c000000;
- fec->eth->rfifo_alarm = 0x0000030c;
-#ifdef DEBUG
- if (fec->eth->rfifo_status & 0x00700000) {
- printf ("mpc8220_fec_init() RFIFO error\n");
- }
-#endif
-
- /*
- * Set Tx FIFO granularity value
- */
- /*fec->eth->tfifo_cntrl = 0x0c000000; */ /*tbd - rtm */
- fec->eth->tfifo_cntrl = 0x0e000000;
-#ifdef DEBUG
- printf ("tfifo_status: 0x%08x\n", fec->eth->tfifo_status);
- printf ("tfifo_alarm: 0x%08x\n", fec->eth->tfifo_alarm);
-#endif
-
- /*
- * Set transmit fifo watermark register(X_WMRK), default = 64
- */
- fec->eth->tfifo_alarm = 0x00000080;
- fec->eth->x_wmrk = 0x2;
-
- /*
- * Set individual address filter for unicast address
- * and set physical address registers.
- */
- mpc8220_fec_set_hwaddr (fec, (char *)(dev->enetaddr));
-
- /*
- * Set multicast address filter
- */
- fec->eth->gaddr1 = 0x00000000;
- fec->eth->gaddr2 = 0x00000000;
-
- /*
- * Turn ON cheater FSM: ????
- */
- fec->eth->xmit_fsm = 0x03000000;
-
-#if 1
-/*#if defined(CONFIG_MPC5200)*/
- /*
- * Turn off COMM bus prefetch in the MGT5200 BestComm. It doesn't
- * work w/ the current receive task.
- */
- dma->PtdCntrl |= 0x00000001;
-#endif
-
- /*
- * Set priority of different initiators
- */
- dma->IPR0 = 7; /* always */
- dma->IPR3 = 6; /* Eth RX */
- dma->IPR4 = 5; /* Eth Tx */
-
- /*
- * Clear SmartDMA task interrupt pending bits
- */
- DMA_CLEAR_IEVENT (FEC_RECV_TASK_NO);
-
- /*
- * Initialize SmartDMA parameters stored in SRAM
- */
- *(int *) FEC_TBD_BASE = (int) fec->tbdBase;
- *(int *) FEC_RBD_BASE = (int) fec->rbdBase;
- *(int *) FEC_TBD_NEXT = (int) fec->tbdBase;
- *(int *) FEC_RBD_NEXT = (int) fec->rbdBase;
-
- if (fec->xcv_type != SEVENWIRE) {
- /*
- * Initialize PHY(LXT971A):
- *
- * Generally, on power up, the LXT971A reads its configuration
- * pins to check for forced operation, If not cofigured for
- * forced operation, it uses auto-negotiation/parallel detection
- * to automatically determine line operating conditions.
- * If the PHY device on the other side of the link supports
- * auto-negotiation, the LXT971A auto-negotiates with it
- * using Fast Link Pulse(FLP) Bursts. If the PHY partner does not
- * support auto-negotiation, the LXT971A automatically detects
- * the presence of either link pulses(10Mbps PHY) or Idle
- * symbols(100Mbps) and sets its operating conditions accordingly.
- *
- * When auto-negotiation is controlled by software, the following
- * steps are recommended.
- *
- * Note:
- * The physical address is dependent on hardware configuration.
- *
- */
- int timeout = 1;
- u16 phyStatus;
-
- /*
- * Reset PHY, then delay 300ns
- */
- miiphy_write (dev->name, phyAddr, 0x0, 0x8000);
- udelay (1000);
-
- if (fec->xcv_type == MII10) {
- /*
- * Force 10Base-T, FDX operation
- */
-#ifdef DEBUG
- printf ("Forcing 10 Mbps ethernet link... ");
-#endif
- miiphy_read (dev->name, phyAddr, 0x1, &phyStatus);
- /*
- miiphy_write(fec, phyAddr, 0x0, 0x0100);
- */
- miiphy_write (dev->name, phyAddr, 0x0, 0x0180);
-
- timeout = 20;
- do { /* wait for link status to go down */
- udelay (10000);
- if ((timeout--) == 0) {
-#ifdef DEBUG
- printf ("hmmm, should not have waited...");
-#endif
- break;
- }
- miiphy_read (dev->name, phyAddr, 0x1, &phyStatus);
-#ifdef DEBUG
- printf ("=");
-#endif
- } while ((phyStatus & 0x0004)); /* !link up */
-
- timeout = 1000;
- do { /* wait for link status to come back up */
- udelay (10000);
- if ((timeout--) == 0) {
- printf ("failed. Link is down.\n");
- break;
- }
- miiphy_read (dev->name, phyAddr, 0x1, &phyStatus);
-#ifdef DEBUG
- printf ("+");
-#endif
- } while (!(phyStatus & 0x0004)); /* !link up */
-
-#ifdef DEBUG
- printf ("done.\n");
-#endif
- } else { /* MII100 */
- /*
- * Set the auto-negotiation advertisement register bits
- */
- miiphy_write (dev->name, phyAddr, 0x4, 0x01e1);
-
- /*
- * Set MDIO bit 0.12 = 1(&& bit 0.9=1?) to enable auto-negotiation
- */
- miiphy_write (dev->name, phyAddr, 0x0, 0x1200);
-
- /*
- * Wait for AN completion
- */
- timeout = 5000;
- do {
- udelay (1000);
-
- if ((timeout--) == 0) {
-#ifdef DEBUG
- printf ("PHY auto neg 0 failed...\n");
-#endif
- return -1;
- }
-
- if (miiphy_read (dev->name, phyAddr, 0x1, &phyStatus) !=
- 0) {
-#ifdef DEBUG
- printf ("PHY auto neg 1 failed 0x%04x...\n", phyStatus);
-#endif
- return -1;
- }
- } while (!(phyStatus & 0x0004));
-
-#ifdef DEBUG
- printf ("PHY auto neg complete! \n");
-#endif
- }
-
- }
-
- /*
- * Enable FEC-Lite controller
- */
- fec->eth->ecntrl |= 0x00000006;
-
-#ifdef DEBUG
- if (fec->xcv_type != SEVENWIRE)
- mpc8220_fec_phydump (dev->name);
-#endif
-
- /*
- * Enable SmartDMA receive task
- */
- DMA_TASK_ENABLE (FEC_RECV_TASK_NO);
-
-#ifdef DEBUG
- printf ("mpc8220_fec_init... Done \n");
-#endif
-
- return 1;
-}
-
-/********************************************************************/
-static void mpc8220_fec_halt (struct eth_device *dev)
-{
- mpc8220_fec_priv *fec = (mpc8220_fec_priv *) dev->priv;
- int counter = 0xffff;
-
-#ifdef DEBUG
- if (fec->xcv_type != SEVENWIRE)
- mpc8220_fec_phydump (dev->name);
-#endif
-
- /*
- * mask FEC chip interrupts
- */
- fec->eth->imask = 0;
-
- /*
- * issue graceful stop command to the FEC transmitter if necessary
- */
- fec->eth->x_cntrl |= 0x00000001;
-
- /*
- * wait for graceful stop to register
- */
- while ((counter--) && (!(fec->eth->ievent & 0x10000000)));
-
- /*
- * Disable SmartDMA tasks
- */
- DMA_TASK_DISABLE (FEC_XMIT_TASK_NO);
- DMA_TASK_DISABLE (FEC_RECV_TASK_NO);
-
- /*
- * Disable the Ethernet Controller
- */
- fec->eth->ecntrl &= 0xfffffffd;
-
- /*
- * Clear FIFO status registers
- */
- fec->eth->rfifo_status &= 0x00700000;
- fec->eth->tfifo_status &= 0x00700000;
-
- fec->eth->reset_cntrl = 0x01000000;
-
- /*
- * Issue a reset command to the FEC chip
- */
- fec->eth->ecntrl |= 0x1;
-
- /*
- * wait at least 16 clock cycles
- */
- udelay (10);
-
-#ifdef DEBUG
- printf ("Ethernet task stopped\n");
-#endif
-}
-
-#ifdef DEBUG
-/********************************************************************/
-
-static void tfifo_print (char *devname, mpc8220_fec_priv * fec)
-{
- u16 phyAddr = CONFIG_PHY_ADDR;
- u16 phyStatus;
-
- if ((fec->eth->tfifo_lrf_ptr != fec->eth->tfifo_lwf_ptr)
- || (fec->eth->tfifo_rdptr != fec->eth->tfifo_wrptr)) {
-
- miiphy_read (devname, phyAddr, 0x1, &phyStatus);
- printf ("\nphyStatus: 0x%04x\n", phyStatus);
- printf ("ecntrl: 0x%08x\n", fec->eth->ecntrl);
- printf ("ievent: 0x%08x\n", fec->eth->ievent);
- printf ("x_status: 0x%08x\n", fec->eth->x_status);
- printf ("tfifo: status 0x%08x\n", fec->eth->tfifo_status);
-
- printf (" control 0x%08x\n", fec->eth->tfifo_cntrl);
- printf (" lrfp 0x%08x\n", fec->eth->tfifo_lrf_ptr);
- printf (" lwfp 0x%08x\n", fec->eth->tfifo_lwf_ptr);
- printf (" alarm 0x%08x\n", fec->eth->tfifo_alarm);
- printf (" readptr 0x%08x\n", fec->eth->tfifo_rdptr);
- printf (" writptr 0x%08x\n", fec->eth->tfifo_wrptr);
- }
-}
-
-static void rfifo_print (char *devname, mpc8220_fec_priv * fec)
-{
- u16 phyAddr = CONFIG_PHY_ADDR;
- u16 phyStatus;
-
- if ((fec->eth->rfifo_lrf_ptr != fec->eth->rfifo_lwf_ptr)
- || (fec->eth->rfifo_rdptr != fec->eth->rfifo_wrptr)) {
-
- miiphy_read (devname, phyAddr, 0x1, &phyStatus);
- printf ("\nphyStatus: 0x%04x\n", phyStatus);
- printf ("ecntrl: 0x%08x\n", fec->eth->ecntrl);
- printf ("ievent: 0x%08x\n", fec->eth->ievent);
- printf ("x_status: 0x%08x\n", fec->eth->x_status);
- printf ("rfifo: status 0x%08x\n", fec->eth->rfifo_status);
-
- printf (" control 0x%08x\n", fec->eth->rfifo_cntrl);
- printf (" lrfp 0x%08x\n", fec->eth->rfifo_lrf_ptr);
- printf (" lwfp 0x%08x\n", fec->eth->rfifo_lwf_ptr);
- printf (" alarm 0x%08x\n", fec->eth->rfifo_alarm);
- printf (" readptr 0x%08x\n", fec->eth->rfifo_rdptr);
- printf (" writptr 0x%08x\n", fec->eth->rfifo_wrptr);
- }
-}
-#endif /* DEBUG */
-
-/********************************************************************/
-
-static int mpc8220_fec_send(struct eth_device *dev, void *eth_data,
- int data_length)
-{
- /*
- * This routine transmits one frame. This routine only accepts
- * 6-byte Ethernet addresses.
- */
- mpc8220_fec_priv *fec = (mpc8220_fec_priv *) dev->priv;
- FEC_TBD *pTbd;
-
-#ifdef DEBUG
- printf ("tbd status: 0x%04x\n", fec->tbdBase[0].status);
- tfifo_print (dev->name, fec);
-#endif
-
- /*
- * Clear Tx BD ring at first
- */
- mpc8220_fec_tbd_scrub (fec);
-
- /*
- * Check for valid length of data.
- */
- if ((data_length > 1500) || (data_length <= 0)) {
- return -1;
- }
-
- /*
- * Check the number of vacant TxBDs.
- */
- if (fec->cleanTbdNum < 1) {
-#ifdef DEBUG
- printf ("No available TxBDs ...\n");
-#endif
- return -1;
- }
-
- /*
- * Get the first TxBD to send the mac header
- */
- pTbd = &fec->tbdBase[fec->tbdIndex];
- pTbd->dataLength = data_length;
- pTbd->dataPointer = (u32) eth_data;
- pTbd->status |= FEC_TBD_LAST | FEC_TBD_TC | FEC_TBD_READY;
- fec->tbdIndex = (fec->tbdIndex + 1) % FEC_TBD_NUM;
-
-#ifdef DEBUG
- printf ("DMA_TASK_ENABLE, fec->tbdIndex = %d \n", fec->tbdIndex);
-#endif
-
- /*
- * Kick the MII i/f
- */
- if (fec->xcv_type != SEVENWIRE) {
- u16 phyStatus;
-
- miiphy_read (dev->name, 0, 0x1, &phyStatus);
- }
-
- /*
- * Enable SmartDMA transmit task
- */
-
-#ifdef DEBUG
- tfifo_print (dev->name, fec);
-#endif
-
- DMA_TASK_ENABLE (FEC_XMIT_TASK_NO);
-
-#ifdef DEBUG
- tfifo_print (dev->name, fec);
-#endif
-
-#ifdef DEBUG
- printf ("+");
-#endif
-
- fec->cleanTbdNum -= 1;
-
-#ifdef DEBUG
- printf ("smartDMA ethernet Tx task enabled\n");
-#endif
- /*
- * wait until frame is sent .
- */
- while (pTbd->status & FEC_TBD_READY) {
- udelay (10);
-#ifdef DEBUG
- printf ("TDB status = %04x\n", pTbd->status);
-#endif
- }
-
- return 0;
-}
-
-
-/********************************************************************/
-static int mpc8220_fec_recv (struct eth_device *dev)
-{
- /*
- * This command pulls one frame from the card
- */
- mpc8220_fec_priv *fec = (mpc8220_fec_priv *) dev->priv;
- FEC_RBD *pRbd = &fec->rbdBase[fec->rbdIndex];
- unsigned long ievent;
- int frame_length, len = 0;
- NBUF *frame;
-
-#ifdef DEBUG
- printf ("mpc8220_fec_recv %d Start...\n", fec->rbdIndex);
- printf ("-");
-#endif
-
- /*
- * Check if any critical events have happened
- */
- ievent = fec->eth->ievent;
- fec->eth->ievent = ievent;
- if (ievent & 0x20060000) {
- /* BABT, Rx/Tx FIFO errors */
- mpc8220_fec_halt (dev);
- mpc8220_fec_init (dev, NULL);
- return 0;
- }
- if (ievent & 0x80000000) {
- /* Heartbeat error */
- fec->eth->x_cntrl |= 0x00000001;
- }
- if (ievent & 0x10000000) {
- /* Graceful stop complete */
- if (fec->eth->x_cntrl & 0x00000001) {
- mpc8220_fec_halt (dev);
- fec->eth->x_cntrl &= ~0x00000001;
- mpc8220_fec_init (dev, NULL);
- }
- }
-
- if (!(pRbd->status & FEC_RBD_EMPTY)) {
- if ((pRbd->status & FEC_RBD_LAST)
- && !(pRbd->status & FEC_RBD_ERR)
- && ((pRbd->dataLength - 4) > 14)) {
-
- /*
- * Get buffer address and size
- */
- frame = (NBUF *) pRbd->dataPointer;
- frame_length = pRbd->dataLength - 4;
-
- /* DEBUG code */
- if (_DEBUG) {
- int i;
-
- printf ("recv data hdr:");
- for (i = 0; i < 14; i++)
- printf ("%x ", *(frame->head + i));
- printf ("\n");
- }
-
- /*
- * Fill the buffer and pass it to upper layers
- */
-/* memcpy(buff, frame->head, 14);
- memcpy(buff + 14, frame->data, frame_length);*/
- NetReceive((uchar *)pRbd->dataPointer, frame_length);
- len = frame_length;
- }
- /*
- * Reset buffer descriptor as empty
- */
- mpc8220_fec_rbd_clean (fec, pRbd);
- }
- DMA_CLEAR_IEVENT (FEC_RECV_TASK_NO);
- return len;
-}
-
-
-/********************************************************************/
-int mpc8220_fec_initialize (bd_t * bis)
-{
- mpc8220_fec_priv *fec;
-
-#ifdef CONFIG_HAS_ETH1
- mpc8220_fec_priv *fec2;
-#endif
- struct eth_device *dev;
- char *tmp, *end;
- char env_enetaddr[6];
-
-#ifdef CONFIG_HAS_ETH1
- char env_enet1addr[6];
-#endif
- int i;
-
- fec = (mpc8220_fec_priv *) malloc (sizeof (*fec));
- dev = (struct eth_device *) malloc (sizeof (*dev));
- memset (dev, 0, sizeof *dev);
-
- fec->eth = (ethernet_regs *) MMAP_FEC1;
-#ifdef CONFIG_HAS_ETH1
- fec2 = (mpc8220_fec_priv *) malloc (sizeof (*fec));
- fec2->eth = (ethernet_regs *) MMAP_FEC2;
-#endif
- fec->tbdBase = (FEC_TBD *) FEC_BD_BASE;
- fec->rbdBase =
- (FEC_RBD *) (FEC_BD_BASE + FEC_TBD_NUM * sizeof (FEC_TBD));
- fec->xcv_type = MII100;
-
- dev->priv = (void *) fec;
- dev->iobase = MMAP_FEC1;
- dev->init = mpc8220_fec_init;
- dev->halt = mpc8220_fec_halt;
- dev->send = mpc8220_fec_send;
- dev->recv = mpc8220_fec_recv;
-
- sprintf (dev->name, "FEC");
- eth_register (dev);
-
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
- miiphy_register (dev->name,
- fec8220_miiphy_read, fec8220_miiphy_write);
-#endif
-
- /*
- * Try to set the mac address now. The fec mac address is
- * a garbage after reset. When not using fec for booting
- * the Linux fec driver will try to work with this garbage.
- */
- tmp = getenv ("ethaddr");
- if (tmp) {
- for (i = 0; i < 6; i++) {
- env_enetaddr[i] =
- tmp ? simple_strtoul (tmp, &end, 16) : 0;
- if (tmp)
- tmp = (*end) ? end + 1 : end;
- }
- mpc8220_fec_set_hwaddr (fec, env_enetaddr);
- }
-#ifdef CONFIG_HAS_ETH1
- tmp = getenv ("eth1addr");
- if (tmp) {
- for (i = 0; i < 6; i++) {
- env_enet1addr[i] =
- tmp ? simple_strtoul (tmp, &end, 16) : 0;
- if (tmp)
- tmp = (*end) ? end + 1 : end;
- }
- mpc8220_fec_set_hwaddr (fec2, env_enet1addr);
- }
-#endif
-
- return 1;
-}
-
-/* MII-interface related functions */
-/********************************************************************/
-int fec8220_miiphy_read (const char *devname, u8 phyAddr, u8 regAddr, u16 *retVal)
-{
- ethernet_regs *eth = (ethernet_regs *) MMAP_FEC1;
- u32 reg; /* convenient holder for the PHY register */
- u32 phy; /* convenient holder for the PHY */
- int timeout = 0xffff;
-
- /*
- * reading from any PHY's register is done by properly
- * programming the FEC's MII data register.
- */
- reg = regAddr << FEC_MII_DATA_RA_SHIFT;
- phy = phyAddr << FEC_MII_DATA_PA_SHIFT;
-
- eth->mii_data =
- (FEC_MII_DATA_ST | FEC_MII_DATA_OP_RD | FEC_MII_DATA_TA | phy
- | reg);
-
- /*
- * wait for the related interrupt
- */
- while ((timeout--) && (!(eth->ievent & 0x00800000)));
-
- if (timeout == 0) {
-#ifdef DEBUG
- printf ("Read MDIO failed...\n");
-#endif
- return -1;
- }
-
- /*
- * clear mii interrupt bit
- */
- eth->ievent = 0x00800000;
-
- /*
- * it's now safe to read the PHY's register
- */
- *retVal = (u16) eth->mii_data;
-
- return 0;
-}
-
-/********************************************************************/
-int fec8220_miiphy_write(const char *devname, u8 phyAddr, u8 regAddr, u16 data)
-{
- ethernet_regs *eth = (ethernet_regs *) MMAP_FEC1;
- u32 reg; /* convenient holder for the PHY register */
- u32 phy; /* convenient holder for the PHY */
- int timeout = 0xffff;
-
- reg = regAddr << FEC_MII_DATA_RA_SHIFT;
- phy = phyAddr << FEC_MII_DATA_PA_SHIFT;
-
- eth->mii_data = (FEC_MII_DATA_ST | FEC_MII_DATA_OP_WR |
- FEC_MII_DATA_TA | phy | reg | data);
-
- /*
- * wait for the MII interrupt
- */
- while ((timeout--) && (!(eth->ievent & 0x00800000)));
-
- if (timeout == 0) {
-#ifdef DEBUG
- printf ("Write MDIO failed...\n");
-#endif
- return -1;
- }
-
- /*
- * clear MII interrupt bit
- */
- eth->ievent = 0x00800000;
-
- return 0;
-}
-
-#endif /* CONFIG_MPC8220_FEC */
diff --git a/arch/powerpc/cpu/mpc8220/fec.h b/arch/powerpc/cpu/mpc8220/fec.h
deleted file mode 100644
index a8927fc..0000000
--- a/arch/powerpc/cpu/mpc8220/fec.h
+++ /dev/null
@@ -1,283 +0,0 @@
-/*
- * (C) Copyright 2003-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * This file is based on mpc4200fec.h
- * (C) Copyright Motorola, Inc., 2000
- *
- * odin ethernet header file
- */
-
-#ifndef __MPC8220_FEC_H
-#define __MPC8220_FEC_H
-
-#include <common.h>
-#include <mpc8220.h>
-#include "dma.h"
-
-typedef struct ethernet_register_set {
-
-/* [10:2]addr = 00 */
-
-/* Control and status Registers (offset 000-1FF) */
-
- volatile u32 fec_id; /* MBAR_ETH + 0x000 */
- volatile u32 ievent; /* MBAR_ETH + 0x004 */
- volatile u32 imask; /* MBAR_ETH + 0x008 */
-
- volatile u32 RES0[1]; /* MBAR_ETH + 0x00C */
- volatile u32 r_des_active; /* MBAR_ETH + 0x010 */
- volatile u32 x_des_active; /* MBAR_ETH + 0x014 */
- volatile u32 r_des_active_cl; /* MBAR_ETH + 0x018 */
- volatile u32 x_des_active_cl; /* MBAR_ETH + 0x01C */
- volatile u32 ivent_set; /* MBAR_ETH + 0x020 */
- volatile u32 ecntrl; /* MBAR_ETH + 0x024 */
-
- volatile u32 RES1[6]; /* MBAR_ETH + 0x028-03C */
- volatile u32 mii_data; /* MBAR_ETH + 0x040 */
- volatile u32 mii_speed; /* MBAR_ETH + 0x044 */
- volatile u32 mii_status; /* MBAR_ETH + 0x048 */
-
- volatile u32 RES2[5]; /* MBAR_ETH + 0x04C-05C */
- volatile u32 mib_data; /* MBAR_ETH + 0x060 */
- volatile u32 mib_control; /* MBAR_ETH + 0x064 */
-
- volatile u32 RES3[6]; /* MBAR_ETH + 0x068-7C */
- volatile u32 r_activate; /* MBAR_ETH + 0x080 */
- volatile u32 r_cntrl; /* MBAR_ETH + 0x084 */
- volatile u32 r_hash; /* MBAR_ETH + 0x088 */
- volatile u32 r_data; /* MBAR_ETH + 0x08C */
- volatile u32 ar_done; /* MBAR_ETH + 0x090 */
- volatile u32 r_test; /* MBAR_ETH + 0x094 */
- volatile u32 r_mib; /* MBAR_ETH + 0x098 */
- volatile u32 r_da_low; /* MBAR_ETH + 0x09C */
- volatile u32 r_da_high; /* MBAR_ETH + 0x0A0 */
-
- volatile u32 RES4[7]; /* MBAR_ETH + 0x0A4-0BC */
- volatile u32 x_activate; /* MBAR_ETH + 0x0C0 */
- volatile u32 x_cntrl; /* MBAR_ETH + 0x0C4 */
- volatile u32 backoff; /* MBAR_ETH + 0x0C8 */
- volatile u32 x_data; /* MBAR_ETH + 0x0CC */
- volatile u32 x_status; /* MBAR_ETH + 0x0D0 */
- volatile u32 x_mib; /* MBAR_ETH + 0x0D4 */
- volatile u32 x_test; /* MBAR_ETH + 0x0D8 */
- volatile u32 fdxfc_da1; /* MBAR_ETH + 0x0DC */
- volatile u32 fdxfc_da2; /* MBAR_ETH + 0x0E0 */
- volatile u32 paddr1; /* MBAR_ETH + 0x0E4 */
- volatile u32 paddr2; /* MBAR_ETH + 0x0E8 */
- volatile u32 op_pause; /* MBAR_ETH + 0x0EC */
-
- volatile u32 RES5[4]; /* MBAR_ETH + 0x0F0-0FC */
- volatile u32 instr_reg; /* MBAR_ETH + 0x100 */
- volatile u32 context_reg; /* MBAR_ETH + 0x104 */
- volatile u32 test_cntrl; /* MBAR_ETH + 0x108 */
- volatile u32 acc_reg; /* MBAR_ETH + 0x10C */
- volatile u32 ones; /* MBAR_ETH + 0x110 */
- volatile u32 zeros; /* MBAR_ETH + 0x114 */
- volatile u32 iaddr1; /* MBAR_ETH + 0x118 */
- volatile u32 iaddr2; /* MBAR_ETH + 0x11C */
- volatile u32 gaddr1; /* MBAR_ETH + 0x120 */
- volatile u32 gaddr2; /* MBAR_ETH + 0x124 */
- volatile u32 random; /* MBAR_ETH + 0x128 */
- volatile u32 rand1; /* MBAR_ETH + 0x12C */
- volatile u32 tmp; /* MBAR_ETH + 0x130 */
-
- volatile u32 RES6[3]; /* MBAR_ETH + 0x134-13C */
- volatile u32 fifo_id; /* MBAR_ETH + 0x140 */
- volatile u32 x_wmrk; /* MBAR_ETH + 0x144 */
- volatile u32 fcntrl; /* MBAR_ETH + 0x148 */
- volatile u32 r_bound; /* MBAR_ETH + 0x14C */
- volatile u32 r_fstart; /* MBAR_ETH + 0x150 */
- volatile u32 r_count; /* MBAR_ETH + 0x154 */
- volatile u32 r_lag; /* MBAR_ETH + 0x158 */
- volatile u32 r_read; /* MBAR_ETH + 0x15C */
- volatile u32 r_write; /* MBAR_ETH + 0x160 */
- volatile u32 x_count; /* MBAR_ETH + 0x164 */
- volatile u32 x_lag; /* MBAR_ETH + 0x168 */
- volatile u32 x_retry; /* MBAR_ETH + 0x16C */
- volatile u32 x_write; /* MBAR_ETH + 0x170 */
- volatile u32 x_read; /* MBAR_ETH + 0x174 */
-
- volatile u32 RES7[2]; /* MBAR_ETH + 0x178-17C */
- volatile u32 fm_cntrl; /* MBAR_ETH + 0x180 */
- volatile u32 rfifo_data; /* MBAR_ETH + 0x184 */
- volatile u32 rfifo_status; /* MBAR_ETH + 0x188 */
- volatile u32 rfifo_cntrl; /* MBAR_ETH + 0x18C */
- volatile u32 rfifo_lrf_ptr; /* MBAR_ETH + 0x190 */
- volatile u32 rfifo_lwf_ptr; /* MBAR_ETH + 0x194 */
- volatile u32 rfifo_alarm; /* MBAR_ETH + 0x198 */
- volatile u32 rfifo_rdptr; /* MBAR_ETH + 0x19C */
- volatile u32 rfifo_wrptr; /* MBAR_ETH + 0x1A0 */
- volatile u32 tfifo_data; /* MBAR_ETH + 0x1A4 */
- volatile u32 tfifo_status; /* MBAR_ETH + 0x1A8 */
- volatile u32 tfifo_cntrl; /* MBAR_ETH + 0x1AC */
- volatile u32 tfifo_lrf_ptr; /* MBAR_ETH + 0x1B0 */
- volatile u32 tfifo_lwf_ptr; /* MBAR_ETH + 0x1B4 */
- volatile u32 tfifo_alarm; /* MBAR_ETH + 0x1B8 */
- volatile u32 tfifo_rdptr; /* MBAR_ETH + 0x1BC */
- volatile u32 tfifo_wrptr; /* MBAR_ETH + 0x1C0 */
-
- volatile u32 reset_cntrl; /* MBAR_ETH + 0x1C4 */
- volatile u32 xmit_fsm; /* MBAR_ETH + 0x1C8 */
-
- volatile u32 RES8[3]; /* MBAR_ETH + 0x1CC-1D4 */
- volatile u32 rdes_data0; /* MBAR_ETH + 0x1D8 */
- volatile u32 rdes_data1; /* MBAR_ETH + 0x1DC */
- volatile u32 r_length; /* MBAR_ETH + 0x1E0 */
- volatile u32 x_length; /* MBAR_ETH + 0x1E4 */
- volatile u32 x_addr; /* MBAR_ETH + 0x1E8 */
- volatile u32 cdes_data; /* MBAR_ETH + 0x1EC */
- volatile u32 status; /* MBAR_ETH + 0x1F0 */
- volatile u32 dma_control; /* MBAR_ETH + 0x1F4 */
- volatile u32 des_cmnd; /* MBAR_ETH + 0x1F8 */
- volatile u32 data; /* MBAR_ETH + 0x1FC */
-
- /* MIB COUNTERS (Offset 200-2FF) */
-
- volatile u32 rmon_t_drop; /* MBAR_ETH + 0x200 */
- volatile u32 rmon_t_packets; /* MBAR_ETH + 0x204 */
- volatile u32 rmon_t_bc_pkt; /* MBAR_ETH + 0x208 */
- volatile u32 rmon_t_mc_pkt; /* MBAR_ETH + 0x20C */
- volatile u32 rmon_t_crc_align; /* MBAR_ETH + 0x210 */
- volatile u32 rmon_t_undersize; /* MBAR_ETH + 0x214 */
- volatile u32 rmon_t_oversize; /* MBAR_ETH + 0x218 */
- volatile u32 rmon_t_frag; /* MBAR_ETH + 0x21C */
- volatile u32 rmon_t_jab; /* MBAR_ETH + 0x220 */
- volatile u32 rmon_t_col; /* MBAR_ETH + 0x224 */
- volatile u32 rmon_t_p64; /* MBAR_ETH + 0x228 */
- volatile u32 rmon_t_p65to127; /* MBAR_ETH + 0x22C */
- volatile u32 rmon_t_p128to255; /* MBAR_ETH + 0x230 */
- volatile u32 rmon_t_p256to511; /* MBAR_ETH + 0x234 */
- volatile u32 rmon_t_p512to1023; /* MBAR_ETH + 0x238 */
- volatile u32 rmon_t_p1024to2047;/* MBAR_ETH + 0x23C */
- volatile u32 rmon_t_p_gte2048; /* MBAR_ETH + 0x240 */
- volatile u32 rmon_t_octets; /* MBAR_ETH + 0x244 */
- volatile u32 ieee_t_drop; /* MBAR_ETH + 0x248 */
- volatile u32 ieee_t_frame_ok; /* MBAR_ETH + 0x24C */
- volatile u32 ieee_t_1col; /* MBAR_ETH + 0x250 */
- volatile u32 ieee_t_mcol; /* MBAR_ETH + 0x254 */
- volatile u32 ieee_t_def; /* MBAR_ETH + 0x258 */
- volatile u32 ieee_t_lcol; /* MBAR_ETH + 0x25C */
- volatile u32 ieee_t_excol; /* MBAR_ETH + 0x260 */
- volatile u32 ieee_t_macerr; /* MBAR_ETH + 0x264 */
- volatile u32 ieee_t_cserr; /* MBAR_ETH + 0x268 */
- volatile u32 ieee_t_sqe; /* MBAR_ETH + 0x26C */
- volatile u32 t_fdxfc; /* MBAR_ETH + 0x270 */
- volatile u32 ieee_t_octets_ok; /* MBAR_ETH + 0x274 */
-
- volatile u32 RES9[2]; /* MBAR_ETH + 0x278-27C */
- volatile u32 rmon_r_drop; /* MBAR_ETH + 0x280 */
- volatile u32 rmon_r_packets; /* MBAR_ETH + 0x284 */
- volatile u32 rmon_r_bc_pkt; /* MBAR_ETH + 0x288 */
- volatile u32 rmon_r_mc_pkt; /* MBAR_ETH + 0x28C */
- volatile u32 rmon_r_crc_align; /* MBAR_ETH + 0x290 */
- volatile u32 rmon_r_undersize; /* MBAR_ETH + 0x294 */
- volatile u32 rmon_r_oversize; /* MBAR_ETH + 0x298 */
- volatile u32 rmon_r_frag; /* MBAR_ETH + 0x29C */
- volatile u32 rmon_r_jab; /* MBAR_ETH + 0x2A0 */
-
- volatile u32 rmon_r_resvd_0; /* MBAR_ETH + 0x2A4 */
-
- volatile u32 rmon_r_p64; /* MBAR_ETH + 0x2A8 */
- volatile u32 rmon_r_p65to127; /* MBAR_ETH + 0x2AC */
- volatile u32 rmon_r_p128to255; /* MBAR_ETH + 0x2B0 */
- volatile u32 rmon_r_p256to511; /* MBAR_ETH + 0x2B4 */
- volatile u32 rmon_r_p512to1023; /* MBAR_ETH + 0x2B8 */
- volatile u32 rmon_r_p1024to2047;/* MBAR_ETH + 0x2BC */
- volatile u32 rmon_r_p_gte2048; /* MBAR_ETH + 0x2C0 */
- volatile u32 rmon_r_octets; /* MBAR_ETH + 0x2C4 */
- volatile u32 ieee_r_drop; /* MBAR_ETH + 0x2C8 */
- volatile u32 ieee_r_frame_ok; /* MBAR_ETH + 0x2CC */
- volatile u32 ieee_r_crc; /* MBAR_ETH + 0x2D0 */
- volatile u32 ieee_r_align; /* MBAR_ETH + 0x2D4 */
- volatile u32 r_macerr; /* MBAR_ETH + 0x2D8 */
- volatile u32 r_fdxfc; /* MBAR_ETH + 0x2DC */
- volatile u32 ieee_r_octets_ok; /* MBAR_ETH + 0x2E0 */
-
- volatile u32 RES10[6]; /* MBAR_ETH + 0x2E4-2FC */
-
- volatile u32 RES11[64]; /* MBAR_ETH + 0x300-3FF */
-} ethernet_regs;
-
-/* Receive & Transmit Buffer Descriptor definitions */
-typedef struct BufferDescriptor {
- u16 status;
- u16 dataLength;
- u32 dataPointer;
-} FEC_RBD;
-
-typedef struct {
- u16 status;
- u16 dataLength;
- u32 dataPointer;
-} FEC_TBD;
-
-/* private structure */
-typedef enum {
- SEVENWIRE, /* 7-wire */
- MII10, /* MII 10Mbps */
- MII100 /* MII 100Mbps */
-} xceiver_type;
-
-typedef struct {
- ethernet_regs *eth;
- xceiver_type xcv_type; /* transceiver type */
- FEC_RBD *rbdBase; /* RBD ring */
- FEC_TBD *tbdBase; /* TBD ring */
- u16 rbdIndex; /* next receive BD to read */
- u16 tbdIndex; /* next transmit BD to send */
- u16 usedTbdIndex; /* next transmit BD to clean */
- u16 cleanTbdNum; /* the number of available transmit BDs */
-} mpc8220_fec_priv;
-
-/* Ethernet parameter area */
-#define FEC_TBD_BASE (FEC_PARAM_BASE + 0x00)
-#define FEC_TBD_NEXT (FEC_PARAM_BASE + 0x04)
-#define FEC_RBD_BASE (FEC_PARAM_BASE + 0x08)
-#define FEC_RBD_NEXT (FEC_PARAM_BASE + 0x0c)
-
-/* BD Numer definitions */
-#define FEC_TBD_NUM 48 /* The user can adjust this value */
-#define FEC_RBD_NUM 32 /* The user can adjust this value */
-
-/* packet size limit */
-#define FEC_MAX_PKT_SIZE 1536
-
-/* RBD bits definitions */
-#define FEC_RBD_EMPTY 0x8000 /* Buffer is empty */
-#define FEC_RBD_WRAP 0x2000 /* Last BD in ring */
-#define FEC_RBD_INT 0x1000 /* Interrupt */
-#define FEC_RBD_LAST 0x0800 /* Buffer is last in frame(useless) */
-#define FEC_RBD_MISS 0x0100 /* Miss bit for prom mode */
-#define FEC_RBD_BC 0x0080 /* The received frame is broadcast frame */
-#define FEC_RBD_MC 0x0040 /* The received frame is multicast frame */
-#define FEC_RBD_LG 0x0020 /* Frame length violation */
-#define FEC_RBD_NO 0x0010 /* Nonoctet align frame */
-#define FEC_RBD_SH 0x0008 /* Short frame */
-#define FEC_RBD_CR 0x0004 /* CRC error */
-#define FEC_RBD_OV 0x0002 /* Receive FIFO overrun */
-#define FEC_RBD_TR 0x0001 /* Frame is truncated */
-#define FEC_RBD_ERR (FEC_RBD_LG | FEC_RBD_NO | FEC_RBD_CR | \
- FEC_RBD_OV | FEC_RBD_TR)
-
-/* TBD bits definitions */
-#define FEC_TBD_READY 0x8000 /* Buffer is ready */
-#define FEC_TBD_WRAP 0x2000 /* Last BD in ring */
-#define FEC_TBD_INT 0x1000 /* Interrupt */
-#define FEC_TBD_LAST 0x0800 /* Buffer is last in frame */
-#define FEC_TBD_TC 0x0400 /* Transmit the CRC */
-#define FEC_TBD_ABC 0x0200 /* Append bad CRC */
-
-/* MII-related definitios */
-#define FEC_MII_DATA_ST 0x40000000 /* Start of frame delimiter */
-#define FEC_MII_DATA_OP_RD 0x20000000 /* Perform a read operation */
-#define FEC_MII_DATA_OP_WR 0x10000000 /* Perform a write operation */
-#define FEC_MII_DATA_PA_MSK 0x0f800000 /* PHY Address field mask */
-#define FEC_MII_DATA_RA_MSK 0x007c0000 /* PHY Register field mask */
-#define FEC_MII_DATA_TA 0x00020000 /* Turnaround */
-#define FEC_MII_DATA_DATAMSK 0x0000ffff /* PHY data field */
-
-#define FEC_MII_DATA_RA_SHIFT 18 /* MII Register address bits */
-#define FEC_MII_DATA_PA_SHIFT 23 /* MII PHY address bits */
-
-#endif /* __MPC8220_FEC_H */
diff --git a/arch/powerpc/cpu/mpc8220/fec_dma_tasks.S b/arch/powerpc/cpu/mpc8220/fec_dma_tasks.S
deleted file mode 100644
index 3f8a03b..0000000
--- a/arch/powerpc/cpu/mpc8220/fec_dma_tasks.S
+++ /dev/null
@@ -1,363 +0,0 @@
-/*
- * Copyright (C) 2004, Freescale Semiconductor, Inc.
- *
- * This file contains microcode for the FEC controller of the MPC8220.
- */
-
-#include <config.h>
-
-#if defined(CONFIG_MPC8220)
-
-/* sas/sccg, gas target */
-.section smartdmaInitData,"aw",@progbits /* Initialized data for task variables */
-.section smartdmaTaskTable,"aw",@progbits /* Task tables */
-.align 9
-.globl taskTable
-taskTable:
-.globl scEthernetRecv_Entry
-scEthernetRecv_Entry: /* Task 0 */
-.long scEthernetRecv_TDT - taskTable /* Task 0 Descriptor Table */
-.long scEthernetRecv_TDT - taskTable + 0x00000094
-.long scEthernetRecv_VarTab - taskTable /* Task 0 Variable Table */
-.long scEthernetRecv_FDT - taskTable + 0x03 /* Task 0 Function Descriptor Table & Flags */
-.long 0x00000000
-.long 0x00000000
-.long scEthernetRecv_CSave - taskTable /* Task 0 context save space */
-.long 0xf0000000
-.globl scEthernetXmit_Entry
-scEthernetXmit_Entry: /* Task 1 */
-.long scEthernetXmit_TDT - taskTable /* Task 1 Descriptor Table */
-.long scEthernetXmit_TDT - taskTable + 0x000000e0
-.long scEthernetXmit_VarTab - taskTable /* Task 1 Variable Table */
-.long scEthernetXmit_FDT - taskTable + 0x03 /* Task 1 Function Descriptor Table & Flags */
-.long 0x00000000
-.long 0x00000000
-.long scEthernetXmit_CSave - taskTable /* Task 1 context save space */
-.long 0xf0000000
-
-
-.globl scEthernetRecv_TDT
-scEthernetRecv_TDT: /* Task 0 Descriptor Table */
-.long 0xc4c50000 /* 0000(153): LCDEXT: idx0 = var9 + var10; idx0 once var0; idx0 += inc0 */
-.long 0x84c5e000 /* 0004(153): LCD: idx1 = var9 + var11; ; idx1 += inc0 */
-.long 0x10001f08 /* 0008(156): DRD1A: var7 = idx1; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x10000380 /* 000C(157): DRD1A: var0 = *idx0; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x00000f88 /* 0010(158): DRD1A: var3 = *idx1; FN=0 init=0 WS=0 RS=0 */
-.long 0x81980000 /* 0014(162): LCD: idx0 = var3; idx0 once var0; idx0 += inc0 */
-.long 0x10000780 /* 0018(164): DRD1A: var1 = *idx0; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x60000000 /* 001C(165): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
-.long 0x010cf04c /* 0020(165): DRD2B1: var4 = EU3(); EU3(var1,var12) */
-.long 0x82180349 /* 0024(169): LCD: idx0 = var4; idx0 != var13; idx0 += inc1 */
-.long 0x81c68004 /* 0028(172): LCD: idx1 = var3 + var13 + 4; idx1 once var0; idx1 += inc0 */
-.long 0x70000000 /* 002C(174): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long 0x018cf04e /* 0030(174): DRD2B1: var6 = EU3(); EU3(var1,var14) */
-.long 0x70000000 /* 0034(175): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long 0x020cf04f /* 0038(175): DRD2B1: var8 = EU3(); EU3(var1,var15) */
-.long 0x00000b88 /* 003C(176): DRD1A: var2 = *idx1; FN=0 init=0 WS=0 RS=0 */
-.long 0x80025184 /* 0040(205): LCDEXT: idx1 = 0xf0009184; ; */
-.long 0x86810412 /* 0044(205): LCD: idx2 = var13, idx3 = var2; idx2 < var16; idx2 += inc2, idx3 += inc2 */
-.long 0x0200cf88 /* 0048(209): DRD1A: *idx3 = *idx1; FN=0 init=16 WS=0 RS=0 */
-.long 0x80025184 /* 004C(217): LCDEXT: idx1 = 0xf0009184; ; */
-.long 0x8681845b /* 0050(217): LCD: idx2 = var13, idx3 = var3; idx2 < var17; idx2 += inc3, idx3 += inc3 */
-.long 0x0000cf88 /* 0054(221): DRD1A: *idx3 = *idx1; FN=0 init=0 WS=0 RS=0 */
-.long 0xc31883a4 /* 0058(225): LCDEXT: idx1 = var6; idx1 == var14; idx1 += inc4 */
-.long 0x80190000 /* 005C(225): LCD: idx2 = var0; idx2 once var0; idx2 += inc0 */
-.long 0x04008468 /* 0060(227): DRD1A: idx1 = var13; FN=0 INT init=0 WS=0 RS=0 */
-.long 0xc4038360 /* 0064(232): LCDEXT: idx1 = var8, idx2 = var7; idx1 == var13; idx1 += inc4, idx2 += inc0 */
-.long 0x81c50000 /* 0068(233): LCD: idx3 = var3 + var10; idx3 once var0; idx3 += inc0 */
-.long 0x1000cb18 /* 006C(235): DRD1A: *idx2 = idx3; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x00000f18 /* 0070(236): DRD1A: var3 = idx3; FN=0 init=0 WS=0 RS=0 */
-.long 0xc418836d /* 0074(238): LCDEXT: idx1 = var8; idx1 > var13; idx1 += inc5 */
-.long 0x83990000 /* 0078(238): LCD: idx2 = var7; idx2 once var0; idx2 += inc0 */
-.long 0x10000c00 /* 007C(240): DRD1A: var3 = var0; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x0000c800 /* 0080(241): DRD1A: *idx2 = var0; FN=0 init=0 WS=0 RS=0 */
-.long 0x81988000 /* 0084(245): LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */
-.long 0x10000788 /* 0088(247): DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x60000000 /* 008C(248): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
-.long 0x080cf04c /* 0090(248): DRD2B1: idx0 = EU3(); EU3(var1,var12) */
-.long 0x000001f8 /* 0094(:0): NOP */
-
-
-.globl scEthernetXmit_TDT
-scEthernetXmit_TDT: /* Task 1 Descriptor Table */
-.long 0x80095b00 /* 0000(280): LCDEXT: idx0 = 0xf0025b00; ; */
-.long 0x85c60004 /* 0004(280): LCD: idx1 = var11 + var12 + 4; idx1 once var0; idx1 += inc0 */
-.long 0x10002308 /* 0008(283): DRD1A: var8 = idx1; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x10000f88 /* 000C(284): DRD1A: var3 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x00000380 /* 0010(285): DRD1A: var0 = *idx0; FN=0 init=0 WS=0 RS=0 */
-.long 0x81980000 /* 0014(288): LCD: idx0 = var3; idx0 once var0; idx0 += inc0 */
-.long 0x10000780 /* 0018(290): DRD1A: var1 = *idx0; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x60000000 /* 001C(291): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
-.long 0x024cf04d /* 0020(291): DRD2B1: var9 = EU3(); EU3(var1,var13) */
-.long 0x84980309 /* 0024(294): LCD: idx0 = var9; idx0 != var12; idx0 += inc1 */
-.long 0xc0004003 /* 0028(297): LCDEXT: idx1 = 0x00000003; ; */
-.long 0x81c60004 /* 002C(297): LCD: idx2 = var3 + var12 + 4; idx2 once var0; idx2 += inc0 */
-.long 0x70000000 /* 0030(299): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long 0x010cf04e /* 0034(299): DRD2B1: var4 = EU3(); EU3(var1,var14) */
-.long 0x70000000 /* 0038(300): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long 0x014cf04f /* 003C(300): DRD2B1: var5 = EU3(); EU3(var1,var15) */
-.long 0x70000000 /* 0040(301): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long 0x028cf050 /* 0044(301): DRD2B1: var10 = EU3(); EU3(var1,var16) */
-.long 0x70000000 /* 0048(302): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long 0x018cf051 /* 004C(302): DRD2B1: var6 = EU3(); EU3(var1,var17) */
-.long 0x10000b90 /* 0050(303): DRD1A: var2 = *idx2; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x60000000 /* 0054(304): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
-.long 0x01ccf0a1 /* 0058(304): DRD2B1: var7 = EU3(); EU3(var2,idx1) */
-.long 0xc2988312 /* 005C(308): LCDEXT: idx1 = var5; idx1 > var12; idx1 += inc2 */
-.long 0x83490000 /* 0060(308): LCD: idx2 = var6 + var18; idx2 once var0; idx2 += inc0 */
-.long 0x00001b10 /* 0064(310): DRD1A: var6 = idx2; FN=0 init=0 WS=0 RS=0 */
-.long 0x800251a4 /* 0068(315): LCDEXT: idx1 = 0xf00091a4; ; */
-.long 0xc30104dc /* 006C(315): LCDEXT: idx2 = var6, idx3 = var2; idx2 >= var19; idx2 += inc3, idx3 += inc4 */
-.long 0x839a032d /* 0070(316): LCD: idx4 = var7; idx4 == var12; idx4 += inc5 */
-.long 0x0220c798 /* 0074(321): DRD1A: *idx1 = *idx3; FN=0 init=17 WS=0 RS=0 */
-.long 0x800251a4 /* 0078(329): LCDEXT: idx1 = 0xf00091a4; ; */
-.long 0x99198337 /* 007C(329): LCD: idx2 = idx2, idx3 = idx3; idx2 > var12; idx2 += inc6, idx3 += inc7 */
-.long 0x022ac798 /* 0080(333): DRD1A: *idx1 = *idx3; FN=0 init=17 WS=1 RS=1 */
-.long 0x800251a4 /* 0084(350): LCDEXT: idx1 = 0xf00091a4; ; */
-.long 0xc1430000 /* 0088(350): LCDEXT: idx2 = var2 + var6; idx2 once var0; idx2 += inc0 */
-.long 0x82998312 /* 008C(351): LCD: idx3 = var5; idx3 > var12; idx3 += inc2 */
-.long 0x0a2ac790 /* 0090(354): DRD1A: *idx1 = *idx2; FN=0 TFD init=17 WS=1 RS=1 */
-.long 0x81988000 /* 0094(359): LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */
-.long 0x60000002 /* 0098(361): DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT init=0 WS=0 RS=0 */
-.long 0x0c4cfc4d /* 009C(361): DRD2B1: *idx1 = EU3(); EU3(*idx1,var13) */
-.long 0xc21883ad /* 00A0(365): LCDEXT: idx1 = var4; idx1 == var14; idx1 += inc5 */
-.long 0x80190000 /* 00A4(365): LCD: idx2 = var0; idx2 once var0; idx2 += inc0 */
-.long 0x04008460 /* 00A8(367): DRD1A: idx1 = var12; FN=0 INT init=0 WS=0 RS=0 */
-.long 0xc4052305 /* 00AC(371): LCDEXT: idx1 = var8, idx2 = var10; idx2 == var12; idx1 += inc0, idx2 += inc5 */
-.long 0x81ca0000 /* 00B0(372): LCD: idx3 = var3 + var20; idx3 once var0; idx3 += inc0 */
-.long 0x1000c718 /* 00B4(374): DRD1A: *idx1 = idx3; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x00000f18 /* 00B8(375): DRD1A: var3 = idx3; FN=0 init=0 WS=0 RS=0 */
-.long 0xc4188000 /* 00BC(378): LCDEXT: idx1 = var8; idx1 once var0; idx1 += inc0 */
-.long 0x85190312 /* 00C0(378): LCD: idx2 = var10; idx2 > var12; idx2 += inc2 */
-.long 0x10000c00 /* 00C4(380): DRD1A: var3 = var0; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x1000c400 /* 00C8(381): DRD1A: *idx1 = var0; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x00008860 /* 00CC(382): DRD1A: idx2 = var12; FN=0 init=0 WS=0 RS=0 */
-.long 0x81988000 /* 00D0(386): LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */
-.long 0x10000788 /* 00D4(388): DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x60000000 /* 00D8(389): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
-.long 0x080cf04d /* 00DC(389): DRD2B1: idx0 = EU3(); EU3(var1,var13) */
-.long 0x000001f8 /* 00E0(:0): NOP */
-
-.align 8
-
-.globl scEthernetRecv_VarTab
-scEthernetRecv_VarTab: /* Task 0 Variable Table */
-.long 0x00000000 /* var[0] */
-.long 0x00000000 /* var[1] */
-.long 0x00000000 /* var[2] */
-.long 0x00000000 /* var[3] */
-.long 0x00000000 /* var[4] */
-.long 0x00000000 /* var[5] */
-.long 0x00000000 /* var[6] */
-.long 0x00000000 /* var[7] */
-.long 0x00000000 /* var[8] */
-.long 0xf0025b00 /* var[9] */
-.long 0x00000008 /* var[10] */
-.long 0x0000000c /* var[11] */
-.long 0x80000000 /* var[12] */
-.long 0x00000000 /* var[13] */
-.long 0x10000000 /* var[14] */
-.long 0x20000000 /* var[15] */
-.long 0x00000800 /* var[16] */
-.long 0x00000001 /* var[17] */
-.long 0x00000000 /* var[18] */
-.long 0x00000000 /* var[19] */
-.long 0x00000000 /* var[20] */
-.long 0x00000000 /* var[21] */
-.long 0x00000000 /* var[22] */
-.long 0x00000000 /* var[23] */
-.long 0x00000000 /* inc[0] */
-.long 0x60000000 /* inc[1] */
-.long 0x20000004 /* inc[2] */
-.long 0x20000001 /* inc[3] */
-.long 0x80000000 /* inc[4] */
-.long 0x40000000 /* inc[5] */
-.long 0x00000000 /* inc[6] */
-.long 0x00000000 /* inc[7] */
-
-.align 8
-
-.globl scEthernetXmit_VarTab
-scEthernetXmit_VarTab: /* Task 1 Variable Table */
-.long 0x00000000 /* var[0] */
-.long 0x00000000 /* var[1] */
-.long 0x00000000 /* var[2] */
-.long 0x00000000 /* var[3] */
-.long 0x00000000 /* var[4] */
-.long 0x00000000 /* var[5] */
-.long 0x00000000 /* var[6] */
-.long 0x00000000 /* var[7] */
-.long 0x00000000 /* var[8] */
-.long 0x00000000 /* var[9] */
-.long 0x00000000 /* var[10] */
-.long 0xf0025b00 /* var[11] */
-.long 0x00000000 /* var[12] */
-.long 0x80000000 /* var[13] */
-.long 0x10000000 /* var[14] */
-.long 0x08000000 /* var[15] */
-.long 0x20000000 /* var[16] */
-.long 0x0000ffff /* var[17] */
-.long 0xffffffff /* var[18] */
-.long 0x00000004 /* var[19] */
-.long 0x00000008 /* var[20] */
-.long 0x00000000 /* var[21] */
-.long 0x00000000 /* var[22] */
-.long 0x00000000 /* var[23] */
-.long 0x00000000 /* inc[0] */
-.long 0x60000000 /* inc[1] */
-.long 0x40000000 /* inc[2] */
-.long 0xc000fffc /* inc[3] */
-.long 0xe0000004 /* inc[4] */
-.long 0x80000000 /* inc[5] */
-.long 0x4000ffff /* inc[6] */
-.long 0xe0000001 /* inc[7] */
-
-.align 8
-
-.globl scEthernetRecv_FDT
-scEthernetRecv_FDT: /* Task 0 Function Descriptor Table */
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x21800000 /* and(), EU# 3 */
-.long 0x21e00000 /* or(), EU# 3 */
-.long 0x21400000 /* andn(), EU# 3 */
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-
-.align 8
-
-.globl scEthernetXmit_FDT
-scEthernetXmit_FDT: /* Task 1 Function Descriptor Table */
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x21800000 /* and(), EU# 3 */
-.long 0x21e00000 /* or(), EU# 3 */
-.long 0x21400000 /* andn(), EU# 3 */
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-
-
-.globl scEthernetRecv_CSave
-scEthernetRecv_CSave: /* Task 0 context save space */
-.space 128, 0x0
-
-
-.globl scEthernetXmit_CSave
-scEthernetXmit_CSave: /* Task 1 context save space */
-.space 128, 0x0
-
-#endif
diff --git a/arch/powerpc/cpu/mpc8220/i2c.c b/arch/powerpc/cpu/mpc8220/i2c.c
deleted file mode 100644
index 2f35d20..0000000
--- a/arch/powerpc/cpu/mpc8220/i2c.c
+++ /dev/null
@@ -1,388 +0,0 @@
-/*
- * (C) Copyright 2004, Freescale, Inc
- * TsiChung Liew, Tsi-Chung.Liew@freescale.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_HARD_I2C
-
-#include <mpc8220.h>
-#include <i2c.h>
-
-typedef struct mpc8220_i2c {
- volatile u32 adr; /* I2Cn + 0x00 */
- volatile u32 fdr; /* I2Cn + 0x04 */
- volatile u32 cr; /* I2Cn + 0x08 */
- volatile u32 sr; /* I2Cn + 0x0C */
- volatile u32 dr; /* I2Cn + 0x10 */
-} i2c_t;
-
-/* I2Cn control register bits */
-#define I2C_EN 0x80
-#define I2C_IEN 0x40
-#define I2C_STA 0x20
-#define I2C_TX 0x10
-#define I2C_TXAK 0x08
-#define I2C_RSTA 0x04
-#define I2C_INIT_MASK (I2C_EN | I2C_STA | I2C_TX | I2C_RSTA)
-
-/* I2Cn status register bits */
-#define I2C_CF 0x80
-#define I2C_AAS 0x40
-#define I2C_BB 0x20
-#define I2C_AL 0x10
-#define I2C_SRW 0x04
-#define I2C_IF 0x02
-#define I2C_RXAK 0x01
-
-#define I2C_TIMEOUT 100
-#define I2C_RETRIES 1
-
-struct mpc8220_i2c_tap {
- int scl2tap;
- int tap2tap;
-};
-
-static int mpc_reg_in (volatile u32 * reg);
-static void mpc_reg_out (volatile u32 * reg, int val, int mask);
-static int wait_for_bb (void);
-static int wait_for_pin (int *status);
-static int do_address (uchar chip, char rdwr_flag);
-static int send_bytes (uchar chip, char *buf, int len);
-static int receive_bytes (uchar chip, char *buf, int len);
-static int mpc_get_fdr (int);
-
-static int mpc_reg_in (volatile u32 * reg)
-{
- int ret;
- ret = *reg >> 24;
- __asm__ __volatile__ ("eieio");
- return ret;
-}
-
-static void mpc_reg_out (volatile u32 * reg, int val, int mask)
-{
- int tmp;
-
- if (!mask) {
- *reg = val << 24;
- } else {
- tmp = mpc_reg_in (reg);
- *reg = ((tmp & ~mask) | (val & mask)) << 24;
- }
- __asm__ __volatile__ ("eieio");
-
- return;
-}
-
-static int wait_for_bb (void)
-{
- i2c_t *regs = (i2c_t *) MMAP_I2C;
- int timeout = I2C_TIMEOUT;
- int status;
-
- status = mpc_reg_in (®s->sr);
-
- while (timeout-- && (status & I2C_BB)) {
-
- mpc_reg_out (®s->cr, I2C_STA, I2C_STA);
- (void)mpc_reg_in (®s->dr);
- mpc_reg_out (®s->cr, 0, I2C_STA);
- mpc_reg_out (®s->cr, 0, 0);
- mpc_reg_out (®s->cr, I2C_EN, 0);
-
- udelay (1000);
- status = mpc_reg_in (®s->sr);
- }
-
- return (status & I2C_BB);
-}
-
-static int wait_for_pin (int *status)
-{
- i2c_t *regs = (i2c_t *) MMAP_I2C;
- int timeout = I2C_TIMEOUT;
-
- *status = mpc_reg_in (®s->sr);
-
- while (timeout-- && !(*status & I2C_IF)) {
- udelay (1000);
- *status = mpc_reg_in (®s->sr);
- }
-
- if (!(*status & I2C_IF)) {
- return -1;
- }
-
- mpc_reg_out (®s->sr, 0, I2C_IF);
- return 0;
-}
-
-static int do_address (uchar chip, char rdwr_flag)
-{
- i2c_t *regs = (i2c_t *) MMAP_I2C;
- int status;
-
- chip <<= 1;
-
- if (rdwr_flag)
- chip |= 1;
-
- mpc_reg_out (®s->cr, I2C_TX, I2C_TX);
- mpc_reg_out (®s->dr, chip, 0);
-
- if (wait_for_pin (&status))
- return -2;
- if (status & I2C_RXAK)
- return -3;
- return 0;
-}
-
-static int send_bytes (uchar chip, char *buf, int len)
-{
- i2c_t *regs = (i2c_t *) MMAP_I2C;
- int wrcount;
- int status;
-
- for (wrcount = 0; wrcount < len; ++wrcount) {
-
- mpc_reg_out (®s->dr, buf[wrcount], 0);
-
- if (wait_for_pin (&status))
- break;
-
- if (status & I2C_RXAK)
- break;
-
- }
-
- return !(wrcount == len);
- return 0;
-}
-
-static int receive_bytes (uchar chip, char *buf, int len)
-{
- i2c_t *regs = (i2c_t *) MMAP_I2C;
- int dummy = 1;
- int rdcount = 0;
- int status;
- int i;
-
- mpc_reg_out (®s->cr, 0, I2C_TX);
-
- for (i = 0; i < len; ++i) {
- buf[rdcount] = mpc_reg_in (®s->dr);
-
- if (dummy)
- dummy = 0;
- else
- rdcount++;
-
- if (wait_for_pin (&status))
- return -4;
- }
-
- mpc_reg_out (®s->cr, I2C_TXAK, I2C_TXAK);
- buf[rdcount++] = mpc_reg_in (®s->dr);
-
- if (wait_for_pin (&status))
- return -5;
-
- mpc_reg_out (®s->cr, 0, I2C_TXAK);
- return 0;
-}
-
-/**************** I2C API ****************/
-
-void i2c_init (int speed, int saddr)
-{
- i2c_t *regs = (i2c_t *) MMAP_I2C;
-
- mpc_reg_out (®s->cr, 0, 0);
- mpc_reg_out (®s->adr, saddr << 1, 0);
-
- /* Set clock
- */
- mpc_reg_out (®s->fdr, mpc_get_fdr (speed), 0);
-
- /* Enable module
- */
- mpc_reg_out (®s->cr, I2C_EN, I2C_INIT_MASK);
- mpc_reg_out (®s->sr, 0, I2C_IF);
- return;
-}
-
-static int mpc_get_fdr (int speed)
-{
- static int fdr = -1;
-
- if (fdr == -1) {
- ulong best_speed = 0;
- ulong divider;
- ulong ipb, scl;
- ulong bestmatch = 0xffffffffUL;
- int best_i = 0, best_j = 0, i, j;
- int SCL_Tap[] = { 9, 10, 12, 15, 5, 6, 7, 8 };
- struct mpc8220_i2c_tap scltap[] = {
- {4, 1},
- {4, 2},
- {6, 4},
- {6, 8},
- {14, 16},
- {30, 32},
- {62, 64},
- {126, 128}
- };
-
- ipb = gd->bus_clk;
- for (i = 7; i >= 0; i--) {
- for (j = 7; j >= 0; j--) {
- scl = 2 * (scltap[j].scl2tap +
- (SCL_Tap[i] -
- 1) * scltap[j].tap2tap + 2);
- if (ipb <= speed * scl) {
- if ((speed * scl - ipb) < bestmatch) {
- bestmatch = speed * scl - ipb;
- best_i = i;
- best_j = j;
- best_speed = ipb / scl;
- }
- }
- }
- }
- divider = (best_i & 3) | ((best_i & 4) << 3) | (best_j << 2);
- if (gd->flags & GD_FLG_RELOC) {
- fdr = divider;
- } else {
- printf ("%ld kHz, ", best_speed / 1000);
- return divider;
- }
- }
-
- return fdr;
-}
-
-int i2c_probe (uchar chip)
-{
- i2c_t *regs = (i2c_t *) MMAP_I2C;
- int i;
-
- for (i = 0; i < I2C_RETRIES; i++) {
- mpc_reg_out (®s->cr, I2C_STA, I2C_STA);
-
- if (!do_address (chip, 0)) {
- mpc_reg_out (®s->cr, 0, I2C_STA);
- break;
- }
-
- mpc_reg_out (®s->cr, 0, I2C_STA);
- udelay (50);
- }
-
- return (i == I2C_RETRIES);
-}
-
-int i2c_read (uchar chip, uint addr, int alen, uchar * buf, int len)
-{
- uchar xaddr[4];
- i2c_t *regs = (i2c_t *) MMAP_I2C;
- int ret = -1;
-
- xaddr[0] = (addr >> 24) & 0xFF;
- xaddr[1] = (addr >> 16) & 0xFF;
- xaddr[2] = (addr >> 8) & 0xFF;
- xaddr[3] = addr & 0xFF;
-
- if (wait_for_bb ()) {
- printf ("i2c_read: bus is busy\n");
- goto Done;
- }
-
- mpc_reg_out (®s->cr, I2C_STA, I2C_STA);
- if (do_address (chip, 0)) {
- printf ("i2c_read: failed to address chip\n");
- goto Done;
- }
-
- if (send_bytes (chip, (char *)&xaddr[4 - alen], alen)) {
- printf ("i2c_read: send_bytes failed\n");
- goto Done;
- }
-
- mpc_reg_out (®s->cr, I2C_RSTA, I2C_RSTA);
- if (do_address (chip, 1)) {
- printf ("i2c_read: failed to address chip\n");
- goto Done;
- }
-
- if (receive_bytes (chip, (char *)buf, len)) {
- printf ("i2c_read: receive_bytes failed\n");
- goto Done;
- }
-
- ret = 0;
- Done:
- mpc_reg_out (®s->cr, 0, I2C_STA);
- return ret;
-}
-
-int i2c_write (uchar chip, uint addr, int alen, uchar * buf, int len)
-{
- uchar xaddr[4];
- i2c_t *regs = (i2c_t *) MMAP_I2C;
- int ret = -1;
-
- xaddr[0] = (addr >> 24) & 0xFF;
- xaddr[1] = (addr >> 16) & 0xFF;
- xaddr[2] = (addr >> 8) & 0xFF;
- xaddr[3] = addr & 0xFF;
-
- if (wait_for_bb ()) {
- printf ("i2c_write: bus is busy\n");
- goto Done;
- }
-
- mpc_reg_out (®s->cr, I2C_STA, I2C_STA);
- if (do_address (chip, 0)) {
- printf ("i2c_write: failed to address chip\n");
- goto Done;
- }
-
- if (send_bytes (chip, (char *)&xaddr[4 - alen], alen)) {
- printf ("i2c_write: send_bytes failed\n");
- goto Done;
- }
-
- if (send_bytes (chip, (char *)buf, len)) {
- printf ("i2c_write: send_bytes failed\n");
- goto Done;
- }
-
- ret = 0;
- Done:
- mpc_reg_out (®s->cr, 0, I2C_STA);
- return ret;
-}
-
-#endif /* CONFIG_HARD_I2C */
diff --git a/arch/powerpc/cpu/mpc8220/i2cCore.c b/arch/powerpc/cpu/mpc8220/i2cCore.c
deleted file mode 100644
index b89ad03..0000000
--- a/arch/powerpc/cpu/mpc8220/i2cCore.c
+++ /dev/null
@@ -1,627 +0,0 @@
-/* I2cCore.c - MPC8220 PPC I2C Library */
-
-/* Copyright 2004 Freescale Semiconductor, Inc. */
-
-/*
-modification history
---------------------
-01c,29jun04,tcl 1.3 removed CR. Added two bytes offset support.
-01b,19jan04,tcl 1.2 removed i2cMsDelay and sysDecGet. renamed i2cMsDelay
- back to sysMsDelay
-01a,19jan04,tcl 1.1 created and seperated from i2c.c
-*/
-
-/*
-DESCRIPTION
-This file contain I2C low level handling library functions
-*/
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <vxWorks.h>
-#include <sysLib.h>
-#include <iosLib.h>
-#include <logLib.h>
-#include <tickLib.h>
-
-/* BSP Includes */
-#include "config.h"
-#include "mpc8220.h"
-#include "i2cCore.h"
-
-#ifdef DEBUG_I2CCORE
-int I2CCDbg = 0;
-#endif
-
-#define ABS(x) ((x < 0)? -x : x)
-
-char *I2CERR[16] = {
- "Transfer in Progress\n", /* 0 */
- "Transfer complete\n",
- "Not Addressed\n", /* 2 */
- "Addressed as a slave\n",
- "Bus is Idle\n", /* 4 */
- "Bus is busy\n",
- "Arbitration Lost\n", /* 6 */
- "Arbitration on Track\n",
- "Slave receive, master writing to slave\n", /* 8 */
- "Slave transmit, master reading from slave\n",
- "Interrupt is pending\n", /* 10 */
- "Interrupt complete\n",
- "Acknowledge received\n", /* 12 */
- "No acknowledge received\n",
- "Unknown status\n", /* 14 */
- "\n"
-};
-
-/******************************************************************************
- *
- * chk_status - Check I2C status bit
- *
- * RETURNS: OK, or ERROR if the bit encounter
- *
- */
-
-STATUS chk_status (PSI2C pi2c, UINT8 sta_bit, UINT8 truefalse)
-{
- int i, status = 0;
-
- for (i = 0; i < I2C_POLL_COUNT; i++) {
- if ((pi2c->sr & sta_bit) == (truefalse ? sta_bit : 0))
- return (OK);
- }
-
- I2CCDBG (L2, ("--- sr %x stabit %x truefalse %d\n",
- pi2c->sr, sta_bit, truefalse, 0, 0, 0));
-
- if (i == I2C_POLL_COUNT) {
- switch (sta_bit) {
- case I2C_STA_CF:
- status = 0;
- break;
- case I2C_STA_AAS:
- status = 2;
- break;
- case I2C_STA_BB:
- status = 4;
- break;
- case I2C_STA_AL:
- status = 6;
- break;
- case I2C_STA_SRW:
- status = 8;
- break;
- case I2C_STA_IF:
- status = 10;
- break;
- case I2C_STA_RXAK:
- status = 12;
- break;
- default:
- status = 14;
- break;
- }
-
- if (!truefalse)
- status++;
-
- I2CCDBG (NO, ("--- status %d\n", status, 0, 0, 0, 0, 0));
- I2CCDBG (NO, (I2CERR[status], 0, 0, 0, 0, 0, 0));
- }
-
- return (ERROR);
-}
-
-/******************************************************************************
- *
- * I2C Enable - Enable the I2C Controller
- *
- */
-STATUS i2c_enable (SI2C * pi2c, PI2CSET pi2cSet)
-{
- int fdr = pi2cSet->bit_rate;
- UINT8 adr = pi2cSet->i2c_adr;
-
- I2CCDBG (L2, ("i2c_enable fdr %d adr %x\n", fdr, adr, 0, 0, 0, 0));
-
- i2c_clear (pi2c); /* Clear FDR, ADR, SR and CR reg */
-
- SetI2cFDR (pi2c, fdr); /* Frequency */
- pi2c->adr = adr;
-
- pi2c->cr = I2C_CTL_EN; /* Set Enable */
-
- /*
- The I2C bus should be in Idle state. If the bus is busy,
- clear the STA bit in control register
- */
- if (chk_status (pi2c, I2C_STA_BB, 0) != OK) {
- if ((pi2c->cr & I2C_CTL_STA) == I2C_CTL_STA)
- pi2c->cr &= ~I2C_CTL_STA;
-
- /* Check again if it is still busy, return error if found */
- if (chk_status (pi2c, I2C_STA_BB, 1) == OK)
- return ERROR;
- }
-
- return (OK);
-}
-
-/******************************************************************************
- *
- * I2C Disable - Disable the I2C Controller
- *
- */
-STATUS i2c_disable (PSI2C pi2c)
-{
- i2c_clear (pi2c);
-
- pi2c->cr &= I2C_CTL_EN; /* Disable I2c */
-
- if ((pi2c->cr & I2C_CTL_STA) == I2C_CTL_STA)
- pi2c->cr &= ~I2C_CTL_STA;
-
- if (chk_status (pi2c, I2C_STA_BB, 0) != OK)
- return ERROR;
-
- return (OK);
-}
-
-/******************************************************************************
- *
- * I2C Clear - Clear the I2C Controller
- *
- */
-STATUS i2c_clear (PSI2C pi2c)
-{
- pi2c->adr = 0;
- pi2c->fdr = 0;
- pi2c->cr = 0;
- pi2c->sr = 0;
-
- return (OK);
-}
-
-
-STATUS i2c_start (PSI2C pi2c, PI2CSET pi2cSet)
-{
-#ifdef TWOBYTES
- UINT16 ByteOffset = pi2cSet->str_adr;
-#else
- UINT8 ByteOffset = pi2cSet->str_adr;
-#endif
-#if 1
- UINT8 tmp = 0;
-#endif
- UINT8 Addr = pi2cSet->slv_adr;
-
- pi2c->cr |= I2C_CTL_STA; /* Generate start signal */
-
- if (chk_status (pi2c, I2C_STA_BB, 1) != OK)
- return ERROR;
-
- /* Write slave address */
- if (i2c_writebyte (pi2c, &Addr) != OK) {
- i2c_stop (pi2c); /* Disable I2c */
- return ERROR;
- }
-#ifdef TWOBYTES
-# if 0
- /* Issue the offset to start */
- if (i2c_write2byte (pi2c, &ByteOffset) != OK) {
- i2c_stop (pi2c); /* Disable I2c */
- return ERROR;
- }
-#endif
- tmp = (ByteOffset >> 8) & 0xff;
- if (i2c_writebyte (pi2c, &tmp) != OK) {
- i2c_stop (pi2c); /* Disable I2c */
- return ERROR;
- }
- tmp = ByteOffset & 0xff;
- if (i2c_writebyte (pi2c, &tmp) != OK) {
- i2c_stop (pi2c); /* Disable I2c */
- return ERROR;
- }
-#else
- if (i2c_writebyte (pi2c, &ByteOffset) != OK) {
- i2c_stop (pi2c); /* Disable I2c */
- return ERROR;
- }
-#endif
-
- return (OK);
-}
-
-STATUS i2c_stop (PSI2C pi2c)
-{
- pi2c->cr &= ~I2C_CTL_STA; /* Generate stop signal */
- if (chk_status (pi2c, I2C_STA_BB, 0) != OK)
- return ERROR;
-
- return (OK);
-}
-
-/******************************************************************************
- *
- * Read Len bytes to the location pointed to by *Data from the device
- * with address Addr.
- */
-int i2c_readblock (SI2C * pi2c, PI2CSET pi2cSet, UINT8 * Data)
-{
- int i = 0;
- UINT8 Tmp;
-
-/* UINT8 ByteOffset = pi2cSet->str_adr; not used? */
- UINT8 Addr = pi2cSet->slv_adr;
- int Length = pi2cSet->xfer_size;
-
- I2CCDBG (L1, ("i2c_readblock addr %x data 0x%08x len %d offset %d\n",
- Addr, (int) Data, Length, ByteOffset, 0, 0));
-
- if (pi2c->sr & I2C_STA_AL) { /* Check if Arbitration lost */
- I2CCDBG (FN, ("Arbitration lost\n", 0, 0, 0, 0, 0, 0));
- pi2c->sr &= ~I2C_STA_AL; /* Clear Arbitration status bit */
- return ERROR;
- }
-
- pi2c->cr |= I2C_CTL_TX; /* Enable the I2c for TX, Ack */
-
- if (i2c_start (pi2c, pi2cSet) == ERROR)
- return ERROR;
-
- pi2c->cr |= I2C_CTL_RSTA; /* Repeat Start */
-
- Tmp = Addr | 1;
-
- if (i2c_writebyte (pi2c, &Tmp) != OK) {
- i2c_stop (pi2c); /* Disable I2c */
- return ERROR;
- }
-
- if (((pi2c->sr & 0x07) == 0x07) || (pi2c->sr & 0x01))
- return ERROR;
-
- pi2c->cr &= ~I2C_CTL_TX; /* Set receive mode */
-
- if (((pi2c->sr & 0x07) == 0x07) || (pi2c->sr & 0x01))
- return ERROR;
-
- /* Dummy Read */
- if (i2c_readbyte (pi2c, &Tmp, &i) != OK) {
- i2c_stop (pi2c); /* Disable I2c */
- return ERROR;
- }
-
- i = 0;
- while (Length) {
- if (Length == 2)
- pi2c->cr |= I2C_CTL_TXAK;
-
- if (Length == 1)
- pi2c->cr &= ~I2C_CTL_STA;
-
- if (i2c_readbyte (pi2c, Data, &Length) != OK) {
- return i2c_stop (pi2c);
- }
- i++;
- Length--;
- Data++;
- }
-
- if (i2c_stop (pi2c) == ERROR)
- return ERROR;
-
- return i;
-}
-
-STATUS i2c_writeblock (SI2C * pi2c, PI2CSET pi2cSet, UINT8 * Data)
-{
- int Length = pi2cSet->xfer_size;
-
-#ifdef TWOBYTES
- UINT16 ByteOffset = pi2cSet->str_adr;
-#else
- UINT8 ByteOffset = pi2cSet->str_adr;
-#endif
- int j, k;
-
- I2CCDBG (L2, ("i2c_writeblock\n", 0, 0, 0, 0, 0, 0));
-
- if (pi2c->sr & I2C_STA_AL) {
- /* Check if arbitration lost */
- I2CCDBG (L2, ("Arbitration lost\n", 0, 0, 0, 0, 0, 0));
- pi2c->sr &= ~I2C_STA_AL; /* Clear the condition */
- return ERROR;
- }
-
- pi2c->cr |= I2C_CTL_TX; /* Enable the I2c for TX, Ack */
-
- /* Do the not even offset first */
- if ((ByteOffset % 8) != 0) {
- int remain;
-
- if (Length > 8) {
- remain = 8 - (ByteOffset % 8);
- Length -= remain;
-
- pi2cSet->str_adr = ByteOffset;
-
- if (i2c_start (pi2c, pi2cSet) == ERROR)
- return ERROR;
-
- for (j = ByteOffset; j < remain; j++) {
- if (i2c_writebyte (pi2c, Data++) != OK)
- return ERROR;
- }
-
- if (i2c_stop (pi2c) == ERROR)
- return ERROR;
-
- sysMsDelay (32);
-
- /* Update the new ByteOffset */
- ByteOffset += remain;
- }
- }
-
- for (j = ByteOffset, k = 0; j < (Length + ByteOffset); j++) {
- if ((j % 8) == 0) {
- pi2cSet->str_adr = j;
- if (i2c_start (pi2c, pi2cSet) == ERROR)
- return ERROR;
- }
-
- k++;
-
- if (i2c_writebyte (pi2c, Data++) != OK)
- return ERROR;
-
- if ((j == (Length - 1)) || ((k % 8) == 0)) {
- if (i2c_stop (pi2c) == ERROR)
- return ERROR;
-
- sysMsDelay (50);
- }
-
- }
-
- return k;
-}
-
-STATUS i2c_readbyte (SI2C * pi2c, UINT8 * readb, int *index)
-{
- pi2c->sr &= ~I2C_STA_IF; /* Clear Interrupt Bit */
- *readb = pi2c->dr; /* Read a byte */
-
- /*
- Set I2C_CTRL_TXAK will cause Transfer pending and
- set I2C_CTRL_STA will cause Interrupt pending
- */
- if (*index != 2) {
- if (chk_status (pi2c, I2C_STA_CF, 1) != OK) /* Transfer not complete? */
- return ERROR;
- }
-
- if (*index != 1) {
- if (chk_status (pi2c, I2C_STA_IF, 1) != OK)
- return ERROR;
- }
-
- return (OK);
-}
-
-
-STATUS i2c_writebyte (SI2C * pi2c, UINT8 * writeb)
-{
- pi2c->sr &= ~I2C_STA_IF; /* Clear Interrupt */
- pi2c->dr = *writeb; /* Write a byte */
-
- if (chk_status (pi2c, I2C_STA_CF, 1) != OK) /* Transfer not complete? */
- return ERROR;
-
- if (chk_status (pi2c, I2C_STA_IF, 1) != OK)
- return ERROR;
-
- return OK;
-}
-
-STATUS i2c_write2byte (SI2C * pi2c, UINT16 * writeb)
-{
- UINT8 data;
-
- data = (UINT8) ((*writeb >> 8) & 0xff);
- if (i2c_writebyte (pi2c, &data) != OK)
- return ERROR;
- data = (UINT8) (*writeb & 0xff);
- if (i2c_writebyte (pi2c, &data) != OK)
- return ERROR;
- return OK;
-}
-
-/* FDR table base on 33MHz - more detail please refer to Odini2c_dividers.xls
-FDR FDR scl sda scl2tap2
-510 432 tap tap tap tap scl_per sda_hold I2C Freq 0 1 2 3 4 5
-000 000 9 3 4 1 28 Clocks 9 Clocks 1190 KHz 0 0 0 0 0 0
-000 001 9 3 4 2 44 Clocks 11 Clocks 758 KHz 0 0 1 0 0 0
-000 010 9 3 6 4 80 Clocks 17 Clocks 417 KHz 0 0 0 1 0 0
-000 011 9 3 6 8 144 Clocks 25 Clocks 231 KHz 0 0 1 1 0 0
-000 100 9 3 14 16 288 Clocks 49 Clocks 116 KHz 0 0 0 0 1 0
-000 101 9 3 30 32 576 Clocks 97 Clocks 58 KHz 0 0 1 0 1 0
-000 110 9 3 62 64 1152 Clocks 193 Clocks 29 KHz 0 0 0 1 1 0
-000 111 9 3 126 128 2304 Clocks 385 Clocks 14 KHz 0 0 1 1 1 0
-001 000 10 3 4 1 30 Clocks 9 Clocks 1111 KHz1 0 0 0 0 0
-001 001 10 3 4 2 48 Clocks 11 Clocks 694 KHz 1 0 1 0 0 0
-001 010 10 3 6 4 88 Clocks 17 Clocks 379 KHz 1 0 0 1 0 0
-001 011 10 3 6 8 160 Clocks 25 Clocks 208 KHz 1 0 1 1 0 0
-001 100 10 3 14 16 320 Clocks 49 Clocks 104 KHz 1 0 0 0 1 0
-001 101 10 3 30 32 640 Clocks 97 Clocks 52 KHz 1 0 1 0 1 0
-001 110 10 3 62 64 1280 Clocks 193 Clocks 26 KHz 1 0 0 1 1 0
-001 111 10 3 126 128 2560 Clocks 385 Clocks 13 KHz 1 0 1 1 1 0
-010 000 12 4 4 1 34 Clocks 10 Clocks 980 KHz 0 1 0 0 0 0
-010 001 12 4 4 2 56 Clocks 13 Clocks 595 KHz 0 1 1 0 0 0
-010 010 12 4 6 4 104 Clocks 21 Clocks 321 KHz 0 1 0 1 0 0
-010 011 12 4 6 8 192 Clocks 33 Clocks 174 KHz 0 1 1 1 0 0
-010 100 12 4 14 16 384 Clocks 65 Clocks 87 KHz 0 1 0 0 1 0
-010 101 12 4 30 32 768 Clocks 129 Clocks 43 KHz 0 1 1 0 1 0
-010 110 12 4 62 64 1536 Clocks 257 Clocks 22 KHz 0 1 0 1 1 0
-010 111 12 4 126 128 3072 Clocks 513 Clocks 11 KHz 0 1 1 1 1 0
-011 000 15 4 4 1 40 Clocks 10 Clocks 833 KHz 1 1 0 0 0 0
-011 001 15 4 4 2 68 Clocks 13 Clocks 490 KHz 1 1 1 0 0 0
-011 010 15 4 6 4 128 Clocks 21 Clocks 260 KHz 1 1 0 1 0 0
-011 011 15 4 6 8 240 Clocks 33 Clocks 139 KHz 1 1 1 1 0 0
-011 100 15 4 14 16 480 Clocks 65 Clocks 69 KHz 1 1 0 0 1 0
-011 101 15 4 30 32 960 Clocks 129 Clocks 35 KHz 1 1 1 0 1 0
-011 110 15 4 62 64 1920 Clocks 257 Clocks 17 KHz 1 1 0 1 1 0
-011 111 15 4 126 128 3840 Clocks 513 Clocks 9 KHz 1 1 1 1 1 0
-100 000 5 1 4 1 20 Clocks 7 Clocks 1667 KHz 0 0 0 0 0 1
-100 001 5 1 4 2 28 Clocks 7 Clocks 1190 KHz 0 0 1 0 0 1
-100 010 5 1 6 4 48 Clocks 9 Clocks 694 KHz 0 0 0 1 0 1
-100 011 5 1 6 8 80 Clocks 9 Clocks 417 KHz 0 0 1 1 0 1
-100 100 5 1 14 16 160 Clocks 17 Clocks 208 KHz 0 0 0 0 1 1
-100 101 5 1 30 32 320 Clocks 33 Clocks 104 KHz 0 0 1 0 1 1
-100 110 5 1 62 64 640 Clocks 65 Clocks 52 KHz 0 0 0 1 1 1
-100 111 5 1 126 128 1280 Clocks 129 Clocks 26 KHz 0 0 1 1 1 1
-101 000 6 1 4 1 22 Clocks 7 Clocks 1515 KHz 1 0 0 0 0 1
-101 001 6 1 4 2 32 Clocks 7 Clocks 1042 KHz 1 0 1 0 0 1
-101 010 6 1 6 4 56 Clocks 9 Clocks 595 KHz 1 0 0 1 0 1
-101 011 6 1 6 8 96 Clocks 9 Clocks 347 KHz 1 0 1 1 0 1
-101 100 6 1 14 16 192 Clocks 17 Clocks 174 KHz 1 0 0 0 1 1
-101 101 6 1 30 32 384 Clocks 33 Clocks 87 KHz 1 0 1 0 1 1
-101 110 6 1 62 64 768 Clocks 65 Clocks 43 KHz 1 0 0 1 1 1
-101 111 6 1 126 128 1536 Clocks 129 Clocks 22 KHz 1 0 1 1 1 1
-110 000 7 2 4 1 24 Clocks 8 Clocks 1389 KHz 0 1 0 0 0 1
-110 001 7 2 4 2 36 Clocks 9 Clocks 926 KHz 0 1 1 0 0 1
-110 010 7 2 6 4 64 Clocks 13 Clocks 521 KHz 0 1 0 1 0 1
-110 011 7 2 6 8 112 Clocks 17 Clocks 298 KHz 0 1 1 1 0 1
-110 100 7 2 14 16 224 Clocks 33 Clocks 149 KHz 0 1 0 0 1 1
-110 101 7 2 30 32 448 Clocks 65 Clocks 74 KHz 0 1 1 0 1 1
-110 110 7 2 62 64 896 Clocks 129 Clocks 37 KHz 0 1 0 1 1 1
-110 111 7 2 126 128 1792 Clocks 257 Clocks 19 KHz 0 1 1 1 1 1
-111 000 8 2 4 1 26 Clocks 8 Clocks 1282 KHz 1 1 0 0 0 1
-111 001 8 2 4 2 40 Clocks 9 Clocks 833 KHz 1 1 1 0 0 1
-111 010 8 2 6 4 72 Clocks 13 Clocks 463 KHz 1 1 0 1 0 1
-111 011 8 2 6 8 128 Clocks 17 Clocks 260 KHz 1 1 1 1 0 1
-111 100 8 2 14 16 256 Clocks 33 Clocks 130 KHz 1 1 0 0 1 1
-111 101 8 2 30 32 512 Clocks 65 Clocks 65 KHz 1 1 1 0 1 1
-111 110 8 2 62 64 1024 Clocks 129 Clocks 33 KHz 1 1 0 1 1 1
-111 111 8 2 126 128 2048 Clocks 257 Clocks 16 KHz 1 1 1 1 1 1
-*/
-STATUS SetI2cFDR (PSI2C pi2cRegs, int bitrate)
-{
-/* Constants */
- const UINT8 div_hold[8][3] = { {9, 3}, {10, 3},
- {12, 4}, {15, 4},
- {5, 1}, {6, 1},
- {7, 2}, {8, 2}
- };
-
- const UINT8 scl_tap[8][2] = { {4, 1}, {4, 2},
- {6, 4}, {6, 8},
- {14, 16}, {30, 32},
- {62, 64}, {126, 128}
- };
-
- UINT8 mfdr_bits;
-
- int i = 0;
- int j = 0;
-
- int Diff, min;
- int WhichFreq, iRec, jRec;
- int SCL_Period;
- int SCL_Hold;
- int I2C_Freq;
-
- I2CCDBG (L2, ("Entering getBitRate: bitrate %d pi2cRegs 0x%08x\n",
- bitrate, (int) pi2cRegs, 0, 0, 0, 0));
-
- if (bitrate < 0) {
- I2CCDBG (NO, ("Invalid bitrate\n", 0, 0, 0, 0, 0, 0));
- return ERROR;
- }
-
- /* Initialize */
- mfdr_bits = 0;
- min = 0x7fffffff;
- WhichFreq = iRec = jRec = 0;
-
- for (i = 0; i < 8; i++) {
- for (j = 0; j < 8; j++) {
- /* SCL Period = 2 * (scl2tap + [(SCL_Tap - 1) * tap2tap] + 2)
- * SCL Hold = scl2tap + ((SDA_Tap - 1) * tap2tap) + 3
- * Bit Rate (I2C Freq) = System Freq / SCL Period
- */
- SCL_Period =
- 2 * (scl_tap[i][0] +
- ((div_hold[j][0] - 1) * scl_tap[i][1]) +
- 2);
-
- /* Now get the I2C Freq */
- I2C_Freq = DEV_CLOCK_FREQ / SCL_Period;
-
- /* Take equal or slower */
- if (I2C_Freq > bitrate)
- continue;
-
- /* Take the differences */
- Diff = I2C_Freq - bitrate;
-
- Diff = ABS (Diff);
-
- /* Find the closer value */
- if (Diff < min) {
- min = Diff;
- WhichFreq = I2C_Freq;
- iRec = i;
- jRec = j;
- }
-
- I2CCDBG (L2,
- ("--- (%d,%d) I2C_Freq %d minDiff %d min %d\n",
- i, j, I2C_Freq, Diff, min, 0));
- }
- }
-
- SCL_Period =
- 2 * (scl_tap[iRec][0] +
- ((div_hold[jRec][0] - 1) * scl_tap[iRec][1]) + 2);
-
- I2CCDBG (L2, ("\nmin %d WhichFreq %d iRec %d jRec %d\n",
- min, WhichFreq, iRec, jRec, 0, 0));
- I2CCDBG (L2, ("--- scl2tap %d SCL_Tap %d tap2tap %d\n",
- scl_tap[iRec][0], div_hold[jRec][0], scl_tap[iRec][1],
- 0, 0, 0));
-
- /* This may no require */
- SCL_Hold =
- scl_tap[iRec][0] +
- ((div_hold[jRec][1] - 1) * scl_tap[iRec][1]) + 3;
- I2CCDBG (L2,
- ("--- SCL_Period %d SCL_Hold %d\n", SCL_Period, SCL_Hold, 0,
- 0, 0, 0));
-
- I2CCDBG (L2, ("--- mfdr_bits %x\n", mfdr_bits, 0, 0, 0, 0, 0));
-
- /* FDR 4,3,2 */
- if ((iRec & 1) == 1)
- mfdr_bits |= 0x04; /* FDR 2 */
- if ((iRec & 2) == 2)
- mfdr_bits |= 0x08; /* FDR 3 */
- if ((iRec & 4) == 4)
- mfdr_bits |= 0x10; /* FDR 4 */
- /* FDR 5,1,0 */
- if ((jRec & 1) == 1)
- mfdr_bits |= 0x01; /* FDR 0 */
- if ((jRec & 2) == 2)
- mfdr_bits |= 0x02; /* FDR 1 */
- if ((jRec & 4) == 4)
- mfdr_bits |= 0x20; /* FDR 5 */
-
- I2CCDBG (L2, ("--- mfdr_bits %x\n", mfdr_bits, 0, 0, 0, 0, 0));
-
- pi2cRegs->fdr = mfdr_bits;
-
- return OK;
-}
diff --git a/arch/powerpc/cpu/mpc8220/i2cCore.h b/arch/powerpc/cpu/mpc8220/i2cCore.h
deleted file mode 100644
index 72783fd..0000000
--- a/arch/powerpc/cpu/mpc8220/i2cCore.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * i2cCore.h
- *
- * Prototypes, etc. for the Motorola MPC8220
- * embedded cpu chips
- *
- * 2004 (c) Freescale, Inc.
- * Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#ifndef __INCi2ccoreh
-#define __INCi2ccoreh
-#ifndef __ASSEMBLY__
-/* device types */
-#define I2C_DEVICE_TYPE_EEPROM 0
-#define I2C_EEPROM_ADRS 0xa0
-#define I2C_CTRL_ADRS I2C_EEPROM_ADRS
-#define EEPROM_ADDR0 0xA2 /* on Dimm SPD eeprom */
-#define EEPROM_ADDR1 0xA4 /* on Board SPD eeprom */
-#define EEPROM_ADDR2 0xD2 /* non-standard eeprom - clock generator */
-/* Control Register */
-#define I2C_CTL_EN 0x80 /* I2C Enable */
-#define I2C_CTL_IEN 0x40 /* I2C Interrupt Enable */
-#define I2C_CTL_STA 0x20 /* Master/Slave Mode select */
-#define I2C_CTL_TX 0x10 /* Transmit/Receive Mode Select */
-#define I2C_CTL_TXAK 0x08 /* Transmit Acknowledge Enable */
-#define I2C_CTL_RSTA 0x04 /* Repeat Start */
-/* Status Register */
-#define I2C_STA_CF 0x80 /* Data Transfer */
-#define I2C_STA_AAS 0x40 /* Adressed As Slave */
-#define I2C_STA_BB 0x20 /* Bus Busy */
-#define I2C_STA_AL 0x10 /* Arbitration Lost */
-#define I2C_STA_SRW 0x04 /* Slave Read/Write */
-#define I2C_STA_IF 0x02 /* I2C Interrupt */
-#define I2C_STA_RXAK 0x01 /* Receive Acknowledge */
-/* Interrupt Contol Register */
-#define I2C_INT_BNBE2 0x80 /* Bus Not Busy Enable 2 */
-#define I2C_INT_TE2 0x40 /* Transmit Enable 2 */
-#define I2C_INT_RE2 0x20 /* Receive Enable 2 */
-#define I2C_INT_IE2 0x10 /* Interrupt Enable 2 */
-#define I2C_INT_BNBE1 0x08 /* Bus Not Busy Enable 1 */
-#define I2C_INT_TE1 0x04 /* Transmit Enable 1 */
-#define I2C_INT_RE1 0x02 /* Receive Enable 1 */
-#define I2C_INT_IE1 0x01 /* Interrupt Enable 1 */
-#define I2C_POLL_COUNT 0x100000
-#define I2C_ENABLE 0x00000001
-#define I2C_DISABLE 0x00000002
-#define I2C_START 0x00000004
-#define I2C_REPSTART 0x00000008
-#define I2C_STOP 0x00000010
-#define I2C_BITRATE 0x00000020
-#define I2C_SLAVEADR 0x00000040
-#define I2C_STARTADR 0x00000080
-#undef TWOBYTES
-typedef struct i2c_settings {
- /* Device settings */
- int bit_rate; /* Device bit rate */
- u8 i2c_adr; /* I2C address */
- u8 slv_adr; /* Slave address */
-#ifdef TWOBYTES
- u16 str_adr; /* Start address */
-#else
- u8 str_adr; /* Start address */
-#endif
- int xfer_size; /* Transfer Size */
-
- int bI2c_en; /* Enable or Disable */
- int cmdFlag; /* I2c Command Flags */
-} i2cset_t;
-
-/*
-int check_status(PSI2C pi2c, u8 sta_bit, u8 truefalse);
-int i2c_enable(PSI2C pi2c, PI2CSET pi2cSet);
-int i2c_disable(PSI2C pi2c);
-int i2c_start(PSI2C pi2c, PI2CSET pi2cSet);
-int i2c_stop(PSI2C pi2c);
-int i2c_clear(PSI2C pi2c);
-int i2c_readblock (PSI2C pi2c, PI2CSET pi2cSet, u8 *Data);
-int i2c_writeblock (PSI2C pi2c, PI2CSET pi2cSet, u8 *Data);
-int i2c_readbyte(PSI2C pi2c, u8 *readb, int *index);
-int i2c_writebyte(PSI2C pi2c, u8 *writeb);
-int SetI2cFDR( PSI2C pi2cRegs, int bitrate );
-*/
-#endif /* __ASSEMBLY__ */
-
-#endif /* __INCi2ccoreh */
diff --git a/arch/powerpc/cpu/mpc8220/interrupts.c b/arch/powerpc/cpu/mpc8220/interrupts.c
deleted file mode 100644
index 9544d85..0000000
--- a/arch/powerpc/cpu/mpc8220/interrupts.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * (C) Copyright -2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * interrupts.c - just enough support for the decrementer/timer
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <command.h>
-
-int interrupt_init_cpu (ulong * decrementer_count)
-{
- *decrementer_count = get_tbclk () / CONFIG_SYS_HZ;
-
- return (0);
-}
-
-/****************************************************************************/
-
-/*
- * Handle external interrupts
- */
-void external_interrupt (struct pt_regs *regs)
-{
- puts ("external_interrupt (oops!)\n");
-}
-
-void timer_interrupt_cpu (struct pt_regs *regs)
-{
- /* nothing to do here */
- return;
-}
-
-/****************************************************************************/
-
-/*
- * Install and free a interrupt handler.
- */
-
-void irq_install_handler (int vec, interrupt_handler_t * handler, void *arg)
-{
-
-}
-
-void irq_free_handler (int vec)
-{
-
-}
-
-/****************************************************************************/
-
-void
-do_irqinfo (cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char * const argv[])
-{
- puts ("IRQ related functions are unimplemented currently.\n");
-}
diff --git a/arch/powerpc/cpu/mpc8220/io.S b/arch/powerpc/cpu/mpc8220/io.S
deleted file mode 100644
index 5ecdf55..0000000
--- a/arch/powerpc/cpu/mpc8220/io.S
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
- * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
- * Copyright (C) 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Andreas Heppel <aheppel@sysgo.de>
- * Copyright (C) 2003 Wolfgang Denk <wd@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <ppc_asm.tmpl>
-
-/* ------------------------------------------------------------------------------- */
-/* Function: in8 */
-/* Description: Input 8 bits */
-/* ------------------------------------------------------------------------------- */
- .globl in8
-in8:
- lbz r3,0(r3)
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: in16 */
-/* Description: Input 16 bits */
-/* ------------------------------------------------------------------------------- */
- .globl in16
-in16:
- lhz r3,0(r3)
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: in16r */
-/* Description: Input 16 bits and byte reverse */
-/* ------------------------------------------------------------------------------- */
- .globl in16r
-in16r:
- lhbrx r3,0,r3
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: in32 */
-/* Description: Input 32 bits */
-/* ------------------------------------------------------------------------------- */
- .globl in32
-in32:
- lwz 3,0(3)
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: in32r */
-/* Description: Input 32 bits and byte reverse */
-/* ------------------------------------------------------------------------------- */
- .globl in32r
-in32r:
- lwbrx r3,0,r3
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: out8 */
-/* Description: Output 8 bits */
-/* ------------------------------------------------------------------------------- */
- .globl out8
-out8:
- stb r4,0(r3)
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: out16 */
-/* Description: Output 16 bits */
-/* ------------------------------------------------------------------------------- */
- .globl out16
-out16:
- sth r4,0(r3)
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: out16r */
-/* Description: Byte reverse and output 16 bits */
-/* ------------------------------------------------------------------------------- */
- .globl out16r
-out16r:
- sthbrx r4,0,r3
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: out32 */
-/* Description: Output 32 bits */
-/* ------------------------------------------------------------------------------- */
- .globl out32
-out32:
- stw r4,0(r3)
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: out32r */
-/* Description: Byte reverse and output 32 bits */
-/* ------------------------------------------------------------------------------- */
- .globl out32r
-out32r:
- stwbrx r4,0,r3
- sync
- blr
diff --git a/arch/powerpc/cpu/mpc8220/loadtask.c b/arch/powerpc/cpu/mpc8220/loadtask.c
deleted file mode 100644
index 6d8b627..0000000
--- a/arch/powerpc/cpu/mpc8220/loadtask.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * This file is based on code
- * (C) Copyright Motorola, Inc., 2000
- */
-
-#include <common.h>
-#include <mpc8220.h>
-
-/* Multichannel DMA microcode */
-extern int taskTable;
-
-void loadtask (int basetask, int tasks)
-{
- int *sram = (int *) (MMAP_SRAM + 512);
- int *task_org = &taskTable;
- unsigned int start, offset, end;
- int i;
-
-#ifdef DEBUG
- printf ("basetask = %d, tasks = %d\n", basetask, tasks);
- printf ("task_org = 0x%08x\n", (unsigned int) task_org);
-#endif
-
- /* setup TaskBAR register */
- *(vu_long *) MMAP_DMA = (MMAP_SRAM + 512);
-
- /* relocate task table entries */
- offset = (unsigned int) sram;
- for (i = basetask; i < basetask + tasks; i++) {
- sram[i * 8 + 0] = task_org[i * 8 + 0] + offset;
- sram[i * 8 + 1] = task_org[i * 8 + 1] + offset;
- sram[i * 8 + 2] = task_org[i * 8 + 2] + offset;
- sram[i * 8 + 3] = task_org[i * 8 + 3] + offset;
- sram[i * 8 + 4] = task_org[i * 8 + 4];
- sram[i * 8 + 5] = task_org[i * 8 + 5];
- sram[i * 8 + 6] = task_org[i * 8 + 6] + offset;
- sram[i * 8 + 7] = task_org[i * 8 + 7];
- }
-
- /* relocate task descriptors */
- start = (sram[basetask * 8] - (unsigned int) sram);
- end = (sram[(basetask + tasks - 1) * 8 + 1] - (unsigned int) sram);
-
-#ifdef DEBUG
- printf ("TDT start = 0x%08x, end = 0x%08x\n", start, end);
-#endif
-
- start /= 4;
- end /= 4;
- for (i = start; i <= end; i++) {
- sram[i] = task_org[i];
- }
-
- /* relocate variables */
- start = (sram[basetask * 8 + 2] - (unsigned int) sram);
- end = (sram[(basetask + tasks - 1) * 8 + 2] + 256 -
- (unsigned int) sram);
- start /= 4;
- end /= 4;
- for (i = start; i < end; i++) {
- sram[i] = task_org[i];
- }
-
- /* relocate function decriptors */
- start = ((sram[basetask * 8 + 3] & 0xfffffffc) - (unsigned int) sram);
- end = ((sram[(basetask + tasks - 1) * 8 + 3] & 0xfffffffc) + 256 -
- (unsigned int) sram);
- start /= 4;
- end /= 4;
- for (i = start; i < end; i++) {
- sram[i] = task_org[i];
- }
-
- asm volatile ("sync");
-}
diff --git a/arch/powerpc/cpu/mpc8220/pci.c b/arch/powerpc/cpu/mpc8220/pci.c
deleted file mode 100644
index 7ef43b7..0000000
--- a/arch/powerpc/cpu/mpc8220/pci.c
+++ /dev/null
@@ -1,191 +0,0 @@
-/*
- * Copyright 2004 Freescale Semiconductor.
- * Copyright (C) 2003 Motorola Inc.
- * Xianghua Xiao (x.xiao@motorola.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * PCI Configuration space access support for MPC8220 PCI Bridge
- */
-#include <common.h>
-#include <mpc8220.h>
-#include <pci.h>
-#include <asm/io.h>
-
-#if defined(CONFIG_PCI)
-
-/* System RAM mapped over PCI */
-#define CONFIG_PCI_SYS_MEM_BUS CONFIG_SYS_SDRAM_BASE
-#define CONFIG_PCI_SYS_MEM_PHYS CONFIG_SYS_SDRAM_BASE
-#define CONFIG_PCI_SYS_MEM_SIZE (1024 * 1024 * 1024)
-
-#define cfg_read(val, addr, type, op) *val = op((type)(addr));
-#define cfg_write(val, addr, type, op) op((type *)(addr), (val));
-
-#define PCI_OP(rw, size, type, op, mask) \
-int mpc8220_pci_##rw##_config_##size(struct pci_controller *hose, \
- pci_dev_t dev, int offset, type val) \
-{ \
- u32 addr = 0; \
- u16 cfg_type = 0; \
- addr = ((offset & 0xfc) | cfg_type | (dev) | 0x80000000); \
- out_be32(hose->cfg_addr, addr); \
- __asm__ __volatile__("sync"); \
- cfg_##rw(val, hose->cfg_data + (offset & mask), type, op); \
- out_be32(hose->cfg_addr, addr & 0x7fffffff); \
- __asm__ __volatile__("sync"); \
- return 0; \
-}
-
-PCI_OP(read, byte, u8 *, in_8, 3)
-PCI_OP(read, word, u16 *, in_le16, 2)
-PCI_OP(write, byte, u8, out_8, 3)
-PCI_OP(write, word, u16, out_le16, 2)
-PCI_OP(write, dword, u32, out_le32, 0)
-
-int mpc8220_pci_read_config_dword(struct pci_controller *hose, pci_dev_t dev,
- int offset, u32 *val)
-{
- u32 addr;
- u32 tmpv;
- u32 mask = 2; /* word access */
- /* Read lower 16 bits */
- addr = ((offset & 0xfc) | (dev) | 0x80000000);
- out_be32(hose->cfg_addr, addr);
- __asm__ __volatile__("sync");
- *val = (u32) in_le16((u16 *) (hose->cfg_data + (offset & mask)));
- out_be32(hose->cfg_addr, addr & 0x7fffffff);
- __asm__ __volatile__("sync");
-
- /* Read upper 16 bits */
- offset += 2;
- addr = ((offset & 0xfc) | 1 | (dev) | 0x80000000);
- out_be32(hose->cfg_addr, addr);
- __asm__ __volatile__("sync");
- tmpv = (u32) in_le16((u16 *) (hose->cfg_data + (offset & mask)));
- out_be32(hose->cfg_addr, addr & 0x7fffffff);
- __asm__ __volatile__("sync");
-
- /* combine results into dword value */
- *val = (tmpv << 16) | *val;
-
- return 0;
-}
-
-void
-pci_mpc8220_init(struct pci_controller *hose)
-{
- u32 win0, win1, win2;
- volatile mpc8220_xcpci_t *xcpci =
- (volatile mpc8220_xcpci_t *) MMAP_XCPCI;
-
- volatile pcfg8220_t *portcfg = (volatile pcfg8220_t *) MMAP_PCFG;
-
- win0 = (u32) CONFIG_PCI_MEM_PHYS;
- win1 = (u32) CONFIG_PCI_IO_PHYS;
- win2 = (u32) CONFIG_PCI_CFG_PHYS;
-
- /* Assert PCI reset */
- out_be32 (&xcpci->glb_stat_ctl, PCI_GLB_STAT_CTRL_PR);
-
- /* Disable prefetching but read-multiples will still prefetch */
- out_be32 (&xcpci->target_ctrl, 0x00000000);
-
- /* Initiator windows */
- out_be32 (&xcpci->init_win0, (win0 >> 16) | win0 | 0x003f0000);
- out_be32 (&xcpci->init_win1, ((win1 >> 16) | win1 ));
- out_be32 (&xcpci->init_win2, ((win2 >> 16) | win2 ));
-
- out_be32 (&xcpci->init_win_cfg,
- PCI_INIT_WIN_CFG_WIN0_CTRL_EN |
- PCI_INIT_WIN_CFG_WIN1_CTRL_EN | PCI_INIT_WIN_CFG_WIN1_CTRL_IO |
- PCI_INIT_WIN_CFG_WIN2_CTRL_EN | PCI_INIT_WIN_CFG_WIN2_CTRL_IO);
-
- out_be32 (&xcpci->init_ctrl, 0x00000000);
-
- /* Enable bus master and mem access */
- out_be32 (&xcpci->stat_cmd_reg, PCI_STAT_CMD_B | PCI_STAT_CMD_M);
-
- /* Cache line size and master latency */
- out_be32 (&xcpci->bist_htyp_lat_cshl, (0xf8 << PCI_CFG1_LT_SHIFT));
-
- out_be32 (&xcpci->base0, PCI_BASE_ADDR_REG0); /* 256MB - MBAR space */
- out_be32 (&xcpci->base1, PCI_BASE_ADDR_REG1); /* 1GB - SDRAM space */
-
- out_be32 (&xcpci->target_bar0,
- PCI_TARGET_BASE_ADDR_REG0 | PCI_TARGET_BASE_ADDR_EN);
- out_be32 (&xcpci->target_bar1,
- PCI_TARGET_BASE_ADDR_REG1 | PCI_TARGET_BASE_ADDR_EN);
-
- /* Deassert reset bit */
- out_be32 (&xcpci->glb_stat_ctl, 0x00000000);
-
- /* Enable PCI bus master support */
- /* Set PCIGNT1, PCIREQ1, PCIREQ0/PCIGNTIN, PCIGNT0/PCIREQOUT,
- PCIREQ2, PCIGNT2 */
- out_be32((volatile u32 *)&portcfg->pcfg3,
- (in_be32((volatile u32 *)&portcfg->pcfg3) & 0xFC3FCE7F));
- out_be32((volatile u32 *)&portcfg->pcfg3,
- (in_be32((volatile u32 *)&portcfg->pcfg3) | 0x01400180));
-
- hose->first_busno = 0;
- hose->last_busno = 0xff;
-
- pci_set_region(hose->regions + 0,
- CONFIG_PCI_MEM_BUS,
- CONFIG_PCI_MEM_PHYS,
- CONFIG_PCI_MEM_SIZE,
- PCI_REGION_MEM);
-
- pci_set_region(hose->regions + 1,
- CONFIG_PCI_IO_BUS,
- CONFIG_PCI_IO_PHYS,
- CONFIG_PCI_IO_SIZE,
- PCI_REGION_IO);
-
- pci_set_region(hose->regions + 2,
- CONFIG_PCI_SYS_MEM_BUS,
- CONFIG_PCI_SYS_MEM_PHYS,
- CONFIG_PCI_SYS_MEM_SIZE,
- PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
-
- hose->region_count = 3;
-
- hose->cfg_addr = &(xcpci->cfg_adr);
- hose->cfg_data = (volatile unsigned char *)CONFIG_PCI_CFG_BUS;
-
- pci_set_ops(hose,
- mpc8220_pci_read_config_byte,
- mpc8220_pci_read_config_word,
- mpc8220_pci_read_config_dword,
- mpc8220_pci_write_config_byte,
- mpc8220_pci_write_config_word,
- mpc8220_pci_write_config_dword);
-
- /* Hose scan */
- pci_register_hose(hose);
- hose->last_busno = pci_hose_scan(hose);
-
- out_be32 (&xcpci->base0, PCI_BASE_ADDR_REG0); /* 256MB - MBAR space */
- out_be32 (&xcpci->base1, PCI_BASE_ADDR_REG1); /* 1GB - SDRAM space */
-}
-
-#endif /* CONFIG_PCI */
diff --git a/arch/powerpc/cpu/mpc8220/speed.c b/arch/powerpc/cpu/mpc8220/speed.c
deleted file mode 100644
index bb72e5c..0000000
--- a/arch/powerpc/cpu/mpc8220/speed.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * (C) Copyright 2004, Freescale, Inc
- * TsiChung Liew, Tsi-Chung.Liew@freescale.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8220.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-typedef struct pllmultiplier {
- u8 hid1;
- int multi;
- int vco_div;
-} pllcfg_t;
-
-/* ------------------------------------------------------------------------- */
-
-/*
- *
- */
-
-int get_clocks (void)
-{
- pllcfg_t bus2core[] = {
- {0x02, 2, 8}, /* 1 */
- {0x01, 2, 4},
- {0x0C, 3, 8}, /* 1.5 */
- {0x00, 3, 4},
- {0x18, 3, 2},
- {0x05, 4, 4}, /* 2 */
- {0x04, 4, 2},
- {0x11, 5, 4}, /* 2.5 */
- {0x06, 5, 2},
- {0x10, 6, 4}, /* 3 */
- {0x08, 6, 2},
- {0x0E, 7, 2}, /* 3.5 */
- {0x0A, 8, 2}, /* 4 */
- {0x07, 9, 2}, /* 4.5 */
- {0x0B, 10, 2}, /* 5 */
- {0x09, 11, 2}, /* 5.5 */
- {0x0D, 12, 2}, /* 6 */
- {0x12, 13, 2}, /* 6.5 */
- {0x14, 14, 2}, /* 7 */
- {0x16, 15, 2}, /* 7.5 */
- {0x1C, 16, 2} /* 8 */
- };
- u32 hid1;
- int i, size, pci2bus;
-
-#if !defined(CONFIG_SYS_MPC8220_CLKIN)
-#error clock measuring not implemented yet - define CONFIG_SYS_MPC8220_CLKIN
-#endif
-
- gd->arch.inp_clk = CONFIG_SYS_MPC8220_CLKIN;
-
- /* Read XLB to PCI(INP) clock multiplier */
- pci2bus = (*((volatile u32 *)PCI_REG_PCIGSCR) &
- PCI_REG_PCIGSCR_PCI2XLB_CLK_MASK)>>PCI_REG_PCIGSCR_PCI2XLB_CLK_BIT;
-
- /* XLB bus clock */
- gd->bus_clk = CONFIG_SYS_MPC8220_CLKIN * pci2bus;
-
- /* PCI clock is same as input clock */
- gd->pci_clk = CONFIG_SYS_MPC8220_CLKIN;
-
- /* FlexBus is temporary set as the same as input clock */
- /* will do dynamic in the future */
- gd->arch.flb_clk = CONFIG_SYS_MPC8220_CLKIN;
-
- /* CPU Clock - Read HID1 */
- asm volatile ("mfspr %0, 1009":"=r" (hid1):);
-
- size = sizeof (bus2core) / sizeof (pllcfg_t);
-
- hid1 >>= 27;
-
- for (i = 0; i < size; i++)
- if (hid1 == bus2core[i].hid1) {
- gd->cpu_clk = (bus2core[i].multi * gd->bus_clk) >> 1;
- gd->arch.vco_clk =
- CONFIG_SYS_MPC8220_SYSPLL_VCO_MULTIPLIER *
- (gd->pci_clk * bus2core[i].vco_div) / 2;
- break;
- }
-
- /* hardcoded 81MHz for now */
- gd->arch.pev_clk = 81000000;
-
- return (0);
-}
-
-int prt_mpc8220_clks (void)
-{
- char buf1[32], buf2[32], buf3[32], buf4[32];
-
- printf (" Bus %s MHz, CPU %s MHz, PCI %s MHz, VCO %s MHz\n",
- strmhz(buf1, gd->bus_clk),
- strmhz(buf2, gd->cpu_clk),
- strmhz(buf3, gd->pci_clk),
- strmhz(buf4, gd->arch.vco_clk)
- );
- return (0);
-}
-
-/* ------------------------------------------------------------------------- */
diff --git a/arch/powerpc/cpu/mpc8220/start.S b/arch/powerpc/cpu/mpc8220/start.S
deleted file mode 100644
index 6295631..0000000
--- a/arch/powerpc/cpu/mpc8220/start.S
+++ /dev/null
@@ -1,734 +0,0 @@
-/*
- * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
- * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
- * Copyright (C) 2000 - 2003 Wolfgang Denk <wd@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * U-Boot - Startup Code for MPC8220 CPUs
- */
-#include <asm-offsets.h>
-#include <config.h>
-#include <mpc8220.h>
-#include <version.h>
-
-#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-#include <asm/u-boot.h>
-
-/* We don't want the MMU yet.
-*/
-#undef MSR_KERNEL
-/* Floating Point enable, Machine Check and Recoverable Interr. */
-#ifdef DEBUG
-#define MSR_KERNEL (MSR_FP|MSR_RI)
-#else
-#define MSR_KERNEL (MSR_FP|MSR_ME|MSR_RI)
-#endif
-
-/*
- * Set up GOT: Global Offset Table
- *
- * Use r12 to access the GOT
- */
- START_GOT
- GOT_ENTRY(_GOT2_TABLE_)
- GOT_ENTRY(_FIXUP_TABLE_)
-
- GOT_ENTRY(_start)
- GOT_ENTRY(_start_of_vectors)
- GOT_ENTRY(_end_of_vectors)
- GOT_ENTRY(transfer_to_handler)
-
- GOT_ENTRY(__init_end)
- GOT_ENTRY(__bss_end)
- GOT_ENTRY(__bss_start)
- END_GOT
-
-/*
- * Version string
- */
- .data
- .globl version_string
-version_string:
- .ascii U_BOOT_VERSION_STRING, "\0"
-
-/*
- * Exception vectors
- */
- .text
- . = EXC_OFF_SYS_RESET
- .globl _start
-_start:
- mfmsr r5 /* save msr contents */
-
- /* replace default MBAR base address from 0x80000000
- to 0xf0000000 */
-
-#if defined(CONFIG_SYS_DEFAULT_MBAR) && !defined(CONFIG_SYS_RAMBOOT)
- lis r3, CONFIG_SYS_MBAR@h
- ori r3, r3, CONFIG_SYS_MBAR@l
-
- /* MBAR is mirrored into the MBAR SPR */
- mtspr MBAR,r3
- mtspr SPRN_SPRG7W,r3
- lis r4, CONFIG_SYS_DEFAULT_MBAR@h
- stw r3, 0(r4)
-#endif /* CONFIG_SYS_DEFAULT_MBAR */
-
- /* Initialise the MPC8220 processor core */
- /*--------------------------------------------------------------*/
-
- bl init_8220_core
-
- /* initialize some things that are hard to access from C */
- /*--------------------------------------------------------------*/
-
- /* set up stack in on-chip SRAM */
- lis r3, CONFIG_SYS_INIT_RAM_ADDR@h
- ori r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l
- ori r1, r3, CONFIG_SYS_INIT_SP_OFFSET
-
- li r0, 0 /* Make room for stack frame header and */
- stwu r0, -4(r1) /* clear final stack frame so that */
- stwu r0, -4(r1) /* stack backtraces terminate cleanly */
-
- /* let the C-code set up the rest */
- /* */
- /* Be careful to keep code relocatable ! */
- /*--------------------------------------------------------------*/
-
- GET_GOT /* initialize GOT access */
-
- /* r3: IMMR */
- bl cpu_init_f /* run low-level CPU init code (in Flash)*/
-
- bl board_init_f /* run 1st part of board init code (in Flash)*/
-
- /* NOTREACHED - board_init_f() does not return */
-
-/*
- * Vector Table
- */
-
- .globl _start_of_vectors
-_start_of_vectors:
-
-/* Machine check */
- STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)
-
-/* Data Storage exception. */
- STD_EXCEPTION(0x300, DataStorage, UnknownException)
-
-/* Instruction Storage exception. */
- STD_EXCEPTION(0x400, InstStorage, UnknownException)
-
-/* External Interrupt exception. */
- STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
-
-/* Alignment exception. */
- . = 0x600
-Alignment:
- EXCEPTION_PROLOG(SRR0, SRR1)
- mfspr r4,DAR
- stw r4,_DAR(r21)
- mfspr r5,DSISR
- stw r5,_DSISR(r21)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
-
-/* Program check exception */
- . = 0x700
-ProgramCheck:
- EXCEPTION_PROLOG(SRR0, SRR1)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
- MSR_KERNEL, COPY_EE)
-
- STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
-
- /* I guess we could implement decrementer, and may have
- * to someday for timekeeping.
- */
- STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
-
- STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
- STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
- STD_EXCEPTION(0xc00, SystemCall, UnknownException)
- STD_EXCEPTION(0xd00, SingleStep, UnknownException)
-
- STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
- STD_EXCEPTION(0xf00, Trap_0f, UnknownException)
-
- STD_EXCEPTION(0x1000, InstructionTLBMiss, UnknownException)
- STD_EXCEPTION(0x1100, DataLoadTLBMiss, UnknownException)
- STD_EXCEPTION(0x1200, DataStoreTLBMiss, UnknownException)
-#ifdef DEBUG
- . = 0x1300
- /*
- * This exception occurs when the program counter matches the
- * Instruction Address Breakpoint Register (IABR).
- *
- * I want the cpu to halt if this occurs so I can hunt around
- * with the debugger and look at things.
- *
- * When DEBUG is defined, both machine check enable (in the MSR)
- * and checkstop reset enable (in the reset mode register) are
- * turned off and so a checkstop condition will result in the cpu
- * halting.
- *
- * I force the cpu into a checkstop condition by putting an illegal
- * instruction here (at least this is the theory).
- *
- * well - that didnt work, so just do an infinite loop!
- */
-1: b 1b
-#else
- STD_EXCEPTION(0x1300, InstructionBreakpoint, DebugException)
-#endif
- STD_EXCEPTION(0x1400, SMI, UnknownException)
-
- STD_EXCEPTION(0x1500, Trap_15, UnknownException)
- STD_EXCEPTION(0x1600, Trap_16, UnknownException)
- STD_EXCEPTION(0x1700, Trap_17, UnknownException)
- STD_EXCEPTION(0x1800, Trap_18, UnknownException)
- STD_EXCEPTION(0x1900, Trap_19, UnknownException)
- STD_EXCEPTION(0x1a00, Trap_1a, UnknownException)
- STD_EXCEPTION(0x1b00, Trap_1b, UnknownException)
- STD_EXCEPTION(0x1c00, Trap_1c, UnknownException)
- STD_EXCEPTION(0x1d00, Trap_1d, UnknownException)
- STD_EXCEPTION(0x1e00, Trap_1e, UnknownException)
- STD_EXCEPTION(0x1f00, Trap_1f, UnknownException)
- STD_EXCEPTION(0x2000, Trap_20, UnknownException)
- STD_EXCEPTION(0x2100, Trap_21, UnknownException)
- STD_EXCEPTION(0x2200, Trap_22, UnknownException)
- STD_EXCEPTION(0x2300, Trap_23, UnknownException)
- STD_EXCEPTION(0x2400, Trap_24, UnknownException)
- STD_EXCEPTION(0x2500, Trap_25, UnknownException)
- STD_EXCEPTION(0x2600, Trap_26, UnknownException)
- STD_EXCEPTION(0x2700, Trap_27, UnknownException)
- STD_EXCEPTION(0x2800, Trap_28, UnknownException)
- STD_EXCEPTION(0x2900, Trap_29, UnknownException)
- STD_EXCEPTION(0x2a00, Trap_2a, UnknownException)
- STD_EXCEPTION(0x2b00, Trap_2b, UnknownException)
- STD_EXCEPTION(0x2c00, Trap_2c, UnknownException)
- STD_EXCEPTION(0x2d00, Trap_2d, UnknownException)
- STD_EXCEPTION(0x2e00, Trap_2e, UnknownException)
- STD_EXCEPTION(0x2f00, Trap_2f, UnknownException)
-
-
- .globl _end_of_vectors
-_end_of_vectors:
-
- . = 0x3000
-
-/*
- * This code finishes saving the registers to the exception frame
- * and jumps to the appropriate handler for the exception.
- * Register r21 is pointer into trap frame, r1 has new stack pointer.
- */
- .globl transfer_to_handler
-transfer_to_handler:
- stw r22,_NIP(r21)
- lis r22,MSR_POW@h
- andc r23,r23,r22
- stw r23,_MSR(r21)
- SAVE_GPR(7, r21)
- SAVE_4GPRS(8, r21)
- SAVE_8GPRS(12, r21)
- SAVE_8GPRS(24, r21)
- mflr r23
- andi. r24,r23,0x3f00 /* get vector offset */
- stw r24,TRAP(r21)
- li r22,0
- stw r22,RESULT(r21)
- lwz r24,0(r23) /* virtual address of handler */
- lwz r23,4(r23) /* where to go when done */
- mtspr SRR0,r24
- mtspr SRR1,r20
- mtlr r23
- SYNC
- rfi /* jump to handler, enable MMU */
-
-int_return:
- mfmsr r28 /* Disable interrupts */
- li r4,0
- ori r4,r4,MSR_EE
- andc r28,r28,r4
- SYNC /* Some chip revs need this... */
- mtmsr r28
- SYNC
- lwz r2,_CTR(r1)
- lwz r0,_LINK(r1)
- mtctr r2
- mtlr r0
- lwz r2,_XER(r1)
- lwz r0,_CCR(r1)
- mtspr XER,r2
- mtcrf 0xFF,r0
- REST_10GPRS(3, r1)
- REST_10GPRS(13, r1)
- REST_8GPRS(23, r1)
- REST_GPR(31, r1)
- lwz r2,_NIP(r1) /* Restore environment */
- lwz r0,_MSR(r1)
- mtspr SRR0,r2
- mtspr SRR1,r0
- lwz r0,GPR0(r1)
- lwz r2,GPR2(r1)
- lwz r1,GPR1(r1)
- SYNC
- rfi
-
-/*
- * This code initialises the MPC8220 processor core
- * (conforms to PowerPC 603e spec)
- * Note: expects original MSR contents to be in r5.
- */
-
- .globl init_8220_core
-init_8220_core:
-
- /* Initialize machine status; enable machine check interrupt */
- /*--------------------------------------------------------------*/
-
- li r3, MSR_KERNEL /* Set ME and RI flags */
- rlwimi r3, r5, 0, 25, 25 /* preserve IP bit set by HRCW */
-#ifdef DEBUG
- rlwimi r3, r5, 0, 21, 22 /* debugger might set SE & BE bits */
-#endif
- SYNC /* Some chip revs need this... */
- mtmsr r3
- SYNC
- mtspr SRR1, r3 /* Make SRR1 match MSR */
-
- /* Initialize the Hardware Implementation-dependent Registers */
- /* HID0 also contains cache control */
- /*--------------------------------------------------------------*/
-
- lis r3, CONFIG_SYS_HID0_INIT@h
- ori r3, r3, CONFIG_SYS_HID0_INIT@l
- SYNC
- mtspr HID0, r3
-
- lis r3, CONFIG_SYS_HID0_FINAL@h
- ori r3, r3, CONFIG_SYS_HID0_FINAL@l
- SYNC
- mtspr HID0, r3
-
- /* Enable Extra BATs */
- mfspr r3, 1011 /* HID2 */
- lis r4, 0x0004
- ori r4, r4, 0x0000
- or r4, r4, r3
- mtspr 1011, r4
- sync
-
- /* clear all BAT's */
- /*--------------------------------------------------------------*/
-
- li r0, 0
- mtspr DBAT0U, r0
- mtspr DBAT0L, r0
- mtspr DBAT1U, r0
- mtspr DBAT1L, r0
- mtspr DBAT2U, r0
- mtspr DBAT2L, r0
- mtspr DBAT3U, r0
- mtspr DBAT3L, r0
- mtspr DBAT4U, r0
- mtspr DBAT4L, r0
- mtspr DBAT5U, r0
- mtspr DBAT5L, r0
- mtspr DBAT6U, r0
- mtspr DBAT6L, r0
- mtspr DBAT7U, r0
- mtspr DBAT7L, r0
- mtspr IBAT0U, r0
- mtspr IBAT0L, r0
- mtspr IBAT1U, r0
- mtspr IBAT1L, r0
- mtspr IBAT2U, r0
- mtspr IBAT2L, r0
- mtspr IBAT3U, r0
- mtspr IBAT3L, r0
- mtspr IBAT4U, r0
- mtspr IBAT4L, r0
- mtspr IBAT5U, r0
- mtspr IBAT5L, r0
- mtspr IBAT6U, r0
- mtspr IBAT6L, r0
- mtspr IBAT7U, r0
- mtspr IBAT7L, r0
- SYNC
-
- /* invalidate all tlb's */
- /* */
- /* From the 603e User Manual: "The 603e provides the ability to */
- /* invalidate a TLB entry. The TLB Invalidate Entry (tlbie) */
- /* instruction invalidates the TLB entry indexed by the EA, and */
- /* operates on both the instruction and data TLBs simultaneously*/
- /* invalidating four TLB entries (both sets in each TLB). The */
- /* index corresponds to bits 15-19 of the EA. To invalidate all */
- /* entries within both TLBs, 32 tlbie instructions should be */
- /* issued, incrementing this field by one each time." */
- /* */
- /* "Note that the tlbia instruction is not implemented on the */
- /* 603e." */
- /* */
- /* bits 15-19 correspond to addresses 0x00000000 to 0x0001F000 */
- /* incrementing by 0x1000 each time. The code below is sort of */
- /* based on code in "flush_tlbs" from arch/powerpc/kernel/head.S */
- /* */
- /*--------------------------------------------------------------*/
-
- li r3, 32
- mtctr r3
- li r3, 0
-1: tlbie r3
- addi r3, r3, 0x1000
- bdnz 1b
- SYNC
-
- /* Done! */
- /*--------------------------------------------------------------*/
-
- blr
-
-/* Cache functions.
- *
- * Note: requires that all cache bits in
- * HID0 are in the low half word.
- */
- .globl icache_enable
-icache_enable:
- lis r4, 0
- ori r4, r4, CONFIG_SYS_HID0_INIT /* set ICE & ICFI bit */
- rlwinm r3, r4, 0, 21, 19 /* clear the ICFI bit */
-
- /*
- * The setting of the instruction cache enable (ICE) bit must be
- * preceded by an isync instruction to prevent the cache from being
- * enabled or disabled while an instruction access is in progress.
- */
- isync
- mtspr HID0, r4 /* Enable Instr Cache & Inval cache */
- mtspr HID0, r3 /* using 2 consec instructions */
- isync
- blr
-
- .globl icache_disable
-icache_disable:
- mfspr r3, HID0
- rlwinm r3, r3, 0, 17, 15 /* clear the ICE bit */
- mtspr HID0, r3
- isync
- blr
-
- .globl icache_status
-icache_status:
- mfspr r3, HID0
- rlwinm r3, r3, HID0_ICE_BITPOS + 1, 31, 31
- blr
-
- .globl dcache_enable
-dcache_enable:
- lis r4, 0
- ori r4, r4, HID0_DCE|HID0_DCFI /* set DCE & DCFI bit */
- rlwinm r3, r4, 0, 22, 20 /* clear the DCFI bit */
-
- /* Enable address translation in MSR bit */
- mfmsr r5
- ori r5, r5, 0x
-
-
- /*
- * The setting of the instruction cache enable (ICE) bit must be
- * preceded by an isync instruction to prevent the cache from being
- * enabled or disabled while an instruction access is in progress.
- */
- isync
- mtspr HID0, r4 /* Enable Data Cache & Inval cache*/
- mtspr HID0, r3 /* using 2 consec instructions */
- isync
- blr
-
- .globl dcache_disable
-dcache_disable:
- mfspr r3, HID0
- rlwinm r3, r3, 0, 18, 16 /* clear the DCE bit */
- mtspr HID0, r3
- isync
- blr
-
- .globl dcache_status
-dcache_status:
- mfspr r3, HID0
- rlwinm r3, r3, HID0_DCE_BITPOS + 1, 31, 31
- blr
-
- .globl get_pvr
-get_pvr:
- mfspr r3, PVR
- blr
-
-/*------------------------------------------------------------------------------*/
-
-/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- * r3 = dest
- * r4 = src
- * r5 = length in bytes
- * r6 = cachelinesize
- */
- .globl relocate_code
-relocate_code:
- mr r1, r3 /* Set new stack pointer */
- mr r9, r4 /* Save copy of Global Data pointer */
- mr r10, r5 /* Save copy of Destination Address */
-
- GET_GOT
- mr r3, r5 /* Destination Address */
- lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
- ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
- lwz r5, GOT(__init_end)
- sub r5, r5, r4
- li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */
-
- /*
- * Fix GOT pointer:
- *
- * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
- *
- * Offset:
- */
- sub r15, r10, r4
-
- /* First our own GOT */
- add r12, r12, r15
- /* then the one used by the C code */
- add r30, r30, r15
-
- /*
- * Now relocate code
- */
-
- cmplw cr1,r3,r4
- addi r0,r5,3
- srwi. r0,r0,2
- beq cr1,4f /* In place copy is not necessary */
- beq 7f /* Protect against 0 count */
- mtctr r0
- bge cr1,2f
-
- la r8,-4(r4)
- la r7,-4(r3)
-1: lwzu r0,4(r8)
- stwu r0,4(r7)
- bdnz 1b
- b 4f
-
-2: slwi r0,r0,2
- add r8,r4,r0
- add r7,r3,r0
-3: lwzu r0,-4(r8)
- stwu r0,-4(r7)
- bdnz 3b
-
-/*
- * Now flush the cache: note that we must start from a cache aligned
- * address. Otherwise we might miss one cache line.
- */
-4: cmpwi r6,0
- add r5,r3,r5
- beq 7f /* Always flush prefetch queue in any case */
- subi r0,r6,1
- andc r3,r3,r0
- mfspr r7,HID0 /* don't do dcbst if dcache is disabled */
- rlwinm r7,r7,HID0_DCE_BITPOS+1,31,31
- cmpwi r7,0
- beq 9f
- mr r4,r3
-5: dcbst 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 5b
- sync /* Wait for all dcbst to complete on bus */
-9: mfspr r7,HID0 /* don't do icbi if icache is disabled */
- rlwinm r7,r7,HID0_ICE_BITPOS+1,31,31
- cmpwi r7,0
- beq 7f
- mr r4,r3
-6: icbi 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 6b
-7: sync /* Wait for all icbi to complete on bus */
- isync
-
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
-
- addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
- mtlr r0
- blr
-
-in_ram:
-
- /*
- * Relocation Function, r12 point to got2+0x8000
- *
- * Adjust got2 pointers, no need to check for 0, this code
- * already puts a few entries in the table.
- */
- li r0,__got2_entries@sectoff@l
- la r3,GOT(_GOT2_TABLE_)
- lwz r11,GOT(_GOT2_TABLE_)
- mtctr r0
- sub r11,r3,r11
- addi r3,r3,-4
-1: lwzu r0,4(r3)
- cmpwi r0,0
- beq- 2f
- add r0,r0,r11
- stw r0,0(r3)
-2: bdnz 1b
-
- /*
- * Now adjust the fixups and the pointers to the fixups
- * in case we need to move ourselves again.
- */
- li r0,__fixup_entries@sectoff@l
- lwz r3,GOT(_FIXUP_TABLE_)
- cmpwi r0,0
- mtctr r0
- addi r3,r3,-4
- beq 4f
-3: lwzu r4,4(r3)
- lwzux r0,r4,r11
- cmpwi r0,0
- add r0,r0,r11
- stw r4,0(r3)
- beq- 5f
- stw r0,0(r4)
-5: bdnz 3b
-4:
-clear_bss:
- /*
- * Now clear BSS segment
- */
- lwz r3,GOT(__bss_start)
- lwz r4,GOT(__bss_end)
-
- cmplw 0, r3, r4
- beq 6f
-
- li r0, 0
-5:
- stw r0, 0(r3)
- addi r3, r3, 4
- cmplw 0, r3, r4
- bne 5b
-6:
-
- mr r3, r9 /* Global Data pointer */
- mr r4, r10 /* Destination Address */
- bl board_init_r
-
- /*
- * Copy exception vector code to low memory
- *
- * r3: dest_addr
- * r7: source address, r8: end address, r9: target address
- */
- .globl trap_init
-trap_init:
- mflr r4 /* save link register */
- GET_GOT
- lwz r7, GOT(_start)
- lwz r8, GOT(_end_of_vectors)
-
- li r9, 0x100 /* reset vector always at 0x100 */
-
- cmplw 0, r7, r8
- bgelr /* return if r7>=r8 - just in case */
-1:
- lwz r0, 0(r7)
- stw r0, 0(r9)
- addi r7, r7, 4
- addi r9, r9, 4
- cmplw 0, r7, r8
- bne 1b
-
- /*
- * relocate `hdlr' and `int_return' entries
- */
- li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
- li r8, Alignment - _start + EXC_OFF_SYS_RESET
-2:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 2b
-
- li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
- bl trap_reloc
-
- li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
- bl trap_reloc
-
- li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
- li r8, SystemCall - _start + EXC_OFF_SYS_RESET
-3:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 3b
-
- li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
- li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
-4:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 4b
-
- mfmsr r3 /* now that the vectors have */
- lis r7, MSR_IP@h /* relocated into low memory */
- ori r7, r7, MSR_IP@l /* MSR[IP] can be turned off */
- andc r3, r3, r7 /* (if it was on) */
- SYNC /* Some chip revs need this... */
- mtmsr r3
- SYNC
-
- mtlr r4 /* restore link register */
- blr
diff --git a/arch/powerpc/cpu/mpc8220/traps.c b/arch/powerpc/cpu/mpc8220/traps.c
deleted file mode 100644
index 19d6cb5..0000000
--- a/arch/powerpc/cpu/mpc8220/traps.c
+++ /dev/null
@@ -1,231 +0,0 @@
-/*
- * linux/arch/powerpc/kernel/traps.c
- *
- * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- * Modified by Cort Dougan (cort@cs.nmt.edu)
- * and Paul Mackerras (paulus@cs.anu.edu.au)
- * fixed Machine Check Reasons by Reinhard Meyer (r.meyer@emk-elektronik.de)
- *
- * (C) Copyright 2000-2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * This file handles the architecture-dependent parts of hardware exceptions
- */
-
-#include <common.h>
-#include <command.h>
-#include <kgdb.h>
-#include <asm/processor.h>
-
-/* Returns 0 if exception not found and fixup otherwise. */
-extern unsigned long search_exception_table(unsigned long);
-
-/* THIS NEEDS CHANGING to use the board info structure.
-*/
-#define END_OF_MEM 0x02000000
-
-/*
- * Trap & Exception support
- */
-
-static void print_backtrace(unsigned long *sp)
-{
- int cnt = 0;
- unsigned long i;
-
- printf("Call backtrace: ");
- while (sp) {
- if ((uint) sp > END_OF_MEM)
- break;
-
- i = sp[1];
- if (cnt++ % 7 == 0)
- printf("\n");
- printf("%08lX ", i);
- if (cnt > 32)
- break;
- sp = (unsigned long *) *sp;
- }
- printf("\n");
-}
-
-void show_regs(struct pt_regs *regs)
-{
- int i;
-
- printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n",
- regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
- printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
- regs->msr,
- regs->msr & MSR_EE ? 1 : 0, regs->msr & MSR_PR ? 1 : 0,
- regs->msr & MSR_FP ? 1 : 0, regs->msr & MSR_ME ? 1 : 0,
- regs->msr & MSR_IR ? 1 : 0, regs->msr & MSR_DR ? 1 : 0);
-
- printf("\n");
- for (i = 0; i < 32; i++) {
- if ((i % 8) == 0) {
- printf("GPR%02d: ", i);
- }
-
- printf("%08lX ", regs->gpr[i]);
- if ((i % 8) == 7) {
- printf("\n");
- }
- }
-}
-
-
-static void _exception(int signr, struct pt_regs *regs)
-{
- show_regs(regs);
- print_backtrace((unsigned long *) regs->gpr[1]);
- panic("Exception in kernel pc %lx signal %d", regs->nip, signr);
-}
-
-void MachineCheckException(struct pt_regs *regs)
-{
- unsigned long fixup = search_exception_table(regs->nip);
-
- /* Probing PCI using config cycles cause this exception
- * when a device is not present. Catch it and return to
- * the PCI exception handler.
- */
- if (fixup) {
- regs->nip = fixup;
- return;
- }
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
-
- printf("Machine check in kernel mode.\n");
- printf("Caused by (from msr): ");
- printf("regs %p ", regs);
- /* refer to 603e Manual (MPC603EUM/AD), chapter 4.5.2.1 */
- switch (regs->msr & 0x000F0000) {
- case (0x80000000 >> 12):
- printf("Machine check signal - probably due to mm fault\n"
- "with mmu off\n");
- break;
- case (0x80000000 >> 13):
- printf("Transfer error ack signal\n");
- break;
- case (0x80000000 >> 14):
- printf("Data parity signal\n");
- break;
- case (0x80000000 >> 15):
- printf("Address parity signal\n");
- break;
- default:
- printf("Unknown values in msr\n");
- }
- show_regs(regs);
- print_backtrace((unsigned long *) regs->gpr[1]);
- panic("machine check");
-}
-
-void AlignmentException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- show_regs(regs);
- print_backtrace((unsigned long *) regs->gpr[1]);
- panic("Alignment Exception");
-}
-
-void ProgramCheckException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- show_regs(regs);
- print_backtrace((unsigned long *) regs->gpr[1]);
- panic("Program Check Exception");
-}
-
-void SoftEmuException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- show_regs(regs);
- print_backtrace((unsigned long *) regs->gpr[1]);
- panic("Software Emulation Exception");
-}
-
-
-void UnknownException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
- regs->nip, regs->msr, regs->trap);
- _exception(0, regs);
-}
-
-#if defined(CONFIG_CMD_BEDBUG)
-extern void do_bedbug_breakpoint(struct pt_regs *);
-#endif
-
-void DebugException(struct pt_regs *regs)
-{
-
- printf("Debugger trap at @ %lx\n", regs->nip);
- show_regs(regs);
-#if defined(CONFIG_CMD_BEDBUG)
- do_bedbug_breakpoint(regs);
-#endif
-}
-
-/* Probe an address by reading. If not present, return -1, otherwise
- * return 0.
- */
-int addr_probe(uint *addr)
-{
-#if 0
- int retval;
-
- __asm__ __volatile__ ("1: lwz %0,0(%1)\n"
- " eieio\n"
- " li %0,0\n"
- "2:\n"
- ".section .fixup,\"ax\"\n"
- "3: li %0,-1\n"
- " b 2b\n"
- ".section __ex_table,\"a\"\n"
- " .align 2\n"
- " .long 1b,3b\n"
- ".text":"=r" (retval):"r" (addr));
-
- return (retval);
-#endif
- return 0;
-}
diff --git a/arch/powerpc/cpu/mpc8220/u-boot.lds b/arch/powerpc/cpu/mpc8220/u-boot.lds
deleted file mode 100644
index dc63d20..0000000
--- a/arch/powerpc/cpu/mpc8220/u-boot.lds
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * (C) Copyright 2003-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- .text :
- {
- arch/powerpc/cpu/mpc8220/start.o (.text*)
- *(.text*)
- . = ALIGN(16);
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- _GOT2_TABLE_ = .;
- KEEP(*(.got2))
- KEEP(*(.got))
- PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
- _FIXUP_TABLE_ = .;
- KEEP(*(.fixup))
- }
- __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
- __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
- .data :
- {
- *(.data*)
- *(.sdata*)
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
-
- . = ALIGN(4);
- .u_boot_list : {
- KEEP(*(SORT(.u_boot_list*)));
- }
-
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(4096);
- __init_end = .;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.bss*)
- *(.sbss*)
- *(COMMON)
- . = ALIGN(4);
- }
- __bss_end = . ;
- PROVIDE (end = .);
-}
diff --git a/arch/powerpc/cpu/mpc8220/uart.c b/arch/powerpc/cpu/mpc8220/uart.c
deleted file mode 100644
index 772528f..0000000
--- a/arch/powerpc/cpu/mpc8220/uart.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- * (C) Copyright 2004, Freescale, Inc
- * TsiChung Liew, Tsi-Chung.Liew@freescale.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-/*
- * Minimal serial functions needed to use one of the PSC ports
- * as serial console interface.
- */
-
-#include <common.h>
-#include <mpc8220.h>
-#include <serial.h>
-#include <linux/compiler.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define PSC_BASE MMAP_PSC1
-
-#if defined(CONFIG_PSC_CONSOLE)
-static int mpc8220_serial_init(void)
-{
- volatile psc8220_t *psc = (psc8220_t *) PSC_BASE;
- u32 counter;
-
- /* write to SICR: SIM2 = uart mode,dcd does not affect rx */
- psc->cr = 0;
- psc->ipcr_acr = 0;
- psc->isr_imr = 0;
-
- /* write to CSR: RX/TX baud rate from timers */
- psc->sr_csr = 0xdd000000;
-
- psc->mr1_2 = PSC_MR1_BITS_CHAR_8 | PSC_MR1_NO_PARITY | PSC_MR2_STOP_BITS_1;
-
- /* Setting up BaudRate */
- counter = ((gd->bus_clk / gd->baudrate)) >> 5;
- counter++;
-
- /* write to CTUR: divide counter upper byte */
- psc->ctur = ((counter & 0xff00) << 16);
- /* write to CTLR: divide counter lower byte */
- psc->ctlr = ((counter & 0x00ff) << 24);
-
- psc->cr = PSC_CR_RST_RX_CMD;
- psc->cr = PSC_CR_RST_TX_CMD;
- psc->cr = PSC_CR_RST_ERR_STS_CMD;
- psc->cr = PSC_CR_RST_BRK_INT_CMD;
- psc->cr = PSC_CR_RST_MR_PTR_CMD;
-
- psc->cr = PSC_CR_RX_ENABLE | PSC_CR_TX_ENABLE;
- return (0);
-}
-
-static void mpc8220_serial_putc(const char c)
-{
- volatile psc8220_t *psc = (psc8220_t *) PSC_BASE;
-
- if (c == '\n')
- serial_putc ('\r');
-
- /* Wait for last character to go. */
- while (!(psc->sr_csr & PSC_SR_TXRDY));
-
- psc->xmitbuf[0] = c;
-}
-
-static int mpc8220_serial_getc(void)
-{
- volatile psc8220_t *psc = (psc8220_t *) PSC_BASE;
-
- /* Wait for a character to arrive. */
- while (!(psc->sr_csr & PSC_SR_RXRDY));
- return psc->xmitbuf[2];
-}
-
-static int mpc8220_serial_tstc(void)
-{
- volatile psc8220_t *psc = (psc8220_t *) PSC_BASE;
-
- return (psc->sr_csr & PSC_SR_RXRDY);
-}
-
-static void mpc8220_serial_setbrg(void)
-{
- volatile psc8220_t *psc = (psc8220_t *) PSC_BASE;
- u32 counter;
-
- counter = ((gd->bus_clk / gd->baudrate)) >> 5;
- counter++;
-
- /* write to CTUR: divide counter upper byte */
- psc->ctur = ((counter & 0xff00) << 16);
- /* write to CTLR: divide counter lower byte */
- psc->ctlr = ((counter & 0x00ff) << 24);
-
- psc->cr = PSC_CR_RST_RX_CMD;
- psc->cr = PSC_CR_RST_TX_CMD;
-
- psc->cr = PSC_CR_RX_ENABLE | PSC_CR_TX_ENABLE;
-}
-
-static struct serial_device mpc8220_serial_drv = {
- .name = "mpc8220_serial",
- .start = mpc8220_serial_init,
- .stop = NULL,
- .setbrg = mpc8220_serial_setbrg,
- .putc = mpc8220_serial_putc,
- .puts = default_serial_puts,
- .getc = mpc8220_serial_getc,
- .tstc = mpc8220_serial_tstc,
-};
-
-void mpc8220_serial_initialize(void)
-{
- serial_register(&mpc8220_serial_drv);
-}
-
-__weak struct serial_device *default_serial_console(void)
-{
- return &mpc8220_serial_drv;
-}
-#endif /* CONFIG_PSC_CONSOLE */
diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile
index 6776c85..2318064 100644
--- a/arch/powerpc/cpu/mpc85xx/Makefile
+++ b/arch/powerpc/cpu/mpc85xx/Makefile
@@ -83,10 +83,12 @@
COBJS-$(CONFIG_PPC_P5020) += ddr-gen3.o
COBJS-$(CONFIG_PPC_P5040) += ddr-gen3.o
COBJS-$(CONFIG_PPC_T4240) += ddr-gen3.o
+COBJS-$(CONFIG_PPC_T4160) += ddr-gen3.o
COBJS-$(CONFIG_PPC_B4420) += ddr-gen3.o
COBJS-$(CONFIG_PPC_B4860) += ddr-gen3.o
COBJS-$(CONFIG_BSC9131) += ddr-gen3.o
COBJS-$(CONFIG_BSC9132) += ddr-gen3.o
+COBJS-$(CONFIG_PPC_T1040) += ddr-gen3.o
COBJS-$(CONFIG_CPM2) += ether_fcc.o
COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
@@ -102,8 +104,10 @@
COBJS-$(CONFIG_PPC_P5020) += p5020_ids.o
COBJS-$(CONFIG_PPC_P5040) += p5040_ids.o
COBJS-$(CONFIG_PPC_T4240) += t4240_ids.o
+COBJS-$(CONFIG_PPC_T4160) += t4240_ids.o
COBJS-$(CONFIG_PPC_B4420) += b4860_ids.o
COBJS-$(CONFIG_PPC_B4860) += b4860_ids.o
+COBJS-$(CONFIG_PPC_T1040) += t1040_ids.o
COBJS-$(CONFIG_QE) += qe_io.o
COBJS-$(CONFIG_CPM2) += serial_scc.o
@@ -137,9 +141,11 @@
COBJS-$(CONFIG_PPC_P5020) += p5020_serdes.o
COBJS-$(CONFIG_PPC_P5040) += p5040_serdes.o
COBJS-$(CONFIG_PPC_T4240) += t4240_serdes.o
+COBJS-$(CONFIG_PPC_T4160) += t4240_serdes.o
COBJS-$(CONFIG_PPC_B4420) += b4860_serdes.o
COBJS-$(CONFIG_PPC_B4860) += b4860_serdes.o
COBJS-$(CONFIG_BSC9132) += bsc9132_serdes.o
+COBJS-$(CONFIG_PPC_T1040) += t1040_serdes.o
COBJS-y += cpu.o
COBJS-y += cpu_init.o
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c
index 53713e3..4067f05 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
@@ -337,7 +337,7 @@
while ((in_be32(&l2cache->l2csr0)
& (L2CSR0_L2FI|L2CSR0_L2LFC)) != 0)
;
- out_be32(&l2cache->l2csr0, L2CSR0_L2E);
+ out_be32(&l2cache->l2csr0, L2CSR0_L2E|L2CSR0_L2PE|L2CSR0_L2REP_MODE);
}
i++;
} while (!(cluster & TP_CLUSTER_EOC));
@@ -637,6 +637,28 @@
}
#endif
+#if defined(CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE)
+ ccsr_usb_phy_t *usb_phy =
+ (void *)CONFIG_SYS_MPC85xx_USB1_PHY_ADDR;
+ setbits_be32(&usb_phy->pllprg[1],
+ CONFIG_SYS_FSL_USB_PLLPRG2_PHY2_CLK_EN |
+ CONFIG_SYS_FSL_USB_PLLPRG2_PHY1_CLK_EN |
+ CONFIG_SYS_FSL_USB_PLLPRG2_MFI |
+ CONFIG_SYS_FSL_USB_PLLPRG2_PLL_EN);
+ setbits_be32(&usb_phy->port1.ctrl,
+ CONFIG_SYS_FSL_USB_CTRL_PHY_EN);
+ setbits_be32(&usb_phy->port1.drvvbuscfg,
+ CONFIG_SYS_FSL_USB_DRVVBUS_CR_EN);
+ setbits_be32(&usb_phy->port1.pwrfltcfg,
+ CONFIG_SYS_FSL_USB_PWRFLT_CR_EN);
+ setbits_be32(&usb_phy->port2.ctrl,
+ CONFIG_SYS_FSL_USB_CTRL_PHY_EN);
+ setbits_be32(&usb_phy->port2.drvvbuscfg,
+ CONFIG_SYS_FSL_USB_DRVVBUS_CR_EN);
+ setbits_be32(&usb_phy->port2.pwrfltcfg,
+ CONFIG_SYS_FSL_USB_PWRFLT_CR_EN);
+#endif
+
#ifdef CONFIG_FMAN_ENET
fman_enet_init();
#endif
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
index dacfdd1..234fde4 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
@@ -180,12 +180,5 @@
invalidate_tlb(1);
-#if defined(CONFIG_SECURE_BOOT)
- /* Disable the TLBs created by ISBC */
- for (i = CONFIG_SYS_ISBC_START_TLB;
- i < CONFIG_SYS_ISBC_START_TLB + CONFIG_SYS_ISBC_NUM_TLBS; i++)
- disable_tlb(i);
-#endif
-
init_tlbs();
}
diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
index ef0dd1d..c5b4720 100644
--- a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
+++ b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
@@ -142,7 +142,7 @@
}
}
#ifdef CONFIG_SYS_FSL_ERRATUM_A_004934
- out_be32(&ddr->debug[28], 0x00003000);
+ out_be32(&ddr->debug[28], 0x30003000);
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR_A003474
diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c
index 01dcdf6..93eca76 100644
--- a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c
@@ -164,7 +164,7 @@
}
cfg >>= sd_prctl_shift;
- printf("Using SERDES%d Protocol: 0x%x\n", sd + 1, cfg);
+ printf("Using SERDES%d Protocol: %d (0x%x)\n", sd + 1, cfg, cfg);
if (!is_serdes_prtcl_valid(sd, cfg))
printf("SERDES%d[PRTCL] = 0x%x is not valid\n", sd + 1, cfg);
diff --git a/arch/powerpc/cpu/mpc85xx/mp.c b/arch/powerpc/cpu/mpc85xx/mp.c
index 43d4836..861c8e0 100644
--- a/arch/powerpc/cpu/mpc85xx/mp.c
+++ b/arch/powerpc/cpu/mpc85xx/mp.c
@@ -80,6 +80,8 @@
if (nr == id) {
table = (u32 *)&__spin_table;
printf("table base @ 0x%p\n", table);
+ } else if (is_core_disabled(nr)) {
+ puts("Disabled\n");
} else {
table = (u32 *)&__spin_table + nr * NUM_BOOT_ENTRY;
printf("Running on cpu %d\n", id);
diff --git a/arch/powerpc/cpu/mpc85xx/portals.c b/arch/powerpc/cpu/mpc85xx/portals.c
index d529095..672edde 100644
--- a/arch/powerpc/cpu/mpc85xx/portals.c
+++ b/arch/powerpc/cpu/mpc85xx/portals.c
@@ -128,24 +128,32 @@
childoff = fdt_subnode_offset(blob, off, name);
if (create) {
+ char handle[64], *p;
+
+ strncpy(handle, name, sizeof(handle));
+ p = strchr(handle, '@');
+ if (!strncmp(name, "fman", 4)) {
+ *p = *(p + 1);
+ p++;
+ }
+ *p = '\0';
+
+ dev_off = fdt_path_offset(blob, handle);
+ /* skip this node if alias is not found */
+ if (dev_off == -FDT_ERR_BADPATH)
+ return 0;
+ if (dev_off < 0)
+ return dev_off;
+
if (childoff <= 0)
childoff = fdt_add_subnode(blob, off, name);
+ /* need to update the dev_off after adding a subnode */
+ dev_off = fdt_path_offset(blob, handle);
+ if (dev_off < 0)
+ return dev_off;
+
if (childoff > 0) {
- char handle[64], *p;
-
- strncpy(handle, name, sizeof(handle));
- p = strchr(handle, '@');
- if (!strncmp(name, "fman", 4)) {
- *p = *(p + 1);
- p++;
- }
- *p = '\0';
-
- dev_off = fdt_path_offset(blob, handle);
- if (dev_off < 0)
- return dev_off;
-
dev_handle = fdt_get_phandle(blob, dev_off);
if (dev_handle <= 0) {
dev_handle = fdt_alloc_phandle(blob);
diff --git a/arch/powerpc/cpu/mpc85xx/release.S b/arch/powerpc/cpu/mpc85xx/release.S
index 5c4b1e3..a4a21b0 100644
--- a/arch/powerpc/cpu/mpc85xx/release.S
+++ b/arch/powerpc/cpu/mpc85xx/release.S
@@ -69,9 +69,9 @@
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_CPU_A003999
- mfspr r3,977
+ mfspr r3,SPRN_HDBCR1
oris r3,r3,0x0100
- mtspr 977,r3
+ mtspr SPRN_HDBCR1,r3
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_A004510
@@ -93,10 +93,10 @@
1: /* Erratum says set bits 55:60 to 001001 */
msync
isync
- mfspr r3,976
+ mfspr r3,SPRN_HDBCR0
li r4,0x48
rlwimi r3,r4,0,0x1f8
- mtspr 976,r3
+ mtspr SPRN_HDBCR0,r3
isync
2:
#endif
@@ -154,16 +154,12 @@
ori r3,r3,toreset(__spin_table_addr)@l
lwz r3,0(r3)
- /*
- * r10 has the base address for the entry.
- * we cannot access it yet before setting up a new TLB
- */
mfspr r0,SPRN_PIR
-#if defined(CONFIG_E6500)
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
/*
- * PIR definition for E6500
+ * PIR definition for Chassis 2
* 0-17 Reserved (logic 0s)
- * 8-19 CHIP_ID, 2'b00 - SoC 1
+ * 18-19 CHIP_ID, 2'b00 - SoC 1
* all others - reserved
* 20-24 CLUSTER_ID 5'b00000 - CCM 1
* all others - reserved
@@ -177,32 +173,33 @@
* 2'b11 - core 3
* 29-31 THREAD_ID 3'b000 - thread 0
* 3'b001 - thread 1
+ *
+ * Power-on PIR increments threads by 0x01, cores within a cluster by 0x08
+ * and clusters by 0x20.
+ *
+ * We renumber PIR so that all threads in the system are consecutive.
*/
- rlwinm r4,r0,29,25,31
+
+ rlwinm r8,r0,29,0x03 /* r8 = core within cluster */
+ srwi r10,r0,5 /* r10 = cluster */
+
+ mulli r5,r10,CONFIG_SYS_FSL_CORES_PER_CLUSTER
+ add r5,r5,r8 /* for spin table index */
+ mulli r4,r5,CONFIG_SYS_FSL_THREADS_PER_CORE /* for PIR */
#elif defined(CONFIG_E500MC)
rlwinm r4,r0,27,27,31
+ mr r5,r4
#else
mr r4,r0
+ mr r5,r4
#endif
- slwi r8,r4,6 /* spin table is padded to 64 byte */
- add r10,r3,r8
-#ifdef CONFIG_E6500
- mfspr r0,SPRN_PIR
/*
- * core 0 thread 0: pir reset value 0x00, new pir 0
- * core 0 thread 1: pir reset value 0x01, new pir 1
- * core 1 thread 0: pir reset value 0x08, new pir 2
- * core 1 thread 1: pir reset value 0x09, new pir 3
- * core 2 thread 0: pir reset value 0x10, new pir 4
- * core 2 thread 1: pir reset value 0x11, new pir 5
- * etc.
- *
- * Only thread 0 of each core will be running, updating PIR doesn't
- * need to deal with the thread bits.
+ * r10 has the base address for the entry.
+ * we cannot access it yet before setting up a new TLB
*/
- rlwinm r4,r0,30,24,30
-#endif
+ slwi r8,r5,6 /* spin table is padded to 64 byte */
+ add r10,r3,r8
mtspr SPRN_PIR,r4 /* write to PIR register */
diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index 297f2ed..a4d6e9c 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -112,30 +112,32 @@
#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
/*
* Each cluster has up to 4 cores, sharing the same PLL selection.
- * The cluster assignment is fixed per SoC. There is no way identify the
- * assignment so far, presuming the "first configuration" which is to
- * fill the lower cluster group first before moving up to next group.
- * PLL1, PLL2, PLL3 are cluster group A, feeding core 0~3 on cluster 1
- * and core 4~7 on cluster 2
- * PLL4, PLL5, PLL6 are cluster group B, feeding core 8~11 on cluster 3
- * and core 12~15 on cluster 4 if existing
+ * The cluster assignment is fixed per SoC. PLL1, PLL2, PLL3 are
+ * cluster group A, feeding cores on cluster 1 and cluster 2.
+ * PLL4, PLL5, PLL6 are cluster group B, feeding cores on cluster 3
+ * and cluster 4 if existing.
*/
for_each_cpu(i, cpu, cpu_numcores(), cpu_mask()) {
- u32 c_pll_sel = (in_be32(&clk->clkc0csr + (cpu / 4) * 8) >> 27)
+ int cluster = fsl_qoriq_core_to_cluster(cpu);
+ u32 c_pll_sel = (in_be32(&clk->clkcsr[cluster].clkcncsr) >> 27)
& 0xf;
u32 cplx_pll = core_cplx_PLL[c_pll_sel];
if (cplx_pll > 3)
printf("Unsupported architecture configuration"
" in function %s\n", __func__);
- cplx_pll += (cpu / 8) * 3;
-
+ cplx_pll += (cluster / 2) * 3;
sysInfo->freqProcessor[cpu] =
freqCC_PLL[cplx_pll] / core_cplx_PLL_div[c_pll_sel];
}
+#ifdef CONFIG_PPC_B4860
+#define FM1_CLK_SEL 0xe0000000
+#define FM1_CLK_SHIFT 29
+#else
#define PME_CLK_SEL 0xe0000000
#define PME_CLK_SHIFT 29
#define FM1_CLK_SEL 0x1c000000
#define FM1_CLK_SHIFT 26
+#endif
rcw_tmp = in_be32(&gur->rcwsr[7]);
#ifdef CONFIG_SYS_DPAA_PME
@@ -185,6 +187,9 @@
case 4:
sysInfo->freqFMan[0] = freqCC_PLL[3] / 4;
break;
+ case 5:
+ sysInfo->freqFMan[0] = sysInfo->freqSystemBus;
+ break;
case 6:
sysInfo->freqFMan[0] = freqCC_PLL[4] / 2;
break;
@@ -232,7 +237,8 @@
#else /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
for_each_cpu(i, cpu, cpu_numcores(), cpu_mask()) {
- u32 c_pll_sel = (in_be32(&clk->clkc0csr + cpu*8) >> 27) & 0xf;
+ u32 c_pll_sel = (in_be32(&clk->clkcsr[cpu].clkcncsr) >> 27)
+ & 0xf;
u32 cplx_pll = core_cplx_PLL[c_pll_sel];
sysInfo->freqProcessor[cpu] =
@@ -285,6 +291,10 @@
#endif
#endif
+#ifdef CONFIG_SYS_DPAA_QBMAN
+ sysInfo->freqQMAN = sysInfo->freqSystemBus / 2;
+#endif
+
#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
#else /* CONFIG_FSL_CORENET */
diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S
index 3f76ee6..4f0480b 100644
--- a/arch/powerpc/cpu/mpc85xx/start.S
+++ b/arch/powerpc/cpu/mpc85xx/start.S
@@ -116,10 +116,10 @@
/* Erratum says set bits 55:60 to 001001 */
msync
isync
- mfspr r3,976
+ mfspr r3,SPRN_HDBCR0
li r4,0x48
rlwimi r3,r4,0,0x1f8
- mtspr 976,r3
+ mtspr SPRN_HDBCR0,r3
isync
2:
#endif
@@ -173,52 +173,6 @@
mfspr r1,DBSR
mtspr DBSR,r1 /* Clear all valid bits */
- /*
- * Enable L1 Caches early
- *
- */
-
-#ifdef CONFIG_SYS_CACHE_STASHING
- /* set stash id to (coreID) * 2 + 32 + L1 CT (0) */
- li r2,(32 + 0)
- mtspr L1CSR2,r2
-#endif
-
- /* Enable/invalidate the I-Cache */
- lis r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@h
- ori r2,r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@l
- mtspr SPRN_L1CSR1,r2
-1:
- mfspr r3,SPRN_L1CSR1
- and. r1,r3,r2
- bne 1b
-
- lis r3,(L1CSR1_CPE|L1CSR1_ICE)@h
- ori r3,r3,(L1CSR1_CPE|L1CSR1_ICE)@l
- mtspr SPRN_L1CSR1,r3
- isync
-2:
- mfspr r3,SPRN_L1CSR1
- andi. r1,r3,L1CSR1_ICE@l
- beq 2b
-
- /* Enable/invalidate the D-Cache */
- lis r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@h
- ori r2,r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@l
- mtspr SPRN_L1CSR0,r2
-1:
- mfspr r3,SPRN_L1CSR0
- and. r1,r3,r2
- bne 1b
-
- lis r3,(L1CSR0_CPE|L1CSR0_DCE)@h
- ori r3,r3,(L1CSR0_CPE|L1CSR0_DCE)@l
- mtspr SPRN_L1CSR0,r3
- isync
-2:
- mfspr r3,SPRN_L1CSR0
- andi. r1,r3,L1CSR0_DCE@l
- beq 2b
.macro create_tlb1_entry esel ts tsize epn wimg rpn perm phy_high scratch
lis \scratch, FSL_BOOKE_MAS0(1, \esel, 0)@h
@@ -372,9 +326,9 @@
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_CPU_A003999
- mfspr r3,977
+ mfspr r3,SPRN_HDBCR1
oris r3,r3,0x0100
- mtspr 977,r3
+ mtspr SPRN_HDBCR1,r3
#endif
/* Enable Branch Prediction */
@@ -780,13 +734,60 @@
isync
and. r1, r0, r4
bne 1b
- lis r4, L2CSR0_L2E@h
+ lis r4, (L2CSR0_L2E|L2CSR0_L2PE)@h
+ ori r4, r4, (L2CSR0_L2REP_MODE)@l
sync
- stw r4, 0(r3) /* eanble L2 */
+ stw r4, 0(r3) /* enable L2 */
delete_ccsr_l2_tlb:
delete_tlb0_entry 0, CONFIG_SYS_CCSRBAR + 0xC20000, MAS2_I|MAS2_G, r3
#endif
+ /*
+ * Enable the L1. On e6500, this has to be done
+ * after the L2 is up.
+ */
+
+#ifdef CONFIG_SYS_CACHE_STASHING
+ /* set stash id to (coreID) * 2 + 32 + L1 CT (0) */
+ li r2,(32 + 0)
+ mtspr L1CSR2,r2
+#endif
+
+ /* Enable/invalidate the I-Cache */
+ lis r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@h
+ ori r2,r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@l
+ mtspr SPRN_L1CSR1,r2
+1:
+ mfspr r3,SPRN_L1CSR1
+ and. r1,r3,r2
+ bne 1b
+
+ lis r3,(L1CSR1_CPE|L1CSR1_ICE)@h
+ ori r3,r3,(L1CSR1_CPE|L1CSR1_ICE)@l
+ mtspr SPRN_L1CSR1,r3
+ isync
+2:
+ mfspr r3,SPRN_L1CSR1
+ andi. r1,r3,L1CSR1_ICE@l
+ beq 2b
+
+ /* Enable/invalidate the D-Cache */
+ lis r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@h
+ ori r2,r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@l
+ mtspr SPRN_L1CSR0,r2
+1:
+ mfspr r3,SPRN_L1CSR0
+ and. r1,r3,r2
+ bne 1b
+
+ lis r3,(L1CSR0_CPE|L1CSR0_DCE)@h
+ ori r3,r3,(L1CSR0_CPE|L1CSR0_DCE)@l
+ mtspr SPRN_L1CSR0,r3
+ isync
+2:
+ mfspr r3,SPRN_L1CSR0
+ andi. r1,r3,L1CSR0_DCE@l
+ beq 2b
#ifdef CONFIG_SYS_FSL_ERRATUM_A004510
#define DCSR_LAWBARH0 (CONFIG_SYS_CCSRBAR + 0x1000)
#define LAW_SIZE_1M 0x13
@@ -1905,6 +1906,7 @@
slwi r4,r4,(10 - 1 - L1_CACHE_SHIFT)
mtctr r4
1: dcbi r0,r3
+ dcblc r0,r3
addi r3,r3,CONFIG_SYS_CACHELINE_SIZE
bdnz 1b
sync
diff --git a/arch/powerpc/cpu/mpc85xx/t1040_ids.c b/arch/powerpc/cpu/mpc85xx/t1040_ids.c
new file mode 100644
index 0000000..ed61599
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/t1040_ids.c
@@ -0,0 +1,135 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_portals.h>
+#include <asm/fsl_liodn.h>
+
+#ifdef CONFIG_SYS_DPAA_QBMAN
+struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = {
+ /* dqrr liodn, frame data liodn, liodn off, sdest */
+ SET_QP_INFO(1, 27, 1, 0),
+ SET_QP_INFO(2, 28, 1, 0),
+ SET_QP_INFO(3, 29, 1, 1),
+ SET_QP_INFO(4, 30, 1, 1),
+ SET_QP_INFO(5, 31, 1, 2),
+ SET_QP_INFO(6, 32, 1, 2),
+ SET_QP_INFO(7, 33, 1, 3),
+ SET_QP_INFO(8, 34, 1, 3),
+ SET_QP_INFO(9, 35, 1, 0),
+ SET_QP_INFO(10, 36, 1, 0),
+ SET_QP_INFO(11, 37, 1, 1),
+ SET_QP_INFO(12, 38, 1, 1),
+ SET_QP_INFO(13, 39, 1, 2),
+ SET_QP_INFO(14, 40, 1, 2),
+ SET_QP_INFO(15, 41, 1, 3),
+ SET_QP_INFO(16, 42, 1, 3),
+ SET_QP_INFO(17, 43, 1, 0),
+ SET_QP_INFO(18, 44, 1, 0),
+ SET_QP_INFO(19, 45, 1, 1),
+ SET_QP_INFO(20, 46, 1, 1),
+ SET_QP_INFO(21, 47, 1, 2),
+ SET_QP_INFO(22, 48, 1, 2),
+ SET_QP_INFO(23, 49, 1, 3),
+ SET_QP_INFO(24, 50, 1, 3),
+ SET_QP_INFO(25, 51, 1, 0),
+};
+#endif
+
+struct srio_liodn_id_table srio_liodn_tbl[] = {
+ SET_SRIO_LIODN_1(1, 307),
+ SET_SRIO_LIODN_1(2, 387),
+};
+int srio_liodn_tbl_sz = ARRAY_SIZE(srio_liodn_tbl);
+
+struct liodn_id_table liodn_tbl[] = {
+#ifdef CONFIG_SYS_DPAA_QBMAN
+ SET_QMAN_LIODN(62),
+ SET_BMAN_LIODN(63),
+#endif
+
+ SET_SDHC_LIODN(1, 552),
+
+ SET_USB_LIODN(1, "fsl-usb2-mph", 553),
+
+ SET_PCI_LIODN("fsl,qoriq-pcie-v2.2", 1, 148),
+
+ SET_DMA_LIODN(1, 147),
+ SET_DMA_LIODN(2, 227),
+
+ SET_GUTS_LIODN("fsl,rapidio-delta", 199, rio1liodnr, 0),
+ SET_GUTS_LIODN(NULL, 200, rio2liodnr, 0),
+ SET_GUTS_LIODN(NULL, 201, rio1maintliodnr, 0),
+ SET_GUTS_LIODN(NULL, 202, rio2maintliodnr, 0),
+
+ /* SET_NEXUS_LIODN(557), -- not yet implemented */
+};
+int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl);
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+struct liodn_id_table fman1_liodn_tbl[] = {
+ SET_FMAN_RX_1G_LIODN(1, 0, 88),
+ SET_FMAN_RX_1G_LIODN(1, 1, 89),
+ SET_FMAN_RX_1G_LIODN(1, 2, 90),
+ SET_FMAN_RX_1G_LIODN(1, 3, 91),
+ SET_FMAN_RX_1G_LIODN(1, 4, 92),
+ SET_FMAN_RX_1G_LIODN(1, 5, 93),
+ SET_FMAN_RX_10G_LIODN(1, 0, 94),
+ SET_FMAN_RX_10G_LIODN(1, 1, 95),
+};
+int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl);
+#endif
+
+struct liodn_id_table sec_liodn_tbl[] = {
+ SET_SEC_JR_LIODN_ENTRY(0, 454, 458),
+ SET_SEC_JR_LIODN_ENTRY(1, 455, 459),
+ SET_SEC_JR_LIODN_ENTRY(2, 456, 460),
+ SET_SEC_JR_LIODN_ENTRY(3, 457, 461),
+ SET_SEC_RTIC_LIODN_ENTRY(a, 453),
+ SET_SEC_RTIC_LIODN_ENTRY(b, 549),
+ SET_SEC_RTIC_LIODN_ENTRY(c, 550),
+ SET_SEC_RTIC_LIODN_ENTRY(d, 551),
+ SET_SEC_DECO_LIODN_ENTRY(0, 541, 610),
+ SET_SEC_DECO_LIODN_ENTRY(1, 542, 611),
+};
+int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl);
+
+#ifdef CONFIG_SYS_DPAA_RMAN
+struct liodn_id_table rman_liodn_tbl[] = {
+ /* Set RMan block 0-3 liodn offset */
+ SET_RMAN_LIODN(0, 678),
+ SET_RMAN_LIODN(1, 679),
+ SET_RMAN_LIODN(2, 680),
+ SET_RMAN_LIODN(3, 681),
+};
+int rman_liodn_tbl_sz = ARRAY_SIZE(rman_liodn_tbl);
+#endif
+
+struct liodn_id_table liodn_bases[] = {
+ [FSL_HW_PORTAL_SEC] = SET_LIODN_BASE_2(462, 558),
+#ifdef CONFIG_SYS_DPAA_FMAN
+ [FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(973),
+#endif
+#ifdef CONFIG_SYS_DPAA_RMAN
+ [FSL_HW_PORTAL_RMAN] = SET_LIODN_BASE_1(922),
+#endif
+};
diff --git a/arch/powerpc/cpu/mpc85xx/t1040_serdes.c b/arch/powerpc/cpu/mpc85xx/t1040_serdes.c
new file mode 100644
index 0000000..8261e03
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/t1040_serdes.c
@@ -0,0 +1,93 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_serdes.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include "fsl_corenet2_serdes.h"
+
+static u8 serdes_cfg_tbl[MAX_SERDES][0xC4][SRDS_MAX_LANES] = {
+ { /* SerDes 1 */
+ [0x69] = {PCIE1, SGMII_FM1_DTSEC3, QSGMII_SW1_A, QSGMII_SW1_B,
+ PCIE2, PCIE3, SGMII_FM1_DTSEC4, SATA1},
+ [0x66] = {PCIE1, SGMII_FM1_DTSEC3, QSGMII_SW1_A, QSGMII_SW1_B,
+ PCIE2, PCIE3, PCIE4, SATA1},
+ [0x67] = {PCIE1, SGMII_FM1_DTSEC3, QSGMII_SW1_A, QSGMII_SW1_B,
+ PCIE2, PCIE3, PCIE4, SGMII_FM1_DTSEC5},
+ [0x60] = {PCIE1, SGMII_FM1_DTSEC3, QSGMII_SW1_A, QSGMII_SW1_B,
+ PCIE2, PCIE2, PCIE2, PCIE2},
+ [0x8D] = {PCIE1, SGMII_SW1_DTSEC3, SGMII_SW1_DTSEC1, SGMII_SW1_DTSEC2,
+ PCIE2, SGMII_SW1_DTSEC6, SGMII_SW1_DTSEC4, SGMII_SW1_DTSEC5},
+ [0x89] = {PCIE1, SGMII_SW1_DTSEC3, SGMII_SW1_DTSEC1, SGMII_SW1_DTSEC2,
+ PCIE2, PCIE3, SGMII_SW1_DTSEC4, SATA1},
+ [0x86] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ PCIE2, PCIE3, PCIE4, SATA1},
+ [0x87] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ PCIE2, PCIE3, PCIE4, SGMII_FM1_DTSEC5},
+ [0xA7] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ PCIE2, PCIE3, PCIE4, SGMII_FM1_DTSEC5},
+ [0xAA] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ PCIE2, PCIE3, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5},
+ [0x40] = {PCIE1, PCIE1, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ PCIE2, PCIE2, PCIE2, PCIE2},
+ [0x06] = {PCIE1, PCIE1, PCIE1, PCIE1,
+ PCIE2, PCIE3, PCIE4, SATA1},
+ [0x08] = {PCIE1, PCIE1, PCIE1, PCIE1,
+ PCIE2, PCIE3, SATA2, SATA1},
+ [0x8F] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ AURORA, NONE, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5},
+ [0x85] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ PCIE2, PCIE2, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5},
+ [0xA5] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ PCIE2, PCIE2, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5},
+ [0x00] = {PCIE1, PCIE1, PCIE1, PCIE1,
+ PCIE2, PCIE2, PCIE2, PCIE2},
+ },
+ {
+ },
+ {
+ },
+ {
+ },
+};
+
+
+enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane)
+{
+ return serdes_cfg_tbl[serdes][cfg][lane];
+}
+
+int is_serdes_prtcl_valid(int serdes, u32 prtcl)
+{
+ int i;
+
+ if (prtcl > (ARRAY_SIZE(serdes_cfg_tbl[serdes])))
+ return 0;
+
+ for (i = 0; i < SRDS_MAX_LANES; i++) {
+ if (serdes_cfg_tbl[serdes][prtcl][i] != NONE)
+ return 1;
+ }
+
+ return 0;
+}
diff --git a/arch/powerpc/cpu/mpc85xx/t4240_serdes.c b/arch/powerpc/cpu/mpc85xx/t4240_serdes.c
index 102defa..c001780 100644
--- a/arch/powerpc/cpu/mpc85xx/t4240_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/t4240_serdes.c
@@ -31,7 +31,8 @@
u8 lanes[SRDS_MAX_LANES];
};
-static struct serdes_config serdes1_cfg_tbl[] = {
+#ifdef CONFIG_PPC_T4240
+static const struct serdes_config serdes1_cfg_tbl[] = {
/* SerDes 1 */
{1, {XAUI_FM1_MAC9, XAUI_FM1_MAC9,
XAUI_FM1_MAC9, XAUI_FM1_MAC9,
@@ -66,7 +67,7 @@
NONE, NONE, QSGMII_FM1_A, NONE}},
{}
};
-static struct serdes_config serdes2_cfg_tbl[] = {
+static const struct serdes_config serdes2_cfg_tbl[] = {
/* SerDes 2 */
{1, {XAUI_FM2_MAC9, XAUI_FM2_MAC9,
XAUI_FM2_MAC9, XAUI_FM2_MAC9,
@@ -150,7 +151,7 @@
SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
{}
};
-static struct serdes_config serdes3_cfg_tbl[] = {
+static const struct serdes_config serdes3_cfg_tbl[] = {
/* SerDes 3 */
{2, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1}},
{4, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2}},
@@ -174,20 +175,151 @@
SRIO1, SRIO1, SRIO1, SRIO1}},
{}
};
-static struct serdes_config serdes4_cfg_tbl[] = {
+static const struct serdes_config serdes4_cfg_tbl[] = {
/* SerDes 4 */
{2, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3}},
{4, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, PCIE4, PCIE4}},
{6, {PCIE3, PCIE3, PCIE3, PCIE3, SRIO2, SRIO2, SRIO2, SRIO2}},
{8, {PCIE3, PCIE3, PCIE3, PCIE3, SRIO2, SRIO2, SRIO2, SRIO2}},
- {10, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, SATA1, SATA1}},
- {12, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SATA1, SATA1}},
+ {10, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, SATA1, SATA2} },
+ {12, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SATA1, SATA2} },
{14, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SRIO2, SRIO2}},
{16, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SRIO2, SRIO2}},
{18, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, AURORA, AURORA}},
{}
};
-static struct serdes_config *serdes_cfg_tbl[] = {
+#elif defined(CONFIG_PPC_T4160)
+static const struct serdes_config serdes1_cfg_tbl[] = {
+ /* SerDes 1 */
+ {1, {XAUI_FM1_MAC9, XAUI_FM1_MAC9,
+ XAUI_FM1_MAC9, XAUI_FM1_MAC9,
+ XAUI_FM1_MAC10, XAUI_FM1_MAC10,
+ XAUI_FM1_MAC10, XAUI_FM1_MAC10} },
+ {2, {HIGIG_FM1_MAC9, HIGIG_FM1_MAC9,
+ HIGIG_FM1_MAC9, HIGIG_FM1_MAC9,
+ HIGIG_FM1_MAC10, HIGIG_FM1_MAC10,
+ HIGIG_FM1_MAC10, HIGIG_FM1_MAC10} },
+ {4, {HIGIG_FM1_MAC9, HIGIG_FM1_MAC9,
+ HIGIG_FM1_MAC9, HIGIG_FM1_MAC9,
+ HIGIG_FM1_MAC10, HIGIG_FM1_MAC10,
+ HIGIG_FM1_MAC10, HIGIG_FM1_MAC10} },
+ {28, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6,
+ SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9,
+ SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4} },
+ {36, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6,
+ SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9,
+ SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4} },
+ {38, {NONE, NONE, QSGMII_FM1_B, NONE,
+ NONE, NONE, QSGMII_FM1_A, NONE} },
+ {}
+};
+static const struct serdes_config serdes2_cfg_tbl[] = {
+ /* SerDes 2 */
+ {7, {XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+ XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} },
+ {13, {XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+ XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} },
+ {16, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} },
+ {22, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} },
+ {25, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} },
+ {26, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ NONE, NONE} },
+ {28, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
+ SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} },
+ {36, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
+ SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} },
+ {38, {NONE, NONE, QSGMII_FM2_B, NONE,
+ NONE, QSGMII_FM1_A, NONE, NONE} },
+ {40, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
+ SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
+ NONE, QSGMII_FM1_A, NONE, NONE} },
+ {46, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
+ SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
+ NONE, QSGMII_FM1_A, NONE, NONE} },
+ {48, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
+ SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
+ NONE, QSGMII_FM1_A, NONE, NONE} },
+ {50, {XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+ XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+ NONE, NONE, NONE, NONE} },
+ {52, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ NONE, NONE, NONE, NONE} },
+ {54, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ NONE, NONE, NONE, NONE} },
+ {56, {NONE, XFI_FM1_MAC10,
+ XFI_FM2_MAC10, NONE,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} },
+ {57, {NONE, XFI_FM1_MAC10,
+ XFI_FM2_MAC10, NONE,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ NONE, NONE} },
+ {}
+};
+static const struct serdes_config serdes3_cfg_tbl[] = {
+ /* SerDes 3 */
+ {2, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1} },
+ {4, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2} },
+ {6, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1} },
+ {8, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, NONE, NONE, NONE} },
+ {9, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+ INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN} },
+ {10, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+ INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN} },
+ {12, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+ PCIE2, PCIE2, PCIE2, PCIE2} },
+ {14, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+ PCIE2, PCIE2, PCIE2, PCIE2} },
+ {16, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+ SRIO1, SRIO1, SRIO1, SRIO1} },
+ {17, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+ SRIO1, SRIO1, SRIO1, SRIO1} },
+ {19, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+ SRIO1, SRIO1, SRIO1, SRIO1} },
+ {20, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+ NONE, NONE, NONE, NONE} },
+ {}
+};
+static const struct serdes_config serdes4_cfg_tbl[] = {
+ /* SerDes 4 */
+ {4, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, PCIE4, PCIE4} },
+ {6, {SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2} },
+ {8, {SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2} },
+ {10, {PCIE3, PCIE3, PCIE3, PCIE3, SATA1, SATA1, SATA2, SATA2} },
+ {12, {AURORA, AURORA, AURORA, AURORA, SATA1, SATA1, SATA2, SATA2} },
+ {14, {AURORA, AURORA, AURORA, AURORA, SRIO2, SRIO2, SRIO2, SRIO2} },
+ {16, {AURORA, AURORA, AURORA, AURORA, SRIO2, SRIO2, SRIO2, SRIO2} },
+ {18, {AURORA, AURORA, AURORA, AURORA, AURORA, AURORA, AURORA, AURORA} },
+ {}
+}
+;
+#else
+#error "Need to define SerDes protocol"
+#endif
+static const struct serdes_config *serdes_cfg_tbl[] = {
serdes1_cfg_tbl,
serdes2_cfg_tbl,
serdes3_cfg_tbl,
@@ -196,7 +328,7 @@
enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane)
{
- struct serdes_config *ptr;
+ const struct serdes_config *ptr;
if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
return 0;
@@ -213,7 +345,7 @@
int is_serdes_prtcl_valid(int serdes, u32 prtcl)
{
int i;
- struct serdes_config *ptr;
+ const struct serdes_config *ptr;
if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
return 0;
diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c
index 39525fb..bc26855 100644
--- a/arch/powerpc/cpu/mpc8xxx/cpu.c
+++ b/arch/powerpc/cpu/mpc8xxx/cpu.c
@@ -77,6 +77,7 @@
CPU_TYPE_ENTRY(P5040, P5040, 4),
CPU_TYPE_ENTRY(T4240, T4240, 0),
CPU_TYPE_ENTRY(T4120, T4120, 0),
+ CPU_TYPE_ENTRY(T4160, T4160, 0),
CPU_TYPE_ENTRY(B4860, B4860, 0),
CPU_TYPE_ENTRY(G4860, G4860, 0),
CPU_TYPE_ENTRY(G4060, G4060, 0),
@@ -84,6 +85,12 @@
CPU_TYPE_ENTRY(G4440, G4440, 0),
CPU_TYPE_ENTRY(B4420, B4420, 0),
CPU_TYPE_ENTRY(B4220, B4220, 0),
+ CPU_TYPE_ENTRY(T1040, T1040, 0),
+ CPU_TYPE_ENTRY(T1041, T1041, 0),
+ CPU_TYPE_ENTRY(T1042, T1042, 0),
+ CPU_TYPE_ENTRY(T1020, T1020, 0),
+ CPU_TYPE_ENTRY(T1021, T1021, 0),
+ CPU_TYPE_ENTRY(T1022, T1022, 0),
CPU_TYPE_ENTRY(BSC9130, 9130, 1),
CPU_TYPE_ENTRY(BSC9131, 9131, 1),
CPU_TYPE_ENTRY(BSC9132, 9132, 2),
@@ -96,35 +103,70 @@
};
#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+static inline u32 init_type(u32 cluster, int init_id)
+{
+ ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 idx = (cluster >> (init_id * 8)) & TP_CLUSTER_INIT_MASK;
+ u32 type = in_be32(&gur->tp_ityp[idx]);
+
+ if (type & TP_ITYP_AV)
+ return type;
+
+ return 0;
+}
+
u32 compute_ppc_cpumask(void)
{
- ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
int i = 0, count = 0;
- u32 cluster, mask = 0;
+ u32 cluster, type, mask = 0;
do {
int j;
- cluster = in_be32(&gur->tp_cluster[i++].lower);
- for (j = 0; j < 4; j++) {
- u32 idx = (cluster >> (j*8)) & TP_CLUSTER_INIT_MASK;
- u32 type = in_be32(&gur->tp_ityp[idx]);
-
- if (type & TP_ITYP_AV) {
+ cluster = in_be32(&gur->tp_cluster[i].lower);
+ for (j = 0; j < TP_INIT_PER_CLUSTER; j++) {
+ type = init_type(cluster, j);
+ if (type) {
if (TP_ITYP_TYPE(type) == TP_ITYP_TYPE_PPC)
mask |= 1 << count;
+ count++;
}
- count++;
}
+ i++;
} while ((cluster & TP_CLUSTER_EOC) != TP_CLUSTER_EOC);
return mask;
}
+
+int fsl_qoriq_core_to_cluster(unsigned int core)
+{
+ ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ int i = 0, count = 0;
+ u32 cluster;
+
+ do {
+ int j;
+ cluster = in_be32(&gur->tp_cluster[i].lower);
+ for (j = 0; j < TP_INIT_PER_CLUSTER; j++) {
+ if (init_type(cluster, j)) {
+ if (count == core)
+ return i;
+ count++;
+ }
+ }
+ i++;
+ } while ((cluster & TP_CLUSTER_EOC) != TP_CLUSTER_EOC);
+
+ return -1; /* cannot identify the cluster */
+}
+
#else /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
/*
* Before chassis genenration 2, the cpumask should be hard-coded.
* In case of cpu type unknown or cpumask unset, use 1 as fail save.
*/
#define compute_ppc_cpumask() 1
+#define fsl_qoriq_core_to_cluster(x) x
#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
static struct cpu_type cpu_type_unknown = CPU_TYPE_ENTRY(Unknown, Unknown, 0);
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c
index 9adde31..e958e13 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c
@@ -44,7 +44,6 @@
printf("DDR clock (MCLK cycle %u ps) is faster than "
"the slowest DIMM(s) (tCKmin %u ps) can support.\n",
mclk_ps, tCKmin_X_ps);
- return 1;
}
/* determine the acutal cas latency */
caslat_actual = (tAAmin_ps + mclk_ps - 1) / mclk_ps;
@@ -60,7 +59,6 @@
if (caslat_actual * mclk_ps > 20000) {
printf("The choosen cas latency %d is too large\n",
caslat_actual);
- return 1;
}
outpdimm->lowest_common_SPD_caslat = caslat_actual;
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/main.c b/arch/powerpc/cpu/mpc8xxx/ddr/main.c
index 5311a26..7a8636d 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/main.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/main.c
@@ -186,7 +186,7 @@
return step_string_tbl[s];
}
-unsigned long long step_assign_addresses(fsl_ddr_info_t *pinfo,
+static unsigned long long __step_assign_addresses(fsl_ddr_info_t *pinfo,
unsigned int dbw_cap_adj[])
{
int i, j;
@@ -354,6 +354,11 @@
return total_mem;
}
+/* Use weak function to allow board file to override the address assignment */
+__attribute__((weak, alias("__step_assign_addresses")))
+unsigned long long step_assign_addresses(fsl_ddr_info_t *pinfo,
+ unsigned int dbw_cap_adj[]);
+
unsigned long long
fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step,
unsigned int size_only)
@@ -541,14 +546,17 @@
total_memory = fsl_ddr_compute(&info, STEP_GET_SPD, 0);
/* setup 3-way interleaving before enabling DDRC */
- switch (info.memctl_opts[0].memctl_interleaving_mode) {
- case FSL_DDR_3WAY_1KB_INTERLEAVING:
- case FSL_DDR_3WAY_4KB_INTERLEAVING:
- case FSL_DDR_3WAY_8KB_INTERLEAVING:
- fsl_ddr_set_intl3r(info.memctl_opts[0].memctl_interleaving_mode);
- break;
- default:
- break;
+ if (info.memctl_opts[0].memctl_interleaving) {
+ switch (info.memctl_opts[0].memctl_interleaving_mode) {
+ case FSL_DDR_3WAY_1KB_INTERLEAVING:
+ case FSL_DDR_3WAY_4KB_INTERLEAVING:
+ case FSL_DDR_3WAY_8KB_INTERLEAVING:
+ fsl_ddr_set_intl3r(
+ info.memctl_opts[0].memctl_interleaving_mode);
+ break;
+ default:
+ break;
+ }
}
/* Program configuration registers. */
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 7267611..1009a31 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -512,23 +512,34 @@
#define CONFIG_SYS_FSL_ESDHC_P1010_BROKEN_SDCLK
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2"
-#elif defined(CONFIG_PPC_T4240)
+#elif defined(CONFIG_PPC_T4240) || defined(CONFIG_PPC_T4160)
+#define CONFIG_E6500
#define CONFIG_SYS_PPC64 /* 64-bit core */
#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */
#define CONFIG_SYS_FSL_QORIQ_CHASSIS2 /* Freescale Chassis generation 2 */
+#define CONFIG_SYS_FSL_CORES_PER_CLUSTER 4
#define CONFIG_SYS_FSL_QMAN_V3 /* QMAN version 3 */
+#ifdef CONFIG_PPC_T4240
#define CONFIG_MAX_CPUS 12
+#define CONFIG_SYS_NUM_FM1_DTSEC 8
+#define CONFIG_SYS_NUM_FM1_10GEC 2
+#define CONFIG_SYS_NUM_FM2_DTSEC 8
+#define CONFIG_SYS_NUM_FM2_10GEC 2
+#define CONFIG_NUM_DDR_CONTROLLERS 3
+#else
+#define CONFIG_MAX_CPUS 8
+#define CONFIG_SYS_NUM_FM1_DTSEC 7
+#define CONFIG_SYS_NUM_FM1_10GEC 1
+#define CONFIG_SYS_NUM_FM2_DTSEC 7
+#define CONFIG_SYS_NUM_FM2_10GEC 1
+#define CONFIG_NUM_DDR_CONTROLLERS 2
+#endif
#define CONFIG_SYS_FSL_NUM_CC_PLLS 5
#define CONFIG_SYS_FSL_NUM_LAWS 32
#define CONFIG_SYS_FSL_SRDS_3
#define CONFIG_SYS_FSL_SRDS_4
#define CONFIG_SYS_FSL_SEC_COMPAT 4
#define CONFIG_SYS_NUM_FMAN 2
-#define CONFIG_SYS_NUM_FM1_DTSEC 8
-#define CONFIG_SYS_NUM_FM1_10GEC 2
-#define CONFIG_SYS_NUM_FM2_DTSEC 8
-#define CONFIG_SYS_NUM_FM2_10GEC 2
-#define CONFIG_NUM_DDR_CONTROLLERS 3
#define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_4_7
#define CONFIG_SYS_FMAN_V3
#define CONFIG_SYS_FM_MURAM_SIZE 0x60000
@@ -537,26 +548,23 @@
#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
-#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
-#define CONFIG_SYS_FSL_USB2_PHY_ENABLE
+#define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE
#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
#define CONFIG_SYS_FSL_ERRATUM_A004468
#define CONFIG_SYS_FSL_ERRATUM_A_004934
#define CONFIG_SYS_FSL_ERRATUM_A005871
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
+#define CONFIG_SYS_FSL_PCI_VER_3_X
-#elif defined(CONFIG_PPC_B4420)
+#elif defined(CONFIG_PPC_B4860) || defined(CONFIG_PPC_B4420)
+#define CONFIG_E6500
#define CONFIG_SYS_PPC64 /* 64-bit core */
#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */
#define CONFIG_SYS_FSL_QORIQ_CHASSIS2 /* Freescale Chassis generation 2 */
#define CONFIG_SYS_FSL_QMAN_V3 /* QMAN version 3 */
-#define CONFIG_MAX_CPUS 2
-#define CONFIG_SYS_FSL_NUM_CC_PLLS 4
#define CONFIG_SYS_FSL_NUM_LAWS 32
#define CONFIG_SYS_FSL_SEC_COMPAT 4
#define CONFIG_SYS_NUM_FMAN 1
-#define CONFIG_SYS_NUM_FM1_DTSEC 4
-#define CONFIG_NUM_DDR_CONTROLLERS 1
#define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_4_7
#define CONFIG_SYS_FMAN_V3
#define CONFIG_SYS_FM_MURAM_SIZE 0x60000
@@ -567,30 +575,50 @@
#define CONFIG_SYS_FSL_ERRATUM_A005871
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
-#elif defined(CONFIG_PPC_B4860)
-#define CONFIG_SYS_PPC64 /* 64-bit core */
-#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */
-#define CONFIG_SYS_FSL_QORIQ_CHASSIS2 /* Freescale Chassis generation 2 */
-#define CONFIG_SYS_FSL_QMAN_V3 /* QMAN version 3 */
+#ifdef CONFIG_PPC_B4860
+#define CONFIG_SYS_FSL_CORES_PER_CLUSTER 4
#define CONFIG_MAX_CPUS 4
#define CONFIG_SYS_FSL_NUM_CC_PLLS 4
-#define CONFIG_SYS_FSL_NUM_LAWS 32
-#define CONFIG_SYS_FSL_SEC_COMPAT 4
-#define CONFIG_SYS_NUM_FMAN 1
#define CONFIG_SYS_NUM_FM1_DTSEC 6
#define CONFIG_SYS_NUM_FM1_10GEC 2
#define CONFIG_NUM_DDR_CONTROLLERS 2
+#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
+#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
+#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
+#else
+#define CONFIG_MAX_CPUS 2
+#define CONFIG_SYS_FSL_CORES_PER_CLUSTER 2
+#define CONFIG_SYS_FSL_NUM_CC_PLLS 4
+#define CONFIG_SYS_NUM_FM1_DTSEC 4
+#define CONFIG_SYS_NUM_FM1_10GEC 0
+#define CONFIG_NUM_DDR_CONTROLLERS 1
+#endif
+
+#elif defined(CONFIG_PPC_T1040)
+#define CONFIG_E5500
+#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */
+#define CONFIG_SYS_FSL_QORIQ_CHASSIS2 /* Freescale Chassis generation 2 */
+#define CONFIG_SYS_FSL_CORES_PER_CLUSTER 1
+#define CONFIG_SYS_FSL_QMAN_V3 /* QMAN version 3 */
+#define CONFIG_MAX_CPUS 4
+#define CONFIG_SYS_FSL_NUM_CC_PLLS 5
+#define CONFIG_SYS_FSL_NUM_LAWS 16
+#define CONFIG_SYS_FSL_SEC_COMPAT 4
+#define CONFIG_SYS_NUM_FMAN 1
+#define CONFIG_SYS_NUM_FM1_DTSEC 5
+#define CONFIG_NUM_DDR_CONTROLLERS 1
#define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_4_7
+#define CONFIG_SYS_FSL_IFC_BANK_COUNT 4
#define CONFIG_SYS_FMAN_V3
-#define CONFIG_SYS_FM_MURAM_SIZE 0x60000
-#define CONFIG_SYS_FSL_TBCLK_DIV 16
+#define CONFIG_SYS_FM_MURAM_SIZE 0x28000
+#define CONFIG_SYS_FSL_TBCLK_DIV 32
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.4"
#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
-#define CONFIG_SYS_FSL_ERRATUM_A_004934
-#define CONFIG_SYS_FSL_ERRATUM_A005871
+#define CONFIG_SYS_FSL_USB2_PHY_ENABLE
+#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
#else
@@ -601,4 +629,10 @@
#error "CONFIG_SYS_CCSRBAR_DEFAULT is not defined for this platform."
#endif
+#ifdef CONFIG_E6500
+#define CONFIG_SYS_FSL_THREADS_PER_CORE 2
+#else
+#define CONFIG_SYS_FSL_THREADS_PER_CORE 1
+#endif
+
#endif /* _ASM_MPC85xx_CONFIG_H_ */
diff --git a/arch/powerpc/include/asm/fsl_law.h b/arch/powerpc/include/asm/fsl_law.h
index f9cec8e..90b264d 100644
--- a/arch/powerpc/include/asm/fsl_law.h
+++ b/arch/powerpc/include/asm/fsl_law.h
@@ -70,6 +70,8 @@
LAW_TRGT_IF_DCSR = 0x1d,
LAW_TRGT_IF_LBC = 0x1f,
LAW_TRGT_IF_QMAN = 0x3c,
+
+ LAW_TRGT_IF_MAPLE = 0x50,
};
#define LAW_TRGT_IF_DDR LAW_TRGT_IF_DDR_1
#define LAW_TRGT_IF_IFC LAW_TRGT_IF_LBC
diff --git a/arch/powerpc/include/asm/fsl_secure_boot.h b/arch/powerpc/include/asm/fsl_secure_boot.h
index d1c1967..2bc6ed1 100644
--- a/arch/powerpc/include/asm/fsl_secure_boot.h
+++ b/arch/powerpc/include/asm/fsl_secure_boot.h
@@ -23,16 +23,6 @@
#ifndef __FSL_SECURE_BOOT_H
#define __FSL_SECURE_BOOT_H
-/* Starting TLB number for the TLB entried for 3.5 G space created by ISBC */
-#if defined(CONFIG_FSL_CORENET)
-#define CONFIG_SYS_ISBC_START_TLB 3
-#else
-#define CONFIG_SYS_ISBC_START_TLB 0
-#endif
-
-/* Number fo TLB's created by ISBC */
-#define CONFIG_SYS_ISBC_NUM_TLBS 5
-
#if defined(CONFIG_FSL_CORENET)
#define CONFIG_SYS_PBI_FLASH_BASE 0xc0000000
#else
diff --git a/arch/powerpc/include/asm/fsl_serdes.h b/arch/powerpc/include/asm/fsl_serdes.h
index 6cd7379..ccb91fb 100644
--- a/arch/powerpc/include/asm/fsl_serdes.h
+++ b/arch/powerpc/include/asm/fsl_serdes.h
@@ -80,6 +80,14 @@
XFI_FM2_MAC9,
XFI_FM2_MAC10,
INTERLAKEN,
+ SGMII_SW1_DTSEC1, /* SW indicates on L2 switch */
+ SGMII_SW1_DTSEC2,
+ SGMII_SW1_DTSEC3,
+ SGMII_SW1_DTSEC4,
+ SGMII_SW1_DTSEC5,
+ SGMII_SW1_DTSEC6,
+ QSGMII_SW1_A, /* SW indicates on L2 swtich */
+ QSGMII_SW1_B,
};
enum srds {
diff --git a/arch/powerpc/include/asm/global_data.h b/arch/powerpc/include/asm/global_data.h
index d5db854..c02447f 100644
--- a/arch/powerpc/include/asm/global_data.h
+++ b/arch/powerpc/include/asm/global_data.h
@@ -104,12 +104,6 @@
u32 ips_clk;
u32 csb_clk;
#endif /* CONFIG_MPC512X */
-#if defined(CONFIG_MPC8220)
- unsigned long inp_clk;
- unsigned long vco_clk;
- unsigned long pev_clk;
- unsigned long flb_clk;
-#endif
unsigned long reset_status; /* reset status register at boot */
#if defined(CONFIG_MPC83xx)
unsigned long arbiter_event_attributes;
diff --git a/arch/powerpc/include/asm/immap_8220.h b/arch/powerpc/include/asm/immap_8220.h
deleted file mode 100644
index f9595f4..0000000
--- a/arch/powerpc/include/asm/immap_8220.h
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- * MPC8220 Internal Memory Map
- * Copyright (c) 2004 TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * The Internal Memory Map of the 8220.
- *
- */
-#ifndef __IMMAP_MPC8220__
-#define __IMMAP_MPC8220__
-
-/*
- * System configuration registers.
- */
-typedef struct sys_conf {
- u16 mbar; /* 0x00 */
- u16 res1;
-
- u16 res2; /* 0x04 */
- u16 sdramds;
-
- u32 res3[6]; /* 0x08 */
-
- u32 cscfg[6]; /* 0x20 */
-
- u32 res4[2]; /* 0x38 */
-
- u8 res5[3]; /* 0x40 */
- u8 rstctrl;
-
- u8 res6[3]; /* 0x44 */
- u8 rststat;
-
- u32 res7[2]; /* 0x48 */
-
- u32 jtagid; /* 0x50 */
-} sysconf8220_t;
-
-
-/*
- * Memory controller registers.
- */
-typedef struct mem_ctlr {
- ushort mode; /* 0x100 */
- ushort res1;
- u32 ctrl; /* 0x104 */
- u32 cfg1; /* 0x108 */
- u32 cfg2; /* 0x10c */
-} memctl8220_t;
-
-/*
- * XLB Arbitration registers
- */
-typedef struct xlb_arb
-{
- uint res1[16]; /* 0x200 */
- uint config; /* 0x240 */
- uint version; /* 0x244 */
- uint status; /* 0x248 */
- uint intEnable; /* 0x24c */
- uint addrCap; /* 0x250 */
- uint busSigCap; /* 0x254 */
- uint addrTenTimeOut; /* 0x258 */
- uint dataTenTimeOut; /* 0x25c */
- uint busActTimeOut; /* 0x260 */
- uint mastPriEn; /* 0x264 */
- uint mastPriority; /* 0x268 */
- uint baseAddr; /* 0x26c */
-} xlbarb8220_t;
-
-/*
- * Flexbus registers
- */
-typedef struct flexbus
-{
- ushort csar0; /* 0x00 */
- ushort res1;
- uint csmr0; /* 0x04 */
- uint cscr0; /* 0x08 */
-
- ushort csar1; /* 0x0c */
- ushort res2;
- uint csmr1; /* 0x10 */
- uint cscr1; /* 0x14 */
-
- ushort csar2; /* 0x18 */
- ushort res3;
- uint csmr2; /* 0x1c */
- uint cscr2; /* 0x20 */
-
- ushort csar3; /* 0x24 */
- ushort res4;
- uint csmr3; /* 0x28 */
- uint cscr3; /* 0x2c */
-
- ushort csar4; /* 0x30 */
- ushort res5;
- uint csmr4; /* 0x34 */
- uint cscr4; /* 0x38 */
-
- ushort csar5; /* 0x3c */
- ushort res6;
- uint csmr5; /* 0x40 */
- uint cscr5; /* 0x44 */
-} flexbus8220_t;
-
-/*
- * GPIO registers
- */
-typedef struct gpio
-{
- u32 out; /* 0x00 */
- u32 obs; /* 0x04 */
- u32 obc; /* 0x08 */
- u32 obt; /* 0x0c */
- u32 en; /* 0x10 */
- u32 ebs; /* 0x14 */
- u32 ebc; /* 0x18 */
- u32 ebt; /* 0x1c */
- u32 mc; /* 0x20 */
- u32 st; /* 0x24 */
- u32 intr; /* 0x28 */
-} gpio8220_t;
-
-/*
- * General Purpose Timer registers
- */
-typedef struct gptimer
-{
- u8 OCPW;
- u8 OctIct;
- u8 Control;
- u8 Mode;
-
- u16 Prescl; /* Prescale */
- u16 Count; /* Count */
-
- u16 PwmWid; /* PWM Width */
- u8 PwmOp; /* Output Polarity */
- u8 PwmLd; /* Immediate Update */
-
- u16 Capture; /* Capture internal counter */
- u8 OvfPin; /* Ovf and Pin */
- u8 Int; /* Interrupts */
-} gptmr8220_t;
-
-/*
- * PSC registers
- */
-typedef struct psc
-{
- u32 mr1_2; /* 0x00 Mode reg 1 & 2 */
- u32 sr_csr; /* 0x04 Status/Clock Select reg */
- u32 cr; /* 0x08 Command reg */
- u8 xmitbuf[4]; /* 0x0c Receive/Transmit Buffer */
- u32 ipcr_acr; /* 0x10 Input Port Change/Auxiliary Control reg */
- u32 isr_imr; /* 0x14 Interrupt Status/Mask reg */
- u32 ctur; /* 0x18 Counter Timer Upper reg */
- u32 ctlr; /* 0x1c Counter Timer Lower reg */
- u32 rsvd1[4]; /* 0x20 ... 0x2c */
- u32 ivr; /* 0x30 Interrupt Vector reg */
- u32 ipr; /* 0x34 Input Port reg */
- u32 opsetr; /* 0x38 Output Port Set reg */
- u32 opresetr; /* 0x3c Output Port Reset reg */
- u32 sicr; /* 0x40 PSC/IrDA control reg */
- u32 ircr1; /* 0x44 IrDA control reg 1*/
- u32 ircr2; /* 0x48 IrDA control reg 2*/
- u32 irsdr; /* 0x4c IrDA SIR Divide reg */
- u32 irmdr; /* 0x50 IrDA MIR Divide reg */
- u32 irfdr; /* 0x54 PSC IrDA FIR Divide reg */
- u32 rfnum; /* 0x58 RX-FIFO counter */
- u32 txnum; /* 0x5c TX-FIFO counter */
- u32 rfdata; /* 0x60 RX-FIFO data */
- u32 rfstat; /* 0x64 RX-FIFO status */
- u32 rfcntl; /* 0x68 RX-FIFO control */
- u32 rfalarm; /* 0x6c RX-FIFO alarm */
- u32 rfrptr; /* 0x70 RX-FIFO read pointer */
- u32 rfwptr; /* 0x74 RX-FIFO write pointer */
- u32 rflfrptr; /* 0x78 RX-FIFO last read frame pointer */
- u32 rflfwptr; /* 0x7c RX-FIFO last write frame pointer */
-
- u32 tfdata; /* 0x80 TX-FIFO data */
- u32 tfstat; /* 0x84 TX-FIFO status */
- u32 tfcntl; /* 0x88 TX-FIFO control */
- u32 tfalarm; /* 0x8c TX-FIFO alarm */
- u32 tfrptr; /* 0x90 TX-FIFO read pointer */
- u32 tfwptr; /* 0x94 TX-FIFO write pointer */
- u32 tflfrptr; /* 0x98 TX-FIFO last read frame pointer */
- u32 tflfwptr; /* 0x9c TX-FIFO last write frame pointer */
-} psc8220_t;
-
-/*
- * Interrupt Controller registers
- */
-typedef struct interrupt_controller {
-} intctl8220_t;
-
-
-/* Fast controllers
-*/
-
-/*
- * I2C registers
- */
-typedef struct i2c
-{
- u8 adr; /* 0x00 */
- u8 res1[3];
- u8 fdr; /* 0x04 */
- u8 res2[3];
- u8 cr; /* 0x08 */
- u8 res3[3];
- u8 sr; /* 0x0C */
- u8 res4[3];
- u8 dr; /* 0x10 */
- u8 res5[3];
- u32 reserved0; /* 0x14 */
- u32 reserved1; /* 0x18 */
- u32 reserved2; /* 0x1c */
- u8 icr; /* 0x20 */
- u8 res6[3];
-} i2c8220_t;
-
-/*
- * Port Configuration Registers
- */
-typedef struct pcfg
-{
- uint pcfg0; /* 0x00 */
- uint pcfg1; /* 0x04 */
- uint pcfg2; /* 0x08 */
- uint pcfg3; /* 0x0c */
-} pcfg8220_t;
-
-/* ...and the whole thing wrapped up....
-*/
-typedef struct immap {
- sysconf8220_t im_sysconf; /* System Configuration */
- memctl8220_t im_memctl; /* Memory Controller */
- xlbarb8220_t im_xlbarb; /* XLB Arbitration */
- psc8220_t im_psc; /* PSC controller */
- flexbus8220_t im_fb; /* FlexBus Controller */
- i2c8220_t im_i2c; /* I2C control/status */
- pcfg8220_t im_pcfg; /* Port configuration */
-} immap_t;
-
-#endif /* __IMMAP_MPC8220__ */
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index baaa9fe..4052037 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -1676,18 +1676,17 @@
/* Global Utilities Block */
#ifdef CONFIG_FSL_CORENET
typedef struct ccsr_gur {
- u32 porsr1; /* POR status */
- u8 res1[28];
+ u32 porsr1; /* POR status 1 */
+ u32 porsr2; /* POR status 2 */
+ u8 res_008[0x20-0x8];
u32 gpporcr1; /* General-purpose POR configuration */
- u8 res2[12];
- u32 gpiocr; /* GPIO control */
- u8 res3[12];
- u32 gpoutdr; /* General-purpose output data */
- u8 res4[12];
- u32 gpindr; /* General-purpose input data */
- u8 res5[12];
- u32 alt_pmuxcr; /* Alt function signal multiplex control */
- u8 res6[12];
+ u32 gpporcr2; /* General-purpose POR configuration 2 */
+ u32 dcfg_fusesr; /* Fuse status register */
+#define FSL_CORENET_DCFG_FUSESR_VID_SHIFT 25
+#define FSL_CORENET_DCFG_FUSESR_VID_MASK 0x1F
+#define FSL_CORENET_DCFG_FUSESR_ALTVID_SHIFT 20
+#define FSL_CORENET_DCFG_FUSESR_ALTVID_MASK 0x1F
+ u8 res_02c[0x70-0x2c];
u32 devdisr; /* Device disable control */
u32 devdisr2; /* Device disable control 2 */
u32 devdisr3; /* Device disable control 3 */
@@ -1831,7 +1830,7 @@
#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
#define FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT 16
#define FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK 0x3f
-#if defined(CONFIG_PPC_T4240)
+#if defined(CONFIG_PPC_T4240) || defined(CONFIG_PPC_T4160)
#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL 0xfc000000
#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT 26
#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL 0x00fe0000
@@ -1845,6 +1844,11 @@
#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT 25
#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL 0x00ff0000
#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT 16
+#elif defined(CONFIG_PPC_T1040)
+#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL 0xff000000
+#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT 24
+#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL 0x00fe0000
+#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT 17
#endif
#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S1_PLL1 0x00800000
#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S1_PLL2 0x00400000
@@ -1899,7 +1903,7 @@
#define FSL_CORENET_RCWSR11_EC2_FM2_DTSEC5_MII 0x00100000
#define FSL_CORENET_RCWSR11_EC2_FM2_DTSEC5_NONE 0x00180000
#endif
-#if defined(CONFIG_PPC_T4240)
+#if defined(CONFIG_PPC_T4240) || defined(CONFIG_PPC_T4160)
#define FSL_CORENET_RCWSR13_EC1 0x60000000 /* bits 417..418 */
#define FSL_CORENET_RCWSR13_EC1_FM2_DTSEC5_RGMII 0x00000000
#define FSL_CORENET_RCWSR13_EC1_FM2_GPIO 0x40000000
@@ -1992,6 +1996,7 @@
#define TP_CLUSTER_EOC 0x80000000 /* end of clusters */
#define TP_CLUSTER_INIT_MASK 0x0000003f /* initiator mask */
+#define TP_INIT_PER_CLUSTER 4
#define FSL_CORENET_DCSR_SZ_MASK 0x00000003
#define FSL_CORENET_DCSR_SZ_4M 0x0
@@ -2004,22 +2009,13 @@
#define rmuliodnr rio1maintliodnr
typedef struct ccsr_clk {
- u32 clkc0csr; /* 0x000 Core 0 Clock control/status */
- u8 res1[0x1c];
- u32 clkc1csr; /* 0x020 Core 1 Clock control/status */
- u8 res2[0x1c];
- u32 clkc2csr; /* 0x040 Core 2 Clock control/status */
- u8 res3[0x1c];
- u32 clkc3csr; /* 0x060 Core 3 Clock control/status */
- u8 res4[0x1c];
- u32 clkc4csr; /* 0x080 Core 4 Clock control/status */
- u8 res5[0x1c];
- u32 clkc5csr; /* 0x0a0 Core 5 Clock control/status */
- u8 res6[0x1c];
- u32 clkc6csr; /* 0x0c0 Core 6 Clock control/status */
- u8 res7[0x1c];
- u32 clkc7csr; /* 0x0e0 Core 7 Clock control/status */
- u8 res8[0x71c];
+ struct {
+ u32 clkcncsr; /* core cluster n clock control status */
+ u8 res_004[0x0c];
+ u32 clkcgnhwacsr;/* clock generator n hardware accelerator */
+ u8 res_014[0x0c];
+ } clkcsr[8];
+ u8 res_100[0x700]; /* 0x100 */
u32 pllc1gsr; /* 0x800 Cluster PLL 1 General Status */
u8 res10[0x1c];
u32 pllc2gsr; /* 0x820 Cluster PLL 2 General Status */
@@ -2829,12 +2825,53 @@
u8 res4[0x400];
} ccsr_pme_t;
+#ifdef CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE
+struct ccsr_usb_port_ctrl {
+ u32 ctrl;
+ u32 drvvbuscfg;
+ u32 pwrfltcfg;
+ u32 sts;
+ u8 res_14[0xc];
+ u32 bistcfg;
+ u32 biststs;
+ u32 abistcfg;
+ u32 abiststs;
+ u8 res_30[0x10];
+ u32 xcvrprg;
+ u32 anaprg;
+ u32 anadrv;
+ u32 anasts;
+};
+
+typedef struct ccsr_usb_phy {
+ u32 id;
+ struct ccsr_usb_port_ctrl port1;
+ u8 res_50[0xc];
+ u32 tvr;
+ u32 pllprg[4];
+ u8 res_70[0x4];
+ u32 anaccfg;
+ u32 dbg;
+ u8 res_7c[0x4];
+ struct ccsr_usb_port_ctrl port2;
+ u8 res_dc[0x334];
+} ccsr_usb_phy_t;
+
+#define CONFIG_SYS_FSL_USB_CTRL_PHY_EN (1 << 0)
+#define CONFIG_SYS_FSL_USB_DRVVBUS_CR_EN (1 << 1)
+#define CONFIG_SYS_FSL_USB_PWRFLT_CR_EN (1 << 1)
+#define CONFIG_SYS_FSL_USB_PLLPRG2_PHY2_CLK_EN (1 << 0)
+#define CONFIG_SYS_FSL_USB_PLLPRG2_PHY1_CLK_EN (1 << 1)
+#define CONFIG_SYS_FSL_USB_PLLPRG2_MFI (5 << 16)
+#define CONFIG_SYS_FSL_USB_PLLPRG2_PLL_EN (1 << 21)
+#else
typedef struct ccsr_usb_phy {
u8 res0[0x18];
u32 usb_enable_override;
u8 res[0xe4];
} ccsr_usb_phy_t;
#define CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE 1
+#endif
#ifdef CONFIG_SYS_FSL_RAID_ENGINE
struct ccsr_raide {
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 8c91f08..56b22d8 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -507,6 +507,15 @@
#define L2CSR0_L2IO 0x00100000 /* L2 Cache Instruction Only */
#define L2CSR0_L2DO 0x00010000 /* L2 Cache Data Only */
#define L2CSR0_L2REP 0x00003000 /* L2 Line Replacement Algo */
+
+/* e6500 */
+#define L2CSR0_L2REP_SPLRUAGE 0x00000000 /* L2REP Streaming PLRU with Aging */
+#define L2CSR0_L2REP_FIFO 0x00001000 /* L2REP FIFO */
+#define L2CSR0_L2REP_SPLRU 0x00002000 /* L2REP Streaming PLRU */
+#define L2CSR0_L2REP_PLRU 0x00003000 /* L2REP PLRU */
+
+#define L2CSR0_L2REP_MODE L2CSR0_L2REP_SPLRUAGE
+
#define L2CSR0_L2FL 0x00000800 /* L2 Cache Flush */
#define L2CSR0_L2LFC 0x00000400 /* L2 Cache Lock Flash Clear */
#define L2CSR0_L2LOA 0x00000080 /* L2 Cache Lock Overflow Allocate */
@@ -575,6 +584,16 @@
#define SPRN_MSSSR0 0x3f7
#endif
+#define SPRN_HDBCR0 0x3d0
+#define SPRN_HDBCR1 0x3d1
+#define SPRN_HDBCR2 0x3d2
+#define SPRN_HDBCR3 0x3d3
+#define SPRN_HDBCR4 0x3d4
+#define SPRN_HDBCR5 0x3d5
+#define SPRN_HDBCR6 0x3d6
+#define SPRN_HDBCR7 0x277
+#define SPRN_HDBCR8 0x278
+
/* Short-hand versions for a number of the above SPRNs */
#define CTR SPRN_CTR /* Counter Register */
@@ -1099,6 +1118,7 @@
#define SVR_P5040 0x820400
#define SVR_T4240 0x824000
#define SVR_T4120 0x824001
+#define SVR_T4160 0x824100
#define SVR_B4860 0X868000
#define SVR_G4860 0x868001
#define SVR_G4060 0x868003
@@ -1106,6 +1126,12 @@
#define SVR_G4440 0x868101
#define SVR_B4420 0x868102
#define SVR_B4220 0x868103
+#define SVR_T1040 0x852000
+#define SVR_T1041 0x852001
+#define SVR_T1042 0x852002
+#define SVR_T1020 0x852100
+#define SVR_T1021 0x852101
+#define SVR_T1022 0x852102
#define SVR_8610 0x80A000
#define SVR_8641 0x809000
@@ -1174,6 +1200,8 @@
struct cpu_type *identify_cpu(u32 ver);
int fixup_cpu(void);
+int fsl_qoriq_core_to_cluster(unsigned int core);
+
#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
#define CPU_TYPE_ENTRY(n, v, nc) \
{ .name = #n, .soc_ver = SVR_##v, .num_cores = (nc), \
diff --git a/arch/powerpc/include/asm/u-boot.h b/arch/powerpc/include/asm/u-boot.h
index cf972d2..93496a0 100644
--- a/arch/powerpc/include/asm/u-boot.h
+++ b/arch/powerpc/include/asm/u-boot.h
@@ -59,14 +59,6 @@
#if defined(CONFIG_MPC83xx)
unsigned long bi_immrbar;
#endif
-#if defined(CONFIG_MPC8220)
- unsigned long bi_mbar_base; /* base of internal registers */
- unsigned long bi_inpfreq; /* Input Freq, In MHz */
- unsigned long bi_pcifreq; /* PCI Freq, in MHz */
- unsigned long bi_pevfreq; /* PEV Freq, in MHz */
- unsigned long bi_flbfreq; /* Flexbus Freq, in MHz */
- unsigned long bi_vcofreq; /* VCO Freq, in MHz */
-#endif
unsigned long bi_bootflags; /* boot / reboot flag (Unused) */
unsigned long bi_ip_addr; /* IP Address */
unsigned char bi_enetaddr[6]; /* OLD: see README.enetaddr */
diff --git a/arch/powerpc/lib/board.c b/arch/powerpc/lib/board.c
index 41b2294..fc4c1d5 100644
--- a/arch/powerpc/lib/board.c
+++ b/arch/powerpc/lib/board.c
@@ -301,9 +301,6 @@
#if defined(CONFIG_MPC5xxx)
prt_mpc5xxx_clks,
#endif /* CONFIG_MPC5xxx */
-#if defined(CONFIG_MPC8220)
- prt_mpc8220_clks,
-#endif
checkboard,
INIT_FUNC_WATCHDOG_INIT
#if defined(CONFIG_MISC_INIT_F)
@@ -548,27 +545,6 @@
#if defined(CONFIG_MPC83xx)
bd->bi_immrbar = CONFIG_SYS_IMMR;
#endif
-#if defined(CONFIG_MPC8220)
- bd->bi_mbar_base = CONFIG_SYS_MBAR; /* base of internal registers */
- bd->bi_inpfreq = gd->arch.inp_clk;
- bd->bi_pcifreq = gd->pci_clk;
- bd->bi_vcofreq = gd->arch.vco_clk;
- bd->bi_pevfreq = gd->arch.pev_clk;
- bd->bi_flbfreq = gd->arch.flb_clk;
-
- /* store bootparam to sram (backward compatible), here? */
- {
- u32 *sram = (u32 *) CONFIG_SYS_SRAM_BASE;
-
- *sram++ = gd->ram_size;
- *sram++ = gd->bus_clk;
- *sram++ = gd->arch.inp_clk;
- *sram++ = gd->cpu_clk;
- *sram++ = gd->arch.vco_clk;
- *sram++ = gd->arch.flb_clk;
- *sram++ = 0xb8c3ba11; /* boot signature */
- }
-#endif
WATCHDOG_RESET();
bd->bi_intfreq = gd->cpu_clk; /* Internal Freq, in Hz */
diff --git a/arch/powerpc/lib/bootm.c b/arch/powerpc/lib/bootm.c
index 0119a7b..dd6c98c 100644
--- a/arch/powerpc/lib/bootm.c
+++ b/arch/powerpc/lib/bootm.c
@@ -220,101 +220,19 @@
return ret;
}
-/*
- * Verify the device tree.
- *
- * This function is called after all device tree fix-ups have been enacted,
- * so that the final device tree can be verified. The definition of "verified"
- * is up to the specific implementation. However, it generally means that the
- * addresses of some of the devices in the device tree are compared with the
- * actual addresses at which U-Boot has placed them.
- *
- * Returns 1 on success, 0 on failure. If 0 is returned, U-boot will halt the
- * boot process.
- */
-static int __ft_verify_fdt(void *fdt)
-{
- return 1;
-}
-__attribute__((weak, alias("__ft_verify_fdt"))) int ft_verify_fdt(void *fdt);
-
static int boot_body_linux(bootm_headers_t *images)
{
- ulong rd_len;
- struct lmb *lmb = &images->lmb;
- ulong *initrd_start = &images->initrd_start;
- ulong *initrd_end = &images->initrd_end;
-#if defined(CONFIG_OF_LIBFDT)
- ulong of_size = images->ft_len;
- char **of_flat_tree = &images->ft_addr;
-#endif
-
int ret;
-#if defined(CONFIG_OF_LIBFDT)
- boot_fdt_add_mem_rsv_regions(lmb, *of_flat_tree);
-#endif
-
- /* allocate space and init command line */
- ret = boot_cmdline_linux(images);
- if (ret)
- return ret;
-
/* allocate space for kernel copy of board info */
ret = boot_bd_t_linux(images);
if (ret)
return ret;
- rd_len = images->rd_end - images->rd_start;
- ret = boot_ramdisk_high (lmb, images->rd_start, rd_len, initrd_start, initrd_end);
+ ret = image_setup_linux(images);
if (ret)
return ret;
-#if defined(CONFIG_OF_LIBFDT)
- ret = boot_relocate_fdt(lmb, of_flat_tree, &of_size);
- if (ret)
- return ret;
-
- /*
- * Add the chosen node if it doesn't exist, add the env and bd_t
- * if the user wants it (the logic is in the subroutines).
- */
- if (of_size) {
- if (fdt_chosen(*of_flat_tree, 1) < 0) {
- puts ("ERROR: ");
- puts ("/chosen node create failed");
- puts (" - must RESET the board to recover.\n");
- return -1;
- }
-#ifdef CONFIG_OF_BOARD_SETUP
- /* Call the board-specific fixup routine */
- ft_board_setup(*of_flat_tree, gd->bd);
-#endif
-
- /* Delete the old LMB reservation */
- lmb_free(lmb, (phys_addr_t)(u32)*of_flat_tree,
- (phys_size_t)fdt_totalsize(*of_flat_tree));
-
- ret = fdt_resize(*of_flat_tree);
- if (ret < 0)
- return ret;
- of_size = ret;
-
- if (*initrd_start && *initrd_end) {
- of_size += FDT_RAMDISK_OVERHEAD;
- fdt_set_totalsize(*of_flat_tree, of_size);
- }
- /* Create a new LMB reservation */
- lmb_reserve(lmb, (ulong)*of_flat_tree, of_size);
-
- /* fixup the initrd now that we know where it should be */
- if (*initrd_start && *initrd_end)
- fdt_initrd(*of_flat_tree, *initrd_start, *initrd_end, 1);
-
- if (!ft_verify_fdt(*of_flat_tree))
- return -1;
- }
-#endif /* CONFIG_OF_LIBFDT */
return 0;
}
@@ -368,13 +286,6 @@
/* convert all clock information to MHz */
kbd->bi_intfreq /= 1000000L;
kbd->bi_busfreq /= 1000000L;
-#if defined(CONFIG_MPC8220)
- kbd->bi_inpfreq /= 1000000L;
- kbd->bi_pcifreq /= 1000000L;
- kbd->bi_pevfreq /= 1000000L;
- kbd->bi_flbfreq /= 1000000L;
- kbd->bi_vcofreq /= 1000000L;
-#endif
#if defined(CONFIG_CPM2)
kbd->bi_cpmfreq /= 1000000L;
kbd->bi_brgfreq /= 1000000L;
diff --git a/arch/sparc/lib/bootm.c b/arch/sparc/lib/bootm.c
index bcc6358..1a9343c 100644
--- a/arch/sparc/lib/bootm.c
+++ b/arch/sparc/lib/bootm.c
@@ -95,10 +95,8 @@
int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t * images)
{
char *bootargs;
- ulong initrd_start, initrd_end;
ulong rd_len;
void (*kernel) (struct linux_romvec *, void *);
- struct lmb *lmb = &images->lmb;
int ret;
if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
@@ -131,24 +129,23 @@
* extracted and is writeable.
*/
+ ret = image_setup_linux(images);
+ if (ret) {
+ puts("### Failed to relocate RAM disk\n");
+ goto error;
+ }
+
/* Calc length of RAM disk, if zero no ramdisk available */
rd_len = images->rd_end - images->rd_start;
if (rd_len) {
- ret = boot_ramdisk_high(lmb, images->rd_start, rd_len,
- &initrd_start, &initrd_end);
- if (ret) {
- puts("### Failed to relocate RAM disk\n");
- goto error;
- }
-
/* Update SPARC kernel header so that Linux knows
* what is going on and where to find RAM disk.
*
* Set INITRD Image address relative to RAM Start
*/
linux_hdr->hdr_input.ver_0203.sparc_ramdisk_image =
- initrd_start - CONFIG_SYS_RAM_BASE;
+ images->initrd_start - CONFIG_SYS_RAM_BASE;
linux_hdr->hdr_input.ver_0203.sparc_ramdisk_size = rd_len;
/* Clear READ ONLY flag if set to non-zero */
linux_hdr->hdr_input.ver_0203.root_flags = 1;
diff --git a/arch/x86/cpu/Makefile b/arch/x86/cpu/Makefile
index 7b520f8..cddf0dd 100644
--- a/arch/x86/cpu/Makefile
+++ b/arch/x86/cpu/Makefile
@@ -30,7 +30,7 @@
START-y = start.o
START-$(CONFIG_X86_RESET_VECTOR) += resetvec.o start16.o
-COBJS = interrupts.o cpu.o timer.o
+COBJS = interrupts.o cpu.o
SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/arch/x86/cpu/coreboot/coreboot.c b/arch/x86/cpu/coreboot/coreboot.c
index f8e28f0..14cb699 100644
--- a/arch/x86/cpu/coreboot/coreboot.c
+++ b/arch/x86/cpu/coreboot/coreboot.c
@@ -26,6 +26,7 @@
#include <asm/u-boot-x86.h>
#include <flash.h>
#include <netdev.h>
+#include <ns16550.h>
#include <asm/msr.h>
#include <asm/cache.h>
#include <asm/io.h>
@@ -90,6 +91,9 @@
int last_stage_init(void)
{
+ if (gd->flags & GD_FLG_COLD_BOOT)
+ timestamp_add_to_bootstage();
+
return 0;
}
@@ -135,3 +139,12 @@
return 0;
}
+
+void panic_puts(const char *str)
+{
+ NS16550_t port = (NS16550_t)0x3f8;
+
+ NS16550_init(port, 1);
+ while (*str)
+ NS16550_putc(port, *str++);
+}
diff --git a/arch/x86/cpu/coreboot/timestamp.c b/arch/x86/cpu/coreboot/timestamp.c
index 2ca7a57..bd3558a 100644
--- a/arch/x86/cpu/coreboot/timestamp.c
+++ b/arch/x86/cpu/coreboot/timestamp.c
@@ -39,7 +39,9 @@
void timestamp_init(void)
{
ts_table = lib_sysinfo.tstamp_table;
- timer_set_tsc_base(ts_table->base_time);
+#ifdef CONFIG_SYS_X86_TSC_TIMER
+ timer_set_base(ts_table->base_time);
+#endif
timestamp_add_now(TS_U_BOOT_INITTED);
}
@@ -59,3 +61,41 @@
{
timestamp_add(id, rdtsc());
}
+
+int timestamp_add_to_bootstage(void)
+{
+ uint i;
+
+ if (!ts_table)
+ return -1;
+
+ for (i = 0; i < ts_table->num_entries; i++) {
+ struct timestamp_entry *tse = &ts_table->entries[i];
+ const char *name = NULL;
+
+ switch (tse->entry_id) {
+ case TS_START_ROMSTAGE:
+ name = "start-romstage";
+ break;
+ case TS_BEFORE_INITRAM:
+ name = "before-initram";
+ break;
+ case TS_DEVICE_INITIALIZE:
+ name = "device-initialize";
+ break;
+ case TS_DEVICE_DONE:
+ name = "device-done";
+ break;
+ case TS_SELFBOOT_JUMP:
+ name = "selfboot-jump";
+ break;
+ }
+ if (name) {
+ bootstage_add_record(0, name, BOOTSTAGEF_ALLOC,
+ tse->entry_stamp /
+ get_tbclk_mhz());
+ }
+ }
+
+ return 0;
+}
diff --git a/arch/x86/cpu/cpu.c b/arch/x86/cpu/cpu.c
index 1a2f85c..7a914a5 100644
--- a/arch/x86/cpu/cpu.c
+++ b/arch/x86/cpu/cpu.c
@@ -120,6 +120,11 @@
int __weak x86_cleanup_before_linux(void)
{
+#ifdef CONFIG_BOOTSTAGE_STASH
+ bootstage_stash((void *)CONFIG_BOOTSTAGE_STASH,
+ CONFIG_BOOTSTAGE_STASH_SIZE);
+#endif
+
return 0;
}
diff --git a/arch/x86/cpu/interrupts.c b/arch/x86/cpu/interrupts.c
index 6dc74e3..e733bcb 100644
--- a/arch/x86/cpu/interrupts.c
+++ b/arch/x86/cpu/interrupts.c
@@ -37,6 +37,8 @@
#include <asm/msr.h>
#include <asm/u-boot-x86.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#define DECLARE_INTERRUPT(x) \
".globl irq_"#x"\n" \
".hidden irq_"#x"\n" \
diff --git a/arch/x86/cpu/timer.c b/arch/x86/cpu/timer.c
deleted file mode 100644
index 149109d..0000000
--- a/arch/x86/cpu/timer.c
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Copyright (c) 2011 The Chromium OS Authors. All rights reserved.
- * Use of this source code is governed by a BSD-style license that can be
- * found in the LICENSE file.
- *
- * Alternatively, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") version 2 as published by the Free
- * Software Foundation.
- */
-
-#include <common.h>
-
-unsigned long timer_get_us(void)
-{
- printf("timer_get_us used but not implemented.\n");
- return 0;
-}
diff --git a/arch/x86/cpu/u-boot.lds b/arch/x86/cpu/u-boot.lds
index 2d6911a..b4ecd4b 100644
--- a/arch/x86/cpu/u-boot.lds
+++ b/arch/x86/cpu/u-boot.lds
@@ -79,18 +79,6 @@
/DISCARD/ : { *(.interp*) }
/DISCARD/ : { *(.gnu*) }
- /* 16bit realmode trampoline code */
- .realmode REALMODE_BASE : AT ( LOADADDR(.rel.dyn) + SIZEOF(.rel.dyn) ) { KEEP(*(.realmode)) }
-
- __realmode_start = LOADADDR(.realmode);
- __realmode_size = SIZEOF(.realmode);
-
- /* 16bit BIOS emulation code (just enough to boot Linux) */
- .bios 0 : AT ( LOADADDR(.realmode) + SIZEOF(.realmode) ) { KEEP(*(.bios)) }
-
- __bios_start = LOADADDR(.bios);
- __bios_size = SIZEOF(.bios);
-
#ifdef CONFIG_X86_RESET_VECTOR
/*
diff --git a/arch/x86/include/asm/arch-coreboot/timestamp.h b/arch/x86/include/asm/arch-coreboot/timestamp.h
index d104912..fcfc1d5 100644
--- a/arch/x86/include/asm/arch-coreboot/timestamp.h
+++ b/arch/x86/include/asm/arch-coreboot/timestamp.h
@@ -49,4 +49,11 @@
void timestamp_add(enum timestamp_id id, uint64_t ts_time);
void timestamp_add_now(enum timestamp_id id);
+/**
+ * timestamp_add_to_bootstage - Add important coreboot timestamps to bootstage
+ *
+ * @return 0 if ok, -1 if no timestamps were found
+ */
+int timestamp_add_to_bootstage(void);
+
#endif
diff --git a/arch/x86/include/asm/init_helpers.h b/arch/x86/include/asm/init_helpers.h
index d018b29..0a6a675 100644
--- a/arch/x86/include/asm/init_helpers.h
+++ b/arch/x86/include/asm/init_helpers.h
@@ -24,19 +24,10 @@
#ifndef _INIT_HELPERS_H_
#define _INIT_HELPERS_H_
-int display_banner(void);
-int display_dram_config(void);
-int init_baudrate_f(void);
int calculate_relocation_address(void);
int init_cache_f_r(void);
-
-int set_reloc_flag_r(void);
-int mem_malloc_init_r(void);
int init_bd_struct_r(void);
-int flash_init_r(void);
-int status_led_set_r(void);
-int set_load_addr_r(void);
int init_func_spi(void);
int find_fdt(void);
int prepare_fdt(void);
diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index 6d68ab6..9cc2034 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -30,8 +30,4 @@
const struct pci_device_id _table[]
void pci_setup_type1(struct pci_controller *hose);
-int pci_enable_legacy_video_ports(struct pci_controller* hose);
-int pci_shadow_rom(pci_dev_t dev, unsigned char *dest);
-void pci_remove_rom_window(struct pci_controller* hose, u32 addr);
-u32 pci_get_rom_window(struct pci_controller* hose, int size);
#endif
diff --git a/arch/x86/include/asm/u-boot-x86.h b/arch/x86/include/asm/u-boot-x86.h
index ae0c388..22e0934 100644
--- a/arch/x86/include/asm/u-boot-x86.h
+++ b/arch/x86/include/asm/u-boot-x86.h
@@ -33,11 +33,15 @@
void setup_gdt(gd_t *id, u64 *gdt_addr);
int init_cache(void);
int cleanup_before_linux(void);
+void panic_puts(const char *str);
/* cpu/.../timer.c */
void timer_isr(void *);
typedef void (timer_fnc_t) (void);
int register_timer_isr (timer_fnc_t *isr_func);
+unsigned long get_tbclk_mhz(void);
+void timer_set_base(uint64_t base);
+int pcat_timer_init(void);
/* Architecture specific - can be in arch/x86/cpu/, arch/x86/lib/, or $(BOARD)/ */
int dram_init_f(void);
diff --git a/arch/x86/include/asm/u-boot.h b/arch/x86/include/asm/u-boot.h
index df759fa..006232b 100644
--- a/arch/x86/include/asm/u-boot.h
+++ b/arch/x86/include/asm/u-boot.h
@@ -36,40 +36,8 @@
#ifndef _U_BOOT_H_
#define _U_BOOT_H_ 1
-#include <config.h>
-#include <compiler.h>
-
-#ifdef CONFIG_SYS_GENERIC_BOARD
/* Use the generic board which requires a unified bd_info */
#include <asm-generic/u-boot.h>
-#else
-
-#ifndef __ASSEMBLY__
-
-typedef struct bd_info {
- unsigned long bi_memstart; /* start of DRAM memory */
- phys_size_t bi_memsize; /* size of DRAM memory in bytes */
- unsigned long bi_flashstart; /* start of FLASH memory */
- unsigned long bi_flashsize; /* size of FLASH memory */
- unsigned long bi_flashoffset; /* reserved area for startup monitor */
- unsigned long bi_sramstart; /* start of SRAM memory */
- unsigned long bi_sramsize; /* size of SRAM memory */
- unsigned long bi_bootflags; /* boot / reboot flag (for LynxOS) */
- unsigned short bi_ethspeed; /* Ethernet speed in Mbps */
- unsigned long bi_intfreq; /* Internal Freq, in MHz */
- unsigned long bi_busfreq; /* Bus Freq, in MHz */
- unsigned int bi_baudrate; /* Console Baudrate */
- unsigned long bi_boot_params; /* where this board expects params */
- struct /* RAM configuration */
- {
- ulong start;
- ulong size;
- }bi_dram[CONFIG_NR_DRAM_BANKS];
-} bd_t;
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* !CONFIG_SYS_GENERIC_BOARD */
/* For image.h:image_check_target_arch() */
#define IH_ARCH_DEFAULT IH_ARCH_I386
diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index ee89354..f66ad30 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -25,24 +25,18 @@
LIB = $(obj)lib$(ARCH).o
-ifeq ($(CONFIG_SYS_GENERIC_BOARD),)
-COBJS-y += board.o
-endif
-
COBJS-y += bootm.o
COBJS-y += cmd_boot.o
COBJS-y += gcc.o
COBJS-y += init_helpers.o
-COBJS-y += init_wrappers.o
COBJS-y += interrupts.o
COBJS-$(CONFIG_SYS_PCAT_INTERRUPTS) += pcat_interrupts.o
-COBJS-$(CONFIG_SYS_GENERIC_TIMER) += pcat_timer.o
-COBJS-$(CONFIG_PCI) += pci.o
+COBJS-$(CONFIG_SYS_PCAT_TIMER) += pcat_timer.o
COBJS-$(CONFIG_PCI) += pci_type1.o
COBJS-y += relocate.o
COBJS-y += physmem.o
COBJS-y += string.o
-COBJS-$(CONFIG_SYS_X86_ISR_TIMER) += timer.o
+COBJS-$(CONFIG_SYS_X86_TSC_TIMER) += tsc_timer.o
COBJS-$(CONFIG_VIDEO_VGA) += video.o
COBJS-$(CONFIG_CMD_ZBOOT) += zimage.o
diff --git a/arch/x86/lib/bios.h b/arch/x86/lib/bios.h
deleted file mode 100644
index 96509b0..0000000
--- a/arch/x86/lib/bios.h
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _BIOS_H_
-#define _BIOS_H_
-
-#define OFFS_ES 0 /* 16bit */
-#define OFFS_GS 2 /* 16bit */
-#define OFFS_DS 4 /* 16bit */
-#define OFFS_EDI 6 /* 32bit */
-#define OFFS_DI 6 /* low 16 bits of EDI */
-#define OFFS_ESI 10 /* 32bit */
-#define OFFS_SI 10 /* low 16 bits of ESI */
-#define OFFS_EBP 14 /* 32bit */
-#define OFFS_BP 14 /* low 16 bits of EBP */
-#define OFFS_ESP 18 /* 32bit */
-#define OFFS_SP 18 /* low 16 bits of ESP */
-#define OFFS_EBX 22 /* 32bit */
-#define OFFS_BX 22 /* low 16 bits of EBX */
-#define OFFS_BL 22 /* low 8 bits of BX */
-#define OFFS_BH 23 /* high 8 bits of BX */
-#define OFFS_EDX 26 /* 32bit */
-#define OFFS_DX 26 /* low 16 bits of EBX */
-#define OFFS_DL 26 /* low 8 bits of BX */
-#define OFFS_DH 27 /* high 8 bits of BX */
-#define OFFS_ECX 30 /* 32bit */
-#define OFFS_CX 30 /* low 16 bits of EBX */
-#define OFFS_CL 30 /* low 8 bits of BX */
-#define OFFS_CH 31 /* high 8 bits of BX */
-#define OFFS_EAX 34 /* 32bit */
-#define OFFS_AX 34 /* low 16 bits of EBX */
-#define OFFS_AL 34 /* low 8 bits of BX */
-#define OFFS_AH 35 /* high 8 bits of BX */
-#define OFFS_VECTOR 38 /* 16bit */
-#define OFFS_IP 40 /* 16bit */
-#define OFFS_CS 42 /* 16bit */
-#define OFFS_FLAGS 44 /* 16bit */
-
-/* stack at 0x40:0x800 -> 0x800 */
-#define SEGMENT 0x40
-#define STACK 0x800
-
-/*
- * save general registers
- * save some segments
- * save callers stack segment
- * setup BIOS segments
- * setup BIOS stackpointer
- */
-#define MAKE_BIOS_STACK \
- pushal; \
- pushw %ds; \
- pushw %gs; \
- pushw %es; \
- pushw %ss; \
- popw %gs; \
- movw $SEGMENT, %ax; \
- movw %ax, %ds; \
- movw %ax, %es; \
- movw %ax, %ss; \
- movw %sp, %bp; \
- movw $STACK, %sp
-
-/*
- * restore callers stack segment
- * restore some segments
- * restore general registers
- */
-#define RESTORE_CALLERS_STACK \
- pushw %gs; \
- popw %ss; \
- movw %bp, %sp; \
- popw %es; \
- popw %gs; \
- popw %ds; \
- popal
-
-#ifndef __ASSEMBLY__
-#define BIOS_DATA ((char *)0x400)
-#define BIOS_DATA_SIZE 256
-#define BIOS_BASE ((char *)0xf0000)
-#define BIOS_CS 0xf000
-
-extern ulong __bios_start;
-extern ulong __bios_size;
-
-/* these are defined in a 16bit segment and needs
- * to be accessed with the RELOC_16_xxxx() macros below
- */
-extern u16 ram_in_64kb_chunks;
-extern u16 bios_equipment;
-extern u8 pci_last_bus;
-
-extern void *rm_int00;
-extern void *rm_int01;
-extern void *rm_int02;
-extern void *rm_int03;
-extern void *rm_int04;
-extern void *rm_int05;
-extern void *rm_int06;
-extern void *rm_int07;
-extern void *rm_int08;
-extern void *rm_int09;
-extern void *rm_int0a;
-extern void *rm_int0b;
-extern void *rm_int0c;
-extern void *rm_int0d;
-extern void *rm_int0e;
-extern void *rm_int0f;
-extern void *rm_int10;
-extern void *rm_int11;
-extern void *rm_int12;
-extern void *rm_int13;
-extern void *rm_int14;
-extern void *rm_int15;
-extern void *rm_int16;
-extern void *rm_int17;
-extern void *rm_int18;
-extern void *rm_int19;
-extern void *rm_int1a;
-extern void *rm_int1b;
-extern void *rm_int1c;
-extern void *rm_int1d;
-extern void *rm_int1e;
-extern void *rm_int1f;
-extern void *rm_def_int;
-
-#define RELOC_16_LONG(seg, off) (*(u32 *)(seg << 4 | (u32)&off))
-#define RELOC_16_WORD(seg, off) (*(u16 *)(seg << 4 | (u32)&off))
-#define RELOC_16_BYTE(seg, off) (*(u8 *)(seg << 4 | (u32)&off))
-
-#ifdef PCI_BIOS_DEBUG
-extern u32 num_pci_bios_present;
-extern u32 num_pci_bios_find_device;
-extern u32 num_pci_bios_find_class;
-extern u32 num_pci_bios_generate_special_cycle;
-extern u32 num_pci_bios_read_cfg_byte;
-extern u32 num_pci_bios_read_cfg_word;
-extern u32 num_pci_bios_read_cfg_dword;
-extern u32 num_pci_bios_write_cfg_byte;
-extern u32 num_pci_bios_write_cfg_word;
-extern u32 num_pci_bios_write_cfg_dword;
-extern u32 num_pci_bios_get_irq_routing;
-extern u32 num_pci_bios_set_irq;
-extern u32 num_pci_bios_unknown_function;
-#endif
-
-#endif
-
-#endif
diff --git a/arch/x86/lib/board.c b/arch/x86/lib/board.c
deleted file mode 100644
index 228c2c8..0000000
--- a/arch/x86/lib/board.c
+++ /dev/null
@@ -1,266 +0,0 @@
-/*
- * (C) Copyright 2008-2011
- * Graeme Russ, <graeme.russ@gmail.com>
- *
- * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
- *
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <fdtdec.h>
-#include <watchdog.h>
-#include <stdio_dev.h>
-#include <asm/u-boot-x86.h>
-#include <asm/relocate.h>
-#include <asm/processor.h>
-#include <asm/sections.h>
-
-#include <asm/init_helpers.h>
-#include <asm/init_wrappers.h>
-
-/*
- * Breath some life into the board...
- *
- * Getting the board up and running is a three-stage process:
- * 1) Execute from Flash, SDRAM Uninitialised
- * At this point, there is a limited amount of non-SDRAM memory
- * (typically the CPU cache, but can also be SRAM or even a buffer of
- * of some peripheral). This limited memory is used to hold:
- * - The initial copy of the Global Data Structure
- * - A temporary stack
- * - A temporary x86 Global Descriptor Table
- * - The pre-console buffer (if enabled)
- *
- * The following is performed during this phase of execution:
- * - Core low-level CPU initialisation
- * - Console initialisation
- * - SDRAM initialisation
- *
- * 2) Execute from Flash, SDRAM Initialised
- * At this point we copy Global Data from the initial non-SDRAM
- * memory and set up the permanent stack in SDRAM. The CPU cache is no
- * longer being used as temporary memory, so we can now fully enable
- * it.
- *
- * The following is performed during this phase of execution:
- * - Create final stack in SDRAM
- * - Copy Global Data from temporary memory to SDRAM
- * - Enabling of CPU cache(s),
- * - Copying of U-Boot code and data from Flash to RAM
- * - Clearing of the BSS
- * - ELF relocation adjustments
- *
- * 3) Execute from SDRAM
- * The following is performed during this phase of execution:
- * - All remaining initialisation
- */
-
-/*
- * The requirements for any new initalization function is simple: it is
- * a function with no parameters which returns an integer return code,
- * where 0 means "continue" and != 0 means "fatal error, hang the system"
- */
-typedef int (init_fnc_t) (void);
-
-/*
- * init_sequence_f is the list of init functions which are run when U-Boot
- * is executing from Flash with a limited 'C' environment. The following
- * limitations must be considered when implementing an '_f' function:
- * - 'static' variables are read-only
- * - Global Data (gd->xxx) is read/write
- * - Stack space is limited
- *
- * The '_f' sequence must, as a minimum, initialise SDRAM. It _should_
- * also initialise the console (to provide early debug output)
- */
-init_fnc_t *init_sequence_f[] = {
- cpu_init_f,
- board_early_init_f,
-#ifdef CONFIG_OF_CONTROL
- find_fdt,
- fdtdec_check_fdt,
-#endif
- env_init,
- init_baudrate_f,
- serial_init,
- console_init_f,
-#ifdef CONFIG_OF_CONTROL
- prepare_fdt,
-#endif
- dram_init_f,
- calculate_relocation_address,
-
- NULL,
-};
-
-/*
- * init_sequence_f_r is the list of init functions which are run when
- * U-Boot is executing from Flash with a semi-limited 'C' environment.
- * The following limitations must be considered when implementing an
- * '_f_r' function:
- * - 'static' variables are read-only
- * - Global Data (gd->xxx) is read/write
- *
- * The '_f_r' sequence must, as a minimum, copy U-Boot to RAM (if
- * supported). It _should_, if possible, copy global data to RAM and
- * initialise the CPU caches (to speed up the relocation process)
- */
-init_fnc_t *init_sequence_f_r[] = {
- init_cache_f_r,
- copy_uboot_to_ram,
- copy_fdt_to_ram,
- clear_bss,
- do_elf_reloc_fixups,
-
- NULL,
-};
-
-/*
- * init_sequence_r is the list of init functions which are run when U-Boot
- * is executing from RAM with a full 'C' environment. There are no longer
- * any limitations which must be considered when implementing an '_r'
- * function, (i.e.'static' variables are read/write)
- *
- * If not already done, the '_r' sequence must copy global data to RAM and
- * (should) initialise the CPU caches.
- */
-init_fnc_t *init_sequence_r[] = {
- set_reloc_flag_r,
- init_bd_struct_r,
- mem_malloc_init_r,
- cpu_init_r,
- board_early_init_r,
- dram_init,
- interrupt_init,
- timer_init,
- display_banner,
- display_dram_config,
- serial_initialize_r,
-#ifndef CONFIG_SYS_NO_FLASH
- flash_init_r,
-#endif
-#ifdef CONFIG_PCI
- pci_init_r,
-#endif
-#ifdef CONFIG_SPI
- init_func_spi,
-#endif
- env_relocate_r,
- stdio_init,
- jumptable_init_r,
- console_init_r,
-#ifdef CONFIG_MISC_INIT_R
- misc_init_r,
-#endif
-#if defined(CONFIG_CMD_KGDB)
- kgdb_init_r,
-#endif
- enable_interrupts_r,
-#ifdef CONFIG_STATUS_LED
- status_led_set_r,
-#endif
- set_load_addr_r,
-#if defined(CONFIG_CMD_IDE)
- ide_init_r,
-#endif
-#if defined(CONFIG_CMD_SCSI)
- scsi_init_r,
-#endif
-#if defined(CONFIG_CMD_DOC)
- doc_init_r,
-#endif
-#ifdef CONFIG_BITBANGMII
- bb_miiphy_init_r,
-#endif
-#if defined(CONFIG_CMD_NET)
- eth_initialize_r,
-#ifdef CONFIG_RESET_PHY_R
- reset_phy_r,
-#endif
-#endif
-#ifdef CONFIG_LAST_STAGE_INIT
- last_stage_init,
-#endif
- NULL,
-};
-
-static void do_init_loop(init_fnc_t **init_fnc_ptr)
-{
- for (; *init_fnc_ptr; ++init_fnc_ptr) {
- WATCHDOG_RESET();
- if ((*init_fnc_ptr)() != 0)
- hang();
- }
-}
-
-void board_init_f(ulong boot_flags)
-{
- gd->fdt_blob = gd->new_fdt = NULL;
- gd->flags = boot_flags;
-
- do_init_loop(init_sequence_f);
-
- /*
- * SDRAM and console are now initialised. The final stack can now
- * be setup in SDRAM. Code execution will continue in Flash, but
- * with the stack in SDRAM and Global Data in temporary memory
- * (CPU cache)
- */
- board_init_f_r_trampoline(gd->start_addr_sp);
-
- /* NOTREACHED - board_init_f_r_trampoline() does not return */
- while (1)
- ;
-}
-
-void board_init_f_r(void)
-{
- do_init_loop(init_sequence_f_r);
-
- /*
- * U-Boot has been copied into SDRAM, the BSS has been cleared etc.
- * Transfer execution from Flash to RAM by calculating the address
- * of the in-RAM copy of board_init_r() and calling it
- */
- (board_init_r + gd->reloc_off)(gd, gd->relocaddr);
-
- /* NOTREACHED - board_init_r() does not return */
- while (1)
- ;
-}
-
-void board_init_r(gd_t *id, ulong dest_addr)
-{
- do_init_loop(init_sequence_r);
-
- /* main_loop() can return to retry autoboot, if so just run it again. */
- for (;;)
- main_loop();
-
- /* NOTREACHED - no way out of command loop except booting */
-}
diff --git a/arch/x86/lib/bootm.c b/arch/x86/lib/bootm.c
index 83caf6b..2520228 100644
--- a/arch/x86/lib/bootm.c
+++ b/arch/x86/lib/bootm.c
@@ -93,14 +93,6 @@
goto error;
}
-#ifdef DEBUG
- printf("## Transferring control to Linux (at address %08x) ...\n",
- (u32)base_ptr);
-#endif
-
- /* we assume that the kernel is in place */
- printf("\nStarting kernel ...\n\n");
-
boot_zimage(base_ptr, load_address);
/* does not return */
diff --git a/arch/x86/lib/cmd_boot.c b/arch/x86/lib/cmd_boot.c
index a81a9a3..315be5a 100644
--- a/arch/x86/lib/cmd_boot.c
+++ b/arch/x86/lib/cmd_boot.c
@@ -36,6 +36,8 @@
#include <malloc.h>
#include <asm/u-boot-x86.h>
+DECLARE_GLOBAL_DATA_PTR;
+
unsigned long do_go_exec(ulong (*entry)(int, char * const []),
int argc, char * const argv[])
{
diff --git a/arch/x86/lib/init_helpers.c b/arch/x86/lib/init_helpers.c
index af9dbc1..a57a0eb 100644
--- a/arch/x86/lib/init_helpers.c
+++ b/arch/x86/lib/init_helpers.c
@@ -21,60 +21,12 @@
* MA 02111-1307 USA
*/
#include <common.h>
-#include <command.h>
#include <fdtdec.h>
-#include <stdio_dev.h>
-#include <version.h>
-#include <malloc.h>
-#include <net.h>
-#include <ide.h>
-#include <serial.h>
#include <spi.h>
-#include <status_led.h>
-#include <asm/processor.h>
#include <asm/sections.h>
-#include <asm/u-boot-x86.h>
-#include <linux/compiler.h>
-
-#include <asm/init_helpers.h>
DECLARE_GLOBAL_DATA_PTR;
-/************************************************************************
- * Init Utilities *
- ************************************************************************
- * Some of this code should be moved into the core functions,
- * or dropped completely,
- * but let's get it working (again) first...
- */
-
-int display_banner(void)
-{
- printf("\n\n%s\n\n", version_string);
-
- return 0;
-}
-
-int display_dram_config(void)
-{
- int i;
-
- puts("DRAM Configuration:\n");
-
- for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
- printf("Bank #%d: %08lx ", i, gd->bd->bi_dram[i].start);
- print_size(gd->bd->bi_dram[i].size, "\n");
- }
-
- return 0;
-}
-
-int init_baudrate_f(void)
-{
- gd->baudrate = getenv_ulong("baudrate", 10, CONFIG_BAUDRATE);
- return 0;
-}
-
/* Get the top of usable RAM */
__weak ulong board_get_usable_ram_top(ulong total_size)
{
@@ -134,21 +86,6 @@
return init_cache();
}
-int set_reloc_flag_r(void)
-{
- gd->flags = GD_FLG_RELOC;
-
- return 0;
-}
-
-int mem_malloc_init_r(void)
-{
- mem_malloc_init(((gd->relocaddr - CONFIG_SYS_MALLOC_LEN)+3)&~3,
- CONFIG_SYS_MALLOC_LEN);
-
- return 0;
-}
-
bd_t bd_data;
int init_bd_struct_r(void)
@@ -159,39 +96,6 @@
return 0;
}
-#ifndef CONFIG_SYS_NO_FLASH
-int flash_init_r(void)
-{
- ulong size;
-
- puts("Flash: ");
-
- /* configure available FLASH banks */
- size = flash_init();
-
- print_size(size, "\n");
-
- return 0;
-}
-#endif
-
-#ifdef CONFIG_STATUS_LED
-int status_led_set_r(void)
-{
- status_led_set(STATUS_LED_BOOT, STATUS_LED_BLINKING);
-
- return 0;
-}
-#endif
-
-int set_load_addr_r(void)
-{
- /* Initialize from environment */
- load_addr = getenv_ulong("loadaddr", 16, load_addr);
-
- return 0;
-}
-
int init_func_spi(void)
{
puts("SPI: ");
@@ -200,7 +104,6 @@
return 0;
}
-#ifdef CONFIG_OF_CONTROL
int find_fdt(void)
{
#ifdef CONFIG_OF_EMBED
@@ -227,4 +130,3 @@
return 0;
}
-#endif
diff --git a/arch/x86/lib/init_wrappers.c b/arch/x86/lib/init_wrappers.c
deleted file mode 100644
index 19af875..0000000
--- a/arch/x86/lib/init_wrappers.c
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * (C) Copyright 2011
- * Graeme Russ, <graeme.russ@gmail.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <common.h>
-#include <environment.h>
-#include <fdtdec.h>
-#include <serial.h>
-#include <kgdb.h>
-#include <scsi.h>
-#include <post.h>
-#include <miiphy.h>
-
-#include <asm/init_wrappers.h>
-
-int serial_initialize_r(void)
-{
- serial_initialize();
-
- return 0;
-}
-
-/*
- * Tell if it's OK to load the environment early in boot.
- *
- * If CONFIG_OF_CONFIG is defined, we'll check with the FDT to see
- * if this is OK (defaulting to saying it's not OK).
- *
- * NOTE: Loading the environment early can be a bad idea if security is
- * important, since no verification is done on the environment.
- *
- * @return 0 if environment should not be loaded, !=0 if it is ok to load
- */
-static int should_load_env(void)
-{
-#ifdef CONFIG_OF_CONTROL
- return fdtdec_get_config_int(gd->fdt_blob, "load-environment", 0);
-#elif defined CONFIG_DELAY_ENVIRONMENT
- return 0;
-#else
- return 1;
-#endif
-}
-
-int env_relocate_r(void)
-{
- /* initialize environment */
- if (should_load_env())
- env_relocate();
- else
- set_default_env(NULL);
-
- return 0;
-}
-
-
-int pci_init_r(void)
-{
- /* Do pci configuration */
- pci_init();
-
- return 0;
-}
-
-int jumptable_init_r(void)
-{
- jumptable_init();
-
- return 0;
-}
-
-int pcmcia_init_r(void)
-{
- puts("PCMCIA:");
- pcmcia_init();
-
- return 0;
-}
-
-int kgdb_init_r(void)
-{
- puts("KGDB: ");
- kgdb_init();
-
- return 0;
-}
-
-int enable_interrupts_r(void)
-{
- /* enable exceptions */
- enable_interrupts();
-
- return 0;
-}
-
-int eth_initialize_r(void)
-{
- puts("Net: ");
- eth_initialize(gd->bd);
-
- return 0;
-}
-
-int reset_phy_r(void)
-{
-#ifdef DEBUG
- puts("Reset Ethernet PHY\n");
-#endif
- reset_phy();
-
- return 0;
-}
-
-int ide_init_r(void)
-{
- puts("IDE: ");
- ide_init();
-
- return 0;
-}
-
-int scsi_init_r(void)
-{
- puts("SCSI: ");
- scsi_init();
-
- return 0;
-}
-
-#ifdef CONFIG_BITBANGMII
-int bb_miiphy_init_r(void)
-{
- bb_miiphy_init();
-
- return 0;
-}
-#endif
-
-#ifdef CONFIG_POST
-int post_run_r(void)
-{
- post_run(NULL, POST_RAM | post_bootmode_get(0));
-
- return 0;
-}
-#endif
diff --git a/arch/x86/lib/pcat_timer.c b/arch/x86/lib/pcat_timer.c
index b0b6637..1ca3eb9 100644
--- a/arch/x86/lib/pcat_timer.c
+++ b/arch/x86/lib/pcat_timer.c
@@ -24,83 +24,20 @@
#include <common.h>
#include <asm/io.h>
#include <asm/i8254.h>
-#include <asm/ibmpc.h>
-#include <asm/interrupt.h>
-#define TIMER0_VALUE 0x04aa /* 1kHz 1.9318MHz / 1000 */
#define TIMER2_VALUE 0x0a8e /* 440Hz */
-static int timer_init_done;
-
-int timer_init(void)
+int pcat_timer_init(void)
{
- /* initialize timer 0 and 2
- *
- * Timer 0 is used to increment system_tick 1000 times/sec
- * Timer 1 was used for DRAM refresh in early PC's
- * Timer 2 is used to drive the speaker
+ /*
+ * initialize 2, used to drive the speaker
* (to start a beep: write 3 to port 0x61,
* to stop it again: write 0)
*/
- outb(PIT_CMD_CTR0 | PIT_CMD_BOTH | PIT_CMD_MODE2,
- PIT_BASE + PIT_COMMAND);
- outb(TIMER0_VALUE & 0xff, PIT_BASE + PIT_T0);
- outb(TIMER0_VALUE >> 8, PIT_BASE + PIT_T0);
-
outb(PIT_CMD_CTR2 | PIT_CMD_BOTH | PIT_CMD_MODE3,
PIT_BASE + PIT_COMMAND);
outb(TIMER2_VALUE & 0xff, PIT_BASE + PIT_T2);
outb(TIMER2_VALUE >> 8, PIT_BASE + PIT_T2);
- irq_install_handler(0, timer_isr, NULL);
- unmask_irq(0);
-
- timer_init_done = 1;
-
return 0;
}
-
-static u16 read_pit(void)
-{
- u8 low;
-
- outb(PIT_CMD_LATCH, PIT_BASE + PIT_COMMAND);
- low = inb(PIT_BASE + PIT_T0);
-
- return (inb(PIT_BASE + PIT_T0) << 8) | low;
-}
-
-/* this is not very exact */
-void __udelay(unsigned long usec)
-{
- int counter;
- int wraps;
-
- if (timer_init_done) {
- counter = read_pit();
- wraps = usec / 1000;
- usec = usec % 1000;
-
- usec *= 1194;
- usec /= 1000;
- usec += counter;
-
- while (usec > 1194) {
- usec -= 1194;
- wraps++;
- }
-
- while (1) {
- int new_count = read_pit();
-
- if (((new_count < usec) && !wraps) || wraps < 0)
- break;
-
- if (new_count > counter)
- wraps--;
-
- counter = new_count;
- }
- }
-
-}
diff --git a/arch/x86/lib/pci.c b/arch/x86/lib/pci.c
deleted file mode 100644
index 71878dd..0000000
--- a/arch/x86/lib/pci.c
+++ /dev/null
@@ -1,188 +0,0 @@
-/*
- * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <pci.h>
-#include <asm/io.h>
-#include <asm/pci.h>
-
-#undef PCI_ROM_SCAN_VERBOSE
-
-int pci_shadow_rom(pci_dev_t dev, unsigned char *dest)
-{
- struct pci_controller *hose;
- int res = -1;
- int i;
-
- u32 rom_addr;
- u32 addr_reg;
- u32 size;
-
- u16 vendor;
- u16 device;
- u32 class_code;
-
- u32 pci_data;
-
- hose = pci_bus_to_hose(PCI_BUS(dev));
-
- debug("pci_shadow_rom() asked to shadow device %x to %x\n",
- dev, (u32)dest);
-
- pci_read_config_word(dev, PCI_VENDOR_ID, &vendor);
- pci_read_config_word(dev, PCI_DEVICE_ID, &device);
- pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_code);
-
- class_code &= 0xffffff00;
- class_code >>= 8;
-
- debug("PCI Header Vendor %04x device %04x class %06x\n",
- vendor, device, class_code);
-
- /* Enable the rom addess decoder */
- pci_write_config_dword(dev, PCI_ROM_ADDRESS, (u32)PCI_ROM_ADDRESS_MASK);
- pci_read_config_dword(dev, PCI_ROM_ADDRESS, &addr_reg);
-
- if (!addr_reg) {
- /* register unimplemented */
- printf("pci_chadow_rom: device do not seem to have a rom\n");
- return -1;
- }
-
- size = (~(addr_reg&PCI_ROM_ADDRESS_MASK)) + 1;
-
- debug("ROM is %d bytes\n", size);
-
- rom_addr = pci_get_rom_window(hose, size);
-
- debug("ROM mapped at %x\n", rom_addr);
-
- pci_write_config_dword(dev, PCI_ROM_ADDRESS,
- pci_phys_to_mem(dev, rom_addr)
- |PCI_ROM_ADDRESS_ENABLE);
-
-
- for (i = rom_addr; i < rom_addr + size; i += 512) {
- if (readw(i) == 0xaa55) {
-#ifdef PCI_ROM_SCAN_VERBOSE
- printf("ROM signature found\n");
-#endif
- pci_data = readw(0x18 + i);
- pci_data += i;
-
- if (0 == memcmp((void *)pci_data, "PCIR", 4)) {
-#ifdef PCI_ROM_SCAN_VERBOSE
- printf("Fount PCI rom image at offset %d\n",
- i - rom_addr);
- printf("Vendor %04x device %04x class %06x\n",
- readw(pci_data + 4), readw(pci_data + 6),
- readl(pci_data + 0x0d) & 0xffffff);
- printf("%s\n",
- (readw(pci_data + 0x15) & 0x80) ?
- "Last image" : "More images follow");
- switch (readb(pci_data + 0x14)) {
- case 0:
- printf("X86 code\n");
- break;
- case 1:
- printf("Openfirmware code\n");
- break;
- case 2:
- printf("PARISC code\n");
- break;
- }
- printf("Image size %d\n",
- readw(pci_data + 0x10) * 512);
-#endif
- /*
- * FixMe: I think we should compare the class
- * code bytes as well but I have no reference
- * on the exact order of these bytes in the PCI
- * ROM header
- */
- if (readw(pci_data + 4) == vendor &&
- readw(pci_data + 6) == device &&
- readb(pci_data + 0x14) == 0) {
-#ifdef PCI_ROM_SCAN_VERBOSE
- printf("Suitable ROM image found\n");
-#endif
- memmove(dest, (void *)rom_addr,
- readw(pci_data + 0x10) * 512);
- res = 0;
- break;
-
- }
-
- if (readw(pci_data + 0x15) & 0x80)
- break;
- }
- }
-
- }
-
-#ifdef PCI_ROM_SCAN_VERBOSE
- if (res)
- printf("No suitable image found\n");
-#endif
- /* disable PAR register and PCI device ROM address devocer */
- pci_remove_rom_window(hose, rom_addr);
-
- pci_write_config_dword(dev, PCI_ROM_ADDRESS, 0);
-
- return res;
-}
-
-#ifdef PCI_BIOS_DEBUG
-
-void print_bios_bios_stat(void)
-{
- printf("16 bit functions:\n");
- printf("pci_bios_present: %d\n",
- RELOC_16_LONG(0xf000, num_pci_bios_present));
- printf("pci_bios_find_device: %d\n",
- RELOC_16_LONG(0xf000, num_pci_bios_find_device));
- printf("pci_bios_find_class: %d\n",
- RELOC_16_LONG(0xf000, num_pci_bios_find_class));
- printf("pci_bios_generate_special_cycle: %d\n",
- RELOC_16_LONG(0xf000,
- num_pci_bios_generate_special_cycle));
- printf("pci_bios_read_cfg_byte: %d\n",
- RELOC_16_LONG(0xf000, num_pci_bios_read_cfg_byte));
- printf("pci_bios_read_cfg_word: %d\n",
- RELOC_16_LONG(0xf000, num_pci_bios_read_cfg_word));
- printf("pci_bios_read_cfg_dword: %d\n",
- RELOC_16_LONG(0xf000, num_pci_bios_read_cfg_dword));
- printf("pci_bios_write_cfg_byte: %d\n",
- RELOC_16_LONG(0xf000, num_pci_bios_write_cfg_byte));
- printf("pci_bios_write_cfg_word: %d\n",
- RELOC_16_LONG(0xf000, num_pci_bios_write_cfg_word));
- printf("pci_bios_write_cfg_dword: %d\n",
- RELOC_16_LONG(0xf000, num_pci_bios_write_cfg_dword));
- printf("pci_bios_get_irq_routing: %d\n",
- RELOC_16_LONG(0xf000, num_pci_bios_get_irq_routing));
- printf("pci_bios_set_irq: %d\n",
- RELOC_16_LONG(0xf000, num_pci_bios_set_irq));
- printf("pci_bios_unknown_function: %d\n",
- RELOC_16_LONG(0xf000, num_pci_bios_unknown_function));
-}
-#endif
diff --git a/arch/x86/lib/physmem.c b/arch/x86/lib/physmem.c
index 18f0e62..59b3fe9 100644
--- a/arch/x86/lib/physmem.c
+++ b/arch/x86/lib/physmem.c
@@ -12,6 +12,8 @@
#include <physmem.h>
#include <linux/compiler.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/* Large pages are 2MB. */
#define LARGE_PAGE_SIZE ((1 << 20) * 2)
diff --git a/arch/x86/lib/relocate.c b/arch/x86/lib/relocate.c
index f178db9..21982db 100644
--- a/arch/x86/lib/relocate.c
+++ b/arch/x86/lib/relocate.c
@@ -39,6 +39,8 @@
#include <asm/sections.h>
#include <elf.h>
+DECLARE_GLOBAL_DATA_PTR;
+
int copy_uboot_to_ram(void)
{
size_t len = (size_t)&__data_end - (size_t)&__text_start;
diff --git a/arch/x86/lib/timer.c b/arch/x86/lib/timer.c
deleted file mode 100644
index 1f8ce60..0000000
--- a/arch/x86/lib/timer.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * (C) Copyright 2008,2009
- * Graeme Russ, <graeme.russ@gmail.com>
- *
- * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <malloc.h>
-#include <asm/io.h>
-#include <asm/i8254.h>
-#include <asm/ibmpc.h>
-
-struct timer_isr_function {
- struct timer_isr_function *next;
- timer_fnc_t *isr_func;
-};
-
-static struct timer_isr_function *first_timer_isr;
-static unsigned long system_ticks;
-
-/*
- * register_timer_isr() allows multiple architecture and board specific
- * functions to be called every millisecond. Keep the execution time of
- * each function as low as possible
- */
-int register_timer_isr(timer_fnc_t *isr_func)
-{
- struct timer_isr_function *new_func;
- struct timer_isr_function *temp;
- int flag;
-
- new_func = malloc(sizeof(struct timer_isr_function));
-
- if (new_func == NULL)
- return 1;
-
- new_func->isr_func = isr_func;
- new_func->next = NULL;
-
- /*
- * Don't allow timer interrupts while the
- * linked list is being modified
- */
- flag = disable_interrupts();
-
- if (first_timer_isr == NULL) {
- first_timer_isr = new_func;
- } else {
- temp = first_timer_isr;
- while (temp->next != NULL)
- temp = temp->next;
- temp->next = new_func;
- }
-
- if (flag)
- enable_interrupts();
-
- return 0;
-}
-
-/*
- * timer_isr() MUST be the registered interrupt handler for
- */
-void timer_isr(void *unused)
-{
- struct timer_isr_function *temp = first_timer_isr;
-
- system_ticks++;
-
- /* Execute each registered function */
- while (temp != NULL) {
- temp->isr_func();
- temp = temp->next;
- }
-}
-
-ulong get_timer(ulong base)
-{
- return system_ticks - base;
-}
-
-void timer_set_tsc_base(uint64_t new_base)
-{
- gd->arch.tsc_base = new_base;
-}
-
-uint64_t timer_get_tsc(void)
-{
- uint64_t time_now;
-
- time_now = rdtsc();
- if (!gd->arch.tsc_base)
- gd->arch.tsc_base = time_now;
-
- return time_now - gd->arch.tsc_base;
-}
diff --git a/arch/x86/lib/tsc_timer.c b/arch/x86/lib/tsc_timer.c
new file mode 100644
index 0000000..c509801
--- /dev/null
+++ b/arch/x86/lib/tsc_timer.c
@@ -0,0 +1,107 @@
+/*
+ * Copyright (c) 2012 The Chromium OS Authors.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <asm/io.h>
+#include <asm/i8254.h>
+#include <asm/ibmpc.h>
+#include <asm/msr.h>
+#include <asm/u-boot-x86.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void timer_set_base(u64 base)
+{
+ gd->arch.tsc_base = base;
+}
+
+/*
+ * Get the number of CPU time counter ticks since it was read first time after
+ * restart. This yields a free running counter guaranteed to take almost 6
+ * years to wrap around even at 100GHz clock rate.
+ */
+u64 get_ticks(void)
+{
+ u64 now_tick = rdtsc();
+
+ /* We assume that 0 means the base hasn't been set yet */
+ if (!gd->arch.tsc_base)
+ panic("No tick base available");
+ return now_tick - gd->arch.tsc_base;
+}
+
+#define PLATFORM_INFO_MSR 0xce
+
+/* Get the speed of the TSC timer in MHz */
+unsigned long get_tbclk_mhz(void)
+{
+ u32 ratio;
+ u64 platform_info = native_read_msr(PLATFORM_INFO_MSR);
+
+ /* 100MHz times Max Non Turbo ratio */
+ ratio = (platform_info >> 8) & 0xff;
+ return 100 * ratio;
+}
+
+unsigned long get_tbclk(void)
+{
+ return get_tbclk_mhz() * 1000 * 1000;
+}
+
+static ulong get_ms_timer(void)
+{
+ return (get_ticks() * 1000) / get_tbclk();
+}
+
+ulong get_timer(ulong base)
+{
+ return get_ms_timer() - base;
+}
+
+ulong timer_get_us(void)
+{
+ return get_ticks() / get_tbclk_mhz();
+}
+
+ulong timer_get_boot_us(void)
+{
+ return timer_get_us();
+}
+
+void __udelay(unsigned long usec)
+{
+ u64 now = get_ticks();
+ u64 stop;
+
+ stop = now + usec * get_tbclk_mhz();
+
+ while ((int64_t)(stop - get_ticks()) > 0)
+ ;
+}
+
+int timer_init(void)
+{
+#ifdef CONFIG_SYS_PCAT_TIMER
+ /* Set up the PCAT timer if required */
+ pcat_timer_init();
+#endif
+
+ return 0;
+}
diff --git a/arch/x86/lib/zimage.c b/arch/x86/lib/zimage.c
index 4e9e1f7..b54cf12 100644
--- a/arch/x86/lib/zimage.c
+++ b/arch/x86/lib/zimage.c
@@ -283,6 +283,13 @@
void boot_zimage(void *setup_base, void *load_address)
{
+ debug("## Transferring control to Linux (at address %08x) ...\n",
+ (u32)setup_base);
+
+ bootstage_mark_name(BOOTSTAGE_ID_BOOTM_HANDOFF, "start_kernel");
+#ifdef CONFIG_BOOTSTAGE_REPORT
+ bootstage_report();
+#endif
board_final_cleanup();
printf("\nStarting kernel ...\n\n");
@@ -363,10 +370,6 @@
return -1;
}
- printf("## Transferring control to Linux "
- "(at address %08x) ...\n",
- (u32)base_ptr);
-
/* we assume that the kernel is in place */
boot_zimage(base_ptr, load_address);
/* does not return */
diff --git a/board/LaCie/common/cpld-gpio-bus.c b/board/LaCie/common/cpld-gpio-bus.c
new file mode 100644
index 0000000..fb9bf8d
--- /dev/null
+++ b/board/LaCie/common/cpld-gpio-bus.c
@@ -0,0 +1,50 @@
+/*
+ * cpld-gpio-bus.c: provides support for the CPLD GPIO bus found on some LaCie
+ * boards (as the 2Big/5Big Network v2 and the 2Big NAS). This parallel GPIO
+ * bus exposes two registers (address and data). Each of this register is made
+ * up of several dedicated GPIOs. An extra GPIO is used to notify the CPLD that
+ * the registers have been updated.
+ *
+ * Mostly this bus is used to configure the LEDs on LaCie boards.
+ *
+ * Copyright (C) 2013 Simon Guinot <simon.guinot@sequanux.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <asm/arch/gpio.h>
+#include "cpld-gpio-bus.h"
+
+static void cpld_gpio_bus_set_addr(struct cpld_gpio_bus *bus, unsigned addr)
+{
+ int pin;
+
+ for (pin = 0; pin < bus->num_addr; pin++)
+ kw_gpio_set_value(bus->addr[pin], (addr >> pin) & 1);
+}
+
+static void cpld_gpio_bus_set_data(struct cpld_gpio_bus *bus, unsigned data)
+{
+ int pin;
+
+ for (pin = 0; pin < bus->num_data; pin++)
+ kw_gpio_set_value(bus->data[pin], (data >> pin) & 1);
+}
+
+static void cpld_gpio_bus_enable_select(struct cpld_gpio_bus *bus)
+{
+ /* The transfer is enabled on the raising edge. */
+ kw_gpio_set_value(bus->enable, 0);
+ kw_gpio_set_value(bus->enable, 1);
+}
+
+void cpld_gpio_bus_write(struct cpld_gpio_bus *bus,
+ unsigned addr, unsigned value)
+{
+ cpld_gpio_bus_set_addr(bus, addr);
+ cpld_gpio_bus_set_data(bus, value);
+ cpld_gpio_bus_enable_select(bus);
+}
diff --git a/board/LaCie/common/cpld-gpio-bus.h b/board/LaCie/common/cpld-gpio-bus.h
new file mode 100644
index 0000000..e9e9b96
--- /dev/null
+++ b/board/LaCie/common/cpld-gpio-bus.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright (C) 2013 Simon Guinot <simon.guinot@sequanux.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#ifndef _LACIE_CPLD_GPI0_BUS_H
+#define _LACIE_CPLD_GPI0_BUS_H
+
+struct cpld_gpio_bus {
+ unsigned *addr;
+ unsigned num_addr;
+ unsigned *data;
+ unsigned num_data;
+ unsigned enable;
+};
+
+void cpld_gpio_bus_write(struct cpld_gpio_bus *cpld_gpio_bus,
+ unsigned addr, unsigned value);
+
+#endif /* _LACIE_CPLD_GPI0_BUS_H */
diff --git a/board/LaCie/net2big_v2/Makefile b/board/LaCie/net2big_v2/Makefile
index fbae48e..9a6dfb6 100644
--- a/board/LaCie/net2big_v2/Makefile
+++ b/board/LaCie/net2big_v2/Makefile
@@ -28,6 +28,9 @@
LIB = $(obj)lib$(BOARD).o
COBJS := $(BOARD).o ../common/common.o
+ifneq ($(and $(CONFIG_KIRKWOOD_GPIO),$(CONFIG_NET2BIG_V2)),)
+COBJS += ../common/cpld-gpio-bus.o
+endif
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/LaCie/net2big_v2/kwbimage.cfg b/board/LaCie/net2big_v2/kwbimage.cfg
index 8d9f153..d3904d3 100644
--- a/board/LaCie/net2big_v2/kwbimage.cfg
+++ b/board/LaCie/net2big_v2/kwbimage.cfg
@@ -19,7 +19,7 @@
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
-# Refer docs/README.kwimage for more details about how-to configure
+# Refer doc/README.kwbimage for more details about how-to configure
# and create kirkwood boot image
#
diff --git a/board/LaCie/net2big_v2/net2big_v2.c b/board/LaCie/net2big_v2/net2big_v2.c
index e524f35..b133f7c 100644
--- a/board/LaCie/net2big_v2/net2big_v2.c
+++ b/board/LaCie/net2big_v2/net2big_v2.c
@@ -22,6 +22,7 @@
#include <common.h>
#include <command.h>
+#include <i2c.h>
#include <asm/arch/cpu.h>
#include <asm/arch/kirkwood.h>
#include <asm/arch/mpp.h>
@@ -29,6 +30,7 @@
#include "net2big_v2.h"
#include "../common/common.h"
+#include "../common/cpld-gpio-bus.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -60,18 +62,18 @@
MPP24_GPIO, /* USB mode select */
MPP26_GPIO, /* USB device vbus */
MPP28_GPIO, /* USB enable host vbus */
- MPP29_GPIO, /* GPIO extension ALE */
+ MPP29_GPIO, /* CPLD GPIO bus ALE */
MPP34_GPIO, /* Rear Push button 0=on 1=off */
MPP35_GPIO, /* Inhibit switch power-off */
MPP36_GPIO, /* SATA HDD1 presence */
MPP37_GPIO, /* SATA HDD2 presence */
MPP40_GPIO, /* eSATA presence */
- MPP44_GPIO, /* GPIO extension (data 0) */
- MPP45_GPIO, /* GPIO extension (data 1) */
- MPP46_GPIO, /* GPIO extension (data 2) */
- MPP47_GPIO, /* GPIO extension (addr 0) */
- MPP48_GPIO, /* GPIO extension (addr 1) */
- MPP49_GPIO, /* GPIO extension (addr 2) */
+ MPP44_GPIO, /* CPLD GPIO bus (data 0) */
+ MPP45_GPIO, /* CPLD GPIO bus (data 1) */
+ MPP46_GPIO, /* CPLD GPIO bus (data 2) */
+ MPP47_GPIO, /* CPLD GPIO bus (addr 0) */
+ MPP48_GPIO, /* CPLD GPIO bus (addr 1) */
+ MPP49_GPIO, /* CPLD GPIO bus (addr 2) */
0
};
@@ -92,8 +94,142 @@
}
#if defined(CONFIG_MISC_INIT_R)
+
+#if defined(CONFIG_CMD_I2C) && defined(CONFIG_SYS_I2C_G762_ADDR)
+/*
+ * Start I2C fan (GMT G762 controller)
+ */
+static void init_fan(void)
+{
+ u8 data;
+
+ i2c_set_bus_num(0);
+
+ /* Enable open-loop and PWM modes */
+ data = 0x20;
+ if (i2c_write(CONFIG_SYS_I2C_G762_ADDR,
+ G762_REG_FAN_CMD1, 1, &data, 1) != 0)
+ goto err;
+ data = 0;
+ if (i2c_write(CONFIG_SYS_I2C_G762_ADDR,
+ G762_REG_SET_CNT, 1, &data, 1) != 0)
+ goto err;
+ /*
+ * RPM to PWM (set_out register) fan speed conversion array:
+ * 0 0x00
+ * 1500 0x04
+ * 2800 0x08
+ * 3400 0x0C
+ * 3700 0x10
+ * 4400 0x20
+ * 4700 0x30
+ * 4800 0x50
+ * 5200 0x80
+ * 5400 0xC0
+ * 5500 0xFF
+ *
+ * Start fan at low speed (2800 RPM):
+ */
+ data = 0x08;
+ if (i2c_write(CONFIG_SYS_I2C_G762_ADDR,
+ G762_REG_SET_OUT, 1, &data, 1) != 0)
+ goto err;
+
+ return;
+err:
+ printf("Error: failed to start I2C fan @%02x\n",
+ CONFIG_SYS_I2C_G762_ADDR);
+}
+#else
+static void init_fan(void) {}
+#endif /* CONFIG_CMD_I2C && CONFIG_SYS_I2C_G762_ADDR */
+
+#if defined(CONFIG_NET2BIG_V2) && defined(CONFIG_KIRKWOOD_GPIO)
+/*
+ * CPLD GPIO bus:
+ *
+ * - address register : bit [0-2] -> GPIO [47-49]
+ * - data register : bit [0-2] -> GPIO [44-46]
+ * - enable register : GPIO 29
+ */
+static unsigned cpld_gpio_bus_addr[] = { 47, 48, 49 };
+static unsigned cpld_gpio_bus_data[] = { 44, 45, 46 };
+
+static struct cpld_gpio_bus cpld_gpio_bus = {
+ .addr = cpld_gpio_bus_addr,
+ .num_addr = ARRAY_SIZE(cpld_gpio_bus_addr),
+ .data = cpld_gpio_bus_data,
+ .num_data = ARRAY_SIZE(cpld_gpio_bus_data),
+ .enable = 29,
+};
+
+/*
+ * LEDs configuration:
+ *
+ * The LEDs are controlled by a CPLD and can be configured through
+ * the CPLD GPIO bus.
+ *
+ * Address register selection:
+ *
+ * addr | register
+ * ----------------------------
+ * 0 | front LED
+ * 1 | front LED brightness
+ * 2 | SATA LED brightness
+ * 3 | SATA0 LED
+ * 4 | SATA1 LED
+ * 5 | SATA2 LED
+ * 6 | SATA3 LED
+ * 7 | SATA4 LED
+ *
+ * Data register configuration:
+ *
+ * data | LED brightness
+ * -------------------------------------------------
+ * 0 | min (off)
+ * - | -
+ * 7 | max
+ *
+ * data | front LED mode
+ * -------------------------------------------------
+ * 0 | fix off
+ * 1 | fix blue on
+ * 2 | fix red on
+ * 3 | blink blue on=1 sec and blue off=1 sec
+ * 4 | blink red on=1 sec and red off=1 sec
+ * 5 | blink blue on=2.5 sec and red on=0.5 sec
+ * 6 | blink blue on=1 sec and red on=1 sec
+ * 7 | blink blue on=0.5 sec and blue off=2.5 sec
+ *
+ * data | SATA LED mode
+ * -------------------------------------------------
+ * 0 | fix off
+ * 1 | SATA activity blink
+ * 2 | fix red on
+ * 3 | blink blue on=1 sec and blue off=1 sec
+ * 4 | blink red on=1 sec and red off=1 sec
+ * 5 | blink blue on=2.5 sec and red on=0.5 sec
+ * 6 | blink blue on=1 sec and red on=1 sec
+ * 7 | fix blue on
+ */
+static void init_leds(void)
+{
+ /* Enable the front blue LED */
+ cpld_gpio_bus_write(&cpld_gpio_bus, 0, 1);
+ cpld_gpio_bus_write(&cpld_gpio_bus, 1, 3);
+
+ /* Configure SATA LEDs to blink in relation with the SATA activity */
+ cpld_gpio_bus_write(&cpld_gpio_bus, 3, 1);
+ cpld_gpio_bus_write(&cpld_gpio_bus, 4, 1);
+ cpld_gpio_bus_write(&cpld_gpio_bus, 2, 3);
+}
+#else
+static void init_leds(void) {}
+#endif /* CONFIG_NET2BIG_V2 && CONFIG_KIRKWOOD_GPIO */
+
int misc_init_r(void)
{
+ init_fan();
#if defined(CONFIG_CMD_I2C) && defined(CONFIG_SYS_I2C_EEPROM_ADDR)
if (!getenv("ethaddr")) {
uchar mac[6];
@@ -101,9 +237,11 @@
eth_setenv_enetaddr("ethaddr", mac);
}
#endif
+ init_leds();
+
return 0;
}
-#endif
+#endif /* CONFIG_MISC_INIT_R */
#if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R)
/* Configure and initialize PHY */
diff --git a/board/LaCie/net2big_v2/net2big_v2.h b/board/LaCie/net2big_v2/net2big_v2.h
index f9778f4..83537d6 100644
--- a/board/LaCie/net2big_v2/net2big_v2.h
+++ b/board/LaCie/net2big_v2/net2big_v2.h
@@ -32,4 +32,9 @@
/* Buttons */
#define NET2BIG_V2_GPIO_PUSH_BUTTON 34
+/* GMT G762 registers (I2C fan controller) */
+#define G762_REG_SET_CNT 0x00
+#define G762_REG_SET_OUT 0x03
+#define G762_REG_FAN_CMD1 0x04
+
#endif /* NET2BIG_V2_H */
diff --git a/board/LaCie/netspace_v2/kwbimage-is2.cfg b/board/LaCie/netspace_v2/kwbimage-is2.cfg
index 590720a..93b803c 100644
--- a/board/LaCie/netspace_v2/kwbimage-is2.cfg
+++ b/board/LaCie/netspace_v2/kwbimage-is2.cfg
@@ -19,7 +19,7 @@
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
-# Refer docs/README.kwimage for more details about how-to configure
+# Refer doc/README.kwbimage for more details about how-to configure
# and create kirkwood boot image
#
diff --git a/board/LaCie/netspace_v2/kwbimage-ns2l.cfg b/board/LaCie/netspace_v2/kwbimage-ns2l.cfg
index d008eb0..0a8a514 100644
--- a/board/LaCie/netspace_v2/kwbimage-ns2l.cfg
+++ b/board/LaCie/netspace_v2/kwbimage-ns2l.cfg
@@ -19,7 +19,7 @@
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
-# Refer docs/README.kwimage for more details about how-to configure
+# Refer doc/README.kwbimage for more details about how-to configure
# and create kirkwood boot image
#
diff --git a/board/LaCie/netspace_v2/kwbimage.cfg b/board/LaCie/netspace_v2/kwbimage.cfg
index 7e53649..0cf4682 100644
--- a/board/LaCie/netspace_v2/kwbimage.cfg
+++ b/board/LaCie/netspace_v2/kwbimage.cfg
@@ -19,7 +19,7 @@
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
-# Refer docs/README.kwimage for more details about how-to configure
+# Refer doc/README.kwbimage for more details about how-to configure
# and create kirkwood boot image
#
diff --git a/board/LaCie/wireless_space/kwbimage.cfg b/board/LaCie/wireless_space/kwbimage.cfg
index 0daf5b5..aeddc0c 100644
--- a/board/LaCie/wireless_space/kwbimage.cfg
+++ b/board/LaCie/wireless_space/kwbimage.cfg
@@ -22,7 +22,7 @@
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
-# Refer docs/README.kwimage for more details about how-to configure
+# Refer doc/README.kwbimage for more details about how-to configure
# and create kirkwood boot image
#
diff --git a/board/Marvell/dreamplug/kwbimage.cfg b/board/Marvell/dreamplug/kwbimage.cfg
index ca9cd74..e662b2d 100644
--- a/board/Marvell/dreamplug/kwbimage.cfg
+++ b/board/Marvell/dreamplug/kwbimage.cfg
@@ -24,7 +24,7 @@
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
# MA 02110-1301 USA
#
-# Refer docs/README.kwimage for more details about how-to configure
+# Refer doc/README.kwbimage for more details about how-to configure
# and create kirkwood boot image
#
diff --git a/board/Marvell/guruplug/kwbimage.cfg b/board/Marvell/guruplug/kwbimage.cfg
index 2afd927..9baf6bc 100644
--- a/board/Marvell/guruplug/kwbimage.cfg
+++ b/board/Marvell/guruplug/kwbimage.cfg
@@ -21,7 +21,7 @@
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
# MA 02110-1301 USA
#
-# Refer docs/README.kwimage for more details about how-to configure
+# Refer doc/README.kwbimage for more details about how-to configure
# and create kirkwood boot image
#
diff --git a/board/Marvell/mv88f6281gtw_ge/kwbimage.cfg b/board/Marvell/mv88f6281gtw_ge/kwbimage.cfg
index ec2513f..f74d443 100644
--- a/board/Marvell/mv88f6281gtw_ge/kwbimage.cfg
+++ b/board/Marvell/mv88f6281gtw_ge/kwbimage.cfg
@@ -21,7 +21,7 @@
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
# MA 02110-1301 USA
#
-# Refer docs/README.kwimage for more details about how-to configure
+# Refer doc/README.kwbimage for more details about how-to configure
# and create kirkwood boot image
#
diff --git a/board/Marvell/openrd/kwbimage.cfg b/board/Marvell/openrd/kwbimage.cfg
index 757eb28..19d0bac 100644
--- a/board/Marvell/openrd/kwbimage.cfg
+++ b/board/Marvell/openrd/kwbimage.cfg
@@ -21,7 +21,7 @@
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
# MA 02110-1301 USA
#
-# Refer docs/README.kwimage for more details about how-to configure
+# Refer doc/README.kwbimage for more details about how-to configure
# and create kirkwood boot image
#
diff --git a/board/Marvell/rd6281a/kwbimage.cfg b/board/Marvell/rd6281a/kwbimage.cfg
index 0d12dd9..c8b5d74 100644
--- a/board/Marvell/rd6281a/kwbimage.cfg
+++ b/board/Marvell/rd6281a/kwbimage.cfg
@@ -21,7 +21,7 @@
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
# MA 02110-1301 USA
#
-# Refer docs/README.kwimage for more details about how-to configure
+# Refer doc/README.kwbimage for more details about how-to configure
# and create kirkwood boot image
#
diff --git a/board/Seagate/dockstar/kwbimage.cfg b/board/Seagate/dockstar/kwbimage.cfg
index 98b514d..4b0351d 100644
--- a/board/Seagate/dockstar/kwbimage.cfg
+++ b/board/Seagate/dockstar/kwbimage.cfg
@@ -24,7 +24,7 @@
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
# MA 02110-1301 USA
#
-# Refer docs/README.kwimage for more details about how-to configure
+# Refer doc/README.kwbimage for more details about how-to configure
# and create kirkwood boot image
#
diff --git a/board/ti/omap2420h4/Makefile b/board/Seagate/goflexhome/Makefile
similarity index 69%
copy from board/ti/omap2420h4/Makefile
copy to board/Seagate/goflexhome/Makefile
index cddd7e6..9948fe2 100644
--- a/board/ti/omap2420h4/Makefile
+++ b/board/Seagate/goflexhome/Makefile
@@ -1,6 +1,13 @@
#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+# Copyright (C) 2013 Suriyan Ramasami <suriyan.r@gmail.com>
+#
+# Based on dockstar/Makefile originally written by
+# Copyright (C) 2010 Eric C. Cooper <ecc@cmu.edu>
+#
+# Based on sheevaplug/Makefile originally written by
+# Prafulla Wadaskar <prafulla@marvell.com>
+# (C) Copyright 2009
+# Marvell Semiconductor <www.marvell.com>
#
# See file CREDITS for list of people who contributed to this
# project.
@@ -12,21 +19,20 @@
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+# MA 02110-1301 USA
#
include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).o
-COBJS := omap2420h4.o mem.o sys_info.o
-SOBJS := lowlevel_init.o
+COBJS := goflexhome.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/Seagate/goflexhome/goflexhome.c b/board/Seagate/goflexhome/goflexhome.c
new file mode 100644
index 0000000..17c1905
--- /dev/null
+++ b/board/Seagate/goflexhome/goflexhome.c
@@ -0,0 +1,189 @@
+/*
+ * Copyright (C) 2013 Suriyan Ramasami <suriyan.r@gmail.com>
+ *
+ * Based on dockstar.c originally written by
+ * Copyright (C) 2010 Eric C. Cooper <ecc@cmu.edu>
+ *
+ * Based on sheevaplug.c originally written by
+ * Prafulla Wadaskar <prafulla@marvell.com>
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <common.h>
+#include <miiphy.h>
+#include <asm/arch/kirkwood.h>
+#include <asm/arch/mpp.h>
+#include <asm/arch/cpu.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_early_init_f(void)
+{
+ /* Multi-Purpose Pins Functionality configuration */
+ static const u32 kwmpp_config[] = {
+ MPP0_NF_IO2,
+ MPP1_NF_IO3,
+ MPP2_NF_IO4,
+ MPP3_NF_IO5,
+ MPP4_NF_IO6,
+ MPP5_NF_IO7,
+ MPP6_SYSRST_OUTn,
+ MPP7_GPO,
+ MPP8_UART0_RTS,
+ MPP9_UART0_CTS,
+ MPP10_UART0_TXD,
+ MPP11_UART0_RXD,
+ MPP12_SD_CLK,
+ MPP13_SD_CMD,
+ MPP14_SD_D0,
+ MPP15_SD_D1,
+ MPP16_SD_D2,
+ MPP17_SD_D3,
+ MPP18_NF_IO0,
+ MPP19_NF_IO1,
+ MPP20_GPIO,
+ MPP21_GPIO,
+ MPP22_GPIO,
+ MPP23_GPIO,
+ MPP24_GPIO,
+ MPP25_GPIO,
+ MPP26_GPIO,
+ MPP27_GPIO,
+ MPP28_GPIO,
+ MPP29_TSMP9,
+ MPP30_GPIO,
+ MPP31_GPIO,
+ MPP32_GPIO,
+ MPP33_GPIO,
+ MPP34_GPIO,
+ MPP35_GPIO,
+ MPP36_GPIO,
+ MPP37_GPIO,
+ MPP38_GPIO,
+ MPP39_GPIO,
+ MPP40_GPIO,
+ MPP41_GPIO,
+ MPP42_GPIO,
+ MPP43_GPIO,
+ MPP44_GPIO,
+ MPP45_GPIO,
+ MPP46_GPIO,
+ MPP47_GPIO,
+ MPP48_GPIO,
+ MPP49_GPIO,
+ 0
+ };
+
+ /*
+ * default gpio configuration
+ * There are maximum 64 gpios controlled through 2 sets of registers
+ * the below configuration configures mainly initial LED status
+ */
+ kw_config_gpio(GOFLEXHOME_OE_VAL_LOW,
+ GOFLEXHOME_OE_VAL_HIGH,
+ GOFLEXHOME_OE_LOW, GOFLEXHOME_OE_HIGH);
+ kirkwood_mpp_conf(kwmpp_config, NULL);
+ return 0;
+}
+
+int board_init(void)
+{
+ /*
+ * arch number of board
+ */
+ gd->bd->bi_arch_number = MACH_TYPE_GOFLEXHOME;
+
+ /* address of boot parameters */
+ gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100;
+
+ return 0;
+}
+
+#ifdef CONFIG_RESET_PHY_R
+/* Configure and enable MV88E1116 PHY */
+void reset_phy(void)
+{
+ u16 reg;
+ u16 devadr;
+ char *name = "egiga0";
+
+ if (miiphy_set_current_dev(name))
+ return;
+
+ /* command to read PHY dev address */
+ if (miiphy_read(name, 0xEE, 0xEE, (u16 *)&devadr)) {
+ printf("Err..%s could not read PHY dev address\n",
+ __func__);
+ return;
+ }
+
+ /*
+ * Enable RGMII delay on Tx and Rx for CPU port
+ * Ref: sec 4.7.2 of chip datasheet
+ */
+ miiphy_write(name, devadr, MV88E1116_PGADR_REG, 2);
+ miiphy_read(name, devadr, MV88E1116_MAC_CTRL_REG, ®);
+ reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL);
+ miiphy_write(name, devadr, MV88E1116_MAC_CTRL_REG, reg);
+ miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0);
+
+ /* reset the phy */
+ miiphy_reset(name, devadr);
+
+ printf("88E1116 Initialized on %s\n", name);
+}
+#endif /* CONFIG_RESET_PHY_R */
+
+#define GREEN_LED (1 << 14)
+#define ORANGE_LED (1 << 15)
+#define BOTH_LEDS (GREEN_LED | ORANGE_LED)
+#define NEITHER_LED 0
+
+static void set_leds(u32 leds, u32 blinking)
+{
+ struct kwgpio_registers *r;
+ u32 oe;
+ u32 bl;
+
+ r = (struct kwgpio_registers *)KW_GPIO1_BASE;
+ oe = readl(&r->oe) | BOTH_LEDS;
+ writel(oe & ~leds, &r->oe); /* active low */
+ bl = readl(&r->blink_en) & ~BOTH_LEDS;
+ writel(bl | blinking, &r->blink_en);
+}
+
+void show_boot_progress(int val)
+{
+ switch (val) {
+ case BOOTSTAGE_ID_RUN_OS: /* booting Linux */
+ set_leds(BOTH_LEDS, NEITHER_LED);
+ break;
+ case BOOTSTAGE_ID_NET_ETH_START: /* Ethernet initialization */
+ set_leds(GREEN_LED, GREEN_LED);
+ break;
+ default:
+ if (val < 0) /* error */
+ set_leds(ORANGE_LED, ORANGE_LED);
+ break;
+ }
+}
diff --git a/board/Seagate/goflexhome/kwbimage.cfg b/board/Seagate/goflexhome/kwbimage.cfg
new file mode 100644
index 0000000..e984d72
--- /dev/null
+++ b/board/Seagate/goflexhome/kwbimage.cfg
@@ -0,0 +1,168 @@
+#
+# Copyright (C) 2013 Suriyan Ramasami <suriyan.r@gmail.com>
+#
+# Based on dockstar/kwbimage.cfg originally written by
+# Copyright (C) 2010 Eric C. Cooper <ecc@cmu.edu>
+#
+# Based on sheevaplug/kwbimage.cfg originally written by
+# Prafulla Wadaskar <prafulla@marvell.com>
+# (C) Copyright 2009
+# Marvell Semiconductor <www.marvell.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+# MA 02110-1301 USA
+#
+# Refer docs/README.kwimage for more details about how-to configure
+# and create kirkwood boot image
+#
+
+# Boot Media configurations
+BOOT_FROM nand
+NAND_ECC_MODE default
+NAND_PAGE_SIZE 0x0800
+
+# SOC registers configuration using bootrom header extension
+# Maximum KWBIMAGE_MAX_CONFIG configurations allowed
+
+# Configure RGMII-0 interface pad voltage to 1.8V
+DATA 0xFFD100e0 0x1b1b1b9b
+
+#Dram initalization for SINGLE x16 CL=5 @ 400MHz
+DATA 0xFFD01400 0x43000c30 # DDR Configuration register
+# bit13-0: 0xc30 (3120 DDR2 clks refresh rate)
+# bit23-14: zero
+# bit24: 1= enable exit self refresh mode on DDR access
+# bit25: 1 required
+# bit29-26: zero
+# bit31-30: 01
+
+DATA 0xFFD01404 0x37543000 # DDR Controller Control Low
+# bit 4: 0=addr/cmd in smame cycle
+# bit 5: 0=clk is driven during self refresh, we don't care for APX
+# bit 6: 0=use recommended falling edge of clk for addr/cmd
+# bit14: 0=input buffer always powered up
+# bit18: 1=cpu lock transaction enabled
+# bit23-20: 5=recommended value for CL=5 and STARTBURST_DEL disabled bit31=0
+# bit27-24: 7= CL+2, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM
+# bit30-28: 3 required
+# bit31: 0=no additional STARTBURST delay
+
+DATA 0xFFD01408 0x22125451 # DDR Timing (Low) (active cycles value +1)
+# bit3-0: TRAS lsbs
+# bit7-4: TRCD
+# bit11- 8: TRP
+# bit15-12: TWR
+# bit19-16: TWTR
+# bit20: TRAS msb
+# bit23-21: 0x0
+# bit27-24: TRRD
+# bit31-28: TRTP
+
+DATA 0xFFD0140C 0x00000a33 # DDR Timing (High)
+# bit6-0: TRFC
+# bit8-7: TR2R
+# bit10-9: TR2W
+# bit12-11: TW2W
+# bit31-13: zero required
+
+DATA 0xFFD01410 0x0000000d # DDR Address Control
+# bit1-0: 00, Cs0width=x8
+# bit3-2: 11, Cs0size=1Gb
+# bit5-4: 00, Cs1width=nonexistent
+# bit7-6: 00, Cs1size =nonexistent
+# bit9-8: 00, Cs2width=nonexistent
+# bit11-10: 00, Cs2size =nonexistent
+# bit13-12: 00, Cs3width=nonexistent
+# bit15-14: 00, Cs3size =nonexistent
+# bit16: 0, Cs0AddrSel
+# bit17: 0, Cs1AddrSel
+# bit18: 0, Cs2AddrSel
+# bit19: 0, Cs3AddrSel
+# bit31-20: 0 required
+
+DATA 0xFFD01414 0x00000000 # DDR Open Pages Control
+# bit0: 0, OpenPage enabled
+# bit31-1: 0 required
+
+DATA 0xFFD01418 0x00000000 # DDR Operation
+# bit3-0: 0x0, DDR cmd
+# bit31-4: 0 required
+
+DATA 0xFFD0141C 0x00000C52 # DDR Mode
+# bit2-0: 2, BurstLen=2 required
+# bit3: 0, BurstType=0 required
+# bit6-4: 4, CL=5
+# bit7: 0, TestMode=0 normal
+# bit8: 0, DLL reset=0 normal
+# bit11-9: 6, auto-precharge write recovery ????????????
+# bit12: 0, PD must be zero
+# bit31-13: 0 required
+
+DATA 0xFFD01420 0x00000040 # DDR Extended Mode
+# bit0: 0, DDR DLL enabled
+# bit1: 0, DDR drive strenght normal
+# bit2: 0, DDR ODT control lsd (disabled)
+# bit5-3: 000, required
+# bit6: 1, DDR ODT control msb, (disabled)
+# bit9-7: 000, required
+# bit10: 0, differential DQS enabled
+# bit11: 0, required
+# bit12: 0, DDR output buffer enabled
+# bit31-13: 0 required
+
+DATA 0xFFD01424 0x0000F17F # DDR Controller Control High
+# bit2-0: 111, required
+# bit3 : 1 , MBUS Burst Chop disabled
+# bit6-4: 111, required
+# bit7 : 0
+# bit8 : 1 , add writepath sample stage, must be 1 for DDR freq >= 300MHz
+# bit9 : 0 , no half clock cycle addition to dataout
+# bit10 : 0 , 1/4 clock cycle skew enabled for addr/ctl signals
+# bit11 : 0 , 1/4 clock cycle skew disabled for write mesh
+# bit15-12: 1111 required
+# bit31-16: 0 required
+
+DATA 0xFFD01428 0x00085520 # DDR2 ODT Read Timing (default values)
+DATA 0xFFD0147C 0x00008552 # DDR2 ODT Write Timing (default values)
+
+DATA 0xFFD01500 0x00000000 # CS[0]n Base address to 0x0
+DATA 0xFFD01504 0x07FFFFF1 # CS[0]n Size
+# bit0: 1, Window enabled
+# bit1: 0, Write Protect disabled
+# bit3-2: 00, CS0 hit selected
+# bit23-4: ones, required
+# bit31-24: 0x07, Size (i.e. 128MB)
+
+DATA 0xFFD01508 0x10000000 # CS[1]n Base address to 256Mb
+DATA 0xFFD0150C 0x00000000 # CS[1]n Size, window disabled
+
+DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled
+DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled
+
+DATA 0xFFD01494 0x00030000 # DDR ODT Control (Low)
+DATA 0xFFD01498 0x00000000 # DDR ODT Control (High)
+# bit1-0: 00, ODT0 controlled by ODT Control (low) register above
+# bit3-2: 01, ODT1 active NEVER!
+# bit31-4: zero, required
+
+DATA 0xFFD0149C 0x0000E803 # CPU ODT Control
+DATA 0xFFD01480 0x00000001 # DDR Initialization Control
+#bit0=1, enable DDR init upon this register write
+
+# End of Header extension
+DATA 0x0 0x0
diff --git a/board/actux1/u-boot.lds b/board/actux1/u-boot.lds
index ef4a25b..74aec5f 100644
--- a/board/actux1/u-boot.lds
+++ b/board/actux1/u-boot.lds
@@ -30,6 +30,7 @@
. = ALIGN (4);
.text : {
+ *(.__image_copy_start)
arch/arm/cpu/ixp/start.o(.text*)
net/libnet.o(.text*)
board/actux1/libactux1.o(.text*)
@@ -62,17 +63,23 @@
. = ALIGN (4);
- __image_copy_end = .;
-
- .rel.dyn : {
- __rel_dyn_start = .;
- *(.rel*)
- __rel_dyn_end = .;
+ .image_copy_end :
+ {
+ *(.__image_copy_end)
}
- .dynsym : {
- __dynsym_start = .;
- *(.dynsym)
+ .rel_dyn_start :
+ {
+ *(.__rel_dyn_start)
+ }
+
+ .rel.dyn : {
+ *(.rel*)
+ }
+
+ .rel_dyn_end :
+ {
+ *(.__rel_dyn_end)
}
_end = .;
@@ -96,6 +103,7 @@
KEEP(*(.__bss_end));
}
+ /DISCARD/ : { *(.dynsym) }
/DISCARD/ : { *(.dynstr*) }
/DISCARD/ : { *(.dynamic*) }
/DISCARD/ : { *(.plt*) }
diff --git a/board/actux2/u-boot.lds b/board/actux2/u-boot.lds
index 00ad8b7..c276501 100644
--- a/board/actux2/u-boot.lds
+++ b/board/actux2/u-boot.lds
@@ -30,6 +30,7 @@
. = ALIGN (4);
.text : {
+ *(.__image_copy_start)
arch/arm/cpu/ixp/start.o(.text*)
net/libnet.o(.text*)
board/actux2/libactux2.o(.text*)
@@ -62,17 +63,23 @@
. = ALIGN (4);
- __image_copy_end = .;
-
- .rel.dyn : {
- __rel_dyn_start = .;
- *(.rel*)
- __rel_dyn_end = .;
+ .image_copy_end :
+ {
+ *(.__image_copy_end)
}
- .dynsym : {
- __dynsym_start = .;
- *(.dynsym)
+ .rel_dyn_start :
+ {
+ *(.__rel_dyn_start)
+ }
+
+ .rel.dyn : {
+ *(.rel*)
+ }
+
+ .rel_dyn_end :
+ {
+ *(.__rel_dyn_end)
}
_end = .;
@@ -96,6 +103,7 @@
KEEP(*(.__bss_end));
}
+ /DISCARD/ : { *(.dynsym) }
/DISCARD/ : { *(.dynstr*) }
/DISCARD/ : { *(.dynamic*) }
/DISCARD/ : { *(.plt*) }
diff --git a/board/actux3/u-boot.lds b/board/actux3/u-boot.lds
index 44b990e..5610644 100644
--- a/board/actux3/u-boot.lds
+++ b/board/actux3/u-boot.lds
@@ -30,6 +30,7 @@
. = ALIGN (4);
.text : {
+ *(.__image_copy_start)
arch/arm/cpu/ixp/start.o(.text*)
net/libnet.o(.text*)
board/actux3/libactux3.o(.text*)
@@ -62,17 +63,23 @@
. = ALIGN (4);
- __image_copy_end = .;
-
- .rel.dyn : {
- __rel_dyn_start = .;
- *(.rel*)
- __rel_dyn_end = .;
+ .image_copy_end :
+ {
+ *(.__image_copy_end)
}
- .dynsym : {
- __dynsym_start = .;
- *(.dynsym)
+ .rel_dyn_start :
+ {
+ *(.__rel_dyn_start)
+ }
+
+ .rel.dyn : {
+ *(.rel*)
+ }
+
+ .rel_dyn_end :
+ {
+ *(.__rel_dyn_end)
}
_end = .;
@@ -96,6 +103,7 @@
KEEP(*(.__bss_end));
}
+ /DISCARD/ : { *(.dynsym) }
/DISCARD/ : { *(.dynstr*) }
/DISCARD/ : { *(.dynamic*) }
/DISCARD/ : { *(.plt*) }
diff --git a/board/ait/cam_enc_4xx/u-boot-spl.lds b/board/ait/cam_enc_4xx/u-boot-spl.lds
index 1daa1b3..3972685 100644
--- a/board/ait/cam_enc_4xx/u-boot-spl.lds
+++ b/board/ait/cam_enc_4xx/u-boot-spl.lds
@@ -54,11 +54,6 @@
__rel_dyn_end = .;
} >.sram
- .dynsym : {
- __dynsym_start = .;
- *(.dynsym)
- } >.sram
-
.bss :
{
. = ALIGN(4);
diff --git a/board/alaska/README b/board/alaska/README
deleted file mode 100644
index 3345073..0000000
--- a/board/alaska/README
+++ /dev/null
@@ -1,482 +0,0 @@
-Freescale Alaska MPC8220 board
-==============================
-
-TsiChung Liew(Tsi-Chung.Liew@freescale.com)
-Created 9/21/04
-===========================================
-
-
-Changed files:
-==============
-
-- Makefile added MPC8220 and Alaska8220_config
-- MAKEALL added MPC8220 and Alaska8220
-- README added CONFIG_MPC8220, Alaska8220_config
-
-- common/cmd_bdinfo.c added board information members for MPC8220
-- common/cmd_bootm.c added clocks for MPC8220 in do_bootm_linux()
-
-- include/common.h added CONFIG_MPC8220
-
-- include/asm-ppc/u-boot.h added board information members for MPC8220
-- include/asm-ppc/global_data.h added global variables - inp_clk, pci_clk,
- vco_clk, pev_clk, flb_clk, and bExtUart
-
-- arch/powerpc/lib/board.c added CONFIG_MPC8220 support
-
-- net/eth.c added FEC support for MPC8220
-
-Added files:
-============
-- board/alaska directory for Alaska MPC8220
-- board/alaska/alaska.c Alaska dram and BATs setup
-- board/alaska/extserial.c external serial (debug card serial) support
-- board/alaska/flash.c Socket (AMD) and Onboard (INTEL) flash support
-- board/alaska/serial.c to determine which int/ext serial to use
-- board/alaska/Makefile Makefile
-- board/alaska/config.mk config make
-- board/alaska/u-boot.lds Linker description
-
-- arch/powerpc/cpu/mpc8220/dma.h multi-channel dma header file
-- arch/powerpc/cpu/mpc8220/dramSetup.h dram setup header file
-- arch/powerpc/cpu/mpc8220/fec.h MPC8220 FEC header file
-- arch/powerpc/cpu/mpc8220/cpu.c cpu specific code
-- arch/powerpc/cpu/mpc8220/cpu_init.c Flexbus ChipSelect and Mux pins setup
-- arch/powerpc/cpu/mpc8220/dramSetup.c MPC8220 DDR SDRAM setup
-- arch/powerpc/cpu/mpc8220/fec.c MPC8220 FEC driver
-- arch/powerpc/cpu/mpc8220/i2c.c MPC8220 I2C driver
-- arch/powerpc/cpu/mpc8220/interrupts.c interrupt support (not enable)
-- arch/powerpc/cpu/mpc8220/loadtask.c load dma
-- arch/powerpc/cpu/mpc8220/speed.c system, pci, flexbus, pev, and cpu clock
-- arch/powerpc/cpu/mpc8220/traps.c exception
-- arch/powerpc/cpu/mpc8220/uart.c MPC8220 UART driver
-- arch/powerpc/cpu/mpc8220/Makefile Makefile
-- arch/powerpc/cpu/mpc8220/config.mk config make
-- arch/powerpc/cpu/mpc8220/fec_dma_task.S MPC8220 FEC multi-channel dma program
-- arch/powerpc/cpu/mpc8220/io.S io functions
-- arch/powerpc/cpu/mpc8220/start.S start up
-
-- include/mpc8220.h
-
-- include/asm-ppc/immap_8220.h
-
-- include/configs/Alaska8220.h
-
-
-1. SWITCH SETTINGS
-==================
-1.1 SW1: 0 - Boot from Socket Flash (AMD) or 1 - Onboard Flash (INTEL)
- SW2: 0 - Select MPC8220 UART or 1 - Debug Card UART
- SW3: unsed
- SW4: 0 - 1284 or 1 - FEC1
- SW5: 0 - PEV or 1 - FEC2
-
-
-2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
-===========================================
-2.1. For the initial bringup, we adopted a consistent memory scheme between u-boot and
- linux kernel, you can customize it based on your system requirements:
- DDR: 0x00000000-0x1fffffff (max 512MB)
- MBAR: 0xf0000000-0xf0027fff (128KB)
- CPLD: 0xf1000000-0xf103ffff (256KB)
- FPGA: 0xf2000000-0xf203ffff (256KB)
- Flash: 0xfe000000-0xffffffff (max 32MB)
-
-3. DEFINITIONS AND COMPILATION
-==============================
-3.1 Explanation on NEW definitions in include/configs/alaska8220.h
- CONFIG_MPC8220 MPC8220 specific
- CONFIG_ALASKA8220 Alaska board specific
- CONFIG_SYS_MPC8220_CLKIN Define Alaska Input Clock
- CONFIG_PSC_CONSOLE Enable MPC8220 UART
- CONFIG_EXTUART_CONSOLE Enable External 16552 UART
- CONFIG_SYS_AMD_BOOT To determine the u-boot is booted from AMD or Intel
- CONFIG_SYS_MBAR MBAR base address
- CONFIG_SYS_DEFAULT_MBAR Reset MBAR base address
-
-3.2 Compilation
- export CROSS_COMPILE=cross-compile-prefix
- cd u-boot-1-1-x
- make distclean
- make Alaska8220_config
- make
-
-
-4. SCREEN DUMP
-==============
-4.1 Alaska MPC8220 board
- Boot from AMD (NOTE: May not show exactly the same)
-
-U-Boot 1.1.1 (Sep 22 2004 - 22:14:41)
-
-CPU: MPC8220 (JTAG ID 1640301d) at 300 MHz
- Bus 120 MHz, CPU 300 MHz, PCI 30 MHz, VCO 480 MHz
-Board: Alaska MPC8220 Evaluation Board
-I2C: 93 kHz, ready
-DRAM: 256 MB
-Reserving 167k for U-Boot at: 0ffd6000
-FLASH: 16.5 MB
-*** Warning - bad CRC, using default environment
-
-In: serial
-Out: serial
-Err: serial
-Net: FEC ETHERNET
-=> flinfo
-
-Bank # 1: INTEL 28F128J3A
- Size: 8 MB in 64 Sectors
- Sector Start Addresses:
- FE000000 FE020000 FE040000 FE060000 FE080000
- FE0A0000 FE0C0000 FE0E0000 FE100000 FE120000
- FE140000 FE160000 FE180000 FE1A0000 FE1C0000
- FE1E0000 FE200000 FE220000 FE240000 FE260000
- FE280000 FE2A0000 FE2C0000 FE2E0000 FE300000
- FE320000 FE340000 FE360000 FE380000 FE3A0000
- FE3C0000 FE3E0000 FE400000 FE420000 FE440000
- FE460000 FE480000 FE4A0000 FE4C0000 FE4E0000
- FE500000 FE520000 FE540000 FE560000 FE580000
- FE5A0000 FE5C0000 FE5E0000 FE600000 FE620000
- FE640000 FE660000 FE680000 FE6A0000 FE6C0000
- FE6E0000 FE700000 FE720000 FE740000 FE760000
- FE780000 FE7A0000 FE7C0000 FE7E0000
-
-Bank # 2: INTEL 28F128J3A
- Size: 8 MB in 64 Sectors
- Sector Start Addresses:
- FE800000 FE820000 FE840000 FE860000 FE880000
- FE8A0000 FE8C0000 FE8E0000 FE900000 FE920000
- FE940000 FE960000 FE980000 FE9A0000 FE9C0000
- FE9E0000 FEA00000 FEA20000 FEA40000 FEA60000
- FEA80000 FEAA0000 FEAC0000 FEAE0000 FEB00000
- FEB20000 FEB40000 FEB60000 FEB80000 FEBA0000
- FEBC0000 FEBE0000 FEC00000 FEC20000 FEC40000
- FEC60000 FEC80000 FECA0000 FECC0000 FECE0000
- FED00000 FED20000 FED40000 FED60000 FED80000
- FEDA0000 FEDC0000 FEDE0000 FEE00000 FEE20000
- FEE40000 FEE60000 FEE80000 FEEA0000 FEEC0000
- FEEE0000 FEF00000 (RO) FEF20000 (RO) FEF40000 FEF60000
- FEF80000 FEFA0000 FEFC0000 FEFE0000 (RO)
-
-Bank # 3: AMD AMD29F040B
- Size: 0 MB in 7 Sectors
- Sector Start Addresses:
- FFF00000 (RO) FFF10000 (RO) FFF20000 (RO) FFF30000 FFF40000
- FFF50000 FFF60000
-
-Bank # 4: AMD AMD29F040B
- Size: 0 MB in 1 Sectors
- Sector Start Addresses:
- FFF70000 (RO)
-=> bdinfo
-
-memstart = 0xF0009800
-memsize = 0x10000000
-flashstart = 0xFFF00000
-flashsize = 0x01080000
-flashoffset = 0x00025000
-sramstart = 0xF0020000
-sramsize = 0x00008000
-bootflags = 0x00000001
-intfreq = 300 MHz
-busfreq = 120 MHz
-inpfreq = 30 MHz
-flbfreq = 30 MHz
-pcifreq = 30 MHz
-vcofreq = 480 MHz
-pevfreq = 81 MHz
-ethaddr = 00:E0:0C:BC:E0:60
-eth1addr = 00:E0:0C:BC:E0:61
-IP addr = 192.162.1.2
-baudrate = 115200 bps
-=> printenv
-bootargs=root=/dev/ram rw
-bootdelay=5
-baudrate=115200
-ethaddr=00:e0:0c:bc:e0:60
-eth1addr=00:e0:0c:bc:e0:61
-ipaddr=192.162.1.2
-serverip=192.162.1.1
-gatewayip=192.162.1.1
-netmask=255.255.255.0
-hostname=Alaska
-stdin=serial
-stdout=serial
-stderr=serial
-ethact=FEC ETHERNET
-
-Environment size: 268/65532 bytes
-=> setenv ipaddr 192.160.1.2
-=> setenv serverip 192.160.1.1
-=> setenv gatewayip 192.160.1.1
-=> saveenv
-Saving Environment to Flash...
-
-.
-Un-Protected 1 sectors
-Erasing Flash...
-Erasing sector 0 ... done
-Erased 1 sectors
-Writing to Flash... done
-
-.
-Protected 1 sectors
-=> tftp 0x10000 linux.elf
-Using FEC ETHERNET device
-TFTP from server 192.160.1.1; our IP address is 192.160.1.2; sending through gateway 192.160.1.1
-Filename 'linux.elf'.
-Load address: 0x10000
-Loading: invalid RARP header
-#################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- ##################################################
-done
-Bytes transferred = 2917494 (2c8476 hex)
-=> bootelf
-Loading .text @ 0x00a00000 (23820 bytes)
-Loading .data @ 0x00a06000 (2752512 bytes)
-Clearing .bss @ 0x00ca6000 (12764 bytes)
-## Starting application at 0x00a00000 ...
-
-Collect some entropy from RAM........done
-loaded at: 00A00000 00CA91DC
-zimage at: 00A06A93 00AD7756
-initrd at: 00AD8000 00CA5565
-avail ram: 00CAA000 014AA000
-
-Linux/PPC load: ip=off console=ttyS0,115200
-Uncompressing Linux...done.
-Now booting the kernel
-Total memory in system: 256 MB
-Memory BAT mapping: BAT2=256Mb, BAT3=0Mb, residual: 0Mb
-Linux version 2.4.21-rc1 (r61688@bluesocks.sps.mot.com) (gcc version 3.3.1) #17 Wed Sep 8 11:49:16 CDT 2004
-Motorola Alaska port (C) 2003 Motorola, Inc.
-CPLD rev 3
-CPLD switches 0x1b
-Set Pin Mux for FEC1
-Set Pin Mux for FEC2
-Alaska Pin Multiplexing:
-Port Configuration Register 0 = 0
-Port Configuration Register 1 = 0
-Port Configuration Register 2 = 0
-Port Configuration Register 3 = 50000000
-Port Configuration Register 3 - PCI = 51400180
-Setup Alaska FPGA PIC:
-Interrupt Enable Register *(u32) = 0
-Interrupt Status Register = 2f0000
-Interrupt Enable Register in_be32 = 0
-Interrupt Status Register = 2f0000
-Interrupt Enable Register in_le32 = 0
-Interrupt Status Register = 2f00
-Interrupt Enable Register readl = 0
-Interrupt Status Register = 2f00
-Interrupt Enable Register = 0
-Interrupt Status Register = 2f0000
-Setup Alaska PCI Controller:
-On node 0 totalpages: 65536
-zone(0): 65536 pages.
-zone(1): 0 pages.
-zone(2): 0 pages.
-Kernel command line: ip=off console=ttyS0,115200
-Using XLB clock (120.00 MHz) to set up decrementer
-Calibrating delay loop... 199.88 BogoMIPS
-Memory: 254792k available (1476k kernel code, 708k data, 228k init, 0k highmem)
-Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
-Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
-Mount cache hash table entries: 512 (order: 0, 4096 bytes)
-Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
-Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
-POSIX conformance testing by UNIFIX
-PCI: Probing PCI hardware
-PCI: (pcibios_init) Global-Hose = 0xc029d000
-Scanning bus 00
-Fixups for bus 00
-Bus scan for 00 returning with max=00
-PCI: (pcibios_init) finished pci_scan_bus(hose->first_busno = 0, hose->ops = c01a1a74, hose = c029d000)
-PCI: (pcibios_init) PCI Bus Count = 0 =?= Next Bus# = 1
-PCI: (pcibios_init@pci_fixup_irqs) finished machine dependent PCI interrupt routing!
-PCI: bridge rsrc 81000000..81ffffff (100), parent c01a7f88
-PCI: bridge rsrc 84000000..87ffffff (200), parent c01a7fa4
-PCI: (pcibios_init) finished allocating and assigning resources!
-initDma!
-Using 90 DMA buffer descriptors
-descUsed f0023600, descriptors f002360c freeSram f0024140
-unmask SDMA tasks: 0xf0008018 = 0x6f000000
-Linux NET4.0 for Linux 2.4
-Based upon Swansea University Computer Society NET3.039
-Initializing RT netlink socket
-Starting kswapd
-Journalled Block Device driver loaded
-JFFS version 1.0, (C) 1999, 2000 Axis Communications AB
-JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
-pty: 256 Unix98 ptys configured
-tracek: Copyright (C) Motorola, 2003.
-Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
-ttyS00 at 0xf1001008 (irq = 73) is a ST16650
-ttyS01 at 0xf1001010 (irq = 74) is a ST16650
-elp-fpanel: Copyright (C) Motorola, 2003.
-fpanel: fpanelWait timeout
-elp-engine: Copyright (C) Motorola, 2003.
-Video disabled due to configuration switch 4
-Alpine 1284 driver: Copyright (C) Motorola, 2003.
-1284 disabled due to configuration switch 5
-Alpine USB driver: Copyright (C) Motorola, 2003.
-OK
-USB: Descriptor download completed OK
-enable_irq(41) unbalanced
-enable_irq(75) unbalanced
-elp-dmaram: Copyright (C) Motorola, 2003.
-Total memory in system: 256 MB
-elp_dmaram: offset is 0x10000000, size is 0
-Xicor NVRAM driver: Copyright (C) Motorola, 2003.
-elp-video: Copyright (C) Motorola, 2003.
-Video disabled due to configuration switch 4
-elp-pfm: Copyright (C) Motorola, 2003.
-paddle: Copyright (C) Motorola, 2001, present.
-RAMDISK driver initialized: 16 RAM disks of 12288K size 1024 blocksize
-loop: loaded (max 8 devices)
-PPP generic driver version 2.4.2
-PPP Deflate Compression module registered
-Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
-ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
-init_alaska_mtd: chip probing count 0
-cfi_cmdset_0001: Erase suspend on write enabled
-Using buffer write method
-init_alaska_mtd: bank1, name:ALASKA0, size:16777216bytes
-ALASKA flash0: Using Static image partition definition
-Creating 3 MTD partitions on "ALASKA0":
-0x00000000-0x00280000 : "kernel"
-0x00280000-0x00fe0000 : "user"
-0x00fe0000-0x01000000 : "signature"
-mgt_fec_module_init
-mgt_fec_init()
-mgt_fec_init
-mgt_init_fec_dev(0xc05f6000,0)
-dev c05f6000 fec_priv c05f6160 fec f0009000
-mgt_init_fec_dev(0xc05f6800,1)
-dev c05f6800 fec_priv c05f6960 fec f0009800
-NET4: Linux TCP/IP 1.0 for NET4.0
-IP Protocols: ICMP, UDP, TCP, IGMP
-IP: routing cache hash table of 2048 buckets, 16Kbytes
-TCP: Hash tables configured (established 16384 bind 32768)
-NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
-RAMDISK: Compressed image found at block 0
-Freeing initrd memory: 1845k freed
-JFFS: Trying to mount a non-mtd device.
-VFS: Mounted root (romfs filesystem) readonly.
-Freeing unused kernel memory: 228k init
-INIT: version 2.78 booting
-INIT: Entering runlevel: 1
-"Space, a great big place of unknown stuff." -Dexter, for our MotD.
-[01/Jan/1970:00:00:01 +0000] boa: server version Boa/0.94.8.3
-[01/Jan/1970:00:00:01 +0000] boa: server built Sep 7 2004 at 17:40:55.
-[01/Jan/1970:00:00:01 +0000] boa: starting server pid=28, port 80
-Mounting flash filesystem, will take a minute...
-/etc/rc: line 30: /dev/lp0: No such devish-2.05b#
-sh-2.05b# ifup eth0
-client (v0.9.9-pre) started
-adapter index 2
-adapter hardware address 00:e0:0c:bc:e0:60
-execle'ing /usr/share/udhcpc/default.script
-/sbin/ifconfig eth0
-eth0 Link encap:Ethernet HWaddr 00:E0:0C:BC:E0:60
- BROADCAST MULTICAST MTU:1500 Metric:1
- mgt_fec_open
- Rfec request irq
-X fec_open: rcv_ring_size 8, xmt_ring_size 8
-packmgt_fec_open(): call netif_start_queue()
-ets:0 errors:0 dropped:0 overruns:0 frame:0
- TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:100
- RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
- Base address:0x9000
-
-/sbin/ifconfig eth0 up
-entering raw listen mode
-Opening raw socket on ifindex 2
-adding option 0x35
-adding option 0x3d
-adding option 0x3c
-Sending discover...
-Waiting on select...
-unrelated/bogus packet
-Waiting on select...
-oooooh!!! got some!
-adding option 0x35
-adding option 0x3d
-adding option 0x3c
-adding option 0x32
-adding option 0x36
-Sending select for 163.12.48.146...
-Waiting on select...
-oooooh!!! got some!
-Waiting on select...
-oooooh!!! got some!
-Lease of 163.12.48.146 obtained, lease time 345600
-execle'ing /usr/share/udhcpc/default.script
-/sbin/ifconfig eth0 163.12.48.146 netmask 255.255.254.0
-/sbin/ifconfig eth0 up
-deleting routers
-/sbin/route del default
-/sbin/route add default gw 163.12.49.254 dev eth0
-adding dns 163.12.252.230
-adding dns 192.55.22.4
-adding dns 192.5.249.4
-entering none listen mode
-sh-2.05b#
-
-5. REPROGRAM U-BOOT
-===================
-5.1 Reprogram u-boot (boot from AMD)
- 1. Unprotect the boot sector
- => protect off bank 3
- 2. Download new u-boot binary file
- => tftp 0x10000 u-boot.bin
- 3. Erase bootsector (max 7 sectors)
- => erase 0xfff00000 0xfff6ffff
- 4. Program the u-boot to flash
- => cp.b 0x10000 0xfff00000
- 5. Reset for the new u-boot to take place
- => reset
-
-5.2 Reprogram u-boot (boot from AMD program at INTEL)
- 1. Unprotect the boot sector
- => protect off bank 2
- 2. Download new u-boot binary file
- => tftp 0x10000 u-boot.bin
- 3. Erase bootsector (max 7 sectors)
- => erase 0xfef00000 0xfefdffff
- 4. Program the u-boot to flash
- => cp.b 0x10000 0xfef00000
- 5. Reset for the new u-boot to take place
- => reset
-
-5.3 Reprogram u-boot (boot from INTEL)
- 1. Unprotect the boot sector
- => protect off bank 4
- 2. Download new u-boot binary file
- => tftp 0x10000 u-boot.bin
- 3. Erase bootsector (max 7 sectors)
- => erase 0xfff00000 0xfffdffff
- 4. Program the u-boot to flash
- => cp.b 0x10000 0xfff00000
- 5. Reset for the new u-boot to take place
- => reset
-
-5.4 Reprogram u-boot (boot from INTEL program at AMD)
- 1. Unprotect the boot sector
- => protect off bank 1
- 2. Download new u-boot binary file
- => tftp 0x10000 u-boot.bin
- 3. Erase bootsector (max 7 sectors)
- => erase 0xfe080000 0xfe0effff
- 4. Program the u-boot to flash
- => cp.b 0x10000 0xfe080000
- 5. Reset for the new u-boot to take place
- => reset
diff --git a/board/alaska/alaska.c b/board/alaska/alaska.c
deleted file mode 100644
index 89c1abd..0000000
--- a/board/alaska/alaska.c
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * (C) Copyright 2004, Freescale Inc.
- * TsiChung Liew, Tsi-Chung.Liew@freescale.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8220.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-
-void setupBat (ulong size)
-{
- ulong batu, batl;
- int blocksize = 0;
-
- /* Flash 0 */
-#if defined (CONFIG_SYS_AMD_BOOT)
- batu = CONFIG_SYS_FLASH0_BASE | BATU_BL_512K | BPP_RW | BPP_RX;
-#else
- batu = CONFIG_SYS_FLASH0_BASE | BATU_BL_16M | BPP_RW | BPP_RX;
-#endif
- batl = CONFIG_SYS_FLASH0_BASE | 0x22;
- write_bat (IBAT0, batu, batl);
- write_bat (DBAT0, batu, batl);
-
- /* Flash 1 */
-#if defined (CONFIG_SYS_AMD_BOOT)
- batu = CONFIG_SYS_FLASH1_BASE | BATU_BL_16M | BPP_RW | BPP_RX;
-#else
- batu = CONFIG_SYS_FLASH1_BASE | BATU_BL_512K | BPP_RW | BPP_RX;
-#endif
- batl = CONFIG_SYS_FLASH1_BASE | 0x22;
- write_bat (IBAT1, batu, batl);
- write_bat (DBAT1, batu, batl);
-
- /* CPLD */
- batu = CONFIG_SYS_CPLD_BASE | BATU_BL_512K | BPP_RW | BPP_RX;
- batl = CONFIG_SYS_CPLD_BASE | 0x22;
- write_bat (IBAT2, 0, 0);
- write_bat (DBAT2, batu, batl);
-
- /* FPGA */
- batu = CONFIG_SYS_FPGA_BASE | BATU_BL_512K | BPP_RW | BPP_RX;
- batl = CONFIG_SYS_FPGA_BASE | 0x22;
- write_bat (IBAT3, 0, 0);
- write_bat (DBAT3, batu, batl);
-
- /* MBAR - Data only */
- batu = CONFIG_SYS_MBAR | BPP_RW | BPP_RX;
- batl = CONFIG_SYS_MBAR | 0x22;
- mtspr (IBAT4L, 0);
- mtspr (IBAT4U, 0);
- mtspr (DBAT4L, batl);
- mtspr (DBAT4U, batu);
-
- /* MBAR - SRAM */
- batu = CONFIG_SYS_SRAM_BASE | BPP_RW | BPP_RX;
- batl = CONFIG_SYS_SRAM_BASE | 0x42;
- mtspr (IBAT5L, batl);
- mtspr (IBAT5U, batu);
- mtspr (DBAT5L, batl);
- mtspr (DBAT5U, batu);
-
- if (size <= 0x800000) /* 8MB */
- blocksize = BATU_BL_8M;
- else if (size <= 0x1000000) /* 16MB */
- blocksize = BATU_BL_16M;
- else if (size <= 0x2000000) /* 32MB */
- blocksize = BATU_BL_32M;
- else if (size <= 0x4000000) /* 64MB */
- blocksize = BATU_BL_64M;
- else if (size <= 0x8000000) /* 128MB */
- blocksize = BATU_BL_128M;
- else if (size <= 0x10000000) /* 256MB */
- blocksize = BATU_BL_256M;
-
- /* Memory */
- batu = CONFIG_SYS_SDRAM_BASE | blocksize | BPP_RW | BPP_RX;
- batl = CONFIG_SYS_SDRAM_BASE | 0x42;
- mtspr (IBAT6L, batl);
- mtspr (IBAT6U, batu);
- mtspr (DBAT6L, batl);
- mtspr (DBAT6U, batu);
-
- /* memory size is less than 256MB */
- if (size <= 0x10000000) {
- /* Nothing */
- batu = 0;
- batl = 0;
- } else {
- size -= 0x10000000;
- if (size <= 0x800000) /* 8MB */
- blocksize = BATU_BL_8M;
- else if (size <= 0x1000000) /* 16MB */
- blocksize = BATU_BL_16M;
- else if (size <= 0x2000000) /* 32MB */
- blocksize = BATU_BL_32M;
- else if (size <= 0x4000000) /* 64MB */
- blocksize = BATU_BL_64M;
- else if (size <= 0x8000000) /* 128MB */
- blocksize = BATU_BL_128M;
- else if (size <= 0x10000000) /* 256MB */
- blocksize = BATU_BL_256M;
-
- batu = (CONFIG_SYS_SDRAM_BASE +
- 0x10000000) | blocksize | BPP_RW | BPP_RX;
- batl = (CONFIG_SYS_SDRAM_BASE + 0x10000000) | 0x42;
- }
-
- mtspr (IBAT7L, batl);
- mtspr (IBAT7U, batu);
- mtspr (DBAT7L, batl);
- mtspr (DBAT7U, batu);
-}
-
-phys_size_t initdram (int board_type)
-{
- ulong size;
-
- size = dramSetup ();
-
-/* if iCache ad dCache is defined */
-#if defined(CONFIG_CMD_CACHE)
-/* setupBat(size);*/
-#endif
-
- return size;
-}
-
-int checkboard (void)
-{
- puts ("Board: Alaska MPC8220 Evaluation Board\n");
-
- return 0;
-}
diff --git a/board/alaska/flash.c b/board/alaska/flash.c
deleted file mode 100644
index 977822a..0000000
--- a/board/alaska/flash.c
+++ /dev/null
@@ -1,945 +0,0 @@
-/*
- * (C) Copyright 2001
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2001-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <linux/byteorder/swab.h>
-
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-/* Board support for 1 or 2 flash devices */
-#define FLASH_PORT_WIDTH8
-
-typedef unsigned char FLASH_PORT_WIDTH;
-typedef volatile unsigned char FLASH_PORT_WIDTHV;
-
-#define SWAP(x) (x)
-
-/* Intel-compatible flash ID */
-#define INTEL_COMPAT 0x89
-#define INTEL_ALT 0xB0
-
-/* Intel-compatible flash commands */
-#define INTEL_PROGRAM 0x10
-#define INTEL_ERASE 0x20
-#define INTEL_CLEAR 0x50
-#define INTEL_LOCKBIT 0x60
-#define INTEL_PROTECT 0x01
-#define INTEL_STATUS 0x70
-#define INTEL_READID 0x90
-#define INTEL_CONFIRM 0xD0
-#define INTEL_RESET 0xFF
-
-/* Intel-compatible flash status bits */
-#define INTEL_FINISHED 0x80
-#define INTEL_OK 0x80
-
-#define FPW FLASH_PORT_WIDTH
-#define FPWV FLASH_PORT_WIDTHV
-
-#define FLASH_CYCLE1 0x0555
-#define FLASH_CYCLE2 0x02aa
-
-#define WR_BLOCK 0x20
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (FPW * addr, flash_info_t * info);
-static int write_data (flash_info_t * info, ulong dest, FPW data);
-static int write_data_block (flash_info_t * info, ulong src, ulong dest);
-static int write_word_amd (flash_info_t * info, FPWV * dest, FPW data);
-static void flash_get_offsets (ulong base, flash_info_t * info);
-void inline spin_wheel (void);
-static void flash_sync_real_protect (flash_info_t * info);
-static unsigned char intel_sector_protected (flash_info_t *info, ushort sector);
-static unsigned char same_chip_banks (int bank1, int bank2);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
- int i;
- ulong size = 0;
- ulong fsize = 0;
-
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
- memset (&flash_info[i], 0, sizeof (flash_info_t));
-
- switch (i) {
- case 0:
- flash_get_size ((FPW *) CONFIG_SYS_FLASH1_BASE,
- &flash_info[i]);
- flash_get_offsets (CONFIG_SYS_FLASH1_BASE, &flash_info[i]);
- break;
- case 1:
- flash_get_size ((FPW *) CONFIG_SYS_FLASH1_BASE,
- &flash_info[i]);
- fsize = CONFIG_SYS_FLASH1_BASE + flash_info[i - 1].size;
- flash_get_offsets (fsize, &flash_info[i]);
- break;
- case 2:
- flash_get_size ((FPW *) CONFIG_SYS_FLASH0_BASE,
- &flash_info[i]);
- flash_get_offsets (CONFIG_SYS_FLASH0_BASE, &flash_info[i]);
- break;
- case 3:
- flash_get_size ((FPW *) CONFIG_SYS_FLASH0_BASE,
- &flash_info[i]);
- fsize = CONFIG_SYS_FLASH0_BASE + flash_info[i - 1].size;
- flash_get_offsets (fsize, &flash_info[i]);
- break;
- default:
- panic ("configured to many flash banks!\n");
- break;
- }
- size += flash_info[i].size;
-
- /* get the h/w and s/w protection status in sync */
- flash_sync_real_protect(&flash_info[i]);
- }
-
- /* Protect monitor and environment sectors
- */
-#if defined (CONFIG_SYS_AMD_BOOT)
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
- &flash_info[2]);
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_SYS_INTEL_BASE,
- CONFIG_SYS_INTEL_BASE + monitor_flash_len - 1,
- &flash_info[1]);
-#else
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
- &flash_info[3]);
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_SYS_AMD_BASE,
- CONFIG_SYS_AMD_BASE + monitor_flash_len - 1, &flash_info[0]);
-#endif
-
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_ENV1_ADDR,
- CONFIG_ENV1_ADDR + CONFIG_ENV1_SIZE - 1, &flash_info[1]);
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[3]);
-
- return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t * info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN)
- return;
-
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD) {
- for (i = 0; i < info->sector_count; i++) {
- info->start[i] = base + (i * PHYS_AMD_SECT_SIZE);
- info->protect[i] = 0;
- }
- }
-
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
- for (i = 0; i < info->sector_count; i++) {
- info->start[i] = base + (i * PHYS_INTEL_SECT_SIZE);
- }
- }
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_INTEL:
- printf ("INTEL ");
- break;
- case FLASH_MAN_AMD:
- printf ("AMD ");
- break;
- default:
- printf ("Unknown Vendor ");
- break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_28F128J3A:
- printf ("28F128J3A\n");
- break;
-
- case FLASH_AM040:
- printf ("AMD29F040B\n");
- break;
-
- default:
- printf ("Unknown Chip Type\n");
- break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; ++i) {
- if ((i % 5) == 0)
- printf ("\n ");
- printf (" %08lX%s",
- info->start[i], info->protect[i] ? " (RO)" : " ");
- }
- printf ("\n");
- return;
-}
-
-/*
- * The following code cannot be run from FLASH!
- */
-static ulong flash_get_size (FPW * addr, flash_info_t * info)
-{
- FPWV value;
- static int amd = 0;
-
- /* Write auto select command: read Manufacturer ID */
- /* Write auto select command sequence and test FLASH answer */
- addr[FLASH_CYCLE1] = (FPW) 0x00AA00AA; /* for AMD, Intel ignores this */
- __asm__ ("sync");
- addr[FLASH_CYCLE2] = (FPW) 0x00550055; /* for AMD, Intel ignores this */
- __asm__ ("sync");
- addr[FLASH_CYCLE1] = (FPW) 0x00900090; /* selects Intel or AMD */
- __asm__ ("sync");
-
- udelay (100);
-
- switch (addr[0] & 0xff) {
-
- case (uchar) AMD_MANUFACT:
- info->flash_id = FLASH_MAN_AMD;
- value = addr[1];
- break;
-
- case (uchar) INTEL_MANUFACT:
- info->flash_id = FLASH_MAN_INTEL;
- value = addr[2];
- break;
-
- default:
- printf ("unknown\n");
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
- return (0); /* no or unknown flash */
- }
-
- switch (value) {
-
- case (FPW) INTEL_ID_28F128J3A:
- info->flash_id += FLASH_28F128J3A;
- info->sector_count = 64;
- info->size = 0x00800000; /* => 16 MB */
- break;
-
- case (FPW) AMD_ID_LV040B:
- info->flash_id += FLASH_AM040;
- if (amd == 0) {
- info->sector_count = 7;
- info->size = 0x00070000; /* => 448 KB */
- amd = 1;
- } else {
- /* for Environment settings */
- info->sector_count = 1;
- info->size = PHYS_AMD_SECT_SIZE; /* => 64 KB */
- amd = 0;
- }
- break;
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- break;
- }
-
- if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
- printf ("** ERROR: sector count %d > max (%d) **\n",
- info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
- info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
- }
-
- if (value == (FPW) INTEL_ID_28F128J3A)
- addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
- else
- addr[0] = (FPW) 0x00F000F0; /* restore read mode */
-
- return (info->size);
-}
-
-
-/*
- * This function gets the u-boot flash sector protection status
- * (flash_info_t.protect[]) in sync with the sector protection
- * status stored in hardware.
- */
-static void flash_sync_real_protect (flash_info_t * info)
-{
- int i;
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_28F128J3A:
- for (i = 0; i < info->sector_count; ++i) {
- info->protect[i] = intel_sector_protected(info, i);
- }
- break;
- case FLASH_AM040:
- default:
- /* no h/w protect support */
- break;
- }
-}
-
-
-/*
- * checks if "sector" in bank "info" is protected. Should work on intel
- * strata flash chips 28FxxxJ3x in 8-bit mode.
- * Returns 1 if sector is protected (or timed-out while trying to read
- * protection status), 0 if it is not.
- */
-static unsigned char intel_sector_protected (flash_info_t *info, ushort sector)
-{
- FPWV *addr;
- FPWV *lock_conf_addr;
- ulong start;
- unsigned char ret;
-
- /*
- * first, wait for the WSM to be finished. The rationale for
- * waiting for the WSM to become idle for at most
- * CONFIG_SYS_FLASH_ERASE_TOUT is as follows. The WSM can be busy
- * because of: (1) erase, (2) program or (3) lock bit
- * configuration. So we just wait for the longest timeout of
- * the (1)-(3), i.e. the erase timeout.
- */
-
- /* wait at least 35ns (W12) before issuing Read Status Register */
- udelay(1);
- addr = (FPWV *) info->start[sector];
- *addr = (FPW) INTEL_STATUS;
-
- start = get_timer (0);
- while ((*addr & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) {
- if (get_timer (start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- *addr = (FPW) INTEL_RESET; /* restore read mode */
- printf("WSM busy too long, can't get prot status\n");
- return 1;
- }
- }
-
- /* issue the Read Identifier Codes command */
- *addr = (FPW) INTEL_READID;
-
- /* wait at least 35ns (W12) before reading */
- udelay(1);
-
- /* Intel example code uses offset of 4 for 8-bit flash */
- lock_conf_addr = (FPWV *) info->start[sector] + 4;
- ret = (*lock_conf_addr & (FPW) INTEL_PROTECT) ? 1 : 0;
-
- /* put flash back in read mode */
- *addr = (FPW) INTEL_RESET;
-
- return ret;
-}
-
-
-/*
- * Checks if "bank1" and "bank2" are on the same chip. Returns 1 if they
- * are and 0 otherwise.
- */
-static unsigned char same_chip_banks (int bank1, int bank2)
-{
- unsigned char same_chip[CONFIG_SYS_MAX_FLASH_BANKS][CONFIG_SYS_MAX_FLASH_BANKS] = {
- {1, 1, 0, 0},
- {1, 1, 0, 0},
- {0, 0, 1, 1},
- {0, 0, 1, 1}
- };
- return same_chip[bank1][bank2];
-}
-
-
-/*-----------------------------------------------------------------------
- */
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
- int flag, prot, sect;
- ulong type, start;
- int rcode = 0, intel = 0;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN)
- printf ("- missing\n");
- else
- printf ("- no sectors to erase\n");
- return 1;
- }
-
- type = (info->flash_id & FLASH_VENDMASK);
- if ((type != FLASH_MAN_INTEL)) {
- type = (info->flash_id & FLASH_VENDMASK);
- if ((type != FLASH_MAN_AMD)) {
- printf ("Can't erase unknown flash type %08lx - aborted\n",
- info->flash_id);
- return 1;
- }
- }
-
- if (type == FLASH_MAN_INTEL)
- intel = 1;
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n", prot);
- } else {
- printf ("\n");
- }
-
- start = get_timer (0);
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts ();
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- FPWV *addr = (FPWV *) (info->start[sect]);
- FPW status;
-
- printf ("Erasing sector %2d ... ", sect);
-
- /* arm simple, non interrupt dependent timer */
- start = get_timer (0);
-
- if (intel) {
- *addr = (FPW) 0x00500050; /* clear status register */
- *addr = (FPW) 0x00200020; /* erase setup */
- *addr = (FPW) 0x00D000D0; /* erase confirm */
- } else {
- FPWV *base; /* first address in bank */
-
- base = (FPWV *) (CONFIG_SYS_AMD_BASE);
- base[FLASH_CYCLE1] = (FPW) 0x00AA00AA; /* unlock */
- base[FLASH_CYCLE2] = (FPW) 0x00550055; /* unlock */
- base[FLASH_CYCLE1] = (FPW) 0x00800080; /* erase mode */
- base[FLASH_CYCLE1] = (FPW) 0x00AA00AA; /* unlock */
- base[FLASH_CYCLE2] = (FPW) 0x00550055; /* unlock */
- *addr = (FPW) 0x00300030; /* erase sector */
- }
-
- while (((status =
- *addr) & (FPW) 0x00800080) !=
- (FPW) 0x00800080) {
- if (get_timer (start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- if (intel) {
- *addr = (FPW) 0x00B000B0; /* suspend erase */
- *addr = (FPW) 0x00FF00FF; /* reset to read mode */
- } else
- *addr = (FPW) 0x00F000F0; /* reset to read mode */
-
- rcode = 1;
- break;
- }
- }
-
- if (intel) {
- *addr = (FPW) 0x00500050; /* clear status register cmd. */
- *addr = (FPW) 0x00FF00FF; /* resest to read mode */
- } else
- *addr = (FPW) 0x00F000F0; /* reset to read mode */
-
- printf (" done\n");
- }
- }
- if (flag)
- enable_interrupts();
-
- return rcode;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- * 4 - Flash not identified
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- if (info->flash_id == FLASH_UNKNOWN) {
- return 4;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD:
- {
- FPW data = 0; /* 16 or 32 bit word, matches flash bus width */
- int bytes; /* number of bytes to program in current word */
- int left; /* number of bytes left to program */
- int i, res;
-
- for (left = cnt, res = 0;
- left > 0 && res == 0;
- addr += sizeof (data), left -=
- sizeof (data) - bytes) {
-
- bytes = addr & (sizeof (data) - 1);
- addr &= ~(sizeof (data) - 1);
-
- /* combine source and destination data so can program
- * an entire word of 16 or 32 bits
- */
- for (i = 0; i < sizeof (data); i++) {
- data <<= 8;
- if (i < bytes || i - bytes >= left)
- data += *((uchar *) addr + i);
- else
- data += *src++;
- }
-
- res = write_word_amd (info, (FPWV *) addr,
- data);
- }
- return res;
- } /* case FLASH_MAN_AMD */
-
- case FLASH_MAN_INTEL:
- {
- ulong cp, wp;
- FPW data;
- int count, i, l, rc, port_width;
-
- /* get lower word aligned address */
- wp = addr;
- port_width = 1;
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i = 0, cp = wp; i < l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
-
- for (; i < port_width && cnt > 0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
-
- for (; cnt == 0 && i < port_width; ++i, ++cp)
- data = (data << 8) | (*(uchar *) cp);
-
- if ((rc =
- write_data (info, wp, SWAP (data))) != 0)
- return (rc);
- wp += port_width;
- }
-
- if (cnt > WR_BLOCK) {
- /*
- * handle word aligned part
- */
- count = 0;
- while (cnt >= WR_BLOCK) {
-
- if ((rc =
- write_data_block (info,
- (ulong) src,
- wp)) != 0)
- return (rc);
-
- wp += WR_BLOCK;
- src += WR_BLOCK;
- cnt -= WR_BLOCK;
-
- if (count++ > 0x800) {
- spin_wheel ();
- count = 0;
- }
- }
- }
-
- if (cnt < WR_BLOCK) {
- /*
- * handle word aligned part
- */
- count = 0;
- while (cnt >= port_width) {
- data = 0;
- for (i = 0; i < port_width; ++i)
- data = (data << 8) | *src++;
-
- if ((rc =
- write_data (info, wp,
- SWAP (data))) != 0)
- return (rc);
-
- wp += port_width;
- cnt -= port_width;
- if (count++ > 0x800) {
- spin_wheel ();
- count = 0;
- }
- }
- }
-
- if (cnt == 0)
- return (0);
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i = 0, cp = wp; i < port_width && cnt > 0;
- ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
-
- for (; i < port_width; ++i, ++cp)
- data = (data << 8) | (*(uchar *) cp);
-
- return (write_data (info, wp, SWAP (data)));
- } /* case FLASH_MAN_INTEL */
-
- } /* switch */
- return (0);
-}
-
-/*-----------------------------------------------------------------------
- * Write a word or halfword to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_data (flash_info_t * info, ulong dest, FPW data)
-{
- FPWV *addr = (FPWV *) dest;
- ulong start;
- int flag, rc = 0;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*addr & data) != data) {
- printf ("not erased at %08lx (%lx)\n", (ulong)addr, (ulong)*addr);
- return (2);
- }
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts ();
-
- *addr = (FPW) 0x00400040; /* write setup */
- *addr = data;
-
- /* arm simple, non interrupt dependent timer */
- start = get_timer (0);
-
- /* wait while polling the status register */
- while ((*addr & (FPW) 0x00800080) != (FPW) 0x00800080) {
- if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- rc = 1;
- goto OUT;
- }
- }
-
-OUT:
- *addr = (FPW)0x00FF00FF; /* restore read mode */
-
- if (flag)
- enable_interrupts();
-
- return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Write a word or halfword to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_data_block (flash_info_t * info, ulong src, ulong dest)
-{
- FPWV *srcaddr = (FPWV *) src;
- FPWV *dstaddr = (FPWV *) dest;
- ulong start;
- int flag, i, rc = 0;
-
- /* Check if Flash is (sufficiently) erased */
- for (i = 0; i < WR_BLOCK; i++)
- if ((*dstaddr++ & 0xff) != 0xff) {
- printf ("not erased at %08lx (%lx)\n",
- (ulong)dstaddr, (ulong)*dstaddr);
- return (2);
- }
-
- dstaddr = (FPWV *) dest;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts ();
-
- *dstaddr = (FPW) 0x00e800e8; /* write block setup */
-
- /* arm simple, non interrupt dependent timer */
- start = get_timer (0);
-
- /* wait while polling the status register */
- while ((*dstaddr & (FPW)0x00800080) != (FPW)0x00800080) {
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- rc = 1;
- goto OUT;
- }
- }
-
- *dstaddr = (FPW) 0x001f001f; /* write 32 to buffer */
- for (i = 0; i < WR_BLOCK; i++)
- *dstaddr++ = *srcaddr++;
-
- dstaddr -= 1;
- *dstaddr = (FPW) 0x00d000d0; /* write 32 to buffer */
-
- /* arm simple, non interrupt dependent timer */
- start = get_timer (0);
-
- /* wait while polling the status register */
- while ((*dstaddr & (FPW) 0x00800080) != (FPW) 0x00800080) {
- if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- *dstaddr = (FPW) 0x00FF00FF; /* restore read mode */
- return (1);
- }
- }
-
-OUT:
- *dstaddr = (FPW)0x00FF00FF; /* restore read mode */
- if (flag)
- enable_interrupts();
-
- return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash for AMD FLASH
- * A word is 16 or 32 bits, whichever the bus width of the flash bank
- * (not an individual chip) is.
- *
- * returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word_amd (flash_info_t * info, FPWV * dest, FPW data)
-{
- ulong start;
- int flag;
- int res = 0; /* result, assume success */
- FPWV *base; /* first address in flash bank */
-
- /* Check if Flash is (sufficiently) erased */
- if ((*dest & data) != data) {
- return (2);
- }
-
- base = (FPWV *) (CONFIG_SYS_AMD_BASE);
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts ();
-
- base[FLASH_CYCLE1] = (FPW) 0x00AA00AA; /* unlock */
- base[FLASH_CYCLE2] = (FPW) 0x00550055; /* unlock */
- base[FLASH_CYCLE1] = (FPW) 0x00A000A0; /* selects program mode */
-
- *dest = data; /* start programming the data */
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts ();
-
- start = get_timer (0);
-
- /* data polling for D7 */
- while (res == 0
- && (*dest & (FPW) 0x00800080) != (data & (FPW) 0x00800080)) {
- if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- *dest = (FPW) 0x00F000F0; /* reset bank */
- res = 1;
- }
- }
-
- return (res);
-}
-
-void inline spin_wheel (void)
-{
- static int p = 0;
- static char w[] = "\\/-";
-
- printf ("\010%c", w[p]);
- (++p == 3) ? (p = 0) : 0;
-}
-
-/*-----------------------------------------------------------------------
- * Set/Clear sector's lock bit, returns:
- * 0 - OK
- * 1 - Error (timeout, voltage problems, etc.)
- */
-int flash_real_protect (flash_info_t * info, long sector, int prot)
-{
- ulong start;
- int i, j;
- int curr_bank;
- int bank;
- int rc = 0;
- FPWV *addr = (FPWV *) (info->start[sector]);
- int flag = disable_interrupts ();
-
- /*
- * 29F040B AMD flash does not support software protection/unprotection,
- * the only way to protect the AMD flash is marked it as prot bit.
- * This flash only support hardware protection, by supply or not supply
- * 12vpp to the flash
- */
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD) {
- info->protect[sector] = prot;
-
- return 0;
- }
-
- *addr = INTEL_CLEAR; /* Clear status register */
- if (prot) { /* Set sector lock bit */
- *addr = INTEL_LOCKBIT; /* Sector lock bit */
- *addr = INTEL_PROTECT; /* set */
- } else { /* Clear sector lock bit */
- *addr = INTEL_LOCKBIT; /* All sectors lock bits */
- *addr = INTEL_CONFIRM; /* clear */
- }
-
- start = get_timer (0);
-
- while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) {
- if (get_timer (start) > CONFIG_SYS_FLASH_UNLOCK_TOUT) {
- printf ("Flash lock bit operation timed out\n");
- rc = 1;
- break;
- }
- }
-
- if (*addr != INTEL_OK) {
- printf ("Flash lock bit operation failed at %08X, CSR=%08X\n",
- (uint) addr, (uint) * addr);
- rc = 1;
- }
-
- if (!rc)
- info->protect[sector] = prot;
-
- /*
- * Clear lock bit command clears all sectors lock bits, so
- * we have to restore lock bits of protected sectors.
- */
- if (!prot) {
- /*
- * re-locking must be done for all banks that belong on one
- * FLASH chip, as all the sectors on the chip were unlocked
- * by INTEL_LOCKBIT/INTEL_CONFIRM commands. (let's hope
- * that banks never span chips, in particular chips which
- * support h/w protection differently).
- */
-
- /* find the current bank number */
- curr_bank = CONFIG_SYS_MAX_FLASH_BANKS + 1;
- for (j = 0; j < CONFIG_SYS_MAX_FLASH_BANKS; ++j) {
- if (&flash_info[j] == info) {
- curr_bank = j;
- }
- }
- if (curr_bank == CONFIG_SYS_MAX_FLASH_BANKS + 1) {
- printf("Error: can't determine bank number!\n");
- }
-
- for (bank = 0; bank < CONFIG_SYS_MAX_FLASH_BANKS; ++bank) {
- if (!same_chip_banks(curr_bank, bank)) {
- continue;
- }
- info = &flash_info[bank];
- for (i = 0; i < info->sector_count; i++) {
- if (info->protect[i]) {
- start = get_timer (0);
- addr = (FPWV *) (info->start[i]);
- *addr = INTEL_LOCKBIT; /* Sector lock bit */
- *addr = INTEL_PROTECT; /* set */
- while ((*addr & INTEL_FINISHED) !=
- INTEL_FINISHED) {
- if (get_timer (start) >
- CONFIG_SYS_FLASH_UNLOCK_TOUT) {
- printf ("Flash lock bit operation timed out\n");
- rc = 1;
- break;
- }
- }
- }
- }
- }
-
- /*
- * get the s/w sector protection status in sync with the h/w,
- * in case something went wrong during the re-locking.
- */
- flash_sync_real_protect(info); /* resets flash to read mode */
- }
-
- if (flag)
- enable_interrupts ();
-
- *addr = INTEL_RESET; /* Reset to read array mode */
-
- return rc;
-}
diff --git a/board/armltd/vexpress/Makefile b/board/armltd/vexpress/Makefile
index 8749590..6719f3d 100644
--- a/board/armltd/vexpress/Makefile
+++ b/board/armltd/vexpress/Makefile
@@ -25,7 +25,7 @@
LIB = $(obj)lib$(BOARD).o
-COBJS := ca9x4_ct_vxp.o
+COBJS := vexpress_common.o
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/armltd/vexpress/ca9x4_ct_vxp.c b/board/armltd/vexpress/vexpress_common.c
similarity index 89%
rename from board/armltd/vexpress/ca9x4_ct_vxp.c
rename to board/armltd/vexpress/vexpress_common.c
index d5e109e..2c54869 100644
--- a/board/armltd/vexpress/ca9x4_ct_vxp.c
+++ b/board/armltd/vexpress/vexpress_common.c
@@ -45,8 +45,7 @@
static ulong timestamp;
static ulong lastdec;
-static struct wdt *wdt_base = (struct wdt *)WDT_BASE;
-static struct systimer *systimer_base = (struct systimer *)SYSTIMER_BASE;
+static struct systimer *systimer_base = (struct systimer *)V2M_TIMER01;
static struct sysctrl *sysctrl_base = (struct sysctrl *)SCTL_BASE;
static void flash__init(void);
@@ -166,20 +165,38 @@
*/
writel(SYSTIMER_RELOAD, &systimer_base->timer0load);
writel(SYSTIMER_RELOAD, &systimer_base->timer0value);
- writel(SYSTIMER_EN | SYSTIMER_32BIT | \
- readl(&systimer_base->timer0control), \
+ writel(SYSTIMER_EN | SYSTIMER_32BIT |
+ readl(&systimer_base->timer0control),
&systimer_base->timer0control);
reset_timer_masked();
}
+int v2m_cfg_write(u32 devfn, u32 data)
+{
+ /* Configuration interface broken? */
+ u32 val;
+
+ devfn |= SYS_CFG_START | SYS_CFG_WRITE;
+
+ val = readl(V2M_SYS_CFGSTAT);
+ writel(val & ~SYS_CFG_COMPLETE, V2M_SYS_CFGSTAT);
+
+ writel(data, V2M_SYS_CFGDATA);
+ writel(devfn, V2M_SYS_CFGCTRL);
+
+ do {
+ val = readl(V2M_SYS_CFGSTAT);
+ } while (val == 0);
+
+ return !!(val & SYS_CFG_ERR);
+}
+
/* Use the ARM Watchdog System to cause reset */
void reset_cpu(ulong addr)
{
- writeb(WDT_EN, &wdt_base->wdogcontrol);
- writel(WDT_RESET_LOAD, &wdt_base->wdogload);
- while (1)
- ;
+ if (v2m_cfg_write(SYS_CFG_REBOOT | SYS_CFG_SITE_MB, 0))
+ printf("Unable to reboot\n");
}
/*
@@ -251,7 +268,7 @@
return get_timer(0);
}
-ulong get_tbclk (void)
+ulong get_tbclk(void)
{
return (ulong)CONFIG_SYS_HZ;
}
diff --git a/board/atmel/at91sam9260ek/at91sam9260ek.c b/board/atmel/at91sam9260ek/at91sam9260ek.c
index 3aa394a..8d3fc75 100644
--- a/board/atmel/at91sam9260ek/at91sam9260ek.c
+++ b/board/atmel/at91sam9260ek/at91sam9260ek.c
@@ -30,6 +30,7 @@
#include <asm/arch/at91_pmc.h>
#include <asm/arch/at91_rstc.h>
#include <asm/arch/gpio.h>
+#include <atmel_mci.h>
#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
# include <net.h>
@@ -143,6 +144,15 @@
}
#endif
+#ifdef CONFIG_GENERIC_ATMEL_MCI
+int board_mmc_init(bd_t *bd)
+{
+ at91_mci_hw_init();
+
+ return atmel_mci_init((void *)ATMEL_BASE_MCI);
+}
+#endif
+
int board_early_init_f(void)
{
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
@@ -157,18 +167,6 @@
int board_init(void)
{
-#ifdef CONFIG_AT91SAM9G20EK_2MMC
- /* arch number of AT91SAM9G20EK_2MMC-Board */
- gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G20EK_2MMC;
-#else
-#ifdef CONFIG_AT91SAM9G20EK
- /* arch number of AT91SAM9G20EK-Board */
- gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G20EK;
-#else
- /* arch number of AT91SAM9260EK-Board */
- gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9260EK;
-#endif
-#endif
/* adress of boot parameters */
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
diff --git a/board/ti/omap2420h4/Makefile b/board/atmel/at91sam9n12ek/Makefile
similarity index 74%
copy from board/ti/omap2420h4/Makefile
copy to board/atmel/at91sam9n12ek/Makefile
index cddd7e6..3aa67d5 100644
--- a/board/ti/omap2420h4/Makefile
+++ b/board/atmel/at91sam9n12ek/Makefile
@@ -1,7 +1,15 @@
#
-# (C) Copyright 2000-2006
+# (C) Copyright 2003-2008
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
+# (C) Copyright 2008
+# Stelian Pop <stelian.pop@leadtechdesign.com>
+# Lead Tech Design <www.leadtechdesign.com>
+#
+# (C) Copyright 2013
+# Josh Wu <josh.wu@atmel.com>
+# Atmel corporation <www.atmel.com>
+#
# See file CREDITS for list of people who contributed to this
# project.
#
@@ -12,7 +20,7 @@
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
@@ -25,11 +33,10 @@
LIB = $(obj)lib$(BOARD).o
-COBJS := omap2420h4.o mem.o sys_info.o
-SOBJS := lowlevel_init.o
+COBJS-y += at91sam9n12ek.o
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
+SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
diff --git a/board/atmel/at91sam9n12ek/at91sam9n12ek.c b/board/atmel/at91sam9n12ek/at91sam9n12ek.c
new file mode 100644
index 0000000..8752794
--- /dev/null
+++ b/board/atmel/at91sam9n12ek/at91sam9n12ek.c
@@ -0,0 +1,228 @@
+/*
+ * (C) Copyright 2013 Atmel Corporation
+ * Josh Wu <josh.wu@atmel.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/at91sam9x5_matrix.h>
+#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/at91_pio.h>
+#include <asm/arch/clk.h>
+#include <lcd.h>
+#include <atmel_hlcdc.h>
+#include <atmel_mci.h>
+
+#ifdef CONFIG_LCD_INFO
+#include <nand.h>
+#include <version.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* ------------------------------------------------------------------------- */
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+#ifdef CONFIG_NAND_ATMEL
+static void at91sam9n12ek_nand_hw_init(void)
+{
+ struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
+ struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
+ unsigned long csa;
+
+ /* Assign CS3 to NAND/SmartMedia Interface */
+ csa = readl(&matrix->ebicsa);
+ csa |= AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA;
+ /* Configure databus */
+ csa &= ~AT91_MATRIX_NFD0_ON_D16; /* nandflash connect to D0~D15 */
+ /* Configure IO drive */
+ csa &= ~AT91_MATRIX_EBI_EBI_IOSR_NORMAL;
+
+ writel(csa, &matrix->ebicsa);
+
+ /* Configure SMC CS3 for NAND/SmartMedia */
+ writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) |
+ AT91_SMC_SETUP_NRD(2) | AT91_SMC_SETUP_NCS_RD(0),
+ &smc->cs[3].setup);
+ writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(5) |
+ AT91_SMC_PULSE_NRD(4) | AT91_SMC_PULSE_NCS_RD(6),
+ &smc->cs[3].pulse);
+ writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(7),
+ &smc->cs[3].cycle);
+ writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
+ AT91_SMC_MODE_EXNW_DISABLE |
+#ifdef CONFIG_SYS_NAND_DBW_16
+ AT91_SMC_MODE_DBW_16 |
+#else /* CONFIG_SYS_NAND_DBW_8 */
+ AT91_SMC_MODE_DBW_8 |
+#endif
+ AT91_SMC_MODE_TDF_CYCLE(1),
+ &smc->cs[3].mode);
+
+ /* Configure RDY/BSY pin */
+ at91_set_pio_input(AT91_PIO_PORTD, 5, 1);
+
+ /* Configure ENABLE pin for NandFlash */
+ at91_set_pio_output(AT91_PIO_PORTD, 4, 1);
+
+ at91_set_a_periph(AT91_PIO_PORTD, 0, 1); /* NAND OE */
+ at91_set_a_periph(AT91_PIO_PORTD, 1, 1); /* NAND WE */
+ at91_set_a_periph(AT91_PIO_PORTD, 2, 1); /* ALE */
+ at91_set_a_periph(AT91_PIO_PORTD, 3, 1); /* CLE */
+}
+#endif
+
+#ifdef CONFIG_LCD
+vidinfo_t panel_info = {
+ .vl_col = 480,
+ .vl_row = 272,
+ .vl_clk = 9000000,
+ .vl_bpix = LCD_BPP,
+ .vl_sync = 0,
+ .vl_tft = 1,
+ .vl_hsync_len = 5,
+ .vl_left_margin = 8,
+ .vl_right_margin = 43,
+ .vl_vsync_len = 10,
+ .vl_upper_margin = 4,
+ .vl_lower_margin = 12,
+ .mmio = ATMEL_BASE_LCDC,
+};
+
+void lcd_enable(void)
+{
+ at91_set_pio_output(AT91_PIO_PORTC, 25, 0); /* power up */
+}
+
+void lcd_disable(void)
+{
+ at91_set_pio_output(AT91_PIO_PORTC, 25, 1); /* power down */
+}
+
+#ifdef CONFIG_LCD_INFO
+void lcd_show_board_info(void)
+{
+ ulong dram_size, nand_size;
+ int i;
+ char temp[32];
+
+ lcd_printf("%s\n", U_BOOT_VERSION);
+ lcd_printf("ATMEL Corp\n");
+ lcd_printf("at91@atmel.com\n");
+ lcd_printf("%s CPU at %s MHz\n",
+ ATMEL_CPU_NAME,
+ strmhz(temp, get_cpu_clk_rate()));
+
+ dram_size = 0;
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
+ dram_size += gd->bd->bi_dram[i].size;
+ nand_size = 0;
+ for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
+ nand_size += nand_info[i].size;
+ lcd_printf(" %ld MB SDRAM, %ld MB NAND\n",
+ dram_size >> 20,
+ nand_size >> 20);
+}
+#endif /* CONFIG_LCD_INFO */
+#endif /* CONFIG_LCD */
+
+/* SPI chip select control */
+#ifdef CONFIG_ATMEL_SPI
+#include <spi.h>
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+ return bus == 0 && cs < 2;
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+ switch (slave->cs) {
+ case 0:
+ at91_set_pio_output(AT91_PIO_PORTA, 14, 0);
+ break;
+ case 1:
+ at91_set_pio_output(AT91_PIO_PORTA, 7, 0);
+ break;
+ }
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+ switch (slave->cs) {
+ case 0:
+ at91_set_pio_output(AT91_PIO_PORTA, 14, 1);
+ break;
+ case 1:
+ at91_set_pio_output(AT91_PIO_PORTA, 7, 1);
+ break;
+ }
+}
+#endif /* CONFIG_ATMEL_SPI */
+
+#ifdef CONFIG_GENERIC_ATMEL_MCI
+int board_mmc_init(bd_t *bd)
+{
+ at91_mci_hw_init();
+
+ return atmel_mci_init((void *)ATMEL_BASE_HSMCI0);
+}
+#endif
+
+int board_early_init_f(void)
+{
+ /* Enable clocks for all PIOs */
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+ writel((1 << ATMEL_ID_PIOAB) | (1 << ATMEL_ID_PIOCD), &pmc->pcer);
+
+ at91_seriald_hw_init();
+ return 0;
+}
+
+int board_init(void)
+{
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+#ifdef CONFIG_NAND_ATMEL
+ at91sam9n12ek_nand_hw_init();
+#endif
+
+#ifdef CONFIG_ATMEL_SPI
+ at91_spi0_hw_init(1 << 0);
+#endif
+
+#ifdef CONFIG_LCD
+ at91_lcd_hw_init();
+#endif
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
+ CONFIG_SYS_SDRAM_SIZE);
+ return 0;
+}
diff --git a/board/ti/omap2420h4/Makefile b/board/atmel/sama5d3xek/Makefile
similarity index 77%
rename from board/ti/omap2420h4/Makefile
rename to board/atmel/sama5d3xek/Makefile
index cddd7e6..45d24d2 100644
--- a/board/ti/omap2420h4/Makefile
+++ b/board/atmel/sama5d3xek/Makefile
@@ -1,7 +1,14 @@
#
-# (C) Copyright 2000-2006
+# (C) Copyright 2003-2008
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
+# (C) Copyright 2008
+# Stelian Pop <stelian@popies.net>
+# Lead Tech Design <www.leadtechdesign.com>
+#
+# (C) Copyright 2013
+# Bo Shen <voice.shen@atmel.com>
+#
# See file CREDITS for list of people who contributed to this
# project.
#
@@ -12,7 +19,7 @@
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
@@ -25,11 +32,10 @@
LIB = $(obj)lib$(BOARD).o
-COBJS := omap2420h4.o mem.o sys_info.o
-SOBJS := lowlevel_init.o
+COBJS-y += sama5d3xek.o
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
+SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
diff --git a/board/atmel/sama5d3xek/sama5d3xek.c b/board/atmel/sama5d3xek/sama5d3xek.c
new file mode 100644
index 0000000..541296d
--- /dev/null
+++ b/board/atmel/sama5d3xek/sama5d3xek.c
@@ -0,0 +1,275 @@
+/*
+ * Copyright (C) 2012 - 2013 Atmel Corporation
+ * Bo Shen <voice.shen@atmel.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mmc.h>
+#include <asm/io.h>
+#include <asm/arch/sama5d3_smc.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/clk.h>
+#include <lcd.h>
+#include <atmel_lcdc.h>
+#include <atmel_mci.h>
+#include <net.h>
+#include <netdev.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* ------------------------------------------------------------------------- */
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+#ifdef CONFIG_NAND_ATMEL
+void sama5d3xek_nand_hw_init(void)
+{
+ struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
+
+ at91_periph_clk_enable(ATMEL_ID_SMC);
+
+ /* Configure SMC CS3 for NAND/SmartMedia */
+ writel(AT91_SMC_SETUP_NWE(2) | AT91_SMC_SETUP_NCS_WR(1) |
+ AT91_SMC_SETUP_NRD(2) | AT91_SMC_SETUP_NCS_RD(1),
+ &smc->cs[3].setup);
+ writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(5) |
+ AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(5),
+ &smc->cs[3].pulse);
+ writel(AT91_SMC_CYCLE_NWE(8) | AT91_SMC_CYCLE_NRD(8),
+ &smc->cs[3].cycle);
+ writel(AT91_SMC_TIMINGS_TCLR(3) | AT91_SMC_TIMINGS_TADL(10) |
+ AT91_SMC_TIMINGS_TAR(3) | AT91_SMC_TIMINGS_TRR(4) |
+ AT91_SMC_TIMINGS_TWB(5) | AT91_SMC_TIMINGS_RBNSEL(3)|
+ AT91_SMC_TIMINGS_NFSEL(1), &smc->cs[3].timings);
+ writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
+ AT91_SMC_MODE_EXNW_DISABLE |
+#ifdef CONFIG_SYS_NAND_DBW_16
+ AT91_SMC_MODE_DBW_16 |
+#else /* CONFIG_SYS_NAND_DBW_8 */
+ AT91_SMC_MODE_DBW_8 |
+#endif
+ AT91_SMC_MODE_TDF_CYCLE(3),
+ &smc->cs[3].mode);
+}
+#endif
+
+#ifdef CONFIG_CMD_USB
+static void sama5d3xek_usb_hw_init(void)
+{
+ at91_set_pio_output(AT91_PIO_PORTD, 25, 0);
+ at91_set_pio_output(AT91_PIO_PORTD, 26, 0);
+ at91_set_pio_output(AT91_PIO_PORTD, 27, 0);
+}
+#endif
+
+#ifdef CONFIG_GENERIC_ATMEL_MCI
+static void sama5d3xek_mci_hw_init(void)
+{
+ at91_mci_hw_init();
+
+ at91_set_pio_output(AT91_PIO_PORTB, 10, 0); /* MCI0 Power */
+}
+#endif
+
+#ifdef CONFIG_LCD
+vidinfo_t panel_info = {
+ .vl_col = 800,
+ .vl_row = 480,
+ .vl_clk = 24000000,
+ .vl_sync = ATMEL_LCDC_INVLINE_NORMAL | ATMEL_LCDC_INVFRAME_NORMAL,
+ .vl_bpix = LCD_BPP,
+ .vl_tft = 1,
+ .vl_hsync_len = 128,
+ .vl_left_margin = 64,
+ .vl_right_margin = 64,
+ .vl_vsync_len = 2,
+ .vl_upper_margin = 22,
+ .vl_lower_margin = 21,
+ .mmio = ATMEL_BASE_LCDC,
+};
+
+void lcd_enable(void)
+{
+}
+
+void lcd_disable(void)
+{
+}
+
+static void sama5d3xek_lcd_hw_init(void)
+{
+ gd->fb_base = CONFIG_SAMA5D3_LCD_BASE;
+
+ /* The higher 8 bit of LCD is board related */
+ at91_set_c_periph(AT91_PIO_PORTC, 14, 0); /* LCDD16 */
+ at91_set_c_periph(AT91_PIO_PORTC, 13, 0); /* LCDD17 */
+ at91_set_c_periph(AT91_PIO_PORTC, 12, 0); /* LCDD18 */
+ at91_set_c_periph(AT91_PIO_PORTC, 11, 0); /* LCDD19 */
+ at91_set_c_periph(AT91_PIO_PORTC, 10, 0); /* LCDD20 */
+ at91_set_c_periph(AT91_PIO_PORTC, 15, 0); /* LCDD21 */
+ at91_set_c_periph(AT91_PIO_PORTE, 27, 0); /* LCDD22 */
+ at91_set_c_periph(AT91_PIO_PORTE, 28, 0); /* LCDD23 */
+
+ /* Configure lower 16 bit of LCD and enable clock */
+ at91_lcd_hw_init();
+}
+
+#ifdef CONFIG_LCD_INFO
+#include <nand.h>
+#include <version.h>
+
+void lcd_show_board_info(void)
+{
+ ulong dram_size, nand_size;
+ int i;
+ char temp[32];
+
+ lcd_printf("%s\n", U_BOOT_VERSION);
+ lcd_printf("(C) 2013 ATMEL Corp\n");
+ lcd_printf("at91@atmel.com\n");
+ lcd_printf("%s CPU at %s MHz\n", get_cpu_name(),
+ strmhz(temp, get_cpu_clk_rate()));
+
+ dram_size = 0;
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
+ dram_size += gd->bd->bi_dram[i].size;
+
+ nand_size = 0;
+#ifdef CONFIG_NAND_ATMEL
+ for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
+ nand_size += nand_info[i].size;
+#endif
+ lcd_printf("%ld MB SDRAM, %ld MB NAND\n",
+ dram_size >> 20, nand_size >> 20);
+}
+#endif /* CONFIG_LCD_INFO */
+#endif /* CONFIG_LCD */
+
+int board_early_init_f(void)
+{
+ at91_seriald_hw_init();
+
+ return 0;
+}
+
+int board_init(void)
+{
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+#ifdef CONFIG_NAND_ATMEL
+ sama5d3xek_nand_hw_init();
+#endif
+#ifdef CONFIG_CMD_USB
+ sama5d3xek_usb_hw_init();
+#endif
+#ifdef CONFIG_GENERIC_ATMEL_MCI
+ sama5d3xek_mci_hw_init();
+#endif
+#ifdef CONFIG_ATMEL_SPI
+ at91_spi0_hw_init(1 << 0);
+#endif
+#ifdef CONFIG_MACB
+ if (has_emac())
+ at91_macb_hw_init();
+#endif
+#ifdef CONFIG_LCD
+ if (has_lcdc())
+ sama5d3xek_lcd_hw_init();
+#endif
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
+ CONFIG_SYS_SDRAM_SIZE);
+ return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+ int rc = 0;
+
+#ifdef CONFIG_MACB
+ if (has_emac())
+ rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC, 0x00);
+#endif
+
+ return rc;
+}
+
+#ifdef CONFIG_GENERIC_ATMEL_MCI
+int board_mmc_init(bd_t *bis)
+{
+ int rc = 0;
+
+ rc = atmel_mci_init((void *)ATMEL_BASE_MCI0);
+
+ return rc;
+}
+#endif
+
+/* SPI chip select control */
+#ifdef CONFIG_ATMEL_SPI
+#include <spi.h>
+
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+ return bus == 0 && cs < 4;
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+ switch (slave->cs) {
+ case 0:
+ at91_set_pio_output(AT91_PIO_PORTD, 13, 0);
+ case 1:
+ at91_set_pio_output(AT91_PIO_PORTD, 14, 0);
+ case 2:
+ at91_set_pio_output(AT91_PIO_PORTD, 15, 0);
+ case 3:
+ at91_set_pio_output(AT91_PIO_PORTD, 16, 0);
+ default:
+ break;
+ }
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+ switch (slave->cs) {
+ case 0:
+ at91_set_pio_output(AT91_PIO_PORTD, 13, 1);
+ case 1:
+ at91_set_pio_output(AT91_PIO_PORTD, 14, 1);
+ case 2:
+ at91_set_pio_output(AT91_PIO_PORTD, 15, 1);
+ case 3:
+ at91_set_pio_output(AT91_PIO_PORTD, 16, 1);
+ default:
+ break;
+ }
+}
+#endif /* CONFIG_ATMEL_SPI */
diff --git a/board/bf609-ezkit/soft_switch.c b/board/bf609-ezkit/soft_switch.c
new file mode 100644
index 0000000..e0c8d93
--- /dev/null
+++ b/board/bf609-ezkit/soft_switch.c
@@ -0,0 +1,171 @@
+/*
+ * U-boot - main board file
+ *
+ * Copyright (c) 2008-2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <common.h>
+#include <asm/blackfin.h>
+#include <asm/io.h>
+#include <i2c.h>
+#include "soft_switch.h"
+
+struct switch_config {
+ uchar dir0; /* IODIRA */
+ uchar dir1; /* IODIRB */
+ uchar value0; /* OLATA */
+ uchar value1; /* OLATB */
+};
+
+static struct switch_config switch_config_array[NUM_SWITCH] = {
+ {
+/*
+ U45 Port A U45 Port B
+
+ 7--------------- RMII_CLK_EN | 7--------------- ~TEMP_THERM_EN
+ | 6------------- ~CNT0ZM_EN | | 6------------- ~TEMP_IRQ_EN
+ | | 5----------- ~CNT0DG_EN | | | 5----------- ~UART0CTS_146_EN
+ | | | 4--------- ~CNT0UD_EN | | | | 4--------- ~UART0CTS_RST_EN
+ | | | | 3------- ~CAN0RX_EN | | | | | 3------- ~UART0CTS_RTS_LPBK
+ | | | | | 2----- ~CAN0_ERR_EN | | | | | | 2----- ~UART0CTS_EN
+ | | | | | | 1--- ~CAN_STB | | | | | | | 1--- ~UART0RX_EN
+ | | | | | | | 0- CAN_EN | | | | | | | | 0- ~UART0RTS_EN
+ | | | | | | | | | | | | | | | | |
+ O O O O O O O O | O O O O O O O O (I/O direction)
+ 1 0 0 0 0 0 1 1 | 1 1 1 1 1 0 0 0 (value being set)
+*/
+ .dir0 = 0x0, /* all output */
+ .dir1 = 0x0, /* all output */
+ .value0 = RMII_CLK_EN | CAN_STB | CAN_EN,
+ .value1 = TEMP_THERM_EN | TEMP_IRQ_EN | UART0CTS_146_EN
+ | UART0CTS_RST_EN | UART0CTS_RTS_LPBK,
+ },
+ {
+/*
+ U46 Port A U46 Port B
+
+ 7--------------- ~LED4_GPIO_EN | 7--------------- EMPTY
+ | 6------------- ~LED3_GPIO_EN | | 6------------- ~SPI0D3_EN
+ | | 5----------- ~LED2_GPIO_EN | | | 5----------- ~SPI0D2_EN
+ | | | 4--------- ~LED1_GPIO_EN | | | | 4--------- ~SPIFLASH_CS_EN
+ | | | | 3------- SMC0_LP0_EN | | | | | 3------- ~SD_WP_EN
+ | | | | | 2----- EMPTY | | | | | | 2----- ~SD_CD_EN
+ | | | | | | 1--- SMC0_EPPI2 | | | | | | | 1--- ~PUSHBUTTON2_EN
+ _LP1_SWITCH
+ | | | | | | | 0- OVERRIDE_SMC0 | | | | | | | | 0- ~PUSHBUTTON1_EN
+ _LP0_BOOT
+ | | | | | | | | | | | | | | | | |
+ O O O O O O O O | O O O O O O O O (I/O direction)
+ 0 0 0 0 0 X 0 1 | X 0 0 0 0 0 0 0 (value being set)
+*/
+ .dir0 = 0x0, /* all output */
+ .dir1 = 0x0, /* all output */
+#ifdef CONFIG_BFIN_LINKPORT
+ .value0 = OVERRIDE_SMC0_LP0_BOOT,
+#else
+ .value0 = SMC0_EPPI2_LP1_SWITCH,
+#endif
+ .value1 = 0x0,
+ },
+ {
+/*
+ U47 Port A U47 Port B
+
+ 7--------------- ~PD2_SPI0MISO | 7--------------- EMPTY
+ _EI3_EN
+ | 6------------- ~PD1_SPI0D3 | | 6------------- EMPTY
+ _EPPI1D17
+ _SPI0SEL2
+ _EI3_EN
+ | | 5----------- ~PD0_SPI0D2 | | | 5----------- EMPTY
+ _EPPI1D16
+ _SPI0SEL3
+ _EI3_EN
+ | | | 4--------- ~WAKE_PUSH | | | | 4--------- EMPTY
+ BUTTON_EN
+ | | | | 3------- ~ETHERNET_EN | | | | | 3------- EMPTY
+ | | | | | 2----- PHYAD0 | | | | | | 2----- EMPTY
+ | | | | | | 1--- PHY_PWR | | | | | | | 1--- ~PD4_SPI0CK_EI3_EN
+ _DWN_INT
+ | | | | | | | 0- ~PHYINT_EN | | | | | | | | 0- ~PD3_SPI0MOSI_EI3_EN
+ | | | | | | | | | | | | | | | | |
+ O O O O O I I O | O O O O O O O O (I/O direction)
+ 1 1 1 0 0 0 0 0 | X X X X X X 1 1 (value being set)
+*/
+ .dir0 = 0x6, /* bits 1 and 2 input, all others output */
+ .dir1 = 0x0, /* all output */
+ .value0 = PD1_SPI0D3_EN | PD0_SPI0D2_EN,
+ .value1 = 0,
+ },
+};
+
+static int setup_soft_switch(int addr, struct switch_config *config)
+{
+ int ret = 0;
+
+ ret = i2c_write(addr, OLATA, 1, &config->value0, 1);
+ if (ret)
+ return ret;
+ ret = i2c_write(addr, OLATB, 1, &config->value1, 1);
+ if (ret)
+ return ret;
+
+ ret = i2c_write(addr, IODIRA, 1, &config->dir0, 1);
+ if (ret)
+ return ret;
+ return i2c_write(addr, IODIRB, 1, &config->dir1, 1);
+}
+
+int config_switch_bit(int addr, int port, int bit, int dir, uchar value)
+{
+ int ret, data_reg, dir_reg;
+ uchar tmp;
+
+ if (port == IO_PORT_A) {
+ data_reg = OLATA;
+ dir_reg = IODIRA;
+ } else {
+ data_reg = OLATB;
+ dir_reg = IODIRB;
+ }
+
+ if (dir == IO_PORT_INPUT) {
+ ret = i2c_read(addr, dir_reg, 1, &tmp, 1);
+ if (ret)
+ return ret;
+ tmp |= bit;
+ return i2c_write(addr, dir_reg, 1, &tmp, 1);
+ } else {
+ ret = i2c_read(addr, data_reg, 1, &tmp, 1);
+ if (ret)
+ return ret;
+ if (value)
+ tmp |= bit;
+ else
+ tmp &= ~bit;
+ ret = i2c_write(addr, data_reg, 1, &tmp, 1);
+ if (ret)
+ return ret;
+ ret = i2c_read(addr, dir_reg, 1, &tmp, 1);
+ if (ret)
+ return ret;
+ tmp &= ~bit;
+ return i2c_write(addr, dir_reg, 1, &tmp, 1);
+ }
+}
+
+int setup_board_switches(void)
+{
+ int ret;
+ int i;
+
+ for (i = 0; i < NUM_SWITCH; i++) {
+ ret = setup_soft_switch(SWITCH_ADDR + i,
+ &switch_config_array[i]);
+ if (ret)
+ return ret;
+ }
+ return 0;
+}
diff --git a/board/bf609-ezkit/soft_switch.h b/board/bf609-ezkit/soft_switch.h
new file mode 100644
index 0000000..d147fe1
--- /dev/null
+++ b/board/bf609-ezkit/soft_switch.h
@@ -0,0 +1,80 @@
+/*
+ * U-boot - main board file
+ *
+ * Copyright (c) 2008-2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __BOARD_SOFT_SWITCH_H__
+#define __BOARD_SOFT_SWITCH_H__
+
+#include <asm/soft_switch.h>
+
+/* switch 0 port A */
+#define CAN_EN 0x1
+#define CAN_STB 0x2
+#define CAN0_ERR_EN 0x4
+#define CAN0RX_EN 0x8
+#define CNT0UD_EN 0x10
+#define CNT0DG_EN 0x20
+#define CNT0ZM_EN 0x40
+#define RMII_CLK_EN 0x80
+
+/* switch 0 port B */
+#define UART0RTS_EN 0x1
+#define UART0RX_EN 0x2
+#define UART0CTS_EN 0x4
+#define UART0CTS_RTS_LPBK 0x8
+#define UART0CTS_RST_EN 0x10
+#define UART0CTS_146_EN 0x20
+#define TEMP_IRQ_EN 0x40
+#define TEMP_THERM_EN 0x80
+
+/* switch 1 port A */
+#define OVERRIDE_SMC0_LP0_BOOT 0x1
+#define SMC0_EPPI2_LP1_SWITCH 0x2
+#define SMC0_LP0_EN 0x8
+#define LED1_GPIO_EN 0x10
+#define LED2_GPIO_EN 0x20
+#define LED3_GPIO_EN 0x40
+#define LED4_GPIO_EN 0x80
+
+/* switch 1 port B */
+#define PUSHBUTTON1_EN 0x1
+#define PUSHBUTTON2_EN 0x2
+#define SD_CD_EN 0x4
+#define SD_WP_EN 0x8
+#define SPIFLASH_CS_EN 0x10
+#define SPI0D2_EN 0x20
+#define SPI0D3_EN 0x40
+
+/* switch 2 port A */
+#define PHYINT_EN 0x1
+#define PHY_PWR_DWN_INT 0x2
+#define PHYAD0 0x4
+#define ETHERNET_EN 0x8
+#define WAKE_PUSHBUTTON_EN 0x10
+#define PD0_SPI0D2_EN 0x20
+#define PD1_SPI0D3_EN 0x40
+#define PD2_SPI0MISO_EN 0x80
+
+/* switch 2 port B */
+#define PD3_SPI0MOSI_EN 0x1
+#define PD4_SPI0CK_EN 0x2
+
+#ifdef CONFIG_BFIN_BOARD_VERSION_1_0
+#define SWITCH_ADDR 0x21
+#else
+#define SWITCH_ADDR 0x20
+#endif
+
+#define NUM_SWITCH 3
+#define IODIRA 0x0
+#define IODIRB 0x1
+#define OLATA 0x14
+#define OLATB 0x15
+
+int setup_board_switches(void);
+
+#endif /* __BOARD_SOFT_SWITCH_H__ */
diff --git a/board/boundary/nitrogen6x/nitrogen6dl.cfg b/board/boundary/nitrogen6x/nitrogen6dl.cfg
index d6da96c..6625790 100644
--- a/board/boundary/nitrogen6x/nitrogen6dl.cfg
+++ b/board/boundary/nitrogen6x/nitrogen6dl.cfg
@@ -19,7 +19,7 @@
* Foundation Inc. 51 Franklin Street Fifth Floor Boston,
* MA 02110-1301 USA
*
- * Refer docs/README.imxmage for more details about how-to configure
+ * Refer doc/README.imximage for more details about how-to configure
* and create imximage boot image
*
* The syntax is taken as close as possible with the kwbimage
diff --git a/board/boundary/nitrogen6x/nitrogen6dl2g.cfg b/board/boundary/nitrogen6x/nitrogen6dl2g.cfg
index 0b1c35c..dccd497 100644
--- a/board/boundary/nitrogen6x/nitrogen6dl2g.cfg
+++ b/board/boundary/nitrogen6x/nitrogen6dl2g.cfg
@@ -19,7 +19,7 @@
* Foundation Inc. 51 Franklin Street Fifth Floor Boston,
* MA 02110-1301 USA
*
- * Refer docs/README.imxmage for more details about how-to configure
+ * Refer doc/README.imximage for more details about how-to configure
* and create imximage boot image
*
* The syntax is taken as close as possible with the kwbimage
diff --git a/board/boundary/nitrogen6x/nitrogen6q.cfg b/board/boundary/nitrogen6x/nitrogen6q.cfg
index 680a853..e317374 100644
--- a/board/boundary/nitrogen6x/nitrogen6q.cfg
+++ b/board/boundary/nitrogen6x/nitrogen6q.cfg
@@ -19,7 +19,7 @@
* Foundation Inc. 51 Franklin Street Fifth Floor Boston,
* MA 02110-1301 USA
*
- * Refer docs/README.imxmage for more details about how-to configure
+ * Refer doc/README.imximage for more details about how-to configure
* and create imximage boot image
*
* The syntax is taken as close as possible with the kwbimage
diff --git a/board/boundary/nitrogen6x/nitrogen6q2g.cfg b/board/boundary/nitrogen6x/nitrogen6q2g.cfg
index f57ab0e..5a06220 100644
--- a/board/boundary/nitrogen6x/nitrogen6q2g.cfg
+++ b/board/boundary/nitrogen6x/nitrogen6q2g.cfg
@@ -19,7 +19,7 @@
* Foundation Inc. 51 Franklin Street Fifth Floor Boston,
* MA 02110-1301 USA
*
- * Refer docs/README.imxmage for more details about how-to configure
+ * Refer doc/README.imximage for more details about how-to configure
* and create imximage boot image
*
* The syntax is taken as close as possible with the kwbimage
diff --git a/board/boundary/nitrogen6x/nitrogen6s.cfg b/board/boundary/nitrogen6x/nitrogen6s.cfg
index b5af5cc..d7d5f29 100644
--- a/board/boundary/nitrogen6x/nitrogen6s.cfg
+++ b/board/boundary/nitrogen6x/nitrogen6s.cfg
@@ -19,7 +19,7 @@
* Foundation Inc. 51 Franklin Street Fifth Floor Boston,
* MA 02110-1301 USA
*
- * Refer docs/README.imxmage for more details about how-to configure
+ * Refer doc/README.imximage for more details about how-to configure
* and create imximage boot image
*
* The syntax is taken as close as possible with the kwbimage
diff --git a/board/boundary/nitrogen6x/nitrogen6s1g.cfg b/board/boundary/nitrogen6x/nitrogen6s1g.cfg
index 5aeefc8..cf2690a 100644
--- a/board/boundary/nitrogen6x/nitrogen6s1g.cfg
+++ b/board/boundary/nitrogen6x/nitrogen6s1g.cfg
@@ -19,7 +19,7 @@
* Foundation Inc. 51 Franklin Street Fifth Floor Boston,
* MA 02110-1301 USA
*
- * Refer docs/README.imxmage for more details about how-to configure
+ * Refer doc/README.imximage for more details about how-to configure
* and create imximage boot image
*
* The syntax is taken as close as possible with the kwbimage
diff --git a/board/buffalo/lsxl/kwbimage-lschl.cfg b/board/buffalo/lsxl/kwbimage-lschl.cfg
index 2b9b3cd..4ac381e 100644
--- a/board/buffalo/lsxl/kwbimage-lschl.cfg
+++ b/board/buffalo/lsxl/kwbimage-lschl.cfg
@@ -20,7 +20,7 @@
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
# MA 02110-1301 USA
#
-# Refer docs/README.kwimage for more details about how-to configure
+# Refer doc/README.kwbimage for more details about how-to configure
# and create kirkwood boot image
#
diff --git a/board/buffalo/lsxl/kwbimage-lsxhl.cfg b/board/buffalo/lsxl/kwbimage-lsxhl.cfg
index 8a94b6c..c62f22c 100644
--- a/board/buffalo/lsxl/kwbimage-lsxhl.cfg
+++ b/board/buffalo/lsxl/kwbimage-lsxhl.cfg
@@ -20,7 +20,7 @@
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
# MA 02110-1301 USA
#
-# Refer docs/README.kwimage for more details about how-to configure
+# Refer doc/README.kwbimage for more details about how-to configure
# and create kirkwood boot image
#
diff --git a/board/cloudengines/pogo_e02/kwbimage.cfg b/board/cloudengines/pogo_e02/kwbimage.cfg
index a02e88d..32c0cd5 100644
--- a/board/cloudengines/pogo_e02/kwbimage.cfg
+++ b/board/cloudengines/pogo_e02/kwbimage.cfg
@@ -23,7 +23,7 @@
# You should have received a copy of the GNU General Public License
# along with this program; If not, see <http://www.gnu.org/licenses/>.
#
-# Refer docs/README.kwimage for more details about how-to configure
+# Refer doc/README.kwbimage for more details about how-to configure
# and create kirkwood boot image
#
diff --git a/board/d-link/dns325/kwbimage.cfg b/board/d-link/dns325/kwbimage.cfg
index 97cb090..6df7939 100644
--- a/board/d-link/dns325/kwbimage.cfg
+++ b/board/d-link/dns325/kwbimage.cfg
@@ -25,7 +25,7 @@
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
# MA 02110-1301 USA
#
-# Refer docs/README.kwimage for more details about how-to configure
+# Refer doc/README.kwbimage for more details about how-to configure
# and create kirkwood boot image
#
diff --git a/board/davinci/da8xxevm/da830evm.c b/board/davinci/da8xxevm/da830evm.c
index c45c94b..a4e9254 100644
--- a/board/davinci/da8xxevm/da830evm.c
+++ b/board/davinci/da8xxevm/da830evm.c
@@ -39,135 +39,43 @@
#include <asm/arch/hardware.h>
#include <asm/arch/emif_defs.h>
#include <asm/arch/emac_defs.h>
+#include <asm/arch/pinmux_defs.h>
#include <asm/io.h>
#include <nand.h>
#include <asm/arch/nand_defs.h>
#include <asm/arch/davinci_misc.h>
-DECLARE_GLOBAL_DATA_PTR;
-
-/* SPI0 pin muxer settings */
-static const struct pinmux_config spi0_pins[] = {
- { pinmux(7), 1, 3 },
- { pinmux(7), 1, 4 },
- { pinmux(7), 1, 5 },
- { pinmux(7), 1, 6 },
- { pinmux(7), 1, 7 }
-};
-
-/* EMIF-A bus pins for 8-bit NAND support on CS3 */
-static const struct pinmux_config emifa_nand_pins[] = {
- { pinmux(13), 1, 6 },
- { pinmux(13), 1, 7 },
- { pinmux(14), 1, 0 },
- { pinmux(14), 1, 1 },
- { pinmux(14), 1, 2 },
- { pinmux(14), 1, 3 },
- { pinmux(14), 1, 4 },
- { pinmux(14), 1, 5 },
- { pinmux(15), 1, 7 },
- { pinmux(16), 1, 0 },
- { pinmux(18), 1, 1 },
- { pinmux(18), 1, 4 },
- { pinmux(18), 1, 5 },
-};
-
-/* EMAC PHY interface pins */
-static const struct pinmux_config emac_pins[] = {
- { pinmux(9), 0, 5 },
- { pinmux(10), 2, 1 },
- { pinmux(10), 2, 2 },
- { pinmux(10), 2, 3 },
- { pinmux(10), 2, 4 },
- { pinmux(10), 2, 5 },
- { pinmux(10), 2, 6 },
- { pinmux(10), 2, 7 },
- { pinmux(11), 2, 0 },
- { pinmux(11), 2, 1 },
-};
-
-/* UART pin muxer settings */
-static const struct pinmux_config uart_pins[] = {
- { pinmux(8), 2, 7 },
- { pinmux(9), 2, 0 }
-};
-
-/* I2C pin muxer settings */
-static const struct pinmux_config i2c_pins[] = {
- { pinmux(8), 2, 3 },
- { pinmux(8), 2, 4 }
-};
-
-#ifdef CONFIG_USE_NAND
-/* NAND pin muxer settings */
-const struct pinmux_config aemif_pins[] = {
- { pinmux(13), 1, 6 },
- { pinmux(13), 1, 7 },
- { pinmux(14), 1, 0 },
- { pinmux(14), 1, 1 },
- { pinmux(14), 1, 2 },
- { pinmux(14), 1, 3 },
- { pinmux(14), 1, 4 },
- { pinmux(14), 1, 5 },
- { pinmux(14), 1, 6 },
- { pinmux(14), 1, 7 },
- { pinmux(15), 1, 0 },
- { pinmux(15), 1, 1 },
- { pinmux(15), 1, 2 },
- { pinmux(15), 1, 3 },
- { pinmux(15), 1, 4 },
- { pinmux(15), 1, 5 },
- { pinmux(15), 1, 6 },
- { pinmux(15), 1, 7 },
- { pinmux(16), 1, 0 },
- { pinmux(16), 1, 1 },
- { pinmux(16), 1, 2 },
- { pinmux(16), 1, 3 },
- { pinmux(16), 1, 4 },
- { pinmux(16), 1, 5 },
- { pinmux(16), 1, 6 },
- { pinmux(16), 1, 7 },
- { pinmux(17), 1, 0 },
- { pinmux(17), 1, 1 },
- { pinmux(17), 1, 2 },
- { pinmux(17), 1, 3 },
- { pinmux(17), 1, 4 },
- { pinmux(17), 1, 5 },
- { pinmux(17), 1, 6 },
- { pinmux(17), 1, 7 },
- { pinmux(18), 1, 0 },
- { pinmux(18), 1, 1 },
- { pinmux(18), 1, 2 },
- { pinmux(18), 1, 3 },
- { pinmux(18), 1, 4 },
- { pinmux(18), 1, 5 },
- { pinmux(18), 1, 6 },
- { pinmux(18), 1, 7 },
- { pinmux(10), 1, 0 }
-};
+#ifdef CONFIG_DAVINCI_MMC
+#include <mmc.h>
+#include <asm/arch/sdmmc_defs.h>
#endif
-
-/* USB0_DRVVBUS pin muxer settings */
-static const struct pinmux_config usb_pins[] = {
- { pinmux(9), 1, 1 }
-};
+DECLARE_GLOBAL_DATA_PTR;
static const struct pinmux_resource pinmuxes[] = {
#ifdef CONFIG_SPI_FLASH
- PINMUX_ITEM(spi0_pins),
+ PINMUX_ITEM(spi0_pins_base),
+ PINMUX_ITEM(spi0_pins_scs0),
+ PINMUX_ITEM(spi0_pins_ena),
#endif
- PINMUX_ITEM(uart_pins),
- PINMUX_ITEM(i2c_pins),
+ PINMUX_ITEM(uart2_pins_txrx),
+ PINMUX_ITEM(i2c0_pins),
#ifdef CONFIG_USB_DA8XX
PINMUX_ITEM(usb_pins),
#endif
#ifdef CONFIG_USE_NAND
- PINMUX_ITEM(emifa_nand_pins),
- PINMUX_ITEM(aemif_pins),
+ PINMUX_ITEM(emifa_pins),
+ PINMUX_ITEM(emifa_pins_cs0),
+ PINMUX_ITEM(emifa_pins_cs2),
+ PINMUX_ITEM(emifa_pins_cs3),
#endif
#if defined(CONFIG_DRIVER_TI_EMAC)
- PINMUX_ITEM(emac_pins),
+ PINMUX_ITEM(emac_pins_rmii),
+ PINMUX_ITEM(emac_pins_mdio),
+ PINMUX_ITEM(emac_pins_rmii_clk_source),
+#endif
+#ifdef CONFIG_DAVINCI_MMC
+ PINMUX_ITEM(mmc0_pins_8bit)
#endif
};
@@ -177,8 +85,31 @@
{ DAVINCI_LPSC_EMAC }, /* image download */
{ DAVINCI_LPSC_UART2 }, /* console */
{ DAVINCI_LPSC_GPIO },
+#ifdef CONFIG_DAVINCI_MMC
+ { DAVINCI_LPSC_MMC_SD },
+#endif
+
};
+#ifdef CONFIG_DAVINCI_MMC
+static struct davinci_mmc mmc_sd0 = {
+ .reg_base = (struct davinci_mmc_regs *)DAVINCI_MMC_SD0_BASE,
+ .host_caps = MMC_MODE_8BIT,
+ .voltages = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .version = MMC_CTLR_VERSION_2,
+};
+
+int board_mmc_init(bd_t *bis)
+{
+ mmc_sd0.input_clk = clk_get(DAVINCI_MMCSD_CLKID);
+
+ printf("%x\n", mmc_sd0.input_clk);
+
+ /* Add slot-0 to mmc subsystem */
+ return davinci_mmc_init(bis, &mmc_sd0);
+}
+#endif
+
int board_init(void)
{
#ifndef CONFIG_USE_IRQ
diff --git a/board/davinci/da8xxevm/u-boot-spl-da850evm.lds b/board/davinci/da8xxevm/u-boot-spl-da850evm.lds
index b1b8701..6fa4509 100644
--- a/board/davinci/da8xxevm/u-boot-spl-da850evm.lds
+++ b/board/davinci/da8xxevm/u-boot-spl-da850evm.lds
@@ -55,11 +55,6 @@
__rel_dyn_end = .;
} >.sram
- .dynsym : {
- __dynsym_start = .;
- *(.dynsym)
- } >.sram
-
.bss :
{
. = ALIGN(4);
diff --git a/board/davinci/da8xxevm/u-boot-spl-hawk.lds b/board/davinci/da8xxevm/u-boot-spl-hawk.lds
index 596a9e0..b452f20 100644
--- a/board/davinci/da8xxevm/u-boot-spl-hawk.lds
+++ b/board/davinci/da8xxevm/u-boot-spl-hawk.lds
@@ -61,7 +61,6 @@
__image_copy_end = .;
__rel_dyn_start = .;
__rel_dyn_end = .;
- __dynsym_start = .;
__got_start = .;
. = ALIGN(4);
diff --git a/board/dvlhost/u-boot.lds b/board/dvlhost/u-boot.lds
index 6d4b187..f359112 100644
--- a/board/dvlhost/u-boot.lds
+++ b/board/dvlhost/u-boot.lds
@@ -30,6 +30,7 @@
. = ALIGN (4);
.text : {
+ *(.__image_copy_start)
arch/arm/cpu/ixp/start.o(.text*)
net/libnet.o(.text*)
board/dvlhost/libdvlhost.o(.text*)
@@ -62,17 +63,23 @@
. = ALIGN (4);
- __image_copy_end = .;
-
- .rel.dyn : {
- __rel_dyn_start = .;
- *(.rel*)
- __rel_dyn_end = .;
+ .image_copy_end :
+ {
+ *(.__image_copy_end)
}
- .dynsym : {
- __dynsym_start = .;
- *(.dynsym)
+ .rel_dyn_start :
+ {
+ *(.__rel_dyn_start)
+ }
+
+ .rel.dyn : {
+ *(.rel*)
+ }
+
+ .rel_dyn_end :
+ {
+ *(.__rel_dyn_end)
}
_end = .;
@@ -96,6 +103,7 @@
KEEP(*(.__bss_end));
}
+ /DISCARD/ : { *(.dynsym) }
/DISCARD/ : { *(.dynstr*) }
/DISCARD/ : { *(.dynamic*) }
/DISCARD/ : { *(.plt*) }
diff --git a/board/esg/ima3-mx53/imximage.cfg b/board/esg/ima3-mx53/imximage.cfg
index fce7492..ab22385 100644
--- a/board/esg/ima3-mx53/imximage.cfg
+++ b/board/esg/ima3-mx53/imximage.cfg
@@ -20,7 +20,7 @@
* Foundation Inc. 51 Franklin Street Fifth Floor Boston,
* MA 02110-1301 USA
*
- * Refer docs/README.imxmage for more details about how-to configure
+ * Refer doc/README.imximage for more details about how-to configure
* and create imximage boot image
*
* The syntax is taken as close as possible with the kwbimage
diff --git a/board/freescale/b4860qds/b4860qds.c b/board/freescale/b4860qds/b4860qds.c
index 41887c2..a39c17a 100644
--- a/board/freescale/b4860qds/b4860qds.c
+++ b/board/freescale/b4860qds/b4860qds.c
@@ -166,11 +166,13 @@
ret = select_i2c_ch_pca(I2C_CH_VSC3316);
if (!ret) {
ret = vsc3316_config(VSC3316_TX_ADDRESS,
- vsc16_tx_sgmii_lane_ab, num_vsc16_con);
+ vsc16_tx_4sfp_sgmii_12_56,
+ num_vsc16_con);
if (ret)
return ret;
ret = vsc3316_config(VSC3316_RX_ADDRESS,
- vsc16_rx_sgmii_lane_ab, num_vsc16_con);
+ vsc16_rx_4sfp_sgmii_12_56,
+ num_vsc16_con);
if (ret)
return ret;
} else {
diff --git a/board/freescale/b4860qds/b4860qds_crossbar_con.h b/board/freescale/b4860qds/b4860qds_crossbar_con.h
index 994dec5..c2b6c44 100644
--- a/board/freescale/b4860qds/b4860qds_crossbar_con.h
+++ b/board/freescale/b4860qds/b4860qds_crossbar_con.h
@@ -26,42 +26,53 @@
static const int8_t vsc16_tx_amc[8][2] = { {15, 3}, {0, 2}, {7, 4}, {9, 10},
{5, 11}, {4, 5}, {2, 6}, {12, 9} };
-static const int8_t vsc16_tx_sfp[8][2] = { {15, 8}, {0, 0}, {7, 7}, {9, 1},
- {5, 15}, {4, 14}, {2, 12}, {12, 13} };
+static const int8_t vsc16_tx_sfp[8][2] = { {15, 7}, {0, 1}, {7, 8}, {9, 0},
+ {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} };
-static const int8_t vsc16_tx_sgmii_lane_ab[8][2] = { {2, 14}, {12, 15},
- {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} };
+static const int8_t vsc16_tx_4sfp_sgmii_12_56[8][2] = { {15, 7}, {0, 1},
+ {7, 8}, {9, 0}, {2, 14}, {12, 15},
+ {-1, -1}, {-1, -1} };
+
+static const int8_t vsc16_tx_4sfp_sgmii_34[8][2] = { {15, 7}, {0, 1},
+ {7, 8}, {9, 0}, {5, 14}, {4, 15},
+ {-1, -1}, {-1, -1} };
#ifdef CONFIG_PPC_B4420
static const int8_t vsc16_tx_sgmii_lane_cd[8][2] = { {5, 14}, {4, 15},
{-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} };
#endif
+
static const int8_t vsc16_tx_aurora[8][2] = { {2, 13}, {12, 12}, {-1, -1},
{-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} };
static const int8_t vsc16_rx_amc[8][2] = { {3, 15}, {2, 1}, {4, 8}, {10, 9},
{11, 11}, {5, 10}, {6, 3}, {9, 12} };
-static const int8_t vsc16_rx_sfp[8][2] = { {0, 15}, {8, 1}, {1, 8}, {7, 9},
+static const int8_t vsc16_rx_sfp[8][2] = { {8, 15}, {0, 1}, {7, 8}, {1, 9},
{-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} };
-static const int8_t vsc16_rx_sgmii_lane_ab[8][2] = { {14, 3}, {15, 12},
- {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} };
+static const int8_t vsc16_rx_4sfp_sgmii_12_56[8][2] = { {8, 15}, {0, 1},
+ {7, 8}, {1, 9}, {14, 3}, {15, 12},
+ {-1, -1}, {-1, -1} };
+
+static const int8_t vsc16_rx_4sfp_sgmii_34[8][2] = { {8, 15}, {0, 1},
+ {7, 8}, {1, 9}, {14, 11}, {15, 10},
+ {-1, -1}, {-1, -1} };
#ifdef CONFIG_PPC_B4420
static const int8_t vsc16_rx_sgmii_lane_cd[8][2] = { {14, 11}, {15, 10},
{-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} };
#endif
-static const int8_t vsc16_rx_aurora[8][2] = { {12, 3}, {13, 12}, {-1, -1},
+static const int8_t vsc16_rx_aurora[8][2] = { {13, 3}, {12, 12}, {-1, -1},
{-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} };
static const int8_t vsc08_tx_amc[4][2] = { {2, 2}, {3, 3}, {7, 4}, {1, 5} };
-static const int8_t vsc08_tx_sfp[4][2] = { {2, 6}, {3, 7}, {7, 1}, {1, 0} };
+static const int8_t vsc08_tx_sfp[4][2] = { {2, 1}, {3, 0}, {7, 6}, {1, 7} };
static const int8_t vsc08_rx_amc[4][2] = { {2, 3}, {3, 4}, {4, 7}, {5, 1} };
-static const int8_t vsc08_rx_sfp[4][2] = { {6, 3}, {7, 4}, {1, 7}, {0, 1} };
+static const int8_t vsc08_rx_sfp[4][2] = { {1, 3}, {0, 4}, {6, 7}, {7, 1} };
#endif
diff --git a/board/freescale/b4860qds/ddr.c b/board/freescale/b4860qds/ddr.c
index dd4c0f6..b82b3d4 100644
--- a/board/freescale/b4860qds/ddr.c
+++ b/board/freescale/b4860qds/ddr.c
@@ -13,6 +13,7 @@
#include <asm/fsl_ddr_sdram.h>
#include <asm/fsl_ddr_dimm_params.h>
#include <asm/fsl_law.h>
+#include <../arch/powerpc/cpu/mpc8xxx/ddr/ddr.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -188,3 +189,74 @@
puts(" DDR: ");
return dram_size;
}
+
+unsigned long long step_assign_addresses(fsl_ddr_info_t *pinfo,
+ unsigned int dbw_cap_adj[])
+{
+ int i, j;
+ unsigned long long total_mem, current_mem_base, total_ctlr_mem;
+ unsigned long long rank_density, ctlr_density = 0;
+
+ current_mem_base = 0ull;
+ total_mem = 0;
+ /*
+ * This board has soldered DDR chips. DDRC1 has two rank.
+ * DDRC2 has only one rank.
+ * Assigning DDRC2 to lower address and DDRC1 to higher address.
+ */
+ if (pinfo->memctl_opts[0].memctl_interleaving) {
+ rank_density = pinfo->dimm_params[0][0].rank_density >>
+ dbw_cap_adj[0];
+ ctlr_density = rank_density;
+
+ debug("rank density is 0x%llx, ctlr density is 0x%llx\n",
+ rank_density, ctlr_density);
+ for (i = CONFIG_NUM_DDR_CONTROLLERS - 1; i >= 0; i--) {
+ switch (pinfo->memctl_opts[i].memctl_interleaving_mode) {
+ case FSL_DDR_CACHE_LINE_INTERLEAVING:
+ case FSL_DDR_PAGE_INTERLEAVING:
+ case FSL_DDR_BANK_INTERLEAVING:
+ case FSL_DDR_SUPERBANK_INTERLEAVING:
+ total_ctlr_mem = 2 * ctlr_density;
+ break;
+ default:
+ panic("Unknown interleaving mode");
+ }
+ pinfo->common_timing_params[i].base_address =
+ current_mem_base;
+ pinfo->common_timing_params[i].total_mem =
+ total_ctlr_mem;
+ total_mem = current_mem_base + total_ctlr_mem;
+ debug("ctrl %d base 0x%llx\n", i, current_mem_base);
+ debug("ctrl %d total 0x%llx\n", i, total_ctlr_mem);
+ }
+ } else {
+ /*
+ * Simple linear assignment if memory
+ * controllers are not interleaved.
+ */
+ for (i = CONFIG_NUM_DDR_CONTROLLERS - 1; i >= 0; i--) {
+ total_ctlr_mem = 0;
+ pinfo->common_timing_params[i].base_address =
+ current_mem_base;
+ for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
+ /* Compute DIMM base addresses. */
+ unsigned long long cap =
+ pinfo->dimm_params[i][j].capacity;
+ pinfo->dimm_params[i][j].base_address =
+ current_mem_base;
+ debug("ctrl %d dimm %d base 0x%llx\n",
+ i, j, current_mem_base);
+ current_mem_base += cap;
+ total_ctlr_mem += cap;
+ }
+ debug("ctrl %d total 0x%llx\n", i, total_ctlr_mem);
+ pinfo->common_timing_params[i].total_mem =
+ total_ctlr_mem;
+ total_mem += total_ctlr_mem;
+ }
+ }
+ debug("Total mem by %s is 0x%llx\n", __func__, total_mem);
+
+ return total_mem;
+}
diff --git a/board/freescale/b4860qds/eth_b4860qds.c b/board/freescale/b4860qds/eth_b4860qds.c
index 68e2725..3bcda6d 100644
--- a/board/freescale/b4860qds/eth_b4860qds.c
+++ b/board/freescale/b4860qds/eth_b4860qds.c
@@ -275,6 +275,24 @@
fm_info_set_phy_address(FM1_DTSEC4,
CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR);
break;
+ case 0x98:
+ /* XAUI in Slot1 and Slot2 */
+ debug("Setting phy addresses on B4860 QDS AMC2PEX-2S for FM1_10GEC1: %x\n",
+ CONFIG_SYS_FM1_10GEC1_PHY_ADDR);
+ fm_info_set_phy_address(FM1_10GEC1,
+ CONFIG_SYS_FM1_10GEC1_PHY_ADDR);
+ debug("Setting phy addresses on B4860 QDS AMC2PEX-2S for FM1_10GEC2: %x\n",
+ CONFIG_SYS_FM1_10GEC2_PHY_ADDR);
+ fm_info_set_phy_address(FM1_10GEC2,
+ CONFIG_SYS_FM1_10GEC2_PHY_ADDR);
+ break;
+ case 0x9E:
+ /* XAUI in Slot2 */
+ debug("Setting phy addresses on B4860 QDS AMC2PEX-2S for FM1_10GEC2: %x\n",
+ CONFIG_SYS_FM1_10GEC2_PHY_ADDR);
+ fm_info_set_phy_address(FM1_10GEC2,
+ CONFIG_SYS_FM1_10GEC2_PHY_ADDR);
+ break;
default:
printf("Fman: Unsupported SerDes2 Protocol 0x%02x\n",
serdes2_prtcl);
@@ -300,6 +318,23 @@
}
}
+ for (i = FM1_10GEC1; i < FM1_10GEC1 + CONFIG_SYS_NUM_FM1_10GEC; i++) {
+ int idx = i - FM1_10GEC1;
+
+ switch (fm_info_get_enet_if(i)) {
+ case PHY_INTERFACE_MODE_XGMII:
+ fm_info_set_mdio(i,
+ miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME));
+ break;
+ default:
+ printf("Fman1: 10GSEC%u set to unknown interface %i\n",
+ idx + 1, fm_info_get_enet_if(i));
+ fm_info_set_phy_address(i, 0);
+ break;
+ }
+ }
+
+
cpu_eth_init(bis);
#endif
diff --git a/board/freescale/b4860qds/law.c b/board/freescale/b4860qds/law.c
index 4142e01..b26725b 100644
--- a/board/freescale/b4860qds/law.c
+++ b/board/freescale/b4860qds/law.c
@@ -33,8 +33,12 @@
SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN),
#endif
SET_LAW(QIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_IFC),
+#ifdef CONFIG_SYS_MAPLE_MEM_PHYS
+ SET_LAW(CONFIG_SYS_MAPLE_MEM_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_MAPLE),
+#endif
#ifdef CONFIG_SYS_DCSRBAR_PHYS
- SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_DCSR),
+ /* Limit DCSR to 32M to access NPC Trace Buffer */
+ SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_DCSR),
#endif
#ifdef CONFIG_SYS_NAND_BASE_PHYS
SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_IFC),
diff --git a/board/freescale/b4860qds/tlb.c b/board/freescale/b4860qds/tlb.c
index 6d634bf..29cc41b 100644
--- a/board/freescale/b4860qds/tlb.c
+++ b/board/freescale/b4860qds/tlb.c
@@ -106,7 +106,7 @@
#ifdef CONFIG_SYS_DCSRBAR_PHYS
SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 10, BOOKE_PAGESZ_4M, 1),
+ 0, 10, BOOKE_PAGESZ_32M, 1),
#endif
#ifdef CONFIG_SYS_NAND_BASE
/*
diff --git a/board/freescale/common/qixis.h b/board/freescale/common/qixis.h
index 8d914d5..2cf8738 100644
--- a/board/freescale/common/qixis.h
+++ b/board/freescale/common/qixis.h
@@ -78,7 +78,11 @@
u8 trig_stat;
u8 res12[3];
u8 trig_ctr[4];
- u8 res13[48];
+ u8 res13[16];
+ u8 clk_freq[6]; /* Clock Measurement Registers */
+ u8 res_c6[8];
+ u8 clk_base[2]; /* Clock Frequency Base Reg */
+ u8 res_d0[16];
u8 aux2[4]; /* Auxiliary Registers,0xE0 */
u8 res14[10];
u8 aux_ad;
diff --git a/board/freescale/corenet_ds/eth_superhydra.c b/board/freescale/corenet_ds/eth_superhydra.c
index ef9de25..ae07073 100644
--- a/board/freescale/corenet_ds/eth_superhydra.c
+++ b/board/freescale/corenet_ds/eth_superhydra.c
@@ -605,8 +605,8 @@
lane = serdes_get_first_lane(XAUI_FM1);
if (lane >= 0) {
debug("FM1@TGEC1 expects XAUI in slot %u\n", lane_to_slot[lane]);
- mdio_mux[FM1_10GEC1].mask = BRDCFG1_EMI2_SEL_MASK;
- mdio_mux[FM1_10GEC1].val = BRDCFG1_EMI2_SEL_SLOT2;
+ mdio_mux[i].mask = BRDCFG1_EMI2_SEL_MASK;
+ mdio_mux[i].val = BRDCFG1_EMI2_SEL_SLOT2;
super_hydra_mdio_set_mux("SUPER_HYDRA_FM1_TGEC_MDIO",
mdio_mux[i].mask, mdio_mux[i].val);
}
@@ -704,8 +704,8 @@
lane = serdes_get_first_lane(XAUI_FM2);
if (lane >= 0) {
debug("FM2@TGEC1 expects XAUI in slot %u\n", lane_to_slot[lane]);
- mdio_mux[FM2_10GEC1].mask = BRDCFG1_EMI2_SEL_MASK;
- mdio_mux[FM2_10GEC1].val = BRDCFG1_EMI2_SEL_SLOT1;
+ mdio_mux[i].mask = BRDCFG1_EMI2_SEL_MASK;
+ mdio_mux[i].val = BRDCFG1_EMI2_SEL_SLOT1;
super_hydra_mdio_set_mux("SUPER_HYDRA_FM2_TGEC_MDIO",
mdio_mux[i].mask, mdio_mux[i].val);
}
diff --git a/board/freescale/corenet_ds/pbi.cfg b/board/freescale/corenet_ds/pbi.cfg
index 50806ca..af1ebd6 100644
--- a/board/freescale/corenet_ds/pbi.cfg
+++ b/board/freescale/corenet_ds/pbi.cfg
@@ -19,7 +19,7 @@
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
# MA 02110-1301 USA
#
-# Refer docs/README.pblimage for more details about how-to configure
+# Refer doc/README.pblimage for more details about how-to configure
# and create PBL boot image
#
diff --git a/board/freescale/corenet_ds/rcw_p5040ds.cfg b/board/freescale/corenet_ds/rcw_p5040ds.cfg
new file mode 100644
index 0000000..82fa741
--- /dev/null
+++ b/board/freescale/corenet_ds/rcw_p5040ds.cfg
@@ -0,0 +1,11 @@
+#
+# Default RCW for P5040DS.
+#
+
+#PBL preamble and RCW header
+aa55aa55 010e0100
+#64 bytes RCW data
+0c580000 00000000 22121200 00000000
+089c4400 00283000 58000000 61000000
+00000000 00000000 00000000 10070000
+00000000 00000000 00000000 00000000
diff --git a/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg b/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
index 996d788..bae5c23 100644
--- a/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
+++ b/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
@@ -20,7 +20,7 @@
* Foundation Inc. 51 Franklin Street Fifth Floor Boston,
* MA 02110-1301 USA
*
- * Refer docs/README.imxmage for more details about how-to configure
+ * Refer doc/README.imximage for more details about how-to configure
* and create imximage boot image
*
* The syntax is taken as close as possible with the kwbimage
diff --git a/board/freescale/mx25pdk/imximage.cfg b/board/freescale/mx25pdk/imximage.cfg
index c42a283..8cc8bde 100644
--- a/board/freescale/mx25pdk/imximage.cfg
+++ b/board/freescale/mx25pdk/imximage.cfg
@@ -15,7 +15,7 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * Refer docs/README.imxmage for more details about how-to configure
+ * Refer doc/README.imximage for more details about how-to configure
* and create imximage boot image
*
* The syntax is taken as close as possible with the kwbimage
diff --git a/board/freescale/mx31ads/u-boot.lds b/board/freescale/mx31ads/u-boot.lds
index 4969960..963d29f 100644
--- a/board/freescale/mx31ads/u-boot.lds
+++ b/board/freescale/mx31ads/u-boot.lds
@@ -34,6 +34,7 @@
. = ALIGN(4);
.text :
{
+ *(.__image_copy_start)
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
@@ -65,17 +66,23 @@
. = ALIGN(4);
- __image_copy_end = .;
-
- .rel.dyn : {
- __rel_dyn_start = .;
- *(.rel*)
- __rel_dyn_end = .;
+ .image_copy_end :
+ {
+ *(.__image_copy_end)
}
- .dynsym : {
- __dynsym_start = .;
- *(.dynsym)
+ .rel_dyn_start :
+ {
+ *(.__rel_dyn_start)
+ }
+
+ .rel.dyn : {
+ *(.rel*)
+ }
+
+ .rel_dyn_end :
+ {
+ *(.__rel_dyn_end)
}
_end = .;
@@ -100,6 +107,7 @@
}
/DISCARD/ : { *(.bss*) }
+ /DISCARD/ : { *(.dynsym) }
/DISCARD/ : { *(.dynstr*) }
/DISCARD/ : { *(.dynsym*) }
/DISCARD/ : { *(.dynamic*) }
diff --git a/board/freescale/mx31pdk/mx31pdk.c b/board/freescale/mx31pdk/mx31pdk.c
index 49158bd..4f6cfee 100644
--- a/board/freescale/mx31pdk/mx31pdk.c
+++ b/board/freescale/mx31pdk/mx31pdk.c
@@ -39,7 +39,21 @@
#ifdef CONFIG_SPL_BUILD
void board_init_f(ulong bootflag)
{
- relocate_code(CONFIG_SPL_TEXT_BASE);
+ /*
+ * copy ourselves from where we are running to where we were
+ * linked at. Use ulong pointers as all addresses involved
+ * are 4-byte-aligned.
+ */
+ ulong *start_ptr, *end_ptr, *link_ptr, *run_ptr, *dst;
+ asm volatile ("ldr %0, =_start" : "=r"(start_ptr));
+ asm volatile ("ldr %0, =_end" : "=r"(end_ptr));
+ asm volatile ("ldr %0, =board_init_f" : "=r"(link_ptr));
+ asm volatile ("adr %0, board_init_f" : "=r"(run_ptr));
+ for (dst = start_ptr; dst < end_ptr; dst++)
+ *dst = *(dst+(run_ptr-link_ptr));
+ /*
+ * branch to nand_boot's link-time address.
+ */
asm volatile("ldr pc, =nand_boot");
}
#endif
diff --git a/board/freescale/mx51evk/imximage.cfg b/board/freescale/mx51evk/imximage.cfg
index 3e141ee..aaa490a 100644
--- a/board/freescale/mx51evk/imximage.cfg
+++ b/board/freescale/mx51evk/imximage.cfg
@@ -20,7 +20,7 @@
* Foundation Inc. 51 Franklin Street Fifth Floor Boston,
* MA 02110-1301 USA
*
- * Refer docs/README.imxmage for more details about how-to configure
+ * Refer doc/README.imximage for more details about how-to configure
* and create imximage boot image
*
* The syntax is taken as close as possible with the kwbimage
diff --git a/board/freescale/mx53ard/imximage_dd3.cfg b/board/freescale/mx53ard/imximage_dd3.cfg
index 4633e4d..a103d95 100644
--- a/board/freescale/mx53ard/imximage_dd3.cfg
+++ b/board/freescale/mx53ard/imximage_dd3.cfg
@@ -20,7 +20,7 @@
* Foundation Inc. 51 Franklin Street Fifth Floor Boston,
* MA 02110-1301 USA
*
- * Refer docs/README.imxmage for more details about how-to configure
+ * Refer doc/README.imximage for more details about how-to configure
* and create imximage boot image
*
* The syntax is taken as close as possible with the kwbimage
diff --git a/board/freescale/mx53evk/imximage.cfg b/board/freescale/mx53evk/imximage.cfg
index 1cd61d5..c1cfdda 100644
--- a/board/freescale/mx53evk/imximage.cfg
+++ b/board/freescale/mx53evk/imximage.cfg
@@ -20,7 +20,7 @@
* Foundation Inc. 51 Franklin Street Fifth Floor Boston,
* MA 02110-1301 USA
*
- * Refer docs/README.imxmage for more details about how-to configure
+ * Refer doc/README.imximage for more details about how-to configure
* and create imximage boot image
*
* The syntax is taken as close as possible with the kwbimage
diff --git a/board/freescale/mx53loco/imximage.cfg b/board/freescale/mx53loco/imximage.cfg
index e6b90c1..2f75ad0 100644
--- a/board/freescale/mx53loco/imximage.cfg
+++ b/board/freescale/mx53loco/imximage.cfg
@@ -20,7 +20,7 @@
* Foundation Inc. 51 Franklin Street Fifth Floor Boston,
* MA 02110-1301 USA
*
- * Refer docs/README.imxmage for more details about how-to configure
+ * Refer doc/README.imximage for more details about how-to configure
* and create imximage boot image
*
* The syntax is taken as close as possible with the kwbimage
diff --git a/board/freescale/mx53smd/imximage.cfg b/board/freescale/mx53smd/imximage.cfg
index 4633e4d..a103d95 100644
--- a/board/freescale/mx53smd/imximage.cfg
+++ b/board/freescale/mx53smd/imximage.cfg
@@ -20,7 +20,7 @@
* Foundation Inc. 51 Franklin Street Fifth Floor Boston,
* MA 02110-1301 USA
*
- * Refer docs/README.imxmage for more details about how-to configure
+ * Refer doc/README.imximage for more details about how-to configure
* and create imximage boot image
*
* The syntax is taken as close as possible with the kwbimage
diff --git a/board/freescale/mx6qarm2/imximage.cfg b/board/freescale/mx6qarm2/imximage.cfg
index 4ed211e..6f18b37 100644
--- a/board/freescale/mx6qarm2/imximage.cfg
+++ b/board/freescale/mx6qarm2/imximage.cfg
@@ -20,7 +20,7 @@
* Foundation Inc. 51 Franklin Street Fifth Floor Boston,
* MA 02110-1301 USA
*
- * Refer docs/README.imxmage for more details about how-to configure
+ * Refer doc/README.imximage for more details about how-to configure
* and create imximage boot image
*
* The syntax is taken as close as possible with the kwbimage
diff --git a/board/freescale/mx6qsabreauto/imximage.cfg b/board/freescale/mx6qsabreauto/imximage.cfg
index bbff813..e720c6b 100644
--- a/board/freescale/mx6qsabreauto/imximage.cfg
+++ b/board/freescale/mx6qsabreauto/imximage.cfg
@@ -19,7 +19,7 @@
* Foundation Inc. 51 Franklin Street Fifth Floor Boston,
* MA 02110-1301 USA
*
- * Refer docs/README.imxmage for more details about how-to configure
+ * Refer doc/README.imximage for more details about how-to configure
* and create imximage boot image
*
* The syntax is taken as close as possible with the kwbimage
diff --git a/board/freescale/p2041rdb/p2041rdb.c b/board/freescale/p2041rdb/p2041rdb.c
index a706a6d..44d3e0c 100644
--- a/board/freescale/p2041rdb/p2041rdb.c
+++ b/board/freescale/p2041rdb/p2041rdb.c
@@ -227,6 +227,17 @@
"'00' is unsupported\n");
else
actual[i] = freq[i][clock];
+
+ /*
+ * PC board uses a different CPLD with PB board, this CPLD
+ * has cpld_ver_sub = 1, and pcba_ver = 5. But CPLD on PB
+ * board has cpld_ver_sub = 0, and pcba_ver = 4.
+ */
+ if ((i == 1) && (CPLD_READ(cpld_ver_sub) == 1) &&
+ (CPLD_READ(pcba_ver) == 5)) {
+ /* PC board bank2 frequency */
+ actual[i] = freq[i-1][clock];
+ }
}
for (i = 0; i < NUM_SRDS_BANKS; i++) {
diff --git a/board/freescale/t4qds/ddr.c b/board/freescale/t4qds/ddr.c
index 692616a..058d625 100644
--- a/board/freescale/t4qds/ddr.c
+++ b/board/freescale/t4qds/ddr.c
@@ -19,6 +19,7 @@
struct board_specific_parameters {
u32 n_ranks;
u32 datarate_mhz_high;
+ u32 rank_gb;
u32 clk_adjust;
u32 wrlvl_start;
u32 wrlvl_ctl_2;
@@ -36,16 +37,19 @@
static const struct board_specific_parameters udimm0[] = {
/*
* memory controller 0
- * num| hi| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T
- * ranks| mhz|adjst| start | ctl2 | ctl3 | |delay |
+ * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T
+ * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay |
*/
- {2, 1350, 5, 7, 0x0809090b, 0x0c0c0d09, 0xff, 2, 0},
- {2, 1666, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0},
- {2, 2140, 5, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0},
- {1, 1350, 5, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0},
- {1, 1700, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0},
- {1, 1900, 4, 8, 0x080a0a0c, 0x0e0e0f0a, 0xff, 2, 0},
- {1, 2140, 4, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0},
+ {2, 1350, 4, 4, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0},
+ {2, 1350, 0, 5, 7, 0x0709090b, 0x0c0c0d09, 0xff, 2, 0},
+ {2, 1666, 4, 4, 8, 0x080a0a0d, 0x0d10100b, 0xff, 2, 0},
+ {2, 1666, 0, 5, 7, 0x080a0a0c, 0x0d0d0e0a, 0xff, 2, 0},
+ {2, 1900, 0, 4, 8, 0x090a0b0e, 0x0f11120c, 0xff, 2, 0},
+ {2, 2140, 0, 4, 8, 0x090a0b0e, 0x0f11120c, 0xff, 2, 0},
+ {1, 1350, 0, 5, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0},
+ {1, 1700, 0, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0},
+ {1, 1900, 0, 4, 8, 0x080a0a0c, 0x0e0e0f0a, 0xff, 2, 0},
+ {1, 2140, 0, 4, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0},
{}
};
@@ -61,19 +65,19 @@
static const struct board_specific_parameters rdimm0[] = {
/*
* memory controller 0
- * num| hi| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T
- * ranks| mhz|adjst| start | ctl2 | ctl3 | |delay |
+ * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T
+ * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay |
*/
- {4, 1350, 5, 9, 0x08070605, 0x07080805, 0xff, 2, 0},
- {4, 1666, 5, 8, 0x08070605, 0x07080805, 0xff, 2, 0},
- {4, 2140, 5, 8, 0x08070605, 0x07081805, 0xff, 2, 0},
- {2, 1350, 5, 7, 0x0809090b, 0x0c0c0d09, 0xff, 2, 0},
- {2, 1666, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0},
- {2, 2140, 5, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0},
- {1, 1350, 5, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0},
- {1, 1700, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0},
- {1, 1900, 4, 8, 0x080a0a0c, 0x0e0e0f0a, 0xff, 2, 0},
- {1, 2140, 4, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0},
+ {4, 1350, 0, 5, 9, 0x08070605, 0x07080805, 0xff, 2, 0},
+ {4, 1666, 0, 5, 8, 0x08070605, 0x07080805, 0xff, 2, 0},
+ {4, 2140, 0, 5, 8, 0x08070605, 0x07081805, 0xff, 2, 0},
+ {2, 1350, 0, 5, 7, 0x0809090b, 0x0c0c0d09, 0xff, 2, 0},
+ {2, 1666, 0, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0},
+ {2, 2140, 0, 5, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0},
+ {1, 1350, 0, 5, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0},
+ {1, 1700, 0, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0},
+ {1, 1900, 0, 4, 8, 0x080a0a0c, 0x0e0e0f0a, 0xff, 2, 0},
+ {1, 2140, 0, 4, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0},
{}
};
@@ -113,7 +117,8 @@
*/
ddr_freq = get_ddr_freq(0) / 1000000;
while (pbsp->datarate_mhz_high) {
- if (pbsp->n_ranks == pdimm->n_ranks) {
+ if (pbsp->n_ranks == pdimm->n_ranks &&
+ (pdimm->rank_density >> 30) >= pbsp->rank_gb) {
if (ddr_freq <= pbsp->datarate_mhz_high) {
popts->cpo_override = pbsp->cpo;
popts->write_data_delay =
@@ -146,6 +151,13 @@
panic("DIMM is not supported by this board");
}
found:
+ debug("Found timing match: n_ranks %d, data rate %d, rank_gb %d\n"
+ "\tclk_adjust %d, wrlvl_start %d, wrlvl_ctrl_2 0x%x, "
+ "wrlvl_ctrl_3 0x%x\n",
+ pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb,
+ pbsp->clk_adjust, pbsp->wrlvl_start, pbsp->wrlvl_ctl_2,
+ pbsp->wrlvl_ctl_3);
+
/*
* Factors to consider for half-strength driver enable:
* - number of DIMMs installed
diff --git a/board/freescale/t4qds/eth.c b/board/freescale/t4qds/eth.c
index a49c7d4..7103a0d 100644
--- a/board/freescale/t4qds/eth.c
+++ b/board/freescale/t4qds/eth.c
@@ -52,7 +52,7 @@
#define EMI1_SLOT4 4
#define EMI1_SLOT5 5
#define EMI1_SLOT7 7
-#define EMI2 8 /* tmp, FIXME */
+#define EMI2 8
/* Slot6 and Slot8 do not have EMI connections */
static int mdio_mux[NUM_FM_PORTS];
@@ -71,6 +71,14 @@
static u8 lane_to_slot_fsm1[] = {1, 1, 1, 1, 2, 2, 2, 2};
static u8 lane_to_slot_fsm2[] = {3, 3, 3, 3, 4, 4, 4, 4};
+static u8 slot_qsgmii_phyaddr[5][4] = {
+ {0, 0, 0, 0},/* not used, to make index match slot No. */
+ {0, 1, 2, 3},
+ {4, 5, 6, 7},
+ {8, 9, 0xa, 0xb},
+ {0xc, 0xd, 0xe, 0xf},
+};
+static u8 qsgmiiphy_fix[NUM_FM_PORTS] = {0};
static const char *t4240qds_mdio_name_for_muxval(u8 muxval)
{
@@ -180,21 +188,228 @@
void board_ft_fman_fixup_port(void *blob, char * prop, phys_addr_t pa,
enum fm_port port, int offset)
{
- if (mdio_mux[port] == EMI1_RGMII)
- fdt_set_phy_handle(blob, prop, pa, "phy_rgmii");
-
- /* TODO: will do with dts */
+ if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_SGMII) {
+ switch (port) {
+ case FM1_DTSEC1:
+ if (qsgmiiphy_fix[port])
+ fdt_set_phy_handle(blob, prop, pa,
+ "sgmii_phy21");
+ break;
+ case FM1_DTSEC2:
+ if (qsgmiiphy_fix[port])
+ fdt_set_phy_handle(blob, prop, pa,
+ "sgmii_phy22");
+ break;
+ case FM1_DTSEC3:
+ if (qsgmiiphy_fix[port])
+ fdt_set_phy_handle(blob, prop, pa,
+ "sgmii_phy23");
+ break;
+ case FM1_DTSEC4:
+ if (qsgmiiphy_fix[port])
+ fdt_set_phy_handle(blob, prop, pa,
+ "sgmii_phy24");
+ break;
+ case FM1_DTSEC6:
+ if (qsgmiiphy_fix[port])
+ fdt_set_phy_handle(blob, prop, pa,
+ "sgmii_phy12");
+ break;
+ case FM1_DTSEC9:
+ if (qsgmiiphy_fix[port])
+ fdt_set_phy_handle(blob, prop, pa,
+ "sgmii_phy14");
+ else
+ fdt_set_phy_handle(blob, prop, pa,
+ "phy_sgmii4");
+ break;
+ case FM1_DTSEC10:
+ if (qsgmiiphy_fix[port])
+ fdt_set_phy_handle(blob, prop, pa,
+ "sgmii_phy13");
+ else
+ fdt_set_phy_handle(blob, prop, pa,
+ "phy_sgmii3");
+ break;
+ case FM2_DTSEC1:
+ if (qsgmiiphy_fix[port])
+ fdt_set_phy_handle(blob, prop, pa,
+ "sgmii_phy41");
+ break;
+ case FM2_DTSEC2:
+ if (qsgmiiphy_fix[port])
+ fdt_set_phy_handle(blob, prop, pa,
+ "sgmii_phy42");
+ break;
+ case FM2_DTSEC3:
+ if (qsgmiiphy_fix[port])
+ fdt_set_phy_handle(blob, prop, pa,
+ "sgmii_phy43");
+ break;
+ case FM2_DTSEC4:
+ if (qsgmiiphy_fix[port])
+ fdt_set_phy_handle(blob, prop, pa,
+ "sgmii_phy44");
+ break;
+ case FM2_DTSEC6:
+ if (qsgmiiphy_fix[port])
+ fdt_set_phy_handle(blob, prop, pa,
+ "sgmii_phy32");
+ break;
+ case FM2_DTSEC9:
+ if (qsgmiiphy_fix[port])
+ fdt_set_phy_handle(blob, prop, pa,
+ "sgmii_phy34");
+ else
+ fdt_set_phy_handle(blob, prop, pa,
+ "phy_sgmii12");
+ break;
+ case FM2_DTSEC10:
+ if (qsgmiiphy_fix[port])
+ fdt_set_phy_handle(blob, prop, pa,
+ "sgmii_phy33");
+ else
+ fdt_set_phy_handle(blob, prop, pa,
+ "phy_sgmii11");
+ break;
+ default:
+ break;
+ }
+ }
}
void fdt_fixup_board_enet(void *fdt)
{
- /* TODO: will do with dts */
+ int i;
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 prtcl2 = in_be32(&gur->rcwsr[4]) & FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
+
+ prtcl2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
+ for (i = FM1_DTSEC1; i < NUM_FM_PORTS; i++) {
+ switch (fm_info_get_enet_if(i)) {
+ case PHY_INTERFACE_MODE_SGMII:
+ switch (mdio_mux[i]) {
+ case EMI1_SLOT1:
+ fdt_status_okay_by_alias(fdt, "emi1_slot1");
+ break;
+ case EMI1_SLOT2:
+ fdt_status_okay_by_alias(fdt, "emi1_slot2");
+ break;
+ case EMI1_SLOT3:
+ fdt_status_okay_by_alias(fdt, "emi1_slot3");
+ break;
+ case EMI1_SLOT4:
+ fdt_status_okay_by_alias(fdt, "emi1_slot4");
+ break;
+ default:
+ break;
+ }
+ break;
+ case PHY_INTERFACE_MODE_XGMII:
+ /* check if it's XFI interface for 10g */
+ if ((prtcl2 == 56) || (prtcl2 == 57)) {
+ fdt_status_okay_by_alias(fdt, "emi2_xfislot3");
+ break;
+ }
+ switch (i) {
+ case FM1_10GEC1:
+ fdt_status_okay_by_alias(fdt, "emi2_xauislot1");
+ break;
+ case FM1_10GEC2:
+ fdt_status_okay_by_alias(fdt, "emi2_xauislot2");
+ break;
+ case FM2_10GEC1:
+ fdt_status_okay_by_alias(fdt, "emi2_xauislot3");
+ break;
+ case FM2_10GEC2:
+ fdt_status_okay_by_alias(fdt, "emi2_xauislot4");
+ break;
+ default:
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+ }
+}
+
+static void initialize_qsgmiiphy_fix(void)
+{
+ int i;
+ unsigned short reg;
+
+ for (i = 1; i <= 4; i++) {
+ /*
+ * Try to read if a SGMII card is used, we do it slot by slot.
+ * if a SGMII PHY address is valid on a slot, then we mark
+ * all ports on the slot, then fix the PHY address for the
+ * marked port when doing dtb fixup.
+ */
+ if (miiphy_read(mdio_names[i],
+ SGMII_CARD_PORT1_PHY_ADDR, MII_PHYSID2, ®) != 0) {
+ debug("Slot%d PHY ID register 2 read failed\n", i);
+ continue;
+ }
+
+ debug("Slot%d MII_PHYSID2 @ 0x1c= 0x%04x\n", i, reg);
+
+ if (reg == 0xFFFF) {
+ /* No physical device present at this address */
+ continue;
+ }
+
+ switch (i) {
+ case 1:
+ qsgmiiphy_fix[FM1_DTSEC5] = 1;
+ qsgmiiphy_fix[FM1_DTSEC6] = 1;
+ qsgmiiphy_fix[FM1_DTSEC9] = 1;
+ qsgmiiphy_fix[FM1_DTSEC10] = 1;
+ slot_qsgmii_phyaddr[1][0] = SGMII_CARD_PORT1_PHY_ADDR;
+ slot_qsgmii_phyaddr[1][1] = SGMII_CARD_PORT2_PHY_ADDR;
+ slot_qsgmii_phyaddr[1][2] = SGMII_CARD_PORT3_PHY_ADDR;
+ slot_qsgmii_phyaddr[1][3] = SGMII_CARD_PORT4_PHY_ADDR;
+ break;
+ case 2:
+ qsgmiiphy_fix[FM1_DTSEC1] = 1;
+ qsgmiiphy_fix[FM1_DTSEC2] = 1;
+ qsgmiiphy_fix[FM1_DTSEC3] = 1;
+ qsgmiiphy_fix[FM1_DTSEC4] = 1;
+ slot_qsgmii_phyaddr[2][0] = SGMII_CARD_PORT1_PHY_ADDR;
+ slot_qsgmii_phyaddr[2][1] = SGMII_CARD_PORT2_PHY_ADDR;
+ slot_qsgmii_phyaddr[2][2] = SGMII_CARD_PORT3_PHY_ADDR;
+ slot_qsgmii_phyaddr[2][3] = SGMII_CARD_PORT4_PHY_ADDR;
+ break;
+ case 3:
+ qsgmiiphy_fix[FM2_DTSEC5] = 1;
+ qsgmiiphy_fix[FM2_DTSEC6] = 1;
+ qsgmiiphy_fix[FM2_DTSEC9] = 1;
+ qsgmiiphy_fix[FM2_DTSEC10] = 1;
+ slot_qsgmii_phyaddr[3][0] = SGMII_CARD_PORT1_PHY_ADDR;
+ slot_qsgmii_phyaddr[3][1] = SGMII_CARD_PORT2_PHY_ADDR;
+ slot_qsgmii_phyaddr[3][2] = SGMII_CARD_PORT3_PHY_ADDR;
+ slot_qsgmii_phyaddr[3][3] = SGMII_CARD_PORT4_PHY_ADDR;
+ break;
+ case 4:
+ qsgmiiphy_fix[FM2_DTSEC1] = 1;
+ qsgmiiphy_fix[FM2_DTSEC2] = 1;
+ qsgmiiphy_fix[FM2_DTSEC3] = 1;
+ qsgmiiphy_fix[FM2_DTSEC4] = 1;
+ slot_qsgmii_phyaddr[4][0] = SGMII_CARD_PORT1_PHY_ADDR;
+ slot_qsgmii_phyaddr[4][1] = SGMII_CARD_PORT2_PHY_ADDR;
+ slot_qsgmii_phyaddr[4][2] = SGMII_CARD_PORT3_PHY_ADDR;
+ slot_qsgmii_phyaddr[4][3] = SGMII_CARD_PORT4_PHY_ADDR;
+ break;
+ default:
+ break;
+ }
+ }
}
int board_eth_init(bd_t *bis)
{
#if defined(CONFIG_FMAN_ENET)
- int i;
+ int i, idx, lane, slot;
struct memac_mdio_info dtsec_mdio_info;
struct memac_mdio_info tgec_mdio_info;
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
@@ -236,6 +451,7 @@
t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT7);
t4240qds_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME, EMI2);
+ initialize_qsgmiiphy_fix();
switch (srds_prtcl_s1) {
case 1:
@@ -248,44 +464,48 @@
case 28:
case 36:
/* SGMII in Slot1 and Slot2 */
- fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR);
- fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT2_PHY_ADDR);
- fm_info_set_phy_address(FM1_DTSEC3, SGMII_CARD_PORT3_PHY_ADDR);
- fm_info_set_phy_address(FM1_DTSEC4, SGMII_CARD_PORT4_PHY_ADDR);
- fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT1_PHY_ADDR);
- fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC1, slot_qsgmii_phyaddr[2][0]);
+ fm_info_set_phy_address(FM1_DTSEC2, slot_qsgmii_phyaddr[2][1]);
+ fm_info_set_phy_address(FM1_DTSEC3, slot_qsgmii_phyaddr[2][2]);
+ fm_info_set_phy_address(FM1_DTSEC4, slot_qsgmii_phyaddr[2][3]);
+ fm_info_set_phy_address(FM1_DTSEC5, slot_qsgmii_phyaddr[1][0]);
+ fm_info_set_phy_address(FM1_DTSEC6, slot_qsgmii_phyaddr[1][1]);
if ((srds_prtcl_s2 != 56) && (srds_prtcl_s2 != 57)) {
fm_info_set_phy_address(FM1_DTSEC9,
- SGMII_CARD_PORT4_PHY_ADDR);
+ slot_qsgmii_phyaddr[1][3]);
fm_info_set_phy_address(FM1_DTSEC10,
- SGMII_CARD_PORT3_PHY_ADDR);
+ slot_qsgmii_phyaddr[1][2]);
}
break;
case 38:
- fm_info_set_phy_address(FM1_DTSEC5, QSGMII_CARD_PHY_ADDR);
- fm_info_set_phy_address(FM1_DTSEC6, QSGMII_CARD_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC1, slot_qsgmii_phyaddr[2][0]);
+ fm_info_set_phy_address(FM1_DTSEC2, slot_qsgmii_phyaddr[2][1]);
+ fm_info_set_phy_address(FM1_DTSEC3, slot_qsgmii_phyaddr[2][2]);
+ fm_info_set_phy_address(FM1_DTSEC4, slot_qsgmii_phyaddr[2][3]);
+ fm_info_set_phy_address(FM1_DTSEC5, slot_qsgmii_phyaddr[1][0]);
+ fm_info_set_phy_address(FM1_DTSEC6, slot_qsgmii_phyaddr[1][1]);
if ((srds_prtcl_s2 != 56) && (srds_prtcl_s2 != 57)) {
fm_info_set_phy_address(FM1_DTSEC9,
- QSGMII_CARD_PHY_ADDR);
+ slot_qsgmii_phyaddr[1][3]);
fm_info_set_phy_address(FM1_DTSEC10,
- QSGMII_CARD_PHY_ADDR);
+ slot_qsgmii_phyaddr[1][2]);
}
break;
case 40:
case 46:
case 48:
- fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT1_PHY_ADDR);
- fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC5, slot_qsgmii_phyaddr[1][0]);
+ fm_info_set_phy_address(FM1_DTSEC6, slot_qsgmii_phyaddr[1][1]);
if ((srds_prtcl_s2 != 56) && (srds_prtcl_s2 != 57)) {
fm_info_set_phy_address(FM1_DTSEC10,
- SGMII_CARD_PORT3_PHY_ADDR);
+ slot_qsgmii_phyaddr[1][3]);
fm_info_set_phy_address(FM1_DTSEC9,
- SGMII_CARD_PORT4_PHY_ADDR);
+ slot_qsgmii_phyaddr[1][2]);
}
- fm_info_set_phy_address(FM1_DTSEC1, QSGMII_CARD_PHY_ADDR);
- fm_info_set_phy_address(FM1_DTSEC2, QSGMII_CARD_PHY_ADDR);
- fm_info_set_phy_address(FM1_DTSEC3, QSGMII_CARD_PHY_ADDR);
- fm_info_set_phy_address(FM1_DTSEC4, QSGMII_CARD_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC1, slot_qsgmii_phyaddr[2][0]);
+ fm_info_set_phy_address(FM1_DTSEC2, slot_qsgmii_phyaddr[2][1]);
+ fm_info_set_phy_address(FM1_DTSEC3, slot_qsgmii_phyaddr[2][2]);
+ fm_info_set_phy_address(FM1_DTSEC4, slot_qsgmii_phyaddr[2][3]);
break;
default:
puts("Invalid SerDes1 protocol for T4240QDS\n");
@@ -293,7 +513,7 @@
}
for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
- int idx = i - FM1_DTSEC1, lane, slot;
+ idx = i - FM1_DTSEC1;
switch (fm_info_get_enet_if(i)) {
case PHY_INTERFACE_MODE_SGMII:
lane = serdes_get_first_lane(FSL_SRDS_1,
@@ -334,8 +554,16 @@
}
for (i = FM1_10GEC1; i < FM1_10GEC1 + CONFIG_SYS_NUM_FM1_10GEC; i++) {
+ idx = i - FM1_10GEC1;
switch (fm_info_get_enet_if(i)) {
case PHY_INTERFACE_MODE_XGMII:
+ lane = serdes_get_first_lane(FSL_SRDS_1,
+ XAUI_FM1_MAC9 + idx);
+ if (lane < 0)
+ break;
+ slot = lane_to_slot_fsm1[lane];
+ if (QIXIS_READ(present2) & (1 << (slot - 1)))
+ fm_disable_port(i);
mdio_mux[i] = EMI2;
fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
break;
@@ -344,7 +572,6 @@
}
}
-
#if (CONFIG_SYS_NUM_FMAN == 2)
switch (srds_prtcl_s2) {
case 1:
@@ -364,68 +591,64 @@
case 26:
/* XAUI/HiGig in Slot3, SGMII in Slot4 */
fm_info_set_phy_address(FM2_10GEC1, FM2_10GEC1_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC2, SGMII_CARD_PORT2_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC3, SGMII_CARD_PORT3_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC4, SGMII_CARD_PORT4_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC1, slot_qsgmii_phyaddr[4][0]);
+ fm_info_set_phy_address(FM2_DTSEC2, slot_qsgmii_phyaddr[4][1]);
+ fm_info_set_phy_address(FM2_DTSEC3, slot_qsgmii_phyaddr[4][2]);
+ fm_info_set_phy_address(FM2_DTSEC4, slot_qsgmii_phyaddr[4][3]);
break;
case 28:
case 36:
/* SGMII in Slot3 and Slot4 */
- fm_info_set_phy_address(FM2_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC2, SGMII_CARD_PORT2_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC3, SGMII_CARD_PORT3_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC4, SGMII_CARD_PORT4_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC5, SGMII_CARD_PORT1_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC9, SGMII_CARD_PORT4_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC10, SGMII_CARD_PORT3_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC1, slot_qsgmii_phyaddr[4][0]);
+ fm_info_set_phy_address(FM2_DTSEC2, slot_qsgmii_phyaddr[4][1]);
+ fm_info_set_phy_address(FM2_DTSEC3, slot_qsgmii_phyaddr[4][2]);
+ fm_info_set_phy_address(FM2_DTSEC4, slot_qsgmii_phyaddr[4][3]);
+ fm_info_set_phy_address(FM2_DTSEC5, slot_qsgmii_phyaddr[3][0]);
+ fm_info_set_phy_address(FM2_DTSEC6, slot_qsgmii_phyaddr[3][1]);
+ fm_info_set_phy_address(FM2_DTSEC9, slot_qsgmii_phyaddr[3][3]);
+ fm_info_set_phy_address(FM2_DTSEC10, slot_qsgmii_phyaddr[3][2]);
break;
case 38:
/* QSGMII in Slot3 and Slot4 */
- fm_info_set_phy_address(FM2_DTSEC1, QSGMII_CARD_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC2, QSGMII_CARD_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC3, QSGMII_CARD_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC4, QSGMII_CARD_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC5, QSGMII_CARD_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC6, QSGMII_CARD_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC9, QSGMII_CARD_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC10, QSGMII_CARD_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC1, slot_qsgmii_phyaddr[4][0]);
+ fm_info_set_phy_address(FM2_DTSEC2, slot_qsgmii_phyaddr[4][1]);
+ fm_info_set_phy_address(FM2_DTSEC3, slot_qsgmii_phyaddr[4][2]);
+ fm_info_set_phy_address(FM2_DTSEC4, slot_qsgmii_phyaddr[4][3]);
+ fm_info_set_phy_address(FM2_DTSEC5, slot_qsgmii_phyaddr[3][0]);
+ fm_info_set_phy_address(FM2_DTSEC6, slot_qsgmii_phyaddr[3][1]);
+ fm_info_set_phy_address(FM2_DTSEC9, slot_qsgmii_phyaddr[3][3]);
+ fm_info_set_phy_address(FM2_DTSEC10, slot_qsgmii_phyaddr[3][2]);
break;
case 40:
case 46:
case 48:
/* SGMII in Slot3 */
- fm_info_set_phy_address(FM2_DTSEC5, SGMII_CARD_PORT1_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC9, SGMII_CARD_PORT4_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC10, SGMII_CARD_PORT3_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC5, slot_qsgmii_phyaddr[3][0]);
+ fm_info_set_phy_address(FM2_DTSEC6, slot_qsgmii_phyaddr[3][1]);
+ fm_info_set_phy_address(FM2_DTSEC9, slot_qsgmii_phyaddr[3][3]);
+ fm_info_set_phy_address(FM2_DTSEC10, slot_qsgmii_phyaddr[3][2]);
/* QSGMII in Slot4 */
- fm_info_set_phy_address(FM2_DTSEC1, QSGMII_CARD_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC2, QSGMII_CARD_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC3, QSGMII_CARD_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC4, QSGMII_CARD_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC1, slot_qsgmii_phyaddr[4][0]);
+ fm_info_set_phy_address(FM2_DTSEC2, slot_qsgmii_phyaddr[4][1]);
+ fm_info_set_phy_address(FM2_DTSEC3, slot_qsgmii_phyaddr[4][2]);
+ fm_info_set_phy_address(FM2_DTSEC4, slot_qsgmii_phyaddr[4][3]);
break;
case 50:
case 52:
case 54:
fm_info_set_phy_address(FM2_10GEC1, FM2_10GEC1_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC1, QSGMII_CARD_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC2, QSGMII_CARD_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC3, QSGMII_CARD_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC4, QSGMII_CARD_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC1, slot_qsgmii_phyaddr[4][0]);
+ fm_info_set_phy_address(FM2_DTSEC2, slot_qsgmii_phyaddr[4][1]);
+ fm_info_set_phy_address(FM2_DTSEC3, slot_qsgmii_phyaddr[4][2]);
+ fm_info_set_phy_address(FM2_DTSEC4, slot_qsgmii_phyaddr[4][3]);
break;
case 56:
case 57:
/* XFI in Slot3, SGMII in Slot4 */
- fm_info_set_phy_address(FM1_10GEC1, XFI_CARD_PORT1_PHY_ADDR);
- fm_info_set_phy_address(FM1_10GEC2, XFI_CARD_PORT2_PHY_ADDR);
- fm_info_set_phy_address(FM2_10GEC2, XFI_CARD_PORT3_PHY_ADDR);
- fm_info_set_phy_address(FM2_10GEC1, XFI_CARD_PORT4_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC2, SGMII_CARD_PORT2_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC3, SGMII_CARD_PORT3_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC4, SGMII_CARD_PORT4_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC1, slot_qsgmii_phyaddr[4][0]);
+ fm_info_set_phy_address(FM2_DTSEC2, slot_qsgmii_phyaddr[4][1]);
+ fm_info_set_phy_address(FM2_DTSEC3, slot_qsgmii_phyaddr[4][2]);
+ fm_info_set_phy_address(FM2_DTSEC4, slot_qsgmii_phyaddr[4][3]);
break;
default:
puts("Invalid SerDes2 protocol for T4240QDS\n");
@@ -433,7 +656,7 @@
}
for (i = FM2_DTSEC1; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) {
- int idx = i - FM2_DTSEC1, lane, slot;
+ idx = i - FM2_DTSEC1;
switch (fm_info_get_enet_if(i)) {
case PHY_INTERFACE_MODE_SGMII:
lane = serdes_get_first_lane(FSL_SRDS_2,
@@ -477,8 +700,16 @@
}
for (i = FM2_10GEC1; i < FM2_10GEC1 + CONFIG_SYS_NUM_FM2_10GEC; i++) {
+ idx = i - FM2_10GEC1;
switch (fm_info_get_enet_if(i)) {
case PHY_INTERFACE_MODE_XGMII:
+ lane = serdes_get_first_lane(FSL_SRDS_2,
+ XAUI_FM2_MAC9 + idx);
+ if (lane < 0)
+ break;
+ slot = lane_to_slot_fsm2[lane];
+ if (QIXIS_READ(present2) & (1 << (slot - 1)))
+ fm_disable_port(i);
mdio_mux[i] = EMI2;
fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
break;
diff --git a/board/freescale/t4qds/law.c b/board/freescale/t4qds/law.c
index 6f2c5c8..f3848f3 100644
--- a/board/freescale/t4qds/law.c
+++ b/board/freescale/t4qds/law.c
@@ -37,7 +37,8 @@
#endif
SET_LAW(QIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_IFC),
#ifdef CONFIG_SYS_DCSRBAR_PHYS
- SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_DCSR),
+ /* Limit DCSR to 32M to access NPC Trace Buffer */
+ SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_DCSR),
#endif
#ifdef CONFIG_SYS_NAND_BASE_PHYS
SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_IFC),
diff --git a/board/freescale/t4qds/t4240qds_qixis.h b/board/freescale/t4qds/t4240qds_qixis.h
index efb718d..485353d 100644
--- a/board/freescale/t4qds/t4240qds_qixis.h
+++ b/board/freescale/t4qds/t4240qds_qixis.h
@@ -42,7 +42,7 @@
#define QIXIS_DDRCLK_125 0x2
#define QIXIS_DDRCLK_133 0x3
-#define BRDCFG5_RESET 0x00
+#define BRDCFG5_IRE 0x20 /* i2c Remote i2c1 enable */
#define BRDCFG12_SD3EN_MASK 0x20
#define BRDCFG12_SD3MX_MASK 0x08
diff --git a/board/freescale/t4qds/t4_pbi.cfg b/board/freescale/t4qds/t4_pbi.cfg
new file mode 100644
index 0000000..c598fb5
--- /dev/null
+++ b/board/freescale/t4qds/t4_pbi.cfg
@@ -0,0 +1,36 @@
+#PBI commands
+#Initialize CPC1
+09010000 00200400
+09138000 00000000
+091380c0 00000100
+#512KB SRAM
+09010100 00000000
+09010104 fff80009
+09010f00 08000000
+#enable CPC1
+09010000 80000000
+#Configure LAW for CPC1
+09000d00 00000000
+09000d04 fff80000
+09000d08 81000012
+#workaround for IFC bus speed
+091241c0 f03f3f3f
+091241c4 ff003f3f
+09124010 00000101
+09124130 0000000c
+#workaround for SERDES A-006031
+090ea000 064740e6
+090ea020 064740e6
+090eb000 064740e6
+090eb020 064740e6
+090ec000 064740e6
+090ec020 064740e6
+090ed000 064740e6
+090ed020 064740e6
+#Configure alternate space
+09000010 00000000
+09000014 ff000000
+09000018 81000000
+#Flush PBL data
+09138000 00000000
+091380c0 00000000
diff --git a/board/freescale/t4qds/t4_rcw.cfg b/board/freescale/t4qds/t4_rcw.cfg
new file mode 100644
index 0000000..6ac95ff
--- /dev/null
+++ b/board/freescale/t4qds/t4_rcw.cfg
@@ -0,0 +1,7 @@
+#PBL preamble and RCW header
+aa55aa55 010e0100
+#serdes protocol 1_28_6_12
+14180019 0c101916 00000000 00000000
+04383060 30548c00 6c020000 19000000
+00000000 ee0000ee 00000000 000187fc
+00000000 00000000 00000000 00000018
diff --git a/board/freescale/t4qds/t4qds.c b/board/freescale/t4qds/t4qds.c
index 3c95f3f..f0f280b 100644
--- a/board/freescale/t4qds/t4qds.c
+++ b/board/freescale/t4qds/t4qds.c
@@ -110,7 +110,7 @@
for (i = 0; i < MAX_SERDES; i++) {
static const char *freq[] = {
"100", "125", "156.25", "161.1328125"};
- unsigned int clock = (sw >> (2 * i)) & 3;
+ unsigned int clock = (sw >> (6 - 2 * i)) & 3;
printf("SERDES%u=%sMHz ", i+1, freq[clock]);
}
@@ -132,6 +132,243 @@
return 0;
}
+/*
+ * read_voltage from sensor on I2C bus
+ * We use average of 4 readings, waiting for 532us befor another reading
+ */
+#define NUM_READINGS 4 /* prefer to be power of 2 for efficiency */
+#define WAIT_FOR_ADC 532 /* wait for 532 microseconds for ADC */
+
+static inline int read_voltage(void)
+{
+ int i, ret, voltage_read = 0;
+ u16 vol_mon;
+
+ for (i = 0; i < NUM_READINGS; i++) {
+ ret = i2c_read(I2C_VOL_MONITOR_ADDR,
+ I2C_VOL_MONITOR_BUS_V_OFFSET, 1, (void *)&vol_mon, 2);
+ if (ret) {
+ printf("VID: failed to read core voltage\n");
+ return ret;
+ }
+ if (vol_mon & I2C_VOL_MONITOR_BUS_V_OVF) {
+ printf("VID: Core voltage sensor error\n");
+ return -1;
+ }
+ debug("VID: bus voltage reads 0x%04x\n", vol_mon);
+ /* LSB = 4mv */
+ voltage_read += (vol_mon >> I2C_VOL_MONITOR_BUS_V_SHIFT) * 4;
+ udelay(WAIT_FOR_ADC);
+ }
+ /* calculate the average */
+ voltage_read /= NUM_READINGS;
+
+ return voltage_read;
+}
+
+/*
+ * We need to calculate how long before the voltage starts to drop or increase
+ * It returns with the loop count. Each loop takes several readings (532us)
+ */
+static inline int wait_for_voltage_change(int vdd_last)
+{
+ int timeout, vdd_current;
+
+ vdd_current = read_voltage();
+ /* wait until voltage starts to drop */
+ for (timeout = 0; abs(vdd_last - vdd_current) <= 4 &&
+ timeout < 100; timeout++) {
+ vdd_current = read_voltage();
+ }
+ if (timeout >= 100) {
+ printf("VID: Voltage adjustment timeout\n");
+ return -1;
+ }
+ return timeout;
+}
+
+/*
+ * argument 'wait' is the time we know the voltage difference can be measured
+ * this function keeps reading the voltage until it is stable
+ */
+static inline int wait_for_voltage_stable(int wait)
+{
+ int timeout, vdd_current, vdd_last;
+
+ vdd_last = read_voltage();
+ udelay(wait * NUM_READINGS * WAIT_FOR_ADC);
+ /* wait until voltage is stable */
+ vdd_current = read_voltage();
+ for (timeout = 0; abs(vdd_last - vdd_current) >= 4 &&
+ timeout < 100; timeout++) {
+ vdd_last = vdd_current;
+ udelay(wait * NUM_READINGS * WAIT_FOR_ADC);
+ vdd_current = read_voltage();
+ }
+ if (timeout >= 100) {
+ printf("VID: Voltage adjustment timeout\n");
+ return -1;
+ }
+
+ return vdd_current;
+}
+
+static inline int set_voltage(u8 vid)
+{
+ int wait, vdd_last;
+
+ vdd_last = read_voltage();
+ QIXIS_WRITE(brdcfg[6], vid);
+ wait = wait_for_voltage_change(vdd_last);
+ if (wait < 0)
+ return -1;
+ debug("VID: Waited %d us\n", wait * NUM_READINGS * WAIT_FOR_ADC);
+ wait = wait ? wait : 1;
+
+ vdd_last = wait_for_voltage_stable(wait);
+ if (vdd_last < 0)
+ return -1;
+ debug("VID: Current voltage is %d mV\n", vdd_last);
+
+ return vdd_last;
+}
+
+
+static int adjust_vdd(ulong vdd_override)
+{
+ int re_enable = disable_interrupts();
+ ccsr_gur_t __iomem *gur =
+ (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 fusesr;
+ u8 vid, vid_current;
+ int vdd_target, vdd_current, vdd_last;
+ int ret;
+ unsigned long vdd_string_override;
+ char *vdd_string;
+ static const uint16_t vdd[32] = {
+ 0, /* unused */
+ 9875, /* 0.9875V */
+ 9750,
+ 9625,
+ 9500,
+ 9375,
+ 9250,
+ 9125,
+ 9000,
+ 8875,
+ 8750,
+ 8625,
+ 8500,
+ 8375,
+ 8250,
+ 8125,
+ 10000, /* 1.0000V */
+ 10125,
+ 10250,
+ 10375,
+ 10500,
+ 10625,
+ 10750,
+ 10875,
+ 11000,
+ 0, /* reserved */
+ };
+ struct vdd_drive {
+ u8 vid;
+ unsigned voltage;
+ };
+
+ ret = select_i2c_ch_pca9547(I2C_MUX_CH_VOL_MONITOR);
+ if (ret) {
+ debug("VID: I2c failed to switch channel\n");
+ ret = -1;
+ goto exit;
+ }
+
+ /* get the voltage ID from fuse status register */
+ fusesr = in_be32(&gur->dcfg_fusesr);
+ vid = (fusesr >> FSL_CORENET_DCFG_FUSESR_VID_SHIFT) &
+ FSL_CORENET_DCFG_FUSESR_VID_MASK;
+ if (vid == FSL_CORENET_DCFG_FUSESR_VID_MASK) {
+ vid = (fusesr >> FSL_CORENET_DCFG_FUSESR_ALTVID_SHIFT) &
+ FSL_CORENET_DCFG_FUSESR_ALTVID_MASK;
+ }
+ vdd_target = vdd[vid];
+
+ /* check override variable for overriding VDD */
+ vdd_string = getenv("t4240qds_vdd_mv");
+ if (vdd_override == 0 && vdd_string &&
+ !strict_strtoul(vdd_string, 10, &vdd_string_override))
+ vdd_override = vdd_string_override;
+ if (vdd_override >= 819 && vdd_override <= 1212) {
+ vdd_target = vdd_override * 10; /* convert to 1/10 mV */
+ debug("VDD override is %lu\n", vdd_override);
+ } else if (vdd_override != 0) {
+ printf("Invalid value.\n");
+ }
+
+ if (vdd_target == 0) {
+ debug("VID: VID not used\n");
+ ret = 0;
+ goto exit;
+ } else {
+ /* round up and divice by 10 to get a value in mV */
+ vdd_target = DIV_ROUND_UP(vdd_target, 10);
+ debug("VID: vid = %d mV\n", vdd_target);
+ }
+
+ /*
+ * Check current board VID setting
+ * Voltage regulator support output to 6.250mv step
+ * The highes voltage allowed for this board is (vid=0x40) 1.21250V
+ * the lowest is (vid=0x7f) 0.81875V
+ */
+ vid_current = QIXIS_READ(brdcfg[6]);
+ vdd_current = 121250 - (vid_current - 0x40) * 625;
+ debug("VID: Current vid setting is (0x%x) %d mV\n",
+ vid_current, vdd_current/100);
+
+ /*
+ * Read voltage monitor to check real voltage.
+ * Voltage monitor LSB is 4mv.
+ */
+ vdd_last = read_voltage();
+ if (vdd_last < 0) {
+ printf("VID: Could not read voltage sensor abort VID adjustment\n");
+ ret = -1;
+ goto exit;
+ }
+ debug("VID: Core voltage is at %d mV\n", vdd_last);
+ /*
+ * Adjust voltage to at or 8mV above target.
+ * Each step of adjustment is 6.25mV.
+ * Stepping down too fast may cause over current.
+ */
+ while (vdd_last > 0 && vid_current < 0x80 &&
+ vdd_last > (vdd_target + 8)) {
+ vid_current++;
+ vdd_last = set_voltage(vid_current);
+ }
+ /*
+ * Check if we need to step up
+ * This happens when board voltage switch was set too low
+ */
+ while (vdd_last > 0 && vid_current >= 0x40 &&
+ vdd_last < vdd_target + 2) {
+ vid_current--;
+ vdd_last = set_voltage(vid_current);
+ }
+ if (vdd_last > 0)
+ printf("VID: Core voltage %d mV\n", vdd_last);
+ else
+ ret = -1;
+
+exit:
+ if (re_enable)
+ enable_interrupts();
+ return ret;
+}
+
/* Configure Crossbar switches for Front-Side SerDes Ports */
int config_frontside_crossbar_vsc3316(void)
{
@@ -282,8 +519,15 @@
setup_portals();
#endif
- /* Disable remote I2C connectoin */
- QIXIS_WRITE(brdcfg[5], BRDCFG5_RESET);
+ /* Disable remote I2C connection to qixis fpga */
+ QIXIS_WRITE(brdcfg[5], QIXIS_READ(brdcfg[5]) & ~BRDCFG5_IRE);
+
+ /*
+ * Adjust core voltage according to voltage ID
+ * This function changes I2C mux to channel 2.
+ */
+ if (adjust_vdd(0))
+ printf("Warning: Adjusting core voltage failed.\n");
/* Configure board SERDES ports crossbar */
config_frontside_crossbar_vsc3316();
@@ -296,6 +540,20 @@
unsigned long get_board_sys_clk(void)
{
u8 sysclk_conf = QIXIS_READ(brdcfg[1]);
+#ifdef CONFIG_FSL_QIXIS_CLOCK_MEASUREMENT
+ /* use accurate clock measurement */
+ int freq = QIXIS_READ(clk_freq[0]) << 8 | QIXIS_READ(clk_freq[1]);
+ int base = QIXIS_READ(clk_base[0]) << 8 | QIXIS_READ(clk_base[1]);
+ u32 val;
+
+ val = freq * base;
+ if (val) {
+ debug("SYS Clock measurement is: %d\n", val);
+ return val;
+ } else {
+ printf("Warning: SYS clock measurement is invalid, using value from brdcfg1.\n");
+ }
+#endif
switch (sysclk_conf & 0x0F) {
case QIXIS_SYSCLK_83:
@@ -319,6 +577,20 @@
unsigned long get_board_ddr_clk(void)
{
u8 ddrclk_conf = QIXIS_READ(brdcfg[1]);
+#ifdef CONFIG_FSL_QIXIS_CLOCK_MEASUREMENT
+ /* use accurate clock measurement */
+ int freq = QIXIS_READ(clk_freq[2]) << 8 | QIXIS_READ(clk_freq[3]);
+ int base = QIXIS_READ(clk_base[0]) << 8 | QIXIS_READ(clk_base[1]);
+ u32 val;
+
+ val = freq * base;
+ if (val) {
+ debug("DDR Clock measurement is: %d\n", val);
+ return val;
+ } else {
+ printf("Warning: DDR clock measurement is invalid, using value from brdcfg1.\n");
+ }
+#endif
switch ((ddrclk_conf & 0x30) >> 4) {
case QIXIS_DDRCLK_100:
@@ -357,7 +629,7 @@
sw = QIXIS_READ(brdcfg[2]);
for (i = 0; i < MAX_SERDES; i++) {
- unsigned int clock = (sw >> (2 * i)) & 3;
+ unsigned int clock = (sw >> (6 - 2 * i)) & 3;
switch (clock) {
case 0:
actual[i] = SRDS_PLLCR0_RFCK_SEL_100;
@@ -414,6 +686,106 @@
}
/*
+ * This function is called by bdinfo to print detail board information.
+ * As an exmaple for future board, we organize the messages into
+ * several sections. If applicable, the message is in the format of
+ * <name> = <value>
+ * It should aligned with normal output of bdinfo command.
+ *
+ * Voltage: Core, DDR and another configurable voltages
+ * Clock : Critical clocks which are not printed already
+ * RCW : RCW source if not printed already
+ * Misc : Other important information not in above catagories
+ */
+void board_detail(void)
+{
+ int i;
+ u8 brdcfg[16], dutcfg[16], rst_ctl;
+ int vdd, rcwsrc;
+ static const char * const clk[] = {"66.67", "100", "125", "133.33"};
+
+ for (i = 0; i < 16; i++) {
+ brdcfg[i] = qixis_read(offsetof(struct qixis, brdcfg[0]) + i);
+ dutcfg[i] = qixis_read(offsetof(struct qixis, dutcfg[0]) + i);
+ }
+
+ /* Voltage secion */
+ if (!select_i2c_ch_pca9547(I2C_MUX_CH_VOL_MONITOR)) {
+ vdd = read_voltage();
+ if (vdd > 0)
+ printf("Core voltage= %d mV\n", vdd);
+ select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+ }
+
+ printf("XVDD = 1.%d V\n", ((brdcfg[8] & 0xf) - 4) * 5 + 25);
+
+ /* clock section */
+ printf("SYSCLK = %s MHz\nDDRCLK = %s MHz\n",
+ clk[(brdcfg[11] >> 2) & 0x3], clk[brdcfg[11] & 3]);
+
+ /* RCW section */
+ rcwsrc = (dutcfg[0] << 1) + (dutcfg[1] & 1);
+ puts("RCW source = ");
+ switch (rcwsrc) {
+ case 0x017:
+ case 0x01f:
+ puts("8-bit NOR\n");
+ break;
+ case 0x027:
+ case 0x02F:
+ puts("16-bit NOR\n");
+ break;
+ case 0x040:
+ puts("SDHC/eMMC\n");
+ break;
+ case 0x044:
+ puts("SPI 16-bit addressing\n");
+ break;
+ case 0x045:
+ puts("SPI 24-bit addressing\n");
+ break;
+ case 0x048:
+ puts("I2C normal addressing\n");
+ break;
+ case 0x049:
+ puts("I2C extended addressing\n");
+ break;
+ case 0x108:
+ case 0x109:
+ case 0x10a:
+ case 0x10b:
+ puts("8-bit NAND, 2KB\n");
+ break;
+ default:
+ if ((rcwsrc >= 0x080) && (rcwsrc <= 0x09f))
+ puts("Hard-coded RCW\n");
+ else if ((rcwsrc >= 0x110) && (rcwsrc <= 0x11f))
+ puts("8-bit NAND, 4KB\n");
+ else
+ puts("unknown\n");
+ break;
+ }
+
+ /* Misc section */
+ rst_ctl = QIXIS_READ(rst_ctl);
+ puts("HRESET_REQ = ");
+ switch (rst_ctl & 0x30) {
+ case 0x00:
+ puts("Ignored\n");
+ break;
+ case 0x10:
+ puts("Assert HRESET\n");
+ break;
+ case 0x30:
+ puts("Reset system\n");
+ break;
+ default:
+ puts("N/A\n");
+ break;
+ }
+}
+
+/*
* Reverse engineering switch settings.
* Some bits cannot be figured out. They will be displayed as
* underscore in binary format. mask[] has those bits.
@@ -429,7 +801,7 @@
* Any bit with 1 means that bit cannot be reverse engineered.
* It will be displayed as _ in binary format.
*/
- static const u8 mask[] = {0, 0, 0, 0, 0, 0x1, 0xdf, 0x3f, 0x1f};
+ static const u8 mask[] = {0, 0, 0, 0, 0, 0x1, 0xcf, 0x3f, 0x1f};
char buf[10];
u8 brdcfg[16], dutcfg[16];
@@ -460,7 +832,8 @@
sw[5] = ((brdcfg[0] & 0x0f) << 4) | \
((QIXIS_READ(rst_ctl) & 0x30) >> 2) | \
((brdcfg[0] & 0x40) >> 5);
- sw[6] = (brdcfg[11] & 0x20);
+ sw[6] = (brdcfg[11] & 0x20) |
+ ((brdcfg[5] & 0x02) << 3);
sw[7] = (((~QIXIS_READ(rst_ctl)) & 0x40) << 1) | \
((brdcfg[5] & 0x10) << 2);
sw[8] = ((brdcfg[12] & 0x08) << 4) | \
@@ -472,3 +845,23 @@
i + 1, byte_to_binary_mask(sw[i], mask[i], buf), sw[i]);
}
}
+
+static int do_vdd_adjust(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ ulong override;
+
+ if (argc < 2)
+ return CMD_RET_USAGE;
+ if (!strict_strtoul(argv[1], 10, &override))
+ adjust_vdd(override); /* the value is checked by callee */
+ else
+ return CMD_RET_USAGE;
+
+ return 0;
+}
+
+U_BOOT_CMD(
+ vdd_override, 2, 0, do_vdd_adjust,
+ "Override VDD",
+ "- override with the voltage specified in mV, eg. 1050"
+);
diff --git a/board/freescale/t4qds/tlb.c b/board/freescale/t4qds/tlb.c
index 80eb511..92c01cf 100644
--- a/board/freescale/t4qds/tlb.c
+++ b/board/freescale/t4qds/tlb.c
@@ -115,7 +115,7 @@
#ifdef CONFIG_SYS_DCSRBAR_PHYS
SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 13, BOOKE_PAGESZ_4M, 1),
+ 0, 13, BOOKE_PAGESZ_32M, 1),
#endif
#ifdef CONFIG_SYS_NAND_BASE
/*
diff --git a/board/genesi/mx51_efikamx/imximage_mx.cfg b/board/genesi/mx51_efikamx/imximage_mx.cfg
index 21ff6d6..0173535 100644
--- a/board/genesi/mx51_efikamx/imximage_mx.cfg
+++ b/board/genesi/mx51_efikamx/imximage_mx.cfg
@@ -26,7 +26,7 @@
* Foundation Inc. 51 Franklin Street Fifth Floor Boston,
* MA 02110-1301 USA
*
- * Refer docs/README.imxmage for more details about how-to configure
+ * Refer doc/README.imximage for more details about how-to configure
* and create imximage boot image
*
* The syntax is taken as close as possible with the kwbimage
diff --git a/board/genesi/mx51_efikamx/imximage_sb.cfg b/board/genesi/mx51_efikamx/imximage_sb.cfg
index 7ddd0b1..5c46769 100644
--- a/board/genesi/mx51_efikamx/imximage_sb.cfg
+++ b/board/genesi/mx51_efikamx/imximage_sb.cfg
@@ -26,7 +26,7 @@
* Foundation Inc. 51 Franklin Street Fifth Floor Boston,
* MA 02110-1301 USA
*
- * Refer docs/README.imxmage for more details about how-to configure
+ * Refer doc/README.imximage for more details about how-to configure
* and create imximage boot image
*
* The syntax is taken as close as possible with the kwbimage
diff --git a/board/htkw/mcx/mcx.c b/board/htkw/mcx/mcx.c
index 923461a..7f0330d 100644
--- a/board/htkw/mcx/mcx.c
+++ b/board/htkw/mcx/mcx.c
@@ -28,7 +28,7 @@
#include <asm/gpio.h>
#include <asm/omap_gpio.h>
#include <asm/arch/dss.h>
-#include <asm/arch/clocks.h>
+#include <asm/arch/clock.h>
#include "errno.h"
#include <i2c.h>
#ifdef CONFIG_USB_EHCI
diff --git a/board/alaska/Makefile b/board/icpdas/lp8x4x/Makefile
similarity index 79%
rename from board/alaska/Makefile
rename to board/icpdas/lp8x4x/Makefile
index a21f851..cbe6aa9 100644
--- a/board/alaska/Makefile
+++ b/board/icpdas/lp8x4x/Makefile
@@ -1,9 +1,7 @@
#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+# ICPDAS LP-8x4x Support
#
-# See file CREDITS for list of people who contributed to this
-# project.
+# Copyright (C) 2013 Sergey Yanovich <ynvich@gmail.com>
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
@@ -25,13 +23,12 @@
LIB = $(obj)lib$(BOARD).o
-COBJS := $(BOARD).o flash.o
+COBJS := lp8x4x.o
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
$(call cmd_link_o_target, $(OBJS))
#########################################################################
diff --git a/board/icpdas/lp8x4x/lp8x4x.c b/board/icpdas/lp8x4x/lp8x4x.c
new file mode 100644
index 0000000..76f0700
--- /dev/null
+++ b/board/icpdas/lp8x4x/lp8x4x.c
@@ -0,0 +1,147 @@
+/*
+ * ICP DAS LP-8x4x Support
+ *
+ * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
+ * adapted from Voipac PXA270 Support by
+ * Copyright (C) 2013 Sergey Yanovich <ynvich@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/regs-mmc.h>
+#include <asm/arch/pxa.h>
+#include <netdev.h>
+#include <serial.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+int board_init(void)
+{
+ /* We have RAM, disable cache */
+ dcache_disable();
+ icache_disable();
+
+ /* memory and cpu-speed are setup before relocation */
+ /* so we do _nothing_ here */
+
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = 0xa0000100;
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ pxa2xx_dram_init();
+ gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
+ return 0;
+}
+
+void dram_init_banksize(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+}
+
+#ifdef CONFIG_CMD_MMC
+int board_mmc_init(bd_t *bis)
+{
+ pxa_mmc_register(0);
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_CMD_USB
+int usb_board_init(void)
+{
+ writel((UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
+ ~(UHCHR_SSEP0 | UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE),
+ UHCHR);
+
+ writel(readl(UHCHR) | UHCHR_FSBIR, UHCHR);
+
+ while (readl(UHCHR) & UHCHR_FSBIR)
+ continue; /* required by checkpath.pl */
+
+ writel(readl(UHCHR) & ~UHCHR_SSE, UHCHR);
+ writel((UHCHIE_UPRIE | UHCHIE_RWIE), UHCHIE);
+
+ /* Clear any OTG Pin Hold */
+ if (readl(PSSR) & PSSR_OTGPH)
+ writel(readl(PSSR) | PSSR_OTGPH, PSSR);
+
+ writel(readl(UHCRHDA) & ~(0x200), UHCRHDA);
+ writel(readl(UHCRHDA) | 0x100, UHCRHDA);
+
+ /* Set port power control mask bits, only 3 ports. */
+ writel(readl(UHCRHDB) | (0x7<<17), UHCRHDB);
+
+ /* enable port 2 */
+ writel(readl(UP2OCR) | UP2OCR_HXOE | UP2OCR_HXS |
+ UP2OCR_DMPDE | UP2OCR_DPPDE, UP2OCR);
+
+ return 0;
+}
+
+void usb_board_init_fail(void)
+{
+ return;
+}
+
+void usb_board_stop(void)
+{
+ writel(readl(UHCHR) | UHCHR_FHR, UHCHR);
+ udelay(11);
+ writel(readl(UHCHR) & ~UHCHR_FHR, UHCHR);
+
+ writel(readl(UHCCOMS) | 1, UHCCOMS);
+ udelay(10);
+
+ writel(readl(CKEN) & ~CKEN10_USBHOST, CKEN);
+
+ return;
+}
+#endif
+
+#ifdef CONFIG_DRIVER_DM9000
+void lp8x4x_eth1_mac_init(void)
+{
+ u8 eth1addr[8];
+ int i;
+ u8 reg;
+
+ eth_getenv_enetaddr_by_index("eth", 1, eth1addr);
+ if (!is_valid_ether_addr(eth1addr))
+ return;
+
+ for (i = 0, reg = 0x10; i < 6; i++, reg++) {
+ writeb(reg, (u8 *)(DM9000_IO_2));
+ writeb(eth1addr[i], (u8 *)(DM9000_DATA_2));
+ }
+}
+
+int board_eth_init(bd_t *bis)
+{
+ lp8x4x_eth1_mac_init();
+ return dm9000_initialize(bis);
+}
+#endif
diff --git a/board/iomega/iconnect/kwbimage.cfg b/board/iomega/iconnect/kwbimage.cfg
index 4b64dab..1b66207 100644
--- a/board/iomega/iconnect/kwbimage.cfg
+++ b/board/iomega/iconnect/kwbimage.cfg
@@ -19,7 +19,7 @@
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
#
-# Refer docs/README.kwimage for more details about how-to configure
+# Refer doc/README.kwbimage for more details about how-to configure
# and create kirkwood boot image
#
diff --git a/board/isee/igep0033/board.c b/board/isee/igep0033/board.c
index d315516..ea3bea5 100644
--- a/board/isee/igep0033/board.c
+++ b/board/isee/igep0033/board.c
@@ -36,37 +36,13 @@
DECLARE_GLOBAL_DATA_PTR;
static struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE;
-#ifdef CONFIG_SPL_BUILD
-static struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE;
-#endif
/* MII mode defines */
#define RMII_MODE_ENABLE 0x4D
static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
-/* UART Defines */
#ifdef CONFIG_SPL_BUILD
-#define UART_RESET (0x1 << 1)
-#define UART_CLK_RUNNING_MASK 0x1
-#define UART_SMART_IDLE_EN (0x1 << 0x3)
-
-static void rtc32k_enable(void)
-{
- struct rtc_regs *rtc = (struct rtc_regs *)RTC_BASE;
-
- /*
- * Unlock the RTC's registers. For more details please see the
- * RTC_SS section of the TRM. In order to unlock we need to
- * write these specific values (keys) in this order.
- */
- writel(0x83e70b13, &rtc->kick0r);
- writel(0x95a4f1e0, &rtc->kick1r);
-
- /* Enable the RTC 32K OSC by setting bits 3 and 6. */
- writel((1 << 3) | (1 << 6), &rtc->osc);
-}
-
static const struct ddr_data ddr3_data = {
.datardsratio0 = K4B2G1646EBIH9_RD_DQS,
.datawdsratio0 = K4B2G1646EBIH9_WR_DQS,
@@ -105,6 +81,15 @@
*/
void s_init(void)
{
+ /*
+ * Save the boot parameters passed from romcode.
+ * We cannot delay the saving further than this,
+ * to prevent overwrites.
+ */
+#ifdef CONFIG_SPL_BUILD
+ save_omap_boot_params();
+#endif
+
/* WDT1 is already running when the bootloader gets control
* Disable it to avoid "random" resets
*/
@@ -122,23 +107,9 @@
/* Enable RTC32K clock */
rtc32k_enable();
- /* UART softreset */
- u32 regval;
-
enable_uart0_pin_mux();
- regval = readl(&uart_base->uartsyscfg);
- regval |= UART_RESET;
- writel(regval, &uart_base->uartsyscfg);
- while ((readl(&uart_base->uartsyssts) &
- UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK)
- ;
-
- /* Disable smart idle */
- regval = readl(&uart_base->uartsyscfg);
- regval |= UART_SMART_IDLE_EN;
- writel(regval, &uart_base->uartsyscfg);
-
+ uart_soft_reset();
gd = &gdata;
preloader_console_init();
diff --git a/board/karo/tk71/kwbimage.cfg b/board/karo/tk71/kwbimage.cfg
index 0166826..9a9cf9d 100644
--- a/board/karo/tk71/kwbimage.cfg
+++ b/board/karo/tk71/kwbimage.cfg
@@ -24,7 +24,7 @@
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
# MA 02110-1301 USA
#
-# Refer docs/README.kwimage for more details about how-to configure
+# Refer doc/README.kwbimage for more details about how-to configure
# and create kirkwood boot image
#
diff --git a/board/karo/tx25/tx25.c b/board/karo/tx25/tx25.c
index 2952eba..461e21f 100644
--- a/board/karo/tx25/tx25.c
+++ b/board/karo/tx25/tx25.c
@@ -35,7 +35,21 @@
#ifdef CONFIG_SPL_BUILD
void board_init_f(ulong bootflag)
{
- relocate_code(CONFIG_SPL_TEXT_BASE);
+ /*
+ * copy ourselves from where we are running to where we were
+ * linked at. Use ulong pointers as all addresses involved
+ * are 4-byte-aligned.
+ */
+ ulong *start_ptr, *end_ptr, *link_ptr, *run_ptr, *dst;
+ asm volatile ("ldr %0, =_start" : "=r"(start_ptr));
+ asm volatile ("ldr %0, =_end" : "=r"(end_ptr));
+ asm volatile ("ldr %0, =board_init_f" : "=r"(link_ptr));
+ asm volatile ("adr %0, board_init_f" : "=r"(run_ptr));
+ for (dst = start_ptr; dst < end_ptr; dst++)
+ *dst = *(dst+(run_ptr-link_ptr));
+ /*
+ * branch to nand_boot's link-time address.
+ */
asm volatile("ldr pc, =nand_boot");
}
#endif
diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c
index eda9199..b944887 100644
--- a/board/keymile/km_arm/km_arm.c
+++ b/board/keymile/km_arm/km_arm.c
@@ -160,7 +160,7 @@
}
#endif
-int initialize_unit_leds(void)
+static int initialize_unit_leds(void)
{
/*
* Init the unit LEDs per default they all are
@@ -181,7 +181,7 @@
}
#if defined(CONFIG_BOOTCOUNT_LIMIT)
-void set_bootcount_addr(void)
+static void set_bootcount_addr(void)
{
uchar buf[32];
unsigned int bootcountaddr;
diff --git a/board/keymile/km_arm/kwbimage-memphis.cfg b/board/keymile/km_arm/kwbimage-memphis.cfg
index 5aa0de2..63822a5 100644
--- a/board/keymile/km_arm/kwbimage-memphis.cfg
+++ b/board/keymile/km_arm/kwbimage-memphis.cfg
@@ -23,7 +23,7 @@
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
# MA 02110-1301 USA
#
-# Refer docs/README.kwimage for more details about how-to configure
+# Refer doc/README.kwbimage for more details about how-to configure
# and create kirkwood boot image
#
diff --git a/board/keymile/km_arm/kwbimage.cfg b/board/keymile/km_arm/kwbimage.cfg
index e5e9942..d941d7e 100644
--- a/board/keymile/km_arm/kwbimage.cfg
+++ b/board/keymile/km_arm/kwbimage.cfg
@@ -20,7 +20,7 @@
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
# MA 02110-1301 USA
#
-# Refer docs/README.kwimage for more details about how-to configure
+# Refer doc/README.kwbimage for more details about how-to configure
# and create kirkwood boot image
#
diff --git a/board/keymile/km_arm/kwbimage_128M16_1.cfg b/board/keymile/km_arm/kwbimage_128M16_1.cfg
index 5de8df7..4c31a0d 100644
--- a/board/keymile/km_arm/kwbimage_128M16_1.cfg
+++ b/board/keymile/km_arm/kwbimage_128M16_1.cfg
@@ -25,7 +25,7 @@
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
# MA 02110-1301 USA
#
-# Refer docs/README.kwimage for more details about how-to configure
+# Refer doc/README.kwbimage for more details about how-to configure
# and create kirkwood boot image
#
diff --git a/board/keymile/km_arm/kwbimage_256M8_1.cfg b/board/keymile/km_arm/kwbimage_256M8_1.cfg
index d0a09f6..31b9203 100644
--- a/board/keymile/km_arm/kwbimage_256M8_1.cfg
+++ b/board/keymile/km_arm/kwbimage_256M8_1.cfg
@@ -22,7 +22,7 @@
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
# MA 02110-1301 USA
#
-# Refer docs/README.kwimage for more details about how-to configure
+# Refer doc/README.kwbimage for more details about how-to configure
# and create kirkwood boot image
#
# This configuration applies to COGE5 design (ARM-part)
diff --git a/board/nvidia/beaver/Makefile b/board/nvidia/beaver/Makefile
new file mode 100644
index 0000000..9510f60
--- /dev/null
+++ b/board/nvidia/beaver/Makefile
@@ -0,0 +1,38 @@
+#
+# Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms and conditions of the GNU General Public License,
+# version 2, as published by the Free Software Foundation.
+#
+# This program is distributed in the hope it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+# more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+
+include $(TOPDIR)/config.mk
+
+$(shell mkdir -p $(obj)../cardhu)
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS = ../cardhu/cardhu.o
+
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c
index 8d7a227..f60f21f 100644
--- a/board/nvidia/common/board.c
+++ b/board/nvidia/common/board.c
@@ -47,6 +47,7 @@
#endif
#ifdef CONFIG_USB_EHCI_TEGRA
#include <asm/arch-tegra/usb.h>
+#include <asm/arch/usb.h>
#endif
#ifdef CONFIG_TEGRA_MMC
#include <asm/arch-tegra/tegra_mmc.h>
diff --git a/board/nvidia/dts/tegra114-dalmore.dts b/board/nvidia/dts/tegra114-dalmore.dts
index 86e9459..435c01e 100644
--- a/board/nvidia/dts/tegra114-dalmore.dts
+++ b/board/nvidia/dts/tegra114-dalmore.dts
@@ -14,6 +14,7 @@
i2c4 = "/i2c@7000c700";
sdhci0 = "/sdhci@78000600";
sdhci1 = "/sdhci@78000400";
+ usb0 = "/usb@7d008000";
};
memory {
@@ -61,4 +62,10 @@
bus-width = <8>;
status = "okay";
};
+
+ usb@7d008000 {
+ /* SPDIF_IN: USB_VBUS_EN1 */
+ nvidia,vbus-gpio = <&gpio 86 0>;
+ status = "okay";
+ };
};
diff --git a/board/nvidia/dts/tegra20-harmony.dts b/board/nvidia/dts/tegra20-harmony.dts
index 7934e4a..b115f87 100644
--- a/board/nvidia/dts/tegra20-harmony.dts
+++ b/board/nvidia/dts/tegra20-harmony.dts
@@ -17,6 +17,17 @@
reg = <0x00000000 0x40000000>;
};
+ host1x {
+ status = "okay";
+ dc@54200000 {
+ status = "okay";
+ rgb {
+ status = "okay";
+ nvidia,panel = <&lcd_panel>;
+ };
+ };
+ };
+
serial@70006300 {
clock-frequency = < 216000000 >;
};
@@ -70,4 +81,25 @@
power-gpios = <&gpio 70 0>; /* gpio PI6 */
bus-width = <8>;
};
+
+ lcd_panel: panel {
+ clock = <42430000>;
+ xres = <1024>;
+ yres = <600>;
+ left-margin = <138>;
+ right-margin = <34>;
+ hsync-len = <136>;
+ lower-margin = <4>;
+ upper-margin = <21>;
+ vsync-len = <4>;
+ hsync-active-high;
+ vsyncx-active-high;
+ nvidia,bits-per-pixel = <16>;
+ nvidia,pwm = <&pwm 0 0>;
+ nvidia,backlight-enable-gpios = <&gpio 13 0>; /* PB5 */
+ nvidia,lvds-shutdown-gpios = <&gpio 10 0>; /* PB2 */
+ nvidia,backlight-vdd-gpios = <&gpio 176 0>; /* PW0 */
+ nvidia,panel-vdd-gpios = <&gpio 22 0>; /* PC6 */
+ nvidia,panel-timings = <0 0 200 0 0>;
+ };
};
diff --git a/board/nvidia/dts/tegra20-ventana.dts b/board/nvidia/dts/tegra20-ventana.dts
index e1a3d1e..1a526ba 100644
--- a/board/nvidia/dts/tegra20-ventana.dts
+++ b/board/nvidia/dts/tegra20-ventana.dts
@@ -16,6 +16,17 @@
reg = <0x00000000 0x40000000>;
};
+ host1x {
+ status = "okay";
+ dc@54200000 {
+ status = "okay";
+ rgb {
+ status = "okay";
+ nvidia,panel = <&lcd_panel>;
+ };
+ };
+ };
+
serial@70006300 {
clock-frequency = < 216000000 >;
};
@@ -56,4 +67,25 @@
status = "okay";
bus-width = <8>;
};
+
+ lcd_panel: panel {
+ clock = <72072000>;
+ xres = <1366>;
+ yres = <768>;
+ left-margin = <58>;
+ right-margin = <58>;
+ hsync-len = <58>;
+ lower-margin = <4>;
+ upper-margin = <4>;
+ vsync-len = <4>;
+ hsync-active-high;
+ vsync-active-high;
+ nvidia,bits-per-pixel = <16>;
+ nvidia,pwm = <&pwm 2 0>;
+ nvidia,backlight-enable-gpios = <&gpio 28 0>; /* PD4 */
+ nvidia,lvds-shutdown-gpios = <&gpio 10 0>; /* PB2 */
+ nvidia,backlight-vdd-gpios = <&gpio 176 0>; /* PW0 */
+ nvidia,panel-vdd-gpios = <&gpio 22 0>; /* PC6 */
+ nvidia,panel-timings = <0 0 200 0 0>;
+ };
};
diff --git a/board/nvidia/dts/tegra30-beaver.dts b/board/nvidia/dts/tegra30-beaver.dts
index 836169f..a7cc93e 100644
--- a/board/nvidia/dts/tegra30-beaver.dts
+++ b/board/nvidia/dts/tegra30-beaver.dts
@@ -14,6 +14,7 @@
i2c4 = "/i2c@7000c700";
sdhci0 = "/sdhci@78000600";
sdhci1 = "/sdhci@78000000";
+ usb0 = "/usb@7d008000";
};
memory {
@@ -68,4 +69,9 @@
status = "okay";
bus-width = <8>;
};
+
+ usb@7d008000 {
+ nvidia,vbus-gpio = <&gpio 236 0>; /* PDD4 */
+ status = "okay";
+ };
};
diff --git a/board/nvidia/dts/tegra30-cardhu.dts b/board/nvidia/dts/tegra30-cardhu.dts
index 4d22b48..ea2cf76 100644
--- a/board/nvidia/dts/tegra30-cardhu.dts
+++ b/board/nvidia/dts/tegra30-cardhu.dts
@@ -14,6 +14,7 @@
i2c4 = "/i2c@7000c700";
sdhci0 = "/sdhci@78000600";
sdhci1 = "/sdhci@78000000";
+ usb0 = "/usb@7d008000";
};
memory {
@@ -63,4 +64,9 @@
status = "okay";
bus-width = <8>;
};
+
+ usb@7d008000 {
+ nvidia,vbus-gpio = <&gpio 236 0>; /* PDD4 */
+ status = "okay";
+ };
};
diff --git a/board/nvidia/harmony/harmony.c b/board/nvidia/harmony/harmony.c
index 3122441..dd8f99a 100644
--- a/board/nvidia/harmony/harmony.c
+++ b/board/nvidia/harmony/harmony.c
@@ -22,6 +22,7 @@
*/
#include <common.h>
+#include <lcd.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/funcmux.h>
@@ -59,3 +60,9 @@
/* USB2 PHY reset GPIO */
pinmux_tristate_disable(PINGRP_UAC);
}
+
+void pin_mux_display(void)
+{
+ pinmux_set_func(PINGRP_SDC, PMUX_FUNC_PWM);
+ pinmux_tristate_disable(PINGRP_SDC);
+}
diff --git a/board/palmtreo680/Makefile b/board/palmtreo680/Makefile
new file mode 100644
index 0000000..34ffb99
--- /dev/null
+++ b/board/palmtreo680/Makefile
@@ -0,0 +1,34 @@
+#
+# Palm Treo680 Support
+#
+# Copyright (C) 2013 Mike Dunn <mikedunn@newsguy.com>
+#
+# This file is released under the terms of GPL v2 and any later version.
+# See the file COPYING in the root directory of the source tree for details.
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS := palmtreo680.o
+
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+clean:
+ rm -f $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/palmtreo680/README b/board/palmtreo680/README
new file mode 100644
index 0000000..159f1f6
--- /dev/null
+++ b/board/palmtreo680/README
@@ -0,0 +1,581 @@
+
+README for the Palm Treo 680.
+
+Copyright (C) 2013 Mike Dunn <mikedunn@newsguy.com>
+
+You may reproduce the contents of this file entirely or in part, but please
+credit me by name if you do. Thanks.
+
+
+Intro
+=====
+
+Yes, you can program u-boot onto the flash of your Palm Treo 680 so that u-boot
+(then Linux, Android, ...) runs at power-up. This document describes how, and
+gives some implementation details on this port of u-boot and describes how the
+Treo 680 boots from reset.
+
+But first, I probably don't need to tell you that after doing this, your phone
+will no longer run PalmOS. You *may* be able to later restore your phone to its
+original state by creating a backup image of the flash before writing u-boot
+(details below), but this is not heavily tested and should not be relied upon.
+There is also the possibility that something may go wrong during the process of
+programming u-boot, leaving you with a bricked phone. If you follow these
+instructions carefully this chance will be minimized, but I do not recommend
+that you program u-boot onto a phone that you can not afford to lose, and
+certainly not one that contains important data that is not backed up elsewhere.
+I AM NOT RESPONSIBLE FOR THE LOSS OF YOUR PHONE. DO THIS AT YOUR OWN RISK.
+Having said that, feel free to send me a note cursing me out if something does
+go wrong, but please tell me what happened exactly. For that matter, I'd love
+to hear from you if you succeed.
+
+
+
+Details on the SPL
+==================
+
+The docg4 features a 2k region at the start of its address space that interfaces
+to the system bus like a NOR flash. This allows the docg4 to function as a boot
+ROM. The Treo 680 uses this feature. The contents of this 2k region are
+write-protected and can not be reprogrammed. Fortunately, the code it contains
+does what we need to do, at least partially. After some essential hardware
+initialization (like the SDRAM controller), it runs an IPL (initial program
+loader) that copies 128K (no more, no less) from flash to a fixed address in
+SDRAM (0xa1700000) and jumps to it. 128K is too small for u-boot, so we use it
+to load a u-boot secondary program loader (SPL). But since our SPL only
+occupies a little over 1k, we can economize on flash usage by having the IPL
+load a portion of u-boot proper as well. We let the IPL load the first 128k of
+a concatenated spl + u-boot image, and because the SPL is placed before u-boot
+proper, the IPL jumps to the SPL, which copies the portion of u-boot that the
+IPL has already loaded to its correct SDRAM address, and then loads the
+remainder of u-boot and jumps to it.
+
+
+
+The docg4's "reliable mode"
+===========================
+
+This is a special mode of operation of the docg4's integrated controller whereby
+consecutive pairs of 2k regions are used in parallel (in some fashion) to store
+2k of data. In other words, the normal capacity is halved, but the data
+integrity is improved. In this mode, the data is read or written from pages in
+even-numbered 2k regions (regions starting at 0x000, 0x1000, 0x2000, ...). The
+odd-numbered 2k regions (regions starting at 0x800, 0x1800, 0x2800, ...) are
+transparently used in parallel. In reliable mode, the odd-numbered 2k regions
+are not meant to be read or written directly.
+
+Reliable mode is used by the IPL because there is not enough space in its 2k
+footprint to implement the BCH ecc algorithm. Data that is read while reliable
+mode is enabled must have been written in reliable mode, or the read fails.
+However, data written in reliable mode can also be read in normal mode (just not
+as reliably), but only from the even-numbered 2k regions; the odd-numbered 2k
+regions appear to contain junk, and will generate ecc errors. When the IPL and
+SPL read from flash, the odd-numbered 2k regions are explicitly skipped. The
+same is true for the flash_u-boot utility when it writes the u-boot image in
+reliable mode.
+
+The docg4 Linux driver supports writing in reliable mode (it is enabled by the
+module parameter), but not reading. However, the u-boot docg4_spl driver does
+read in reliable mode, in the same fashion as the IPL.
+
+
+
+Details on the IPL and its data format
+======================================
+
+Starting from block 5 and counting upward, the IPL will search for and load the
+first two blocks it finds that contain a magic number in the oob of the first
+page of the block. The contents are loaded to SDRAM starting at address
+0xa1700000. After two blocks have been loaded, it jumps to 0xa1700000. The
+number of blocks loaded and the load address in SDRAM are hard-coded; only the
+flash offset of the blocks can vary at run-time (based on the presence of the
+magic number).
+
+In addition to using the docg4's reliable mode, the IPL expects each 512 byte
+page to be written redundantly in the subsequent page. The hardware is capable
+of detecting bit errors (but not correcting them), and if a bit error is
+detected when a page is read, the page contents are discarded and the subsequent
+page is read.
+
+Reliable mode reduces the capacity of a block by half, and the redundant pages
+reduce it by half again. As a result, the normal 256k capacity of a block is
+reduced to 64k for the purposes of the IPL/SPL.
+
+For the sake of simplicity and uniformity, the u-boot SPL mimics the operation
+of the IPL, and expects the image to be stored in the same format.
+
+
+
+Instructions on Programming u-boot to flash
+===========================================
+
+To program u-boot to your flash, you will need to boot the Linux kernel on your
+phone using a PalmOS bootloader such as cocoboot. The details of building and
+running Linux on your Treo (cross-compiling, creating a root filesystem,
+configuring the kernel, etc) are beyond the scope of this document. The
+remainder of this document describes in detail how to program u-boot to the
+flash using Linux running on the Treo.
+
+
+
+Hardware Prerequisites
+======================
+
+A Palm Treo 680:
+ (dugh)
+
+A Palm usb cable:
+ You'll need this to establish a usbtty console connection to u-boot from a
+ desktop PC. Currently there is no support in u-boot for the pxa27x keypad
+ (coming soon), so a serial link must be used for the console.
+ These cables are still widely available if you don't already have one.
+
+A Linux desktop PC.
+ You may be able to use Windows for the u-boot console if you have a usb driver
+ that is compatible with the Linux usbserial driver, but for programming u-boot
+ to flash, you'll really want to use a Linux PC.
+
+
+
+Treo-side Software Prerequisites
+================================
+
+Linux bootloader for PalmOS:
+
+ Cocoboot is the only one I'm aware of. If you don't already have this, you
+ can download it from
+ https://download.enlightenment.org/misc/Illume/Treo-650/2008-11-13/sdcard-base.tar.gz
+ which is a compressed tar archive of the contents of an sd card containing
+ cocoboot. Use mkdosfs to create a fat16 filesystem on the first primary
+ partition of the card, mount the partition, and extract the tar file to it.
+ You will probably need to edit the cocoboot.conf file to customize the
+ parameters passed to the kernel.
+
+
+
+Linux kernel:
+
+ The kernel on the Treo 680 is still a little rough around the edges, and the
+ official kernel frequently breaks on the Treo :( A development kernel
+ specifically for the Treo 680 can be found on github:
+ http://github.com/mike-dunn/linux-treo680
+ The master branch of this tree has been tested on the Treo, and I recommend
+ using this kernel for programming u-boot. As of this writing, there may be a
+ bug in the docg4 nand flash driver that sometimes causes block erasures to
+ fail. This has been fixed in the above tree.
+
+ If you choose to use the official kernel, it must contain the docg4 driver that
+ includes the reliable_mode module parameter. This was a later enhancement to
+ the driver, and was merged to the kernel as of v3.8. Do not try to use an
+ earlier kernel that contains the docg4 driver without support for writing in
+ reliable mode. If you try to program u-boot to flash with the docg4 driver
+ loaded without the reliable_mode parameter enabled, you *will* brick your
+ phone!
+
+ For the purpose of programming u-boot to flash, the following options must be
+ enabled in the Treo kernel's .config:
+
+ CONFIG_MTD=y
+ CONFIG_MTD_CMDLINE_PARTS=y
+ CONFIG_MTD_CHAR=y
+ CONFIG_MTD_NAND_DOCG4=m
+
+ Note that the docg4 nand driver is configured as a module, because we will
+ want to load and unload it with reliable_mode enabled or disabled as needed.
+
+ You will also need to specify mtd partitions on the kernel command line. In
+ the instructions that follow, we will assume that the flash blocks to which
+ u-boot will be programmed are defined by the second partition on the device.
+ The u-boot config file (include/configs/palmtreo680.h) places the u-boot image
+ at the start of block 6 (offset 0x180000), which is the first writable
+ (non-protected) block on the flash (this is also where the PalmOS SPL starts).
+ The u-boot image occupies four blocks, so to create the u-boot partition, pass
+ this command line to the kernel:
+ mtdparts=Msys_Diskonchip_G4:1536k(protected_part)ro,1024k(bootloader_part),-(filesys_part)
+ This will create three partitions:
+ protected_part: the first six blocks, which are read-only
+ bootloader_part: the next four blocks, for the u-boot image
+ filesys_part: the remainder of the device
+ The mtdchar kernel device driver will use device nodes /dev/mtd0, /dev/mtd1,
+ and /dev/mtd2 for these partitions, respectively. Ensure that your root file
+ system at least has /dev/mtd1 if you are not running udev or mdev.
+
+
+Userspace Utilities:
+
+ In addition to everything necessary to provide a useful userspace environment
+ (busybox is indispensable, of course), you will need the mtd-utils package on
+ your root filesystem. I use version 1.5.0 of mtd-utils, and I suggest you use
+ this version as well, or at leat a version very close to this one, as
+ mtd-utils has tended to be fluid.
+
+ Note that busybox includes a version of mtd-utils. These are deficient and
+ should not be used. When you run one of these utilities (nanddump, etc),
+ ensure you are invoking the separate executable from mtd-utils, and not the
+ one built into busybox. I recommend that you configure busybox with its
+ mtd-utils disabled to avoid any possibility of confusion.
+
+ You will also need to cross-compile the userspace Linux utility in
+ tools/palmtreo680/flash_u-boot.c, which we will run on the Treo to perform the
+ actual write of the u-boot image to flash. This utility links against libmtd
+ from the mtd-utils package.
+
+
+
+Desktop PC-side Software Prerequisites
+======================================
+
+Terminal emulator application:
+ minicom, kermit, etc.
+
+
+Linux kernel:
+ Compiled with CONFIG_USB_SERIAL enabled. Build this as a module.
+
+
+
+Recommended (Not directly related to u-boot)
+============================================
+
+Working directly on the Treo's tiny screen and keypad is difficult and
+error-prone. I recommend that you log into the Linux kernel running on your
+Treo from your desktop PC using ethernet over usb. The desktop's kernel must be
+configured with CONFIG_USB_USBNET, CONFIG_USB_NET_CDCETHER, and
+CONFIG_USB_NET_CDC_SUBSET. The Treo's kernel will need CONFIG_USB_ETH, and its
+init script will need to start an ssh daemon like dropbear. Note that the usb0
+network interface will not appear on the desktop PC until the Treo kernel's usb
+ethernet gadget driver has initialized. You must wait for this to occur (watch
+the PC's kernel log) before you can assign usb0 an ip address and log in to the
+Treo. If you also build the Treo's kernel with CONFIG_IP_PNP enabled, you can
+pass its ip address on the kernel command line, and obviate the need to
+initialize the network interface in your init script.
+
+Having the Palm usb cable connected to the host has the added benefit of keeping
+power supplied to your Treo, reducing the drain on the battery. If something
+goes wrong while you're programming u-boot to the flash, you will have lots of
+time to correct it before the battery dies.
+
+I have encountered a situation where the kernel is sometimes unable to mount a
+root filesystem on the mmc card due to the mmc controller not initializing in
+time, (and CONFIG_MMC_UNSAFE_RESUME doesn't seem to help) so I recommend that
+you build a minimal root filesystem into the kernel using the kernel's initramfs
+feature (CONFIG_BLK_DEV_INITRD). If you want your root filesystem on the mmc
+card, your init script can mount and switch_root to the mmc card after a short
+sleep. But keep in mind that in this case you won't be able to use an mmc card
+to transfer files between your desktop and the Treo once Linux is running.
+Another option for transfering files is to mount an nfs filesystem exported by
+the desktop PC. For greatest convenience, you can export the root filesystem
+itself from your desktop PC and switch_root to it in your init script. This
+will work if your initramfs init script contains a loop that waits for you to
+initialize the usb0 network interface on the desktop PC; e.g., loop while a ping
+to the desktop PC returns an error. After the loop exits, do the nfs mount and
+call switch_root. (You can not use the kernel nfsroot feature because the
+network will not be up when the kernel expects it to be; i.e., not until you
+configure the usb0 interface on the desktop.) Use the nfs 'nolock' option when
+mounting to avoid the need to run a portmapper like rpcbind.
+
+
+
+Preliminaries
+=============
+
+Once Linux is running on your Treo, you may want to perform a few sanity checks
+before programming u-boot. These checks will verify my assumptions regarding
+all the Treo 680s out there, and also ensure that the flash and mtd-utils are
+working correctly. If you are impatient and reckless, you may skip this
+section, but see disclaimer at the top of this file!
+
+Load the docg4 driver:
+
+ $ modprobe docg4 ignore_badblocks=1 reliable_mode=1
+
+We tell the driver to use the docg4's "reliable mode" when writing because this
+is the format required by the IPL, which runs from power-up and loads the first
+portion of u-boot. We must ignore bad blocks because linux mtd uses out-of-band
+(oob) bytes to mark bad blocks, which will cause the blocks written by PalmOS to
+be misidentified as "bad" by libmtd.
+
+Check the kernel log to ensure that all's well:
+
+ $ dmesg | tail
+ <... snip ...>
+ docg4 docg4: NAND device: 128MiB Diskonchip G4 detected
+ 3 cmdlinepart partitions found on MTD device Msys_Diskonchip_G4
+ Creating 3 MTD partitions on "Msys_Diskonchip_G4":
+ 0x000000000000-0x000000180000 : "protected_part"
+ 0x000000180000-0x000000280000 : "bootloader_part"
+ 0x000000280000-0x000008000000 : "filesys_part"
+
+Ensure that the partition boundaries are as shown. (If no partitions are shown,
+did you remember to pass them to the kernel on the command line?) We will write
+u-boot to bootloader_part, which starts at offset 0x180000 (block 6) and spans 4
+256k blocks. This partition is accessed through the device node /dev/mtd1.
+
+The docg4 contains a read-only table that identifies blocks that were marked as
+bad at the factory. This table is in the page at offset 0x2000, which is within
+the partition protected_part (/dev/mtd0). There is a slight chance that one or
+more of the four blocks that we will use for u-boot is listed in the table, so
+use nanddump to inspect the table to see if this is the case:
+
+ $ nanddump -p -l 512 -s 0x2000 -o /dev/mtd0
+ ECC failed: 0
+ ECC corrected: 0
+ Number of bad blocks: 0
+ Number of bbt blocks: 0
+ Block size 262144, page size 512, OOB size 16
+ Dumping data starting at 0x00002000 and ending at 0x00002200...
+ 0x00002000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
+ <... snip ...>
+
+The format of the table is simple: one bit per block, with block numbers
+increasing from left to right, starting with block 0 as the most significant bit
+of the first byte. A bit will be clear if the corresponding block is bad. We
+want to use blocks 6 throgh 9, so both of the two least significant bits of the
+first byte must be set, as must the two most significant bits of the second
+byte. If this is not true in your case (you are very unlucky), you should use
+the first contiguous set of four good blocks after block 6, and adjust the
+partition boundaries accordingly. You will also have to change the value of
+CONFIG_SYS_NAND_U_BOOT_OFFS in include/configs/palmtreo680.h and recompile
+u-boot. Because the two blocks loaded by the IPL do not have to be contiguous,
+but our SPL expects them to be, you will need to erase any good blocks that are
+at an offset prior to CONFIG_SYS_NAND_U_BOOT_OFFS, so that the IPL does not find
+the magic number in oob and load it. Once you have done all this, the
+instructions in this file still apply, except that the instructions below for
+restoring the original PalmOS block contents may need to be modified.
+
+Next, use nanddump to verify that the PalmOS SPL is where we expect it to be.
+The SPL can be identified by a magic number in the oob bytes of the first page
+of each of the two blocks containing the SPL image. Pages are 512 bytes in
+size, so to dump the first page, plus the oob:
+
+ $ nanddump -p -l 512 -s 0 -o /dev/mtd1
+ ECC failed: 0
+ ECC corrected: 0
+ Number of bad blocks: 0
+ Number of bbt blocks: 0
+ Block size 262144, page size 512, OOB size 16
+ Dumping data starting at 0x00000000 and ending at 0x00000200...
+ 0x00000000: 0a 00 00 ea 00 00 00 00 00 00 00 00 00 00 00 00
+ <... snip ...>
+ 0x000001f0: 13 4c 21 60 13 4d 2a 69 13 4b 29 69 89 1a 99 42
+ OOB Data: 42 49 50 4f 30 30 30 10 3a e2 00 92 be a0 11 ff
+
+Verify that the first seven bytes of oob data match those in the above line.
+(This is ASCII "BIPO000".)
+
+Do the same for the next block:
+ $ nanddump -p -l 512 -s 0x40000 -o /dev/mtd1
+
+The first seven oob bytes in last line should read:
+
+ OOB Data: 42 49 50 4f 30 30 31 81 db 8e 8f 46 07 9b 59 ff
+
+(This is ASCII "BIPO001".)
+
+For additional assurance, verify that the next block does *not* contain SPL
+data.
+
+ $ nanddump -p -l 512 -s 0x80000 -o /dev/mtd1
+
+It doesn't matter what the oob contains, as long as the first four bytes are
+*not* ASCII "BIPO". PalmOS should only be using two blocks for the SPL
+(although we will need four for u-boot).
+
+If you want, you can back up the contents of bootloader_part to a file. You may
+be able to restore it later, if desired (see "Restoring PalmOS" below).
+
+ $ nanddump -l 0x100000 -s 0 -o -f bootloader_part.orig /dev/mtd1
+
+nanddump will spew voluminous warnings about uncorrectable ecc errors. This is
+a consequence of reading pages that were written in reliable mode, and is
+expected (these should all occur on pages in odd-numbered 2k regions; i.e.,
+0x800, 0xa00, 0xc00, 0xe00, 0x1800, 0x1a00, ...). The size of the file
+bootloader_part.orig should be 1081344, which is 2048 pages, each of size 512
+plus 16 oob bytes. If you are using initramfs for the root filesystem, don't
+forget to copy the file to permanent storage, such as an mmc card.
+
+If all of the above went well, you can now program u-boot.
+
+
+
+Programming u-boot
+==================
+
+Our u-boot includes a small SPL that must be prepended to u-boot proper. From
+the base u-boot source directory on your desktop PC:
+
+ $ cat spl/u-boot-spl.bin u-boot.bin > u-boot-concat.bin
+
+cd to the tools/palmtreo680/ directory, and cross-compile flash_u-boot.c for the
+Treo:
+
+ $(CC) -o flash_u-boot $(CFLAGS) $(INCLUDEPATH) $(LIBPATH) flash_u-boot.c -lmtd
+
+Substitute variable values from your cross-compilation environment as
+appropriate. Note that it links to libmtd from mtd-utils, and this must be
+included in $(LIBPATH) and $(INCLUDEPATH).
+
+Transfer u-boot-concat.bin and the compiled flash_u-boot utility to the Treo's
+root filesystem. On the Treo, cd to the directory where these files were
+placed.
+
+Load the docg4 driver if you have not already done so.
+
+ $ modprobe docg4 ignore_badblocks=1 reliable_mode=1
+
+Erase the blocks to which we will write u-boot:
+
+ $ flash_erase /dev/mtd1 0x00 4
+
+If no errors are reported, write u-boot to the flash:
+
+ $ ./flash_u-boot u-boot-concat.bin /dev/mtd1
+
+You can use nanddump (see above) to verify that the data was written. This
+time, "BIPO" should be seen in the first four oob bytes of the first page of all
+four blocks in /dev/mtd1; i.e., at offsets 0x00000, 0x40000, 0x80000, 0xc0000.
+
+Shutdown linux, remove and re-insert the battery, hold your breath...
+
+
+
+Enjoying u-boot
+===============
+
+After you insert the battery, the u-boot splash screen should appear on the lcd
+after a few seconds. With the usb cable connecting the Treo to your PC, in the
+kernel log of your PC you should see
+
+ <6>usb 3-1: New USB device found, idVendor=0525, idProduct=a4a6
+ <6>usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
+ <6>usb 3-1: Product: U-Boot 2013.01-00167-gd62ef56-dirty
+ <6>usb 3-1: Manufacturer: Das U-Boot
+
+Load the usbserial module on your desktop PC:
+
+ $ modprobe usbserial vendor=0x0525 product=0xa4a6
+
+and run your favorite terminal emulation utility (minicom, kermit, etc) with the
+serial device set to /dev/ttyUSB0 (assuming this is your only usb serial
+device). You should be at the u-boot console (type 'help').
+
+There is not much that is unique about using u-boot on the palm treo 680.
+Kernels can be loaded from mmc, flash, and from the desktop PC via kermit. You
+can expand the size of the second partition on the flash to contain a kernel, or
+else put the kernel(s) in their own partition.
+
+Nand commands work as expected, with the excepton that blocks not written by the
+linux mtd subsystem may be misidentified by the u-boot docg4 driver as "bad" if
+they contain data in the oob bytes. This will be the case for the blocks
+containing the u-boot image, for example. To work around this, use 'nand scrub'
+instead of 'nand erase' to erase these blocks, and 'nand read.raw' to read them
+to memory. (It would be useful if u-boot's nand commands provided a way to
+explicitly ignore "bad" blocks, because read.raw does not perform ecc.) The
+'nand dump' command will read these "bad" blocks, however.
+
+Currently u-boot itself can only be programmed to flash from Linux; there is no
+support for reliable mode in u-boot's docg4 flash driver. This should be
+corrected soon.
+
+
+
+Customizing
+===========
+
+If you change u-boot's configuration significantly (adding or removing
+features), you may have to adjust the value of CONFIG_SYS_NAND_U_BOOT_SIZE.
+This is the size of the concatenated spl + u-boot image, and tells the SPL how
+many flash blocks it needs to load. It will be rounded up to the next 64k
+boundary (the spl flash block capacity), so it does not have to be exact, but
+you must ensure that it is not less than the actual image size. If it is larger
+than the image, blocks may be needlessly loaded, but if too small, u-boot may
+only be partially loaded, resulting in a boot failure (bricked phone), so better
+to be too large. The flash_u-boot utility will work with any size image and
+write the required number of blocks, provided that the partition is large
+enough.
+
+As the first writable block on the device, block 6 seems to make the most sense
+as the flash offset for writing u-boot (and this is where PalmOS places its
+SPL). But you can place it elsewhere if you like. If you do, you need to
+adjust CONFIG_SYS_NAND_U_BOOT_OFFS accordingly, and you must ensure that blocks
+preceeding the ones containing u-boot do *not* have the magic number in oob (the
+IPL looks for this). In other words, make sure that any blocks that previously
+contained the u-boot image or PalmOS SPL are erased (and optionally written with
+something else) so that the IPL does not load it. Also make sure that the new
+u-boot starting offset is at the start of a flash partition (check the kernel
+log after loading the docg4 driver), and pass the corresponding mtd device file
+to the flash_u-boot utility.
+
+The u-boot built-in default environment is used because a writable environment
+in flash did not seem worth the cost of a 256k flash block. But adding this
+should be straightforward.
+
+
+
+Restoring PalmOS
+================
+
+If you backed up the contents of bootloader_part flash partition earlier, you
+should be able to restore it with the shell script shown below. The first two
+blocks of data contain the PalmOS SPL and were written in reliable mode, whereas
+the next two blocks were written in normal mode, so the script has to load and
+unload the docg4 driver. Make sure that the mtd-utils nandwrite and flash_erase
+are in your path (and are not those from busybox). Also double-check that the
+backup image file bootloader_part.orig is exactly 1081344 bytes in length. If
+not, it was not backed up correctly. Run the script as:
+
+ ./restore_bootpart bootloader_part.orig /dev/mtd1
+
+The script will take a minute or so to run. When it finishes, you may want to
+verify with nanddump that the data looks correct before you cycle power, because
+if the backup or restore failed, your phone will be bricked. Note that as a
+consequence of reliable mode, the odd-numbered 2k regions in the first two
+blocks will not exactly match the contents of the backup file, (so unfortunately
+we can't simply dump the flash contents to a file and do a binary diff with the
+original back-up image to verify that it was restored correctly). Also,
+nanddump will report uncorrectable ecc errors when it reads those regions.
+
+#!/bin/sh
+
+if [ $# -ne 2 ]; then
+ echo "usage: $0: <image file> <mtd device node>"
+ exit 1
+fi
+
+# reliable mode used for the first two blocks
+modprobe -r docg4
+modprobe docg4 ignore_badblocks=1 reliable_mode=1 || exit 1
+
+# erase all four blocks
+flash_erase $2 0 4
+
+# Program the first two blocks in reliable mode.
+# 2k (4 pages) is written at a time, skipping alternate 2k regions
+# Note that "2k" is 2112 bytes, including 64 oob bytes
+file_ofs=0
+flash_ofs=0
+page=0
+while [ $page -ne 1024 ]; do
+ dd if=$1 bs=2112 skip=$file_ofs count=1 | nandwrite -o -n -s $flash_ofs $2 - || exit 1
+ file_ofs=$((file_ofs+2))
+ flash_ofs=$((flash_ofs+0x1000))
+ page=$((page+8))
+done;
+
+# normal mode used for the next two blocks
+modprobe -r docg4
+modprobe docg4 ignore_badblocks=1 || exit 1
+dd if=$1 bs=1 skip=$file_ofs count=540672 | nandwrite -o -n -s 0x80000 $2 - || exit 1
+modprobe -r docg4
+
+
+TODO
+====
+
+ - Keypad support.
+ - Interactive boot menu using keypad and lcd.
+ - Add reliable mode support to the u-boot docg4 driver.
+ - U-boot command that will write a new image to the bootloader partition in
+ flash.
+ - Linux FTD support.
+
diff --git a/board/palmtreo680/palmtreo680.c b/board/palmtreo680/palmtreo680.c
new file mode 100644
index 0000000..f4f6e1f
--- /dev/null
+++ b/board/palmtreo680/palmtreo680.c
@@ -0,0 +1,148 @@
+/*
+ * Palm Treo 680 Support
+ *
+ * Copyright (C) 2013 Mike Dunn <mikedunn@newsguy.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ *
+ */
+
+#include <common.h>
+#include <command.h>
+#include <serial.h>
+#include <nand.h>
+#include <malloc.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch-pxa/pxa.h>
+#include <asm/arch-pxa/regs-mmc.h>
+#include <asm/io.h>
+#include <asm/global_data.h>
+#include <u-boot/crc.h>
+#include <linux/mtd/docg4.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct nand_chip docg4_nand_chip;
+
+int board_init(void)
+{
+ /* We have RAM, disable cache */
+ dcache_disable();
+ icache_disable();
+
+ gd->bd->bi_arch_number = CONFIG_MACH_TYPE;
+ gd->bd->bi_boot_params = CONFIG_SYS_DRAM_BASE + 0x100;
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ /* IPL initializes SDRAM (we're already running from it) */
+ gd->ram_size = PHYS_SDRAM_1_SIZE;
+ return 0;
+}
+
+#ifdef CONFIG_LCD
+void lcd_enable(void)
+{
+ /*
+ * Undo the L_BIAS / gpio77 pin configuration performed by the pxa lcd
+ * driver code. We need it as an output gpio.
+ */
+ writel((readl(GAFR2_L) & ~(0xc << 24)), GAFR2_L);
+
+ /* power-up and enable the lcd */
+ writel(0x00400000, GPSR(86)); /* enable; drive high */
+ writel(0x00002000, GPSR(77)); /* power; drive high */
+ writel(0x02000000, GPCR(25)); /* enable_n; drive low */
+
+ /* turn on LCD backlight and configure PWM for reasonable brightness */
+ writel(0x00, PWM_CTRL0);
+ writel(0x1b1, PWM_PERVAL0);
+ writel(0xfd, PWM_PWDUTY0);
+ writel(0x00000040, GPSR(38)); /* backlight power on */
+}
+#endif
+
+#ifdef CONFIG_MMC
+int board_mmc_init(bd_t *bis)
+{
+ writel(1 << 10, GPSR(42)); /* power on */
+ return pxa_mmc_register(0);
+}
+#endif
+
+void board_nand_init(void)
+{
+ /* we have one 128M diskonchip G4 */
+
+ struct mtd_info *mtd = &nand_info[0];
+ struct nand_chip *nand = &docg4_nand_chip;
+ if (docg4_nand_init(mtd, nand, 0))
+ hang();
+}
+
+#ifdef CONFIG_SPL_BUILD
+void nand_boot(void)
+{
+ __attribute__((noreturn)) void (*uboot)(void);
+
+ extern const void *_start, *_end; /* boundaries of spl in memory */
+
+ /* size of spl; ipl loads this, and then a portion of u-boot */
+ const size_t spl_image_size = ((size_t)&_end - (size_t)&_start);
+
+ /* the flash offset of the blocks that are loaded by the spl */
+ const uint32_t spl_load_offset = CONFIG_SYS_NAND_U_BOOT_OFFS +
+ DOCG4_IPL_LOAD_BLOCK_COUNT * DOCG4_BLOCK_SIZE;
+
+ /* total number of bytes loaded by IPL */
+ const size_t ipl_load_size =
+ DOCG4_IPL_LOAD_BLOCK_COUNT * DOCG4_BLOCK_CAPACITY_SPL;
+
+ /* number of bytes of u-boot proper that was loaded by the IPL */
+ const size_t ipl_uboot_load_size = ipl_load_size - spl_image_size;
+
+ /* number of remaining bytes of u-boot that the SPL must load */
+ const size_t spl_load_size =
+ CONFIG_SYS_NAND_U_BOOT_SIZE - ipl_load_size;
+
+ /* memory address where we resume loading u-boot */
+ void *const load_addr =
+ (void *)(CONFIG_SYS_NAND_U_BOOT_DST + ipl_uboot_load_size);
+
+ /*
+ * Copy the portion of u-boot already read from flash by the IPL to its
+ * correct load address.
+ */
+ memcpy((void *)CONFIG_SYS_NAND_U_BOOT_DST, &_end, ipl_uboot_load_size);
+
+ /*
+ * Resume loading u-boot where the IPL left off.
+ */
+ nand_spl_load_image(spl_load_offset, spl_load_size, load_addr);
+
+#ifdef CONFIG_NAND_ENV_DST
+ nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
+ (void *)CONFIG_NAND_ENV_DST);
+
+#ifdef CONFIG_ENV_OFFSET_REDUND
+ nand_spl_load_image(CONFIG_ENV_OFFSET_REDUND, CONFIG_ENV_SIZE,
+ (void *)CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE);
+#endif
+#endif
+ /*
+ * Jump to U-Boot image
+ */
+ uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START;
+ (*uboot)();
+}
+
+void board_init_f(ulong bootflag)
+{
+ nand_boot();
+}
+
+#endif /* CONFIG_SPL_BUILD */
diff --git a/board/phytec/pcm051/board.c b/board/phytec/pcm051/board.c
index 43d7b6e..0cca8d7 100644
--- a/board/phytec/pcm051/board.c
+++ b/board/phytec/pcm051/board.c
@@ -39,9 +39,6 @@
DECLARE_GLOBAL_DATA_PTR;
static struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE;
-#ifdef CONFIG_SPL_BUILD
-static struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE;
-#endif
/* MII mode defines */
#define MII_MODE_ENABLE 0x0
@@ -50,31 +47,11 @@
static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
-/* UART defines */
#ifdef CONFIG_SPL_BUILD
-#define UART_RESET (0x1 << 1)
-#define UART_CLK_RUNNING_MASK 0x1
-#define UART_SMART_IDLE_EN (0x1 << 0x3)
/* DDR RAM defines */
#define DDR_CLK_MHZ 303 /* DDR_DPLL_MULT value */
-static void rtc32k_enable(void)
-{
- struct rtc_regs *rtc = (struct rtc_regs *)RTC_BASE;
-
- /*
- * Unlock the RTC's registers. For more details please see the
- * RTC_SS section of the TRM. In order to unlock we need to
- * write these specific values (keys) in this order.
- */
- writel(0x83e70b13, &rtc->kick0r);
- writel(0x95a4f1e0, &rtc->kick1r);
-
- /* Enable the RTC 32K OSC by setting bits 3 and 6. */
- writel((1 << 3) | (1 << 6), &rtc->osc);
-}
-
static const struct ddr_data ddr3_data = {
.datardsratio0 = MT41J256M8HX15E_RD_DQS,
.datawdsratio0 = MT41J256M8HX15E_WR_DQS,
@@ -115,6 +92,15 @@
void s_init(void)
{
/*
+ * Save the boot parameters passed from romcode.
+ * We cannot delay the saving further than this,
+ * to prevent overwrites.
+ */
+#ifdef CONFIG_SPL_BUILD
+ save_omap_boot_params();
+#endif
+
+ /*
* WDT1 is already running when the bootloader gets control
* Disable it to avoid "random" resets
*/
@@ -132,22 +118,8 @@
/* Enable RTC32K clock */
rtc32k_enable();
- /* UART softreset */
- u32 regval;
-
enable_uart0_pin_mux();
-
- regval = readl(&uart_base->uartsyscfg);
- regval |= UART_RESET;
- writel(regval, &uart_base->uartsyscfg);
- while ((readl(&uart_base->uartsyssts) & UART_CLK_RUNNING_MASK)
- != UART_CLK_RUNNING_MASK)
- ;
-
- /* Disable smart idle */
- regval = readl(&uart_base->uartsyscfg);
- regval |= UART_SMART_IDLE_EN;
- writel(regval, &uart_base->uartsyscfg);
+ uart_soft_reset();
gd = &gdata;
diff --git a/board/raidsonic/ib62x0/kwbimage.cfg b/board/raidsonic/ib62x0/kwbimage.cfg
index bade627..27a5e31 100644
--- a/board/raidsonic/ib62x0/kwbimage.cfg
+++ b/board/raidsonic/ib62x0/kwbimage.cfg
@@ -20,7 +20,7 @@
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
#
-# Refer docs/README.kwimage for more details about how-to configure
+# Refer doc/README.kwbimage for more details about how-to configure
# and create kirkwood boot image
#
diff --git a/board/samsung/smdk5250/smdk5250-uboot-spl.lds b/board/samsung/common/exynos-uboot-spl.lds
similarity index 100%
rename from board/samsung/smdk5250/smdk5250-uboot-spl.lds
rename to board/samsung/common/exynos-uboot-spl.lds
diff --git a/board/samsung/dts/exynos5250-smdk5250.dts b/board/samsung/dts/exynos5250-smdk5250.dts
index 8da973b..80ffe30 100644
--- a/board/samsung/dts/exynos5250-smdk5250.dts
+++ b/board/samsung/dts/exynos5250-smdk5250.dts
@@ -30,6 +30,12 @@
spi2 = "/spi@12d40000";
spi3 = "/spi@131a0000";
spi4 = "/spi@131b0000";
+ mmc0 = "/mmc@12200000";
+ mmc1 = "/mmc@12210000";
+ mmc2 = "/mmc@12220000";
+ mmc3 = "/mmc@12230000";
+ serial0 = "/serial@12C30000";
+ console = "/serial@12C30000";
};
sromc@12250000 {
@@ -119,4 +125,24 @@
samsung,ycbcr-coeff = <0>;
samsung,color-depth = <1>;
};
+
+ mmc@12200000 {
+ samsung,bus-width = <8>;
+ samsung,timing = <1 3 3>;
+ samsung,removable = <0>;
+ };
+
+ mmc@12210000 {
+ status = "disabled";
+ };
+
+ mmc@12220000 {
+ samsung,bus-width = <4>;
+ samsung,timing = <1 2 3>;
+ samsung,removable = <1>;
+ };
+
+ mmc@12230000 {
+ status = "disabled";
+ };
};
diff --git a/board/samsung/dts/exynos5250-snow.dts b/board/samsung/dts/exynos5250-snow.dts
index 24658c1..fdc047a 100644
--- a/board/samsung/dts/exynos5250-snow.dts
+++ b/board/samsung/dts/exynos5250-snow.dts
@@ -30,6 +30,12 @@
spi2 = "/spi@12d40000";
spi3 = "/spi@131a0000";
spi4 = "/spi@131b0000";
+ mmc0 = "/mmc@12200000";
+ mmc1 = "/mmc@12210000";
+ mmc2 = "/mmc@12220000";
+ mmc3 = "/mmc@12230000";
+ serial0 = "/serial@12C30000";
+ console = "/serial@12C30000";
};
sound@12d60000 {
@@ -56,6 +62,26 @@
};
};
+ mmc@12200000 {
+ samsung,bus-width = <8>;
+ samsung,timing = <1 3 3>;
+ samsung,removable = <0>;
+ };
+
+ mmc@12210000 {
+ status = "disabled";
+ };
+
+ mmc@12220000 {
+ samsung,bus-width = <4>;
+ samsung,timing = <1 2 3>;
+ samsung,removable = <1>;
+ };
+
+ mmc@12230000 {
+ status = "disabled";
+ };
+
tmu@10060000 {
samsung,min-temp = <25>;
samsung,max-temp = <125>;
diff --git a/board/samsung/origen/Makefile b/board/samsung/origen/Makefile
index 3a885a5..63c8b46 100644
--- a/board/samsung/origen/Makefile
+++ b/board/samsung/origen/Makefile
@@ -24,19 +24,12 @@
LIB = $(obj)lib$(BOARD).o
-SOBJS := mem_setup.o
-SOBJS += lowlevel_init.o
-
ifndef CONFIG_SPL_BUILD
COBJS += origen.o
endif
-ifdef CONFIG_SPL_BUILD
-COBJS += mmc_boot.o
-endif
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
ALL +=$(obj).depend $(LIB)
diff --git a/board/samsung/origen/lowlevel_init.S b/board/samsung/origen/lowlevel_init.S
deleted file mode 100644
index 9daa0da..0000000
--- a/board/samsung/origen/lowlevel_init.S
+++ /dev/null
@@ -1,397 +0,0 @@
-/*
- * Lowlevel setup for ORIGEN board based on EXYNOS4210
- *
- * Copyright (C) 2011 Samsung Electronics
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-#include <asm/arch/cpu.h>
-#include "origen_setup.h"
-/*
- * Register usages:
- *
- * r5 has zero always
- * r7 has GPIO part1 base 0x11400000
- * r6 has GPIO part2 base 0x11000000
- */
-
-_TEXT_BASE:
- .word CONFIG_SYS_TEXT_BASE
-
- .globl lowlevel_init
-lowlevel_init:
- push {lr}
-
- /* r5 has always zero */
- mov r5, #0
- ldr r7, =EXYNOS4_GPIO_PART1_BASE
- ldr r6, =EXYNOS4_GPIO_PART2_BASE
-
- /* check reset status */
- ldr r0, =(EXYNOS4_POWER_BASE + INFORM1_OFFSET)
- ldr r1, [r0]
-
- /* AFTR wakeup reset */
- ldr r2, =S5P_CHECK_DIDLE
- cmp r1, r2
- beq exit_wakeup
-
- /* LPA wakeup reset */
- ldr r2, =S5P_CHECK_LPA
- cmp r1, r2
- beq exit_wakeup
-
- /* Sleep wakeup reset */
- ldr r2, =S5P_CHECK_SLEEP
- cmp r1, r2
- beq wakeup_reset
-
- /*
- * If U-boot is already running in ram, no need to relocate U-Boot.
- * Memory controller must be configured before relocating U-Boot
- * in ram.
- */
- ldr r0, =0x0ffffff /* r0 <- Mask Bits*/
- bic r1, pc, r0 /* pc <- current addr of code */
- /* r1 <- unmasked bits of pc */
- ldr r2, _TEXT_BASE /* r2 <- original base addr in ram */
- bic r2, r2, r0 /* r2 <- unmasked bits of r2*/
- cmp r1, r2 /* compare r1, r2 */
- beq 1f /* r0 == r1 then skip sdram init */
-
- /* init system clock */
- bl system_clock_init
-
- /* Memory initialize */
- bl mem_ctrl_asm_init
-
-1:
- /* for UART */
- bl uart_asm_init
- bl tzpc_init
- pop {pc}
-
-wakeup_reset:
- bl system_clock_init
- bl mem_ctrl_asm_init
- bl tzpc_init
-
-exit_wakeup:
- /* Load return address and jump to kernel */
- ldr r0, =(EXYNOS4_POWER_BASE + INFORM0_OFFSET)
-
- /* r1 = physical address of exynos4210_cpu_resume function */
- ldr r1, [r0]
-
- /* Jump to kernel*/
- mov pc, r1
- nop
- nop
-
-/*
- * system_clock_init: Initialize core clock and bus clock.
- * void system_clock_init(void)
- */
-system_clock_init:
- push {lr}
- ldr r0, =EXYNOS4_CLOCK_BASE
-
- /* APLL(1), MPLL(1), CORE(0), HPM(0) */
- ldr r1, =CLK_SRC_CPU_VAL
- ldr r2, =CLK_SRC_CPU_OFFSET
- str r1, [r0, r2]
-
- /* wait ?us */
- mov r1, #0x10000
-2: subs r1, r1, #1
- bne 2b
-
- ldr r1, =CLK_SRC_TOP0_VAL
- ldr r2, =CLK_SRC_TOP0_OFFSET
- str r1, [r0, r2]
-
- ldr r1, =CLK_SRC_TOP1_VAL
- ldr r2, =CLK_SRC_TOP1_OFFSET
- str r1, [r0, r2]
-
- /* DMC */
- ldr r1, =CLK_SRC_DMC_VAL
- ldr r2, =CLK_SRC_DMC_OFFSET
- str r1, [r0, r2]
-
- /*CLK_SRC_LEFTBUS */
- ldr r1, =CLK_SRC_LEFTBUS_VAL
- ldr r2, =CLK_SRC_LEFTBUS_OFFSET
- str r1, [r0, r2]
-
- /*CLK_SRC_RIGHTBUS */
- ldr r1, =CLK_SRC_RIGHTBUS_VAL
- ldr r2, =CLK_SRC_RIGHTBUS_OFFSET
- str r1, [r0, r2]
-
- /* SATA: SCLKMPLL(0), MMC[0:4]: SCLKMPLL(6) */
- ldr r1, =CLK_SRC_FSYS_VAL
- ldr r2, =CLK_SRC_FSYS_OFFSET
- str r1, [r0, r2]
-
- /* UART[0:4] */
- ldr r1, =CLK_SRC_PERIL0_VAL
- ldr r2, =CLK_SRC_PERIL0_OFFSET
- str r1, [r0, r2]
-
- /* CAM , FIMC 0-3 */
- ldr r1, =CLK_SRC_CAM_VAL
- ldr r2, =CLK_SRC_CAM_OFFSET
- str r1, [r0, r2]
-
- /* MFC */
- ldr r1, =CLK_SRC_MFC_VAL
- ldr r2, =CLK_SRC_MFC_OFFSET
- str r1, [r0, r2]
-
- /* G3D */
- ldr r1, =CLK_SRC_G3D_VAL
- ldr r2, =CLK_SRC_G3D_OFFSET
- str r1, [r0, r2]
-
- /* LCD0 */
- ldr r1, =CLK_SRC_LCD0_VAL
- ldr r2, =CLK_SRC_LCD0_OFFSET
- str r1, [r0, r2]
-
- /* wait ?us */
- mov r1, #0x10000
-3: subs r1, r1, #1
- bne 3b
-
- /* CLK_DIV_CPU0 */
- ldr r1, =CLK_DIV_CPU0_VAL
- ldr r2, =CLK_DIV_CPU0_OFFSET
- str r1, [r0, r2]
-
- /* CLK_DIV_CPU1 */
- ldr r1, =CLK_DIV_CPU1_VAL
- ldr r2, =CLK_DIV_CPU1_OFFSET
- str r1, [r0, r2]
-
- /* CLK_DIV_DMC0 */
- ldr r1, =CLK_DIV_DMC0_VAL
- ldr r2, =CLK_DIV_DMC0_OFFSET
- str r1, [r0, r2]
-
- /*CLK_DIV_DMC1 */
- ldr r1, =CLK_DIV_DMC1_VAL
- ldr r2, =CLK_DIV_DMC1_OFFSET
- str r1, [r0, r2]
-
- /* CLK_DIV_LEFTBUS */
- ldr r1, =CLK_DIV_LEFTBUS_VAL
- ldr r2, =CLK_DIV_LEFTBUS_OFFSET
- str r1, [r0, r2]
-
- /* CLK_DIV_RIGHTBUS */
- ldr r1, =CLK_DIV_RIGHTBUS_VAL
- ldr r2, =CLK_DIV_RIGHTBUS_OFFSET
- str r1, [r0, r2]
-
- /* CLK_DIV_TOP */
- ldr r1, =CLK_DIV_TOP_VAL
- ldr r2, =CLK_DIV_TOP_OFFSET
- str r1, [r0, r2]
-
- /* MMC[0:1] */
- ldr r1, =CLK_DIV_FSYS1_VAL /* 800(MPLL) / (15 + 1) */
- ldr r2, =CLK_DIV_FSYS1_OFFSET
- str r1, [r0, r2]
-
- /* MMC[2:3] */
- ldr r1, =CLK_DIV_FSYS2_VAL /* 800(MPLL) / (15 + 1) */
- ldr r2, =CLK_DIV_FSYS2_OFFSET
- str r1, [r0, r2]
-
- /* MMC4 */
- ldr r1, =CLK_DIV_FSYS3_VAL /* 800(MPLL) / (15 + 1) */
- ldr r2, =CLK_DIV_FSYS3_OFFSET
- str r1, [r0, r2]
-
- /* CLK_DIV_PERIL0: UART Clock Divisors */
- ldr r1, =CLK_DIV_PERIL0_VAL
- ldr r2, =CLK_DIV_PERIL0_OFFSET
- str r1, [r0, r2]
-
- /* CAM, FIMC 0-3: CAM Clock Divisors */
- ldr r1, =CLK_DIV_CAM_VAL
- ldr r2, =CLK_DIV_CAM_OFFSET
- str r1, [r0, r2]
-
- /* CLK_DIV_MFC: MFC Clock Divisors */
- ldr r1, =CLK_DIV_MFC_VAL
- ldr r2, =CLK_DIV_MFC_OFFSET
- str r1, [r0, r2]
-
- /* CLK_DIV_G3D: G3D Clock Divisors */
- ldr r1, =CLK_DIV_G3D_VAL
- ldr r2, =CLK_DIV_G3D_OFFSET
- str r1, [r0, r2]
-
- /* CLK_DIV_LCD0: LCD0 Clock Divisors */
- ldr r1, =CLK_DIV_LCD0_VAL
- ldr r2, =CLK_DIV_LCD0_OFFSET
- str r1, [r0, r2]
-
- /* Set PLL locktime */
- ldr r1, =PLL_LOCKTIME
- ldr r2, =APLL_LOCK_OFFSET
- str r1, [r0, r2]
-
- ldr r1, =PLL_LOCKTIME
- ldr r2, =MPLL_LOCK_OFFSET
- str r1, [r0, r2]
-
- ldr r1, =PLL_LOCKTIME
- ldr r2, =EPLL_LOCK_OFFSET
- str r1, [r0, r2]
-
- ldr r1, =PLL_LOCKTIME
- ldr r2, =VPLL_LOCK_OFFSET
- str r1, [r0, r2]
-
- /* APLL_CON1 */
- ldr r1, =APLL_CON1_VAL
- ldr r2, =APLL_CON1_OFFSET
- str r1, [r0, r2]
-
- /* APLL_CON0 */
- ldr r1, =APLL_CON0_VAL
- ldr r2, =APLL_CON0_OFFSET
- str r1, [r0, r2]
-
- /* MPLL_CON1 */
- ldr r1, =MPLL_CON1_VAL
- ldr r2, =MPLL_CON1_OFFSET
- str r1, [r0, r2]
-
- /* MPLL_CON0 */
- ldr r1, =MPLL_CON0_VAL
- ldr r2, =MPLL_CON0_OFFSET
- str r1, [r0, r2]
-
- /* EPLL */
- ldr r1, =EPLL_CON1_VAL
- ldr r2, =EPLL_CON1_OFFSET
- str r1, [r0, r2]
-
- /* EPLL_CON0 */
- ldr r1, =EPLL_CON0_VAL
- ldr r2, =EPLL_CON0_OFFSET
- str r1, [r0, r2]
-
- /* VPLL_CON1 */
- ldr r1, =VPLL_CON1_VAL
- ldr r2, =VPLL_CON1_OFFSET
- str r1, [r0, r2]
-
- /* VPLL_CON0 */
- ldr r1, =VPLL_CON0_VAL
- ldr r2, =VPLL_CON0_OFFSET
- str r1, [r0, r2]
-
- /* wait ?us */
- mov r1, #0x30000
-4: subs r1, r1, #1
- bne 4b
-
- pop {pc}
-/*
- * uart_asm_init: Initialize UART in asm mode, 115200bps fixed.
- * void uart_asm_init(void)
- */
- .globl uart_asm_init
-uart_asm_init:
-
- /* setup UART0-UART3 GPIOs (part1) */
- mov r0, r7
- ldr r1, =EXYNOS4_GPIO_A0_CON_VAL
- str r1, [r0, #EXYNOS4_GPIO_A0_CON_OFFSET]
- ldr r1, =EXYNOS4_GPIO_A1_CON_VAL
- str r1, [r0, #EXYNOS4_GPIO_A1_CON_OFFSET]
-
- ldr r0, =EXYNOS4_UART_BASE
- add r0, r0, #EXYNOS4_DEFAULT_UART_OFFSET
-
- ldr r1, =ULCON_VAL
- str r1, [r0, #ULCON_OFFSET]
- ldr r1, =UCON_VAL
- str r1, [r0, #UCON_OFFSET]
- ldr r1, =UFCON_VAL
- str r1, [r0, #UFCON_OFFSET]
- ldr r1, =UBRDIV_VAL
- str r1, [r0, #UBRDIV_OFFSET]
- ldr r1, =UFRACVAL_VAL
- str r1, [r0, #UFRACVAL_OFFSET]
- mov pc, lr
- nop
- nop
- nop
-
-/* Setting TZPC[TrustZone Protection Controller] */
-tzpc_init:
- ldr r0, =TZPC0_BASE
- mov r1, #R0SIZE
- str r1, [r0]
- mov r1, #DECPROTXSET
- str r1, [r0, #TZPC_DECPROT0SET_OFFSET]
- str r1, [r0, #TZPC_DECPROT1SET_OFFSET]
- str r1, [r0, #TZPC_DECPROT2SET_OFFSET]
- str r1, [r0, #TZPC_DECPROT3SET_OFFSET]
-
- ldr r0, =TZPC1_BASE
- str r1, [r0, #TZPC_DECPROT0SET_OFFSET]
- str r1, [r0, #TZPC_DECPROT1SET_OFFSET]
- str r1, [r0, #TZPC_DECPROT2SET_OFFSET]
- str r1, [r0, #TZPC_DECPROT3SET_OFFSET]
-
- ldr r0, =TZPC2_BASE
- str r1, [r0, #TZPC_DECPROT0SET_OFFSET]
- str r1, [r0, #TZPC_DECPROT1SET_OFFSET]
- str r1, [r0, #TZPC_DECPROT2SET_OFFSET]
- str r1, [r0, #TZPC_DECPROT3SET_OFFSET]
-
- ldr r0, =TZPC3_BASE
- str r1, [r0, #TZPC_DECPROT0SET_OFFSET]
- str r1, [r0, #TZPC_DECPROT1SET_OFFSET]
- str r1, [r0, #TZPC_DECPROT2SET_OFFSET]
- str r1, [r0, #TZPC_DECPROT3SET_OFFSET]
-
- ldr r0, =TZPC4_BASE
- str r1, [r0, #TZPC_DECPROT0SET_OFFSET]
- str r1, [r0, #TZPC_DECPROT1SET_OFFSET]
- str r1, [r0, #TZPC_DECPROT2SET_OFFSET]
- str r1, [r0, #TZPC_DECPROT3SET_OFFSET]
-
- ldr r0, =TZPC5_BASE
- str r1, [r0, #TZPC_DECPROT0SET_OFFSET]
- str r1, [r0, #TZPC_DECPROT1SET_OFFSET]
- str r1, [r0, #TZPC_DECPROT2SET_OFFSET]
- str r1, [r0, #TZPC_DECPROT3SET_OFFSET]
-
- mov pc, lr
diff --git a/board/samsung/origen/mem_setup.S b/board/samsung/origen/mem_setup.S
deleted file mode 100644
index b49b193..0000000
--- a/board/samsung/origen/mem_setup.S
+++ /dev/null
@@ -1,421 +0,0 @@
-/*
- * Memory setup for ORIGEN board based on EXYNOS4210
- *
- * Copyright (C) 2011 Samsung Electronics
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include "origen_setup.h"
-#define SET_MIU
-
- .globl mem_ctrl_asm_init
-mem_ctrl_asm_init:
- /*
- * Async bridge configuration at CPU_core:
- * 1: half_sync
- * 0: full_sync
- */
- ldr r0, =ASYNC_CONFIG
- mov r1, #1
- str r1, [r0]
-
-#ifdef SET_MIU
- ldr r0, =EXYNOS4_MIU_BASE
- /* Interleave: 2Bit, Interleave_bit1: 0x21, Interleave_bit2: 0x7 */
- ldr r1, =0x20001507
- str r1, [r0, #APB_SFR_INTERLEAVE_CONF_OFFSET]
-
- /* Update MIU Configuration */
- ldr r1, =0x00000001
- str r1, [r0, #APB_SFR_ARBRITATION_CONF_OFFSET]
-#endif
- /* DREX0 */
- ldr r0, =EXYNOS4_DMC0_BASE
-
- /*
- * DLL Parameter Setting:
- * Termination: Enable R/W
- * Phase Delay for DQS Cleaning: 180' Shift
- */
- ldr r1, =0xe0000086
- str r1, [r0, #DMC_PHYCONTROL1]
-
- /*
- * ZQ Calibration
- * Termination: Disable
- * Auto Calibration Start: Enable
- */
- ldr r1, =0xE3855703
- str r1, [r0, #DMC_PHYZQCONTROL]
-
- /* Wait ?us*/
- mov r2, #0x100000
-1: subs r2, r2, #1
- bne 1b
-
- /*
- * Update DLL Information:
- * Force DLL Resyncronization
- */
- ldr r1, =0xe000008e
- str r1, [r0, #DMC_PHYCONTROL1]
-
- /* Reset Force DLL Resyncronization */
- ldr r1, =0xe0000086
- str r1, [r0, #DMC_PHYCONTROL1]
-
- /* Enable Differential DQS, DLL Off*/
- ldr r1, =0x71101008
- str r1, [r0, #DMC_PHYCONTROL0]
-
- /* Activate PHY DLL: DLL On */
- ldr r1, =0x7110100A
- str r1, [r0, #DMC_PHYCONTROL0]
-
- /* Set DLL Parameters */
- ldr r1, =0xe0000086
- str r1, [r0, #DMC_PHYCONTROL1]
-
- /* DLL Start */
- ldr r1, =0x7110100B
- str r1, [r0, #DMC_PHYCONTROL0]
-
- ldr r1, =0x00000000
- str r1, [r0, #DMC_PHYCONTROL2]
-
- /* Set Clock Ratio of Bus clock to Memory Clock */
- ldr r1, =0x0FFF301a
- str r1, [r0, #DMC_CONCONTROL]
-
- /*
- * Memor Burst length: 8
- * Number of chips: 2
- * Memory Bus width: 32 bit
- * Memory Type: DDR3
- * Additional Latancy for PLL: 1 Cycle
- */
- ldr r1, =0x00312640
- str r1, [r0, #DMC_MEMCONTROL]
-
- /*
- * Memory Configuration Chip 0
- * Address Mapping: Interleaved
- * Number of Column address Bits: 10 bits
- * Number of Rows Address Bits: 14
- * Number of Banks: 8
- */
- ldr r1, =0x20e01323
- str r1, [r0, #DMC_MEMCONFIG0]
-
- /*
- * Memory Configuration Chip 1
- * Address Mapping: Interleaved
- * Number of Column address Bits: 10 bits
- * Number of Rows Address Bits: 14
- * Number of Banks: 8
- */
- ldr r1, =0x40e01323
- str r1, [r0, #DMC_MEMCONFIG1]
-
- /* Config Precharge Policy */
- ldr r1, =0xff000000
- str r1, [r0, #DMC_PRECHCONFIG]
-
- /*
- * TimingAref, TimingRow, TimingData, TimingPower Setting:
- * Values as per Memory AC Parameters
- */
- ldr r1, =0x000000BB
- str r1, [r0, #DMC_TIMINGAREF]
- ldr r1, =0x4046654f
- str r1, [r0, #DMC_TIMINGROW]
- ldr r1, =0x46400506
- str r1, [r0, #DMC_TIMINGDATA]
- ldr r1, =0x52000A3C
- str r1, [r0, #DMC_TIMINGPOWER]
-
- /* Chip0: NOP Command: Assert and Hold CKE to high level */
- ldr r1, =0x07000000
- str r1, [r0, #DMC_DIRECTCMD]
-
- /* Wait ?us*/
- mov r2, #0x100000
-2: subs r2, r2, #1
- bne 2b
-
- /* Chip0: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */
- ldr r1, =0x00020000
- str r1, [r0, #DMC_DIRECTCMD]
- ldr r1, =0x00030000
- str r1, [r0, #DMC_DIRECTCMD]
- ldr r1, =0x00010002
- str r1, [r0, #DMC_DIRECTCMD]
- ldr r1, =0x00000328
- str r1, [r0, #DMC_DIRECTCMD]
-
- /* Wait ?us*/
- mov r2, #0x100000
-3: subs r2, r2, #1
- bne 3b
-
- /* Chip0: ZQINIT */
- ldr r1, =0x0a000000
- str r1, [r0, #DMC_DIRECTCMD]
-
- /* Wait ?us*/
- mov r2, #0x100000
-4: subs r2, r2, #1
- bne 4b
-
- /* Chip1: NOP Command: Assert and Hold CKE to high level */
- ldr r1, =0x07100000
- str r1, [r0, #DMC_DIRECTCMD]
-
- /* Wait ?us*/
- mov r2, #0x100000
-5: subs r2, r2, #1
- bne 5b
-
- /* Chip1: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */
- ldr r1, =0x00120000
- str r1, [r0, #DMC_DIRECTCMD]
- ldr r1, =0x00130000
- str r1, [r0, #DMC_DIRECTCMD]
- ldr r1, =0x00110002
- str r1, [r0, #DMC_DIRECTCMD]
- ldr r1, =0x00100328
- str r1, [r0, #DMC_DIRECTCMD]
-
- /* Wait ?us*/
- mov r2, #0x100000
-6: subs r2, r2, #1
- bne 6b
-
- /* Chip1: ZQINIT */
- ldr r1, =0x0a100000
- str r1, [r0, #DMC_DIRECTCMD]
-
- /* Wait ?us*/
- mov r2, #0x100000
-7: subs r2, r2, #1
- bne 7b
-
- ldr r1, =0xe000008e
- str r1, [r0, #DMC_PHYCONTROL1]
- ldr r1, =0xe0000086
- str r1, [r0, #DMC_PHYCONTROL1]
-
- /* Wait ?us*/
- mov r2, #0x100000
-8: subs r2, r2, #1
- bne 8b
-
- /* DREX1 */
- ldr r0, =EXYNOS4_DMC1_BASE @0x10410000
-
- /*
- * DLL Parameter Setting:
- * Termination: Enable R/W
- * Phase Delay for DQS Cleaning: 180' Shift
- */
- ldr r1, =0xe0000086
- str r1, [r0, #DMC_PHYCONTROL1]
-
- /*
- * ZQ Calibration:
- * Termination: Disable
- * Auto Calibration Start: Enable
- */
- ldr r1, =0xE3855703
- str r1, [r0, #DMC_PHYZQCONTROL]
-
- /* Wait ?us*/
- mov r2, #0x100000
-1: subs r2, r2, #1
- bne 1b
-
- /*
- * Update DLL Information:
- * Force DLL Resyncronization
- */
- ldr r1, =0xe000008e
- str r1, [r0, #DMC_PHYCONTROL1]
-
- /* Reset Force DLL Resyncronization */
- ldr r1, =0xe0000086
- str r1, [r0, #DMC_PHYCONTROL1]
-
- /* Enable Differential DQS, DLL Off*/
- ldr r1, =0x71101008
- str r1, [r0, #DMC_PHYCONTROL0]
-
- /* Activate PHY DLL: DLL On */
- ldr r1, =0x7110100A
- str r1, [r0, #DMC_PHYCONTROL0]
-
- /* Set DLL Parameters */
- ldr r1, =0xe0000086
- str r1, [r0, #DMC_PHYCONTROL1]
-
- /* DLL Start */
- ldr r1, =0x7110100B
- str r1, [r0, #DMC_PHYCONTROL0]
-
- ldr r1, =0x00000000
- str r1, [r0, #DMC_PHYCONTROL2]
-
- /* Set Clock Ratio of Bus clock to Memory Clock */
- ldr r1, =0x0FFF301a
- str r1, [r0, #DMC_CONCONTROL]
-
- /*
- * Memor Burst length: 8
- * Number of chips: 2
- * Memory Bus width: 32 bit
- * Memory Type: DDR3
- * Additional Latancy for PLL: 1 Cycle
- */
- ldr r1, =0x00312640
- str r1, [r0, #DMC_MEMCONTROL]
-
- /*
- * Memory Configuration Chip 0
- * Address Mapping: Interleaved
- * Number of Column address Bits: 10 bits
- * Number of Rows Address Bits: 14
- * Number of Banks: 8
- */
- ldr r1, =0x20e01323
- str r1, [r0, #DMC_MEMCONFIG0]
-
- /*
- * Memory Configuration Chip 1
- * Address Mapping: Interleaved
- * Number of Column address Bits: 10 bits
- * Number of Rows Address Bits: 14
- * Number of Banks: 8
- */
- ldr r1, =0x40e01323
- str r1, [r0, #DMC_MEMCONFIG1]
-
- /* Config Precharge Policy */
- ldr r1, =0xff000000
- str r1, [r0, #DMC_PRECHCONFIG]
-
- /*
- * TimingAref, TimingRow, TimingData, TimingPower Setting:
- * Values as per Memory AC Parameters
- */
- ldr r1, =0x000000BB
- str r1, [r0, #DMC_TIMINGAREF]
- ldr r1, =0x4046654f
- str r1, [r0, #DMC_TIMINGROW]
- ldr r1, =0x46400506
- str r1, [r0, #DMC_TIMINGDATA]
- ldr r1, =0x52000A3C
- str r1, [r0, #DMC_TIMINGPOWER]
-
- /* Chip0: NOP Command: Assert and Hold CKE to high level */
- ldr r1, =0x07000000
- str r1, [r0, #DMC_DIRECTCMD]
-
- /* Wait ?us*/
- mov r2, #0x100000
-2: subs r2, r2, #1
- bne 2b
-
- /* Chip0: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */
- ldr r1, =0x00020000
- str r1, [r0, #DMC_DIRECTCMD]
- ldr r1, =0x00030000
- str r1, [r0, #DMC_DIRECTCMD]
- ldr r1, =0x00010002
- str r1, [r0, #DMC_DIRECTCMD]
- ldr r1, =0x00000328
- str r1, [r0, #DMC_DIRECTCMD]
-
- /* Wait ?us*/
- mov r2, #0x100000
-3: subs r2, r2, #1
- bne 3b
-
- /* Chip 0: ZQINIT */
- ldr r1, =0x0a000000
- str r1, [r0, #DMC_DIRECTCMD]
-
- /* Wait ?us*/
- mov r2, #0x100000
-4: subs r2, r2, #1
- bne 4b
-
- /* Chip1: NOP Command: Assert and Hold CKE to high level */
- ldr r1, =0x07100000
- str r1, [r0, #DMC_DIRECTCMD]
-
- /* Wait ?us*/
- mov r2, #0x100000
-5: subs r2, r2, #1
- bne 5b
-
- /* Chip1: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */
- ldr r1, =0x00120000
- str r1, [r0, #DMC_DIRECTCMD]
- ldr r1, =0x00130000
- str r1, [r0, #DMC_DIRECTCMD]
- ldr r1, =0x00110002
- str r1, [r0, #DMC_DIRECTCMD]
- ldr r1, =0x00100328
- str r1, [r0, #DMC_DIRECTCMD]
-
- /* Wait ?us*/
- mov r2, #0x100000
-6: subs r2, r2, #1
- bne 6b
-
- /* Chip1: ZQINIT */
- ldr r1, =0x0a100000
- str r1, [r0, #DMC_DIRECTCMD]
-
- /* Wait ?us*/
- mov r2, #0x100000
-7: subs r2, r2, #1
- bne 7b
-
- ldr r1, =0xe000008e
- str r1, [r0, #DMC_PHYCONTROL1]
- ldr r1, =0xe0000086
- str r1, [r0, #DMC_PHYCONTROL1]
-
- /* Wait ?us*/
- mov r2, #0x100000
-8: subs r2, r2, #1
- bne 8b
-
- /* turn on DREX0, DREX1 */
- ldr r0, =EXYNOS4_DMC0_BASE
- ldr r1, =0x0FFF303a
- str r1, [r0, #DMC_CONCONTROL]
-
- ldr r0, =EXYNOS4_DMC1_BASE
- ldr r1, =0x0FFF303a
- str r1, [r0, #DMC_CONCONTROL]
-
- mov pc, lr
diff --git a/board/samsung/origen/mmc_boot.c b/board/samsung/origen/mmc_boot.c
deleted file mode 100644
index 072f161..0000000
--- a/board/samsung/origen/mmc_boot.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include<common.h>
-#include<config.h>
-
-/*
-* Copy U-boot from mmc to RAM:
-* COPY_BL2_FNPTR_ADDR: Address in iRAM, which Contains
-* Pointer to API (Data transfer from mmc to ram)
-*/
-void copy_uboot_to_ram(void)
-{
- u32 (*copy_bl2)(u32, u32, u32) = (void *) *(u32 *)COPY_BL2_FNPTR_ADDR;
-
- copy_bl2(BL2_START_OFFSET, BL2_SIZE_BLOC_COUNT, CONFIG_SYS_TEXT_BASE);
-}
-
-void board_init_f(unsigned long bootflag)
-{
- __attribute__((noreturn)) void (*uboot)(void);
- copy_uboot_to_ram();
-
- /* Jump to U-Boot image */
- uboot = (void *)CONFIG_SYS_TEXT_BASE;
- (*uboot)();
- /* Never returns Here */
-}
-
-/* Place Holders */
-void board_init_r(gd_t *id, ulong dest_addr)
-{
- /* Function attribute is no-return */
- /* This Function never executes */
- while (1)
- ;
-}
-
-void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3) {}
diff --git a/board/samsung/origen/origen.c b/board/samsung/origen/origen.c
index 638e7b1..b7dbb91 100644
--- a/board/samsung/origen/origen.c
+++ b/board/samsung/origen/origen.c
@@ -25,6 +25,8 @@
#include <asm/arch/cpu.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mmc.h>
+#include <asm/arch/periph.h>
+#include <asm/arch/pinmux.h>
DECLARE_GLOBAL_DATA_PTR;
struct exynos4_gpio_part1 *gpio1;
@@ -39,6 +41,50 @@
return 0;
}
+static int board_uart_init(void)
+{
+ int err;
+
+ err = exynos_pinmux_config(PERIPH_ID_UART0, PINMUX_FLAG_NONE);
+ if (err) {
+ debug("UART0 not configured\n");
+ return err;
+ }
+
+ err = exynos_pinmux_config(PERIPH_ID_UART1, PINMUX_FLAG_NONE);
+ if (err) {
+ debug("UART1 not configured\n");
+ return err;
+ }
+
+ err = exynos_pinmux_config(PERIPH_ID_UART2, PINMUX_FLAG_NONE);
+ if (err) {
+ debug("UART2 not configured\n");
+ return err;
+ }
+
+ err = exynos_pinmux_config(PERIPH_ID_UART3, PINMUX_FLAG_NONE);
+ if (err) {
+ debug("UART3 not configured\n");
+ return err;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+int board_early_init_f(void)
+{
+ int err;
+ err = board_uart_init();
+ if (err) {
+ debug("UART init failed\n");
+ return err;
+ }
+ return err;
+}
+#endif
+
int dram_init(void)
{
gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE)
diff --git a/board/samsung/smdk5250/Makefile b/board/samsung/smdk5250/Makefile
index 47c6a5a..9412e37 100644
--- a/board/samsung/smdk5250/Makefile
+++ b/board/samsung/smdk5250/Makefile
@@ -24,25 +24,20 @@
LIB = $(obj)lib$(BOARD).o
-SOBJS := lowlevel_init.o
-
-COBJS := clock_init.o
-COBJS += dmc_common.o dmc_init_ddr3.o
-COBJS += tzpc_init.o
COBJS += smdk5250_spl.o
ifndef CONFIG_SPL_BUILD
+ifdef CONFIG_OF_CONTROL
+COBJS += exynos5-dt.o
+else
COBJS += smdk5250.o
endif
-
-ifdef CONFIG_SPL_BUILD
-COBJS += spl_boot.o
endif
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
-ALL := $(obj).depend $(LIB)
+ALL := $(obj).depend $(LIB)
all: $(ALL)
diff --git a/board/samsung/smdk5250/exynos5-dt.c b/board/samsung/smdk5250/exynos5-dt.c
new file mode 100644
index 0000000..8131505
--- /dev/null
+++ b/board/samsung/smdk5250/exynos5-dt.c
@@ -0,0 +1,423 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <fdtdec.h>
+#include <asm/io.h>
+#include <errno.h>
+#include <i2c.h>
+#include <netdev.h>
+#include <spi.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/dwmmc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/power.h>
+#include <asm/arch/sromc.h>
+#include <power/pmic.h>
+#include <power/max77686_pmic.h>
+#include <tmu.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined CONFIG_EXYNOS_TMU
+/*
+ * Boot Time Thermal Analysis for SoC temperature threshold breach
+ */
+static void boot_temp_check(void)
+{
+ int temp;
+
+ switch (tmu_monitor(&temp)) {
+ /* Status TRIPPED ans WARNING means corresponding threshold breach */
+ case TMU_STATUS_TRIPPED:
+ puts("EXYNOS_TMU: TRIPPING! Device power going down ...\n");
+ set_ps_hold_ctrl();
+ hang();
+ break;
+ case TMU_STATUS_WARNING:
+ puts("EXYNOS_TMU: WARNING! Temperature very high\n");
+ break;
+ /*
+ * TMU_STATUS_INIT means something is wrong with temperature sensing
+ * and TMU status was changed back from NORMAL to INIT.
+ */
+ case TMU_STATUS_INIT:
+ default:
+ debug("EXYNOS_TMU: Unknown TMU state\n");
+ }
+}
+#endif
+
+#ifdef CONFIG_USB_EHCI_EXYNOS
+int board_usb_vbus_init(void)
+{
+ struct exynos5_gpio_part1 *gpio1 = (struct exynos5_gpio_part1 *)
+ samsung_get_base_gpio_part1();
+
+ /* Enable VBUS power switch */
+ s5p_gpio_direction_output(&gpio1->x2, 6, 1);
+
+ /* VBUS turn ON time */
+ mdelay(3);
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_SOUND_MAX98095
+static void board_enable_audio_codec(void)
+{
+ struct exynos5_gpio_part1 *gpio1 = (struct exynos5_gpio_part1 *)
+ samsung_get_base_gpio_part1();
+
+ /* Enable MAX98095 Codec */
+ s5p_gpio_direction_output(&gpio1->x1, 7, 1);
+ s5p_gpio_set_pull(&gpio1->x1, 7, GPIO_PULL_NONE);
+}
+#endif
+
+int board_init(void)
+{
+ gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL);
+
+#if defined CONFIG_EXYNOS_TMU
+ if (tmu_init(gd->fdt_blob) != TMU_STATUS_NORMAL) {
+ debug("%s: Failed to init TMU\n", __func__);
+ return -1;
+ }
+ boot_temp_check();
+#endif
+
+#ifdef CONFIG_EXYNOS_SPI
+ spi_init();
+#endif
+#ifdef CONFIG_USB_EHCI_EXYNOS
+ board_usb_vbus_init();
+#endif
+#ifdef CONFIG_SOUND_MAX98095
+ board_enable_audio_codec();
+#endif
+ return 0;
+}
+
+int dram_init(void)
+{
+ int i;
+ u32 addr;
+
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+ addr = CONFIG_SYS_SDRAM_BASE + (i * SDRAM_BANK_SIZE);
+ gd->ram_size += get_ram_size((long *)addr, SDRAM_BANK_SIZE);
+ }
+ return 0;
+}
+
+#if defined(CONFIG_POWER)
+static int pmic_reg_update(struct pmic *p, int reg, uint regval)
+{
+ u32 val;
+ int ret = 0;
+
+ ret = pmic_reg_read(p, reg, &val);
+ if (ret) {
+ debug("%s: PMIC %d register read failed\n", __func__, reg);
+ return -1;
+ }
+ val |= regval;
+ ret = pmic_reg_write(p, reg, val);
+ if (ret) {
+ debug("%s: PMIC %d register write failed\n", __func__, reg);
+ return -1;
+ }
+ return 0;
+}
+
+int power_init_board(void)
+{
+ struct pmic *p;
+
+ set_ps_hold_ctrl();
+
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+
+ if (pmic_init(I2C_PMIC))
+ return -1;
+
+ p = pmic_get("MAX77686_PMIC");
+ if (!p)
+ return -ENODEV;
+
+ if (pmic_probe(p))
+ return -1;
+
+ if (pmic_reg_update(p, MAX77686_REG_PMIC_32KHZ, MAX77686_32KHCP_EN))
+ return -1;
+
+ if (pmic_reg_update(p, MAX77686_REG_PMIC_BBAT,
+ MAX77686_BBCHOSTEN | MAX77686_BBCVS_3_5V))
+ return -1;
+
+ /* VDD_MIF */
+ if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK1OUT,
+ MAX77686_BUCK1OUT_1V)) {
+ debug("%s: PMIC %d register write failed\n", __func__,
+ MAX77686_REG_PMIC_BUCK1OUT);
+ return -1;
+ }
+
+ if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK1CRTL,
+ MAX77686_BUCK1CTRL_EN))
+ return -1;
+
+ /* VDD_ARM */
+ if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK2DVS1,
+ MAX77686_BUCK2DVS1_1_3V)) {
+ debug("%s: PMIC %d register write failed\n", __func__,
+ MAX77686_REG_PMIC_BUCK2DVS1);
+ return -1;
+ }
+
+ if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK2CTRL1,
+ MAX77686_BUCK2CTRL_ON))
+ return -1;
+
+ /* VDD_INT */
+ if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK3DVS1,
+ MAX77686_BUCK3DVS1_1_0125V)) {
+ debug("%s: PMIC %d register write failed\n", __func__,
+ MAX77686_REG_PMIC_BUCK3DVS1);
+ return -1;
+ }
+
+ if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK3CTRL,
+ MAX77686_BUCK3CTRL_ON))
+ return -1;
+
+ /* VDD_G3D */
+ if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK4DVS1,
+ MAX77686_BUCK4DVS1_1_2V)) {
+ debug("%s: PMIC %d register write failed\n", __func__,
+ MAX77686_REG_PMIC_BUCK4DVS1);
+ return -1;
+ }
+
+ if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK4CTRL1,
+ MAX77686_BUCK3CTRL_ON))
+ return -1;
+
+ /* VDD_LDO2 */
+ if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO2CTRL1,
+ MAX77686_LD02CTRL1_1_5V | EN_LDO))
+ return -1;
+
+ /* VDD_LDO3 */
+ if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO3CTRL1,
+ MAX77686_LD03CTRL1_1_8V | EN_LDO))
+ return -1;
+
+ /* VDD_LDO5 */
+ if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO5CTRL1,
+ MAX77686_LD05CTRL1_1_8V | EN_LDO))
+ return -1;
+
+ /* VDD_LDO10 */
+ if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO10CTRL1,
+ MAX77686_LD10CTRL1_1_8V | EN_LDO))
+ return -1;
+
+ return 0;
+}
+#endif
+
+void dram_init_banksize(void)
+{
+ int i;
+ u32 addr, size;
+
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+ addr = CONFIG_SYS_SDRAM_BASE + (i * SDRAM_BANK_SIZE);
+ size = get_ram_size((long *)addr, SDRAM_BANK_SIZE);
+
+ gd->bd->bi_dram[i].start = addr;
+ gd->bd->bi_dram[i].size = size;
+ }
+}
+
+static int decode_sromc(const void *blob, struct fdt_sromc *config)
+{
+ int err;
+ int node;
+
+ node = fdtdec_next_compatible(blob, 0, COMPAT_SAMSUNG_EXYNOS5_SROMC);
+ if (node < 0) {
+ debug("Could not find SROMC node\n");
+ return node;
+ }
+
+ config->bank = fdtdec_get_int(blob, node, "bank", 0);
+ config->width = fdtdec_get_int(blob, node, "width", 2);
+
+ err = fdtdec_get_int_array(blob, node, "srom-timing", config->timing,
+ FDT_SROM_TIMING_COUNT);
+ if (err < 0) {
+ debug("Could not decode SROMC configuration Error: %s\n",
+ fdt_strerror(err));
+ return -FDT_ERR_NOTFOUND;
+ }
+ return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+#ifdef CONFIG_SMC911X
+ u32 smc_bw_conf, smc_bc_conf;
+ struct fdt_sromc config;
+ fdt_addr_t base_addr;
+ int node;
+
+ node = decode_sromc(gd->fdt_blob, &config);
+ if (node < 0) {
+ debug("%s: Could not find sromc configuration\n", __func__);
+ return 0;
+ }
+ node = fdtdec_next_compatible(gd->fdt_blob, node, COMPAT_SMSC_LAN9215);
+ if (node < 0) {
+ debug("%s: Could not find lan9215 configuration\n", __func__);
+ return 0;
+ }
+
+ /* We now have a node, so any problems from now on are errors */
+ base_addr = fdtdec_get_addr(gd->fdt_blob, node, "reg");
+ if (base_addr == FDT_ADDR_T_NONE) {
+ debug("%s: Could not find lan9215 address\n", __func__);
+ return -1;
+ }
+
+ /* Ethernet needs data bus width of 16 bits */
+ if (config.width != 2) {
+ debug("%s: Unsupported bus width %d\n", __func__,
+ config.width);
+ return -1;
+ }
+ smc_bw_conf = SROMC_DATA16_WIDTH(config.bank)
+ | SROMC_BYTE_ENABLE(config.bank);
+
+ smc_bc_conf = SROMC_BC_TACS(config.timing[FDT_SROM_TACS]) |
+ SROMC_BC_TCOS(config.timing[FDT_SROM_TCOS]) |
+ SROMC_BC_TACC(config.timing[FDT_SROM_TACC]) |
+ SROMC_BC_TCOH(config.timing[FDT_SROM_TCOH]) |
+ SROMC_BC_TAH(config.timing[FDT_SROM_TAH]) |
+ SROMC_BC_TACP(config.timing[FDT_SROM_TACP]) |
+ SROMC_BC_PMC(config.timing[FDT_SROM_PMC]);
+
+ /* Select and configure the SROMC bank */
+ exynos_pinmux_config(PERIPH_ID_SROMC, config.bank);
+ s5p_config_sromc(config.bank, smc_bw_conf, smc_bc_conf);
+ return smc911x_initialize(0, base_addr);
+#endif
+ return 0;
+}
+
+#ifdef CONFIG_DISPLAY_BOARDINFO
+int checkboard(void)
+{
+ const char *board_name;
+
+ board_name = fdt_getprop(gd->fdt_blob, 0, "model", NULL);
+ if (board_name == NULL)
+ printf("\nUnknown Board\n");
+ else
+ printf("\nBoard: %s\n", board_name);
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_GENERIC_MMC
+int board_mmc_init(bd_t *bis)
+{
+ int ret;
+ /* dwmmc initializattion for available channels */
+ ret = exynos_dwmmc_init(gd->fdt_blob);
+ if (ret)
+ debug("dwmmc init failed\n");
+
+ return ret;
+}
+#endif
+
+static int board_uart_init(void)
+{
+ int err, uart_id, ret = 0;
+
+ for (uart_id = PERIPH_ID_UART0; uart_id <= PERIPH_ID_UART3; uart_id++) {
+ err = exynos_pinmux_config(uart_id, PINMUX_FLAG_NONE);
+ if (err) {
+ debug("UART%d not configured\n",
+ (uart_id - PERIPH_ID_UART0));
+ ret |= err;
+ }
+ }
+ return ret;
+}
+
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+int board_early_init_f(void)
+{
+ int err;
+ err = board_uart_init();
+ if (err) {
+ debug("UART init failed\n");
+ return err;
+ }
+#ifdef CONFIG_SYS_I2C_INIT_BOARD
+ board_i2c_init(gd->fdt_blob);
+#endif
+ return err;
+}
+#endif
+
+#ifdef CONFIG_LCD
+void exynos_cfg_lcd_gpio(void)
+{
+ struct exynos5_gpio_part1 *gpio1 =
+ (struct exynos5_gpio_part1 *)samsung_get_base_gpio_part1();
+
+ /* For Backlight */
+ s5p_gpio_cfg_pin(&gpio1->b2, 0, GPIO_OUTPUT);
+ s5p_gpio_set_value(&gpio1->b2, 0, 1);
+
+ /* LCD power on */
+ s5p_gpio_cfg_pin(&gpio1->x1, 5, GPIO_OUTPUT);
+ s5p_gpio_set_value(&gpio1->x1, 5, 1);
+
+ /* Set Hotplug detect for DP */
+ s5p_gpio_cfg_pin(&gpio1->x0, 7, GPIO_FUNC(0x3));
+}
+
+void exynos_set_dp_phy(unsigned int onoff)
+{
+ set_dp_phy_ctrl(onoff);
+}
+#endif
diff --git a/board/samsung/smdk5250/lowlevel_init.S b/board/samsung/smdk5250/lowlevel_init.S
index bc6cb6f..edc565e 100644
--- a/board/samsung/smdk5250/lowlevel_init.S
+++ b/board/samsung/smdk5250/lowlevel_init.S
@@ -75,12 +75,14 @@
bl mem_ctrl_init
1:
+ bl arch_cpu_init
bl tzpc_init
ldmia r13!, {ip,pc}
wakeup_reset:
bl system_clock_init
bl mem_ctrl_init
+ bl arch_cpu_init
bl tzpc_init
exit_wakeup:
diff --git a/board/samsung/smdk5250/smdk5250.c b/board/samsung/smdk5250/smdk5250.c
index 8b09e1d..f1d3d97 100644
--- a/board/samsung/smdk5250/smdk5250.c
+++ b/board/samsung/smdk5250/smdk5250.c
@@ -29,6 +29,7 @@
#include <netdev.h>
#include <spi.h>
#include <asm/arch/cpu.h>
+#include <asm/arch/dwmmc.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mmc.h>
#include <asm/arch/pinmux.h>
@@ -37,39 +38,9 @@
#include <asm/arch/dp_info.h>
#include <power/pmic.h>
#include <power/max77686_pmic.h>
-#include <tmu.h>
DECLARE_GLOBAL_DATA_PTR;
-#if defined CONFIG_EXYNOS_TMU
-/*
- * Boot Time Thermal Analysis for SoC temperature threshold breach
- */
-static void boot_temp_check(void)
-{
- int temp;
-
- switch (tmu_monitor(&temp)) {
- /* Status TRIPPED ans WARNING means corresponding threshold breach */
- case TMU_STATUS_TRIPPED:
- puts("EXYNOS_TMU: TRIPPING! Device power going down ...\n");
- set_ps_hold_ctrl();
- hang();
- break;
- case TMU_STATUS_WARNING:
- puts("EXYNOS_TMU: WARNING! Temperature very high\n");
- break;
- /*
- * TMU_STATUS_INIT means something is wrong with temperature sensing
- * and TMU status was changed back from NORMAL to INIT.
- */
- case TMU_STATUS_INIT:
- default:
- debug("EXYNOS_TMU: Unknown TMU state\n");
- }
-}
-#endif
-
#ifdef CONFIG_USB_EHCI_EXYNOS
int board_usb_vbus_init(void)
{
@@ -102,14 +73,6 @@
{
gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL);
-#if defined CONFIG_EXYNOS_TMU
- if (tmu_init(gd->fdt_blob) != TMU_STATUS_NORMAL) {
- debug("%s: Failed to init TMU\n", __func__);
- return -1;
- }
- boot_temp_check();
-#endif
-
#ifdef CONFIG_EXYNOS_SPI
spi_init();
#endif
@@ -124,14 +87,13 @@
int dram_init(void)
{
- gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE)
- + get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE)
- + get_ram_size((long *)PHYS_SDRAM_3, PHYS_SDRAM_3_SIZE)
- + get_ram_size((long *)PHYS_SDRAM_4, PHYS_SDRAM_4_SIZE)
- + get_ram_size((long *)PHYS_SDRAM_5, PHYS_SDRAM_7_SIZE)
- + get_ram_size((long *)PHYS_SDRAM_6, PHYS_SDRAM_7_SIZE)
- + get_ram_size((long *)PHYS_SDRAM_7, PHYS_SDRAM_7_SIZE)
- + get_ram_size((long *)PHYS_SDRAM_8, PHYS_SDRAM_8_SIZE);
+ int i;
+ u32 addr;
+
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+ addr = CONFIG_SYS_SDRAM_BASE + (i * SDRAM_BANK_SIZE);
+ gd->ram_size += get_ram_size((long *)addr, SDRAM_BANK_SIZE);
+ }
return 0;
}
@@ -182,7 +144,7 @@
/* VDD_MIF */
if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK1OUT,
- MAX77686_BUCK1OUT_1V)) {
+ MAX77686_BUCK1OUT_1_05V)) {
debug("%s: PMIC %d register write failed\n", __func__,
MAX77686_REG_PMIC_BUCK1OUT);
return -1;
@@ -254,57 +216,15 @@
void dram_init_banksize(void)
{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = get_ram_size((long *)PHYS_SDRAM_1,
- PHYS_SDRAM_1_SIZE);
- gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
- gd->bd->bi_dram[1].size = get_ram_size((long *)PHYS_SDRAM_2,
- PHYS_SDRAM_2_SIZE);
- gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
- gd->bd->bi_dram[2].size = get_ram_size((long *)PHYS_SDRAM_3,
- PHYS_SDRAM_3_SIZE);
- gd->bd->bi_dram[3].start = PHYS_SDRAM_4;
- gd->bd->bi_dram[3].size = get_ram_size((long *)PHYS_SDRAM_4,
- PHYS_SDRAM_4_SIZE);
- gd->bd->bi_dram[4].start = PHYS_SDRAM_5;
- gd->bd->bi_dram[4].size = get_ram_size((long *)PHYS_SDRAM_5,
- PHYS_SDRAM_5_SIZE);
- gd->bd->bi_dram[5].start = PHYS_SDRAM_6;
- gd->bd->bi_dram[5].size = get_ram_size((long *)PHYS_SDRAM_6,
- PHYS_SDRAM_6_SIZE);
- gd->bd->bi_dram[6].start = PHYS_SDRAM_7;
- gd->bd->bi_dram[6].size = get_ram_size((long *)PHYS_SDRAM_7,
- PHYS_SDRAM_7_SIZE);
- gd->bd->bi_dram[7].start = PHYS_SDRAM_8;
- gd->bd->bi_dram[7].size = get_ram_size((long *)PHYS_SDRAM_8,
- PHYS_SDRAM_8_SIZE);
-}
-
-#ifdef CONFIG_OF_CONTROL
-static int decode_sromc(const void *blob, struct fdt_sromc *config)
-{
- int err;
- int node;
-
- node = fdtdec_next_compatible(blob, 0, COMPAT_SAMSUNG_EXYNOS5_SROMC);
- if (node < 0) {
- debug("Could not find SROMC node\n");
- return node;
+ int i;
+ u32 addr, size;
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+ addr = CONFIG_SYS_SDRAM_BASE + (i * SDRAM_BANK_SIZE);
+ size = get_ram_size((long *)addr, SDRAM_BANK_SIZE);
+ gd->bd->bi_dram[i].start = addr;
+ gd->bd->bi_dram[i].size = size;
}
-
- config->bank = fdtdec_get_int(blob, node, "bank", 0);
- config->width = fdtdec_get_int(blob, node, "width", 2);
-
- err = fdtdec_get_int_array(blob, node, "srom-timing", config->timing,
- FDT_SROM_TIMING_COUNT);
- if (err < 0) {
- debug("Could not decode SROMC configuration\n");
- return -FDT_ERR_NOTFOUND;
- }
-
- return 0;
}
-#endif
int board_eth_init(bd_t *bis)
{
@@ -313,27 +233,6 @@
struct fdt_sromc config;
fdt_addr_t base_addr;
-#ifdef CONFIG_OF_CONTROL
- int node;
-
- node = decode_sromc(gd->fdt_blob, &config);
- if (node < 0) {
- debug("%s: Could not find sromc configuration\n", __func__);
- return 0;
- }
- node = fdtdec_next_compatible(gd->fdt_blob, node, COMPAT_SMSC_LAN9215);
- if (node < 0) {
- debug("%s: Could not find lan9215 configuration\n", __func__);
- return 0;
- }
-
- /* We now have a node, so any problems from now on are errors */
- base_addr = fdtdec_get_addr(gd->fdt_blob, node, "reg");
- if (base_addr == FDT_ADDR_T_NONE) {
- debug("%s: Could not find lan9215 address\n", __func__);
- return -1;
- }
-#else
/* Non-FDT configuration - bank number and timing parameters*/
config.bank = CONFIG_ENV_SROM_BANK;
config.width = 2;
@@ -346,7 +245,6 @@
config.timing[FDT_SROM_TACP] = 0x09;
config.timing[FDT_SROM_PMC] = 0x01;
base_addr = CONFIG_SMC911X_BASE;
-#endif
/* Ethernet needs data bus width of 16 bits */
if (config.width != 2) {
@@ -376,17 +274,7 @@
#ifdef CONFIG_DISPLAY_BOARDINFO
int checkboard(void)
{
-#ifdef CONFIG_OF_CONTROL
- const char *board_name;
-
- board_name = fdt_getprop(gd->fdt_blob, 0, "model", NULL);
- if (board_name == NULL)
- printf("\nUnknown Board\n");
- else
- printf("\nBoard: %s\n", board_name);
-#else
printf("\nBoard: SMDK5250\n");
-#endif
return 0;
}
#endif
@@ -394,48 +282,64 @@
#ifdef CONFIG_GENERIC_MMC
int board_mmc_init(bd_t *bis)
{
- int err;
+ int err, ret = 0, index, bus_width;
+ u32 base;
err = exynos_pinmux_config(PERIPH_ID_SDMMC0, PINMUX_FLAG_8BIT_MODE);
- if (err) {
+ if (err)
debug("SDMMC0 not configured\n");
- return err;
- }
+ ret |= err;
- err = s5p_mmc_init(0, 8);
- return err;
+ /*EMMC: dwmmc Channel-0 with 8 bit bus width */
+ index = 0;
+ base = samsung_get_base_mmc() + (0x10000 * index);
+ bus_width = 8;
+ err = exynos_dwmci_add_port(index, base, bus_width, (u32)NULL);
+ if (err)
+ debug("dwmmc Channel-0 init failed\n");
+ ret |= err;
+
+ err = exynos_pinmux_config(PERIPH_ID_SDMMC2, PINMUX_FLAG_NONE);
+ if (err)
+ debug("SDMMC2 not configured\n");
+ ret |= err;
+
+ /*SD: dwmmc Channel-2 with 4 bit bus width */
+ index = 2;
+ base = samsung_get_base_mmc() + (0x10000 * index);
+ bus_width = 4;
+ err = exynos_dwmci_add_port(index, base, bus_width, (u32)NULL);
+ if (err)
+ debug("dwmmc Channel-2 init failed\n");
+ ret |= err;
+
+ return ret;
}
#endif
static int board_uart_init(void)
{
- int err;
+ int err, uart_id, ret = 0;
- err = exynos_pinmux_config(PERIPH_ID_UART0, PINMUX_FLAG_NONE);
- if (err) {
- debug("UART0 not configured\n");
- return err;
+ for (uart_id = PERIPH_ID_UART0; uart_id <= PERIPH_ID_UART3; uart_id++) {
+ err = exynos_pinmux_config(uart_id, PINMUX_FLAG_NONE);
+ if (err) {
+ debug("UART%d not configured\n",
+ (uart_id - PERIPH_ID_UART0));
+ ret |= err;
+ }
}
+ return ret;
+}
- err = exynos_pinmux_config(PERIPH_ID_UART1, PINMUX_FLAG_NONE);
- if (err) {
- debug("UART1 not configured\n");
- return err;
+void board_i2c_init(const void *blob)
+{
+ int i;
+
+ for (i = 0; i < CONFIG_MAX_I2C_NUM; i++) {
+ exynos_pinmux_config((PERIPH_ID_I2C0 + i),
+ PINMUX_FLAG_NONE);
}
-
- err = exynos_pinmux_config(PERIPH_ID_UART2, PINMUX_FLAG_NONE);
- if (err) {
- debug("UART2 not configured\n");
- return err;
- }
-
- err = exynos_pinmux_config(PERIPH_ID_UART3, PINMUX_FLAG_NONE);
- if (err) {
- debug("UART3 not configured\n");
- return err;
- }
-
- return 0;
}
#ifdef CONFIG_BOARD_EARLY_INIT_F
@@ -448,7 +352,7 @@
return err;
}
#ifdef CONFIG_SYS_I2C_INIT_BOARD
- board_i2c_init(gd->fdt_blob);
+ board_i2c_init(NULL);
#endif
return err;
}
@@ -477,7 +381,6 @@
set_dp_phy_ctrl(onoff);
}
-#ifndef CONFIG_OF_CONTROL
vidinfo_t panel_info = {
.vl_freq = 60,
.vl_col = 2560,
@@ -543,13 +446,9 @@
.edp_dev_info = &edp_info,
};
-#endif
void init_panel_info(vidinfo_t *vid)
{
-#ifndef CONFIG_OF_CONTROL
- vid->rgb_mode = MODE_RGB_P,
-
+ vid->rgb_mode = MODE_RGB_P;
exynos_set_dp_platform_data(&dp_platform_data);
-#endif
}
#endif
diff --git a/board/samsung/smdk5250/spl_boot.c b/board/samsung/smdk5250/spl_boot.c
deleted file mode 100644
index c0bcf46..0000000
--- a/board/samsung/smdk5250/spl_boot.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * Copyright (C) 2012 Samsung Electronics
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include<common.h>
-#include<config.h>
-
-enum boot_mode {
- BOOT_MODE_MMC = 4,
- BOOT_MODE_SERIAL = 20,
- /* Boot based on Operating Mode pin settings */
- BOOT_MODE_OM = 32,
- BOOT_MODE_USB, /* Boot using USB download */
-};
-
- typedef u32 (*spi_copy_func_t)(u32 offset, u32 nblock, u32 dst);
- typedef u32 (*usb_copy_func_t)(void);
-
-/*
- * Set/clear program flow prediction and return the previous state.
- */
-static int config_branch_prediction(int set_cr_z)
-{
- unsigned int cr;
-
- /* System Control Register: 11th bit Z Branch prediction enable */
- cr = get_cr();
- set_cr(set_cr_z ? cr | CR_Z : cr & ~CR_Z);
-
- return cr & CR_Z;
-}
-
-/*
-* Copy U-boot from mmc to RAM:
-* COPY_BL2_FNPTR_ADDR: Address in iRAM, which Contains
-* Pointer to API (Data transfer from mmc to ram)
-*/
-void copy_uboot_to_ram(void)
-{
- spi_copy_func_t spi_copy;
- usb_copy_func_t usb_copy;
-
- int is_cr_z_set;
- unsigned int sec_boot_check;
- enum boot_mode bootmode = BOOT_MODE_OM;
- u32 (*copy_bl2)(u32, u32, u32);
-
- /* Read iRAM location to check for secondary USB boot mode */
- sec_boot_check = readl(EXYNOS_IRAM_SECONDARY_BASE);
- if (sec_boot_check == EXYNOS_USB_SECONDARY_BOOT)
- bootmode = BOOT_MODE_USB;
-
- if (bootmode == BOOT_MODE_OM)
- bootmode = readl(EXYNOS5_POWER_BASE) & OM_STAT;
-
- switch (bootmode) {
- case BOOT_MODE_SERIAL:
- spi_copy = *(spi_copy_func_t *)EXYNOS_COPY_SPI_FNPTR_ADDR;
- spi_copy(SPI_FLASH_UBOOT_POS, CONFIG_BL2_SIZE,
- CONFIG_SYS_TEXT_BASE);
- break;
- case BOOT_MODE_MMC:
- copy_bl2 = (void *) *(u32 *)COPY_BL2_FNPTR_ADDR;
- copy_bl2(BL2_START_OFFSET, BL2_SIZE_BLOC_COUNT,
- CONFIG_SYS_TEXT_BASE);
- break;
- case BOOT_MODE_USB:
- /*
- * iROM needs program flow prediction to be disabled
- * before copy from USB device to RAM
- */
- is_cr_z_set = config_branch_prediction(0);
- usb_copy = *(usb_copy_func_t *)
- EXYNOS_COPY_USB_FNPTR_ADDR;
- usb_copy();
- config_branch_prediction(is_cr_z_set);
- break;
- default:
- break;
- }
-}
-
-void board_init_f(unsigned long bootflag)
-{
- __attribute__((noreturn)) void (*uboot)(void);
- copy_uboot_to_ram();
-
- /* Jump to U-Boot image */
- uboot = (void *)CONFIG_SYS_TEXT_BASE;
- (*uboot)();
- /* Never returns Here */
-}
-
-/* Place Holders */
-void board_init_r(gd_t *id, ulong dest_addr)
-{
- /* Function attribute is no-return */
- /* This Function never executes */
- while (1)
- ;
-}
-
-void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3) {}
diff --git a/board/samsung/smdkv310/Makefile b/board/samsung/smdkv310/Makefile
index 56e0c16..c4cd0a3 100644
--- a/board/samsung/smdkv310/Makefile
+++ b/board/samsung/smdkv310/Makefile
@@ -24,18 +24,12 @@
LIB = $(obj)lib$(BOARD).o
-SOBJS := mem_setup.o
-SOBJS += lowlevel_init.o
ifndef CONFIG_SPL_BUILD
COBJS += smdkv310.o
endif
-ifdef CONFIG_SPL_BUILD
-COBJS += mmc_boot.o
-endif
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
ALL := $(obj).depend $(LIB)
diff --git a/board/samsung/smdkv310/lowlevel_init.S b/board/samsung/smdkv310/lowlevel_init.S
deleted file mode 100644
index 7a1ea98..0000000
--- a/board/samsung/smdkv310/lowlevel_init.S
+++ /dev/null
@@ -1,470 +0,0 @@
-/*
- * Lowlevel setup for SMDKV310 board based on EXYNOS4210
- *
- * Copyright (C) 2011 Samsung Electronics
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-#include <asm/arch/cpu.h>
-
-/*
- * Register usages:
- *
- * r5 has zero always
- * r7 has GPIO part1 base 0x11400000
- * r6 has GPIO part2 base 0x11000000
- */
-
-#define MEM_DLLl_ON
-
-_TEXT_BASE:
- .word CONFIG_SYS_TEXT_BASE
-
- .globl lowlevel_init
-lowlevel_init:
- push {lr}
-
- /* r5 has always zero */
- mov r5, #0
- ldr r7, =EXYNOS4_GPIO_PART1_BASE
- ldr r6, =EXYNOS4_GPIO_PART2_BASE
-
- /* check reset status */
- ldr r0, =(EXYNOS4_POWER_BASE + 0x81C) @ INFORM7
- ldr r1, [r0]
-
- /* AFTR wakeup reset */
- ldr r2, =S5P_CHECK_DIDLE
- cmp r1, r2
- beq exit_wakeup
-
- /* Sleep wakeup reset */
- ldr r2, =S5P_CHECK_SLEEP
- cmp r1, r2
- beq wakeup_reset
-
- /*
- * If U-boot is already running in ram, no need to relocate U-Boot.
- * Memory controller must be configured before relocating U-Boot
- * in ram.
- */
- ldr r0, =0x00ffffff /* r0 <- Mask Bits*/
- bic r1, pc, r0 /* pc <- current addr of code */
- /* r1 <- unmasked bits of pc */
-
- ldr r2, _TEXT_BASE /* r2 <- original base addr in ram */
- bic r2, r2, r0 /* r2 <- unmasked bits of r2*/
- cmp r1, r2 /* compare r1, r2 */
- beq 1f /* r0 == r1 then skip sdram init */
-
- /* init system clock */
- bl system_clock_init
-
- /* Memory initialize */
- bl mem_ctrl_asm_init
-
-1:
- /* for UART */
- bl uart_asm_init
- bl tzpc_init
- pop {pc}
-
-wakeup_reset:
- bl system_clock_init
- bl mem_ctrl_asm_init
- bl tzpc_init
-
-exit_wakeup:
- /* Load return address and jump to kernel */
- ldr r0, =(EXYNOS4_POWER_BASE + 0x800) @ INFORM0
-
- /* r1 = physical address of exynos4210_cpu_resume function */
- ldr r1, [r0]
-
- /* Jump to kernel*/
- mov pc, r1
- nop
- nop
-
-/*
- * system_clock_init: Initialize core clock and bus clock.
- * void system_clock_init(void)
- */
-system_clock_init:
- push {lr}
- ldr r0, =EXYNOS4_CLOCK_BASE
-
- /* APLL(1), MPLL(1), CORE(0), HPM(0) */
- ldr r1, =0x0101
- ldr r2, =0x14200 @CLK_SRC_CPU
- str r1, [r0, r2]
-
- /* wait ?us */
- mov r1, #0x10000
-2: subs r1, r1, #1
- bne 2b
-
- ldr r1, =0x00
- ldr r2, =0x0C210 @CLK_SRC_TOP0
- str r1, [r0, r2]
-
- ldr r1, =0x00
- ldr r2, =0x0C214 @CLK_SRC_TOP1_OFFSET
- str r1, [r0, r2]
-
- /* DMC */
- ldr r1, =0x00
- ldr r2, =0x10200 @CLK_SRC_DMC_OFFSET
- str r1, [r0, r2]
-
- /*CLK_SRC_LEFTBUS */
- ldr r1, =0x00
- ldr r2, =0x04200 @CLK_SRC_LEFTBUS_OFFSET
- str r1, [r0, r2]
-
- /*CLK_SRC_RIGHTBUS */
- ldr r1, =0x00
- ldr r2, =0x08200 @CLK_SRC_RIGHTBUS_OFFSET
- str r1, [r0, r2]
-
- /* SATA: SCLKMPLL(0), MMC[0:4]: SCLKMPLL(6) */
- ldr r1, =0x066666
- ldr r2, =0x0C240 @ CLK_SRC_FSYS
- str r1, [r0, r2]
-
- /* UART[0:4], PWM: SCLKMPLL(6) */
- ldr r1, =0x06666666
- ldr r2, =0x0C250 @CLK_SRC_PERIL0_OFFSET
- str r1, [r0, r2]
-
- /* wait ?us */
- mov r1, #0x10000
-3: subs r1, r1, #1
- bne 3b
-
- /*
- * CLK_DIV_CPU0:
- *
- * PCLK_DBG_RATIO[20] 0x1
- * ATB_RATIO[16] 0x3
- * PERIPH_RATIO[12] 0x3
- * COREM1_RATIO[8] 0x7
- * COREM0_RATIO[4] 0x3
- */
- ldr r1, =0x0133730
- ldr r2, =0x14500 @CLK_DIV_CPU0_OFFSET
- str r1, [r0, r2]
-
- /* CLK_DIV_CPU1: COPY_RATIO [0] 0x3 */
- ldr r1, =0x03
- ldr r2, =0x14504 @CLK_DIV_CPU1_OFFSET
- str r1, [r0, r2]
-
- /*
- * CLK_DIV_DMC0:
- *
- * CORE_TIMERS_RATIO[28] 0x1
- * COPY2_RATIO[24] 0x3
- * DMCP_RATIO[20] 0x1
- * DMCD_RATIO[16] 0x1
- * DMC_RATIO[12] 0x1
- * DPHY_RATIO[8] 0x1
- * ACP_PCLK_RATIO[4] 0x1
- * ACP_RATIO[0] 0x3
- */
- ldr r1, =0x13111113
- ldr r2, =0x010500 @CLK_DIV_DMC0_OFFSET
- str r1, [r0, r2]
-
- /*
- * CLK_DIV_DMC1:
- *
- * DPM_RATIO[24] 0x1
- * DVSEM_RATIO[16] 0x1
- * PWI_RATIO[8] 0x1
- */
- ldr r1, =0x01010100
- ldr r2, =0x010504 @CLK_DIV_DMC1_OFFSET
- str r1, [r0, r2]
-
- /*
- * CLK_DIV_LEFRBUS:
- *
- * GPL_RATIO[4] 0x1
- * GDL_RATIO[0] 0x3
- */
- ldr r1, =0x013
- ldr r2, =0x04500 @CLK_DIV_LEFTBUS_OFFSET
- str r1, [r0, r2]
-
- /*
- * CLK_DIV_RIGHTBUS:
- *
- * GPR_RATIO[4] 0x1
- * GDR_RATIO[0] 0x3
- */
- ldr r1, =0x013
- ldr r2, =0x08500 @CLK_DIV_RIGHTBUS_OFFSET
- str r1, [r0, r2]
-
- /*
- * CLK_DIV_TOP:
- *
- * ONENAND_RATIO[16] 0x0
- * ACLK_133_RATIO[12] 0x5
- * ACLK_160_RATIO[8] 0x4
- * ACLK_100_RATIO[4] 0x7
- * ACLK_200_RATIO[0] 0x3
- */
- ldr r1, =0x05473
- ldr r2, =0x0C510 @CLK_DIV_TOP_OFFSET
- str r1, [r0, r2]
-
- /* MMC[0:1] */
- ldr r1, =0x000f000f /* 800(MPLL) / (15 + 1) */
- ldr r2, =0x0C544 @ CLK_DIV_FSYS1
- str r1, [r0, r2]
-
- /* MMC[2:3] */
- ldr r1, =0x000f000f /* 800(MPLL) / (15 + 1) */
- ldr r2, =0x0C548 @ CLK_DIV_FSYS2
- str r1, [r0, r2]
-
- /* MMC4 */
- ldr r1, =0x000f /* 800(MPLL) / (15 + 1) */
- ldr r2, =0x0C54C @ CLK_DIV_FSYS3
- str r1, [r0, r2]
-
- /* wait ?us */
- mov r1, #0x10000
-4: subs r1, r1, #1
- bne 4b
-
- /*
- * CLK_DIV_PERIL0:
- *
- * UART5_RATIO[20] 8
- * UART4_RATIO[16] 8
- * UART3_RATIO[12] 8
- * UART2_RATIO[8] 8
- * UART1_RATIO[4] 8
- * UART0_RATIO[0] 8
- */
- ldr r1, =0x774777
- ldr r2, =0x0C550 @CLK_DIV_PERIL0_OFFSET
- str r1, [r0, r2]
-
- /* SLIMBUS: ???, PWM */
- ldr r1, =0x8
- ldr r2, =0x0C55C @ CLK_DIV_PERIL3
- str r1, [r0, r2]
-
- /* Set PLL locktime */
- ldr r1, =0x01C20
- ldr r2, =0x014000 @APLL_LOCK_OFFSET
- str r1, [r0, r2]
- ldr r1, =0x01C20
- ldr r2, =0x014008 @MPLL_LOCK_OFFSET
- str r1, [r0, r2]
- ldr r1, =0x01C20
- ldr r2, =0x0C010 @EPLL_LOCK_OFFSET
- str r1, [r0, r2]
- ldr r1, =0x01C20
- ldr r2, =0x0C020 @VPLL_LOCK_OFFSET
- str r1, [r0, r2]
-
- /*
- * APLL_CON1:
- *
- * APLL_AFC_ENB[31] 0x1
- * APLL_AFC[0] 0xC
- */
- ldr r1, =0x8000000C
- ldr r2, =0x014104 @APLL_CON1_OFFSET
- str r1, [r0, r2]
-
- /*
- * APLL_CON0:
- *
- * APLL_MDIV[16] 0xFA
- * APLL_PDIV[8] 0x6
- * APLL_SDIV[0] 0x1
- */
- ldr r1, =0x80FA0601
- ldr r2, =0x014100 @APLL_CON0_OFFSET
- str r1, [r0, r2]
-
- /*
- * MPLL_CON1:
- *
- * MPLL_AFC_ENB[31] 0x1
- * MPLL_AFC[0] 0x1C
- */
- ldr r1, =0x0000001C
- ldr r2, =0x01410C @MPLL_CON1_OFFSET
- str r1, [r0, r2]
-
- /*
- * MPLL_CON0:
- *
- * MPLL_MDIV[16] 0xC8
- * MPLL_PDIV[8] 0x6
- * MPLL_SDIV[0] 0x1
- */
- ldr r1, =0x80C80601
- ldr r2, =0x014108 @MPLL_CON0_OFFSET
- str r1, [r0, r2]
-
- /* EPLL */
- ldr r1, =0x0
- ldr r2, =0x0C114 @EPLL_CON1_OFFSET
- str r1, [r0, r2]
-
- /*
- * EPLL_CON0:
- *
- * EPLL_MDIV[16] 0x30
- * EPLL_PDIV[8] 0x3
- * EPLL_SDIV[0] 0x2
- */
- ldr r1, =0x80300302
- ldr r2, =0x0C110 @EPLL_CON0_OFFSET
- str r1, [r0, r2]
-
- /*
- * VPLL_CON1:
- *
- * VPLL_MRR[24] 0x11
- * VPLL_MFR[16] 0x0
- * VPLL_K[0] 0x400
- */
- ldr r1, =0x11000400
- ldr r2, =0x0C124 @VPLL_CON1_OFFSET
- str r1, [r0, r2]
-
- /*
- * VPLL_CON0:
- *
- * VPLL_MDIV[16] 0x35
- * VPLL_PDIV[8] 0x3
- * VPLL_SDIV[0] 0x2
- */
- ldr r1, =0x80350302
- ldr r2, =0x0C120 @VPLL_CON0_OFFSET
- str r1, [r0, r2]
-
- /* wait ?us */
- mov r1, #0x30000
-3: subs r1, r1, #1
- bne 3b
-
- pop {pc}
-/*
- * uart_asm_init: Initialize UART in asm mode, 115200bps fixed.
- * void uart_asm_init(void)
- */
- .globl uart_asm_init
-uart_asm_init:
-
- /* setup UART0-UART3 GPIOs (part1) */
- mov r0, r7
- ldr r1, =0x22222222
- str r1, [r0, #0x00] @ EXYNOS4_GPIO_A0_OFFSET
- ldr r1, =0x00222222
- str r1, [r0, #0x20] @ EXYNOS4_GPIO_A1_OFFSET
-
- ldr r0, =EXYNOS4_UART_BASE
- add r0, r0, #EXYNOS4_DEFAULT_UART_OFFSET
-
- ldr r1, =0x3C5
- str r1, [r0, #0x4]
- ldr r1, =0x111
- str r1, [r0, #0x8]
- ldr r1, =0x3
- str r1, [r0, #0x0]
- ldr r1, =0x35
- str r1, [r0, #0x28]
- ldr r1, =0x4
- str r1, [r0, #0x2c]
-
- mov pc, lr
- nop
- nop
- nop
-
-/* Setting TZPC[TrustZone Protection Controller] */
-tzpc_init:
- ldr r0, =0x10110000
- mov r1, #0x0
- str r1, [r0]
- mov r1, #0xff
- str r1, [r0, #0x0804]
- str r1, [r0, #0x0810]
- str r1, [r0, #0x081C]
- str r1, [r0, #0x0828]
-
- ldr r0, =0x10120000
- mov r1, #0x0
- str r1, [r0]
- mov r1, #0xff
- str r1, [r0, #0x0804]
- str r1, [r0, #0x0810]
- str r1, [r0, #0x081C]
- str r1, [r0, #0x0828]
-
- ldr r0, =0x10130000
- mov r1, #0x0
- str r1, [r0]
- mov r1, #0xff
- str r1, [r0, #0x0804]
- str r1, [r0, #0x0810]
- str r1, [r0, #0x081C]
- str r1, [r0, #0x0828]
-
- ldr r0, =0x10140000
- mov r1, #0x0
- str r1, [r0]
- mov r1, #0xff
- str r1, [r0, #0x0804]
- str r1, [r0, #0x0810]
- str r1, [r0, #0x081C]
- str r1, [r0, #0x0828]
-
- ldr r0, =0x10150000
- mov r1, #0x0
- str r1, [r0]
- mov r1, #0xff
- str r1, [r0, #0x0804]
- str r1, [r0, #0x0810]
- str r1, [r0, #0x081C]
- str r1, [r0, #0x0828]
-
- ldr r0, =0x10160000
- mov r1, #0x0
- str r1, [r0]
- mov r1, #0xff
- str r1, [r0, #0x0804]
- str r1, [r0, #0x0810]
- str r1, [r0, #0x081C]
- str r1, [r0, #0x0828]
-
- mov pc, lr
diff --git a/board/samsung/smdkv310/mem_setup.S b/board/samsung/smdkv310/mem_setup.S
deleted file mode 100644
index d3b6265..0000000
--- a/board/samsung/smdkv310/mem_setup.S
+++ /dev/null
@@ -1,365 +0,0 @@
-/*
- * Memory setup for SMDKV310 board based on EXYNOS4210
- *
- * Copyright (C) 2011 Samsung Electronics
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-
-#define SET_MIU
-
-#define MEM_DLL
-
-#ifdef CONFIG_CLK_800_330_165
-#define DRAM_CLK_330
-#endif
-#ifdef CONFIG_CLK_1000_200_200
-#define DRAM_CLK_200
-#endif
-#ifdef CONFIG_CLK_1000_330_165
-#define DRAM_CLK_330
-#endif
-#ifdef CONFIG_CLK_1000_400_200
-#define DRAM_CLK_400
-#endif
-
- .globl mem_ctrl_asm_init
-mem_ctrl_asm_init:
-
- /*
- * Async bridge configuration at CPU_core:
- * 1: half_sync
- * 0: full_sync
- */
- ldr r0, =0x10010350
- mov r1, #1
- str r1, [r0]
-
-#ifdef SET_MIU
- ldr r0, =EXYNOS4_MIU_BASE @0x10600000
-#ifdef CONFIG_MIU_1BIT_INTERLEAVED
- ldr r1, =0x0000000c
- str r1, [r0, #0x400] @MIU_INTLV_CONFIG
- ldr r1, =0x40000000
- str r1, [r0, #0x808] @MIU_INTLV_START_ADDR
- ldr r1, =0xbfffffff
- str r1, [r0, #0x810] @MIU_INTLV_END_ADDR
- ldr r1, =0x00000001
- str r1, [r0, #0x800] @MIU_MAPPING_UPDATE
-#endif
-#ifdef CONFIG_MIU_2BIT_INTERLEAVED
- ldr r1, =0x2000150c
- str r1, [r0, #0x400] @MIU_INTLV_CONFIG
- ldr r1, =0x40000000
- str r1, [r0, #0x808] @MIU_INTLV_START_ADDR
- ldr r1, =0xbfffffff
- str r1, [r0, #0x810] @MIU_INTLV_END_ADDR
- ldr r1, =0x00000001
- str r1, [r0, #0x800] @MIU_MAPPING_UPDATE
-#endif
-#ifdef CONFIG_MIU_LINEAR
- ldr r1, =0x40000000
- str r1, [r0, #0x818] @MIU_SINGLE_MAPPING0_START_ADDR
- ldr r1, =0x7fffffff
- str r1, [r0, #0x820] @MIU_SINGLE_MAPPING0_END_ADDR
- ldr r1, =0x80000000
- str r1, [r0, #0x828] @MIU_SINGLE_MAPPING1_START_ADDR
- ldr r1, =0xbfffffff
- str r1, [r0, #0x830] @MIU_SINGLE_MAPPING1_END_ADDR]
- ldr r1, =0x00000006
- str r1, [r0, #0x800] @MIU_MAPPING_UPDATE
-#endif
-#endif
- /* DREX0 */
- ldr r0, =EXYNOS4_DMC0_BASE @0x10400000
-
- ldr r1, =0xe0000086
- str r1, [r0, #0x1C] @DMC_PHYCONTROL1
-
- ldr r1, =0xE3855703
- str r1, [r0, #0x44] @DMC_PHYZQCONTROL
-
- mov r2, #0x100000
-1: subs r2, r2, #1
- bne 1b
-
- ldr r1, =0xe000008e
- str r1, [r0, #0x1C] @DMC_PHYCONTROL1
- ldr r1, =0xe0000086
- str r1, [r0, #0x1C] @DMC_PHYCONTROL1
-
- ldr r1, =0x71101008
- str r1, [r0, #0x18] @DMC_PHYCONTROL0
- ldr r1, =0x7110100A
- str r1, [r0, #0x18] @DMC_PHYCONTROL0
- ldr r1, =0xe0000086
- str r1, [r0, #0x1C] @DMC_PHYCONTROL1
- ldr r1, =0x7110100B
- str r1, [r0, #0x18] @DMC_PHYCONTROL0
-
- ldr r1, =0x00000000
- str r1, [r0, #0x20] @DMC_PHYCONTROL2
-
- ldr r1, =0x0FFF301a
- str r1, [r0, #0x00] @DMC_CONCONTROL
- ldr r1, =0x00312640
- str r1, [r0, #0x04] @DMC_MEMCONTROL]
-
-#ifdef CONFIG_MIU_LINEAR
- ldr r1, =0x40e01323
- str r1, [r0, #0x08] @DMC_MEMCONFIG0
- ldr r1, =0x60e01323
- str r1, [r0, #0x0C] @DMC_MEMCONFIG1
-#else /* @MIU_1BIT_INTERLEAVED | MIU_2BIT_INTERLEAVED */
- ldr r1, =0x20e01323
- str r1, [r0, #0x08] @DMC_MEMCONFIG0
- ldr r1, =0x40e01323
- str r1, [r0, #0x0C] @DMC_MEMCONFIG1
-#endif
-
- ldr r1, =0xff000000
- str r1, [r0, #0x14] @DMC_PRECHCONFIG
-
- ldr r1, =0x000000BC
- str r1, [r0, #0x30] @DMC_TIMINGAREF
-
-#ifdef DRAM_CLK_330
- ldr r1, =0x3545548d
- str r1, [r0, #0x34] @DMC_TIMINGROW
- ldr r1, =0x45430506
- str r1, [r0, #0x38] @DMC_TIMINGDATA
- ldr r1, =0x4439033c
- str r1, [r0, #0x3C] @DMC_TIMINGPOWER
-#endif
-#ifdef DRAM_CLK_400
- ldr r1, =0x4046654f
- str r1, [r0, #0x34] @DMC_TIMINGROW
- ldr r1, =0x56500506
- str r1, [r0, #0x38] @DMC_TIMINGDATA
- ldr r1, =0x5444033d
- str r1, [r0, #0x3C] @DMC_TIMINGPOWER
-#endif
- ldr r1, =0x07000000
- str r1, [r0, #0x10] @DMC_DIRECTCMD
-
- mov r2, #0x100000
-2: subs r2, r2, #1
- bne 2b
-
- ldr r1, =0x00020000
- str r1, [r0, #0x10] @DMC_DIRECTCMD
- ldr r1, =0x00030000
- str r1, [r0, #0x10] @DMC_DIRECTCMD
- ldr r1, =0x00010002
- str r1, [r0, #0x10] @DMC_DIRECTCMD
- ldr r1, =0x00000328
- str r1, [r0, #0x10] @DMC_DIRECTCMD
-
- mov r2, #0x100000
-3: subs r2, r2, #1
- bne 3b
-
- ldr r1, =0x0a000000
- str r1, [r0, #0x10] @DMC_DIRECTCMD
-
- mov r2, #0x100000
-4: subs r2, r2, #1
- bne 4b
-
- ldr r1, =0x07100000
- str r1, [r0, #0x10] @DMC_DIRECTCMD
-
- mov r2, #0x100000
-5: subs r2, r2, #1
- bne 5b
-
- ldr r1, =0x00120000
- str r1, [r0, #0x10] @DMC_DIRECTCMD
- ldr r1, =0x00130000
- str r1, [r0, #0x10] @DMC_DIRECTCMD
- ldr r1, =0x00110002
- str r1, [r0, #0x10] @DMC_DIRECTCMD
- ldr r1, =0x00100328
- str r1, [r0, #0x10] @DMC_DIRECTCMD
-
- mov r2, #0x100000
-6: subs r2, r2, #1
- bne 6b
-
- ldr r1, =0x0a100000
- str r1, [r0, #0x10] @DMC_DIRECTCMD
-
- mov r2, #0x100000
-7: subs r2, r2, #1
- bne 7b
-
- ldr r1, =0xe000008e
- str r1, [r0, #0x1C] @DMC_PHYCONTROL1
- ldr r1, =0xe0000086
- str r1, [r0, #0x1C] @DMC_PHYCONTROL1
-
- mov r2, #0x100000
-8: subs r2, r2, #1
- bne 8b
-
- /* DREX1 */
- ldr r0, =EXYNOS4_DMC1_BASE @0x10410000
-
- ldr r1, =0xe0000086
- str r1, [r0, #0x1C] @DMC_PHYCONTROL1
-
- ldr r1, =0xE3855703
- str r1, [r0, #0x44] @DMC_PHYZQCONTROL
-
- mov r2, #0x100000
-1: subs r2, r2, #1
- bne 1b
-
- ldr r1, =0xe000008e
- str r1, [r0, #0x1C] @DMC_PHYCONTROL1
- ldr r1, =0xe0000086
- str r1, [r0, #0x1C] @DMC_PHYCONTROL1
-
- ldr r1, =0x71101008
- str r1, [r0, #0x18] @DMC_PHYCONTROL0
- ldr r1, =0x7110100A
- str r1, [r0, #0x18] @DMC_PHYCONTROL0
- ldr r1, =0xe0000086
- str r1, [r0, #0x1C] @DMC_PHYCONTROL1
- ldr r1, =0x7110100B
- str r1, [r0, #0x18] @DMC_PHYCONTROL0
-
- ldr r1, =0x00000000
- str r1, [r0, #0x20] @DMC_PHYCONTROL2
-
- ldr r1, =0x0FFF301a
- str r1, [r0, #0x00] @DMC_CONCONTROL
- ldr r1, =0x00312640
- str r1, [r0, #0x04] @DMC_MEMCONTROL]
-
-#ifdef CONFIG_MIU_LINEAR
- ldr r1, =0x40e01323
- str r1, [r0, #0x08] @DMC_MEMCONFIG0
- ldr r1, =0x60e01323
- str r1, [r0, #0x0C] @DMC_MEMCONFIG1
-#else /* @MIU_1BIT_INTERLEAVED | MIU_2BIT_INTERLEAVED */
- ldr r1, =0x20e01323
- str r1, [r0, #0x08] @DMC_MEMCONFIG0
- ldr r1, =0x40e01323
- str r1, [r0, #0x0C] @DMC_MEMCONFIG1
-#endif
-
- ldr r1, =0xff000000
- str r1, [r0, #0x14] @DMC_PRECHCONFIG
-
- ldr r1, =0x000000BC
- str r1, [r0, #0x30] @DMC_TIMINGAREF
-
-#ifdef DRAM_CLK_330
- ldr r1, =0x3545548d
- str r1, [r0, #0x34] @DMC_TIMINGROW
- ldr r1, =0x45430506
- str r1, [r0, #0x38] @DMC_TIMINGDATA
- ldr r1, =0x4439033c
- str r1, [r0, #0x3C] @DMC_TIMINGPOWER
-#endif
-#ifdef DRAM_CLK_400
- ldr r1, =0x4046654f
- str r1, [r0, #0x34] @DMC_TIMINGROW
- ldr r1, =0x56500506
- str r1, [r0, #0x38] @DMC_TIMINGDATA
- ldr r1, =0x5444033d
- str r1, [r0, #0x3C] @DMC_TIMINGPOWER
-#endif
-
- ldr r1, =0x07000000
- str r1, [r0, #0x10] @DMC_DIRECTCMD
-
- mov r2, #0x100000
-2: subs r2, r2, #1
- bne 2b
-
- ldr r1, =0x00020000
- str r1, [r0, #0x10] @DMC_DIRECTCMD
- ldr r1, =0x00030000
- str r1, [r0, #0x10] @DMC_DIRECTCMD
- ldr r1, =0x00010002
- str r1, [r0, #0x10] @DMC_DIRECTCMD
- ldr r1, =0x00000328
- str r1, [r0, #0x10] @DMC_DIRECTCMD
-
- mov r2, #0x100000
-3: subs r2, r2, #1
- bne 3b
-
- ldr r1, =0x0a000000
- str r1, [r0, #0x10] @DMC_DIRECTCMD
-
- mov r2, #0x100000
-4: subs r2, r2, #1
- bne 4b
-
- ldr r1, =0x07100000
- str r1, [r0, #0x10] @DMC_DIRECTCMD
-
- mov r2, #0x100000
-5: subs r2, r2, #1
- bne 5b
-
- ldr r1, =0x00120000
- str r1, [r0, #0x10] @DMC_DIRECTCMD
- ldr r1, =0x00130000
- str r1, [r0, #0x10] @DMC_DIRECTCMD
- ldr r1, =0x00110002
- str r1, [r0, #0x10] @DMC_DIRECTCMD
- ldr r1, =0x00100328
- str r1, [r0, #0x10] @DMC_DIRECTCMD
-
- mov r2, #0x100000
-6: subs r2, r2, #1
- bne 6b
-
- ldr r1, =0x0a100000
- str r1, [r0, #0x10] @DMC_DIRECTCMD
-
- mov r2, #0x100000
-7: subs r2, r2, #1
- bne 7b
-
- ldr r1, =0xe000008e
- str r1, [r0, #0x1C] @DMC_PHYCONTROL1
- ldr r1, =0xe0000086
- str r1, [r0, #0x1C] @DMC_PHYCONTROL1
-
- mov r2, #0x100000
-8: subs r2, r2, #1
- bne 8b
-
- /* turn on DREX0, DREX1 */
- ldr r0, =0x10400000 @APB_DMC_0_BASE
- ldr r1, =0x0FFF303a
- str r1, [r0, #0x00] @DMC_CONCONTROL
-
- ldr r0, =0x10410000 @APB_DMC_1_BASE
- ldr r1, =0x0FFF303a
- str r1, [r0, #0x00] @DMC_CONCONTROL
-
- mov pc, lr
diff --git a/board/samsung/smdkv310/mmc_boot.c b/board/samsung/smdkv310/mmc_boot.c
deleted file mode 100644
index d3fc18d..0000000
--- a/board/samsung/smdkv310/mmc_boot.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include<common.h>
-#include<config.h>
-
-/*
-* Copy U-boot from mmc to RAM:
-* COPY_BL2_FNPTR_ADDR: Address in iRAM, which Contains
-* API (Data transfer from mmc to ram)
-*/
-void copy_uboot_to_ram(void)
-{
- u32 (*copy_bl2)(u32, u32, u32) = (void *)COPY_BL2_FNPTR_ADDR;
-
- copy_bl2(BL2_START_OFFSET, BL2_SIZE_BLOC_COUNT, CONFIG_SYS_TEXT_BASE);
-}
-
-void board_init_f(unsigned long bootflag)
-{
- __attribute__((noreturn)) void (*uboot)(void);
- copy_uboot_to_ram();
-
- /* Jump to U-Boot image */
- uboot = (void *)CONFIG_SYS_TEXT_BASE;
- (*uboot)();
- /* Never returns Here */
-}
-
-/* Place Holders */
-void board_init_r(gd_t *id, ulong dest_addr)
-{
- /*Function attribute is no-return*/
- /*This Function never executes*/
- while (1)
- ;
-}
-
-void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3)
-{
-}
diff --git a/board/samsung/smdkv310/smdkv310.c b/board/samsung/smdkv310/smdkv310.c
index 81ac8f6..015b920 100644
--- a/board/samsung/smdkv310/smdkv310.c
+++ b/board/samsung/smdkv310/smdkv310.c
@@ -26,6 +26,8 @@
#include <asm/arch/cpu.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mmc.h>
+#include <asm/arch/periph.h>
+#include <asm/arch/pinmux.h>
#include <asm/arch/sromc.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -137,3 +139,47 @@
return err;
}
#endif
+
+static int board_uart_init(void)
+{
+ int err;
+
+ err = exynos_pinmux_config(PERIPH_ID_UART0, PINMUX_FLAG_NONE);
+ if (err) {
+ debug("UART0 not configured\n");
+ return err;
+ }
+
+ err = exynos_pinmux_config(PERIPH_ID_UART1, PINMUX_FLAG_NONE);
+ if (err) {
+ debug("UART1 not configured\n");
+ return err;
+ }
+
+ err = exynos_pinmux_config(PERIPH_ID_UART2, PINMUX_FLAG_NONE);
+ if (err) {
+ debug("UART2 not configured\n");
+ return err;
+ }
+
+ err = exynos_pinmux_config(PERIPH_ID_UART3, PINMUX_FLAG_NONE);
+ if (err) {
+ debug("UART3 not configured\n");
+ return err;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+int board_early_init_f(void)
+{
+ int err;
+ err = board_uart_init();
+ if (err) {
+ debug("UART init failed\n");
+ return err;
+ }
+ return err;
+}
+#endif
diff --git a/board/sorcery/Makefile b/board/sorcery/Makefile
deleted file mode 100644
index e1752e3..0000000
--- a/board/sorcery/Makefile
+++ /dev/null
@@ -1,44 +0,0 @@
-#
-# (C) Copyright 2005-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := $(BOARD).o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(OBJS)
- $(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/sorcery/sorcery.c b/board/sorcery/sorcery.c
deleted file mode 100644
index 90d4298..0000000
--- a/board/sorcery/sorcery.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * (C) Copyright 2004, Freescale Inc.
- * TsiChung Liew, Tsi-Chung.Liew@freescale.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8220.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-#include <pci.h>
-#include <netdev.h>
-
-phys_size_t initdram (int board_type)
-{
- ulong size;
-
- size = dramSetup ();
-
- return get_ram_size(CONFIG_SYS_SDRAM_BASE, size);
-}
-
-int checkboard (void)
-{
- puts ("Board: Sorcery-C MPC8220\n");
-
- return 0;
-}
-
-#if defined(CONFIG_PCI)
-/*
- * Initialize PCI devices, report devices found.
- */
-static struct pci_controller hose;
-
-#endif /* CONFIG_PCI */
-
-void pci_init_board (void)
-{
-#ifdef CONFIG_PCI
- extern void pci_mpc8220_init (struct pci_controller *hose);
- pci_mpc8220_init (&hose);
-#endif /* CONFIG_PCI */
-}
-
-int board_eth_init(bd_t *bis)
-{
- /* Initialize built-in FEC first */
- cpu_eth_init(bis);
- return pci_eth_init(bis);
-}
diff --git a/board/teejet/mt_ventoux/mt_ventoux.c b/board/teejet/mt_ventoux/mt_ventoux.c
index 8347cf9..5c73098 100644
--- a/board/teejet/mt_ventoux/mt_ventoux.c
+++ b/board/teejet/mt_ventoux/mt_ventoux.c
@@ -31,7 +31,7 @@
#include <asm/omap_gpio.h>
#include <asm/arch/mmc_host_def.h>
#include <asm/arch/dss.h>
-#include <asm/arch/clocks.h>
+#include <asm/arch/clock.h>
#include <i2c.h>
#include <spartan3.h>
#include <asm/gpio.h>
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index b371376..fb98df0 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -38,9 +38,6 @@
DECLARE_GLOBAL_DATA_PTR;
static struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE;
-#ifdef CONFIG_SPL_BUILD
-static struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE;
-#endif
/* MII mode defines */
#define MII_MODE_ENABLE 0x0
@@ -126,28 +123,7 @@
return 0;
}
-/* UART Defines */
#ifdef CONFIG_SPL_BUILD
-#define UART_RESET (0x1 << 1)
-#define UART_CLK_RUNNING_MASK 0x1
-#define UART_SMART_IDLE_EN (0x1 << 0x3)
-
-static void rtc32k_enable(void)
-{
- struct rtc_regs *rtc = (struct rtc_regs *)RTC_BASE;
-
- /*
- * Unlock the RTC's registers. For more details please see the
- * RTC_SS section of the TRM. In order to unlock we need to
- * write these specific values (keys) in this order.
- */
- writel(0x83e70b13, &rtc->kick0r);
- writel(0x95a4f1e0, &rtc->kick1r);
-
- /* Enable the RTC 32K OSC by setting bits 3 and 6. */
- writel((1 << 3) | (1 << 6), &rtc->osc);
-}
-
static const struct ddr_data ddr2_data = {
.datardsratio0 = ((MT47H128M16RT25E_RD_DQS<<30) |
(MT47H128M16RT25E_RD_DQS<<20) |
@@ -304,6 +280,15 @@
*/
void s_init(void)
{
+ /*
+ * Save the boot parameters passed from romcode.
+ * We cannot delay the saving further than this,
+ * to prevent overwrites.
+ */
+#ifdef CONFIG_SPL_BUILD
+ save_omap_boot_params();
+#endif
+
/* WDT1 is already running when the bootloader gets control
* Disable it to avoid "random" resets
*/
@@ -321,9 +306,6 @@
/* Enable RTC32K clock */
rtc32k_enable();
- /* UART softreset */
- u32 regVal;
-
#ifdef CONFIG_SERIAL1
enable_uart0_pin_mux();
#endif /* CONFIG_SERIAL1 */
@@ -343,17 +325,7 @@
enable_uart5_pin_mux();
#endif /* CONFIG_SERIAL6 */
- regVal = readl(&uart_base->uartsyscfg);
- regVal |= UART_RESET;
- writel(regVal, &uart_base->uartsyscfg);
- while ((readl(&uart_base->uartsyssts) &
- UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK)
- ;
-
- /* Disable smart idle */
- regVal = readl(&uart_base->uartsyscfg);
- regVal |= UART_SMART_IDLE_EN;
- writel(regVal, &uart_base->uartsyscfg);
+ uart_soft_reset();
gd = &gdata;
@@ -496,6 +468,7 @@
eth_setenv_enetaddr("ethaddr", mac_addr);
}
+#ifdef CONFIG_DRIVER_TI_CPSW
if (board_is_bone() || board_is_bone_lt() || board_is_idk()) {
writel(MII_MODE_ENABLE, &cdev->miisel);
cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if =
@@ -511,6 +484,7 @@
printf("Error %d registering CPSW switch\n", rv);
else
n += rv;
+#endif
/*
*
diff --git a/board/ti/dra7xx/mux_data.h b/board/ti/dra7xx/mux_data.h
index 04c95fd..338a241 100644
--- a/board/ti/dra7xx/mux_data.h
+++ b/board/ti/dra7xx/mux_data.h
@@ -29,19 +29,29 @@
#include <asm/arch/mux_dra7xx.h>
const struct pad_conf_entry core_padconf_array_essential[] = {
- {MMC1_CLK, (PTU | IEN | M0)}, /* MMC1_CLK */
- {MMC1_CMD, (PTU | IEN | M0)}, /* MMC1_CMD */
- {MMC1_DAT0, (PTU | IEN | M0)}, /* MMC1_DAT0 */
- {MMC1_DAT1, (PTU | IEN | M0)}, /* MMC1_DAT1 */
- {MMC1_DAT2, (PTU | IEN | M0)}, /* MMC1_DAT2 */
- {MMC1_DAT3, (PTU | IEN | M0)}, /* MMC1_DAT3 */
- {MMC1_SDCD, (PTU | IEN | M0)}, /* MMC1_SDCD */
- {MMC1_SDWP, (PTU | IEN | M0)}, /* MMC1_SDWP */
- {UART1_RXD, (PTU | IEN | M0)}, /* UART1_RXD */
- {UART1_TXD, (M0)}, /* UART1_TXD */
- {UART1_CTSN, (PTU | IEN | M0)}, /* UART1_CTSN */
- {UART1_RTSN, (M0)}, /* UART1_RTSN */
- {I2C1_SDA, (PTU | IEN | M0)}, /* I2C1_SDA */
- {I2C1_SCL, (PTU | IEN | M0)}, /* I2C1_SCL */
+ {MMC1_CLK, (IEN | PTU | PDIS | M0)}, /* MMC1_CLK */
+ {MMC1_CMD, (IEN | PTU | PDIS | M0)}, /* MMC1_CMD */
+ {MMC1_DAT0, (IEN | PTU | PDIS | M0)}, /* MMC1_DAT0 */
+ {MMC1_DAT1, (IEN | PTU | PDIS | M0)}, /* MMC1_DAT1 */
+ {MMC1_DAT2, (IEN | PTU | PDIS | M0)}, /* MMC1_DAT2 */
+ {MMC1_DAT3, (IEN | PTU | PDIS | M0)}, /* MMC1_DAT3 */
+ {MMC1_SDCD, (FSC | IEN | PTU | PDIS | M0)}, /* MMC1_SDCD */
+ {MMC1_SDWP, (FSC | IEN | PTD | PEN | M14)}, /* MMC1_SDWP */
+ {GPMC_A19, (IEN | PTU | PDIS | M1)}, /* mmc2_dat4 */
+ {GPMC_A20, (IEN | PTU | PDIS | M1)}, /* mmc2_dat5 */
+ {GPMC_A21, (IEN | PTU | PDIS | M1)}, /* mmc2_dat6 */
+ {GPMC_A22, (IEN | PTU | PDIS | M1)}, /* mmc2_dat7 */
+ {GPMC_A23, (IEN | PTU | PDIS | M1)}, /* mmc2_clk */
+ {GPMC_A24, (IEN | PTU | PDIS | M1)}, /* mmc2_dat0 */
+ {GPMC_A25, (IEN | PTU | PDIS | M1)}, /* mmc2_dat1 */
+ {GPMC_A26, (IEN | PTU | PDIS | M1)}, /* mmc2_dat2 */
+ {GPMC_A27, (IEN | PTU | PDIS | M1)}, /* mmc2_dat3 */
+ {GPMC_CS1, (IEN | PTU | PDIS | M1)}, /* mmm2_cmd */
+ {UART1_RXD, (FSC | IEN | PTU | PDIS | M0)}, /* UART1_RXD */
+ {UART1_TXD, (FSC | IEN | PTU | PDIS | M0)}, /* UART1_TXD */
+ {UART1_CTSN, (IEN | PTU | PDIS | M3)}, /* UART1_CTSN */
+ {UART1_RTSN, (IEN | PTU | PDIS | M3)}, /* UART1_RTSN */
+ {I2C1_SDA, (IEN | PTU | PDIS | M0)}, /* I2C1_SDA */
+ {I2C1_SCL, (IEN | PTU | PDIS | M0)}, /* I2C1_SCL */
};
#endif /* _MUX_DATA_DRA7XX_H_ */
diff --git a/board/ti/omap2420h4/config.mk b/board/ti/omap2420h4/config.mk
deleted file mode 100644
index e5dff69..0000000
--- a/board/ti/omap2420h4/config.mk
+++ /dev/null
@@ -1,28 +0,0 @@
-#
-# (C) Copyright 2004
-# Texas Instruments, <www.ti.com>
-#
-# TI H4 board with OMAP2420 (ARM1136) cpu
-# see http://www.ti.com/ for more information on Texas Instruments
-#
-# H4 has 1 bank of 32MB or 64MB mDDR-SDRAM on CS0
-# H4 has 1 bank of 32MB or 00MB mDDR-SDRAM on CS1
-# Physical Address:
-# 8000'0000 (bank0)
-# A000/0000 (bank1) ES2 will be configurable
-# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
-# (mem base + reserved)
-
-# For use with external or internal boots.
-#CONFIG_SYS_TEXT_BASE = 0x80e80000
-
-# Used with full SRAM boot.
-# This is either with a GP system or a signed boot image.
-# easiest, and safest way to go if you can.
-#CONFIG_SYS_TEXT_BASE = 0x40270000
-
-
-# Handy to get symbols to debug ROM version.
-#CONFIG_SYS_TEXT_BASE = 0x0
-CONFIG_SYS_TEXT_BASE = 0x08000000
-#CONFIG_SYS_TEXT_BASE = 0x04000000
diff --git a/board/ti/omap2420h4/lowlevel_init.S b/board/ti/omap2420h4/lowlevel_init.S
deleted file mode 100644
index 731c552..0000000
--- a/board/ti/omap2420h4/lowlevel_init.S
+++ /dev/null
@@ -1,185 +0,0 @@
-/*
- * Board specific setup info
- *
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-#include <asm/arch/omap2420.h>
-#include <asm/arch/mem.h>
-#include <asm/arch/clocks.h>
-
-_TEXT_BASE:
- .word CONFIG_SYS_TEXT_BASE /* sdram load addr from config.mk */
-
-/**************************************************************************
- * cpy_clk_code: relocates clock code into SRAM where its safer to execute
- * R1 = SRAM destination address.
- *************************************************************************/
-.global cpy_clk_code
- cpy_clk_code:
- /* Copy DPLL code into SRAM */
- adr r0, go_to_speed /* get addr of clock setting code */
- mov r2, #384 /* r2 size to copy (div by 32 bytes) */
- mov r1, r1 /* r1 <- dest address (passed in) */
- add r2, r2, r0 /* r2 <- source end address */
-next2:
- ldmia r0!, {r3-r10} /* copy from source address [r0] */
- stmia r1!, {r3-r10} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- bne next2
- mov pc, lr /* back to caller */
-
-/* ****************************************************************************
- * go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed
- * -executed from SRAM.
- * R0 = PRCM_CLKCFG_CTRL - addr of valid reg
- * R1 = CM_CLKEN_PLL - addr dpll ctlr reg
- * R2 = dpll value
- * R3 = CM_IDLEST_CKGEN - addr dpll lock wait
- ******************************************************************************/
-.global go_to_speed
- go_to_speed:
- sub sp, sp, #0x4 /* get some stack space */
- str r4, [sp] /* save r4's value */
-
- /* move into fast relock bypass */
- ldr r8, pll_ctl_add
- mov r4, #0x2
- str r4, [r8]
- ldr r4, pll_stat
-block:
- ldr r8, [r4] /* wait for bypass to take effect */
- and r8, r8, #0x3
- cmp r8, #0x1
- bne block
-
- /* set new dpll dividers _after_ in bypass */
- ldr r4, pll_div_add
- ldr r8, pll_div_val
- str r8, [r4]
-
- /* now prepare GPMC (flash) for new dpll speed */
- /* flash needs to be stable when we jump back to it */
- ldr r4, cfg3_0_addr
- ldr r8, cfg3_0_val
- str r8, [r4]
- ldr r4, cfg4_0_addr
- ldr r8, cfg4_0_val
- str r8, [r4]
- ldr r4, cfg1_0_addr
- ldr r8, [r4]
- orr r8, r8, #0x3 /* up gpmc divider */
- str r8, [r4]
-
- /* setup to 2x loop though code. The first loop pre-loads the
- * icache, the 2nd commits the prcm config, and locks the dpll
- */
- mov r4, #0x1000 /* spin spin spin */
- mov r8, #0x4 /* first pass condition & set registers */
- cmp r8, #0x4
-2:
- ldrne r8, [r3] /* DPLL lock check */
- and r8, r8, #0x7
- cmp r8, #0x2
- beq 4f
-3:
- subeq r8, r8, #0x1
- streq r8, [r0] /* commit dividers (2nd time) */
- nop
-lloop1:
- sub r4, r4, #0x1 /* Loop currently necessary else bad jumps */
- nop
- cmp r4, #0x0
- bne lloop1
- mov r4, #0x40000
- cmp r8, #0x1
- nop
- streq r2, [r1] /* lock dpll (2nd time) */
- nop
-lloop2:
- sub r4, r4, #0x1 /* loop currently necessary else bad jumps */
- nop
- cmp r4, #0x0
- bne lloop2
- mov r4, #0x40000
- cmp r8, #0x1
- nop
- ldreq r8, [r3] /* get lock condition for dpll */
- cmp r8, #0x4 /* first time though? */
- bne 2b
- moveq r8, #0x2 /* set to dpll check condition. */
- beq 3b /* if condition not true branch */
-4:
- ldr r4, [sp]
- add sp, sp, #0x4 /* return stack space */
- mov pc, lr /* back to caller, locked */
-
-_go_to_speed: .word go_to_speed
-
-/* these constants need to be close for PIC code */
-cfg3_0_addr:
- .word GPMC_CONFIG3_0
-cfg3_0_val:
- .word H4_24XX_GPMC_CONFIG3_0
-cfg4_0_addr:
- .word GPMC_CONFIG4_0
-cfg4_0_val:
- .word H4_24XX_GPMC_CONFIG4_0
-cfg1_0_addr:
- .word GPMC_CONFIG1_0
-pll_ctl_add:
- .word CM_CLKEN_PLL
-pll_stat:
- .word CM_IDLEST_CKGEN
-pll_div_add:
- .word CM_CLKSEL1_PLL
-pll_div_val:
- .word DPLL_VAL /* DPLL setting (300MHz default) */
-
-.globl lowlevel_init
-lowlevel_init:
- ldr sp, SRAM_STACK
- str ip, [sp] /* stash old link register */
- mov ip, lr /* save link reg across call */
- bl s_init /* go setup pll,mux,memory */
- ldr ip, [sp] /* restore save ip */
- mov lr, ip /* restore link reg */
-
- /* map interrupt controller */
- ldr r0, VAL_INTH_SETUP
- mcr p15, 0, r0, c15, c2, 4
-
- /* back to arch calling code */
- mov pc, lr
-
- /* the literal pools origin */
- .ltorg
-
-REG_CONTROL_STATUS:
- .word CONTROL_STATUS
-VAL_INTH_SETUP:
- .word PERIFERAL_PORT_BASE
-SRAM_STACK:
- .word LOW_LEVEL_SRAM_STACK
diff --git a/board/ti/omap2420h4/mem.c b/board/ti/omap2420h4/mem.c
deleted file mode 100644
index ba3f12a..0000000
--- a/board/ti/omap2420h4/mem.c
+++ /dev/null
@@ -1,362 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/omap2420.h>
-#include <asm/io.h>
-#include <asm/arch/bits.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/mem.h>
-#include <asm/arch/clocks.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/sys_info.h>
-
-/************************************************************
- * sdelay() - simple spin loop. Will be constant time as
- * its generally used in 12MHz bypass conditions only. This
- * is necessary until timers are accessible.
- *
- * not inline to increase chances its in cache when called
- *************************************************************/
-void sdelay (unsigned long loops)
-{
- __asm__ volatile ("1:\n" "subs %0, %1, #1\n"
- "bne 1b":"=r" (loops):"0" (loops));
-}
-
-/*********************************************************************************
- * prcm_init() - inits clocks for PRCM as defined in clocks.h (config II default).
- * -- called from SRAM, or Flash (using temp SRAM stack).
- *********************************************************************************/
-void prcm_init(void)
-{
- u32 div;
- void (*f_lock_pll) (u32, u32, u32, u32);
- extern void *_end_vect, *_start;
-
- f_lock_pll = (void *)((u32)&_end_vect - (u32)&_start + SRAM_VECT_CODE);
-
- __raw_writel(0, CM_FCLKEN1_CORE); /* stop all clocks to reduce ringing */
- __raw_writel(0, CM_FCLKEN2_CORE); /* may not be necessary */
- __raw_writel(0, CM_ICLKEN1_CORE);
- __raw_writel(0, CM_ICLKEN2_CORE);
-
- __raw_writel(DPLL_OUT, CM_CLKSEL2_PLL); /* set DPLL out */
- __raw_writel(MPU_DIV, CM_CLKSEL_MPU); /* set MPU divider */
- __raw_writel(DSP_DIV, CM_CLKSEL_DSP); /* set dsp and iva dividers */
- __raw_writel(GFX_DIV, CM_CLKSEL_GFX); /* set gfx dividers */
-
- div = BUS_DIV;
- __raw_writel(div, CM_CLKSEL1_CORE);/* set L3/L4/USB/Display/Vlnc/SSi dividers */
- sdelay(1000);
-
- if(running_in_sram()){
- /* If running fully from SRAM this is OK. The Flash bus drops out for just a little.
- * but then comes back. If running from Flash this sequence kills you, thus you need
- * to run it using CONFIG_PARTIAL_SRAM.
- */
- __raw_writel(MODE_BYPASS_FAST, CM_CLKEN_PLL); /* go to bypass, fast relock */
- wait_on_value(BIT0|BIT1, BIT0, CM_IDLEST_CKGEN, LDELAY); /* wait till in bypass */
- sdelay(1000);
- /* set clock selection and dpll dividers. */
- __raw_writel(DPLL_VAL, CM_CLKSEL1_PLL); /* set pll for target rate */
- __raw_writel(COMMIT_DIVIDERS, PRCM_CLKCFG_CTRL); /* commit dividers */
- sdelay(10000);
- __raw_writel(DPLL_LOCK, CM_CLKEN_PLL); /* enable dpll */
- sdelay(10000);
- wait_on_value(BIT0|BIT1, BIT1, CM_IDLEST_CKGEN, LDELAY); /*wait for dpll lock */
- }else if(running_in_flash()){
- /* if running from flash, need to jump to small relocated code area in SRAM.
- * This is the only safe spot to do configurations from.
- */
- (*f_lock_pll)(PRCM_CLKCFG_CTRL, CM_CLKEN_PLL, DPLL_LOCK, CM_IDLEST_CKGEN);
- }
-
- __raw_writel(DPLL_LOCK|APLL_LOCK, CM_CLKEN_PLL); /* enable apll */
- wait_on_value(BIT8, BIT8, CM_IDLEST_CKGEN, LDELAY); /* wait for apll lock */
- sdelay(1000);
-}
-
-/**************************************************************************
- * make_cs1_contiguous() - for es2 and above remap cs1 behind cs0 to allow
- * command line mem=xyz use all memory with out discontigious support
- * compiled in. Could do it at the ATAG, but there really is two banks...
- * Called as part of 2nd phase DDR init.
- **************************************************************************/
-void make_cs1_contiguous(void)
-{
- u32 size, a_add_low, a_add_high;
-
- size = get_sdr_cs_size(SDRC_CS0_OSET);
- size /= SZ_32M; /* find size to offset CS1 */
- a_add_high = (size & 3) << 8; /* set up low field */
- a_add_low = (size & 0x3C) >> 2; /* set up high field */
- __raw_writel((a_add_high|a_add_low),SDRC_CS_CFG);
-
-}
-
-/********************************************************
- * mem_ok() - test used to see if timings are correct
- * for a part. Helps in gussing which part
- * we are currently using.
- *******************************************************/
-u32 mem_ok(void)
-{
- u32 val1, val2;
- u32 pattern = 0x12345678;
-
- __raw_writel(0x0,OMAP2420_SDRC_CS0+0x400); /* clear pos A */
- __raw_writel(pattern, OMAP2420_SDRC_CS0); /* pattern to pos B */
- __raw_writel(0x0,OMAP2420_SDRC_CS0+4); /* remove pattern off the bus */
- val1 = __raw_readl(OMAP2420_SDRC_CS0+0x400); /* get pos A value */
- val2 = __raw_readl(OMAP2420_SDRC_CS0); /* get val2 */
-
- if ((val1 != 0) || (val2 != pattern)) /* see if pos A value changed*/
- return(0);
- else
- return(1);
-}
-
-
-/********************************************************
- * sdrc_init() - init the sdrc chip selects CS0 and CS1
- * - early init routines, called from flash or
- * SRAM.
- *******************************************************/
-void sdrc_init(void)
-{
- #define EARLY_INIT 1
- do_sdrc_init(SDRC_CS0_OSET, EARLY_INIT); /* only init up first bank here */
-}
-
-/*************************************************************************
- * do_sdrc_init(): initialize the SDRAM for use.
- * -called from low level code with stack only.
- * -code sets up SDRAM timing and muxing for 2422 or 2420.
- * -optimal settings can be placed here, or redone after i2c
- * inspection of board info
- *
- * This is a bit ugly, but should handle all memory moduels
- * used with the H4. The first time though this code from s_init()
- * we configure the first chip select. Later on we come back and
- * will configure the 2nd chip select if it exists.
- *
- **************************************************************************/
-void do_sdrc_init(u32 offset, u32 early)
-{
- u32 cpu, dllen=0, rev, common=0, cs0=0, pmask=0, pass_type, mtype;
- sdrc_data_t *sdata; /* do not change type */
- u32 a, b, r;
-
- static const sdrc_data_t sdrc_2422 =
- {
- H4_2422_SDRC_SHARING, H4_2422_SDRC_MDCFG_0_DDR, 0 , H4_2422_SDRC_ACTIM_CTRLA_0,
- H4_2422_SDRC_ACTIM_CTRLB_0, H4_2422_SDRC_RFR_CTRL, H4_2422_SDRC_MR_0_DDR,
- 0, H4_2422_SDRC_DLLAB_CTRL
- };
- static const sdrc_data_t sdrc_2420 =
- {
- H4_2420_SDRC_SHARING, H4_2420_SDRC_MDCFG_0_DDR, H4_2420_SDRC_MDCFG_0_SDR,
- H4_2420_SDRC_ACTIM_CTRLA_0, H4_2420_SDRC_ACTIM_CTRLB_0,
- H4_2420_SDRC_RFR_CTRL, H4_2420_SDRC_MR_0_DDR, H4_2420_SDRC_MR_0_SDR,
- H4_2420_SDRC_DLLAB_CTRL
- };
-
- if (offset == SDRC_CS0_OSET)
- cs0 = common = 1; /* int regs shared between both chip select */
-
- cpu = get_cpu_type();
- rev = get_cpu_rev();
-
- /* warning generated, though code generation is correct. this may bite later,
- * but is ok for now. there is only so much C code you can do on stack only
- * operation.
- */
- if (cpu == CPU_2422){
- sdata = (sdrc_data_t *)&sdrc_2422;
- pass_type = STACKED;
- } else{
- sdata = (sdrc_data_t *)&sdrc_2420;
- pass_type = IP_DDR;
- }
-
- __asm__ __volatile__("": : :"memory"); /* limit compiler scope */
-
- if (!early && (((mtype = get_mem_type()) == DDR_COMBO)||(mtype == DDR_STACKED))) {
- if(mtype == DDR_COMBO){
- pmask = BIT2;/* combo part has a shared CKE signal, can't use feature */
- pass_type = COMBO_DDR; /* CS1 config */
- __raw_writel((__raw_readl(SDRC_POWER)) & ~pmask, SDRC_POWER);
- }
- if(rev != CPU_2420_2422_ES1) /* for es2 and above smooth things out */
- make_cs1_contiguous();
- }
-
-next_mem_type:
- if (common) { /* do a SDRC reset between types to clear regs*/
- __raw_writel(SOFTRESET, SDRC_SYSCONFIG); /* reset sdrc */
- wait_on_value(BIT0, BIT0, SDRC_STATUS, 12000000);/* wait till reset done set */
- __raw_writel(0, SDRC_SYSCONFIG); /* clear soft reset */
- __raw_writel(sdata->sdrc_sharing, SDRC_SHARING);
-#ifdef POWER_SAVE
- __raw_writel(__raw_readl(SMS_SYSCONFIG)|SMART_IDLE, SMS_SYSCONFIG);
- __raw_writel(sdata->sdrc_sharing|SMART_IDLE, SDRC_SHARING);
- __raw_writel((__raw_readl(SDRC_POWER)|BIT6), SDRC_POWER);
-#endif
- }
-
- if ((pass_type == IP_DDR) || (pass_type == STACKED)) /* (IP ddr-CS0),(2422-CS0/CS1) */
- __raw_writel(sdata->sdrc_mdcfg_0_ddr, SDRC_MCFG_0+offset);
- else if (pass_type == COMBO_DDR){ /* (combo-CS0/CS1) */
- __raw_writel(H4_2420_COMBO_MDCFG_0_DDR,SDRC_MCFG_0+offset);
- } else if (pass_type == IP_SDR){ /* ip sdr-CS0 */
- __raw_writel(sdata->sdrc_mdcfg_0_sdr, SDRC_MCFG_0+offset);
- }
-
- a = sdata->sdrc_actim_ctrla_0;
- b = sdata->sdrc_actim_ctrlb_0;
- r = sdata->sdrc_dllab_ctrl;
-
- /* work around ES1 DDR issues */
- if((pass_type != IP_SDR) && (rev == CPU_2420_2422_ES1)){
- a = H4_242x_SDRC_ACTIM_CTRLA_0_ES1;
- b = H4_242x_SDRC_ACTIM_CTRLB_0_ES1;
- r = H4_242x_SDRC_RFR_CTRL_ES1;
- }
-
- if (cs0) {
- __raw_writel(a, SDRC_ACTIM_CTRLA_0);
- __raw_writel(b, SDRC_ACTIM_CTRLB_0);
- } else {
- __raw_writel(a, SDRC_ACTIM_CTRLA_1);
- __raw_writel(b, SDRC_ACTIM_CTRLB_1);
- }
- __raw_writel(r, SDRC_RFR_CTRL+offset);
-
- /* init sequence for mDDR/mSDR using manual commands (DDR is a bit different) */
- __raw_writel(CMD_NOP, SDRC_MANUAL_0+offset);
- sdelay(5000); /* susposed to be 100us per design spec for mddr/msdr */
- __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_0+offset);
- __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0+offset);
- __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0+offset);
-
- /*
- * CSx SDRC Mode Register
- * Burst length = (4 - DDR) (2-SDR)
- * Serial mode
- * CAS latency = x
- */
- if(pass_type == IP_SDR)
- __raw_writel(sdata->sdrc_mr_0_sdr, SDRC_MR_0+offset);
- else
- __raw_writel(sdata->sdrc_mr_0_ddr, SDRC_MR_0+offset);
-
- /* NOTE: ES1 242x _BUG_ DLL + External Bandwidth fix*/
- if (rev == CPU_2420_2422_ES1){
- dllen = (BIT0|BIT3); /* es1 clear both bit0 and bit3 */
- __raw_writel((__raw_readl(SMS_CLASS_ARB0)|BURSTCOMPLETE_GROUP7)
- ,SMS_CLASS_ARB0);/* enable bust complete for lcd */
- }
- else
- dllen = BIT0|BIT1; /* es2, clear bit0, and 1 (set phase to 72) */
-
- /* enable & load up DLL with good value for 75MHz, and set phase to 90
- * ES1 recommends 90 phase, ES2 recommends 72 phase.
- */
- if (common && (pass_type != IP_SDR)) {
- __raw_writel(sdata->sdrc_dllab_ctrl, SDRC_DLLA_CTRL);
- __raw_writel(sdata->sdrc_dllab_ctrl & ~(BIT2|dllen), SDRC_DLLA_CTRL);
- __raw_writel(sdata->sdrc_dllab_ctrl, SDRC_DLLB_CTRL);
- __raw_writel(sdata->sdrc_dllab_ctrl & ~(BIT2|dllen) , SDRC_DLLB_CTRL);
- }
- sdelay(90000);
-
- if(mem_ok())
- return; /* STACKED, other configued type */
- ++pass_type; /* IPDDR->COMBODDR->IPSDR for CS0 */
- goto next_mem_type;
-}
-
-/*****************************************************
- * gpmc_init(): init gpmc bus
- * Init GPMC for x16, MuxMode (SDRAM in x32).
- * This code can only be executed from SRAM or SDRAM.
- *****************************************************/
-void gpmc_init(void)
-{
- u32 mux=0, mtype, mwidth, rev, tval;
-
- rev = get_cpu_rev();
- if (rev == CPU_2420_2422_ES1)
- tval = 1;
- else
- tval = 0; /* disable bit switched meaning */
-
- /* global settings */
- __raw_writel(0x10, GPMC_SYSCONFIG); /* smart idle */
- __raw_writel(0x0, GPMC_IRQENABLE); /* isr's sources masked */
- __raw_writel(tval, GPMC_TIMEOUT_CONTROL);/* timeout disable */
-#ifdef CONFIG_SYS_NAND_BOOT
- __raw_writel(0x001, GPMC_CONFIG); /* set nWP, disable limited addr */
-#else
- __raw_writel(0x111, GPMC_CONFIG); /* set nWP, disable limited addr */
-#endif
-
- /* discover bus connection from sysboot */
- if (is_gpmc_muxed() == GPMC_MUXED)
- mux = BIT9;
- mtype = get_gpmc0_type();
- mwidth = get_gpmc0_width();
-
- /* setup cs0 */
- __raw_writel(0x0, GPMC_CONFIG7_0); /* disable current map */
- sdelay(1000);
-
-#ifdef CONFIG_SYS_NAND_BOOT
- __raw_writel(H4_24XX_GPMC_CONFIG1_0|mtype|mwidth, GPMC_CONFIG1_0);
-#else
- __raw_writel(H4_24XX_GPMC_CONFIG1_0|mux|mtype|mwidth, GPMC_CONFIG1_0);
-#endif
-
-#ifdef PRCM_CONFIG_III
- __raw_writel(H4_24XX_GPMC_CONFIG2_0, GPMC_CONFIG2_0);
-#endif
- __raw_writel(H4_24XX_GPMC_CONFIG3_0, GPMC_CONFIG3_0);
- __raw_writel(H4_24XX_GPMC_CONFIG4_0, GPMC_CONFIG4_0);
-#ifdef PRCM_CONFIG_III
- __raw_writel(H4_24XX_GPMC_CONFIG5_0, GPMC_CONFIG5_0);
- __raw_writel(H4_24XX_GPMC_CONFIG6_0, GPMC_CONFIG6_0);
-#endif
- __raw_writel(H4_24XX_GPMC_CONFIG7_0, GPMC_CONFIG7_0);/* enable new mapping */
- sdelay(2000);
-
- /* setup cs1 */
- __raw_writel(0, GPMC_CONFIG7_1); /* disable any mapping */
- sdelay(1000);
- __raw_writel(H4_24XX_GPMC_CONFIG1_1|mux, GPMC_CONFIG1_1);
- __raw_writel(H4_24XX_GPMC_CONFIG2_1, GPMC_CONFIG2_1);
- __raw_writel(H4_24XX_GPMC_CONFIG3_1, GPMC_CONFIG3_1);
- __raw_writel(H4_24XX_GPMC_CONFIG4_1, GPMC_CONFIG4_1);
- __raw_writel(H4_24XX_GPMC_CONFIG5_1, GPMC_CONFIG5_1);
- __raw_writel(H4_24XX_GPMC_CONFIG6_1, GPMC_CONFIG6_1);
- __raw_writel(H4_24XX_GPMC_CONFIG7_1, GPMC_CONFIG7_1); /* enable mapping */
- sdelay(2000);
-}
diff --git a/board/ti/omap2420h4/omap2420h4.c b/board/ti/omap2420h4/omap2420h4.c
deleted file mode 100644
index 532e989..0000000
--- a/board/ti/omap2420h4/omap2420h4.c
+++ /dev/null
@@ -1,867 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <common.h>
-#include <netdev.h>
-#include <asm/arch/omap2420.h>
-#include <asm/io.h>
-#include <asm/arch/bits.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/sys_info.h>
-#include <asm/arch/mem.h>
-#include <i2c.h>
-#include <asm/mach-types.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void wait_for_command_complete(unsigned int wd_base);
-
-/*******************************************************
- * Routine: delay
- * Description: spinning delay to use before udelay works
- ******************************************************/
-static inline void delay (unsigned long loops)
-{
- __asm__ volatile ("1:\n" "subs %0, %1, #1\n"
- "bne 1b":"=r" (loops):"0" (loops));
-}
-
-/*****************************************
- * Routine: board_init
- * Description: Early hardware init.
- *****************************************/
-int board_init (void)
-{
- gpmc_init(); /* in SRAM or SDRM, finish GPMC */
-
- gd->bd->bi_arch_number = MACH_TYPE_OMAP_H4; /* board id for linux */
- gd->bd->bi_boot_params = (OMAP2420_SDRC_CS0+0x100); /* adress of boot parameters */
-
- return 0;
-}
-
-/**********************************************************
- * Routine: try_unlock_sram()
- * Description: If chip is GP type, unlock the SRAM for
- * general use.
- ***********************************************************/
-void try_unlock_sram(void)
-{
- /* if GP device unlock device SRAM for general use */
- if (get_device_type() == GP_DEVICE) {
- __raw_writel(0xFF, A_REQINFOPERM0);
- __raw_writel(0xCFDE, A_READPERM0);
- __raw_writel(0xCFDE, A_WRITEPERM0);
- }
-}
-
-/**********************************************************
- * Routine: s_init
- * Description: Does early system init of muxing and clocks.
- * - Called path is with sram stack.
- **********************************************************/
-void s_init(void)
-{
- int in_sdram = running_in_sdram();
-
- watchdog_init();
- set_muxconf_regs();
- delay(100);
- try_unlock_sram();
-
- if(!in_sdram)
- prcm_init();
-
- peripheral_enable();
- icache_enable();
- if (!in_sdram)
- sdrc_init();
-}
-
-/*******************************************************
- * Routine: misc_init_r
- * Description: Init ethernet (done here so udelay works)
- ********************************************************/
-int misc_init_r (void)
-{
- ether_init(); /* better done here so timers are init'ed */
- return(0);
-}
-
-/****************************************
- * Routine: watchdog_init
- * Description: Shut down watch dogs
- *****************************************/
-void watchdog_init(void)
-{
- /* There are 4 watch dogs. 1 secure, and 3 general purpose.
- * The ROM takes care of the secure one. Of the 3 GP ones,
- * 1 can reset us directly, the other 2 only generate MPU interrupts.
- */
- __raw_writel(WD_UNLOCK1 ,WD2_BASE+WSPR);
- wait_for_command_complete(WD2_BASE);
- __raw_writel(WD_UNLOCK2 ,WD2_BASE+WSPR);
-
-#if MPU_WD_CLOCKED /* value 0x10 stick on aptix, BIT4 polarity seems oppsite*/
- __raw_writel(WD_UNLOCK1 ,WD3_BASE+WSPR);
- wait_for_command_complete(WD3_BASE);
- __raw_writel(WD_UNLOCK2 ,WD3_BASE+WSPR);
-
- __raw_writel(WD_UNLOCK1 ,WD4_BASE+WSPR);
- wait_for_command_complete(WD4_BASE);
- __raw_writel(WD_UNLOCK2 ,WD4_BASE+WSPR);
-#endif
-}
-
-/******************************************************
- * Routine: wait_for_command_complete
- * Description: Wait for posting to finish on watchdog
- ******************************************************/
-void wait_for_command_complete(unsigned int wd_base)
-{
- int pending = 1;
- do {
- pending = __raw_readl(wd_base+WWPS);
- } while (pending);
-}
-
-/*******************************************************************
- * Routine:ether_init
- * Description: take the Ethernet controller out of reset and wait
- * for the EEPROM load to complete.
- ******************************************************************/
-void ether_init (void)
-{
-#ifdef CONFIG_LAN91C96
- int cnt = 20;
-
- __raw_writeb(0x3,OMAP2420_CTRL_BASE+0x10a); /*protect->gpio95 */
-
- __raw_writew(0x0, LAN_RESET_REGISTER);
- do {
- __raw_writew(0x1, LAN_RESET_REGISTER);
- udelay (100);
- if (cnt == 0)
- goto h4reset_err_out;
- --cnt;
- } while (__raw_readw(LAN_RESET_REGISTER) != 0x1);
-
- cnt = 20;
-
- do {
- __raw_writew(0x0, LAN_RESET_REGISTER);
- udelay (100);
- if (cnt == 0)
- goto h4reset_err_out;
- --cnt;
- } while (__raw_readw(LAN_RESET_REGISTER) != 0x0000);
- udelay (1000);
-
- *((volatile unsigned char *) ETH_CONTROL_REG) &= ~0x01;
- udelay (1000);
-
- h4reset_err_out:
- return;
-#endif
-}
-
-/**********************************************
- * Routine: dram_init
- * Description: sets uboots idea of sdram size
- **********************************************/
-int dram_init(void)
-{
- unsigned int size0=0,size1=0;
- u32 mtype, btype;
- u8 chg_on = 0x5; /* enable charge of back up battery */
- u8 vmode_on = 0x8C;
- #define NOT_EARLY 0
-
- i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); /* need this a bit early */
-
- btype = get_board_type();
- mtype = get_mem_type();
-
- display_board_info(btype);
- if (btype == BOARD_H4_MENELAUS){
- update_mux(btype,mtype); /* combo part on menelaus */
- i2c_write(I2C_MENELAUS, 0x20, 1, &chg_on, 1); /*fix POR reset bug */
- i2c_write(I2C_MENELAUS, 0x2, 1, &vmode_on, 1); /* VCORE change on VMODE */
- }
-
- if ((mtype == DDR_COMBO) || (mtype == DDR_STACKED)) {
- do_sdrc_init(SDRC_CS1_OSET, NOT_EARLY); /* init other chip select */
- }
- size0 = get_sdr_cs_size(SDRC_CS0_OSET);
- size1 = get_sdr_cs_size(SDRC_CS1_OSET);
-
- gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, size0 + size1);
-
- return 0;
-}
-
-void dram_init_banksize(void)
-{
- unsigned int size0, size1;
- u32 rev;
-
- rev = get_cpu_rev();
- size0 = get_sdr_cs_size(SDRC_CS0_OSET);
- size1 = get_sdr_cs_size(SDRC_CS1_OSET);
-
- if(rev == CPU_2420_2422_ES1) /* ES1's 128MB remap granularity isn't worth doing */
- gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
- else /* ES2 and above can remap at 32MB granularity */
- gd->bd->bi_dram[1].start = PHYS_SDRAM_1+size0;
- gd->bd->bi_dram[1].size = size1;
-
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = size0;
-}
-
-/**********************************************************
- * Routine: set_muxconf_regs
- * Description: Setting up the configuration Mux registers
- * specific to the hardware
- *********************************************************/
-void set_muxconf_regs (void)
-{
- muxSetupSDRC();
- muxSetupGPMC();
- muxSetupUsb0();
- muxSetupUart3();
- muxSetupI2C1();
- muxSetupUART1();
- muxSetupLCD();
- muxSetupCamera();
- muxSetupMMCSD();
- muxSetupTouchScreen();
- muxSetupHDQ();
-}
-
-/*****************************************************************
- * Routine: peripheral_enable
- * Description: Enable the clks & power for perifs (GPT2, UART1,...)
- ******************************************************************/
-void peripheral_enable(void)
-{
- unsigned int v, if_clks=0, func_clks=0;
-
- /* Enable GP2 timer.*/
- if_clks |= BIT4;
- func_clks |= BIT4;
- v = __raw_readl(CM_CLKSEL2_CORE) | 0x4; /* Sys_clk input OMAP2420_GPT2 */
- __raw_writel(v, CM_CLKSEL2_CORE);
- __raw_writel(0x1, CM_CLKSEL_WKUP);
-
-#ifdef CONFIG_SYS_NS16550
- /* Enable UART1 clock */
- func_clks |= BIT21;
- if_clks |= BIT21;
-#endif
- v = __raw_readl(CM_ICLKEN1_CORE) | if_clks; /* Interface clocks on */
- __raw_writel(v,CM_ICLKEN1_CORE );
- v = __raw_readl(CM_FCLKEN1_CORE) | func_clks; /* Functional Clocks on */
- __raw_writel(v, CM_FCLKEN1_CORE);
- delay(1000);
-
-#ifndef KERNEL_UPDATED
- {
-#define V1 0xffffffff
-#define V2 0x00000007
-
- __raw_writel(V1, CM_FCLKEN1_CORE);
- __raw_writel(V2, CM_FCLKEN2_CORE);
- __raw_writel(V1, CM_ICLKEN1_CORE);
- __raw_writel(V1, CM_ICLKEN2_CORE);
- }
-#endif
-}
-
-/****************************************
- * Routine: muxSetupUsb0 (ostboot)
- * Description: Setup usb muxing
- *****************************************/
-void muxSetupUsb0(void)
-{
- volatile uint8 *MuxConfigReg;
- volatile uint32 *otgCtrlReg;
-
- MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_PUEN;
- *MuxConfigReg &= (uint8)(~0x1F);
-
- MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_VP;
- *MuxConfigReg &= (uint8)(~0x1F);
-
- MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_VM;
- *MuxConfigReg &= (uint8)(~0x1F);
-
- MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_RCV;
- *MuxConfigReg &= (uint8)(~0x1F);
-
- MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_TXEN;
- *MuxConfigReg &= (uint8)(~0x1F);
-
- MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_SE0;
- *MuxConfigReg &= (uint8)(~0x1F);
-
- MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_USB0_DAT;
- *MuxConfigReg &= (uint8)(~0x1F);
-
- /* setup for USB VBus detection */
- otgCtrlReg = (volatile uint32 *)USB_OTG_CTRL;
- *otgCtrlReg |= 0x00040000; /* bit 18 */
-}
-
-/****************************************
- * Routine: muxSetupUart3 (ostboot)
- * Description: Setup uart3 muxing
- *****************************************/
-void muxSetupUart3(void)
-{
- volatile uint8 *MuxConfigReg;
-
- MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_UART3_TX_IRTX;
- *MuxConfigReg &= (uint8)(~0x1F);
-
- MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_UART3_RX_IRRX;
- *MuxConfigReg &= (uint8)(~0x1F);
-}
-
-/****************************************
- * Routine: muxSetupI2C1 (ostboot)
- * Description: Setup i2c muxing
- *****************************************/
-void muxSetupI2C1(void)
-{
- volatile unsigned char *MuxConfigReg;
-
- /* I2C1 Clock pin configuration, PIN = M19 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_I2C1_SCL;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* I2C1 Data pin configuration, PIN = L15 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_I2C1_SDA;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* Pull-up required on data line */
- /* external pull-up already present. */
- /* *MuxConfigReg |= 0x18 ;*/ /* Mode = 0, PullTypeSel=PU, PullUDEnable=Enabled */
-}
-
-/****************************************
- * Routine: muxSetupUART1 (ostboot)
- * Description: Set up uart1 muxing
- *****************************************/
-void muxSetupUART1(void)
-{
- volatile unsigned char *MuxConfigReg;
-
- /* UART1_CTS pin configuration, PIN = D21 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_CTS;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* UART1_RTS pin configuration, PIN = H21 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_RTS;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* UART1_TX pin configuration, PIN = L20 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_TX;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* UART1_RX pin configuration, PIN = T21 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_UART1_RX;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-}
-
-/****************************************
- * Routine: muxSetupLCD (ostboot)
- * Description: Setup lcd muxing
- *****************************************/
-void muxSetupLCD(void)
-{
- volatile unsigned char *MuxConfigReg;
-
- /* LCD_D0 pin configuration, PIN = Y7 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D0;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* LCD_D1 pin configuration, PIN = P10 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D1;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* LCD_D2 pin configuration, PIN = V8 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D2;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* LCD_D3 pin configuration, PIN = Y8 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D3;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* LCD_D4 pin configuration, PIN = W8 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D4;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* LCD_D5 pin configuration, PIN = R10 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D5;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* LCD_D6 pin configuration, PIN = Y9 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D6;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* LCD_D7 pin configuration, PIN = V9 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D7;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* LCD_D8 pin configuration, PIN = W9 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D8;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* LCD_D9 pin configuration, PIN = P11 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D9;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* LCD_D10 pin configuration, PIN = V10 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D10;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* LCD_D11 pin configuration, PIN = Y10 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D11;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* LCD_D12 pin configuration, PIN = W10 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D12;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* LCD_D13 pin configuration, PIN = R11 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D13;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* LCD_D14 pin configuration, PIN = V11 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D14;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* LCD_D15 pin configuration, PIN = W11 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D15;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* LCD_D16 pin configuration, PIN = P12 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D16;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* LCD_D17 pin configuration, PIN = R12 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_D17;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* LCD_PCLK pin configuration, PIN = W6 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_PCLK;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* LCD_VSYNC pin configuration, PIN = V7 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_VSYNC;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* LCD_HSYNC pin configuration, PIN = Y6 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_HSYNC;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* LCD_ACBIAS pin configuration, PIN = W7 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_DSS_ACBIAS;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-}
-
-/****************************************
- * Routine: muxSetupCamera (ostboot)
- * Description: Setup camera muxing
- *****************************************/
-void muxSetupCamera(void)
-{
- volatile unsigned char *MuxConfigReg;
-
- /* CAMERA_RSTZ pin configuration, PIN = Y16 */
- /* CAM_RST is connected through the I2C IO expander.*/
- /* MuxConfigReg = (volatile unsigned char *), CONTROL_PADCONF_SYS_NRESWARM*/
- /* *MuxConfigReg = 0x00 ; / * Mode = 0, PUPD=Disabled */
-
- /* CAMERA_XCLK pin configuration, PIN = U3 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_XCLK;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* CAMERA_LCLK pin configuration, PIN = V5 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_LCLK;
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* CAMERA_VSYNC pin configuration, PIN = U2 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_VS,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* CAMERA_HSYNC pin configuration, PIN = T3 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_HS,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* CAMERA_DAT0 pin configuration, PIN = T4 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D0,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* CAMERA_DAT1 pin configuration, PIN = V2 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D1,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* CAMERA_DAT2 pin configuration, PIN = V3 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D2,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* CAMERA_DAT3 pin configuration, PIN = U4 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D3,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* CAMERA_DAT4 pin configuration, PIN = W2 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D4,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* CAMERA_DAT5 pin configuration, PIN = V4 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D5,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* CAMERA_DAT6 pin configuration, PIN = W3 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D6,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* CAMERA_DAT7 pin configuration, PIN = Y2 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D7,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* CAMERA_DAT8 pin configuration, PIN = Y4 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D8,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* CAMERA_DAT9 pin configuration, PIN = V6 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_D9,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-}
-
-/****************************************
- * Routine: muxSetupMMCSD (ostboot)
- * Description: set up MMC muxing
- *****************************************/
-void muxSetupMMCSD(void)
-{
- volatile unsigned char *MuxConfigReg;
-
- /* SDMMC_CLKI pin configuration, PIN = H15 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CLKI,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* SDMMC_CLKO pin configuration, PIN = G19 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CLKO,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* SDMMC_CMD pin configuration, PIN = H18 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CMD,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
- /* External pull-ups are present. */
- /* *MuxConfigReg |= 0x18 ; #/ PullUDEnable=Enabled, PullTypeSel=PU */
-
- /* SDMMC_DAT0 pin configuration, PIN = F20 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT0,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
- /* External pull-ups are present. */
- /* *MuxConfigReg |= 0x18 ; #/ PullUDEnable=Enabled, PullTypeSel=PU */
-
- /* SDMMC_DAT1 pin configuration, PIN = H14 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT1,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
- /* External pull-ups are present. */
- /* *MuxConfigReg |= 0x18 ; #/ PullUDEnable=Enabled, PullTypeSel=PU */
-
- /* SDMMC_DAT2 pin configuration, PIN = E19 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT2,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
- /* External pull-ups are present. */
- /* *MuxConfigReg |= 0x18 ; #/ PullUDEnable=Enabled, PullTypeSel=PU */
-
- /* SDMMC_DAT3 pin configuration, PIN = D19 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT3,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
- /* External pull-ups are present. */
- /* *MuxConfigReg |= 0x18 ; #/ PullUDEnable=Enabled, PullTypeSel=PU */
-
- /* SDMMC_DDIR0 pin configuration, PIN = F19 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR0,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* SDMMC_DDIR1 pin configuration, PIN = E20 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR1,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* SDMMC_DDIR2 pin configuration, PIN = F18 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR2,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* SDMMC_DDIR3 pin configuration, PIN = E18 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_DAT_DIR3,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* SDMMC_CDIR pin configuration, PIN = G18 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MMC_CMD_DIR,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* MMC_CD pin configuration, PIN = B3 ---2420IP ONLY---*/
- /* MMC_CD for 2422IP=K1 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SDRC_A14,
- *MuxConfigReg = 0x03 ; /* Mode = 3, PUPD=Disabled */
-
- /* MMC_WP pin configuration, PIN = B4 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SDRC_A13,
- *MuxConfigReg = 0x03 ; /* Mode = 3, PUPD=Disabled */
-}
-
-/******************************************
- * Routine: muxSetupTouchScreen (ostboot)
- * Description: Set up touch screen muxing
- *******************************************/
-void muxSetupTouchScreen(void)
-{
- volatile unsigned char *MuxConfigReg;
-
- /* SPI1_CLK pin configuration, PIN = U18 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_CLK,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* SPI1_MOSI pin configuration, PIN = V20 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_SIMO,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* SPI1_MISO pin configuration, PIN = T18 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_SOMI,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* SPI1_nCS0 pin configuration, PIN = U19 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_SPI1_NCS0,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-
- /* PEN_IRQ pin configuration, PIN = P20 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_MCBSP1_FSR,
- *MuxConfigReg = 0x03 ; /* Mode = 3, PUPD=Disabled */
-}
-
-/****************************************
- * Routine: muxSetupHDQ (ostboot)
- * Description: setup 1wire mux
- *****************************************/
-void muxSetupHDQ(void)
-{
- volatile unsigned char *MuxConfigReg;
-
- /* HDQ_SIO pin configuration, PIN = N18 */
- MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_HDQ_SIO,
- *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled */
-}
-
-/***************************************************************
- * Routine: muxSetupGPMC (ostboot)
- * Description: Configures balls which cam up in protected mode
- ***************************************************************/
-void muxSetupGPMC(void)
-{
- volatile uint8 *MuxConfigReg;
- volatile unsigned int *MCR = (volatile unsigned int *)0x4800008C;
-
- /* gpmc_io_dir */
- *MCR = 0x19000000;
-
- /* NOR FLASH CS0 */
- /* signal - Gpmc_clk; pin - J4; offset - 0x0088; mode - 0; Byte-3 Pull/up - N/A */
- MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPMC_D2_BYTE3,
- *MuxConfigReg = 0x00 ;
-
- /* signal - Gpmc_iodir; pin - n2; offset - 0x008C; mode - 1; Byte-3 Pull/up - N/A */
- MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPMC_NCS0_BYTE3,
- *MuxConfigReg = 0x01 ;
-
- /* MPDB(Multi Port Debug Port) CS1 */
- /* signal - gpmc_ncs1; pin - N8; offset - 0x008C; mode - 0; Byte-1 Pull/up - N/A */
- MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPMC_NCS0_BYTE1,
- *MuxConfigReg = 0x00 ;
-
- /* signal - Gpmc_ncs2; pin - E2; offset - 0x008C; mode - 0; Byte-2 Pull/up - N/A */
- MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_GPMC_NCS0_BYTE2,
- *MuxConfigReg = 0x00 ;
-}
-
-/****************************************************************
- * Routine: muxSetupSDRC (ostboot)
- * Description: Configures balls which come up in protected mode
- ****************************************************************/
-void muxSetupSDRC(void)
-{
- volatile uint8 *MuxConfigReg;
-
- /* signal - sdrc_ncs1; pin - C12; offset - 0x00A0; mode - 0; Byte-1 Pull/up - N/A */
- MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_SDRC_NCS0_BYTE1,
- *MuxConfigReg = 0x00 ;
-
- /* signal - sdrc_a12; pin - D11; offset - 0x0030; mode - 0; Byte-2 Pull/up - N/A */
- MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_SDRC_A14_BYTE2,
- *MuxConfigReg = 0x00 ;
-
- /* signal - sdrc_cke1; pin - B13; offset - 0x00A0; mode - 0; Byte-3 Pull/up - N/A */
- MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_SDRC_NCS0_BYTE3,
- *MuxConfigReg = 0x00;
-
- if (get_cpu_type() == CPU_2422) {
- MuxConfigReg = (volatile uint8 *)CONTROL_PADCONF_SDRC_A14_BYTE0,
- *MuxConfigReg = 0x1b;
- }
-}
-
-/*****************************************************************************
- * Routine: update_mux()
- * Description: Update balls which are different beween boards. All should be
- * updated to match functionaly. However, I'm only updating ones
- * which I'll be using for now. When power comes into play they
- * all need updating.
- *****************************************************************************/
-void update_mux(u32 btype,u32 mtype)
-{
- u32 cpu, base = OMAP2420_CTRL_BASE;
- cpu = get_cpu_type();
-
- if (btype == BOARD_H4_MENELAUS) {
- if (cpu == CPU_2420) {
- /* PIN = B3, GPIO.0->KBR5, mode 3, (pun?),-DO-*/
- __raw_writeb(0x3, base+0x30);
- /* PIN = B13, GPIO.38->KBC6, mode 3, (pun?)-DO-*/
- __raw_writeb(0x3, base+0xa3);
- /* PIN = F1, GPIO.25->HSUSBxx mode 3, (for external HS USB)*/
- /* PIN = H1, GPIO.26->HSUSBxx mode 3, (for external HS USB)*/
- /* PIN = K1, GPMC_ncs6 mode 0, (on board nand access)*/
- /* PIN = L2, GPMC_ncs67 mode 0, (for external HS USB)*/
- /* PIN = M1 (HSUSBOTG) */
- /* PIN = P1, GPIO.35->MEN_POK mode 3, (menelaus powerok)-DO-*/
- __raw_writeb(0x3, base+0x9d);
- /* PIN = U32, (WLAN_CLKREQ) */
- /* PIN = Y11, WLAN */
- /* PIN = AA4, GPIO.15->KBC2, mode 3, -DO- */
- __raw_writeb(0x3, base+0xe7);
- /* PIN = AA8, mDOC */
- /* PIN = AA10, BT */
- /* PIN = AA13, WLAN */
- /* PIN = M18 GPIO.96->MMC2_WP mode 3 -DO- */
- __raw_writeb(0x3, base+0x10e);
- /* PIN = N19 GPIO.98->WLAN_INT mode 3 -DO- */
- __raw_writeb(0x3, base+0x110);
- /* PIN = J15 HHUSB */
- /* PIN = H19 HSUSB */
- /* PIN = W13, P13, R13, W16 ... */
- /* PIN = V12 GPIO.25->I2C_CAMEN mode 3 -DO- */
- __raw_writeb(0x3, base+0xde);
- /* PIN = W19 sys_nirq->MENELAUS_INT mode 0 -DO- */
- __raw_writeb(0x0, base+0x12c);
- /* PIN = AA17->sys_clkreq mode 0 -DO- */
- __raw_writeb(0x0, base+0x136);
- } else if (cpu == CPU_2422) {
- /* PIN = B3, GPIO.0->nc, mode 3, set above (pun?)*/
- /* PIN = B13, GPIO.cke1->nc, mode 0, set above, (pun?)*/
- /* PIN = F1, GPIO.25->HSUSBxx mode 3, (for external HS USB)*/
- /* PIN = H1, GPIO.26->HSUSBxx mode 3, (for external HS USB)*/
- /* PIN = K1, GPMC_ncs6 mode 0, (on board nand access)*/
- __raw_writeb(0x0, base+0x92);
- /* PIN = L2, GPMC_ncs67 mode 0, (for external HS USB)*/
- /* PIN = M1 (HSUSBOTG) */
- /* PIN = P1, GPIO.35->MEN_POK mode 3, (menelaus powerok)-DO-*/
- __raw_writeb(0x3, base+0x10c);
- /* PIN = U32, (WLAN_CLKREQ) */
- /* PIN = AA4, GPIO.15->KBC2, mode 3, -DO- */
- __raw_writeb(0x3, base+0x30);
- /* PIN = AA8, mDOC */
- /* PIN = AA10, BT */
- /* PIN = AA12, WLAN */
- /* PIN = M18 GPIO.96->MMC2_WP mode 3 -DO- */
- __raw_writeb(0x3, base+0x10e);
- /* PIN = N19 GPIO.98->WLAN_INT mode 3 -DO- */
- __raw_writeb(0x3, base+0x110);
- /* PIN = J15 HHUSB */
- /* PIN = H19 HSUSB */
- /* PIN = W13, P13, R13, W16 ... */
- /* PIN = V12 GPIO.25->I2C_CAMEN mode 3 -DO- */
- __raw_writeb(0x3, base+0xde);
- /* PIN = W19 sys_nirq->MENELAUS_INT mode 0 -DO- */
- __raw_writeb(0x0, base+0x12c);
- /* PIN = AA17->sys_clkreq mode 0 -DO- */
- __raw_writeb(0x0, base+0x136);
- }
-
- } else if (btype == BOARD_H4_SDP) {
- if (cpu == CPU_2420) {
- /* PIN = B3, GPIO.0->nc mode 3, set above (pun?)*/
- /* PIN = B13, GPIO.cke1->nc, mode 0, set above, (pun?)*/
- /* Pin = Y11 VLNQ */
- /* Pin = AA4 VLNQ */
- /* Pin = AA6 VLNQ */
- /* Pin = AA8 VLNQ */
- /* Pin = AA10 VLNQ */
- /* Pin = AA12 VLNQ */
- /* PIN = M18 GPIO.96->KBR5 mode 3 -DO- */
- __raw_writeb(0x3, base+0x10e);
- /* PIN = N19 GPIO.98->KBC6 mode 3 -DO- */
- __raw_writeb(0x3, base+0x110);
- /* PIN = J15 MDOC_nDMAREQ */
- /* PIN = H19 GPIO.100->KBC2 mode 3 -DO- */
- __raw_writeb(0x3, base+0x114);
- /* PIN = W13, V12, P13, R13, W19, W16 ... */
- /* PIN = AA17 sys_clkreq->bt_clk_req mode 0 */
- } else if (cpu == CPU_2422) {
- /* PIN = B3, GPIO.0->MMC_CD, mode 3, set above */
- /* PIN = B13, GPIO.38->wlan_int, mode 3, (pun?)*/
- /* Pin = Y11 VLNQ */
- /* Pin = AA4 VLNQ */
- /* Pin = AA6 VLNQ */
- /* Pin = AA8 VLNQ */
- /* Pin = AA10 VLNQ */
- /* Pin = AA12 VLNQ */
- /* PIN = M18 GPIO.96->KBR5 mode 3 -DO- */
- __raw_writeb(0x3, base+0x10e);
- /* PIN = N19 GPIO.98->KBC6 mode 3 -DO- */
- __raw_writeb(0x3, base+0x110);
- /* PIN = J15 MDOC_nDMAREQ */
- /* PIN = H19 GPIO.100->KBC2 mode 3 -DO- */
- __raw_writeb(0x3, base+0x114);
- /* PIN = W13, V12, P13, R13, W19, W16 ... */
- /* PIN = AA17 sys_clkreq->bt_clk_req mode 0 */
- }
- }
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_LAN91C96
- rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE);
-#endif
- return rc;
-}
-#endif
diff --git a/board/ti/omap2420h4/sys_info.c b/board/ti/omap2420h4/sys_info.c
deleted file mode 100644
index b12011e..0000000
--- a/board/ti/omap2420h4/sys_info.c
+++ /dev/null
@@ -1,387 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/omap2420.h>
-#include <asm/io.h>
-#include <asm/arch/bits.h>
-#include <asm/arch/mem.h> /* get mem tables */
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/sys_info.h>
-#include <i2c.h>
-
-/**************************************************************************
- * get_prod_id() - get id info from chips
- ***************************************************************************/
-static u32 get_prod_id(void)
-{
- u32 p;
- p = __raw_readl(PRODUCTION_ID); /* get production ID */
- return((p & CPU_242X_PID_MASK) >> 16);
-}
-
-/**************************************************************************
- * get_cpu_type() - low level get cpu type
- * - no C globals yet.
- * - just looking to say if this is a 2422 or 2420 or ...
- * - to start with we will look at switch settings..
- * - 2422 id's same as 2420 for ES1 will rely on H4 board characteristics
- * (mux for 2420, non-mux for 2422).
- ***************************************************************************/
-u32 get_cpu_type(void)
-{
- u32 v;
-
- switch(get_prod_id()){
- case 1:;/* 2420 */
- case 2: return(CPU_2420); break; /* 2420 pop */
- case 4: return(CPU_2422); break;
- case 8: return(CPU_2423); break;
- default: break; /* early 2420/2422's unmarked */
- }
-
- v = __raw_readl(TAP_IDCODE_REG);
- v &= CPU_24XX_ID_MASK;
- if (v == CPU_2420_CHIPID) { /* currently 2420 and 2422 have same id */
- if (is_gpmc_muxed() == GPMC_MUXED) /* if mux'ed */
- return(CPU_2420);
- else
- return(CPU_2422);
- } else
- return(CPU_2420); /* don't know, say 2420 */
-}
-
-/******************************************
- * get_cpu_rev(void) - extract version info
- ******************************************/
-u32 get_cpu_rev(void)
-{
- u32 v;
- v = __raw_readl(TAP_IDCODE_REG);
- v = v >> 28;
- return(v+1); /* currently 2422 and 2420 match up */
-}
-/****************************************************
- * is_mem_sdr() - return 1 if mem type in use is SDR
- ****************************************************/
-u32 is_mem_sdr(void)
-{
- volatile u32 *burst = (volatile u32 *)(SDRC_MR_0+SDRC_CS0_OSET);
- if(*burst == H4_2420_SDRC_MR_0_SDR)
- return(1);
- return(0);
-}
-
-/***********************************************************
- * get_mem_type() - identify type of mDDR part used.
- * 2422 uses stacked DDR, 2 parts CS0/CS1.
- * 2420 may have 1 or 2, no good way to know...only init 1...
- * when eeprom data is up we can select 1 more.
- *************************************************************/
-u32 get_mem_type(void)
-{
- u32 cpu, sdr = is_mem_sdr();
-
- cpu = get_cpu_type();
- if (cpu == CPU_2422 || cpu == CPU_2423)
- return(DDR_STACKED);
-
- if(get_prod_id() == 0x2)
- return(XDR_POP);
-
- if (get_board_type() == BOARD_H4_MENELAUS)
- if(sdr)
- return(SDR_DISCRETE);
- else
- return(DDR_COMBO);
- else
- if(sdr) /* SDP + SDR kit */
- return(SDR_DISCRETE);
- else
- return(DDR_DISCRETE); /* origional SDP */
-}
-
-/***********************************************************************
- * get_cs0_size() - get size of chip select 0/1
- ************************************************************************/
-u32 get_sdr_cs_size(u32 offset)
-{
- u32 size;
- size = __raw_readl(SDRC_MCFG_0+offset) >> 8; /* get ram size field */
- size &= 0x2FF; /* remove unwanted bits */
- size *= SZ_2M; /* find size in MB */
- return(size);
-}
-
-/***********************************************************************
- * get_board_type() - get board type based on current production stats.
- * --- NOTE: 2 I2C EEPROMs will someday be populated with proper info.
- * when they are available we can get info from there. This should
- * be correct of all known boards up until today.
- ************************************************************************/
-u32 get_board_type(void)
-{
- if (i2c_probe(I2C_MENELAUS) == 0)
- return(BOARD_H4_MENELAUS);
- else
- return(BOARD_H4_SDP);
-}
-
-/******************************************************************
- * get_sysboot_value() - get init word settings (dip switch on h4)
- ******************************************************************/
-inline u32 get_sysboot_value(void)
-{
- return(0x00000FFF & __raw_readl(CONTROL_STATUS));
-}
-
-/***************************************************************************
- * get_gpmc0_base() - Return current address hardware will be
- * fetching from. The below effectively gives what is correct, its a bit
- * mis-leading compared to the TRM. For the most general case the mask
- * needs to be also taken into account this does work in practice.
- * - for u-boot we currently map:
- * -- 0 to nothing,
- * -- 4 to flash
- * -- 8 to enent
- * -- c to wifi
- ****************************************************************************/
-u32 get_gpmc0_base(void)
-{
- u32 b;
-
- b = __raw_readl(GPMC_CONFIG7_0);
- b &= 0x1F; /* keep base [5:0] */
- b = b << 24; /* ret 0x0b000000 */
- return(b);
-}
-
-/*****************************************************************
- * is_gpmc_muxed() - tells if address/data lines are multiplexed
- *****************************************************************/
-u32 is_gpmc_muxed(void)
-{
- u32 mux;
- mux = get_sysboot_value();
- if ((mux & (BIT0 | BIT1 | BIT2 | BIT3)) == (BIT0 | BIT2 | BIT3))
- return(GPMC_MUXED); /* NAND Boot mode */
- if (mux & BIT1) /* if mux'ed */
- return(GPMC_MUXED);
- else
- return(GPMC_NONMUXED);
-}
-
-/************************************************************************
- * get_gpmc0_type() - read sysboot lines to see type of memory attached
- ************************************************************************/
-u32 get_gpmc0_type(void)
-{
- u32 type;
- type = get_sysboot_value();
- if ((type & (BIT3|BIT2)) == (BIT3|BIT2))
- return(TYPE_NAND);
- else
- return(TYPE_NOR);
-}
-
-/*******************************************************************
- * get_gpmc0_width() - See if bus is in x8 or x16 (mainly for nand)
- *******************************************************************/
-u32 get_gpmc0_width(void)
-{
- u32 width;
- width = get_sysboot_value();
- if ((width & 0xF) == (BIT3|BIT2))
- return(WIDTH_8BIT);
- else
- return(WIDTH_16BIT);
-}
-
-/*********************************************************************
- * wait_on_value() - common routine to allow waiting for changes in
- * volatile regs.
- *********************************************************************/
-u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound)
-{
- u32 i = 0, val;
- do {
- ++i;
- val = __raw_readl(read_addr) & read_bit_mask;
- if (val == match_value)
- return(1);
- if (i==bound)
- return(0);
- } while (1);
-}
-
-/*********************************************************************
- * display_board_info() - print banner with board info.
- *********************************************************************/
-void display_board_info(u32 btype)
-{
- static const char cpu_2420 [] = "2420"; /* cpu type */
- static const char cpu_2422 [] = "2422";
- static const char cpu_2423 [] = "2423";
- static const char db_men [] = "Menelaus"; /* board type */
- static const char db_ip [] = "IP";
- static const char mem_sdr [] = "mSDR"; /* memory type */
- static const char mem_ddr [] = "mDDR";
- static const char t_tst [] = "TST"; /* security level */
- static const char t_emu [] = "EMU";
- static const char t_hs [] = "HS";
- static const char t_gp [] = "GP";
- static const char unk [] = "?";
-
- const char *cpu_s, *db_s, *mem_s, *sec_s;
- u32 cpu, rev, sec;
-
- rev = get_cpu_rev();
- cpu = get_cpu_type();
- sec = get_device_type();
-
- if(is_mem_sdr())
- mem_s = mem_sdr;
- else
- mem_s = mem_ddr;
-
- if(cpu == CPU_2423)
- cpu_s = cpu_2423;
- else if (cpu == CPU_2422)
- cpu_s = cpu_2422;
- else
- cpu_s = cpu_2420;
-
- if(btype == BOARD_H4_MENELAUS)
- db_s = db_men;
- else
- db_s = db_ip;
-
- switch(sec){
- case TST_DEVICE: sec_s = t_tst; break;
- case EMU_DEVICE: sec_s = t_emu; break;
- case HS_DEVICE: sec_s = t_hs; break;
- case GP_DEVICE: sec_s = t_gp; break;
- default: sec_s = unk;
- }
-
- printf("OMAP%s-%s revision %d\n", cpu_s, sec_s, rev-1);
- printf("TI H4 SDP Base Board + %s Daughter Board + %s \n", db_s, mem_s);
-}
-
-/*************************************************************************
- * get_board_rev() - setup to pass kernel board revision information
- * 0 = 242x IP platform (first 2xx boards)
- * 1 = 242x Menelaus platfrom.
- *************************************************************************/
-u32 get_board_rev(void)
-{
- u32 rev = 0;
- u32 btype = get_board_type();
-
- if (btype == BOARD_H4_MENELAUS){
- rev = 1;
- }
- return(rev);
-}
-
-/********************************************************
- * get_base(); get upper addr of current execution
- *******************************************************/
-u32 get_base(void)
-{
- u32 val;
- __asm__ __volatile__("mov %0, pc \n" : "=r" (val) : : "memory");
- val &= 0xF0000000;
- val >>= 28;
- return(val);
-}
-
-/********************************************************
- * get_base2(); get 2upper addr of current execution
- *******************************************************/
-u32 get_base2(void)
-{
- u32 val;
- __asm__ __volatile__("mov %0, pc \n" : "=r" (val) : : "memory");
- val &= 0xFF000000;
- val >>= 24;
- return(val);
-}
-
-/********************************************************
- * running_in_flash() - tell if currently running in
- * flash.
- *******************************************************/
-u32 running_in_flash(void)
-{
- if (get_base() < 4)
- return(1); /* in flash */
- return(0); /* running in SRAM or SDRAM */
-}
-
-/********************************************************
- * running_in_sram() - tell if currently running in
- * sram.
- *******************************************************/
-u32 running_in_sram(void)
-{
- if (get_base() == 4)
- return(1); /* in SRAM */
- return(0); /* running in FLASH or SDRAM */
-}
-/********************************************************
- * running_in_sdram() - tell if currently running in
- * flash.
- *******************************************************/
-u32 running_in_sdram(void)
-{
- if (get_base() > 4)
- return(1); /* in sdram */
- return(0); /* running in SRAM or FLASH */
-}
-
-/*************************************************************
- * running_from_internal_boot() - am I a signed NOR image.
- *************************************************************/
-u32 running_from_internal_boot(void)
-{
- u32 v, base;
-
- v = get_sysboot_value() & BIT3;
- base = get_base2();
- /* if running at mask rom flash address and
- * sysboot3 says this was an internal boot
- */
- if ((base == 0x08) && v)
- return(1);
- else
- return(0);
-}
-
-/*************************************************************
- * get_device_type(): tell if GP/HS/EMU/TST
- *************************************************************/
-u32 get_device_type(void)
-{
- int mode;
- mode = __raw_readl(CONTROL_STATUS) & (BIT10|BIT9|BIT8);
- return(mode >>= 8);
-}
diff --git a/board/ti/omap5_uevm/evm.c b/board/ti/omap5_uevm/evm.c
index 46db1bf..90046e8 100644
--- a/board/ti/omap5_uevm/evm.c
+++ b/board/ti/omap5_uevm/evm.c
@@ -71,22 +71,26 @@
void set_muxconf_regs_essential(void)
{
- do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_essential,
+ do_set_mux((*ctrl)->control_padconf_core_base,
+ core_padconf_array_essential,
sizeof(core_padconf_array_essential) /
sizeof(struct pad_conf_entry));
- do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_essential,
+ do_set_mux((*ctrl)->control_padconf_wkup_base,
+ wkup_padconf_array_essential,
sizeof(wkup_padconf_array_essential) /
sizeof(struct pad_conf_entry));
}
void set_muxconf_regs_non_essential(void)
{
- do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_non_essential,
+ do_set_mux((*ctrl)->control_padconf_core_base,
+ core_padconf_array_non_essential,
sizeof(core_padconf_array_non_essential) /
sizeof(struct pad_conf_entry));
- do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_non_essential,
+ do_set_mux((*ctrl)->control_padconf_wkup_base,
+ wkup_padconf_array_non_essential,
sizeof(wkup_padconf_array_non_essential) /
sizeof(struct pad_conf_entry));
}
diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c
index 2bbe392..1da5b35 100644
--- a/board/ti/panda/panda.c
+++ b/board/ti/panda/panda.c
@@ -24,7 +24,7 @@
#include <common.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/mmc_host_def.h>
-#include <asm/arch/clocks.h>
+#include <asm/arch/clock.h>
#include <asm/arch/gpio.h>
#include <asm/gpio.h>
@@ -37,6 +37,11 @@
#endif
#define PANDA_ULPI_PHY_TYPE_GPIO 182
+#define PANDA_BOARD_ID_1_GPIO 101
+#define PANDA_ES_BOARD_ID_1_GPIO 48
+#define PANDA_BOARD_ID_2_GPIO 171
+#define PANDA_ES_BOARD_ID_3_GPIO 3
+#define PANDA_ES_BOARD_ID_4_GPIO 2
DECLARE_GLOBAL_DATA_PTR;
@@ -66,6 +71,73 @@
return 0;
}
+/*
+* Routine: get_board_revision
+* Description: Detect if we are running on a panda revision A1-A6,
+* or an ES panda board. This can be done by reading
+* the level of GPIOs and checking the processor revisions.
+* This should result in:
+* Panda 4430:
+* GPIO171, GPIO101, GPIO182: 0 1 1 => A1-A5
+* GPIO171, GPIO101, GPIO182: 1 0 1 => A6
+* Panda ES:
+* GPIO2, GPIO3, GPIO171, GPIO48, GPIO182: 0 0 0 1 1 => B1/B2
+* GPIO2, GPIO3, GPIO171, GPIO48, GPIO182: 0 0 1 1 1 => B3
+*/
+int get_board_revision(void)
+{
+ int board_id0, board_id1, board_id2;
+ int board_id3, board_id4;
+ int board_id;
+
+ int processor_rev = omap_revision();
+
+ /* Setup the mux for the common board ID pins (gpio 171 and 182) */
+ writew((IEN | M3), (*ctrl)->control_padconf_core_base + UNIPRO_TX0);
+ writew((IEN | M3), (*ctrl)->control_padconf_core_base + FREF_CLK2_OUT);
+
+ board_id0 = gpio_get_value(PANDA_ULPI_PHY_TYPE_GPIO);
+ board_id2 = gpio_get_value(PANDA_BOARD_ID_2_GPIO);
+
+ if ((processor_rev >= OMAP4460_ES1_0 &&
+ processor_rev <= OMAP4460_ES1_1)) {
+ /*
+ * Setup the mux for the ES specific board ID pins (gpio 101,
+ * 2 and 3.
+ */
+ writew((IEN | M3), (*ctrl)->control_padconf_core_base +
+ GPMC_A24);
+ writew((IEN | M3), (*ctrl)->control_padconf_core_base +
+ UNIPRO_RY0);
+ writew((IEN | M3), (*ctrl)->control_padconf_core_base +
+ UNIPRO_RX1);
+
+ board_id1 = gpio_get_value(PANDA_ES_BOARD_ID_1_GPIO);
+ board_id3 = gpio_get_value(PANDA_ES_BOARD_ID_3_GPIO);
+ board_id4 = gpio_get_value(PANDA_ES_BOARD_ID_4_GPIO);
+
+#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+ setenv("board_name", strcat(CONFIG_SYS_BOARD, "-es"));
+#endif
+ board_id = ((board_id4 << 4) | (board_id3 << 3) |
+ (board_id2 << 2) | (board_id1 << 1) | (board_id0));
+ } else {
+ /* Setup the mux for the Ax specific board ID pins (gpio 101) */
+ writew((IEN | M3), (*ctrl)->control_padconf_core_base +
+ FREF_CLK2_OUT);
+
+ board_id1 = gpio_get_value(PANDA_BOARD_ID_1_GPIO);
+ board_id = ((board_id2 << 2) | (board_id1 << 1) | (board_id0));
+
+#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+ if ((board_id >= 0x3) && (processor_rev == OMAP4430_ES2_3))
+ setenv("board_name", strcat(CONFIG_SYS_BOARD, "-a4"));
+#endif
+ }
+
+ return board_id;
+}
+
/**
* @brief misc_init_r - Configure Panda board specific configurations
* such as power configurations, ethernet initialization as phase2 of
@@ -82,11 +154,7 @@
if (omap_revision() == OMAP4430_ES1_0)
return 0;
-#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
- if (omap_revision() >= OMAP4460_ES1_0 ||
- omap_revision() <= OMAP4460_ES1_1)
- setenv("board_name", strcat(CONFIG_SYS_BOARD, "-es"));
-#endif
+ get_board_revision();
gpio_direction_input(PANDA_ULPI_PHY_TYPE_GPIO);
phy_type = gpio_get_value(PANDA_ULPI_PHY_TYPE_GPIO);
@@ -106,7 +174,7 @@
auxclk |= AUXCLK_ENABLE_MASK;
writel(auxclk, &scrm->auxclk3);
- } else {
+ } else {
/* ULPI PHY supplied by auxclk1 derived from PER dpll */
debug("ULPI PHY supplied by auxclk1\n");
@@ -139,47 +207,51 @@
void set_muxconf_regs_essential(void)
{
- do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_essential,
+ do_set_mux((*ctrl)->control_padconf_core_base,
+ core_padconf_array_essential,
sizeof(core_padconf_array_essential) /
sizeof(struct pad_conf_entry));
- do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_essential,
+ do_set_mux((*ctrl)->control_padconf_wkup_base,
+ wkup_padconf_array_essential,
sizeof(wkup_padconf_array_essential) /
sizeof(struct pad_conf_entry));
if (omap_revision() >= OMAP4460_ES1_0)
- do_set_mux(CONTROL_PADCONF_WKUP,
- wkup_padconf_array_essential_4460,
- sizeof(wkup_padconf_array_essential_4460) /
- sizeof(struct pad_conf_entry));
+ do_set_mux((*ctrl)->control_padconf_wkup_base,
+ wkup_padconf_array_essential_4460,
+ sizeof(wkup_padconf_array_essential_4460) /
+ sizeof(struct pad_conf_entry));
}
void set_muxconf_regs_non_essential(void)
{
- do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_non_essential,
+ do_set_mux((*ctrl)->control_padconf_core_base,
+ core_padconf_array_non_essential,
sizeof(core_padconf_array_non_essential) /
sizeof(struct pad_conf_entry));
if (omap_revision() < OMAP4460_ES1_0)
- do_set_mux(CONTROL_PADCONF_CORE,
- core_padconf_array_non_essential_4430,
- sizeof(core_padconf_array_non_essential_4430) /
- sizeof(struct pad_conf_entry));
+ do_set_mux((*ctrl)->control_padconf_core_base,
+ core_padconf_array_non_essential_4430,
+ sizeof(core_padconf_array_non_essential_4430) /
+ sizeof(struct pad_conf_entry));
else
- do_set_mux(CONTROL_PADCONF_CORE,
- core_padconf_array_non_essential_4460,
- sizeof(core_padconf_array_non_essential_4460) /
- sizeof(struct pad_conf_entry));
+ do_set_mux((*ctrl)->control_padconf_core_base,
+ core_padconf_array_non_essential_4460,
+ sizeof(core_padconf_array_non_essential_4460) /
+ sizeof(struct pad_conf_entry));
- do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_non_essential,
+ do_set_mux((*ctrl)->control_padconf_wkup_base,
+ wkup_padconf_array_non_essential,
sizeof(wkup_padconf_array_non_essential) /
sizeof(struct pad_conf_entry));
if (omap_revision() < OMAP4460_ES1_0)
- do_set_mux(CONTROL_PADCONF_WKUP,
- wkup_padconf_array_non_essential_4430,
- sizeof(wkup_padconf_array_non_essential_4430) /
- sizeof(struct pad_conf_entry));
+ do_set_mux((*ctrl)->control_padconf_wkup_base,
+ wkup_padconf_array_non_essential_4430,
+ sizeof(wkup_padconf_array_non_essential_4430) /
+ sizeof(struct pad_conf_entry));
}
#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC)
diff --git a/board/ti/sdp4430/sdp.c b/board/ti/sdp4430/sdp.c
index 4c1a4f7..5dd1ba3 100644
--- a/board/ti/sdp4430/sdp.c
+++ b/board/ti/sdp4430/sdp.c
@@ -72,16 +72,18 @@
void set_muxconf_regs_essential(void)
{
- do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_essential,
+ do_set_mux((*ctrl)->control_padconf_core_base,
+ core_padconf_array_essential,
sizeof(core_padconf_array_essential) /
sizeof(struct pad_conf_entry));
- do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_essential,
+ do_set_mux((*ctrl)->control_padconf_wkup_base,
+ wkup_padconf_array_essential,
sizeof(wkup_padconf_array_essential) /
sizeof(struct pad_conf_entry));
if (omap_revision() >= OMAP4460_ES1_0)
- do_set_mux(CONTROL_PADCONF_WKUP,
+ do_set_mux((*ctrl)->control_padconf_wkup_base,
wkup_padconf_array_essential_4460,
sizeof(wkup_padconf_array_essential_4460) /
sizeof(struct pad_conf_entry));
@@ -89,16 +91,18 @@
void set_muxconf_regs_non_essential(void)
{
- do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_non_essential,
+ do_set_mux((*ctrl)->control_padconf_core_base,
+ core_padconf_array_non_essential,
sizeof(core_padconf_array_non_essential) /
sizeof(struct pad_conf_entry));
- do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_non_essential,
+ do_set_mux((*ctrl)->control_padconf_wkup_base,
+ wkup_padconf_array_non_essential,
sizeof(wkup_padconf_array_non_essential) /
sizeof(struct pad_conf_entry));
if (omap_revision() < OMAP4460_ES1_0) {
- do_set_mux(CONTROL_PADCONF_WKUP,
+ do_set_mux((*ctrl)->control_padconf_wkup_base,
wkup_padconf_array_non_essential_4430,
sizeof(wkup_padconf_array_non_essential_4430) /
sizeof(struct pad_conf_entry));
diff --git a/board/ti/ti814x/evm.c b/board/ti/ti814x/evm.c
index 7adb524..6ad3dd8 100644
--- a/board/ti/ti814x/evm.c
+++ b/board/ti/ti814x/evm.c
@@ -37,49 +37,16 @@
#ifdef CONFIG_SPL_BUILD
static struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE;
-static struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE;
#endif
static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
/* UART Defines */
#ifdef CONFIG_SPL_BUILD
-#define UART_RESET (0x1 << 1)
-#define UART_CLK_RUNNING_MASK 0x1
-#define UART_SMART_IDLE_EN (0x1 << 0x3)
-
-static void rtc32k_enable(void)
-{
- struct rtc_regs *rtc = (struct rtc_regs *)RTC_BASE;
-
- /*
- * Unlock the RTC's registers. For more details please see the
- * RTC_SS section of the TRM. In order to unlock we need to
- * write these specific values (keys) in this order.
- */
- writel(0x83e70b13, &rtc->kick0r);
- writel(0x95a4f1e0, &rtc->kick1r);
-
- /* Enable the RTC 32K OSC by setting bits 3 and 6. */
- writel((1 << 3) | (1 << 6), &rtc->osc);
-}
-
static void uart_enable(void)
{
- u32 regVal;
-
/* UART softreset */
- regVal = readl(&uart_base->uartsyscfg);
- regVal |= UART_RESET;
- writel(regVal, &uart_base->uartsyscfg);
- while ((readl(&uart_base->uartsyssts) &
- UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK)
- ;
-
- /* Disable smart idle */
- regVal = readl(&uart_base->uartsyscfg);
- regVal |= UART_SMART_IDLE_EN;
- writel(regVal, &uart_base->uartsyscfg);
+ uart_soft_reset();
}
static void wdt_disable(void)
@@ -149,6 +116,15 @@
void s_init(void)
{
#ifdef CONFIG_SPL_BUILD
+ /*
+ * Save the boot parameters passed from romcode.
+ * We cannot delay the saving further than this,
+ * to prevent overwrites.
+ */
+#ifdef CONFIG_SPL_BUILD
+ save_omap_boot_params();
+#endif
+
/* WDT1 is already running when the bootloader gets control
* Disable it to avoid "random" resets
*/
diff --git a/board/ttcontrol/vision2/imximage_hynix.cfg b/board/ttcontrol/vision2/imximage_hynix.cfg
index c1de94f..64bddbb 100644
--- a/board/ttcontrol/vision2/imximage_hynix.cfg
+++ b/board/ttcontrol/vision2/imximage_hynix.cfg
@@ -23,7 +23,7 @@
* Foundation Inc. 51 Franklin Street Fifth Floor Boston,
* MA 02110-1301 USA
*
- * Refer docs/README.imxmage for more details about how-to configure
+ * Refer doc/README.imximage for more details about how-to configure
* and create imximage boot image
*
* The syntax is taken as close as possible with the kwbimage
diff --git a/board/vpac270/u-boot-spl.lds b/board/vpac270/u-boot-spl.lds
index 61d1154..1a3ef92 100644
--- a/board/vpac270/u-boot-spl.lds
+++ b/board/vpac270/u-boot-spl.lds
@@ -67,11 +67,6 @@
__rel_dyn_end = .;
}
- .dynsym : {
- __dynsym_start = .;
- *(.dynsym)
- }
-
. = ALIGN(0x800);
_end = .;
@@ -84,6 +79,7 @@
}
/DISCARD/ : { *(.bss*) }
+ /DISCARD/ : { *(.dynsym) }
/DISCARD/ : { *(.dynstr*) }
/DISCARD/ : { *(.dynsym*) }
/DISCARD/ : { *(.dynamic*) }
diff --git a/board/xilinx/microblaze-generic/microblaze-generic.c b/board/xilinx/microblaze-generic/microblaze-generic.c
index befbb3a..2f5f20e 100644
--- a/board/xilinx/microblaze-generic/microblaze-generic.c
+++ b/board/xilinx/microblaze-generic/microblaze-generic.c
@@ -31,12 +31,17 @@
#include <asm/processor.h>
#include <asm/microblaze_intc.h>
#include <asm/asm.h>
+#include <asm/gpio.h>
+
+#ifdef CONFIG_XILINX_GPIO
+static int reset_pin = -1;
+#endif
int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
-#ifdef CONFIG_SYS_GPIO_0
- *((unsigned long *)(CONFIG_SYS_GPIO_0_ADDR)) =
- ++(*((unsigned long *)(CONFIG_SYS_GPIO_0_ADDR)));
+#ifdef CONFIG_XILINX_GPIO
+ if (reset_pin != -1)
+ gpio_direction_output(reset_pin, 1);
#endif
#ifdef CONFIG_XILINX_TB_WATCHDOG
@@ -52,8 +57,10 @@
int gpio_init (void)
{
-#ifdef CONFIG_SYS_GPIO_0
- *((unsigned long *)(CONFIG_SYS_GPIO_0_ADDR)) = 0xFFFFFFFF;
+#ifdef CONFIG_XILINX_GPIO
+ reset_pin = gpio_alloc(CONFIG_SYS_GPIO_0_ADDR, "reset", 1);
+ if (reset_pin != -1)
+ gpio_request(reset_pin, "reset_pin");
#endif
return 0;
}
diff --git a/boards.cfg b/boards.cfg
index db56488..1458289 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -52,7 +52,6 @@
mx35pdk arm arm1136 - freescale mx35
woodburn arm arm1136 - - mx35
woodburn_sd arm arm1136 woodburn - mx35 woodburn_sd:IMX_CONFIG=board/woodburn/imximage.cfg
-omap2420h4 arm arm1136 - ti omap24xx
tnetv107x_evm arm arm1176 tnetv107xevm ti tnetv107x
rpi_b arm arm1176 rpi_b raspberrypi bcm2835
integratorap_cm720t arm arm720t integrator armltd - integratorap:CM720T
@@ -94,6 +93,7 @@
at91sam9g10ek_nandflash arm arm926ejs at91sam9261ek atmel at91 at91sam9261ek:AT91SAM9G10,SYS_USE_NANDFLASH
at91sam9g20ek_dataflash_cs0 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,SYS_USE_DATAFLASH_CS0
at91sam9g20ek_dataflash_cs1 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,SYS_USE_DATAFLASH_CS1
+at91sam9g20ek_mmc arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,SYS_USE_MMC
at91sam9g20ek_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,SYS_USE_NANDFLASH
at91sam9g20ek_2mmc_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,AT91SAM9G20EK_2MMC,SYS_USE_NANDFLASH
at91sam9m10g45ek_nandflash arm arm926ejs at91sam9m10g45ek atmel at91 at91sam9m10g45ek:AT91SAM9M10G45,SYS_USE_NANDFLASH
@@ -106,6 +106,9 @@
at91sam9xeek_dataflash_cs0 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9XE,SYS_USE_DATAFLASH_CS0
at91sam9xeek_dataflash_cs1 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9XE,SYS_USE_DATAFLASH_CS1
at91sam9xeek_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9XE,SYS_USE_NANDFLASH
+at91sam9n12ek_nandflash arm arm926ejs at91sam9n12ek atmel at91 at91sam9n12ek:AT91SAM9N12,SYS_USE_NANDFLASH
+at91sam9n12ek_spiflash arm arm926ejs at91sam9n12ek atmel at91 at91sam9n12ek:AT91SAM9N12,SYS_USE_SPIFLASH
+at91sam9n12ek_mmc arm arm926ejs at91sam9n12ek atmel at91 at91sam9n12ek:AT91SAM9N12,SYS_USE_MMC
snapper9260 arm arm926ejs - bluewater at91 snapper9260:AT91SAM9260
snapper9g20 arm arm926ejs snapper9260 bluewater at91 snapper9260:AT91SAM9G20
vl_ma2sc arm arm926ejs vl_ma2sc BuS at91
@@ -185,6 +188,7 @@
sheevaplug arm arm926ejs - Marvell kirkwood
ib62x0 arm arm926ejs ib62x0 raidsonic kirkwood
dockstar arm arm926ejs - Seagate kirkwood
+goflexhome arm arm926ejs - Seagate kirkwood
tk71 arm arm926ejs tk71 karo kirkwood
devkit3250 arm arm926ejs devkit3250 timll lpc32xx
jadecpu arm arm926ejs jadecpu syteco mb86r0x
@@ -234,7 +238,9 @@
versatileqemu arm arm926ejs versatile armltd versatile versatile:ARCH_VERSATILE_QEMU,ARCH_VERSATILE_PB
integratorap_cm946es arm arm946es integrator armltd - integratorap:CM946ES
integratorcp_cm946es arm arm946es integrator armltd - integratorcp:CM946ES
-ca9x4_ct_vxp arm armv7 vexpress armltd
+vexpress_ca15_tc2 arm armv7 vexpress armltd
+vexpress_ca5x2 arm armv7 vexpress armltd
+vexpress_ca9x4 arm armv7 vexpress armltd
am335x_evm arm armv7 am335x ti am33xx am335x_evm:SERIAL1,CONS_INDEX=1
am335x_evm_spiboot arm armv7 am335x ti am33xx am335x_evm:SERIAL1,CONS_INDEX=1,SPI_BOOT
am335x_evm_uart1 arm armv7 am335x ti am33xx am335x_evm:SERIAL2,CONS_INDEX=2
@@ -245,6 +251,9 @@
am335x_evm_usbspl arm armv7 am335x ti am33xx am335x_evm:SERIAL1,CONS_INDEX=1,SPL_USBETH_SUPPORT
ti814x_evm arm armv7 ti814x ti am33xx
pcm051 arm armv7 pcm051 phytec am33xx pcm051
+sama5d3xek_mmc arm armv7 sama5d3xek atmel at91 sama5d3xek:SAMA5D3,SYS_USE_MMC
+sama5d3xek_nandflash arm armv7 sama5d3xek atmel at91 sama5d3xek:SAMA5D3,SYS_USE_NANDFLASH
+sama5d3xek_spiflash arm armv7 sama5d3xek atmel at91 sama5d3xek:SAMA5D3,SYS_USE_SERIALFLASH
highbank arm armv7 highbank - highbank
m53evk arm armv7 m53evk denx mx5 m53evk:IMX_CONFIG=board/denx/m53evk/imximage.cfg
mx51_efikamx arm armv7 mx51_efikamx genesi mx5 mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKAMX,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_mx.cfg
@@ -319,7 +328,7 @@
ventana arm armv7:arm720t ventana nvidia tegra20
whistler arm armv7:arm720t whistler nvidia tegra20
cardhu arm armv7:arm720t cardhu nvidia tegra30
-beaver arm armv7:arm720t cardhu nvidia tegra30
+beaver arm armv7:arm720t beaver nvidia tegra30
dalmore arm armv7:arm720t dalmore nvidia tegra114
colibri_t20_iris arm armv7:arm720t colibri_t20_iris toradex tegra20
u8500_href arm armv7 u8500 st-ericsson u8500
@@ -341,9 +350,11 @@
scpu arm ixp pdnb3 prodrive - pdnb3:SCPU
balloon3 arm pxa
h2200 arm pxa
+lp8x4x arm pxa lp8x4x icpdas
lubbock arm pxa
palmld arm pxa
palmtc arm pxa
+palmtreo680 arm pxa
polaris arm pxa trizepsiv - - trizepsiv:POLARIS
pxa255_idp arm pxa
trizepsiv arm pxa
@@ -596,9 +607,6 @@
TQM5200S powerpc mpc5xxx tqm5200 tqc - TQM5200:TQM5200_B,TQM5200S
TQM5200S_HIGHBOOT powerpc mpc5xxx tqm5200 tqc - TQM5200:TQM5200_B,TQM5200S,SYS_TEXT_BASE=0xFFF00000
TQM5200_STK100 powerpc mpc5xxx tqm5200 tqc - TQM5200:STK52XX_REV100
-Alaska8220 powerpc mpc8220 alaska
-sorcery powerpc mpc8220
-Yukon8220 powerpc mpc8220 alaska
A3000 powerpc mpc824x a3000
CPC45 powerpc mpc824x cpc45 - - CPC45
CPC45_ROMBOOT powerpc mpc824x cpc45 - - CPC45:BOOT_ROM
@@ -891,6 +899,9 @@
P5020DS_SPIFLASH powerpc mpc85xx corenet_ds freescale - P5020DS:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000
P5020DS_SRIO_PCIE_BOOT powerpc mpc85xx corenet_ds freescale - P5020DS:SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF80000
P5040DS powerpc mpc85xx corenet_ds freescale
+P5040DS_NAND powerpc mpc85xx corenet_ds freescale - P5040DS:RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF80000
+P5040DS_SDCARD powerpc mpc85xx corenet_ds freescale - P5040DS:RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000
+P5040DS_SPIFLASH powerpc mpc85xx corenet_ds freescale - P5040DS:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000
BSC9131RDB_SPIFLASH powerpc mpc85xx bsc9131rdb freescale - BSC9131RDB:BSC9131RDB,SPIFLASH
BSC9132QDS_NOR_DDRCLK100 powerpc mpc85xx bsc9132qds freescale - BSC9132QDS:BSC9132QDS,SYS_CLK_100_DDR_100
BSC9132QDS_NOR_DDRCLK133 powerpc mpc85xx bsc9132qds freescale - BSC9132QDS:BSC9132QDS,SYS_CLK_100_DDR_133
@@ -901,9 +912,12 @@
stxgp3 powerpc mpc85xx stxgp3 stx
stxssa powerpc mpc85xx stxssa stx - stxssa
stxssa_4M powerpc mpc85xx stxssa stx - stxssa:STXSSA_4M
-T4240QDS powerpc mpc85xx t4qds freescale
-T4240QDS_SDCARD powerpc mpc85xx t4qds freescale - T4240QDS:RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000
-T4240QDS_SPIFLASH powerpc mpc85xx t4qds freescale - T4240QDS:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000
+T4240QDS powerpc mpc85xx t4qds freescale - T4240QDS:PPC_T4240
+T4240QDS_SDCARD powerpc mpc85xx t4qds freescale - T4240QDS:PPC_T4240,RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000
+T4240QDS_SPIFLASH powerpc mpc85xx t4qds freescale - T4240QDS:PPC_T4240,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000
+T4160QDS powerpc mpc85xx t4qds freescale - T4240QDS:PPC_T4160
+T4160QDS_SDCARD powerpc mpc85xx t4qds freescale - T4240QDS:PPC_T4160,RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000
+T4160QDS_SPIFLASH powerpc mpc85xx t4qds freescale - T4240QDS:PPC_T4160,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000
B4860QDS powerpc mpc85xx b4860qds freescale - B4860QDS:PPC_B4860
B4860QDS_NAND powerpc mpc85xx b4860qds freescale - B4860QDS:PPC_B4860,RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF80000
B4860QDS_SPIFLASH powerpc mpc85xx b4860qds freescale - B4860QDS:PPC_B4860,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000
diff --git a/common/Makefile b/common/Makefile
index 1cfb132..3ba4316 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -165,6 +165,7 @@
COBJS-$(CONFIG_CMD_SCSI) += cmd_scsi.o
COBJS-$(CONFIG_CMD_SHA1SUM) += cmd_sha1sum.o
COBJS-$(CONFIG_CMD_SETEXPR) += cmd_setexpr.o
+COBJS-$(CONFIG_CMD_SOFTSWITCH) += cmd_softswitch.o
COBJS-$(CONFIG_CMD_SPI) += cmd_spi.o
COBJS-$(CONFIG_CMD_SPIBOOTLDR) += cmd_spibootldr.o
COBJS-$(CONFIG_CMD_STRINGS) += cmd_strings.o
@@ -231,6 +232,8 @@
COBJS-y += console.o
COBJS-y += dlmalloc.o
COBJS-y += image.o
+COBJS-$(CONFIG_OF_LIBFDT) += image-fdt.o
+COBJS-$(CONFIG_FIT) += image-fit.o
COBJS-y += memsize.o
COBJS-y += stdio.o
diff --git a/common/board_f.c b/common/board_f.c
index 32e59fa..81edbdf 100644
--- a/common/board_f.c
+++ b/common/board_f.c
@@ -667,27 +667,6 @@
#if defined(CONFIG_MPC83xx)
bd->bi_immrbar = CONFIG_SYS_IMMR;
#endif
-#if defined(CONFIG_MPC8220)
- bd->bi_mbar_base = CONFIG_SYS_MBAR; /* base of internal registers */
- bd->bi_inpfreq = gd->arch.inp_clk;
- bd->bi_pcifreq = gd->pci_clk;
- bd->bi_vcofreq = gd->arch.vco_clk;
- bd->bi_pevfreq = gd->arch.pev_clk;
- bd->bi_flbfreq = gd->arch.flb_clk;
-
- /* store bootparam to sram (backward compatible), here? */
- {
- u32 *sram = (u32 *) CONFIG_SYS_SRAM_BASE;
-
- *sram++ = gd->ram_size;
- *sram++ = gd->bus_clk;
- *sram++ = gd->arch.inp_clk;
- *sram++ = gd->cpu_clk;
- *sram++ = gd->arch.vco_clk;
- *sram++ = gd->arch.flb_clk;
- *sram++ = 0xb8c3ba11; /* boot signature */
- }
-#endif
return 0;
}
@@ -921,9 +900,6 @@
#if defined(CONFIG_MPC5xxx)
prt_mpc5xxx_clks,
#endif /* CONFIG_MPC5xxx */
-#if defined(CONFIG_MPC8220)
- prt_mpc8220_clks,
-#endif
#if defined(CONFIG_DISPLAY_BOARDINFO)
checkboard, /* display board info */
#endif
diff --git a/common/board_r.c b/common/board_r.c
index f801e41..fd1fd31 100644
--- a/common/board_r.c
+++ b/common/board_r.c
@@ -765,6 +765,7 @@
#endif
initr_barrier,
initr_malloc,
+ bootstage_relocate,
#ifdef CONFIG_ARCH_EARLY_INIT_R
arch_early_init_r,
#endif
diff --git a/common/bootstage.c b/common/bootstage.c
index a1e0939..c5c6996 100644
--- a/common/bootstage.c
+++ b/common/bootstage.c
@@ -30,6 +30,8 @@
#include <common.h>
#include <libfdt.h>
+#include <malloc.h>
+#include <linux/compiler.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -56,6 +58,21 @@
uint32_t magic; /* Unused */
};
+int bootstage_relocate(void)
+{
+ int i;
+
+ /*
+ * Duplicate all strings. They may point to an old location in the
+ * program .text section that can eventually get trashed.
+ */
+ for (i = 0; i < BOOTSTAGE_ID_COUNT; i++)
+ if (record[i].name)
+ record[i].name = strdup(record[i].name);
+
+ return 0;
+}
+
ulong bootstage_add_record(enum bootstage_id id, const char *name,
int flags, ulong mark)
{
@@ -102,6 +119,33 @@
return bootstage_add_record(id, name, flags, timer_get_boot_us());
}
+ulong bootstage_mark_code(const char *file, const char *func, int linenum)
+{
+ char *str, *p;
+ __maybe_unused char *end;
+ int len = 0;
+
+ /* First work out the length we need to allocate */
+ if (linenum != -1)
+ len = 11;
+ if (func)
+ len += strlen(func);
+ if (file)
+ len += strlen(file);
+
+ str = malloc(len + 1);
+ p = str;
+ end = p + len;
+ if (file)
+ p += snprintf(p, end - p, "%s,", file);
+ if (linenum != -1)
+ p += snprintf(p, end - p, "%d", linenum);
+ if (func)
+ p += snprintf(p, end - p, ": %s", func);
+
+ return bootstage_mark_name(BOOTSTAGE_ID_ALLOC, str);
+}
+
uint32_t bootstage_start(enum bootstage_id id, const char *name)
{
struct bootstage_record *rec = &record[id];
diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c
index 85279d5..17dc961 100644
--- a/common/cmd_bdinfo.c
+++ b/common/cmd_bdinfo.c
@@ -84,6 +84,10 @@
}
#if defined(CONFIG_PPC)
+void __weak board_detail(void)
+{
+ /* Please define boot_detail() for your platform */
+}
int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
@@ -130,13 +134,6 @@
#endif
print_mhz("busfreq", bd->bi_busfreq);
#endif /* CONFIG_405GP, CONFIG_405CR, CONFIG_405EP, CONFIG_XILINX_405, CONFIG_440EP CONFIG_440GR */
-#if defined(CONFIG_MPC8220)
- print_mhz("inpfreq", bd->bi_inpfreq);
- print_mhz("flbfreq", bd->bi_flbfreq);
- print_mhz("pcifreq", bd->bi_pcifreq);
- print_mhz("vcofreq", bd->bi_vcofreq);
- print_mhz("pevfreq", bd->bi_pevfreq);
-#endif
#ifdef CONFIG_ENABLE_36BIT_PHYS
#ifdef CONFIG_PHYS_64BIT
@@ -169,6 +166,7 @@
printf("IP addr = %s\n", getenv("ipaddr"));
printf("baudrate = %6u bps\n", bd->bi_baudrate);
print_num("relocaddr", gd->relocaddr);
+ board_detail();
return 0;
}
diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
index 7438469..15f4599 100644
--- a/common/cmd_bootm.c
+++ b/common/cmd_bootm.c
@@ -36,6 +36,7 @@
#include <lmb.h>
#include <linux/ctype.h>
#include <asm/byteorder.h>
+#include <asm/io.h>
#include <linux/compiler.h>
#if defined(CONFIG_CMD_USB)
@@ -97,7 +98,7 @@
static int fit_check_kernel(const void *fit, int os_noffset, int verify);
#endif
-static void *boot_get_kernel(cmd_tbl_t *cmdtp, int flag, int argc,
+static const void *boot_get_kernel(cmd_tbl_t *cmdtp, int flag, int argc,
char * const argv[], bootm_headers_t *images,
ulong *os_data, ulong *os_len);
@@ -203,8 +204,8 @@
static int bootm_start(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
- void *os_hdr;
- int ret;
+ const void *os_hdr;
+ int ret;
memset((void *)&images, 0, sizeof(images));
images.verify = getenv_yesno("verify");
@@ -275,7 +276,7 @@
#if defined(CONFIG_FIT)
} else if (images.fit_uname_os) {
ret = fit_image_get_entry(images.fit_hdr_os,
- images.fit_noffset_os, &images.ep);
+ images.fit_noffset_os, &images.ep);
if (ret) {
puts("Can't get entry point property!\n");
return 1;
@@ -815,7 +816,7 @@
if (verify) {
puts(" Verifying Hash Integrity ... ");
- if (!fit_image_check_hashes(fit, os_noffset)) {
+ if (!fit_image_verify(fit, os_noffset)) {
puts("Bad Data Hash\n");
bootstage_error(BOOTSTAGE_ID_FIT_CHECK_HASH);
return 0;
@@ -855,14 +856,15 @@
* pointer to image header if valid image was found, plus kernel start
* address and length, otherwise NULL
*/
-static void *boot_get_kernel(cmd_tbl_t *cmdtp, int flag, int argc,
+static const void *boot_get_kernel(cmd_tbl_t *cmdtp, int flag, int argc,
char * const argv[], bootm_headers_t *images, ulong *os_data,
ulong *os_len)
{
image_header_t *hdr;
ulong img_addr;
+ const void *buf;
#if defined(CONFIG_FIT)
- void *fit_hdr;
+ const void *fit_hdr;
const char *fit_uname_config = NULL;
const char *fit_uname_kernel = NULL;
const void *data;
@@ -898,7 +900,8 @@
/* check image type, for FIT images get FIT kernel node */
*os_data = *os_len = 0;
- switch (genimg_get_format((void *)img_addr)) {
+ buf = map_sysmem(img_addr, 0);
+ switch (genimg_get_format(buf)) {
case IMAGE_FORMAT_LEGACY:
printf("## Booting kernel from Legacy Image at %08lx ...\n",
img_addr);
@@ -943,7 +946,7 @@
break;
#if defined(CONFIG_FIT)
case IMAGE_FORMAT_FIT:
- fit_hdr = (void *)img_addr;
+ fit_hdr = buf;
printf("## Booting kernel from FIT Image at %08lx ...\n",
img_addr);
@@ -1020,7 +1023,7 @@
*os_len = len;
*os_data = (ulong)data;
- images->fit_hdr_os = fit_hdr;
+ images->fit_hdr_os = (void *)fit_hdr;
images->fit_uname_os = fit_uname_kernel;
images->fit_noffset_os = os_noffset;
break;
@@ -1034,7 +1037,7 @@
debug(" kernel data at 0x%08lx, len = 0x%08lx (%ld)\n",
*os_data, *os_len, *os_len);
- return (void *)img_addr;
+ return buf;
}
#ifdef CONFIG_SYS_LONGHELP
@@ -1169,7 +1172,7 @@
fit_print_contents(hdr);
- if (!fit_all_image_check_hashes(hdr)) {
+ if (!fit_all_image_verify(hdr)) {
puts("Bad hash in FIT image!\n");
return 1;
}
@@ -1420,9 +1423,14 @@
/* helper routines */
/*******************************************************************/
#if defined(CONFIG_SILENT_CONSOLE) && !defined(CONFIG_SILENT_U_BOOT_ONLY)
+
+#define CONSOLE_ARG "console="
+#define CONSOLE_ARG_LEN (sizeof(CONSOLE_ARG) - 1)
+
static void fixup_silent_linux(void)
{
- char buf[256], *start, *end;
+ char *buf;
+ const char *env_val;
char *cmdline = getenv("bootargs");
/* Only fix cmdline when requested */
@@ -1430,25 +1438,37 @@
return;
debug("before silent fix-up: %s\n", cmdline);
- if (cmdline) {
- start = strstr(cmdline, "console=");
- if (start) {
- end = strchr(start, ' ');
- strncpy(buf, cmdline, (start - cmdline + 8));
- if (end)
- strcpy(buf + (start - cmdline + 8), end);
- else
- buf[start - cmdline + 8] = '\0';
- } else {
- strcpy(buf, cmdline);
- strcat(buf, " console=");
+ if (cmdline && (cmdline[0] != '\0')) {
+ char *start = strstr(cmdline, CONSOLE_ARG);
+
+ /* Allocate space for maximum possible new command line */
+ buf = malloc(strlen(cmdline) + 1 + CONSOLE_ARG_LEN + 1);
+ if (!buf) {
+ debug("%s: out of memory\n", __func__);
+ return;
}
+
+ if (start) {
+ char *end = strchr(start, ' ');
+ int num_start_bytes = start - cmdline + CONSOLE_ARG_LEN;
+
+ strncpy(buf, cmdline, num_start_bytes);
+ if (end)
+ strcpy(buf + num_start_bytes, end);
+ else
+ buf[num_start_bytes] = '\0';
+ } else {
+ sprintf(buf, "%s %s", cmdline, CONSOLE_ARG);
+ }
+ env_val = buf;
} else {
- strcpy(buf, "console=");
+ buf = NULL;
+ env_val = CONSOLE_ARG;
}
- setenv("bootargs", buf);
- debug("after silent fix-up: %s\n", buf);
+ setenv("bootargs", env_val);
+ debug("after silent fix-up: %s\n", env_val);
+ free(buf);
}
#endif /* CONFIG_SILENT_CONSOLE */
diff --git a/common/cmd_fpga.c b/common/cmd_fpga.c
index 5e1d037..3cd1b13 100644
--- a/common/cmd_fpga.c
+++ b/common/cmd_fpga.c
@@ -210,8 +210,8 @@
}
/* verify integrity */
- if (!fit_image_check_hashes(fit_hdr, noffset)) {
- puts("Bad Data Hash\n");
+ if (!fit_image_verify(fit_hdr, noffset)) {
+ puts ("Bad Data Hash\n");
return 1;
}
diff --git a/common/cmd_mem.c b/common/cmd_mem.c
index 64dd76a..6df00b1 100644
--- a/common/cmd_mem.c
+++ b/common/cmd_mem.c
@@ -445,7 +445,7 @@
#endif
bytes = size * count;
- buf = map_sysmem(addr, bytes);
+ buf = map_sysmem(dest, bytes);
src = map_sysmem(addr, bytes);
while (count-- > 0) {
if (size == 4)
diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c
index 7d82469..5f1ed43 100644
--- a/common/cmd_mmc.c
+++ b/common/cmd_mmc.c
@@ -147,6 +147,36 @@
"- display info of the current MMC device"
);
+#ifdef CONFIG_SUPPORT_EMMC_BOOT
+static int boot_part_access(struct mmc *mmc, u8 ack, u8 part_num, u8 access)
+{
+ int err;
+ err = mmc_boot_part_access(mmc, ack, part_num, access);
+
+ if ((err == 0) && (access != 0)) {
+ printf("\t\t\t!!!Notice!!!\n");
+
+ printf("!You must close EMMC boot Partition");
+ printf("after all images are written\n");
+
+ printf("!EMMC boot partition has continuity");
+ printf("at image writing time.\n");
+
+ printf("!So, do not close the boot partition");
+ printf("before all images are written.\n");
+ return 0;
+ } else if ((err == 0) && (access == 0))
+ return 0;
+ else if ((err != 0) && (access != 0)) {
+ printf("EMMC boot partition-%d OPEN Failed.\n", part_num);
+ return 1;
+ } else {
+ printf("EMMC boot partition-%d CLOSE Failed.\n", part_num);
+ return 1;
+ }
+}
+#endif
+
static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
enum mmc_state state;
@@ -258,8 +288,74 @@
curr_device, mmc->part_num);
return 0;
- }
+#ifdef CONFIG_SUPPORT_EMMC_BOOT
+ } else if ((strcmp(argv[1], "open") == 0) ||
+ (strcmp(argv[1], "close") == 0)) {
+ int dev;
+ struct mmc *mmc;
+ u8 part_num, access = 0;
+ if (argc == 4) {
+ dev = simple_strtoul(argv[2], NULL, 10);
+ part_num = simple_strtoul(argv[3], NULL, 10);
+ } else {
+ return CMD_RET_USAGE;
+ }
+
+ mmc = find_mmc_device(dev);
+ if (!mmc) {
+ printf("no mmc device at slot %x\n", dev);
+ return 1;
+ }
+
+ if (IS_SD(mmc)) {
+ printf("SD device cannot be opened/closed\n");
+ return 1;
+ }
+
+ if ((part_num <= 0) || (part_num > MMC_NUM_BOOT_PARTITION)) {
+ printf("Invalid boot partition number:\n");
+ printf("Boot partition number cannot be <= 0\n");
+ printf("EMMC44 supports only 2 boot partitions\n");
+ return 1;
+ }
+
+ if (strcmp(argv[1], "open") == 0)
+ access = part_num; /* enable R/W access to boot part*/
+ else
+ access = 0; /* No access to boot partition */
+
+ /* acknowledge to be sent during boot operation */
+ return boot_part_access(mmc, 1, part_num, access);
+
+ } else if (strcmp(argv[1], "bootpart") == 0) {
+ int dev;
+ dev = simple_strtoul(argv[2], NULL, 10);
+
+ u32 bootsize = simple_strtoul(argv[3], NULL, 10);
+ u32 rpmbsize = simple_strtoul(argv[4], NULL, 10);
+ struct mmc *mmc = find_mmc_device(dev);
+ if (!mmc) {
+ printf("no mmc device at slot %x\n", dev);
+ return 1;
+ }
+
+ if (IS_SD(mmc)) {
+ printf("It is not a EMMC device\n");
+ return 1;
+ }
+
+ if (0 == mmc_boot_partition_size_change(mmc,
+ bootsize, rpmbsize)) {
+ printf("EMMC boot partition Size %d MB\n", bootsize);
+ printf("EMMC RPMB partition Size %d MB\n", rpmbsize);
+ return 0;
+ } else {
+ printf("EMMC boot partition Size change Failed.\n");
+ return 1;
+ }
+#endif /* CONFIG_SUPPORT_EMMC_BOOT */
+ }
state = MMC_INVALID;
if (argc == 5 && strcmp(argv[1], "read") == 0)
state = MMC_READ;
@@ -334,5 +430,14 @@
"mmc rescan\n"
"mmc part - lists available partition on current mmc device\n"
"mmc dev [dev] [part] - show or set current mmc device [partition]\n"
- "mmc list - lists available devices");
+ "mmc list - lists available devices\n"
+#ifdef CONFIG_SUPPORT_EMMC_BOOT
+ "mmc open <dev> <boot_partition>\n"
+ " - Enable boot_part for booting and enable R/W access of boot_part\n"
+ "mmc close <dev> <boot_partition>\n"
+ " - Enable boot_part for booting and disable access to boot_part\n"
+ "mmc bootpart <device num> <boot part size MB> <RPMB part size MB>\n"
+ " - change sizes of boot and RPMB partions of specified device\n"
#endif
+ );
+#endif /* !CONFIG_GENERIC_MMC */
diff --git a/common/cmd_nvedit.c b/common/cmd_nvedit.c
index f8dc38e..2478c95 100644
--- a/common/cmd_nvedit.c
+++ b/common/cmd_nvedit.c
@@ -314,7 +314,7 @@
/**
* Set an environment variable to an integer value
*
- * @param varname Environmet variable to set
+ * @param varname Environment variable to set
* @param value Value to set it to
* @return 0 if ok, 1 on error
*/
@@ -329,7 +329,7 @@
/**
* Set an environment variable to an value in hex
*
- * @param varname Environmet variable to set
+ * @param varname Environment variable to set
* @param value Value to set it to
* @return 0 if ok, 1 on error
*/
diff --git a/common/cmd_softswitch.c b/common/cmd_softswitch.c
new file mode 100644
index 0000000..f75d926
--- /dev/null
+++ b/common/cmd_softswitch.c
@@ -0,0 +1,41 @@
+/*
+ * cmd_softswitch.c - set the softswitch for bf60x
+ *
+ * Copyright (c) 2012 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/blackfin.h>
+#include <asm/soft_switch.h>
+
+int do_softswitch(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ int switchaddr, value, pin, port;
+
+ if (argc != 5)
+ return CMD_RET_USAGE;
+
+ if (strcmp(argv[2], "GPA") == 0)
+ port = IO_PORT_A;
+ else if (strcmp(argv[2], "GPB") == 0)
+ port = IO_PORT_B;
+ else
+ return CMD_RET_USAGE;
+
+ switchaddr = simple_strtoul(argv[1], NULL, 16);
+ pin = simple_strtoul(argv[3], NULL, 16);
+ value = simple_strtoul(argv[4], NULL, 16);
+
+ config_switch_bit(switchaddr, port, (1 << pin), IO_PORT_OUTPUT, value);
+
+ return 0;
+}
+
+U_BOOT_CMD(
+ softswitch_output, 5, 1, do_softswitch,
+ "switchaddr GPA/GPB pin_offset value",
+ ""
+);
diff --git a/common/cmd_source.c b/common/cmd_source.c
index f0d7f52..a440614 100644
--- a/common/cmd_source.c
+++ b/common/cmd_source.c
@@ -127,7 +127,7 @@
/* verify integrity */
if (verify) {
- if (!fit_image_check_hashes (fit_hdr, noffset)) {
+ if (!fit_image_verify(fit_hdr, noffset)) {
puts ("Bad Data Hash\n");
return 1;
}
diff --git a/common/cmd_usb.c b/common/cmd_usb.c
index dacdc2d..70e803b 100644
--- a/common/cmd_usb.c
+++ b/common/cmd_usb.c
@@ -269,14 +269,42 @@
printf("\n");
}
+static struct usb_device *usb_find_device(int devnum)
+{
+ struct usb_device *dev;
+ int d;
+
+ for (d = 0; d < USB_MAX_DEVICE; d++) {
+ dev = usb_get_dev_index(d);
+ if (dev == NULL)
+ return NULL;
+ if (dev->devnum == devnum)
+ return dev;
+ }
+
+ return NULL;
+}
+
static inline char *portspeed(int speed)
{
- if (speed == USB_SPEED_HIGH)
- return "480 Mb/s";
- else if (speed == USB_SPEED_LOW)
- return "1.5 Mb/s";
- else
- return "12 Mb/s";
+ char *speed_str;
+
+ switch (speed) {
+ case USB_SPEED_SUPER:
+ speed_str = "5 Gb/s";
+ break;
+ case USB_SPEED_HIGH:
+ speed_str = "480 Mb/s";
+ break;
+ case USB_SPEED_LOW:
+ speed_str = "1.5 Mb/s";
+ break;
+ default:
+ speed_str = "12 Mb/s";
+ break;
+ }
+
+ return speed_str;
}
/* shows the device tree recursively */
@@ -348,6 +376,66 @@
usb_show_tree_graph(dev, &preamble[0]);
}
+static int usb_test(struct usb_device *dev, int port, char* arg)
+{
+ int mode;
+
+ if (port > dev->maxchild) {
+ printf("Device is no hub or does not have %d ports.\n", port);
+ return 1;
+ }
+
+ switch (arg[0]) {
+ case 'J':
+ case 'j':
+ printf("Setting Test_J mode");
+ mode = USB_TEST_MODE_J;
+ break;
+ case 'K':
+ case 'k':
+ printf("Setting Test_K mode");
+ mode = USB_TEST_MODE_K;
+ break;
+ case 'S':
+ case 's':
+ printf("Setting Test_SE0_NAK mode");
+ mode = USB_TEST_MODE_SE0_NAK;
+ break;
+ case 'P':
+ case 'p':
+ printf("Setting Test_Packet mode");
+ mode = USB_TEST_MODE_PACKET;
+ break;
+ case 'F':
+ case 'f':
+ printf("Setting Test_Force_Enable mode");
+ mode = USB_TEST_MODE_FORCE_ENABLE;
+ break;
+ default:
+ printf("Unrecognized test mode: %s\nAvailable modes: "
+ "J, K, S[E0_NAK], P[acket], F[orce_Enable]\n", arg);
+ return 1;
+ }
+
+ if (port)
+ printf(" on downstream facing port %d...\n", port);
+ else
+ printf(" on upstream facing port...\n");
+
+ if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0), USB_REQ_SET_FEATURE,
+ port ? USB_RT_PORT : USB_RECIP_DEVICE,
+ port ? USB_PORT_FEAT_TEST : USB_FEAT_TEST,
+ (mode << 8) | port,
+ NULL, 0, USB_CNTL_TIMEOUT) == -1) {
+ printf("Error during SET_FEATURE.\n");
+ return 1;
+ } else {
+ printf("Test mode successfully set. Use 'usb start' "
+ "to return to normal operation.\n");
+ return 0;
+ }
+}
+
/******************************************************************************
* usb boot command intepreter. Derived from diskboot
@@ -441,17 +529,9 @@
}
return 0;
} else {
- int d;
-
- i = simple_strtoul(argv[2], NULL, 16);
+ i = simple_strtoul(argv[2], NULL, 10);
printf("config for device %d\n", i);
- for (d = 0; d < USB_MAX_DEVICE; d++) {
- dev = usb_get_dev_index(d);
- if (dev == NULL)
- break;
- if (dev->devnum == i)
- break;
- }
+ dev = usb_find_device(i);
if (dev == NULL) {
printf("*** No device available ***\n");
return 0;
@@ -462,6 +542,18 @@
}
return 0;
}
+ if (strncmp(argv[1], "test", 4) == 0) {
+ if (argc < 5)
+ return CMD_RET_USAGE;
+ i = simple_strtoul(argv[2], NULL, 10);
+ dev = usb_find_device(i);
+ if (dev == NULL) {
+ printf("Device %d does not exist.\n", i);
+ return 1;
+ }
+ i = simple_strtoul(argv[3], NULL, 10);
+ return usb_test(dev, i, argv[4]);
+ }
#ifdef CONFIG_USB_STORAGE
if (strncmp(argv[1], "stor", 4) == 0)
return usb_stor_info();
@@ -571,7 +663,6 @@
return CMD_RET_USAGE;
}
-#ifdef CONFIG_USB_STORAGE
U_BOOT_CMD(
usb, 5, 1, do_usb,
"USB sub-system",
@@ -580,30 +671,26 @@
"usb stop [f] - stop USB [f]=force stop\n"
"usb tree - show USB device tree\n"
"usb info [dev] - show available USB devices\n"
+ "usb test [dev] [port] [mode] - set USB 2.0 test mode\n"
+ " (specify port 0 to indicate the device's upstream port)\n"
+ " Available modes: J, K, S[E0_NAK], P[acket], F[orce_Enable]\n"
+#ifdef CONFIG_USB_STORAGE
"usb storage - show details of USB storage devices\n"
"usb dev [dev] - show or set current USB storage device\n"
"usb part [dev] - print partition table of one or all USB storage"
- " devices\n"
+ " devices\n"
"usb read addr blk# cnt - read `cnt' blocks starting at block `blk#'\n"
" to memory address `addr'\n"
"usb write addr blk# cnt - write `cnt' blocks starting at block `blk#'\n"
" from memory address `addr'"
+#endif /* CONFIG_USB_STORAGE */
);
+#ifdef CONFIG_USB_STORAGE
U_BOOT_CMD(
usbboot, 3, 1, do_usbboot,
"boot from USB device",
"loadAddr dev:part"
);
-
-#else
-U_BOOT_CMD(
- usb, 5, 1, do_usb,
- "USB sub-system",
- "start - start (scan) USB controller\n"
- "usb reset - reset (rescan) USB controller\n"
- "usb tree - show USB device tree\n"
- "usb info [dev] - show available USB devices"
-);
-#endif
+#endif /* CONFIG_USB_STORAGE */
diff --git a/common/cmd_ximg.c b/common/cmd_ximg.c
index ea0a26e..270e803 100644
--- a/common/cmd_ximg.c
+++ b/common/cmd_ximg.c
@@ -58,7 +58,9 @@
const void *fit_data;
size_t fit_len;
#endif
+#ifdef CONFIG_GZIP
uint unc_len = CONFIG_SYS_XIMG_LEN;
+#endif
uint8_t comp;
verify = getenv_yesno("verify");
@@ -160,7 +162,7 @@
/* verify integrity */
if (verify) {
- if (!fit_image_check_hashes(fit_hdr, noffset)) {
+ if (!fit_image_verify(fit_hdr, noffset)) {
puts("Bad Data Hash\n");
return 1;
}
diff --git a/common/fdt_support.c b/common/fdt_support.c
index 812acb4..416100e 100644
--- a/common/fdt_support.c
+++ b/common/fdt_support.c
@@ -387,7 +387,11 @@
}
}
+#ifdef CONFIG_NR_DRAM_BANKS
+#define MEMORY_BANKS_MAX CONFIG_NR_DRAM_BANKS
+#else
#define MEMORY_BANKS_MAX 4
+#endif
int fdt_fixup_memory_banks(void *blob, u64 start[], u64 size[], int banks)
{
int err, nodeoffset;
diff --git a/common/hash.c b/common/hash.c
index c9ac33e..fe19b73 100644
--- a/common/hash.c
+++ b/common/hash.c
@@ -30,6 +30,7 @@
#include <sha1.h>
#include <sha256.h>
#include <asm/io.h>
+#include <asm/errno.h>
/*
* These are the hash algorithms we support. Chips which support accelerated
@@ -238,6 +239,28 @@
printf("%02x", output[i]);
}
+int hash_block(const char *algo_name, const void *data, unsigned int len,
+ uint8_t *output, int *output_size)
+{
+ struct hash_algo *algo;
+
+ algo = find_hash_algo(algo_name);
+ if (!algo) {
+ debug("Unknown hash algorithm '%s'\n", algo_name);
+ return -EPROTONOSUPPORT;
+ }
+ if (output_size && *output_size < algo->digest_size) {
+ debug("Output buffer size %d too small (need %d bytes)",
+ *output_size, algo->digest_size);
+ return -ENOSPC;
+ }
+ if (output_size)
+ *output_size = algo->digest_size;
+ algo->hash_func_ws(data, len, output, algo->chunk_size);
+
+ return 0;
+}
+
int hash_command(const char *algo_name, int flags, cmd_tbl_t *cmdtp, int flag,
int argc, char * const argv[])
{
diff --git a/common/image-fdt.c b/common/image-fdt.c
new file mode 100644
index 0000000..158c9cf
--- /dev/null
+++ b/common/image-fdt.c
@@ -0,0 +1,653 @@
+/*
+ * Copyright (c) 2013, Google Inc.
+ *
+ * (C) Copyright 2008 Semihalf
+ *
+ * (C) Copyright 2000-2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <fdt_support.h>
+#include <errno.h>
+#include <image.h>
+#include <libfdt.h>
+#include <asm/io.h>
+
+#ifndef CONFIG_SYS_FDT_PAD
+#define CONFIG_SYS_FDT_PAD 0x3000
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static void fdt_error(const char *msg)
+{
+ puts("ERROR: ");
+ puts(msg);
+ puts(" - must RESET the board to recover.\n");
+}
+
+static const image_header_t *image_get_fdt(ulong fdt_addr)
+{
+ const image_header_t *fdt_hdr = map_sysmem(fdt_addr, 0);
+
+ image_print_contents(fdt_hdr);
+
+ puts(" Verifying Checksum ... ");
+ if (!image_check_hcrc(fdt_hdr)) {
+ fdt_error("fdt header checksum invalid");
+ return NULL;
+ }
+
+ if (!image_check_dcrc(fdt_hdr)) {
+ fdt_error("fdt checksum invalid");
+ return NULL;
+ }
+ puts("OK\n");
+
+ if (!image_check_type(fdt_hdr, IH_TYPE_FLATDT)) {
+ fdt_error("uImage is not a fdt");
+ return NULL;
+ }
+ if (image_get_comp(fdt_hdr) != IH_COMP_NONE) {
+ fdt_error("uImage is compressed");
+ return NULL;
+ }
+ if (fdt_check_header((char *)image_get_data(fdt_hdr)) != 0) {
+ fdt_error("uImage data is not a fdt");
+ return NULL;
+ }
+ return fdt_hdr;
+}
+
+/**
+ * boot_fdt_add_mem_rsv_regions - Mark the memreserve sections as unusable
+ * @lmb: pointer to lmb handle, will be used for memory mgmt
+ * @fdt_blob: pointer to fdt blob base address
+ *
+ * Adds the memreserve regions in the dtb to the lmb block. Adding the
+ * memreserve regions prevents u-boot from using them to store the initrd
+ * or the fdt blob.
+ */
+void boot_fdt_add_mem_rsv_regions(struct lmb *lmb, void *fdt_blob)
+{
+ uint64_t addr, size;
+ int i, total;
+
+ if (fdt_check_header(fdt_blob) != 0)
+ return;
+
+ total = fdt_num_mem_rsv(fdt_blob);
+ for (i = 0; i < total; i++) {
+ if (fdt_get_mem_rsv(fdt_blob, i, &addr, &size) != 0)
+ continue;
+ printf(" reserving fdt memory region: addr=%llx size=%llx\n",
+ (unsigned long long)addr, (unsigned long long)size);
+ lmb_reserve(lmb, addr, size);
+ }
+}
+
+/**
+ * boot_relocate_fdt - relocate flat device tree
+ * @lmb: pointer to lmb handle, will be used for memory mgmt
+ * @of_flat_tree: pointer to a char* variable, will hold fdt start address
+ * @of_size: pointer to a ulong variable, will hold fdt length
+ *
+ * boot_relocate_fdt() allocates a region of memory within the bootmap and
+ * relocates the of_flat_tree into that region, even if the fdt is already in
+ * the bootmap. It also expands the size of the fdt by CONFIG_SYS_FDT_PAD
+ * bytes.
+ *
+ * of_flat_tree and of_size are set to final (after relocation) values
+ *
+ * returns:
+ * 0 - success
+ * 1 - failure
+ */
+int boot_relocate_fdt(struct lmb *lmb, char **of_flat_tree, ulong *of_size)
+{
+ void *fdt_blob = *of_flat_tree;
+ void *of_start = NULL;
+ char *fdt_high;
+ ulong of_len = 0;
+ int err;
+ int disable_relocation = 0;
+
+ /* nothing to do */
+ if (*of_size == 0)
+ return 0;
+
+ if (fdt_check_header(fdt_blob) != 0) {
+ fdt_error("image is not a fdt");
+ goto error;
+ }
+
+ /* position on a 4K boundary before the alloc_current */
+ /* Pad the FDT by a specified amount */
+ of_len = *of_size + CONFIG_SYS_FDT_PAD;
+
+ /* If fdt_high is set use it to select the relocation address */
+ fdt_high = getenv("fdt_high");
+ if (fdt_high) {
+ void *desired_addr = (void *)simple_strtoul(fdt_high, NULL, 16);
+
+ if (((ulong) desired_addr) == ~0UL) {
+ /* All ones means use fdt in place */
+ of_start = fdt_blob;
+ lmb_reserve(lmb, (ulong)of_start, of_len);
+ disable_relocation = 1;
+ } else if (desired_addr) {
+ of_start =
+ (void *)(ulong) lmb_alloc_base(lmb, of_len, 0x1000,
+ (ulong)desired_addr);
+ if (of_start == NULL) {
+ puts("Failed using fdt_high value for Device Tree");
+ goto error;
+ }
+ } else {
+ of_start =
+ (void *)(ulong) lmb_alloc(lmb, of_len, 0x1000);
+ }
+ } else {
+ of_start =
+ (void *)(ulong) lmb_alloc_base(lmb, of_len, 0x1000,
+ getenv_bootm_mapsize()
+ + getenv_bootm_low());
+ }
+
+ if (of_start == NULL) {
+ puts("device tree - allocation error\n");
+ goto error;
+ }
+
+ if (disable_relocation) {
+ /*
+ * We assume there is space after the existing fdt to use
+ * for padding
+ */
+ fdt_set_totalsize(of_start, of_len);
+ printf(" Using Device Tree in place at %p, end %p\n",
+ of_start, of_start + of_len - 1);
+ } else {
+ debug("## device tree at %p ... %p (len=%ld [0x%lX])\n",
+ fdt_blob, fdt_blob + *of_size - 1, of_len, of_len);
+
+ printf(" Loading Device Tree to %p, end %p ... ",
+ of_start, of_start + of_len - 1);
+
+ err = fdt_open_into(fdt_blob, of_start, of_len);
+ if (err != 0) {
+ fdt_error("fdt move failed");
+ goto error;
+ }
+ puts("OK\n");
+ }
+
+ *of_flat_tree = of_start;
+ *of_size = of_len;
+
+ set_working_fdt_addr(*of_flat_tree);
+ return 0;
+
+error:
+ return 1;
+}
+
+#if defined(CONFIG_FIT)
+/**
+ * fit_check_fdt - verify FIT format FDT subimage
+ * @fit_hdr: pointer to the FIT header
+ * fdt_noffset: FDT subimage node offset within FIT image
+ * @verify: data CRC verification flag
+ *
+ * fit_check_fdt() verifies integrity of the FDT subimage and from
+ * specified FIT image.
+ *
+ * returns:
+ * 1, on success
+ * 0, on failure
+ */
+static int fit_check_fdt(const void *fit, int fdt_noffset, int verify)
+{
+ fit_image_print(fit, fdt_noffset, " ");
+
+ if (verify) {
+ puts(" Verifying Hash Integrity ... ");
+ if (!fit_image_verify(fit, fdt_noffset)) {
+ fdt_error("Bad Data Hash");
+ return 0;
+ }
+ puts("OK\n");
+ }
+
+ if (!fit_image_check_type(fit, fdt_noffset, IH_TYPE_FLATDT)) {
+ fdt_error("Not a FDT image");
+ return 0;
+ }
+
+ if (!fit_image_check_comp(fit, fdt_noffset, IH_COMP_NONE)) {
+ fdt_error("FDT image is compressed");
+ return 0;
+ }
+
+ return 1;
+}
+#endif
+
+/**
+ * boot_get_fdt - main fdt handling routine
+ * @argc: command argument count
+ * @argv: command argument list
+ * @images: pointer to the bootm images structure
+ * @of_flat_tree: pointer to a char* variable, will hold fdt start address
+ * @of_size: pointer to a ulong variable, will hold fdt length
+ *
+ * boot_get_fdt() is responsible for finding a valid flat device tree image.
+ * Curently supported are the following ramdisk sources:
+ * - multicomponent kernel/ramdisk image,
+ * - commandline provided address of decicated ramdisk image.
+ *
+ * returns:
+ * 0, if fdt image was found and valid, or skipped
+ * of_flat_tree and of_size are set to fdt start address and length if
+ * fdt image is found and valid
+ *
+ * 1, if fdt image is found but corrupted
+ * of_flat_tree and of_size are set to 0 if no fdt exists
+ */
+int boot_get_fdt(int flag, int argc, char * const argv[],
+ bootm_headers_t *images, char **of_flat_tree, ulong *of_size)
+{
+ const image_header_t *fdt_hdr;
+ ulong fdt_addr;
+ char *fdt_blob = NULL;
+ ulong image_start, image_data, image_end;
+ ulong load_start, load_end;
+ void *buf;
+#if defined(CONFIG_FIT)
+ void *fit_hdr;
+ const char *fit_uname_config = NULL;
+ const char *fit_uname_fdt = NULL;
+ ulong default_addr;
+ int cfg_noffset;
+ int fdt_noffset;
+ const void *data;
+ size_t size;
+#endif
+
+ *of_flat_tree = NULL;
+ *of_size = 0;
+
+ if (argc > 3 || genimg_has_config(images)) {
+#if defined(CONFIG_FIT)
+ if (argc > 3) {
+ /*
+ * If the FDT blob comes from the FIT image and the
+ * FIT image address is omitted in the command line
+ * argument, try to use ramdisk or os FIT image
+ * address or default load address.
+ */
+ if (images->fit_uname_rd)
+ default_addr = (ulong)images->fit_hdr_rd;
+ else if (images->fit_uname_os)
+ default_addr = (ulong)images->fit_hdr_os;
+ else
+ default_addr = load_addr;
+
+ if (fit_parse_conf(argv[3], default_addr,
+ &fdt_addr, &fit_uname_config)) {
+ debug("* fdt: config '%s' from image at 0x%08lx\n",
+ fit_uname_config, fdt_addr);
+ } else if (fit_parse_subimage(argv[3], default_addr,
+ &fdt_addr, &fit_uname_fdt)) {
+ debug("* fdt: subimage '%s' from image at 0x%08lx\n",
+ fit_uname_fdt, fdt_addr);
+ } else
+#endif
+ {
+ fdt_addr = simple_strtoul(argv[3], NULL, 16);
+ debug("* fdt: cmdline image address = 0x%08lx\n",
+ fdt_addr);
+ }
+#if defined(CONFIG_FIT)
+ } else {
+ /* use FIT configuration provided in first bootm
+ * command argument
+ */
+ fdt_addr = map_to_sysmem(images->fit_hdr_os);
+ fit_uname_config = images->fit_uname_cfg;
+ debug("* fdt: using config '%s' from image at 0x%08lx\n",
+ fit_uname_config, fdt_addr);
+
+ /*
+ * Check whether configuration has FDT blob defined,
+ * if not quit silently.
+ */
+ fit_hdr = images->fit_hdr_os;
+ cfg_noffset = fit_conf_get_node(fit_hdr,
+ fit_uname_config);
+ if (cfg_noffset < 0) {
+ debug("* fdt: no such config\n");
+ return 0;
+ }
+
+ fdt_noffset = fit_conf_get_fdt_node(fit_hdr,
+ cfg_noffset);
+ if (fdt_noffset < 0) {
+ debug("* fdt: no fdt in config\n");
+ return 0;
+ }
+ }
+#endif
+
+ debug("## Checking for 'FDT'/'FDT Image' at %08lx\n",
+ fdt_addr);
+
+ /* copy from dataflash if needed */
+ fdt_addr = genimg_get_image(fdt_addr);
+
+ /*
+ * Check if there is an FDT image at the
+ * address provided in the second bootm argument
+ * check image type, for FIT images get a FIT node.
+ */
+ buf = map_sysmem(fdt_addr, 0);
+ switch (genimg_get_format(buf)) {
+ case IMAGE_FORMAT_LEGACY:
+ /* verify fdt_addr points to a valid image header */
+ printf("## Flattened Device Tree from Legacy Image at %08lx\n",
+ fdt_addr);
+ fdt_hdr = image_get_fdt(fdt_addr);
+ if (!fdt_hdr)
+ goto error;
+
+ /*
+ * move image data to the load address,
+ * make sure we don't overwrite initial image
+ */
+ image_start = (ulong)fdt_hdr;
+ image_data = (ulong)image_get_data(fdt_hdr);
+ image_end = image_get_image_end(fdt_hdr);
+
+ load_start = image_get_load(fdt_hdr);
+ load_end = load_start + image_get_data_size(fdt_hdr);
+
+ if (load_start == image_start ||
+ load_start == image_data) {
+ fdt_blob = (char *)image_data;
+ break;
+ }
+
+ if ((load_start < image_end) &&
+ (load_end > image_start)) {
+ fdt_error("fdt overwritten");
+ goto error;
+ }
+
+ debug(" Loading FDT from 0x%08lx to 0x%08lx\n",
+ image_data, load_start);
+
+ memmove((void *)load_start,
+ (void *)image_data,
+ image_get_data_size(fdt_hdr));
+
+ fdt_blob = (char *)load_start;
+ break;
+ case IMAGE_FORMAT_FIT:
+ /*
+ * This case will catch both: new uImage format
+ * (libfdt based) and raw FDT blob (also libfdt
+ * based).
+ */
+#if defined(CONFIG_FIT)
+ /* check FDT blob vs FIT blob */
+ if (fit_check_format(buf)) {
+ /*
+ * FIT image
+ */
+ fit_hdr = buf;
+ printf("## Flattened Device Tree from FIT Image at %08lx\n",
+ fdt_addr);
+
+ if (!fit_uname_fdt) {
+ /*
+ * no FDT blob image node unit name,
+ * try to get config node first. If
+ * config unit node name is NULL
+ * fit_conf_get_node() will try to
+ * find default config node
+ */
+ cfg_noffset = fit_conf_get_node(fit_hdr,
+ fit_uname_config);
+
+ if (cfg_noffset < 0) {
+ fdt_error("Could not find configuration node\n");
+ goto error;
+ }
+
+ fit_uname_config = fdt_get_name(fit_hdr,
+ cfg_noffset, NULL);
+ printf(" Using '%s' configuration\n",
+ fit_uname_config);
+
+ fdt_noffset = fit_conf_get_fdt_node(
+ fit_hdr,
+ cfg_noffset);
+ fit_uname_fdt = fit_get_name(fit_hdr,
+ fdt_noffset, NULL);
+ } else {
+ /*
+ * get FDT component image node
+ * offset
+ */
+ fdt_noffset = fit_image_get_node(
+ fit_hdr,
+ fit_uname_fdt);
+ }
+ if (fdt_noffset < 0) {
+ fdt_error("Could not find subimage node\n");
+ goto error;
+ }
+
+ printf(" Trying '%s' FDT blob subimage\n",
+ fit_uname_fdt);
+
+ if (!fit_check_fdt(fit_hdr, fdt_noffset,
+ images->verify))
+ goto error;
+
+ /* get ramdisk image data address and length */
+ if (fit_image_get_data(fit_hdr, fdt_noffset,
+ &data, &size)) {
+ fdt_error("Could not find FDT subimage data");
+ goto error;
+ }
+
+ /*
+ * verify that image data is a proper FDT
+ * blob
+ */
+ if (fdt_check_header((char *)data) != 0) {
+ fdt_error("Subimage data is not a FTD");
+ goto error;
+ }
+
+ /*
+ * move image data to the load address,
+ * make sure we don't overwrite initial image
+ */
+ image_start = (ulong)fit_hdr;
+ image_end = fit_get_end(fit_hdr);
+
+ if (fit_image_get_load(fit_hdr, fdt_noffset,
+ &load_start) == 0) {
+ load_end = load_start + size;
+
+ if ((load_start < image_end) &&
+ (load_end > image_start)) {
+ fdt_error("FDT overwritten");
+ goto error;
+ }
+
+ printf(" Loading FDT from 0x%08lx to 0x%08lx\n",
+ (ulong)data, load_start);
+
+ memmove((void *)load_start,
+ (void *)data, size);
+
+ fdt_blob = (char *)load_start;
+ } else {
+ fdt_blob = (char *)data;
+ }
+
+ images->fit_hdr_fdt = fit_hdr;
+ images->fit_uname_fdt = fit_uname_fdt;
+ images->fit_noffset_fdt = fdt_noffset;
+ break;
+ } else
+#endif
+ {
+ /*
+ * FDT blob
+ */
+ fdt_blob = buf;
+ debug("* fdt: raw FDT blob\n");
+ printf("## Flattened Device Tree blob at %08lx\n",
+ (long)fdt_addr);
+ }
+ break;
+ default:
+ puts("ERROR: Did not find a cmdline Flattened Device Tree\n");
+ goto error;
+ }
+
+ printf(" Booting using the fdt blob at 0x%p\n", fdt_blob);
+
+ } else if (images->legacy_hdr_valid &&
+ image_check_type(&images->legacy_hdr_os_copy,
+ IH_TYPE_MULTI)) {
+ ulong fdt_data, fdt_len;
+
+ /*
+ * Now check if we have a legacy multi-component image,
+ * get second entry data start address and len.
+ */
+ printf("## Flattened Device Tree from multi component Image at %08lX\n",
+ (ulong)images->legacy_hdr_os);
+
+ image_multi_getimg(images->legacy_hdr_os, 2, &fdt_data,
+ &fdt_len);
+ if (fdt_len) {
+ fdt_blob = (char *)fdt_data;
+ printf(" Booting using the fdt at 0x%p\n", fdt_blob);
+
+ if (fdt_check_header(fdt_blob) != 0) {
+ fdt_error("image is not a fdt");
+ goto error;
+ }
+
+ if (fdt_totalsize(fdt_blob) != fdt_len) {
+ fdt_error("fdt size != image size");
+ goto error;
+ }
+ } else {
+ debug("## No Flattened Device Tree\n");
+ return 0;
+ }
+ } else {
+ debug("## No Flattened Device Tree\n");
+ return 0;
+ }
+
+ *of_flat_tree = fdt_blob;
+ *of_size = fdt_totalsize(fdt_blob);
+ debug(" of_flat_tree at 0x%08lx size 0x%08lx\n",
+ (ulong)*of_flat_tree, *of_size);
+
+ return 0;
+
+error:
+ *of_flat_tree = NULL;
+ *of_size = 0;
+ return 1;
+}
+
+/*
+ * Verify the device tree.
+ *
+ * This function is called after all device tree fix-ups have been enacted,
+ * so that the final device tree can be verified. The definition of "verified"
+ * is up to the specific implementation. However, it generally means that the
+ * addresses of some of the devices in the device tree are compared with the
+ * actual addresses at which U-Boot has placed them.
+ *
+ * Returns 1 on success, 0 on failure. If 0 is returned, U-boot will halt the
+ * boot process.
+ */
+__weak int ft_verify_fdt(void *fdt)
+{
+ return 1;
+}
+
+__weak int arch_fixup_memory_node(void *blob)
+{
+ return 0;
+}
+
+int image_setup_libfdt(bootm_headers_t *images, void *blob,
+ int of_size, struct lmb *lmb)
+{
+ ulong *initrd_start = &images->initrd_start;
+ ulong *initrd_end = &images->initrd_end;
+ int ret;
+
+ if (fdt_chosen(blob, 1) < 0) {
+ puts("ERROR: /chosen node create failed");
+ puts(" - must RESET the board to recover.\n");
+ return -1;
+ }
+ arch_fixup_memory_node(blob);
+ if (IMAAGE_OF_BOARD_SETUP)
+ ft_board_setup(blob, gd->bd);
+ fdt_fixup_ethernet(blob);
+
+ /* Delete the old LMB reservation */
+ lmb_free(lmb, (phys_addr_t)(u32)(uintptr_t)blob,
+ (phys_size_t)fdt_totalsize(blob));
+
+ ret = fdt_resize(blob);
+ if (ret < 0)
+ return ret;
+ of_size = ret;
+
+ if (*initrd_start && *initrd_end) {
+ of_size += FDT_RAMDISK_OVERHEAD;
+ fdt_set_totalsize(blob, of_size);
+ }
+ /* Create a new LMB reservation */
+ lmb_reserve(lmb, (ulong)blob, of_size);
+
+ fdt_initrd(blob, *initrd_start, *initrd_end, 1);
+ if (!ft_verify_fdt(blob))
+ return -1;
+
+ return 0;
+}
diff --git a/common/image-fit.c b/common/image-fit.c
new file mode 100644
index 0000000..254feec
--- /dev/null
+++ b/common/image-fit.c
@@ -0,0 +1,1492 @@
+/*
+ * Copyright (c) 2013, Google Inc.
+ *
+ * (C) Copyright 2008 Semihalf
+ *
+ * (C) Copyright 2000-2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifdef USE_HOSTCC
+#include "mkimage.h"
+#include <image.h>
+#include <time.h>
+#else
+#include <common.h>
+#endif /* !USE_HOSTCC*/
+
+#include <bootstage.h>
+#include <sha1.h>
+#include <u-boot/crc.h>
+#include <u-boot/md5.h>
+
+/*****************************************************************************/
+/* New uImage format routines */
+/*****************************************************************************/
+#ifndef USE_HOSTCC
+static int fit_parse_spec(const char *spec, char sepc, ulong addr_curr,
+ ulong *addr, const char **name)
+{
+ const char *sep;
+
+ *addr = addr_curr;
+ *name = NULL;
+
+ sep = strchr(spec, sepc);
+ if (sep) {
+ if (sep - spec > 0)
+ *addr = simple_strtoul(spec, NULL, 16);
+
+ *name = sep + 1;
+ return 1;
+ }
+
+ return 0;
+}
+
+/**
+ * fit_parse_conf - parse FIT configuration spec
+ * @spec: input string, containing configuration spec
+ * @add_curr: current image address (to be used as a possible default)
+ * @addr: pointer to a ulong variable, will hold FIT image address of a given
+ * configuration
+ * @conf_name double pointer to a char, will hold pointer to a configuration
+ * unit name
+ *
+ * fit_parse_conf() expects configuration spec in the for of [<addr>]#<conf>,
+ * where <addr> is a FIT image address that contains configuration
+ * with a <conf> unit name.
+ *
+ * Address part is optional, and if omitted default add_curr will
+ * be used instead.
+ *
+ * returns:
+ * 1 if spec is a valid configuration string,
+ * addr and conf_name are set accordingly
+ * 0 otherwise
+ */
+int fit_parse_conf(const char *spec, ulong addr_curr,
+ ulong *addr, const char **conf_name)
+{
+ return fit_parse_spec(spec, '#', addr_curr, addr, conf_name);
+}
+
+/**
+ * fit_parse_subimage - parse FIT subimage spec
+ * @spec: input string, containing subimage spec
+ * @add_curr: current image address (to be used as a possible default)
+ * @addr: pointer to a ulong variable, will hold FIT image address of a given
+ * subimage
+ * @image_name: double pointer to a char, will hold pointer to a subimage name
+ *
+ * fit_parse_subimage() expects subimage spec in the for of
+ * [<addr>]:<subimage>, where <addr> is a FIT image address that contains
+ * subimage with a <subimg> unit name.
+ *
+ * Address part is optional, and if omitted default add_curr will
+ * be used instead.
+ *
+ * returns:
+ * 1 if spec is a valid subimage string,
+ * addr and image_name are set accordingly
+ * 0 otherwise
+ */
+int fit_parse_subimage(const char *spec, ulong addr_curr,
+ ulong *addr, const char **image_name)
+{
+ return fit_parse_spec(spec, ':', addr_curr, addr, image_name);
+}
+#endif /* !USE_HOSTCC */
+
+static void fit_get_debug(const void *fit, int noffset,
+ char *prop_name, int err)
+{
+ debug("Can't get '%s' property from FIT 0x%08lx, node: offset %d, name %s (%s)\n",
+ prop_name, (ulong)fit, noffset, fit_get_name(fit, noffset, NULL),
+ fdt_strerror(err));
+}
+
+#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_FIT_SPL_PRINT)
+/**
+ * fit_print_contents - prints out the contents of the FIT format image
+ * @fit: pointer to the FIT format image header
+ * @p: pointer to prefix string
+ *
+ * fit_print_contents() formats a multi line FIT image contents description.
+ * The routine prints out FIT image properties (root node level) follwed by
+ * the details of each component image.
+ *
+ * returns:
+ * no returned results
+ */
+void fit_print_contents(const void *fit)
+{
+ char *desc;
+ char *uname;
+ int images_noffset;
+ int confs_noffset;
+ int noffset;
+ int ndepth;
+ int count = 0;
+ int ret;
+ const char *p;
+ time_t timestamp;
+
+ /* Indent string is defined in header image.h */
+ p = IMAGE_INDENT_STRING;
+
+ /* Root node properties */
+ ret = fit_get_desc(fit, 0, &desc);
+ printf("%sFIT description: ", p);
+ if (ret)
+ printf("unavailable\n");
+ else
+ printf("%s\n", desc);
+
+ if (IMAGE_ENABLE_TIMESTAMP) {
+ ret = fit_get_timestamp(fit, 0, ×tamp);
+ printf("%sCreated: ", p);
+ if (ret)
+ printf("unavailable\n");
+ else
+ genimg_print_time(timestamp);
+ }
+
+ /* Find images parent node offset */
+ images_noffset = fdt_path_offset(fit, FIT_IMAGES_PATH);
+ if (images_noffset < 0) {
+ printf("Can't find images parent node '%s' (%s)\n",
+ FIT_IMAGES_PATH, fdt_strerror(images_noffset));
+ return;
+ }
+
+ /* Process its subnodes, print out component images details */
+ for (ndepth = 0, count = 0,
+ noffset = fdt_next_node(fit, images_noffset, &ndepth);
+ (noffset >= 0) && (ndepth > 0);
+ noffset = fdt_next_node(fit, noffset, &ndepth)) {
+ if (ndepth == 1) {
+ /*
+ * Direct child node of the images parent node,
+ * i.e. component image node.
+ */
+ printf("%s Image %u (%s)\n", p, count++,
+ fit_get_name(fit, noffset, NULL));
+
+ fit_image_print(fit, noffset, p);
+ }
+ }
+
+ /* Find configurations parent node offset */
+ confs_noffset = fdt_path_offset(fit, FIT_CONFS_PATH);
+ if (confs_noffset < 0) {
+ debug("Can't get configurations parent node '%s' (%s)\n",
+ FIT_CONFS_PATH, fdt_strerror(confs_noffset));
+ return;
+ }
+
+ /* get default configuration unit name from default property */
+ uname = (char *)fdt_getprop(fit, noffset, FIT_DEFAULT_PROP, NULL);
+ if (uname)
+ printf("%s Default Configuration: '%s'\n", p, uname);
+
+ /* Process its subnodes, print out configurations details */
+ for (ndepth = 0, count = 0,
+ noffset = fdt_next_node(fit, confs_noffset, &ndepth);
+ (noffset >= 0) && (ndepth > 0);
+ noffset = fdt_next_node(fit, noffset, &ndepth)) {
+ if (ndepth == 1) {
+ /*
+ * Direct child node of the configurations parent node,
+ * i.e. configuration node.
+ */
+ printf("%s Configuration %u (%s)\n", p, count++,
+ fit_get_name(fit, noffset, NULL));
+
+ fit_conf_print(fit, noffset, p);
+ }
+ }
+}
+
+/**
+ * fit_image_print_data() - prints out the hash node details
+ * @fit: pointer to the FIT format image header
+ * @noffset: offset of the hash node
+ * @p: pointer to prefix string
+ *
+ * fit_image_print_data() lists properies for the processed hash node
+ *
+ * returns:
+ * no returned results
+ */
+static void fit_image_print_data(const void *fit, int noffset, const char *p)
+{
+ char *algo;
+ uint8_t *value;
+ int value_len;
+ int i, ret;
+
+ /*
+ * Check subnode name, must be equal to "hash".
+ * Multiple hash nodes require unique unit node
+ * names, e.g. hash@1, hash@2, etc.
+ */
+ if (strncmp(fit_get_name(fit, noffset, NULL),
+ FIT_HASH_NODENAME,
+ strlen(FIT_HASH_NODENAME)) != 0)
+ return;
+
+ debug("%s Hash node: '%s'\n", p,
+ fit_get_name(fit, noffset, NULL));
+
+ printf("%s Hash algo: ", p);
+ if (fit_image_hash_get_algo(fit, noffset, &algo)) {
+ printf("invalid/unsupported\n");
+ return;
+ }
+ printf("%s\n", algo);
+
+ ret = fit_image_hash_get_value(fit, noffset, &value,
+ &value_len);
+ printf("%s Hash value: ", p);
+ if (ret) {
+ printf("unavailable\n");
+ } else {
+ for (i = 0; i < value_len; i++)
+ printf("%02x", value[i]);
+ printf("\n");
+ }
+
+ debug("%s Hash len: %d\n", p, value_len);
+}
+
+/**
+ * fit_image_print_verification_data() - prints out the hash/signature details
+ * @fit: pointer to the FIT format image header
+ * @noffset: offset of the hash or signature node
+ * @p: pointer to prefix string
+ *
+ * This lists properies for the processed hash node
+ *
+ * returns:
+ * no returned results
+ */
+static void fit_image_print_verification_data(const void *fit, int noffset,
+ const char *p)
+{
+ const char *name;
+
+ /*
+ * Check subnode name, must be equal to "hash" or "signature".
+ * Multiple hash/signature nodes require unique unit node
+ * names, e.g. hash@1, hash@2, signature@1, signature@2, etc.
+ */
+ name = fit_get_name(fit, noffset, NULL);
+ if (!strncmp(name, FIT_HASH_NODENAME, strlen(FIT_HASH_NODENAME)))
+ fit_image_print_data(fit, noffset, p);
+}
+
+/**
+ * fit_image_print - prints out the FIT component image details
+ * @fit: pointer to the FIT format image header
+ * @image_noffset: offset of the component image node
+ * @p: pointer to prefix string
+ *
+ * fit_image_print() lists all mandatory properies for the processed component
+ * image. If present, hash nodes are printed out as well. Load
+ * address for images of type firmware is also printed out. Since the load
+ * address is not mandatory for firmware images, it will be output as
+ * "unavailable" when not present.
+ *
+ * returns:
+ * no returned results
+ */
+void fit_image_print(const void *fit, int image_noffset, const char *p)
+{
+ char *desc;
+ uint8_t type, arch, os, comp;
+ size_t size;
+ ulong load, entry;
+ const void *data;
+ int noffset;
+ int ndepth;
+ int ret;
+
+ /* Mandatory properties */
+ ret = fit_get_desc(fit, image_noffset, &desc);
+ printf("%s Description: ", p);
+ if (ret)
+ printf("unavailable\n");
+ else
+ printf("%s\n", desc);
+
+ fit_image_get_type(fit, image_noffset, &type);
+ printf("%s Type: %s\n", p, genimg_get_type_name(type));
+
+ fit_image_get_comp(fit, image_noffset, &comp);
+ printf("%s Compression: %s\n", p, genimg_get_comp_name(comp));
+
+ ret = fit_image_get_data(fit, image_noffset, &data, &size);
+
+#ifndef USE_HOSTCC
+ printf("%s Data Start: ", p);
+ if (ret)
+ printf("unavailable\n");
+ else
+ printf("0x%08lx\n", (ulong)data);
+#endif
+
+ printf("%s Data Size: ", p);
+ if (ret)
+ printf("unavailable\n");
+ else
+ genimg_print_size(size);
+
+ /* Remaining, type dependent properties */
+ if ((type == IH_TYPE_KERNEL) || (type == IH_TYPE_STANDALONE) ||
+ (type == IH_TYPE_RAMDISK) || (type == IH_TYPE_FIRMWARE) ||
+ (type == IH_TYPE_FLATDT)) {
+ fit_image_get_arch(fit, image_noffset, &arch);
+ printf("%s Architecture: %s\n", p, genimg_get_arch_name(arch));
+ }
+
+ if ((type == IH_TYPE_KERNEL) || (type == IH_TYPE_RAMDISK)) {
+ fit_image_get_os(fit, image_noffset, &os);
+ printf("%s OS: %s\n", p, genimg_get_os_name(os));
+ }
+
+ if ((type == IH_TYPE_KERNEL) || (type == IH_TYPE_STANDALONE) ||
+ (type == IH_TYPE_FIRMWARE) || (type == IH_TYPE_RAMDISK)) {
+ ret = fit_image_get_load(fit, image_noffset, &load);
+ printf("%s Load Address: ", p);
+ if (ret)
+ printf("unavailable\n");
+ else
+ printf("0x%08lx\n", load);
+ }
+
+ if ((type == IH_TYPE_KERNEL) || (type == IH_TYPE_STANDALONE) ||
+ (type == IH_TYPE_RAMDISK)) {
+ fit_image_get_entry(fit, image_noffset, &entry);
+ printf("%s Entry Point: ", p);
+ if (ret)
+ printf("unavailable\n");
+ else
+ printf("0x%08lx\n", entry);
+ }
+
+ /* Process all hash subnodes of the component image node */
+ for (ndepth = 0, noffset = fdt_next_node(fit, image_noffset, &ndepth);
+ (noffset >= 0) && (ndepth > 0);
+ noffset = fdt_next_node(fit, noffset, &ndepth)) {
+ if (ndepth == 1) {
+ /* Direct child node of the component image node */
+ fit_image_print_verification_data(fit, noffset, p);
+ }
+ }
+}
+#endif
+
+/**
+ * fit_get_desc - get node description property
+ * @fit: pointer to the FIT format image header
+ * @noffset: node offset
+ * @desc: double pointer to the char, will hold pointer to the descrption
+ *
+ * fit_get_desc() reads description property from a given node, if
+ * description is found pointer to it is returened in third call argument.
+ *
+ * returns:
+ * 0, on success
+ * -1, on failure
+ */
+int fit_get_desc(const void *fit, int noffset, char **desc)
+{
+ int len;
+
+ *desc = (char *)fdt_getprop(fit, noffset, FIT_DESC_PROP, &len);
+ if (*desc == NULL) {
+ fit_get_debug(fit, noffset, FIT_DESC_PROP, len);
+ return -1;
+ }
+
+ return 0;
+}
+
+/**
+ * fit_get_timestamp - get node timestamp property
+ * @fit: pointer to the FIT format image header
+ * @noffset: node offset
+ * @timestamp: pointer to the time_t, will hold read timestamp
+ *
+ * fit_get_timestamp() reads timestamp poperty from given node, if timestamp
+ * is found and has a correct size its value is retured in third call
+ * argument.
+ *
+ * returns:
+ * 0, on success
+ * -1, on property read failure
+ * -2, on wrong timestamp size
+ */
+int fit_get_timestamp(const void *fit, int noffset, time_t *timestamp)
+{
+ int len;
+ const void *data;
+
+ data = fdt_getprop(fit, noffset, FIT_TIMESTAMP_PROP, &len);
+ if (data == NULL) {
+ fit_get_debug(fit, noffset, FIT_TIMESTAMP_PROP, len);
+ return -1;
+ }
+ if (len != sizeof(uint32_t)) {
+ debug("FIT timestamp with incorrect size of (%u)\n", len);
+ return -2;
+ }
+
+ *timestamp = uimage_to_cpu(*((uint32_t *)data));
+ return 0;
+}
+
+/**
+ * fit_image_get_node - get node offset for component image of a given unit name
+ * @fit: pointer to the FIT format image header
+ * @image_uname: component image node unit name
+ *
+ * fit_image_get_node() finds a component image (withing the '/images'
+ * node) of a provided unit name. If image is found its node offset is
+ * returned to the caller.
+ *
+ * returns:
+ * image node offset when found (>=0)
+ * negative number on failure (FDT_ERR_* code)
+ */
+int fit_image_get_node(const void *fit, const char *image_uname)
+{
+ int noffset, images_noffset;
+
+ images_noffset = fdt_path_offset(fit, FIT_IMAGES_PATH);
+ if (images_noffset < 0) {
+ debug("Can't find images parent node '%s' (%s)\n",
+ FIT_IMAGES_PATH, fdt_strerror(images_noffset));
+ return images_noffset;
+ }
+
+ noffset = fdt_subnode_offset(fit, images_noffset, image_uname);
+ if (noffset < 0) {
+ debug("Can't get node offset for image unit name: '%s' (%s)\n",
+ image_uname, fdt_strerror(noffset));
+ }
+
+ return noffset;
+}
+
+/**
+ * fit_image_get_os - get os id for a given component image node
+ * @fit: pointer to the FIT format image header
+ * @noffset: component image node offset
+ * @os: pointer to the uint8_t, will hold os numeric id
+ *
+ * fit_image_get_os() finds os property in a given component image node.
+ * If the property is found, its (string) value is translated to the numeric
+ * id which is returned to the caller.
+ *
+ * returns:
+ * 0, on success
+ * -1, on failure
+ */
+int fit_image_get_os(const void *fit, int noffset, uint8_t *os)
+{
+ int len;
+ const void *data;
+
+ /* Get OS name from property data */
+ data = fdt_getprop(fit, noffset, FIT_OS_PROP, &len);
+ if (data == NULL) {
+ fit_get_debug(fit, noffset, FIT_OS_PROP, len);
+ *os = -1;
+ return -1;
+ }
+
+ /* Translate OS name to id */
+ *os = genimg_get_os_id(data);
+ return 0;
+}
+
+/**
+ * fit_image_get_arch - get arch id for a given component image node
+ * @fit: pointer to the FIT format image header
+ * @noffset: component image node offset
+ * @arch: pointer to the uint8_t, will hold arch numeric id
+ *
+ * fit_image_get_arch() finds arch property in a given component image node.
+ * If the property is found, its (string) value is translated to the numeric
+ * id which is returned to the caller.
+ *
+ * returns:
+ * 0, on success
+ * -1, on failure
+ */
+int fit_image_get_arch(const void *fit, int noffset, uint8_t *arch)
+{
+ int len;
+ const void *data;
+
+ /* Get architecture name from property data */
+ data = fdt_getprop(fit, noffset, FIT_ARCH_PROP, &len);
+ if (data == NULL) {
+ fit_get_debug(fit, noffset, FIT_ARCH_PROP, len);
+ *arch = -1;
+ return -1;
+ }
+
+ /* Translate architecture name to id */
+ *arch = genimg_get_arch_id(data);
+ return 0;
+}
+
+/**
+ * fit_image_get_type - get type id for a given component image node
+ * @fit: pointer to the FIT format image header
+ * @noffset: component image node offset
+ * @type: pointer to the uint8_t, will hold type numeric id
+ *
+ * fit_image_get_type() finds type property in a given component image node.
+ * If the property is found, its (string) value is translated to the numeric
+ * id which is returned to the caller.
+ *
+ * returns:
+ * 0, on success
+ * -1, on failure
+ */
+int fit_image_get_type(const void *fit, int noffset, uint8_t *type)
+{
+ int len;
+ const void *data;
+
+ /* Get image type name from property data */
+ data = fdt_getprop(fit, noffset, FIT_TYPE_PROP, &len);
+ if (data == NULL) {
+ fit_get_debug(fit, noffset, FIT_TYPE_PROP, len);
+ *type = -1;
+ return -1;
+ }
+
+ /* Translate image type name to id */
+ *type = genimg_get_type_id(data);
+ return 0;
+}
+
+/**
+ * fit_image_get_comp - get comp id for a given component image node
+ * @fit: pointer to the FIT format image header
+ * @noffset: component image node offset
+ * @comp: pointer to the uint8_t, will hold comp numeric id
+ *
+ * fit_image_get_comp() finds comp property in a given component image node.
+ * If the property is found, its (string) value is translated to the numeric
+ * id which is returned to the caller.
+ *
+ * returns:
+ * 0, on success
+ * -1, on failure
+ */
+int fit_image_get_comp(const void *fit, int noffset, uint8_t *comp)
+{
+ int len;
+ const void *data;
+
+ /* Get compression name from property data */
+ data = fdt_getprop(fit, noffset, FIT_COMP_PROP, &len);
+ if (data == NULL) {
+ fit_get_debug(fit, noffset, FIT_COMP_PROP, len);
+ *comp = -1;
+ return -1;
+ }
+
+ /* Translate compression name to id */
+ *comp = genimg_get_comp_id(data);
+ return 0;
+}
+
+/**
+ * fit_image_get_load() - get load addr property for given component image node
+ * @fit: pointer to the FIT format image header
+ * @noffset: component image node offset
+ * @load: pointer to the uint32_t, will hold load address
+ *
+ * fit_image_get_load() finds load address property in a given component
+ * image node. If the property is found, its value is returned to the caller.
+ *
+ * returns:
+ * 0, on success
+ * -1, on failure
+ */
+int fit_image_get_load(const void *fit, int noffset, ulong *load)
+{
+ int len;
+ const uint32_t *data;
+
+ data = fdt_getprop(fit, noffset, FIT_LOAD_PROP, &len);
+ if (data == NULL) {
+ fit_get_debug(fit, noffset, FIT_LOAD_PROP, len);
+ return -1;
+ }
+
+ *load = uimage_to_cpu(*data);
+ return 0;
+}
+
+/**
+ * fit_image_get_entry() - get entry point address property
+ * @fit: pointer to the FIT format image header
+ * @noffset: component image node offset
+ * @entry: pointer to the uint32_t, will hold entry point address
+ *
+ * This gets the entry point address property for a given component image
+ * node.
+ *
+ * fit_image_get_entry() finds entry point address property in a given
+ * component image node. If the property is found, its value is returned
+ * to the caller.
+ *
+ * returns:
+ * 0, on success
+ * -1, on failure
+ */
+int fit_image_get_entry(const void *fit, int noffset, ulong *entry)
+{
+ int len;
+ const uint32_t *data;
+
+ data = fdt_getprop(fit, noffset, FIT_ENTRY_PROP, &len);
+ if (data == NULL) {
+ fit_get_debug(fit, noffset, FIT_ENTRY_PROP, len);
+ return -1;
+ }
+
+ *entry = uimage_to_cpu(*data);
+ return 0;
+}
+
+/**
+ * fit_image_get_data - get data property and its size for a given component image node
+ * @fit: pointer to the FIT format image header
+ * @noffset: component image node offset
+ * @data: double pointer to void, will hold data property's data address
+ * @size: pointer to size_t, will hold data property's data size
+ *
+ * fit_image_get_data() finds data property in a given component image node.
+ * If the property is found its data start address and size are returned to
+ * the caller.
+ *
+ * returns:
+ * 0, on success
+ * -1, on failure
+ */
+int fit_image_get_data(const void *fit, int noffset,
+ const void **data, size_t *size)
+{
+ int len;
+
+ *data = fdt_getprop(fit, noffset, FIT_DATA_PROP, &len);
+ if (*data == NULL) {
+ fit_get_debug(fit, noffset, FIT_DATA_PROP, len);
+ *size = 0;
+ return -1;
+ }
+
+ *size = len;
+ return 0;
+}
+
+/**
+ * fit_image_hash_get_algo - get hash algorithm name
+ * @fit: pointer to the FIT format image header
+ * @noffset: hash node offset
+ * @algo: double pointer to char, will hold pointer to the algorithm name
+ *
+ * fit_image_hash_get_algo() finds hash algorithm property in a given hash node.
+ * If the property is found its data start address is returned to the caller.
+ *
+ * returns:
+ * 0, on success
+ * -1, on failure
+ */
+int fit_image_hash_get_algo(const void *fit, int noffset, char **algo)
+{
+ int len;
+
+ *algo = (char *)fdt_getprop(fit, noffset, FIT_ALGO_PROP, &len);
+ if (*algo == NULL) {
+ fit_get_debug(fit, noffset, FIT_ALGO_PROP, len);
+ return -1;
+ }
+
+ return 0;
+}
+
+/**
+ * fit_image_hash_get_value - get hash value and length
+ * @fit: pointer to the FIT format image header
+ * @noffset: hash node offset
+ * @value: double pointer to uint8_t, will hold address of a hash value data
+ * @value_len: pointer to an int, will hold hash data length
+ *
+ * fit_image_hash_get_value() finds hash value property in a given hash node.
+ * If the property is found its data start address and size are returned to
+ * the caller.
+ *
+ * returns:
+ * 0, on success
+ * -1, on failure
+ */
+int fit_image_hash_get_value(const void *fit, int noffset, uint8_t **value,
+ int *value_len)
+{
+ int len;
+
+ *value = (uint8_t *)fdt_getprop(fit, noffset, FIT_VALUE_PROP, &len);
+ if (*value == NULL) {
+ fit_get_debug(fit, noffset, FIT_VALUE_PROP, len);
+ *value_len = 0;
+ return -1;
+ }
+
+ *value_len = len;
+ return 0;
+}
+
+/**
+ * fit_image_hash_get_ignore - get hash ignore flag
+ * @fit: pointer to the FIT format image header
+ * @noffset: hash node offset
+ * @ignore: pointer to an int, will hold hash ignore flag
+ *
+ * fit_image_hash_get_ignore() finds hash ignore property in a given hash node.
+ * If the property is found and non-zero, the hash algorithm is not verified by
+ * u-boot automatically.
+ *
+ * returns:
+ * 0, on ignore not found
+ * value, on ignore found
+ */
+static int fit_image_hash_get_ignore(const void *fit, int noffset, int *ignore)
+{
+ int len;
+ int *value;
+
+ value = (int *)fdt_getprop(fit, noffset, FIT_IGNORE_PROP, &len);
+ if (value == NULL || len != sizeof(int))
+ *ignore = 0;
+ else
+ *ignore = *value;
+
+ return 0;
+}
+
+/**
+ * fit_set_timestamp - set node timestamp property
+ * @fit: pointer to the FIT format image header
+ * @noffset: node offset
+ * @timestamp: timestamp value to be set
+ *
+ * fit_set_timestamp() attempts to set timestamp property in the requested
+ * node and returns operation status to the caller.
+ *
+ * returns:
+ * 0, on success
+ * -1, on property read failure
+ */
+int fit_set_timestamp(void *fit, int noffset, time_t timestamp)
+{
+ uint32_t t;
+ int ret;
+
+ t = cpu_to_uimage(timestamp);
+ ret = fdt_setprop(fit, noffset, FIT_TIMESTAMP_PROP, &t,
+ sizeof(uint32_t));
+ if (ret) {
+ printf("Can't set '%s' property for '%s' node (%s)\n",
+ FIT_TIMESTAMP_PROP, fit_get_name(fit, noffset, NULL),
+ fdt_strerror(ret));
+ return -1;
+ }
+
+ return 0;
+}
+
+/**
+ * calculate_hash - calculate and return hash for provided input data
+ * @data: pointer to the input data
+ * @data_len: data length
+ * @algo: requested hash algorithm
+ * @value: pointer to the char, will hold hash value data (caller must
+ * allocate enough free space)
+ * value_len: length of the calculated hash
+ *
+ * calculate_hash() computes input data hash according to the requested
+ * algorithm.
+ * Resulting hash value is placed in caller provided 'value' buffer, length
+ * of the calculated hash is returned via value_len pointer argument.
+ *
+ * returns:
+ * 0, on success
+ * -1, when algo is unsupported
+ */
+int calculate_hash(const void *data, int data_len, const char *algo,
+ uint8_t *value, int *value_len)
+{
+ if (IMAGE_ENABLE_CRC32 && strcmp(algo, "crc32") == 0) {
+ *((uint32_t *)value) = crc32_wd(0, data, data_len,
+ CHUNKSZ_CRC32);
+ *((uint32_t *)value) = cpu_to_uimage(*((uint32_t *)value));
+ *value_len = 4;
+ } else if (IMAGE_ENABLE_SHA1 && strcmp(algo, "sha1") == 0) {
+ sha1_csum_wd((unsigned char *)data, data_len,
+ (unsigned char *)value, CHUNKSZ_SHA1);
+ *value_len = 20;
+ } else if (IMAGE_ENABLE_MD5 && strcmp(algo, "md5") == 0) {
+ md5_wd((unsigned char *)data, data_len, value, CHUNKSZ_MD5);
+ *value_len = 16;
+ } else {
+ debug("Unsupported hash alogrithm\n");
+ return -1;
+ }
+ return 0;
+}
+
+static int fit_image_check_hash(const void *fit, int noffset, const void *data,
+ size_t size, char **err_msgp)
+{
+ uint8_t value[FIT_MAX_HASH_LEN];
+ int value_len;
+ char *algo;
+ uint8_t *fit_value;
+ int fit_value_len;
+ int ignore;
+
+ *err_msgp = NULL;
+
+ if (fit_image_hash_get_algo(fit, noffset, &algo)) {
+ *err_msgp = "Can't get hash algo property";
+ return -1;
+ }
+ printf("%s", algo);
+
+ if (IMAGE_ENABLE_IGNORE) {
+ fit_image_hash_get_ignore(fit, noffset, &ignore);
+ if (ignore) {
+ printf("-skipped ");
+ return 0;
+ }
+ }
+
+ if (fit_image_hash_get_value(fit, noffset, &fit_value,
+ &fit_value_len)) {
+ *err_msgp = "Can't get hash value property";
+ return -1;
+ }
+
+ if (calculate_hash(data, size, algo, value, &value_len)) {
+ *err_msgp = "Unsupported hash algorithm";
+ return -1;
+ }
+
+ if (value_len != fit_value_len) {
+ *err_msgp = "Bad hash value len";
+ return -1;
+ } else if (memcmp(value, fit_value, value_len) != 0) {
+ *err_msgp = "Bad hash value";
+ return -1;
+ }
+
+ return 0;
+}
+
+/**
+ * fit_image_verify - verify data intergity
+ * @fit: pointer to the FIT format image header
+ * @image_noffset: component image node offset
+ *
+ * fit_image_verify() goes over component image hash nodes,
+ * re-calculates each data hash and compares with the value stored in hash
+ * node.
+ *
+ * returns:
+ * 1, if all hashes are valid
+ * 0, otherwise (or on error)
+ */
+int fit_image_verify(const void *fit, int image_noffset)
+{
+ const void *data;
+ size_t size;
+ int noffset;
+ char *err_msg = "";
+
+ /* Get image data and data length */
+ if (fit_image_get_data(fit, image_noffset, &data, &size)) {
+ err_msg = "Can't get image data/size";
+ return 0;
+ }
+
+ /* Process all hash subnodes of the component image node */
+ for (noffset = fdt_first_subnode(fit, image_noffset);
+ noffset >= 0;
+ noffset = fdt_next_subnode(fit, noffset)) {
+ const char *name = fit_get_name(fit, noffset, NULL);
+
+ /*
+ * Check subnode name, must be equal to "hash".
+ * Multiple hash nodes require unique unit node
+ * names, e.g. hash@1, hash@2, etc.
+ */
+ if (!strncmp(name, FIT_HASH_NODENAME,
+ strlen(FIT_HASH_NODENAME))) {
+ if (fit_image_check_hash(fit, noffset, data, size,
+ &err_msg))
+ goto error;
+ puts("+ ");
+ }
+ }
+
+ if (noffset == -FDT_ERR_TRUNCATED || noffset == -FDT_ERR_BADSTRUCTURE) {
+ err_msg = "Corrupted or truncated tree";
+ goto error;
+ }
+
+ return 1;
+
+error:
+ printf(" error!\n%s for '%s' hash node in '%s' image node\n",
+ err_msg, fit_get_name(fit, noffset, NULL),
+ fit_get_name(fit, image_noffset, NULL));
+ return 0;
+}
+
+/**
+ * fit_all_image_verify - verify data intergity for all images
+ * @fit: pointer to the FIT format image header
+ *
+ * fit_all_image_verify() goes over all images in the FIT and
+ * for every images checks if all it's hashes are valid.
+ *
+ * returns:
+ * 1, if all hashes of all images are valid
+ * 0, otherwise (or on error)
+ */
+int fit_all_image_verify(const void *fit)
+{
+ int images_noffset;
+ int noffset;
+ int ndepth;
+ int count;
+
+ /* Find images parent node offset */
+ images_noffset = fdt_path_offset(fit, FIT_IMAGES_PATH);
+ if (images_noffset < 0) {
+ printf("Can't find images parent node '%s' (%s)\n",
+ FIT_IMAGES_PATH, fdt_strerror(images_noffset));
+ return 0;
+ }
+
+ /* Process all image subnodes, check hashes for each */
+ printf("## Checking hash(es) for FIT Image at %08lx ...\n",
+ (ulong)fit);
+ for (ndepth = 0, count = 0,
+ noffset = fdt_next_node(fit, images_noffset, &ndepth);
+ (noffset >= 0) && (ndepth > 0);
+ noffset = fdt_next_node(fit, noffset, &ndepth)) {
+ if (ndepth == 1) {
+ /*
+ * Direct child node of the images parent node,
+ * i.e. component image node.
+ */
+ printf(" Hash(es) for Image %u (%s): ", count++,
+ fit_get_name(fit, noffset, NULL));
+
+ if (!fit_image_verify(fit, noffset))
+ return 0;
+ printf("\n");
+ }
+ }
+ return 1;
+}
+
+/**
+ * fit_image_check_os - check whether image node is of a given os type
+ * @fit: pointer to the FIT format image header
+ * @noffset: component image node offset
+ * @os: requested image os
+ *
+ * fit_image_check_os() reads image os property and compares its numeric
+ * id with the requested os. Comparison result is returned to the caller.
+ *
+ * returns:
+ * 1 if image is of given os type
+ * 0 otherwise (or on error)
+ */
+int fit_image_check_os(const void *fit, int noffset, uint8_t os)
+{
+ uint8_t image_os;
+
+ if (fit_image_get_os(fit, noffset, &image_os))
+ return 0;
+ return (os == image_os);
+}
+
+/**
+ * fit_image_check_arch - check whether image node is of a given arch
+ * @fit: pointer to the FIT format image header
+ * @noffset: component image node offset
+ * @arch: requested imagearch
+ *
+ * fit_image_check_arch() reads image arch property and compares its numeric
+ * id with the requested arch. Comparison result is returned to the caller.
+ *
+ * returns:
+ * 1 if image is of given arch
+ * 0 otherwise (or on error)
+ */
+int fit_image_check_arch(const void *fit, int noffset, uint8_t arch)
+{
+ uint8_t image_arch;
+
+ if (fit_image_get_arch(fit, noffset, &image_arch))
+ return 0;
+ return (arch == image_arch);
+}
+
+/**
+ * fit_image_check_type - check whether image node is of a given type
+ * @fit: pointer to the FIT format image header
+ * @noffset: component image node offset
+ * @type: requested image type
+ *
+ * fit_image_check_type() reads image type property and compares its numeric
+ * id with the requested type. Comparison result is returned to the caller.
+ *
+ * returns:
+ * 1 if image is of given type
+ * 0 otherwise (or on error)
+ */
+int fit_image_check_type(const void *fit, int noffset, uint8_t type)
+{
+ uint8_t image_type;
+
+ if (fit_image_get_type(fit, noffset, &image_type))
+ return 0;
+ return (type == image_type);
+}
+
+/**
+ * fit_image_check_comp - check whether image node uses given compression
+ * @fit: pointer to the FIT format image header
+ * @noffset: component image node offset
+ * @comp: requested image compression type
+ *
+ * fit_image_check_comp() reads image compression property and compares its
+ * numeric id with the requested compression type. Comparison result is
+ * returned to the caller.
+ *
+ * returns:
+ * 1 if image uses requested compression
+ * 0 otherwise (or on error)
+ */
+int fit_image_check_comp(const void *fit, int noffset, uint8_t comp)
+{
+ uint8_t image_comp;
+
+ if (fit_image_get_comp(fit, noffset, &image_comp))
+ return 0;
+ return (comp == image_comp);
+}
+
+/**
+ * fit_check_format - sanity check FIT image format
+ * @fit: pointer to the FIT format image header
+ *
+ * fit_check_format() runs a basic sanity FIT image verification.
+ * Routine checks for mandatory properties, nodes, etc.
+ *
+ * returns:
+ * 1, on success
+ * 0, on failure
+ */
+int fit_check_format(const void *fit)
+{
+ /* mandatory / node 'description' property */
+ if (fdt_getprop(fit, 0, FIT_DESC_PROP, NULL) == NULL) {
+ debug("Wrong FIT format: no description\n");
+ return 0;
+ }
+
+ if (IMAGE_ENABLE_TIMESTAMP) {
+ /* mandatory / node 'timestamp' property */
+ if (fdt_getprop(fit, 0, FIT_TIMESTAMP_PROP, NULL) == NULL) {
+ debug("Wrong FIT format: no timestamp\n");
+ return 0;
+ }
+ }
+
+ /* mandatory subimages parent '/images' node */
+ if (fdt_path_offset(fit, FIT_IMAGES_PATH) < 0) {
+ debug("Wrong FIT format: no images parent node\n");
+ return 0;
+ }
+
+ return 1;
+}
+
+
+/**
+ * fit_conf_find_compat
+ * @fit: pointer to the FIT format image header
+ * @fdt: pointer to the device tree to compare against
+ *
+ * fit_conf_find_compat() attempts to find the configuration whose fdt is the
+ * most compatible with the passed in device tree.
+ *
+ * Example:
+ *
+ * / o image-tree
+ * |-o images
+ * | |-o fdt@1
+ * | |-o fdt@2
+ * |
+ * |-o configurations
+ * |-o config@1
+ * | |-fdt = fdt@1
+ * |
+ * |-o config@2
+ * |-fdt = fdt@2
+ *
+ * / o U-Boot fdt
+ * |-compatible = "foo,bar", "bim,bam"
+ *
+ * / o kernel fdt1
+ * |-compatible = "foo,bar",
+ *
+ * / o kernel fdt2
+ * |-compatible = "bim,bam", "baz,biz"
+ *
+ * Configuration 1 would be picked because the first string in U-Boot's
+ * compatible list, "foo,bar", matches a compatible string in the root of fdt1.
+ * "bim,bam" in fdt2 matches the second string which isn't as good as fdt1.
+ *
+ * returns:
+ * offset to the configuration to use if one was found
+ * -1 otherwise
+ */
+int fit_conf_find_compat(const void *fit, const void *fdt)
+{
+ int ndepth = 0;
+ int noffset, confs_noffset, images_noffset;
+ const void *fdt_compat;
+ int fdt_compat_len;
+ int best_match_offset = 0;
+ int best_match_pos = 0;
+
+ confs_noffset = fdt_path_offset(fit, FIT_CONFS_PATH);
+ images_noffset = fdt_path_offset(fit, FIT_IMAGES_PATH);
+ if (confs_noffset < 0 || images_noffset < 0) {
+ debug("Can't find configurations or images nodes.\n");
+ return -1;
+ }
+
+ fdt_compat = fdt_getprop(fdt, 0, "compatible", &fdt_compat_len);
+ if (!fdt_compat) {
+ debug("Fdt for comparison has no \"compatible\" property.\n");
+ return -1;
+ }
+
+ /*
+ * Loop over the configurations in the FIT image.
+ */
+ for (noffset = fdt_next_node(fit, confs_noffset, &ndepth);
+ (noffset >= 0) && (ndepth > 0);
+ noffset = fdt_next_node(fit, noffset, &ndepth)) {
+ const void *kfdt;
+ const char *kfdt_name;
+ int kfdt_noffset;
+ const char *cur_fdt_compat;
+ int len;
+ size_t size;
+ int i;
+
+ if (ndepth > 1)
+ continue;
+
+ kfdt_name = fdt_getprop(fit, noffset, "fdt", &len);
+ if (!kfdt_name) {
+ debug("No fdt property found.\n");
+ continue;
+ }
+ kfdt_noffset = fdt_subnode_offset(fit, images_noffset,
+ kfdt_name);
+ if (kfdt_noffset < 0) {
+ debug("No image node named \"%s\" found.\n",
+ kfdt_name);
+ continue;
+ }
+ /*
+ * Get a pointer to this configuration's fdt.
+ */
+ if (fit_image_get_data(fit, kfdt_noffset, &kfdt, &size)) {
+ debug("Failed to get fdt \"%s\".\n", kfdt_name);
+ continue;
+ }
+
+ len = fdt_compat_len;
+ cur_fdt_compat = fdt_compat;
+ /*
+ * Look for a match for each U-Boot compatibility string in
+ * turn in this configuration's fdt.
+ */
+ for (i = 0; len > 0 &&
+ (!best_match_offset || best_match_pos > i); i++) {
+ int cur_len = strlen(cur_fdt_compat) + 1;
+
+ if (!fdt_node_check_compatible(kfdt, 0,
+ cur_fdt_compat)) {
+ best_match_offset = noffset;
+ best_match_pos = i;
+ break;
+ }
+ len -= cur_len;
+ cur_fdt_compat += cur_len;
+ }
+ }
+ if (!best_match_offset) {
+ debug("No match found.\n");
+ return -1;
+ }
+
+ return best_match_offset;
+}
+
+/**
+ * fit_conf_get_node - get node offset for configuration of a given unit name
+ * @fit: pointer to the FIT format image header
+ * @conf_uname: configuration node unit name
+ *
+ * fit_conf_get_node() finds a configuration (withing the '/configurations'
+ * parant node) of a provided unit name. If configuration is found its node
+ * offset is returned to the caller.
+ *
+ * When NULL is provided in second argument fit_conf_get_node() will search
+ * for a default configuration node instead. Default configuration node unit
+ * name is retrived from FIT_DEFAULT_PROP property of the '/configurations'
+ * node.
+ *
+ * returns:
+ * configuration node offset when found (>=0)
+ * negative number on failure (FDT_ERR_* code)
+ */
+int fit_conf_get_node(const void *fit, const char *conf_uname)
+{
+ int noffset, confs_noffset;
+ int len;
+
+ confs_noffset = fdt_path_offset(fit, FIT_CONFS_PATH);
+ if (confs_noffset < 0) {
+ debug("Can't find configurations parent node '%s' (%s)\n",
+ FIT_CONFS_PATH, fdt_strerror(confs_noffset));
+ return confs_noffset;
+ }
+
+ if (conf_uname == NULL) {
+ /* get configuration unit name from the default property */
+ debug("No configuration specified, trying default...\n");
+ conf_uname = (char *)fdt_getprop(fit, confs_noffset,
+ FIT_DEFAULT_PROP, &len);
+ if (conf_uname == NULL) {
+ fit_get_debug(fit, confs_noffset, FIT_DEFAULT_PROP,
+ len);
+ return len;
+ }
+ debug("Found default configuration: '%s'\n", conf_uname);
+ }
+
+ noffset = fdt_subnode_offset(fit, confs_noffset, conf_uname);
+ if (noffset < 0) {
+ debug("Can't get node offset for configuration unit name: '%s' (%s)\n",
+ conf_uname, fdt_strerror(noffset));
+ }
+
+ return noffset;
+}
+
+int fit_conf_get_prop_node(const void *fit, int noffset,
+ const char *prop_name)
+{
+ char *uname;
+ int len;
+
+ /* get kernel image unit name from configuration kernel property */
+ uname = (char *)fdt_getprop(fit, noffset, prop_name, &len);
+ if (uname == NULL)
+ return len;
+
+ return fit_image_get_node(fit, uname);
+}
+
+/**
+ * fit_conf_get_kernel_node - get kernel image node offset that corresponds to
+ * a given configuration
+ * @fit: pointer to the FIT format image header
+ * @noffset: configuration node offset
+ *
+ * fit_conf_get_kernel_node() retrives kernel image node unit name from
+ * configuration FIT_KERNEL_PROP property and translates it to the node
+ * offset.
+ *
+ * returns:
+ * image node offset when found (>=0)
+ * negative number on failure (FDT_ERR_* code)
+ */
+int fit_conf_get_kernel_node(const void *fit, int noffset)
+{
+ return fit_conf_get_prop_node(fit, noffset, FIT_KERNEL_PROP);
+}
+
+/**
+ * fit_conf_get_ramdisk_node - get ramdisk image node offset that corresponds to
+ * a given configuration
+ * @fit: pointer to the FIT format image header
+ * @noffset: configuration node offset
+ *
+ * fit_conf_get_ramdisk_node() retrives ramdisk image node unit name from
+ * configuration FIT_KERNEL_PROP property and translates it to the node
+ * offset.
+ *
+ * returns:
+ * image node offset when found (>=0)
+ * negative number on failure (FDT_ERR_* code)
+ */
+int fit_conf_get_ramdisk_node(const void *fit, int noffset)
+{
+ return fit_conf_get_prop_node(fit, noffset, FIT_RAMDISK_PROP);
+}
+
+/**
+ * fit_conf_get_fdt_node - get fdt image node offset that corresponds to
+ * a given configuration
+ * @fit: pointer to the FIT format image header
+ * @noffset: configuration node offset
+ *
+ * fit_conf_get_fdt_node() retrives fdt image node unit name from
+ * configuration FIT_KERNEL_PROP property and translates it to the node
+ * offset.
+ *
+ * returns:
+ * image node offset when found (>=0)
+ * negative number on failure (FDT_ERR_* code)
+ */
+int fit_conf_get_fdt_node(const void *fit, int noffset)
+{
+ return fit_conf_get_prop_node(fit, noffset, FIT_FDT_PROP);
+}
+
+/**
+ * fit_conf_print - prints out the FIT configuration details
+ * @fit: pointer to the FIT format image header
+ * @noffset: offset of the configuration node
+ * @p: pointer to prefix string
+ *
+ * fit_conf_print() lists all mandatory properies for the processed
+ * configuration node.
+ *
+ * returns:
+ * no returned results
+ */
+void fit_conf_print(const void *fit, int noffset, const char *p)
+{
+ char *desc;
+ char *uname;
+ int ret;
+
+ /* Mandatory properties */
+ ret = fit_get_desc(fit, noffset, &desc);
+ printf("%s Description: ", p);
+ if (ret)
+ printf("unavailable\n");
+ else
+ printf("%s\n", desc);
+
+ uname = (char *)fdt_getprop(fit, noffset, FIT_KERNEL_PROP, NULL);
+ printf("%s Kernel: ", p);
+ if (uname == NULL)
+ printf("unavailable\n");
+ else
+ printf("%s\n", uname);
+
+ /* Optional properties */
+ uname = (char *)fdt_getprop(fit, noffset, FIT_RAMDISK_PROP, NULL);
+ if (uname)
+ printf("%s Init Ramdisk: %s\n", p, uname);
+
+ uname = (char *)fdt_getprop(fit, noffset, FIT_FDT_PROP, NULL);
+ if (uname)
+ printf("%s FDT: %s\n", p, uname);
+}
+
+/**
+ * fit_check_ramdisk - verify FIT format ramdisk subimage
+ * @fit_hdr: pointer to the FIT ramdisk header
+ * @rd_noffset: ramdisk subimage node offset within FIT image
+ * @arch: requested ramdisk image architecture type
+ * @verify: data CRC verification flag
+ *
+ * fit_check_ramdisk() verifies integrity of the ramdisk subimage and from
+ * specified FIT image.
+ *
+ * returns:
+ * 1, on success
+ * 0, on failure
+ */
+int fit_check_ramdisk(const void *fit, int rd_noffset, uint8_t arch,
+ int verify)
+{
+ fit_image_print(fit, rd_noffset, " ");
+
+ if (verify) {
+ puts(" Verifying Hash Integrity ... ");
+ if (!fit_image_verify(fit, rd_noffset)) {
+ puts("Bad Data Hash\n");
+ bootstage_error(BOOTSTAGE_ID_FIT_RD_HASH);
+ return 0;
+ }
+ puts("OK\n");
+ }
+
+ bootstage_mark(BOOTSTAGE_ID_FIT_RD_CHECK_ALL);
+ if (!fit_image_check_os(fit, rd_noffset, IH_OS_LINUX) ||
+ !fit_image_check_arch(fit, rd_noffset, arch) ||
+ !fit_image_check_type(fit, rd_noffset, IH_TYPE_RAMDISK)) {
+ printf("No Linux %s Ramdisk Image\n",
+ genimg_get_arch_name(arch));
+ bootstage_error(BOOTSTAGE_ID_FIT_RD_CHECK_ALL);
+ return 0;
+ }
+
+ bootstage_mark(BOOTSTAGE_ID_FIT_RD_CHECK_ALL_OK);
+ return 1;
+}
diff --git a/common/image.c b/common/image.c
index 60c2127..e91c89e 100644
--- a/common/image.c
+++ b/common/image.c
@@ -39,9 +39,7 @@
#include <logbuff.h>
#endif
-#if defined(CONFIG_TIMESTAMP) || defined(CONFIG_CMD_DATE)
#include <rtc.h>
-#endif
#include <environment.h>
#include <image.h>
@@ -51,13 +49,9 @@
#include <fdt_support.h>
#endif
-#if defined(CONFIG_FIT)
#include <u-boot/md5.h>
#include <sha1.h>
-
-static int fit_check_ramdisk(const void *fit, int os_noffset,
- uint8_t arch, int verify);
-#endif
+#include <asm/io.h>
#ifdef CONFIG_CMD_BDI
extern int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
@@ -76,6 +70,10 @@
#include <u-boot/crc.h>
+#ifndef CONFIG_SYS_BARGSIZE
+#define CONFIG_SYS_BARGSIZE 512
+#endif
+
static const table_entry_t uimage_arch[] = {
{ IH_ARCH_INVALID, NULL, "Invalid ARCH", },
{ IH_ARCH_ALPHA, "alpha", "Alpha", },
@@ -97,6 +95,7 @@
{ IH_ARCH_AVR32, "avr32", "AVR32", },
{ IH_ARCH_NDS32, "nds32", "NDS32", },
{ IH_ARCH_OPENRISC, "or1k", "OpenRISC 1000",},
+ { IH_ARCH_SANDBOX, "sandbox", "Sandbox", },
{ -1, "", "", },
};
@@ -163,10 +162,6 @@
{ -1, "", "", },
};
-#if defined(CONFIG_TIMESTAMP) || defined(CONFIG_CMD_DATE) || defined(USE_HOSTCC)
-static void genimg_print_time(time_t timestamp);
-#endif
-
/*****************************************************************************/
/* Legacy format routines */
/*****************************************************************************/
@@ -305,17 +300,12 @@
const image_header_t *hdr = (const image_header_t *)ptr;
const char *p;
-#ifdef USE_HOSTCC
- p = "";
-#else
- p = " ";
-#endif
-
+ p = IMAGE_INDENT_STRING;
printf("%sImage Name: %.*s\n", p, IH_NMLEN, image_get_name(hdr));
-#if defined(CONFIG_TIMESTAMP) || defined(CONFIG_CMD_DATE) || defined(USE_HOSTCC)
- printf("%sCreated: ", p);
- genimg_print_time((time_t)image_get_time(hdr));
-#endif
+ if (IMAGE_ENABLE_TIMESTAMP) {
+ printf("%sCreated: ", p);
+ genimg_print_time((time_t)image_get_time(hdr));
+ }
printf("%sImage Type: ", p);
image_print_type(hdr);
printf("%sData Size: ", p);
@@ -524,8 +514,8 @@
#endif
}
-#if defined(CONFIG_TIMESTAMP) || defined(CONFIG_CMD_DATE) || defined(USE_HOSTCC)
-static void genimg_print_time(time_t timestamp)
+#if IMAGE_ENABLE_TIMESTAMP
+void genimg_print_time(time_t timestamp)
{
#ifndef USE_HOSTCC
struct rtc_time tm;
@@ -538,7 +528,7 @@
printf("%s", ctime(×tamp));
#endif
}
-#endif /* CONFIG_TIMESTAMP || CONFIG_CMD_DATE || USE_HOSTCC */
+#endif
/**
* get_table_entry_name - translate entry id to long name
@@ -672,7 +662,7 @@
* returns:
* image format type or IMAGE_FORMAT_INVALID if no image is present
*/
-int genimg_get_format(void *img_addr)
+int genimg_get_format(const void *img_addr)
{
ulong format = IMAGE_FORMAT_INVALID;
const image_header_t *hdr;
@@ -712,6 +702,8 @@
ulong h_size, d_size;
if (addr_dataflash(img_addr)) {
+ void *buf;
+
/* ger RAM address */
ram_addr = CONFIG_SYS_LOAD_ADDR;
@@ -726,20 +718,20 @@
debug(" Reading image header from dataflash address "
"%08lx to RAM address %08lx\n", img_addr, ram_addr);
- read_dataflash(img_addr, h_size, (char *)ram_addr);
+ buf = map_sysmem(ram_addr, 0);
+ read_dataflash(img_addr, h_size, buf);
/* get data size */
- switch (genimg_get_format((void *)ram_addr)) {
+ switch (genimg_get_format(buf)) {
case IMAGE_FORMAT_LEGACY:
- d_size = image_get_data_size(
- (const image_header_t *)ram_addr);
+ d_size = image_get_data_size(buf);
debug(" Legacy format image found at 0x%08lx, "
"size 0x%08lx\n",
ram_addr, d_size);
break;
#if defined(CONFIG_FIT)
case IMAGE_FORMAT_FIT:
- d_size = fit_get_size((const void *)ram_addr) - h_size;
+ d_size = fit_get_size(buf) - h_size;
debug(" FIT/FDT format image found at 0x%08lx, "
"size 0x%08lx\n",
ram_addr, d_size);
@@ -757,7 +749,7 @@
ram_addr + h_size);
read_dataflash(img_addr + h_size, d_size,
- (char *)(ram_addr + h_size));
+ (char *)(buf + h_size));
}
#endif /* CONFIG_HAS_DATAFLASH */
@@ -813,6 +805,7 @@
ulong rd_addr, rd_load;
ulong rd_data, rd_len;
const image_header_t *rd_hdr;
+ void *buf;
#ifdef CONFIG_SUPPORT_RAW_INITRD
char *end;
#endif
@@ -874,7 +867,7 @@
/* use FIT configuration provided in first bootm
* command argument
*/
- rd_addr = (ulong)images->fit_hdr_os;
+ rd_addr = map_to_sysmem(images->fit_hdr_os);
fit_uname_config = images->fit_uname_cfg;
debug("* ramdisk: using config '%s' from image "
"at 0x%08lx\n",
@@ -884,7 +877,7 @@
* Check whether configuration has ramdisk defined,
* if not, don't try to use it, quit silently.
*/
- fit_hdr = (void *)rd_addr;
+ fit_hdr = images->fit_hdr_os;
cfg_noffset = fit_conf_get_node(fit_hdr,
fit_uname_config);
if (cfg_noffset < 0) {
@@ -909,7 +902,8 @@
* address provided in the second bootm argument
* check image type, for FIT images get FIT node.
*/
- switch (genimg_get_format((void *)rd_addr)) {
+ buf = map_sysmem(rd_addr, 0);
+ switch (genimg_get_format(buf)) {
case IMAGE_FORMAT_LEGACY:
printf("## Loading init Ramdisk from Legacy "
"Image at %08lx ...\n", rd_addr);
@@ -927,7 +921,7 @@
break;
#if defined(CONFIG_FIT)
case IMAGE_FORMAT_FIT:
- fit_hdr = (void *)rd_addr;
+ fit_hdr = buf;
printf("## Loading init Ramdisk from FIT "
"Image at %08lx ...\n", rd_addr);
@@ -1160,570 +1154,6 @@
}
#endif /* CONFIG_SYS_BOOT_RAMDISK_HIGH */
-#ifdef CONFIG_OF_LIBFDT
-static void fdt_error(const char *msg)
-{
- puts("ERROR: ");
- puts(msg);
- puts(" - must RESET the board to recover.\n");
-}
-
-static const image_header_t *image_get_fdt(ulong fdt_addr)
-{
- const image_header_t *fdt_hdr = (const image_header_t *)fdt_addr;
-
- image_print_contents(fdt_hdr);
-
- puts(" Verifying Checksum ... ");
- if (!image_check_hcrc(fdt_hdr)) {
- fdt_error("fdt header checksum invalid");
- return NULL;
- }
-
- if (!image_check_dcrc(fdt_hdr)) {
- fdt_error("fdt checksum invalid");
- return NULL;
- }
- puts("OK\n");
-
- if (!image_check_type(fdt_hdr, IH_TYPE_FLATDT)) {
- fdt_error("uImage is not a fdt");
- return NULL;
- }
- if (image_get_comp(fdt_hdr) != IH_COMP_NONE) {
- fdt_error("uImage is compressed");
- return NULL;
- }
- if (fdt_check_header((char *)image_get_data(fdt_hdr)) != 0) {
- fdt_error("uImage data is not a fdt");
- return NULL;
- }
- return fdt_hdr;
-}
-
-/**
- * fit_check_fdt - verify FIT format FDT subimage
- * @fit_hdr: pointer to the FIT header
- * fdt_noffset: FDT subimage node offset within FIT image
- * @verify: data CRC verification flag
- *
- * fit_check_fdt() verifies integrity of the FDT subimage and from
- * specified FIT image.
- *
- * returns:
- * 1, on success
- * 0, on failure
- */
-#if defined(CONFIG_FIT)
-static int fit_check_fdt(const void *fit, int fdt_noffset, int verify)
-{
- fit_image_print(fit, fdt_noffset, " ");
-
- if (verify) {
- puts(" Verifying Hash Integrity ... ");
- if (!fit_image_check_hashes(fit, fdt_noffset)) {
- fdt_error("Bad Data Hash");
- return 0;
- }
- puts("OK\n");
- }
-
- if (!fit_image_check_type(fit, fdt_noffset, IH_TYPE_FLATDT)) {
- fdt_error("Not a FDT image");
- return 0;
- }
-
- if (!fit_image_check_comp(fit, fdt_noffset, IH_COMP_NONE)) {
- fdt_error("FDT image is compressed");
- return 0;
- }
-
- return 1;
-}
-#endif /* CONFIG_FIT */
-
-#ifndef CONFIG_SYS_FDT_PAD
-#define CONFIG_SYS_FDT_PAD 0x3000
-#endif
-
-#if defined(CONFIG_OF_LIBFDT)
-/**
- * boot_fdt_add_mem_rsv_regions - Mark the memreserve sections as unusable
- * @lmb: pointer to lmb handle, will be used for memory mgmt
- * @fdt_blob: pointer to fdt blob base address
- *
- * Adds the memreserve regions in the dtb to the lmb block. Adding the
- * memreserve regions prevents u-boot from using them to store the initrd
- * or the fdt blob.
- */
-void boot_fdt_add_mem_rsv_regions(struct lmb *lmb, void *fdt_blob)
-{
- uint64_t addr, size;
- int i, total;
-
- if (fdt_check_header(fdt_blob) != 0)
- return;
-
- total = fdt_num_mem_rsv(fdt_blob);
- for (i = 0; i < total; i++) {
- if (fdt_get_mem_rsv(fdt_blob, i, &addr, &size) != 0)
- continue;
- printf(" reserving fdt memory region: addr=%llx size=%llx\n",
- (unsigned long long)addr, (unsigned long long)size);
- lmb_reserve(lmb, addr, size);
- }
-}
-
-/**
- * boot_relocate_fdt - relocate flat device tree
- * @lmb: pointer to lmb handle, will be used for memory mgmt
- * @of_flat_tree: pointer to a char* variable, will hold fdt start address
- * @of_size: pointer to a ulong variable, will hold fdt length
- *
- * boot_relocate_fdt() allocates a region of memory within the bootmap and
- * relocates the of_flat_tree into that region, even if the fdt is already in
- * the bootmap. It also expands the size of the fdt by CONFIG_SYS_FDT_PAD
- * bytes.
- *
- * of_flat_tree and of_size are set to final (after relocation) values
- *
- * returns:
- * 0 - success
- * 1 - failure
- */
-int boot_relocate_fdt(struct lmb *lmb, char **of_flat_tree, ulong *of_size)
-{
- void *fdt_blob = *of_flat_tree;
- void *of_start = NULL;
- char *fdt_high;
- ulong of_len = 0;
- int err;
- int disable_relocation = 0;
-
- /* nothing to do */
- if (*of_size == 0)
- return 0;
-
- if (fdt_check_header(fdt_blob) != 0) {
- fdt_error("image is not a fdt");
- goto error;
- }
-
- /* position on a 4K boundary before the alloc_current */
- /* Pad the FDT by a specified amount */
- of_len = *of_size + CONFIG_SYS_FDT_PAD;
-
- /* If fdt_high is set use it to select the relocation address */
- fdt_high = getenv("fdt_high");
- if (fdt_high) {
- void *desired_addr = (void *)simple_strtoul(fdt_high, NULL, 16);
-
- if (((ulong) desired_addr) == ~0UL) {
- /* All ones means use fdt in place */
- of_start = fdt_blob;
- lmb_reserve(lmb, (ulong)of_start, of_len);
- disable_relocation = 1;
- } else if (desired_addr) {
- of_start =
- (void *)(ulong) lmb_alloc_base(lmb, of_len, 0x1000,
- (ulong)desired_addr);
- if (of_start == NULL) {
- puts("Failed using fdt_high value for Device Tree");
- goto error;
- }
- } else {
- of_start =
- (void *)(ulong) lmb_alloc(lmb, of_len, 0x1000);
- }
- } else {
- of_start =
- (void *)(ulong) lmb_alloc_base(lmb, of_len, 0x1000,
- getenv_bootm_mapsize()
- + getenv_bootm_low());
- }
-
- if (of_start == NULL) {
- puts("device tree - allocation error\n");
- goto error;
- }
-
- if (disable_relocation) {
- /* We assume there is space after the existing fdt to use for padding */
- fdt_set_totalsize(of_start, of_len);
- printf(" Using Device Tree in place at %p, end %p\n",
- of_start, of_start + of_len - 1);
- } else {
- debug("## device tree at %p ... %p (len=%ld [0x%lX])\n",
- fdt_blob, fdt_blob + *of_size - 1, of_len, of_len);
-
- printf(" Loading Device Tree to %p, end %p ... ",
- of_start, of_start + of_len - 1);
-
- err = fdt_open_into(fdt_blob, of_start, of_len);
- if (err != 0) {
- fdt_error("fdt move failed");
- goto error;
- }
- puts("OK\n");
- }
-
- *of_flat_tree = of_start;
- *of_size = of_len;
-
- set_working_fdt_addr(*of_flat_tree);
- return 0;
-
-error:
- return 1;
-}
-#endif /* CONFIG_OF_LIBFDT */
-
-/**
- * boot_get_fdt - main fdt handling routine
- * @argc: command argument count
- * @argv: command argument list
- * @images: pointer to the bootm images structure
- * @of_flat_tree: pointer to a char* variable, will hold fdt start address
- * @of_size: pointer to a ulong variable, will hold fdt length
- *
- * boot_get_fdt() is responsible for finding a valid flat device tree image.
- * Curently supported are the following ramdisk sources:
- * - multicomponent kernel/ramdisk image,
- * - commandline provided address of decicated ramdisk image.
- *
- * returns:
- * 0, if fdt image was found and valid, or skipped
- * of_flat_tree and of_size are set to fdt start address and length if
- * fdt image is found and valid
- *
- * 1, if fdt image is found but corrupted
- * of_flat_tree and of_size are set to 0 if no fdt exists
- */
-int boot_get_fdt(int flag, int argc, char * const argv[],
- bootm_headers_t *images, char **of_flat_tree, ulong *of_size)
-{
- const image_header_t *fdt_hdr;
- ulong fdt_addr;
- char *fdt_blob = NULL;
- ulong image_start, image_data, image_end;
- ulong load_start, load_end;
-#if defined(CONFIG_FIT)
- void *fit_hdr;
- const char *fit_uname_config = NULL;
- const char *fit_uname_fdt = NULL;
- ulong default_addr;
- int cfg_noffset;
- int fdt_noffset;
- const void *data;
- size_t size;
-#endif
-
- *of_flat_tree = NULL;
- *of_size = 0;
-
- if (argc > 3 || genimg_has_config(images)) {
-#if defined(CONFIG_FIT)
- if (argc > 3) {
- /*
- * If the FDT blob comes from the FIT image and the
- * FIT image address is omitted in the command line
- * argument, try to use ramdisk or os FIT image
- * address or default load address.
- */
- if (images->fit_uname_rd)
- default_addr = (ulong)images->fit_hdr_rd;
- else if (images->fit_uname_os)
- default_addr = (ulong)images->fit_hdr_os;
- else
- default_addr = load_addr;
-
- if (fit_parse_conf(argv[3], default_addr,
- &fdt_addr, &fit_uname_config)) {
- debug("* fdt: config '%s' from image at "
- "0x%08lx\n",
- fit_uname_config, fdt_addr);
- } else if (fit_parse_subimage(argv[3], default_addr,
- &fdt_addr, &fit_uname_fdt)) {
- debug("* fdt: subimage '%s' from image at "
- "0x%08lx\n",
- fit_uname_fdt, fdt_addr);
- } else
-#endif
- {
- fdt_addr = simple_strtoul(argv[3], NULL, 16);
- debug("* fdt: cmdline image address = "
- "0x%08lx\n",
- fdt_addr);
- }
-#if defined(CONFIG_FIT)
- } else {
- /* use FIT configuration provided in first bootm
- * command argument
- */
- fdt_addr = (ulong)images->fit_hdr_os;
- fit_uname_config = images->fit_uname_cfg;
- debug("* fdt: using config '%s' from image "
- "at 0x%08lx\n",
- fit_uname_config, fdt_addr);
-
- /*
- * Check whether configuration has FDT blob defined,
- * if not quit silently.
- */
- fit_hdr = (void *)fdt_addr;
- cfg_noffset = fit_conf_get_node(fit_hdr,
- fit_uname_config);
- if (cfg_noffset < 0) {
- debug("* fdt: no such config\n");
- return 0;
- }
-
- fdt_noffset = fit_conf_get_fdt_node(fit_hdr,
- cfg_noffset);
- if (fdt_noffset < 0) {
- debug("* fdt: no fdt in config\n");
- return 0;
- }
- }
-#endif
-
- debug("## Checking for 'FDT'/'FDT Image' at %08lx\n",
- fdt_addr);
-
- /* copy from dataflash if needed */
- fdt_addr = genimg_get_image(fdt_addr);
-
- /*
- * Check if there is an FDT image at the
- * address provided in the second bootm argument
- * check image type, for FIT images get a FIT node.
- */
- switch (genimg_get_format((void *)fdt_addr)) {
- case IMAGE_FORMAT_LEGACY:
- /* verify fdt_addr points to a valid image header */
- printf("## Flattened Device Tree from Legacy Image "
- "at %08lx\n",
- fdt_addr);
- fdt_hdr = image_get_fdt(fdt_addr);
- if (!fdt_hdr)
- goto error;
-
- /*
- * move image data to the load address,
- * make sure we don't overwrite initial image
- */
- image_start = (ulong)fdt_hdr;
- image_data = (ulong)image_get_data(fdt_hdr);
- image_end = image_get_image_end(fdt_hdr);
-
- load_start = image_get_load(fdt_hdr);
- load_end = load_start + image_get_data_size(fdt_hdr);
-
- if (load_start == image_start ||
- load_start == image_data) {
- fdt_blob = (char *)image_data;
- break;
- }
-
- if ((load_start < image_end) && (load_end > image_start)) {
- fdt_error("fdt overwritten");
- goto error;
- }
-
- debug(" Loading FDT from 0x%08lx to 0x%08lx\n",
- image_data, load_start);
-
- memmove((void *)load_start,
- (void *)image_data,
- image_get_data_size(fdt_hdr));
-
- fdt_blob = (char *)load_start;
- break;
- case IMAGE_FORMAT_FIT:
- /*
- * This case will catch both: new uImage format
- * (libfdt based) and raw FDT blob (also libfdt
- * based).
- */
-#if defined(CONFIG_FIT)
- /* check FDT blob vs FIT blob */
- if (fit_check_format((const void *)fdt_addr)) {
- /*
- * FIT image
- */
- fit_hdr = (void *)fdt_addr;
- printf("## Flattened Device Tree from FIT "
- "Image at %08lx\n",
- fdt_addr);
-
- if (!fit_uname_fdt) {
- /*
- * no FDT blob image node unit name,
- * try to get config node first. If
- * config unit node name is NULL
- * fit_conf_get_node() will try to
- * find default config node
- */
- cfg_noffset = fit_conf_get_node(fit_hdr,
- fit_uname_config);
-
- if (cfg_noffset < 0) {
- fdt_error("Could not find "
- "configuration "
- "node\n");
- goto error;
- }
-
- fit_uname_config = fdt_get_name(fit_hdr,
- cfg_noffset, NULL);
- printf(" Using '%s' configuration\n",
- fit_uname_config);
-
- fdt_noffset = fit_conf_get_fdt_node(
- fit_hdr,
- cfg_noffset);
- fit_uname_fdt = fit_get_name(fit_hdr,
- fdt_noffset, NULL);
- } else {
- /* get FDT component image node offset */
- fdt_noffset = fit_image_get_node(
- fit_hdr,
- fit_uname_fdt);
- }
- if (fdt_noffset < 0) {
- fdt_error("Could not find subimage "
- "node\n");
- goto error;
- }
-
- printf(" Trying '%s' FDT blob subimage\n",
- fit_uname_fdt);
-
- if (!fit_check_fdt(fit_hdr, fdt_noffset,
- images->verify))
- goto error;
-
- /* get ramdisk image data address and length */
- if (fit_image_get_data(fit_hdr, fdt_noffset,
- &data, &size)) {
- fdt_error("Could not find FDT "
- "subimage data");
- goto error;
- }
-
- /* verift that image data is a proper FDT blob */
- if (fdt_check_header((char *)data) != 0) {
- fdt_error("Subimage data is not a FTD");
- goto error;
- }
-
- /*
- * move image data to the load address,
- * make sure we don't overwrite initial image
- */
- image_start = (ulong)fit_hdr;
- image_end = fit_get_end(fit_hdr);
-
- if (fit_image_get_load(fit_hdr, fdt_noffset,
- &load_start) == 0) {
- load_end = load_start + size;
-
- if ((load_start < image_end) &&
- (load_end > image_start)) {
- fdt_error("FDT overwritten");
- goto error;
- }
-
- printf(" Loading FDT from 0x%08lx "
- "to 0x%08lx\n",
- (ulong)data,
- load_start);
-
- memmove((void *)load_start,
- (void *)data, size);
-
- fdt_blob = (char *)load_start;
- } else {
- fdt_blob = (char *)data;
- }
-
- images->fit_hdr_fdt = fit_hdr;
- images->fit_uname_fdt = fit_uname_fdt;
- images->fit_noffset_fdt = fdt_noffset;
- break;
- } else
-#endif
- {
- /*
- * FDT blob
- */
- fdt_blob = (char *)fdt_addr;
- debug("* fdt: raw FDT blob\n");
- printf("## Flattened Device Tree blob at "
- "%08lx\n", (long)fdt_blob);
- }
- break;
- default:
- puts("ERROR: Did not find a cmdline Flattened Device "
- "Tree\n");
- goto error;
- }
-
- printf(" Booting using the fdt blob at 0x%p\n", fdt_blob);
-
- } else if (images->legacy_hdr_valid &&
- image_check_type(&images->legacy_hdr_os_copy,
- IH_TYPE_MULTI)) {
-
- ulong fdt_data, fdt_len;
-
- /*
- * Now check if we have a legacy multi-component image,
- * get second entry data start address and len.
- */
- printf("## Flattened Device Tree from multi "
- "component Image at %08lX\n",
- (ulong)images->legacy_hdr_os);
-
- image_multi_getimg(images->legacy_hdr_os, 2, &fdt_data,
- &fdt_len);
- if (fdt_len) {
-
- fdt_blob = (char *)fdt_data;
- printf(" Booting using the fdt at 0x%p\n", fdt_blob);
-
- if (fdt_check_header(fdt_blob) != 0) {
- fdt_error("image is not a fdt");
- goto error;
- }
-
- if (fdt_totalsize(fdt_blob) != fdt_len) {
- fdt_error("fdt size != image size");
- goto error;
- }
- } else {
- debug("## No Flattened Device Tree\n");
- return 0;
- }
- } else {
- debug("## No Flattened Device Tree\n");
- return 0;
- }
-
- *of_flat_tree = fdt_blob;
- *of_size = fdt_totalsize(fdt_blob);
- debug(" of_flat_tree at 0x%08lx size 0x%08lx\n",
- (ulong)*of_flat_tree, *of_size);
-
- return 0;
-
-error:
- *of_flat_tree = NULL;
- *of_size = 0;
- return 1;
-}
-#endif /* CONFIG_OF_LIBFDT */
-
#ifdef CONFIG_SYS_BOOT_GET_CMDLINE
/**
* boot_get_cmdline - allocate and initialize kernel cmdline
@@ -1797,1608 +1227,50 @@
return 0;
}
#endif /* CONFIG_SYS_BOOT_GET_KBD */
-#endif /* !USE_HOSTCC */
-#if defined(CONFIG_FIT)
-/*****************************************************************************/
-/* New uImage format routines */
-/*****************************************************************************/
-#ifndef USE_HOSTCC
-static int fit_parse_spec(const char *spec, char sepc, ulong addr_curr,
- ulong *addr, const char **name)
+#ifdef CONFIG_LMB
+int image_setup_linux(bootm_headers_t *images)
{
- const char *sep;
-
- *addr = addr_curr;
- *name = NULL;
-
- sep = strchr(spec, sepc);
- if (sep) {
- if (sep - spec > 0)
- *addr = simple_strtoul(spec, NULL, 16);
-
- *name = sep + 1;
- return 1;
- }
-
- return 0;
-}
-
-/**
- * fit_parse_conf - parse FIT configuration spec
- * @spec: input string, containing configuration spec
- * @add_curr: current image address (to be used as a possible default)
- * @addr: pointer to a ulong variable, will hold FIT image address of a given
- * configuration
- * @conf_name double pointer to a char, will hold pointer to a configuration
- * unit name
- *
- * fit_parse_conf() expects configuration spec in the for of [<addr>]#<conf>,
- * where <addr> is a FIT image address that contains configuration
- * with a <conf> unit name.
- *
- * Address part is optional, and if omitted default add_curr will
- * be used instead.
- *
- * returns:
- * 1 if spec is a valid configuration string,
- * addr and conf_name are set accordingly
- * 0 otherwise
- */
-int fit_parse_conf(const char *spec, ulong addr_curr,
- ulong *addr, const char **conf_name)
-{
- return fit_parse_spec(spec, '#', addr_curr, addr, conf_name);
-}
-
-/**
- * fit_parse_subimage - parse FIT subimage spec
- * @spec: input string, containing subimage spec
- * @add_curr: current image address (to be used as a possible default)
- * @addr: pointer to a ulong variable, will hold FIT image address of a given
- * subimage
- * @image_name: double pointer to a char, will hold pointer to a subimage name
- *
- * fit_parse_subimage() expects subimage spec in the for of
- * [<addr>]:<subimage>, where <addr> is a FIT image address that contains
- * subimage with a <subimg> unit name.
- *
- * Address part is optional, and if omitted default add_curr will
- * be used instead.
- *
- * returns:
- * 1 if spec is a valid subimage string,
- * addr and image_name are set accordingly
- * 0 otherwise
- */
-int fit_parse_subimage(const char *spec, ulong addr_curr,
- ulong *addr, const char **image_name)
-{
- return fit_parse_spec(spec, ':', addr_curr, addr, image_name);
-}
-#endif /* !USE_HOSTCC */
-
-static void fit_get_debug(const void *fit, int noffset,
- char *prop_name, int err)
-{
- debug("Can't get '%s' property from FIT 0x%08lx, "
- "node: offset %d, name %s (%s)\n",
- prop_name, (ulong)fit, noffset,
- fit_get_name(fit, noffset, NULL),
- fdt_strerror(err));
-}
-
-/**
- * fit_print_contents - prints out the contents of the FIT format image
- * @fit: pointer to the FIT format image header
- * @p: pointer to prefix string
- *
- * fit_print_contents() formats a multi line FIT image contents description.
- * The routine prints out FIT image properties (root node level) follwed by
- * the details of each component image.
- *
- * returns:
- * no returned results
- */
-void fit_print_contents(const void *fit)
-{
- char *desc;
- char *uname;
- int images_noffset;
- int confs_noffset;
- int noffset;
- int ndepth;
- int count = 0;
- int ret;
- const char *p;
-#if defined(CONFIG_TIMESTAMP) || defined(CONFIG_CMD_DATE) || defined(USE_HOSTCC)
- time_t timestamp;
-#endif
-
-#ifdef USE_HOSTCC
- p = "";
-#else
- p = " ";
-#endif
-
- /* Root node properties */
- ret = fit_get_desc(fit, 0, &desc);
- printf("%sFIT description: ", p);
- if (ret)
- printf("unavailable\n");
- else
- printf("%s\n", desc);
-
-#if defined(CONFIG_TIMESTAMP) || defined(CONFIG_CMD_DATE) || defined(USE_HOSTCC)
- ret = fit_get_timestamp(fit, 0, ×tamp);
- printf("%sCreated: ", p);
- if (ret)
- printf("unavailable\n");
- else
- genimg_print_time(timestamp);
-#endif
-
- /* Find images parent node offset */
- images_noffset = fdt_path_offset(fit, FIT_IMAGES_PATH);
- if (images_noffset < 0) {
- printf("Can't find images parent node '%s' (%s)\n",
- FIT_IMAGES_PATH, fdt_strerror(images_noffset));
- return;
- }
-
- /* Process its subnodes, print out component images details */
- for (ndepth = 0, count = 0,
- noffset = fdt_next_node(fit, images_noffset, &ndepth);
- (noffset >= 0) && (ndepth > 0);
- noffset = fdt_next_node(fit, noffset, &ndepth)) {
- if (ndepth == 1) {
- /*
- * Direct child node of the images parent node,
- * i.e. component image node.
- */
- printf("%s Image %u (%s)\n", p, count++,
- fit_get_name(fit, noffset, NULL));
-
- fit_image_print(fit, noffset, p);
- }
- }
-
- /* Find configurations parent node offset */
- confs_noffset = fdt_path_offset(fit, FIT_CONFS_PATH);
- if (confs_noffset < 0) {
- debug("Can't get configurations parent node '%s' (%s)\n",
- FIT_CONFS_PATH, fdt_strerror(confs_noffset));
- return;
- }
-
- /* get default configuration unit name from default property */
- uname = (char *)fdt_getprop(fit, noffset, FIT_DEFAULT_PROP, NULL);
- if (uname)
- printf("%s Default Configuration: '%s'\n", p, uname);
-
- /* Process its subnodes, print out configurations details */
- for (ndepth = 0, count = 0,
- noffset = fdt_next_node(fit, confs_noffset, &ndepth);
- (noffset >= 0) && (ndepth > 0);
- noffset = fdt_next_node(fit, noffset, &ndepth)) {
- if (ndepth == 1) {
- /*
- * Direct child node of the configurations parent node,
- * i.e. configuration node.
- */
- printf("%s Configuration %u (%s)\n", p, count++,
- fit_get_name(fit, noffset, NULL));
-
- fit_conf_print(fit, noffset, p);
- }
- }
-}
-
-/**
- * fit_image_print - prints out the FIT component image details
- * @fit: pointer to the FIT format image header
- * @image_noffset: offset of the component image node
- * @p: pointer to prefix string
- *
- * fit_image_print() lists all mandatory properies for the processed component
- * image. If present, hash nodes are printed out as well. Load
- * address for images of type firmware is also printed out. Since the load
- * address is not mandatory for firmware images, it will be output as
- * "unavailable" when not present.
- *
- * returns:
- * no returned results
- */
-void fit_image_print(const void *fit, int image_noffset, const char *p)
-{
- char *desc;
- uint8_t type, arch, os, comp;
- size_t size;
- ulong load, entry;
- const void *data;
- int noffset;
- int ndepth;
+ ulong of_size = images->ft_len;
+ char **of_flat_tree = &images->ft_addr;
+ ulong *initrd_start = &images->initrd_start;
+ ulong *initrd_end = &images->initrd_end;
+ struct lmb *lmb = &images->lmb;
+ ulong rd_len;
int ret;
- /* Mandatory properties */
- ret = fit_get_desc(fit, image_noffset, &desc);
- printf("%s Description: ", p);
- if (ret)
- printf("unavailable\n");
- else
- printf("%s\n", desc);
+ if (IMAGE_ENABLE_OF_LIBFDT)
+ boot_fdt_add_mem_rsv_regions(lmb, *of_flat_tree);
- fit_image_get_type(fit, image_noffset, &type);
- printf("%s Type: %s\n", p, genimg_get_type_name(type));
-
- fit_image_get_comp(fit, image_noffset, &comp);
- printf("%s Compression: %s\n", p, genimg_get_comp_name(comp));
-
- ret = fit_image_get_data(fit, image_noffset, &data, &size);
-
-#ifndef USE_HOSTCC
- printf("%s Data Start: ", p);
- if (ret)
- printf("unavailable\n");
- else
- printf("0x%08lx\n", (ulong)data);
-#endif
-
- printf("%s Data Size: ", p);
- if (ret)
- printf("unavailable\n");
- else
- genimg_print_size(size);
-
- /* Remaining, type dependent properties */
- if ((type == IH_TYPE_KERNEL) || (type == IH_TYPE_STANDALONE) ||
- (type == IH_TYPE_RAMDISK) || (type == IH_TYPE_FIRMWARE) ||
- (type == IH_TYPE_FLATDT)) {
- fit_image_get_arch(fit, image_noffset, &arch);
- printf("%s Architecture: %s\n", p, genimg_get_arch_name(arch));
+ if (IMAGE_BOOT_GET_CMDLINE) {
+ ret = boot_get_cmdline(lmb, &images->cmdline_start,
+ &images->cmdline_end);
+ if (ret) {
+ puts("ERROR with allocation of cmdline\n");
+ return ret;
+ }
}
-
- if ((type == IH_TYPE_KERNEL) || (type == IH_TYPE_RAMDISK)) {
- fit_image_get_os(fit, image_noffset, &os);
- printf("%s OS: %s\n", p, genimg_get_os_name(os));
- }
-
- if ((type == IH_TYPE_KERNEL) || (type == IH_TYPE_STANDALONE) ||
- (type == IH_TYPE_FIRMWARE) || (type == IH_TYPE_RAMDISK)) {
- ret = fit_image_get_load(fit, image_noffset, &load);
- printf("%s Load Address: ", p);
+ if (IMAGE_ENABLE_RAMDISK_HIGH) {
+ rd_len = images->rd_end - images->rd_start;
+ ret = boot_ramdisk_high(lmb, images->rd_start, rd_len,
+ initrd_start, initrd_end);
if (ret)
- printf("unavailable\n");
- else
- printf("0x%08lx\n", load);
+ return ret;
}
- if ((type == IH_TYPE_KERNEL) || (type == IH_TYPE_STANDALONE) ||
- (type == IH_TYPE_RAMDISK)) {
- fit_image_get_entry(fit, image_noffset, &entry);
- printf("%s Entry Point: ", p);
+ if (IMAGE_ENABLE_OF_LIBFDT) {
+ ret = boot_relocate_fdt(lmb, of_flat_tree, &of_size);
if (ret)
- printf("unavailable\n");
- else
- printf("0x%08lx\n", entry);
+ return ret;
}
- /* Process all hash subnodes of the component image node */
- for (ndepth = 0, noffset = fdt_next_node(fit, image_noffset, &ndepth);
- (noffset >= 0) && (ndepth > 0);
- noffset = fdt_next_node(fit, noffset, &ndepth)) {
- if (ndepth == 1) {
- /* Direct child node of the component image node */
- fit_image_print_hash(fit, noffset, p);
- }
- }
-}
-
-/**
- * fit_image_print_hash - prints out the hash node details
- * @fit: pointer to the FIT format image header
- * @noffset: offset of the hash node
- * @p: pointer to prefix string
- *
- * fit_image_print_hash() lists properies for the processed hash node
- *
- * returns:
- * no returned results
- */
-void fit_image_print_hash(const void *fit, int noffset, const char *p)
-{
- char *algo;
- uint8_t *value;
- int value_len;
- int i, ret;
-
- /*
- * Check subnode name, must be equal to "hash".
- * Multiple hash nodes require unique unit node
- * names, e.g. hash@1, hash@2, etc.
- */
- if (strncmp(fit_get_name(fit, noffset, NULL),
- FIT_HASH_NODENAME,
- strlen(FIT_HASH_NODENAME)) != 0)
- return;
-
- debug("%s Hash node: '%s'\n", p,
- fit_get_name(fit, noffset, NULL));
-
- printf("%s Hash algo: ", p);
- if (fit_image_hash_get_algo(fit, noffset, &algo)) {
- printf("invalid/unsupported\n");
- return;
- }
- printf("%s\n", algo);
-
- ret = fit_image_hash_get_value(fit, noffset, &value,
- &value_len);
- printf("%s Hash value: ", p);
- if (ret) {
- printf("unavailable\n");
- } else {
- for (i = 0; i < value_len; i++)
- printf("%02x", value[i]);
- printf("\n");
- }
-
- debug("%s Hash len: %d\n", p, value_len);
-}
-
-/**
- * fit_get_desc - get node description property
- * @fit: pointer to the FIT format image header
- * @noffset: node offset
- * @desc: double pointer to the char, will hold pointer to the descrption
- *
- * fit_get_desc() reads description property from a given node, if
- * description is found pointer to it is returened in third call argument.
- *
- * returns:
- * 0, on success
- * -1, on failure
- */
-int fit_get_desc(const void *fit, int noffset, char **desc)
-{
- int len;
-
- *desc = (char *)fdt_getprop(fit, noffset, FIT_DESC_PROP, &len);
- if (*desc == NULL) {
- fit_get_debug(fit, noffset, FIT_DESC_PROP, len);
- return -1;
+ if (IMAGE_ENABLE_OF_LIBFDT && of_size) {
+ ret = image_setup_libfdt(images, *of_flat_tree, of_size, lmb);
+ if (ret)
+ return ret;
}
return 0;
}
-
-/**
- * fit_get_timestamp - get node timestamp property
- * @fit: pointer to the FIT format image header
- * @noffset: node offset
- * @timestamp: pointer to the time_t, will hold read timestamp
- *
- * fit_get_timestamp() reads timestamp poperty from given node, if timestamp
- * is found and has a correct size its value is retured in third call
- * argument.
- *
- * returns:
- * 0, on success
- * -1, on property read failure
- * -2, on wrong timestamp size
- */
-int fit_get_timestamp(const void *fit, int noffset, time_t *timestamp)
-{
- int len;
- const void *data;
-
- data = fdt_getprop(fit, noffset, FIT_TIMESTAMP_PROP, &len);
- if (data == NULL) {
- fit_get_debug(fit, noffset, FIT_TIMESTAMP_PROP, len);
- return -1;
- }
- if (len != sizeof(uint32_t)) {
- debug("FIT timestamp with incorrect size of (%u)\n", len);
- return -2;
- }
-
- *timestamp = uimage_to_cpu(*((uint32_t *)data));
- return 0;
-}
-
-/**
- * fit_image_get_node - get node offset for component image of a given unit name
- * @fit: pointer to the FIT format image header
- * @image_uname: component image node unit name
- *
- * fit_image_get_node() finds a component image (withing the '/images'
- * node) of a provided unit name. If image is found its node offset is
- * returned to the caller.
- *
- * returns:
- * image node offset when found (>=0)
- * negative number on failure (FDT_ERR_* code)
- */
-int fit_image_get_node(const void *fit, const char *image_uname)
-{
- int noffset, images_noffset;
-
- images_noffset = fdt_path_offset(fit, FIT_IMAGES_PATH);
- if (images_noffset < 0) {
- debug("Can't find images parent node '%s' (%s)\n",
- FIT_IMAGES_PATH, fdt_strerror(images_noffset));
- return images_noffset;
- }
-
- noffset = fdt_subnode_offset(fit, images_noffset, image_uname);
- if (noffset < 0) {
- debug("Can't get node offset for image unit name: '%s' (%s)\n",
- image_uname, fdt_strerror(noffset));
- }
-
- return noffset;
-}
-
-/**
- * fit_image_get_os - get os id for a given component image node
- * @fit: pointer to the FIT format image header
- * @noffset: component image node offset
- * @os: pointer to the uint8_t, will hold os numeric id
- *
- * fit_image_get_os() finds os property in a given component image node.
- * If the property is found, its (string) value is translated to the numeric
- * id which is returned to the caller.
- *
- * returns:
- * 0, on success
- * -1, on failure
- */
-int fit_image_get_os(const void *fit, int noffset, uint8_t *os)
-{
- int len;
- const void *data;
-
- /* Get OS name from property data */
- data = fdt_getprop(fit, noffset, FIT_OS_PROP, &len);
- if (data == NULL) {
- fit_get_debug(fit, noffset, FIT_OS_PROP, len);
- *os = -1;
- return -1;
- }
-
- /* Translate OS name to id */
- *os = genimg_get_os_id(data);
- return 0;
-}
-
-/**
- * fit_image_get_arch - get arch id for a given component image node
- * @fit: pointer to the FIT format image header
- * @noffset: component image node offset
- * @arch: pointer to the uint8_t, will hold arch numeric id
- *
- * fit_image_get_arch() finds arch property in a given component image node.
- * If the property is found, its (string) value is translated to the numeric
- * id which is returned to the caller.
- *
- * returns:
- * 0, on success
- * -1, on failure
- */
-int fit_image_get_arch(const void *fit, int noffset, uint8_t *arch)
-{
- int len;
- const void *data;
-
- /* Get architecture name from property data */
- data = fdt_getprop(fit, noffset, FIT_ARCH_PROP, &len);
- if (data == NULL) {
- fit_get_debug(fit, noffset, FIT_ARCH_PROP, len);
- *arch = -1;
- return -1;
- }
-
- /* Translate architecture name to id */
- *arch = genimg_get_arch_id(data);
- return 0;
-}
-
-/**
- * fit_image_get_type - get type id for a given component image node
- * @fit: pointer to the FIT format image header
- * @noffset: component image node offset
- * @type: pointer to the uint8_t, will hold type numeric id
- *
- * fit_image_get_type() finds type property in a given component image node.
- * If the property is found, its (string) value is translated to the numeric
- * id which is returned to the caller.
- *
- * returns:
- * 0, on success
- * -1, on failure
- */
-int fit_image_get_type(const void *fit, int noffset, uint8_t *type)
-{
- int len;
- const void *data;
-
- /* Get image type name from property data */
- data = fdt_getprop(fit, noffset, FIT_TYPE_PROP, &len);
- if (data == NULL) {
- fit_get_debug(fit, noffset, FIT_TYPE_PROP, len);
- *type = -1;
- return -1;
- }
-
- /* Translate image type name to id */
- *type = genimg_get_type_id(data);
- return 0;
-}
-
-/**
- * fit_image_get_comp - get comp id for a given component image node
- * @fit: pointer to the FIT format image header
- * @noffset: component image node offset
- * @comp: pointer to the uint8_t, will hold comp numeric id
- *
- * fit_image_get_comp() finds comp property in a given component image node.
- * If the property is found, its (string) value is translated to the numeric
- * id which is returned to the caller.
- *
- * returns:
- * 0, on success
- * -1, on failure
- */
-int fit_image_get_comp(const void *fit, int noffset, uint8_t *comp)
-{
- int len;
- const void *data;
-
- /* Get compression name from property data */
- data = fdt_getprop(fit, noffset, FIT_COMP_PROP, &len);
- if (data == NULL) {
- fit_get_debug(fit, noffset, FIT_COMP_PROP, len);
- *comp = -1;
- return -1;
- }
-
- /* Translate compression name to id */
- *comp = genimg_get_comp_id(data);
- return 0;
-}
-
-/**
- * fit_image_get_load - get load address property for a given component image node
- * @fit: pointer to the FIT format image header
- * @noffset: component image node offset
- * @load: pointer to the uint32_t, will hold load address
- *
- * fit_image_get_load() finds load address property in a given component image node.
- * If the property is found, its value is returned to the caller.
- *
- * returns:
- * 0, on success
- * -1, on failure
- */
-int fit_image_get_load(const void *fit, int noffset, ulong *load)
-{
- int len;
- const uint32_t *data;
-
- data = fdt_getprop(fit, noffset, FIT_LOAD_PROP, &len);
- if (data == NULL) {
- fit_get_debug(fit, noffset, FIT_LOAD_PROP, len);
- return -1;
- }
-
- *load = uimage_to_cpu(*data);
- return 0;
-}
-
-/**
- * fit_image_get_entry - get entry point address property for a given component image node
- * @fit: pointer to the FIT format image header
- * @noffset: component image node offset
- * @entry: pointer to the uint32_t, will hold entry point address
- *
- * fit_image_get_entry() finds entry point address property in a given component image node.
- * If the property is found, its value is returned to the caller.
- *
- * returns:
- * 0, on success
- * -1, on failure
- */
-int fit_image_get_entry(const void *fit, int noffset, ulong *entry)
-{
- int len;
- const uint32_t *data;
-
- data = fdt_getprop(fit, noffset, FIT_ENTRY_PROP, &len);
- if (data == NULL) {
- fit_get_debug(fit, noffset, FIT_ENTRY_PROP, len);
- return -1;
- }
-
- *entry = uimage_to_cpu(*data);
- return 0;
-}
-
-/**
- * fit_image_get_data - get data property and its size for a given component image node
- * @fit: pointer to the FIT format image header
- * @noffset: component image node offset
- * @data: double pointer to void, will hold data property's data address
- * @size: pointer to size_t, will hold data property's data size
- *
- * fit_image_get_data() finds data property in a given component image node.
- * If the property is found its data start address and size are returned to
- * the caller.
- *
- * returns:
- * 0, on success
- * -1, on failure
- */
-int fit_image_get_data(const void *fit, int noffset,
- const void **data, size_t *size)
-{
- int len;
-
- *data = fdt_getprop(fit, noffset, FIT_DATA_PROP, &len);
- if (*data == NULL) {
- fit_get_debug(fit, noffset, FIT_DATA_PROP, len);
- *size = 0;
- return -1;
- }
-
- *size = len;
- return 0;
-}
-
-/**
- * fit_image_hash_get_algo - get hash algorithm name
- * @fit: pointer to the FIT format image header
- * @noffset: hash node offset
- * @algo: double pointer to char, will hold pointer to the algorithm name
- *
- * fit_image_hash_get_algo() finds hash algorithm property in a given hash node.
- * If the property is found its data start address is returned to the caller.
- *
- * returns:
- * 0, on success
- * -1, on failure
- */
-int fit_image_hash_get_algo(const void *fit, int noffset, char **algo)
-{
- int len;
-
- *algo = (char *)fdt_getprop(fit, noffset, FIT_ALGO_PROP, &len);
- if (*algo == NULL) {
- fit_get_debug(fit, noffset, FIT_ALGO_PROP, len);
- return -1;
- }
-
- return 0;
-}
-
-/**
- * fit_image_hash_get_value - get hash value and length
- * @fit: pointer to the FIT format image header
- * @noffset: hash node offset
- * @value: double pointer to uint8_t, will hold address of a hash value data
- * @value_len: pointer to an int, will hold hash data length
- *
- * fit_image_hash_get_value() finds hash value property in a given hash node.
- * If the property is found its data start address and size are returned to
- * the caller.
- *
- * returns:
- * 0, on success
- * -1, on failure
- */
-int fit_image_hash_get_value(const void *fit, int noffset, uint8_t **value,
- int *value_len)
-{
- int len;
-
- *value = (uint8_t *)fdt_getprop(fit, noffset, FIT_VALUE_PROP, &len);
- if (*value == NULL) {
- fit_get_debug(fit, noffset, FIT_VALUE_PROP, len);
- *value_len = 0;
- return -1;
- }
-
- *value_len = len;
- return 0;
-}
-
-#ifndef USE_HOSTCC
-/**
- * fit_image_hash_get_ignore - get hash ignore flag
- * @fit: pointer to the FIT format image header
- * @noffset: hash node offset
- * @ignore: pointer to an int, will hold hash ignore flag
- *
- * fit_image_hash_get_ignore() finds hash ignore property in a given hash node.
- * If the property is found and non-zero, the hash algorithm is not verified by
- * u-boot automatically.
- *
- * returns:
- * 0, on ignore not found
- * value, on ignore found
- */
-int fit_image_hash_get_ignore(const void *fit, int noffset, int *ignore)
-{
- int len;
- int *value;
-
- value = (int *)fdt_getprop(fit, noffset, FIT_IGNORE_PROP, &len);
- if (value == NULL || len != sizeof(int))
- *ignore = 0;
- else
- *ignore = *value;
-
- return 0;
-}
-#endif
-
-/**
- * fit_set_timestamp - set node timestamp property
- * @fit: pointer to the FIT format image header
- * @noffset: node offset
- * @timestamp: timestamp value to be set
- *
- * fit_set_timestamp() attempts to set timestamp property in the requested
- * node and returns operation status to the caller.
- *
- * returns:
- * 0, on success
- * -1, on property read failure
- */
-int fit_set_timestamp(void *fit, int noffset, time_t timestamp)
-{
- uint32_t t;
- int ret;
-
- t = cpu_to_uimage(timestamp);
- ret = fdt_setprop(fit, noffset, FIT_TIMESTAMP_PROP, &t,
- sizeof(uint32_t));
- if (ret) {
- printf("Can't set '%s' property for '%s' node (%s)\n",
- FIT_TIMESTAMP_PROP, fit_get_name(fit, noffset, NULL),
- fdt_strerror(ret));
- return -1;
- }
-
- return 0;
-}
-
-/**
- * calculate_hash - calculate and return hash for provided input data
- * @data: pointer to the input data
- * @data_len: data length
- * @algo: requested hash algorithm
- * @value: pointer to the char, will hold hash value data (caller must
- * allocate enough free space)
- * value_len: length of the calculated hash
- *
- * calculate_hash() computes input data hash according to the requested algorithm.
- * Resulting hash value is placed in caller provided 'value' buffer, length
- * of the calculated hash is returned via value_len pointer argument.
- *
- * returns:
- * 0, on success
- * -1, when algo is unsupported
- */
-static int calculate_hash(const void *data, int data_len, const char *algo,
- uint8_t *value, int *value_len)
-{
- if (strcmp(algo, "crc32") == 0) {
- *((uint32_t *)value) = crc32_wd(0, data, data_len,
- CHUNKSZ_CRC32);
- *((uint32_t *)value) = cpu_to_uimage(*((uint32_t *)value));
- *value_len = 4;
- } else if (strcmp(algo, "sha1") == 0) {
- sha1_csum_wd((unsigned char *) data, data_len,
- (unsigned char *) value, CHUNKSZ_SHA1);
- *value_len = 20;
- } else if (strcmp(algo, "md5") == 0) {
- md5_wd((unsigned char *)data, data_len, value, CHUNKSZ_MD5);
- *value_len = 16;
- } else {
- debug("Unsupported hash alogrithm\n");
- return -1;
- }
- return 0;
-}
-
-#ifdef USE_HOSTCC
-/**
- * fit_set_hashes - process FIT component image nodes and calculate hashes
- * @fit: pointer to the FIT format image header
- *
- * fit_set_hashes() adds hash values for all component images in the FIT blob.
- * Hashes are calculated for all component images which have hash subnodes
- * with algorithm property set to one of the supported hash algorithms.
- *
- * returns
- * 0, on success
- * libfdt error code, on failure
- */
-int fit_set_hashes(void *fit)
-{
- int images_noffset;
- int noffset;
- int ndepth;
- int ret;
-
- /* Find images parent node offset */
- images_noffset = fdt_path_offset(fit, FIT_IMAGES_PATH);
- if (images_noffset < 0) {
- printf("Can't find images parent node '%s' (%s)\n",
- FIT_IMAGES_PATH, fdt_strerror(images_noffset));
- return images_noffset;
- }
-
- /* Process its subnodes, print out component images details */
- for (ndepth = 0, noffset = fdt_next_node(fit, images_noffset, &ndepth);
- (noffset >= 0) && (ndepth > 0);
- noffset = fdt_next_node(fit, noffset, &ndepth)) {
- if (ndepth == 1) {
- /*
- * Direct child node of the images parent node,
- * i.e. component image node.
- */
- ret = fit_image_set_hashes(fit, noffset);
- if (ret)
- return ret;
- }
- }
-
- return 0;
-}
-
-/**
- * fit_image_set_hashes - calculate/set hashes for given component image node
- * @fit: pointer to the FIT format image header
- * @image_noffset: requested component image node
- *
- * fit_image_set_hashes() adds hash values for an component image node. All
- * existing hash subnodes are checked, if algorithm property is set to one of
- * the supported hash algorithms, hash value is computed and corresponding
- * hash node property is set, for example:
- *
- * Input component image node structure:
- *
- * o image@1 (at image_noffset)
- * | - data = [binary data]
- * o hash@1
- * |- algo = "sha1"
- *
- * Output component image node structure:
- *
- * o image@1 (at image_noffset)
- * | - data = [binary data]
- * o hash@1
- * |- algo = "sha1"
- * |- value = sha1(data)
- *
- * returns:
- * 0 on sucess
- * <0 on failure
- */
-int fit_image_set_hashes(void *fit, int image_noffset)
-{
- const void *data;
- size_t size;
- char *algo;
- uint8_t value[FIT_MAX_HASH_LEN];
- int value_len;
- int noffset;
- int ndepth;
-
- /* Get image data and data length */
- if (fit_image_get_data(fit, image_noffset, &data, &size)) {
- printf("Can't get image data/size\n");
- return -1;
- }
-
- /* Process all hash subnodes of the component image node */
- for (ndepth = 0, noffset = fdt_next_node(fit, image_noffset, &ndepth);
- (noffset >= 0) && (ndepth > 0);
- noffset = fdt_next_node(fit, noffset, &ndepth)) {
- if (ndepth == 1) {
- /* Direct child node of the component image node */
-
- /*
- * Check subnode name, must be equal to "hash".
- * Multiple hash nodes require unique unit node
- * names, e.g. hash@1, hash@2, etc.
- */
- if (strncmp(fit_get_name(fit, noffset, NULL),
- FIT_HASH_NODENAME,
- strlen(FIT_HASH_NODENAME)) != 0) {
- /* Not a hash subnode, skip it */
- continue;
- }
-
- if (fit_image_hash_get_algo(fit, noffset, &algo)) {
- printf("Can't get hash algo property for "
- "'%s' hash node in '%s' image node\n",
- fit_get_name(fit, noffset, NULL),
- fit_get_name(fit, image_noffset, NULL));
- return -1;
- }
-
- if (calculate_hash(data, size, algo, value,
- &value_len)) {
- printf("Unsupported hash algorithm (%s) for "
- "'%s' hash node in '%s' image node\n",
- algo, fit_get_name(fit, noffset, NULL),
- fit_get_name(fit, image_noffset,
- NULL));
- return -1;
- }
-
- if (fit_image_hash_set_value(fit, noffset, value,
- value_len)) {
- printf("Can't set hash value for "
- "'%s' hash node in '%s' image node\n",
- fit_get_name(fit, noffset, NULL),
- fit_get_name(fit, image_noffset, NULL));
- return -1;
- }
- }
- }
-
- return 0;
-}
-
-/**
- * fit_image_hash_set_value - set hash value in requested has node
- * @fit: pointer to the FIT format image header
- * @noffset: hash node offset
- * @value: hash value to be set
- * @value_len: hash value length
- *
- * fit_image_hash_set_value() attempts to set hash value in a node at offset
- * given and returns operation status to the caller.
- *
- * returns
- * 0, on success
- * -1, on failure
- */
-int fit_image_hash_set_value(void *fit, int noffset, uint8_t *value,
- int value_len)
-{
- int ret;
-
- ret = fdt_setprop(fit, noffset, FIT_VALUE_PROP, value, value_len);
- if (ret) {
- printf("Can't set hash '%s' property for '%s' node(%s)\n",
- FIT_VALUE_PROP, fit_get_name(fit, noffset, NULL),
- fdt_strerror(ret));
- return -1;
- }
-
- return 0;
-}
-#endif /* USE_HOSTCC */
-
-/**
- * fit_image_check_hashes - verify data intergity
- * @fit: pointer to the FIT format image header
- * @image_noffset: component image node offset
- *
- * fit_image_check_hashes() goes over component image hash nodes,
- * re-calculates each data hash and compares with the value stored in hash
- * node.
- *
- * returns:
- * 1, if all hashes are valid
- * 0, otherwise (or on error)
- */
-int fit_image_check_hashes(const void *fit, int image_noffset)
-{
- const void *data;
- size_t size;
- char *algo;
- uint8_t *fit_value;
- int fit_value_len;
-#ifndef USE_HOSTCC
- int ignore;
-#endif
- uint8_t value[FIT_MAX_HASH_LEN];
- int value_len;
- int noffset;
- int ndepth;
- char *err_msg = "";
-
- /* Get image data and data length */
- if (fit_image_get_data(fit, image_noffset, &data, &size)) {
- printf("Can't get image data/size\n");
- return 0;
- }
-
- /* Process all hash subnodes of the component image node */
- for (ndepth = 0, noffset = fdt_next_node(fit, image_noffset, &ndepth);
- (noffset >= 0) && (ndepth > 0);
- noffset = fdt_next_node(fit, noffset, &ndepth)) {
- if (ndepth == 1) {
- /* Direct child node of the component image node */
-
- /*
- * Check subnode name, must be equal to "hash".
- * Multiple hash nodes require unique unit node
- * names, e.g. hash@1, hash@2, etc.
- */
- if (strncmp(fit_get_name(fit, noffset, NULL),
- FIT_HASH_NODENAME,
- strlen(FIT_HASH_NODENAME)) != 0)
- continue;
-
- if (fit_image_hash_get_algo(fit, noffset, &algo)) {
- err_msg = " error!\nCan't get hash algo "
- "property";
- goto error;
- }
- printf("%s", algo);
-
-#ifndef USE_HOSTCC
- fit_image_hash_get_ignore(fit, noffset, &ignore);
- if (ignore) {
- printf("-skipped ");
- continue;
- }
-#endif
-
- if (fit_image_hash_get_value(fit, noffset, &fit_value,
- &fit_value_len)) {
- err_msg = " error!\nCan't get hash value "
- "property";
- goto error;
- }
-
- if (calculate_hash(data, size, algo, value,
- &value_len)) {
- err_msg = " error!\n"
- "Unsupported hash algorithm";
- goto error;
- }
-
- if (value_len != fit_value_len) {
- err_msg = " error !\nBad hash value len";
- goto error;
- } else if (memcmp(value, fit_value, value_len) != 0) {
- err_msg = " error!\nBad hash value";
- goto error;
- }
- printf("+ ");
- }
- }
-
- if (noffset == -FDT_ERR_TRUNCATED || noffset == -FDT_ERR_BADSTRUCTURE) {
- err_msg = " error!\nCorrupted or truncated tree";
- goto error;
- }
-
- return 1;
-
-error:
- printf("%s for '%s' hash node in '%s' image node\n",
- err_msg, fit_get_name(fit, noffset, NULL),
- fit_get_name(fit, image_noffset, NULL));
- return 0;
-}
-
-/**
- * fit_all_image_check_hashes - verify data intergity for all images
- * @fit: pointer to the FIT format image header
- *
- * fit_all_image_check_hashes() goes over all images in the FIT and
- * for every images checks if all it's hashes are valid.
- *
- * returns:
- * 1, if all hashes of all images are valid
- * 0, otherwise (or on error)
- */
-int fit_all_image_check_hashes(const void *fit)
-{
- int images_noffset;
- int noffset;
- int ndepth;
- int count;
-
- /* Find images parent node offset */
- images_noffset = fdt_path_offset(fit, FIT_IMAGES_PATH);
- if (images_noffset < 0) {
- printf("Can't find images parent node '%s' (%s)\n",
- FIT_IMAGES_PATH, fdt_strerror(images_noffset));
- return 0;
- }
-
- /* Process all image subnodes, check hashes for each */
- printf("## Checking hash(es) for FIT Image at %08lx ...\n",
- (ulong)fit);
- for (ndepth = 0, count = 0,
- noffset = fdt_next_node(fit, images_noffset, &ndepth);
- (noffset >= 0) && (ndepth > 0);
- noffset = fdt_next_node(fit, noffset, &ndepth)) {
- if (ndepth == 1) {
- /*
- * Direct child node of the images parent node,
- * i.e. component image node.
- */
- printf(" Hash(es) for Image %u (%s): ", count++,
- fit_get_name(fit, noffset, NULL));
-
- if (!fit_image_check_hashes(fit, noffset))
- return 0;
- printf("\n");
- }
- }
- return 1;
-}
-
-/**
- * fit_image_check_os - check whether image node is of a given os type
- * @fit: pointer to the FIT format image header
- * @noffset: component image node offset
- * @os: requested image os
- *
- * fit_image_check_os() reads image os property and compares its numeric
- * id with the requested os. Comparison result is returned to the caller.
- *
- * returns:
- * 1 if image is of given os type
- * 0 otherwise (or on error)
- */
-int fit_image_check_os(const void *fit, int noffset, uint8_t os)
-{
- uint8_t image_os;
-
- if (fit_image_get_os(fit, noffset, &image_os))
- return 0;
- return (os == image_os);
-}
-
-/**
- * fit_image_check_arch - check whether image node is of a given arch
- * @fit: pointer to the FIT format image header
- * @noffset: component image node offset
- * @arch: requested imagearch
- *
- * fit_image_check_arch() reads image arch property and compares its numeric
- * id with the requested arch. Comparison result is returned to the caller.
- *
- * returns:
- * 1 if image is of given arch
- * 0 otherwise (or on error)
- */
-int fit_image_check_arch(const void *fit, int noffset, uint8_t arch)
-{
- uint8_t image_arch;
-
- if (fit_image_get_arch(fit, noffset, &image_arch))
- return 0;
- return (arch == image_arch);
-}
-
-/**
- * fit_image_check_type - check whether image node is of a given type
- * @fit: pointer to the FIT format image header
- * @noffset: component image node offset
- * @type: requested image type
- *
- * fit_image_check_type() reads image type property and compares its numeric
- * id with the requested type. Comparison result is returned to the caller.
- *
- * returns:
- * 1 if image is of given type
- * 0 otherwise (or on error)
- */
-int fit_image_check_type(const void *fit, int noffset, uint8_t type)
-{
- uint8_t image_type;
-
- if (fit_image_get_type(fit, noffset, &image_type))
- return 0;
- return (type == image_type);
-}
-
-/**
- * fit_image_check_comp - check whether image node uses given compression
- * @fit: pointer to the FIT format image header
- * @noffset: component image node offset
- * @comp: requested image compression type
- *
- * fit_image_check_comp() reads image compression property and compares its
- * numeric id with the requested compression type. Comparison result is
- * returned to the caller.
- *
- * returns:
- * 1 if image uses requested compression
- * 0 otherwise (or on error)
- */
-int fit_image_check_comp(const void *fit, int noffset, uint8_t comp)
-{
- uint8_t image_comp;
-
- if (fit_image_get_comp(fit, noffset, &image_comp))
- return 0;
- return (comp == image_comp);
-}
-
-/**
- * fit_check_format - sanity check FIT image format
- * @fit: pointer to the FIT format image header
- *
- * fit_check_format() runs a basic sanity FIT image verification.
- * Routine checks for mandatory properties, nodes, etc.
- *
- * returns:
- * 1, on success
- * 0, on failure
- */
-int fit_check_format(const void *fit)
-{
- /* mandatory / node 'description' property */
- if (fdt_getprop(fit, 0, FIT_DESC_PROP, NULL) == NULL) {
- debug("Wrong FIT format: no description\n");
- return 0;
- }
-
-#if defined(CONFIG_TIMESTAMP) || defined(CONFIG_CMD_DATE) || defined(USE_HOSTCC)
- /* mandatory / node 'timestamp' property */
- if (fdt_getprop(fit, 0, FIT_TIMESTAMP_PROP, NULL) == NULL) {
- debug("Wrong FIT format: no timestamp\n");
- return 0;
- }
-#endif
-
- /* mandatory subimages parent '/images' node */
- if (fdt_path_offset(fit, FIT_IMAGES_PATH) < 0) {
- debug("Wrong FIT format: no images parent node\n");
- return 0;
- }
-
- return 1;
-}
-
-
-/**
- * fit_conf_find_compat
- * @fit: pointer to the FIT format image header
- * @fdt: pointer to the device tree to compare against
- *
- * fit_conf_find_compat() attempts to find the configuration whose fdt is the
- * most compatible with the passed in device tree.
- *
- * Example:
- *
- * / o image-tree
- * |-o images
- * | |-o fdt@1
- * | |-o fdt@2
- * |
- * |-o configurations
- * |-o config@1
- * | |-fdt = fdt@1
- * |
- * |-o config@2
- * |-fdt = fdt@2
- *
- * / o U-Boot fdt
- * |-compatible = "foo,bar", "bim,bam"
- *
- * / o kernel fdt1
- * |-compatible = "foo,bar",
- *
- * / o kernel fdt2
- * |-compatible = "bim,bam", "baz,biz"
- *
- * Configuration 1 would be picked because the first string in U-Boot's
- * compatible list, "foo,bar", matches a compatible string in the root of fdt1.
- * "bim,bam" in fdt2 matches the second string which isn't as good as fdt1.
- *
- * returns:
- * offset to the configuration to use if one was found
- * -1 otherwise
- */
-int fit_conf_find_compat(const void *fit, const void *fdt)
-{
- int ndepth = 0;
- int noffset, confs_noffset, images_noffset;
- const void *fdt_compat;
- int fdt_compat_len;
- int best_match_offset = 0;
- int best_match_pos = 0;
-
- confs_noffset = fdt_path_offset(fit, FIT_CONFS_PATH);
- images_noffset = fdt_path_offset(fit, FIT_IMAGES_PATH);
- if (confs_noffset < 0 || images_noffset < 0) {
- debug("Can't find configurations or images nodes.\n");
- return -1;
- }
-
- fdt_compat = fdt_getprop(fdt, 0, "compatible", &fdt_compat_len);
- if (!fdt_compat) {
- debug("Fdt for comparison has no \"compatible\" property.\n");
- return -1;
- }
-
- /*
- * Loop over the configurations in the FIT image.
- */
- for (noffset = fdt_next_node(fit, confs_noffset, &ndepth);
- (noffset >= 0) && (ndepth > 0);
- noffset = fdt_next_node(fit, noffset, &ndepth)) {
- const void *kfdt;
- const char *kfdt_name;
- int kfdt_noffset;
- const char *cur_fdt_compat;
- int len;
- size_t size;
- int i;
-
- if (ndepth > 1)
- continue;
-
- kfdt_name = fdt_getprop(fit, noffset, "fdt", &len);
- if (!kfdt_name) {
- debug("No fdt property found.\n");
- continue;
- }
- kfdt_noffset = fdt_subnode_offset(fit, images_noffset,
- kfdt_name);
- if (kfdt_noffset < 0) {
- debug("No image node named \"%s\" found.\n",
- kfdt_name);
- continue;
- }
- /*
- * Get a pointer to this configuration's fdt.
- */
- if (fit_image_get_data(fit, kfdt_noffset, &kfdt, &size)) {
- debug("Failed to get fdt \"%s\".\n", kfdt_name);
- continue;
- }
-
- len = fdt_compat_len;
- cur_fdt_compat = fdt_compat;
- /*
- * Look for a match for each U-Boot compatibility string in
- * turn in this configuration's fdt.
- */
- for (i = 0; len > 0 &&
- (!best_match_offset || best_match_pos > i); i++) {
- int cur_len = strlen(cur_fdt_compat) + 1;
-
- if (!fdt_node_check_compatible(kfdt, 0,
- cur_fdt_compat)) {
- best_match_offset = noffset;
- best_match_pos = i;
- break;
- }
- len -= cur_len;
- cur_fdt_compat += cur_len;
- }
- }
- if (!best_match_offset) {
- debug("No match found.\n");
- return -1;
- }
-
- return best_match_offset;
-}
-
-/**
- * fit_conf_get_node - get node offset for configuration of a given unit name
- * @fit: pointer to the FIT format image header
- * @conf_uname: configuration node unit name
- *
- * fit_conf_get_node() finds a configuration (withing the '/configurations'
- * parant node) of a provided unit name. If configuration is found its node offset
- * is returned to the caller.
- *
- * When NULL is provided in second argument fit_conf_get_node() will search
- * for a default configuration node instead. Default configuration node unit name
- * is retrived from FIT_DEFAULT_PROP property of the '/configurations' node.
- *
- * returns:
- * configuration node offset when found (>=0)
- * negative number on failure (FDT_ERR_* code)
- */
-int fit_conf_get_node(const void *fit, const char *conf_uname)
-{
- int noffset, confs_noffset;
- int len;
-
- confs_noffset = fdt_path_offset(fit, FIT_CONFS_PATH);
- if (confs_noffset < 0) {
- debug("Can't find configurations parent node '%s' (%s)\n",
- FIT_CONFS_PATH, fdt_strerror(confs_noffset));
- return confs_noffset;
- }
-
- if (conf_uname == NULL) {
- /* get configuration unit name from the default property */
- debug("No configuration specified, trying default...\n");
- conf_uname = (char *)fdt_getprop(fit, confs_noffset,
- FIT_DEFAULT_PROP, &len);
- if (conf_uname == NULL) {
- fit_get_debug(fit, confs_noffset, FIT_DEFAULT_PROP,
- len);
- return len;
- }
- debug("Found default configuration: '%s'\n", conf_uname);
- }
-
- noffset = fdt_subnode_offset(fit, confs_noffset, conf_uname);
- if (noffset < 0) {
- debug("Can't get node offset for configuration unit name: "
- "'%s' (%s)\n",
- conf_uname, fdt_strerror(noffset));
- }
-
- return noffset;
-}
-
-static int __fit_conf_get_prop_node(const void *fit, int noffset,
- const char *prop_name)
-{
- char *uname;
- int len;
-
- /* get kernel image unit name from configuration kernel property */
- uname = (char *)fdt_getprop(fit, noffset, prop_name, &len);
- if (uname == NULL)
- return len;
-
- return fit_image_get_node(fit, uname);
-}
-
-/**
- * fit_conf_get_kernel_node - get kernel image node offset that corresponds to
- * a given configuration
- * @fit: pointer to the FIT format image header
- * @noffset: configuration node offset
- *
- * fit_conf_get_kernel_node() retrives kernel image node unit name from
- * configuration FIT_KERNEL_PROP property and translates it to the node
- * offset.
- *
- * returns:
- * image node offset when found (>=0)
- * negative number on failure (FDT_ERR_* code)
- */
-int fit_conf_get_kernel_node(const void *fit, int noffset)
-{
- return __fit_conf_get_prop_node(fit, noffset, FIT_KERNEL_PROP);
-}
-
-/**
- * fit_conf_get_ramdisk_node - get ramdisk image node offset that corresponds to
- * a given configuration
- * @fit: pointer to the FIT format image header
- * @noffset: configuration node offset
- *
- * fit_conf_get_ramdisk_node() retrives ramdisk image node unit name from
- * configuration FIT_KERNEL_PROP property and translates it to the node
- * offset.
- *
- * returns:
- * image node offset when found (>=0)
- * negative number on failure (FDT_ERR_* code)
- */
-int fit_conf_get_ramdisk_node(const void *fit, int noffset)
-{
- return __fit_conf_get_prop_node(fit, noffset, FIT_RAMDISK_PROP);
-}
-
-/**
- * fit_conf_get_fdt_node - get fdt image node offset that corresponds to
- * a given configuration
- * @fit: pointer to the FIT format image header
- * @noffset: configuration node offset
- *
- * fit_conf_get_fdt_node() retrives fdt image node unit name from
- * configuration FIT_KERNEL_PROP property and translates it to the node
- * offset.
- *
- * returns:
- * image node offset when found (>=0)
- * negative number on failure (FDT_ERR_* code)
- */
-int fit_conf_get_fdt_node(const void *fit, int noffset)
-{
- return __fit_conf_get_prop_node(fit, noffset, FIT_FDT_PROP);
-}
-
-/**
- * fit_conf_print - prints out the FIT configuration details
- * @fit: pointer to the FIT format image header
- * @noffset: offset of the configuration node
- * @p: pointer to prefix string
- *
- * fit_conf_print() lists all mandatory properies for the processed
- * configuration node.
- *
- * returns:
- * no returned results
- */
-void fit_conf_print(const void *fit, int noffset, const char *p)
-{
- char *desc;
- char *uname;
- int ret;
-
- /* Mandatory properties */
- ret = fit_get_desc(fit, noffset, &desc);
- printf("%s Description: ", p);
- if (ret)
- printf("unavailable\n");
- else
- printf("%s\n", desc);
-
- uname = (char *)fdt_getprop(fit, noffset, FIT_KERNEL_PROP, NULL);
- printf("%s Kernel: ", p);
- if (uname == NULL)
- printf("unavailable\n");
- else
- printf("%s\n", uname);
-
- /* Optional properties */
- uname = (char *)fdt_getprop(fit, noffset, FIT_RAMDISK_PROP, NULL);
- if (uname)
- printf("%s Init Ramdisk: %s\n", p, uname);
-
- uname = (char *)fdt_getprop(fit, noffset, FIT_FDT_PROP, NULL);
- if (uname)
- printf("%s FDT: %s\n", p, uname);
-}
-
-/**
- * fit_check_ramdisk - verify FIT format ramdisk subimage
- * @fit_hdr: pointer to the FIT ramdisk header
- * @rd_noffset: ramdisk subimage node offset within FIT image
- * @arch: requested ramdisk image architecture type
- * @verify: data CRC verification flag
- *
- * fit_check_ramdisk() verifies integrity of the ramdisk subimage and from
- * specified FIT image.
- *
- * returns:
- * 1, on success
- * 0, on failure
- */
-#ifndef USE_HOSTCC
-static int fit_check_ramdisk(const void *fit, int rd_noffset, uint8_t arch,
- int verify)
-{
- fit_image_print(fit, rd_noffset, " ");
-
- if (verify) {
- puts(" Verifying Hash Integrity ... ");
- if (!fit_image_check_hashes(fit, rd_noffset)) {
- puts("Bad Data Hash\n");
- bootstage_error(BOOTSTAGE_ID_FIT_RD_HASH);
- return 0;
- }
- puts("OK\n");
- }
-
- bootstage_mark(BOOTSTAGE_ID_FIT_RD_CHECK_ALL);
- if (!fit_image_check_os(fit, rd_noffset, IH_OS_LINUX) ||
- !fit_image_check_arch(fit, rd_noffset, arch) ||
- !fit_image_check_type(fit, rd_noffset, IH_TYPE_RAMDISK)) {
- printf("No Linux %s Ramdisk Image\n",
- genimg_get_arch_name(arch));
- bootstage_error(BOOTSTAGE_ID_FIT_RD_CHECK_ALL);
- return 0;
- }
-
- bootstage_mark(BOOTSTAGE_ID_FIT_RD_CHECK_ALL_OK);
- return 1;
-}
-#endif /* USE_HOSTCC */
-#endif /* CONFIG_FIT */
+#endif /* CONFIG_LMB */
+#endif /* !USE_HOSTCC */
diff --git a/common/spl/Makefile b/common/spl/Makefile
index da2afc1..a74563c 100644
--- a/common/spl/Makefile
+++ b/common/spl/Makefile
@@ -20,6 +20,7 @@
COBJS-$(CONFIG_SPL_NAND_SUPPORT) += spl_nand.o
COBJS-$(CONFIG_SPL_ONENAND_SUPPORT) += spl_onenand.o
COBJS-$(CONFIG_SPL_NET_SUPPORT) += spl_net.o
+COBJS-$(CONFIG_SPL_MMC_SUPPORT) += spl_mmc.o
endif
COBJS := $(sort $(COBJS-y))
diff --git a/drivers/mmc/spl_mmc.c b/common/spl/spl_mmc.c
similarity index 100%
rename from drivers/mmc/spl_mmc.c
rename to common/spl/spl_mmc.c
diff --git a/common/update.c b/common/update.c
index 94d6a82..87941ec 100644
--- a/common/update.c
+++ b/common/update.c
@@ -297,7 +297,7 @@
printf("Processing update '%s' :",
fit_get_name(fit, noffset, NULL));
- if (!fit_image_check_hashes(fit, noffset)) {
+ if (!fit_image_verify(fit, noffset)) {
printf("Error: invalid update hash, aborting\n");
ret = 1;
goto next_node;
diff --git a/common/usb.c b/common/usb.c
index 6fc0fc1..55fff5b 100644
--- a/common/usb.c
+++ b/common/usb.c
@@ -57,17 +57,6 @@
#include <asm/4xx_pci.h>
#endif
-#ifdef DEBUG
-#define USB_DEBUG 1
-#define USB_HUB_DEBUG 1
-#else
-#define USB_DEBUG 0
-#define USB_HUB_DEBUG 0
-#endif
-
-#define USB_PRINTF(fmt, args...) debug_cond(USB_DEBUG, fmt, ##args)
-#define USB_HUB_PRINTF(fmt, args...) debug_cond(USB_HUB_DEBUG, fmt, ##args)
-
#define USB_BUFSIZ 512
static struct usb_device usb_dev[USB_MAX_DEVICE];
@@ -130,7 +119,7 @@
usb_started = 1;
}
- USB_PRINTF("scan end\n");
+ debug("scan end\n");
/* if we were not able to find at least one working bus, bail out */
if (!usb_started) {
puts("USB error: all controllers failed lowlevel init\n");
@@ -216,9 +205,9 @@
setup_packet->value = cpu_to_le16(value);
setup_packet->index = cpu_to_le16(index);
setup_packet->length = cpu_to_le16(size);
- USB_PRINTF("usb_control_msg: request: 0x%X, requesttype: 0x%X, " \
- "value 0x%X index 0x%X length 0x%X\n",
- request, requesttype, value, index, size);
+ debug("usb_control_msg: request: 0x%X, requesttype: 0x%X, " \
+ "value 0x%X index 0x%X length 0x%X\n",
+ request, requesttype, value, index, size);
dev->status = USB_ST_NOT_PROC; /*not yet processed */
if (submit_control_msg(dev, pipe, data, size, setup_packet) < 0)
@@ -314,22 +303,22 @@
/* Control => bidirectional */
dev->epmaxpacketout[b] = ep_wMaxPacketSize;
dev->epmaxpacketin[b] = ep_wMaxPacketSize;
- USB_PRINTF("##Control EP epmaxpacketout/in[%d] = %d\n",
- b, dev->epmaxpacketin[b]);
+ debug("##Control EP epmaxpacketout/in[%d] = %d\n",
+ b, dev->epmaxpacketin[b]);
} else {
if ((ep->bEndpointAddress & 0x80) == 0) {
/* OUT Endpoint */
if (ep_wMaxPacketSize > dev->epmaxpacketout[b]) {
dev->epmaxpacketout[b] = ep_wMaxPacketSize;
- USB_PRINTF("##EP epmaxpacketout[%d] = %d\n",
- b, dev->epmaxpacketout[b]);
+ debug("##EP epmaxpacketout[%d] = %d\n",
+ b, dev->epmaxpacketout[b]);
}
} else {
/* IN Endpoint */
if (ep_wMaxPacketSize > dev->epmaxpacketin[b]) {
dev->epmaxpacketin[b] = ep_wMaxPacketSize;
- USB_PRINTF("##EP epmaxpacketin[%d] = %d\n",
- b, dev->epmaxpacketin[b]);
+ debug("##EP epmaxpacketin[%d] = %d\n",
+ b, dev->epmaxpacketin[b]);
}
} /* if out */
} /* if control */
@@ -358,8 +347,8 @@
{
struct usb_descriptor_header *head;
int index, ifno, epno, curr_if_num;
- int i;
u16 ep_wMaxPacketSize;
+ struct usb_interface *if_desc = NULL;
ifno = -1;
epno = -1;
@@ -387,23 +376,27 @@
&buffer[index])->bInterfaceNumber != curr_if_num) {
/* this is a new interface, copy new desc */
ifno = dev->config.no_of_if;
+ if_desc = &dev->config.if_desc[ifno];
dev->config.no_of_if++;
- memcpy(&dev->config.if_desc[ifno],
- &buffer[index], buffer[index]);
- dev->config.if_desc[ifno].no_of_ep = 0;
- dev->config.if_desc[ifno].num_altsetting = 1;
+ memcpy(if_desc, &buffer[index], buffer[index]);
+ if_desc->no_of_ep = 0;
+ if_desc->num_altsetting = 1;
curr_if_num =
- dev->config.if_desc[ifno].desc.bInterfaceNumber;
+ if_desc->desc.bInterfaceNumber;
} else {
/* found alternate setting for the interface */
- dev->config.if_desc[ifno].num_altsetting++;
+ if (ifno >= 0) {
+ if_desc = &dev->config.if_desc[ifno];
+ if_desc->num_altsetting++;
+ }
}
break;
case USB_DT_ENDPOINT:
epno = dev->config.if_desc[ifno].no_of_ep;
+ if_desc = &dev->config.if_desc[ifno];
/* found an endpoint */
- dev->config.if_desc[ifno].no_of_ep++;
- memcpy(&dev->config.if_desc[ifno].ep_desc[epno],
+ if_desc->no_of_ep++;
+ memcpy(&if_desc->ep_desc[epno],
&buffer[index], buffer[index]);
ep_wMaxPacketSize = get_unaligned(&dev->config.\
if_desc[ifno].\
@@ -414,23 +407,30 @@
if_desc[ifno].\
ep_desc[epno].\
wMaxPacketSize);
- USB_PRINTF("if %d, ep %d\n", ifno, epno);
+ debug("if %d, ep %d\n", ifno, epno);
+ break;
+ case USB_DT_SS_ENDPOINT_COMP:
+ if_desc = &dev->config.if_desc[ifno];
+ memcpy(&if_desc->ss_ep_comp_desc[epno],
+ &buffer[index], buffer[index]);
break;
default:
if (head->bLength == 0)
return 1;
- USB_PRINTF("unknown Description Type : %x\n",
- head->bDescriptorType);
+ debug("unknown Description Type : %x\n",
+ head->bDescriptorType);
+#ifdef DEBUG
{
-#ifdef USB_DEBUG
unsigned char *ch = (unsigned char *)head;
-#endif
+ int i;
+
for (i = 0; i < head->bLength; i++)
- USB_PRINTF("%02X ", *ch++);
- USB_PRINTF("\n\n\n");
+ debug("%02X ", *ch++);
+ debug("\n\n\n");
}
+#endif
break;
}
index += head->bLength;
@@ -514,8 +514,7 @@
}
result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno, buffer, tmp);
- USB_PRINTF("get_conf_no %d Result %d, wLength %d\n",
- cfgno, result, tmp);
+ debug("get_conf_no %d Result %d, wLength %d\n", cfgno, result, tmp);
return result;
}
@@ -527,7 +526,7 @@
{
int res;
- USB_PRINTF("set address %d\n", dev->devnum);
+ debug("set address %d\n", dev->devnum);
res = usb_control_msg(dev, usb_snddefctrl(dev),
USB_REQ_SET_ADDRESS, 0,
(dev->devnum), 0,
@@ -579,7 +578,7 @@
static int usb_set_configuration(struct usb_device *dev, int configuration)
{
int res;
- USB_PRINTF("set configuration %d\n", configuration);
+ debug("set configuration %d\n", configuration);
/* set setup command */
res = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
USB_REQ_SET_CONFIGURATION, 0,
@@ -731,19 +730,19 @@
if (!dev->have_langid) {
err = usb_string_sub(dev, 0, 0, tbuf);
if (err < 0) {
- USB_PRINTF("error getting string descriptor 0 " \
- "(error=%lx)\n", dev->status);
+ debug("error getting string descriptor 0 " \
+ "(error=%lx)\n", dev->status);
return -1;
} else if (tbuf[0] < 4) {
- USB_PRINTF("string descriptor 0 too short\n");
+ debug("string descriptor 0 too short\n");
return -1;
} else {
dev->have_langid = -1;
dev->string_langid = tbuf[2] | (tbuf[3] << 8);
/* always use the first langid listed */
- USB_PRINTF("USB device number %d default " \
- "language ID 0x%x\n",
- dev->devnum, dev->string_langid);
+ debug("USB device number %d default " \
+ "language ID 0x%x\n",
+ dev->devnum, dev->string_langid);
}
}
@@ -789,7 +788,7 @@
struct usb_device *usb_alloc_new_device(void *controller)
{
int i;
- USB_PRINTF("New Device %d\n", dev_index);
+ debug("New Device %d\n", dev_index);
if (dev_index == USB_MAX_DEVICE) {
printf("ERROR, too many USB Devices, max=%d\n", USB_MAX_DEVICE);
return NULL;
@@ -813,7 +812,7 @@
void usb_free_device(void)
{
dev_index--;
- USB_PRINTF("Freeing device node: %d\n", dev_index);
+ debug("Freeing device node: %d\n", dev_index);
memset(&usb_dev[dev_index], 0, sizeof(struct usb_device));
usb_dev[dev_index].devnum = -1;
}
@@ -880,11 +879,16 @@
err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, desc, 64);
if (err < 0) {
- USB_PRINTF("usb_new_device: usb_get_descriptor() failed\n");
+ debug("usb_new_device: usb_get_descriptor() failed\n");
return 1;
}
dev->descriptor.bMaxPacketSize0 = desc->bMaxPacketSize0;
+ /*
+ * Fetch the device class, driver can use this info
+ * to differentiate between HUB and DEVICE.
+ */
+ dev->descriptor.bDeviceClass = desc->bDeviceClass;
/* find the port number we're at */
if (parent) {
@@ -973,9 +977,9 @@
"len %d, status %lX\n", dev->act_len, dev->status);
return -1;
}
- USB_PRINTF("new device strings: Mfr=%d, Product=%d, SerialNumber=%d\n",
- dev->descriptor.iManufacturer, dev->descriptor.iProduct,
- dev->descriptor.iSerialNumber);
+ debug("new device strings: Mfr=%d, Product=%d, SerialNumber=%d\n",
+ dev->descriptor.iManufacturer, dev->descriptor.iProduct,
+ dev->descriptor.iSerialNumber);
memset(dev->mf, 0, sizeof(dev->mf));
memset(dev->prod, 0, sizeof(dev->prod));
memset(dev->serial, 0, sizeof(dev->serial));
@@ -988,9 +992,9 @@
if (dev->descriptor.iSerialNumber)
usb_string(dev, dev->descriptor.iSerialNumber,
dev->serial, sizeof(dev->serial));
- USB_PRINTF("Manufacturer %s\n", dev->mf);
- USB_PRINTF("Product %s\n", dev->prod);
- USB_PRINTF("SerialNumber %s\n", dev->serial);
+ debug("Manufacturer %s\n", dev->mf);
+ debug("Product %s\n", dev->prod);
+ debug("SerialNumber %s\n", dev->serial);
/* now prode if the device is a hub */
usb_hub_probe(dev, 0);
return 0;
diff --git a/common/usb_hub.c b/common/usb_hub.c
index b5eeb62..0d79ec3 100644
--- a/common/usb_hub.c
+++ b/common/usb_hub.c
@@ -53,17 +53,6 @@
#include <asm/4xx_pci.h>
#endif
-#ifdef DEBUG
-#define USB_DEBUG 1
-#define USB_HUB_DEBUG 1
-#else
-#define USB_DEBUG 0
-#define USB_HUB_DEBUG 0
-#endif
-
-#define USB_PRINTF(fmt, args...) debug_cond(USB_DEBUG, fmt, ##args)
-#define USB_HUB_PRINTF(fmt, args...) debug_cond(USB_HUB_DEBUG, fmt, ##args)
-
#define USB_BUFSIZ 512
static struct usb_hub_device hub_dev[USB_MAX_HUB];
@@ -111,13 +100,52 @@
int i;
struct usb_device *dev;
unsigned pgood_delay = hub->desc.bPwrOn2PwrGood * 2;
+ ALLOC_CACHE_ALIGN_BUFFER(struct usb_port_status, portsts, 1);
+ unsigned short portstatus;
+ int ret;
dev = hub->pusb_dev;
- /* Enable power to the ports */
- USB_HUB_PRINTF("enabling power on all ports\n");
+
+ /*
+ * Enable power to the ports:
+ * Here we Power-cycle the ports: aka,
+ * turning them off and turning on again.
+ */
+ debug("enabling power on all ports\n");
+ for (i = 0; i < dev->maxchild; i++) {
+ usb_clear_port_feature(dev, i + 1, USB_PORT_FEAT_POWER);
+ debug("port %d returns %lX\n", i + 1, dev->status);
+ }
+
+ /* Wait at least 2*bPwrOn2PwrGood for PP to change */
+ mdelay(pgood_delay);
+
+ for (i = 0; i < dev->maxchild; i++) {
+ ret = usb_get_port_status(dev, i + 1, portsts);
+ if (ret < 0) {
+ debug("port %d: get_port_status failed\n", i + 1);
+ return;
+ }
+
+ /*
+ * Check to confirm the state of Port Power:
+ * xHCI says "After modifying PP, s/w shall read
+ * PP and confirm that it has reached the desired state
+ * before modifying it again, undefined behavior may occur
+ * if this procedure is not followed".
+ * EHCI doesn't say anything like this, but no harm in keeping
+ * this.
+ */
+ portstatus = le16_to_cpu(portsts->wPortStatus);
+ if (portstatus & (USB_PORT_STAT_POWER << 1)) {
+ debug("port %d: Port power change failed\n", i + 1);
+ return;
+ }
+ }
+
for (i = 0; i < dev->maxchild; i++) {
usb_set_port_feature(dev, i + 1, USB_PORT_FEAT_POWER);
- USB_HUB_PRINTF("port %d returns %lX\n", i + 1, dev->status);
+ debug("port %d returns %lX\n", i + 1, dev->status);
}
/* Wait at least 100 msec for power to become stable */
@@ -142,12 +170,24 @@
static inline char *portspeed(int portstatus)
{
- if (portstatus & (1 << USB_PORT_FEAT_HIGHSPEED))
- return "480 Mb/s";
- else if (portstatus & (1 << USB_PORT_FEAT_LOWSPEED))
- return "1.5 Mb/s";
- else
- return "12 Mb/s";
+ char *speed_str;
+
+ switch (portstatus & USB_PORT_STAT_SPEED_MASK) {
+ case USB_PORT_STAT_SUPER_SPEED:
+ speed_str = "5 Gb/s";
+ break;
+ case USB_PORT_STAT_HIGH_SPEED:
+ speed_str = "480 Mb/s";
+ break;
+ case USB_PORT_STAT_LOW_SPEED:
+ speed_str = "1.5 Mb/s";
+ break;
+ default:
+ speed_str = "12 Mb/s";
+ break;
+ }
+
+ return speed_str;
}
int hub_port_reset(struct usb_device *dev, int port,
@@ -157,29 +197,28 @@
ALLOC_CACHE_ALIGN_BUFFER(struct usb_port_status, portsts, 1);
unsigned short portstatus, portchange;
- USB_HUB_PRINTF("hub_port_reset: resetting port %d...\n", port);
+ debug("hub_port_reset: resetting port %d...\n", port);
for (tries = 0; tries < MAX_TRIES; tries++) {
usb_set_port_feature(dev, port + 1, USB_PORT_FEAT_RESET);
mdelay(200);
if (usb_get_port_status(dev, port + 1, portsts) < 0) {
- USB_HUB_PRINTF("get_port_status failed status %lX\n",
- dev->status);
+ debug("get_port_status failed status %lX\n",
+ dev->status);
return -1;
}
portstatus = le16_to_cpu(portsts->wPortStatus);
portchange = le16_to_cpu(portsts->wPortChange);
- USB_HUB_PRINTF("portstatus %x, change %x, %s\n",
- portstatus, portchange,
- portspeed(portstatus));
+ debug("portstatus %x, change %x, %s\n", portstatus, portchange,
+ portspeed(portstatus));
- USB_HUB_PRINTF("STAT_C_CONNECTION = %d STAT_CONNECTION = %d" \
- " USB_PORT_STAT_ENABLE %d\n",
- (portchange & USB_PORT_STAT_C_CONNECTION) ? 1 : 0,
- (portstatus & USB_PORT_STAT_CONNECTION) ? 1 : 0,
- (portstatus & USB_PORT_STAT_ENABLE) ? 1 : 0);
+ debug("STAT_C_CONNECTION = %d STAT_CONNECTION = %d" \
+ " USB_PORT_STAT_ENABLE %d\n",
+ (portchange & USB_PORT_STAT_C_CONNECTION) ? 1 : 0,
+ (portstatus & USB_PORT_STAT_CONNECTION) ? 1 : 0,
+ (portstatus & USB_PORT_STAT_ENABLE) ? 1 : 0);
if ((portchange & USB_PORT_STAT_C_CONNECTION) ||
!(portstatus & USB_PORT_STAT_CONNECTION))
@@ -192,9 +231,9 @@
}
if (tries == MAX_TRIES) {
- USB_HUB_PRINTF("Cannot enable port %i after %i retries, " \
- "disabling port.\n", port + 1, MAX_TRIES);
- USB_HUB_PRINTF("Maybe the USB cable is bad?\n");
+ debug("Cannot enable port %i after %i retries, " \
+ "disabling port.\n", port + 1, MAX_TRIES);
+ debug("Maybe the USB cable is bad?\n");
return -1;
}
@@ -212,15 +251,15 @@
/* Check status */
if (usb_get_port_status(dev, port + 1, portsts) < 0) {
- USB_HUB_PRINTF("get_port_status failed\n");
+ debug("get_port_status failed\n");
return;
}
portstatus = le16_to_cpu(portsts->wPortStatus);
- USB_HUB_PRINTF("portstatus %x, change %x, %s\n",
- portstatus,
- le16_to_cpu(portsts->wPortChange),
- portspeed(portstatus));
+ debug("portstatus %x, change %x, %s\n",
+ portstatus,
+ le16_to_cpu(portsts->wPortChange),
+ portspeed(portstatus));
/* Clear the connection change status */
usb_clear_port_feature(dev, port + 1, USB_PORT_FEAT_C_CONNECTION);
@@ -228,7 +267,7 @@
/* Disconnect any existing devices under this port */
if (((!(portstatus & USB_PORT_STAT_CONNECTION)) &&
(!(portstatus & USB_PORT_STAT_ENABLE))) || (dev->children[port])) {
- USB_HUB_PRINTF("usb_disconnect(&hub->children[port]);\n");
+ debug("usb_disconnect(&hub->children[port]);\n");
/* Return now if nothing is connected */
if (!(portstatus & USB_PORT_STAT_CONNECTION))
return;
@@ -246,12 +285,20 @@
/* Allocate a new device struct for it */
usb = usb_alloc_new_device(dev->controller);
- if (portstatus & USB_PORT_STAT_HIGH_SPEED)
+ switch (portstatus & USB_PORT_STAT_SPEED_MASK) {
+ case USB_PORT_STAT_SUPER_SPEED:
+ usb->speed = USB_SPEED_SUPER;
+ break;
+ case USB_PORT_STAT_HIGH_SPEED:
usb->speed = USB_SPEED_HIGH;
- else if (portstatus & USB_PORT_STAT_LOW_SPEED)
+ break;
+ case USB_PORT_STAT_LOW_SPEED:
usb->speed = USB_SPEED_LOW;
- else
+ break;
+ default:
usb->speed = USB_SPEED_FULL;
+ break;
+ }
dev->children[port] = usb;
usb->parent = dev;
@@ -261,7 +308,7 @@
/* Woops, disable the port */
usb_free_device();
dev->children[port] = NULL;
- USB_HUB_PRINTF("hub: disabling port %d\n", port + 1);
+ debug("hub: disabling port %d\n", port + 1);
usb_clear_port_feature(dev, port + 1, USB_PORT_FEAT_ENABLE);
}
}
@@ -275,9 +322,7 @@
short hubCharacteristics;
struct usb_hub_descriptor *descriptor;
struct usb_hub_device *hub;
-#ifdef USB_HUB_DEBUG
- struct usb_hub_status *hubsts;
-#endif
+ __maybe_unused struct usb_hub_status *hubsts;
/* "allocate" Hub device */
hub = usb_hub_allocate();
@@ -286,8 +331,8 @@
hub->pusb_dev = dev;
/* Get the the hub descriptor */
if (usb_get_hub_descriptor(dev, buffer, 4) < 0) {
- USB_HUB_PRINTF("usb_hub_configure: failed to get hub " \
- "descriptor, giving up %lX\n", dev->status);
+ debug("usb_hub_configure: failed to get hub " \
+ "descriptor, giving up %lX\n", dev->status);
return -1;
}
descriptor = (struct usb_hub_descriptor *)buffer;
@@ -295,15 +340,14 @@
/* silence compiler warning if USB_BUFSIZ is > 256 [= sizeof(char)] */
i = descriptor->bLength;
if (i > USB_BUFSIZ) {
- USB_HUB_PRINTF("usb_hub_configure: failed to get hub " \
- "descriptor - too long: %d\n",
- descriptor->bLength);
+ debug("usb_hub_configure: failed to get hub " \
+ "descriptor - too long: %d\n", descriptor->bLength);
return -1;
}
if (usb_get_hub_descriptor(dev, buffer, descriptor->bLength) < 0) {
- USB_HUB_PRINTF("usb_hub_configure: failed to get hub " \
- "descriptor 2nd giving up %lX\n", dev->status);
+ debug("usb_hub_configure: failed to get hub " \
+ "descriptor 2nd giving up %lX\n", dev->status);
return -1;
}
memcpy((unsigned char *)&hub->desc, buffer, descriptor->bLength);
@@ -325,74 +369,75 @@
hub->desc.PortPowerCtrlMask[i] = descriptor->PortPowerCtrlMask[i];
dev->maxchild = descriptor->bNbrPorts;
- USB_HUB_PRINTF("%d ports detected\n", dev->maxchild);
+ debug("%d ports detected\n", dev->maxchild);
hubCharacteristics = get_unaligned(&hub->desc.wHubCharacteristics);
switch (hubCharacteristics & HUB_CHAR_LPSM) {
case 0x00:
- USB_HUB_PRINTF("ganged power switching\n");
+ debug("ganged power switching\n");
break;
case 0x01:
- USB_HUB_PRINTF("individual port power switching\n");
+ debug("individual port power switching\n");
break;
case 0x02:
case 0x03:
- USB_HUB_PRINTF("unknown reserved power switching mode\n");
+ debug("unknown reserved power switching mode\n");
break;
}
if (hubCharacteristics & HUB_CHAR_COMPOUND)
- USB_HUB_PRINTF("part of a compound device\n");
+ debug("part of a compound device\n");
else
- USB_HUB_PRINTF("standalone hub\n");
+ debug("standalone hub\n");
switch (hubCharacteristics & HUB_CHAR_OCPM) {
case 0x00:
- USB_HUB_PRINTF("global over-current protection\n");
+ debug("global over-current protection\n");
break;
case 0x08:
- USB_HUB_PRINTF("individual port over-current protection\n");
+ debug("individual port over-current protection\n");
break;
case 0x10:
case 0x18:
- USB_HUB_PRINTF("no over-current protection\n");
+ debug("no over-current protection\n");
break;
}
- USB_HUB_PRINTF("power on to power good time: %dms\n",
- descriptor->bPwrOn2PwrGood * 2);
- USB_HUB_PRINTF("hub controller current requirement: %dmA\n",
- descriptor->bHubContrCurrent);
+ debug("power on to power good time: %dms\n",
+ descriptor->bPwrOn2PwrGood * 2);
+ debug("hub controller current requirement: %dmA\n",
+ descriptor->bHubContrCurrent);
for (i = 0; i < dev->maxchild; i++)
- USB_HUB_PRINTF("port %d is%s removable\n", i + 1,
- hub->desc.DeviceRemovable[(i + 1) / 8] & \
- (1 << ((i + 1) % 8)) ? " not" : "");
+ debug("port %d is%s removable\n", i + 1,
+ hub->desc.DeviceRemovable[(i + 1) / 8] & \
+ (1 << ((i + 1) % 8)) ? " not" : "");
if (sizeof(struct usb_hub_status) > USB_BUFSIZ) {
- USB_HUB_PRINTF("usb_hub_configure: failed to get Status - " \
- "too long: %d\n", descriptor->bLength);
+ debug("usb_hub_configure: failed to get Status - " \
+ "too long: %d\n", descriptor->bLength);
return -1;
}
if (usb_get_hub_status(dev, buffer) < 0) {
- USB_HUB_PRINTF("usb_hub_configure: failed to get Status %lX\n",
- dev->status);
+ debug("usb_hub_configure: failed to get Status %lX\n",
+ dev->status);
return -1;
}
-#ifdef USB_HUB_DEBUG
+#ifdef DEBUG
hubsts = (struct usb_hub_status *)buffer;
#endif
- USB_HUB_PRINTF("get_hub_status returned status %X, change %X\n",
- le16_to_cpu(hubsts->wHubStatus),
- le16_to_cpu(hubsts->wHubChange));
- USB_HUB_PRINTF("local power source is %s\n",
- (le16_to_cpu(hubsts->wHubStatus) & HUB_STATUS_LOCAL_POWER) ? \
- "lost (inactive)" : "good");
- USB_HUB_PRINTF("%sover-current condition exists\n",
- (le16_to_cpu(hubsts->wHubStatus) & HUB_STATUS_OVERCURRENT) ? \
- "" : "no ");
+
+ debug("get_hub_status returned status %X, change %X\n",
+ le16_to_cpu(hubsts->wHubStatus),
+ le16_to_cpu(hubsts->wHubChange));
+ debug("local power source is %s\n",
+ (le16_to_cpu(hubsts->wHubStatus) & HUB_STATUS_LOCAL_POWER) ? \
+ "lost (inactive)" : "good");
+ debug("%sover-current condition exists\n",
+ (le16_to_cpu(hubsts->wHubStatus) & HUB_STATUS_OVERCURRENT) ? \
+ "" : "no ");
usb_hub_power_on(hub);
for (i = 0; i < dev->maxchild; i++) {
@@ -412,7 +457,7 @@
do {
ret = usb_get_port_status(dev, i + 1, portsts);
if (ret < 0) {
- USB_HUB_PRINTF("get_port_status failed\n");
+ debug("get_port_status failed\n");
break;
}
@@ -423,22 +468,21 @@
(portstatus & USB_PORT_STAT_CONNECTION))
break;
- mdelay(100);
} while (get_timer(start) < CONFIG_SYS_HZ * 10);
if (ret < 0)
continue;
- USB_HUB_PRINTF("Port %d Status %X Change %X\n",
- i + 1, portstatus, portchange);
+ debug("Port %d Status %X Change %X\n",
+ i + 1, portstatus, portchange);
if (portchange & USB_PORT_STAT_C_CONNECTION) {
- USB_HUB_PRINTF("port %d connection change\n", i + 1);
+ debug("port %d connection change\n", i + 1);
usb_hub_port_connect_change(dev, i);
}
if (portchange & USB_PORT_STAT_C_ENABLE) {
- USB_HUB_PRINTF("port %d enable change, status %x\n",
- i + 1, portstatus);
+ debug("port %d enable change, status %x\n",
+ i + 1, portstatus);
usb_clear_port_feature(dev, i + 1,
USB_PORT_FEAT_C_ENABLE);
@@ -448,27 +492,27 @@
if (!(portstatus & USB_PORT_STAT_ENABLE) &&
(portstatus & USB_PORT_STAT_CONNECTION) &&
((dev->children[i]))) {
- USB_HUB_PRINTF("already running port %i " \
- "disabled by hub (EMI?), " \
- "re-enabling...\n", i + 1);
- usb_hub_port_connect_change(dev, i);
+ debug("already running port %i " \
+ "disabled by hub (EMI?), " \
+ "re-enabling...\n", i + 1);
+ usb_hub_port_connect_change(dev, i);
}
}
if (portstatus & USB_PORT_STAT_SUSPEND) {
- USB_HUB_PRINTF("port %d suspend change\n", i + 1);
+ debug("port %d suspend change\n", i + 1);
usb_clear_port_feature(dev, i + 1,
USB_PORT_FEAT_SUSPEND);
}
if (portchange & USB_PORT_STAT_C_OVERCURRENT) {
- USB_HUB_PRINTF("port %d over-current change\n", i + 1);
+ debug("port %d over-current change\n", i + 1);
usb_clear_port_feature(dev, i + 1,
USB_PORT_FEAT_C_OVER_CURRENT);
usb_hub_power_on(hub);
}
if (portchange & USB_PORT_STAT_C_RESET) {
- USB_HUB_PRINTF("port %d reset change\n", i + 1);
+ debug("port %d reset change\n", i + 1);
usb_clear_port_feature(dev, i + 1,
USB_PORT_FEAT_C_RESET);
}
@@ -503,7 +547,7 @@
if ((ep->bmAttributes & 3) != 3)
return 0;
/* We found a hub */
- USB_HUB_PRINTF("USB hub found\n");
+ debug("USB hub found\n");
ret = usb_hub_configure(dev);
return ret;
}
diff --git a/common/usb_kbd.c b/common/usb_kbd.c
index 4efbcfe..b962849 100644
--- a/common/usb_kbd.c
+++ b/common/usb_kbd.c
@@ -31,12 +31,6 @@
#include <usb.h>
-#ifdef USB_KBD_DEBUG
-#define USB_KBD_PRINTF(fmt, args...) printf(fmt, ##args)
-#else
-#define USB_KBD_PRINTF(fmt, args...)
-#endif
-
/*
* If overwrite_console returns 1, the stdin, stderr and stdout
* are switched to the serial port, else the settings in the
@@ -262,7 +256,7 @@
/* Report keycode if any */
if (keycode) {
- USB_KBD_PRINTF("%c", keycode);
+ debug("%c", keycode);
usb_kbd_put_queue(data, keycode);
}
@@ -324,8 +318,8 @@
static int usb_kbd_irq(struct usb_device *dev)
{
if ((dev->irq_status != 0) || (dev->irq_act_len != 8)) {
- USB_KBD_PRINTF("USB KBD: Error %lX, len %d\n",
- dev->irq_status, dev->irq_act_len);
+ debug("USB KBD: Error %lX, len %d\n",
+ dev->irq_status, dev->irq_act_len);
return 1;
}
@@ -437,7 +431,7 @@
if ((ep->bmAttributes & 3) != 3)
return 0;
- USB_KBD_PRINTF("USB KBD: found set protocol...\n");
+ debug("USB KBD: found set protocol...\n");
data = malloc(sizeof(struct usb_kbd_pdata));
if (!data) {
@@ -463,10 +457,10 @@
/* We found a USB Keyboard, install it. */
usb_set_protocol(dev, iface->desc.bInterfaceNumber, 0);
- USB_KBD_PRINTF("USB KBD: found set idle...\n");
+ debug("USB KBD: found set idle...\n");
usb_set_idle(dev, iface->desc.bInterfaceNumber, REPEAT_RATE, 0);
- USB_KBD_PRINTF("USB KBD: enable interrupt pipe...\n");
+ debug("USB KBD: enable interrupt pipe...\n");
usb_submit_int_msg(dev, pipe, data->new, maxp > 8 ? 8 : maxp,
ep->bInterval);
@@ -497,16 +491,16 @@
continue;
/* We found a keyboard, check if it is already registered. */
- USB_KBD_PRINTF("USB KBD: found set up device.\n");
+ debug("USB KBD: found set up device.\n");
old_dev = stdio_get_by_name(DEVNAME);
if (old_dev) {
/* Already registered, just return ok. */
- USB_KBD_PRINTF("USB KBD: is already registered.\n");
+ debug("USB KBD: is already registered.\n");
return 1;
}
/* Register the keyboard */
- USB_KBD_PRINTF("USB KBD: register.\n");
+ debug("USB KBD: register.\n");
memset(&usb_kbd_dev, 0, sizeof(struct stdio_dev));
strcpy(usb_kbd_dev.name, DEVNAME);
usb_kbd_dev.flags = DEV_FLAGS_INPUT | DEV_FLAGS_SYSTEM;
diff --git a/common/usb_storage.c b/common/usb_storage.c
index c5db044..457970f 100644
--- a/common/usb_storage.c
+++ b/common/usb_storage.c
@@ -59,14 +59,6 @@
#undef BBB_COMDAT_TRACE
#undef BBB_XPORT_TRACE
-#ifdef USB_STOR_DEBUG
-#define USB_BLK_DEBUG 1
-#else
-#define USB_BLK_DEBUG 0
-#endif
-
-#define USB_STOR_PRINTF(fmt, args...) debug_cond(USB_BLK_DEBUG, fmt, ##args)
-
#include <scsi.h>
/* direction table -- this indicates the direction of the data
* transfer for each command code -- a 1 indicates input
@@ -228,8 +220,7 @@
0, us->ifnum,
result, sizeof(char),
USB_CNTL_TIMEOUT * 5);
- USB_STOR_PRINTF("Get Max LUN -> len = %i, result = %i\n",
- len, (int) *result);
+ debug("Get Max LUN -> len = %i, result = %i\n", len, (int) *result);
return (len > 0) ? *result : 0;
}
@@ -262,7 +253,7 @@
usb_max_devs = 0;
for (i = 0; i < USB_MAX_DEVICE; i++) {
dev = usb_get_dev_index(i); /* get device */
- USB_STOR_PRINTF("i=%d\n", i);
+ debug("i=%d\n", i);
if (dev == NULL)
break; /* no more devices available */
@@ -278,9 +269,9 @@
lun++) {
usb_dev_desc[usb_max_devs].lun = lun;
if (usb_stor_get_info(dev, &usb_stor[start],
- &usb_dev_desc[usb_max_devs]) == 1) {
- usb_max_devs++;
- }
+ &usb_dev_desc[usb_max_devs]) == 1) {
+ usb_max_devs++;
+ }
}
}
/* if storage device */
@@ -309,7 +300,7 @@
}
-#ifdef USB_STOR_DEBUG
+#ifdef DEBUG
static void usb_show_srb(ccb *pccb)
{
@@ -361,45 +352,49 @@
/* set up the transfer loop */
do {
/* transfer the data */
- USB_STOR_PRINTF("Bulk xfer 0x%x(%d) try #%d\n",
- (unsigned int)buf, this_xfer, 11 - maxtry);
+ debug("Bulk xfer 0x%x(%d) try #%d\n",
+ (unsigned int)buf, this_xfer, 11 - maxtry);
result = usb_bulk_msg(us->pusb_dev, pipe, buf,
this_xfer, &partial,
USB_CNTL_TIMEOUT * 5);
- USB_STOR_PRINTF("bulk_msg returned %d xferred %d/%d\n",
- result, partial, this_xfer);
+ debug("bulk_msg returned %d xferred %d/%d\n",
+ result, partial, this_xfer);
if (us->pusb_dev->status != 0) {
/* if we stall, we need to clear it before
* we go on
*/
-#ifdef USB_STOR_DEBUG
+#ifdef DEBUG
display_int_status(us->pusb_dev->status);
#endif
if (us->pusb_dev->status & USB_ST_STALLED) {
- USB_STOR_PRINTF("stalled ->clearing endpoint halt for pipe 0x%x\n", pipe);
+ debug("stalled ->clearing endpoint" \
+ "halt for pipe 0x%x\n", pipe);
stat = us->pusb_dev->status;
usb_clear_halt(us->pusb_dev, pipe);
us->pusb_dev->status = stat;
if (this_xfer == partial) {
- USB_STOR_PRINTF("bulk transferred with error %lX, but data ok\n", us->pusb_dev->status);
+ debug("bulk transferred" \
+ "with error %lX," \
+ " but data ok\n",
+ us->pusb_dev->status);
return 0;
}
else
return result;
}
if (us->pusb_dev->status & USB_ST_NAK_REC) {
- USB_STOR_PRINTF("Device NAKed bulk_msg\n");
+ debug("Device NAKed bulk_msg\n");
return result;
}
- USB_STOR_PRINTF("bulk transferred with error");
+ debug("bulk transferred with error");
if (this_xfer == partial) {
- USB_STOR_PRINTF(" %ld, but data ok\n",
- us->pusb_dev->status);
+ debug(" %ld, but data ok\n",
+ us->pusb_dev->status);
return 0;
}
/* if our try counter reaches 0, bail out */
- USB_STOR_PRINTF(" %ld, data %d\n",
- us->pusb_dev->status, partial);
+ debug(" %ld, data %d\n",
+ us->pusb_dev->status, partial);
if (!maxtry--)
return result;
}
@@ -433,35 +428,34 @@
*
* This comment stolen from FreeBSD's /sys/dev/usb/umass.c.
*/
- USB_STOR_PRINTF("BBB_reset\n");
+ debug("BBB_reset\n");
result = usb_control_msg(us->pusb_dev, usb_sndctrlpipe(us->pusb_dev, 0),
US_BBB_RESET,
USB_TYPE_CLASS | USB_RECIP_INTERFACE,
0, us->ifnum, NULL, 0, USB_CNTL_TIMEOUT * 5);
if ((result < 0) && (us->pusb_dev->status & USB_ST_STALLED)) {
- USB_STOR_PRINTF("RESET:stall\n");
+ debug("RESET:stall\n");
return -1;
}
/* long wait for reset */
mdelay(150);
- USB_STOR_PRINTF("BBB_reset result %d: status %lX reset\n", result,
- us->pusb_dev->status);
+ debug("BBB_reset result %d: status %lX reset\n",
+ result, us->pusb_dev->status);
pipe = usb_rcvbulkpipe(us->pusb_dev, us->ep_in);
result = usb_clear_halt(us->pusb_dev, pipe);
/* long wait for reset */
mdelay(150);
- USB_STOR_PRINTF("BBB_reset result %d: status %lX clearing IN endpoint\n",
- result, us->pusb_dev->status);
+ debug("BBB_reset result %d: status %lX clearing IN endpoint\n",
+ result, us->pusb_dev->status);
/* long wait for reset */
pipe = usb_sndbulkpipe(us->pusb_dev, us->ep_out);
result = usb_clear_halt(us->pusb_dev, pipe);
mdelay(150);
- USB_STOR_PRINTF("BBB_reset result %d: status %lX"
- " clearing OUT endpoint\n", result,
- us->pusb_dev->status);
- USB_STOR_PRINTF("BBB_reset done\n");
+ debug("BBB_reset result %d: status %lX clearing OUT endpoint\n",
+ result, us->pusb_dev->status);
+ debug("BBB_reset done\n");
return 0;
}
@@ -474,7 +468,7 @@
unsigned char cmd[12];
int result;
- USB_STOR_PRINTF("CB_reset\n");
+ debug("CB_reset\n");
memset(cmd, 0xff, sizeof(cmd));
cmd[0] = SCSI_SEND_DIAG;
cmd[1] = 4;
@@ -486,13 +480,12 @@
/* long wait for reset */
mdelay(1500);
- USB_STOR_PRINTF("CB_reset result %d: status %lX"
- " clearing endpoint halt\n", result,
- us->pusb_dev->status);
+ debug("CB_reset result %d: status %lX clearing endpoint halt\n",
+ result, us->pusb_dev->status);
usb_clear_halt(us->pusb_dev, usb_rcvbulkpipe(us->pusb_dev, us->ep_in));
usb_clear_halt(us->pusb_dev, usb_rcvbulkpipe(us->pusb_dev, us->ep_out));
- USB_STOR_PRINTF("CB_reset done\n");
+ debug("CB_reset done\n");
return 0;
}
@@ -511,7 +504,7 @@
dir_in = US_DIRECTION(srb->cmd[0]);
#ifdef BBB_COMDAT_TRACE
- printf("dir %d lun %d cmdlen %d cmd %p datalen %d pdata %p\n",
+ printf("dir %d lun %d cmdlen %d cmd %p datalen %lu pdata %p\n",
dir_in, srb->lun, srb->cmdlen, srb->cmd, srb->datalen,
srb->pdata);
if (srb->cmdlen) {
@@ -522,7 +515,7 @@
#endif
/* sanity checks */
if (!(srb->cmdlen <= CBWCDBLENGTH)) {
- USB_STOR_PRINTF("usb_stor_BBB_comdat:cmdlen too large\n");
+ debug("usb_stor_BBB_comdat:cmdlen too large\n");
return -1;
}
@@ -541,7 +534,7 @@
result = usb_bulk_msg(us->pusb_dev, pipe, cbw, UMASS_BBB_CBW_SIZE,
&actlen, USB_CNTL_TIMEOUT * 5);
if (result < 0)
- USB_STOR_PRINTF("usb_stor_BBB_comdat:usb_bulk_msg error\n");
+ debug("usb_stor_BBB_comdat:usb_bulk_msg error\n");
return result;
}
@@ -564,8 +557,8 @@
pipe = usb_sndbulkpipe(us->pusb_dev, us->ep_out);
while (retry--) {
- USB_STOR_PRINTF("CBI gets a command: Try %d\n", 5 - retry);
-#ifdef USB_STOR_DEBUG
+ debug("CBI gets a command: Try %d\n", 5 - retry);
+#ifdef DEBUG
usb_show_srb(srb);
#endif
/* let's send the command via the control pipe */
@@ -576,35 +569,35 @@
0, us->ifnum,
srb->cmd, srb->cmdlen,
USB_CNTL_TIMEOUT * 5);
- USB_STOR_PRINTF("CB_transport: control msg returned %d,"
- " status %lX\n", result, us->pusb_dev->status);
+ debug("CB_transport: control msg returned %d, status %lX\n",
+ result, us->pusb_dev->status);
/* check the return code for the command */
if (result < 0) {
if (us->pusb_dev->status & USB_ST_STALLED) {
status = us->pusb_dev->status;
- USB_STOR_PRINTF(" stall during command found,"
- " clear pipe\n");
+ debug(" stall during command found," \
+ " clear pipe\n");
usb_clear_halt(us->pusb_dev,
usb_sndctrlpipe(us->pusb_dev, 0));
us->pusb_dev->status = status;
}
- USB_STOR_PRINTF(" error during command %02X"
- " Stat = %lX\n", srb->cmd[0],
- us->pusb_dev->status);
+ debug(" error during command %02X" \
+ " Stat = %lX\n", srb->cmd[0],
+ us->pusb_dev->status);
return result;
}
/* transfer the data payload for this command, if one exists*/
- USB_STOR_PRINTF("CB_transport: control msg returned %d,"
- " direction is %s to go 0x%lx\n", result,
- dir_in ? "IN" : "OUT", srb->datalen);
+ debug("CB_transport: control msg returned %d," \
+ " direction is %s to go 0x%lx\n", result,
+ dir_in ? "IN" : "OUT", srb->datalen);
if (srb->datalen) {
result = us_one_transfer(us, pipe, (char *)srb->pdata,
srb->datalen);
- USB_STOR_PRINTF("CBI attempted to transfer data,"
- " result is %d status %lX, len %d\n",
- result, us->pusb_dev->status,
- us->pusb_dev->act_len);
+ debug("CBI attempted to transfer data," \
+ " result is %d status %lX, len %d\n",
+ result, us->pusb_dev->status,
+ us->pusb_dev->act_len);
if (!(us->pusb_dev->status & USB_ST_NAK_REC))
break;
} /* if (srb->datalen) */
@@ -635,10 +628,9 @@
us->ip_wanted = 0;
return USB_STOR_TRANSPORT_ERROR;
}
- USB_STOR_PRINTF
- ("Got interrupt data 0x%x, transfered %d status 0x%lX\n",
- us->ip_data, us->pusb_dev->irq_act_len,
- us->pusb_dev->irq_status);
+ debug("Got interrupt data 0x%x, transfered %d status 0x%lX\n",
+ us->ip_data, us->pusb_dev->irq_act_len,
+ us->pusb_dev->irq_status);
/* UFI gives us ASC and ASCQ, like a request sense */
if (us->subclass == US_SC_UFI) {
if (srb->cmd[0] == SCSI_REQ_SENSE ||
@@ -691,11 +683,11 @@
dir_in = US_DIRECTION(srb->cmd[0]);
/* COMMAND phase */
- USB_STOR_PRINTF("COMMAND phase\n");
+ debug("COMMAND phase\n");
result = usb_stor_BBB_comdat(srb, us);
if (result < 0) {
- USB_STOR_PRINTF("failed to send CBW status %ld\n",
- us->pusb_dev->status);
+ debug("failed to send CBW status %ld\n",
+ us->pusb_dev->status);
usb_stor_BBB_reset(us);
return USB_STOR_TRANSPORT_FAILED;
}
@@ -708,7 +700,7 @@
/* no data, go immediately to the STATUS phase */
if (srb->datalen == 0)
goto st;
- USB_STOR_PRINTF("DATA phase\n");
+ debug("DATA phase\n");
if (dir_in)
pipe = pipein;
else
@@ -717,7 +709,7 @@
&data_actlen, USB_CNTL_TIMEOUT * 5);
/* special handling of STALL in DATA phase */
if ((result < 0) && (us->pusb_dev->status & USB_ST_STALLED)) {
- USB_STOR_PRINTF("DATA:stall\n");
+ debug("DATA:stall\n");
/* clear the STALL on the endpoint */
result = usb_stor_BBB_clear_endpt_stall(us,
dir_in ? us->ep_in : us->ep_out);
@@ -726,8 +718,8 @@
goto st;
}
if (result < 0) {
- USB_STOR_PRINTF("usb_bulk_msg error status %ld\n",
- us->pusb_dev->status);
+ debug("usb_bulk_msg error status %ld\n",
+ us->pusb_dev->status);
usb_stor_BBB_reset(us);
return USB_STOR_TRANSPORT_FAILED;
}
@@ -740,14 +732,14 @@
st:
retry = 0;
again:
- USB_STOR_PRINTF("STATUS phase\n");
+ debug("STATUS phase\n");
result = usb_bulk_msg(us->pusb_dev, pipein, csw, UMASS_BBB_CSW_SIZE,
&actlen, USB_CNTL_TIMEOUT*5);
/* special handling of STALL in STATUS phase */
if ((result < 0) && (retry < 1) &&
(us->pusb_dev->status & USB_ST_STALLED)) {
- USB_STOR_PRINTF("STATUS:stall\n");
+ debug("STATUS:stall\n");
/* clear the STALL on the endpoint */
result = usb_stor_BBB_clear_endpt_stall(us, us->ep_in);
if (result >= 0 && (retry++ < 1))
@@ -755,8 +747,8 @@
goto again;
}
if (result < 0) {
- USB_STOR_PRINTF("usb_bulk_msg error status %ld\n",
- us->pusb_dev->status);
+ debug("usb_bulk_msg error status %ld\n",
+ us->pusb_dev->status);
usb_stor_BBB_reset(us);
return USB_STOR_TRANSPORT_FAILED;
}
@@ -771,27 +763,27 @@
if (pipe == 0 && srb->datalen != 0 && srb->datalen - data_actlen != 0)
pipe = srb->datalen - data_actlen;
if (CSWSIGNATURE != le32_to_cpu(csw->dCSWSignature)) {
- USB_STOR_PRINTF("!CSWSIGNATURE\n");
+ debug("!CSWSIGNATURE\n");
usb_stor_BBB_reset(us);
return USB_STOR_TRANSPORT_FAILED;
} else if ((CBWTag - 1) != le32_to_cpu(csw->dCSWTag)) {
- USB_STOR_PRINTF("!Tag\n");
+ debug("!Tag\n");
usb_stor_BBB_reset(us);
return USB_STOR_TRANSPORT_FAILED;
} else if (csw->bCSWStatus > CSWSTATUS_PHASE) {
- USB_STOR_PRINTF(">PHASE\n");
+ debug(">PHASE\n");
usb_stor_BBB_reset(us);
return USB_STOR_TRANSPORT_FAILED;
} else if (csw->bCSWStatus == CSWSTATUS_PHASE) {
- USB_STOR_PRINTF("=PHASE\n");
+ debug("=PHASE\n");
usb_stor_BBB_reset(us);
return USB_STOR_TRANSPORT_FAILED;
} else if (data_actlen > srb->datalen) {
- USB_STOR_PRINTF("transferred %dB instead of %ldB\n",
- data_actlen, srb->datalen);
+ debug("transferred %dB instead of %ldB\n",
+ data_actlen, srb->datalen);
return USB_STOR_TRANSPORT_FAILED;
} else if (csw->bCSWStatus == CSWSTATUS_FAILED) {
- USB_STOR_PRINTF("FAILED\n");
+ debug("FAILED\n");
return USB_STOR_TRANSPORT_FAILED;
}
@@ -812,14 +804,14 @@
/* issue the command */
do_retry:
result = usb_stor_CB_comdat(srb, us);
- USB_STOR_PRINTF("command / Data returned %d, status %lX\n",
- result, us->pusb_dev->status);
+ debug("command / Data returned %d, status %lX\n",
+ result, us->pusb_dev->status);
/* if this is an CBI Protocol, get IRQ */
if (us->protocol == US_PR_CBI) {
status = usb_stor_CBI_get_status(srb, us);
/* if the status is error, report it */
if (status == USB_STOR_TRANSPORT_ERROR) {
- USB_STOR_PRINTF(" USB CBI Command Error\n");
+ debug(" USB CBI Command Error\n");
return status;
}
srb->sense_buf[12] = (unsigned char)(us->ip_data >> 8);
@@ -827,7 +819,7 @@
if (!us->ip_data) {
/* if the status is good, report it */
if (status == USB_STOR_TRANSPORT_GOOD) {
- USB_STOR_PRINTF(" USB CBI Command Good\n");
+ debug(" USB CBI Command Good\n");
return status;
}
}
@@ -835,7 +827,7 @@
/* do we have to issue an auto request? */
/* HERE we have to check the result */
if ((result < 0) && !(us->pusb_dev->status & USB_ST_STALLED)) {
- USB_STOR_PRINTF("ERROR %lX\n", us->pusb_dev->status);
+ debug("ERROR %lX\n", us->pusb_dev->status);
us->transport_reset(us);
return USB_STOR_TRANSPORT_ERROR;
}
@@ -843,7 +835,7 @@
((srb->cmd[0] == SCSI_REQ_SENSE) ||
(srb->cmd[0] == SCSI_INQUIRY))) {
/* do not issue an autorequest after request sense */
- USB_STOR_PRINTF("No auto request and good\n");
+ debug("No auto request and good\n");
return USB_STOR_TRANSPORT_GOOD;
}
/* issue an request_sense */
@@ -856,19 +848,19 @@
psrb->cmdlen = 12;
/* issue the command */
result = usb_stor_CB_comdat(psrb, us);
- USB_STOR_PRINTF("auto request returned %d\n", result);
+ debug("auto request returned %d\n", result);
/* if this is an CBI Protocol, get IRQ */
if (us->protocol == US_PR_CBI)
status = usb_stor_CBI_get_status(psrb, us);
if ((result < 0) && !(us->pusb_dev->status & USB_ST_STALLED)) {
- USB_STOR_PRINTF(" AUTO REQUEST ERROR %ld\n",
- us->pusb_dev->status);
+ debug(" AUTO REQUEST ERROR %ld\n",
+ us->pusb_dev->status);
return USB_STOR_TRANSPORT_ERROR;
}
- USB_STOR_PRINTF("autorequest returned 0x%02X 0x%02X 0x%02X 0x%02X\n",
- srb->sense_buf[0], srb->sense_buf[2],
- srb->sense_buf[12], srb->sense_buf[13]);
+ debug("autorequest returned 0x%02X 0x%02X 0x%02X 0x%02X\n",
+ srb->sense_buf[0], srb->sense_buf[2],
+ srb->sense_buf[12], srb->sense_buf[13]);
/* Check the auto request result */
if ((srb->sense_buf[2] == 0) &&
(srb->sense_buf[12] == 0) &&
@@ -923,7 +915,7 @@
srb->datalen = 36;
srb->cmdlen = 12;
i = ss->transport(srb, ss);
- USB_STOR_PRINTF("inquiry returns %d\n", i);
+ debug("inquiry returns %d\n", i);
if (i == 0)
break;
} while (--retry);
@@ -948,9 +940,9 @@
srb->pdata = &srb->sense_buf[0];
srb->cmdlen = 12;
ss->transport(srb, ss);
- USB_STOR_PRINTF("Request Sense returned %02X %02X %02X\n",
- srb->sense_buf[2], srb->sense_buf[12],
- srb->sense_buf[13]);
+ debug("Request Sense returned %02X %02X %02X\n",
+ srb->sense_buf[2], srb->sense_buf[12],
+ srb->sense_buf[13]);
srb->pdata = (uchar *)ptr;
return 0;
}
@@ -1017,7 +1009,7 @@
srb->cmd[7] = ((unsigned char) (blocks >> 8)) & 0xff;
srb->cmd[8] = (unsigned char) blocks & 0xff;
srb->cmdlen = 12;
- USB_STOR_PRINTF("read10: start %lx blocks %x\n", start, blocks);
+ debug("read10: start %lx blocks %x\n", start, blocks);
return ss->transport(srb, ss);
}
@@ -1034,7 +1026,7 @@
srb->cmd[7] = ((unsigned char) (blocks >> 8)) & 0xff;
srb->cmd[8] = (unsigned char) blocks & 0xff;
srb->cmdlen = 12;
- USB_STOR_PRINTF("write10: start %lx blocks %x\n", start, blocks);
+ debug("write10: start %lx blocks %x\n", start, blocks);
return ss->transport(srb, ss);
}
@@ -1078,7 +1070,7 @@
device &= 0xff;
/* Setup device */
- USB_STOR_PRINTF("\nusb_read: dev %d \n", device);
+ debug("\nusb_read: dev %d \n", device);
dev = NULL;
for (i = 0; i < USB_MAX_DEVICE; i++) {
dev = usb_get_dev_index(i);
@@ -1095,8 +1087,8 @@
start = blknr;
blks = blkcnt;
- USB_STOR_PRINTF("\nusb_read: dev %d startblk " LBAF ", blccnt " LBAF
- " buffer %lx\n", device, start, blks, buf_addr);
+ debug("\nusb_read: dev %d startblk " LBAF ", blccnt " LBAF
+ " buffer %lx\n", device, start, blks, buf_addr);
do {
/* XXX need some comment here */
@@ -1112,7 +1104,7 @@
srb->datalen = usb_dev_desc[device].blksz * smallblks;
srb->pdata = (unsigned char *)buf_addr;
if (usb_read_10(srb, ss, start, smallblks)) {
- USB_STOR_PRINTF("Read ERROR\n");
+ debug("Read ERROR\n");
usb_request_sense(srb, ss);
if (retry--)
goto retry_it;
@@ -1125,9 +1117,9 @@
} while (blks != 0);
ss->flags &= ~USB_READY;
- USB_STOR_PRINTF("usb_read: end startblk " LBAF
- ", blccnt %x buffer %lx\n",
- start, smallblks, buf_addr);
+ debug("usb_read: end startblk " LBAF
+ ", blccnt %x buffer %lx\n",
+ start, smallblks, buf_addr);
usb_disable_asynch(0); /* asynch transfer allowed */
if (blkcnt >= USB_MAX_XFER_BLK)
@@ -1151,7 +1143,7 @@
device &= 0xff;
/* Setup device */
- USB_STOR_PRINTF("\nusb_write: dev %d \n", device);
+ debug("\nusb_write: dev %d \n", device);
dev = NULL;
for (i = 0; i < USB_MAX_DEVICE; i++) {
dev = usb_get_dev_index(i);
@@ -1169,8 +1161,8 @@
start = blknr;
blks = blkcnt;
- USB_STOR_PRINTF("\nusb_write: dev %d startblk " LBAF ", blccnt " LBAF
- " buffer %lx\n", device, start, blks, buf_addr);
+ debug("\nusb_write: dev %d startblk " LBAF ", blccnt " LBAF
+ " buffer %lx\n", device, start, blks, buf_addr);
do {
/* If write fails retry for max retry count else
@@ -1188,7 +1180,7 @@
srb->datalen = usb_dev_desc[device].blksz * smallblks;
srb->pdata = (unsigned char *)buf_addr;
if (usb_write_10(srb, ss, start, smallblks)) {
- USB_STOR_PRINTF("Write ERROR\n");
+ debug("Write ERROR\n");
usb_request_sense(srb, ss);
if (retry--)
goto retry_it;
@@ -1201,9 +1193,8 @@
} while (blks != 0);
ss->flags &= ~USB_READY;
- USB_STOR_PRINTF("usb_write: end startblk " LBAF
- ", blccnt %x buffer %lx\n",
- start, smallblks, buf_addr);
+ debug("usb_write: end startblk " LBAF ", blccnt %x buffer %lx\n",
+ start, smallblks, buf_addr);
usb_disable_asynch(0); /* asynch transfer allowed */
if (blkcnt >= USB_MAX_XFER_BLK)
@@ -1218,6 +1209,7 @@
{
struct usb_interface *iface;
int i;
+ struct usb_endpoint_descriptor *ep_desc;
unsigned int flags = 0;
int protocol = 0;
@@ -1228,12 +1220,12 @@
#if 0
/* this is the place to patch some storage devices */
- USB_STOR_PRINTF("iVendor %X iProduct %X\n", dev->descriptor.idVendor,
+ debug("iVendor %X iProduct %X\n", dev->descriptor.idVendor,
dev->descriptor.idProduct);
if ((dev->descriptor.idVendor) == 0x066b &&
(dev->descriptor.idProduct) == 0x0103) {
- USB_STOR_PRINTF("patched for E-USB\n");
+ debug("patched for E-USB\n");
protocol = US_PR_CB;
subclass = US_SC_UFI; /* an assumption */
}
@@ -1250,7 +1242,7 @@
memset(ss, 0, sizeof(struct us_data));
/* At this point, we know we've got a live one */
- USB_STOR_PRINTF("\n\nUSB Mass Storage device detected\n");
+ debug("\n\nUSB Mass Storage device detected\n");
/* Initialize the us_data structure with some useful info */
ss->flags = flags;
@@ -1270,21 +1262,21 @@
}
/* set the handler pointers based on the protocol */
- USB_STOR_PRINTF("Transport: ");
+ debug("Transport: ");
switch (ss->protocol) {
case US_PR_CB:
- USB_STOR_PRINTF("Control/Bulk\n");
+ debug("Control/Bulk\n");
ss->transport = usb_stor_CB_transport;
ss->transport_reset = usb_stor_CB_reset;
break;
case US_PR_CBI:
- USB_STOR_PRINTF("Control/Bulk/Interrupt\n");
+ debug("Control/Bulk/Interrupt\n");
ss->transport = usb_stor_CB_transport;
ss->transport_reset = usb_stor_CB_reset;
break;
case US_PR_BULK:
- USB_STOR_PRINTF("Bulk/Bulk/Bulk\n");
+ debug("Bulk/Bulk/Bulk\n");
ss->transport = usb_stor_BBB_transport;
ss->transport_reset = usb_stor_BBB_reset;
break;
@@ -1300,34 +1292,35 @@
* We will ignore any others.
*/
for (i = 0; i < iface->desc.bNumEndpoints; i++) {
+ ep_desc = &iface->ep_desc[i];
/* is it an BULK endpoint? */
- if ((iface->ep_desc[i].bmAttributes &
+ if ((ep_desc->bmAttributes &
USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK) {
- if (iface->ep_desc[i].bEndpointAddress & USB_DIR_IN)
- ss->ep_in = iface->ep_desc[i].bEndpointAddress &
- USB_ENDPOINT_NUMBER_MASK;
+ if (ep_desc->bEndpointAddress & USB_DIR_IN)
+ ss->ep_in = ep_desc->bEndpointAddress &
+ USB_ENDPOINT_NUMBER_MASK;
else
ss->ep_out =
- iface->ep_desc[i].bEndpointAddress &
+ ep_desc->bEndpointAddress &
USB_ENDPOINT_NUMBER_MASK;
}
/* is it an interrupt endpoint? */
- if ((iface->ep_desc[i].bmAttributes &
- USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) {
- ss->ep_int = iface->ep_desc[i].bEndpointAddress &
- USB_ENDPOINT_NUMBER_MASK;
- ss->irqinterval = iface->ep_desc[i].bInterval;
+ if ((ep_desc->bmAttributes &
+ USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) {
+ ss->ep_int = ep_desc->bEndpointAddress &
+ USB_ENDPOINT_NUMBER_MASK;
+ ss->irqinterval = ep_desc->bInterval;
}
}
- USB_STOR_PRINTF("Endpoints In %d Out %d Int %d\n",
- ss->ep_in, ss->ep_out, ss->ep_int);
+ debug("Endpoints In %d Out %d Int %d\n",
+ ss->ep_in, ss->ep_out, ss->ep_int);
/* Do some basic sanity checks, and bail if we find a problem */
if (usb_set_interface(dev, iface->desc.bInterfaceNumber, 0) ||
!ss->ep_in || !ss->ep_out ||
(ss->protocol == US_PR_CBI && ss->ep_int == 0)) {
- USB_STOR_PRINTF("Problems with device\n");
+ debug("Problems with device\n");
return 0;
}
/* set class specific stuff */
@@ -1366,7 +1359,7 @@
dev_desc->target = dev->devnum;
pccb->lun = dev_desc->lun;
- USB_STOR_PRINTF(" address %d\n", dev_desc->target);
+ debug(" address %d\n", dev_desc->target);
if (usb_inquiry(pccb, ss))
return -1;
@@ -1392,8 +1385,8 @@
usb_bin_fixup(dev->descriptor, (uchar *)dev_desc->vendor,
(uchar *)dev_desc->product);
#endif /* CONFIG_USB_BIN_FIXUP */
- USB_STOR_PRINTF("ISO Vers %X, Response Data %X\n", usb_stor_buf[2],
- usb_stor_buf[3]);
+ debug("ISO Vers %X, Response Data %X\n", usb_stor_buf[2],
+ usb_stor_buf[3]);
if (usb_test_unit_ready(pccb, ss)) {
printf("Device NOT ready\n"
" Request Sense returned %02X %02X %02X\n",
@@ -1413,8 +1406,7 @@
cap[1] = 0x200;
}
ss->flags &= ~USB_READY;
- USB_STOR_PRINTF("Read Capacity returns: 0x%lx, 0x%lx\n", cap[0],
- cap[1]);
+ debug("Read Capacity returns: 0x%lx, 0x%lx\n", cap[0], cap[1]);
#if 0
if (cap[0] > (0x200000 * 10)) /* greater than 10 GByte */
cap[0] >>= 16;
@@ -1426,17 +1418,16 @@
cap[0] += 1;
capacity = &cap[0];
blksz = &cap[1];
- USB_STOR_PRINTF("Capacity = 0x%lx, blocksz = 0x%lx\n",
- *capacity, *blksz);
+ debug("Capacity = 0x%lx, blocksz = 0x%lx\n", *capacity, *blksz);
dev_desc->lba = *capacity;
dev_desc->blksz = *blksz;
dev_desc->log2blksz = LOG2(dev_desc->blksz);
dev_desc->type = perq;
- USB_STOR_PRINTF(" address %d\n", dev_desc->target);
- USB_STOR_PRINTF("partype: %d\n", dev_desc->part_type);
+ debug(" address %d\n", dev_desc->target);
+ debug("partype: %d\n", dev_desc->part_type);
init_part(dev_desc);
- USB_STOR_PRINTF("partype: %d\n", dev_desc->part_type);
+ debug("partype: %d\n", dev_desc->part_type);
return 1;
}
diff --git a/config.mk b/config.mk
index b427a4e..ddf350e 100644
--- a/config.mk
+++ b/config.mk
@@ -250,11 +250,10 @@
CPPFLAGS += -fno-builtin -ffreestanding -nostdinc \
-isystem $(gccincdir) -pipe $(PLATFORM_CPPFLAGS)
-ifdef BUILD_TAG
-CFLAGS := $(CPPFLAGS) -Wall -Wstrict-prototypes \
- -DBUILD_TAG='"$(BUILD_TAG)"'
-else
CFLAGS := $(CPPFLAGS) -Wall -Wstrict-prototypes
+
+ifdef BUILD_TAG
+CFLAGS += -DBUILD_TAG='"$(BUILD_TAG)"'
endif
CFLAGS_SSP := $(call cc-option,-fno-stack-protector)
diff --git a/doc/README.at91 b/doc/README.at91
index b51df00..6741213 100644
--- a/doc/README.at91
+++ b/doc/README.at91
@@ -1,6 +1,9 @@
Atmel AT91 Evaluation kits
-http://atmel.com/dyn/products/tools.asp?family_id=605#1443
+Index
+ - I. Board mapping & boot media
+ - II. NAND partition table
+ - III. watchdog support
I. Board mapping & boot media
------------------------------------------------------------------------------
@@ -10,7 +13,7 @@
Memory map
0x20000000 - 23FFFFFF SDRAM (64 MB)
0xC0000000 - Cxxxxxxx Atmel Dataflash card (J13)
- 0xD0000000 - Dxxxxxxx Soldered Atmel Dataflash
+ 0xD0000000 - D07FFFFF Soldered Atmel Dataflash (AT45DB642)
Environment variables
@@ -20,7 +23,6 @@
- Nand flash.
You can choose your storage location at config step (here for at91sam9260ek) :
- make at91sam9260ek_config - use data flash (spi cs1) (default)
make at91sam9260ek_nandflash_config - use nand flash
make at91sam9260ek_dataflash_cs0_config - use data flash (spi cs0)
make at91sam9260ek_dataflash_cs1_config - use data flash (spi cs1)
@@ -32,7 +34,7 @@
Memory map
0x20000000 - 23FFFFFF SDRAM (64 MB)
- 0xC0000000 - Cxxxxxxx Soldered Atmel Dataflash
+ 0xC0000000 - C07FFFFF Soldered Atmel Dataflash (AT45DB642)
0xD0000000 - Dxxxxxxx Atmel Dataflash card (J22)
Environment variables
@@ -43,7 +45,6 @@
- Nand flash.
You can choose your storage location at config step (here for at91sam9260ek) :
- make at91sam9261ek_config - use data flash (spi cs0) (default)
make at91sam9261ek_nandflash_config - use nand flash
make at91sam9261ek_dataflash_cs0_config - use data flash (spi cs0)
make at91sam9261ek_dataflash_cs3_config - use data flash (spi cs3)
@@ -65,7 +66,6 @@
- Nor flash (not populate by default)
You can choose your storage location at config step (here for at91sam9260ek) :
- make at91sam9263ek_config - use data flash (spi cs0) (default)
make at91sam9263ek_nandflash_config - use nand flash
make at91sam9263ek_dataflash_cs0_config - use data flash (spi cs0)
make at91sam9263ek_norflash_config - use nor flash
@@ -79,19 +79,15 @@
------------------------------------------------------------------------------
Memory map
- 0x20000000 - 23FFFFFF SDRAM (64 MB)
- 0xC0000000 - Cxxxxxxx Atmel Dataflash card (J12)
+ 0x70000000 - 77FFFFFF SDRAM (128 MB)
Environment variables
U-Boot environment variables can be stored at different places:
- - Dataflash on SPI chip select 0 (dataflash card)
- Nand flash.
You can choose your storage location at config step (here for at91sam9m10g45ek) :
- make at91sam9m10g45ek_config - use data flash (spi cs0) (default)
make at91sam9m10g45ek_nandflash_config - use nand flash
- make at91sam9m10g45ek_dataflash_cs0_config - use data flash (spi cs0)
------------------------------------------------------------------------------
@@ -100,7 +96,7 @@
Memory map
0x20000000 - 23FFFFFF SDRAM (64 MB)
- 0xC0000000 - Cxxxxxxx Soldered Atmel Dataflash
+ 0xC0000000 - C07FFFFF Soldered Atmel Dataflash (AT45DB642)
Environment variables
@@ -108,12 +104,66 @@
- Dataflash on SPI chip select 0
- Nand flash.
- You can choose your storage location at config step (here for at91sam9260ek) :
- make at91sam9263ek_config - use data flash (spi cs0) (default)
- make at91sam9263ek_nandflash_config - use nand flash
- make at91sam9263ek_dataflash_cs0_config - use data flash (spi cs0)
+ You can choose your storage location at config step (here for at91sam9rlek) :
+ make at91sam9rlek_nandflash_config - use nand flash
-II. Watchdog support
+
+------------------------------------------------------------------------------
+AT91SAM9N12EK, AT91SAM9X5EK
+------------------------------------------------------------------------------
+
+Memory map
+ 0x20000000 - 27FFFFFF SDRAM (128 MB)
+
+Environment variables
+
+ U-Boot environment variables can be stored at different places:
+ - Nand flash.
+ - SD/MMC card
+ - Serialflash/Dataflash on SPI chip select 0
+
+ You can choose your storage location at config step (here for at91sam9x5ek) :
+ make at91sam9x5ek_dataflash_config - use data flash
+ make at91sam9x5ek_mmc_config - use sd/mmc card
+ make at91sam9x5ek_nandflash_config - use nand flash
+ make at91sam9x5ek_spiflash_config - use serial flash
+
+
+------------------------------------------------------------------------------
+SAMA5D3XEK
+------------------------------------------------------------------------------
+
+Memory map
+ 0x20000000 - 3FFFFFFF SDRAM (512 MB)
+
+Environment variables
+
+ U-Boot environment variables can be stored at different places:
+ - Nand flash.
+ - SD/MMC card
+ - Serialflash on SPI chip select 0
+
+ You can choose your storage location at config step (here for sama5d3xek) :
+ make sama5d3xek_mmc_config - use SD/MMC card
+ make sama5d3xek_nandflash_config - use nand flash
+ make sama5d3xek_serialflash_config - use serial flash
+
+
+II. NAND partition table
+
+ All the board support boot from NAND flash will use the following NAND
+ partition table
+
+ 0x00000000 - 0x0003FFFF bootstrap (256 KiB)
+ 0x00040000 - 0x000BFFFF u-boot (512 KiB)
+ 0x000C0000 - 0x000FFFFF env (256 KiB)
+ 0x00100000 - 0x0013FFFF env_redundant (256 KiB)
+ 0x00140000 - 0x0017FFFF spare (256 KiB)
+ 0x00180000 - 0x001FFFFF dtb (512 KiB)
+ 0x00200000 - 0x007FFFFF kernel (6 MiB)
+ 0x00800000 - 0xxxxxxxxx rootfs (All left)
+
+III. Watchdog support
For security reasons, the at91 watchdog is running at boot time and,
if deactivated, cannot be used anymore.
diff --git a/doc/README.b4860qds b/doc/README.b4860qds
index f6c5ff8..bd10a6d 100644
--- a/doc/README.b4860qds
+++ b/doc/README.b4860qds
@@ -185,7 +185,7 @@
0xF_A0C0_0000 0xF_DFFF_FFFF Free 1012 MB
0xF_A000_0000 0xF_A0BF_FFFF MAPLE0/1/2 12 MB
0xF_0040_0000 0xF_9FFF_FFFF Free 12 GB
-0xF_0000_0000 0xF_003F_FFFF DCSR 4 MB
+0xF_0000_0000 0xF_01FF_FFFF DCSR 32 MB
0xC_4000_0000 0xE_FFFF_FFFF Free 11 GB
0xC_3000_0000 0xC_3FFF_FFFF sRIO-2 I/O 256 MB
0xC_2000_0000 0xC_2FFF_FFFF sRIO-1 I/O 256 MB
@@ -215,7 +215,7 @@
0xF_A0C0_0000 0xF_DFFF_FFFF Free 1012 MB
0xF_A000_0000 0xF_A0BF_FFFF MAPLE0/1/2 12 MB
0xF_0040_0000 0xF_9FFF_FFFF Free 12 GB
-0xF_0000_0000 0xF_003F_FFFF DCSR 4 MB
+0xF_0000_0000 0xF_01FF_FFFF DCSR 32 MB
0xC_4000_0000 0xE_FFFF_FFFF Free 11 GB
0xC_3000_0000 0xC_3FFF_FFFF sRIO-2 I/O 256 MB
0xC_2000_0000 0xC_2FFF_FFFF sRIO-1 I/O 256 MB
diff --git a/doc/README.fdt-control b/doc/README.fdt-control
index 5963f78..95a88a7 100644
--- a/doc/README.fdt-control
+++ b/doc/README.fdt-control
@@ -49,6 +49,12 @@
generic source base.
To enable this feature, add CONFIG_OF_CONTROL to your board config file.
+It is currently supported on ARM, x86 and Microblaze - other architectures
+will need to add code to their arch/xxx/lib/board.c file to locate the
+FDT. Alternatively you can enable generic board support on your board
+(with CONFIG_SYS_GENERIC_BOARD) if this is available (as it is for
+PowerPC). For ARM, Tegra and Exynos5 have device trees available for
+common devices.
What is a Flat Device Tree?
@@ -99,7 +105,8 @@
* Bad configuration: 0
* Strange test result: 0
-You will also find a useful ftdump utility for decoding a binary file.
+You will also find a useful fdtdump utility for decoding a binary file, as
+well as fdtget/fdtput for reading and writing properties in a binary file.
Where do I get an fdt file for my board?
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 2cdb8a9..a0f1fa3 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,8 +11,11 @@
Board Arch CPU Commit Removed Last known maintainer/contact
=================================================================================================
-smdk6400 arm arm1176 - - Zhong Hongbo <bocui107@gmail.com>
-ns9750dev arm arm926ejs - - Markus Pietrek <mpietrek@fsforth.de>
+Alaska8220 powerpc mpc8220 - -
+Yukon8220 powerpc mpc8220 - -
+sorcery powerpc mpc8220 - -
+smdk6400 arm arm1176 52587f1 2013-04-12 Zhong Hongbo <bocui107@gmail.com>
+ns9750dev arm arm926ejs 4cfc611 2013-02-28 Markus Pietrek <mpietrek@fsforth.de>
AMX860 powerpc mpc860 1b0757e 2012-10-28 Wolfgang Denk <wd@denx.de>
c2mon powerpc mpc855 1b0757e 2012-10-28 Wolfgang Denk <wd@denx.de>
ETX094 powerpc mpc850 1b0757e 2012-10-28 Wolfgang Denk <wd@denx.de>
@@ -93,3 +96,4 @@
CPCI440 powerpc 440GP b568fd2 2007-12-27 Matthias Fuchs <matthias.fuchs@esd-electronics.com>
PCIPPC2 powerpc MPC740/MPC750 7c9e89b 2013-02-07 Wolfgang Denk <wd@denx.de>
PCIPPC6 powerpc MPC740/MPC750 - - Wolfgang Denk <wd@denx.de>
+omap2420h4 arm omap24xx - 2013-06-04 Richard Woodruff <r-woodruff2@ti.com>
diff --git a/doc/README.t4240qds b/doc/README.t4240qds
index 677d120..a9841fb 100644
--- a/doc/README.t4240qds
+++ b/doc/README.t4240qds
@@ -86,7 +86,7 @@
0x0_0000_0000 (0x0_0000_0000) - 0x0_7fff_ffff 2GB DDR (more than 2GB is initialized but not mapped under with TLB)
0x0_8000_0000 (0xc_0000_0000) - 0x0_dfff_ffff 1.5GB PCIE memory
-0x0_f000_0000 (0xf_0000_0000) - 0x0_f03f_ffff 4MB DCSR
+0x0_f000_0000 (0xf_0000_0000) - 0x0_f1ff_ffff 32MB DCSR (includes trace buffers)
0x0_f400_0000 (0xf_f400_0000) - 0x0_f5ff_ffff 32MB BMan
0x0_f600_0000 (0xf_f600_0000) - 0x0_f7ff_ffff 32MB QMan
0x0_f800_0000 (0xf_f800_0000) - 0x0_f803_ffff 256KB PCIE IO
@@ -96,3 +96,27 @@
0x0_ffff_f000 (0x0_7fff_fff0) - 0x0_ffff_ffff 4KB Boot page translation for secondary cores
The physical address of the last (boot page translation) varies with the actual DDR size.
+
+Voltage ID and VDD override
+--------------------
+T4240 has a VID feature. U-boot reads the VID efuses and adjust the voltage
+accordingly. The voltage can also be override by command vdd_override. The
+syntax is
+
+vdd_override <voltage in mV>, eg. 1050 is for 1.050v.
+
+Upon success, the actual voltage will be read back. The value is checked
+for safety and any invalid value will not adjust the voltage.
+
+Another way to override VDD is to use environmental variable, in case of using
+command is too late for some debugging. The syntax is
+
+setenv t4240qds_vdd_mv <voltage in mV>
+saveenv
+reset
+
+The override voltage takes effect when booting.
+
+Note: voltage adjustment needs to be done step by step. Changing voltage too
+rapidly may cause current surge. The voltage stepping is done by software.
+Users can set the final voltage directly.
diff --git a/doc/README.ubi b/doc/README.ubi
index da2dfac..3cf4ef2 100644
--- a/doc/README.ubi
+++ b/doc/README.ubi
@@ -2,7 +2,8 @@
UBI usage in U-Boot
-------------------
-Here the list of the currently implemented UBI commands:
+UBI support in U-Boot is broken down into five separate commands.
+The first is the ubi command, which has six subcommands:
=> help ubi
ubi - ubi commands
@@ -142,3 +143,80 @@
=> cmp.b 800000 900000 80000
Total of 524288 bytes were the same
+
+
+Next, the ubifsmount command allows you to access filesystems on the
+UBI partition which has been attached with the ubi part command:
+
+=> help ubifsmount
+ubifsmount - mount UBIFS volume
+
+Usage:
+ubifsmount <volume-name>
+ - mount 'volume-name' volume
+
+For example:
+
+=> ubifsmount ubi0:recovery
+UBIFS: mounted UBI device 0, volume 0, name "recovery"
+UBIFS: mounted read-only
+UBIFS: file system size: 46473216 bytes (45384 KiB, 44 MiB, 366 LEBs)
+UBIFS: journal size: 6348800 bytes (6200 KiB, 6 MiB, 50 LEBs)
+UBIFS: media format: w4/r0 (latest is w4/r0)
+UBIFS: default compressor: LZO
+UBIFS: reserved for root: 0 bytes (0 KiB)
+
+Note that unlike Linux, U-Boot can only have one active UBI partition
+at a time, which can be referred to as ubi0, and must be supplied along
+with the name of the filesystem you are mounting.
+
+
+Once a UBI filesystem has been mounted, the ubifsls command allows you
+to list the contents of a directory in the filesystem:
+
+
+=> help ubifsls
+ubifsls - list files in a directory
+
+Usage:
+ubifsls [directory]
+ - list files in a 'directory' (default '/')
+
+For example:
+
+=> ubifsls
+ 17442 Thu Jan 01 02:57:38 1970 imx28-evk.dtb
+ 2998146 Thu Jan 01 02:57:43 1970 zImage
+
+
+And the ubifsload command allows you to load a file from a UBI
+filesystem:
+
+
+=> help ubifsload
+ubifsload - load file from an UBIFS filesystem
+
+Usage:
+ubifsload <addr> <filename> [bytes]
+ - load file 'filename' to address 'addr'
+
+For example:
+
+=> ubifsload ${loadaddr} zImage
+Loading file 'zImage' to addr 0x42000000 with size 2998146 (0x002dbf82)...
+Done
+
+
+Finally, you can unmount the UBI filesystem with the ubifsumount
+command:
+
+=> help ubifsumount
+ubifsumount - unmount UBIFS volume
+
+Usage:
+ubifsumount - unmount current volume
+
+For example:
+
+=> ubifsumount
+Unmounting UBIFS volume recovery!
diff --git a/doc/README.watchdog b/doc/README.watchdog
index 33f31c2..59f306b 100644
--- a/doc/README.watchdog
+++ b/doc/README.watchdog
@@ -30,3 +30,6 @@
CONFIG_XILINX_TB_WATCHDOG
Available for Xilinx Axi platforms to service timebase watchdog timer.
+
+CONFIG_BFIN_WATCHDOG
+ Available for bf5xx and bf6xx to service the watchdog.
diff --git a/doc/SPL/README.am335x-network b/doc/SPL/README.am335x-network
index e5a198f..9b63791 100644
--- a/doc/SPL/README.am335x-network
+++ b/doc/SPL/README.am335x-network
@@ -7,7 +7,7 @@
I. Building the required images
1. You have to enable generic SPL configuration options (see
-docs/README.SPL) as well as CONFIG_SPL_NET_SUPPORT,
+doc/README.SPL) as well as CONFIG_SPL_NET_SUPPORT,
CONFIG_ETH_SUPPORT, CONFIG_SPL_LIBGENERIC_SUPPORT and
CONFIG_SPL_LIBCOMMON_SUPPORT in your board configuration file to build
SPL with support for booting over the network. Also you have to enable
diff --git a/doc/device-tree-bindings/exynos/dwmmc.txt b/doc/device-tree-bindings/exynos/dwmmc.txt
new file mode 100644
index 0000000..566da3b
--- /dev/null
+++ b/doc/device-tree-bindings/exynos/dwmmc.txt
@@ -0,0 +1,54 @@
+* Exynos 5250 DWC_mobile_storage
+
+The Exynos 5250 provides DWC_mobile_storage interface which supports
+. Embedded Multimedia Cards (EMMC-version 4.5)
+. Secure Digital memory (SD mem-version 2.0)
+. Secure Digital I/O (SDIO-version 3.0)
+. Consumer Electronics Advanced Transport Architecture (CE-ATA-version 1.1)
+
+The Exynos 5250 DWC_mobile_storage provides four channels.
+SOC specific and Board specific properties are channel specific.
+
+Required SoC Specific Properties:
+
+- compatible: should be
+ - samsung,exynos5250-dwmmc: for exynos5250 platforms
+
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+- interrupts: The interrupt number to the cpu.
+
+Required Board Specific Properties:
+
+- #address-cells: should be 1.
+- #size-cells: should be 0.
+- samsung,bus-width: The width of the bus used to interface the devices
+ supported by DWC_mobile_storage (SD-MMC/EMMC/SDIO).
+ . Typically the bus width is 4 or 8.
+- samsung,timing: The timing values to be written into the
+ Drv/sample clock selection register of corresponding channel.
+ . It is comprised of 3 values corresponding to the 3 fileds
+ 'SelClk_sample', 'SelClk_drv' and 'DIVRATIO' of CLKSEL register.
+ . SelClk_sample: Select sample clock among 8 shifted clocks.
+ . SelClk_drv: Select drv clock among 8 shifted clocks.
+ . DIVRATIO: Clock Divide ratio select.
+ . The above 3 values are used by the clock phase shifter.
+
+Example:
+
+mmc@12200000 {
+ samsung,bus-width = <8>;
+ samsung,timing = <1 3 3>;
+ samsung,removable = <1>;
+}
+In the above example,
+ . The bus width is 8
+ . Timing is comprised of 3 values as explained below
+ 1 - SelClk_sample
+ 3 - SelClk_drv
+ 3 - DIVRATIO
+ . The 'removable' flag indicates whether the the particilar device
+ cannot be removed (always present) or it is a removable device.
+ 1 - Indicates that the device is removable.
+ 0 - Indicates that the device cannot be removed.
diff --git a/doc/driver-model/UDM-pci.txt b/doc/driver-model/UDM-pci.txt
index c2cf2d5..6a592b3 100644
--- a/doc/driver-model/UDM-pci.txt
+++ b/doc/driver-model/UDM-pci.txt
@@ -201,11 +201,7 @@
-----------------------------
Standard driver, uses indirect functions.
- 12) powerpc/cpu/mpc8220/pci.c
- -----------------------------
- Standard driver, specifies all read/write functions separately.
-
- 13) powerpc/cpu/mpc85xx/pci.c
+ 12) powerpc/cpu/mpc85xx/pci.c
-----------------------------
Standard driver, uses indirect functions, has two busses.
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 9df1e26..f77c1ec 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -47,6 +47,8 @@
COBJS-$(CONFIG_DB8500_GPIO) += db8500_gpio.o
COBJS-$(CONFIG_BCM2835_GPIO) += bcm2835_gpio.o
COBJS-$(CONFIG_S3C2440_GPIO) += s3c2440_gpio.o
+COBJS-$(CONFIG_XILINX_GPIO) += xilinx_gpio.o
+COBJS-$(CONFIG_ADI_GPIO2) += adi_gpio2.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
diff --git a/drivers/gpio/adi_gpio2.c b/drivers/gpio/adi_gpio2.c
new file mode 100644
index 0000000..7a034eb
--- /dev/null
+++ b/drivers/gpio/adi_gpio2.c
@@ -0,0 +1,440 @@
+/*
+ * ADI GPIO2 Abstraction Layer
+ * Support BF54x, BF60x and future processors.
+ *
+ * Copyright 2008-2013 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
+#include <common.h>
+#include <asm/errno.h>
+#include <asm/gpio.h>
+#include <asm/portmux.h>
+
+static struct gpio_port_t * const gpio_array[] = {
+ (struct gpio_port_t *)PORTA_FER,
+ (struct gpio_port_t *)PORTB_FER,
+ (struct gpio_port_t *)PORTC_FER,
+ (struct gpio_port_t *)PORTD_FER,
+ (struct gpio_port_t *)PORTE_FER,
+ (struct gpio_port_t *)PORTF_FER,
+ (struct gpio_port_t *)PORTG_FER,
+#if defined(CONFIG_BF54x)
+ (struct gpio_port_t *)PORTH_FER,
+ (struct gpio_port_t *)PORTI_FER,
+ (struct gpio_port_t *)PORTJ_FER,
+#endif
+};
+
+#define RESOURCE_LABEL_SIZE 16
+
+static struct str_ident {
+ char name[RESOURCE_LABEL_SIZE];
+} str_ident[MAX_RESOURCES];
+
+static void gpio_error(unsigned gpio)
+{
+ printf("adi_gpio2: GPIO %d wasn't requested!\n", gpio);
+}
+
+static void set_label(unsigned short ident, const char *label)
+{
+ if (label) {
+ strncpy(str_ident[ident].name, label,
+ RESOURCE_LABEL_SIZE);
+ str_ident[ident].name[RESOURCE_LABEL_SIZE - 1] = 0;
+ }
+}
+
+static char *get_label(unsigned short ident)
+{
+ return *str_ident[ident].name ? str_ident[ident].name : "UNKNOWN";
+}
+
+static int cmp_label(unsigned short ident, const char *label)
+{
+ if (label == NULL)
+ printf("adi_gpio2: please provide none-null label\n");
+
+ if (label)
+ return strcmp(str_ident[ident].name, label);
+ else
+ return -EINVAL;
+}
+
+#define map_entry(m, i) reserved_##m##_map[gpio_bank(i)]
+#define is_reserved(m, i, e) (map_entry(m, i) & gpio_bit(i))
+#define reserve(m, i) (map_entry(m, i) |= gpio_bit(i))
+#define unreserve(m, i) (map_entry(m, i) &= ~gpio_bit(i))
+#define DECLARE_RESERVED_MAP(m, c) unsigned short reserved_##m##_map[c]
+
+static DECLARE_RESERVED_MAP(gpio, GPIO_BANK_NUM);
+static DECLARE_RESERVED_MAP(peri, gpio_bank(MAX_RESOURCES));
+
+inline int check_gpio(unsigned gpio)
+{
+#if defined(CONFIG_BF54x)
+ if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15 ||
+ gpio == GPIO_PH14 || gpio == GPIO_PH15 ||
+ gpio == GPIO_PJ14 || gpio == GPIO_PJ15)
+ return -EINVAL;
+#endif
+ if (gpio >= MAX_GPIOS)
+ return -EINVAL;
+ return 0;
+}
+
+static void port_setup(unsigned gpio, unsigned short usage)
+{
+#if defined(CONFIG_BF54x)
+ if (usage == GPIO_USAGE)
+ gpio_array[gpio_bank(gpio)]->port_fer &= ~gpio_bit(gpio);
+ else
+ gpio_array[gpio_bank(gpio)]->port_fer |= gpio_bit(gpio);
+#else
+ if (usage == GPIO_USAGE)
+ gpio_array[gpio_bank(gpio)]->port_fer_clear = gpio_bit(gpio);
+ else
+ gpio_array[gpio_bank(gpio)]->port_fer_set = gpio_bit(gpio);
+#endif
+ SSYNC();
+}
+
+inline void portmux_setup(unsigned short per)
+{
+ u32 pmux;
+ u16 ident = P_IDENT(per);
+ u16 function = P_FUNCT2MUX(per);
+
+ pmux = gpio_array[gpio_bank(ident)]->port_mux;
+
+ pmux &= ~(0x3 << (2 * gpio_sub_n(ident)));
+ pmux |= (function & 0x3) << (2 * gpio_sub_n(ident));
+
+ gpio_array[gpio_bank(ident)]->port_mux = pmux;
+}
+
+inline u16 get_portmux(unsigned short per)
+{
+ u32 pmux;
+ u16 ident = P_IDENT(per);
+
+ pmux = gpio_array[gpio_bank(ident)]->port_mux;
+
+ return pmux >> (2 * gpio_sub_n(ident)) & 0x3;
+}
+
+unsigned short get_gpio_dir(unsigned gpio)
+{
+ return 0x01 &
+ (gpio_array[gpio_bank(gpio)]->dir_clear >> gpio_sub_n(gpio));
+}
+
+/***********************************************************
+*
+* FUNCTIONS: Peripheral Resource Allocation
+* and PortMux Setup
+*
+* INPUTS/OUTPUTS:
+* per Peripheral Identifier
+* label String
+*
+* DESCRIPTION: Peripheral Resource Allocation and Setup API
+**************************************************************/
+
+int peripheral_request(unsigned short per, const char *label)
+{
+ unsigned short ident = P_IDENT(per);
+
+ /*
+ * Don't cares are pins with only one dedicated function
+ */
+
+ if (per & P_DONTCARE)
+ return 0;
+
+ if (!(per & P_DEFINED))
+ return -ENODEV;
+
+ BUG_ON(ident >= MAX_RESOURCES);
+
+ /* If a pin can be muxed as either GPIO or peripheral, make
+ * sure it is not already a GPIO pin when we request it.
+ */
+ if (unlikely(!check_gpio(ident) && is_reserved(gpio, ident, 1))) {
+ printf("%s: Peripheral %d is already reserved as GPIO by %s!\n",
+ __func__, ident, get_label(ident));
+ return -EBUSY;
+ }
+
+ if (unlikely(is_reserved(peri, ident, 1))) {
+ /*
+ * Pin functions like AMC address strobes my
+ * be requested and used by several drivers
+ */
+
+ if (!((per & P_MAYSHARE) &&
+ get_portmux(per) == P_FUNCT2MUX(per))) {
+ /*
+ * Allow that the identical pin function can
+ * be requested from the same driver twice
+ */
+
+ if (cmp_label(ident, label) == 0)
+ goto anyway;
+
+ printf("%s: Peripheral %d function %d is already "
+ "reserved by %s!\n", __func__, ident,
+ P_FUNCT2MUX(per), get_label(ident));
+ return -EBUSY;
+ }
+ }
+
+ anyway:
+ reserve(peri, ident);
+
+ portmux_setup(per);
+ port_setup(ident, PERIPHERAL_USAGE);
+
+ set_label(ident, label);
+
+ return 0;
+}
+
+int peripheral_request_list(const unsigned short per[], const char *label)
+{
+ u16 cnt;
+ int ret;
+
+ for (cnt = 0; per[cnt] != 0; cnt++) {
+ ret = peripheral_request(per[cnt], label);
+
+ if (ret < 0) {
+ for (; cnt > 0; cnt--)
+ peripheral_free(per[cnt - 1]);
+
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+void peripheral_free(unsigned short per)
+{
+ unsigned short ident = P_IDENT(per);
+
+ if (per & P_DONTCARE)
+ return;
+
+ if (!(per & P_DEFINED))
+ return;
+
+ if (unlikely(!is_reserved(peri, ident, 0)))
+ return;
+
+ if (!(per & P_MAYSHARE))
+ port_setup(ident, GPIO_USAGE);
+
+ unreserve(peri, ident);
+
+ set_label(ident, "free");
+}
+
+void peripheral_free_list(const unsigned short per[])
+{
+ u16 cnt;
+ for (cnt = 0; per[cnt] != 0; cnt++)
+ peripheral_free(per[cnt]);
+}
+
+/***********************************************************
+*
+* FUNCTIONS: GPIO Driver
+*
+* INPUTS/OUTPUTS:
+* gpio PIO Number between 0 and MAX_GPIOS
+* label String
+*
+* DESCRIPTION: GPIO Driver API
+**************************************************************/
+
+int gpio_request(unsigned gpio, const char *label)
+{
+ if (check_gpio(gpio) < 0)
+ return -EINVAL;
+
+ /*
+ * Allow that the identical GPIO can
+ * be requested from the same driver twice
+ * Do nothing and return -
+ */
+
+ if (cmp_label(gpio, label) == 0)
+ return 0;
+
+ if (unlikely(is_reserved(gpio, gpio, 1))) {
+ printf("adi_gpio2: GPIO %d is already reserved by %s!\n",
+ gpio, get_label(gpio));
+ return -EBUSY;
+ }
+ if (unlikely(is_reserved(peri, gpio, 1))) {
+ printf("adi_gpio2: GPIO %d is already reserved as Peripheral "
+ "by %s!\n", gpio, get_label(gpio));
+ return -EBUSY;
+ }
+
+ reserve(gpio, gpio);
+ set_label(gpio, label);
+
+ port_setup(gpio, GPIO_USAGE);
+
+ return 0;
+}
+
+int gpio_free(unsigned gpio)
+{
+ if (check_gpio(gpio) < 0)
+ return -1;
+
+ if (unlikely(!is_reserved(gpio, gpio, 0))) {
+ gpio_error(gpio);
+ return -1;
+ }
+
+ unreserve(gpio, gpio);
+
+ set_label(gpio, "free");
+
+ return 0;
+}
+
+#ifdef ADI_SPECIAL_GPIO_BANKS
+static DECLARE_RESERVED_MAP(special_gpio, gpio_bank(MAX_RESOURCES));
+
+int special_gpio_request(unsigned gpio, const char *label)
+{
+ /*
+ * Allow that the identical GPIO can
+ * be requested from the same driver twice
+ * Do nothing and return -
+ */
+
+ if (cmp_label(gpio, label) == 0)
+ return 0;
+
+ if (unlikely(is_reserved(special_gpio, gpio, 1))) {
+ printf("adi_gpio2: GPIO %d is already reserved by %s!\n",
+ gpio, get_label(gpio));
+ return -EBUSY;
+ }
+ if (unlikely(is_reserved(peri, gpio, 1))) {
+ printf("adi_gpio2: GPIO %d is already reserved as Peripheral "
+ "by %s!\n", gpio, get_label(gpio));
+
+ return -EBUSY;
+ }
+
+ reserve(special_gpio, gpio);
+ reserve(peri, gpio);
+
+ set_label(gpio, label);
+ port_setup(gpio, GPIO_USAGE);
+
+ return 0;
+}
+
+void special_gpio_free(unsigned gpio)
+{
+ if (unlikely(!is_reserved(special_gpio, gpio, 0))) {
+ gpio_error(gpio);
+ return;
+ }
+
+ reserve(special_gpio, gpio);
+ reserve(peri, gpio);
+ set_label(gpio, "free");
+}
+#endif
+
+static inline void __gpio_direction_input(unsigned gpio)
+{
+ gpio_array[gpio_bank(gpio)]->dir_clear = gpio_bit(gpio);
+#if defined(CONFIG_BF54x)
+ gpio_array[gpio_bank(gpio)]->inen |= gpio_bit(gpio);
+#else
+ gpio_array[gpio_bank(gpio)]->inen_set = gpio_bit(gpio);
+#endif
+}
+
+int gpio_direction_input(unsigned gpio)
+{
+ unsigned long flags;
+
+ if (!is_reserved(gpio, gpio, 0)) {
+ gpio_error(gpio);
+ return -EINVAL;
+ }
+
+ local_irq_save(flags);
+ __gpio_direction_input(gpio);
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+int gpio_set_value(unsigned gpio, int arg)
+{
+ if (arg)
+ gpio_array[gpio_bank(gpio)]->data_set = gpio_bit(gpio);
+ else
+ gpio_array[gpio_bank(gpio)]->data_clear = gpio_bit(gpio);
+
+ return 0;
+}
+
+int gpio_direction_output(unsigned gpio, int value)
+{
+ unsigned long flags;
+
+ if (!is_reserved(gpio, gpio, 0)) {
+ gpio_error(gpio);
+ return -EINVAL;
+ }
+
+ local_irq_save(flags);
+
+#if defined(CONFIG_BF54x)
+ gpio_array[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio);
+#else
+ gpio_array[gpio_bank(gpio)]->inen_clear = gpio_bit(gpio);
+#endif
+ gpio_set_value(gpio, value);
+ gpio_array[gpio_bank(gpio)]->dir_set = gpio_bit(gpio);
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+int gpio_get_value(unsigned gpio)
+{
+ return 1 & (gpio_array[gpio_bank(gpio)]->data >> gpio_sub_n(gpio));
+}
+
+void gpio_labels(void)
+{
+ int c, gpio;
+
+ for (c = 0; c < MAX_RESOURCES; c++) {
+ gpio = is_reserved(gpio, c, 1);
+ if (!check_gpio(c) && gpio)
+ printf("GPIO_%d:\t%s\tGPIO %s\n", c, get_label(c),
+ get_gpio_dir(c) ? "OUTPUT" : "INPUT");
+ else if (is_reserved(peri, c, 1))
+ printf("GPIO_%d:\t%s\tPeripheral\n", c, get_label(c));
+ else
+ continue;
+ }
+}
diff --git a/drivers/gpio/omap_gpio.c b/drivers/gpio/omap_gpio.c
index a30d7f0..f16e9ae 100644
--- a/drivers/gpio/omap_gpio.c
+++ b/drivers/gpio/omap_gpio.c
@@ -55,7 +55,7 @@
int gpio_is_valid(int gpio)
{
- return (gpio >= 0) && (gpio < 192);
+ return (gpio >= 0) && (gpio < OMAP_MAX_GPIO);
}
static int check_gpio(int gpio)
diff --git a/drivers/gpio/s3c2440_gpio.c b/drivers/gpio/s3c2440_gpio.c
index 43bbf11..09b04eb 100644
--- a/drivers/gpio/s3c2440_gpio.c
+++ b/drivers/gpio/s3c2440_gpio.c
@@ -61,7 +61,7 @@
else
l &= ~bit;
- return writel(port, l);
+ return writel(l, port);
}
int gpio_get_value(unsigned gpio)
@@ -85,11 +85,11 @@
int gpio_direction_input(unsigned gpio)
{
- return writel(GPIO_FULLPORT(gpio), GPIO_INPUT << GPIO_BIT(gpio));
+ return writel(GPIO_INPUT << GPIO_BIT(gpio), GPIO_FULLPORT(gpio));
}
int gpio_direction_output(unsigned gpio, int value)
{
- writel(GPIO_FULLPORT(gpio), GPIO_OUTPUT << GPIO_BIT(gpio));
+ writel(GPIO_OUTPUT << GPIO_BIT(gpio), GPIO_FULLPORT(gpio));
return gpio_set_value(gpio, value);
}
diff --git a/drivers/gpio/s5p_gpio.c b/drivers/gpio/s5p_gpio.c
index 656bf4a..4efb768 100644
--- a/drivers/gpio/s5p_gpio.c
+++ b/drivers/gpio/s5p_gpio.c
@@ -48,15 +48,8 @@
void s5p_gpio_direction_output(struct s5p_gpio_bank *bank, int gpio, int en)
{
- unsigned int value;
-
s5p_gpio_cfg_pin(bank, gpio, GPIO_OUTPUT);
-
- value = readl(&bank->dat);
- value &= ~DAT_MASK(gpio);
- if (en)
- value |= DAT_SET(gpio);
- writel(value, &bank->dat);
+ s5p_gpio_set_value(bank, gpio, en);
}
void s5p_gpio_direction_input(struct s5p_gpio_bank *bank, int gpio)
diff --git a/drivers/gpio/xilinx_gpio.c b/drivers/gpio/xilinx_gpio.c
new file mode 100644
index 0000000..37fb0c5
--- /dev/null
+++ b/drivers/gpio/xilinx_gpio.c
@@ -0,0 +1,364 @@
+/*
+ * Copyright (c) 2013 Xilinx, Michal Simek
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <malloc.h>
+#include <linux/list.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+
+static LIST_HEAD(gpio_list);
+
+enum gpio_direction {
+ GPIO_DIRECTION_OUT = 0,
+ GPIO_DIRECTION_IN = 1,
+};
+
+/* Gpio simple map */
+struct gpio_regs {
+ u32 gpiodata;
+ u32 gpiodir;
+};
+
+#define GPIO_NAME_SIZE 10
+
+struct gpio_names {
+ char name[GPIO_NAME_SIZE];
+};
+
+/* Initialized, rxbd_current, rx_first_buf must be 0 after init */
+struct xilinx_gpio_priv {
+ struct gpio_regs *regs;
+ u32 gpio_min;
+ u32 gpio_max;
+ u32 gpiodata_store;
+ char name[GPIO_NAME_SIZE];
+ struct list_head list;
+ struct gpio_names *gpio_name;
+};
+
+/* Store number of allocated gpio pins */
+static u32 xilinx_gpio_max;
+
+/* Get associated gpio controller */
+static struct xilinx_gpio_priv *gpio_get_controller(unsigned gpio)
+{
+ struct list_head *entry;
+ struct xilinx_gpio_priv *priv = NULL;
+
+ list_for_each(entry, &gpio_list) {
+ priv = list_entry(entry, struct xilinx_gpio_priv, list);
+ if (gpio >= priv->gpio_min && gpio <= priv->gpio_max) {
+ debug("%s: reg: %x, min-max: %d-%d\n", __func__,
+ (u32)priv->regs, priv->gpio_min, priv->gpio_max);
+ return priv;
+ }
+ }
+ puts("!!!Can't get gpio controller!!!\n");
+ return NULL;
+}
+
+/* Get gpio pin name if used/setup */
+static char *get_name(unsigned gpio)
+{
+ u32 gpio_priv;
+ struct xilinx_gpio_priv *priv;
+
+ debug("%s\n", __func__);
+
+ priv = gpio_get_controller(gpio);
+ if (priv) {
+ gpio_priv = gpio - priv->gpio_min;
+
+ return *priv->gpio_name[gpio_priv].name ?
+ priv->gpio_name[gpio_priv].name : "UNKNOWN";
+ }
+ return "UNKNOWN";
+}
+
+/* Get output value */
+static int gpio_get_output_value(unsigned gpio)
+{
+ u32 val, gpio_priv;
+ struct xilinx_gpio_priv *priv = gpio_get_controller(gpio);
+
+ if (priv) {
+ gpio_priv = gpio - priv->gpio_min;
+ val = !!(priv->gpiodata_store & (1 << gpio_priv));
+ debug("%s: reg: %x, gpio_no: %d, dir: %d\n", __func__,
+ (u32)priv->regs, gpio_priv, val);
+
+ return val;
+ }
+ return -1;
+}
+
+/* Get input value */
+static int gpio_get_input_value(unsigned gpio)
+{
+ u32 val, gpio_priv;
+ struct gpio_regs *regs;
+ struct xilinx_gpio_priv *priv = gpio_get_controller(gpio);
+
+ if (priv) {
+ regs = priv->regs;
+ gpio_priv = gpio - priv->gpio_min;
+ val = readl(®s->gpiodata);
+ val = !!(val & (1 << gpio_priv));
+ debug("%s: reg: %x, gpio_no: %d, dir: %d\n", __func__,
+ (u32)priv->regs, gpio_priv, val);
+
+ return val;
+ }
+ return -1;
+}
+
+/* Set gpio direction */
+static int gpio_set_direction(unsigned gpio, enum gpio_direction direction)
+{
+ u32 val, gpio_priv;
+ struct gpio_regs *regs;
+ struct xilinx_gpio_priv *priv = gpio_get_controller(gpio);
+
+ if (priv) {
+ regs = priv->regs;
+ val = readl(®s->gpiodir);
+
+ gpio_priv = gpio - priv->gpio_min;
+ if (direction == GPIO_DIRECTION_OUT)
+ val &= ~(1 << gpio_priv);
+ else
+ val |= 1 << gpio_priv;
+
+ writel(val, ®s->gpiodir);
+ debug("%s: reg: %x, gpio_no: %d, dir: %d\n", __func__,
+ (u32)priv->regs, gpio_priv, val);
+
+ return 0;
+ }
+
+ return -1;
+}
+
+/* Get gpio direction */
+static int gpio_get_direction(unsigned gpio)
+{
+ u32 val, gpio_priv;
+ struct gpio_regs *regs;
+ struct xilinx_gpio_priv *priv = gpio_get_controller(gpio);
+
+ if (priv) {
+ regs = priv->regs;
+ gpio_priv = gpio - priv->gpio_min;
+ val = readl(®s->gpiodir);
+ val = !!(val & (1 << gpio_priv));
+ debug("%s: reg: %x, gpio_no: %d, dir: %d\n", __func__,
+ (u32)priv->regs, gpio_priv, val);
+
+ return val;
+ }
+
+ return -1;
+}
+
+/*
+ * Get input value
+ * for example gpio setup to output only can't get input value
+ * which is breaking gpio toggle command
+ */
+int gpio_get_value(unsigned gpio)
+{
+ u32 val;
+
+ if (gpio_get_direction(gpio) == GPIO_DIRECTION_OUT)
+ val = gpio_get_output_value(gpio);
+ else
+ val = gpio_get_input_value(gpio);
+
+ return val;
+}
+
+/* Set output value */
+static int gpio_set_output_value(unsigned gpio, int value)
+{
+ u32 val, gpio_priv;
+ struct gpio_regs *regs;
+ struct xilinx_gpio_priv *priv = gpio_get_controller(gpio);
+
+ if (priv) {
+ regs = priv->regs;
+ gpio_priv = gpio - priv->gpio_min;
+ val = priv->gpiodata_store;
+ if (value)
+ val |= 1 << gpio_priv;
+ else
+ val &= ~(1 << gpio_priv);
+
+ writel(val, ®s->gpiodata);
+ debug("%s: reg: %x, gpio_no: %d, output_val: %d\n", __func__,
+ (u32)priv->regs, gpio_priv, val);
+ priv->gpiodata_store = val;
+
+ return 0;
+ }
+
+ return -1;
+}
+
+int gpio_set_value(unsigned gpio, int value)
+{
+ if (gpio_get_direction(gpio) == GPIO_DIRECTION_OUT)
+ return gpio_set_output_value(gpio, value);
+
+ return -1;
+}
+
+/* Set GPIO as input */
+int gpio_direction_input(unsigned gpio)
+{
+ debug("%s\n", __func__);
+ return gpio_set_direction(gpio, GPIO_DIRECTION_IN);
+}
+
+/* Setup GPIO as output and set output value */
+int gpio_direction_output(unsigned gpio, int value)
+{
+ int ret = gpio_set_direction(gpio, GPIO_DIRECTION_OUT);
+
+ debug("%s\n", __func__);
+
+ if (ret < 0)
+ return ret;
+
+ return gpio_set_output_value(gpio, value);
+}
+
+/* Show gpio status */
+void gpio_info(void)
+{
+ unsigned gpio;
+
+ struct list_head *entry;
+ struct xilinx_gpio_priv *priv = NULL;
+
+ list_for_each(entry, &gpio_list) {
+ priv = list_entry(entry, struct xilinx_gpio_priv, list);
+ printf("\n%s: %s/%x (%d-%d)\n", __func__, priv->name,
+ (u32)priv->regs, priv->gpio_min, priv->gpio_max);
+
+ for (gpio = priv->gpio_min; gpio <= priv->gpio_max; gpio++) {
+ printf("GPIO_%d:\t%s is an ", gpio, get_name(gpio));
+ if (gpio_get_direction(gpio) == GPIO_DIRECTION_OUT)
+ printf("OUTPUT value = %d\n",
+ gpio_get_output_value(gpio));
+ else
+ printf("INPUT value = %d\n",
+ gpio_get_input_value(gpio));
+ }
+ }
+}
+
+int gpio_request(unsigned gpio, const char *label)
+{
+ u32 gpio_priv;
+ struct xilinx_gpio_priv *priv;
+
+ if (gpio >= xilinx_gpio_max)
+ return -EINVAL;
+
+ priv = gpio_get_controller(gpio);
+ if (priv) {
+ gpio_priv = gpio - priv->gpio_min;
+
+ if (label != NULL) {
+ strncpy(priv->gpio_name[gpio_priv].name, label,
+ GPIO_NAME_SIZE);
+ priv->gpio_name[gpio_priv].name[GPIO_NAME_SIZE - 1] =
+ '\0';
+ }
+ return 0;
+ }
+
+ return -1;
+}
+
+int gpio_free(unsigned gpio)
+{
+ u32 gpio_priv;
+ struct xilinx_gpio_priv *priv;
+
+ if (gpio >= xilinx_gpio_max)
+ return -EINVAL;
+
+ priv = gpio_get_controller(gpio);
+ if (priv) {
+ gpio_priv = gpio - priv->gpio_min;
+ priv->gpio_name[gpio_priv].name[0] = '\0';
+
+ /* Do nothing here */
+ return 0;
+ }
+
+ return -1;
+}
+
+int gpio_alloc(u32 baseaddr, const char *name, u32 gpio_no)
+{
+ struct xilinx_gpio_priv *priv;
+
+ priv = calloc(1, sizeof(struct xilinx_gpio_priv));
+
+ /* Setup gpio name */
+ if (name != NULL) {
+ strncpy(priv->name, name, GPIO_NAME_SIZE);
+ priv->name[GPIO_NAME_SIZE - 1] = '\0';
+ }
+ priv->regs = (struct gpio_regs *)baseaddr;
+
+ priv->gpio_min = xilinx_gpio_max;
+ xilinx_gpio_max = priv->gpio_min + gpio_no;
+ priv->gpio_max = xilinx_gpio_max - 1;
+
+ priv->gpio_name = calloc(gpio_no, sizeof(struct gpio_names));
+
+ INIT_LIST_HEAD(&priv->list);
+ list_add_tail(&priv->list, &gpio_list);
+
+ printf("%s: Add %s (%d-%d)\n", __func__, name,
+ priv->gpio_min, priv->gpio_max);
+
+ /* Return the first gpio allocated for this device */
+ return priv->gpio_min;
+}
+
+/* Dual channel gpio is one IP with two independent channels */
+int gpio_alloc_dual(u32 baseaddr, const char *name, u32 gpio_no0, u32 gpio_no1)
+{
+ int ret;
+
+ ret = gpio_alloc(baseaddr, name, gpio_no0);
+ gpio_alloc(baseaddr + 8, strcat((char *)name, "_1"), gpio_no1);
+
+ /* Return the first gpio allocated for this device */
+ return ret;
+}
diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c
index 54e9b15..ef38d71 100644
--- a/drivers/i2c/omap24xx_i2c.c
+++ b/drivers/i2c/omap24xx_i2c.c
@@ -18,6 +18,20 @@
*
* Adapted for OMAP2420 I2C, r-woodruff2@ti.com
*
+ * Copyright (c) 2013 Lubomir Popov <lpopov@mm-sol.com>, MM Solutions
+ * New i2c_read, i2c_write and i2c_probe functions, tested on OMAP4
+ * (4430/60/70), OMAP5 (5430) and AM335X (3359); should work on older
+ * OMAPs and derivatives as well. The only anticipated exception would
+ * be the OMAP2420, which shall require driver modification.
+ * - Rewritten i2c_read to operate correctly with all types of chips
+ * (old function could not read consistent data from some I2C slaves).
+ * - Optimized i2c_write.
+ * - New i2c_probe, performs write access vs read. The old probe could
+ * hang the system under certain conditions (e.g. unconfigured pads).
+ * - The read/write/probe functions try to identify unconfigured bus.
+ * - Status functions now read irqstatus_raw as per TRM guidelines
+ * (except for OMAP243X and OMAP34XX).
+ * - Driver now supports up to I2C5 (OMAP5).
*/
#include <common.h>
@@ -31,8 +45,11 @@
#define I2C_TIMEOUT 1000
+/* Absolutely safe for status update at 100 kHz I2C: */
+#define I2C_WAIT 200
+
static int wait_for_bb(void);
-static u16 wait_for_pin(void);
+static u16 wait_for_event(void);
static void flush_fifo(void);
/*
@@ -137,10 +154,14 @@
/* own address */
writew(slaveadd, &i2c_base->oa);
writew(I2C_CON_EN, &i2c_base->con);
-
- /* have to enable intrrupts or OMAP i2c module doesn't work */
+#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX)
+ /*
+ * Have to enable interrupts for OMAP2/3, these IPs don't have
+ * an 'irqstatus_raw' register and we shall have to poll 'stat'
+ */
writew(I2C_IE_XRDY_IE | I2C_IE_RRDY_IE | I2C_IE_ARDY_IE |
- I2C_IE_NACK_IE | I2C_IE_AL_IE, &i2c_base->ie);
+ I2C_IE_NACK_IE | I2C_IE_AL_IE, &i2c_base->ie);
+#endif
udelay(1000);
flush_fifo();
writew(0xFFFF, &i2c_base->stat);
@@ -150,88 +171,6 @@
bus_initialized[current_bus] = 1;
}
-static int i2c_read_byte(u8 devaddr, u16 regoffset, u8 alen, u8 *value)
-{
- int i2c_error = 0;
- u16 status;
- int i = 2 - alen;
- u8 tmpbuf[2] = {(regoffset) >> 8, regoffset & 0xff};
- u16 w;
-
- /* wait until bus not busy */
- if (wait_for_bb())
- return 1;
-
- /* one byte only */
- writew(alen, &i2c_base->cnt);
- /* set slave address */
- writew(devaddr, &i2c_base->sa);
- /* no stop bit needed here */
- writew(I2C_CON_EN | I2C_CON_MST | I2C_CON_STT |
- I2C_CON_TRX, &i2c_base->con);
-
- /* send register offset */
- while (1) {
- status = wait_for_pin();
- if (status == 0 || status & I2C_STAT_NACK) {
- i2c_error = 1;
- goto read_exit;
- }
- if (status & I2C_STAT_XRDY) {
- w = tmpbuf[i++];
-#if !(defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
- defined(CONFIG_OMAP44XX) || defined(CONFIG_AM33XX) || \
- defined(CONFIG_OMAP54XX))
- w |= tmpbuf[i++] << 8;
-#endif
- writew(w, &i2c_base->data);
- writew(I2C_STAT_XRDY, &i2c_base->stat);
- }
- if (status & I2C_STAT_ARDY) {
- writew(I2C_STAT_ARDY, &i2c_base->stat);
- break;
- }
- }
-
- /* set slave address */
- writew(devaddr, &i2c_base->sa);
- /* read one byte from slave */
- writew(1, &i2c_base->cnt);
- /* need stop bit here */
- writew(I2C_CON_EN | I2C_CON_MST |
- I2C_CON_STT | I2C_CON_STP,
- &i2c_base->con);
-
- /* receive data */
- while (1) {
- status = wait_for_pin();
- if (status == 0 || status & I2C_STAT_NACK) {
- i2c_error = 1;
- goto read_exit;
- }
- if (status & I2C_STAT_RRDY) {
-#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
- defined(CONFIG_OMAP44XX) || defined(CONFIG_AM33XX) || \
- defined(CONFIG_OMAP54XX)
- *value = readb(&i2c_base->data);
-#else
- *value = readw(&i2c_base->data);
-#endif
- writew(I2C_STAT_RRDY, &i2c_base->stat);
- }
- if (status & I2C_STAT_ARDY) {
- writew(I2C_STAT_ARDY, &i2c_base->stat);
- break;
- }
- }
-
-read_exit:
- flush_fifo();
- writew(0xFFFF, &i2c_base->stat);
- writew(0, &i2c_base->cnt);
- return i2c_error;
-}
-
static void flush_fifo(void)
{ u16 stat;
@@ -241,13 +180,7 @@
while (1) {
stat = readw(&i2c_base->stat);
if (stat == I2C_STAT_RRDY) {
-#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
- defined(CONFIG_OMAP44XX) || defined(CONFIG_AM33XX) || \
- defined(CONFIG_OMAP54XX)
readb(&i2c_base->data);
-#else
- readw(&i2c_base->data);
-#endif
writew(I2C_STAT_RRDY, &i2c_base->stat);
udelay(1000);
} else
@@ -255,6 +188,10 @@
}
}
+/*
+ * i2c_probe: Use write access. Allows to identify addresses that are
+ * write-only (like the config register of dual-port EEPROMs)
+ */
int i2c_probe(uchar chip)
{
u16 status;
@@ -263,61 +200,81 @@
if (chip == readw(&i2c_base->oa))
return res;
- /* wait until bus not busy */
+ /* Wait until bus is free */
if (wait_for_bb())
return res;
- /* try to read one byte */
- writew(1, &i2c_base->cnt);
- /* set slave address */
+ /* No data transfer, slave addr only */
+ writew(0, &i2c_base->cnt);
+ /* Set slave address */
writew(chip, &i2c_base->sa);
- /* stop bit needed here */
- writew (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP, &i2c_base->con);
+ /* Stop bit needed here */
+ writew(I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX |
+ I2C_CON_STP, &i2c_base->con);
- while (1) {
- status = wait_for_pin();
- if (status == 0 || status & I2C_STAT_AL) {
- res = 1;
- goto probe_exit;
- }
- if (status & I2C_STAT_NACK) {
- res = 1;
- writew(0xff, &i2c_base->stat);
- writew (readw (&i2c_base->con) | I2C_CON_STP, &i2c_base->con);
+ status = wait_for_event();
- if (wait_for_bb())
- res = 1;
+ if ((status & ~I2C_STAT_XRDY) == 0 || (status & I2C_STAT_AL)) {
+ /*
+ * With current high-level command implementation, notifying
+ * the user shall flood the console with 127 messages. If
+ * silent exit is desired upon unconfigured bus, remove the
+ * following 'if' section:
+ */
+ if (status == I2C_STAT_XRDY)
+ printf("i2c_probe: pads on bus %d probably not configured (status=0x%x)\n",
+ current_bus, status);
- break;
- }
- if (status & I2C_STAT_ARDY) {
- writew(I2C_STAT_ARDY, &i2c_base->stat);
- break;
- }
- if (status & I2C_STAT_RRDY) {
- res = 0;
-#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
- defined(CONFIG_OMAP44XX) || defined(CONFIG_AM33XX) || \
- defined(CONFIG_OMAP54XX)
- readb(&i2c_base->data);
-#else
- readw(&i2c_base->data);
-#endif
- writew(I2C_STAT_RRDY, &i2c_base->stat);
- }
+ goto pr_exit;
}
-probe_exit:
+ /* Check for ACK (!NAK) */
+ if (!(status & I2C_STAT_NACK)) {
+ res = 0; /* Device found */
+ udelay(I2C_WAIT); /* Required by AM335X in SPL */
+ /* Abort transfer (force idle state) */
+ writew(I2C_CON_MST | I2C_CON_TRX, &i2c_base->con); /* Reset */
+ udelay(1000);
+ writew(I2C_CON_EN | I2C_CON_MST | I2C_CON_TRX |
+ I2C_CON_STP, &i2c_base->con); /* STP */
+ }
+pr_exit:
flush_fifo();
- /* don't allow any more data in... we don't want it. */
- writew(0, &i2c_base->cnt);
writew(0xFFFF, &i2c_base->stat);
+ writew(0, &i2c_base->cnt);
return res;
}
+/*
+ * i2c_read: Function now uses a single I2C read transaction with bulk transfer
+ * of the requested number of bytes (note that the 'i2c md' command
+ * limits this to 16 bytes anyway). If CONFIG_I2C_REPEATED_START is
+ * defined in the board config header, this transaction shall be with
+ * Repeated Start (Sr) between the address and data phases; otherwise
+ * Stop-Start (P-S) shall be used (some I2C chips do require a P-S).
+ * The address (reg offset) may be 0, 1 or 2 bytes long.
+ * Function now reads correctly from chips that return more than one
+ * byte of data per addressed register (like TI temperature sensors),
+ * or that do not need a register address at all (such as some clock
+ * distributors).
+ */
int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
{
- int i;
+ int i2c_error = 0;
+ u16 status;
+
+ if (alen < 0) {
+ puts("I2C read: addr len < 0\n");
+ return 1;
+ }
+ if (len < 0) {
+ puts("I2C read: data len < 0\n");
+ return 1;
+ }
+ if (buffer == NULL) {
+ puts("I2C read: NULL pointer passed\n");
+ return 1;
+ }
if (alen > 2) {
printf("I2C read: addr len %d not supported\n", alen);
@@ -329,24 +286,122 @@
return 1;
}
- for (i = 0; i < len; i++) {
- if (i2c_read_byte(chip, addr + i, alen, &buffer[i])) {
- puts("I2C read: I/O error\n");
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
- return 1;
+ /* Wait until bus not busy */
+ if (wait_for_bb())
+ return 1;
+
+ /* Zero, one or two bytes reg address (offset) */
+ writew(alen, &i2c_base->cnt);
+ /* Set slave address */
+ writew(chip, &i2c_base->sa);
+
+ if (alen) {
+ /* Must write reg offset first */
+#ifdef CONFIG_I2C_REPEATED_START
+ /* No stop bit, use Repeated Start (Sr) */
+ writew(I2C_CON_EN | I2C_CON_MST | I2C_CON_STT |
+ I2C_CON_TRX, &i2c_base->con);
+#else
+ /* Stop - Start (P-S) */
+ writew(I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP |
+ I2C_CON_TRX, &i2c_base->con);
+#endif
+ /* Send register offset */
+ while (1) {
+ status = wait_for_event();
+ /* Try to identify bus that is not padconf'd for I2C */
+ if (status == I2C_STAT_XRDY) {
+ i2c_error = 2;
+ printf("i2c_read (addr phase): pads on bus %d probably not configured (status=0x%x)\n",
+ current_bus, status);
+ goto rd_exit;
+ }
+ if (status == 0 || status & I2C_STAT_NACK) {
+ i2c_error = 1;
+ printf("i2c_read: error waiting for addr ACK (status=0x%x)\n",
+ status);
+ goto rd_exit;
+ }
+ if (alen) {
+ if (status & I2C_STAT_XRDY) {
+ alen--;
+ /* Do we have to use byte access? */
+ writeb((addr >> (8 * alen)) & 0xff,
+ &i2c_base->data);
+ writew(I2C_STAT_XRDY, &i2c_base->stat);
+ }
+ }
+ if (status & I2C_STAT_ARDY) {
+ writew(I2C_STAT_ARDY, &i2c_base->stat);
+ break;
+ }
+ }
+ }
+ /* Set slave address */
+ writew(chip, &i2c_base->sa);
+ /* Read len bytes from slave */
+ writew(len, &i2c_base->cnt);
+ /* Need stop bit here */
+ writew(I2C_CON_EN | I2C_CON_MST |
+ I2C_CON_STT | I2C_CON_STP,
+ &i2c_base->con);
+
+ /* Receive data */
+ while (1) {
+ status = wait_for_event();
+ /*
+ * Try to identify bus that is not padconf'd for I2C. This
+ * state could be left over from previous transactions if
+ * the address phase is skipped due to alen=0.
+ */
+ if (status == I2C_STAT_XRDY) {
+ i2c_error = 2;
+ printf("i2c_read (data phase): pads on bus %d probably not configured (status=0x%x)\n",
+ current_bus, status);
+ goto rd_exit;
+ }
+ if (status == 0 || status & I2C_STAT_NACK) {
+ i2c_error = 1;
+ goto rd_exit;
+ }
+ if (status & I2C_STAT_RRDY) {
+ *buffer++ = readb(&i2c_base->data);
+ writew(I2C_STAT_RRDY, &i2c_base->stat);
+ }
+ if (status & I2C_STAT_ARDY) {
+ writew(I2C_STAT_ARDY, &i2c_base->stat);
+ break;
}
}
- return 0;
+rd_exit:
+ flush_fifo();
+ writew(0xFFFF, &i2c_base->stat);
+ writew(0, &i2c_base->cnt);
+ return i2c_error;
}
+/* i2c_write: Address (reg offset) may be 0, 1 or 2 bytes long. */
int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
{
int i;
u16 status;
int i2c_error = 0;
- u16 w;
- u8 tmpbuf[2] = {addr >> 8, addr & 0xff};
+
+ if (alen < 0) {
+ puts("I2C write: addr len < 0\n");
+ return 1;
+ }
+
+ if (len < 0) {
+ puts("I2C write: data len < 0\n");
+ return 1;
+ }
+
+ if (buffer == NULL) {
+ puts("I2C write: NULL pointer passed\n");
+ return 1;
+ }
if (alen > 2) {
printf("I2C write: addr len %d not supported\n", alen);
@@ -355,92 +410,137 @@
if (addr + len > (1 << 16)) {
printf("I2C write: address 0x%x + 0x%x out of range\n",
- addr, len);
+ addr, len);
return 1;
}
- /* wait until bus not busy */
+ /* Wait until bus not busy */
if (wait_for_bb())
return 1;
- /* start address phase - will write regoffset + len bytes data */
- /* TODO consider case when !CONFIG_OMAP243X/34XX/44XX */
+ /* Start address phase - will write regoffset + len bytes data */
writew(alen + len, &i2c_base->cnt);
- /* set slave address */
+ /* Set slave address */
writew(chip, &i2c_base->sa);
- /* stop bit needed here */
+ /* Stop bit needed here */
writew(I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX |
- I2C_CON_STP, &i2c_base->con);
+ I2C_CON_STP, &i2c_base->con);
- /* Send address and data */
- for (i = -alen; i < len; i++) {
- status = wait_for_pin();
-
+ while (alen) {
+ /* Must write reg offset (one or two bytes) */
+ status = wait_for_event();
+ /* Try to identify bus that is not padconf'd for I2C */
+ if (status == I2C_STAT_XRDY) {
+ i2c_error = 2;
+ printf("i2c_write: pads on bus %d probably not configured (status=0x%x)\n",
+ current_bus, status);
+ goto wr_exit;
+ }
if (status == 0 || status & I2C_STAT_NACK) {
i2c_error = 1;
- printf("i2c error waiting for data ACK (status=0x%x)\n",
- status);
- goto write_exit;
+ printf("i2c_write: error waiting for addr ACK (status=0x%x)\n",
+ status);
+ goto wr_exit;
}
-
if (status & I2C_STAT_XRDY) {
- w = (i < 0) ? tmpbuf[2+i] : buffer[i];
-#if !(defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
- defined(CONFIG_OMAP44XX) || defined(CONFIG_AM33XX) || \
- defined(CONFIG_OMAP54XX))
- w |= ((++i < 0) ? tmpbuf[2+i] : buffer[i]) << 8;
-#endif
- writew(w, &i2c_base->data);
+ alen--;
+ writeb((addr >> (8 * alen)) & 0xff, &i2c_base->data);
writew(I2C_STAT_XRDY, &i2c_base->stat);
} else {
i2c_error = 1;
- printf("i2c bus not ready for Tx (i=%d)\n", i);
- goto write_exit;
+ printf("i2c_write: bus not ready for addr Tx (status=0x%x)\n",
+ status);
+ goto wr_exit;
+ }
+ }
+ /* Address phase is over, now write data */
+ for (i = 0; i < len; i++) {
+ status = wait_for_event();
+ if (status == 0 || status & I2C_STAT_NACK) {
+ i2c_error = 1;
+ printf("i2c_write: error waiting for data ACK (status=0x%x)\n",
+ status);
+ goto wr_exit;
+ }
+ if (status & I2C_STAT_XRDY) {
+ writeb(buffer[i], &i2c_base->data);
+ writew(I2C_STAT_XRDY, &i2c_base->stat);
+ } else {
+ i2c_error = 1;
+ printf("i2c_write: bus not ready for data Tx (i=%d)\n",
+ i);
+ goto wr_exit;
}
}
-write_exit:
+wr_exit:
flush_fifo();
writew(0xFFFF, &i2c_base->stat);
+ writew(0, &i2c_base->cnt);
return i2c_error;
}
+/*
+ * Wait for the bus to be free by checking the Bus Busy (BB)
+ * bit to become clear
+ */
static int wait_for_bb(void)
{
int timeout = I2C_TIMEOUT;
u16 stat;
writew(0xFFFF, &i2c_base->stat); /* clear current interrupts...*/
+#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX)
while ((stat = readw(&i2c_base->stat) & I2C_STAT_BB) && timeout--) {
+#else
+ /* Read RAW status */
+ while ((stat = readw(&i2c_base->irqstatus_raw) &
+ I2C_STAT_BB) && timeout--) {
+#endif
writew(stat, &i2c_base->stat);
- udelay(1000);
+ udelay(I2C_WAIT);
}
if (timeout <= 0) {
- printf("timed out in wait_for_bb: I2C_STAT=%x\n",
- readw(&i2c_base->stat));
+ printf("Timed out in wait_for_bb: status=%04x\n",
+ stat);
return 1;
}
writew(0xFFFF, &i2c_base->stat); /* clear delayed stuff*/
return 0;
}
-static u16 wait_for_pin(void)
+/*
+ * Wait for the I2C controller to complete current action
+ * and update status
+ */
+static u16 wait_for_event(void)
{
u16 status;
int timeout = I2C_TIMEOUT;
do {
- udelay(1000);
+ udelay(I2C_WAIT);
+#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX)
status = readw(&i2c_base->stat);
+#else
+ /* Read RAW status */
+ status = readw(&i2c_base->irqstatus_raw);
+#endif
} while (!(status &
(I2C_STAT_ROVR | I2C_STAT_XUDF | I2C_STAT_XRDY |
I2C_STAT_RRDY | I2C_STAT_ARDY | I2C_STAT_NACK |
I2C_STAT_AL)) && timeout--);
if (timeout <= 0) {
- printf("timed out in wait_for_pin: I2C_STAT=%x\n",
- readw(&i2c_base->stat));
+ printf("Timed out in wait_for_event: status=%04x\n",
+ status);
+ /*
+ * If status is still 0 here, probably the bus pads have
+ * not been configured for I2C, and/or pull-ups are missing.
+ */
+ printf("Check if pads/pull-ups of bus %d are properly configured\n",
+ current_bus);
writew(0xFFFF, &i2c_base->stat);
status = 0;
}
@@ -450,28 +550,36 @@
int i2c_set_bus_num(unsigned int bus)
{
- if ((bus < 0) || (bus >= I2C_BUS_MAX)) {
- printf("Bad bus: %d\n", bus);
+ if (bus >= I2C_BUS_MAX) {
+ printf("Bad bus: %x\n", bus);
return -1;
}
-#if I2C_BUS_MAX == 4
- if (bus == 3)
- i2c_base = (struct i2c *)I2C_BASE4;
- else
- if (bus == 2)
- i2c_base = (struct i2c *)I2C_BASE3;
- else
-#endif
-#if I2C_BUS_MAX == 3
- if (bus == 2)
- i2c_base = (struct i2c *)I2C_BASE3;
- else
-#endif
- if (bus == 1)
- i2c_base = (struct i2c *)I2C_BASE2;
- else
+ switch (bus) {
+ default:
+ bus = 0; /* Fall through */
+ case 0:
i2c_base = (struct i2c *)I2C_BASE1;
+ break;
+ case 1:
+ i2c_base = (struct i2c *)I2C_BASE2;
+ break;
+#if (I2C_BUS_MAX > 2)
+ case 2:
+ i2c_base = (struct i2c *)I2C_BASE3;
+ break;
+#if (I2C_BUS_MAX > 3)
+ case 3:
+ i2c_base = (struct i2c *)I2C_BASE4;
+ break;
+#if (I2C_BUS_MAX > 4)
+ case 4:
+ i2c_base = (struct i2c *)I2C_BASE5;
+ break;
+#endif
+#endif
+#endif
+ }
current_bus = bus;
diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c
index 46d2506..382e4c2 100644
--- a/drivers/i2c/s3c24x0_i2c.c
+++ b/drivers/i2c/s3c24x0_i2c.c
@@ -518,8 +518,9 @@
#ifdef CONFIG_OF_CONTROL
void board_i2c_init(const void *blob)
{
+ int i;
int node_list[CONFIG_MAX_I2C_NUM];
- int count, i;
+ int count;
count = fdtdec_find_aliases_for_id(blob, "i2c",
COMPAT_SAMSUNG_S3C2440_I2C, node_list,
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index 7cd4281..24648a2 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -25,14 +25,11 @@
LIB := $(obj)libmmc.o
-ifdef CONFIG_SPL_BUILD
-COBJS-$(CONFIG_SPL_MMC_SUPPORT) += spl_mmc.o
-endif
COBJS-$(CONFIG_BFIN_SDH) += bfin_sdh.o
COBJS-$(CONFIG_DAVINCI_MMC) += davinci_mmc.o
COBJS-$(CONFIG_FSL_ESDHC) += fsl_esdhc.o
-COBJS-$(CONFIG_FTSDC010) += ftsdc010_esdhc.o
+COBJS-$(CONFIG_FTSDC010) += ftsdc010_mci.o
COBJS-$(CONFIG_GENERIC_MMC) += mmc.o
COBJS-$(CONFIG_GENERIC_ATMEL_MCI) += gen_atmel_mci.o
COBJS-$(CONFIG_MMC_SPI) += mmc_spi.o
@@ -46,6 +43,7 @@
COBJS-$(CONFIG_BCM2835_SDHCI) += bcm2835_sdhci.o
COBJS-$(CONFIG_S5P_SDHCI) += s5p_sdhci.o
COBJS-$(CONFIG_SH_MMCIF) += sh_mmcif.o
+COBJS-$(CONFIG_SPEAR_SDHCI) += spear_sdhci.o
COBJS-$(CONFIG_TEGRA_MMC) += tegra_mmc.o
COBJS-$(CONFIG_DWMMC) += dw_mmc.o
COBJS-$(CONFIG_EXYNOS_DWMMC) += exynos_dw_mmc.o
diff --git a/drivers/mmc/davinci_mmc.c b/drivers/mmc/davinci_mmc.c
index e2379e3..5aa2184 100644
--- a/drivers/mmc/davinci_mmc.c
+++ b/drivers/mmc/davinci_mmc.c
@@ -285,8 +285,11 @@
*/
if (bytes_left > fifo_bytes)
dmmc_wait_fifo_status(regs, 0x4a);
- else if (bytes_left == fifo_bytes)
+ else if (bytes_left == fifo_bytes) {
dmmc_wait_fifo_status(regs, 0x40);
+ if (cmd->cmdidx == MMC_CMD_SEND_EXT_CSD)
+ udelay(600);
+ }
for (i = 0; bytes_left && (i < fifo_words); i++) {
cmddata = get_val(®s->mmcdrr);
diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c
index 4070d4e..5da20ed 100644
--- a/drivers/mmc/dw_mmc.c
+++ b/drivers/mmc/dw_mmc.c
@@ -129,13 +129,13 @@
unsigned int timeout = 100000;
u32 retry = 10000;
u32 mask, ctrl;
+ ulong start = get_timer(0);
while (dwmci_readl(host, DWMCI_STATUS) & DWMCI_BUSY) {
- if (timeout == 0) {
+ if (get_timer(start) > timeout) {
printf("Timeout on data busy\n");
return TIMEOUT;
}
- timeout--;
}
dwmci_writel(host, DWMCI_RINTSTS, DWMCI_INTMSK_ALL);
@@ -143,7 +143,6 @@
if (data)
dwmci_prepare_data(host, data);
-
dwmci_writel(host, DWMCI_CMDARG, cmd->cmdarg);
if (data)
@@ -231,9 +230,8 @@
int timeout = 10000;
unsigned long sclk;
- if (freq == host->clock)
+ if ((freq == host->clock) || (freq == 0))
return 0;
-
/*
* If host->mmc_clk didn't define,
* then assume that host->bus_hz is source clock value.
@@ -314,7 +312,7 @@
static int dwmci_init(struct mmc *mmc)
{
struct dwmci_host *host = (struct dwmci_host *)mmc->priv;
- u32 fifo_size, fifoth_val;
+ u32 fifo_size;
dwmci_writel(host, DWMCI_PWREN, 1);
@@ -323,6 +321,9 @@
return -1;
}
+ /* Enumerate at 400KHz */
+ dwmci_setup_bus(host, mmc->f_min);
+
dwmci_writel(host, DWMCI_RINTSTS, 0xFFFFFFFF);
dwmci_writel(host, DWMCI_INTMASK, 0);
@@ -331,13 +332,13 @@
dwmci_writel(host, DWMCI_IDINTEN, 0);
dwmci_writel(host, DWMCI_BMOD, 1);
- fifo_size = dwmci_readl(host, DWMCI_FIFOTH);
- if (host->fifoth_val)
- fifoth_val = host->fifoth_val;
- else
- fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size/2 -1) |
- TX_WMARK(fifo_size/2);
- dwmci_writel(host, DWMCI_FIFOTH, fifoth_val);
+ if (!host->fifoth_val) {
+ fifo_size = dwmci_readl(host, DWMCI_FIFOTH);
+ fifo_size = ((fifo_size & RX_WMARK_MASK) >> RX_WMARK_SHIFT) + 1;
+ host->fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size / 2 - 1) |
+ TX_WMARK(fifo_size / 2);
+ }
+ dwmci_writel(host, DWMCI_FIFOTH, host->fifoth_val);
dwmci_writel(host, DWMCI_CLKENA, 0);
dwmci_writel(host, DWMCI_CLKSRC, 0);
diff --git a/drivers/mmc/exynos_dw_mmc.c b/drivers/mmc/exynos_dw_mmc.c
index 72a31b7..4238dd9 100644
--- a/drivers/mmc/exynos_dw_mmc.c
+++ b/drivers/mmc/exynos_dw_mmc.c
@@ -19,39 +19,146 @@
*/
#include <common.h>
-#include <malloc.h>
#include <dwmmc.h>
+#include <fdtdec.h>
+#include <libfdt.h>
+#include <malloc.h>
#include <asm/arch/dwmmc.h>
#include <asm/arch/clk.h>
+#include <asm/arch/pinmux.h>
-static char *EXYNOS_NAME = "EXYNOS DWMMC";
+#define DWMMC_MAX_CH_NUM 4
+#define DWMMC_MAX_FREQ 52000000
+#define DWMMC_MIN_FREQ 400000
+#define DWMMC_MMC0_CLKSEL_VAL 0x03030001
+#define DWMMC_MMC2_CLKSEL_VAL 0x03020001
+/*
+ * Function used as callback function to initialise the
+ * CLKSEL register for every mmc channel.
+ */
static void exynos_dwmci_clksel(struct dwmci_host *host)
{
- u32 val;
- val = DWMCI_SET_SAMPLE_CLK(DWMCI_SHIFT_0) |
- DWMCI_SET_DRV_CLK(DWMCI_SHIFT_0) | DWMCI_SET_DIV_RATIO(0);
-
- dwmci_writel(host, DWMCI_CLKSEL, val);
+ dwmci_writel(host, DWMCI_CLKSEL, host->clksel_val);
}
-int exynos_dwmci_init(u32 regbase, int bus_width, int index)
+unsigned int exynos_dwmci_get_clk(int dev_index)
+{
+ return get_mmc_clk(dev_index);
+}
+
+/*
+ * This function adds the mmc channel to be registered with mmc core.
+ * index - mmc channel number.
+ * regbase - register base address of mmc channel specified in 'index'.
+ * bus_width - operating bus width of mmc channel specified in 'index'.
+ * clksel - value to be written into CLKSEL register in case of FDT.
+ * NULL in case od non-FDT.
+ */
+int exynos_dwmci_add_port(int index, u32 regbase, int bus_width, u32 clksel)
{
struct dwmci_host *host = NULL;
+ unsigned int div;
+ unsigned long freq, sclk;
host = malloc(sizeof(struct dwmci_host));
if (!host) {
printf("dwmci_host malloc fail!\n");
return 1;
}
+ /* request mmc clock vlaue of 52MHz. */
+ freq = 52000000;
+ sclk = get_mmc_clk(index);
+ div = DIV_ROUND_UP(sclk, freq);
+ /* set the clock divisor for mmc */
+ set_mmc_clk(index, div);
- host->name = EXYNOS_NAME;
+ host->name = "EXYNOS DWMMC";
host->ioaddr = (void *)regbase;
host->buswidth = bus_width;
+
+ if (clksel) {
+ host->clksel_val = clksel;
+ } else {
+ if (0 == index)
+ host->clksel_val = DWMMC_MMC0_CLKSEL_VAL;
+ if (2 == index)
+ host->clksel_val = DWMMC_MMC2_CLKSEL_VAL;
+ }
+
host->clksel = exynos_dwmci_clksel;
host->dev_index = index;
-
- add_dwmci(host, 52000000, 400000);
-
+ host->mmc_clk = exynos_dwmci_get_clk;
+ /* Add the mmc channel to be registered with mmc core */
+ if (add_dwmci(host, DWMMC_MAX_FREQ, DWMMC_MIN_FREQ)) {
+ debug("dwmmc%d registration failed\n", index);
+ return -1;
+ }
return 0;
}
+#ifdef CONFIG_OF_CONTROL
+int exynos_dwmmc_init(const void *blob)
+{
+ int index, bus_width;
+ int node_list[DWMMC_MAX_CH_NUM];
+ int err = 0, dev_id, flag, count, i;
+ u32 clksel_val, base, timing[3];
+
+ count = fdtdec_find_aliases_for_id(blob, "mmc",
+ COMPAT_SAMSUNG_EXYNOS5_DWMMC, node_list,
+ DWMMC_MAX_CH_NUM);
+
+ for (i = 0; i < count; i++) {
+ int node = node_list[i];
+
+ if (node <= 0)
+ continue;
+
+ /* Extract device id for each mmc channel */
+ dev_id = pinmux_decode_periph_id(blob, node);
+
+ /* Get the bus width from the device node */
+ bus_width = fdtdec_get_int(blob, node, "samsung,bus-width", 0);
+ if (bus_width <= 0) {
+ debug("DWMMC: Can't get bus-width\n");
+ return -1;
+ }
+ if (8 == bus_width)
+ flag = PINMUX_FLAG_8BIT_MODE;
+ else
+ flag = PINMUX_FLAG_NONE;
+
+ /* config pinmux for each mmc channel */
+ err = exynos_pinmux_config(dev_id, flag);
+ if (err) {
+ debug("DWMMC not configured\n");
+ return err;
+ }
+
+ index = dev_id - PERIPH_ID_SDMMC0;
+
+ /* Get the base address from the device node */
+ base = fdtdec_get_addr(blob, node, "reg");
+ if (!base) {
+ debug("DWMMC: Can't get base address\n");
+ return -1;
+ }
+ /* Extract the timing info from the node */
+ err = fdtdec_get_int_array(blob, node, "samsung,timing",
+ timing, 3);
+ if (err) {
+ debug("Can't get sdr-timings for divider\n");
+ return -1;
+ }
+
+ clksel_val = (DWMCI_SET_SAMPLE_CLK(timing[0]) |
+ DWMCI_SET_DRV_CLK(timing[1]) |
+ DWMCI_SET_DIV_RATIO(timing[2]));
+ /* Initialise each mmc channel */
+ err = exynos_dwmci_add_port(index, base, bus_width, clksel_val);
+ if (err)
+ debug("dwmmc Channel-%d init failed\n", index);
+ }
+ return 0;
+}
+#endif
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index e945c0a..861f4b9 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -178,7 +178,7 @@
int timeout;
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
-#ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO
+#ifdef CONFIG_SYS_FSL_ESDHC_USE_PIO
uint wml_value;
wml_value = data->blocksize/4;
@@ -601,8 +601,7 @@
{
struct fsl_esdhc_cfg *cfg;
- cfg = malloc(sizeof(struct fsl_esdhc_cfg));
- memset(cfg, 0, sizeof(struct fsl_esdhc_cfg));
+ cfg = calloc(sizeof(struct fsl_esdhc_cfg), 1);
cfg->esdhc_base = CONFIG_SYS_FSL_ESDHC_ADDR;
cfg->sdhc_clk = gd->arch.sdhc_clk;
return fsl_esdhc_initialize(bis, cfg);
diff --git a/drivers/mmc/ftsdc010_esdhc.c b/drivers/mmc/ftsdc010_esdhc.c
deleted file mode 100644
index 42f0e0c..0000000
--- a/drivers/mmc/ftsdc010_esdhc.c
+++ /dev/null
@@ -1,687 +0,0 @@
-/*
- * Copyright (C) 2011 Andes Technology Corporation
- * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <common.h>
-#include <mmc.h>
-
-#include <asm/io.h>
-#include <faraday/ftsdc010.h>
-
-/*
- * supported mmc hosts
- * setting the number CONFIG_FTSDC010_NUMBER in your configuration file.
- */
-static struct mmc ftsdc010_dev[CONFIG_FTSDC010_NUMBER];
-static struct mmc_host ftsdc010_host[CONFIG_FTSDC010_NUMBER];
-
-static struct ftsdc010_mmc *ftsdc010_get_base_mmc(int dev_index)
-{
- return (struct ftsdc010_mmc *)CONFIG_FTSDC010_BASE + dev_index;
-}
-
-#ifdef DEBUG
-static void ftsdc010_dump_reg(struct mmc_host *host)
-{
- debug("cmd: %08x\n", readl(&host->reg->cmd));
- debug("argu: %08x\n", readl(&host->reg->argu));
- debug("rsp0: %08x\n", readl(&host->reg->rsp0));
- debug("rsp1: %08x\n", readl(&host->reg->rsp1));
- debug("rsp2: %08x\n", readl(&host->reg->rsp2));
- debug("rsp3: %08x\n", readl(&host->reg->rsp3));
- debug("rsp_cmd: %08x\n", readl(&host->reg->rsp_cmd));
- debug("dcr: %08x\n", readl(&host->reg->dcr));
- debug("dtr: %08x\n", readl(&host->reg->dtr));
- debug("dlr: %08x\n", readl(&host->reg->dlr));
- debug("status: %08x\n", readl(&host->reg->status));
- debug("clr: %08x\n", readl(&host->reg->clr));
- debug("int_mask: %08x\n", readl(&host->reg->int_mask));
- debug("pcr: %08x\n", readl(&host->reg->pcr));
- debug("ccr: %08x\n", readl(&host->reg->ccr));
- debug("bwr: %08x\n", readl(&host->reg->bwr));
- debug("dwr: %08x\n", readl(&host->reg->dwr));
- debug("feature: %08x\n", readl(&host->reg->feature));
- debug("rev: %08x\n", readl(&host->reg->rev));
-}
-#endif
-
-static unsigned int enable_imask(struct ftsdc010_mmc *reg, unsigned int imask)
-{
- unsigned int newmask;
-
- newmask = readl(®->int_mask);
- newmask |= imask;
-
- writel(newmask, ®->int_mask);
-
- return newmask;
-}
-
-static void ftsdc010_pio_read(struct mmc_host *host, char *buf, unsigned int size)
-{
- unsigned int fifo;
- unsigned int fifo_words;
- unsigned int *ptr;
- unsigned int status;
- unsigned int retry = 0;
-
- /* get_data_buffer */
- ptr = (unsigned int *)buf;
-
- while (size) {
- status = readl(&host->reg->status);
- debug("%s: size: %08x\n", __func__, size);
-
- if (status & FTSDC010_STATUS_FIFO_ORUN) {
-
- debug("%s: FIFO OVERRUN: sta: %08x\n",
- __func__, status);
-
- fifo = host->fifo_len > size ?
- size : host->fifo_len;
-
- size -= fifo;
-
- fifo_words = fifo >> 2;
-
- while (fifo_words--)
- *ptr++ = readl(&host->reg->dwr);
-
- /*
- * for adding some delays for SD card to put
- * data into FIFO again
- */
- udelay(4*FTSDC010_DELAY_UNIT);
-
-#ifdef CONFIG_FTSDC010_SDIO
- /* sdio allow non-power-of-2 blksz */
- if (fifo & 3) {
- unsigned int n = fifo & 3;
- unsigned int data = readl(&host->reg->dwr);
-
- unsigned char *p = (unsigned char *)ptr;
-
- while (n--) {
- *p++ = data;
- data >>= 8;
- }
- }
-#endif
- } else {
- udelay(1);
- if (++retry >= FTSDC010_PIO_RETRY) {
- debug("%s: PIO_RETRY timeout\n", __func__);
- return;
- }
- }
- }
-}
-
-static void ftsdc010_pio_write(struct mmc_host *host, const char *buf,
- unsigned int size)
-{
- unsigned int fifo;
- unsigned int *ptr;
- unsigned int status;
- unsigned int retry = 0;
-
- /* get data buffer */
- ptr = (unsigned int *)buf;
-
- while (size) {
- status = readl(&host->reg->status);
-
- if (status & FTSDC010_STATUS_FIFO_URUN) {
- fifo = host->fifo_len > size ?
- size : host->fifo_len;
-
- size -= fifo;
-
- fifo = (fifo + 3) >> 2;
-
- while (fifo--) {
- writel(*ptr, &host->reg->dwr);
- ptr++;
- }
- } else {
- udelay(1);
- if (++retry >= FTSDC010_PIO_RETRY) {
- debug("%s: PIO_RETRY timeout\n", __func__);
- return;
- }
- }
- }
-}
-
-static int ftsdc010_check_rsp(struct mmc *mmc, struct mmc_cmd *cmd,
- struct mmc_data *data)
-{
- struct mmc_host *host = mmc->priv;
- unsigned int sta, clear;
-
- sta = readl(&host->reg->status);
- debug("%s: sta: %08x cmd %d\n", __func__, sta, cmd->cmdidx);
-
- /* check RSP TIMEOUT or FAIL */
- if (sta & FTSDC010_STATUS_RSP_TIMEOUT) {
- /* RSP TIMEOUT */
- debug("%s: RSP timeout: sta: %08x\n", __func__, sta);
-
- clear |= FTSDC010_CLR_RSP_TIMEOUT;
- writel(clear, &host->reg->clr);
-
- return TIMEOUT;
- } else if (sta & FTSDC010_STATUS_RSP_CRC_FAIL) {
- /* clear response fail bit */
- debug("%s: RSP CRC FAIL: sta: %08x\n", __func__, sta);
-
- clear |= FTSDC010_CLR_RSP_CRC_FAIL;
- writel(clear, &host->reg->clr);
-
- return COMM_ERR;
- } else if (sta & FTSDC010_STATUS_RSP_CRC_OK) {
-
- /* clear response CRC OK bit */
- clear |= FTSDC010_CLR_RSP_CRC_OK;
- }
-
- writel(clear, &host->reg->clr);
- return 0;
-}
-
-static int ftsdc010_check_data(struct mmc *mmc, struct mmc_cmd *cmd,
- struct mmc_data *data)
-{
- struct mmc_host *host = mmc->priv;
- unsigned int sta, clear;
-
- sta = readl(&host->reg->status);
- debug("%s: sta: %08x cmd %d\n", __func__, sta, cmd->cmdidx);
-
- /* check DATA TIMEOUT or FAIL */
- if (data) {
-
- /* Transfer Complete */
- if (sta & FTSDC010_STATUS_DATA_END)
- clear |= FTSDC010_STATUS_DATA_END;
-
- /* Data CRC_OK */
- if (sta & FTSDC010_STATUS_DATA_CRC_OK)
- clear |= FTSDC010_STATUS_DATA_CRC_OK;
-
- /* DATA TIMEOUT or DATA CRC FAIL */
- if (sta & FTSDC010_STATUS_DATA_TIMEOUT) {
- /* DATA TIMEOUT */
- debug("%s: DATA TIMEOUT: sta: %08x\n", __func__, sta);
-
- clear |= FTSDC010_STATUS_DATA_TIMEOUT;
- writel(clear, &host->reg->clr);
-
- return TIMEOUT;
- } else if (sta & FTSDC010_STATUS_DATA_CRC_FAIL) {
- /* DATA CRC FAIL */
- debug("%s: DATA CRC FAIL: sta: %08x\n", __func__, sta);
-
- clear |= FTSDC010_STATUS_DATA_CRC_FAIL;
- writel(clear, &host->reg->clr);
-
- return COMM_ERR;
- }
- writel(clear, &host->reg->clr);
- }
- return 0;
-}
-
-static int ftsdc010_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
- struct mmc_data *data)
-{
- struct mmc_host *host = mmc->priv;
-
-#ifdef CONFIG_FTSDC010_SDIO
- unsigned int scon;
-#endif
- unsigned int ccon;
- unsigned int mask, tmpmask;
- unsigned int ret;
- unsigned int sta, i;
-
- ret = 0;
-
- if (data)
- mask = FTSDC010_INT_MASK_RSP_TIMEOUT;
- else if (cmd->resp_type & MMC_RSP_PRESENT)
- mask = FTSDC010_INT_MASK_RSP_TIMEOUT;
- else
- mask = FTSDC010_INT_MASK_CMD_SEND;
-
- /* write argu reg */
- debug("%s: argu: %08x\n", __func__, host->reg->argu);
- writel(cmd->cmdarg, &host->reg->argu);
-
- /* setup commnad */
- ccon = FTSDC010_CMD_IDX(cmd->cmdidx);
-
- /* setup command flags */
- ccon |= FTSDC010_CMD_CMD_EN;
-
- /*
- * This hardware didn't support specific commands for mapping
- * MMC_RSP_BUSY and MMC_RSP_OPCODE. Hence we don't deal with it.
- */
- if (cmd->resp_type & MMC_RSP_PRESENT) {
- ccon |= FTSDC010_CMD_NEED_RSP;
- mask |= FTSDC010_INT_MASK_RSP_CRC_OK |
- FTSDC010_INT_MASK_RSP_CRC_FAIL;
- }
-
- if (cmd->resp_type & MMC_RSP_136)
- ccon |= FTSDC010_CMD_LONG_RSP;
-
- /* In Linux driver, MMC_CMD_APP_CMD is checked in last_opcode */
- if (host->last_opcode == MMC_CMD_APP_CMD)
- ccon |= FTSDC010_CMD_APP_CMD;
-
-#ifdef CONFIG_FTSDC010_SDIO
- scon = readl(&host->reg->sdio_ctrl1);
- if (host->card_type == MMC_TYPE_SDIO)
- scon |= FTSDC010_SDIO_CTRL1_SDIO_ENABLE;
- else
- scon &= ~FTSDC010_SDIO_CTRL1_SDIO_ENABLE;
- writel(scon, &host->reg->sdio_ctrl1);
-#endif
-
- /* record last opcode for specifing the command type to hardware */
- host->last_opcode = cmd->cmdidx;
-
- /* write int_mask reg */
- tmpmask = readl(&host->reg->int_mask);
- tmpmask |= mask;
- writel(tmpmask, &host->reg->int_mask);
-
- /* write cmd reg */
- debug("%s: ccon: %08x\n", __func__, ccon);
- writel(ccon, &host->reg->cmd);
-
- /* check CMD_SEND */
- for (i = 0; i < FTSDC010_CMD_RETRY; i++) {
- /*
- * If we read status register too fast
- * will lead hardware error and the RSP_TIMEOUT
- * flag will be raised incorrectly.
- */
- udelay(16*FTSDC010_DELAY_UNIT);
- sta = readl(&host->reg->status);
-
- /* Command Complete */
- /*
- * Note:
- * Do not clear FTSDC010_CLR_CMD_SEND flag.
- * (by writing FTSDC010_CLR_CMD_SEND bit to clear register)
- * It will make the driver becomes very slow.
- * If the operation hasn't been finished, hardware will
- * clear this bit automatically.
- * In origin, the driver will clear this flag if there is
- * no data need to be read.
- */
- if (sta & FTSDC010_STATUS_CMD_SEND)
- break;
- }
-
- if (i > FTSDC010_CMD_RETRY) {
- printf("%s: send command timeout\n", __func__);
- return TIMEOUT;
- }
-
- /* check rsp status */
- ret = ftsdc010_check_rsp(mmc, cmd, data);
- if (ret)
- return ret;
-
- /* read response if we have RSP_OK */
- if (ccon & FTSDC010_CMD_LONG_RSP) {
- cmd->response[0] = readl(&host->reg->rsp3);
- cmd->response[1] = readl(&host->reg->rsp2);
- cmd->response[2] = readl(&host->reg->rsp1);
- cmd->response[3] = readl(&host->reg->rsp0);
- } else {
- cmd->response[0] = readl(&host->reg->rsp0);
- }
-
- /* read/write data */
- if (data && (data->flags & MMC_DATA_READ)) {
- ftsdc010_pio_read(host, data->dest,
- data->blocksize * data->blocks);
- } else if (data && (data->flags & MMC_DATA_WRITE)) {
- ftsdc010_pio_write(host, data->src,
- data->blocksize * data->blocks);
- }
-
- /* check data status */
- if (data) {
- ret = ftsdc010_check_data(mmc, cmd, data);
- if (ret)
- return ret;
- }
-
- udelay(FTSDC010_DELAY_UNIT);
- return ret;
-}
-
-static unsigned int cal_blksz(unsigned int blksz)
-{
- unsigned int blksztwo = 0;
-
- while (blksz >>= 1)
- blksztwo++;
-
- return blksztwo;
-}
-
-static int ftsdc010_setup_data(struct mmc *mmc, struct mmc_data *data)
-{
- struct mmc_host *host = mmc->priv;
- unsigned int dcon, newmask;
-
- /* configure data transfer paramter */
- if (!data)
- return 0;
-
- if (((data->blocksize - 1) & data->blocksize) != 0) {
- printf("%s: can't do non-power-of 2 sized block transfers"
- " (blksz %d)\n", __func__, data->blocksize);
- return -1;
- }
-
- /*
- * We cannot deal with unaligned blocks with more than
- * one block being transfered.
- */
- if ((data->blocksize <= 2) && (data->blocks > 1)) {
- printf("%s: can't do non-word sized block transfers"
- " (blksz %d)\n", __func__, data->blocksize);
- return -1;
- }
-
- /* data length */
- dcon = data->blocksize * data->blocks;
- writel(dcon, &host->reg->dlr);
-
- /* write data control */
- dcon = cal_blksz(data->blocksize);
-
- /* add to IMASK register */
- newmask = (FTSDC010_STATUS_RSP_CRC_FAIL | FTSDC010_STATUS_DATA_TIMEOUT);
-
- /*
- * enable UNDERRUN will trigger interrupt immediatedly
- * So setup it when rsp is received successfully
- */
- if (data->flags & MMC_DATA_WRITE) {
- dcon |= FTSDC010_DCR_DATA_WRITE;
- } else {
- dcon &= ~FTSDC010_DCR_DATA_WRITE;
- newmask |= FTSDC010_STATUS_FIFO_ORUN;
- }
- enable_imask(host->reg, newmask);
-
-#ifdef CONFIG_FTSDC010_SDIO
- /* always reset fifo since last transfer may fail */
- dcon |= FTSDC010_DCR_FIFO_RST;
-
- if (data->blocks > 1)
- dcon |= FTSDC010_SDIO_CTRL1_SDIO_BLK_MODE;
-#endif
-
- /* enable data transfer which will be pended until cmd is send */
- dcon |= FTSDC010_DCR_DATA_EN;
- writel(dcon, &host->reg->dcr);
-
- return 0;
-}
-
-static int ftsdc010_send_request(struct mmc *mmc, struct mmc_cmd *cmd,
- struct mmc_data *data)
-{
- int ret;
-
- if (data) {
- ret = ftsdc010_setup_data(mmc, data);
-
- if (ret) {
- printf("%s: setup data error\n", __func__);
- return -1;
- }
-
- if ((data->flags & MMC_DATA_BOTH_DIR) == MMC_DATA_BOTH_DIR) {
- printf("%s: data is both direction\n", __func__);
- return -1;
- }
- }
-
- /* Send command */
- ret = ftsdc010_send_cmd(mmc, cmd, data);
- return ret;
-}
-
-static int ftsdc010_card_detect(struct mmc *mmc)
-{
- struct mmc_host *host = mmc->priv;
- unsigned int sta;
-
- sta = readl(&host->reg->status);
- debug("%s: card status: %08x\n", __func__, sta);
-
- return (sta & FTSDC010_STATUS_CARD_DETECT) ? 0 : 1;
-}
-
-static int ftsdc010_request(struct mmc *mmc, struct mmc_cmd *cmd,
- struct mmc_data *data)
-{
- int ret;
-
- if (ftsdc010_card_detect(mmc) == 0) {
- printf("%s: no medium present\n", __func__);
- return -1;
- } else {
- ret = ftsdc010_send_request(mmc, cmd, data);
- return ret;
- }
-}
-
-static void ftsdc010_set_clk(struct mmc *mmc)
-{
- struct mmc_host *host = mmc->priv;
- unsigned char clk_div;
- unsigned int real_rate;
- unsigned int clock;
-
- debug("%s: mmc_set_clock: %x\n", __func__, mmc->clock);
- clock = readl(&host->reg->ccr);
-
- if (mmc->clock == 0) {
- real_rate = 0;
- clock |= FTSDC010_CCR_CLK_DIS;
- } else {
- debug("%s, mmc->clock: %08x, origin clock: %08x\n",
- __func__, mmc->clock, clock);
-
- for (clk_div = 0; clk_div <= 127; clk_div++) {
- real_rate = (CONFIG_SYS_CLK_FREQ / 2) /
- (2 * (clk_div + 1));
-
- if (real_rate <= mmc->clock)
- break;
- }
-
- debug("%s: computed real_rate: %x, clk_div: %x\n",
- __func__, real_rate, clk_div);
-
- if (clk_div > 127)
- debug("%s: no match clock rate, %x\n",
- __func__, mmc->clock);
-
- clock = (clock & ~FTSDC010_CCR_CLK_DIV(0x7f)) |
- FTSDC010_CCR_CLK_DIV(clk_div);
-
- clock &= ~FTSDC010_CCR_CLK_DIS;
- }
-
- debug("%s, set clock: %08x\n", __func__, clock);
- writel(clock, &host->reg->ccr);
-}
-
-static void ftsdc010_set_ios(struct mmc *mmc)
-{
- struct mmc_host *host = mmc->priv;
- unsigned int power;
- unsigned long val;
- unsigned int bus_width;
-
- debug("%s: bus_width: %x, clock: %d\n",
- __func__, mmc->bus_width, mmc->clock);
-
- /* set pcr: power on */
- power = readl(&host->reg->pcr);
- power |= FTSDC010_PCR_POWER_ON;
- writel(power, &host->reg->pcr);
-
- if (mmc->clock)
- ftsdc010_set_clk(mmc);
-
- /* set bwr: bus width reg */
- bus_width = readl(&host->reg->bwr);
- bus_width &= ~(FTSDC010_BWR_WIDE_8_BUS | FTSDC010_BWR_WIDE_4_BUS |
- FTSDC010_BWR_SINGLE_BUS);
-
- if (mmc->bus_width == 8)
- bus_width |= FTSDC010_BWR_WIDE_8_BUS;
- else if (mmc->bus_width == 4)
- bus_width |= FTSDC010_BWR_WIDE_4_BUS;
- else
- bus_width |= FTSDC010_BWR_SINGLE_BUS;
-
- writel(bus_width, &host->reg->bwr);
-
- /* set fifo depth */
- val = readl(&host->reg->feature);
- host->fifo_len = FTSDC010_FEATURE_FIFO_DEPTH(val) * 4; /* 4 bytes */
-
- /* set data timeout register */
- val = -1;
- writel(val, &host->reg->dtr);
-}
-
-static void ftsdc010_reset(struct mmc_host *host)
-{
- unsigned int timeout;
- unsigned int sta;
-
- /* Do SDC_RST: Software reset for all register */
- writel(FTSDC010_CMD_SDC_RST, &host->reg->cmd);
-
- host->clock = 0;
-
- /* this hardware has no reset finish flag to read */
- /* wait 100ms maximum */
- timeout = 100;
-
- /* hw clears the bit when it's done */
- while (readl(&host->reg->dtr) != 0) {
- if (timeout == 0) {
- printf("%s: reset timeout error\n", __func__);
- return;
- }
- timeout--;
- udelay(10*FTSDC010_DELAY_UNIT);
- }
-
- sta = readl(&host->reg->status);
- if (sta & FTSDC010_STATUS_CARD_CHANGE)
- writel(FTSDC010_CLR_CARD_CHANGE, &host->reg->clr);
-}
-
-static int ftsdc010_core_init(struct mmc *mmc)
-{
- struct mmc_host *host = mmc->priv;
- unsigned int mask;
- unsigned int major, minor, revision;
-
- /* get hardware version */
- host->version = readl(&host->reg->rev);
-
- major = FTSDC010_REV_MAJOR(host->version);
- minor = FTSDC010_REV_MINOR(host->version);
- revision = FTSDC010_REV_REVISION(host->version);
-
- printf("ftsdc010 hardware ver: %d_%d_r%d\n", major, minor, revision);
-
- /* Interrupt MASK register init - mask all */
- writel(0x0, &host->reg->int_mask);
-
- mask = FTSDC010_INT_MASK_CMD_SEND |
- FTSDC010_INT_MASK_DATA_END |
- FTSDC010_INT_MASK_CARD_CHANGE;
-#ifdef CONFIG_FTSDC010_SDIO
- mask |= FTSDC010_INT_MASK_CP_READY |
- FTSDC010_INT_MASK_CP_BUF_READY |
- FTSDC010_INT_MASK_PLAIN_TEXT_READY |
- FTSDC010_INT_MASK_SDIO_IRPT;
-#endif
-
- writel(mask, &host->reg->int_mask);
-
- return 0;
-}
-
-int ftsdc010_mmc_init(int dev_index)
-{
- struct mmc *mmc;
- struct mmc_host *host;
-
- mmc = &ftsdc010_dev[dev_index];
-
- sprintf(mmc->name, "FTSDC010 SD/MMC");
- mmc->priv = &ftsdc010_host[dev_index];
- mmc->send_cmd = ftsdc010_request;
- mmc->set_ios = ftsdc010_set_ios;
- mmc->init = ftsdc010_core_init;
- mmc->getcd = NULL;
- mmc->getwp = NULL;
-
- mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
-
- mmc->host_caps = MMC_MODE_4BIT | MMC_MODE_8BIT;
-
- mmc->f_min = CONFIG_SYS_CLK_FREQ / 2 / (2*128);
- mmc->f_max = CONFIG_SYS_CLK_FREQ / 2 / 2;
-
- ftsdc010_host[dev_index].clock = 0;
- ftsdc010_host[dev_index].reg = ftsdc010_get_base_mmc(dev_index);
- mmc_register(mmc);
-
- /* reset mmc */
- host = (struct mmc_host *)mmc->priv;
- ftsdc010_reset(host);
-
- return 0;
-}
diff --git a/drivers/mmc/ftsdc010_mci.c b/drivers/mmc/ftsdc010_mci.c
new file mode 100644
index 0000000..562b14a
--- /dev/null
+++ b/drivers/mmc/ftsdc010_mci.c
@@ -0,0 +1,377 @@
+/*
+ * Faraday MMC/SD Host Controller
+ *
+ * (C) Copyright 2010 Faraday Technology
+ * Dante Su <dantesu@faraday-tech.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <part.h>
+#include <mmc.h>
+
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <asm/byteorder.h>
+#include <faraday/ftsdc010.h>
+
+#define CFG_CMD_TIMEOUT (CONFIG_SYS_HZ >> 4) /* 250 ms */
+#define CFG_RST_TIMEOUT CONFIG_SYS_HZ /* 1 sec reset timeout */
+
+struct ftsdc010_chip {
+ void __iomem *regs;
+ uint32_t wprot; /* write protected (locked) */
+ uint32_t rate; /* actual SD clock in Hz */
+ uint32_t sclk; /* FTSDC010 source clock in Hz */
+ uint32_t fifo; /* fifo depth in bytes */
+ uint32_t acmd;
+};
+
+static inline int ftsdc010_send_cmd(struct mmc *mmc, struct mmc_cmd *mmc_cmd)
+{
+ struct ftsdc010_chip *chip = mmc->priv;
+ struct ftsdc010_mmc __iomem *regs = chip->regs;
+ int ret = TIMEOUT;
+ uint32_t ts, st;
+ uint32_t cmd = FTSDC010_CMD_IDX(mmc_cmd->cmdidx);
+ uint32_t arg = mmc_cmd->cmdarg;
+ uint32_t flags = mmc_cmd->resp_type;
+
+ cmd |= FTSDC010_CMD_CMD_EN;
+
+ if (chip->acmd) {
+ cmd |= FTSDC010_CMD_APP_CMD;
+ chip->acmd = 0;
+ }
+
+ if (flags & MMC_RSP_PRESENT)
+ cmd |= FTSDC010_CMD_NEED_RSP;
+
+ if (flags & MMC_RSP_136)
+ cmd |= FTSDC010_CMD_LONG_RSP;
+
+ writel(FTSDC010_STATUS_RSP_MASK | FTSDC010_STATUS_CMD_SEND,
+ ®s->clr);
+ writel(arg, ®s->argu);
+ writel(cmd, ®s->cmd);
+
+ if (!(flags & (MMC_RSP_PRESENT | MMC_RSP_136))) {
+ for (ts = get_timer(0); get_timer(ts) < CFG_CMD_TIMEOUT; ) {
+ if (readl(®s->status) & FTSDC010_STATUS_CMD_SEND) {
+ writel(FTSDC010_STATUS_CMD_SEND, ®s->clr);
+ ret = 0;
+ break;
+ }
+ }
+ } else {
+ st = 0;
+ for (ts = get_timer(0); get_timer(ts) < CFG_CMD_TIMEOUT; ) {
+ st = readl(®s->status);
+ writel(st & FTSDC010_STATUS_RSP_MASK, ®s->clr);
+ if (st & FTSDC010_STATUS_RSP_MASK)
+ break;
+ }
+ if (st & FTSDC010_STATUS_RSP_CRC_OK) {
+ if (flags & MMC_RSP_136) {
+ mmc_cmd->response[0] = readl(®s->rsp3);
+ mmc_cmd->response[1] = readl(®s->rsp2);
+ mmc_cmd->response[2] = readl(®s->rsp1);
+ mmc_cmd->response[3] = readl(®s->rsp0);
+ } else {
+ mmc_cmd->response[0] = readl(®s->rsp0);
+ }
+ ret = 0;
+ } else {
+ debug("ftsdc010: rsp err (cmd=%d, st=0x%x)\n",
+ mmc_cmd->cmdidx, st);
+ }
+ }
+
+ if (ret) {
+ debug("ftsdc010: cmd timeout (op code=%d)\n",
+ mmc_cmd->cmdidx);
+ } else if (mmc_cmd->cmdidx == MMC_CMD_APP_CMD) {
+ chip->acmd = 1;
+ }
+
+ return ret;
+}
+
+static void ftsdc010_clkset(struct mmc *mmc, uint32_t rate)
+{
+ struct ftsdc010_chip *chip = mmc->priv;
+ struct ftsdc010_mmc __iomem *regs = chip->regs;
+ uint32_t div;
+
+ for (div = 0; div < 0x7f; ++div) {
+ if (rate >= chip->sclk / (2 * (div + 1)))
+ break;
+ }
+ chip->rate = chip->sclk / (2 * (div + 1));
+
+ writel(FTSDC010_CCR_CLK_DIV(div), ®s->ccr);
+
+ if (IS_SD(mmc)) {
+ setbits_le32(®s->ccr, FTSDC010_CCR_CLK_SD);
+
+ if (chip->rate > 25000000)
+ setbits_le32(®s->ccr, FTSDC010_CCR_CLK_HISPD);
+ else
+ clrbits_le32(®s->ccr, FTSDC010_CCR_CLK_HISPD);
+ }
+}
+
+static inline int ftsdc010_is_ro(struct mmc *mmc)
+{
+ struct ftsdc010_chip *chip = mmc->priv;
+ const uint8_t *csd = (const uint8_t *)mmc->csd;
+
+ return chip->wprot || (csd[1] & 0x30);
+}
+
+static int ftsdc010_wait(struct ftsdc010_mmc __iomem *regs, uint32_t mask)
+{
+ int ret = TIMEOUT;
+ uint32_t st, ts;
+
+ for (ts = get_timer(0); get_timer(ts) < CFG_CMD_TIMEOUT; ) {
+ st = readl(®s->status);
+ if (!(st & mask))
+ continue;
+ writel(st & mask, ®s->clr);
+ ret = 0;
+ break;
+ }
+
+ if (ret)
+ debug("ftsdc010: wait st(0x%x) timeout\n", mask);
+
+ return ret;
+}
+
+/*
+ * u-boot mmc api
+ */
+
+static int ftsdc010_request(struct mmc *mmc, struct mmc_cmd *cmd,
+ struct mmc_data *data)
+{
+ int ret = UNUSABLE_ERR;
+ uint32_t len = 0;
+ struct ftsdc010_chip *chip = mmc->priv;
+ struct ftsdc010_mmc __iomem *regs = chip->regs;
+
+ if (data && (data->flags & MMC_DATA_WRITE) && chip->wprot) {
+ printf("ftsdc010: the card is write protected!\n");
+ return ret;
+ }
+
+ if (data) {
+ uint32_t dcr;
+
+ len = data->blocksize * data->blocks;
+
+ /* 1. data disable + fifo reset */
+ writel(FTSDC010_DCR_FIFO_RST, ®s->dcr);
+
+ /* 2. clear status register */
+ writel(FTSDC010_STATUS_DATA_MASK | FTSDC010_STATUS_FIFO_URUN
+ | FTSDC010_STATUS_FIFO_ORUN, ®s->clr);
+
+ /* 3. data timeout (1 sec) */
+ writel(chip->rate, ®s->dtr);
+
+ /* 4. data length (bytes) */
+ writel(len, ®s->dlr);
+
+ /* 5. data enable */
+ dcr = (ffs(data->blocksize) - 1) | FTSDC010_DCR_DATA_EN;
+ if (data->flags & MMC_DATA_WRITE)
+ dcr |= FTSDC010_DCR_DATA_WRITE;
+ writel(dcr, ®s->dcr);
+ }
+
+ ret = ftsdc010_send_cmd(mmc, cmd);
+ if (ret) {
+ printf("ftsdc010: CMD%d failed\n", cmd->cmdidx);
+ return ret;
+ }
+
+ if (!data)
+ return ret;
+
+ if (data->flags & MMC_DATA_WRITE) {
+ const uint8_t *buf = (const uint8_t *)data->src;
+
+ while (len > 0) {
+ int wlen;
+
+ /* wait for tx ready */
+ ret = ftsdc010_wait(regs, FTSDC010_STATUS_FIFO_URUN);
+ if (ret)
+ break;
+
+ /* write bytes to ftsdc010 */
+ for (wlen = 0; wlen < len && wlen < chip->fifo; ) {
+ writel(*(uint32_t *)buf, ®s->dwr);
+ buf += 4;
+ wlen += 4;
+ }
+
+ len -= wlen;
+ }
+
+ } else {
+ uint8_t *buf = (uint8_t *)data->dest;
+
+ while (len > 0) {
+ int rlen;
+
+ /* wait for rx ready */
+ ret = ftsdc010_wait(regs, FTSDC010_STATUS_FIFO_ORUN);
+ if (ret)
+ break;
+
+ /* fetch bytes from ftsdc010 */
+ for (rlen = 0; rlen < len && rlen < chip->fifo; ) {
+ *(uint32_t *)buf = readl(®s->dwr);
+ buf += 4;
+ rlen += 4;
+ }
+
+ len -= rlen;
+ }
+
+ }
+
+ if (!ret) {
+ ret = ftsdc010_wait(regs,
+ FTSDC010_STATUS_DATA_END | FTSDC010_STATUS_DATA_ERROR);
+ }
+
+ return ret;
+}
+
+static void ftsdc010_set_ios(struct mmc *mmc)
+{
+ struct ftsdc010_chip *chip = mmc->priv;
+ struct ftsdc010_mmc __iomem *regs = chip->regs;
+
+ ftsdc010_clkset(mmc, mmc->clock);
+
+ clrbits_le32(®s->bwr, FTSDC010_BWR_MODE_MASK);
+ switch (mmc->bus_width) {
+ case 4:
+ setbits_le32(®s->bwr, FTSDC010_BWR_MODE_4BIT);
+ break;
+ case 8:
+ setbits_le32(®s->bwr, FTSDC010_BWR_MODE_8BIT);
+ break;
+ default:
+ setbits_le32(®s->bwr, FTSDC010_BWR_MODE_1BIT);
+ break;
+ }
+}
+
+static int ftsdc010_init(struct mmc *mmc)
+{
+ struct ftsdc010_chip *chip = mmc->priv;
+ struct ftsdc010_mmc __iomem *regs = chip->regs;
+ uint32_t ts;
+
+ if (readl(®s->status) & FTSDC010_STATUS_CARD_DETECT)
+ return NO_CARD_ERR;
+
+ if (readl(®s->status) & FTSDC010_STATUS_WRITE_PROT) {
+ printf("ftsdc010: write protected\n");
+ chip->wprot = 1;
+ }
+
+ chip->fifo = (readl(®s->feature) & 0xff) << 2;
+
+ /* 1. chip reset */
+ writel(FTSDC010_CMD_SDC_RST, ®s->cmd);
+ for (ts = get_timer(0); get_timer(ts) < CFG_RST_TIMEOUT; ) {
+ if (readl(®s->cmd) & FTSDC010_CMD_SDC_RST)
+ continue;
+ break;
+ }
+ if (readl(®s->cmd) & FTSDC010_CMD_SDC_RST) {
+ printf("ftsdc010: reset failed\n");
+ return UNUSABLE_ERR;
+ }
+
+ /* 2. enter low speed mode (400k card detection) */
+ ftsdc010_clkset(mmc, 400000);
+
+ /* 3. interrupt disabled */
+ writel(0, ®s->int_mask);
+
+ return 0;
+}
+
+int ftsdc010_mmc_init(int devid)
+{
+ struct mmc *mmc;
+ struct ftsdc010_chip *chip;
+ struct ftsdc010_mmc __iomem *regs;
+#ifdef CONFIG_FTSDC010_BASE_LIST
+ uint32_t base_list[] = CONFIG_FTSDC010_BASE_LIST;
+
+ if (devid < 0 || devid >= ARRAY_SIZE(base_list))
+ return -1;
+ regs = (void __iomem *)base_list[devid];
+#else
+ regs = (void __iomem *)(CONFIG_FTSDC010_BASE + (devid << 20));
+#endif
+
+ mmc = malloc(sizeof(struct mmc));
+ if (!mmc)
+ return -ENOMEM;
+ memset(mmc, 0, sizeof(struct mmc));
+
+ chip = malloc(sizeof(struct ftsdc010_chip));
+ if (!chip) {
+ free(mmc);
+ return -ENOMEM;
+ }
+ memset(chip, 0, sizeof(struct ftsdc010_chip));
+
+ chip->regs = regs;
+ mmc->priv = chip;
+
+ sprintf(mmc->name, "ftsdc010");
+ mmc->send_cmd = ftsdc010_request;
+ mmc->set_ios = ftsdc010_set_ios;
+ mmc->init = ftsdc010_init;
+
+ mmc->host_caps = MMC_MODE_HS | MMC_MODE_HS_52MHz;
+ switch (readl(®s->bwr) & FTSDC010_BWR_CAPS_MASK) {
+ case FTSDC010_BWR_CAPS_4BIT:
+ mmc->host_caps |= MMC_MODE_4BIT;
+ break;
+ case FTSDC010_BWR_CAPS_8BIT:
+ mmc->host_caps |= MMC_MODE_4BIT | MMC_MODE_8BIT;
+ break;
+ default:
+ break;
+ }
+
+#ifdef CONFIG_SYS_CLK_FREQ
+ chip->sclk = CONFIG_SYS_CLK_FREQ;
+#else
+ chip->sclk = clk_get_rate("SDC");
+#endif
+
+ mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
+ mmc->f_max = chip->sclk / 2;
+ mmc->f_min = chip->sclk / 0x100;
+ mmc->block_dev.part_type = PART_TYPE_DOS;
+
+ mmc_register(mmc);
+
+ return 0;
+}
diff --git a/drivers/mmc/gen_atmel_mci.c b/drivers/mmc/gen_atmel_mci.c
index 70a9f91..77ebf17 100644
--- a/drivers/mmc/gen_atmel_mci.c
+++ b/drivers/mmc/gen_atmel_mci.c
@@ -50,6 +50,12 @@
static int initialized = 0;
+/* Read Atmel MCI IP version */
+static unsigned int atmel_mci_get_version(struct atmel_mci *mci)
+{
+ return readl(&mci->version) & 0x00000fff;
+}
+
/*
* Print command and status:
*
@@ -205,7 +211,10 @@
/* Wait for the command to complete */
while (!((status = readl(&mci->sr)) & MMCI_BIT(CMDRDY)));
- if (status & error_flags) {
+ if ((status & error_flags) & MMCI_BIT(RTOE)) {
+ dump_cmd(cmdr, cmd->cmdarg, status, "Command Time Out");
+ return TIMEOUT;
+ } else if (status & error_flags) {
dump_cmd(cmdr, cmd->cmdarg, status, "Command Failed");
return COMM_ERR;
}
@@ -297,7 +306,9 @@
static void mci_set_ios(struct mmc *mmc)
{
atmel_mci_t *mci = (atmel_mci_t *)mmc->priv;
- int busw = (mmc->bus_width == 4) ? 1 : 0;
+ int bus_width = mmc->bus_width;
+ unsigned int version = atmel_mci_get_version(mci);
+ int busw;
/* Set the clock speed */
mci_set_mode(mmc, mmc->clock, MMC_DEFAULT_BLKLEN);
@@ -305,9 +316,26 @@
/*
* set the bus width and select slot for this interface
* there is no capability for multiple slots on the same interface yet
- * Bitfield SCDBUS needs to be expanded to 2 bits for 8-bit buses
*/
- writel(MMCI_BF(SCDBUS, busw) | MMCI_BF(SCDSEL, MCI_BUS), &mci->sdcr);
+ if ((version & 0xf00) >= 0x300) {
+ switch (bus_width) {
+ case 8:
+ busw = 3;
+ break;
+ case 4:
+ busw = 2;
+ break;
+ default:
+ busw = 0;
+ break;
+ }
+
+ writel(busw << 6 | MMCI_BF(SCDSEL, MCI_BUS), &mci->sdcr);
+ } else {
+ busw = (bus_width == 4) ? 1 : 0;
+
+ writel(busw << 7 | MMCI_BF(SCDSEL, MCI_BUS), &mci->sdcr);
+ }
}
/* Entered into mmc structure during driver init */
@@ -340,9 +368,12 @@
int atmel_mci_init(void *regs)
{
struct mmc *mmc = malloc(sizeof(struct mmc));
+ struct atmel_mci *mci;
+ unsigned int version;
if (!mmc)
return -1;
+
strcpy(mmc->name, "mci");
mmc->priv = regs;
mmc->send_cmd = mci_send_cmd;
@@ -353,7 +384,13 @@
/* need to be able to pass these in on a board by board basis */
mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
- mmc->host_caps = MMC_MODE_4BIT;
+ mci = (struct atmel_mci *)mmc->priv;
+ version = atmel_mci_get_version(mci);
+ if ((version & 0xf00) >= 0x300)
+ mmc->host_caps = MMC_MODE_8BIT;
+
+ mmc->host_caps |= MMC_MODE_4BIT;
+
/*
* min and max frequencies determined by
* max and min of clock divider
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index 2590f1b..a492bbb 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -524,48 +524,70 @@
return 0;
}
-static int mmc_send_op_cond(struct mmc *mmc)
+/* We pass in the cmd since otherwise the init seems to fail */
+static int mmc_send_op_cond_iter(struct mmc *mmc, struct mmc_cmd *cmd,
+ int use_arg)
{
- int timeout = 10000;
- struct mmc_cmd cmd;
int err;
+ cmd->cmdidx = MMC_CMD_SEND_OP_COND;
+ cmd->resp_type = MMC_RSP_R3;
+ cmd->cmdarg = 0;
+ if (use_arg && !mmc_host_is_spi(mmc)) {
+ cmd->cmdarg =
+ (mmc->voltages &
+ (mmc->op_cond_response & OCR_VOLTAGE_MASK)) |
+ (mmc->op_cond_response & OCR_ACCESS_MODE);
+
+ if (mmc->host_caps & MMC_MODE_HC)
+ cmd->cmdarg |= OCR_HCS;
+ }
+ err = mmc_send_cmd(mmc, cmd, NULL);
+ if (err)
+ return err;
+ mmc->op_cond_response = cmd->response[0];
+ return 0;
+}
+
+int mmc_send_op_cond(struct mmc *mmc)
+{
+ struct mmc_cmd cmd;
+ int err, i;
+
/* Some cards seem to need this */
mmc_go_idle(mmc);
/* Asking to the card its capabilities */
- cmd.cmdidx = MMC_CMD_SEND_OP_COND;
- cmd.resp_type = MMC_RSP_R3;
- cmd.cmdarg = 0;
-
- err = mmc_send_cmd(mmc, &cmd, NULL);
-
- if (err)
- return err;
-
- udelay(1000);
-
- do {
- cmd.cmdidx = MMC_CMD_SEND_OP_COND;
- cmd.resp_type = MMC_RSP_R3;
- cmd.cmdarg = (mmc_host_is_spi(mmc) ? 0 :
- (mmc->voltages &
- (cmd.response[0] & OCR_VOLTAGE_MASK)) |
- (cmd.response[0] & OCR_ACCESS_MODE));
-
- if (mmc->host_caps & MMC_MODE_HC)
- cmd.cmdarg |= OCR_HCS;
-
- err = mmc_send_cmd(mmc, &cmd, NULL);
-
+ mmc->op_cond_pending = 1;
+ for (i = 0; i < 2; i++) {
+ err = mmc_send_op_cond_iter(mmc, &cmd, i != 0);
if (err)
return err;
- udelay(1000);
- } while (!(cmd.response[0] & OCR_BUSY) && timeout--);
+ /* exit if not busy (flag seems to be inverted) */
+ if (mmc->op_cond_response & OCR_BUSY)
+ return 0;
+ }
+ return IN_PROGRESS;
+}
- if (timeout <= 0)
- return UNUSABLE_ERR;
+int mmc_complete_op_cond(struct mmc *mmc)
+{
+ struct mmc_cmd cmd;
+ int timeout = 1000;
+ uint start;
+ int err;
+
+ mmc->op_cond_pending = 0;
+ start = get_timer(0);
+ do {
+ err = mmc_send_op_cond_iter(mmc, &cmd, 1);
+ if (err)
+ return err;
+ if (get_timer(start) > timeout)
+ return UNUSABLE_ERR;
+ udelay(100);
+ } while (!(mmc->op_cond_response & OCR_BUSY));
if (mmc_host_is_spi(mmc)) { /* read OCR for spi */
cmd.cmdidx = MMC_CMD_SPI_READ_OCR;
@@ -1274,7 +1296,7 @@
}
#endif
-int mmc_init(struct mmc *mmc)
+int mmc_start_init(struct mmc *mmc)
{
int err;
@@ -1314,17 +1336,48 @@
if (err == TIMEOUT) {
err = mmc_send_op_cond(mmc);
- if (err) {
+ if (err && err != IN_PROGRESS) {
printf("Card did not respond to voltage select!\n");
return UNUSABLE_ERR;
}
}
- err = mmc_startup(mmc);
+ if (err == IN_PROGRESS)
+ mmc->init_in_progress = 1;
+
+ return err;
+}
+
+static int mmc_complete_init(struct mmc *mmc)
+{
+ int err = 0;
+
+ if (mmc->op_cond_pending)
+ err = mmc_complete_op_cond(mmc);
+
+ if (!err)
+ err = mmc_startup(mmc);
if (err)
mmc->has_init = 0;
else
mmc->has_init = 1;
+ mmc->init_in_progress = 0;
+ return err;
+}
+
+int mmc_init(struct mmc *mmc)
+{
+ int err = IN_PROGRESS;
+ unsigned start = get_timer(0);
+
+ if (mmc->has_init)
+ return 0;
+ if (!mmc->init_in_progress)
+ err = mmc_start_init(mmc);
+
+ if (!err || err == IN_PROGRESS)
+ err = mmc_complete_init(mmc);
+ debug("%s: %d, time %lu\n", __func__, err, get_timer(start));
return err;
}
@@ -1362,6 +1415,25 @@
return cur_dev_num;
}
+void mmc_set_preinit(struct mmc *mmc, int preinit)
+{
+ mmc->preinit = preinit;
+}
+
+static void do_preinit(void)
+{
+ struct mmc *m;
+ struct list_head *entry;
+
+ list_for_each(entry, &mmc_devices) {
+ m = list_entry(entry, struct mmc, link);
+
+ if (m->preinit)
+ mmc_start_init(m);
+ }
+}
+
+
int mmc_initialize(bd_t *bis)
{
INIT_LIST_HEAD (&mmc_devices);
@@ -1372,5 +1444,140 @@
print_mmc_devices(',');
+ do_preinit();
return 0;
}
+
+#ifdef CONFIG_SUPPORT_EMMC_BOOT
+/*
+ * This function changes the size of boot partition and the size of rpmb
+ * partition present on EMMC devices.
+ *
+ * Input Parameters:
+ * struct *mmc: pointer for the mmc device strcuture
+ * bootsize: size of boot partition
+ * rpmbsize: size of rpmb partition
+ *
+ * Returns 0 on success.
+ */
+
+int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long bootsize,
+ unsigned long rpmbsize)
+{
+ int err;
+ struct mmc_cmd cmd;
+
+ /* Only use this command for raw EMMC moviNAND. Enter backdoor mode */
+ cmd.cmdidx = MMC_CMD_RES_MAN;
+ cmd.resp_type = MMC_RSP_R1b;
+ cmd.cmdarg = MMC_CMD62_ARG1;
+
+ err = mmc_send_cmd(mmc, &cmd, NULL);
+ if (err) {
+ debug("mmc_boot_partition_size_change: Error1 = %d\n", err);
+ return err;
+ }
+
+ /* Boot partition changing mode */
+ cmd.cmdidx = MMC_CMD_RES_MAN;
+ cmd.resp_type = MMC_RSP_R1b;
+ cmd.cmdarg = MMC_CMD62_ARG2;
+
+ err = mmc_send_cmd(mmc, &cmd, NULL);
+ if (err) {
+ debug("mmc_boot_partition_size_change: Error2 = %d\n", err);
+ return err;
+ }
+ /* boot partition size is multiple of 128KB */
+ bootsize = (bootsize * 1024) / 128;
+
+ /* Arg: boot partition size */
+ cmd.cmdidx = MMC_CMD_RES_MAN;
+ cmd.resp_type = MMC_RSP_R1b;
+ cmd.cmdarg = bootsize;
+
+ err = mmc_send_cmd(mmc, &cmd, NULL);
+ if (err) {
+ debug("mmc_boot_partition_size_change: Error3 = %d\n", err);
+ return err;
+ }
+ /* RPMB partition size is multiple of 128KB */
+ rpmbsize = (rpmbsize * 1024) / 128;
+ /* Arg: RPMB partition size */
+ cmd.cmdidx = MMC_CMD_RES_MAN;
+ cmd.resp_type = MMC_RSP_R1b;
+ cmd.cmdarg = rpmbsize;
+
+ err = mmc_send_cmd(mmc, &cmd, NULL);
+ if (err) {
+ debug("mmc_boot_partition_size_change: Error4 = %d\n", err);
+ return err;
+ }
+ return 0;
+}
+
+/*
+ * This function shall form and send the commands to open / close the
+ * boot partition specified by user.
+ *
+ * Input Parameters:
+ * ack: 0x0 - No boot acknowledge sent (default)
+ * 0x1 - Boot acknowledge sent during boot operation
+ * part_num: User selects boot data that will be sent to master
+ * 0x0 - Device not boot enabled (default)
+ * 0x1 - Boot partition 1 enabled for boot
+ * 0x2 - Boot partition 2 enabled for boot
+ * access: User selects partitions to access
+ * 0x0 : No access to boot partition (default)
+ * 0x1 : R/W boot partition 1
+ * 0x2 : R/W boot partition 2
+ * 0x3 : R/W Replay Protected Memory Block (RPMB)
+ *
+ * Returns 0 on success.
+ */
+int mmc_boot_part_access(struct mmc *mmc, u8 ack, u8 part_num, u8 access)
+{
+ int err;
+ struct mmc_cmd cmd;
+
+ /* Boot ack enable, boot partition enable , boot partition access */
+ cmd.cmdidx = MMC_CMD_SWITCH;
+ cmd.resp_type = MMC_RSP_R1b;
+
+ cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
+ (EXT_CSD_PART_CONF << 16) |
+ ((EXT_CSD_BOOT_ACK(ack) |
+ EXT_CSD_BOOT_PART_NUM(part_num) |
+ EXT_CSD_PARTITION_ACCESS(access)) << 8);
+
+ err = mmc_send_cmd(mmc, &cmd, NULL);
+ if (err) {
+ if (access) {
+ debug("mmc boot partition#%d open fail:Error1 = %d\n",
+ part_num, err);
+ } else {
+ debug("mmc boot partition#%d close fail:Error = %d\n",
+ part_num, err);
+ }
+ return err;
+ }
+
+ if (access) {
+ /* 4bit transfer mode at booting time. */
+ cmd.cmdidx = MMC_CMD_SWITCH;
+ cmd.resp_type = MMC_RSP_R1b;
+
+ cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
+ (EXT_CSD_BOOT_BUS_WIDTH << 16) |
+ ((1 << 0) << 8);
+
+ err = mmc_send_cmd(mmc, &cmd, NULL);
+ if (err) {
+ debug("mmc boot partition#%d open fail:Error2 = %d\n",
+ part_num, err);
+ return err;
+ }
+ }
+ return 0;
+}
+#endif
diff --git a/drivers/mmc/mv_sdhci.c b/drivers/mmc/mv_sdhci.c
index 2fe34b6..63e1f90 100644
--- a/drivers/mmc/mv_sdhci.c
+++ b/drivers/mmc/mv_sdhci.c
@@ -51,6 +51,5 @@
host->version = sdhci_readl(host, SDHCI_HOST_VERSION - 2) >> 16;
else
host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
- add_sdhci(host, max_clk, min_clk);
- return 0;
+ return add_sdhci(host, max_clk, min_clk);
}
diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c
index afdfa88..975b2c5 100644
--- a/drivers/mmc/omap_hsmmc.c
+++ b/drivers/mmc/omap_hsmmc.c
@@ -113,23 +113,21 @@
u32 value = 0;
value = readl((*ctrl)->control_pbias);
- value &= ~(SDCARD_PWRDNZ | SDCARD_BIAS_PWRDNZ);
- value |= SDCARD_BIAS_HIZ_MODE;
+ value &= ~SDCARD_PWRDNZ;
+ writel(value, (*ctrl)->control_pbias);
+ udelay(10); /* wait 10 us */
+ value &= ~SDCARD_BIAS_PWRDNZ;
writel(value, (*ctrl)->control_pbias);
palmas_mmc1_poweron_ldo();
value = readl((*ctrl)->control_pbias);
- value &= ~SDCARD_BIAS_HIZ_MODE;
- value |= SDCARD_PBIASLITE_VMODE | SDCARD_PWRDNZ | SDCARD_BIAS_PWRDNZ;
+ value |= SDCARD_BIAS_PWRDNZ;
writel(value, (*ctrl)->control_pbias);
-
- value = readl((*ctrl)->control_pbias);
- if (value & (1 << 23)) {
- value &= ~(SDCARD_PWRDNZ | SDCARD_BIAS_PWRDNZ);
- value |= SDCARD_BIAS_HIZ_MODE;
- writel(value, (*ctrl)->control_pbias);
- }
+ udelay(150); /* wait 150 us */
+ value |= SDCARD_PWRDNZ;
+ writel(value, (*ctrl)->control_pbias);
+ udelay(150); /* wait 150 us */
}
#endif
diff --git a/drivers/mmc/s5p_sdhci.c b/drivers/mmc/s5p_sdhci.c
index dc49d37..e50ff92 100644
--- a/drivers/mmc/s5p_sdhci.c
+++ b/drivers/mmc/s5p_sdhci.c
@@ -94,6 +94,5 @@
host->host_caps = MMC_MODE_HC;
- add_sdhci(host, 52000000, 400000);
- return 0;
+ return add_sdhci(host, 52000000, 400000);
}
diff --git a/drivers/mmc/spear_sdhci.c b/drivers/mmc/spear_sdhci.c
new file mode 100644
index 0000000..23f1f4b
--- /dev/null
+++ b/drivers/mmc/spear_sdhci.c
@@ -0,0 +1,44 @@
+/*
+ * (C) Copyright 2012
+ * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <sdhci.h>
+
+int spear_sdhci_init(u32 regbase, u32 max_clk, u32 min_clk, u32 quirks)
+{
+ struct sdhci_host *host = NULL;
+ host = (struct sdhci_host *)malloc(sizeof(struct sdhci_host));
+ if (!host) {
+ printf("sdhci host malloc fail!\n");
+ return 1;
+ }
+
+ host->name = "sdhci";
+ host->ioaddr = (void *)regbase;
+ host->quirks = quirks;
+
+ if (quirks & SDHCI_QUIRK_REG32_RW)
+ host->version = sdhci_readl(host, SDHCI_HOST_VERSION - 2) >> 16;
+ else
+ host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
+
+ add_sdhci(host, max_clk, min_clk);
+ return 0;
+}
diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c
index 22d8440..25f8752 100644
--- a/drivers/mtd/cfi_flash.c
+++ b/drivers/mtd/cfi_flash.c
@@ -38,6 +38,7 @@
#include <asm/processor.h>
#include <asm/io.h>
#include <asm/byteorder.h>
+#include <asm/unaligned.h>
#include <environment.h>
#include <mtd/cfi_flash.h>
#include <watchdog.h>
@@ -183,16 +184,16 @@
flash_info_t *flash_get_info(ulong base)
{
int i;
- flash_info_t *info = NULL;
+ flash_info_t *info;
for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
- info = & flash_info[i];
+ info = &flash_info[i];
if (info->size && info->start[0] <= base &&
base <= info->start[0] + info->size - 1)
- break;
+ return info;
}
- return info;
+ return NULL;
}
#endif
@@ -1640,9 +1641,10 @@
u32 tmp;
for (i = 0, j = qry->num_erase_regions - 1; i < j; i++, j--) {
- tmp = qry->erase_region_info[i];
- qry->erase_region_info[i] = qry->erase_region_info[j];
- qry->erase_region_info[j] = tmp;
+ tmp = get_unaligned(&(qry->erase_region_info[i]));
+ put_unaligned(get_unaligned(&(qry->erase_region_info[j])),
+ &(qry->erase_region_info[i]));
+ put_unaligned(tmp, &(qry->erase_region_info[j]));
}
}
@@ -2073,8 +2075,8 @@
info->start[0] = (ulong)map_physmem(base, info->portwidth, MAP_NOCACHE);
if (flash_detect_cfi (info, &qry)) {
- info->vendor = le16_to_cpu(qry.p_id);
- info->ext_addr = le16_to_cpu(qry.p_adr);
+ info->vendor = le16_to_cpu(get_unaligned(&(qry.p_id)));
+ info->ext_addr = le16_to_cpu(get_unaligned(&(qry.p_adr)));
num_erase_regions = qry.num_erase_regions;
if (info->ext_addr) {
@@ -2163,7 +2165,8 @@
break;
}
- tmp = le32_to_cpu(qry.erase_region_info[i]);
+ tmp = le32_to_cpu(get_unaligned(
+ &(qry.erase_region_info[i])));
debug("erase region %u: 0x%08lx\n", i, tmp);
erase_region_count = (tmp & 0xffff) + 1;
diff --git a/drivers/mtd/spi/Makefile b/drivers/mtd/spi/Makefile
index 90f8392..ecbb210 100644
--- a/drivers/mtd/spi/Makefile
+++ b/drivers/mtd/spi/Makefile
@@ -32,6 +32,7 @@
COBJS-$(CONFIG_SPI_FLASH) += spi_flash.o
COBJS-$(CONFIG_SPI_FLASH_ATMEL) += atmel.o
COBJS-$(CONFIG_SPI_FLASH_EON) += eon.o
+COBJS-$(CONFIG_SPI_FLASH_GIGADEVICE) += gigadevice.o
COBJS-$(CONFIG_SPI_FLASH_MACRONIX) += macronix.o
COBJS-$(CONFIG_SPI_FLASH_SPANSION) += spansion.o
COBJS-$(CONFIG_SPI_FLASH_SST) += sst.o
diff --git a/drivers/mtd/spi/gigadevice.c b/drivers/mtd/spi/gigadevice.c
new file mode 100644
index 0000000..b5e1ebe
--- /dev/null
+++ b/drivers/mtd/spi/gigadevice.c
@@ -0,0 +1,81 @@
+/*
+ * Gigadevice SPI flash driver
+ * Copyright 2013, Samsung Electronics Co., Ltd.
+ * Author: Banajit Goswami <banajit.g@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <spi_flash.h>
+
+#include "spi_flash_internal.h"
+
+struct gigadevice_spi_flash_params {
+ uint16_t id;
+ uint16_t nr_blocks;
+ const char *name;
+};
+
+static const struct gigadevice_spi_flash_params gigadevice_spi_flash_table[] = {
+ {
+ .id = 0x6016,
+ .nr_blocks = 64,
+ .name = "GD25LQ",
+ },
+ {
+ .id = 0x4017,
+ .nr_blocks = 128,
+ .name = "GD25Q64B",
+ },
+};
+
+struct spi_flash *spi_flash_probe_gigadevice(struct spi_slave *spi, u8 *idcode)
+{
+ const struct gigadevice_spi_flash_params *params;
+ struct spi_flash *flash;
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(gigadevice_spi_flash_table); i++) {
+ params = &gigadevice_spi_flash_table[i];
+ if (params->id == ((idcode[1] << 8) | idcode[2]))
+ break;
+ }
+
+ if (i == ARRAY_SIZE(gigadevice_spi_flash_table)) {
+ debug("SF: Unsupported Gigadevice ID %02x%02x\n",
+ idcode[1], idcode[2]);
+ return NULL;
+ }
+
+ flash = spi_flash_alloc_base(spi, params->name);
+ if (!flash) {
+ debug("SF: Failed to allocate memory\n");
+ return NULL;
+ }
+ /* page_size */
+ flash->page_size = 256;
+ /* sector_size = page_size * pages_per_sector */
+ flash->sector_size = flash->page_size * 16;
+ /* size = sector_size * sector_per_block * number of blocks */
+ flash->size = flash->sector_size * 16 * params->nr_blocks;
+
+ return flash;
+}
diff --git a/drivers/mtd/spi/spansion.c b/drivers/mtd/spi/spansion.c
index bc558c4..dad30b5 100644
--- a/drivers/mtd/spi/spansion.c
+++ b/drivers/mtd/spi/spansion.c
@@ -94,7 +94,7 @@
.idcode2 = 0x4d01,
.pages_per_sector = 256,
.nr_sectors = 256,
- .name = "S25FL129P_64K",
+ .name = "S25FL129P_64K/S25FL128S",
},
{
.idcode1 = 0x0219,
diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c
index 111185a..6507aa3 100644
--- a/drivers/mtd/spi/spi_flash.c
+++ b/drivers/mtd/spi/spi_flash.c
@@ -346,6 +346,9 @@
#ifdef CONFIG_SPI_FLASH_EON
{ 0, 0x1c, spi_flash_probe_eon, },
#endif
+#ifdef CONFIG_SPI_FLASH_GIGADEVICE
+ { 0, 0xc8, spi_flash_probe_gigadevice, },
+#endif
#ifdef CONFIG_SPI_FLASH_MACRONIX
{ 0, 0xc2, spi_flash_probe_macronix, },
#endif
diff --git a/drivers/mtd/spi/spi_flash_internal.h b/drivers/mtd/spi/spi_flash_internal.h
index 141cfa8..e0afbc3 100644
--- a/drivers/mtd/spi/spi_flash_internal.h
+++ b/drivers/mtd/spi/spi_flash_internal.h
@@ -106,3 +106,4 @@
struct spi_flash *spi_flash_probe_stmicro(struct spi_slave *spi, u8 *idcode);
struct spi_flash *spi_flash_probe_winbond(struct spi_slave *spi, u8 *idcode);
struct spi_flash *spi_fram_probe_ramtron(struct spi_slave *spi, u8 *idcode);
+struct spi_flash *spi_flash_probe_gigadevice(struct spi_slave *spi, u8 *idcode);
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index c63398e..0ffd59d 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -122,8 +122,6 @@
{
int i;
int result = 0;
- unsigned int *buf;
- buf = (unsigned int *)packet;
if (length <= 0) {
printf("Ethernet: bad packet size: %d\n", length);
diff --git a/drivers/net/fm/Makefile b/drivers/net/fm/Makefile
index f191c79..9aaa828 100644
--- a/drivers/net/fm/Makefile
+++ b/drivers/net/fm/Makefile
@@ -46,6 +46,7 @@
COBJS-$(CONFIG_PPC_P5020) += p5020.o
COBJS-$(CONFIG_PPC_P5040) += p5040.o
COBJS-$(CONFIG_PPC_T4240) += t4240.o
+COBJS-$(CONFIG_PPC_T4160) += t4240.o
COBJS-$(CONFIG_PPC_B4420) += b4860.o
COBJS-$(CONFIG_PPC_B4860) += b4860.o
endif
diff --git a/drivers/net/fm/b4860.c b/drivers/net/fm/b4860.c
index 8cde7af..3b5defe 100644
--- a/drivers/net/fm/b4860.c
+++ b/drivers/net/fm/b4860.c
@@ -55,8 +55,10 @@
if (is_device_disabled(port))
return PHY_INTERFACE_MODE_NONE;
- if ((port == FM1_10GEC1 || port == FM1_10GEC2)
- && (is_serdes_configured(XAUI_FM1)))
+ /*B4860 has two 10Gig Mac*/
+ if ((port == FM1_10GEC1 || port == FM1_10GEC2) &&
+ ((is_serdes_configured(XAUI_FM1_MAC9)) ||
+ (is_serdes_configured(XAUI_FM1_MAC10))))
return PHY_INTERFACE_MODE_XGMII;
/* Fix me need to handle RGMII here first */
diff --git a/drivers/net/fm/eth.c b/drivers/net/fm/eth.c
index 54b142f..9b139ee 100644
--- a/drivers/net/fm/eth.c
+++ b/drivers/net/fm/eth.c
@@ -568,6 +568,8 @@
num = fm_eth->num;
#ifdef CONFIG_SYS_FMAN_V3
+ if (fm_eth->type == FM_ETH_10G_E)
+ num += 8;
base = ®->memac[num].fm_memac;
phyregs = ®->memac[num].fm_memac_mdio;
#else
diff --git a/drivers/net/fm/fm.h b/drivers/net/fm/fm.h
index 228df33..ba581e9 100644
--- a/drivers/net/fm/fm.h
+++ b/drivers/net/fm/fm.h
@@ -152,4 +152,6 @@
#define MAX_RXBUF_LOG2 11
#define MAX_RXBUF_LEN (1 << MAX_RXBUF_LOG2)
+#define PORT_IS_ENABLED(port) fm_info[fm_port_to_index(port)].enabled
+
#endif /* __FM_H__ */
diff --git a/drivers/net/fm/init.c b/drivers/net/fm/init.c
index ae389b8..5908c32 100644
--- a/drivers/net/fm/init.c
+++ b/drivers/net/fm/init.c
@@ -74,9 +74,15 @@
#if (CONFIG_SYS_NUM_FM1_10GEC >= 1)
FM_TGEC_INFO_INITIALIZER(1, 1),
#endif
+#if (CONFIG_SYS_NUM_FM1_10GEC >= 2)
+ FM_TGEC_INFO_INITIALIZER(1, 2),
+#endif
#if (CONFIG_SYS_NUM_FM2_10GEC >= 1)
FM_TGEC_INFO_INITIALIZER(2, 1),
#endif
+#if (CONFIG_SYS_NUM_FM2_10GEC >= 2)
+ FM_TGEC_INFO_INITIALIZER(2, 2),
+#endif
};
int fm_standard_init(bd_t *bis)
@@ -232,6 +238,26 @@
return ;
}
+#ifdef CONFIG_SYS_FMAN_V3
+ /*
+ * Physically FM1_DTSEC9 and FM1_10GEC1 use the same dual-role MAC, when
+ * FM1_10GEC1 is enabled and FM1_DTSEC9 is disabled, ensure that the
+ * dual-role MAC is not disabled, ditto for other dual-role MACs.
+ */
+ if (((info->port == FM1_DTSEC9) && (PORT_IS_ENABLED(FM1_10GEC1))) ||
+ ((info->port == FM1_DTSEC10) && (PORT_IS_ENABLED(FM1_10GEC2))) ||
+ ((info->port == FM1_10GEC1) && (PORT_IS_ENABLED(FM1_DTSEC9))) ||
+ ((info->port == FM1_10GEC2) && (PORT_IS_ENABLED(FM1_DTSEC10)))
+#if (CONFIG_SYS_NUM_FMAN == 2)
+ ||
+ ((info->port == FM2_DTSEC9) && (PORT_IS_ENABLED(FM2_10GEC1))) ||
+ ((info->port == FM2_DTSEC10) && (PORT_IS_ENABLED(FM2_10GEC2))) ||
+ ((info->port == FM2_10GEC1) && (PORT_IS_ENABLED(FM2_DTSEC9))) ||
+ ((info->port == FM2_10GEC2) && (PORT_IS_ENABLED(FM2_DTSEC10)))
+#endif
+ )
+ return;
+#endif
/* board code might have caused offset to change */
off = fdt_node_offset_by_compat_reg(blob, prop, paddr);
@@ -249,10 +275,15 @@
{
int i;
+#ifdef CONFIG_SYS_FMAN_V3
+ for (i = 0; i < ARRAY_SIZE(fm_info); i++)
+ ft_fixup_port(blob, &fm_info[i], "fsl,fman-memac");
+#else
for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
if (fm_info[i].type == FM_ETH_1G_E)
ft_fixup_port(blob, &fm_info[i], "fsl,fman-1g-mac");
else
ft_fixup_port(blob, &fm_info[i], "fsl,fman-10g-mac");
}
+#endif
}
diff --git a/drivers/net/fm/t4240.c b/drivers/net/fm/t4240.c
index 48c530c..275395f 100644
--- a/drivers/net/fm/t4240.c
+++ b/drivers/net/fm/t4240.c
@@ -70,12 +70,18 @@
if (is_device_disabled(port))
return PHY_INTERFACE_MODE_NONE;
- if ((port == FM1_10GEC1 || port == FM1_10GEC2)
- && (is_serdes_configured(XAUI_FM1)))
+ if ((port == FM1_10GEC1 || port == FM1_10GEC2) &&
+ ((is_serdes_configured(XAUI_FM1_MAC9)) ||
+ (is_serdes_configured(XAUI_FM1_MAC10)) ||
+ (is_serdes_configured(XFI_FM1_MAC9)) ||
+ (is_serdes_configured(XFI_FM1_MAC10))))
return PHY_INTERFACE_MODE_XGMII;
- if ((port == FM2_10GEC1 || port == FM2_10GEC2)
- && (is_serdes_configured(XAUI_FM2)))
+ if ((port == FM2_10GEC1 || port == FM2_10GEC2) &&
+ ((is_serdes_configured(XAUI_FM2_MAC9)) ||
+ (is_serdes_configured(XAUI_FM2_MAC10)) ||
+ (is_serdes_configured(XFI_FM2_MAC9)) ||
+ (is_serdes_configured(XFI_FM2_MAC10))))
return PHY_INTERFACE_MODE_XGMII;
#define FSL_CORENET_RCWSR13_EC1 0x60000000 /* bits 417..418 */
diff --git a/drivers/net/phy/teranetics.c b/drivers/net/phy/teranetics.c
index 78447b7..84ce736 100644
--- a/drivers/net/phy/teranetics.c
+++ b/drivers/net/phy/teranetics.c
@@ -34,9 +34,21 @@
unsigned short restart_an = (MDIO_AN_CTRL1_RESTART |
MDIO_AN_CTRL1_ENABLE |
MDIO_AN_CTRL1_XNP);
+ u8 phy_hwversion;
- phy_write(phydev, 30, 93, 2);
- phy_write(phydev, MDIO_MMD_AN, MDIO_CTRL1, restart_an);
+ /*
+ * bit 15:12 of register 30.32 indicates PHY hardware
+ * version. It can be used to distinguish TN80xx from
+ * TN2020. TN2020 needs write 0x2 to 30.93, but TN80xx
+ * needs 0x1.
+ */
+ phy_hwversion = (phy_read(phydev, 30, 32) >> 12) & 0xf;
+ if (phy_hwversion <= 3) {
+ phy_write(phydev, 30, 93, 2);
+ phy_write(phydev, MDIO_MMD_AN, MDIO_CTRL1, restart_an);
+ } else {
+ phy_write(phydev, 30, 93, 1);
+ }
}
return 0;
diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c
index 6c5cb99..c283d82 100644
--- a/drivers/net/phy/vitesse.c
+++ b/drivers/net/phy/vitesse.c
@@ -48,6 +48,19 @@
#define MIIM_VSC8601_SKEW_CTRL 0x1c
#define PHY_EXT_PAGE_ACCESS 0x1f
+#define PHY_EXT_PAGE_ACCESS_GENERAL 0x10
+#define PHY_EXT_PAGE_ACCESS_EXTENDED3 0x3
+
+/* Vitesse VSC8574 control register */
+#define MIIM_VSC8574_MAC_SERDES_CON 0x10
+#define MIIM_VSC8574_MAC_SERDES_ANEG 0x80
+#define MIIM_VSC8574_GENERAL18 0x12
+#define MIIM_VSC8574_GENERAL19 0x13
+
+/* Vitesse VSC8574 gerenal purpose register 18 */
+#define MIIM_VSC8574_18G_SGMII 0x80f0
+#define MIIM_VSC8574_18G_QSGMII 0x80e0
+#define MIIM_VSC8574_18G_CMDSTAT 0x8000
/* CIS8201 */
static int vitesse_config(struct phy_device *phydev)
@@ -145,6 +158,49 @@
return 0;
}
+static int vsc8574_config(struct phy_device *phydev)
+{
+ u32 val;
+ /* configure regiser 19G for MAC */
+ phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS,
+ PHY_EXT_PAGE_ACCESS_GENERAL);
+
+ val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL19);
+ if (phydev->interface == PHY_INTERFACE_MODE_QSGMII) {
+ /* set bit 15:14 to '01' for QSGMII mode */
+ val = (val & 0x3fff) | (1 << 14);
+ phy_write(phydev, MDIO_DEVAD_NONE,
+ MIIM_VSC8574_GENERAL19, val);
+ /* Enable 4 ports MAC QSGMII */
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL18,
+ MIIM_VSC8574_18G_QSGMII);
+ } else {
+ /* set bit 15:14 to '00' for SGMII mode */
+ val = val & 0x3fff;
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL19, val);
+ /* Enable 4 ports MAC SGMII */
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL18,
+ MIIM_VSC8574_18G_SGMII);
+ }
+ val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL18);
+ /* When bit 15 is cleared the command has completed */
+ while (val & MIIM_VSC8574_18G_CMDSTAT)
+ val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL18);
+
+ /* Enable Serdes Auto-negotiation */
+ phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS,
+ PHY_EXT_PAGE_ACCESS_EXTENDED3);
+ val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_MAC_SERDES_CON);
+ val = val | MIIM_VSC8574_MAC_SERDES_ANEG;
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_MAC_SERDES_CON, val);
+
+ phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 0);
+
+ genphy_config_aneg(phydev);
+
+ return 0;
+}
+
static struct phy_driver VSC8211_driver = {
.name = "Vitesse VSC8211",
.uid = 0xfc4b0,
@@ -185,6 +241,16 @@
.shutdown = &genphy_shutdown,
};
+static struct phy_driver VSC8574_driver = {
+ .name = "Vitesse VSC8574",
+ .uid = 0x704a0,
+ .mask = 0xffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &vsc8574_config,
+ .startup = &vitesse_startup,
+ .shutdown = &genphy_shutdown,
+};
+
static struct phy_driver VSC8601_driver = {
.name = "Vitesse VSC8601",
.uid = 0x70420,
@@ -244,6 +310,7 @@
phy_register(&VSC8244_driver);
phy_register(&VSC8211_driver);
phy_register(&VSC8221_driver);
+ phy_register(&VSC8574_driver);
phy_register(&VSC8662_driver);
phy_register(&cis8201_driver);
phy_register(&cis8204_driver);
diff --git a/drivers/net/smc911x.h b/drivers/net/smc911x.h
index a290073..f63a069 100644
--- a/drivers/net/smc911x.h
+++ b/drivers/net/smc911x.h
@@ -484,7 +484,7 @@
while (timeout-- &&
!(smc911x_reg_read(dev, PMT_CTRL) & PMT_CTRL_READY))
udelay(10);
- if (!timeout) {
+ if (timeout < 0) {
printf(DRIVERNAME
": timeout waiting for PM restore\n");
return;
@@ -500,7 +500,7 @@
while (timeout-- && smc911x_reg_read(dev, E2P_CMD) & E2P_CMD_EPC_BUSY)
udelay(10);
- if (!timeout) {
+ if (timeout < 0) {
printf(DRIVERNAME ": reset timeout\n");
return;
}
diff --git a/drivers/power/battery/bat_trats.c b/drivers/power/battery/bat_trats.c
index ca0d214..97a9661 100644
--- a/drivers/power/battery/bat_trats.c
+++ b/drivers/power/battery/bat_trats.c
@@ -41,18 +41,23 @@
for (k = 0; bat->chrg->chrg_bat_present(p_bat->chrg) &&
bat->chrg->chrg_type(p_bat->muic) &&
battery->state_of_chrg < 100; k++) {
- udelay(10000000);
- puts(".");
+ udelay(2000000);
+ if (!(k % 5))
+ puts(".");
bat->fg->fg_battery_update(p_bat->fg, bat);
- if (k == 100) {
+ if (k == 200) {
debug(" %d [V]", battery->voltage_uV);
puts("\n");
k = 0;
}
+ if (ctrlc()) {
+ printf("\nCharging disabled on request.\n");
+ goto exit;
+ }
}
-
+ exit:
bat->chrg->chrg_state(p_bat->chrg, CHARGER_DISABLE, 0);
return 0;
diff --git a/drivers/power/exynos-tmu.c b/drivers/power/exynos-tmu.c
index d4b3e65..9a093a5 100644
--- a/drivers/power/exynos-tmu.c
+++ b/drivers/power/exynos-tmu.c
@@ -50,15 +50,15 @@
/* Tmeperature threshold values for various thermal events */
struct temperature_params {
/* minimum value in temperature code range */
- unsigned int min_val;
+ unsigned min_val;
/* maximum value in temperature code range */
- unsigned int max_val;
+ unsigned max_val;
/* temperature threshold to start warning */
- unsigned int start_warning;
+ unsigned start_warning;
/* temperature threshold CPU tripping */
- unsigned int start_tripping;
+ unsigned start_tripping;
/* temperature threshold for HW tripping */
- unsigned int hardware_tripping;
+ unsigned hardware_tripping;
};
/* Pre-defined values and thresholds for calibration of current temperature */
@@ -66,25 +66,27 @@
/* pre-defined temperature thresholds */
struct temperature_params ts;
/* pre-defined efuse range minimum value */
- unsigned int efuse_min_value;
+ unsigned efuse_min_value;
/* pre-defined efuse value for temperature calibration */
- unsigned int efuse_value;
+ unsigned efuse_value;
/* pre-defined efuse range maximum value */
- unsigned int efuse_max_value;
+ unsigned efuse_max_value;
/* current temperature sensing slope */
- unsigned int slope;
+ unsigned slope;
};
/* TMU device specific details and status */
struct tmu_info {
/* base Address for the TMU */
- unsigned tmu_base;
+ struct exynos5_tmu_reg *tmu_base;
+ /* mux Address for the TMU */
+ int tmu_mux;
/* pre-defined values for calibration and thresholds */
struct tmu_data data;
/* value required for triminfo_25 calibration */
- unsigned int te1;
+ unsigned te1;
/* value required for triminfo_85 calibration */
- unsigned int te2;
+ unsigned te2;
/* Value for measured data calibration */
int dc_value;
/* enum value indicating status of the TMU */
@@ -103,17 +105,24 @@
*/
static int get_cur_temp(struct tmu_info *info)
{
- int cur_temp;
- struct exynos5_tmu_reg *reg = (struct exynos5_tmu_reg *)info->tmu_base;
+ struct exynos5_tmu_reg *reg = info->tmu_base;
+ ulong start;
+ int cur_temp = 0;
/*
* Temperature code range between min 25 and max 125.
* May run more than once for first call as initial sensing
* has not yet happened.
*/
- do {
- cur_temp = readl(®->current_temp) & 0xff;
- } while (cur_temp == 0 && info->tmu_state == TMU_STATUS_NORMAL);
+ if (info->tmu_state == TMU_STATUS_NORMAL) {
+ start = get_timer(0);
+ do {
+ cur_temp = readl(®->current_temp) & 0xff;
+ } while ((cur_temp == 0) || (get_timer(start) > 100));
+ }
+
+ if (cur_temp == 0)
+ return cur_temp;
/* Calibrate current temperature */
cur_temp = cur_temp - info->te1 + info->dc_value;
@@ -137,23 +146,29 @@
/* Read current temperature of the SOC */
cur_temp = get_cur_temp(&gbl_info);
+
+ if (!cur_temp)
+ goto out;
+
*temp = cur_temp;
/* Temperature code lies between min 25 and max 125 */
- if (cur_temp >= data->ts.start_tripping &&
- cur_temp <= data->ts.max_val) {
+ if ((cur_temp >= data->ts.start_tripping) &&
+ (cur_temp <= data->ts.max_val))
return TMU_STATUS_TRIPPED;
- } else if (cur_temp >= data->ts.start_warning) {
+
+ if (cur_temp >= data->ts.start_warning)
return TMU_STATUS_WARNING;
- } else if (cur_temp < data->ts.start_warning &&
- cur_temp >= data->ts.min_val) {
+
+ if ((cur_temp < data->ts.start_warning) &&
+ (cur_temp >= data->ts.min_val))
return TMU_STATUS_NORMAL;
- } else {
- /* Temperature code does not lie between min 25 and max 125 */
- gbl_info.tmu_state = TMU_STATUS_INIT;
- debug("EXYNOS_TMU: Thermal reading failed\n");
- return TMU_STATUS_INIT;
- }
+
+ out:
+ /* Temperature code does not lie between min 25 and max 125 */
+ gbl_info.tmu_state = TMU_STATUS_INIT;
+ debug("EXYNOS_TMU: Thermal reading failed\n");
+ return TMU_STATUS_INIT;
}
/*
@@ -166,6 +181,7 @@
static int get_tmu_fdt_values(struct tmu_info *info, const void *blob)
{
#ifdef CONFIG_OF_CONTROL
+ fdt_addr_t addr;
int node;
int error = 0;
@@ -183,46 +199,58 @@
* miscalculation of register values in tmu_setup_parameters
* may result in misleading current temperature.
*/
- info->tmu_base = fdtdec_get_addr(blob, node, "reg");
- if (info->tmu_base == FDT_ADDR_T_NONE) {
+ addr = fdtdec_get_addr(blob, node, "reg");
+ if (addr == FDT_ADDR_T_NONE) {
debug("%s: Missing tmu-base\n", __func__);
return -1;
}
+ info->tmu_base = (struct exynos5_tmu_reg *)addr;
+
+ /* Optional field. */
+ info->tmu_mux = fdtdec_get_int(blob,
+ node, "samsung,mux", -1);
+ /* Take default value as per the user manual b(110) */
+ if (info->tmu_mux == -1)
+ info->tmu_mux = 0x6;
+
info->data.ts.min_val = fdtdec_get_int(blob,
node, "samsung,min-temp", -1);
- error |= info->data.ts.min_val;
+ error |= (info->data.ts.min_val == -1);
info->data.ts.max_val = fdtdec_get_int(blob,
node, "samsung,max-temp", -1);
- error |= info->data.ts.max_val;
+ error |= (info->data.ts.max_val == -1);
info->data.ts.start_warning = fdtdec_get_int(blob,
node, "samsung,start-warning", -1);
- error |= info->data.ts.start_warning;
+ error |= (info->data.ts.start_warning == -1);
info->data.ts.start_tripping = fdtdec_get_int(blob,
node, "samsung,start-tripping", -1);
- error |= info->data.ts.start_tripping;
+ error |= (info->data.ts.start_tripping == -1);
info->data.ts.hardware_tripping = fdtdec_get_int(blob,
node, "samsung,hw-tripping", -1);
- error |= info->data.ts.hardware_tripping;
+ error |= (info->data.ts.hardware_tripping == -1);
info->data.efuse_min_value = fdtdec_get_int(blob,
node, "samsung,efuse-min-value", -1);
- error |= info->data.efuse_min_value;
+ error |= (info->data.efuse_min_value == -1);
info->data.efuse_value = fdtdec_get_int(blob,
node, "samsung,efuse-value", -1);
- error |= info->data.efuse_value;
+ error |= (info->data.efuse_value == -1);
info->data.efuse_max_value = fdtdec_get_int(blob,
node, "samsung,efuse-max-value", -1);
- error |= info->data.efuse_max_value;
+ error |= (info->data.efuse_max_value == -1);
info->data.slope = fdtdec_get_int(blob,
node, "samsung,slope", -1);
- error |= info->data.slope;
+ error |= (info->data.slope == -1);
info->dc_value = fdtdec_get_int(blob,
node, "samsung,dc-value", -1);
- error |= info->dc_value;
+ error |= (info->dc_value == -1);
- if (error == -1) {
+ if (error) {
debug("fail to get tmu node properties\n");
return -1;
}
+#else
+ /* Non DT support may never be added. Just in case */
+ return -1;
#endif
return 0;
@@ -236,12 +264,12 @@
*/
static void tmu_setup_parameters(struct tmu_info *info)
{
- unsigned int te_code, con;
- unsigned int warning_code, trip_code, hwtrip_code;
- unsigned int cooling_temp;
- unsigned int rising_value;
+ unsigned te_code, con;
+ unsigned warning_code, trip_code, hwtrip_code;
+ unsigned cooling_temp;
+ unsigned rising_value;
struct tmu_data *data = &info->data;
- struct exynos5_tmu_reg *reg = (struct exynos5_tmu_reg *)info->tmu_base;
+ struct exynos5_tmu_reg *reg = info->tmu_base;
/* Must reload for reading efuse value from triminfo register */
writel(TRIMINFO_RELOAD, ®->triminfo_control);
@@ -288,7 +316,7 @@
/* TMU core enable */
con = readl(®->tmu_control);
- con |= THERM_TRIP_EN | CORE_EN;
+ con |= THERM_TRIP_EN | CORE_EN | (info->tmu_mux << 20);
writel(con, ®->tmu_control);
@@ -314,6 +342,5 @@
tmu_setup_parameters(&gbl_info);
gbl_info.tmu_state = TMU_STATUS_NORMAL;
ret:
-
return gbl_info.tmu_state;
}
diff --git a/drivers/power/palmas.c b/drivers/power/palmas.c
index 09c832d..2d275a7 100644
--- a/drivers/power/palmas.c
+++ b/drivers/power/palmas.c
@@ -25,28 +25,137 @@
void palmas_init_settings(void)
{
- return;
+#ifdef CONFIG_PALMAS_SMPS7_FPWM
+ int err;
+ /*
+ * Set SMPS7 (1.8 V I/O supply on platforms with TWL6035/37) to
+ * forced PWM mode. This reduces noise (but affects efficiency).
+ */
+ u8 val = SMPS_MODE_SLP_FPWM | SMPS_MODE_ACT_FPWM;
+ err = palmas_i2c_write_u8(TWL603X_CHIP_P1, SMPS7_CTRL, val);
+ if (err)
+ printf("palmas: could not force PWM for SMPS7: err = %d\n",
+ err);
+#endif
}
int palmas_mmc1_poweron_ldo(void)
{
u8 val = 0;
- /* set LDO9 TWL6035 to 3V */
- val = 0x2b; /* (3 -.9)*28 +1 */
-
- if (palmas_i2c_write_u8(0x48, LDO9_VOLTAGE, val)) {
- printf("twl6035: could not set LDO9 voltage.\n");
+#if defined(CONFIG_DRA7XX)
+ /*
+ * Currently valid for the dra7xx_evm board:
+ * Set TPS659038 LDO1 to 3.0 V
+ */
+ val = LDO_VOLT_3V0;
+ if (palmas_i2c_write_u8(TPS65903X_CHIP_P1, LDO1_VOLTAGE, val)) {
+ printf("tps65903x: could not set LDO1 voltage.\n");
return 1;
}
-
- /* TURN ON LDO9 */
- val = LDO_ON | LDO_MODE_SLEEP | LDO_MODE_ACTIVE;
-
- if (palmas_i2c_write_u8(0x48, LDO9_CTRL, val)) {
- printf("twl6035: could not turn on LDO9.\n");
+ /* TURN ON LDO1 */
+ val = RSC_MODE_SLEEP | RSC_MODE_ACTIVE;
+ if (palmas_i2c_write_u8(TPS65903X_CHIP_P1, LDO1_CTRL, val)) {
+ printf("tps65903x: could not turn on LDO1.\n");
return 1;
}
-
return 0;
+#else
+ /*
+ * We assume that this is a OMAP543X + TWL603X board:
+ * Set TWL6035/37 LDO9 to 3.0 V
+ */
+ val = LDO_VOLT_3V0;
+ return twl603x_mmc1_set_ldo9(val);
+#endif
+}
+
+/*
+ * On some OMAP5 + TWL603X hardware the SD card socket and LDO9_IN are
+ * powered by an external 3.3 V regulator, while the output of LDO9
+ * supplies VDDS_SDCARD for the OMAP5 interface only. This implies that
+ * LDO9 could be set to 'bypass' mode when required (e.g. for 3.3 V cards).
+ */
+int twl603x_mmc1_set_ldo9(u8 vsel)
+{
+ u8 cval = 0, vval = 0; /* Off by default */
+ int err;
+
+ if (vsel) {
+ /* Turn on */
+ if (vsel > LDO_VOLT_3V3) {
+ /* Put LDO9 in bypass */
+ cval = LDO9_BYP_EN | RSC_MODE_SLEEP | RSC_MODE_ACTIVE;
+ vval = LDO_VOLT_3V3;
+ } else {
+ cval = RSC_MODE_SLEEP | RSC_MODE_ACTIVE;
+ vval = vsel & 0x3f;
+ }
+ }
+ err = palmas_i2c_write_u8(TWL603X_CHIP_P1, LDO9_VOLTAGE, vval);
+ if (err) {
+ printf("twl603x: could not set LDO9 %s: err = %d\n",
+ vsel > LDO_VOLT_3V3 ? "bypass" : "voltage", err);
+ return err;
+ }
+ err = palmas_i2c_write_u8(TWL603X_CHIP_P1, LDO9_CTRL, cval);
+ if (err)
+ printf("twl603x: could not turn %s LDO9: err = %d\n",
+ cval ? "on" : "off", err);
+ return err;
+}
+
+#ifdef CONFIG_PALMAS_AUDPWR
+/*
+ * Turn audio codec power and 32 kHz clock on/off. Use for
+ * testing OMAP543X + TWL603X + TWL604X boards only.
+ */
+int twl603x_audio_power(u8 on)
+{
+ u8 cval = 0, vval = 0, c32k = 0;
+ int err;
+
+ if (on) {
+ vval = SMPS_VOLT_2V1;
+ cval = SMPS_MODE_SLP_AUTO | SMPS_MODE_ACT_AUTO;
+ c32k = RSC_MODE_SLEEP | RSC_MODE_ACTIVE;
+ }
+ /* Set SMPS9 to 2.1 V (for TWL604x), or to 0 (off) */
+ err = palmas_i2c_write_u8(TWL603X_CHIP_P1, SMPS9_VOLTAGE, vval);
+ if (err) {
+ printf("twl603x: could not set SMPS9 voltage: err = %d\n",
+ err);
+ return err;
+ }
+ /* Turn on or off SMPS9 */
+ err = palmas_i2c_write_u8(TWL603X_CHIP_P1, SMPS9_CTRL, cval);
+ if (err) {
+ printf("twl603x: could not turn SMPS9 %s: err = %d\n",
+ cval ? "on" : "off", err);
+ return err;
+ }
+ /* Output 32 kHz clock on or off */
+ err = palmas_i2c_write_u8(TWL603X_CHIP_P1, CLK32KGAUDIO_CTRL, c32k);
+ if (err)
+ printf("twl603x: could not turn CLK32KGAUDIO %s: err = %d\n",
+ c32k ? "on" : "off", err);
+ return err;
+}
+#endif
+
+/*
+ * Enable/disable back-up battery (or super cap) charging on TWL6035/37.
+ * Please use defined BB_xxx values.
+ */
+int twl603x_enable_bb_charge(u8 bb_fields)
+{
+ u8 val = bb_fields & 0x0f;
+ int err;
+
+ val |= (VRTC_EN_SLP | VRTC_EN_OFF | VRTC_PWEN);
+ err = palmas_i2c_write_u8(TWL603X_CHIP_P1, BB_VRTC_CTRL, val);
+ if (err)
+ printf("twl603x: could not set BB_VRTC_CTRL to 0x%02x: err = %d\n",
+ val, err);
+ return err;
}
diff --git a/drivers/power/power_core.c b/drivers/power/power_core.c
index 90df2c5..f16b9dc 100644
--- a/drivers/power/power_core.c
+++ b/drivers/power/power_core.c
@@ -205,7 +205,8 @@
if (strcmp(argv[3], "charge") == 0) {
if (p->pbat) {
- printf("PRINT BAT charge %s\n", p->name);
+ printf("BAT: %s charging (ctrl+c to break)\n",
+ p->name);
if (p->low_power_mode)
p->low_power_mode();
if (p->pbat->battery_charge)
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index bb6559b..0f954a5 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -52,6 +52,7 @@
COBJS-$(CONFIG_SANDBOX_SERIAL) += sandbox.o
COBJS-$(CONFIG_SCIF_CONSOLE) += serial_sh.o
COBJS-$(CONFIG_ZYNQ_SERIAL) += serial_zynq.o
+COBJS-$(CONFIG_BFIN_SERIAL) += serial_bfin.o
COBJS-$(CONFIG_FSL_LPUART) += serial_lpuart.o
ifndef CONFIG_SPL_BUILD
diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index 7f013ab..d77c25f 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -74,13 +74,8 @@
defined(CONFIG_AM33XX) || defined(CONFIG_SOC_DA8XX) || \
defined(CONFIG_TI814X)
-#if defined(CONFIG_APTIX)
- /* /13 mode so Aptix 6MHz can hit 115200 */
- serial_out(3, &com_port->mdr1);
-#else
/* /16 is proper to hit 115200 with 48MHz */
serial_out(0, &com_port->mdr1);
-#endif
#endif /* CONFIG_OMAP */
}
diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c
index 9f04643..daa8003 100644
--- a/drivers/serial/serial.c
+++ b/drivers/serial/serial.c
@@ -143,7 +143,6 @@
serial_initfunc(asc_serial_initialize);
serial_initfunc(jz_serial_initialize);
serial_initfunc(mpc5xx_serial_initialize);
-serial_initfunc(mpc8220_serial_initialize);
serial_initfunc(mpc8260_scc_serial_initialize);
serial_initfunc(mpc8260_smc_serial_initialize);
serial_initfunc(mpc85xx_serial_initialize);
@@ -236,7 +235,6 @@
asc_serial_initialize();
jz_serial_initialize();
mpc5xx_serial_initialize();
- mpc8220_serial_initialize();
mpc8260_scc_serial_initialize();
mpc8260_smc_serial_initialize();
mpc85xx_serial_initialize();
diff --git a/arch/blackfin/cpu/serial.c b/drivers/serial/serial_bfin.c
similarity index 78%
rename from arch/blackfin/cpu/serial.c
rename to drivers/serial/serial_bfin.c
index 9847e9f..0443b84 100644
--- a/arch/blackfin/cpu/serial.c
+++ b/drivers/serial/serial_bfin.c
@@ -43,13 +43,12 @@
#include <serial.h>
#include <linux/compiler.h>
#include <asm/blackfin.h>
+#include <asm/serial.h>
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_UART_CONSOLE
-#include "serial.h"
-
#ifdef CONFIG_DEBUG_SERIAL
static uart_lsr_t cached_lsr[256];
static uart_lsr_t cached_rbr[256];
@@ -195,7 +194,18 @@
#endif
-#ifdef CONFIG_SYS_BFIN_UART
+static inline void __serial_set_baud(uint32_t uart_base, uint32_t baud)
+{
+#ifdef CONFIG_DEBUG_EARLY_SERIAL
+ serial_early_set_baud(uart_base, baud);
+#else
+ uint16_t divisor = (get_uart_clk() + (baud * 8)) / (baud * 16)
+ - ANOMALY_05000230;
+
+ /* Program the divisor to get the baud rate we want */
+ serial_set_divisor(uart_base, divisor);
+#endif
+}
static void uart_puts(uint32_t uart_base, const char *s)
{
@@ -209,7 +219,7 @@
const unsigned short pins[] = { _P_UART(n, RX), _P_UART(n, TX), 0, }; \
peripheral_request_list(pins, "bfin-uart"); \
uart_init(MMR_UART(n)); \
- serial_early_set_baud(MMR_UART(n), gd->baudrate); \
+ __serial_set_baud(MMR_UART(n), gd->baudrate); \
uart_lsr_clear(MMR_UART(n)); \
return 0; \
} \
@@ -221,7 +231,7 @@
\
static void uart##n##_setbrg(void) \
{ \
- serial_early_set_baud(MMR_UART(n), gd->baudrate); \
+ __serial_set_baud(MMR_UART(n), gd->baudrate); \
} \
\
static int uart##n##_getc(void) \
@@ -305,65 +315,97 @@
#endif
}
-#else
+#ifdef CONFIG_DEBUG_EARLY_SERIAL
+inline void uart_early_putc(uint32_t uart_base, const char c)
+{
+ /* send a \r for compatibility */
+ if (c == '\n')
+ uart_early_putc(uart_base, '\r');
+
+ /* wait for the hardware fifo to clear up */
+ while (!(_lsr_read(pUART) & THRE))
+ continue;
+
+ /* queue the character for transmission */
+ bfin_write(&pUART->thr, c);
+ SSYNC();
+}
+
+void uart_early_puts(const char *s)
+{
+ while (*s)
+ uart_early_putc(UART_BASE, *s++);
+}
/* Symbol for our assembly to call. */
-void serial_set_baud(uint32_t baud)
+void _serial_early_set_baud(uint32_t baud)
{
serial_early_set_baud(UART_BASE, baud);
}
-/* Symbol for common u-boot code to call.
- * Setup the baudrate (brg: baudrate generator).
- */
-void serial_setbrg(void)
-{
- serial_set_baud(gd->baudrate);
-}
-
/* Symbol for our assembly to call. */
-void serial_initialize(void)
+void _serial_early_init(void)
{
serial_early_init(UART_BASE);
}
+#endif
-/* Symbol for common u-boot code to call. */
-int serial_init(void)
+#elif defined(CONFIG_UART_MEM)
+
+char serial_logbuf[CONFIG_UART_MEM];
+char *serial_logbuf_head = serial_logbuf;
+
+int serial_mem_init(void)
{
- serial_initialize();
- serial_setbrg();
- uart_lsr_clear(UART_BASE);
+ serial_logbuf_head = serial_logbuf;
return 0;
}
-int serial_tstc(void)
+void serial_mem_setbrg(void)
{
- return uart_tstc(UART_BASE);
}
-int serial_getc(void)
+int serial_mem_tstc(void)
{
- return uart_getc(UART_BASE);
+ return 0;
}
-void serial_putc(const char c)
+int serial_mem_getc(void)
{
- uart_putc(UART_BASE, c);
+ return 0;
}
-void serial_puts(const char *s)
+void serial_mem_putc(const char c)
+{
+ *serial_logbuf_head = c;
+ if (++serial_logbuf_head == serial_logbuf + CONFIG_UART_MEM)
+ serial_logbuf_head = serial_logbuf;
+}
+
+void serial_mem_puts(const char *s)
{
while (*s)
serial_putc(*s++);
}
-LOOP(
-void serial_loop(int state)
+struct serial_device bfin_serial_mem_device = {
+ .name = "bfin_uart_mem",
+ .start = serial_mem_init,
+ .setbrg = serial_mem_setbrg,
+ .getc = serial_mem_getc,
+ .tstc = serial_mem_tstc,
+ .putc = serial_mem_putc,
+ .puts = serial_mem_puts,
+};
+
+
+__weak struct serial_device *default_serial_console(void)
{
- uart_loop(UART_BASE, state);
+ return &bfin_serial_mem_device;
}
-)
-#endif
-
-#endif
+void bfin_serial_initialize(void)
+{
+ serial_register(&bfin_serial_mem_device);
+}
+#endif /* CONFIG_UART_MEM */
diff --git a/drivers/serial/serial_ns16550.c b/drivers/serial/serial_ns16550.c
index b92eef4..3c07da3 100644
--- a/drivers/serial/serial_ns16550.c
+++ b/drivers/serial/serial_ns16550.c
@@ -151,12 +151,7 @@
}
#endif
-#ifdef CONFIG_APTIX
-#define MODE_X_DIV 13
-#else
#define MODE_X_DIV 16
-#endif
-
/* Compute divisor value. Normally, we should simply return:
* CONFIG_SYS_NS16550_CLK) / MODE_X_DIV / gd->baudrate
* but we need to round that value by adding 0.5.
diff --git a/drivers/serial/serial_s5p.c b/drivers/serial/serial_s5p.c
index 3c41242..6836c7a 100644
--- a/drivers/serial/serial_s5p.c
+++ b/drivers/serial/serial_s5p.c
@@ -22,6 +22,7 @@
*/
#include <common.h>
+#include <fdtdec.h>
#include <linux/compiler.h>
#include <asm/io.h>
#include <asm/arch/uart.h>
@@ -30,10 +31,25 @@
DECLARE_GLOBAL_DATA_PTR;
+#define RX_FIFO_COUNT_MASK 0xff
+#define RX_FIFO_FULL_MASK (1 << 8)
+#define TX_FIFO_FULL_MASK (1 << 24)
+
+/* Information about a serial port */
+struct fdt_serial {
+ u32 base_addr; /* address of registers in physical memory */
+ u8 port_id; /* uart port number */
+ u8 enabled; /* 1 if enabled, 0 if disabled */
+} config __attribute__ ((section(".data")));
+
static inline struct s5p_uart *s5p_get_base_uart(int dev_index)
{
+#ifdef CONFIG_OF_CONTROL
+ return (struct s5p_uart *)(config.base_addr);
+#else
u32 offset = dev_index * sizeof(struct s5p_uart);
return (struct s5p_uart *)(samsung_get_base_uart() + offset);
+#endif
}
/*
@@ -69,6 +85,16 @@
u32 baudrate = gd->baudrate;
u32 val;
+#if defined(CONFIG_SILENT_CONSOLE) && \
+ defined(CONFIG_OF_CONTROL) && \
+ !defined(CONFIG_SPL_BUILD)
+ if (fdtdec_get_config_int(gd->fdt_blob, "silent_console", 0))
+ gd->flags |= GD_FLG_SILENT;
+#endif
+
+ if (!config.enabled)
+ return;
+
val = uclk / baudrate;
writel(val / 16 - 1, &uart->ubrdiv);
@@ -87,8 +113,8 @@
{
struct s5p_uart *const uart = s5p_get_base_uart(dev_index);
- /* reset and enable FIFOs, set triggers to the maximum */
- writel(0, &uart->ufcon);
+ /* enable FIFOs */
+ writel(0x1, &uart->ufcon);
writel(0, &uart->umcon);
/* 8N1 */
writel(0x3, &uart->ulcon);
@@ -129,8 +155,12 @@
{
struct s5p_uart *const uart = s5p_get_base_uart(dev_index);
+ if (!config.enabled)
+ return 0;
+
/* wait for character to arrive */
- while (!(readl(&uart->utrstat) & 0x1)) {
+ while (!(readl(&uart->ufstat) & (RX_FIFO_COUNT_MASK |
+ RX_FIFO_FULL_MASK))) {
if (serial_err_check(dev_index, 0))
return 0;
}
@@ -145,8 +175,11 @@
{
struct s5p_uart *const uart = s5p_get_base_uart(dev_index);
+ if (!config.enabled)
+ return;
+
/* wait for room in the tx FIFO */
- while (!(readl(&uart->utrstat) & 0x2)) {
+ while ((readl(&uart->ufstat) & TX_FIFO_FULL_MASK)) {
if (serial_err_check(dev_index, 1))
return;
}
@@ -165,6 +198,9 @@
{
struct s5p_uart *const uart = s5p_get_base_uart(dev_index);
+ if (!config.enabled)
+ return 0;
+
return (int)(readl(&uart->utrstat) & 0x1);
}
@@ -207,8 +243,54 @@
struct serial_device s5p_serial3_device =
INIT_S5P_SERIAL_STRUCTURE(3, "s5pser3");
+#ifdef CONFIG_OF_CONTROL
+int fdtdec_decode_console(int *index, struct fdt_serial *uart)
+{
+ const void *blob = gd->fdt_blob;
+ int node;
+
+ node = fdt_path_offset(blob, "console");
+ if (node < 0)
+ return node;
+
+ uart->base_addr = fdtdec_get_addr(blob, node, "reg");
+ if (uart->base_addr == FDT_ADDR_T_NONE)
+ return -FDT_ERR_NOTFOUND;
+
+ uart->port_id = fdtdec_get_int(blob, node, "id", -1);
+ uart->enabled = fdtdec_get_is_enabled(blob, node);
+
+ return 0;
+}
+#endif
+
__weak struct serial_device *default_serial_console(void)
{
+#ifdef CONFIG_OF_CONTROL
+ int index = 0;
+
+ if ((!config.base_addr) && (fdtdec_decode_console(&index, &config))) {
+ debug("Cannot decode default console node\n");
+ return NULL;
+ }
+
+ switch (config.port_id) {
+ case 0:
+ return &s5p_serial0_device;
+ case 1:
+ return &s5p_serial1_device;
+ case 2:
+ return &s5p_serial2_device;
+ case 3:
+ return &s5p_serial3_device;
+ default:
+ debug("Unknown config.port_id: %d", config.port_id);
+ break;
+ }
+
+ return NULL;
+#else
+ config.enabled = 1;
#if defined(CONFIG_SERIAL0)
return &s5p_serial0_device;
#elif defined(CONFIG_SERIAL1)
@@ -220,6 +302,7 @@
#else
#error "CONFIG_SERIAL? missing."
#endif
+#endif
}
void s5p_serial_initialize(void)
diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
index f4b1bad..52594e3 100644
--- a/drivers/spi/atmel_spi.c
+++ b/drivers/spi/atmel_spi.c
@@ -30,6 +30,15 @@
#include "atmel_spi.h"
+static int spi_has_wdrbt(struct atmel_spi_slave *slave)
+{
+ unsigned int ver;
+
+ ver = spi_readl(slave, VERSION);
+
+ return (ATMEL_SPI_VERSION_REV(ver) >= 0x210);
+}
+
void spi_init()
{
@@ -90,10 +99,10 @@
as->regs = regs;
as->mr = ATMEL_SPI_MR_MSTR | ATMEL_SPI_MR_MODFDIS
-#if defined(CONFIG_AT91SAM9X5) || defined(CONFIG_AT91SAM9M10G45)
- | ATMEL_SPI_MR_WDRBT
-#endif
| ATMEL_SPI_MR_PCS(~(1 << cs) & 0xf);
+ if (spi_has_wdrbt(as))
+ as->mr |= ATMEL_SPI_MR_WDRBT;
+
spi_writel(as, CSR(cs), csrx);
return &as->slave;
diff --git a/drivers/spi/atmel_spi.h b/drivers/spi/atmel_spi.h
index 057de9a..d240945 100644
--- a/drivers/spi/atmel_spi.h
+++ b/drivers/spi/atmel_spi.h
@@ -64,7 +64,7 @@
#define ATMEL_SPI_CSRx_DLYBCT(x) ((x) << 24)
/* Bits in VERSION */
-#define ATMEL_SPI_VERSION_REV(x) ((x) << 0)
+#define ATMEL_SPI_VERSION_REV(x) ((x) & 0xfff)
#define ATMEL_SPI_VERSION_MFN(x) ((x) << 16)
/* Constants for CSRx:BITS */
diff --git a/drivers/spi/bfin_spi.c b/drivers/spi/bfin_spi.c
index ab2e8b9..a9a4d92 100644
--- a/drivers/spi/bfin_spi.c
+++ b/drivers/spi/bfin_spi.c
@@ -13,7 +13,6 @@
#include <spi.h>
#include <asm/blackfin.h>
-#include <asm/dma.h>
#include <asm/gpio.h>
#include <asm/portmux.h>
#include <asm/mach-common/bits/spi.h>
@@ -242,109 +241,15 @@
SSYNC();
}
-#ifdef __ADSPBF54x__
-# define SPI_DMA_BASE DMA4_NEXT_DESC_PTR
-#elif defined(__ADSPBF533__) || defined(__ADSPBF532__) || defined(__ADSPBF531__) || \
- defined(__ADSPBF538__) || defined(__ADSPBF539__)
-# define SPI_DMA_BASE DMA5_NEXT_DESC_PTR
-#elif defined(__ADSPBF561__)
-# define SPI_DMA_BASE DMA2_4_NEXT_DESC_PTR
-#elif defined(__ADSPBF537__) || defined(__ADSPBF536__) || defined(__ADSPBF534__) || \
- defined(__ADSPBF52x__) || defined(__ADSPBF51x__)
-# define SPI_DMA_BASE DMA7_NEXT_DESC_PTR
-# elif defined(__ADSPBF50x__)
-# define SPI_DMA_BASE DMA6_NEXT_DESC_PTR
-#else
-# error "Please provide SPI DMA channel defines"
-#endif
-static volatile struct dma_register *dma = (void *)SPI_DMA_BASE;
-
#ifndef CONFIG_BFIN_SPI_IDLE_VAL
# define CONFIG_BFIN_SPI_IDLE_VAL 0xff
#endif
-#ifdef CONFIG_BFIN_SPI_NO_DMA
-# define SPI_DMA 0
-#else
-# define SPI_DMA 1
-#endif
-
-static int spi_dma_xfer(struct bfin_spi_slave *bss, const u8 *tx, u8 *rx,
- uint bytes)
-{
- int ret = -1;
- u16 ndsize, spi_config, dma_config;
- struct dmasg dmasg[2];
- const u8 *buf;
-
- if (tx) {
- debug("%s: doing half duplex TX\n", __func__);
- buf = tx;
- spi_config = TDBR_DMA;
- dma_config = 0;
- } else {
- debug("%s: doing half duplex RX\n", __func__);
- buf = rx;
- spi_config = RDBR_DMA;
- dma_config = WNR;
- }
-
- dmasg[0].start_addr = (unsigned long)buf;
- dmasg[0].x_modify = 1;
- dma_config |= WDSIZE_8 | DMAEN;
- if (bytes <= 65536) {
- blackfin_dcache_flush_invalidate_range(buf, buf + bytes);
- ndsize = NDSIZE_5;
- dmasg[0].cfg = NDSIZE_0 | dma_config | FLOW_STOP | DI_EN;
- dmasg[0].x_count = bytes;
- } else {
- blackfin_dcache_flush_invalidate_range(buf, buf + 65536 - 1);
- ndsize = NDSIZE_7;
- dmasg[0].cfg = NDSIZE_5 | dma_config | FLOW_ARRAY | DMA2D;
- dmasg[0].x_count = 0; /* 2^16 */
- dmasg[0].y_count = bytes >> 16; /* count / 2^16 */
- dmasg[0].y_modify = 1;
- dmasg[1].start_addr = (unsigned long)(buf + (bytes & ~0xFFFF));
- dmasg[1].cfg = NDSIZE_0 | dma_config | FLOW_STOP | DI_EN;
- dmasg[1].x_count = bytes & 0xFFFF; /* count % 2^16 */
- dmasg[1].x_modify = 1;
- }
-
- dma->cfg = 0;
- dma->irq_status = DMA_DONE | DMA_ERR;
- dma->curr_desc_ptr = dmasg;
- write_SPI_CTL(bss, (bss->ctl & ~TDBR_CORE));
- write_SPI_STAT(bss, -1);
- SSYNC();
-
- write_SPI_TDBR(bss, CONFIG_BFIN_SPI_IDLE_VAL);
- dma->cfg = ndsize | FLOW_ARRAY | DMAEN;
- write_SPI_CTL(bss, (bss->ctl & ~TDBR_CORE) | spi_config);
- SSYNC();
-
- /*
- * We already invalidated the first 64k,
- * now while we just wait invalidate the remaining part.
- * Its not likely that the DMA is going to overtake
- */
- if (bytes > 65536)
- blackfin_dcache_flush_invalidate_range(buf + 65536, buf + bytes);
-
- while (!(dma->irq_status & DMA_DONE))
- if (ctrlc())
- goto done;
-
- dma->cfg = 0;
-
- ret = 0;
- done:
- write_SPI_CTL(bss, bss->ctl);
- return ret;
-}
-
static int spi_pio_xfer(struct bfin_spi_slave *bss, const u8 *tx, u8 *rx,
uint bytes)
{
+ /* discard invalid data and clear RXS */
+ read_SPI_RDBR(bss);
/* todo: take advantage of hardware fifos */
while (bytes--) {
u8 value = (tx ? *tx++ : CONFIG_BFIN_SPI_IDLE_VAL);
@@ -393,11 +298,7 @@
if (flags & SPI_XFER_BEGIN)
spi_cs_activate(slave);
- /* TX DMA doesn't work quite right */
- if (SPI_DMA && bytes > 6 && (!tx /*|| !rx*/))
- ret = spi_dma_xfer(bss, tx, rx, bytes);
- else
- ret = spi_pio_xfer(bss, tx, rx, bytes);
+ ret = spi_pio_xfer(bss, tx, rx, bytes);
done:
if (flags & SPI_XFER_END)
diff --git a/drivers/usb/eth/smsc95xx.c b/drivers/usb/eth/smsc95xx.c
index fd8f8a7..685702e 100644
--- a/drivers/usb/eth/smsc95xx.c
+++ b/drivers/usb/eth/smsc95xx.c
@@ -798,6 +798,7 @@
static const struct smsc95xx_dongle smsc95xx_dongles[] = {
{ 0x0424, 0xec00 }, /* LAN9512/LAN9514 Ethernet */
{ 0x0424, 0x9500 }, /* LAN9500 Ethernet */
+ { 0x0424, 0x9730 }, /* LAN9730 Ethernet (HSIC) */
{ 0x0000, 0x0000 } /* END - Do not remove */
};
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index c816878..e0f3e4b 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -122,6 +122,31 @@
#define ehci_is_TDI() (0)
#endif
+int __ehci_get_port_speed(struct ehci_hcor *hcor, uint32_t reg)
+{
+ return PORTSC_PSPD(reg);
+}
+
+int ehci_get_port_speed(struct ehci_hcor *hcor, uint32_t reg)
+ __attribute__((weak, alias("__ehci_get_port_speed")));
+
+void __ehci_set_usbmode(int index)
+{
+ uint32_t tmp;
+ uint32_t *reg_ptr;
+
+ reg_ptr = (uint32_t *)((u8 *)&ehcic[index].hcor->or_usbcmd + USBMODE);
+ tmp = ehci_readl(reg_ptr);
+ tmp |= USBMODE_CM_HC;
+#if defined(CONFIG_EHCI_MMIO_BIG_ENDIAN)
+ tmp |= USBMODE_BE;
+#endif
+ ehci_writel(reg_ptr, tmp);
+}
+
+void ehci_set_usbmode(int index)
+ __attribute__((weak, alias("__ehci_set_usbmode")));
+
void __ehci_powerup_fixup(uint32_t *status_reg, uint32_t *reg)
{
mdelay(50);
@@ -149,8 +174,6 @@
static int ehci_reset(int index)
{
uint32_t cmd;
- uint32_t tmp;
- uint32_t *reg_ptr;
int ret = 0;
cmd = ehci_readl(&ehcic[index].hcor->or_usbcmd);
@@ -163,15 +186,8 @@
goto out;
}
- if (ehci_is_TDI()) {
- reg_ptr = (uint32_t *)((u8 *)ehcic[index].hcor + USBMODE);
- tmp = ehci_readl(reg_ptr);
- tmp |= USBMODE_CM_HC;
-#if defined(CONFIG_EHCI_MMIO_BIG_ENDIAN)
- tmp |= USBMODE_BE;
-#endif
- ehci_writel(reg_ptr, tmp);
- }
+ if (ehci_is_TDI())
+ ehci_set_usbmode(index);
#ifdef CONFIG_USB_EHCI_TXFIFO_THRESH
cmd = ehci_readl(&ehcic[index].hcor->or_txfilltuning);
@@ -587,16 +603,6 @@
return -1;
}
-static inline int min3(int a, int b, int c)
-{
-
- if (b < a)
- a = b;
- if (c < a)
- a = c;
- return a;
-}
-
int
ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
int length, struct devrequest *req)
@@ -607,15 +613,14 @@
int len, srclen;
uint32_t reg;
uint32_t *status_reg;
+ int port = le16_to_cpu(req->index) & 0xff;
struct ehci_ctrl *ctrl = dev->controller;
- if (le16_to_cpu(req->index) > CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS) {
- printf("The request port(%d) is not configured\n",
- le16_to_cpu(req->index) - 1);
+ if (port > CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS) {
+ printf("The request port(%d) is not configured\n", port - 1);
return -1;
}
- status_reg = (uint32_t *)&ctrl->hcor->or_portsc[
- le16_to_cpu(req->index) - 1];
+ status_reg = (uint32_t *)&ctrl->hcor->or_portsc[port - 1];
srclen = 0;
debug("req=%u (%#x), type=%u (%#x), value=%u, index=%u\n",
@@ -711,7 +716,7 @@
tmpbuf[1] |= USB_PORT_STAT_POWER >> 8;
if (ehci_is_TDI()) {
- switch (PORTSC_PSPD(reg)) {
+ switch (ehci_get_port_speed(ctrl->hcor, reg)) {
case PORTSC_PSPD_FS:
break;
case PORTSC_PSPD_LS:
@@ -732,7 +737,7 @@
tmpbuf[2] |= USB_PORT_STAT_C_ENABLE;
if (reg & EHCI_PS_OCC)
tmpbuf[2] |= USB_PORT_STAT_C_OVERCURRENT;
- if (ctrl->portreset & (1 << le16_to_cpu(req->index)))
+ if (ctrl->portreset & (1 << port))
tmpbuf[2] |= USB_PORT_STAT_C_RESET;
srcptr = tmpbuf;
@@ -758,7 +763,7 @@
EHCI_PS_IS_LOWSPEED(reg)) {
/* Low speed device, give up ownership. */
debug("port %d low speed --> companion\n",
- req->index - 1);
+ port - 1);
reg |= EHCI_PS_PO;
ehci_writel(status_reg, reg);
break;
@@ -784,13 +789,17 @@
ret = handshake(status_reg, EHCI_PS_PR, 0,
2 * 1000);
if (!ret)
- ctrl->portreset |=
- 1 << le16_to_cpu(req->index);
+ ctrl->portreset |= 1 << port;
else
printf("port(%d) reset error\n",
- le16_to_cpu(req->index) - 1);
+ port - 1);
}
break;
+ case USB_PORT_FEAT_TEST:
+ reg &= ~(0xf << 16);
+ reg |= ((le16_to_cpu(req->index) >> 8) & 0xf) << 16;
+ ehci_writel(status_reg, reg);
+ break;
default:
debug("unknown feature %x\n", le16_to_cpu(req->value));
goto unknown;
@@ -817,7 +826,7 @@
reg = (reg & ~EHCI_PS_CLEAR) | EHCI_PS_OCC;
break;
case USB_PORT_FEAT_C_RESET:
- ctrl->portreset &= ~(1 << le16_to_cpu(req->index));
+ ctrl->portreset &= ~(1 << port);
break;
default:
debug("unknown feature %x\n", le16_to_cpu(req->value));
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index 554145a..a9603bc 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -1,6 +1,6 @@
/*
* Copyright (c) 2011 The Chromium OS Authors.
- * Copyright (c) 2009-2012 NVIDIA Corporation
+ * Copyright (c) 2009-2013 NVIDIA Corporation
* Copyright (c) 2013 Lucas Stach
*
* See file CREDITS for list of people who contributed to this
@@ -28,6 +28,8 @@
#include <asm-generic/gpio.h>
#include <asm/arch/clock.h>
#include <asm/arch-tegra/usb.h>
+#include <asm/arch-tegra/clk_rst.h>
+#include <asm/arch/usb.h>
#include <usb.h>
#include <usb/ulpi.h>
#include <libfdt.h>
@@ -35,6 +37,11 @@
#include "ehci.h"
+#define USB1_ADDR_MASK 0xFFFF0000
+
+#define HOSTPC1_DEVLC 0x84
+#define HOSTPC1_PSPD(x) (((x) >> 25) & 0x3)
+
#ifdef CONFIG_USB_ULPI
#ifndef CONFIG_USB_ULPI_VIEWPORT
#error "To use CONFIG_USB_ULPI on Tegra Boards you have to also \
@@ -87,6 +94,8 @@
static struct fdt_usb port[USB_PORTS_MAX]; /* List of valid USB ports */
static unsigned port_count; /* Number of available ports */
+/* Port that needs to clear CSC after Port Reset */
+static u32 port_addr_clear_csc;
/*
* This table has USB timing parameters for each Oscillator frequency we
@@ -129,7 +138,7 @@
*
* 4. The 20 microsecond delay after bias cell operation.
*/
-static const unsigned usb_pll[CLOCK_OSC_FREQ_COUNT][PARAM_COUNT] = {
+static const unsigned T20_usb_pll[CLOCK_OSC_FREQ_COUNT][PARAM_COUNT] = {
/* DivN, DivM, DivP, CPCON, LFCON, Delays Debounce, Bias */
{ 0x3C0, 0x0D, 0x00, 0xC, 0, 0x02, 0x33, 0x05, 0x7F, 0x7EF4, 5 },
{ 0x0C8, 0x04, 0x00, 0x3, 0, 0x03, 0x4B, 0x06, 0xBB, 0xBB80, 7 },
@@ -137,6 +146,22 @@
{ 0x3C0, 0x1A, 0x00, 0xC, 0, 0x04, 0x66, 0x09, 0xFE, 0xFDE8, 9 }
};
+static const unsigned T30_usb_pll[CLOCK_OSC_FREQ_COUNT][PARAM_COUNT] = {
+ /* DivN, DivM, DivP, CPCON, LFCON, Delays Debounce, Bias */
+ { 0x3C0, 0x0D, 0x00, 0xC, 1, 0x02, 0x33, 0x09, 0x7F, 0x7EF4, 5 },
+ { 0x0C8, 0x04, 0x00, 0x3, 0, 0x03, 0x4B, 0x0C, 0xBB, 0xBB80, 7 },
+ { 0x3C0, 0x0C, 0x00, 0xC, 1, 0x02, 0x2F, 0x08, 0x76, 0x7530, 5 },
+ { 0x3C0, 0x1A, 0x00, 0xC, 1, 0x04, 0x66, 0x09, 0xFE, 0xFDE8, 9 }
+};
+
+static const unsigned T114_usb_pll[CLOCK_OSC_FREQ_COUNT][PARAM_COUNT] = {
+ /* DivN, DivM, DivP, CPCON, LFCON, Delays Debounce, Bias */
+ { 0x3C0, 0x0D, 0x00, 0xC, 2, 0x02, 0x33, 0x09, 0x7F, 0x7EF4, 6 },
+ { 0x0C8, 0x04, 0x00, 0x3, 2, 0x03, 0x4B, 0x0C, 0xBB, 0xBB80, 8 },
+ { 0x3C0, 0x0C, 0x00, 0xC, 2, 0x02, 0x2F, 0x08, 0x76, 0x7530, 5 },
+ { 0x3C0, 0x1A, 0x00, 0xC, 2, 0x04, 0x66, 0x09, 0xFE, 0xFDE8, 0xB }
+};
+
/* UTMIP Idle Wait Delay */
static const u8 utmip_idle_wait_delay = 17;
@@ -146,6 +171,33 @@
/* UTMIP High Speed Sync Start Delay */
static const u8 utmip_hs_sync_start_delay = 9;
+struct fdt_usb_controller {
+ int compat;
+ /* flag to determine whether controller supports hostpc register */
+ u32 has_hostpc:1;
+ const unsigned *pll_parameter;
+};
+
+static struct fdt_usb_controller fdt_usb_controllers[] = {
+ {
+ .compat = COMPAT_NVIDIA_TEGRA20_USB,
+ .has_hostpc = 0,
+ .pll_parameter = (const unsigned *)T20_usb_pll,
+ },
+ {
+ .compat = COMPAT_NVIDIA_TEGRA30_USB,
+ .has_hostpc = 1,
+ .pll_parameter = (const unsigned *)T30_usb_pll,
+ },
+ {
+ .compat = COMPAT_NVIDIA_TEGRA114_USB,
+ .has_hostpc = 1,
+ .pll_parameter = (const unsigned *)T114_usb_pll,
+ },
+};
+
+static struct fdt_usb_controller *controller;
+
/*
* A known hardware issue where Connect Status Change bit of PORTSC register
* of USB1 controller will be set after Port Reset.
@@ -156,13 +208,52 @@
void ehci_powerup_fixup(uint32_t *status_reg, uint32_t *reg)
{
mdelay(50);
- if (((u32) status_reg & TEGRA_USB_ADDR_MASK) != TEGRA_USB1_BASE)
+ /* This is to avoid PORT_ENABLE bit to be cleared in "ehci-hcd.c". */
+ if (controller->has_hostpc)
+ *reg |= EHCI_PS_PE;
+
+ if (((u32)status_reg & TEGRA_USB_ADDR_MASK) != port_addr_clear_csc)
return;
/* For EHCI_PS_CSC to be cleared in ehci_hcd.c */
if (ehci_readl(status_reg) & EHCI_PS_CSC)
*reg |= EHCI_PS_CSC;
}
+/*
+ * This ehci_set_usbmode overrides the weak function ehci_set_usbmode
+ * in "ehci-hcd.c".
+ */
+void ehci_set_usbmode(int index)
+{
+ struct fdt_usb *config;
+ struct usb_ctlr *usbctlr;
+ uint32_t tmp;
+
+ config = &port[index];
+ usbctlr = config->reg;
+
+ tmp = ehci_readl(&usbctlr->usb_mode);
+ tmp |= USBMODE_CM_HC;
+ ehci_writel(&usbctlr->usb_mode, tmp);
+}
+
+/*
+ * This ehci_get_port_speed overrides the weak function ehci_get_port_speed
+ * in "ehci-hcd.c".
+ */
+int ehci_get_port_speed(struct ehci_hcor *hcor, uint32_t reg)
+{
+ uint32_t tmp;
+ uint32_t *reg_ptr;
+
+ if (controller->has_hostpc) {
+ reg_ptr = (uint32_t *)((u8 *)&hcor->or_usbcmd + HOSTPC1_DEVLC);
+ tmp = ehci_readl(reg_ptr);
+ return HOSTPC1_PSPD(tmp);
+ } else
+ return PORTSC_PSPD(reg);
+}
+
/* Put the port into host mode */
static void set_host_mode(struct fdt_usb *config)
{
@@ -209,6 +300,16 @@
setbits_le32(&usbctlr->susp_ctrl, UTMIP_PHY_ENB);
}
+static const unsigned *get_pll_timing(void)
+{
+ const unsigned *timing;
+
+ timing = controller->pll_parameter +
+ clock_get_osc_freq() * PARAM_COUNT;
+
+ return timing;
+}
+
/* set up the UTMI USB controller with the parameters provided */
static int init_utmi_usb_controller(struct fdt_usb *config)
{
@@ -216,6 +317,8 @@
int loop_count;
const unsigned *timing;
struct usb_ctlr *usbctlr = config->reg;
+ struct clk_rst_ctlr *clkrst;
+ struct usb_ctlr *usb1ctlr;
clock_enable(config->periph_id);
@@ -232,35 +335,97 @@
* To Use the A Session Valid for cable detection logic, VBUS_WAKEUP
* mux must be switched to actually use a_sess_vld threshold.
*/
- if (fdt_gpio_isvalid(&config->vbus_gpio)) {
+ if (config->dr_mode == DR_MODE_OTG &&
+ fdt_gpio_isvalid(&config->vbus_gpio))
clrsetbits_le32(&usbctlr->usb1_legacy_ctrl,
VBUS_SENSE_CTL_MASK,
VBUS_SENSE_CTL_A_SESS_VLD << VBUS_SENSE_CTL_SHIFT);
- }
/*
* PLL Delay CONFIGURATION settings. The following parameters control
* the bring up of the plls.
*/
- timing = usb_pll[clock_get_osc_freq()];
+ timing = get_pll_timing();
- val = readl(&usbctlr->utmip_misc_cfg1);
- clrsetbits_le32(&val, UTMIP_PLLU_STABLE_COUNT_MASK,
- timing[PARAM_STABLE_COUNT] << UTMIP_PLLU_STABLE_COUNT_SHIFT);
- clrsetbits_le32(&val, UTMIP_PLL_ACTIVE_DLY_COUNT_MASK,
- timing[PARAM_ACTIVE_DELAY_COUNT] <<
- UTMIP_PLL_ACTIVE_DLY_COUNT_SHIFT);
- writel(val, &usbctlr->utmip_misc_cfg1);
+ if (!controller->has_hostpc) {
+ val = readl(&usbctlr->utmip_misc_cfg1);
+ clrsetbits_le32(&val, UTMIP_PLLU_STABLE_COUNT_MASK,
+ timing[PARAM_STABLE_COUNT] <<
+ UTMIP_PLLU_STABLE_COUNT_SHIFT);
+ clrsetbits_le32(&val, UTMIP_PLL_ACTIVE_DLY_COUNT_MASK,
+ timing[PARAM_ACTIVE_DELAY_COUNT] <<
+ UTMIP_PLL_ACTIVE_DLY_COUNT_SHIFT);
+ writel(val, &usbctlr->utmip_misc_cfg1);
- /* Set PLL enable delay count and crystal frequency count */
- val = readl(&usbctlr->utmip_pll_cfg1);
- clrsetbits_le32(&val, UTMIP_PLLU_ENABLE_DLY_COUNT_MASK,
- timing[PARAM_ENABLE_DELAY_COUNT] <<
- UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT);
- clrsetbits_le32(&val, UTMIP_XTAL_FREQ_COUNT_MASK,
- timing[PARAM_XTAL_FREQ_COUNT] <<
- UTMIP_XTAL_FREQ_COUNT_SHIFT);
- writel(val, &usbctlr->utmip_pll_cfg1);
+ /* Set PLL enable delay count and crystal frequency count */
+ val = readl(&usbctlr->utmip_pll_cfg1);
+ clrsetbits_le32(&val, UTMIP_PLLU_ENABLE_DLY_COUNT_MASK,
+ timing[PARAM_ENABLE_DELAY_COUNT] <<
+ UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT);
+ clrsetbits_le32(&val, UTMIP_XTAL_FREQ_COUNT_MASK,
+ timing[PARAM_XTAL_FREQ_COUNT] <<
+ UTMIP_XTAL_FREQ_COUNT_SHIFT);
+ writel(val, &usbctlr->utmip_pll_cfg1);
+ } else {
+ clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+
+ val = readl(&clkrst->crc_utmip_pll_cfg2);
+ clrsetbits_le32(&val, UTMIP_PLLU_STABLE_COUNT_MASK,
+ timing[PARAM_STABLE_COUNT] <<
+ UTMIP_PLLU_STABLE_COUNT_SHIFT);
+ clrsetbits_le32(&val, UTMIP_PLL_ACTIVE_DLY_COUNT_MASK,
+ timing[PARAM_ACTIVE_DELAY_COUNT] <<
+ UTMIP_PLL_ACTIVE_DLY_COUNT_SHIFT);
+ writel(val, &clkrst->crc_utmip_pll_cfg2);
+
+ /* Set PLL enable delay count and crystal frequency count */
+ val = readl(&clkrst->crc_utmip_pll_cfg1);
+ clrsetbits_le32(&val, UTMIP_PLLU_ENABLE_DLY_COUNT_MASK,
+ timing[PARAM_ENABLE_DELAY_COUNT] <<
+ UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT);
+ clrsetbits_le32(&val, UTMIP_XTAL_FREQ_COUNT_MASK,
+ timing[PARAM_XTAL_FREQ_COUNT] <<
+ UTMIP_XTAL_FREQ_COUNT_SHIFT);
+ writel(val, &clkrst->crc_utmip_pll_cfg1);
+
+ /* Disable Power Down state for PLL */
+ clrbits_le32(&clkrst->crc_utmip_pll_cfg1,
+ PLLU_POWERDOWN | PLL_ENABLE_POWERDOWN |
+ PLL_ACTIVE_POWERDOWN);
+
+ /* Recommended PHY settings for EYE diagram */
+ val = readl(&usbctlr->utmip_xcvr_cfg0);
+ clrsetbits_le32(&val, UTMIP_XCVR_SETUP_MASK,
+ 0x4 << UTMIP_XCVR_SETUP_SHIFT);
+ clrsetbits_le32(&val, UTMIP_XCVR_SETUP_MSB_MASK,
+ 0x3 << UTMIP_XCVR_SETUP_MSB_SHIFT);
+ clrsetbits_le32(&val, UTMIP_XCVR_HSSLEW_MSB_MASK,
+ 0x8 << UTMIP_XCVR_HSSLEW_MSB_SHIFT);
+ writel(val, &usbctlr->utmip_xcvr_cfg0);
+ clrsetbits_le32(&usbctlr->utmip_xcvr_cfg1,
+ UTMIP_XCVR_TERM_RANGE_ADJ_MASK,
+ 0x7 << UTMIP_XCVR_TERM_RANGE_ADJ_SHIFT);
+
+ /* Some registers can be controlled from USB1 only. */
+ if (config->periph_id != PERIPH_ID_USBD) {
+ clock_enable(PERIPH_ID_USBD);
+ /* Disable Reset if in Reset state */
+ reset_set_enable(PERIPH_ID_USBD, 0);
+ }
+ usb1ctlr = (struct usb_ctlr *)
+ ((u32)config->reg & USB1_ADDR_MASK);
+ val = readl(&usb1ctlr->utmip_bias_cfg0);
+ setbits_le32(&val, UTMIP_HSDISCON_LEVEL_MSB);
+ clrsetbits_le32(&val, UTMIP_HSDISCON_LEVEL_MASK,
+ 0x1 << UTMIP_HSDISCON_LEVEL_SHIFT);
+ clrsetbits_le32(&val, UTMIP_HSSQUELCH_LEVEL_MASK,
+ 0x2 << UTMIP_HSSQUELCH_LEVEL_SHIFT);
+ writel(val, &usb1ctlr->utmip_bias_cfg0);
+
+ /* Miscellaneous setting mentioned in Programming Guide */
+ clrbits_le32(&usbctlr->utmip_misc_cfg0,
+ UTMIP_SUSPEND_EXIT_ON_EDGE);
+ }
/* Setting the tracking length time */
clrsetbits_le32(&usbctlr->utmip_bias_cfg1,
@@ -308,6 +473,14 @@
/* Resuscitate crystal clock by setting UTMIP_PHY_XTAL_CLOCKEN */
setbits_le32(&usbctlr->utmip_misc_cfg1, UTMIP_PHY_XTAL_CLOCKEN);
+ if (controller->has_hostpc) {
+ if (config->periph_id == PERIPH_ID_USBD)
+ clrbits_le32(&clkrst->crc_utmip_pll_cfg2,
+ UTMIP_FORCE_PD_SAMP_A_POWERDOWN);
+ if (config->periph_id == PERIPH_ID_USB3)
+ clrbits_le32(&clkrst->crc_utmip_pll_cfg2,
+ UTMIP_FORCE_PD_SAMP_C_POWERDOWN);
+ }
/* Finished the per-controller init. */
/* De-assert UTMIP_RESET to bring out of reset. */
@@ -336,6 +509,18 @@
clrbits_le32(&usbctlr->utmip_xcvr_cfg1, UTMIP_FORCE_PDDISC_POWERDOWN |
UTMIP_FORCE_PDCHRP_POWERDOWN | UTMIP_FORCE_PDDR_POWERDOWN);
+ if (controller->has_hostpc) {
+ /*
+ * BIAS Pad Power Down is common among all 3 USB
+ * controllers and can be controlled from USB1 only.
+ */
+ usb1ctlr = (struct usb_ctlr *)
+ ((u32)config->reg & USB1_ADDR_MASK);
+ clrbits_le32(&usb1ctlr->utmip_bias_cfg0, UTMIP_BIASPD);
+ udelay(25);
+ clrbits_le32(&usb1ctlr->utmip_bias_cfg1,
+ UTMIP_FORCE_PDTRK_POWERDOWN);
+ }
return 0;
}
@@ -438,7 +623,7 @@
timing[PARAM_CPCON], timing[PARAM_LFCON]);
}
-int fdt_decode_usb(const void *blob, int node, struct fdt_usb *config)
+static int fdt_decode_usb(const void *blob, int node, struct fdt_usb *config)
{
const char *phy, *mode;
@@ -466,6 +651,8 @@
config->enabled = fdtdec_get_is_enabled(blob, node);
config->has_legacy_mode = fdtdec_get_bool(blob, node,
"nvidia,has-legacy-mode");
+ if (config->has_legacy_mode)
+ port_addr_clear_csc = (u32) config->reg;
config->periph_id = clock_decode_periph_id(blob, node);
if (config->periph_id == PERIPH_ID_NONE) {
debug("%s: Missing/invalid peripheral ID\n", __func__);
@@ -483,20 +670,22 @@
return 0;
}
-int board_usb_init(const void *blob)
+/*
+ * process_usb_nodes() - Process a list of USB nodes, adding them to our list
+ * of USB ports.
+ * @blob: fdt blob
+ * @node_list: list of nodes to process (any <=0 are ignored)
+ * @count: number of nodes to process
+ *
+ * Return: 0 - ok, -1 - error
+ */
+static int process_usb_nodes(const void *blob, int node_list[], int count)
{
struct fdt_usb config;
- enum clock_osc_freq freq;
- int node_list[USB_PORTS_MAX];
- int node, count, i;
+ int node, i;
+ int clk_done = 0;
- /* Set up the USB clocks correctly based on our oscillator frequency */
- freq = clock_get_osc_freq();
- config_clock(usb_pll[freq]);
-
- /* count may return <0 on error */
- count = fdtdec_find_aliases_for_id(blob, "usb",
- COMPAT_NVIDIA_TEGRA20_USB, node_list, USB_PORTS_MAX);
+ port_count = 0;
for (i = 0; i < count; i++) {
if (port_count == USB_PORTS_MAX) {
printf("tegrausb: Cannot register more than %d ports\n",
@@ -513,6 +702,10 @@
fdt_get_name(blob, node, NULL));
return -1;
}
+ if (!clk_done) {
+ config_clock(get_pll_timing());
+ clk_done = 1;
+ }
config.initialized = 0;
/* add new USB port to the list of available ports */
@@ -522,6 +715,31 @@
return 0;
}
+int board_usb_init(const void *blob)
+{
+ int node_list[USB_PORTS_MAX];
+ int count, err = 0;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(fdt_usb_controllers); i++) {
+ controller = &fdt_usb_controllers[i];
+
+ count = fdtdec_find_aliases_for_id(blob, "usb",
+ controller->compat, node_list, USB_PORTS_MAX);
+ if (count) {
+ err = process_usb_nodes(blob, node_list, count);
+ if (err)
+ printf("%s: Error processing USB node!\n",
+ __func__);
+ return err;
+ }
+ }
+ if (i == ARRAY_SIZE(fdt_usb_controllers))
+ controller = NULL;
+
+ return err;
+}
+
/**
* Start up the given port number (ports are numbered from 0 on each board).
* This returns values for the appropriate hccr and hcor addresses to use for
@@ -564,6 +782,20 @@
usbctlr = config->reg;
*hccr = (struct ehci_hccr *)&usbctlr->cap_length;
*hcor = (struct ehci_hcor *)&usbctlr->usb_cmd;
+
+ if (controller->has_hostpc) {
+ /* Set to Host mode after Controller Reset was done */
+ clrsetbits_le32(&usbctlr->usb_mode, USBMODE_CM_HC,
+ USBMODE_CM_HC);
+ /* Select UTMI parallel interface after setting host mode */
+ if (config->utmi) {
+ clrsetbits_le32((char *)&usbctlr->usb_cmd +
+ HOSTPC1_DEVLC, PTS_MASK,
+ PTS_UTMI << PTS_SHIFT);
+ clrbits_le32((char *)&usbctlr->usb_cmd +
+ HOSTPC1_DEVLC, STS);
+ }
+ }
return 0;
}
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index efd711d..2060a3e 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -42,7 +42,7 @@
while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB)
;
#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) || \
- defined(CONFIG_AT91SAM9X5)
+ defined(CONFIG_AT91SAM9X5) || defined(CONFIG_SAMA5D3)
/* Enable UPLL */
writel(readl(&pmc->uckr) | AT91_PMC_UPLLEN | AT91_PMC_BIASEN,
&pmc->uckr);
@@ -54,8 +54,13 @@
#endif
/* Enable USB host clock. */
+#ifdef CONFIG_SAMA5D3
+ writel(1 << (ATMEL_ID_UHP - 32), &pmc->pcer1);
+#else
writel(1 << ATMEL_ID_UHP, &pmc->pcer);
-#ifdef CONFIG_AT91SAM9261
+#endif
+
+#if defined(CONFIG_AT91SAM9261) || defined(CONFIG_AT91SAM9G10)
writel(ATMEL_PMC_UHP | AT91_PMC_HCK0, &pmc->scer);
#else
writel(ATMEL_PMC_UHP, &pmc->scer);
@@ -69,8 +74,13 @@
at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC;
/* Disable USB host clock. */
+#ifdef CONFIG_SAMA5D3
+ writel(1 << (ATMEL_ID_UHP - 32), &pmc->pcdr1);
+#else
writel(1 << ATMEL_ID_UHP, &pmc->pcdr);
-#ifdef CONFIG_AT91SAM9261
+#endif
+
+#if defined(CONFIG_AT91SAM9261) || defined(CONFIG_AT91SAM9G10)
writel(ATMEL_PMC_UHP | AT91_PMC_HCK0, &pmc->scdr);
#else
writel(ATMEL_PMC_UHP, &pmc->scdr);
@@ -83,7 +93,7 @@
while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != 0)
;
#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) || \
- defined(CONFIG_AT91SAM9X5)
+ defined(CONFIG_AT91SAM9X5) || defined(CONFIG_SAMA5D3)
/* Disable UPLL */
writel(readl(&pmc->uckr) & (~AT91_PMC_UPLLEN), &pmc->uckr);
while ((readl(&pmc->sr) & AT91_PMC_LOCKU) == AT91_PMC_LOCKU)
diff --git a/drivers/usb/musb/omap3.c b/drivers/usb/musb/omap3.c
index c7876ed..a395ebc 100644
--- a/drivers/usb/musb/omap3.c
+++ b/drivers/usb/musb/omap3.c
@@ -30,6 +30,7 @@
* MA 02111-1307 USA
*/
+#include <asm/omap_common.h>
#include <twl4030.h>
#include <twl6030.h>
#include "omap3.h"
@@ -135,7 +136,8 @@
#endif
#ifdef CONFIG_OMAP4430
- u32 *usbotghs_control = (u32 *)(CTRL_BASE + 0x33C);
+ u32 *usbotghs_control =
+ (u32 *)((*ctrl)->control_usbotghs_ctrl);
*usbotghs_control = 0x15;
#endif
platform_needs_initialization = 0;
diff --git a/drivers/usb/ulpi/omap-ulpi-viewport.c b/drivers/usb/ulpi/omap-ulpi-viewport.c
index 3c1ea1a..4db7fa4 100644
--- a/drivers/usb/ulpi/omap-ulpi-viewport.c
+++ b/drivers/usb/ulpi/omap-ulpi-viewport.c
@@ -22,18 +22,19 @@
#include <asm/io.h>
#include <usb/ulpi.h>
-#define OMAP_ULPI_WR_OPSEL (3 << 21)
-#define OMAP_ULPI_ACCESS (1 << 31)
+#define OMAP_ULPI_WR_OPSEL (2 << 22)
+#define OMAP_ULPI_RD_OPSEL (3 << 22)
+#define OMAP_ULPI_START (1 << 31)
/*
- * Wait for the ULPI Access to complete
+ * Wait for having ulpi in done state
*/
static int ulpi_wait(struct ulpi_viewport *ulpi_vp, u32 mask)
{
int timeout = CONFIG_USB_ULPI_TIMEOUT;
while (--timeout) {
- if ((readl(ulpi_vp->viewport_addr) & mask))
+ if (!(readl(ulpi_vp->viewport_addr) & mask))
return 0;
udelay(1);
@@ -43,40 +44,15 @@
}
/*
- * Wake the ULPI PHY up for communication
- *
- * returns 0 on success.
- */
-static int ulpi_wakeup(struct ulpi_viewport *ulpi_vp)
-{
- int err;
-
- if (readl(ulpi_vp->viewport_addr) & OMAP_ULPI_ACCESS)
- return 0; /* already awake */
-
- writel(OMAP_ULPI_ACCESS, ulpi_vp->viewport_addr);
-
- err = ulpi_wait(ulpi_vp, OMAP_ULPI_ACCESS);
- if (err)
- debug("ULPI wakeup timed out\n");
-
- return err;
-}
-
-/*
* Issue a ULPI read/write request
*/
static int ulpi_request(struct ulpi_viewport *ulpi_vp, u32 value)
{
int err;
- err = ulpi_wakeup(ulpi_vp);
- if (err)
- return err;
-
writel(value, ulpi_vp->viewport_addr);
- err = ulpi_wait(ulpi_vp, OMAP_ULPI_ACCESS);
+ err = ulpi_wait(ulpi_vp, OMAP_ULPI_START);
if (err)
debug("ULPI request timed out\n");
@@ -85,7 +61,7 @@
int ulpi_write(struct ulpi_viewport *ulpi_vp, u8 *reg, u32 value)
{
- u32 val = ((ulpi_vp->port_num & 0xf) << 24) |
+ u32 val = OMAP_ULPI_START | (((ulpi_vp->port_num + 1) & 0xf) << 24) |
OMAP_ULPI_WR_OPSEL | ((u32)reg << 16) | (value & 0xff);
return ulpi_request(ulpi_vp, val);
@@ -94,8 +70,8 @@
u32 ulpi_read(struct ulpi_viewport *ulpi_vp, u8 *reg)
{
int err;
- u32 val = ((ulpi_vp->port_num & 0xf) << 24) |
- OMAP_ULPI_WR_OPSEL | ((u32)reg << 16);
+ u32 val = OMAP_ULPI_START | (((ulpi_vp->port_num + 1) & 0xf) << 24) |
+ OMAP_ULPI_RD_OPSEL | ((u32)reg << 16);
err = ulpi_request(ulpi_vp, val);
if (err)
diff --git a/drivers/video/exynos_fb.c b/drivers/video/exynos_fb.c
index ed0823b..c3606d5 100644
--- a/drivers/video/exynos_fb.c
+++ b/drivers/video/exynos_fb.c
@@ -319,10 +319,10 @@
#ifdef CONFIG_OF_CONTROL
if (exynos_fimd_parse_dt(gd->fdt_blob))
debug("Can't get proper panel info\n");
-#endif
+#else
/* initialize parameters which is specific to panel. */
init_panel_info(&panel_info);
-
+#endif
panel_width = panel_info.vl_width;
panel_height = panel_info.vl_height;
diff --git a/drivers/video/exynos_fimd.c b/drivers/video/exynos_fimd.c
index 3359949..7243ea3 100644
--- a/drivers/video/exynos_fimd.c
+++ b/drivers/video/exynos_fimd.c
@@ -280,8 +280,9 @@
node, "reg");
if (fimd_ctrl == NULL)
debug("Can't get the FIMD base address\n");
-#endif
+#else
fimd_ctrl = (struct exynos_fb *)samsung_get_base_fimd();
+#endif
offset = exynos_fimd_get_base_offset();
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index e96acab..b9bbbc6 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -33,6 +33,7 @@
COBJS-$(CONFIG_TNETV107X_WATCHDOG) += tnetv107x_wdt.o
COBJS-$(CONFIG_S5P) += s5p_wdt.o
COBJS-$(CONFIG_XILINX_TB_WATCHDOG) += xilinx_tb_wdt.o
+COBJS-$(CONFIG_BFIN_WATCHDOG) += bfin_wdt.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
diff --git a/arch/blackfin/cpu/watchdog.c b/drivers/watchdog/bfin_wdt.c
similarity index 64%
rename from arch/blackfin/cpu/watchdog.c
rename to drivers/watchdog/bfin_wdt.c
index 1886bda..7a6756b 100644
--- a/arch/blackfin/cpu/watchdog.c
+++ b/drivers/watchdog/bfin_wdt.c
@@ -9,6 +9,7 @@
#include <common.h>
#include <watchdog.h>
#include <asm/blackfin.h>
+#include <asm/mach-common/bits/watchdog.h>
void hw_watchdog_reset(void)
{
@@ -17,7 +18,9 @@
void hw_watchdog_init(void)
{
- bfin_write_WDOG_CNT(5 * get_sclk()); /* 5 second timeout */
+ bfin_write_WDOG_CTL(WDDIS);
+ SSYNC();
+ bfin_write_WDOG_CNT(CONFIG_WATCHDOG_TIMEOUT_MSECS / 1000 * get_sclk());
hw_watchdog_reset();
- bfin_write_WDOG_CTL(0x0);
+ bfin_write_WDOG_CTL(WDEN);
}
diff --git a/fs/ext4/dev.c b/fs/ext4/dev.c
index 464a67d..81b7633 100644
--- a/fs/ext4/dev.c
+++ b/fs/ext4/dev.c
@@ -40,6 +40,7 @@
#include <config.h>
#include <ext4fs.h>
#include <ext_common.h>
+#include "ext4_common.h"
unsigned long part_offset;
@@ -48,37 +49,41 @@
void ext4fs_set_blk_dev(block_dev_desc_t *rbdd, disk_partition_t *info)
{
+ assert(rbdd->blksz == (1 << rbdd->log2blksz));
ext4fs_block_dev_desc = rbdd;
+ get_fs()->dev_desc = rbdd;
part_info = info;
part_offset = info->start;
- get_fs()->total_sect = (info->size * info->blksz) / SECTOR_SIZE;
- get_fs()->dev_desc = rbdd;
+ get_fs()->total_sect = (info->size * info->blksz) >>
+ get_fs()->dev_desc->log2blksz;
}
int ext4fs_devread(int sector, int byte_offset, int byte_len, char *buf)
{
- ALLOC_CACHE_ALIGN_BUFFER(char, sec_buf, SECTOR_SIZE);
unsigned block_len;
+ int log2blksz = ext4fs_block_dev_desc->log2blksz;
+ ALLOC_CACHE_ALIGN_BUFFER(char, sec_buf, (ext4fs_block_dev_desc ?
+ ext4fs_block_dev_desc->blksz :
+ 0));
+ if (ext4fs_block_dev_desc == NULL) {
+ printf("** Invalid Block Device Descriptor (NULL)\n");
+ return 0;
+ }
/* Check partition boundaries */
- if ((sector < 0)
- || ((sector + ((byte_offset + byte_len - 1) >> SECTOR_BITS)) >=
- part_info->size)) {
+ if ((sector < 0) ||
+ ((sector + ((byte_offset + byte_len - 1) >> log2blksz))
+ >= part_info->size)) {
printf("%s read outside partition %d\n", __func__, sector);
return 0;
}
/* Get the read to the beginning of a partition */
- sector += byte_offset >> SECTOR_BITS;
- byte_offset &= SECTOR_SIZE - 1;
+ sector += byte_offset >> log2blksz;
+ byte_offset &= ext4fs_block_dev_desc->blksz - 1;
debug(" <%d, %d, %d>\n", sector, byte_offset, byte_len);
- if (ext4fs_block_dev_desc == NULL) {
- printf("** Invalid Block Device Descriptor (NULL)\n");
- return 0;
- }
-
if (byte_offset != 0) {
/* read first part which isn't aligned with start of sector */
if (ext4fs_block_dev_desc->
@@ -89,9 +94,12 @@
return 0;
}
memcpy(buf, sec_buf + byte_offset,
- min(SECTOR_SIZE - byte_offset, byte_len));
- buf += min(SECTOR_SIZE - byte_offset, byte_len);
- byte_len -= min(SECTOR_SIZE - byte_offset, byte_len);
+ min(ext4fs_block_dev_desc->blksz
+ - byte_offset, byte_len));
+ buf += min(ext4fs_block_dev_desc->blksz
+ - byte_offset, byte_len);
+ byte_len -= min(ext4fs_block_dev_desc->blksz
+ - byte_offset, byte_len);
sector++;
}
@@ -99,12 +107,12 @@
return 1;
/* read sector aligned part */
- block_len = byte_len & ~(SECTOR_SIZE - 1);
+ block_len = byte_len & ~(ext4fs_block_dev_desc->blksz - 1);
if (block_len == 0) {
- ALLOC_CACHE_ALIGN_BUFFER(u8, p, SECTOR_SIZE);
+ ALLOC_CACHE_ALIGN_BUFFER(u8, p, ext4fs_block_dev_desc->blksz);
- block_len = SECTOR_SIZE;
+ block_len = ext4fs_block_dev_desc->blksz;
ext4fs_block_dev_desc->block_read(ext4fs_block_dev_desc->dev,
part_info->start + sector,
1, (unsigned long *)p);
@@ -114,16 +122,16 @@
if (ext4fs_block_dev_desc->block_read(ext4fs_block_dev_desc->dev,
part_info->start + sector,
- block_len / SECTOR_SIZE,
+ block_len >> log2blksz,
(unsigned long *) buf) !=
- block_len / SECTOR_SIZE) {
+ block_len >> log2blksz) {
printf(" ** %s read error - block\n", __func__);
return 0;
}
- block_len = byte_len & ~(SECTOR_SIZE - 1);
+ block_len = byte_len & ~(ext4fs_block_dev_desc->blksz - 1);
buf += block_len;
byte_len -= block_len;
- sector += block_len / SECTOR_SIZE;
+ sector += block_len / ext4fs_block_dev_desc->blksz;
if (byte_len != 0) {
/* read rest of data which are not in whole sector */
@@ -138,3 +146,13 @@
}
return 1;
}
+
+int ext4_read_superblock(char *buffer)
+{
+ struct ext_filesystem *fs = get_fs();
+ int sect = SUPERBLOCK_START >> fs->dev_desc->log2blksz;
+ int off = SUPERBLOCK_START % fs->dev_desc->blksz;
+
+ return ext4fs_devread(sect, off, SUPERBLOCK_SIZE,
+ buffer);
+}
diff --git a/fs/ext4/ext4_common.c b/fs/ext4/ext4_common.c
index f12b805..58880b4 100644
--- a/fs/ext4/ext4_common.c
+++ b/fs/ext4/ext4_common.c
@@ -71,18 +71,18 @@
uint64_t startblock;
uint64_t remainder;
unsigned char *temp_ptr = NULL;
- ALLOC_CACHE_ALIGN_BUFFER(unsigned char, sec_buf, SECTOR_SIZE);
struct ext_filesystem *fs = get_fs();
+ int log2blksz = fs->dev_desc->log2blksz;
+ ALLOC_CACHE_ALIGN_BUFFER(unsigned char, sec_buf, fs->dev_desc->blksz);
- startblock = off / (uint64_t)SECTOR_SIZE;
+ startblock = off >> log2blksz;
startblock += part_offset;
- remainder = off % (uint64_t)SECTOR_SIZE;
- remainder &= SECTOR_SIZE - 1;
+ remainder = off & (uint64_t)(fs->dev_desc->blksz - 1);
if (fs->dev_desc == NULL)
return;
- if ((startblock + (size / SECTOR_SIZE)) >
+ if ((startblock + (size >> log2blksz)) >
(part_offset + fs->total_sect)) {
printf("part_offset is %lu\n", part_offset);
printf("total_sector is %llu\n", fs->total_sect);
@@ -101,10 +101,10 @@
startblock, 1, sec_buf);
}
} else {
- if (size / SECTOR_SIZE != 0) {
+ if (size >> log2blksz != 0) {
fs->dev_desc->block_write(fs->dev_desc->dev,
startblock,
- size / SECTOR_SIZE,
+ size >> log2blksz,
(unsigned long *)buf);
} else {
fs->dev_desc->block_read(fs->dev_desc->dev,
@@ -1459,6 +1459,7 @@
{
long int blkno;
unsigned int blkoff, desc_per_blk;
+ int log2blksz = get_fs()->dev_desc->log2blksz;
desc_per_blk = EXT2_BLOCK_SIZE(data) / sizeof(struct ext2_block_group);
@@ -1469,7 +1470,7 @@
debug("ext4fs read %d group descriptor (blkno %ld blkoff %u)\n",
group, blkno, blkoff);
- return ext4fs_devread(blkno << LOG2_EXT2_BLOCK_SIZE(data),
+ return ext4fs_devread(blkno << (LOG2_BLOCK_SIZE(data) - log2blksz),
blkoff, sizeof(struct ext2_block_group),
(char *)blkgrp);
}
@@ -1479,6 +1480,7 @@
struct ext2_block_group blkgrp;
struct ext2_sblock *sblock = &data->sblock;
struct ext_filesystem *fs = get_fs();
+ int log2blksz = get_fs()->dev_desc->log2blksz;
int inodes_per_block, status;
long int blkno;
unsigned int blkoff;
@@ -1495,7 +1497,8 @@
(ino % __le32_to_cpu(sblock->inodes_per_group)) / inodes_per_block;
blkoff = (ino % inodes_per_block) * fs->inodesz;
/* Read the inode. */
- status = ext4fs_devread(blkno << LOG2_EXT2_BLOCK_SIZE(data), blkoff,
+ status = ext4fs_devread(blkno << (LOG2_BLOCK_SIZE(data) - log2blksz),
+ blkoff,
sizeof(struct ext2_inode), (char *)inode);
if (status == 0)
return 0;
@@ -1515,7 +1518,9 @@
unsigned long long start;
/* get the blocksize of the filesystem */
blksz = EXT2_BLOCK_SIZE(ext4fs_root);
- log2_blksz = LOG2_EXT2_BLOCK_SIZE(ext4fs_root);
+ log2_blksz = LOG2_BLOCK_SIZE(ext4fs_root)
+ - get_fs()->dev_desc->log2blksz;
+
if (le32_to_cpu(inode->flags) & EXT4_EXTENTS_FL) {
char *buf = zalloc(blksz);
if (!buf)
@@ -1523,11 +1528,11 @@
struct ext4_extent_header *ext_block;
struct ext4_extent *extent;
int i = -1;
- ext_block = ext4fs_get_extent_block(ext4fs_root, buf,
- (struct ext4_extent_header
- *)inode->b.
- blocks.dir_blocks,
- fileblock, log2_blksz);
+ ext_block =
+ ext4fs_get_extent_block(ext4fs_root, buf,
+ (struct ext4_extent_header *)
+ inode->b.blocks.dir_blocks,
+ fileblock, log2_blksz);
if (!ext_block) {
printf("invalid extent block\n");
free(buf);
@@ -1839,7 +1844,7 @@
blknr = __le32_to_cpu(ext4fs_indir3_block
[rblock % perblock_child]);
}
- debug("ext4fs_read_block %ld\n", blknr);
+ debug("read_allocated_block %ld\n", blknr);
return blknr;
}
@@ -2193,13 +2198,12 @@
struct ext2_data *data;
int status;
struct ext_filesystem *fs = get_fs();
- data = zalloc(sizeof(struct ext2_data));
+ data = zalloc(SUPERBLOCK_SIZE);
if (!data)
return 0;
/* Read the superblock. */
- status = ext4fs_devread(1 * 2, 0, sizeof(struct ext2_sblock),
- (char *)&data->sblock);
+ status = ext4_read_superblock((char *)&data->sblock);
if (status == 0)
goto fail;
diff --git a/fs/ext4/ext4_common.h b/fs/ext4/ext4_common.h
index 72cd020..6571df6 100644
--- a/fs/ext4/ext4_common.h
+++ b/fs/ext4/ext4_common.h
@@ -49,7 +49,7 @@
#define S_IFLNK 0120000 /* symbolic link */
#define BLOCK_NO_ONE 1
-#define SUPERBLOCK_SECTOR 2
+#define SUPERBLOCK_START (2 * 512)
#define SUPERBLOCK_SIZE 1024
#define F_FILE 1
diff --git a/fs/ext4/ext4_journal.c b/fs/ext4/ext4_journal.c
index ba4a7bb..81aa5fc 100644
--- a/fs/ext4/ext4_journal.c
+++ b/fs/ext4/ext4_journal.c
@@ -534,16 +534,14 @@
jsb->s_start = cpu_to_be32(1);
jsb->s_sequence = cpu_to_be32(be32_to_cpu(jsb->s_sequence) + 1);
/* get the superblock */
- ext4fs_devread(SUPERBLOCK_SECTOR, 0, SUPERBLOCK_SIZE,
- (char *)fs->sb);
+ ext4_read_superblock((char *)fs->sb);
fs->sb->feature_incompat |= EXT3_FEATURE_INCOMPAT_RECOVER;
/* Update the super block */
put_ext4((uint64_t) (SUPERBLOCK_SIZE),
(struct ext2_sblock *)fs->sb,
(uint32_t) SUPERBLOCK_SIZE);
- ext4fs_devread(SUPERBLOCK_SECTOR, 0, SUPERBLOCK_SIZE,
- (char *)fs->sb);
+ ext4_read_superblock((char *)fs->sb);
blknr = read_allocated_block(&inode_journal,
EXT2_JOURNAL_SUPERBLOCK);
diff --git a/fs/ext4/ext4_write.c b/fs/ext4/ext4_write.c
index c4e399c..0c1f62b 100644
--- a/fs/ext4/ext4_write.c
+++ b/fs/ext4/ext4_write.c
@@ -614,14 +614,13 @@
/* populate fs */
fs->blksz = EXT2_BLOCK_SIZE(ext4fs_root);
fs->inodesz = INODE_SIZE_FILESYSTEM(ext4fs_root);
- fs->sect_perblk = fs->blksz / SECTOR_SIZE;
+ fs->sect_perblk = fs->blksz >> fs->dev_desc->log2blksz;
/* get the superblock */
fs->sb = zalloc(SUPERBLOCK_SIZE);
if (!fs->sb)
return -ENOMEM;
- if (!ext4fs_devread(SUPERBLOCK_SECTOR, 0, SUPERBLOCK_SIZE,
- (char *)fs->sb))
+ if (!ext4_read_superblock((char *)fs->sb))
goto fail;
/* init journal */
@@ -722,7 +721,7 @@
ext4fs_free_journal();
/* get the superblock */
- ext4fs_devread(SUPERBLOCK_SECTOR, 0, SUPERBLOCK_SIZE, (char *)fs->sb);
+ ext4_read_superblock((char *)fs->sb);
fs->sb->feature_incompat &= ~EXT3_FEATURE_INCOMPAT_RECOVER;
put_ext4((uint64_t)(SUPERBLOCK_SIZE),
(struct ext2_sblock *)fs->sb, (uint32_t)SUPERBLOCK_SIZE);
@@ -766,9 +765,10 @@
{
int i;
int blockcnt;
- int log2blocksize = LOG2_EXT2_BLOCK_SIZE(ext4fs_root);
unsigned int filesize = __le32_to_cpu(file_inode->size);
struct ext_filesystem *fs = get_fs();
+ int log2blksz = fs->dev_desc->log2blksz;
+ int log2_fs_blocksize = LOG2_BLOCK_SIZE(ext4fs_root) - log2blksz;
int previous_block_number = -1;
int delayed_start = 0;
int delayed_extent = 0;
@@ -789,16 +789,16 @@
if (blknr < 0)
return -1;
- blknr = blknr << log2blocksize;
+ blknr = blknr << log2_fs_blocksize;
if (blknr) {
if (previous_block_number != -1) {
if (delayed_next == blknr) {
delayed_extent += blockend;
- delayed_next += blockend >> SECTOR_BITS;
+ delayed_next += blockend >> log2blksz;
} else { /* spill */
- put_ext4((uint64_t) (delayed_start *
- SECTOR_SIZE),
+ put_ext4((uint64_t)
+ (delayed_start << log2blksz),
delayed_buf,
(uint32_t) delayed_extent);
previous_block_number = blknr;
@@ -806,7 +806,7 @@
delayed_extent = blockend;
delayed_buf = buf;
delayed_next = blknr +
- (blockend >> SECTOR_BITS);
+ (blockend >> log2blksz);
}
} else {
previous_block_number = blknr;
@@ -814,13 +814,14 @@
delayed_extent = blockend;
delayed_buf = buf;
delayed_next = blknr +
- (blockend >> SECTOR_BITS);
+ (blockend >> log2blksz);
}
} else {
if (previous_block_number != -1) {
/* spill */
- put_ext4((uint64_t) (delayed_start *
- SECTOR_SIZE), delayed_buf,
+ put_ext4((uint64_t) (delayed_start <<
+ log2blksz),
+ delayed_buf,
(uint32_t) delayed_extent);
previous_block_number = -1;
}
@@ -830,7 +831,7 @@
}
if (previous_block_number != -1) {
/* spill */
- put_ext4((uint64_t) (delayed_start * SECTOR_SIZE),
+ put_ext4((uint64_t) (delayed_start << log2blksz),
delayed_buf, (uint32_t) delayed_extent);
previous_block_number = -1;
}
@@ -921,7 +922,8 @@
/* Allocate data blocks */
ext4fs_allocate_blocks(file_inode, blocks_remaining,
&blks_reqd_for_file);
- file_inode->blockcnt = (blks_reqd_for_file * fs->blksz) / SECTOR_SIZE;
+ file_inode->blockcnt = (blks_reqd_for_file * fs->blksz) >>
+ fs->dev_desc->log2blksz;
temp_ptr = zalloc(fs->blksz);
if (!temp_ptr)
diff --git a/fs/ext4/ext4fs.c b/fs/ext4/ext4fs.c
index 4dddde2..1954afb 100644
--- a/fs/ext4/ext4fs.c
+++ b/fs/ext4/ext4fs.c
@@ -60,10 +60,12 @@
int ext4fs_read_file(struct ext2fs_node *node, int pos,
unsigned int len, char *buf)
{
+ struct ext_filesystem *fs = get_fs();
int i;
int blockcnt;
- int log2blocksize = LOG2_EXT2_BLOCK_SIZE(node->data);
- int blocksize = 1 << (log2blocksize + DISK_SECTOR_BITS);
+ int log2blksz = fs->dev_desc->log2blksz;
+ int log2_fs_blocksize = LOG2_BLOCK_SIZE(node->data) - log2blksz;
+ int blocksize = (1 << (log2_fs_blocksize + log2blksz));
unsigned int filesize = __le32_to_cpu(node->inode.size);
int previous_block_number = -1;
int delayed_start = 0;
@@ -88,7 +90,7 @@
if (blknr < 0)
return -1;
- blknr = blknr << log2blocksize;
+ blknr = blknr << log2_fs_blocksize;
/* Last block. */
if (i == blockcnt - 1) {
@@ -110,7 +112,7 @@
if (previous_block_number != -1) {
if (delayed_next == blknr) {
delayed_extent += blockend;
- delayed_next += blockend >> SECTOR_BITS;
+ delayed_next += blockend >> log2blksz;
} else { /* spill */
status = ext4fs_devread(delayed_start,
delayed_skipfirst,
@@ -124,7 +126,7 @@
delayed_skipfirst = skipfirst;
delayed_buf = buf;
delayed_next = blknr +
- (blockend >> SECTOR_BITS);
+ (blockend >> log2blksz);
}
} else {
previous_block_number = blknr;
@@ -133,7 +135,7 @@
delayed_skipfirst = skipfirst;
delayed_buf = buf;
delayed_next = blknr +
- (blockend >> SECTOR_BITS);
+ (blockend >> log2blksz);
}
} else {
if (previous_block_number != -1) {
diff --git a/include/asm-generic/sections.h b/include/asm-generic/sections.h
index 4b39844..3e32eee 100644
--- a/include/asm-generic/sections.h
+++ b/include/asm-generic/sections.h
@@ -90,9 +90,6 @@
extern ulong _rel_dyn_start_ofs;
extern ulong _rel_dyn_end_ofs;
-/* Start/end of the relocation symbol table, as an offset from _start */
-extern ulong _dynsym_start_ofs;
-
/* End of the region to be relocated, as an offset form _start */
extern ulong _image_copy_end_ofs;
diff --git a/include/asm-generic/u-boot.h b/include/asm-generic/u-boot.h
index a9aa8ba..a4bfdac 100644
--- a/include/asm-generic/u-boot.h
+++ b/include/asm-generic/u-boot.h
@@ -61,14 +61,6 @@
#if defined(CONFIG_MPC83xx)
unsigned long bi_immrbar;
#endif
-#if defined(CONFIG_MPC8220)
- unsigned long bi_mbar_base; /* base of internal registers */
- unsigned long bi_inpfreq; /* Input Freq, In MHz */
- unsigned long bi_pcifreq; /* PCI Freq, in MHz */
- unsigned long bi_pevfreq; /* PEV Freq, in MHz */
- unsigned long bi_flbfreq; /* Flexbus Freq, in MHz */
- unsigned long bi_vcofreq; /* VCO Freq, in MHz */
-#endif
unsigned long bi_bootflags; /* boot / reboot flag (Unused) */
unsigned long bi_ip_addr; /* IP Address */
unsigned char bi_enetaddr[6]; /* OLD: see README.enetaddr */
diff --git a/include/atmel_mci.h b/include/atmel_mci.h
index c711881..31c4569 100644
--- a/include/atmel_mci.h
+++ b/include/atmel_mci.h
@@ -52,6 +52,8 @@
u32 ier; /* 0x44 */
u32 idr; /* 0x48 */
u32 imr; /* 0x4c */
+ u32 reserved[43];
+ u32 version;
} atmel_mci_t;
#endif /* __ASSEMBLY__ */
diff --git a/include/bootstage.h b/include/bootstage.h
index 3b2216b..6dc0422 100644
--- a/include/bootstage.h
+++ b/include/bootstage.h
@@ -221,7 +221,7 @@
*/
ulong timer_get_boot_us(void);
-#ifndef CONFIG_SPL_BUILD
+#if !defined(CONFIG_SPL_BUILD) && !defined(USE_HOSTCC)
/*
* Board code can implement show_boot_progress() if needed.
*
@@ -233,10 +233,21 @@
#define show_boot_progress(val) do {} while (0)
#endif
-#if defined(CONFIG_BOOTSTAGE) && !defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_BOOTSTAGE) && !defined(CONFIG_SPL_BUILD) && \
+ !defined(USE_HOSTCC)
/* This is the full bootstage implementation */
/**
+ * Relocate existing bootstage records
+ *
+ * Call this after relocation has happened and after malloc has been initted.
+ * We need to copy any pointers in bootstage records that were added pre-
+ * relocation, since memory can be overritten later.
+ * @return Always returns 0, to indicate success
+ */
+int bootstage_relocate(void);
+
+/**
* Add a new bootstage record
*
* @param id Bootstage ID to use (ignored if flags & BOOTSTAGEF_ALLOC)
@@ -257,6 +268,19 @@
ulong bootstage_mark_name(enum bootstage_id id, const char *name);
/**
+ * Mark a time stamp in the given function and line number
+ *
+ * See BOOTSTAGE_MARKER() for a convenient macro.
+ *
+ * @param file Filename to record (NULL if none)
+ * @param func Function name to record
+ * @param linenum Line number to record
+ * @return recorded time stamp
+ */
+ulong bootstage_mark_code(const char *file, const char *func,
+ int linenum);
+
+/**
* Mark the start of a bootstage activity. The end will be marked later with
* bootstage_accum() and at that point we accumulate the time taken. Calling
* this function turns the given id into a accumulator rather than and
@@ -315,11 +339,22 @@
int bootstage_unstash(void *base, int size);
#else
+static inline ulong bootstage_add_record(enum bootstage_id id,
+ const char *name, int flags, ulong mark)
+{
+ return 0;
+}
+
/*
* This is a dummy implementation which just calls show_boot_progress(),
* and won't even do that unless CONFIG_SHOW_BOOT_PROGRESS is defined
*/
+static inline int bootstage_relocate(void)
+{
+ return 0;
+}
+
static inline ulong bootstage_mark(enum bootstage_id id)
{
show_boot_progress(id);
@@ -337,6 +372,22 @@
return 0;
}
+static inline ulong bootstage_mark_code(const char *file, const char *func,
+ int linenum)
+{
+ return 0;
+}
+
+static inline uint32_t bootstage_start(enum bootstage_id id, const char *name)
+{
+ return 0;
+}
+
+static inline uint32_t bootstage_accum(enum bootstage_id id)
+{
+ return 0;
+}
+
static inline int bootstage_stash(void *base, int size)
{
return 0; /* Pretend to succeed */
@@ -348,4 +399,8 @@
}
#endif /* CONFIG_BOOTSTAGE */
+/* Helper macro for adding a bootstage to a line of code */
+#define BOOTSTAGE_MARKER() \
+ bootstage_mark_code(__FILE__, __func__, __LINE__)
+
#endif
diff --git a/include/common.h b/include/common.h
index 8a1f3e4..e682bd8 100644
--- a/include/common.h
+++ b/include/common.h
@@ -71,8 +71,6 @@
#include <mpc5xxx.h>
#elif defined(CONFIG_MPC512X)
#include <asm/immap_512x.h>
-#elif defined(CONFIG_MPC8220)
-#include <asm/immap_8220.h>
#elif defined(CONFIG_8260)
#if defined(CONFIG_MPC8247) \
|| defined(CONFIG_MPC8248) \
@@ -199,18 +197,35 @@
* General Purpose Utilities
*/
#define min(X, Y) \
- ({ typeof (X) __x = (X); \
- typeof (Y) __y = (Y); \
+ ({ typeof(X) __x = (X); \
+ typeof(Y) __y = (Y); \
(__x < __y) ? __x : __y; })
#define max(X, Y) \
- ({ typeof (X) __x = (X); \
- typeof (Y) __y = (Y); \
+ ({ typeof(X) __x = (X); \
+ typeof(Y) __y = (Y); \
(__x > __y) ? __x : __y; })
#define MIN(x, y) min(x, y)
#define MAX(x, y) max(x, y)
+#define min3(X, Y, Z) \
+ ({ typeof(X) __x = (X); \
+ typeof(Y) __y = (Y); \
+ typeof(Z) __z = (Z); \
+ __x < __y ? (__x < __z ? __x : __z) : \
+ (__y < __z ? __y : __z); })
+
+#define max3(X, Y, Z) \
+ ({ typeof(X) __x = (X); \
+ typeof(Y) __y = (Y); \
+ typeof(Z) __z = (Z); \
+ __x > __y ? (__x > __z ? __x : __z) : \
+ (__y > __z ? __y : __z); })
+
+#define MIN3(x, y, z) min3(x, y, z)
+#define MAX3(x, y, z) max3(x, y, z)
+
/*
* Return the absolute value of a number.
*
@@ -323,6 +338,16 @@
*/
void board_show_dram(ulong size);
+/**
+ * arch_fixup_memory_node() - Write arch-specific memory information to fdt
+ *
+ * Defined in arch/$(ARCH)/lib/bootm.c
+ *
+ * @blob: FDT blob to write to
+ * @return 0 if ok, or -ve FDT_ERR_... on failure
+ */
+int arch_fixup_memory_node(void *blob);
+
/* common/flash.c */
void flash_perror (int);
@@ -556,7 +581,6 @@
defined (CONFIG_74x) || \
defined (CONFIG_75x) || \
defined (CONFIG_74xx) || \
- defined (CONFIG_MPC8220) || \
defined (CONFIG_MPC85xx) || \
defined (CONFIG_MPC86xx) || \
defined (CONFIG_MPC83xx)
@@ -648,9 +672,6 @@
#elif defined(CONFIG_MPC5xxx)
int prt_mpc5xxx_clks (void);
#endif
-#if defined(CONFIG_MPC8220)
-int prt_mpc8220_clks (void);
-#endif
#ifdef CONFIG_4xx
ulong get_OPB_freq (void);
ulong get_PCI_freq (void);
diff --git a/include/configs/Alaska8220.h b/include/configs/Alaska8220.h
deleted file mode 100644
index 39c29ec..0000000
--- a/include/configs/Alaska8220.h
+++ /dev/null
@@ -1,334 +0,0 @@
-/*
- * (C) Copyright 2004
- * TsiChung Liew, Freescale Software Engineering, Tsi-Chung.Liew@freescale.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_MPC8220 1
-#define CONFIG_ALASKA8220 1 /* ... on Alaska board */
-
-#define CONFIG_SYS_TEXT_BASE 0xfff00000
-
-#define CONFIG_BAT_RW 1 /* Use common BAT rw code */
-#define CONFIG_HIGH_BATS 1 /* High BATs supported */
-
-/* Input clock running at 30Mhz, read Hid1 for the CPU multiplier to
- determine the CPU speed. */
-#define CONFIG_SYS_MPC8220_CLKIN 30000000/* ... running at 30MHz */
-#define CONFIG_SYS_MPC8220_SYSPLL_VCO_MULTIPLIER 16 /* VCO multiplier can't be read from any register */
-
-/*
- * Serial console configuration
- */
-
-/* Define this for PSC console
-#define CONFIG_PSC_CONSOLE 1
-*/
-
-#define CONFIG_EXTUART_CONSOLE 1
-
-#ifdef CONFIG_EXTUART_CONSOLE
-# define CONFIG_CONS_INDEX 1
-# define CONFIG_SYS_NS16550_SERIAL
-# define CONFIG_SYS_NS16550
-# define CONFIG_SYS_NS16550_REG_SIZE 1
-# define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CPLD_BASE + 0x1008)
-# define CONFIG_SYS_NS16550_CLK 18432000
-#endif
-
-#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
-
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
-
-#define CONFIG_TIMESTAMP /* Print image info with timestamp */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_BOOTD
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_SNTP
-
-
-#define CONFIG_MII
-
-/*
- * Autobooting
- */
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#define CONFIG_BOOTARGS "root=/dev/ram rw"
-#define CONFIG_ETHADDR 00:e0:0c:bc:e0:60
-#define CONFIG_HAS_ETH1
-#define CONFIG_ETH1ADDR 00:e0:0c:bc:e0:61
-#define CONFIG_IPADDR 192.162.1.2
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_SERVERIP 192.162.1.1
-#define CONFIG_GATEWAYIP 192.162.1.1
-#define CONFIG_HOSTNAME Alaska
-#define CONFIG_OVERWRITE_ETHADDR_ONCE
-
-
-/*
- * I2C configuration
- */
-#define CONFIG_HARD_I2C 1
-#define CONFIG_SYS_I2C_MODULE 1
-
-#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */
-#define CONFIG_SYS_I2C_SLAVE 0x7F
-
-/*
- * EEPROM configuration
- */
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 /* 1011000xb */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 70
-/*
-#define CONFIG_ENV_IS_IN_EEPROM 1
-#define CONFIG_ENV_OFFSET 0
-#define CONFIG_ENV_SIZE 256
-*/
-
-/* If CONFIG_SYS_AMD_BOOT is defined, the the system will boot from AMD.
- else undefined it will boot from Intel Strata flash */
-#define CONFIG_SYS_AMD_BOOT 1
-
-/*
- * Flexbus Chipselect configuration
- */
-#if defined (CONFIG_SYS_AMD_BOOT)
-#define CONFIG_SYS_CS0_BASE 0xfff0
-#define CONFIG_SYS_CS0_MASK 0x00080000 /* 512 KB */
-#define CONFIG_SYS_CS0_CTRL 0x003f0d40
-
-#define CONFIG_SYS_CS1_BASE 0xfe00
-#define CONFIG_SYS_CS1_MASK 0x01000000 /* 16 MB */
-#define CONFIG_SYS_CS1_CTRL 0x003f1540
-#else
-#define CONFIG_SYS_CS0_BASE 0xff00
-#define CONFIG_SYS_CS0_MASK 0x01000000 /* 16 MB */
-#define CONFIG_SYS_CS0_CTRL 0x003f1540
-
-#define CONFIG_SYS_CS1_BASE 0xfe08
-#define CONFIG_SYS_CS1_MASK 0x00080000 /* 512 KB */
-#define CONFIG_SYS_CS1_CTRL 0x003f0d40
-#endif
-
-#define CONFIG_SYS_CS2_BASE 0xf100
-#define CONFIG_SYS_CS2_MASK 0x00040000
-#define CONFIG_SYS_CS2_CTRL 0x003f1140
-
-#define CONFIG_SYS_CS3_BASE 0xf200
-#define CONFIG_SYS_CS3_MASK 0x00040000
-#define CONFIG_SYS_CS3_CTRL 0x003f1100
-
-
-#define CONFIG_SYS_FLASH0_BASE (CONFIG_SYS_CS0_BASE << 16)
-#define CONFIG_SYS_FLASH1_BASE (CONFIG_SYS_CS1_BASE << 16)
-
-#if defined (CONFIG_SYS_AMD_BOOT)
-#define CONFIG_SYS_AMD_BASE CONFIG_SYS_FLASH0_BASE
-#define CONFIG_SYS_INTEL_BASE CONFIG_SYS_FLASH1_BASE + 0xf00000
-#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_AMD_BASE
-#else
-#define CONFIG_SYS_INTEL_BASE CONFIG_SYS_FLASH0_BASE + 0xf00000
-#define CONFIG_SYS_AMD_BASE CONFIG_SYS_FLASH1_BASE
-#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_INTEL_BASE
-#endif
-
-#define CONFIG_SYS_CPLD_BASE (CONFIG_SYS_CS2_BASE << 16)
-#define CONFIG_SYS_FPGA_BASE (CONFIG_SYS_CS3_BASE << 16)
-
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 4 /* max num of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max num of sects on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
-#define CONFIG_SYS_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */
-#define CONFIG_SYS_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */
-#define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
-
-#define PHYS_AMD_SECT_SIZE 0x00010000 /* 64 KB sectors (x2) */
-#define PHYS_INTEL_SECT_SIZE 0x00020000 /* 128 KB sectors (x2) */
-
-#define CONFIG_SYS_FLASH_CHECKSUM
-/*
- * Environment settings
- */
-#define CONFIG_ENV_IS_IN_FLASH 1
-#if defined (CONFIG_SYS_AMD_BOOT)
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH0_BASE + CONFIG_SYS_CS0_MASK - PHYS_AMD_SECT_SIZE)
-#define CONFIG_ENV_SIZE PHYS_AMD_SECT_SIZE
-#define CONFIG_ENV_SECT_SIZE PHYS_AMD_SECT_SIZE
-#define CONFIG_ENV1_ADDR (CONFIG_SYS_FLASH1_BASE + CONFIG_SYS_CS1_MASK - PHYS_INTEL_SECT_SIZE)
-#define CONFIG_ENV1_SIZE PHYS_INTEL_SECT_SIZE
-#define CONFIG_ENV1_SECT_SIZE PHYS_INTEL_SECT_SIZE
-#else
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH0_BASE + CONFIG_SYS_CS0_MASK - PHYS_INTEL_SECT_SIZE)
-#define CONFIG_ENV_SIZE PHYS_INTEL_SECT_SIZE
-#define CONFIG_ENV_SECT_SIZE PHYS_INTEL_SECT_SIZE
-#define CONFIG_ENV1_ADDR (CONFIG_SYS_FLASH1_BASE + CONFIG_SYS_CS1_MASK - PHYS_AMD_SECT_SIZE)
-#define CONFIG_ENV1_SIZE PHYS_AMD_SECT_SIZE
-#define CONFIG_ENV1_SECT_SIZE PHYS_AMD_SECT_SIZE
-#endif
-
-#define CONFIG_ENV_OVERWRITE 1
-
-#if defined CONFIG_ENV_IS_IN_FLASH
-#undef CONFIG_ENV_IS_IN_NVRAM
-#undef CONFIG_ENV_IS_IN_EEPROM
-#elif defined CONFIG_ENV_IS_IN_NVRAM
-#undef CONFIG_ENV_IS_IN_FLASH
-#undef CONFIG_ENV_IS_IN_EEPROM
-#elif defined CONFIG_ENV_IS_IN_EEPROM
-#undef CONFIG_ENV_IS_IN_NVRAM
-#undef CONFIG_ENV_IS_IN_FLASH
-#endif
-
-/*
- * Memory map
- */
-#define CONFIG_SYS_MBAR 0xF0000000
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_DEFAULT_MBAR 0x80000000
-#define CONFIG_SYS_SRAM_BASE (CONFIG_SYS_MBAR + 0x20000)
-#define CONFIG_SYS_SRAM_SIZE 0x8000
-
-/* Use SRAM until RAM will be available */
-#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_MBAR + 0x20000)
-#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in DPRAM */
-
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-# define CONFIG_SYS_RAMBOOT 1
-#endif
-
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-/* SDRAM configuration */
-#define CONFIG_SYS_SDRAM_TOTAL_BANKS 2
-#define CONFIG_SYS_SDRAM_SPD_I2C_ADDR 0x51 /* 7bit */
-#define CONFIG_SYS_SDRAM_SPD_SIZE 0x40
-#define CONFIG_SYS_SDRAM_CAS_LATENCY 4 /* (CL=2)x2 */
-
-/* SDRAM drive strength register */
-#define CONFIG_SYS_SDRAM_DRIVE_STRENGTH ((DRIVE_STRENGTH_LOW << SDRAMDS_SBE_SHIFT) | \
- (DRIVE_STRENGTH_HIGH << SDRAMDS_SBC_SHIFT) | \
- (DRIVE_STRENGTH_LOW << SDRAMDS_SBA_SHIFT) | \
- (DRIVE_STRENGTH_OFF << SDRAMDS_SBS_SHIFT) | \
- (DRIVE_STRENGTH_LOW << SDRAMDS_SBD_SHIFT))
-
-/*
- * Ethernet configuration
- */
-#define CONFIG_MPC8220_FEC 1
-#define CONFIG_FEC_10MBIT 1 /* Workaround for FEC 100Mbit problem */
-#define CONFIG_PHY_ADDR 0x18
-
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
-#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8220 CPUs */
-#if defined(CONFIG_CMD_KGDB)
-# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
-/*
- * Various low-level settings
- */
-#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
-#define CONFIG_SYS_HID0_FINAL HID0_ICE
-
-/*
- * JFFS2 partitions
- */
-
-/* No command line, one static partition */
-/*
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV "nor0"
-#define CONFIG_JFFS2_PART_SIZE 0x00400000
-#define CONFIG_JFFS2_PART_OFFSET 0x00000000
-*/
-
-/* mtdparts command line support */
-/*
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT "nor0=alaska-0"
-#define MTDPARTS_DEFAULT "mtdparts=alaska-0:4m(user)"
-*/
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h
index b09119a..1c9d08e 100644
--- a/include/configs/B4860QDS.h
+++ b/include/configs/B4860QDS.h
@@ -36,7 +36,6 @@
/* High Level Configuration Options */
#define CONFIG_BOOKE
-#define CONFIG_E6500
#define CONFIG_E500 /* BOOKE e500 family */
#define CONFIG_E500MC /* BOOKE e500mc family */
#define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */
@@ -528,6 +527,15 @@
#define CONFIG_SF_DEFAULT_MODE 0
/*
+ * MAPLE
+ */
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_MAPLE_MEM_PHYS 0xFA0000000ull
+#else
+#define CONFIG_SYS_MAPLE_MEM_PHYS 0xA0000000
+#endif
+
+/*
* General PCI
* Memory space is mapped 1-1, but I/O space must start from 0.
*/
@@ -623,7 +631,11 @@
#ifdef CONFIG_FMAN_ENET
#define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR 0x10
#define CONFIG_SYS_FM1_DTSEC6_PHY_ADDR 0x11
-#define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 4
+
+/*B4860 QDS AMC2PEX-2S default PHY_ADDR */
+#define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 0x7 /*SLOT 1*/
+#define CONFIG_SYS_FM1_10GEC2_PHY_ADDR 0x6 /*SLOT 2*/
+
#define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR 0x1c
#define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR 0x1d
diff --git a/include/configs/T4240QDS.h b/include/configs/T4240QDS.h
index 76b3ca6..6dd5c0d 100644
--- a/include/configs/T4240QDS.h
+++ b/include/configs/T4240QDS.h
@@ -25,7 +25,6 @@
*/
#define CONFIG_T4240QDS
#define CONFIG_PHYS_64BIT
-#define CONFIG_PPC_T4240
#define CONFIG_FSL_SATA_V2
#define CONFIG_PCIE4
diff --git a/include/configs/Yukon8220.h b/include/configs/Yukon8220.h
deleted file mode 100644
index 5f925b3..0000000
--- a/include/configs/Yukon8220.h
+++ /dev/null
@@ -1,326 +0,0 @@
-/*
- * (C) Copyright 2004
- * TsiChung Liew, Freescale Software Engineering, Tsi-Chung.Liew@freescale.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_MPC8220 1
-#define CONFIG_YUKON8220 1 /* ... on Yukon board */
-
-#define CONFIG_SYS_TEXT_BASE 0xfff00000
-
-#define CONFIG_BAT_RW 1 /* Use common BAT rw code */
-#define CONFIG_HIGH_BATS 1 /* High BATs supported */
-
-/* Input clock running at 30Mhz, read Hid1 for the CPU multiplier to
- determine the CPU speed. */
-#define CONFIG_SYS_MPC8220_CLKIN 30000000/* ... running at 30MHz */
-#define CONFIG_SYS_MPC8220_SYSPLL_VCO_MULTIPLIER 16 /* VCO multiplier can't be read from any register */
-
-/*
- * Serial console configuration
- */
-
-/* Define this for PSC console
-#define CONFIG_PSC_CONSOLE 1
-*/
-
-#define CONFIG_EXTUART_CONSOLE 1
-
-#ifdef CONFIG_EXTUART_CONSOLE
-# define CONFIG_CONS_INDEX 1
-# define CONFIG_SYS_NS16550_SERIAL
-# define CONFIG_SYS_NS16550
-# define CONFIG_SYS_NS16550_REG_SIZE 1
-# define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CPLD_BASE + 0x1008)
-# define CONFIG_SYS_NS16550_CLK 18432000
-#endif
-
-#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
-
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
-
-#define CONFIG_TIMESTAMP /* Print image info with timestamp */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_BOOTD
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_SNTP
-
-
-#define CONFIG_MII
-
-/*
- * Autobooting
- */
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#define CONFIG_BOOTARGS "root=/dev/ram rw"
-#define CONFIG_ETHADDR 00:e0:0c:bc:e0:60
-#define CONFIG_HAS_ETH1
-#define CONFIG_ETH1ADDR 00:e0:0c:bc:e0:61
-#define CONFIG_IPADDR 192.162.1.2
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_SERVERIP 192.162.1.1
-#define CONFIG_GATEWAYIP 192.162.1.1
-#define CONFIG_HOSTNAME yukon
-#define CONFIG_OVERWRITE_ETHADDR_ONCE
-
-
-/*
- * I2C configuration
- */
-#define CONFIG_HARD_I2C 1
-#define CONFIG_SYS_I2C_MODULE 1
-
-#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */
-#define CONFIG_SYS_I2C_SLAVE 0x7F
-
-/*
- * EEPROM configuration
- */
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 /* 1011000xb */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 70
-/*
-#define CONFIG_ENV_IS_IN_EEPROM 1
-#define CONFIG_ENV_OFFSET 0
-#define CONFIG_ENV_SIZE 256
-*/
-
-/* If CONFIG_SYS_AMD_BOOT is defined, the the system will boot from AMD.
- else undefined it will boot from Intel Strata flash */
-#define CONFIG_SYS_AMD_BOOT 1
-
-/*
- * Flexbus Chipselect configuration
- */
-#if defined (CONFIG_SYS_AMD_BOOT)
-#define CONFIG_SYS_CS0_BASE 0xfff0
-#define CONFIG_SYS_CS0_MASK 0x00080000 /* 512 KB */
-#define CONFIG_SYS_CS0_CTRL 0x003f0d40
-
-#define CONFIG_SYS_CS1_BASE 0xfe00
-#define CONFIG_SYS_CS1_MASK 0x01000000 /* 16 MB */
-#define CONFIG_SYS_CS1_CTRL 0x003f1540
-#else
-#define CONFIG_SYS_CS0_BASE 0xff00
-#define CONFIG_SYS_CS0_MASK 0x01000000 /* 16 MB */
-#define CONFIG_SYS_CS0_CTRL 0x003f1540
-
-#define CONFIG_SYS_CS1_BASE 0xfe08
-#define CONFIG_SYS_CS1_MASK 0x00080000 /* 512 KB */
-#define CONFIG_SYS_CS1_CTRL 0x003f0d40
-#endif
-
-#define CONFIG_SYS_CS2_BASE 0xf100
-#define CONFIG_SYS_CS2_MASK 0x00040000
-#define CONFIG_SYS_CS2_CTRL 0x003f1140
-
-#define CONFIG_SYS_CS3_BASE 0xf200
-#define CONFIG_SYS_CS3_MASK 0x00040000
-#define CONFIG_SYS_CS3_CTRL 0x003f1100
-
-
-#define CONFIG_SYS_FLASH0_BASE (CONFIG_SYS_CS0_BASE << 16)
-#define CONFIG_SYS_FLASH1_BASE (CONFIG_SYS_CS1_BASE << 16)
-
-#if defined (CONFIG_SYS_AMD_BOOT)
-#define CONFIG_SYS_AMD_BASE CONFIG_SYS_FLASH0_BASE
-#define CONFIG_SYS_INTEL_BASE CONFIG_SYS_FLASH1_BASE + 0xf00000
-#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_AMD_BASE
-#else
-#define CONFIG_SYS_INTEL_BASE CONFIG_SYS_FLASH0_BASE + 0xf00000
-#define CONFIG_SYS_AMD_BASE CONFIG_SYS_FLASH1_BASE
-#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_INTEL_BASE
-#endif
-
-#define CONFIG_SYS_CPLD_BASE (CONFIG_SYS_CS2_BASE << 16)
-#define CONFIG_SYS_FPGA_BASE (CONFIG_SYS_CS3_BASE << 16)
-
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 4 /* max num of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max num of sects on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
-#define CONFIG_SYS_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */
-#define CONFIG_SYS_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */
-#define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
-
-#define PHYS_AMD_SECT_SIZE 0x00010000 /* 64 KB sectors (x2) */
-#define PHYS_INTEL_SECT_SIZE 0x00020000 /* 128 KB sectors (x2) */
-
-#define CONFIG_SYS_FLASH_CHECKSUM
-/*
- * Environment settings
- */
-#define CONFIG_ENV_IS_IN_FLASH 1
-#if defined (CONFIG_SYS_AMD_BOOT)
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH0_BASE + CONFIG_SYS_CS0_MASK - PHYS_AMD_SECT_SIZE)
-#define CONFIG_ENV_SIZE PHYS_AMD_SECT_SIZE
-#define CONFIG_ENV_SECT_SIZE PHYS_AMD_SECT_SIZE
-#define CONFIG_ENV1_ADDR (CONFIG_SYS_FLASH1_BASE + CONFIG_SYS_CS1_MASK - PHYS_INTEL_SECT_SIZE)
-#define CONFIG_ENV1_SIZE PHYS_INTEL_SECT_SIZE
-#define CONFIG_ENV1_SECT_SIZE PHYS_INTEL_SECT_SIZE
-#else
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH0_BASE + CONFIG_SYS_CS0_MASK - PHYS_INTEL_SECT_SIZE)
-#define CONFIG_ENV_SIZE PHYS_INTEL_SECT_SIZE
-#define CONFIG_ENV_SECT_SIZE PHYS_INTEL_SECT_SIZE
-#define CONFIG_ENV1_ADDR (CONFIG_SYS_FLASH1_BASE + CONFIG_SYS_CS1_MASK - PHYS_AMD_SECT_SIZE)
-#define CONFIG_ENV1_SIZE PHYS_AMD_SECT_SIZE
-#define CONFIG_ENV1_SECT_SIZE PHYS_AMD_SECT_SIZE
-#endif
-
-#define CONFIG_ENV_OVERWRITE 1
-
-#if defined CONFIG_ENV_IS_IN_FLASH
-#undef CONFIG_ENV_IS_IN_NVRAM
-#undef CONFIG_ENV_IS_IN_EEPROM
-#elif defined CONFIG_ENV_IS_IN_NVRAM
-#undef CONFIG_ENV_IS_IN_FLASH
-#undef CONFIG_ENV_IS_IN_EEPROM
-#elif defined CONFIG_ENV_IS_IN_EEPROM
-#undef CONFIG_ENV_IS_IN_NVRAM
-#undef CONFIG_ENV_IS_IN_FLASH
-#endif
-
-#ifndef CONFIG_SYS_JFFS2_FIRST_SECTOR
-#define CONFIG_SYS_JFFS2_FIRST_SECTOR 0
-#endif
-#ifndef CONFIG_SYS_JFFS2_FIRST_BANK
-#define CONFIG_SYS_JFFS2_FIRST_BANK 0
-#endif
-#ifndef CONFIG_SYS_JFFS2_NUM_BANKS
-#define CONFIG_SYS_JFFS2_NUM_BANKS 1
-#endif
-#define CONFIG_SYS_JFFS2_LAST_BANK (CONFIG_SYS_JFFS2_FIRST_BANK + CONFIG_SYS_JFFS2_NUM_BANKS - 1)
-
-/*
- * Memory map
- */
-#define CONFIG_SYS_MBAR 0xF0000000
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_DEFAULT_MBAR 0x80000000
-#define CONFIG_SYS_SRAM_BASE (CONFIG_SYS_MBAR + 0x20000)
-#define CONFIG_SYS_SRAM_SIZE 0x8000
-
-/* Use SRAM until RAM will be available */
-#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_MBAR + 0x20000)
-#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in DPRAM */
-
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-# define CONFIG_SYS_RAMBOOT 1
-#endif
-
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-/* SDRAM configuration */
-#define CONFIG_SYS_SDRAM_TOTAL_BANKS 2
-#define CONFIG_SYS_SDRAM_SPD_I2C_ADDR 0x51 /* 7bit */
-#define CONFIG_SYS_SDRAM_SPD_SIZE 0x40
-#define CONFIG_SYS_SDRAM_CAS_LATENCY 4 /* (CL=2)x2 */
-
-/* SDRAM drive strength register */
-#define CONFIG_SYS_SDRAM_DRIVE_STRENGTH ((DRIVE_STRENGTH_LOW << SDRAMDS_SBE_SHIFT) | \
- (DRIVE_STRENGTH_HIGH << SDRAMDS_SBC_SHIFT) | \
- (DRIVE_STRENGTH_LOW << SDRAMDS_SBA_SHIFT) | \
- (DRIVE_STRENGTH_OFF << SDRAMDS_SBS_SHIFT) | \
- (DRIVE_STRENGTH_LOW << SDRAMDS_SBD_SHIFT))
-
-/*
- * Ethernet configuration
- */
-#define CONFIG_MPC8220_FEC 1
-#define CONFIG_FEC_10MBIT 1 /* Workaround for FEC 100Mbit problem */
-#define CONFIG_PHY_ADDR 0x18
-
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
-#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8220 CPUs */
-#if defined(CONFIG_CMD_KGDB)
-# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
-/*
- * Various low-level settings
- */
-#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
-#define CONFIG_SYS_HID0_FINAL HID0_ICE
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index f019134..7cc3ef2 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -60,7 +60,7 @@
"rdaddr=0x81000000\0" \
"bootdir=/boot\0" \
"bootfile=uImage\0" \
- "fdtfile=\0" \
+ "fdtfile=undefined\0" \
"console=ttyO0,115200n8\0" \
"optargs=\0" \
"mtdids=" MTDIDS_DEFAULT "\0" \
@@ -145,8 +145,9 @@
"if test $board_name = A33515BB; then " \
"setenv fdtfile am335x-evm.dtb; fi; " \
"if test $board_name = A335X_SK; then " \
- "setenv fdtfile am335x-evmsk.dtb; fi\0" \
-
+ "setenv fdtfile am335x-evmsk.dtb; fi " \
+ "if test $fdtfile = undefined; then " \
+ "echo WARNING: Could not determine device tree to use; fi; \0"
#endif
#define CONFIG_BOOTCOMMAND \
@@ -305,8 +306,14 @@
/* Defines for SPL */
#define CONFIG_SPL
#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_TEXT_BASE 0x402F0400
-#define CONFIG_SPL_MAX_SIZE (101 * 1024)
+/*
+ * Place the image at the start of the ROM defined image space and leave
+ * space for SRAM scratch entries (see arch/arm/include/omap_common.h).
+ * We limit our size to the ROM-defined downloaded image area, and use the
+ * rest of the space for stack.
+ */
+#define CONFIG_SPL_TEXT_BASE 0x402F0500
+#define CONFIG_SPL_MAX_SIZE (0x4030C000 - CONFIG_SPL_TEXT_BASE)
#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
#define CONFIG_SPL_BSS_START_ADDR 0x80000000
diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h
index ebcc69a..4328944 100644
--- a/include/configs/at91sam9260ek.h
+++ b/include/configs/at91sam9260ek.h
@@ -105,6 +105,8 @@
#define CONFIG_CMD_PING 1
#define CONFIG_CMD_DHCP 1
#define CONFIG_CMD_NAND 1
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_FAT
#define CONFIG_CMD_USB 1
/*
@@ -128,6 +130,24 @@
(ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE)
#endif
+/*
+ * The (arm)linux board id set by generic code depending on configured board
+ * (see boards.cfg for different boards)
+ */
+#ifdef CONFIG_AT91SAM9G20
+ /* the sam9g20 variants have two different board ids */
+# ifdef CONFIG_AT91SAM9G20EK_2MMC
+ /* we may be setup for the 2MMC variant of at91sam9g20ek */
+# define CONFIG_MACH_TYPE MACH_TYPE_AT91SAM9G20EK_2MMC
+# else
+ /* or the normal at91sam9g20ek */
+# define CONFIG_MACH_TYPE MACH_TYPE_AT91SAM9G20EK
+# endif
+#else
+ /* otherwise default to good old at91sam9260ek */
+# define CONFIG_MACH_TYPE MACH_TYPE_AT91SAM9260EK
+#endif
+
/* DataFlash */
#ifndef CONFIG_AT91SAM9G20EK_2MMC
#define CONFIG_ATMEL_DATAFLASH_SPI
@@ -158,6 +178,18 @@
#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13
#endif
+/* MMC */
+#ifdef CONFIG_CMD_MMC
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_GENERIC_ATMEL_MCI
+#endif
+
+/* FAT */
+#ifdef CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+#endif
+
/* NOR flash - no real flash on this board */
#define CONFIG_SYS_NO_FLASH 1
@@ -170,13 +202,11 @@
/* USB */
#define CONFIG_USB_ATMEL
#define CONFIG_USB_OHCI_NEW 1
-#define CONFIG_DOS_PARTITION 1
#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9260_UHP_BASE */
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260"
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
#define CONFIG_USB_STORAGE 1
-#define CONFIG_CMD_FAT 1
#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
@@ -211,7 +241,7 @@
"mtdparts=atmel_nand:-(root) " \
"rw rootfstype=jffs2"
-#else /* CONFIG_SYS_USE_NANDFLASH */
+#elif defined(CONFIG_SYS_USE_NANDFLASH)
/* bootstrap + u-boot + env + linux in nandflash */
#define CONFIG_ENV_IS_IN_NAND 1
@@ -226,6 +256,22 @@
"512k(dtb),6M(kernel)ro,-(rootfs) " \
"root=/dev/mtdblock7 rw rootfstype=jffs2"
+#else /* CONFIG_SYS_USE_MMC */
+/* bootstrap + u-boot + env + linux in mmc */
+#define CONFIG_ENV_IS_IN_MMC
+/* For FAT system, most cases it should be in the reserved sector */
+#define CONFIG_ENV_OFFSET 0x2000
+#define CONFIG_ENV_SIZE 0x1000
+#define CONFIG_SYS_MMC_ENV_DEV 0
+
+#define CONFIG_BOOTCOMMAND \
+ "fatload mmc 0:1 0x22000000 uImage; bootm"
+#define CONFIG_BOOTARGS \
+ "console=ttyS0,115200 earlyprintk " \
+ "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \
+ "256k(env),256k(env_redundant),256k(spare)," \
+ "512k(dtb),6M(kernel)ro,-(rootfs) " \
+ "root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait"
#endif
#define CONFIG_SYS_PROMPT "U-Boot> "
diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h
new file mode 100644
index 0000000..8d2673d
--- /dev/null
+++ b/include/configs/at91sam9n12ek.h
@@ -0,0 +1,232 @@
+/*
+ * (C) Copyright 2013 Atmel Corporation.
+ * Josh Wu <josh.wu@atmel.com>
+ *
+ * Configuation settings for the AT91SAM9N12-EK boards.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __AT91SAM9N12_CONFIG_H_
+#define __AT91SAM9N12_CONFIG_H_
+
+/*
+ * SoC must be defined first, before hardware.h is included.
+ * In this case SoC is defined in boards.cfg.
+ */
+#include <asm/hardware.h>
+
+#define CONFIG_SYS_TEXT_BASE 0x26f00000
+
+#define CONFIG_ARM926EJS
+#define CONFIG_AT91FAMILY
+
+/* ARM asynchronous clock */
+#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
+#define CONFIG_SYS_AT91_MAIN_CLOCK 16000000 /* main clock xtal */
+#define CONFIG_SYS_HZ 1000
+
+/* Misc CPU related */
+#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_DISPLAY_CPUINFO
+
+#define CONFIG_OF_LIBFDT
+
+/* general purpose I/O */
+#define CONFIG_AT91_GPIO
+
+/* serial console */
+#define CONFIG_ATMEL_USART
+#define CONFIG_USART_BASE ATMEL_BASE_DBGU
+#define CONFIG_USART_ID ATMEL_ID_SYS
+#define CONFIG_BAUDRATE 115200
+
+/* LCD */
+#define CONFIG_LCD
+#define LCD_BPP LCD_COLOR16
+#define LCD_OUTPUT_BPP 24
+#define CONFIG_LCD_LOGO
+#define CONFIG_LCD_INFO
+#define CONFIG_LCD_INFO_BELOW_LOGO
+#define CONFIG_SYS_WHITE_ON_BLACK
+#define CONFIG_ATMEL_HLCD
+#define CONFIG_ATMEL_LCD_RGB565
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+
+#define CONFIG_BOOTDELAY 3
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/* NOR flash - no real flash on this board */
+#define CONFIG_SYS_NO_FLASH
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_FPGA
+
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_FAT
+
+#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_SYS_SDRAM_BASE 0x20000000
+#define CONFIG_SYS_SDRAM_SIZE 0x08000000
+
+/*
+ * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM,
+ * leaving the correct space for initial global data structure above
+ * that address while providing maximum stack area below.
+ */
+# define CONFIG_SYS_INIT_SP_ADDR \
+ (ATMEL_BASE_SRAM + 0x1000 - GENERATED_GBL_DATA_SIZE)
+
+/* DataFlash */
+#ifdef CONFIG_CMD_SF
+#define CONFIG_ATMEL_SPI
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_ATMEL
+#define CONFIG_SF_DEFAULT_SPEED 30000000
+#define CONFIG_ENV_SPI_MODE SPI_MODE_3
+#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
+#endif
+
+/* NAND flash */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_NAND_ATMEL
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_BASE 0x40000000
+#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
+#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
+#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTD, 4
+#define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTD, 5
+
+/* PMECC & PMERRLOC */
+#define CONFIG_ATMEL_NAND_HWECC
+#define CONFIG_ATMEL_NAND_HW_PMECC
+#define CONFIG_PMECC_CAP 2
+#define CONFIG_PMECC_SECTOR_SIZE 512
+#define CONFIG_PMECC_INDEX_TABLE_OFFSET 0x8000
+#endif
+
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_MTD_DEVICE
+#define CONFIG_CMD_MTDPARTS
+#define MTDIDS_DEFAULT "nand0=atmel_nand"
+#define MTDPARTS_DEFAULT \
+ "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \
+ "256k(env),256k(env_redundant),256k(spare)," \
+ "512k(dtb),6M(kernel)ro,-(rootfs)"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "console=console=ttyS0,115200\0" \
+ "mtdparts="MTDPARTS_DEFAULT"\0" \
+ "bootargs_nand=rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs rw\0"\
+ "bootargs_mmc=root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait\0"
+
+/* MMC */
+#ifdef CONFIG_CMD_MMC
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_GENERIC_ATMEL_MCI
+#endif
+
+/* FAT */
+#ifdef CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+#endif
+
+#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
+
+#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END 0x26e00000
+
+#ifdef CONFIG_SYS_USE_SPIFLASH
+
+/* bootstrap + u-boot + env + linux in dataflash on CS0 */
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_OFFSET 0x5000
+#define CONFIG_ENV_SIZE 0x3000
+#define CONFIG_ENV_SECT_SIZE 0x1000
+#define CONFIG_BOOTCOMMAND \
+ "setenv bootargs ${console} ${mtdparts} ${bootargs_nand};" \
+ "sf probe 0; sf read 0x22000000 0x100000 0x300000; " \
+ "bootm 0x22000000"
+
+#elif defined(CONFIG_SYS_USE_NANDFLASH)
+
+/* bootstrap + u-boot + env + linux in nandflash */
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET 0xc0000
+#define CONFIG_ENV_OFFSET_REDUND 0x100000
+#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
+#define CONFIG_BOOTCOMMAND \
+ "setenv bootargs ${console} ${mtdparts} ${bootargs_nand};" \
+ "nand read 0x21000000 0x180000 0x080000;" \
+ "nand read 0x22000000 0x200000 0x400000;" \
+ "bootm 0x22000000 - 0x21000000"
+
+#else /* CONFIG_SYS_USE_MMC */
+
+/* bootstrap + u-boot + env + linux in mmc */
+#define CONFIG_ENV_IS_IN_MMC
+/* For FAT system, most cases it should be in the reserved sector */
+#define CONFIG_ENV_OFFSET 0x2000
+#define CONFIG_ENV_SIZE 0x1000
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#define CONFIG_BOOTCOMMAND \
+ "setenv bootargs ${console} ${mtdparts} ${bootargs_mmc};" \
+ "fatload mmc 0:1 0x21000000 dtb;" \
+ "fatload mmc 0:1 0x22000000 uImage;" \
+ "bootm 0x22000000 - 0x21000000"
+
+#endif
+
+#define CONFIG_SYS_PROMPT "U-Boot> "
+#define CONFIG_SYS_CBSIZE 256
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) \
+ + 16)
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_HUSH_PARSER
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
+#define CONFIG_STACKSIZE (32 * 1024) /* regular stack */
+
+#endif
diff --git a/include/configs/beaver.h b/include/configs/beaver.h
index 058da4f..165de13 100644
--- a/include/configs/beaver.h
+++ b/include/configs/beaver.h
@@ -71,6 +71,20 @@
#define CONFIG_CMD_SF
#define CONFIG_SPI_FLASH_SIZE (4 << 20)
+/* USB Host support */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_TEGRA
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_USB
+
+/* USB networking support */
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+
+/* General networking support */
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_DHCP
+
#include "tegra-common-post.h"
#endif /* __CONFIG_H */
diff --git a/include/configs/bf527-ezkit.h b/include/configs/bf527-ezkit.h
index 7b51b53..db1b613 100644
--- a/include/configs/bf527-ezkit.h
+++ b/include/configs/bf527-ezkit.h
@@ -149,10 +149,15 @@
#define CONFIG_MUSB_TIMEOUT 100000
#endif
+/* Don't waste time transferring a logo over the UART */
+#if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_UART)
+/*# define CONFIG_VIDEO*/
+#endif
/*
* Video Settings
*/
+#ifdef CONFIG_VIDEO
#ifdef CONFIG_BF527_EZKIT_REV_2_1
# define CONFIG_LQ035Q1_SPI_BUS 0
# define CONFIG_LQ035Q1_SPI_CS 7
@@ -166,7 +171,7 @@
#else
# define EASYLOGO_HEADER <asm/bfin_logo_230x230_lzma.h>
#endif
-
+#endif /* CONFIG_VIDEO */
/*
* Misc Settings
@@ -175,11 +180,6 @@
#define CONFIG_RTC_BFIN
#define CONFIG_UART_CONSOLE 1
-/* Don't waste time transferring a logo over the UART */
-#if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_UART)
-# define CONFIG_VIDEO
-#endif
-
/*
* Pull in common ADI header for remaining command/environment setup
diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h
index 05029d4..25cebf8 100644
--- a/include/configs/bf537-stamp.h
+++ b/include/configs/bf537-stamp.h
@@ -52,7 +52,7 @@
#define CONFIG_EBIU_AMBCTL0_VAL 0x7BB07BB0
#define CONFIG_EBIU_AMBCTL1_VAL 0xFFC27BB0
-#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
+#define CONFIG_SYS_MONITOR_LEN (768 * 1024)
#define CONFIG_SYS_MALLOC_LEN (384 * 1024)
@@ -135,15 +135,17 @@
/*
* SPI_MMC Settings
*/
+#define CONFIG_MMC_SPI
+#ifdef CONFIG_MMC_SPI
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
-#define CONFIG_MMC_SPI
-
+#endif
/*
* NAND Settings
*/
/* #define CONFIG_NAND_PLAT */
+#ifdef CONFIG_NAND_PLAT
#define CONFIG_SYS_NAND_BASE 0x20212000
#define CONFIG_SYS_MAX_NAND_DEVICE 1
@@ -158,7 +160,7 @@
#define NAND_PLAT_WRITE_CMD(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_CLE(chip), cmd)
#define NAND_PLAT_WRITE_ADR(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_ALE(chip), cmd)
#define NAND_PLAT_GPIO_DEV_READY GPIO_PF3
-
+#endif /* CONFIG_NAND_PLAT */
/*
* CF-CARD IDE-HDD Support
diff --git a/include/configs/bf548-ezkit.h b/include/configs/bf548-ezkit.h
index e6b05db..da5f029 100644
--- a/include/configs/bf548-ezkit.h
+++ b/include/configs/bf548-ezkit.h
@@ -120,18 +120,16 @@
#define CONFIG_ENV_SECT_SIZE 0x8000
#endif
-
/*
* NAND Settings
*/
-#define CONFIG_BFIN_NFC_CTL_VAL 0x0033
#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND)
-# define CONFIG_BFIN_NFC_BOOTROM_ECC
-#endif
+#define CONFIG_BFIN_NFC_CTL_VAL 0x0033
+#define CONFIG_BFIN_NFC_BOOTROM_ECC
#define CONFIG_DRIVER_NAND_BFIN
-#define CONFIG_SYS_NAND_BASE 0 /* not actually used */
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-
+#define CONFIG_SYS_NAND_BASE 0 /* not actually used */
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#endif
/*
* I2C Settings
@@ -184,13 +182,12 @@
#define CONFIG_UART_CONSOLE 1
#define CONFIG_BFIN_SPI_IMG_SIZE 0x50000
-#ifndef __ADSPBF542__
-/* Don't waste time transferring a logo over the UART */
-# if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_UART)
-# define CONFIG_VIDEO
-# define EASYLOGO_HEADER <asm/bfin_logo_230x230_gzip.h>
-# endif
-# define CONFIG_DEB_DMA_URGENT
+#define CONFIG_ADI_GPIO2
+
+#undef CONFIG_VIDEO
+#ifdef CONFIG_VIDEO
+#define EASYLOGO_HEADER < asm/bfin_logo_230x230_gzip.h >
+#define CONFIG_DEB_DMA_URGENT
#endif
/* Define if want to do post memory test */
diff --git a/include/configs/bf561-ezkit.h b/include/configs/bf561-ezkit.h
index 1a9d27e..6ee1e4c 100644
--- a/include/configs/bf561-ezkit.h
+++ b/include/configs/bf561-ezkit.h
@@ -98,6 +98,11 @@
*/
#define CONFIG_UART_CONSOLE 0
+/*
+ * Run core 1 from L1 SRAM start address when init uboot on core 0
+ */
+/* #define CONFIG_CORE1_RUN 1 */
+
/*
* Pull in common ADI header for remaining command/environment setup
diff --git a/include/configs/bf609-ezkit.h b/include/configs/bf609-ezkit.h
index 02149fa..1a43e1b 100644
--- a/include/configs/bf609-ezkit.h
+++ b/include/configs/bf609-ezkit.h
@@ -144,10 +144,13 @@
#define CONFIG_UART_CONSOLE 0
#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_SOFTSWITCH
#define CONFIG_SYS_MEMTEST_END (CONFIG_STACKBASE - 20*1024*1024 + 4)
#define CONFIG_BFIN_SOFT_SWITCH
+#define CONFIG_ADI_GPIO2
+
#if 0
#define CONFIG_UART_MEM 1024
#undef CONFIG_UART_CONSOLE
@@ -155,6 +158,13 @@
#undef CONFIG_UART_CONSOLE_IS_JTAG
#endif
+#define CONFIG_BOARD_SIZE_LIMIT $$((512 * 1024))
+
+/*
+ * Run core 1 from L1 SRAM start address when init uboot on core 0
+ */
+/* #define CONFIG_CORE1_RUN 1 */
+
/*
* Pull in common ADI header for remaining command/environment setup
*/
diff --git a/include/configs/bfin_adi_common.h b/include/configs/bfin_adi_common.h
index d3ae3a7..e1a6fe3 100644
--- a/include/configs/bfin_adi_common.h
+++ b/include/configs/bfin_adi_common.h
@@ -111,8 +111,8 @@
#ifndef CONFIG_BAUDRATE
# define CONFIG_BAUDRATE 57600
#endif
-#ifndef CONFIG_DEBUG_EARLY_SERIAL
-# define CONFIG_SYS_BFIN_UART
+#ifdef CONFIG_UART_CONSOLE
+# define CONFIG_BFIN_SERIAL
#endif
/*
@@ -317,5 +317,13 @@
#define CONFIG_BFIN_SPI_GPIO_CS /* Only matters if BFIN_SPI is enabled */
#define CONFIG_LZMA
#define CONFIG_MONITOR_IS_IN_RAM
-
+#ifdef CONFIG_HW_WATCHDOG
+# define CONFIG_BFIN_WATCHDOG
+# ifndef CONFIG_WATCHDOG_TIMEOUT_MSECS
+# define CONFIG_WATCHDOG_TIMEOUT_MSECS 5000
+# endif
+#endif
+#ifndef CONFIG_ADI_GPIO2
+# define CONFIG_ADI_GPIO1
+#endif
#endif
diff --git a/include/configs/ca9x4_ct_vxp.h b/include/configs/ca9x4_ct_vxp.h
deleted file mode 100644
index a7cd1d4..0000000
--- a/include/configs/ca9x4_ct_vxp.h
+++ /dev/null
@@ -1,198 +0,0 @@
-/*
- * (C) Copyright 2010 Linaro
- * Matt Waddel, <matt.waddel@linaro.org>
- *
- * Configuration for Versatile Express. Parts were derived from other ARM
- * configurations.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* Board info register */
-#define SYS_ID 0x10000000
-#define CONFIG_REVISION_TAG 1
-#define CONFIG_SYS_TEXT_BASE 0x60800000
-
-#define CONFIG_SYS_MEMTEST_START 0x60000000
-#define CONFIG_SYS_MEMTEST_END 0x20000000
-#define CONFIG_SYS_HZ 1000
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_SYS_L2CACHE_OFF 1
-#define CONFIG_INITRD_TAG 1
-
-#define CONFIG_OF_LIBFDT 1
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
-
-#define SCTL_BASE 0x10001000
-#define VEXPRESS_FLASHPROG_FLVPPEN (1 << 0)
-
-/* SMSC9115 Ethernet from SMSC9118 family */
-#define CONFIG_SMC911X 1
-#define CONFIG_SMC911X_32_BIT 1
-#define CONFIG_SMC911X_BASE 0x4E000000
-
-/* PL011 Serial Configuration */
-#define CONFIG_PL011_SERIAL
-#define CONFIG_PL011_CLOCK 24000000
-#define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0, \
- (void *)CONFIG_SYS_SERIAL1}
-#define CONFIG_CONS_INDEX 0
-
-#define CONFIG_BAUDRATE 38400
-#define CONFIG_SYS_SERIAL0 0x10009000
-#define CONFIG_SYS_SERIAL1 0x1000A000
-
-/* Command line configuration */
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PXE
-#define CONFIG_MENU
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_ENV
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_RUN
-
-#define CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION 1
-#define CONFIG_MMC 1
-#define CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_ARM_PL180_MMCI
-#define CONFIG_ARM_PL180_MMCI_BASE 0x10005000
-#define CONFIG_SYS_MMC_MAX_BLK_COUNT 127
-#define CONFIG_ARM_PL180_MMCI_CLOCK_FREQ 6250000
-
-/* BOOTP options */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_PXE
-#define CONFIG_BOOTP_PXE_CLIENTARCH 0x100
-#define CONFIG_BOOTP_VCI_STRING "U-boot.armv7.ca9x4_ct_vxp"
-
-/* Miscellaneous configurable options */
-#undef CONFIG_SYS_CLKS_IN_HZ
-#define CONFIG_SYS_LOAD_ADDR 0x60008000 /* load address */
-#define LINUX_BOOT_PARAM_ADDR 0x60000200
-#define CONFIG_BOOTDELAY 2
-
-/* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS 2
-#define PHYS_SDRAM_1 0x60000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_2 0x80000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x20000000 /* 512 MB */
-#define PHYS_SDRAM_2_SIZE 0x20000000 /* 512 MB */
-
-/* additions for new relocation code */
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + \
- CONFIG_SYS_INIT_RAM_SIZE - \
- GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_GBL_DATA_OFFSET
-
-/* Basic environment settings */
-#define CONFIG_BOOTCOMMAND "run bootflash;"
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "loadaddr=0x80008000\0" \
- "ramdisk_addr_r=0x61000000\0" \
- "kernel_addr=0x44100000\0" \
- "ramdisk_addr=0x44800000\0" \
- "maxramdisk=0x1800000\0" \
- "pxefile_addr_r=0x88000000\0" \
- "kernel_addr_r=0x80008000\0" \
- "console=ttyAMA0,38400n8\0" \
- "dram=1024M\0" \
- "root=/dev/sda1 rw\0" \
- "mtd=armflash:1M@0x800000(uboot),7M@0x1000000(kernel)," \
- "24M@0x2000000(initrd)\0" \
- "flashargs=setenv bootargs root=${root} console=${console} " \
- "mem=${dram} mtdparts=${mtd} mmci.fmax=190000 " \
- "devtmpfs.mount=0 vmalloc=256M\0" \
- "bootflash=run flashargs; " \
- "cp ${ramdisk_addr} ${ramdisk_addr_r} ${maxramdisk}; " \
- "bootm ${kernel_addr} ${ramdisk_addr_r}\0"
-
-/* FLASH and environment organization */
-#define PHYS_FLASH_SIZE 0x04000000 /* 64MB */
-#define CONFIG_SYS_FLASH_CFI 1
-#define CONFIG_FLASH_CFI_DRIVER 1
-#define CONFIG_SYS_FLASH_SIZE 0x04000000
-#define CONFIG_SYS_MAX_FLASH_BANKS 2
-#define CONFIG_SYS_FLASH_BASE0 0x40000000
-#define CONFIG_SYS_FLASH_BASE1 0x44000000
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE0
-
-/* Timeout values in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (2 * CONFIG_SYS_HZ) /* Erase Timeout */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (2 * CONFIG_SYS_HZ) /* Write Timeout */
-
-/* 255 0x40000 sectors + first or last sector may have 4 erase regions = 259 */
-#define CONFIG_SYS_MAX_FLASH_SECT 259 /* Max sectors */
-#define FLASH_MAX_SECTOR_SIZE 0x00040000 /* 256 KB sectors */
-
-/* Room required on the stack for the environment data */
-#define CONFIG_ENV_SIZE FLASH_MAX_SECTOR_SIZE
-
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* use buffered writes */
-
-/*
- * Amount of flash used for environment:
- * We don't know which end has the small erase blocks so we use the penultimate
- * sector location for the environment
- */
-#define CONFIG_ENV_SECT_SIZE FLASH_MAX_SECTOR_SIZE
-#define CONFIG_ENV_OVERWRITE 1
-
-/* Store environment at top of flash */
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_OFFSET (PHYS_FLASH_SIZE - \
- (2 * CONFIG_ENV_SECT_SIZE))
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE1 + \
- CONFIG_ENV_OFFSET)
-#define CONFIG_SYS_FLASH_PROTECTION /* The devices have real protection */
-#define CONFIG_SYS_FLASH_EMPTY_INFO /* flinfo indicates empty blocks */
-#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE0, \
- CONFIG_SYS_FLASH_BASE1 }
-
-/* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PROMPT "VExpress# "
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */
-#define CONFIG_CMD_SOURCE
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING 1
-#define CONFIG_SYS_MAXARGS 16 /* max command args */
-
-#endif
diff --git a/include/configs/cardhu.h b/include/configs/cardhu.h
index 6a99175..fd46083 100644
--- a/include/configs/cardhu.h
+++ b/include/configs/cardhu.h
@@ -70,6 +70,20 @@
#define CONFIG_CMD_SF
#define CONFIG_SPI_FLASH_SIZE (4 << 20)
+/* USB Host support */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_TEGRA
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_USB
+
+/* USB networking support */
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+
+/* General networking support */
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_DHCP
+
#include "tegra-common-post.h"
#endif /* __CONFIG_H */
diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h
index 5bacc77..be04a75 100644
--- a/include/configs/coreboot.h
+++ b/include/configs/coreboot.h
@@ -38,7 +38,6 @@
#define CONFIG_SHOW_BOOT_PROGRESS
#define CONFIG_LAST_STAGE_INIT
#define CONFIG_SYS_VSNPRINTF
-#define CONFIG_INTEL_CORE_ARCH /* Sandy bridge and ivy bridge chipsets. */
#define CONFIG_ZBOOT_32
#define CONFIG_PHYSMEM
#define CONFIG_SYS_EARLY_PCI_INIT
@@ -49,6 +48,19 @@
#define CONFIG_OF_SEPARATE
#define CONFIG_DEFAULT_DEVICE_TREE link
+#define CONFIG_BOOTSTAGE
+#define CONFIG_BOOTSTAGE_REPORT
+#define CONFIG_BOOTSTAGE_FDT
+#define CONFIG_CMD_BOOTSTAGE
+/* Place to stash bootstage data from first-stage U-Boot */
+#define CONFIG_BOOTSTAGE_STASH 0x0110f000
+#define CONFIG_BOOTSTAGE_STASH_SIZE 0x7fc
+#define CONFIG_BOOTSTAGE_USER_COUNT 60
+
+#define CONFIG_LZO
+#undef CONFIG_ZLIB
+#undef CONFIG_GZIP
+
/*-----------------------------------------------------------------------
* Watchdog Configuration
*/
@@ -218,7 +230,6 @@
#define CONFIG_SYS_MEMTEST_END 0x01000000
#define CONFIG_SYS_LOAD_ADDR 0x100000
#define CONFIG_SYS_HZ 1000
-#define CONFIG_SYS_X86_ISR_TIMER
/*-----------------------------------------------------------------------
* SDRAM Configuration
@@ -235,8 +246,9 @@
* CPU Features
*/
-#define CONFIG_SYS_GENERIC_TIMER
+#define CONFIG_SYS_X86_TSC_TIMER
#define CONFIG_SYS_PCAT_INTERRUPTS
+#define CONFIG_SYS_PCAT_TIMER
#define CONFIG_SYS_NUM_IRQS 16
/*-----------------------------------------------------------------------
diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h
index 5cc9b5a..2e2d439 100644
--- a/include/configs/corenet_ds.h
+++ b/include/configs/corenet_ds.h
@@ -38,6 +38,8 @@
#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/corenet_ds/rcw_p4080ds.cfg
#elif defined(CONFIG_P5020DS)
#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/corenet_ds/rcw_p5020ds.cfg
+#elif defined(CONFIG_P5040DS)
+#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/corenet_ds/rcw_p5040ds.cfg
#endif
#endif
diff --git a/include/configs/da830evm.h b/include/configs/da830evm.h
index 198892b..00e92a6 100644
--- a/include/configs/da830evm.h
+++ b/include/configs/da830evm.h
@@ -36,6 +36,7 @@
#define CONFIG_MACH_DAVINCI_DA830_EVM
#define CONFIG_ARM926EJS /* arm926ejs CPU core */
#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */
+#define CONFIG_SOC_DA830 /* TI DA830 SoC */
#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID)
#define CONFIG_SYS_OSCIN_FREQ 24000000
#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE
@@ -226,6 +227,28 @@
#define CONFIG_CMD_SAVEENV
#endif
+/* SD/MMC configuration */
+#ifndef CONFIG_USE_NAND
+#define CONFIG_MMC
+#define CONFIG_DAVINCI_MMC_SD1
+#define CONFIG_GENERIC_MMC
+#define CONFIG_DAVINCI_MMC
+#endif
+
+/*
+ * Enable MMC commands only when
+ * MMC support is present
+ */
+#if defined(CONFIG_MMC) || defined(CONFIG_USB_DA8XX)
+#define CONFIG_DOS_PARTITION /* include support for FAT/storage */
+#define CONFIG_CMD_FAT /* include support for FAT cmd */
+#endif
+
+#ifdef CONFIG_MMC
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_EXT2
+#endif
+
#if !defined(CONFIG_USE_NAND) && \
!defined(CONFIG_USE_NOR) && \
!defined(CONFIG_USE_SPIFLASH)
@@ -244,8 +267,6 @@
#define CONFIG_USB_STORAGE /* MSC class support */
#define CONFIG_CMD_STORAGE /* inclue support for usb-storage cmd */
-#define CONFIG_CMD_FAT /* inclue support for FAT/storage */
-#define CONFIG_DOS_PARTITION /* inclue support for FAT/storage */
#ifdef CONFIG_USB_KEYBOARD /* HID class support */
#define CONFIG_SYS_USB_EVENT_POLL
diff --git a/include/configs/dalmore.h b/include/configs/dalmore.h
index 7b68f7c..2723843 100644
--- a/include/configs/dalmore.h
+++ b/include/configs/dalmore.h
@@ -75,6 +75,20 @@
#define CONFIG_CMD_SF
#define CONFIG_SPI_FLASH_SIZE (4 << 20)
+/* USB Host support */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_TEGRA
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_USB
+
+/* USB networking support */
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+
+/* General networking support */
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_DHCP
+
#include "tegra-common-post.h"
#endif /* __CONFIG_H */
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index 28a306b..c11f005 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -28,11 +28,20 @@
#ifndef __CONFIG_DRA7XX_EVM_H
#define __CONFIG_DRA7XX_EVM_H
+/* High Level Configuration Options */
+#define CONFIG_DRA7XX /* in a TI DRA7XX core */
#define CONFIG_ENV_IS_NOWHERE /* For now. */
#include <configs/omap5_common.h>
-#define CONFIG_DRA7XX /* in a TI DRA7XX core */
#define CONFIG_SYS_PROMPT "DRA752 EVM # "
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_SYS_NS16550_COM1 UART1_BASE
+#define CONFIG_BAUDRATE 115200
+
+#define CONFIG_SYS_OMAP_ABE_SYSCK
+
+#define CONSOLEDEV "ttyO0"
+
#endif /* __CONFIG_DRA7XX_EVM_H */
diff --git a/include/configs/exynos5250-dt.h b/include/configs/exynos5250-dt.h
index 8a82892..b32d1bd 100644
--- a/include/configs/exynos5250-dt.h
+++ b/include/configs/exynos5250-dt.h
@@ -78,9 +78,9 @@
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (4 << 20))
/* select serial console configuration */
-#define CONFIG_SERIAL3 /* use SERIAL 3 */
#define CONFIG_BAUDRATE 115200
#define EXYNOS5_DEFAULT_UART_OFFSET 0x010000
+#define CONFIG_SILENT_CONSOLE
/* Console configuration */
#define CONFIG_CONSOLE_MUX
@@ -93,15 +93,18 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
EXYNOS_DEVICE_SETTINGS
-#define TZPC_BASE_OFFSET 0x10000
-
/* SD/MMC configuration */
#define CONFIG_GENERIC_MMC
#define CONFIG_MMC
#define CONFIG_SDHCI
#define CONFIG_S5P_SDHCI
+#define CONFIG_DWMMC
+#define CONFIG_EXYNOS_DWMMC
+#define CONFIG_SUPPORT_EMMC_BOOT
+
#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_SKIP_LOWLEVEL_INIT
/* PWM */
#define CONFIG_PWM
@@ -135,6 +138,7 @@
#define CONFIG_USB_STORAGE
/* USB boot mode */
+#define CONFIG_USB_BOOTING
#define EXYNOS_COPY_USB_FNPTR_ADDR 0x02020070
#define EXYNOS_USB_SECONDARY_BOOT 0xfeed0002
#define EXYNOS_IRAM_SECONDARY_BASE 0x02020018
@@ -150,8 +154,10 @@
#define CONFIG_SPL
#define COPY_BL2_FNPTR_ADDR 0x02020030
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+
/* specific .lds file */
-#define CONFIG_SPL_LDSCRIPT "board/samsung/smdk5250/smdk5250-uboot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT "board/samsung/common/exynos-uboot-spl.lds"
#define CONFIG_SPL_TEXT_BASE 0x02023400
#define CONFIG_SPL_MAX_FOOTPRINT (14 * 1024)
@@ -227,15 +233,19 @@
#define BL2_START_OFFSET (CONFIG_BL2_OFFSET/512)
#define BL2_SIZE_BLOC_COUNT (CONFIG_BL2_SIZE/512)
-#define OM_STAT (0x1f << 1)
+#define CONFIG_SPI_BOOTING
#define EXYNOS_COPY_SPI_FNPTR_ADDR 0x02020058
#define SPI_FLASH_UBOOT_POS (CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE)
#define CONFIG_DOS_PARTITION
+#define CONFIG_EFI_PARTITION
+#define CONFIG_CMD_PART
+#define CONFIG_PARTITION_UUIDS
+
#define CONFIG_IRAM_STACK 0x02050000
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000)
+#define CONFIG_SYS_INIT_SP_ADDR CONFIG_IRAM_STACK
/* I2C */
#define CONFIG_SYS_I2C_INIT_BOARD
@@ -262,6 +272,7 @@
#define CONFIG_CMD_SF
#define CONFIG_CMD_SPI
#define CONFIG_SPI_FLASH_WINBOND
+#define CONFIG_SPI_FLASH_GIGADEVICE
#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
#define CONFIG_SF_DEFAULT_SPEED 50000000
#define EXYNOS5_SPI_NUM_CONTROLLERS 5
diff --git a/include/configs/goflexhome.h b/include/configs/goflexhome.h
new file mode 100644
index 0000000..e776514
--- /dev/null
+++ b/include/configs/goflexhome.h
@@ -0,0 +1,151 @@
+/*
+ * Copyright (C) 2013 Suriyan Ramasami <suriyan.r@gmail.com>
+ *
+ * Based on dockstar.h originally written by
+ * Copyright (C) 2010 Eric C. Cooper <ecc@cmu.edu>
+ *
+ * Based on sheevaplug.h originally written by
+ * Prafulla Wadaskar <prafulla@marvell.com>
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef _CONFIG_GOFLEXHOME_H
+#define _CONFIG_GOFLEXHOME_H
+
+/*
+ * Version number information
+ */
+#define CONFIG_IDENT_STRING "\nSeagate GoFlex Home"
+
+/*
+ * High Level Configuration Options (easy to change)
+ */
+#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
+#define CONFIG_KIRKWOOD 1 /* SOC Family Name */
+#define CONFIG_KW88F6281 1 /* SOC Name */
+#define CONFIG_MACH_GOFLEXHOME /* Machine type */
+#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
+
+/*
+ * Default GPIO configuration and LED status
+ */
+#define GOFLEXHOME_OE_LOW (~(0))
+#define GOFLEXHOME_OE_HIGH (~(0))
+#define GOFLEXHOME_OE_VAL_LOW (1 << 29) /* USB_PWEN low */
+#define GOFLEXHOME_OE_VAL_HIGH (1 << 17) /* LED pin high */
+
+/* PHY related */
+#define MV88E1116_LED_FCTRL_REG 10
+#define MV88E1116_CPRSP_CR3_REG 21
+#define MV88E1116_MAC_CTRL_REG 21
+#define MV88E1116_PGADR_REG 22
+#define MV88E1116_RGMII_TXTM_CTRL (1 << 4)
+#define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
+
+/*
+ * Commands configuration
+ */
+#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
+#define CONFIG_CONSOLE_MUX
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+
+#include <config_cmd_default.h>
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_USB
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_EXT4
+#define CONFIG_SYS_MVFS /* Picks up Filesystem from mv-common.h */
+
+/*
+ * mv-common.h should be defined after CMD configs since it used them
+ * to enable certain macros
+ */
+#include "mv-common.h"
+
+#undef CONFIG_SYS_PROMPT /* previously defined in mv-common.h */
+#define CONFIG_SYS_PROMPT "GoFlexHome> " /* Command Prompt */
+
+/*
+ * Environment variables configurations
+ */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_ENV_IS_IN_NAND 1
+#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */
+#else
+#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */
+#endif
+/*
+ * max 4k env size is enough, but in case of nand
+ * it has to be rounded to sector size
+ */
+#define CONFIG_ENV_SIZE 0x20000 /* 128k */
+#define CONFIG_ENV_ADDR 0xC0000
+#define CONFIG_ENV_OFFSET 0xC0000 /* env starts here */
+
+/*
+ * Default environment variables
+ */
+#define CONFIG_BOOTCOMMAND \
+ "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \
+ "ubi part root; " \
+ "ubifsmount ubi:root; " \
+ "ubifsload 0x800000 ${kernel}; " \
+ "bootm 0x800000"
+
+#define CONFIG_MTDPARTS \
+ "mtdparts=orion_nand:1m(uboot),6M(uImage),-(root)\0"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "console=console=ttyS0,115200\0" \
+ "mtdids=nand0=orion_nand\0" \
+ "mtdparts="CONFIG_MTDPARTS \
+ "kernel=/boot/uImage\0" \
+ "bootargs_root=ubi.mtd=root root=ubi0:root rootfstype=ubifs ro\0"
+
+/*
+ * Ethernet Driver configuration
+ */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
+#define CONFIG_PHY_BASE_ADR 0
+#endif /* CONFIG_CMD_NET */
+
+/*
+ * * SATA Driver configuration
+ * */
+#ifdef CONFIG_MVSATA_IDE
+#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
+#endif /*CONFIG_MVSATA_IDE*/
+
+/*
+ * * RTC driver configuration
+ * */
+#ifdef CONFIG_CMD_DATE
+#define CONFIG_RTC_MV
+#endif /* CONFIG_CMD_DATE */
+
+#endif /* _CONFIG_GOFLEXHOME_H */
diff --git a/include/configs/harmony.h b/include/configs/harmony.h
index 0c73f86..27aaf16 100644
--- a/include/configs/harmony.h
+++ b/include/configs/harmony.h
@@ -49,6 +49,7 @@
#define CONFIG_MACH_TYPE MACH_TYPE_HARMONY
#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_LATE_INIT /* Make sure LCD init is complete */
/* SD/MMC */
#define CONFIG_MMC
@@ -83,6 +84,14 @@
#define CONFIG_CMD_NET
#define CONFIG_CMD_DHCP
+/* LCD support */
+#define CONFIG_LCD
+#define CONFIG_PWM_TEGRA
+#define CONFIG_VIDEO_TEGRA
+#define LCD_BPP LCD_COLOR16
+#define CONFIG_SYS_WHITE_ON_BLACK
+#define CONFIG_CONSOLE_SCROLL_LINES 10
+
#include "tegra-common-post.h"
#endif /* __CONFIG_H */
diff --git a/include/configs/igep0033.h b/include/configs/igep0033.h
index 1912d7d..afbd549 100644
--- a/include/configs/igep0033.h
+++ b/include/configs/igep0033.h
@@ -214,8 +214,14 @@
/* Defines for SPL */
#define CONFIG_SPL
#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_TEXT_BASE 0x402F0400
-#define CONFIG_SPL_MAX_SIZE (101 * 1024)
+/*
+ * Place the image at the start of the ROM defined image space and leave
+ * space for SRAM scratch entries (see arch/arm/include/omap_common.h).
+ * We limit our size to the ROM-defined downloaded image area, and use the
+ * rest of the space for stack.
+ */
+#define CONFIG_SPL_TEXT_BASE 0x402F0500
+#define CONFIG_SPL_MAX_SIZE (0x4030C000 - CONFIG_SPL_TEXT_BASE)
#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
#define CONFIG_SPL_BSS_START_ADDR 0x80000000
diff --git a/include/configs/lacie_kw.h b/include/configs/lacie_kw.h
index 09b5798..e2b3b21 100644
--- a/include/configs/lacie_kw.h
+++ b/include/configs/lacie_kw.h
@@ -120,10 +120,14 @@
#endif
/*
+ * Enable platform initialisation via misc_init_r() function
+ */
+#define CONFIG_MISC_INIT_R
+
+/*
* Ethernet Driver configuration
*/
#ifdef CONFIG_CMD_NET
-#define CONFIG_MISC_INIT_R /* Call misc_init_r() to initialize MAC address */
#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
#define CONFIG_NETCONSOLE
#endif
@@ -153,6 +157,9 @@
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* 16-byte page size */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* 8-bit device address */
+#if defined(CONFIG_NET2BIG_V2)
+#define CONFIG_SYS_I2C_G762_ADDR 0x3e
+#endif
#endif /* CONFIG_CMD_I2C */
/*
diff --git a/include/configs/lp8x4x.h b/include/configs/lp8x4x.h
new file mode 100644
index 0000000..026f321
--- /dev/null
+++ b/include/configs/lp8x4x.h
@@ -0,0 +1,262 @@
+/*
+ * ICP DAS LP-8x4x configuration file
+ *
+ * Copyright (C) 2013 Sergey Yanovich <ynvich@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Board Configuration Options
+ */
+#define CONFIG_CPU_PXA27X /* Marvell PXA270 CPU */
+#define MACH_TYPE_LP8X4X 4539 /* ICP DAS LP-8x4x */
+#define CONFIG_MACH_TYPE MACH_TYPE_LP8X4X
+#define CONFIG_SYS_TEXT_BASE 0x00000000
+
+#define CONFIG_SYS_MALLOC_LEN (128*1024)
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_BOOTCOMMAND \
+ "bootm 80000;"
+
+#define CONFIG_BOOTARGS \
+ "console=ttySA0,115200 mem=128M root=/dev/mmcblk0p1 rw" \
+ "init=/sbin/init rootfstype=ext3"
+
+#define CONFIG_TIMESTAMP
+#define CONFIG_BOOTDELAY 2 /* Autoboot delay */
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_LZMA /* LZMA compression support */
+#undef CONFIG_OF_LIBFDT
+
+/*
+ * Serial Console Configuration
+ */
+#define CONFIG_PXA_SERIAL
+#define CONFIG_FFUART 1
+#define CONFIG_CONS_INDEX 3
+#define CONFIG_BAUDRATE 115200
+
+/*
+ * Bootloader Components Configuration
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_ENV
+#undef CONFIG_CMD_IMLS
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_USB
+#undef CONFIG_LCD
+#undef CONFIG_CMD_IDE
+
+/*
+ * Networking Configuration
+ * chip on the ICPDAS LINPAC board
+ */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+
+#define CONFIG_DRIVER_DM9000 1
+#define CONFIG_DM9000_BASE 0x0C000000
+#define DM9000_IO 0x0C000000
+#define DM9000_DATA 0x0C004000
+#define DM9000_IO_2 0x0D000000
+#define DM9000_DATA_2 0x0D004000
+#define CONFIG_NET_RETRY_COUNT 10
+
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#endif
+
+/*
+ * MMC Card Configuration
+ */
+#ifdef CONFIG_CMD_MMC
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_PXA_MMC_GENERIC
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
+#define CONFIG_DOS_PARTITION
+#endif
+
+/*
+ * KGDB
+ */
+#ifdef CONFIG_CMD_KGDB
+#define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port speed */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+/*
+ * HUSH Shell Configuration
+ */
+#define CONFIG_SYS_HUSH_PARSER 1
+
+#undef CONFIG_SYS_LONGHELP
+#ifdef CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT "$ "
+#else
+#define CONFIG_SYS_PROMPT "=> "
+#endif
+#define CONFIG_SYS_CBSIZE 256
+#define CONFIG_SYS_PBSIZE \
+ (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_DEVICE_NULLDEV 1
+#define CONFIG_CMDLINE_EDITING 1
+#define CONFIG_AUTO_COMPLETE 1
+
+/*
+ * Clock Configuration
+ */
+#define CONFIG_SYS_HZ 1000 /* Timer @ 3250000 Hz */
+
+/*
+ * DRAM Map
+ */
+#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */
+#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */
+
+#define CONFIG_SYS_DRAM_BASE 0xa0000000 /* CS0 */
+#define CONFIG_SYS_DRAM_SIZE 0x08000000 /* 128 MB DRAM */
+
+#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
+
+#define CONFIG_SYS_LOAD_ADDR 0xa0008000
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+/* Use first 64kb bank of the internal SRAM */
+#define CONFIG_SYS_INIT_SP_ADDR 0x5c010000
+
+/*
+ * NOR FLASH
+ */
+#define CONFIG_SYS_MONITOR_BASE 0x0
+#define CONFIG_SYS_MONITOR_LEN 0x40000
+#define CONFIG_ENV_ADDR \
+ (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_ENV_SIZE 0x40000
+#define CONFIG_ENV_SECT_SIZE 0x40000
+
+#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
+#define PHYS_FLASH_2 0x02000000 /* Flash Bank #2 */
+
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER 1
+
+#define CONFIG_SYS_MAX_FLASH_SECT (4 + 255)
+#define CONFIG_SYS_MAX_FLASH_BANKS 2
+#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2 }
+
+#define CONFIG_SYS_FLASH_ERASE_TOUT (25*CONFIG_SYS_HZ)
+#define CONFIG_SYS_FLASH_WRITE_TOUT (25*CONFIG_SYS_HZ)
+
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
+#define CONFIG_SYS_FLASH_PROTECTION 1
+
+#define CONFIG_ENV_IS_IN_FLASH 1
+
+/*
+ * GPIO settings
+ */
+#define CONFIG_SYS_GPSR0_VAL 0x0808c014
+#define CONFIG_SYS_GPSR1_VAL 0x00cf0002
+#define CONFIG_SYS_GPSR2_VAL 0x0221c000
+#define CONFIG_SYS_GPSR3_VAL 0x00020000
+
+#define CONFIG_SYS_GPCR0_VAL 0x00000000
+#define CONFIG_SYS_GPCR1_VAL 0x0000ab80
+#define CONFIG_SYS_GPCR2_VAL 0x00100000
+#define CONFIG_SYS_GPCR3_VAL 0x0
+
+#define CONFIG_SYS_GPDR0_VAL 0xc0e9ddf4
+#define CONFIG_SYS_GPDR1_VAL 0xfcffab83
+#define CONFIG_SYS_GPDR2_VAL 0x02f1ffff
+#define CONFIG_SYS_GPDR3_VAL 0x00021b81
+
+#define CONFIG_SYS_GAFR0_L_VAL 0x80000000
+#define CONFIG_SYS_GAFR0_U_VAL 0xa5e54018
+#define CONFIG_SYS_GAFR1_L_VAL 0x999a955a
+#define CONFIG_SYS_GAFR1_U_VAL 0xaaa5a00a
+#define CONFIG_SYS_GAFR2_L_VAL 0xaaaaaaaa
+#define CONFIG_SYS_GAFR2_U_VAL 0x55f0a402
+#define CONFIG_SYS_GAFR3_L_VAL 0x540a950c
+#define CONFIG_SYS_GAFR3_U_VAL 0x00001599
+
+#define CONFIG_SYS_PSSR_VAL 0x32
+
+/*
+ * Clock settings
+ */
+#define CONFIG_SYS_CKEN 0x005002c0
+#define CONFIG_SYS_CCCR 0x02000290
+#define CONFIG_SYS_CLKCFG 0x0000000b
+
+/*
+ * Memory settings
+ */
+#define CONFIG_SYS_MSC0_VAL 0x2bd8aad2
+#define CONFIG_SYS_MSC1_VAL 0xb8c9b8dc
+#define CONFIG_SYS_MSC2_VAL 0xfff9b8c9
+#define CONFIG_SYS_FLYCNFG_VAL 0x00010001
+#define CONFIG_SYS_MDREFR_VAL 0x2093e018
+#define CONFIG_SYS_MDCNFG_VAL 0x890009d1
+#define CONFIG_SYS_MDMRS_VAL 0x00220022
+#define CONFIG_SYS_SXCNFG_VAL 0x40044004
+
+/*
+ * PCMCIA and CF Interfaces
+ */
+#define CONFIG_SYS_MECR_VAL 0x00000001
+#define CONFIG_SYS_MCMEM0_VAL 0x0000c497
+#define CONFIG_SYS_MCMEM1_VAL 0x0000c497
+#define CONFIG_SYS_MCATT0_VAL 0x0000c497
+#define CONFIG_SYS_MCATT1_VAL 0x0000c497
+#define CONFIG_SYS_MCIO0_VAL 0x00008407
+#define CONFIG_SYS_MCIO1_VAL 0x00008407
+
+/*
+ * LCD
+ */
+#ifdef CONFIG_LCD
+#define CONFIG_VOIPAC_LCD
+#endif
+
+/*
+ * USB
+ */
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_SYS_USB_OHCI_CPU_INIT
+#define CONFIG_SYS_USB_OHCI_BOARD_INIT
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
+#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x4C000000
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME "lp8x4x"
+#define CONFIG_USB_STORAGE
+#endif
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h
index 0c4e719..17f53ba 100644
--- a/include/configs/microblaze-generic.h
+++ b/include/configs/microblaze-generic.h
@@ -104,7 +104,7 @@
/* gpio */
#ifdef XILINX_GPIO_BASEADDR
-# define CONFIG_SYS_GPIO_0 1
+# define CONFIG_XILINX_GPIO
# define CONFIG_SYS_GPIO_0_ADDR XILINX_GPIO_BASEADDR
#endif
@@ -312,6 +312,7 @@
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_MFSL
#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_GPIO
#if defined(CONFIG_DCACHE) || defined(CONFIG_ICACHE)
# define CONFIG_CMD_CACHE
diff --git a/include/configs/omap2420h4.h b/include/configs/omap2420h4.h
deleted file mode 100644
index 04e8d3a..0000000
--- a/include/configs/omap2420h4.h
+++ /dev/null
@@ -1,264 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments.
- * Richard Woodruff <r-woodruff2@ti.com>
- * Kshitij Gupta <kshitij@ti.com>
- *
- * Configuration settings for the 242x TI H4 board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */
-#define CONFIG_OMAP 1 /* in a TI OMAP core */
-#define CONFIG_OMAP2420 1 /* which is in a 2420 */
-#define CONFIG_OMAP2420H4 1 /* and on a H4 board */
-/*#define CONFIG_APTIX 1 #* define if on APTIX test chip */
-/*#define CONFIG_VIRTIO 1 #* Using Virtio simulator */
-
-#define CONFIG_STANDALONE_LOAD_ADDR 0x80300000
-
-/* Clock config to target*/
-#define PRCM_CONFIG_II 1
-/* #define PRCM_CONFIG_III 1 */
-
-#include <asm/arch/omap2420.h> /* get chip and board defs */
-
-/* On H4, NOR and NAND flash are mutual exclusive.
- Define this if you want to use NAND
- */
-/*#define CONFIG_SYS_NAND_BOOT */
-
-#ifdef CONFIG_APTIX
-#define V_SCLK 1500000
-#else
-#define V_SCLK 12000000
-#endif
-
-/* input clock of PLL */
-/* the OMAP2420 H4 has 12MHz, 13MHz, or 19.2Mhz crystal input */
-#define CONFIG_SYS_CLK_FREQ V_SCLK
-
-#define CONFIG_MISC_INIT_R
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-#define CONFIG_REVISION_TAG 1
-#define CONFIG_OF_LIBFDT
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_ENV_SIZE SZ_128K /* Total Size of Environment Sector */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_128K)
-
-/*
- * Hardware drivers
- */
-
-/*
- * SMC91c96 Etherent
- */
-#define CONFIG_LAN91C96
-#define CONFIG_LAN91C96_BASE (H4_CS1_BASE+0x300)
-#define CONFIG_LAN91C96_EXT_PHY
-
-/*
- * NS16550 Configuration
- */
-#ifdef CONFIG_APTIX
-#define V_NS16550_CLK (6000000) /* 6MHz in current MaxSet */
-#else
-#define V_NS16550_CLK (48000000) /* 48MHz (APLL96/2) */
-#endif
-
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE (-4)
-#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK /* 3MHz (1.5MHz*2) */
-#define CONFIG_SYS_NS16550_COM1 OMAP2420_UART1
-
-/*
- * select serial console configuration
- */
-#define CONFIG_SERIAL1 1 /* UART1 on H4 */
-
- /*
- * I2C configuration
- */
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_DRIVER_OMAP24XX_I2C
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#ifdef CONFIG_SYS_NAND_BOOT
- #define CONFIG_CMD_DHCP
- #define CONFIG_CMD_I2C
- #define CONFIG_CMD_NAND
- #define CONFIG_CMD_JFFS2
-#else
- #define CONFIG_CMD_DHCP
- #define CONFIG_CMD_I2C
- #define CONFIG_CMD_JFFS2
-
- #undef CONFIG_CMD_SOURCE
-#endif
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-
-#define CONFIG_BOOTDELAY 3
-
-#ifdef NFS_BOOT_DEFAULTS
-#define CONFIG_BOOTARGS "mem=32M console=ttyS0,115200n8 noinitrd root=/dev/nfs rw nfsroot=128.247.77.158:/home/a0384864/wtbu/rootfs ip=dhcp"
-#else
-#define CONFIG_BOOTARGS "root=/dev/ram0 rw mem=32M console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192"
-#endif
-
-#define CONFIG_NETMASK 255.255.254.0
-#define CONFIG_IPADDR 128.247.77.90
-#define CONFIG_SERVERIP 128.247.77.158
-#define CONFIG_BOOTFILE "uImage"
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#ifdef CONFIG_APTIX
-# define CONFIG_SYS_PROMPT "OMAP2420 Aptix # "
-#else
-# define CONFIG_SYS_PROMPT "OMAP242x H4 # "
-#endif
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START (OMAP2420_SDRC_CS0) /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END (OMAP2420_SDRC_CS0+SZ_31M)
-
-#define CONFIG_SYS_LOAD_ADDR (OMAP2420_SDRC_CS0) /* default load address */
-
-/* The 2420 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by
- * 32KHz clk, or from external sig. This rate is divided by a local divisor.
- */
-#ifdef CONFIG_APTIX
-#define V_PTV 3
-#else
-#define V_PTV 7 /* use with 12MHz/128 */
-#endif
-
-#define CONFIG_SYS_TIMERBASE OMAP2420_GPT2
-#define CONFIG_SYS_PTV V_PTV /* 2^(PTV+1) */
-#define CONFIG_SYS_HZ 1000
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */
-#define PHYS_SDRAM_1 OMAP2420_SDRC_CS0
-#define PHYS_SDRAM_1_SIZE SZ_32M /* at least 32 meg */
-#define PHYS_SDRAM_2 OMAP2420_SDRC_CS1
-
-#define PHYS_FLASH_SECT_SIZE SZ_128K
-#define PHYS_FLASH_1 H4_CS0_BASE /* Flash Bank #1 */
-#define PHYS_FLASH_SIZE_1 SZ_32M
-#define PHYS_FLASH_2 (H4_CS0_BASE+SZ_32M) /* same cs, 2 chips in series */
-#define PHYS_FLASH_SIZE_2 SZ_32M
-
-#define PHYS_SRAM 0x4020F800
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT (259) /* max number of sectors on one chip */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE /* Monitor at beginning of flash */
-#define CONFIG_SYS_MONITOR_LEN SZ_128K /* Reserve 1 sector */
-#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + PHYS_FLASH_SIZE_1 }
-
-#ifdef CONFIG_SYS_NAND_BOOT
-#define CONFIG_ENV_IS_IN_NAND 1
-#define CONFIG_ENV_OFFSET 0x80000 /* environment starts here */
-#else
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + SZ_256K)
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_SECT_SIZE PHYS_FLASH_SECT_SIZE
-#define CONFIG_ENV_OFFSET ( CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN ) /* Environment after Monitor */
-#endif
-
-/*-----------------------------------------------------------------------
- * CFI FLASH driver setup
- */
-#define CONFIG_SYS_FLASH_CFI 1 /* Flash memory is CFI compliant */
-#define CONFIG_FLASH_CFI_DRIVER 1 /* Use drivers/mtd/cfi_flash.c */
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */
-#define CONFIG_SYS_FLASH_PROTECTION 1 /* Use hardware sector protection */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (100*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (100*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#define CONFIG_SYS_JFFS2_MEM_NAND
-
-/*
- * JFFS2 partitions
- */
-/* No command line, one static partition, whole device */
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV "nor1"
-#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
-#define CONFIG_JFFS2_PART_OFFSET 0x00000000
-
-/* mtdparts command line support */
-/* Note: fake mtd_id used, no linux mtd map file */
-/*
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT "nor1=omap2420-1"
-#define MTDPARTS_DEFAULT "mtdparts=omap2420-1:-(jffs2)"
-*/
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR PHYS_SRAM
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h
index d6448b0..2fa4382 100644
--- a/include/configs/omap4_common.h
+++ b/include/configs/omap4_common.h
@@ -45,10 +45,6 @@
#define CONFIG_DISPLAY_CPUINFO 1
#define CONFIG_DISPLAY_BOARDINFO 1
-/* Clock Defines */
-#define V_OSCK 38400000 /* Clock output from T2 */
-#define V_SCLK V_OSCK
-
#define CONFIG_MISC_INIT_R
#define CONFIG_OF_LIBFDT 1
@@ -154,6 +150,7 @@
"console=ttyO2,115200n8\0" \
"fdt_high=0xffffffff\0" \
"fdtaddr=0x80f80000\0" \
+ "fdtfile=undefined\0" \
"bootpart=0:2\0" \
"bootdir=/boot\0" \
"bootfile=zImage\0" \
@@ -181,8 +178,12 @@
"setenv fdtfile omap4-sdp.dtb; fi; " \
"if test $board_name = panda; then " \
"setenv fdtfile omap4-panda.dtb; fi;" \
+ "if test $board_name = panda-a4; then " \
+ "setenv fdtfile omap4-panda-a4.dtb; fi;" \
"if test $board_name = panda-es; then " \
- "setenv fdtfile omap4-panda-es.dtb; fi; \0" \
+ "setenv fdtfile omap4-panda-es.dtb; fi;" \
+ "if test $fdtfile = undefined; then " \
+ "echo WARNING: Could not determine device tree to use; fi; \0" \
"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
#define CONFIG_BOOTCOMMAND \
diff --git a/include/configs/omap5_common.h b/include/configs/omap5_common.h
index deb5e9f..b87ee42 100644
--- a/include/configs/omap5_common.h
+++ b/include/configs/omap5_common.h
@@ -45,10 +45,6 @@
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
-/* Clock Defines */
-#define V_OSCK 19200000 /* Clock output from T2 */
-#define V_SCLK V_OSCK
-
#define CONFIG_MISC_INIT_R
#define CONFIG_OF_LIBFDT
@@ -81,10 +77,6 @@
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
-#define CONFIG_CONS_INDEX 3
-#define CONFIG_SYS_NS16550_COM3 UART3_BASE
-
-#define CONFIG_BAUDRATE 115200
/* CPU */
#define CONFIG_ARCH_CPU_INIT
@@ -144,9 +136,10 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"loadaddr=0x82000000\0" \
- "console=ttyO2,115200n8\0" \
+ "console=" CONSOLEDEV ",115200n8\0" \
"fdt_high=0xffffffff\0" \
"fdtaddr=0x80f80000\0" \
+ "fdtfile=undefined\0" \
"bootpart=0:2\0" \
"bootdir=/boot\0" \
"bootfile=zImage\0" \
@@ -174,7 +167,11 @@
"bootz ${loadaddr} - ${fdtaddr}\0" \
"findfdt="\
"if test $board_name = omap5_uevm; then " \
- "setenv fdtfile omap5-uevm.dtb; fi;\0 " \
+ "setenv fdtfile omap5-uevm.dtb; fi; " \
+ "if test $board_name = dra7xx; then " \
+ "setenv fdtfile dra7-evm.dtb; fi;" \
+ "if test $fdtfile = undefined; then " \
+ "echo WARNING: Could not determine device tree to use; fi; \0" \
"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile};\0" \
#define CONFIG_BOOTCOMMAND \
@@ -246,6 +243,10 @@
#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
#endif
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_PALMAS_POWER
+#endif
+
/* Defines for SPL */
#define CONFIG_SPL
#define CONFIG_SPL_FRAMEWORK
diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h
index 9e0339b..46dacc2 100644
--- a/include/configs/omap5_uevm.h
+++ b/include/configs/omap5_uevm.h
@@ -35,10 +35,9 @@
#include <configs/omap5_common.h>
-/* TWL6035 */
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_PALMAS_POWER
-#endif
+#define CONFIG_CONS_INDEX 3
+#define CONFIG_SYS_NS16550_COM3 UART3_BASE
+#define CONFIG_BAUDRATE 115200
/* MMC ENV related defines */
#define CONFIG_ENV_IS_IN_MMC
@@ -54,7 +53,9 @@
#define CONFIG_PARTITION_UUIDS
#define CONFIG_CMD_PART
-#define CONFIG_SYS_PROMPT "OMAP5430 EVM # "
+#define CONFIG_SYS_PROMPT "OMAP5432 uEVM # "
+
+#define CONSOLEDEV "ttyO2"
#define CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC 16296
#endif /* __CONFIG_OMAP5_EVM_H */
diff --git a/include/configs/origen.h b/include/configs/origen.h
index ff2b24d..5013aee 100644
--- a/include/configs/origen.h
+++ b/include/configs/origen.h
@@ -36,6 +36,7 @@
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_BOARD_EARLY_INIT_F
/* Keep L2 Cache Disabled */
#define CONFIG_L2_OFF 1
@@ -67,6 +68,8 @@
#define CONFIG_BAUDRATE 115200
#define EXYNOS4_DEFAULT_UART_OFFSET 0x020000
+#define CONFIG_SKIP_LOWLEVEL_INIT
+
/* SD/MMC configuration */
#define CONFIG_GENERIC_MMC
#define CONFIG_MMC
@@ -96,6 +99,8 @@
#define CONFIG_SPL
#define COPY_BL2_FNPTR_ADDR 0x02020030
+#define CONFIG_SPL_TEXT_BASE 0x02021410
+
#define CONFIG_BOOTCOMMAND "fatload mmc 0 40007000 uImage; bootm 40007000"
/* Miscellaneous configurable options */
@@ -145,7 +150,10 @@
#define CONFIG_ENV_OFFSET (RESERVE_BLOCK_SIZE + BL1_SIZE)
#define CONFIG_DOS_PARTITION 1
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SPL_LDSCRIPT "board/samsung/common/exynos-uboot-spl.lds"
+#define CONFIG_SPL_MAX_FOOTPRINT (14 * 1024)
+
+#define CONFIG_SYS_INIT_SP_ADDR 0x02040000
/* U-boot copy size from boot Media to DRAM.*/
#define COPY_BL2_SIZE 0x80000
@@ -154,4 +162,5 @@
/* Enable devicetree support */
#define CONFIG_OF_LIBFDT
+
#endif /* __CONFIG_H */
diff --git a/include/configs/palmtreo680.h b/include/configs/palmtreo680.h
new file mode 100644
index 0000000..2ab6fd2
--- /dev/null
+++ b/include/configs/palmtreo680.h
@@ -0,0 +1,286 @@
+/*
+ * Palm Treo 680 configuration file
+ *
+ * Copyright (C) 2013 Mike Dunn <mikedunn@newsguy.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ *
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Board Configuration Options
+ */
+#define CONFIG_CPU_PXA27X
+#define CONFIG_PALMTREO680
+#define CONFIG_MACH_TYPE MACH_TYPE_TREO680
+
+#define CONFIG_SYS_MALLOC_LEN (4096*1024)
+
+#define CONFIG_LZMA
+
+/*
+ * Serial Console Configuration
+ */
+#define CONFIG_PXA_SERIAL
+#define CONFIG_FFUART 1
+#define CONFIG_BAUDRATE 9600
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_CONS_INDEX 3
+
+/* we have nand (although technically nand *is* flash...) */
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_LCD
+/* #define CONFIG_KEYBOARD */ /* TODO */
+
+/*
+ * Bootloader Components Configuration
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_SOURCE
+#undef CONFIG_CMD_XIMG
+
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_NAND
+
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+
+/*
+ * MMC Card Configuration
+ */
+#ifdef CONFIG_CMD_MMC
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_PXA_MMC_GENERIC
+
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
+#define CONFIG_DOS_PARTITION
+#endif
+
+/*
+ * LCD
+ */
+#ifdef CONFIG_LCD
+#define CONFIG_PXA_LCD
+#define CONFIG_ACX544AKN
+#define CONFIG_LCD_LOGO
+#define CONFIG_SYS_LCD_PXA_NO_L_BIAS /* don't configure GPIO77 as L_BIAS */
+#define LCD_BPP LCD_COLOR16
+#define CONFIG_FB_ADDR 0x5c000000 /* internal SRAM */
+#define CONFIG_CMD_BMP
+#define CONFIG_SPLASH_SCREEN /* requires "splashimage" env var */
+#define CONFIG_SPLASH_SCREEN_ALIGN /* requires "splashpos" env var */
+#define CONFIG_VIDEO_BMP_GZIP
+#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20)
+
+#endif
+
+/*
+ * KGDB
+ */
+#ifdef CONFIG_CMD_KGDB
+#define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port speed */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+/*
+ * HUSH Shell Configuration
+ */
+#define CONFIG_SYS_HUSH_PARSER 1
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+
+#define CONFIG_SYS_LONGHELP
+#ifdef CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT "$ "
+#else
+#define CONFIG_SYS_PROMPT "=> "
+#endif
+#define CONFIG_SYS_CBSIZE 256
+#define CONFIG_SYS_PBSIZE \
+ (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_DEVICE_NULLDEV 1
+
+/*
+ * Clock Configuration
+ */
+#undef CONFIG_SYS_CLKS_IN_HZ
+#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
+#define CONFIG_SYS_CPUSPEED 0x210 /* 416MHz ; N=2,L=16 */
+
+/*
+ * Stack sizes
+ */
+#define CONFIG_STACKSIZE (128*1024) /* regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
+#endif
+
+/*
+ * DRAM Map
+ */
+#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */
+#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
+
+#define CONFIG_SYS_DRAM_BASE 0xa0000000
+#define CONFIG_SYS_DRAM_SIZE 0x04000000 /* 64 MB DRAM */
+
+#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
+#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_DRAM_BASE
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+
+/*
+ * GPIO settings
+ */
+#define CONFIG_SYS_GAFR0_L_VAL 0x0E000000
+#define CONFIG_SYS_GAFR0_U_VAL 0xA500001A
+#define CONFIG_SYS_GAFR1_L_VAL 0x60000002
+#define CONFIG_SYS_GAFR1_U_VAL 0xAAA07959
+#define CONFIG_SYS_GAFR2_L_VAL 0x02AAAAAA
+#define CONFIG_SYS_GAFR2_U_VAL 0x41440F08
+#define CONFIG_SYS_GAFR3_L_VAL 0x56AA95FF
+#define CONFIG_SYS_GAFR3_U_VAL 0x00001401
+#define CONFIG_SYS_GPCR0_VAL 0x1FF80400
+#define CONFIG_SYS_GPCR1_VAL 0x03003FC1
+#define CONFIG_SYS_GPCR2_VAL 0x01C1E000
+#define CONFIG_SYS_GPCR3_VAL 0x01C1E000
+#define CONFIG_SYS_GPDR0_VAL 0xCFF90400
+#define CONFIG_SYS_GPDR1_VAL 0xFB22BFC1
+#define CONFIG_SYS_GPDR2_VAL 0x93CDFFDF
+#define CONFIG_SYS_GPDR3_VAL 0x0069FF81
+#define CONFIG_SYS_GPSR0_VAL 0x02000018
+#define CONFIG_SYS_GPSR1_VAL 0x00000000
+#define CONFIG_SYS_GPSR2_VAL 0x000C0000
+#define CONFIG_SYS_GPSR3_VAL 0x00080000
+
+#define CONFIG_SYS_PSSR_VAL 0x30
+
+/*
+ * Clock settings
+ */
+#define CONFIG_SYS_CKEN 0x01ffffff
+#define CONFIG_SYS_CCCR 0x02000210
+
+/*
+ * Memory settings
+ */
+#define CONFIG_SYS_MSC0_VAL 0x7ff844c8
+#define CONFIG_SYS_MSC1_VAL 0x7ff86ab4
+#define CONFIG_SYS_MSC2_VAL 0x7ff87ff8
+#define CONFIG_SYS_MDCNFG_VAL 0x0B880acd
+#define CONFIG_SYS_MDREFR_VAL 0x201fa031
+#define CONFIG_SYS_MDMRS_VAL 0x00320032
+#define CONFIG_SYS_FLYCNFG_VAL 0x00000000
+#define CONFIG_SYS_SXCNFG_VAL 0x40044004
+#define CONFIG_SYS_MECR_VAL 0x00000003
+#define CONFIG_SYS_MCMEM0_VAL 0x0001c391
+#define CONFIG_SYS_MCMEM1_VAL 0x0001c391
+#define CONFIG_SYS_MCATT0_VAL 0x0001c391
+#define CONFIG_SYS_MCATT1_VAL 0x0001c391
+#define CONFIG_SYS_MCIO0_VAL 0x00014611
+#define CONFIG_SYS_MCIO1_VAL 0x0001c391
+
+/*
+ * USB
+ */
+#define CONFIG_USB_DEVICE
+#define CONFIG_USB_TTY
+#define CONFIG_USB_DEV_PULLUP_GPIO 114
+
+/*
+ * SPL
+ */
+#define CONFIG_SPL
+#define CONFIG_SPL_TEXT_BASE 0xa1700000 /* IPL loads SPL here */
+#define CONFIG_SPL_STACK 0x5c040000 /* end of internal SRAM */
+#define CONFIG_SPL_NAND_SUPPORT /* build libnand for spl */
+#define CONFIG_SPL_NAND_DOCG4 /* use lean docg4 nand spl driver */
+#define CONFIG_SPL_LIBGENERIC_SUPPORT /* spl uses memcpy */
+
+/*
+ * NAND
+ */
+#define CONFIG_NAND_DOCG4
+#define CONFIG_SYS_NAND_SELF_INIT
+#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* only one device */
+#define CONFIG_SYS_NAND_BASE 0x00000000 /* mapped to reset vector */
+#define CONFIG_SYS_NAND_PAGE_SIZE 0x200
+#define CONFIG_SYS_NAND_BLOCK_SIZE 0x40000
+#define CONFIG_BITREVERSE /* needed by docg4 driver */
+#define CONFIG_BCH /* needed by docg4 driver */
+
+/*
+ * IMPORTANT NOTE: this is the size of the concatenated spl + u-boot image. It
+ * will be rounded up to the next 64k boundary (the spl flash block size), so it
+ * does not have to be exact, but you must ensure that it is not less than the
+ * actual image size, or it may fail to boot (bricked phone)!
+ * (Tip: reduces to three blocks with lcd and mmc support removed from u-boot.)
+*/
+#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x40000 /* four 64k flash blocks */
+
+/*
+ * This is the byte offset into the flash at which the concatenated spl + u-boot
+ * image is placed. It must be at the start of a block (256k boundary). Blocks
+ * 0 - 5 are write-protected, so we start at block 6.
+ */
+#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x180000 /* block 6 */
+
+/* DRAM address to which u-boot proper is loaded (before it relocates itself) */
+#define CONFIG_SYS_NAND_U_BOOT_DST 0xa0000000
+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST
+
+/* passed to linker by Makefile as arg to -Ttext option */
+#define CONFIG_SYS_TEXT_BASE 0xa0000000
+
+#define CONFIG_SYS_INIT_SP_ADDR 0x5c040000 /* end of internal SRAM */
+
+/*
+ * environment
+ */
+#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_BUILD_ENVCRC
+#define CONFIG_ENV_SIZE 0x200
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "stdin=usbtty\0" \
+ "stdout=usbtty\0" \
+ "stderr=usbtty"
+#define CONFIG_BOOTARGS "mtdparts=Msys_Diskonchip_G4:1536k(protected_part)ro,1024k(bootloader_part),-(filesys_part) \
+ip=192.168.11.102:::255.255.255.0:treo:usb0"
+#define CONFIG_BOOTDELAY 3
+
+#if 0 /* example: try 2nd mmc partition, then nand */
+#define CONFIG_BOOTCOMMAND \
+ "mmc rescan; " \
+ "if mmcinfo && ext2load mmc 0:2 0xa1000000 uImage; then " \
+ "bootm 0xa1000000; " \
+ "elif nand read 0xa1000000 0x280000 0x240000; then " \
+ "bootm 0xa1000000; " \
+ "fi; "
+#endif
+
+/* u-boot lives at end of SDRAM, so use start of SDRAM for stand alone apps */
+#define CONFIG_STANDALONE_LOAD_ADDR 0xa0000000
+
+#define CONFIG_SYS_DCACHE_OFF
+#define CONFIG_SYS_ICACHE_OFF
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/pcm051.h b/include/configs/pcm051.h
index 478f805..3480302 100644
--- a/include/configs/pcm051.h
+++ b/include/configs/pcm051.h
@@ -204,8 +204,14 @@
/* Defines for SPL */
#define CONFIG_SPL
#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_TEXT_BASE 0x402F0400
-#define CONFIG_SPL_MAX_SIZE (101 * 1024)
+/*
+ * Place the image at the start of the ROM defined image space and leave
+ * space for SRAM scratch entries (see arch/arm/include/omap_common.h).
+ * We limit our size to the ROM-defined downloaded image area, and use the
+ * rest of the space for stack.
+ */
+#define CONFIG_SPL_TEXT_BASE 0x402F0500
+#define CONFIG_SPL_MAX_SIZE (0x4030C000 - CONFIG_SPL_TEXT_BASE)
#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
#define CONFIG_SPL_BSS_START_ADDR 0x80000000
diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h
new file mode 100644
index 0000000..c13e983
--- /dev/null
+++ b/include/configs/sama5d3xek.h
@@ -0,0 +1,245 @@
+/*
+ * Configuation settings for the SAMA5D3xEK board.
+ *
+ * Copyright (C) 2012 - 2013 Atmel
+ *
+ * based on at91sam9m10g45ek.h by:
+ * Stelian Pop <stelian@popies.net>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/hardware.h>
+
+#define CONFIG_SYS_TEXT_BASE 0x26f00000
+
+/* ARM asynchronous clock */
+#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
+#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
+#define CONFIG_SYS_HZ 1000
+
+#define CONFIG_AT91FAMILY
+#define CONFIG_ARCH_CPU_INIT
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_DISPLAY_CPUINFO
+
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_OF_LIBFDT /* Device Tree support */
+
+/* general purpose I/O */
+#define CONFIG_AT91_GPIO
+
+/* serial console */
+#define CONFIG_ATMEL_USART
+#define CONFIG_USART_BASE ATMEL_BASE_DBGU
+#define CONFIG_USART_ID ATMEL_ID_DBGU
+
+/*
+ * This needs to be defined for the OHCI code to work but it is defined as
+ * ATMEL_ID_UHPHS in the CPU specific header files.
+ */
+#define ATMEL_ID_UHP ATMEL_ID_UHPHS
+
+/*
+ * Specify the clock enable bit in the PMC_SCER register.
+ */
+#define ATMEL_PMC_UHP AT91SAM926x_PMC_UHP
+
+/* LCD */
+#define CONFIG_LCD
+#define LCD_BPP LCD_COLOR16
+#define LCD_OUTPUT_BPP 24
+#define CONFIG_LCD_LOGO
+#undef LCD_TEST_PATTERN
+#define CONFIG_LCD_INFO
+#define CONFIG_LCD_INFO_BELOW_LOGO
+#define CONFIG_SYS_WHITE_ON_BLACK
+#define CONFIG_ATMEL_HLCD
+#define CONFIG_ATMEL_LCD_RGB565
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+
+/* board specific (not enough SRAM) */
+#define CONFIG_SAMA5D3_LCD_BASE 0x23E00000
+
+#define CONFIG_BOOTDELAY 3
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/* No NOR flash */
+#define CONFIG_SYS_NO_FLASH
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_IMI
+#undef CONFIG_CMD_LOADS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+
+/* SDRAM */
+#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS
+#define CONFIG_SYS_SDRAM_SIZE 0x20000000
+
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
+
+/* SerialFlash */
+#define CONFIG_CMD_SF
+
+#ifdef CONFIG_CMD_SF
+#define CONFIG_ATMEL_SPI
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_ATMEL
+#define CONFIG_SF_DEFAULT_SPEED 30000000
+#endif
+
+/* NAND flash */
+#define CONFIG_CMD_NAND
+
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_NAND_MAX_CHIPS 1
+#define CONFIG_NAND_ATMEL
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
+/* our ALE is AD21 */
+#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
+/* our CLE is AD22 */
+#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+/* PMECC & PMERRLOC */
+#define CONFIG_ATMEL_NAND_HWECC
+#define CONFIG_ATMEL_NAND_HW_PMECC
+#define CONFIG_PMECC_CAP 4
+#define CONFIG_PMECC_SECTOR_SIZE 512
+#define CONFIG_PMECC_INDEX_TABLE_OFFSET ATMEL_PMECC_INDEX_OFFSET_512
+#define CONFIG_CMD_NAND_TRIMFFS
+#endif
+
+/* Ethernet Hardware */
+#define CONFIG_MACB
+#define CONFIG_RMII
+#define CONFIG_NET_MULTI
+#define CONFIG_NET_RETRY_COUNT 20
+#define CONFIG_MACB_SEARCH_PHY
+
+/* MMC */
+#define CONFIG_CMD_MMC
+
+#ifdef CONFIG_CMD_MMC
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_GENERIC_ATMEL_MCI
+#define ATMEL_BASE_MMCI ATMEL_BASE_MCI0
+#endif
+
+/* USB */
+#define CONFIG_CMD_USB
+
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_ATMEL
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_SYS_USB_OHCI_CPU_INIT
+#define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_BASE_OHCI
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME "sama5d3"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 3
+#define CONFIG_DOS_PARTITION
+#define CONFIG_USB_STORAGE
+#endif
+
+#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
+#define CONFIG_CMD_FAT
+#endif
+
+#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
+
+#ifdef CONFIG_SYS_USE_SERIALFLASH
+/* bootstrap + u-boot + env + linux in serial flash */
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_OFFSET 0x5000
+#define CONFIG_ENV_SIZE 0x3000
+#define CONFIG_ENV_SECT_SIZE 0x1000
+#define CONFIG_BOOTCOMMAND "sf probe 0; " \
+ "sf read 0x22000000 0x42000 0x300000; " \
+ "bootm 0x22000000"
+#elif CONFIG_SYS_USE_NANDFLASH
+/* bootstrap + u-boot + env in nandflash */
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET 0xc0000
+#define CONFIG_ENV_OFFSET_REDUND 0x100000
+#define CONFIG_ENV_SIZE 0x20000
+#define CONFIG_BOOTCOMMAND "nand read 0x21000000 0x180000 0x80000;" \
+ "nand read 0x22000000 0x200000 0x600000;" \
+ "bootm 0x22000000 - 0x21000000"
+#elif CONFIG_SYS_USE_MMC
+/* bootstrap + u-boot + env in sd card */
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_OFFSET 0x2000
+#define CONFIG_ENV_SIZE 0x1000
+#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 dtb; " \
+ "fatload mmc 0:1 0x22000000 uImage; " \
+ "bootm 0x22000000 - 0x21000000"
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#else
+#define CONIG_ENV_IS_NOWHERE
+#endif
+
+#ifdef CONFIG_SYS_USE_MMC
+#define CONFIG_BOOTARGS \
+ "console=ttyS0,115200 earlyprintk " \
+ "root=/dev/mmcblk0p2 rw rootwait"
+#else
+#define CONFIG_BOOTARGS \
+ "console=ttyS0,115200 earlyprintk " \
+ "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \
+ "256K(env),256k(evn_redundent),256k(spare)," \
+ "512k(dtb),6M(kernel)ro,-(rootfs) " \
+ "rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs"
+#endif
+
+#define CONFIG_BAUDRATE 115200
+
+#define CONFIG_SYS_PROMPT "U-Boot> "
+#define CONFIG_SYS_CBSIZE 256
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_HUSH_PARSER
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (1024 * 1024)
+
+#endif
diff --git a/include/configs/smdkv310.h b/include/configs/smdkv310.h
index b796b46..0f04597 100644
--- a/include/configs/smdkv310.h
+++ b/include/configs/smdkv310.h
@@ -36,6 +36,7 @@
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_BOARD_EARLY_INIT_F
/* Mach Type */
#define CONFIG_MACH_TYPE MACH_TYPE_SMDKV310
@@ -57,6 +58,7 @@
/* Handling Sleep Mode*/
#define S5P_CHECK_SLEEP 0x00000BAD
#define S5P_CHECK_DIDLE 0xBAD00000
+#define S5P_CHECK_LPA 0xABAD0000
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20))
@@ -93,8 +95,11 @@
/* MMC SPL */
#define CONFIG_SPL
+#define CONFIG_SKIP_LOWLEVEL_INIT
#define COPY_BL2_FNPTR_ADDR 0x00002488
+#define CONFIG_SPL_TEXT_BASE 0x02021410
+
#define CONFIG_BOOTCOMMAND "fatload mmc 0 40007000 uImage; bootm 40007000"
/* Miscellaneous configurable options */
@@ -144,7 +149,10 @@
#define CONFIG_ENV_OFFSET (RESERVE_BLOCK_SIZE + BL1_SIZE)
#define CONFIG_DOS_PARTITION 1
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SPL_LDSCRIPT "board/samsung/common/exynos-uboot-spl.lds"
+#define CONFIG_SPL_MAX_FOOTPRINT (14 * 1024)
+
+#define CONFIG_SYS_INIT_SP_ADDR 0x02040000
/* U-boot copy size from boot Media to DRAM.*/
#define COPY_BL2_SIZE 0x80000
diff --git a/include/configs/sorcery.h b/include/configs/sorcery.h
deleted file mode 100644
index f67898e..0000000
--- a/include/configs/sorcery.h
+++ /dev/null
@@ -1,298 +0,0 @@
-/*
- * (C) Copyright 2004
- * TsiChung Liew, Freescale Software Engineering, Tsi-Chung.Liew@freescale.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_MPC8220 1
-#define CONFIG_SORCERY 1 /* Sorcery board */
-
-#define CONFIG_SYS_TEXT_BASE 0xfff00000
-
-#define CONFIG_HIGH_BATS 1 /* High BATs supported */
-
-/* Input clock running at 60Mhz, read Hid1 for the CPU multiplier to
- determine the CPU speed. */
-#define CONFIG_SYS_MPC8220_CLKIN 60000000 /* ... running at 60MHz */
-#define CONFIG_SYS_MPC8220_SYSPLL_VCO_MULTIPLIER 8 /* VCO multiplier can't be read from any register */
-
-/*
- * Serial console configuration
- */
-#define CONFIG_PSC_CONSOLE 1 /* console is on PSC */
-
-#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
-
-/* PCI */
-#define CONFIG_PCI 1
-#define CONFIG_PCI_PNP 1
-
-#define CONFIG_PCI_MEM_BUS 0x80000000
-#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
-#define CONFIG_PCI_MEM_SIZE 0x10000000
-
-#define CONFIG_PCI_IO_BUS 0x71000000
-#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
-#define CONFIG_PCI_IO_SIZE 0x01000000
-
-#define CONFIG_PCI_CFG_BUS 0x70000000
-#define CONFIG_PCI_CFG_PHYS CONFIG_PCI_CFG_BUS
-#define CONFIG_PCI_CFG_SIZE 0x01000000
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_BOOTD
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_SNTP
-
-
-/*
- * Default Environment
- */
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#define CONFIG_HOSTNAME sorcery
-
-#define CONFIG_PREBOOT "echo;" \
- "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
- "echo"
-
-#undef CONFIG_BOOTARGS
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=eth0\0" \
- "nfsargs=setenv bootargs root=/dev/nfs rw " \
- "nfsroot=$serverip:$rootpath\0" \
- "ramargs=setenv bootargs root=/dev/ram rw\0" \
- "addip=setenv bootargs $bootargs " \
- "ip=$ipaddr:$serverip:$gatewayip:$netmask" \
- ":$hostname:$netdev:off panic=1\0" \
- "flash_nfs=run nfsargs addip;" \
- "bootm $kernel_addr\0" \
- "flash_self=run ramargs addip;" \
- "bootm $kernel_addr $ramdisk_addr\0" \
- "net_nfs=tftp 200000 $bootfile;run nfsargs addip;bootm\0" \
- "rootpath=/opt/eldk/ppc_82xx\0" \
- "bootfile=/tftpboot/sorcery/uImage\0" \
- "kernel_addr=FFE00000\0" \
- "ramdisk_addr=FFB00000\0" \
- ""
-#define CONFIG_BOOTCOMMAND "run flash_self"
-
-#define CONFIG_TIMESTAMP /* Print image info with timestamp */
-
-#define CONFIG_EEPRO100
-
-/*
- * I2C configuration
- */
-#define CONFIG_HARD_I2C 1
-#define CONFIG_SYS_I2C_MODULE 1
-#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */
-#define CONFIG_SYS_I2C_SLAVE 0x7F
-
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
-/*
- * Flexbus Chipselect configuration
- * Beware: Some CS# seem to be mandatory (if these CS# are not set,
- * board can hang-up in unpredictable place).
- * Sorcery_Memory_Map v0.3 is possibly wrong with CPLD CS#
- */
-
-/* Flash */
-#define CONFIG_SYS_CS0_BASE 0xf800
-#define CONFIG_SYS_CS0_MASK 0x08000000 /* 128 MB (two chips) */
-#define CONFIG_SYS_CS0_CTRL 0x001019c0
-
-/* NVM */
-#define CONFIG_SYS_CS1_BASE 0xf7e8
-#define CONFIG_SYS_CS1_MASK 0x00040000 /* 256K */
-#define CONFIG_SYS_CS1_CTRL 0x00101940 /* 8bit port size */
-
-/* Atlas2 + Gemini */
-#define CONFIG_SYS_CS2_BASE 0xf7e7
-#define CONFIG_SYS_CS2_MASK 0x00010000 /* 64K*/
-#define CONFIG_SYS_CS2_CTRL 0x001011c0 /* 16bit port size */
-
-/* CAN Controller */
-#define CONFIG_SYS_CS3_BASE 0xf7e6
-#define CONFIG_SYS_CS3_MASK 0x00010000 /* 64K */
-#define CONFIG_SYS_CS3_CTRL 0x00102140 /* 8Bit port size */
-
-/* Foreign interface */
-#define CONFIG_SYS_CS4_BASE 0xf7e5
-#define CONFIG_SYS_CS4_MASK 0x00010000 /* 64K */
-#define CONFIG_SYS_CS4_CTRL 0x00101dc0 /* 16bit port size */
-
-/* CPLD */
-#define CONFIG_SYS_CS5_BASE 0xf7e4
-#define CONFIG_SYS_CS5_MASK 0x00010000 /* 64K */
-#define CONFIG_SYS_CS5_CTRL 0x001000c0 /* 16bit port size */
-
-#define CONFIG_SYS_FLASH0_BASE (CONFIG_SYS_CS0_BASE << 16)
-#define CONFIG_SYS_FLASH_BASE (CONFIG_SYS_FLASH0_BASE)
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max num of flash banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */
-
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, \
- CONFIG_SYS_FLASH_BASE+0x04000000 } /* two banks */
-
-/*
- * Environment settings
- */
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x8000000 - 0x40000)
-#define CONFIG_ENV_SIZE 0x4000 /* 16K */
-#define CONFIG_ENV_SECT_SIZE 0x20000
-#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + 0x20000)
-#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
-
-#define CONFIG_ENV_OVERWRITE 1
-
-#if defined CONFIG_ENV_IS_IN_FLASH
-#undef CONFIG_ENV_IS_IN_NVRAM
-#undef CONFIG_ENV_IS_IN_EEPROM
-#elif defined CONFIG_ENV_IS_IN_NVRAM
-#undef CONFIG_ENV_IS_IN_FLASH
-#undef CONFIG_ENV_IS_IN_EEPROM
-#elif defined CONFIG_ENV_IS_IN_EEPROM
-#undef CONFIG_ENV_IS_IN_NVRAM
-#undef CONFIG_ENV_IS_IN_FLASH
-#endif
-
-/*
- * Memory map
- */
-#define CONFIG_SYS_MBAR 0xF0000000
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_DEFAULT_MBAR 0x80000000
-#define CONFIG_SYS_SRAM_BASE (CONFIG_SYS_MBAR + 0x20000)
-#define CONFIG_SYS_SRAM_SIZE 0x8000
-
-/* Use SRAM until RAM will be available */
-#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_MBAR + 0x20000)
-#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in DPRAM */
-
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-# define CONFIG_SYS_RAMBOOT 1
-#endif
-
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-/* SDRAM configuration (for SPD) */
-#define CONFIG_SYS_SDRAM_TOTAL_BANKS 1
-#define CONFIG_SYS_SDRAM_SPD_I2C_ADDR 0x50 /* 7bit */
-#define CONFIG_SYS_SDRAM_SPD_SIZE 0x100
-#define CONFIG_SYS_SDRAM_CAS_LATENCY 5 /* (CL=2.5)x2 */
-
-/* SDRAM drive strength register (for SSTL_2 class II)*/
-#define CONFIG_SYS_SDRAM_DRIVE_STRENGTH ((DRIVE_STRENGTH_HIGH << SDRAMDS_SBE_SHIFT) | \
- (DRIVE_STRENGTH_HIGH << SDRAMDS_SBC_SHIFT) | \
- (DRIVE_STRENGTH_HIGH << SDRAMDS_SBA_SHIFT) | \
- (DRIVE_STRENGTH_HIGH << SDRAMDS_SBS_SHIFT) | \
- (DRIVE_STRENGTH_HIGH << SDRAMDS_SBD_SHIFT))
-
-/*
- * Ethernet configuration
- */
-#define CONFIG_MPC8220_FEC 1
-#define CONFIG_FEC_10MBIT 1 /* Workaround for FEC 100Mbit problem */
-#define CONFIG_PHY_ADDR 0x1F
-#define CONFIG_MII 1
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
-#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8220 CPUs */
-#if defined(CONFIG_CMD_KGDB)
-# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
-/*
- * Various low-level settings
- */
-#define CONFIG_SYS_HID0_INIT 0
-#define CONFIG_SYS_HID0_FINAL 0
-
-/*
-#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
-#define CONFIG_SYS_HID0_FINAL HID0_ICE
-*/
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h
index 2c665b8..fa1dcc3 100644
--- a/include/configs/t4qds.h
+++ b/include/configs/t4qds.h
@@ -29,13 +29,14 @@
#ifdef CONFIG_RAMBOOT_PBL
#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
+#define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/freescale/t4qds/t4_pbi.cfg
+#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/t4qds/t4_rcw.cfg
#endif
#define CONFIG_CMD_REGINFO
/* High Level Configuration Options */
#define CONFIG_BOOKE
-#define CONFIG_E6500
#define CONFIG_E500 /* BOOKE e500 family */
#define CONFIG_E500MC /* BOOKE e500mc family */
#define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */
@@ -444,11 +445,19 @@
#define I2C_MUX_PCA_ADDR_PRI 0x77 /* I2C bus multiplexer,primary */
#define I2C_MUX_PCA_ADDR_SEC 0x76 /* I2C bus multiplexer,secondary */
-/* VSC Crossbar switches */
-#define CONFIG_VSC_CROSSBAR
#define I2C_MUX_CH_DEFAULT 0x8
+#define I2C_MUX_CH_VOL_MONITOR 0xa
#define I2C_MUX_CH_VSC3316_FS 0xc
#define I2C_MUX_CH_VSC3316_BS 0xd
+
+/* Voltage monitor on channel 2*/
+#define I2C_VOL_MONITOR_ADDR 0x40
+#define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2
+#define I2C_VOL_MONITOR_BUS_V_OVF 0x1
+#define I2C_VOL_MONITOR_BUS_V_SHIFT 3
+
+/* VSC Crossbar switches */
+#define CONFIG_VSC_CROSSBAR
#define VSC3316_FSM_TX_ADDR 0x70
#define VSC3316_FSM_RX_ADDR 0x71
@@ -504,7 +513,7 @@
*/
#define CONFIG_FSL_ESPI
#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_SPANSION
+#define CONFIG_SPI_FLASH_SST
#define CONFIG_CMD_SF
#define CONFIG_SF_DEFAULT_SPEED 10000000
#define CONFIG_SF_DEFAULT_MODE 0
@@ -641,15 +650,10 @@
#define SGMII_CARD_PORT2_PHY_ADDR 0x1D
#define SGMII_CARD_PORT3_PHY_ADDR 0x1E
#define SGMII_CARD_PORT4_PHY_ADDR 0x1F
-#define XFI_CARD_PORT1_PHY_ADDR 0x1 /* tmp, FIXME below addr */
-#define XFI_CARD_PORT2_PHY_ADDR 0x2
-#define XFI_CARD_PORT3_PHY_ADDR 0x3
-#define XFI_CARD_PORT4_PHY_ADDR 0x4
-#define QSGMII_CARD_PHY_ADDR 0x5
-#define FM1_10GEC1_PHY_ADDR 0x6
-#define FM1_10GEC2_PHY_ADDR 0x7
-#define FM2_10GEC1_PHY_ADDR 0x8
-#define FM2_10GEC2_PHY_ADDR 0x9
+#define FM1_10GEC1_PHY_ADDR 0x0
+#define FM1_10GEC2_PHY_ADDR 0x1
+#define FM2_10GEC1_PHY_ADDR 0x2
+#define FM2_10GEC2_PHY_ADDR 0x3
#endif
#ifdef CONFIG_PCI
@@ -783,8 +787,21 @@
#define __USB_PHY_TYPE utmi
+/*
+ * T4240 has 3 DDR controllers. Default to 3way_4KB interleaving. It can be
+ * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to
+ * cacheline interleaving. It can be cacheline, page, bank, superbank.
+ * See doc/README.fsl-ddr for details.
+ */
+#ifdef CONFIG_PPC_T4240
+#define CTRL_INTLV_PREFERED 3way_4KB
+#else
+#define CTRL_INTLV_PREFERED cacheline
+#endif
+
#define CONFIG_EXTRA_ENV_SETTINGS \
- "hwconfig=fsl_ddr:ctlr_intlv=3way_4KB," \
+ "hwconfig=fsl_ddr:" \
+ "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) "," \
"bank_intlv=auto;" \
"usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
"netdev=eth0\0" \
diff --git a/include/configs/tegra-common-post.h b/include/configs/tegra-common-post.h
index bf18699..6ed2fde 100644
--- a/include/configs/tegra-common-post.h
+++ b/include/configs/tegra-common-post.h
@@ -157,6 +157,8 @@
/* overrides for SPL build here */
#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SKIP_LOWLEVEL_INIT
+
/* remove devicetree support */
#ifdef CONFIG_OF_CONTROL
#undef CONFIG_OF_CONTROL
diff --git a/include/configs/tegra114-common.h b/include/configs/tegra114-common.h
index c2986d8..44e98e5 100644
--- a/include/configs/tegra114-common.h
+++ b/include/configs/tegra114-common.h
@@ -74,9 +74,10 @@
#define CONFIG_SYS_SPL_MALLOC_START 0x80090000
#define CONFIG_SPL_STACK 0x800ffffc
-#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/tegra114/u-boot-spl.lds"
-
/* Total I2C ports on Tegra114 */
#define TEGRA_I2C_NUM_CONTROLLERS 5
+/* For USB EHCI controller */
+#define CONFIG_EHCI_IS_TDI
+
#endif /* _TEGRA114_COMMON_H_ */
diff --git a/include/configs/tegra20-common.h b/include/configs/tegra20-common.h
index 395a657..d5abecb 100644
--- a/include/configs/tegra20-common.h
+++ b/include/configs/tegra20-common.h
@@ -88,8 +88,6 @@
#define CONFIG_SYS_SPL_MALLOC_START 0x00090000
#define CONFIG_SPL_STACK 0x000ffffc
-#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/tegra20/u-boot-spl.lds"
-
/* Align LCD to 1MB boundary */
#define CONFIG_LCD_ALIGNMENT MMU_SECTION_SIZE
diff --git a/include/configs/tegra30-common.h b/include/configs/tegra30-common.h
index f6c07c6..7ea36be 100644
--- a/include/configs/tegra30-common.h
+++ b/include/configs/tegra30-common.h
@@ -87,9 +87,10 @@
#define CONFIG_SYS_SPL_MALLOC_START 0x80090000
#define CONFIG_SPL_STACK 0x800ffffc
-#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/tegra30/u-boot-spl.lds"
-
/* Total I2C ports on Tegra30 */
#define TEGRA_I2C_NUM_CONTROLLERS 5
+/* For USB EHCI controller */
+#define CONFIG_EHCI_IS_TDI
+
#endif /* _TEGRA30_COMMON_H_ */
diff --git a/include/configs/trats.h b/include/configs/trats.h
index fd58558..103295e 100644
--- a/include/configs/trats.h
+++ b/include/configs/trats.h
@@ -66,7 +66,7 @@
#define CONFIG_MACH_TYPE MACH_TYPE_TRATS
/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20))
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (16 << 20))
/* select serial console configuration */
#define CONFIG_SERIAL2 /* use SERIAL 2 */
@@ -146,7 +146,8 @@
#define CONFIG_DFU_ALT \
"u-boot mmc 80 400;" \
- "uImage ext4 0 2\0" \
+ "uImage ext4 0 2;" \
+ "exynos4210-trats.dtb ext4 0 2\0"
#define CONFIG_ENV_OVERWRITE
#define CONFIG_SYS_CONSOLE_INFO_QUIET
@@ -154,7 +155,7 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"bootk=" \
- "run loaduimage; bootm 0x40007FC0\0" \
+ "run loaddtb; run loaduimage; bootm 0x40007FC0 - ${fdtaddr}\0" \
"updatemmc=" \
"mmc boot 0 1 1 1; mmc write 0 0x42008000 0 0x200;" \
"mmc boot 0 1 1 0\0" \
@@ -177,7 +178,7 @@
"mmcboot=" \
"setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
"${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \
- "run loaduimage; bootm 0x40007FC0\0" \
+ "run loaddtb; run loaduimage; bootm 0x40007FC0 - ${fdtaddr}\0" \
"bootchart=setenv opts init=/sbin/bootchartd; run bootcmd\0" \
"boottrace=setenv opts initcall_debug; run bootcmd\0" \
"mmcoops=mmc read 0 0x40000000 0x40 8; md 0x40000000 0x400\0" \
@@ -188,6 +189,8 @@
"nfsroot=/nfsroot/arm\0" \
"bootblock=" CONFIG_BOOTBLOCK "\0" \
"loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 uImage\0" \
+ "loaddtb=ext4load mmc ${mmcdev}:${mmcbootpart} ${fdtaddr}" \
+ "${fdtfile}\0" \
"mmcdev=0\0" \
"mmcbootpart=2\0" \
"mmcrootpart=5\0" \
@@ -212,7 +215,10 @@
" /${splfile} ${spl_imgaddr} ${spl_imgsize};" \
"setenv spl_imgsize;" \
"setenv spl_imgaddr;" \
- "setenv spl_addr_tmp;\0"
+ "setenv spl_addr_tmp;\0" \
+ "fdtaddr=40800000\0" \
+ "fdtfile=exynos4210-trats.dtb\0"
+
/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP /* undef to save memory */
@@ -322,4 +328,7 @@
#define CONFIG_USB_GADGET_MASS_STORAGE
#endif
+/* Pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT 1
+
#endif /* __CONFIG_H */
diff --git a/include/configs/ventana.h b/include/configs/ventana.h
index 5755f11..64e7875 100644
--- a/include/configs/ventana.h
+++ b/include/configs/ventana.h
@@ -43,6 +43,7 @@
#define CONFIG_MACH_TYPE MACH_TYPE_VENTANA
#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_LATE_INIT /* Make sure LCD init is complete */
/* SD/MMC */
#define CONFIG_MMC
@@ -73,6 +74,14 @@
/* USB keyboard */
#define CONFIG_USB_KEYBOARD
+/* LCD support */
+#define CONFIG_LCD
+#define CONFIG_PWM_TEGRA
+#define CONFIG_VIDEO_TEGRA
+#define LCD_BPP LCD_COLOR16
+#define CONFIG_SYS_WHITE_ON_BLACK
+#define CONFIG_CONSOLE_SCROLL_LINES 10
+
#include "tegra-common-post.h"
#endif /* __CONFIG_H */
diff --git a/include/configs/vexpress_ca15_tc2.h b/include/configs/vexpress_ca15_tc2.h
new file mode 100644
index 0000000..9e230ad
--- /dev/null
+++ b/include/configs/vexpress_ca15_tc2.h
@@ -0,0 +1,36 @@
+/*
+ * (C) Copyright 2013 Linaro
+ * Andre Przywara, <andre.przywara@linaro.org>
+ *
+ * Configuration for Versatile Express. Parts were derived from other ARM
+ * configurations.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __VEXPRESS_CA15X2_TC2_h
+#define __VEXPRESS_CA15X2_TC2_h
+
+#define CONFIG_VEXPRESS_EXTENDED_MEMORY_MAP
+#include "vexpress_common.h"
+#define CONFIG_BOOTP_VCI_STRING "U-boot.armv7.vexpress_ca15x2_tc2"
+
+#define CONFIG_SYS_CLK_FREQ 24000000
+
+#endif
diff --git a/include/configs/vexpress_ca5x2.h b/include/configs/vexpress_ca5x2.h
new file mode 100644
index 0000000..9331134
--- /dev/null
+++ b/include/configs/vexpress_ca5x2.h
@@ -0,0 +1,34 @@
+/*
+ * (C) Copyright 2011 Linaro
+ * Ryan Harkin, <ryan.harkin@linaro.org>
+ *
+ * Configuration for Versatile Express. Parts were derived from other ARM
+ * configurations.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __VEXPRESS_CA5X2_h
+#define __VEXPRESS_CA5X2_h
+
+#define CONFIG_VEXPRESS_EXTENDED_MEMORY_MAP
+#include "vexpress_common.h"
+#define CONFIG_BOOTP_VCI_STRING "U-boot.armv7.vexpress_ca5x2"
+
+#endif /* __VEXPRESS_CA5X2_h */
diff --git a/include/configs/vexpress_ca9x4.h b/include/configs/vexpress_ca9x4.h
new file mode 100644
index 0000000..c3b6986
--- /dev/null
+++ b/include/configs/vexpress_ca9x4.h
@@ -0,0 +1,34 @@
+/*
+ * (C) Copyright 2011 Linaro
+ * Ryan Harkin, <ryan.harkin@linaro.org>
+ *
+ * Configuration for Versatile Express. Parts were derived from other ARM
+ * configurations.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __VEXPRESS_CA9X4_H
+#define __VEXPRESS_CA9X4_H
+
+#define CONFIG_VEXPRESS_ORIGINAL_MEMORY_MAP
+#include "vexpress_common.h"
+#define CONFIG_BOOTP_VCI_STRING "U-boot.armv7.vexpress_ca9x4"
+
+#endif /* VEXPRESS_CA9X4_H */
diff --git a/include/configs/vexpress_common.h b/include/configs/vexpress_common.h
new file mode 100644
index 0000000..3c5683a
--- /dev/null
+++ b/include/configs/vexpress_common.h
@@ -0,0 +1,315 @@
+/*
+ * (C) Copyright 2011 ARM Limited
+ * (C) Copyright 2010 Linaro
+ * Matt Waddel, <matt.waddel@linaro.org>
+ *
+ * Configuration for Versatile Express. Parts were derived from other ARM
+ * configurations.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __VEXPRESS_COMMON_H
+#define __VEXPRESS_COMMON_H
+
+/*
+ * Definitions copied from linux kernel:
+ * arch/arm/mach-vexpress/include/mach/motherboard.h
+ */
+#ifdef CONFIG_VEXPRESS_ORIGINAL_MEMORY_MAP
+/* CS register bases for the original memory map. */
+#define V2M_PA_CS0 0x40000000
+#define V2M_PA_CS1 0x44000000
+#define V2M_PA_CS2 0x48000000
+#define V2M_PA_CS3 0x4c000000
+#define V2M_PA_CS7 0x10000000
+
+#define V2M_PERIPH_OFFSET(x) (x << 12)
+#define V2M_SYSREGS (V2M_PA_CS7 + V2M_PERIPH_OFFSET(0))
+#define V2M_SYSCTL (V2M_PA_CS7 + V2M_PERIPH_OFFSET(1))
+#define V2M_SERIAL_BUS_PCI (V2M_PA_CS7 + V2M_PERIPH_OFFSET(2))
+
+#define V2M_BASE 0x60000000
+#define CONFIG_SYS_TEXT_BASE 0x60800000
+#elif defined(CONFIG_VEXPRESS_EXTENDED_MEMORY_MAP)
+/* CS register bases for the extended memory map. */
+#define V2M_PA_CS0 0x08000000
+#define V2M_PA_CS1 0x0c000000
+#define V2M_PA_CS2 0x14000000
+#define V2M_PA_CS3 0x18000000
+#define V2M_PA_CS7 0x1c000000
+
+#define V2M_PERIPH_OFFSET(x) (x << 16)
+#define V2M_SYSREGS (V2M_PA_CS7 + V2M_PERIPH_OFFSET(1))
+#define V2M_SYSCTL (V2M_PA_CS7 + V2M_PERIPH_OFFSET(2))
+#define V2M_SERIAL_BUS_PCI (V2M_PA_CS7 + V2M_PERIPH_OFFSET(3))
+
+#define V2M_BASE 0x80000000
+#define CONFIG_SYS_TEXT_BASE 0x80800000
+#endif
+
+/*
+ * Physical addresses, offset from V2M_PA_CS0-3
+ */
+#define V2M_NOR0 (V2M_PA_CS0)
+#define V2M_NOR1 (V2M_PA_CS1)
+#define V2M_SRAM (V2M_PA_CS2)
+#define V2M_VIDEO_SRAM (V2M_PA_CS3 + 0x00000000)
+#define V2M_LAN9118 (V2M_PA_CS3 + 0x02000000)
+#define V2M_ISP1761 (V2M_PA_CS3 + 0x03000000)
+
+/* Common peripherals relative to CS7. */
+#define V2M_AACI (V2M_PA_CS7 + V2M_PERIPH_OFFSET(4))
+#define V2M_MMCI (V2M_PA_CS7 + V2M_PERIPH_OFFSET(5))
+#define V2M_KMI0 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(6))
+#define V2M_KMI1 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(7))
+
+#define V2M_UART0 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(9))
+#define V2M_UART1 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(10))
+#define V2M_UART2 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(11))
+#define V2M_UART3 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(12))
+
+#define V2M_WDT (V2M_PA_CS7 + V2M_PERIPH_OFFSET(15))
+
+#define V2M_TIMER01 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(17))
+#define V2M_TIMER23 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(18))
+
+#define V2M_SERIAL_BUS_DVI (V2M_PA_CS7 + V2M_PERIPH_OFFSET(22))
+#define V2M_RTC (V2M_PA_CS7 + V2M_PERIPH_OFFSET(23))
+
+#define V2M_CF (V2M_PA_CS7 + V2M_PERIPH_OFFSET(26))
+
+#define V2M_CLCD (V2M_PA_CS7 + V2M_PERIPH_OFFSET(31))
+#define V2M_SIZE_CS7 V2M_PERIPH_OFFSET(32)
+
+/* System register offsets. */
+#define V2M_SYS_CFGDATA (V2M_SYSREGS + 0x0a0)
+#define V2M_SYS_CFGCTRL (V2M_SYSREGS + 0x0a4)
+#define V2M_SYS_CFGSTAT (V2M_SYSREGS + 0x0a8)
+
+/*
+ * Configuration
+ */
+#define SYS_CFG_START (1 << 31)
+#define SYS_CFG_WRITE (1 << 30)
+#define SYS_CFG_OSC (1 << 20)
+#define SYS_CFG_VOLT (2 << 20)
+#define SYS_CFG_AMP (3 << 20)
+#define SYS_CFG_TEMP (4 << 20)
+#define SYS_CFG_RESET (5 << 20)
+#define SYS_CFG_SCC (6 << 20)
+#define SYS_CFG_MUXFPGA (7 << 20)
+#define SYS_CFG_SHUTDOWN (8 << 20)
+#define SYS_CFG_REBOOT (9 << 20)
+#define SYS_CFG_DVIMODE (11 << 20)
+#define SYS_CFG_POWER (12 << 20)
+#define SYS_CFG_SITE_MB (0 << 16)
+#define SYS_CFG_SITE_DB1 (1 << 16)
+#define SYS_CFG_SITE_DB2 (2 << 16)
+#define SYS_CFG_STACK(n) ((n) << 12)
+
+#define SYS_CFG_ERR (1 << 1)
+#define SYS_CFG_COMPLETE (1 << 0)
+
+/* Board info register */
+#define SYS_ID V2M_SYSREGS
+#define CONFIG_REVISION_TAG 1
+
+#define CONFIG_SYS_MEMTEST_START V2M_BASE
+#define CONFIG_SYS_MEMTEST_END 0x20000000
+#define CONFIG_SYS_HZ 1000
+
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_SYS_L2CACHE_OFF 1
+#define CONFIG_INITRD_TAG 1
+
+#define CONFIG_OF_LIBFDT 1
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
+
+#define SCTL_BASE V2M_SYSCTL
+#define VEXPRESS_FLASHPROG_FLVPPEN (1 << 0)
+
+/* SMSC9115 Ethernet from SMSC9118 family */
+#define CONFIG_SMC911X 1
+#define CONFIG_SMC911X_32_BIT 1
+#define CONFIG_SMC911X_BASE V2M_LAN9118
+
+/* PL011 Serial Configuration */
+#define CONFIG_PL011_SERIAL
+#define CONFIG_PL011_CLOCK 24000000
+#define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0, \
+ (void *)CONFIG_SYS_SERIAL1}
+#define CONFIG_CONS_INDEX 0
+
+#define CONFIG_BAUDRATE 38400
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_SERIAL0 V2M_UART0
+#define CONFIG_SYS_SERIAL1 V2M_UART1
+
+/* Command line configuration */
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PXE
+#define CONFIG_MENU
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SAVEENV
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_SUPPORT_RAW_INITRD
+
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION 1
+#define CONFIG_MMC 1
+#define CONFIG_CMD_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_ARM_PL180_MMCI
+#define CONFIG_ARM_PL180_MMCI_BASE V2M_MMCI
+#define CONFIG_SYS_MMC_MAX_BLK_COUNT 127
+#define CONFIG_ARM_PL180_MMCI_CLOCK_FREQ 6250000
+
+/* BOOTP options */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_PXE
+#define CONFIG_BOOTP_PXE_CLIENTARCH 0x100
+
+/* Miscellaneous configurable options */
+#undef CONFIG_SYS_CLKS_IN_HZ
+#define CONFIG_SYS_LOAD_ADDR (V2M_BASE + 0x8000)
+#define LINUX_BOOT_PARAM_ADDR (V2M_BASE + 0x2000)
+#define CONFIG_BOOTDELAY 2
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS 2
+#define PHYS_SDRAM_1 (V2M_BASE) /* SDRAM Bank #1 */
+#define PHYS_SDRAM_2 (((unsigned int)V2M_BASE) + \
+ ((unsigned int)0x20000000))
+#define PHYS_SDRAM_1_SIZE 0x20000000 /* 512 MB */
+#define PHYS_SDRAM_2_SIZE 0x20000000 /* 512 MB */
+
+/* additions for new relocation code */
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + \
+ CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_GBL_DATA_OFFSET
+
+/* Basic environment settings */
+#define CONFIG_BOOTCOMMAND "run bootflash;"
+#ifdef CONFIG_VEXPRESS_ORIGINAL_MEMORY_MAP
+#define CONFIG_PLATFORM_ENV_SETTINGS \
+ "loadaddr=0x80008000\0" \
+ "ramdisk_addr_r=0x61000000\0" \
+ "kernel_addr=0x44100000\0" \
+ "ramdisk_addr=0x44800000\0" \
+ "maxramdisk=0x1800000\0" \
+ "pxefile_addr_r=0x88000000\0" \
+ "kernel_addr_r=0x80008000\0"
+#elif defined(CONFIG_VEXPRESS_EXTENDED_MEMORY_MAP)
+#define CONFIG_PLATFORM_ENV_SETTINGS \
+ "loadaddr=0xa0008000\0" \
+ "ramdisk_addr_r=0x81000000\0" \
+ "kernel_addr=0x0c100000\0" \
+ "ramdisk_addr=0x0c800000\0" \
+ "maxramdisk=0x1800000\0" \
+ "pxefile_addr_r=0xa8000000\0" \
+ "kernel_addr_r=0xa0008000\0"
+#endif
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ CONFIG_PLATFORM_ENV_SETTINGS \
+ "console=ttyAMA0,38400n8\0" \
+ "dram=1024M\0" \
+ "root=/dev/sda1 rw\0" \
+ "mtd=armflash:1M@0x800000(uboot),7M@0x1000000(kernel)," \
+ "24M@0x2000000(initrd)\0" \
+ "flashargs=setenv bootargs root=${root} console=${console} " \
+ "mem=${dram} mtdparts=${mtd} mmci.fmax=190000 " \
+ "devtmpfs.mount=0 vmalloc=256M\0" \
+ "bootflash=run flashargs; " \
+ "cp ${ramdisk_addr} ${ramdisk_addr_r} ${maxramdisk}; " \
+ "bootm ${kernel_addr} ${ramdisk_addr_r}\0"
+
+/* FLASH and environment organization */
+#define PHYS_FLASH_SIZE 0x04000000 /* 64MB */
+#define CONFIG_SYS_FLASH_CFI 1
+#define CONFIG_FLASH_CFI_DRIVER 1
+#define CONFIG_SYS_FLASH_SIZE 0x04000000
+#define CONFIG_SYS_MAX_FLASH_BANKS 2
+#define CONFIG_SYS_FLASH_BASE0 V2M_NOR0
+#define CONFIG_SYS_FLASH_BASE1 V2M_NOR1
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE0
+
+/* Timeout values in ticks */
+#define CONFIG_SYS_FLASH_ERASE_TOUT (2 * CONFIG_SYS_HZ) /* Erase Timeout */
+#define CONFIG_SYS_FLASH_WRITE_TOUT (2 * CONFIG_SYS_HZ) /* Write Timeout */
+
+/* 255 0x40000 sectors + first or last sector may have 4 erase regions = 259 */
+#define CONFIG_SYS_MAX_FLASH_SECT 259 /* Max sectors */
+#define FLASH_MAX_SECTOR_SIZE 0x00040000 /* 256 KB sectors */
+
+/* Room required on the stack for the environment data */
+#define CONFIG_ENV_SIZE FLASH_MAX_SECTOR_SIZE
+
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* use buffered writes */
+
+/*
+ * Amount of flash used for environment:
+ * We don't know which end has the small erase blocks so we use the penultimate
+ * sector location for the environment
+ */
+#define CONFIG_ENV_SECT_SIZE FLASH_MAX_SECTOR_SIZE
+#define CONFIG_ENV_OVERWRITE 1
+
+/* Store environment at top of flash */
+#define CONFIG_ENV_IS_IN_FLASH 1
+#define CONFIG_ENV_OFFSET (PHYS_FLASH_SIZE - \
+ (2 * CONFIG_ENV_SECT_SIZE))
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE1 + \
+ CONFIG_ENV_OFFSET)
+#define CONFIG_SYS_FLASH_PROTECTION /* The devices have real protection */
+#define CONFIG_SYS_FLASH_EMPTY_INFO /* flinfo indicates empty blocks */
+#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE0, \
+ CONFIG_SYS_FLASH_BASE1 }
+
+/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PROMPT "VExpress# "
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_HUSH_PARSER
+
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */
+#define CONFIG_CMD_SOURCE
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING 1
+#define CONFIG_SYS_MAXARGS 16 /* max command args */
+
+#endif /* VEXPRESS_COMMON_H */
diff --git a/include/dwmmc.h b/include/dwmmc.h
index c8b1d40..e142f3e 100644
--- a/include/dwmmc.h
+++ b/include/dwmmc.h
@@ -123,6 +123,8 @@
#define MSIZE(x) ((x) << 28)
#define RX_WMARK(x) ((x) << 16)
#define TX_WMARK(x) (x)
+#define RX_WMARK_SHIFT 16
+#define RX_WMARK_MASK (0xfff << RX_WMARK_SHIFT)
#define DWMCI_IDMAC_OWN (1 << 31)
#define DWMCI_IDMAC_CH (1 << 4)
@@ -144,6 +146,7 @@
unsigned int bus_hz;
int dev_index;
int buswidth;
+ u32 clksel_val;
u32 fifoth_val;
struct mmc *mmc;
diff --git a/include/ext4fs.h b/include/ext4fs.h
index 025a2e8..379f7eb 100644
--- a/include/ext4fs.h
+++ b/include/ext4fs.h
@@ -141,4 +141,5 @@
int ext4fs_probe(block_dev_desc_t *fs_dev_desc,
disk_partition_t *fs_partition);
int ext4_read_file(const char *filename, void *buf, int offset, int len);
+int ext4_read_superblock(char *buffer);
#endif
diff --git a/include/ext_common.h b/include/ext_common.h
index 86373a6..78a7808 100644
--- a/include/ext_common.h
+++ b/include/ext_common.h
@@ -34,7 +34,6 @@
#define __EXT_COMMON__
#include <command.h>
#define SECTOR_SIZE 0x200
-#define SECTOR_BITS 9
/* Magic value used to identify an ext2 filesystem. */
#define EXT2_MAGIC 0xEF53
@@ -58,18 +57,13 @@
#define FILETYPE_INO_SYMLINK 0120000
#define EXT2_ROOT_INO 2 /* Root inode */
-/* Bits used as offset in sector */
-#define DISK_SECTOR_BITS 9
/* The size of an ext2 block in bytes. */
#define EXT2_BLOCK_SIZE(data) (1 << LOG2_BLOCK_SIZE(data))
-/* Log2 size of ext2 block in 512 blocks. */
-#define LOG2_EXT2_BLOCK_SIZE(data) (__le32_to_cpu \
- (data->sblock.log2_block_size) + 1)
-
/* Log2 size of ext2 block in bytes. */
-#define LOG2_BLOCK_SIZE(data) (__le32_to_cpu \
- (data->sblock.log2_block_size) + 10)
+#define LOG2_BLOCK_SIZE(data) (__le32_to_cpu \
+ (data->sblock.log2_block_size) \
+ + EXT2_MIN_BLOCK_LOG_SIZE)
#define INODE_SIZE_FILESYSTEM(data) (__le32_to_cpu \
(data->sblock.inode_size))
diff --git a/include/faraday/ftsdc010.h b/include/faraday/ftsdc010.h
index c34dde7..8284f53 100644
--- a/include/faraday/ftsdc010.h
+++ b/include/faraday/ftsdc010.h
@@ -23,6 +23,7 @@
#define __FTSDC010_H
#ifndef __ASSEMBLY__
+
/* sd controller register */
struct ftsdc010_mmc {
unsigned int cmd; /* 0x00 - command reg */
@@ -143,6 +144,15 @@
#define FTSDC010_STATUS_SDIO_IRPT (1 << 16) /* SDIO card intr */
#define FTSDC010_STATUS_DATA0_STATUS (1 << 17)
#endif /* CONFIG_FTSDC010_SDIO */
+#define FTSDC010_STATUS_RSP_ERROR \
+ (FTSDC010_STATUS_RSP_CRC_FAIL | FTSDC010_STATUS_RSP_TIMEOUT)
+#define FTSDC010_STATUS_RSP_MASK \
+ (FTSDC010_STATUS_RSP_ERROR | FTSDC010_STATUS_RSP_CRC_OK)
+#define FTSDC010_STATUS_DATA_ERROR \
+ (FTSDC010_STATUS_DATA_CRC_FAIL | FTSDC010_STATUS_DATA_TIMEOUT)
+#define FTSDC010_STATUS_DATA_MASK \
+ (FTSDC010_STATUS_DATA_ERROR | FTSDC010_STATUS_DATA_CRC_OK \
+ | FTSDC010_STATUS_DATA_END)
/* 0x2c - clear register */
#define FTSDC010_CLR_RSP_CRC_FAIL (1 << 0)
@@ -192,21 +202,24 @@
#define FTSDC010_CCR_CLK_DIV(x) (((x) & 0x7f) << 0)
#define FTSDC010_CCR_CLK_SD (1 << 7) /* 0: MMC, 1: SD */
#define FTSDC010_CCR_CLK_DIS (1 << 8)
+#define FTSDC010_CCR_CLK_HISPD (1 << 9) /* high speed */
/* card type */
#define FTSDC010_CARD_TYPE_SD FTSDC010_CLOCK_REG_CARD_TYPE
#define FTSDC010_CARD_TYPE_MMC 0x0
/* 0x3c - bus width register */
-#define FTSDC010_BWR_SINGLE_BUS (1 << 0)
-#define FTSDC010_BWR_WIDE_8_BUS (1 << 1)
-#define FTSDC010_BWR_WIDE_4_BUS (1 << 2)
-#define FTSDC010_BWR_WIDE_BUS_SUPPORT(x) (((x) >> 3) & 0x3)
-#define FTSDC010_BWR_CARD_DETECT (1 << 5)
-
-#define FTSDC010_BWR_1_BUS_SUPPORT 0x0
-#define FTSDC010_BWR_4_BUS_SUPPORT 0x1
-#define FTSDC010_BWR_8_BUS_SUPPORT 0x2
+#define FTSDC010_BWR_MODE_1BIT (1 << 0) /* 1 bit mode enabled */
+#define FTSDC010_BWR_MODE_8BIT (1 << 1) /* 8 bit mode enabled */
+#define FTSDC010_BWR_MODE_4BIT (1 << 2) /* 4 bit mode enabled */
+#define FTSDC010_BWR_MODE_MASK (7 << 0)
+#define FTSDC010_BWR_MODE_SHIFT (0)
+#define FTSDC010_BWR_CAPS_1BIT (0 << 3) /* 1 bits mode supported */
+#define FTSDC010_BWR_CAPS_4BIT (1 << 3) /* 1,4 bits mode supported */
+#define FTSDC010_BWR_CAPS_8BIT (2 << 3) /* 1,4,8 bits mode supported */
+#define FTSDC010_BWR_CAPS_MASK (3 << 3)
+#define FTSDC010_BWR_CAPS_SHIFT (3)
+#define FTSDC010_BWR_CARD_DETECT (1 << 5)
/* 0x44 or 0x9c - feature register */
#define FTSDC010_FEATURE_FIFO_DEPTH(x) (((x) >> 0) & 0xff)
diff --git a/include/fdt.h b/include/fdt.h
index f9612ed..526aedb 100644
--- a/include/fdt.h
+++ b/include/fdt.h
@@ -1,5 +1,56 @@
#ifndef _FDT_H
#define _FDT_H
+/*
+ * libfdt - Flat Device Tree manipulation
+ * Copyright (C) 2006 David Gibson, IBM Corporation.
+ * Copyright 2012 Kim Phillips, Freescale Semiconductor.
+ *
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ * b) Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ * 2. Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
#ifndef __ASSEMBLY__
@@ -57,6 +108,4 @@
#define FDT_V16_SIZE FDT_V3_SIZE
#define FDT_V17_SIZE (FDT_V16_SIZE + sizeof(fdt32_t))
-/* adding a ramdisk needs 0x44 bytes in version 2008.10 */
-#define FDT_RAMDISK_OVERHEAD 0x80
#endif /* _FDT_H */
diff --git a/include/fdt_support.h b/include/fdt_support.h
index 2cccc35..8f07a67 100644
--- a/include/fdt_support.h
+++ b/include/fdt_support.h
@@ -78,11 +78,9 @@
int fdt_pci_dma_ranges(void *blob, int phb_off, struct pci_controller *hose);
#endif
-#ifdef CONFIG_OF_BOARD_SETUP
void ft_board_setup(void *blob, bd_t *bd);
void ft_cpu_setup(void *blob, bd_t *bd);
void ft_pci_setup(void *blob, bd_t *bd);
-#endif
void set_working_fdt_addr(void *addr);
int fdt_resize(void *blob);
diff --git a/include/fdtdec.h b/include/fdtdec.h
index 4e8032b..818ddde 100644
--- a/include/fdtdec.h
+++ b/include/fdtdec.h
@@ -64,6 +64,8 @@
enum fdt_compat_id {
COMPAT_UNKNOWN,
COMPAT_NVIDIA_TEGRA20_USB, /* Tegra20 USB port */
+ COMPAT_NVIDIA_TEGRA30_USB, /* Tegra30 USB port */
+ COMPAT_NVIDIA_TEGRA114_USB, /* Tegra114 USB port */
COMPAT_NVIDIA_TEGRA114_I2C, /* Tegra114 I2C w/single clock source */
COMPAT_NVIDIA_TEGRA20_I2C, /* Tegra20 i2c */
COMPAT_NVIDIA_TEGRA20_DVC, /* Tegra20 dvc (really just i2c) */
@@ -89,6 +91,8 @@
COMPAT_SAMSUNG_EXYNOS_TMU, /* Exynos TMU */
COMPAT_SAMSUNG_EXYNOS_FIMD, /* Exynos Display controller */
COMPAT_SAMSUNG_EXYNOS5_DP, /* Exynos Display port controller */
+ COMPAT_SAMSUNG_EXYNOS5_DWMMC, /* Exynos5 DWMMC controller */
+ COMPAT_SAMSUNG_EXYNOS_SERIAL, /* Exynos UART */
COMPAT_MAXIM_MAX77686_PMIC, /* MAX77686 PMIC */
COMPAT_GENERIC_SPI_FLASH, /* Generic SPI Flash chip */
COMPAT_MAXIM_98095_CODEC, /* MAX98095 Codec */
diff --git a/include/fm_eth.h b/include/fm_eth.h
index 495765b..8fcf172 100644
--- a/include/fm_eth.h
+++ b/include/fm_eth.h
@@ -88,7 +88,7 @@
#define FM_TGEC_INFO_INITIALIZER(idx, n) \
{ \
- FM_ETH_INFO_INITIALIZER(idx, CONFIG_SYS_FM1_TGEC_MDIO_ADDR) \
+ FM_ETH_INFO_INITIALIZER(idx, CONFIG_SYS_FM2_TGEC_MDIO_ADDR) \
.index = idx, \
.num = n - 1, \
.type = FM_ETH_10G_E, \
@@ -96,7 +96,7 @@
.rx_port_id = RX_PORT_10G_BASE + n - 1, \
.tx_port_id = TX_PORT_10G_BASE + n - 1, \
.compat_offset = CONFIG_SYS_FSL_FM##idx##_OFFSET + \
- offsetof(struct ccsr_fman, memac[n-1]),\
+ offsetof(struct ccsr_fman, memac[n-1+8]),\
}
#else
#define FM_DTSEC_INFO_INITIALIZER(idx, n) \
diff --git a/include/hash.h b/include/hash.h
index 2dbbd9b..c402067 100644
--- a/include/hash.h
+++ b/include/hash.h
@@ -71,4 +71,26 @@
int hash_command(const char *algo_name, int flags, cmd_tbl_t *cmdtp, int flag,
int argc, char * const argv[]);
+/**
+ * hash_block() - Hash a block according to the requested algorithm
+ *
+ * The caller probably knows the hash length for the chosen algorithm, but
+ * in order to provide a general interface, and output_size parameter is
+ * provided.
+ *
+ * @algo_name: Hash algorithm to use
+ * @data: Data to hash
+ * @len: Lengh of data to hash in bytes
+ * @output: Place to put hash value
+ * @output_size: On entry, pointer to the number of bytes available in
+ * output. On exit, pointer to the number of bytes used.
+ * If NULL, then it is assumed that the caller has
+ * allocated enough space for the hash. This is possible
+ * since the caller is selecting the algorithm.
+ * @return 0 if ok, -ve on error: -EPROTONOSUPPORT for an unknown algorithm,
+ * -ENOSPC if the output buffer is not large enough.
+ */
+int hash_block(const char *algo_name, const void *data, unsigned int len,
+ uint8_t *output, int *output_size);
+
#endif
diff --git a/include/image.h b/include/image.h
index 4ad0e6b..b8cc523 100644
--- a/include/image.h
+++ b/include/image.h
@@ -36,6 +36,9 @@
#include "compiler.h"
#include <asm/byteorder.h>
+/* Define this to avoid #ifdefs later on */
+struct lmb;
+
#ifdef USE_HOSTCC
/* new uImage format support enabled on host */
@@ -43,19 +46,79 @@
#define CONFIG_OF_LIBFDT 1
#define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */
+#define IMAGE_ENABLE_IGNORE 0
+#define IMAGE_INDENT_STRING ""
+
#else
#include <lmb.h>
#include <asm/u-boot.h>
#include <command.h>
+/* Take notice of the 'ignore' property for hashes */
+#define IMAGE_ENABLE_IGNORE 1
+#define IMAGE_INDENT_STRING " "
+
#endif /* USE_HOSTCC */
#if defined(CONFIG_FIT)
#include <libfdt.h>
#include <fdt_support.h>
-#define CONFIG_MD5 /* FIT images need MD5 support */
-#define CONFIG_SHA1 /* and SHA1 */
+# ifdef CONFIG_SPL_BUILD
+# ifdef CONFIG_SPL_CRC32_SUPPORT
+# define IMAGE_ENABLE_CRC32 1
+# endif
+# ifdef CONFIG_SPL_MD5_SUPPORT
+# define IMAGE_ENABLE_MD5 1
+# endif
+# ifdef CONFIG_SPL_SHA1_SUPPORT
+# define IMAGE_ENABLE_SHA1 1
+# endif
+# else
+# define CONFIG_CRC32 /* FIT images need CRC32 support */
+# define CONFIG_MD5 /* and MD5 */
+# define CONFIG_SHA1 /* and SHA1 */
+# define IMAGE_ENABLE_CRC32 1
+# define IMAGE_ENABLE_MD5 1
+# define IMAGE_ENABLE_SHA1 1
+# endif
+
+#ifndef IMAGE_ENABLE_CRC32
+#define IMAGE_ENABLE_CRC32 0
+#endif
+
+#ifndef IMAGE_ENABLE_MD5
+#define IMAGE_ENABLE_MD5 0
+#endif
+
+#ifndef IMAGE_ENABLE_SHA1
+#define IMAGE_ENABLE_SHA1 0
+#endif
+
+#endif /* CONFIG_FIT */
+
+#ifdef CONFIG_SYS_BOOT_RAMDISK_HIGH
+# define IMAGE_ENABLE_RAMDISK_HIGH 1
+#else
+# define IMAGE_ENABLE_RAMDISK_HIGH 0
+#endif
+
+#ifdef CONFIG_OF_LIBFDT
+# define IMAGE_ENABLE_OF_LIBFDT 1
+#else
+# define IMAGE_ENABLE_OF_LIBFDT 0
+#endif
+
+#ifdef CONFIG_SYS_BOOT_GET_CMDLINE
+# define IMAGE_BOOT_GET_CMDLINE 1
+#else
+# define IMAGE_BOOT_GET_CMDLINE 0
+#endif
+
+#ifdef CONFIG_OF_BOARD_SETUP
+# define IMAAGE_OF_BOARD_SETUP 1
+#else
+# define IMAAGE_OF_BOARD_SETUP 0
#endif
/*
@@ -244,9 +307,7 @@
ulong rd_start, rd_end;/* ramdisk start/end */
-#ifdef CONFIG_OF_LIBFDT
char *ft_addr; /* flat dev tree address */
-#endif
ulong ft_len; /* length of flat device tree */
ulong initrd_start;
@@ -333,34 +394,35 @@
int genimg_get_comp_id(const char *name);
void genimg_print_size(uint32_t size);
+#if defined(CONFIG_TIMESTAMP) || defined(CONFIG_CMD_DATE) || \
+ defined(USE_HOSTCC)
+#define IMAGE_ENABLE_TIMESTAMP 1
+#else
+#define IMAGE_ENABLE_TIMESTAMP 0
+#endif
+void genimg_print_time(time_t timestamp);
+
#ifndef USE_HOSTCC
/* Image format types, returned by _get_format() routine */
#define IMAGE_FORMAT_INVALID 0x00
#define IMAGE_FORMAT_LEGACY 0x01 /* legacy image_header based format */
#define IMAGE_FORMAT_FIT 0x02 /* new, libfdt based format */
-int genimg_get_format(void *img_addr);
+int genimg_get_format(const void *img_addr);
int genimg_has_config(bootm_headers_t *images);
ulong genimg_get_image(ulong img_addr);
int boot_get_ramdisk(int argc, char * const argv[], bootm_headers_t *images,
uint8_t arch, ulong *rd_start, ulong *rd_end);
-
-#ifdef CONFIG_OF_LIBFDT
int boot_get_fdt(int flag, int argc, char * const argv[],
bootm_headers_t *images, char **of_flat_tree, ulong *of_size);
void boot_fdt_add_mem_rsv_regions(struct lmb *lmb, void *fdt_blob);
int boot_relocate_fdt(struct lmb *lmb, char **of_flat_tree, ulong *of_size);
-#endif
-#ifdef CONFIG_SYS_BOOT_RAMDISK_HIGH
int boot_ramdisk_high(struct lmb *lmb, ulong rd_data, ulong rd_len,
ulong *initrd_start, ulong *initrd_end);
-#endif /* CONFIG_SYS_BOOT_RAMDISK_HIGH */
-#ifdef CONFIG_SYS_BOOT_GET_CMDLINE
int boot_get_cmdline(struct lmb *lmb, ulong *cmd_start, ulong *cmd_end);
-#endif /* CONFIG_SYS_BOOT_GET_CMDLINE */
#ifdef CONFIG_SYS_BOOT_GET_KBD
int boot_get_kbd(struct lmb *lmb, bd_t **kbd);
#endif /* CONFIG_SYS_BOOT_GET_KBD */
@@ -502,6 +564,31 @@
}
#endif /* USE_HOSTCC */
+/**
+ * Set up properties in the FDT
+ *
+ * This sets up properties in the FDT that is to be passed to linux.
+ *
+ * @images: Images information
+ * @blob: FDT to update
+ * @of_size: Size of the FDT
+ * @lmb: Points to logical memory block structure
+ * @return 0 if ok, <0 on failure
+ */
+int image_setup_libfdt(bootm_headers_t *images, void *blob,
+ int of_size, struct lmb *lmb);
+
+/**
+ * Set up the FDT to use for booting a kernel
+ *
+ * This performs ramdisk setup, sets up the FDT if required, and adds
+ * paramters to the FDT if libfdt is available.
+ *
+ * @param images Images information
+ * @return 0 if ok, <0 on failure
+ */
+int image_setup_linux(bootm_headers_t *images);
+
/*******************************************************************/
/* New uImage format specific code (prefixed with fit_) */
/*******************************************************************/
@@ -543,7 +630,6 @@
void fit_print_contents(const void *fit);
void fit_image_print(const void *fit, int noffset, const char *p);
-void fit_image_print_hash(const void *fit, int noffset, const char *p);
/**
* fit_get_end - get FIT image size
@@ -599,18 +685,19 @@
int fit_image_hash_get_algo(const void *fit, int noffset, char **algo);
int fit_image_hash_get_value(const void *fit, int noffset, uint8_t **value,
int *value_len);
-#ifndef USE_HOSTCC
-int fit_image_hash_get_ignore(const void *fit, int noffset, int *ignore);
-#endif
int fit_set_timestamp(void *fit, int noffset, time_t timestamp);
-int fit_set_hashes(void *fit);
-int fit_image_set_hashes(void *fit, int image_noffset);
-int fit_image_hash_set_value(void *fit, int noffset, uint8_t *value,
- int value_len);
-int fit_image_check_hashes(const void *fit, int noffset);
-int fit_all_image_check_hashes(const void *fit);
+/**
+ * fit_add_verification_data() - Calculate and add hashes to FIT
+ *
+ * @fit: Fit image to process
+ * @return 0 if ok, <0 for error
+ */
+int fit_add_verification_data(void *fit);
+
+int fit_image_verify(const void *fit, int noffset);
+int fit_all_image_verify(const void *fit);
int fit_image_check_os(const void *fit, int noffset, uint8_t os);
int fit_image_check_arch(const void *fit, int noffset, uint8_t arch);
int fit_image_check_type(const void *fit, int noffset, uint8_t type);
@@ -623,8 +710,28 @@
int fit_conf_get_ramdisk_node(const void *fit, int noffset);
int fit_conf_get_fdt_node(const void *fit, int noffset);
+/**
+ * fit_conf_get_prop_node() - Get node refered to by a configuration
+ * @fit: FIT to check
+ * @noffset: Offset of conf@xxx node to check
+ * @prop_name: Property to read from the conf node
+ *
+ * The conf@ nodes contain references to other nodes, using properties
+ * like 'kernel = "kernel@1"'. Given such a property name (e.g. "kernel"),
+ * return the offset of the node referred to (e.g. offset of node
+ * "/images/kernel@1".
+ */
+int fit_conf_get_prop_node(const void *fit, int noffset,
+ const char *prop_name);
+
void fit_conf_print(const void *fit, int noffset, const char *p);
+int fit_check_ramdisk(const void *fit, int os_noffset,
+ uint8_t arch, int verify);
+
+int calculate_hash(const void *data, int data_len, const char *algo,
+ uint8_t *value, int *value_len);
+
#ifndef USE_HOSTCC
static inline int fit_image_check_target_arch(const void *fdt, int node)
{
diff --git a/include/libfdt.h b/include/libfdt.h
index fc7f75b..c5ec2ac 100644
--- a/include/libfdt.h
+++ b/include/libfdt.h
@@ -136,6 +136,28 @@
int fdt_next_node(const void *fdt, int offset, int *depth);
+/**
+ * fdt_first_subnode() - get offset of first direct subnode
+ *
+ * @fdt: FDT blob
+ * @offset: Offset of node to check
+ * @return offset of first subnode, or -FDT_ERR_NOTFOUND if there is none
+ */
+int fdt_first_subnode(const void *fdt, int offset);
+
+/**
+ * fdt_next_subnode() - get offset of next direct subnode
+ *
+ * After first calling fdt_first_subnode(), call this function repeatedly to
+ * get direct subnodes of a parent node.
+ *
+ * @fdt: FDT blob
+ * @offset: Offset of previous subnode
+ * @return offset of next subnode, or -FDT_ERR_NOTFOUND if there are no more
+ * subnodes
+ */
+int fdt_next_subnode(const void *fdt, int offset);
+
/**********************************************************************/
/* General functions */
/**********************************************************************/
@@ -582,7 +604,7 @@
* value of the property named 'name' in the node /aliases.
*
* returns:
- * a pointer to the expansion of the alias named 'name', of it exists
+ * a pointer to the expansion of the alias named 'name', if it exists
* NULL, if the given alias or the /aliases node does not exist
*/
const char *fdt_get_alias(const void *fdt, const char *name);
@@ -816,6 +838,20 @@
int fdt_node_offset_by_compatible(const void *fdt, int startoffset,
const char *compatible);
+/**
+ * fdt_stringlist_contains - check a string list property for a string
+ * @strlist: Property containing a list of strings to check
+ * @listlen: Length of property
+ * @str: String to search for
+ *
+ * This is a utility function provided for convenience. The list contains
+ * one or more strings, each terminated by \0, as is found in a device tree
+ * "compatible" property.
+ *
+ * @return: 1 if the string is found in the list, 0 not found, or invalid list
+ */
+int fdt_stringlist_contains(const char *strlist, int listlen, const char *str);
+
/**********************************************************************/
/* Write-in-place functions */
/**********************************************************************/
diff --git a/include/libfdt_env.h b/include/libfdt_env.h
index 3e3defc..0821258 100644
--- a/include/libfdt_env.h
+++ b/include/libfdt_env.h
@@ -35,4 +35,7 @@
#define fdt64_to_cpu(x) be64_to_cpu(x)
#define cpu_to_fdt64(x) cpu_to_be64(x)
+/* adding a ramdisk needs 0x44 bytes in version 2008.10 */
+#define FDT_RAMDISK_OVERHEAD 0x80
+
#endif /* _LIBFDT_ENV_H */
diff --git a/include/lmb.h b/include/lmb.h
index 5d1f4b6..43082a3 100644
--- a/include/lmb.h
+++ b/include/lmb.h
@@ -1,7 +1,6 @@
#ifndef _LINUX_LMB_H
#define _LINUX_LMB_H
#ifdef __KERNEL__
-#ifdef CONFIG_LMB
#include <asm/types.h>
/*
@@ -57,7 +56,6 @@
void board_lmb_reserve(struct lmb *lmb);
void arch_lmb_reserve(struct lmb *lmb);
-#endif /* CONFIG_LMB */
#endif /* __KERNEL__ */
#endif /* _LINUX_LMB_H */
diff --git a/include/mmc.h b/include/mmc.h
index 8bbc6b6..f88f672 100644
--- a/include/mmc.h
+++ b/include/mmc.h
@@ -68,6 +68,7 @@
#define UNUSABLE_ERR -17 /* Unusable Card */
#define COMM_ERR -18 /* Communications Error */
#define TIMEOUT -19
+#define IN_PROGRESS -20 /* operation is in progress */
#define MMC_CMD_GO_IDLE_STATE 0
#define MMC_CMD_SEND_OP_COND 1
@@ -92,6 +93,11 @@
#define MMC_CMD_APP_CMD 55
#define MMC_CMD_SPI_READ_OCR 58
#define MMC_CMD_SPI_CRC_ON_OFF 59
+#define MMC_CMD_RES_MAN 62
+
+#define MMC_CMD62_ARG1 0xefac62ec
+#define MMC_CMD62_ARG2 0xcbaea7
+
#define SD_CMD_SEND_RELATIVE_ADDR 3
#define SD_CMD_SWITCH_FUNC 6
@@ -159,6 +165,7 @@
*/
#define EXT_CSD_PARTITIONING_SUPPORT 160 /* RO */
#define EXT_CSD_ERASE_GROUP_DEF 175 /* R/W */
+#define EXT_CSD_BOOT_BUS_WIDTH 177
#define EXT_CSD_PART_CONF 179 /* R/W */
#define EXT_CSD_BUS_WIDTH 183 /* R/W */
#define EXT_CSD_HS_TIMING 185 /* R/W */
@@ -183,6 +190,16 @@
#define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */
#define EXT_CSD_BUS_WIDTH_8 2 /* Card is in 8 bit mode */
+#define EXT_CSD_BOOT_ACK_ENABLE (1 << 6)
+#define EXT_CSD_BOOT_PARTITION_ENABLE (1 << 3)
+#define EXT_CSD_PARTITION_ACCESS_ENABLE (1 << 0)
+#define EXT_CSD_PARTITION_ACCESS_DISABLE (0 << 0)
+
+#define EXT_CSD_BOOT_ACK(x) (x << 6)
+#define EXT_CSD_BOOT_PART_NUM(x) (x << 3)
+#define EXT_CSD_PARTITION_ACCESS(x) (x << 0)
+
+
#define R1_ILLEGAL_COMMAND (1 << 22)
#define R1_APP_CMD (1 << 5)
@@ -210,6 +227,11 @@
/* Maximum block size for MMC */
#define MMC_MAX_BLOCK_LEN 512
+/* The number of MMC physical partitions. These consist of:
+ * boot partitions (2), general purpose partitions (4) in MMC v4.4.
+ */
+#define MMC_NUM_BOOT_PARTITION 2
+
struct mmc_cid {
unsigned long psn;
unsigned short oid;
@@ -270,6 +292,10 @@
int (*getcd)(struct mmc *mmc);
int (*getwp)(struct mmc *mmc);
uint b_max;
+ char op_cond_pending; /* 1 if we are waiting on an op_cond command */
+ char init_in_progress; /* 1 if we have done mmc_start_init() */
+ char preinit; /* start init as early as possible */
+ uint op_cond_response; /* the response byte from the last op_cond */
};
int mmc_register(struct mmc *mmc);
@@ -286,6 +312,36 @@
int mmc_getcd(struct mmc *mmc);
int mmc_getwp(struct mmc *mmc);
void spl_mmc_load(void) __noreturn;
+/* Function to change the size of boot partition and rpmb partitions */
+int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long bootsize,
+ unsigned long rpmbsize);
+/* Function to send commands to open/close the specified boot partition */
+int mmc_boot_part_access(struct mmc *mmc, u8 ack, u8 part_num, u8 access);
+
+/**
+ * Start device initialization and return immediately; it does not block on
+ * polling OCR (operation condition register) status. Then you should call
+ * mmc_init, which would block on polling OCR status and complete the device
+ * initializatin.
+ *
+ * @param mmc Pointer to a MMC device struct
+ * @return 0 on success, IN_PROGRESS on waiting for OCR status, <0 on error.
+ */
+int mmc_start_init(struct mmc *mmc);
+
+/**
+ * Set preinit flag of mmc device.
+ *
+ * This will cause the device to be pre-inited during mmc_initialize(),
+ * which may save boot time if the device is not accessed until later.
+ * Some eMMC devices take 200-300ms to init, but unfortunately they
+ * must be sent a series of commands to even get them to start preparing
+ * for operation.
+ *
+ * @param mmc Pointer to a MMC device struct
+ * @param preinit preinit flag value
+ */
+void mmc_set_preinit(struct mmc *mmc, int preinit);
#ifdef CONFIG_GENERIC_MMC
#define mmc_host_is_spi(mmc) ((mmc)->host_caps & MMC_MODE_SPI)
diff --git a/include/mpc8220.h b/include/mpc8220.h
deleted file mode 100644
index c4900a0..0000000
--- a/include/mpc8220.h
+++ /dev/null
@@ -1,717 +0,0 @@
-/*
- * include/mpc8220.h
- *
- * Prototypes, etc. for the Motorola MPC8220
- * embedded cpu chips
- *
- * 2004 (c) Freescale, Inc.
- * Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#ifndef __MPC8220_H__
-#define __MPC8220_H__
-
-/* Processor name */
-#if defined(CONFIG_MPC8220)
-#define CPU_ID_STR "MPC8220"
-#endif
-
-/* Exception offsets (PowerPC standard) */
-#define EXC_OFF_SYS_RESET 0x0100
-#define _START_OFFSET EXC_OFF_SYS_RESET
-
-/* Internal memory map */
-/* MPC8220 Internal Register MMAP */
-#define MMAP_MBAR (CONFIG_SYS_MBAR + 0x00000000) /* chip selects */
-#define MMAP_MEMCTL (CONFIG_SYS_MBAR + 0x00000100) /* sdram controller */
-#define MMAP_XLBARB (CONFIG_SYS_MBAR + 0x00000200) /* xlb arbitration control */
-#define MMAP_CDM (CONFIG_SYS_MBAR + 0x00000300) /* clock distribution module */
-#define MMAP_VDOPLL (CONFIG_SYS_MBAR + 0x00000400) /* video PLL */
-#define MMAP_FB (CONFIG_SYS_MBAR + 0x00000500) /* flex bus controller */
-#define MMAP_PCFG (CONFIG_SYS_MBAR + 0x00000600) /* port config */
-#define MMAP_ICTL (CONFIG_SYS_MBAR + 0x00000700) /* interrupt controller */
-#define MMAP_GPTMR (CONFIG_SYS_MBAR + 0x00000800) /* general purpose timers */
-#define MMAP_SLTMR (CONFIG_SYS_MBAR + 0x00000900) /* slice timers */
-#define MMAP_GPIO (CONFIG_SYS_MBAR + 0x00000A00) /* gpio module */
-#define MMAP_XCPCI (CONFIG_SYS_MBAR + 0x00000B00) /* pci controller */
-#define MMAP_PCIARB (CONFIG_SYS_MBAR + 0x00000C00) /* pci arbiter */
-#define MMAP_EXTDMA1 (CONFIG_SYS_MBAR + 0x00000D00) /* external dma1 */
-#define MMAP_EXTDMA2 (CONFIG_SYS_MBAR + 0x00000E00) /* external dma1 */
-#define MMAP_USBH (CONFIG_SYS_MBAR + 0x00001000) /* usb host */
-#define MMAP_CMTMR (CONFIG_SYS_MBAR + 0x00007f00) /* comm timers */
-#define MMAP_DMA (CONFIG_SYS_MBAR + 0x00008000) /* dma */
-#define MMAP_USBD (CONFIG_SYS_MBAR + 0x00008200) /* usb device */
-#define MMAP_COMMPCI (CONFIG_SYS_MBAR + 0x00008400) /* pci comm Bus regs */
-#define MMAP_1284 (CONFIG_SYS_MBAR + 0x00008500) /* 1284 */
-#define MMAP_PEV (CONFIG_SYS_MBAR + 0x00008600) /* print engine video */
-#define MMAP_PSC1 (CONFIG_SYS_MBAR + 0x00008800) /* psc1 block */
-#define MMAP_I2C (CONFIG_SYS_MBAR + 0x00008f00) /* i2c controller */
-#define MMAP_FEC1 (CONFIG_SYS_MBAR + 0x00009000) /* fast ethernet 1 */
-#define MMAP_FEC2 (CONFIG_SYS_MBAR + 0x00009800) /* fast ethernet 2 */
-#define MMAP_JBIGRAM (CONFIG_SYS_MBAR + 0x0000a000) /* jbig RAM */
-#define MMAP_JBIG (CONFIG_SYS_MBAR + 0x0000c000) /* jbig */
-#define MMAP_PDLA (CONFIG_SYS_MBAR + 0x00010000) /* */
-#define MMAP_SRAMCFG (CONFIG_SYS_MBAR + 0x0001ff00) /* SRAM config */
-#define MMAP_SRAM (CONFIG_SYS_MBAR + 0x00020000) /* SRAM */
-
-#define SRAM_SIZE 0x8000 /* 32 KB */
-
-/* ------------------------------------------------------------------------ */
-/*
- * Macro for Programmable Serial Channel
- */
-/* equates for mode reg. 1 for channel A or B */
-#define PSC_MR1_RX_RTS 0x80000000 /* receiver RTS enabled */
-#define PSC_MR1_RX_INT 0x40000000 /* receiver intrupt enabled */
-#define PSC_MR1_ERR_MODE 0x20000000 /* block error mode */
-#define PSC_MR1_PAR_MODE_MULTI 0x18000000 /* multi_drop mode */
-#define PSC_MR1_NO_PARITY 0x10000000 /* no parity mode */
-#define PSC_MR1_ALWAYS_0 0x08000000 /* force parity mode */
-#define PSC_MR1_ALWAYS_1 0x0c000000 /* force parity mode */
-#define PSC_MR1_EVEN_PARITY 0x00000000 /* parity mode */
-#define PSC_MR1_ODD_PARITY 0x04000000 /* 0 = even, 1 = odd */
-#define PSC_MR1_BITS_CHAR_8 0x03000000 /* 8 bits */
-#define PSC_MR1_BITS_CHAR_7 0x02000000 /* 7 bits */
-#define PSC_MR1_BITS_CHAR_6 0x01000000 /* 6 bits */
-#define PSC_MR1_BITS_CHAR_5 0x00000000 /* 5 bits */
-
-/* equates for mode reg. 2 for channel A or B */
-#define PSC_MR2_NORMAL_MODE 0x00000000 /* normal channel mode */
-#define PSC_MR2_AUTO_MODE 0x40000000 /* automatic channel mode */
-#define PSC_MR2_LOOPBACK_LOCL 0x80000000 /* local loopback channel mode */
-#define PSC_MR2_LOOPBACK_REMT 0xc0000000 /* remote loopback channel mode */
-#define PSC_MR2_TX_RTS 0x20000000 /* transmitter RTS enabled */
-#define PSC_MR2_TX_CTS 0x10000000 /* transmitter CTS enabled */
-#define PSC_MR2_STOP_BITS_2 0x0f000000 /* 2 stop bits */
-#define PSC_MR2_STOP_BITS_1 0x07000000 /* 1 stop bit */
-
-/* equates for status reg. A or B */
-#define PSC_SR_BREAK 0x80000000 /* received break */
-#define PSC_SR_NEOF PSC_SR_BREAK /* Next byte is EOF - MIR/FIR */
-#define PSC_SR_FRAMING 0x40000000 /* framing error */
-#define PSC_SR_PHYERR PSC_SR_FRAMING/* Physical Layer error - MIR/FIR */
-#define PSC_SR_PARITY 0x20000000 /* parity error */
-#define PSC_SR_CRCERR PSC_SR_PARITY /* CRC error */
-#define PSC_SR_OVERRUN 0x10000000 /* overrun error */
-#define PSC_SR_TXEMT 0x08000000 /* transmitter empty */
-#define PSC_SR_TXRDY 0x04000000 /* transmitter ready*/
-#define PSC_SR_FFULL 0x02000000 /* fifo full */
-#define PSC_SR_RXRDY 0x01000000 /* receiver ready */
-#define PSC_SR_DEOF 0x00800000 /* Detect EOF or RX-FIFO contain EOF */
-#define PSC_SR_ERR 0x00400000 /* Error Status including FIFO */
-
-/* equates for clock select reg. */
-#define PSC_CSRX16EXT_CLK 0x1110 /* x 16 ext_clock */
-#define PSC_CSRX1EXT_CLK 0x1111 /* x 1 ext_clock */
-
-/* equates for command reg. A or B */
-#define PSC_CR_NO_COMMAND 0x00000000 /* no command */
-#define PSC_CR_RST_MR_PTR_CMD 0x10000000 /* reset mr pointer command */
-#define PSC_CR_RST_RX_CMD 0x20000000 /* reset receiver command */
-#define PSC_CR_RST_TX_CMD 0x30000000 /* reset transmitter command */
-#define PSC_CR_RST_ERR_STS_CMD 0x40000000 /* reset error status cmnd */
-#define PSC_CR_RST_BRK_INT_CMD 0x50000000 /* reset break int. command */
-#define PSC_CR_STR_BREAK_CMD 0x60000000 /* start break command */
-#define PSC_CR_STP_BREAK_CMD 0x70000000 /* stop break command */
-#define PSC_CR_RX_ENABLE 0x01000000 /* receiver enabled */
-#define PSC_CR_RX_DISABLE 0x02000000 /* receiver disabled */
-#define PSC_CR_TX_ENABLE 0x04000000 /* transmitter enabled */
-#define PSC_CR_TX_DISABLE 0x08000000 /* transmitter disabled */
-
-/* equates for input port change reg. */
-#define PSC_IPCR_SYNC 0x80000000 /* Sync Detect */
-#define PSC_IPCR_D_CTS 0x10000000 /* Delta CTS */
-#define PSC_IPCR_CTS 0x01000000 /* CTS - current state of PSC_CTS */
-
-/* equates for auxiliary control reg. (timer and counter clock selects) */
-#define PSC_ACR_BRG 0x80000000 /* for 68681 compatibility
- baud rate gen select
- 0 = set 1; 1 = set 2
- equates are set 2 ONLY */
-#define PSC_ACR_TMR_EXT_CLK_16 0x70000000 /* xtnl clock divided by 16 */
-#define PSC_ACR_TMR_EXT_CLK 0x60000000 /* external clock */
-#define PSC_ACR_TMR_IP2_16 0x50000000 /* ip2 divided by 16 */
-#define PSC_ACR_TMR_IP2 0x40000000 /* ip2 */
-#define PSC_ACR_CTR_EXT_CLK_16 0x30000000 /* xtnl clock divided by 16 */
-#define PSC_ACR_CTR_TXCB 0x20000000 /* channel B xmitr clock */
-#define PSC_ACR_CTR_TXCA 0x10000000 /* channel A xmitr clock */
-#define PSC_ACR_CTR_IP2 0x00000000 /* ip2 */
-#define PSC_ACR_IEC0 0x01000000 /* interrupt enable ctrl for D_CTS */
-
-/* equates for int. status reg. */
-#define PSC_ISR_IPC 0x80000000 /* input port change*/
-#define PSC_ISR_BREAK 0x04000000 /* delta break */
-#define PSC_ISR_RX_RDY 0x02000000 /* receiver rdy /fifo full */
-#define PSC_ISR_TX_RDY 0x01000000 /* transmitter ready */
-#define PSC_ISR_DEOF 0x00800000 /* Detect EOF / RX-FIFO contains EOF */
-#define PSC_ISR_ERR 0x00400000 /* Error Status including FIFO */
-
-/* equates for int. mask reg. */
-#define PSC_IMR_CLEAR 0xff000000 /* Clear the imr */
-#define PSC_IMR_IPC 0x80000000 /* input port change*/
-#define PSC_IMR_BREAK 0x04000000 /* delta break */
-#define PSC_IMR_RX_RDY 0x02000000 /* rcvr ready / fifo full */
-#define PSC_IMR_TX_RDY 0x01000000 /* transmitter ready */
-#define PSC_IMR_DEOF 0x00800000 /* Detect EOF / RX-FIFO contains EOF */
-#define PSC_IMR_ERR 0x00400000 /* Error Status including FIFO */
-
-/* equates for input port reg. */
-#define PSC_IP_LPWRB 0x80000000 /* Low power mode in Ac97 */
-#define PSC_IP_TGL 0x40000000 /* test usage */
-#define PSC_IP_CTS 0x01000000 /* CTS */
-
-/* equates for output port bit set reg. */
-#define PSC_OPSET_RTS 0x01000000 /* Assert PSC_RTS output */
-
-/* equates for output port bit reset reg. */
-#define PSC_OPRESET_RTS 0x01000000 /* Assert PSC_RTS output */
-
-/* equates for rx FIFO number of data reg. */
-#define PSC_RFNUM(x) ((x&0xff)<<24)/* receive count */
-
-/* equates for tx FIFO number of data reg. */
-#define PSC_TFNUM(x) ((x&0xff)<<24)/* receive count */
-
-/* equates for rx FIFO status reg */
-#define PSC_RFSTAT_TAG(x) ((x&3)<<28) /* tag */
-#define PSC_RFSTAT_FRAME0 0x08 /* Frame Indicator 0 */
-#define PSC_RFSTAT_FRAME1 0x04 /* Frame Indicator 1 */
-#define PSC_RFSTAT_FRAME2 0x02 /* Frame Indicator 2 */
-#define PSC_RFSTAT_FRAME3 0x01 /* Frame Indicator 3 */
-#define PSC_RFSTAT_FRAME(x) ((x&0x0f)<<24)/* Frame indicator */
-#define PSC_RFSTAT_ERR 0x00400000 /* Fifo err */
-#define PSC_RFSTAT_UF 0x00200000 /* Underflow */
-#define PSC_RFSTAT_OF 0x00100000 /* overflow */
-#define PSC_RFSTAT_FR 0x00080000 /* frame ready */
-#define PSC_RFSTAT_FULL 0x00040000 /* full */
-#define PSC_RFSTAT_ALARM 0x00020000 /* alarm */
-#define PSC_RFSTAT_EMPTY 0x00010000 /* empty */
-
-/* equates for tx FIFO status reg */
-#define PSC_TFSTAT_TAG(x) ((x&3)<<28) /* tag */
-#define PSC_TFSTAT_FRAME0 0x08 /* Frame Indicator 0 */
-#define PSC_TFSTAT_FRAME1 0x04 /* Frame Indicator 1 */
-#define PSC_TFSTAT_FRAME2 0x02 /* Frame Indicator 2 */
-#define PSC_TFSTAT_FRAME3 0x01 /* Frame Indicator 3 */
-#define PSC_TFSTAT_FRAME(x) ((x&0x0f)<<24)/* Frame indicator */
-#define PSC_TFSTAT_ERR 0x00400000 /* Fifo err */
-#define PSC_TFSTAT_UF 0x00200000 /* Underflow */
-#define PSC_TFSTAT_OF 0x00100000 /* overflow */
-#define PSC_TFSTAT_FR 0x00080000 /* frame ready */
-#define PSC_TFSTAT_FULL 0x00040000 /* full */
-#define PSC_TFSTAT_ALARM 0x00020000 /* alarm */
-#define PSC_TFSTAT_EMPTY 0x00010000 /* empty */
-
-/* equates for rx FIFO control reg. */
-#define PSC_RFCNTL_WTAG(x) ((x&3)<<29) /* Write tag */
-#define PSC_RFCNTL_FRAME 0x08000000 /* Frame mode enable */
-#define PSC_RFCNTL_GR(x) ((x&7)<<24) /* Granularity */
-
-/* equates for tx FIFO control reg. */
-#define PSC_TFCNTL_WTAG(x) ((x&3)<<29) /* Write tag */
-#define PSC_TFCNTL_FRAME 0x08000000 /* Frame mode enable */
-#define PSC_TFCNTL_GR(x) ((x&7)<<24) /* Granularity */
-
-/* equates for rx FIFO alarm reg */
-#define PSC_RFALARM(x) (x&0x1ff) /* Alarm */
-
-/* equates for tx FIFO alarm reg */
-#define PSC_TFALARM(x) (x&0x1ff) /* Alarm */
-
-/* equates for rx FIFO read pointer */
-#define PSC_RFRPTR(x) (x&0x1ff) /* read pointer */
-
-/* equates for tx FIFO read pointer */
-#define PSC_TFRPTR(x) (x&0x1ff) /* read pointer */
-
-/* equates for rx FIFO write pointer */
-#define PSC_RFWPTR(x) (x&0x1ff) /* write pointer */
-
-/* equates for rx FIFO write pointer */
-#define PSC_TFWPTR(x) (x&0x1ff) /* write pointer */
-
-/* equates for rx FIFO last read frame pointer reg */
-#define PSC_RFLRFPTR(x) (x&0x1ff) /* last read frame pointer */
-
-/* equates for tx FIFO last read frame pointer reg */
-#define PSC_TFLRFPTR(x) (x&0x1ff) /* last read frame pointer */
-
-/* equates for rx FIFO last write frame pointer reg */
-#define PSC_RFLWFPTR(x) (x&0x1ff) /* last write frame pointer */
-
-/* equates for tx FIFO last write frame pointer reg */
-#define PSC_TFLWFPTR(x) (x&0x1ff) /* last write frame pointer */
-
-/* PCI configuration (only for PLL determination)*/
-#define PCI_REG_PCIGSCR (MMAP_XCPCI + 0x60) /* Global status/control register */
-#define PCI_REG_PCIGSCR_PCI2XLB_CLK_MASK 0x07000000
-#define PCI_REG_PCIGSCR_PCI2XLB_CLK_BIT 24
-
-#define PCI_REG_PCICAR (MMAP_XCPCI + 0xF8) /* Configuration Address Register */
-
-/* ------------------------------------------------------------------------ */
-/*
- * Macro for General Purpose Timer
- */
-/* Enable and Mode Select */
-#define GPT_OCT(x) (x & 0x3)<<4/* Output Compare Type */
-#define GPT_ICT(x) (x & 0x3) /* Input Capture Type */
-#define GPT_CTRL_WDEN 0x80 /* Watchdog Enable */
-#define GPT_CTRL_CE 0x10 /* Counter Enable */
-#define GPT_CTRL_STPCNT 0x04 /* Stop continous */
-#define GPT_CTRL_ODRAIN 0x02 /* Open Drain */
-#define GPT_CTRL_INTEN 0x01 /* Interrupt Enable */
-#define GPT_MODE_GPIO(x) (x & 0x3)<<4/* Gpio Mode Type */
-#define GPT_TMS_ICT 0x01 /* Input Capture Enable */
-#define GPT_TMS_OCT 0x02 /* Output Capture Enable */
-#define GPT_TMS_PWM 0x03 /* PWM Capture Enable */
-#define GPT_TMS_SGPIO 0x04 /* PWM Capture Enable */
-
-#define GPT_PWM_WIDTH(x) (x & 0xffff)
-
-/* Status */
-#define GPT_STA_CAPTURE(x) (x & 0xffff)/* Read of internal counter */
-
-#define GPT_OVFPIN_OVF(x) (x & 0x70) /* Internal counter roll over */
-#define GPT_OVFPIN_PIN 0x01 /* Input pin - Timer 0 and 1 */
-
-#define GPT_INT_TEXP 0x08 /* Timer Expired in Internal Timer mode */
-#define GPT_INT_PWMP 0x04 /* PWM end of period occurred */
-#define GPT_INT_COMP 0x02 /* OC reference event occurred */
-#define GPT_INT_CAPT 0x01 /* IC reference event occurred */
-
-/* ------------------------------------------------------------------------ */
-/*
- * Port configuration
- */
-#define CONFIG_SYS_FEC1_PORT0_CONFIG 0x00000000
-#define CONFIG_SYS_FEC1_PORT1_CONFIG 0x00000000
-#define CONFIG_SYS_1284_PORT0_CONFIG 0x00000000
-#define CONFIG_SYS_1284_PORT1_CONFIG 0x00000000
-#define CONFIG_SYS_FEC2_PORT2_CONFIG 0x00000000
-#define CONFIG_SYS_PEV_PORT2_CONFIG 0x00000000
-#define CONFIG_SYS_GP0_PORT0_CONFIG 0x00000000
-#define CONFIG_SYS_GP1_PORT2_CONFIG 0xaaaaaac0
-#define CONFIG_SYS_PSC_PORT3_CONFIG 0x00020000
-#define CONFIG_SYS_CS1_PORT3_CONFIG 0x00000000
-#define CONFIG_SYS_CS2_PORT3_CONFIG 0x10000000
-#define CONFIG_SYS_CS3_PORT3_CONFIG 0x40000000
-#define CONFIG_SYS_CS4_PORT3_CONFIG 0x00000400
-#define CONFIG_SYS_CS5_PORT3_CONFIG 0x00000200
-#define CONFIG_SYS_PCI_PORT3_CONFIG 0x01400180
-#define CONFIG_SYS_I2C_PORT3_CONFIG 0x00000000
-#define CONFIG_SYS_GP2_PORT3_CONFIG 0x000200a0
-
-/* ------------------------------------------------------------------------ */
-/*
- * DRAM configuration
- */
-
-/* Field definitions for the control register */
-#define CTL_MODE_ENABLE_SHIFT 31
-#define CTL_CKE_SHIFT 30
-#define CTL_DDR_SHIFT 29
-#define CTL_REFRESH_SHIFT 28
-#define CTL_ADDRMUX_SHIFT 24
-#define CTL_PRECHARGE_SHIFT 23
-#define CTL_DRIVE_RULE_SHIFT 22
-#define CTL_REFRESH_INTERVAL_SHIFT 16
-#define CTL_DQSOEN_SHIFT 8
-#define CTL_BUFFERED_SHIFT 4
-#define CTL_REFRESH_CMD_SHIFT 2
-#define CTL_PRECHARGE_CMD_SHIFT 1
-
-#define CTL_MODE_ENABLE (1<<CTL_MODE_ENABLE_SHIFT)
-#define CTL_CKE_HIGH (1<<CTL_CKE_SHIFT)
-#define CTL_DDR_MODE (1<<CTL_DDR_SHIFT)
-#define CTL_REFRESH_ENABLE (1<<CTL_REFRESH_SHIFT)
-#define CTL_ADDRMUX(value) ((value)<<CTL_ADDRMUX_SHIFT)
-#define CTL_A8PRECHARGE (1<<CTL_PRECHARGE_SHIFT)
-#define CTL_REFRESH_INTERVAL(value) ((value)<<CTL_REFRESH_INTERVAL_SHIFT)
-#define CTL_DQSOEN(value) ((value)<<CTL_DQSOEN_SHIFT)
-#define CTL_BUFFERED (1<<CTL_BUFFERED_SHIFT)
-#define CTL_REFRESH_CMD (1<<CTL_REFRESH_CMD_SHIFT)
-#define CTL_PRECHARGE_CMD (1<<CTL_PRECHARGE_CMD_SHIFT)
-
-/* Field definitions for config register 1 */
-
-#define CFG1_SRD2RWP_SHIFT 28
-#define CFG1_SWT2RWP_SHIFT 24
-#define CFG1_RLATENCY_SHIFT 20
-#define CFG1_ACT2WR_SHIFT 16
-#define CFG1_PRE2ACT_SHIFT 12
-#define CFG1_REF2ACT_SHIFT 8
-#define CFG1_WLATENCY_SHIFT 4
-
-#define CFG1_SRD2RWP(value) ((value)<<CFG1_SRD2RWP_SHIFT)
-#define CFG1_SWT2RWP(value) ((value)<<CFG1_SWT2RWP_SHIFT)
-#define CFG1_RLATENCY(value) ((value)<<CFG1_RLATENCY_SHIFT)
-#define CFG1_ACT2WR(value) ((value)<<CFG1_ACT2WR_SHIFT)
-#define CFG1_PRE2ACT(value) ((value)<<CFG1_PRE2ACT_SHIFT)
-#define CFG1_REF2ACT(value) ((value)<<CFG1_REF2ACT_SHIFT)
-#define CFG1_WLATENCY(value) ((value)<<CFG1_WLATENCY_SHIFT)
-
-/* Field definitions for config register 2 */
-#define CFG2_BRD2RP_SHIFT 28
-#define CFG2_BWT2RWP_SHIFT 24
-#define CFG2_BRD2WT_SHIFT 20
-#define CFG2_BURSTLEN_SHIFT 16
-
-#define CFG2_BRD2RP(value) ((value)<<CFG2_BRD2RP_SHIFT)
-#define CFG2_BWT2RWP(value) ((value)<<CFG2_BWT2RWP_SHIFT)
-#define CFG2_BRD2WT(value) ((value)<<CFG2_BRD2WT_SHIFT)
-#define CFG2_BURSTLEN(value) ((value)<<CFG2_BURSTLEN_SHIFT)
-
-/* Field definitions for the mode/extended mode register - mode
- * register access
- */
-#define MODE_REG_SHIFT 30
-#define MODE_OPMODE_SHIFT 25
-#define MODE_CL_SHIFT 22
-#define MODE_BT_SHIFT 21
-#define MODE_BURSTLEN_SHIFT 18
-#define MODE_CMD_SHIFT 16
-
-#define MODE_MODE 0
-#define MODE_OPMODE(value) ((value)<<MODE_OPMODE_SHIFT)
-#define MODE_CL(value) ((value)<<MODE_CL_SHIFT)
-#define MODE_BT_INTERLEAVED (1<<MODE_BT_SHIFT)
-#define MODE_BT_SEQUENTIAL (0<<MODE_BT_SHIFT)
-#define MODE_BURSTLEN(value) ((value)<<MODE_BURSTLEN_SHIFT)
-#define MODE_CMD (1<<MODE_CMD_SHIFT)
-
-#define MODE_BURSTLEN_8 3
-#define MODE_BURSTLEN_4 2
-#define MODE_BURSTLEN_2 1
-
-#define MODE_CL_2 2
-#define MODE_CL_2p5 6
-#define MODE_OPMODE_NORMAL 0
-#define MODE_OPMODE_RESETDLL 2
-
-
-/* Field definitions for the mode/extended mode register - extended
- * mode register access
- */
-#define MODE_X_DLL_SHIFT 18 /* DLL enable/disable */
-#define MODE_X_DS_SHIFT 19 /* Drive strength normal/reduced */
-#define MODE_X_QFC_SHIFT 20 /* QFC function (whatever that is) */
-#define MODE_X_OPMODE_SHIFT 21
-
-#define MODE_EXTENDED (1<<MODE_REG_SHIFT)
-#define MODE_X_DLL_ENABLE 0
-#define MODE_X_DLL_DISABLE (1<<MODE_X_DLL_SHIFT)
-#define MODE_X_DS_NORMAL 0
-#define MODE_X_DS_REDUCED (1<<MODE_X_DS_SHIFT)
-#define MODE_X_QFC_DISABLED 0
-#define MODE_X_OPMODE(value) ((value)<<MODE_X_OPMODE_SHIFT)
-
-#ifndef __ASSEMBLY__
-/*
- * DMA control/status registers.
- */
-struct mpc8220_dma {
- u32 taskBar; /* DMA + 0x00 */
- u32 currentPointer; /* DMA + 0x04 */
- u32 endPointer; /* DMA + 0x08 */
- u32 variablePointer;/* DMA + 0x0c */
-
- u8 IntVect1; /* DMA + 0x10 */
- u8 IntVect2; /* DMA + 0x11 */
- u16 PtdCntrl; /* DMA + 0x12 */
-
- u32 IntPend; /* DMA + 0x14 */
- u32 IntMask; /* DMA + 0x18 */
-
- u16 tcr_0; /* DMA + 0x1c */
- u16 tcr_1; /* DMA + 0x1e */
- u16 tcr_2; /* DMA + 0x20 */
- u16 tcr_3; /* DMA + 0x22 */
- u16 tcr_4; /* DMA + 0x24 */
- u16 tcr_5; /* DMA + 0x26 */
- u16 tcr_6; /* DMA + 0x28 */
- u16 tcr_7; /* DMA + 0x2a */
- u16 tcr_8; /* DMA + 0x2c */
- u16 tcr_9; /* DMA + 0x2e */
- u16 tcr_a; /* DMA + 0x30 */
- u16 tcr_b; /* DMA + 0x32 */
- u16 tcr_c; /* DMA + 0x34 */
- u16 tcr_d; /* DMA + 0x36 */
- u16 tcr_e; /* DMA + 0x38 */
- u16 tcr_f; /* DMA + 0x3a */
-
- u8 IPR0; /* DMA + 0x3c */
- u8 IPR1; /* DMA + 0x3d */
- u8 IPR2; /* DMA + 0x3e */
- u8 IPR3; /* DMA + 0x3f */
- u8 IPR4; /* DMA + 0x40 */
- u8 IPR5; /* DMA + 0x41 */
- u8 IPR6; /* DMA + 0x42 */
- u8 IPR7; /* DMA + 0x43 */
- u8 IPR8; /* DMA + 0x44 */
- u8 IPR9; /* DMA + 0x45 */
- u8 IPR10; /* DMA + 0x46 */
- u8 IPR11; /* DMA + 0x47 */
- u8 IPR12; /* DMA + 0x48 */
- u8 IPR13; /* DMA + 0x49 */
- u8 IPR14; /* DMA + 0x4a */
- u8 IPR15; /* DMA + 0x4b */
- u8 IPR16; /* DMA + 0x4c */
- u8 IPR17; /* DMA + 0x4d */
- u8 IPR18; /* DMA + 0x4e */
- u8 IPR19; /* DMA + 0x4f */
- u8 IPR20; /* DMA + 0x50 */
- u8 IPR21; /* DMA + 0x51 */
- u8 IPR22; /* DMA + 0x52 */
- u8 IPR23; /* DMA + 0x53 */
- u8 IPR24; /* DMA + 0x54 */
- u8 IPR25; /* DMA + 0x55 */
- u8 IPR26; /* DMA + 0x56 */
- u8 IPR27; /* DMA + 0x57 */
- u8 IPR28; /* DMA + 0x58 */
- u8 IPR29; /* DMA + 0x59 */
- u8 IPR30; /* DMA + 0x5a */
- u8 IPR31; /* DMA + 0x5b */
-
- u32 res1; /* DMA + 0x5c */
- u32 res2; /* DMA + 0x60 */
- u32 res3; /* DMA + 0x64 */
- u32 MDEDebug; /* DMA + 0x68 */
- u32 ADSDebug; /* DMA + 0x6c */
- u32 Value1; /* DMA + 0x70 */
- u32 Value2; /* DMA + 0x74 */
- u32 Control; /* DMA + 0x78 */
- u32 Status; /* DMA + 0x7c */
- u32 EU00; /* DMA + 0x80 */
- u32 EU01; /* DMA + 0x84 */
- u32 EU02; /* DMA + 0x88 */
- u32 EU03; /* DMA + 0x8c */
- u32 EU04; /* DMA + 0x90 */
- u32 EU05; /* DMA + 0x94 */
- u32 EU06; /* DMA + 0x98 */
- u32 EU07; /* DMA + 0x9c */
- u32 EU10; /* DMA + 0xa0 */
- u32 EU11; /* DMA + 0xa4 */
- u32 EU12; /* DMA + 0xa8 */
- u32 EU13; /* DMA + 0xac */
- u32 EU14; /* DMA + 0xb0 */
- u32 EU15; /* DMA + 0xb4 */
- u32 EU16; /* DMA + 0xb8 */
- u32 EU17; /* DMA + 0xbc */
- u32 EU20; /* DMA + 0xc0 */
- u32 EU21; /* DMA + 0xc4 */
- u32 EU22; /* DMA + 0xc8 */
- u32 EU23; /* DMA + 0xcc */
- u32 EU24; /* DMA + 0xd0 */
- u32 EU25; /* DMA + 0xd4 */
- u32 EU26; /* DMA + 0xd8 */
- u32 EU27; /* DMA + 0xdc */
- u32 EU30; /* DMA + 0xe0 */
- u32 EU31; /* DMA + 0xe4 */
- u32 EU32; /* DMA + 0xe8 */
- u32 EU33; /* DMA + 0xec */
- u32 EU34; /* DMA + 0xf0 */
- u32 EU35; /* DMA + 0xf4 */
- u32 EU36; /* DMA + 0xf8 */
- u32 EU37; /* DMA + 0xfc */
-};
-
-/*
- * PCI Header Registers
- */
-typedef struct mpc8220_xcpci {
- u32 dev_ven_id; /* 0xb00 - device/vendor ID */
- u32 stat_cmd_reg; /* 0xb04 - status command register */
- u32 class_code_rev_id; /* 0xb08 - class code / revision ID */
- u32 bist_htyp_lat_cshl; /* 0xb0c - BIST/HeaderType/Latency/cache line */
- u32 base0; /* 0xb10 - base address 0 */
- u32 base1; /* 0xb14 - base address 1 */
- u32 reserved1[4]; /* 0xb18->0xd27 - base address 2 - 5 */
- u32 cis; /* 0xb28 - cardBus CIS pointer */
- u32 sub_sys_ven_id; /* 0xb2c - sub system ID/ subsystem vendor ID */
- u32 reserved2; /* 0xb30 - expansion ROM base address */
- u32 reserved3; /* 0xb00 - reserved */
- u32 reserved4; /* 0xb00 - reserved */
- u32 mlat_mgnt_ipl; /* 0xb3c - MaxLat/MinGnt/ int pin/int line */
- u32 reserved5[8];
- /* MPC8220 specific - not accessible in PCI header space externally */
- u32 glb_stat_ctl; /* 0xb60 - Global Status Control */
- u32 target_bar0; /* 0xb64 - Target Base Address 0 */
- u32 target_bar1; /* 0xb68 - Target Base Address 1 */
- u32 target_ctrl; /* 0xb6c - Target Control */
- u32 init_win0; /* 0xb70 - Initiator Window 0 Base/Translation */
- u32 init_win1; /* 0xb74 - Initiator Window 1 Base/Translation */
- u32 init_win2; /* 0xb78 - Initiator Window 2 Base/Translation */
- u32 reserved6; /* 0xb7c - reserved */
- u32 init_win_cfg; /* 0xb80 */
- u32 init_ctrl; /* 0xb84 */
- u32 init_stat; /* 0xb88 */
- u32 reserved7[27];
- u32 cfg_adr; /* 0xbf8 */
- u32 reserved8;
-} mpc8220_xcpci_t;
-
-/* PCI->XLB space translation (MPC8220 target), reg0 can address max 256MB,
- reg1 - 1GB */
-#define PCI_BASE_ADDR_REG0 0x40000000
-#define PCI_BASE_ADDR_REG1 (CONFIG_SYS_SDRAM_BASE)
-#define PCI_TARGET_BASE_ADDR_REG0 (CONFIG_SYS_MBAR)
-#define PCI_TARGET_BASE_ADDR_REG1 (CONFIG_SYS_SDRAM_BASE)
-#define PCI_TARGET_BASE_ADDR_EN 1<<0
-
-
-/* PCI Global Status/Control Register (PCIGSCR) */
-#define PCI_GLB_STAT_CTRL_PE_SHIFT 29
-#define PCI_GLB_STAT_CTRL_SE_SHIFT 28
-#define PCI_GLB_STAT_CTRL_XLB_TO_PCI_CLK_SHIFT 24
-#define PCI_GLB_STAT_CTRL_XLB_TO_PCI_CLK_MASK 0x7
-#define PCI_GLB_STAT_CTRL_IPG_TO_PCI_CLK_SHIFT 16
-#define PCI_GLB_STAT_CTRL_IPG_TO_PCI_CLK_MASK 0x7
-#define PCI_GLB_STAT_CTRL_PEE_SHIFT 13
-#define PCI_GLB_STAT_CTRL_SEE_SHIFT 12
-#define PCI_GLB_STAT_CTRL_PR_SHIFT 0
-
-#define PCI_GLB_STAT_CTRL_PE (1<<PCI_GLB_STAT_CTRL_PE_SHIFT)
-#define PCI_GLB_STAT_CTRL_SE (1<<PCI_GLB_STAT_CTRL_SE_SHIFT)
-#define PCI_GLB_STAT_CTRL_PEE (1<<PCI_GLB_STAT_CTRL_PEE_SHIFT)
-#define PCI_GLB_STAT_CTRL_SEE (1<<PCI_GLB_STAT_CTRL_SEE_SHIFT)
-#define PCI_GLB_STAT_CTRL_PR (1<<PCI_GLB_STAT_CTRL_PR_SHIFT)
-
-/* PCI Target Control Register (PCITCR) */
-#define PCI_TARGET_CTRL_LD_SHIFT 24
-#define PCI_TARGET_CTRL_P_SHIFT 16
-
-#define PCI_TARGET_CTRL_LD (1<<PCI_TARGET_CTRL_LD_SHIFT)
-#define PCI_TARGET_CTRL_P (1<<PCI_TARGET_CTRL_P_SHIFT)
-
-/* PCI Initiator Window Configuration Register (PCIIWCR) */
-#define PCI_INIT_WIN_CFG_WIN0_CTRL_IO_SHIFT 27
-#define PCI_INIT_WIN_CFG_WIN0_CTRL_PRC_SHIFT 25
-#define PCI_INIT_WIN_CFG_WIN0_CTRL_PRC_MASK 0x3
-#define PCI_INIT_WIN_CFG_WIN0_CTRL_EN_SHIFT 24
-#define PCI_INIT_WIN_CFG_WIN1_CTRL_IO_SHIFT 19
-#define PCI_INIT_WIN_CFG_WIN1_CTRL_PRC_SHIFT 17
-#define PCI_INIT_WIN_CFG_WIN1_CTRL_PRC_MASK 0x3
-#define PCI_INIT_WIN_CFG_WIN1_CTRL_EN_SHIFT 16
-#define PCI_INIT_WIN_CFG_WIN2_CTRL_IO_SHIFT 11
-#define PCI_INIT_WIN_CFG_WIN2_CTRL_PRC_SHIFT 9
-#define PCI_INIT_WIN_CFG_WIN2_CTRL_PRC_MASK 0x3
-#define PCI_INIT_WIN_CFG_WIN2_CTRL_EN_SHIFT 8
-
-#define PCI_INIT_WIN_CFG_WIN_MEM_READ 0x0
-#define PCI_INIT_WIN_CFG_WIN_MEM_READ_LINE 0x1
-#define PCI_INIT_WIN_CFG_WIN_MEM_READ_MULTIPLE 0x2
-
-#define PCI_INIT_WIN_CFG_WIN0_CTRL_IO (1<<PCI_INIT_WIN_CFG_WIN0_CTRL_IO_SHIFT)
-#define PCI_INIT_WIN_CFG_WIN0_CTRL_EN (1<<PCI_INIT_WIN_CFG_WIN0_CTRL_EN_SHIFT)
-#define PCI_INIT_WIN_CFG_WIN1_CTRL_IO (1<<PCI_INIT_WIN_CFG_WIN1_CTRL_IO_SHIFT)
-#define PCI_INIT_WIN_CFG_WIN1_CTRL_EN (1<<PCI_INIT_WIN_CFG_WIN1_CTRL_EN_SHIFT)
-#define PCI_INIT_WIN_CFG_WIN2_CTRL_IO (1<<PCI_INIT_WIN_CFG_WIN2_CTRL_IO_SHIFT)
-#define PCI_INIT_WIN_CFG_WIN2_CTRL_EN (1<<PCI_INIT_WIN_CFG_WIN2_CTRL_EN_SHIFT)
-
-/* PCI Initiator Control Register (PCIICR) */
-#define PCI_INIT_CTRL_REE_SHIFT 26
-#define PCI_INIT_CTRL_IAE_SHIFT 25
-#define PCI_INIT_CTRL_TAE_SHIFT 24
-#define PCI_INIT_CTRL_MAX_RETRIES_SHIFT 0
-#define PCI_INIT_CTRL_MAX_RETRIES_MASK 0xff
-
-#define PCI_INIT_CTRL_REE (1<<PCI_INIT_CTRL_REE_SHIFT)
-#define PCI_INIT_CTRL_IAE (1<<PCI_INIT_CTRL_IAE_SHIFT)
-#define PCI_INIT_CTRL_TAE (1<<PCI_INIT_CTRL_TAE_SHIFT)
-
-/* PCI Status/Command Register (PCISCR) - PCI Dword 1 */
-#define PCI_STAT_CMD_PE_SHIFT 31
-#define PCI_STAT_CMD_SE_SHIFT 30
-#define PCI_STAT_CMD_MA_SHIFT 29
-#define PCI_STAT_CMD_TR_SHIFT 28
-#define PCI_STAT_CMD_TS_SHIFT 27
-#define PCI_STAT_CMD_DT_SHIFT 25
-#define PCI_STAT_CMD_DT_MASK 0x3
-#define PCI_STAT_CMD_DP_SHIFT 24
-#define PCI_STAT_CMD_FC_SHIFT 23
-#define PCI_STAT_CMD_R_SHIFT 22
-#define PCI_STAT_CMD_66M_SHIFT 21
-#define PCI_STAT_CMD_C_SHIFT 20
-#define PCI_STAT_CMD_F_SHIFT 9
-#define PCI_STAT_CMD_S_SHIFT 8
-#define PCI_STAT_CMD_ST_SHIFT 7
-#define PCI_STAT_CMD_PER_SHIFT 6
-#define PCI_STAT_CMD_V_SHIFT 5
-#define PCI_STAT_CMD_MW_SHIFT 4
-#define PCI_STAT_CMD_SP_SHIFT 3
-#define PCI_STAT_CMD_B_SHIFT 2
-#define PCI_STAT_CMD_M_SHIFT 1
-#define PCI_STAT_CMD_IO_SHIFT 0
-
-#define PCI_STAT_CMD_PE (1<<PCI_STAT_CMD_PE_SHIFT)
-#define PCI_STAT_CMD_SE (1<<PCI_STAT_CMD_SE_SHIFT)
-#define PCI_STAT_CMD_MA (1<<PCI_STAT_CMD_MA_SHIFT)
-#define PCI_STAT_CMD_TR (1<<PCI_STAT_CMD_TR_SHIFT)
-#define PCI_STAT_CMD_TS (1<<PCI_STAT_CMD_TS_SHIFT)
-#define PCI_STAT_CMD_DP (1<<PCI_STAT_CMD_DP_SHIFT)
-#define PCI_STAT_CMD_FC (1<<PCI_STAT_CMD_FC_SHIFT)
-#define PCI_STAT_CMD_R (1<<PCI_STAT_CMD_R_SHIFT)
-#define PCI_STAT_CMD_66M (1<<PCI_STAT_CMD_66M_SHIFT)
-#define PCI_STAT_CMD_C (1<<PCI_STAT_CMD_C_SHIFT)
-#define PCI_STAT_CMD_F (1<<PCI_STAT_CMD_F_SHIFT)
-#define PCI_STAT_CMD_S (1<<PCI_STAT_CMD_S_SHIFT)
-#define PCI_STAT_CMD_ST (1<<PCI_STAT_CMD_ST_SHIFT)
-#define PCI_STAT_CMD_PER (1<<PCI_STAT_CMD_PER_SHIFT)
-#define PCI_STAT_CMD_V (1<<PCI_STAT_CMD_V_SHIFT)
-#define PCI_STAT_CMD_MW (1<<PCI_STAT_CMD_MW_SHIFT)
-#define PCI_STAT_CMD_SP (1<<PCI_STAT_CMD_SP_SHIFT)
-#define PCI_STAT_CMD_B (1<<PCI_STAT_CMD_B_SHIFT)
-#define PCI_STAT_CMD_M (1<<PCI_STAT_CMD_M_SHIFT)
-#define PCI_STAT_CMD_IO (1<<PCI_STAT_CMD_IO_SHIFT)
-
-/* PCI Configuration 1 Register (PCICR1) - PCI Dword 3 */
-#define PCI_CFG1_HT_SHIFT 16
-#define PCI_CFG1_HT_MASK 0xff
-#define PCI_CFG1_LT_SHIFT 8
-#define PCI_CFG1_LT_MASK 0xff
-#define PCI_CFG1_CLS_SHIFT 0
-#define PCI_CFG1_CLS_MASK 0xf
-
-/* function prototypes */
-void loadtask(int basetask, int tasks);
-u32 dramSetup(void);
-
-#if defined(CONFIG_PSC_CONSOLE)
-int psc_serial_init (void);
-void psc_serial_putc(const char c);
-void psc_serial_puts (const char *s);
-int psc_serial_getc(void);
-int psc_serial_tstc(void);
-void psc_serial_setbrg(void);
-#endif
-
-#if defined (CONFIG_EXTUART_CONSOLE)
-int ext_serial_init (void);
-void ext_serial_putc(const char c);
-void ext_serial_puts (const char *s);
-int ext_serial_getc(void);
-int ext_serial_tstc(void);
-void ext_serial_setbrg(void);
-#endif
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __MPC8220_H__ */
diff --git a/include/mtd/cfi_flash.h b/include/mtd/cfi_flash.h
index 966b5e0..b644b91 100644
--- a/include/mtd/cfi_flash.h
+++ b/include/mtd/cfi_flash.h
@@ -129,12 +129,16 @@
} cfiword_t;
/* CFI standard query structure */
+/* The offsets and sizes of this packed structure members correspond
+ * to the actual layout in CFI Flash chips. Some 16- and 32-bit members
+ * are unaligned and must be accessed with explicit unaligned access macros.
+ */
struct cfi_qry {
u8 qry[3];
- u16 p_id;
- u16 p_adr;
- u16 a_id;
- u16 a_adr;
+ u16 p_id; /* unaligned */
+ u16 p_adr; /* unaligned */
+ u16 a_id; /* unaligned */
+ u16 a_adr; /* unaligned */
u8 vcc_min;
u8 vcc_max;
u8 vpp_min;
@@ -148,10 +152,10 @@
u8 block_erase_timeout_max;
u8 chip_erase_timeout_max;
u8 dev_size;
- u16 interface_desc;
- u16 max_buf_write_size;
+ u16 interface_desc; /* aligned */
+ u16 max_buf_write_size; /* aligned */
u8 num_erase_regions;
- u32 erase_region_info[NUM_ERASE_REGIONS];
+ u32 erase_region_info[NUM_ERASE_REGIONS]; /* unaligned */
} __attribute__((packed));
struct cfi_pri_hdr {
diff --git a/include/netdev.h b/include/netdev.h
index 516b351..df454b5 100644
--- a/include/netdev.h
+++ b/include/netdev.h
@@ -77,7 +77,6 @@
int mcffec_initialize(bd_t *bis);
int mpc512x_fec_initialize(bd_t *bis);
int mpc5xxx_fec_initialize(bd_t *bis);
-int mpc8220_fec_initialize(bd_t *bis);
int mpc82xx_scc_enet_initialize(bd_t *bis);
int mvgbe_initialize(bd_t *bis);
int natsemi_initialize(bd_t *bis);
diff --git a/include/palmas.h b/include/palmas.h
index 3b18589..aff48b5 100644
--- a/include/palmas.h
+++ b/include/palmas.h
@@ -26,17 +26,90 @@
#include <common.h>
#include <i2c.h>
-/* I2C chip addresses */
-#define PALMAS_CHIP_ADDR 0x48
+/* I2C chip addresses, TW6035/37 */
+#define TWL603X_CHIP_P1 0x48 /* Page 1 */
+#define TWL603X_CHIP_P2 0x49 /* Page 2 */
+#define TWL603X_CHIP_P3 0x4a /* Page 3 */
-/* 0x1XY translates to page 1, register address 0xXY */
+/* TPS659038/39 */
+#define TPS65903X_CHIP_P1 0x58 /* Page 1 */
+
+/* Page 1 registers (0x1XY translates to page 1, reg addr 0xXY): */
+
+/* LDO1 control/voltage */
+#define LDO1_CTRL 0x50
+#define LDO1_VOLTAGE 0x51
+
+/* LDO9 control/voltage */
#define LDO9_CTRL 0x60
#define LDO9_VOLTAGE 0x61
-/* Bit field definitions for LDOx_CTRL */
-#define LDO_ON (1 << 4)
-#define LDO_MODE_SLEEP (1 << 2)
-#define LDO_MODE_ACTIVE (1 << 0)
+/* LDOUSB control/voltage */
+#define LDOUSB_CTRL 0x64
+#define LDOUSB_VOLTAGE 0x65
+
+/* Control of 32 kHz audio clock */
+#define CLK32KGAUDIO_CTRL 0xd5
+
+/* SYSEN2_CTRL for VCC_3v3_AUX supply on the sEVM */
+#define SYSEN2_CTRL 0xd9
+
+/*
+ * Bit field definitions for LDOx_CTRL, SYSENx_CTRL
+ * and some other xxx_CTRL resources:
+ */
+#define LDO9_BYP_EN (1 << 6) /* LDO9 only! */
+#define RSC_STAT_ON (1 << 4) /* RO status bit! */
+#define RSC_MODE_SLEEP (1 << 2)
+#define RSC_MODE_ACTIVE (1 << 0)
+
+/* Some LDO voltage values */
+#define LDO_VOLT_OFF 0
+#define LDO_VOLT_1V8 0x13
+#define LDO_VOLT_3V0 0x2b
+#define LDO_VOLT_3V3 0x31
+/* Request bypass, LDO9 only */
+#define LDO9_BYPASS 0x3f
+
+/* SMPS7_CTRL */
+#define SMPS7_CTRL 0x30
+
+/* SMPS9_CTRL */
+#define SMPS9_CTRL 0x38
+#define SMPS9_VOLTAGE 0x3b
+
+/* Bit field definitions for SMPSx_CTRL */
+#define SMPS_MODE_ACT_AUTO 1
+#define SMPS_MODE_ACT_ECO 2
+#define SMPS_MODE_ACT_FPWM 3
+#define SMPS_MODE_SLP_AUTO (1 << 2)
+#define SMPS_MODE_SLP_ECO (2 << 2)
+#define SMPS_MODE_SLP_FPWM (3 << 2)
+
+/*
+ * Some popular SMPS voltages, all with RANGE=1; note
+ * that RANGE cannot be changed on the fly
+ */
+#define SMPS_VOLT_OFF 0
+#define SMPS_VOLT_1V2 0x90
+#define SMPS_VOLT_1V8 0xae
+#define SMPS_VOLT_2V1 0xbd
+#define SMPS_VOLT_3V0 0xea
+#define SMPS_VOLT_3V3 0xf9
+
+/* Backup Battery & VRTC Control */
+#define BB_VRTC_CTRL 0xa8
+/* Bit definitions for BB_VRTC_CTRL */
+#define VRTC_EN_SLP (1 << 6)
+#define VRTC_EN_OFF (1 << 5)
+#define VRTC_PWEN (1 << 4)
+#define BB_LOW_ICHRG (1 << 3)
+#define BB_HIGH_ICHRG (0 << 3)
+#define BB_VSEL_3V0 (0 << 1)
+#define BB_VSEL_2V5 (1 << 1)
+#define BB_VSEL_3V15 (2 << 1)
+#define BB_VSEL_VBAT (3 << 1)
+#define BB_CHRG_EN (1 << 0)
/*
* Functions to read and write from TPS659038/TWL6035/TWL6037
@@ -54,5 +127,8 @@
void palmas_init_settings(void);
int palmas_mmc1_poweron_ldo(void);
+int twl603x_mmc1_set_ldo9(u8 vsel);
+int twl603x_audio_power(u8 on);
+int twl603x_enable_bb_charge(u8 bb_fields);
#endif /* PALMAS_H */
diff --git a/include/phy.h b/include/phy.h
index 7b4ce74..75bf3b4 100644
--- a/include/phy.h
+++ b/include/phy.h
@@ -52,6 +52,7 @@
PHY_INTERFACE_MODE_MII,
PHY_INTERFACE_MODE_GMII,
PHY_INTERFACE_MODE_SGMII,
+ PHY_INTERFACE_MODE_QSGMII,
PHY_INTERFACE_MODE_TBI,
PHY_INTERFACE_MODE_RMII,
PHY_INTERFACE_MODE_RGMII,
@@ -67,6 +68,7 @@
[PHY_INTERFACE_MODE_MII] = "mii",
[PHY_INTERFACE_MODE_GMII] = "gmii",
[PHY_INTERFACE_MODE_SGMII] = "sgmii",
+ [PHY_INTERFACE_MODE_QSGMII] = "qsgmii",
[PHY_INTERFACE_MODE_TBI] = "tbi",
[PHY_INTERFACE_MODE_RMII] = "rmii",
[PHY_INTERFACE_MODE_RGMII] = "rgmii",
diff --git a/include/power/max77686_pmic.h b/include/power/max77686_pmic.h
index fdc7ca9..1c374a9 100644
--- a/include/power/max77686_pmic.h
+++ b/include/power/max77686_pmic.h
@@ -157,6 +157,8 @@
/* Buck1 1 volt value */
#define MAX77686_BUCK1OUT_1V 0x5
+/* Buck1 1.05 volt value */
+#define MAX77686_BUCK1OUT_1_05V 0x6
#define MAX77686_BUCK1CTRL_EN (3 << 0)
/* Buck2 1.3 volt value */
#define MAX77686_BUCK2DVS1_1_3V 0x38
diff --git a/include/ppc_asm.tmpl b/include/ppc_asm.tmpl
index 2db4784..c0f8cc8 100644
--- a/include/ppc_asm.tmpl
+++ b/include/ppc_asm.tmpl
@@ -175,7 +175,7 @@
#define IM_IMMR (IM_REGBASE+0x01a8)
#define IM_SCCR (IM_REGBASE+0x0c80)
-#elif defined(CONFIG_MPC5xxx) || defined(CONFIG_MPC8220)
+#elif defined(CONFIG_MPC5xxx)
#define HID0_ICE_BITPOS 16
#define HID0_DCE_BITPOS 17
diff --git a/include/usb.h b/include/usb.h
index d79c865..d7b082d 100644
--- a/include/usb.h
+++ b/include/usb.h
@@ -76,6 +76,12 @@
unsigned char act_altsetting;
struct usb_endpoint_descriptor ep_desc[USB_MAXENDPOINTS];
+ /*
+ * Super Speed Device will have Super Speed Endpoint
+ * Companion Descriptor (section 9.6.7 of usb 3.0 spec)
+ * Revision 1.0 June 6th 2011
+ */
+ struct usb_ss_ep_comp_descriptor ss_ep_comp_desc[USB_MAXENDPOINTS];
} __attribute__ ((packed));
/* Configuration information.. */
diff --git a/include/usb_defs.h b/include/usb_defs.h
index 9502544..4f3601a 100644
--- a/include/usb_defs.h
+++ b/include/usb_defs.h
@@ -150,6 +150,18 @@
#define USB_REQ_SET_IDLE 0x0A
#define USB_REQ_SET_PROTOCOL 0x0B
+/* Device features */
+#define USB_FEAT_HALT 0x00
+#define USB_FEAT_WAKEUP 0x01
+#define USB_FEAT_TEST 0x02
+
+/* Test modes */
+#define USB_TEST_MODE_J 0x01
+#define USB_TEST_MODE_K 0x02
+#define USB_TEST_MODE_SE0_NAK 0x03
+#define USB_TEST_MODE_PACKET 0x04
+#define USB_TEST_MODE_FORCE_ENABLE 0x05
+
/* "pipe" definitions */
@@ -208,6 +220,18 @@
#define USB_PORT_FEAT_C_SUSPEND 18
#define USB_PORT_FEAT_C_OVER_CURRENT 19
#define USB_PORT_FEAT_C_RESET 20
+#define USB_PORT_FEAT_TEST 21
+
+/*
+ * Changes to Port feature numbers for Super speed,
+ * from USB 3.0 spec Table 10-8
+ */
+#define USB_SS_PORT_FEAT_U1_TIMEOUT 23
+#define USB_SS_PORT_FEAT_U2_TIMEOUT 24
+#define USB_SS_PORT_FEAT_C_LINK_STATE 25
+#define USB_SS_PORT_FEAT_C_CONFIG_ERROR 26
+#define USB_SS_PORT_FEAT_BH_RESET 28
+#define USB_SS_PORT_FEAT_C_BH_RESET 29
/* wPortStatus bits */
#define USB_PORT_STAT_CONNECTION 0x0001
@@ -218,9 +242,19 @@
#define USB_PORT_STAT_POWER 0x0100
#define USB_PORT_STAT_LOW_SPEED 0x0200
#define USB_PORT_STAT_HIGH_SPEED 0x0400 /* support for EHCI */
-#define USB_PORT_STAT_SPEED \
+#define USB_PORT_STAT_SUPER_SPEED 0x0600 /* faking support to XHCI */
+#define USB_PORT_STAT_SPEED_MASK \
(USB_PORT_STAT_LOW_SPEED | USB_PORT_STAT_HIGH_SPEED)
+/*
+ * Changes to wPortStatus bit field in USB 3.0
+ * See USB 3.0 spec Table 10-11
+ */
+#define USB_SS_PORT_STAT_LINK_STATE 0x01e0
+#define USB_SS_PORT_STAT_POWER 0x0200
+#define USB_SS_PORT_STAT_SPEED 0x1c00
+#define USB_SS_PORT_STAT_SPEED_5GBPS 0x0000
+
/* wPortChange bits */
#define USB_PORT_STAT_C_CONNECTION 0x0001
#define USB_PORT_STAT_C_ENABLE 0x0002
@@ -228,13 +262,21 @@
#define USB_PORT_STAT_C_OVERCURRENT 0x0008
#define USB_PORT_STAT_C_RESET 0x0010
+/*
+ * Changes to wPortChange bit fields in USB 3.0
+ * See USB 3.0 spec Table 10-12
+ */
+#define USB_SS_PORT_STAT_C_BH_RESET 0x0020
+#define USB_SS_PORT_STAT_C_LINK_STATE 0x0040
+#define USB_SS_PORT_STAT_C_CONFIG_ERROR 0x0080
+
/* wHubCharacteristics (masks) */
#define HUB_CHAR_LPSM 0x0003
#define HUB_CHAR_COMPOUND 0x0004
#define HUB_CHAR_OCPM 0x0018
/*
- *Hub Status & Hub Change bit masks
+ * Hub Status & Hub Change bit masks
*/
#define HUB_STATUS_LOCAL_POWER 0x0001
#define HUB_STATUS_OVERCURRENT 0x0002
diff --git a/include/watchdog.h b/include/watchdog.h
index 97ec186..d95e4b1 100644
--- a/include/watchdog.h
+++ b/include/watchdog.h
@@ -108,8 +108,7 @@
void reset_4xx_watchdog(void);
#endif
-/* Freescale i.MX */
-#if defined(CONFIG_IMX_WATCHDOG) && !defined(__ASSEMBLY__)
+#if defined(CONFIG_HW_WATCHDOG) && !defined(__ASSEMBLY__)
void hw_watchdog_init(void);
#endif
#endif /* _WATCHDOG_H_ */
diff --git a/lib/fdtdec.c b/lib/fdtdec.c
index ac1fe0b..24ccd0a 100644
--- a/lib/fdtdec.c
+++ b/lib/fdtdec.c
@@ -37,6 +37,8 @@
static const char * const compat_names[COMPAT_COUNT] = {
COMPAT(UNKNOWN, "<none>"),
COMPAT(NVIDIA_TEGRA20_USB, "nvidia,tegra20-ehci"),
+ COMPAT(NVIDIA_TEGRA30_USB, "nvidia,tegra30-ehci"),
+ COMPAT(NVIDIA_TEGRA114_USB, "nvidia,tegra114-ehci"),
COMPAT(NVIDIA_TEGRA114_I2C, "nvidia,tegra114-i2c"),
COMPAT(NVIDIA_TEGRA20_I2C, "nvidia,tegra20-i2c"),
COMPAT(NVIDIA_TEGRA20_DVC, "nvidia,tegra20-i2c-dvc"),
@@ -62,6 +64,8 @@
COMPAT(SAMSUNG_EXYNOS_TMU, "samsung,exynos-tmu"),
COMPAT(SAMSUNG_EXYNOS_FIMD, "samsung,exynos-fimd"),
COMPAT(SAMSUNG_EXYNOS5_DP, "samsung,exynos5-dp"),
+ COMPAT(SAMSUNG_EXYNOS5_DWMMC, "samsung,exynos5250-dwmmc"),
+ COMPAT(SAMSUNG_EXYNOS_SERIAL, "samsung,exynos4210-uart"),
COMPAT(MAXIM_MAX77686_PMIC, "maxim,max77686_pmic"),
COMPAT(GENERIC_SPI_FLASH, "spi-flash"),
COMPAT(MAXIM_98095_CODEC, "maxim,max98095-codec"),
diff --git a/lib/hashtable.c b/lib/hashtable.c
index 6050dd0..4cdbc95 100644
--- a/lib/hashtable.c
+++ b/lib/hashtable.c
@@ -901,6 +901,12 @@
*sp++ = '\0'; /* terminate value */
++dp;
+ if (*name == 0) {
+ debug("INSERT: unable to use an empty key\n");
+ __set_errno(EINVAL);
+ return 0;
+ }
+
/* Skip variables which are not supposed to be processed */
if (!drop_var_from_set(name, nvars, localvars))
continue;
diff --git a/lib/libfdt/fdt.c b/lib/libfdt/fdt.c
index 387e354..154e9a4 100644
--- a/lib/libfdt/fdt.c
+++ b/lib/libfdt/fdt.c
@@ -202,6 +202,34 @@
return offset;
}
+int fdt_first_subnode(const void *fdt, int offset)
+{
+ int depth = 0;
+
+ offset = fdt_next_node(fdt, offset, &depth);
+ if (offset < 0 || depth != 1)
+ return -FDT_ERR_NOTFOUND;
+
+ return offset;
+}
+
+int fdt_next_subnode(const void *fdt, int offset)
+{
+ int depth = 1;
+
+ /*
+ * With respect to the parent, the depth of the next subnode will be
+ * the same as the last.
+ */
+ do {
+ offset = fdt_next_node(fdt, offset, &depth);
+ if (offset < 0 || depth < 1)
+ return -FDT_ERR_NOTFOUND;
+ } while (depth > 1);
+
+ return offset;
+}
+
const char *_fdt_find_string(const char *strtab, int tabsize, const char *s)
{
int len = strlen(s) + 1;
diff --git a/lib/libfdt/fdt_ro.c b/lib/libfdt/fdt_ro.c
index 1a461c3..b65f4e2 100644
--- a/lib/libfdt/fdt_ro.c
+++ b/lib/libfdt/fdt_ro.c
@@ -519,8 +519,7 @@
return offset; /* error from fdt_next_node() */
}
-static int _fdt_stringlist_contains(const char *strlist, int listlen,
- const char *str)
+int fdt_stringlist_contains(const char *strlist, int listlen, const char *str)
{
int len = strlen(str);
const char *p;
@@ -546,7 +545,7 @@
prop = fdt_getprop(fdt, nodeoffset, "compatible", &len);
if (!prop)
return len;
- if (_fdt_stringlist_contains(prop, len, compatible))
+ if (fdt_stringlist_contains(prop, len, compatible))
return 0;
else
return 1;
diff --git a/spl/Makefile b/spl/Makefile
index d8fe948..01873de 100644
--- a/spl/Makefile
+++ b/spl/Makefile
@@ -98,6 +98,14 @@
LIBS-y += $(CPUDIR)/tegra-common/libtegra-common.o
endif
+ifneq ($(CONFIG_MX23)$(CONFIG_MX35),)
+LIBS-y += arch/$(ARCH)/imx-common/libimx-common.o
+endif
+
+ifeq ($(SOC),exynos)
+LIBS-y += $(CPUDIR)/s5p-common/libs5p-common.o
+endif
+
# Add GCC lib
ifeq ("$(USE_PRIVATE_LIBGCC)", "yes")
PLATFORM_LIBGCC = $(SPLTREE)/arch/$(ARCH)/lib/libgcc.o
diff --git a/tools/Makefile b/tools/Makefile
index 93f4a84..4630f03 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -78,6 +78,7 @@
# Source files which exist outside the tools directory
EXT_OBJ_FILES-$(CONFIG_BUILD_ENVCRC) += common/env_embedded.o
EXT_OBJ_FILES-y += common/image.o
+EXT_OBJ_FILES-$(CONFIG_FIT) += common/image-fit.o
EXT_OBJ_FILES-y += lib/crc32.o
EXT_OBJ_FILES-y += lib/md5.o
EXT_OBJ_FILES-y += lib/sha1.o
@@ -95,6 +96,7 @@
NOPED_OBJ_FILES-y += kwbimage.o
NOPED_OBJ_FILES-y += pblimage.o
NOPED_OBJ_FILES-y += imximage.o
+NOPED_OBJ_FILES-y += image-host.o
NOPED_OBJ_FILES-y += omapimage.o
NOPED_OBJ_FILES-y += mkenvimage.o
NOPED_OBJ_FILES-y += mkimage.o
@@ -202,7 +204,9 @@
$(obj)crc32.o \
$(obj)default_image.o \
$(obj)fit_image.o \
+ $(obj)image-fit.o \
$(obj)image.o \
+ $(obj)image-host.o \
$(obj)imximage.o \
$(obj)kwbimage.o \
$(obj)pblimage.o \
diff --git a/tools/aisimage.c b/tools/aisimage.c
index c645708..659df8c 100644
--- a/tools/aisimage.c
+++ b/tools/aisimage.c
@@ -32,7 +32,6 @@
#define WORD_ALIGN0 4
#define WORD_ALIGN(len) (((len)+WORD_ALIGN0-1) & ~(WORD_ALIGN0-1))
#define MAX_CMD_BUFFER 4096
-#define ARRAY_SIZE(a) (sizeof(a) / sizeof((a)[0]))
static uint32_t ais_img_size;
diff --git a/tools/buildman/control.py b/tools/buildman/control.py
index 8d7b9b5..4319ce7 100644
--- a/tools/buildman/control.py
+++ b/tools/buildman/control.py
@@ -111,6 +111,10 @@
print col.Color(col.RED, str)
sys.exit(1)
count = gitutil.CountCommitsInBranch(options.git_dir, options.branch)
+ if count is None:
+ str = "Branch '%s' not found or has no upstream" % options.branch
+ print col.Color(col.RED, str)
+ sys.exit(1)
count += 1 # Build upstream commit also
if not count:
@@ -137,6 +141,11 @@
upstream_commit = gitutil.GetUpstream(options.git_dir, options.branch)
series = patchstream.GetMetaDataForList(upstream_commit, options.git_dir,
1)
+ # Conflicting tags are not a problem for buildman, since it does not use
+ # them. For example, Series-version is not useful for buildman. On the
+ # other hand conflicting tags will cause an error. So allow later tags
+ # to overwrite earlier ones.
+ series.allow_overwrite = True
series = patchstream.GetMetaDataForList(range_expr, options.git_dir, None,
series)
diff --git a/tools/fit_image.c b/tools/fit_image.c
index 76bbba1..cc123dd 100644
--- a/tools/fit_image.c
+++ b/tools/fit_image.c
@@ -47,6 +47,48 @@
return EXIT_FAILURE;
}
+int mmap_fdt(struct mkimage_params *params, const char *fname, void **blobp,
+ struct stat *sbuf)
+{
+ void *ptr;
+ int fd;
+
+ /* Load FIT blob into memory (we need to write hashes/signatures) */
+ fd = open(fname, O_RDWR | O_BINARY);
+
+ if (fd < 0) {
+ fprintf(stderr, "%s: Can't open %s: %s\n",
+ params->cmdname, fname, strerror(errno));
+ unlink(fname);
+ return -1;
+ }
+
+ if (fstat(fd, sbuf) < 0) {
+ fprintf(stderr, "%s: Can't stat %s: %s\n",
+ params->cmdname, fname, strerror(errno));
+ unlink(fname);
+ return -1;
+ }
+
+ ptr = mmap(0, sbuf->st_size, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);
+ if (ptr == MAP_FAILED) {
+ fprintf(stderr, "%s: Can't read %s: %s\n",
+ params->cmdname, fname, strerror(errno));
+ unlink(fname);
+ return -1;
+ }
+
+ /* check if ptr has a valid blob */
+ if (fdt_check_header(ptr)) {
+ fprintf(stderr, "%s: Invalid FIT blob\n", params->cmdname);
+ unlink(fname);
+ return -1;
+ }
+
+ *blobp = ptr;
+ return fd;
+}
+
/**
* fit_handle_file - main FIT file processing function
*
@@ -65,7 +107,7 @@
char cmd[MKIMAGE_MAX_DTC_CMDLINE_LEN];
int tfd;
struct stat sbuf;
- unsigned char *ptr;
+ void *ptr;
/* Flattened Image Tree (FIT) format handling */
debug ("FIT format handling\n");
@@ -87,57 +129,25 @@
if (system (cmd) == -1) {
fprintf (stderr, "%s: system(%s) failed: %s\n",
params->cmdname, cmd, strerror(errno));
- unlink (tmpfile);
- return (EXIT_FAILURE);
+ goto err_system;
}
- /* load FIT blob into memory */
- tfd = open (tmpfile, O_RDWR|O_BINARY);
-
- if (tfd < 0) {
- fprintf (stderr, "%s: Can't open %s: %s\n",
- params->cmdname, tmpfile, strerror(errno));
- unlink (tmpfile);
- return (EXIT_FAILURE);
- }
-
- if (fstat (tfd, &sbuf) < 0) {
- fprintf (stderr, "%s: Can't stat %s: %s\n",
- params->cmdname, tmpfile, strerror(errno));
- unlink (tmpfile);
- return (EXIT_FAILURE);
- }
-
- ptr = mmap (0, sbuf.st_size, PROT_READ|PROT_WRITE, MAP_SHARED,
- tfd, 0);
- if (ptr == MAP_FAILED) {
- fprintf (stderr, "%s: Can't read %s: %s\n",
- params->cmdname, tmpfile, strerror(errno));
- unlink (tmpfile);
- return (EXIT_FAILURE);
- }
-
- /* check if ptr has a valid blob */
- if (fdt_check_header (ptr)) {
- fprintf (stderr, "%s: Invalid FIT blob\n", params->cmdname);
- unlink (tmpfile);
- return (EXIT_FAILURE);
- }
+ tfd = mmap_fdt(params, tmpfile, &ptr, &sbuf);
+ if (tfd < 0)
+ goto err_mmap;
/* set hashes for images in the blob */
- if (fit_set_hashes (ptr)) {
+ if (fit_add_verification_data(ptr)) {
fprintf (stderr, "%s Can't add hashes to FIT blob",
params->cmdname);
- unlink (tmpfile);
- return (EXIT_FAILURE);
+ goto err_add_hashes;
}
/* add a timestamp at offset 0 i.e., root */
if (fit_set_timestamp (ptr, 0, sbuf.st_mtime)) {
fprintf (stderr, "%s: Can't add image timestamp\n",
params->cmdname);
- unlink (tmpfile);
- return (EXIT_FAILURE);
+ goto err_add_timestamp;
}
debug ("Added timestamp successfully\n");
@@ -153,6 +163,14 @@
return (EXIT_FAILURE);
}
return (EXIT_SUCCESS);
+
+err_add_timestamp:
+err_add_hashes:
+ munmap(ptr, sbuf.st_size);
+err_mmap:
+err_system:
+ unlink(tmpfile);
+ return -1;
}
static int fit_check_params (struct mkimage_params *params)
diff --git a/tools/image-host.c b/tools/image-host.c
new file mode 100644
index 0000000..d944d0f
--- /dev/null
+++ b/tools/image-host.c
@@ -0,0 +1,208 @@
+/*
+ * Copyright (c) 2013, Google Inc.
+ *
+ * (C) Copyright 2008 Semihalf
+ *
+ * (C) Copyright 2000-2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include "mkimage.h"
+#include <bootstage.h>
+#include <image.h>
+#include <sha1.h>
+#include <time.h>
+#include <u-boot/crc.h>
+#include <u-boot/md5.h>
+
+/**
+ * fit_set_hash_value - set hash value in requested has node
+ * @fit: pointer to the FIT format image header
+ * @noffset: hash node offset
+ * @value: hash value to be set
+ * @value_len: hash value length
+ *
+ * fit_set_hash_value() attempts to set hash value in a node at offset
+ * given and returns operation status to the caller.
+ *
+ * returns
+ * 0, on success
+ * -1, on failure
+ */
+static int fit_set_hash_value(void *fit, int noffset, uint8_t *value,
+ int value_len)
+{
+ int ret;
+
+ ret = fdt_setprop(fit, noffset, FIT_VALUE_PROP, value, value_len);
+ if (ret) {
+ printf("Can't set hash '%s' property for '%s' node(%s)\n",
+ FIT_VALUE_PROP, fit_get_name(fit, noffset, NULL),
+ fdt_strerror(ret));
+ return -1;
+ }
+
+ return 0;
+}
+
+/**
+ * fit_image_process_hash - Process a single subnode of the images/ node
+ *
+ * Check each subnode and process accordingly. For hash nodes we generate
+ * a hash of the supplised data and store it in the node.
+ *
+ * @fit: pointer to the FIT format image header
+ * @image_name: name of image being processes (used to display errors)
+ * @noffset: subnode offset
+ * @data: data to process
+ * @size: size of data in bytes
+ * @return 0 if ok, -1 on error
+ */
+static int fit_image_process_hash(void *fit, const char *image_name,
+ int noffset, const void *data, size_t size)
+{
+ uint8_t value[FIT_MAX_HASH_LEN];
+ const char *node_name;
+ int value_len;
+ char *algo;
+
+ node_name = fit_get_name(fit, noffset, NULL);
+
+ if (fit_image_hash_get_algo(fit, noffset, &algo)) {
+ printf("Can't get hash algo property for '%s' hash node in '%s' image node\n",
+ node_name, image_name);
+ return -1;
+ }
+
+ if (calculate_hash(data, size, algo, value, &value_len)) {
+ printf("Unsupported hash algorithm (%s) for '%s' hash node in '%s' image node\n",
+ algo, node_name, image_name);
+ return -1;
+ }
+
+ if (fit_set_hash_value(fit, noffset, value, value_len)) {
+ printf("Can't set hash value for '%s' hash node in '%s' image node\n",
+ node_name, image_name);
+ return -1;
+ }
+
+ return 0;
+}
+
+/**
+ * fit_image_add_verification_data() - calculate/set hash data for image node
+ *
+ * This adds hash values for a component image node.
+ *
+ * All existing hash subnodes are checked, if algorithm property is set to
+ * one of the supported hash algorithms, hash value is computed and
+ * corresponding hash node property is set, for example:
+ *
+ * Input component image node structure:
+ *
+ * o image@1 (at image_noffset)
+ * | - data = [binary data]
+ * o hash@1
+ * |- algo = "sha1"
+ *
+ * Output component image node structure:
+ *
+ * o image@1 (at image_noffset)
+ * | - data = [binary data]
+ * o hash@1
+ * |- algo = "sha1"
+ * |- value = sha1(data)
+ *
+ * For signature details, please see doc/uImage.FIT/signature.txt
+ *
+ * @fit: Pointer to the FIT format image header
+ * @image_noffset: Requested component image node
+ * @return: 0 on success, <0 on failure
+ */
+int fit_image_add_verification_data(void *fit, int image_noffset)
+{
+ const char *image_name;
+ const void *data;
+ size_t size;
+ int noffset;
+
+ /* Get image data and data length */
+ if (fit_image_get_data(fit, image_noffset, &data, &size)) {
+ printf("Can't get image data/size\n");
+ return -1;
+ }
+
+ image_name = fit_get_name(fit, image_noffset, NULL);
+
+ /* Process all hash subnodes of the component image node */
+ for (noffset = fdt_first_subnode(fit, image_noffset);
+ noffset >= 0;
+ noffset = fdt_next_subnode(fit, noffset)) {
+ const char *node_name;
+ int ret = 0;
+
+ /*
+ * Check subnode name, must be equal to "hash" or "signature".
+ * Multiple hash nodes require unique unit node
+ * names, e.g. hash@1, hash@2, signature@1, etc.
+ */
+ node_name = fit_get_name(fit, noffset, NULL);
+ if (!strncmp(node_name, FIT_HASH_NODENAME,
+ strlen(FIT_HASH_NODENAME))) {
+ ret = fit_image_process_hash(fit, image_name, noffset,
+ data, size);
+ }
+ if (ret)
+ return -1;
+ }
+
+ return 0;
+}
+
+int fit_add_verification_data(void *fit)
+{
+ int images_noffset;
+ int noffset;
+ int ret;
+
+ /* Find images parent node offset */
+ images_noffset = fdt_path_offset(fit, FIT_IMAGES_PATH);
+ if (images_noffset < 0) {
+ printf("Can't find images parent node '%s' (%s)\n",
+ FIT_IMAGES_PATH, fdt_strerror(images_noffset));
+ return images_noffset;
+ }
+
+ /* Process its subnodes, print out component images details */
+ for (noffset = fdt_first_subnode(fit, images_noffset);
+ noffset >= 0;
+ noffset = fdt_next_subnode(fit, noffset)) {
+ /*
+ * Direct child node of the images parent node,
+ * i.e. component image node.
+ */
+ ret = fit_image_add_verification_data(fit, noffset);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
diff --git a/tools/mkimage.h b/tools/mkimage.h
index ea45f5c..e07a615 100644
--- a/tools/mkimage.h
+++ b/tools/mkimage.h
@@ -42,6 +42,8 @@
#define debug(fmt,args...)
#endif /* MKIMAGE_DEBUG */
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+
#define MKIMAGE_TMPFILE_SUFFIX ".tmp"
#define MKIMAGE_MAX_TMPFILE_LEN 256
#define MKIMAGE_DEFAULT_DTC_OPTIONS "-I dts -O dtb -p 500"
diff --git a/tools/palmtreo680/flash_u-boot.c b/tools/palmtreo680/flash_u-boot.c
new file mode 100644
index 0000000..3d8296f
--- /dev/null
+++ b/tools/palmtreo680/flash_u-boot.c
@@ -0,0 +1,177 @@
+/*
+ * Copyright (C) 2013 Mike Dunn <mikedunn@newsguy.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ *
+ *
+ * This is a userspace Linux utility that, when run on the Treo 680, will
+ * program u-boot to flash. The docg4 driver *must* be loaded with the
+ * reliable_mode and ignore_badblocks parameters enabled:
+ *
+ * modprobe docg4 ignore_badblocks=1 reliable_mode=1
+ *
+ * This utility writes the concatenated spl + u-boot image to the start of the
+ * mtd device in the format expected by the IPL/SPL. The image file and mtd
+ * device node are passed to the utility as arguments. The blocks must have
+ * been erased beforehand.
+ *
+ * When you compile this, note that it links to libmtd from mtd-utils, so ensure
+ * that your include and lib paths include this.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <string.h>
+#include <sys/types.h>
+#include <unistd.h>
+#include <errno.h>
+#include <mtd/mtd-user.h>
+#include "libmtd.h"
+
+#define RELIABLE_BLOCKSIZE 0x10000 /* block capacity in reliable mode */
+#define STANDARD_BLOCKSIZE 0x40000 /* block capacity in normal mode */
+#define PAGESIZE 512
+#define PAGES_PER_BLOCK 512
+#define OOBSIZE 7 /* available to user (16 total) */
+
+uint8_t ff_oob[OOBSIZE] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
+
+/* this is the magic number the IPL looks for (ASCII "BIPO") */
+uint8_t page0_oob[OOBSIZE] = {'B', 'I', 'P', 'O', 0xff, 0xff, 0xff};
+
+int main(int argc, char * const argv[])
+{
+ int devfd, datafd, num_blocks, block;
+ off_t file_size;
+ libmtd_t mtd_desc;
+ struct mtd_dev_info devinfo;
+ uint8_t *blockbuf;
+ char response[8];
+
+ if (argc != 3) {
+ printf("usage: %s <image file> <mtd dev node>\n", argv[0]);
+ return -EINVAL;
+ }
+
+ mtd_desc = libmtd_open();
+ if (mtd_desc == NULL) {
+ int errsv = errno;
+ fprintf(stderr, "can't initialize libmtd\n");
+ return -errsv;
+ }
+
+ /* open the spl image file and mtd device */
+ datafd = open(argv[1], O_RDONLY);
+ if (datafd == -1) {
+ int errsv = errno;
+ perror(argv[1]);
+ return -errsv;
+ }
+ devfd = open(argv[2], O_WRONLY);
+ if (devfd == -1) {
+ int errsv = errno;
+ perror(argv[2]);
+ return -errsv;
+ }
+ if (mtd_get_dev_info(mtd_desc, argv[2], &devinfo) < 0) {
+ int errsv = errno;
+ perror(argv[2]);
+ return -errsv;
+ }
+
+ /* determine the number of blocks needed by the image */
+ file_size = lseek(datafd, 0, SEEK_END);
+ if (file_size == (off_t)-1) {
+ int errsv = errno;
+ perror("lseek");
+ return -errsv;
+ }
+ num_blocks = (file_size + RELIABLE_BLOCKSIZE - 1) / RELIABLE_BLOCKSIZE;
+ file_size = lseek(datafd, 0, SEEK_SET);
+ if (file_size == (off_t)-1) {
+ int errsv = errno;
+ perror("lseek");
+ return -errsv;
+ }
+ printf("The mtd partition contains %d blocks\n", devinfo.eb_cnt);
+ printf("U-boot will occupy %d blocks\n", num_blocks);
+ if (num_blocks > devinfo.eb_cnt) {
+ fprintf(stderr, "Insufficient blocks on partition\n");
+ return -EINVAL;
+ }
+
+ printf("IMPORTANT: These blocks must be in an erased state!\n");
+ printf("Do you want to proceed?\n");
+ scanf("%s", response);
+ if ((response[0] != 'y') && (response[0] != 'Y')) {
+ printf("Exiting\n");
+ close(devfd);
+ close(datafd);
+ return 0;
+ }
+
+ blockbuf = calloc(RELIABLE_BLOCKSIZE, 1);
+ if (blockbuf == NULL) {
+ int errsv = errno;
+ perror("calloc");
+ return -errsv;
+ }
+
+ for (block = 0; block < num_blocks; block++) {
+ int ofs, page;
+ uint8_t *pagebuf = blockbuf, *buf = blockbuf;
+ uint8_t *oobbuf = page0_oob; /* magic num in oob of 1st page */
+ size_t len = RELIABLE_BLOCKSIZE;
+ int ret;
+
+ /* read data for one block from file */
+ while (len) {
+ ssize_t read_ret = read(datafd, buf, len);
+ if (read_ret == -1) {
+ int errsv = errno;
+ if (errno == EINTR)
+ continue;
+ perror("read");
+ return -errsv;
+ } else if (read_ret == 0) {
+ break; /* EOF */
+ }
+ len -= read_ret;
+ buf += read_ret;
+ }
+
+ printf("Block %d: writing\r", block + 1);
+ fflush(stdout);
+
+ for (page = 0, ofs = 0;
+ page < PAGES_PER_BLOCK;
+ page++, ofs += PAGESIZE) {
+ if (page & 0x04) /* Odd-numbered 2k page */
+ continue; /* skipped in reliable mode */
+
+ ret = mtd_write(mtd_desc, &devinfo, devfd, block, ofs,
+ pagebuf, PAGESIZE, oobbuf, OOBSIZE,
+ MTD_OPS_PLACE_OOB);
+ if (ret) {
+ fprintf(stderr,
+ "\nmtd_write returned %d on block %d, ofs %x\n",
+ ret, block + 1, ofs);
+ return -EIO;
+ }
+ oobbuf = ff_oob; /* oob for subsequent pages */
+
+ if (page & 0x01) /* odd-numbered subpage */
+ pagebuf += PAGESIZE;
+ }
+ }
+
+ printf("\nDone\n");
+
+ close(devfd);
+ close(datafd);
+ free(blockbuf);
+ return 0;
+}
diff --git a/tools/patman/gitutil.py b/tools/patman/gitutil.py
index e31da15..b7f6739 100644
--- a/tools/patman/gitutil.py
+++ b/tools/patman/gitutil.py
@@ -56,10 +56,14 @@
Returns:
Name of upstream branch (e.g. 'upstream/master') or None if none
"""
- remote = command.OutputOneLine('git', '--git-dir', git_dir, 'config',
- 'branch.%s.remote' % branch)
- merge = command.OutputOneLine('git', '--git-dir', git_dir, 'config',
- 'branch.%s.merge' % branch)
+ try:
+ remote = command.OutputOneLine('git', '--git-dir', git_dir, 'config',
+ 'branch.%s.remote' % branch)
+ merge = command.OutputOneLine('git', '--git-dir', git_dir, 'config',
+ 'branch.%s.merge' % branch)
+ except:
+ return None
+
if remote == '.':
return merge
elif remote and merge:
@@ -78,9 +82,11 @@
branch: Name of branch
Return:
Expression in the form 'upstream..branch' which can be used to
- access the commits.
+ access the commits. If the branch does not exist, returns None.
"""
upstream = GetUpstream(git_dir, branch)
+ if not upstream:
+ return None
return '%s%s..%s' % (upstream, '~' if include_upstream else '', branch)
def CountCommitsInBranch(git_dir, branch, include_upstream=False):
@@ -90,9 +96,12 @@
git_dir: Directory containing git repo
branch: Name of branch
Return:
- Number of patches that exist on top of the branch
+ Number of patches that exist on top of the branch, or None if the
+ branch does not exist.
"""
range_expr = GetRangeInBranch(git_dir, branch, include_upstream)
+ if not range_expr:
+ return None
pipe = [['git', '--git-dir', git_dir, 'log', '--oneline', '--no-decorate',
range_expr],
['wc', '-l']]
diff --git a/tools/patman/patman.py b/tools/patman/patman.py
index a8061a9..7a317c5 100755
--- a/tools/patman/patman.py
+++ b/tools/patman/patman.py
@@ -1,4 +1,4 @@
-#!/usr/bin/python
+#!/usr/bin/env python
#
# Copyright (c) 2011 The Chromium OS Authors.
#
diff --git a/tools/patman/series.py b/tools/patman/series.py
index 783b3dd..85ed316 100644
--- a/tools/patman/series.py
+++ b/tools/patman/series.py
@@ -40,6 +40,7 @@
notes: List of lines in the notes
changes: (dict) List of changes for each version, The key is
the integer version number
+ allow_overwrite: Allow tags to overwrite an existing tag
"""
def __init__(self):
self.cc = []
@@ -49,6 +50,7 @@
self.cover = None
self.notes = []
self.changes = {}
+ self.allow_overwrite = False
# Written in MakeCcFile()
# key: name of patch file
@@ -72,7 +74,7 @@
"""
# If we already have it, then add to our list
name = name.replace('-', '_')
- if name in self:
+ if name in self and not self.allow_overwrite:
values = value.split(',')
values = [str.strip() for str in values]
if type(self[name]) != type([]):