arm: integrator: Migrate platform-specific options and cleanup armcoremodule.h
This converts the following to Kconfig:
CONFIG_CM_INIT
CONFIG_CM_REMAP
CONFIG_CM_SPD_DETECT
CONFIG_CM_MULTIPLE_SSRAM
CONFIG_CM_TCRAM
We make the first three of these options be always enabled, as that
matches usage. We select the last two based on how they were defined in
armcoremodule.h. This also allows us to remove some unused code in
board/armltd/integrator/lowlevel_init.S
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig
index d506ee5..4b5a507 100644
--- a/arch/arm/mach-integrator/Kconfig
+++ b/arch/arm/mach-integrator/Kconfig
@@ -32,14 +32,18 @@
config CM926EJ_S
bool "Core Module for ARM926EJ-STM"
select CPU_ARM926EJS
+ select CM_TCRAM
config CM946ES
bool "Core Module for ARM946E-STM"
select CPU_ARM946ES
+ select CM_MULTIPLE_SSRAM
+ select CM_TCRAM
config CM1136
bool "Core Module for ARM1136JF-STM"
select CPU_ARM1136
+ select CM_TCRAM
endchoice
@@ -56,4 +60,19 @@
config SYS_MALLOC_F_LEN
default 0x2000
+config CM_INIT
+ def_bool y
+
+config CM_REMAP
+ def_bool y
+
+config CM_SPD_DETECT
+ def_bool y
+
+config CM_MULTIPLE_SSRAM
+ bool
+
+config CM_TCRAM
+ bool
+
endmenu
diff --git a/board/armltd/integrator/integrator.c b/board/armltd/integrator/integrator.c
index 3887958..e734cea 100644
--- a/board/armltd/integrator/integrator.c
+++ b/board/armltd/integrator/integrator.c
@@ -24,6 +24,7 @@
#include <init.h>
#include <net.h>
#include <netdev.h>
+#include <armcoremodule.h>
#include <asm/global_data.h>
#include <asm/io.h>
#include <dm/platform_data/serial_pl01x.h>
diff --git a/board/armltd/integrator/lowlevel_init.S b/board/armltd/integrator/lowlevel_init.S
index 1a1cb58..ea5b654 100644
--- a/board/armltd/integrator/lowlevel_init.S
+++ b/board/armltd/integrator/lowlevel_init.S
@@ -7,6 +7,7 @@
*/
#include <config.h>
+#include <armcoremodule.h>
/* Reset using CM control register */
.global reset_cpu
@@ -41,10 +42,6 @@
/* set the desired CM specific value */
mov r2,#CMMASK_LOWVEC /* Vectors at 0x00000000 for all */
-#if defined (CONFIG_CM10200E) || defined (CONFIG_CM10220E)
- orr r2,r2,#CMMASK_INIT_102
-#else
-
#if !defined (CONFIG_CM920T) && !defined (CONFIG_CM920T_ETM) && \
!defined (CONFIG_CM940T)
@@ -69,8 +66,6 @@
#endif /* CMxx6 code */
-#endif /* ARM102xxE value */
-
/* read CM_INIT */
mov r0, #CM_BASE
ldr r1, [r0, #OS_INIT]
diff --git a/include/armcoremodule.h b/include/armcoremodule.h
index 613b884..ee839c8 100644
--- a/include/armcoremodule.h
+++ b/include/armcoremodule.h
@@ -34,42 +34,6 @@
/* CM926EJ-S */
/* CM1136-EJ-S */
-#if defined (CONFIG_CM10200E) || defined (CONFIG_CM10220E)
-#define CMMASK_INIT_102 0x00000300 /* see CM102xx ref manual */
- /* - PLL test clock bypassed */
- /* - bus clock ratio 2 */
- /* - little endian */
- /* - vectors at zero */
-#endif /* CM1022xx */
-
-/* Determine CM characteristics */
-
-#undef CONFIG_CM_MULTIPLE_SSRAM
-#undef CONFIG_CM_SPD_DETECT
-#undef CONFIG_CM_REMAP
-#undef CONFIG_CM_INIT
-#undef CONFIG_CM_TCRAM
-
-#if defined (CONFIG_CM946E_S) || defined (CONFIG_CM966E_S)
-#define CONFIG_CM_MULTIPLE_SSRAM /* CM has multiple SSRAM mapping */
-#endif
-
-/* Excalibur core module has reduced functionality */
-#ifndef CONFIG_CM922T_XA10
-#define CONFIG_CM_SPD_DETECT /* CM supports SPD query */
-#define OS_SPD 0x00000100 /* Address of SPD data */
-#define CONFIG_CM_REMAP /* CM supports remapping */
-#define CONFIG_CM_INIT /* CM has initialization reg */
-#endif /* NOT EXCALIBUR */
-
-#if defined(CONFIG_CM926EJ_S) || defined (CONFIG_CM946E_S) || \
- defined(CONFIG_CM966E_S) || defined (CONFIG_CM1026EJ_S) || \
- defined(CONFIG_CM1136JF_S)
-#define CONFIG_CM_TCRAM /* CM has TCRAM */
-#endif
-
-#ifdef CONFIG_CM_SPD_DETECT
#define OS_SPD 0x00000100 /* The SDRAM SPD data is copied here */
-#endif
#endif /* __ARMCOREMODULE_H */
diff --git a/include/configs/integrator-common.h b/include/configs/integrator-common.h
index 48d5225..d578b02 100644
--- a/include/configs/integrator-common.h
+++ b/include/configs/integrator-common.h
@@ -9,33 +9,6 @@
#define CONFIG_SYS_TIMERBASE 0x13000100 /* Timer1 */
/*
- * There are various dependencies on the core module (CM) fitted
- * Users should refer to their CM user guide
- */
-#include "armcoremodule.h"
-
-/*
- * Initialize and remap the core module, use SPD to detect memory size
- * If CONFIG_SKIP_LOWLEVEL_INIT is not defined &
- * the core module has a CM_INIT register
- * then the U-Boot initialisation code will
- * e.g. ARM Boot Monitor or pre-loader is repeated once
- * (to re-initialise any existing CM_INIT settings to safe values).
- *
- * This is usually not the desired behaviour since the platform
- * will either reboot into the ARM monitor (or pre-loader)
- * or continuously cycle thru it without U-Boot running,
- * depending upon the setting of Integrator/CP switch S2-4.
- *
- * However it may be needed if Integrator/CP switch S2-1
- * is set OFF to boot direct into U-Boot.
- * In that case comment out the line below.
- */
-#define CONFIG_CM_INIT
-#define CONFIG_CM_REMAP
-#define CONFIG_CM_SPD_DETECT
-
-/*
* The ARM boot monitor initializes the board.
* However, the default U-Boot code also performs the initialization.
* If desired, this can be prevented by defining SKIP_LOWLEVEL_INIT
diff --git a/include/configs/integratorap.h b/include/configs/integratorap.h
index f15a4d5..49f07e9 100644
--- a/include/configs/integratorap.h
+++ b/include/configs/integratorap.h
@@ -27,13 +27,4 @@
* PCI definitions
*/
-/*-----------------------------------------------------------------------
- * There are various dependencies on the core module (CM) fitted
- * Users should refer to their CM user guide
- * - when porting adjust u-boot/Makefile accordingly
- * to define the necessary CONFIG_ s for the CM involved
- * see e.g. integratorcp_CM926EJ-S_config
- */
-#include "armcoremodule.h"
-
#endif /* __CONFIG_H */