Convert CONFIG_PCI_SCAN_SHOW to Kconfig
This converts the following to Kconfig:
CONFIG_PCI_SCAN_SHOW
Signed-off-by: Tom Rini <trini@konsulko.com>
diff --git a/configs/ge_bx50v3_defconfig b/configs/ge_bx50v3_defconfig
index 114a361..c332878 100644
--- a/configs/ge_bx50v3_defconfig
+++ b/configs/ge_bx50v3_defconfig
@@ -74,6 +74,7 @@
CONFIG_FEC_MXC=y
CONFIG_MII=y
CONFIG_PCI=y
+CONFIG_PCI_SCAN_SHOW=y
CONFIG_PCIE_IMX=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
diff --git a/configs/mx6sabresd_defconfig b/configs/mx6sabresd_defconfig
index f5ad366..ea0c764 100644
--- a/configs/mx6sabresd_defconfig
+++ b/configs/mx6sabresd_defconfig
@@ -97,6 +97,7 @@
CONFIG_RGMII=y
CONFIG_MII=y
CONFIG_PCI=y
+CONFIG_PCI_SCAN_SHOW=y
CONFIG_PCIE_IMX=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
diff --git a/configs/mx6sxsabresd_defconfig b/configs/mx6sxsabresd_defconfig
index 9a9e0da..1985ff9 100644
--- a/configs/mx6sxsabresd_defconfig
+++ b/configs/mx6sxsabresd_defconfig
@@ -60,6 +60,7 @@
CONFIG_FEC_MXC=y
CONFIG_MII=y
CONFIG_PCI=y
+CONFIG_PCI_SCAN_SHOW=y
CONFIG_PCIE_IMX=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
diff --git a/configs/novena_defconfig b/configs/novena_defconfig
index f156296..d4ab938 100644
--- a/configs/novena_defconfig
+++ b/configs/novena_defconfig
@@ -75,6 +75,7 @@
CONFIG_FEC_MXC=y
CONFIG_RGMII=y
CONFIG_MII=y
+CONFIG_PCI_SCAN_SHOW=y
CONFIG_PCIE_IMX=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
diff --git a/configs/tbs2910_defconfig b/configs/tbs2910_defconfig
index 0401dc6..892d7c6 100644
--- a/configs/tbs2910_defconfig
+++ b/configs/tbs2910_defconfig
@@ -83,6 +83,7 @@
CONFIG_MII=y
CONFIG_PCI=y
# CONFIG_PCI_PNP is not set
+CONFIG_PCI_SCAN_SHOW=y
CONFIG_PCIE_IMX=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
diff --git a/configs/vining_2000_defconfig b/configs/vining_2000_defconfig
index ad534ab..8d87857 100644
--- a/configs/vining_2000_defconfig
+++ b/configs/vining_2000_defconfig
@@ -84,6 +84,7 @@
CONFIG_FEC_MXC=y
CONFIG_MII=y
CONFIG_PCI=y
+CONFIG_PCI_SCAN_SHOW=y
CONFIG_PCIE_IMX=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 0c74f95..f4c4aec 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -81,6 +81,10 @@
support on PCI devices. This helps to skip some devices in BDF
scan that are not present.
+config PCI_SCAN_SHOW
+ bool "Show PCI devices during startup"
+ depends on PCIE_IMX
+
config PCIE_ECAM_GENERIC
bool "Generic ECAM-based PCI host controller support"
help
diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h
index 8e75d77..e8e0a1c 100644
--- a/include/configs/MPC837XERDB.h
+++ b/include/configs/MPC837XERDB.h
@@ -232,10 +232,6 @@
#define CONFIG_SYS_PCIE2_IO_PHYS 0xD8000000
#define CONFIG_SYS_PCIE2_IO_SIZE 0x00800000
-#ifdef CONFIG_PCI
-#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#endif /* CONFIG_PCI */
-
/*
* TSEC
*/
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index bec2ca0..2eb3381 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -312,10 +312,6 @@
#endif
#define CONFIG_SYS_SRIO1_MEM_SIZE 0x20000000 /* 512M */
-#if defined(CONFIG_PCI)
-#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#endif /* CONFIG_PCI */
-
#if defined(CONFIG_TSEC_ENET)
#define CONFIG_TSEC1 1
diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
index 5f64bd9..aea744c 100644
--- a/include/configs/P1010RDB.h
+++ b/include/configs/P1010RDB.h
@@ -94,8 +94,6 @@
#else
#define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000
#endif
-
-#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#endif
#define CONFIG_HWCONFIG
diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h
index d7df579..e019c16 100644
--- a/include/configs/P2041RDB.h
+++ b/include/configs/P2041RDB.h
@@ -321,10 +321,6 @@
#define CONFIG_SYS_DPAA_PME
#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#endif /* CONFIG_PCI */
-
#ifdef CONFIG_FMAN_ENET
#define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR 0x2
#define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR 0x3
diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h
index cdae8a8..a519b5a 100644
--- a/include/configs/T102xRDB.h
+++ b/include/configs/T102xRDB.h
@@ -377,8 +377,6 @@
#define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000
#define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull
#endif
-
-#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#endif /* CONFIG_PCI */
/*
diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h
index 8222c67..3a7c643 100644
--- a/include/configs/T104xRDB.h
+++ b/include/configs/T104xRDB.h
@@ -362,8 +362,6 @@
#define CONFIG_SYS_PCIE4_IO_VIRT 0xf8030000
#define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull
#endif
-
-#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#endif /* CONFIG_PCI */
/*
diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h
index 53fc49f..eff22c1 100644
--- a/include/configs/T208xQDS.h
+++ b/include/configs/T208xQDS.h
@@ -391,10 +391,6 @@
#define CONFIG_SYS_PCIE4_MEM_PHYS 0xc40000000ull
#define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#endif
-
/* Qman/Bman */
#ifndef CONFIG_NOBQFMAN
#define CONFIG_SYS_BMAN_NUM_PORTALS 18
diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h
index b3648ae..ba9bfdd 100644
--- a/include/configs/T208xRDB.h
+++ b/include/configs/T208xRDB.h
@@ -344,10 +344,6 @@
#define CONFIG_SYS_PCIE4_MEM_PHYS 0xc40000000ull
#define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#endif
-
/* Qman/Bman */
#ifndef CONFIG_NOBQFMAN
#define CONFIG_SYS_BMAN_NUM_PORTALS 18
diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h
index 3edae6b..12b479f 100644
--- a/include/configs/T4240RDB.h
+++ b/include/configs/T4240RDB.h
@@ -138,10 +138,6 @@
#define CONFIG_SYS_PCIE4_MEM_PHYS 0xc60000000ull
#define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#endif /* CONFIG_PCI */
-
/*
* Environment
*/
diff --git a/include/configs/apalis-tk1.h b/include/configs/apalis-tk1.h
index a362282..6a4092a 100644
--- a/include/configs/apalis-tk1.h
+++ b/include/configs/apalis-tk1.h
@@ -19,9 +19,6 @@
#define FDT_MODULE "apalis-v1.2"
#define FDT_MODULE_V1_0 "apalis"
-/* PCI host support */
-#undef CONFIG_PCI_SCAN_SHOW
-
/*
* Custom Distro Boot configuration:
* 1. 8bit SD port (MMC1)
diff --git a/include/configs/clearfog.h b/include/configs/clearfog.h
index 9969269..9c9e950 100644
--- a/include/configs/clearfog.h
+++ b/include/configs/clearfog.h
@@ -28,9 +28,6 @@
#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
-/* PCIe support */
-#define CONFIG_PCI_SCAN_SHOW
-
/* Keep device tree and initrd in lower memory so the kernel can access them */
#define RELOCATION_LIMITS_ENV_SETTINGS \
"fdt_high=0x10000000\0" \
diff --git a/include/configs/controlcenterdc.h b/include/configs/controlcenterdc.h
index bb1595f..5da2778 100644
--- a/include/configs/controlcenterdc.h
+++ b/include/configs/controlcenterdc.h
@@ -17,9 +17,6 @@
#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
-/* PCIe support */
-#define CONFIG_PCI_SCAN_SHOW
-
/*
* Environment Configuration
*/
diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h
index 59ec064..2252bf8 100644
--- a/include/configs/corenet_ds.h
+++ b/include/configs/corenet_ds.h
@@ -314,10 +314,6 @@
#define CONFIG_SYS_DPAA_PME
#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#endif /* CONFIG_PCI */
-
#ifdef CONFIG_FMAN_ENET
#define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR 0x1c
#define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR 0x1d
diff --git a/include/configs/db-88f6820-amc.h b/include/configs/db-88f6820-amc.h
index 6912f39..b9d03d2 100644
--- a/include/configs/db-88f6820-amc.h
+++ b/include/configs/db-88f6820-amc.h
@@ -14,9 +14,6 @@
#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
-/* PCIe support */
-#define CONFIG_PCI_SCAN_SHOW
-
/* NAND */
/* Keep device tree and initrd in lower memory so the kernel can access them */
diff --git a/include/configs/db-88f6820-gp.h b/include/configs/db-88f6820-gp.h
index 3b3a7ab..bba2b60 100644
--- a/include/configs/db-88f6820-gp.h
+++ b/include/configs/db-88f6820-gp.h
@@ -17,9 +17,6 @@
#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
-/* PCIe support */
-#define CONFIG_PCI_SCAN_SHOW
-
/* Keep device tree and initrd in lower memory so the kernel can access them */
#define CONFIG_EXTRA_ENV_SETTINGS \
"fdt_high=0x10000000\0" \
diff --git a/include/configs/db-mv784mp-gp.h b/include/configs/db-mv784mp-gp.h
index 715a6d7..7b30595 100644
--- a/include/configs/db-mv784mp-gp.h
+++ b/include/configs/db-mv784mp-gp.h
@@ -21,9 +21,6 @@
#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
-/* PCIe support */
-#define CONFIG_PCI_SCAN_SHOW
-
/* NAND */
/*
diff --git a/include/configs/ds414.h b/include/configs/ds414.h
index 7e3f657..f8273a9 100644
--- a/include/configs/ds414.h
+++ b/include/configs/ds414.h
@@ -19,9 +19,6 @@
/* I2C */
#define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE
-/* PCIe support */
-#define CONFIG_PCI_SCAN_SHOW
-
/*
* mv-common.h should be defined after CMD configs since it used them
* to enable certain macros
diff --git a/include/configs/durian.h b/include/configs/durian.h
index c224511..7971df8 100644
--- a/include/configs/durian.h
+++ b/include/configs/durian.h
@@ -13,9 +13,6 @@
#define PHYS_SDRAM_1_SIZE 0x7B000000
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-/* PCI CONFIG */
-#define CONFIG_PCI_SCAN_SHOW
-
/* BOOT */
#define CONFIG_SYS_BOOTM_LEN (60 * 1024 * 1024)
diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h
index b4638a2..ad00769 100644
--- a/include/configs/ge_bx50v3.h
+++ b/include/configs/ge_bx50v3.h
@@ -109,6 +109,4 @@
#define CONFIG_IMX6_PWM_PER_CLK 66000000
-#define CONFIG_PCI_SCAN_SHOW
-
#endif /* __GE_BX50V3_CONFIG_H */
diff --git a/include/configs/helios4.h b/include/configs/helios4.h
index ff2c506..fc32487 100644
--- a/include/configs/helios4.h
+++ b/include/configs/helios4.h
@@ -28,9 +28,6 @@
#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
-/* PCIe support */
-#define CONFIG_PCI_SCAN_SHOW
-
/* Keep device tree and initrd in lower memory so the kernel can access them */
#define RELOCATION_LIMITS_ENV_SETTINGS \
"fdt_high=0x10000000\0" \
diff --git a/include/configs/ls1012afrwy.h b/include/configs/ls1012afrwy.h
index ee67215..a0ff3b8 100644
--- a/include/configs/ls1012afrwy.h
+++ b/include/configs/ls1012afrwy.h
@@ -25,8 +25,6 @@
func(USB, usb, 0) \
func(DHCP, dhcp, na)
-#define CONFIG_PCI_SCAN_SHOW
-
#undef CONFIG_EXTRA_ENV_SETTINGS
#define CONFIG_EXTRA_ENV_SETTINGS \
"verify=no\0" \
diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h
index 9dbf1a7..b124ce5 100644
--- a/include/configs/ls1012aqds.h
+++ b/include/configs/ls1012aqds.h
@@ -82,8 +82,6 @@
DSPI_CTAR_CSSCK(2) | DSPI_CTAR_ASC(0) | \
DSPI_CTAR_DT(0))
-#define CONFIG_PCI_SCAN_SHOW
-
#undef CONFIG_EXTRA_ENV_SETTINGS
#define CONFIG_EXTRA_ENV_SETTINGS \
"verify=no\0" \
diff --git a/include/configs/ls1012ardb.h b/include/configs/ls1012ardb.h
index f71ab2c..4f77acd 100644
--- a/include/configs/ls1012ardb.h
+++ b/include/configs/ls1012ardb.h
@@ -36,8 +36,6 @@
#define __PHY_ETH2_MASK 0xFB
#define __PHY_ETH1_MASK 0xFD
-#define CONFIG_PCI_SCAN_SHOW
-
#undef CONFIG_EXTRA_ENV_SETTINGS
#define CONFIG_EXTRA_ENV_SETTINGS \
"verify=no\0" \
diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h
index 6556f1a..ec68874 100644
--- a/include/configs/ls1021aiot.h
+++ b/include/configs/ls1021aiot.h
@@ -99,10 +99,6 @@
#define FSL_PCIE_COMPAT "fsl,ls1021a-pcie"
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_SCAN_SHOW
-#endif
-
#define CONFIG_PEN_ADDR_BIG_ENDIAN
#define CONFIG_SMP_PEN_ADDR 0x01ee0200
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index 00825b3..1a46f72 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -301,10 +301,6 @@
#endif
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_SCAN_SHOW
-#endif
-
#define CONFIG_PEN_ADDR_BIG_ENDIAN
#define CONFIG_SMP_PEN_ADDR 0x01ee0200
diff --git a/include/configs/ls1021atsn.h b/include/configs/ls1021atsn.h
index 791df84..e5754c9 100644
--- a/include/configs/ls1021atsn.h
+++ b/include/configs/ls1021atsn.h
@@ -81,9 +81,6 @@
/* PCIe */
#define FSL_PCIE_COMPAT "fsl,ls1021a-pcie"
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_SCAN_SHOW
-#endif
#define CONFIG_HWCONFIG
#define HWCONFIG_BUFFER_SIZE 256
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index 921399e..09dce21 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -171,10 +171,6 @@
#define CONFIG_SYS_I2C_EEPROM_NXID
#define CONFIG_SYS_EEPROM_BUS_NUM 1
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_SCAN_SHOW
-#endif
-
#define CONFIG_PEN_ADDR_BIG_ENDIAN
#define CONFIG_SMP_PEN_ADDR 0x01ee0200
diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h
index db00a0a..ed32e20 100644
--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@@ -108,13 +108,6 @@
/* I2C */
-/* PCIe */
-#ifndef SPL_NO_PCIE
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_SCAN_SHOW
-#endif
-#endif
-
/* DSPI */
/* FMan ucode */
diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h
index 3a110677..94118c4 100644
--- a/include/configs/ls1046a_common.h
+++ b/include/configs/ls1046a_common.h
@@ -76,10 +76,6 @@
/* I2C */
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_SCAN_SHOW
-#endif
-
/* SATA */
#ifndef SPL_NO_SATA
#define CONFIG_SYS_SATA AHCI_BASE_ADDR
diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h
index 9de602bc..9ba7258 100644
--- a/include/configs/ls2080aqds.h
+++ b/include/configs/ls2080aqds.h
@@ -251,10 +251,6 @@
#define CONFIG_FSL_MEMAC
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_SCAN_SHOW
-#endif
-
/* Initial environment variables */
#undef CONFIG_EXTRA_ENV_SETTINGS
#ifdef CONFIG_NXP_ESBC
diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index 9c4d2fe..a504a0e 100644
--- a/include/configs/ls2080ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -238,10 +238,6 @@
#define CONFIG_FSL_MEMAC
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_SCAN_SHOW
-#endif
-
#define BOOT_TARGET_DEVICES(func) \
func(USB, usb, 0) \
func(MMC, mmc, 0) \
diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h
index bc3a004..77e2582 100644
--- a/include/configs/lx2160a_common.h
+++ b/include/configs/lx2160a_common.h
@@ -89,11 +89,6 @@
/* Qixis */
#define CONFIG_SYS_I2C_FPGA_ADDR 0x66
-/* PCI */
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_SCAN_SHOW
-#endif
-
/* USB */
#define COUNTER_FREQUENCY_REAL (get_board_sys_clk() / 4)
diff --git a/include/configs/mx6sabresd.h b/include/configs/mx6sabresd.h
index 8451545..16f8858 100644
--- a/include/configs/mx6sabresd.h
+++ b/include/configs/mx6sabresd.h
@@ -24,7 +24,6 @@
#define CONFIG_SYS_FSL_USDHC_NUM 3
#ifdef CONFIG_CMD_PCI
-#define CONFIG_PCI_SCAN_SHOW
#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12)
#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(3, 19)
#endif
diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h
index fe3cb1e..58d550f 100644
--- a/include/configs/mx6sxsabresd.h
+++ b/include/configs/mx6sxsabresd.h
@@ -129,7 +129,6 @@
#endif
#ifdef CONFIG_CMD_PCI
-#define CONFIG_PCI_SCAN_SHOW
#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(2, 0)
#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(2, 1)
#endif
diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h
index ff9cb12..2007b48 100644
--- a/include/configs/nitrogen6x.h
+++ b/include/configs/nitrogen6x.h
@@ -97,11 +97,4 @@
/* Environment organization */
-/*
- * PCI express
- */
-#ifdef CONFIG_CMD_PCI
-#define CONFIG_PCI_SCAN_SHOW
-#endif
-
#endif /* __CONFIG_H */
diff --git a/include/configs/novena.h b/include/configs/novena.h
index 54afcf6..1696aa2 100644
--- a/include/configs/novena.h
+++ b/include/configs/novena.h
@@ -48,7 +48,6 @@
/* PCI express */
#ifdef CONFIG_CMD_PCI
-#define CONFIG_PCI_SCAN_SHOW
#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(3, 29)
#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(7, 12)
#endif
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index a639dba..f4bf2ab 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -384,8 +384,6 @@
#else
#define CONFIG_SYS_PCIE1_IO_PHYS 0xffc00000
#endif
-
-#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#endif /* CONFIG_PCI */
#if defined(CONFIG_TSEC_ENET)
diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h
index 357811f..c93df00 100644
--- a/include/configs/tbs2910.h
+++ b/include/configs/tbs2910.h
@@ -26,7 +26,6 @@
/* PCI */
#ifdef CONFIG_CMD_PCI
-#define CONFIG_PCI_SCAN_SHOW
#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12)
#endif
diff --git a/include/configs/vining_2000.h b/include/configs/vining_2000.h
index beaff28..6eb022f 100644
--- a/include/configs/vining_2000.h
+++ b/include/configs/vining_2000.h
@@ -45,7 +45,6 @@
#define CONFIG_MXC_USB_FLAGS 0
#ifdef CONFIG_CMD_PCI
-#define CONFIG_PCI_SCAN_SHOW
#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(4, 6)
#endif
diff --git a/include/configs/x530.h b/include/configs/x530.h
index 1f1b4e1..cb12683 100644
--- a/include/configs/x530.h
+++ b/include/configs/x530.h
@@ -47,9 +47,6 @@
#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
-/* PCIe support */
-#define CONFIG_PCI_SCAN_SHOW
-
/* NAND */
#include <asm/arch/config.h>