arm: dts: stm32mp15: alignment with v5.11-rc2
Device tree alignment with Linux kernel v5.11-rc2
- fix DCMI DMA features on stm32mp15 family
- Add alternate pinmux for FMC EBI bus
- Harmonize EHCI/OHCI DT nodes name on stm32mp15
- update sdmmc IP version for STM32MP15
- Add LP timer irqs on stm32mp151
- Add LP timer wakeup-source on stm32mp151
- enable HASH by default on stm32mp15
- enable CRC1 by default on stm32mp15
- enable CRYP by default on stm32mp15
- set bus-type in DCMI endpoint for stm32mp157c-ev1 board
- reorder spi4 within stm32mp15-pinctrl
- add STUSB1600 Type-C using I2C4 on stm32mp15xx-dkx
- fix mdma1 clients channel priority level on stm32mp151
- fix dmamux reg property on stm32mp151
- adjust USB OTG gadget fifo sizes in stm32mp151
- update stm32mp151 for remote proc synchronization support
- support child mfd cells for the stm32mp1 TAMP syscon
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
diff --git a/arch/arm/dts/stm32mp15-pinctrl.dtsi b/arch/arm/dts/stm32mp15-pinctrl.dtsi
index 1548329..dd4bd1e 100644
--- a/arch/arm/dts/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/dts/stm32mp15-pinctrl.dtsi
@@ -349,6 +349,61 @@
};
};
+ fmc_pins_b: fmc-1 {
+ pins {
+ pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */
+ <STM32_PINMUX('D', 5, AF12)>, /* FMC_NWE */
+ <STM32_PINMUX('B', 7, AF12)>, /* FMC_NL */
+ <STM32_PINMUX('D', 14, AF12)>, /* FMC_D0 */
+ <STM32_PINMUX('D', 15, AF12)>, /* FMC_D1 */
+ <STM32_PINMUX('D', 0, AF12)>, /* FMC_D2 */
+ <STM32_PINMUX('D', 1, AF12)>, /* FMC_D3 */
+ <STM32_PINMUX('E', 7, AF12)>, /* FMC_D4 */
+ <STM32_PINMUX('E', 8, AF12)>, /* FMC_D5 */
+ <STM32_PINMUX('E', 9, AF12)>, /* FMC_D6 */
+ <STM32_PINMUX('E', 10, AF12)>, /* FMC_D7 */
+ <STM32_PINMUX('E', 11, AF12)>, /* FMC_D8 */
+ <STM32_PINMUX('E', 12, AF12)>, /* FMC_D9 */
+ <STM32_PINMUX('E', 13, AF12)>, /* FMC_D10 */
+ <STM32_PINMUX('E', 14, AF12)>, /* FMC_D11 */
+ <STM32_PINMUX('E', 15, AF12)>, /* FMC_D12 */
+ <STM32_PINMUX('D', 8, AF12)>, /* FMC_D13 */
+ <STM32_PINMUX('D', 9, AF12)>, /* FMC_D14 */
+ <STM32_PINMUX('D', 10, AF12)>, /* FMC_D15 */
+ <STM32_PINMUX('G', 9, AF12)>, /* FMC_NE2_FMC_NCE */
+ <STM32_PINMUX('G', 12, AF12)>; /* FMC_NE4 */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <3>;
+ };
+ };
+
+ fmc_sleep_pins_b: fmc-sleep-1 {
+ pins {
+ pinmux = <STM32_PINMUX('D', 4, ANALOG)>, /* FMC_NOE */
+ <STM32_PINMUX('D', 5, ANALOG)>, /* FMC_NWE */
+ <STM32_PINMUX('B', 7, ANALOG)>, /* FMC_NL */
+ <STM32_PINMUX('D', 14, ANALOG)>, /* FMC_D0 */
+ <STM32_PINMUX('D', 15, ANALOG)>, /* FMC_D1 */
+ <STM32_PINMUX('D', 0, ANALOG)>, /* FMC_D2 */
+ <STM32_PINMUX('D', 1, ANALOG)>, /* FMC_D3 */
+ <STM32_PINMUX('E', 7, ANALOG)>, /* FMC_D4 */
+ <STM32_PINMUX('E', 8, ANALOG)>, /* FMC_D5 */
+ <STM32_PINMUX('E', 9, ANALOG)>, /* FMC_D6 */
+ <STM32_PINMUX('E', 10, ANALOG)>, /* FMC_D7 */
+ <STM32_PINMUX('E', 11, ANALOG)>, /* FMC_D8 */
+ <STM32_PINMUX('E', 12, ANALOG)>, /* FMC_D9 */
+ <STM32_PINMUX('E', 13, ANALOG)>, /* FMC_D10 */
+ <STM32_PINMUX('E', 14, ANALOG)>, /* FMC_D11 */
+ <STM32_PINMUX('E', 15, ANALOG)>, /* FMC_D12 */
+ <STM32_PINMUX('D', 8, ANALOG)>, /* FMC_D13 */
+ <STM32_PINMUX('D', 9, ANALOG)>, /* FMC_D14 */
+ <STM32_PINMUX('D', 10, ANALOG)>, /* FMC_D15 */
+ <STM32_PINMUX('G', 9, ANALOG)>, /* FMC_NE2_FMC_NCE */
+ <STM32_PINMUX('G', 12, ANALOG)>; /* FMC_NE4 */
+ };
+ };
+
i2c1_pins_a: i2c1-0 {
pins {
pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
@@ -1437,6 +1492,24 @@
};
};
+ sdmmc2_d47_pins_d: sdmmc2-d47-3 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
+ <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
+ <STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */
+ <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */
+ };
+ };
+
+ sdmmc2_d47_sleep_pins_d: sdmmc2-d47-sleep-3 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
+ <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */
+ <STM32_PINMUX('E', 5, ANALOG)>, /* SDMMC2_D6 */
+ <STM32_PINMUX('C', 7, ANALOG)>; /* SDMMC2_D7 */
+ };
+ };
+
sdmmc3_b4_pins_a: sdmmc3-b4-0 {
pins1 {
pinmux = <STM32_PINMUX('F', 0, AF9)>, /* SDMMC3_D0 */
@@ -1588,9 +1661,9 @@
};
stusb1600_pins_a: stusb1600-0 {
- pins {
- pinmux = <STM32_PINMUX('I', 11, ANALOG)>;
- bias-pull-up;
+ pins {
+ pinmux = <STM32_PINMUX('I', 11, ANALOG)>;
+ bias-pull-up;
};
};
@@ -1721,6 +1794,14 @@
};
};
+ uart8_rtscts_pins_a: uart8rtscts-0 {
+ pins {
+ pinmux = <STM32_PINMUX('G', 7, AF8)>, /* UART8_RTS */
+ <STM32_PINMUX('G', 10, AF8)>; /* UART8_CTS */
+ bias-disable;
+ };
+ };
+
usart2_pins_a: usart2-0 {
pins1 {
pinmux = <STM32_PINMUX('F', 5, AF7)>, /* USART2_TX */
diff --git a/arch/arm/dts/stm32mp151.dtsi b/arch/arm/dts/stm32mp151.dtsi
index 206d3d3..eedea6f 100644
--- a/arch/arm/dts/stm32mp151.dtsi
+++ b/arch/arm/dts/stm32mp151.dtsi
@@ -41,6 +41,13 @@
};
};
+ arm-pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>;
+ interrupt-parent = <&intc>;
+ };
+
psci {
compatible = "arm,psci-1.0";
method = "smc";
@@ -373,8 +380,10 @@
#size-cells = <0>;
compatible = "st,stm32-lptimer";
reg = <0x40009000 0x400>;
+ interrupts-extended = <&exti 47 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rcc LPTIM1_K>;
clock-names = "mux";
+ wakeup-source;
status = "disabled";
pwm {
@@ -1010,7 +1019,7 @@
dmamux1: dma-router@48002000 {
compatible = "st,stm32h7-dmamux";
- reg = <0x48002000 0x1c>;
+ reg = <0x48002000 0x40>;
#dma-cells = <3>;
dma-requests = <128>;
dma-masters = <&dma1 &dma2>;
@@ -1058,7 +1067,7 @@
sdmmc3: sdmmc@48004000 {
compatible = "arm,pl18x", "arm,primecell";
- arm,primecell-periphid = <0x10153180>;
+ arm,primecell-periphid = <0x00253180>;
reg = <0x48004000 0x400>;
interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
@@ -1079,9 +1088,9 @@
resets = <&rcc USBO_R>;
reset-names = "dwc2";
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
- g-rx-fifo-size = <256>;
+ g-rx-fifo-size = <512>;
g-np-tx-fifo-size = <32>;
- g-tx-fifo-size = <128 128 64 64 64 64 32 32>;
+ g-tx-fifo-size = <256 16 16 16 16 16 16 16>;
dr_mode = "otg";
usb33d-supply = <&usb33>;
status = "disabled";
@@ -1117,7 +1126,7 @@
resets = <&rcc CAMITF_R>;
clocks = <&rcc DCMI>;
clock-names = "mclk";
- dmas = <&dmamux1 75 0x400 0x0d>;
+ dmas = <&dmamux1 75 0x400 0x01>;
dma-names = "tx";
status = "disabled";
};
@@ -1175,8 +1184,10 @@
#size-cells = <0>;
compatible = "st,stm32-lptimer";
reg = <0x50021000 0x400>;
+ interrupts-extended = <&exti 48 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rcc LPTIM2_K>;
clock-names = "mux";
+ wakeup-source;
status = "disabled";
pwm {
@@ -1202,8 +1213,10 @@
#size-cells = <0>;
compatible = "st,stm32-lptimer";
reg = <0x50022000 0x400>;
+ interrupts-extended = <&exti 50 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rcc LPTIM3_K>;
clock-names = "mux";
+ wakeup-source;
status = "disabled";
pwm {
@@ -1222,8 +1235,10 @@
lptimer4: timer@50023000 {
compatible = "st,stm32-lptimer";
reg = <0x50023000 0x400>;
+ interrupts-extended = <&exti 52 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rcc LPTIM4_K>;
clock-names = "mux";
+ wakeup-source;
status = "disabled";
pwm {
@@ -1236,8 +1251,10 @@
lptimer5: timer@50024000 {
compatible = "st,stm32-lptimer";
reg = <0x50024000 0x400>;
+ interrupts-extended = <&exti 53 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rcc LPTIM5_K>;
clock-names = "mux";
+ wakeup-source;
status = "disabled";
pwm {
@@ -1303,7 +1320,7 @@
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rcc HASH1>;
resets = <&rcc HASH1_R>;
- dmas = <&mdma1 31 0x10 0x1000A02 0x0 0x0>;
+ dmas = <&mdma1 31 0x2 0x1000A02 0x0 0x0>;
dma-names = "in";
dma-maxburst = <2>;
status = "disabled";
@@ -1367,8 +1384,8 @@
reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
reg-names = "qspi", "qspi_mm";
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&mdma1 22 0x10 0x100002 0x0 0x0>,
- <&mdma1 22 0x10 0x100008 0x0 0x0>;
+ dmas = <&mdma1 22 0x2 0x100002 0x0 0x0>,
+ <&mdma1 22 0x2 0x100008 0x0 0x0>;
dma-names = "tx", "rx";
clocks = <&rcc QSPI_K>;
resets = <&rcc QSPI_R>;
@@ -1379,7 +1396,7 @@
sdmmc1: sdmmc@58005000 {
compatible = "arm,pl18x", "arm,primecell";
- arm,primecell-periphid = <0x10153180>;
+ arm,primecell-periphid = <0x00253180>;
reg = <0x58005000 0x1000>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
@@ -1394,7 +1411,7 @@
sdmmc2: sdmmc@58007000 {
compatible = "arm,pl18x", "arm,primecell";
- arm,primecell-periphid = <0x10153180>;
+ arm,primecell-periphid = <0x00253180>;
reg = <0x58007000 0x1000>;
interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cmd_irq";
@@ -1445,7 +1462,7 @@
status = "disabled";
};
- usbh_ohci: usbh-ohci@5800c000 {
+ usbh_ohci: usb@5800c000 {
compatible = "generic-ohci";
reg = <0x5800c000 0x1000>;
clocks = <&rcc USBH>;
@@ -1454,7 +1471,7 @@
status = "disabled";
};
- usbh_ehci: usbh-ehci@5800d000 {
+ usbh_ehci: usb@5800d000 {
compatible = "generic-ehci";
reg = <0x5800d000 0x1000>;
clocks = <&rcc USBH>;
@@ -1587,6 +1604,11 @@
status = "disabled";
};
+ tamp: tamp@5c00a000 {
+ compatible = "st,stm32-tamp", "syscon", "simple-mfd";
+ reg = <0x5c00a000 0x400>;
+ };
+
/*
* Break node order to solve dependency probe issue between
* pinctrl and exti.
@@ -1765,6 +1787,8 @@
st,syscfg-holdboot = <&rcc 0x10C 0x1>;
st,syscfg-tz = <&rcc 0x000 0x1>;
st,syscfg-pdds = <&pwr_mcu 0x0 0x1>;
+ st,syscfg-rsc-tbl = <&tamp 0x144 0xFFFFFFFF>;
+ st,syscfg-m4-state = <&tamp 0x148 0xFFFFFFFF>;
status = "disabled";
};
};
diff --git a/arch/arm/dts/stm32mp153.dtsi b/arch/arm/dts/stm32mp153.dtsi
index 6d9ab08..1c1889b 100644
--- a/arch/arm/dts/stm32mp153.dtsi
+++ b/arch/arm/dts/stm32mp153.dtsi
@@ -16,6 +16,12 @@
};
};
+ arm-pmu {
+ interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>;
+ };
+
soc {
m_can1: can@4400e000 {
compatible = "bosch,m_can";
diff --git a/arch/arm/dts/stm32mp157c-dk2.dts b/arch/arm/dts/stm32mp157c-dk2.dts
index 0456365..2bc92ef 100644
--- a/arch/arm/dts/stm32mp157c-dk2.dts
+++ b/arch/arm/dts/stm32mp157c-dk2.dts
@@ -29,6 +29,10 @@
};
};
+&cryp1 {
+ status = "okay";
+};
+
&dsi {
status = "okay";
phy-dsi-supply = <®18>;
diff --git a/arch/arm/dts/stm32mp157c-ed1.dts b/arch/arm/dts/stm32mp157c-ed1.dts
index dd911c9..6e89f88 100644
--- a/arch/arm/dts/stm32mp157c-ed1.dts
+++ b/arch/arm/dts/stm32mp157c-ed1.dts
@@ -89,6 +89,14 @@
states = <1800000 0x1>,
<2900000 0x0>;
};
+
+ vin: vin {
+ compatible = "regulator-fixed";
+ regulator-name = "vin";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
};
&adc {
@@ -115,6 +123,14 @@
cpu-supply = <&vddcore>;
};
+&crc1 {
+ status = "okay";
+};
+
+&cryp1 {
+ status = "okay";
+};
+
&dac {
pinctrl-names = "default";
pinctrl-0 = <&dac_ch1_pins_a &dac_ch2_pins_a>;
@@ -136,6 +152,10 @@
contiguous-area = <&gpu_reserved>;
};
+&hash1 {
+ status = "okay";
+};
+
&i2c4 {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c4_pins_a>;
@@ -158,11 +178,18 @@
regulators {
compatible = "st,stpmic1-regulators";
+ buck1-supply = <&vin>;
+ buck2-supply = <&vin>;
+ buck3-supply = <&vin>;
+ buck4-supply = <&vin>;
ldo1-supply = <&v3v3>;
ldo2-supply = <&v3v3>;
ldo3-supply = <&vdd_ddr>;
+ ldo4-supply = <&vin>;
ldo5-supply = <&v3v3>;
ldo6-supply = <&v3v3>;
+ vref_ddr-supply = <&vin>;
+ boost-supply = <&vin>;
pwr_sw1-supply = <&bst_out>;
pwr_sw2-supply = <&bst_out>;
diff --git a/arch/arm/dts/stm32mp157c-ev1.dts b/arch/arm/dts/stm32mp157c-ev1.dts
index a55e80c..5c5b1dd 100644
--- a/arch/arm/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/dts/stm32mp157c-ev1.dts
@@ -90,6 +90,7 @@
port {
dcmi_0: endpoint {
remote-endpoint = <&ov5640_0>;
+ bus-type = <5>;
bus-width = <8>;
hsync-active = <0>;
vsync-active = <0>;
diff --git a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi
index 6868769..11bc247 100644
--- a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi
@@ -76,61 +76,6 @@
pinctrl-1 = <&fmc_sleep_pins_b &mco2_sleep_pins_a>;
pinctrl-names = "default", "sleep";
- fmc_pins_b: fmc-0 {
- pins1 {
- pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */
- <STM32_PINMUX('D', 5, AF12)>, /* FMC_NWE */
- <STM32_PINMUX('B', 7, AF12)>, /* FMC_NL */
- <STM32_PINMUX('D', 14, AF12)>, /* FMC_D0 */
- <STM32_PINMUX('D', 15, AF12)>, /* FMC_D1 */
- <STM32_PINMUX('D', 0, AF12)>, /* FMC_D2 */
- <STM32_PINMUX('D', 1, AF12)>, /* FMC_D3 */
- <STM32_PINMUX('E', 7, AF12)>, /* FMC_D4 */
- <STM32_PINMUX('E', 8, AF12)>, /* FMC_D5 */
- <STM32_PINMUX('E', 9, AF12)>, /* FMC_D6 */
- <STM32_PINMUX('E', 10, AF12)>, /* FMC_D7 */
- <STM32_PINMUX('E', 11, AF12)>, /* FMC_D8 */
- <STM32_PINMUX('E', 12, AF12)>, /* FMC_D9 */
- <STM32_PINMUX('E', 13, AF12)>, /* FMC_D10 */
- <STM32_PINMUX('E', 14, AF12)>, /* FMC_D11 */
- <STM32_PINMUX('E', 15, AF12)>, /* FMC_D12 */
- <STM32_PINMUX('D', 8, AF12)>, /* FMC_D13 */
- <STM32_PINMUX('D', 9, AF12)>, /* FMC_D14 */
- <STM32_PINMUX('D', 10, AF12)>, /* FMC_D15 */
- <STM32_PINMUX('G', 9, AF12)>, /* FMC_NE2_FMC_NCE */
- <STM32_PINMUX('G', 12, AF12)>; /* FMC_NE4 */
- bias-disable;
- drive-push-pull;
- slew-rate = <3>;
- };
- };
-
- fmc_sleep_pins_b: fmc-sleep-0 {
- pins {
- pinmux = <STM32_PINMUX('D', 4, ANALOG)>, /* FMC_NOE */
- <STM32_PINMUX('D', 5, ANALOG)>, /* FMC_NWE */
- <STM32_PINMUX('B', 7, ANALOG)>, /* FMC_NL */
- <STM32_PINMUX('D', 14, ANALOG)>, /* FMC_D0 */
- <STM32_PINMUX('D', 15, ANALOG)>, /* FMC_D1 */
- <STM32_PINMUX('D', 0, ANALOG)>, /* FMC_D2 */
- <STM32_PINMUX('D', 1, ANALOG)>, /* FMC_D3 */
- <STM32_PINMUX('E', 7, ANALOG)>, /* FMC_D4 */
- <STM32_PINMUX('E', 8, ANALOG)>, /* FMC_D5 */
- <STM32_PINMUX('E', 9, ANALOG)>, /* FMC_D6 */
- <STM32_PINMUX('E', 10, ANALOG)>, /* FMC_D7 */
- <STM32_PINMUX('E', 11, ANALOG)>, /* FMC_D8 */
- <STM32_PINMUX('E', 12, ANALOG)>, /* FMC_D9 */
- <STM32_PINMUX('E', 13, ANALOG)>, /* FMC_D10 */
- <STM32_PINMUX('E', 14, ANALOG)>, /* FMC_D11 */
- <STM32_PINMUX('E', 15, ANALOG)>, /* FMC_D12 */
- <STM32_PINMUX('D', 8, ANALOG)>, /* FMC_D13 */
- <STM32_PINMUX('D', 9, ANALOG)>, /* FMC_D14 */
- <STM32_PINMUX('D', 10, ANALOG)>, /* FMC_D15 */
- <STM32_PINMUX('G', 9, ANALOG)>, /* FMC_NE2_FMC_NCE */
- <STM32_PINMUX('G', 12, ANALOG)>; /* FMC_NE4 */
- };
- };
-
mco2_pins_a: mco2-0 {
pins {
pinmux = <STM32_PINMUX('G', 2, AF1)>; /* MCO2 */
diff --git a/arch/arm/dts/stm32mp15xx-dkx.dtsi b/arch/arm/dts/stm32mp15xx-dkx.dtsi
index aa4aa83..68987f6 100644
--- a/arch/arm/dts/stm32mp15xx-dkx.dtsi
+++ b/arch/arm/dts/stm32mp15xx-dkx.dtsi
@@ -80,6 +80,14 @@
dais = <&sai2a_port &sai2b_port &i2s2_port>;
status = "okay";
};
+
+ vin: vin {
+ compatible = "regulator-fixed";
+ regulator-name = "vin";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
};
&adc {
@@ -116,6 +124,10 @@
status = "okay";
};
+&crc1 {
+ status = "okay";
+};
+
&dts {
status = "okay";
};
@@ -151,6 +163,10 @@
contiguous-area = <&gpu_reserved>;
};
+&hash1 {
+ status = "okay";
+};
+
&i2c1 {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c1_pins_a>;
@@ -238,21 +254,27 @@
/delete-property/dmas;
/delete-property/dma-names;
- typec: stusb1600@28 {
+ stusb1600@28 {
compatible = "st,stusb1600";
reg = <0x28>;
interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
interrupt-parent = <&gpioi>;
pinctrl-names = "default";
pinctrl-0 = <&stusb1600_pins_a>;
-
status = "okay";
+ vdd-supply = <&vin>;
- typec_con: connector {
+ connector {
compatible = "usb-c-connector";
label = "USB-C";
- power-role = "sink";
- power-opmode = "default";
+ power-role = "dual";
+ typec-power-opmode = "default";
+
+ port {
+ con_usbotg_hs_ep: endpoint {
+ remote-endpoint = <&usbotg_hs_ep>;
+ };
+ };
};
};
@@ -266,9 +288,18 @@
regulators {
compatible = "st,stpmic1-regulators";
+ buck1-supply = <&vin>;
+ buck2-supply = <&vin>;
+ buck3-supply = <&vin>;
+ buck4-supply = <&vin>;
ldo1-supply = <&v3v3>;
+ ldo2-supply = <&vin>;
ldo3-supply = <&vdd_ddr>;
+ ldo4-supply = <&vin>;
+ ldo5-supply = <&vin>;
ldo6-supply = <&v3v3>;
+ vref_ddr-supply = <&vin>;
+ boost-supply = <&vin>;
pwr_sw1-supply = <&bst_out>;
pwr_sw2-supply = <&bst_out>;
@@ -657,6 +688,12 @@
phy-names = "usb2-phy";
usb-role-switch;
status = "okay";
+
+ port {
+ usbotg_hs_ep: endpoint {
+ remote-endpoint = <&con_usbotg_hs_ep>;
+ };
+ };
};
&usbphyc {