board: tbs2910: Add pinctrl driver and convert gpio to driver model
We need this for additional driver model conversions.
Signed-off-by: Soeren Moch <smoch@web.de>
diff --git a/board/tbs/tbs2910/tbs2910.c b/board/tbs/tbs2910/tbs2910.c
index 99b282c..175dd88 100644
--- a/board/tbs/tbs2910/tbs2910.c
+++ b/board/tbs/tbs2910/tbs2910.c
@@ -138,6 +138,7 @@
imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads));
/* Reset AR8035 PHY */
+ gpio_request(IMX_GPIO_NR(1, 25), "ETH_PHY_RESET");
gpio_direction_output(IMX_GPIO_NR(1, 25) , 0);
udelay(500);
gpio_set_value(IMX_GPIO_NR(1, 25), 1);
@@ -230,12 +231,14 @@
case 0:
imx_iomux_v3_setup_multiple_pads(
usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
+ gpio_request(USDHC2_CD_GPIO, "MMC0_CD");
gpio_direction_input(USDHC2_CD_GPIO);
usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
break;
case 1:
imx_iomux_v3_setup_multiple_pads(
usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
+ gpio_request(USDHC3_CD_GPIO, "MMC1_CD");
gpio_direction_input(USDHC3_CD_GPIO);
usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
break;
diff --git a/configs/tbs2910_defconfig b/configs/tbs2910_defconfig
index 3cc68eb..717cabf 100644
--- a/configs/tbs2910_defconfig
+++ b/configs/tbs2910_defconfig
@@ -42,10 +42,13 @@
CONFIG_ENV_IS_IN_MMC=y
CONFIG_DM=y
CONFIG_DWC_AHSATA=y
+CONFIG_DM_GPIO=y
CONFIG_FSL_ESDHC=y
CONFIG_PHYLIB=y
CONFIG_MII=y
CONFIG_PCI=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX6=y
CONFIG_DM_THERMAL=y
CONFIG_USB=y
CONFIG_USB_STORAGE=y