Tegra: Move common clock code to arch/arm/cpu/tegra-common/clock.c
This 'commonizes' much of the clock/pll code. SoC-dependent code
and tables are left in arch/cpu/tegraXXX-common/clock.c
Some T30 tables needed whitespace fixes due to checkpatch complaints.
Signed-off-by: Tom Warren <twarren@nvidia.com>
diff --git a/arch/arm/cpu/tegra-common/Makefile b/arch/arm/cpu/tegra-common/Makefile
index 38e90d3..8e95c7e 100644
--- a/arch/arm/cpu/tegra-common/Makefile
+++ b/arch/arm/cpu/tegra-common/Makefile
@@ -28,7 +28,7 @@
LIB = $(obj)libcputegra-common.o
SOBJS += lowlevel_init.o
-COBJS-y += ap.o board.o sys_info.o timer.o
+COBJS-y += ap.o board.o sys_info.o timer.o clock.o
SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS-y))
diff --git a/arch/arm/cpu/tegra-common/clock.c b/arch/arm/cpu/tegra-common/clock.c
new file mode 100644
index 0000000..49a0633
--- /dev/null
+++ b/arch/arm/cpu/tegra-common/clock.c
@@ -0,0 +1,560 @@
+/*
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* Tegra SoC common clock control functions */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/tegra.h>
+#include <asm/arch-tegra/clk_rst.h>
+#include <asm/arch-tegra/timer.h>
+#include <div64.h>
+#include <fdtdec.h>
+
+/*
+ * This is our record of the current clock rate of each clock. We don't
+ * fill all of these in since we are only really interested in clocks which
+ * we use as parents.
+ */
+static unsigned pll_rate[CLOCK_ID_COUNT];
+
+/*
+ * The oscillator frequency is fixed to one of four set values. Based on this
+ * the other clocks are set up appropriately.
+ */
+static unsigned osc_freq[CLOCK_OSC_FREQ_COUNT] = {
+ 13000000,
+ 19200000,
+ 12000000,
+ 26000000,
+};
+
+/* return 1 if a peripheral ID is in range */
+#define clock_type_id_isvalid(id) ((id) >= 0 && \
+ (id) < CLOCK_TYPE_COUNT)
+
+char pllp_valid = 1; /* PLLP is set up correctly */
+
+/* return 1 if a periphc_internal_id is in range */
+#define periphc_internal_id_isvalid(id) ((id) >= 0 && \
+ (id) < PERIPHC_COUNT)
+
+/* number of clock outputs of a PLL */
+static const u8 pll_num_clkouts[] = {
+ 1, /* PLLC */
+ 1, /* PLLM */
+ 4, /* PLLP */
+ 1, /* PLLA */
+ 0, /* PLLU */
+ 0, /* PLLD */
+};
+
+int clock_get_osc_bypass(void)
+{
+ struct clk_rst_ctlr *clkrst =
+ (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+ u32 reg;
+
+ reg = readl(&clkrst->crc_osc_ctrl);
+ return (reg & OSC_XOBP_MASK) >> OSC_XOBP_SHIFT;
+}
+
+/* Returns a pointer to the registers of the given pll */
+static struct clk_pll *get_pll(enum clock_id clkid)
+{
+ struct clk_rst_ctlr *clkrst =
+ (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+
+ assert(clock_id_is_pll(clkid));
+ return &clkrst->crc_pll[clkid];
+}
+
+int clock_ll_read_pll(enum clock_id clkid, u32 *divm, u32 *divn,
+ u32 *divp, u32 *cpcon, u32 *lfcon)
+{
+ struct clk_pll *pll = get_pll(clkid);
+ u32 data;
+
+ assert(clkid != CLOCK_ID_USB);
+
+ /* Safety check, adds to code size but is small */
+ if (!clock_id_is_pll(clkid) || clkid == CLOCK_ID_USB)
+ return -1;
+ data = readl(&pll->pll_base);
+ *divm = (data & PLL_DIVM_MASK) >> PLL_DIVM_SHIFT;
+ *divn = (data & PLL_DIVN_MASK) >> PLL_DIVN_SHIFT;
+ *divp = (data & PLL_DIVP_MASK) >> PLL_DIVP_SHIFT;
+ data = readl(&pll->pll_misc);
+ *cpcon = (data & PLL_CPCON_MASK) >> PLL_CPCON_SHIFT;
+ *lfcon = (data & PLL_LFCON_MASK) >> PLL_LFCON_SHIFT;
+
+ return 0;
+}
+
+unsigned long clock_start_pll(enum clock_id clkid, u32 divm, u32 divn,
+ u32 divp, u32 cpcon, u32 lfcon)
+{
+ struct clk_pll *pll = get_pll(clkid);
+ u32 data;
+
+ /*
+ * We cheat by treating all PLL (except PLLU) in the same fashion.
+ * This works only because:
+ * - same fields are always mapped at same offsets, except DCCON
+ * - DCCON is always 0, doesn't conflict
+ * - M,N, P of PLLP values are ignored for PLLP
+ */
+ data = (cpcon << PLL_CPCON_SHIFT) | (lfcon << PLL_LFCON_SHIFT);
+ writel(data, &pll->pll_misc);
+
+ data = (divm << PLL_DIVM_SHIFT) | (divn << PLL_DIVN_SHIFT) |
+ (0 << PLL_BYPASS_SHIFT) | (1 << PLL_ENABLE_SHIFT);
+
+ if (clkid == CLOCK_ID_USB)
+ data |= divp << PLLU_VCO_FREQ_SHIFT;
+ else
+ data |= divp << PLL_DIVP_SHIFT;
+ writel(data, &pll->pll_base);
+
+ /* calculate the stable time */
+ return timer_get_us() + CLOCK_PLL_STABLE_DELAY_US;
+}
+
+void clock_ll_set_source_divisor(enum periph_id periph_id, unsigned source,
+ unsigned divisor)
+{
+ u32 *reg = get_periph_source_reg(periph_id);
+ u32 value;
+
+ value = readl(reg);
+
+ value &= ~OUT_CLK_SOURCE_MASK;
+ value |= source << OUT_CLK_SOURCE_SHIFT;
+
+ value &= ~OUT_CLK_DIVISOR_MASK;
+ value |= divisor << OUT_CLK_DIVISOR_SHIFT;
+
+ writel(value, reg);
+}
+
+void clock_ll_set_source(enum periph_id periph_id, unsigned source)
+{
+ u32 *reg = get_periph_source_reg(periph_id);
+
+ clrsetbits_le32(reg, OUT_CLK_SOURCE_MASK,
+ source << OUT_CLK_SOURCE_SHIFT);
+}
+
+/**
+ * Given the parent's rate and the required rate for the children, this works
+ * out the peripheral clock divider to use, in 7.1 binary format.
+ *
+ * @param divider_bits number of divider bits (8 or 16)
+ * @param parent_rate clock rate of parent clock in Hz
+ * @param rate required clock rate for this clock
+ * @return divider which should be used
+ */
+static int clk_get_divider(unsigned divider_bits, unsigned long parent_rate,
+ unsigned long rate)
+{
+ u64 divider = parent_rate * 2;
+ unsigned max_divider = 1 << divider_bits;
+
+ divider += rate - 1;
+ do_div(divider, rate);
+
+ if ((s64)divider - 2 < 0)
+ return 0;
+
+ if ((s64)divider - 2 >= max_divider)
+ return -1;
+
+ return divider - 2;
+}
+
+int clock_set_pllout(enum clock_id clkid, enum pll_out_id pllout, unsigned rate)
+{
+ struct clk_pll *pll = get_pll(clkid);
+ int data = 0, div = 0, offset = 0;
+
+ if (!clock_id_is_pll(clkid))
+ return -1;
+
+ if (pllout + 1 > pll_num_clkouts[clkid])
+ return -1;
+
+ div = clk_get_divider(8, pll_rate[clkid], rate);
+
+ if (div < 0)
+ return -1;
+
+ /* out2 and out4 are in the high part of the register */
+ if (pllout == PLL_OUT2 || pllout == PLL_OUT4)
+ offset = 16;
+
+ data = (div << PLL_OUT_RATIO_SHIFT) |
+ PLL_OUT_OVRRIDE | PLL_OUT_CLKEN | PLL_OUT_RSTN;
+ clrsetbits_le32(&pll->pll_out[pllout >> 1],
+ PLL_OUT_RATIO_MASK << offset, data << offset);
+
+ return 0;
+}
+
+/**
+ * Given the parent's rate and the divider in 7.1 format, this works out the
+ * resulting peripheral clock rate.
+ *
+ * @param parent_rate clock rate of parent clock in Hz
+ * @param divider which should be used in 7.1 format
+ * @return effective clock rate of peripheral
+ */
+static unsigned long get_rate_from_divider(unsigned long parent_rate,
+ int divider)
+{
+ u64 rate;
+
+ rate = (u64)parent_rate * 2;
+ do_div(rate, divider + 2);
+ return rate;
+}
+
+unsigned long clock_get_periph_rate(enum periph_id periph_id,
+ enum clock_id parent)
+{
+ u32 *reg = get_periph_source_reg(periph_id);
+
+ return get_rate_from_divider(pll_rate[parent],
+ (readl(reg) & OUT_CLK_DIVISOR_MASK) >> OUT_CLK_DIVISOR_SHIFT);
+}
+
+/**
+ * Find the best available 7.1 format divisor given a parent clock rate and
+ * required child clock rate. This function assumes that a second-stage
+ * divisor is available which can divide by powers of 2 from 1 to 256.
+ *
+ * @param divider_bits number of divider bits (8 or 16)
+ * @param parent_rate clock rate of parent clock in Hz
+ * @param rate required clock rate for this clock
+ * @param extra_div value for the second-stage divisor (not set if this
+ * function returns -1.
+ * @return divider which should be used, or -1 if nothing is valid
+ *
+ */
+static int find_best_divider(unsigned divider_bits, unsigned long parent_rate,
+ unsigned long rate, int *extra_div)
+{
+ int shift;
+ int best_divider = -1;
+ int best_error = rate;
+
+ /* try dividers from 1 to 256 and find closest match */
+ for (shift = 0; shift <= 8 && best_error > 0; shift++) {
+ unsigned divided_parent = parent_rate >> shift;
+ int divider = clk_get_divider(divider_bits, divided_parent,
+ rate);
+ unsigned effective_rate = get_rate_from_divider(divided_parent,
+ divider);
+ int error = rate - effective_rate;
+
+ /* Given a valid divider, look for the lowest error */
+ if (divider != -1 && error < best_error) {
+ best_error = error;
+ *extra_div = 1 << shift;
+ best_divider = divider;
+ }
+ }
+
+ /* return what we found - *extra_div will already be set */
+ return best_divider;
+}
+
+/**
+ * Adjust peripheral PLL to use the given divider and source.
+ *
+ * @param periph_id peripheral to adjust
+ * @param source Source number (0-3 or 0-7)
+ * @param mux_bits Number of mux bits (2 or 4)
+ * @param divider Required divider in 7.1 or 15.1 format
+ * @return 0 if ok, -1 on error (requesting a parent clock which is not valid
+ * for this peripheral)
+ */
+static int adjust_periph_pll(enum periph_id periph_id, int source,
+ int mux_bits, unsigned divider)
+{
+ u32 *reg = get_periph_source_reg(periph_id);
+
+ clrsetbits_le32(reg, OUT_CLK_DIVISOR_MASK,
+ divider << OUT_CLK_DIVISOR_SHIFT);
+ udelay(1);
+
+ /* work out the source clock and set it */
+ if (source < 0)
+ return -1;
+ if (mux_bits == 4) {
+ clrsetbits_le32(reg, OUT_CLK_SOURCE4_MASK,
+ source << OUT_CLK_SOURCE4_SHIFT);
+ } else {
+ clrsetbits_le32(reg, OUT_CLK_SOURCE_MASK,
+ source << OUT_CLK_SOURCE_SHIFT);
+ }
+ udelay(2);
+ return 0;
+}
+
+unsigned clock_adjust_periph_pll_div(enum periph_id periph_id,
+ enum clock_id parent, unsigned rate, int *extra_div)
+{
+ unsigned effective_rate;
+ int mux_bits, divider_bits, source;
+ int divider;
+
+ /* work out the source clock and set it */
+ source = get_periph_clock_source(periph_id, parent, &mux_bits,
+ ÷r_bits);
+
+ if (extra_div)
+ divider = find_best_divider(divider_bits, pll_rate[parent],
+ rate, extra_div);
+ else
+ divider = clk_get_divider(divider_bits, pll_rate[parent],
+ rate);
+ assert(divider >= 0);
+ if (adjust_periph_pll(periph_id, source, mux_bits, divider))
+ return -1U;
+ debug("periph %d, rate=%d, reg=%p = %x\n", periph_id, rate,
+ get_periph_source_reg(periph_id),
+ readl(get_periph_source_reg(periph_id)));
+
+ /* Check what we ended up with. This shouldn't matter though */
+ effective_rate = clock_get_periph_rate(periph_id, parent);
+ if (extra_div)
+ effective_rate /= *extra_div;
+ if (rate != effective_rate)
+ debug("Requested clock rate %u not honored (got %u)\n",
+ rate, effective_rate);
+ return effective_rate;
+}
+
+unsigned clock_start_periph_pll(enum periph_id periph_id,
+ enum clock_id parent, unsigned rate)
+{
+ unsigned effective_rate;
+
+ reset_set_enable(periph_id, 1);
+ clock_enable(periph_id);
+
+ effective_rate = clock_adjust_periph_pll_div(periph_id, parent, rate,
+ NULL);
+
+ reset_set_enable(periph_id, 0);
+ return effective_rate;
+}
+
+void clock_enable(enum periph_id clkid)
+{
+ clock_set_enable(clkid, 1);
+}
+
+void clock_disable(enum periph_id clkid)
+{
+ clock_set_enable(clkid, 0);
+}
+
+void reset_periph(enum periph_id periph_id, int us_delay)
+{
+ /* Put peripheral into reset */
+ reset_set_enable(periph_id, 1);
+ udelay(us_delay);
+
+ /* Remove reset */
+ reset_set_enable(periph_id, 0);
+
+ udelay(us_delay);
+}
+
+void reset_cmplx_set_enable(int cpu, int which, int reset)
+{
+ struct clk_rst_ctlr *clkrst =
+ (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+ u32 mask;
+
+ /* Form the mask, which depends on the cpu chosen (2 or 4) */
+ assert(cpu >= 0 && cpu < MAX_NUM_CPU);
+ mask = which << cpu;
+
+ /* either enable or disable those reset for that CPU */
+ if (reset)
+ writel(mask, &clkrst->crc_cpu_cmplx_set);
+ else
+ writel(mask, &clkrst->crc_cpu_cmplx_clr);
+}
+
+unsigned clock_get_rate(enum clock_id clkid)
+{
+ struct clk_pll *pll;
+ u32 base;
+ u32 divm;
+ u64 parent_rate;
+ u64 rate;
+
+ parent_rate = osc_freq[clock_get_osc_freq()];
+ if (clkid == CLOCK_ID_OSC)
+ return parent_rate;
+
+ pll = get_pll(clkid);
+ base = readl(&pll->pll_base);
+
+ /* Oh for bf_unpack()... */
+ rate = parent_rate * ((base & PLL_DIVN_MASK) >> PLL_DIVN_SHIFT);
+ divm = (base & PLL_DIVM_MASK) >> PLL_DIVM_SHIFT;
+ if (clkid == CLOCK_ID_USB)
+ divm <<= (base & PLLU_VCO_FREQ_MASK) >> PLLU_VCO_FREQ_SHIFT;
+ else
+ divm <<= (base & PLL_DIVP_MASK) >> PLL_DIVP_SHIFT;
+ do_div(rate, divm);
+ return rate;
+}
+
+/**
+ * Set the output frequency you want for each PLL clock.
+ * PLL output frequencies are programmed by setting their N, M and P values.
+ * The governing equations are:
+ * VCO = (Fi / m) * n, Fo = VCO / (2^p)
+ * where Fo is the output frequency from the PLL.
+ * Example: Set the output frequency to 216Mhz(Fo) with 12Mhz OSC(Fi)
+ * 216Mhz = ((12Mhz / m) * n) / (2^p) so n=432,m=12,p=1
+ * Please see Tegra TRM section 5.3 to get the detail for PLL Programming
+ *
+ * @param n PLL feedback divider(DIVN)
+ * @param m PLL input divider(DIVN)
+ * @param p post divider(DIVP)
+ * @param cpcon base PLL charge pump(CPCON)
+ * @return 0 if ok, -1 on error (the requested PLL is incorrect and cannot
+ * be overriden), 1 if PLL is already correct
+ */
+int clock_set_rate(enum clock_id clkid, u32 n, u32 m, u32 p, u32 cpcon)
+{
+ u32 base_reg;
+ u32 misc_reg;
+ struct clk_pll *pll;
+
+ pll = get_pll(clkid);
+
+ base_reg = readl(&pll->pll_base);
+
+ /* Set BYPASS, m, n and p to PLL_BASE */
+ base_reg &= ~PLL_DIVM_MASK;
+ base_reg |= m << PLL_DIVM_SHIFT;
+
+ base_reg &= ~PLL_DIVN_MASK;
+ base_reg |= n << PLL_DIVN_SHIFT;
+
+ base_reg &= ~PLL_DIVP_MASK;
+ base_reg |= p << PLL_DIVP_SHIFT;
+
+ if (clkid == CLOCK_ID_PERIPH) {
+ /*
+ * If the PLL is already set up, check that it is correct
+ * and record this info for clock_verify() to check.
+ */
+ if (base_reg & PLL_BASE_OVRRIDE_MASK) {
+ base_reg |= PLL_ENABLE_MASK;
+ if (base_reg != readl(&pll->pll_base))
+ pllp_valid = 0;
+ return pllp_valid ? 1 : -1;
+ }
+ base_reg |= PLL_BASE_OVRRIDE_MASK;
+ }
+
+ base_reg |= PLL_BYPASS_MASK;
+ writel(base_reg, &pll->pll_base);
+
+ /* Set cpcon to PLL_MISC */
+ misc_reg = readl(&pll->pll_misc);
+ misc_reg &= ~PLL_CPCON_MASK;
+ misc_reg |= cpcon << PLL_CPCON_SHIFT;
+ writel(misc_reg, &pll->pll_misc);
+
+ /* Enable PLL */
+ base_reg |= PLL_ENABLE_MASK;
+ writel(base_reg, &pll->pll_base);
+
+ /* Disable BYPASS */
+ base_reg &= ~PLL_BYPASS_MASK;
+ writel(base_reg, &pll->pll_base);
+
+ return 0;
+}
+
+void clock_ll_start_uart(enum periph_id periph_id)
+{
+ /* Assert UART reset and enable clock */
+ reset_set_enable(periph_id, 1);
+ clock_enable(periph_id);
+ clock_ll_set_source(periph_id, 0); /* UARTx_CLK_SRC = 00, PLLP_OUT0 */
+
+ /* wait for 2us */
+ udelay(2);
+
+ /* De-assert reset to UART */
+ reset_set_enable(periph_id, 0);
+}
+
+#ifdef CONFIG_OF_CONTROL
+int clock_decode_periph_id(const void *blob, int node)
+{
+ enum periph_id id;
+ u32 cell[2];
+ int err;
+
+ err = fdtdec_get_int_array(blob, node, "clocks", cell,
+ ARRAY_SIZE(cell));
+ if (err)
+ return -1;
+ id = clk_id_to_periph_id(cell[1]);
+ assert(clock_periph_id_isvalid(id));
+ return id;
+}
+#endif /* CONFIG_OF_CONTROL */
+
+int clock_verify(void)
+{
+ struct clk_pll *pll = get_pll(CLOCK_ID_PERIPH);
+ u32 reg = readl(&pll->pll_base);
+
+ if (!pllp_valid) {
+ printf("Warning: PLLP %x is not correct\n", reg);
+ return -1;
+ }
+ debug("PLLP %x is correct\n", reg);
+ return 0;
+}
+
+void clock_init(void)
+{
+ pll_rate[CLOCK_ID_MEMORY] = clock_get_rate(CLOCK_ID_MEMORY);
+ pll_rate[CLOCK_ID_PERIPH] = clock_get_rate(CLOCK_ID_PERIPH);
+ pll_rate[CLOCK_ID_CGENERAL] = clock_get_rate(CLOCK_ID_CGENERAL);
+ pll_rate[CLOCK_ID_OSC] = clock_get_rate(CLOCK_ID_OSC);
+ pll_rate[CLOCK_ID_SFROM32KHZ] = 32768;
+ pll_rate[CLOCK_ID_XCPU] = clock_get_rate(CLOCK_ID_XCPU);
+ debug("Osc = %d\n", pll_rate[CLOCK_ID_OSC]);
+ debug("PLLM = %d\n", pll_rate[CLOCK_ID_MEMORY]);
+ debug("PLLP = %d\n", pll_rate[CLOCK_ID_PERIPH]);
+ debug("PLLC = %d\n", pll_rate[CLOCK_ID_CGENERAL]);
+ debug("PLLX = %d\n", pll_rate[CLOCK_ID_XCPU]);
+}
diff --git a/arch/arm/cpu/tegra20-common/clock.c b/arch/arm/cpu/tegra20-common/clock.c
index 12987a6..ec93894 100644
--- a/arch/arm/cpu/tegra20-common/clock.c
+++ b/arch/arm/cpu/tegra20-common/clock.c
@@ -31,24 +31,6 @@
#include <fdtdec.h>
/*
- * This is our record of the current clock rate of each clock. We don't
- * fill all of these in since we are only really interested in clocks which
- * we use as parents.
- */
-static unsigned pll_rate[CLOCK_ID_COUNT];
-
-/*
- * The oscillator frequency is fixed to one of four set values. Based on this
- * the other clocks are set up appropriately.
- */
-static unsigned osc_freq[CLOCK_OSC_FREQ_COUNT] = {
- 13000000,
- 19200000,
- 12000000,
- 26000000,
-};
-
-/*
* Clock types that we can use as a source. The Tegra20 has muxes for the
* peripheral clocks, and in most cases there are four options for the clock
* source. This gives us a clock 'type' and exploits what commonality exists
@@ -76,12 +58,6 @@
CLOCK_TYPE_NONE = -1, /* invalid clock type */
};
-/* return 1 if a peripheral ID is in range */
-#define clock_type_id_isvalid(id) ((id) >= 0 && \
- (id) < CLOCK_TYPE_COUNT)
-
-char pllp_valid = 1; /* PLLP is set up correctly */
-
enum {
CLOCK_MAX_MUX = 4 /* number of source options for each clock */
};
@@ -192,10 +168,6 @@
PERIPHC_NONE = -1,
};
-/* return 1 if a periphc_internal_id is in range */
-#define periphc_internal_id_isvalid(id) ((id) >= 0 && \
- (id) < PERIPHC_COUNT)
-
/*
* Clock type for each peripheral clock source. We put the name in each
* record just so it is easy to match things up
@@ -396,19 +368,9 @@
NONE(CRAM2),
};
-/* number of clock outputs of a PLL */
-static const u8 pll_num_clkouts[] = {
- 1, /* PLLC */
- 1, /* PLLM */
- 4, /* PLLP */
- 1, /* PLLA */
- 0, /* PLLU */
- 0, /* PLLD */
-};
-
/*
* Get the oscillator frequency, from the corresponding hardware configuration
- * field.
+ * field. T20 has 4 frequencies that it supports.
*/
enum clock_osc_freq clock_get_osc_freq(void)
{
@@ -420,110 +382,8 @@
return (reg & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT;
}
-int clock_get_osc_bypass(void)
-{
- struct clk_rst_ctlr *clkrst =
- (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
- u32 reg;
-
- reg = readl(&clkrst->crc_osc_ctrl);
- return (reg & OSC_XOBP_MASK) >> OSC_XOBP_SHIFT;
-}
-
-/* Returns a pointer to the registers of the given pll */
-static struct clk_pll *get_pll(enum clock_id clkid)
-{
- struct clk_rst_ctlr *clkrst =
- (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
-
- assert(clock_id_is_pll(clkid));
- return &clkrst->crc_pll[clkid];
-}
-
-int clock_ll_read_pll(enum clock_id clkid, u32 *divm, u32 *divn,
- u32 *divp, u32 *cpcon, u32 *lfcon)
-{
- struct clk_pll *pll = get_pll(clkid);
- u32 data;
-
- assert(clkid != CLOCK_ID_USB);
-
- /* Safety check, adds to code size but is small */
- if (!clock_id_is_pll(clkid) || clkid == CLOCK_ID_USB)
- return -1;
- data = readl(&pll->pll_base);
- *divm = (data & PLL_DIVM_MASK) >> PLL_DIVM_SHIFT;
- *divn = (data & PLL_DIVN_MASK) >> PLL_DIVN_SHIFT;
- *divp = (data & PLL_DIVP_MASK) >> PLL_DIVP_SHIFT;
- data = readl(&pll->pll_misc);
- *cpcon = (data & PLL_CPCON_MASK) >> PLL_CPCON_SHIFT;
- *lfcon = (data & PLL_LFCON_MASK) >> PLL_LFCON_SHIFT;
-
- return 0;
-}
-
-unsigned long clock_start_pll(enum clock_id clkid, u32 divm, u32 divn,
- u32 divp, u32 cpcon, u32 lfcon)
-{
- struct clk_pll *pll = get_pll(clkid);
- u32 data;
-
- /*
- * We cheat by treating all PLL (except PLLU) in the same fashion.
- * This works only because:
- * - same fields are always mapped at same offsets, except DCCON
- * - DCCON is always 0, doesn't conflict
- * - M,N, P of PLLP values are ignored for PLLP
- */
- data = (cpcon << PLL_CPCON_SHIFT) | (lfcon << PLL_LFCON_SHIFT);
- writel(data, &pll->pll_misc);
-
- data = (divm << PLL_DIVM_SHIFT) | (divn << PLL_DIVN_SHIFT) |
- (0 << PLL_BYPASS_SHIFT) | (1 << PLL_ENABLE_SHIFT);
-
- if (clkid == CLOCK_ID_USB)
- data |= divp << PLLU_VCO_FREQ_SHIFT;
- else
- data |= divp << PLL_DIVP_SHIFT;
- writel(data, &pll->pll_base);
-
- /* calculate the stable time */
- return timer_get_us() + CLOCK_PLL_STABLE_DELAY_US;
-}
-
-/* return 1 if a peripheral ID is in range and valid */
-static int clock_periph_id_isvalid(enum periph_id id)
-{
- if (id < PERIPH_ID_FIRST || id >= PERIPH_ID_COUNT)
- printf("Peripheral id %d out of range\n", id);
- else {
- switch (id) {
- case PERIPH_ID_RESERVED1:
- case PERIPH_ID_RESERVED2:
- case PERIPH_ID_RESERVED30:
- case PERIPH_ID_RESERVED35:
- case PERIPH_ID_RESERVED56:
- case PERIPH_ID_RESERVED74:
- case PERIPH_ID_RESERVED76:
- case PERIPH_ID_RESERVED77:
- case PERIPH_ID_RESERVED78:
- case PERIPH_ID_RESERVED79:
- case PERIPH_ID_RESERVED80:
- case PERIPH_ID_RESERVED81:
- case PERIPH_ID_RESERVED82:
- case PERIPH_ID_RESERVED83:
- case PERIPH_ID_RESERVED91:
- printf("Peripheral id %d is reserved\n", id);
- break;
- default:
- return 1;
- }
- }
- return 0;
-}
-
/* Returns a pointer to the clock source register for a peripheral */
-static u32 *get_periph_source_reg(enum periph_id periph_id)
+u32 *get_periph_source_reg(enum periph_id periph_id)
{
struct clk_rst_ctlr *clkrst =
(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
@@ -535,154 +395,6 @@
return &clkrst->crc_clk_src[internal_id];
}
-void clock_ll_set_source_divisor(enum periph_id periph_id, unsigned source,
- unsigned divisor)
-{
- u32 *reg = get_periph_source_reg(periph_id);
- u32 value;
-
- value = readl(reg);
-
- value &= ~OUT_CLK_SOURCE_MASK;
- value |= source << OUT_CLK_SOURCE_SHIFT;
-
- value &= ~OUT_CLK_DIVISOR_MASK;
- value |= divisor << OUT_CLK_DIVISOR_SHIFT;
-
- writel(value, reg);
-}
-
-void clock_ll_set_source(enum periph_id periph_id, unsigned source)
-{
- u32 *reg = get_periph_source_reg(periph_id);
-
- clrsetbits_le32(reg, OUT_CLK_SOURCE_MASK,
- source << OUT_CLK_SOURCE_SHIFT);
-}
-
-/**
- * Given the parent's rate and the required rate for the children, this works
- * out the peripheral clock divider to use, in 7.1 binary format.
- *
- * @param divider_bits number of divider bits (8 or 16)
- * @param parent_rate clock rate of parent clock in Hz
- * @param rate required clock rate for this clock
- * @return divider which should be used
- */
-static int clk_get_divider(unsigned divider_bits, unsigned long parent_rate,
- unsigned long rate)
-{
- u64 divider = parent_rate * 2;
- unsigned max_divider = 1 << divider_bits;
-
- divider += rate - 1;
- do_div(divider, rate);
-
- if ((s64)divider - 2 < 0)
- return 0;
-
- if ((s64)divider - 2 >= max_divider)
- return -1;
-
- return divider - 2;
-}
-
-/**
- * Given the parent's rate and the divider in 7.1 format, this works out the
- * resulting peripheral clock rate.
- *
- * @param parent_rate clock rate of parent clock in Hz
- * @param divider which should be used in 7.1 format
- * @return effective clock rate of peripheral
- */
-static unsigned long get_rate_from_divider(unsigned long parent_rate,
- int divider)
-{
- u64 rate;
-
- rate = (u64)parent_rate * 2;
- do_div(rate, divider + 2);
- return rate;
-}
-
-unsigned long clock_get_periph_rate(enum periph_id periph_id,
- enum clock_id parent)
-{
- u32 *reg = get_periph_source_reg(periph_id);
-
- return get_rate_from_divider(pll_rate[parent],
- (readl(reg) & OUT_CLK_DIVISOR_MASK) >> OUT_CLK_DIVISOR_SHIFT);
-}
-
-int clock_set_pllout(enum clock_id clkid, enum pll_out_id pllout, unsigned rate)
-{
- struct clk_pll *pll = get_pll(clkid);
- int data = 0, div = 0, offset = 0;
-
- if (!clock_id_is_pll(clkid))
- return -1;
-
- if (pllout + 1 > pll_num_clkouts[clkid])
- return -1;
-
- div = clk_get_divider(8, pll_rate[clkid], rate);
-
- if (div < 0)
- return -1;
-
- /* out2 and out4 are in the high part of the register */
- if (pllout == PLL_OUT2 || pllout == PLL_OUT4)
- offset = 16;
-
- data = (div << PLL_OUT_RATIO_SHIFT) |
- PLL_OUT_OVRRIDE | PLL_OUT_CLKEN | PLL_OUT_RSTN;
- clrsetbits_le32(&pll->pll_out[pllout >> 1],
- PLL_OUT_RATIO_MASK << offset, data << offset);
-
- return 0;
-}
-
-/**
- * Find the best available 7.1 format divisor given a parent clock rate and
- * required child clock rate. This function assumes that a second-stage
- * divisor is available which can divide by powers of 2 from 1 to 256.
- *
- * @param divider_bits number of divider bits (8 or 16)
- * @param parent_rate clock rate of parent clock in Hz
- * @param rate required clock rate for this clock
- * @param extra_div value for the second-stage divisor (not set if this
- * function returns -1.
- * @return divider which should be used, or -1 if nothing is valid
- *
- */
-static int find_best_divider(unsigned divider_bits, unsigned long parent_rate,
- unsigned long rate, int *extra_div)
-{
- int shift;
- int best_divider = -1;
- int best_error = rate;
-
- /* try dividers from 1 to 256 and find closest match */
- for (shift = 0; shift <= 8 && best_error > 0; shift++) {
- unsigned divided_parent = parent_rate >> shift;
- int divider = clk_get_divider(divider_bits, divided_parent,
- rate);
- unsigned effective_rate = get_rate_from_divider(divided_parent,
- divider);
- int error = rate - effective_rate;
-
- /* Given a valid divider, look for the lowest error */
- if (divider != -1 && error < best_error) {
- best_error = error;
- *extra_div = 1 << shift;
- best_divider = divider;
- }
- }
-
- /* return what we found - *extra_div will already be set */
- return best_divider;
-}
-
/**
* Given a peripheral ID and the required source clock, this returns which
* value should be programmed into the source mux for that peripheral.
@@ -695,7 +407,7 @@
* @param divider_bits Set to number of divider bits (8 or 16)
* @return mux value (0-4, or -1 if not found)
*/
-static int get_periph_clock_source(enum periph_id periph_id,
+int get_periph_clock_source(enum periph_id periph_id,
enum clock_id parent, int *mux_bits, int *divider_bits)
{
enum clock_type_id type;
@@ -743,88 +455,6 @@
return -1;
}
-/**
- * Adjust peripheral PLL to use the given divider and source.
- *
- * @param periph_id peripheral to adjust
- * @param source Source number (0-3 or 0-7)
- * @param mux_bits Number of mux bits (2 or 4)
- * @param divider Required divider in 7.1 or 15.1 format
- * @return 0 if ok, -1 on error (requesting a parent clock which is not valid
- * for this peripheral)
- */
-static int adjust_periph_pll(enum periph_id periph_id, int source,
- int mux_bits, unsigned divider)
-{
- u32 *reg = get_periph_source_reg(periph_id);
-
- clrsetbits_le32(reg, OUT_CLK_DIVISOR_MASK,
- divider << OUT_CLK_DIVISOR_SHIFT);
- udelay(1);
-
- /* work out the source clock and set it */
- if (source < 0)
- return -1;
- if (mux_bits == 4) {
- clrsetbits_le32(reg, OUT_CLK_SOURCE4_MASK,
- source << OUT_CLK_SOURCE4_SHIFT);
- } else {
- clrsetbits_le32(reg, OUT_CLK_SOURCE_MASK,
- source << OUT_CLK_SOURCE_SHIFT);
- }
- udelay(2);
- return 0;
-}
-
-unsigned clock_adjust_periph_pll_div(enum periph_id periph_id,
- enum clock_id parent, unsigned rate, int *extra_div)
-{
- unsigned effective_rate;
- int mux_bits, divider_bits, source;
- int divider;
-
- /* work out the source clock and set it */
- source = get_periph_clock_source(periph_id, parent, &mux_bits,
- ÷r_bits);
-
- if (extra_div)
- divider = find_best_divider(divider_bits, pll_rate[parent],
- rate, extra_div);
- else
- divider = clk_get_divider(divider_bits, pll_rate[parent],
- rate);
- assert(divider >= 0);
- if (adjust_periph_pll(periph_id, source, mux_bits, divider))
- return -1U;
- debug("periph %d, rate=%d, reg=%p = %x\n", periph_id, rate,
- get_periph_source_reg(periph_id),
- readl(get_periph_source_reg(periph_id)));
-
- /* Check what we ended up with. This shouldn't matter though */
- effective_rate = clock_get_periph_rate(periph_id, parent);
- if (extra_div)
- effective_rate /= *extra_div;
- if (rate != effective_rate)
- debug("Requested clock rate %u not honored (got %u)\n",
- rate, effective_rate);
- return effective_rate;
-}
-
-unsigned clock_start_periph_pll(enum periph_id periph_id,
- enum clock_id parent, unsigned rate)
-{
- unsigned effective_rate;
-
- reset_set_enable(periph_id, 1);
- clock_enable(periph_id);
-
- effective_rate = clock_adjust_periph_pll_div(periph_id, parent, rate,
- NULL);
-
- reset_set_enable(periph_id, 0);
- return effective_rate;
-}
-
void clock_set_enable(enum periph_id periph_id, int enable)
{
struct clk_rst_ctlr *clkrst =
@@ -842,16 +472,6 @@
writel(reg, clk);
}
-void clock_enable(enum periph_id clkid)
-{
- clock_set_enable(clkid, 1);
-}
-
-void clock_disable(enum periph_id clkid)
-{
- clock_set_enable(clkid, 0);
-}
-
void reset_set_enable(enum periph_id periph_id, int enable)
{
struct clk_rst_ctlr *clkrst =
@@ -869,146 +489,6 @@
writel(reg, reset);
}
-void reset_periph(enum periph_id periph_id, int us_delay)
-{
- /* Put peripheral into reset */
- reset_set_enable(periph_id, 1);
- udelay(us_delay);
-
- /* Remove reset */
- reset_set_enable(periph_id, 0);
-
- udelay(us_delay);
-}
-
-void reset_cmplx_set_enable(int cpu, int which, int reset)
-{
- struct clk_rst_ctlr *clkrst =
- (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
- u32 mask;
-
- /* Form the mask, which depends on the cpu chosen. Tegra20 has 2 */
- assert(cpu >= 0 && cpu < 2);
- mask = which << cpu;
-
- /* either enable or disable those reset for that CPU */
- if (reset)
- writel(mask, &clkrst->crc_cpu_cmplx_set);
- else
- writel(mask, &clkrst->crc_cpu_cmplx_clr);
-}
-
-unsigned clock_get_rate(enum clock_id clkid)
-{
- struct clk_pll *pll;
- u32 base;
- u32 divm;
- u64 parent_rate;
- u64 rate;
-
- parent_rate = osc_freq[clock_get_osc_freq()];
- if (clkid == CLOCK_ID_OSC)
- return parent_rate;
-
- pll = get_pll(clkid);
- base = readl(&pll->pll_base);
-
- /* Oh for bf_unpack()... */
- rate = parent_rate * ((base & PLL_DIVN_MASK) >> PLL_DIVN_SHIFT);
- divm = (base & PLL_DIVM_MASK) >> PLL_DIVM_SHIFT;
- if (clkid == CLOCK_ID_USB)
- divm <<= (base & PLLU_VCO_FREQ_MASK) >> PLLU_VCO_FREQ_SHIFT;
- else
- divm <<= (base & PLL_DIVP_MASK) >> PLL_DIVP_SHIFT;
- do_div(rate, divm);
- return rate;
-}
-
-/**
- * Set the output frequency you want for each PLL clock.
- * PLL output frequencies are programmed by setting their N, M and P values.
- * The governing equations are:
- * VCO = (Fi / m) * n, Fo = VCO / (2^p)
- * where Fo is the output frequency from the PLL.
- * Example: Set the output frequency to 216Mhz(Fo) with 12Mhz OSC(Fi)
- * 216Mhz = ((12Mhz / m) * n) / (2^p) so n=432,m=12,p=1
- * Please see Tegra TRM section 5.3 to get the detail for PLL Programming
- *
- * @param n PLL feedback divider(DIVN)
- * @param m PLL input divider(DIVN)
- * @param p post divider(DIVP)
- * @param cpcon base PLL charge pump(CPCON)
- * @return 0 if ok, -1 on error (the requested PLL is incorrect and cannot
- * be overriden), 1 if PLL is already correct
- */
-static int clock_set_rate(enum clock_id clkid, u32 n, u32 m, u32 p, u32 cpcon)
-{
- u32 base_reg;
- u32 misc_reg;
- struct clk_pll *pll;
-
- pll = get_pll(clkid);
-
- base_reg = readl(&pll->pll_base);
-
- /* Set BYPASS, m, n and p to PLL_BASE */
- base_reg &= ~PLL_DIVM_MASK;
- base_reg |= m << PLL_DIVM_SHIFT;
-
- base_reg &= ~PLL_DIVN_MASK;
- base_reg |= n << PLL_DIVN_SHIFT;
-
- base_reg &= ~PLL_DIVP_MASK;
- base_reg |= p << PLL_DIVP_SHIFT;
-
- if (clkid == CLOCK_ID_PERIPH) {
- /*
- * If the PLL is already set up, check that it is correct
- * and record this info for clock_verify() to check.
- */
- if (base_reg & PLL_BASE_OVRRIDE_MASK) {
- base_reg |= PLL_ENABLE_MASK;
- if (base_reg != readl(&pll->pll_base))
- pllp_valid = 0;
- return pllp_valid ? 1 : -1;
- }
- base_reg |= PLL_BASE_OVRRIDE_MASK;
- }
-
- base_reg |= PLL_BYPASS_MASK;
- writel(base_reg, &pll->pll_base);
-
- /* Set cpcon to PLL_MISC */
- misc_reg = readl(&pll->pll_misc);
- misc_reg &= ~PLL_CPCON_MASK;
- misc_reg |= cpcon << PLL_CPCON_SHIFT;
- writel(misc_reg, &pll->pll_misc);
-
- /* Enable PLL */
- base_reg |= PLL_ENABLE_MASK;
- writel(base_reg, &pll->pll_base);
-
- /* Disable BYPASS */
- base_reg &= ~PLL_BYPASS_MASK;
- writel(base_reg, &pll->pll_base);
-
- return 0;
-}
-
-void clock_ll_start_uart(enum periph_id periph_id)
-{
- /* Assert UART reset and enable clock */
- reset_set_enable(periph_id, 1);
- clock_enable(periph_id);
- clock_ll_set_source(periph_id, 0); /* UARTx_CLK_SRC = 00, PLLP_OUT0 */
-
- /* wait for 2us */
- udelay(2);
-
- /* De-assert reset to UART */
- reset_set_enable(periph_id, 0);
-}
-
#ifdef CONFIG_OF_CONTROL
/*
* Convert a device tree clock ID to our peripheral ID. They are mostly
@@ -1018,67 +498,34 @@
* @param clk_id Clock ID according to tegra20 device tree binding
* @return peripheral ID, or PERIPH_ID_NONE if the clock ID is invalid
*/
-static enum periph_id clk_id_to_periph_id(int clk_id)
+enum periph_id clk_id_to_periph_id(int clk_id)
{
- if (clk_id > 95)
+ if (clk_id > PERIPH_ID_COUNT)
return PERIPH_ID_NONE;
switch (clk_id) {
- case 1:
- case 2:
- case 7:
- case 10:
- case 20:
- case 30:
- case 35:
- case 49:
- case 56:
- case 74:
- case 76:
- case 77:
- case 78:
- case 79:
- case 80:
- case 81:
- case 82:
- case 83:
- case 91:
- case 95:
+ case PERIPH_ID_RESERVED1:
+ case PERIPH_ID_RESERVED2:
+ case PERIPH_ID_RESERVED30:
+ case PERIPH_ID_RESERVED35:
+ case PERIPH_ID_RESERVED56:
+ case PERIPH_ID_RESERVED74:
+ case PERIPH_ID_RESERVED76:
+ case PERIPH_ID_RESERVED77:
+ case PERIPH_ID_RESERVED78:
+ case PERIPH_ID_RESERVED79:
+ case PERIPH_ID_RESERVED80:
+ case PERIPH_ID_RESERVED81:
+ case PERIPH_ID_RESERVED82:
+ case PERIPH_ID_RESERVED83:
+ case PERIPH_ID_RESERVED91:
return PERIPH_ID_NONE;
default:
return clk_id;
}
}
-
-int clock_decode_periph_id(const void *blob, int node)
-{
- enum periph_id id;
- u32 cell[2];
- int err;
-
- err = fdtdec_get_int_array(blob, node, "clocks", cell,
- ARRAY_SIZE(cell));
- if (err)
- return -1;
- id = clk_id_to_periph_id(cell[1]);
- assert(clock_periph_id_isvalid(id));
- return id;
-}
#endif /* CONFIG_OF_CONTROL */
-int clock_verify(void)
-{
- struct clk_pll *pll = get_pll(CLOCK_ID_PERIPH);
- u32 reg = readl(&pll->pll_base);
-
- if (!pllp_valid) {
- printf("Warning: PLLP %x is not correct\n", reg);
- return -1;
- }
- debug("PLLX %x is correct\n", reg);
- return 0;
-}
-
void clock_early_init(void)
{
/*
@@ -1112,15 +559,3 @@
break;
}
}
-
-void clock_init(void)
-{
- pll_rate[CLOCK_ID_MEMORY] = clock_get_rate(CLOCK_ID_MEMORY);
- pll_rate[CLOCK_ID_PERIPH] = clock_get_rate(CLOCK_ID_PERIPH);
- pll_rate[CLOCK_ID_CGENERAL] = clock_get_rate(CLOCK_ID_CGENERAL);
- pll_rate[CLOCK_ID_OSC] = clock_get_rate(CLOCK_ID_OSC);
- pll_rate[CLOCK_ID_SFROM32KHZ] = 32768;
- debug("Osc = %d\n", pll_rate[CLOCK_ID_OSC]);
- debug("PLLM = %d\n", pll_rate[CLOCK_ID_MEMORY]);
- debug("PLLP = %d\n", pll_rate[CLOCK_ID_PERIPH]);
-}
diff --git a/arch/arm/cpu/tegra30-common/clock.c b/arch/arm/cpu/tegra30-common/clock.c
index c67a2e1..ee3c8b1 100644
--- a/arch/arm/cpu/tegra30-common/clock.c
+++ b/arch/arm/cpu/tegra30-common/clock.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved.
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
@@ -26,25 +26,7 @@
#include <fdtdec.h>
/*
- * This is our record of the current clock rate of each clock. We don't
- * fill all of these in since we are only really interested in clocks which
- * we use as parents.
- */
-static unsigned pll_rate[CLOCK_ID_COUNT];
-
-/*
- * The oscillator frequency is fixed to one of four set values. Based on this
- * the other clocks are set up appropriately.
- */
-static unsigned osc_freq[CLOCK_OSC_FREQ_COUNT] = {
- 13000000,
- 19200000,
- 12000000,
- 26000000,
-};
-
-/*
- * Clock types that we can use as a source. The Tegra3 has muxes for the
+ * Clock types that we can use as a source. The Tegra30 has muxes for the
* peripheral clocks, and in most cases there are four options for the clock
* source. This gives us a clock 'type' and exploits what commonality exists
* in the device.
@@ -71,21 +53,15 @@
CLOCK_TYPE_PCST,
CLOCK_TYPE_COUNT,
- CLOCK_TYPE_NONE = -1, /* invalid clock type */
-};
-
-/* return 1 if a peripheral ID is in range */
-#define clock_type_id_isvalid(id) ((id) >= 0 && \
- (id) < CLOCK_TYPE_COUNT)
-
-char pllp_valid = 1; /* PLLP is set up correctly */
-
-enum {
- CLOCK_MAX_MUX = 8 /* number of source options for each clock */
+ CLOCK_TYPE_NONE = -1, /* invalid clock type */
};
enum {
- MASK_BITS_31_30 = 2, /* num of bits used to specify clock source */
+ CLOCK_MAX_MUX = 8 /* number of source options for each clock */
+};
+
+enum {
+ MASK_BITS_31_30 = 2, /* num of bits used to specify clock source */
MASK_BITS_31_29,
MASK_BITS_29_28,
};
@@ -100,45 +76,41 @@
*/
#define CLK(x) CLOCK_ID_ ## x
static enum clock_id clock_source[CLOCK_TYPE_COUNT][CLOCK_MAX_MUX+1] = {
- { CLK(AUDIO), CLK(XCPU), CLK(PERIPH), CLK(OSC),
- CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
+ { CLK(AUDIO), CLK(XCPU), CLK(PERIPH), CLK(OSC),
+ CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
MASK_BITS_31_30},
- { CLK(MEMORY), CLK(CGENERAL), CLK(PERIPH), CLK(AUDIO),
- CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
+ { CLK(MEMORY), CLK(CGENERAL), CLK(PERIPH), CLK(AUDIO),
+ CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
MASK_BITS_31_30},
- { CLK(MEMORY), CLK(CGENERAL), CLK(PERIPH), CLK(OSC),
- CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
+ { CLK(MEMORY), CLK(CGENERAL), CLK(PERIPH), CLK(OSC),
+ CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
MASK_BITS_31_30},
- { CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(NONE),
- CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
+ { CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(NONE),
+ CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
MASK_BITS_31_30},
- { CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(OSC),
- CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
+ { CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(OSC),
+ CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
MASK_BITS_31_30},
- { CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(OSC),
- CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
+ { CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(OSC),
+ CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
MASK_BITS_31_30},
- { CLK(PERIPH), CLK(DISPLAY), CLK(CGENERAL), CLK(OSC),
- CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
+ { CLK(PERIPH), CLK(DISPLAY), CLK(CGENERAL), CLK(OSC),
+ CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
MASK_BITS_31_30},
- { CLK(AUDIO), CLK(CGENERAL), CLK(PERIPH), CLK(OSC),
- CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
+ { CLK(AUDIO), CLK(CGENERAL), CLK(PERIPH), CLK(OSC),
+ CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
MASK_BITS_31_30},
- { CLK(AUDIO), CLK(SFROM32KHZ), CLK(PERIPH), CLK(OSC),
- CLK(EPCI), CLK(NONE), CLK(NONE), CLK(NONE),
+ { CLK(AUDIO), CLK(SFROM32KHZ), CLK(PERIPH), CLK(OSC),
+ CLK(EPCI), CLK(NONE), CLK(NONE), CLK(NONE),
MASK_BITS_31_29},
- { CLK(PERIPH), CLK(MEMORY), CLK(DISPLAY), CLK(AUDIO),
- CLK(CGENERAL), CLK(DISPLAY2), CLK(OSC), CLK(NONE),
+ { CLK(PERIPH), CLK(MEMORY), CLK(DISPLAY), CLK(AUDIO),
+ CLK(CGENERAL), CLK(DISPLAY2), CLK(OSC), CLK(NONE),
MASK_BITS_31_29},
- { CLK(PERIPH), CLK(CGENERAL), CLK(SFROM32KHZ), CLK(OSC),
- CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
+ { CLK(PERIPH), CLK(CGENERAL), CLK(SFROM32KHZ), CLK(OSC),
+ CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
MASK_BITS_29_28}
};
-/* return 1 if a periphc_internal_id is in range */
-#define periphc_internal_id_isvalid(id) ((id) >= 0 && \
- (id) < PERIPHC_COUNT)
-
/*
* Clock type for each peripheral clock source. We put the name in each
* record just so it is easy to match things up
@@ -147,30 +119,30 @@
static enum clock_type_id clock_periph_type[PERIPHC_COUNT] = {
/* 0x00 */
TYPE(PERIPHC_I2S1, CLOCK_TYPE_AXPT),
- TYPE(PERIPHC_I2S2, CLOCK_TYPE_AXPT),
- TYPE(PERIPHC_SPDIF_OUT, CLOCK_TYPE_AXPT),
- TYPE(PERIPHC_SPDIF_IN, CLOCK_TYPE_PCM),
- TYPE(PERIPHC_PWM, CLOCK_TYPE_PCST), /* only PWM uses b29:28 */
- TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
- TYPE(PERIPHC_SBC2, CLOCK_TYPE_PCMT),
- TYPE(PERIPHC_SBC3, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_I2S2, CLOCK_TYPE_AXPT),
+ TYPE(PERIPHC_SPDIF_OUT, CLOCK_TYPE_AXPT),
+ TYPE(PERIPHC_SPDIF_IN, CLOCK_TYPE_PCM),
+ TYPE(PERIPHC_PWM, CLOCK_TYPE_PCST), /* only PWM uses b29:28 */
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_SBC2, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_SBC3, CLOCK_TYPE_PCMT),
/* 0x08 */
- TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
- TYPE(PERIPHC_I2C1, CLOCK_TYPE_PCMT16),
- TYPE(PERIPHC_DVC_I2C, CLOCK_TYPE_PCMT16),
- TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
- TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
- TYPE(PERIPHC_SBC1, CLOCK_TYPE_PCMT),
- TYPE(PERIPHC_DISP1, CLOCK_TYPE_PMDACD2T),
- TYPE(PERIPHC_DISP2, CLOCK_TYPE_PMDACD2T),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_I2C1, CLOCK_TYPE_PCMT16),
+ TYPE(PERIPHC_DVC_I2C, CLOCK_TYPE_PCMT16),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_SBC1, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_DISP1, CLOCK_TYPE_PMDACD2T),
+ TYPE(PERIPHC_DISP2, CLOCK_TYPE_PMDACD2T),
/* 0x10 */
- TYPE(PERIPHC_CVE, CLOCK_TYPE_PDCT),
- TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_CVE, CLOCK_TYPE_PDCT),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
TYPE(PERIPHC_VI, CLOCK_TYPE_MCPA),
- TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
- TYPE(PERIPHC_SDMMC1, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_SDMMC1, CLOCK_TYPE_PCMT),
TYPE(PERIPHC_SDMMC2, CLOCK_TYPE_PCMT),
TYPE(PERIPHC_G3D, CLOCK_TYPE_MCPA),
TYPE(PERIPHC_G2D, CLOCK_TYPE_MCPA),
@@ -178,81 +150,81 @@
/* 0x18 */
TYPE(PERIPHC_NDFLASH, CLOCK_TYPE_PCMT),
TYPE(PERIPHC_SDMMC4, CLOCK_TYPE_PCMT),
- TYPE(PERIPHC_VFIR, CLOCK_TYPE_PCMT),
- TYPE(PERIPHC_EPP, CLOCK_TYPE_MCPA),
- TYPE(PERIPHC_MPE, CLOCK_TYPE_MCPA),
- TYPE(PERIPHC_MIPI, CLOCK_TYPE_PCMT), /* MIPI base-band HSI */
- TYPE(PERIPHC_UART1, CLOCK_TYPE_PCMT),
- TYPE(PERIPHC_UART2, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_VFIR, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_EPP, CLOCK_TYPE_MCPA),
+ TYPE(PERIPHC_MPE, CLOCK_TYPE_MCPA),
+ TYPE(PERIPHC_MIPI, CLOCK_TYPE_PCMT), /* MIPI base-band HSI */
+ TYPE(PERIPHC_UART1, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_UART2, CLOCK_TYPE_PCMT),
/* 0x20 */
- TYPE(PERIPHC_HOST1X, CLOCK_TYPE_MCPA),
- TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
- TYPE(PERIPHC_TVO, CLOCK_TYPE_PDCT),
- TYPE(PERIPHC_HDMI, CLOCK_TYPE_PMDACD2T),
- TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
- TYPE(PERIPHC_TVDAC, CLOCK_TYPE_PDCT),
- TYPE(PERIPHC_I2C2, CLOCK_TYPE_PCMT16),
+ TYPE(PERIPHC_HOST1X, CLOCK_TYPE_MCPA),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_TVO, CLOCK_TYPE_PDCT),
+ TYPE(PERIPHC_HDMI, CLOCK_TYPE_PMDACD2T),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_TVDAC, CLOCK_TYPE_PDCT),
+ TYPE(PERIPHC_I2C2, CLOCK_TYPE_PCMT16),
TYPE(PERIPHC_EMC, CLOCK_TYPE_MCPT),
/* 0x28 */
TYPE(PERIPHC_UART3, CLOCK_TYPE_PCMT),
TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
TYPE(PERIPHC_VI, CLOCK_TYPE_MCPA),
- TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
- TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
- TYPE(PERIPHC_SBC4, CLOCK_TYPE_PCMT),
- TYPE(PERIPHC_I2C3, CLOCK_TYPE_PCMT16),
- TYPE(PERIPHC_SDMMC3, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_SBC4, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_I2C3, CLOCK_TYPE_PCMT16),
+ TYPE(PERIPHC_SDMMC3, CLOCK_TYPE_PCMT),
/* 0x30 */
TYPE(PERIPHC_UART4, CLOCK_TYPE_PCMT),
TYPE(PERIPHC_UART5, CLOCK_TYPE_PCMT),
TYPE(PERIPHC_VDE, CLOCK_TYPE_PCMT),
- TYPE(PERIPHC_OWR, CLOCK_TYPE_PCMT),
- TYPE(PERIPHC_NOR, CLOCK_TYPE_PCMT),
- TYPE(PERIPHC_CSITE, CLOCK_TYPE_PCMT),
- TYPE(PERIPHC_I2S0, CLOCK_TYPE_AXPT),
- TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_OWR, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_NOR, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_CSITE, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_I2S0, CLOCK_TYPE_AXPT),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
- /* 0x38h */ /* Jumps to reg offset 0x3B0h - new for T30 */
- TYPE(PERIPHC_G3D2, CLOCK_TYPE_MCPA),
- TYPE(PERIPHC_MSELECT, CLOCK_TYPE_PCMT),
- TYPE(PERIPHC_TSENSOR, CLOCK_TYPE_PCST), /* s/b PCTS */
- TYPE(PERIPHC_I2S3, CLOCK_TYPE_AXPT),
- TYPE(PERIPHC_I2S4, CLOCK_TYPE_AXPT),
- TYPE(PERIPHC_I2C4, CLOCK_TYPE_PCMT16),
- TYPE(PERIPHC_SBC5, CLOCK_TYPE_PCMT),
- TYPE(PERIPHC_SBC6, CLOCK_TYPE_PCMT),
+ /* 0x38h */ /* Jumps to reg offset 0x3B0h - new for T30 */
+ TYPE(PERIPHC_G3D2, CLOCK_TYPE_MCPA),
+ TYPE(PERIPHC_MSELECT, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_TSENSOR, CLOCK_TYPE_PCST), /* s/b PCTS */
+ TYPE(PERIPHC_I2S3, CLOCK_TYPE_AXPT),
+ TYPE(PERIPHC_I2S4, CLOCK_TYPE_AXPT),
+ TYPE(PERIPHC_I2C4, CLOCK_TYPE_PCMT16),
+ TYPE(PERIPHC_SBC5, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_SBC6, CLOCK_TYPE_PCMT),
/* 0x40 */
- TYPE(PERIPHC_AUDIO, CLOCK_TYPE_ACPT),
- TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
- TYPE(PERIPHC_DAM0, CLOCK_TYPE_ACPT),
- TYPE(PERIPHC_DAM1, CLOCK_TYPE_ACPT),
- TYPE(PERIPHC_DAM2, CLOCK_TYPE_ACPT),
+ TYPE(PERIPHC_AUDIO, CLOCK_TYPE_ACPT),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_DAM0, CLOCK_TYPE_ACPT),
+ TYPE(PERIPHC_DAM1, CLOCK_TYPE_ACPT),
+ TYPE(PERIPHC_DAM2, CLOCK_TYPE_ACPT),
TYPE(PERIPHC_HDA2CODEC2X, CLOCK_TYPE_PCMT),
- TYPE(PERIPHC_ACTMON, CLOCK_TYPE_PCST), /* MASK 31:30 */
+ TYPE(PERIPHC_ACTMON, CLOCK_TYPE_PCST), /* MASK 31:30 */
TYPE(PERIPHC_EXTPERIPH1, CLOCK_TYPE_ASPTE),
/* 0x48 */
TYPE(PERIPHC_EXTPERIPH2, CLOCK_TYPE_ASPTE),
TYPE(PERIPHC_EXTPERIPH3, CLOCK_TYPE_ASPTE),
- TYPE(PERIPHC_NANDSPEED, CLOCK_TYPE_PCMT),
- TYPE(PERIPHC_I2CSLOW, CLOCK_TYPE_PCST), /* MASK 31:30 */
- TYPE(PERIPHC_SYS, CLOCK_TYPE_NONE),
- TYPE(PERIPHC_SPEEDO, CLOCK_TYPE_PCMT),
- TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
- TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_NANDSPEED, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_I2CSLOW, CLOCK_TYPE_PCST), /* MASK 31:30 */
+ TYPE(PERIPHC_SYS, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_SPEEDO, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
/* 0x50 */
- TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
- TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
- TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
- TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
- TYPE(PERIPHC_SATAOOB, CLOCK_TYPE_PCMT), /* offset 0x420h */
- TYPE(PERIPHC_SATA, CLOCK_TYPE_PCMT),
- TYPE(PERIPHC_HDA, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_SATAOOB, CLOCK_TYPE_PCMT), /* offset 0x420h */
+ TYPE(PERIPHC_SATA, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_HDA, CLOCK_TYPE_PCMT),
};
/*
@@ -274,12 +246,12 @@
NONE(RESERVED4),
NONE(TMR),
PERIPHC_UART1,
- PERIPHC_UART2, /* and vfir 0x68 */
+ PERIPHC_UART2, /* and vfir 0x68 */
/* 8 */
NONE(GPIO),
PERIPHC_SDMMC2,
- NONE(SPDIF), /* 0x08 and 0x0c, unclear which to use */
+ NONE(SPDIF), /* 0x08 and 0x0c, unclear which to use */
PERIPHC_I2S1,
PERIPHC_I2C1,
PERIPHC_NDFLASH,
@@ -318,7 +290,7 @@
/* 40 */
NONE(KFUSE),
- NONE(SBC1), /* SBC1, 0x34, is this SPI1? */
+ NONE(SBC1), /* SBC1, 0x34, is this SPI1? */
PERIPHC_NOR,
NONE(RESERVED43),
PERIPHC_SBC2,
@@ -328,7 +300,7 @@
/* 48 */
NONE(DSI),
- PERIPHC_TVO, /* also CVE 0x40 */
+ PERIPHC_TVO, /* also CVE 0x40 */
PERIPHC_MIPI,
PERIPHC_HDMI,
NONE(CSI),
@@ -449,7 +421,8 @@
/*
* Get the oscillator frequency, from the corresponding hardware configuration
- * field.
+ * field. Note that T30 supports 3 new higher freqs, but we map back
+ * to the old T20 freqs. Support for the higher oscillators is TBD.
*/
enum clock_osc_freq clock_get_osc_freq(void)
{
@@ -458,84 +431,19 @@
u32 reg;
reg = readl(&clkrst->crc_osc_ctrl);
- return (reg & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT;
-}
+ reg = (reg & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT;
-int clock_get_osc_bypass(void)
-{
- struct clk_rst_ctlr *clkrst =
- (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
- u32 reg;
+ if (reg & 1) /* one of the newer freqs */
+ printf("Warning: OSC_FREQ is unsupported! (%d)\n", reg);
- reg = readl(&clkrst->crc_osc_ctrl);
- return (reg & OSC_XOBP_MASK) >> OSC_XOBP_SHIFT;
-}
-
-/* Returns a pointer to the registers of the given pll */
-static struct clk_pll *get_pll(enum clock_id clkid)
-{
- struct clk_rst_ctlr *clkrst =
- (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
-
- assert(clock_id_is_pll(clkid));
- return &clkrst->crc_pll[clkid];
-}
-
-int clock_ll_read_pll(enum clock_id clkid, u32 *divm, u32 *divn,
- u32 *divp, u32 *cpcon, u32 *lfcon)
-{
- struct clk_pll *pll = get_pll(clkid);
- u32 data;
-
- assert(clkid != CLOCK_ID_USB);
-
- /* Safety check, adds to code size but is small */
- if (!clock_id_is_pll(clkid) || clkid == CLOCK_ID_USB)
- return -1;
- data = readl(&pll->pll_base);
- *divm = (data & PLL_DIVM_MASK) >> PLL_DIVM_SHIFT;
- *divn = (data & PLL_DIVN_MASK) >> PLL_DIVN_SHIFT;
- *divp = (data & PLL_DIVP_MASK) >> PLL_DIVP_SHIFT;
- data = readl(&pll->pll_misc);
- *cpcon = (data & PLL_CPCON_MASK) >> PLL_CPCON_SHIFT;
- *lfcon = (data & PLL_LFCON_MASK) >> PLL_LFCON_SHIFT;
- return 0;
-}
-
-unsigned long clock_start_pll(enum clock_id clkid, u32 divm, u32 divn,
- u32 divp, u32 cpcon, u32 lfcon)
-{
- struct clk_pll *pll = get_pll(clkid);
- u32 data;
-
- /*
- * We cheat by treating all PLL (except PLLU) in the same fashion.
- * This works only because:
- * - same fields are always mapped at same offsets, except DCCON
- * - DCCON is always 0, doesn't conflict
- * - M,N, P of PLLP values are ignored for PLLP
- */
- data = (cpcon << PLL_CPCON_SHIFT) | (lfcon << PLL_LFCON_SHIFT);
- writel(data, &pll->pll_misc);
-
- data = (divm << PLL_DIVM_SHIFT) | (divn << PLL_DIVN_SHIFT) |
- (0 << PLL_BYPASS_SHIFT) | (1 << PLL_ENABLE_SHIFT);
-
- if (clkid == CLOCK_ID_USB)
- data |= divp << PLLU_VCO_FREQ_SHIFT;
- else
- data |= divp << PLL_DIVP_SHIFT;
- writel(data, &pll->pll_base);
-
- /* calculate the stable time */
- return timer_get_us() + CLOCK_PLL_STABLE_DELAY_US;
+ return reg >> 2; /* Map to most common (T20) freqs */
}
/* Returns a pointer to the clock source register for a peripheral */
-static u32 *get_periph_source_reg(enum periph_id periph_id)
+u32 *get_periph_source_reg(enum periph_id periph_id)
{
struct clk_rst_ctlr *clkrst =
- (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+ (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
enum periphc_internal_id internal_id;
/* Coresight is a special case */
@@ -552,126 +460,6 @@
return &clkrst->crc_clk_src[internal_id];
}
-void clock_ll_set_source_divisor(enum periph_id periph_id, unsigned source,
- unsigned divisor)
-{
- u32 *reg = get_periph_source_reg(periph_id);
- u32 value;
-
- value = readl(reg);
-
- value &= ~OUT_CLK_SOURCE_MASK;
- value |= source << OUT_CLK_SOURCE_SHIFT;
-
- value &= ~OUT_CLK_DIVISOR_MASK;
- value |= divisor << OUT_CLK_DIVISOR_SHIFT;
-
- writel(value, reg);
-}
-
-void clock_ll_set_source(enum periph_id periph_id, unsigned source)
-{
- u32 *reg = get_periph_source_reg(periph_id);
-
- clrsetbits_le32(reg, OUT_CLK_SOURCE_MASK,
- source << OUT_CLK_SOURCE_SHIFT);
-}
-
-/**
- * Given the parent's rate and the required rate for the children, this works
- * out the peripheral clock divider to use, in 7.1 binary format.
- *
- * @param divider_bits number of divider bits (8 or 16)
- * @param parent_rate clock rate of parent clock in Hz
- * @param rate required clock rate for this clock
- * @return divider which should be used
- */
-static int clk_get_divider(unsigned divider_bits, unsigned long parent_rate,
- unsigned long rate)
-{
- u64 divider = parent_rate * 2;
- unsigned max_divider = 1 << divider_bits;
-
- divider += rate - 1;
- do_div(divider, rate);
-
- if ((s64)divider - 2 < 0)
- return 0;
-
- if ((s64)divider - 2 >= max_divider)
- return -1;
-
- return divider - 2;
-}
-
-/**
- * Given the parent's rate and the divider in 7.1 format, this works out the
- * resulting peripheral clock rate.
- *
- * @param parent_rate clock rate of parent clock in Hz
- * @param divider which should be used in 7.1 format
- * @return effective clock rate of peripheral
- */
-static unsigned long get_rate_from_divider(unsigned long parent_rate,
- int divider)
-{
- u64 rate;
-
- rate = (u64)parent_rate * 2;
- do_div(rate, divider + 2);
- return rate;
-}
-
-unsigned long clock_get_periph_rate(enum periph_id periph_id,
- enum clock_id parent)
-{
- u32 *reg = get_periph_source_reg(periph_id);
-
- return get_rate_from_divider(pll_rate[parent],
- (readl(reg) & OUT_CLK_DIVISOR_MASK) >> OUT_CLK_DIVISOR_SHIFT);
-}
-
-/**
- * Find the best available 7.1 format divisor given a parent clock rate and
- * required child clock rate. This function assumes that a second-stage
- * divisor is available which can divide by powers of 2 from 1 to 256.
- *
- * @param divider_bits number of divider bits (8 or 16)
- * @param parent_rate clock rate of parent clock in Hz
- * @param rate required clock rate for this clock
- * @param extra_div value for the second-stage divisor (not set if this
- * function returns -1.
- * @return divider which should be used, or -1 if nothing is valid
- *
- */
-static int find_best_divider(unsigned divider_bits, unsigned long parent_rate,
- unsigned long rate, int *extra_div)
-{
- int shift;
- int best_divider = -1;
- int best_error = rate;
-
- /* try dividers from 1 to 256 and find closest match */
- for (shift = 0; shift <= 8 && best_error > 0; shift++) {
- unsigned divided_parent = parent_rate >> shift;
- int divider = clk_get_divider(divider_bits, divided_parent,
- rate);
- unsigned effective_rate = get_rate_from_divider(divided_parent,
- divider);
- int error = rate - effective_rate;
-
- /* Given a valid divider, look for the lowest error */
- if (divider != -1 && error < best_error) {
- best_error = error;
- *extra_div = 1 << shift;
- best_divider = divider;
- }
- }
-
- /* return what we found - *extra_div will already be set */
- return best_divider;
-}
-
/**
* Given a peripheral ID and the required source clock, this returns which
* value should be programmed into the source mux for that peripheral.
@@ -681,11 +469,11 @@
* @param periph_id peripheral to start
* @param source PLL id of required parent clock
* @param mux_bits Set to number of bits in mux register: 2 or 4
- * @param divider_bits Set to number of divider bits (8 or 16)
+ * @param divider_bits Set to number of divider bits (8 or 16)
* @return mux value (0-4, or -1 if not found)
*/
-static int get_periph_clock_source(enum periph_id periph_id,
- enum clock_id parent, int *mux_bits, int *divider_bits)
+int get_periph_clock_source(enum periph_id periph_id,
+ enum clock_id parent, int *mux_bits, int *divider_bits)
{
enum clock_type_id type;
enum periphc_internal_id internal_id;
@@ -716,88 +504,6 @@
return -1;
}
-/**
- * Adjust peripheral PLL to use the given divider and source.
- *
- * @param periph_id peripheral to adjust
- * @param source Source number (0-3 or 0-7)
- * @param mux_bits Number of mux bits (2 or 4)
- * @param divider Required divider in 7.1 or 15.1 format
- * @return 0 if ok, -1 on error (requesting a parent clock which is not valid
- * for this peripheral)
- */
-static int adjust_periph_pll(enum periph_id periph_id, int source,
- int mux_bits, unsigned divider)
-{
- u32 *reg = get_periph_source_reg(periph_id);
-
- clrsetbits_le32(reg, OUT_CLK_DIVISOR_MASK,
- divider << OUT_CLK_DIVISOR_SHIFT);
- udelay(1);
-
- /* work out the source clock and set it */
- if (source < 0)
- return -1;
- if (mux_bits == 4) {
- clrsetbits_le32(reg, OUT_CLK_SOURCE4_MASK,
- source << OUT_CLK_SOURCE4_SHIFT);
- } else {
- clrsetbits_le32(reg, OUT_CLK_SOURCE_MASK,
- source << OUT_CLK_SOURCE_SHIFT);
- }
- udelay(2);
- return 0;
-}
-
-unsigned clock_adjust_periph_pll_div(enum periph_id periph_id,
- enum clock_id parent, unsigned rate, int *extra_div)
-{
- unsigned effective_rate;
- int mux_bits, source;
- int divider, divider_bits = 0;
-
- /* work out the source clock and set it */
- source = get_periph_clock_source(periph_id, parent, &mux_bits,
- ÷r_bits);
-
- if (extra_div)
- divider = find_best_divider(divider_bits, pll_rate[parent],
- rate, extra_div);
- else
- divider = clk_get_divider(divider_bits, pll_rate[parent],
- rate);
- assert(divider >= 0);
- if (adjust_periph_pll(periph_id, source, mux_bits, divider))
- return -1U;
- debug("periph %d, rate=%d, reg=%p = %x\n", periph_id, rate,
- get_periph_source_reg(periph_id),
- readl(get_periph_source_reg(periph_id)));
-
- /* Check what we ended up with. This shouldn't matter though */
- effective_rate = clock_get_periph_rate(periph_id, parent);
- if (extra_div)
- effective_rate /= *extra_div;
- if (rate != effective_rate)
- debug("Requested clock rate %u not honored (got %u)\n",
- rate, effective_rate);
- return effective_rate;
-}
-
-unsigned clock_start_periph_pll(enum periph_id periph_id,
- enum clock_id parent, unsigned rate)
-{
- unsigned effective_rate;
-
- reset_set_enable(periph_id, 1);
- clock_enable(periph_id);
-
- effective_rate = clock_adjust_periph_pll_div(periph_id, parent, rate,
- NULL);
-
- reset_set_enable(periph_id, 0);
- return effective_rate;
-}
-
void clock_set_enable(enum periph_id periph_id, int enable)
{
struct clk_rst_ctlr *clkrst =
@@ -819,16 +525,6 @@
writel(reg, clk);
}
-void clock_enable(enum periph_id clkid)
-{
- clock_set_enable(clkid, 1);
-}
-
-void clock_disable(enum periph_id clkid)
-{
- clock_set_enable(clkid, 0);
-}
-
void reset_set_enable(enum periph_id periph_id, int enable)
{
struct clk_rst_ctlr *clkrst =
@@ -850,146 +546,6 @@
writel(reg, reset);
}
-void reset_periph(enum periph_id periph_id, int us_delay)
-{
- /* Put peripheral into reset */
- reset_set_enable(periph_id, 1);
- udelay(us_delay);
-
- /* Remove reset */
- reset_set_enable(periph_id, 0);
-
- udelay(us_delay);
-}
-
-void reset_cmplx_set_enable(int cpu, int which, int reset)
-{
- struct clk_rst_ctlr *clkrst =
- (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
- u32 mask;
-
- /* Form the mask, which depends on the cpu chosen. Tegra3 has 4 */
- assert(cpu >= 0 && cpu < 4);
- mask = which << cpu;
-
- /* either enable or disable those reset for that CPU */
- if (reset)
- writel(mask, &clkrst->crc_cpu_cmplx_set);
- else
- writel(mask, &clkrst->crc_cpu_cmplx_clr);
-}
-
-unsigned clock_get_rate(enum clock_id clkid)
-{
- struct clk_pll *pll;
- u32 base;
- u32 divm;
- u64 parent_rate;
- u64 rate;
-
- parent_rate = osc_freq[clock_get_osc_freq()];
- if (clkid == CLOCK_ID_OSC)
- return parent_rate;
-
- pll = get_pll(clkid);
- base = readl(&pll->pll_base);
-
- /* Oh for bf_unpack()... */
- rate = parent_rate * ((base & PLL_DIVN_MASK) >> PLL_DIVN_SHIFT);
- divm = (base & PLL_DIVM_MASK) >> PLL_DIVM_SHIFT;
- if (clkid == CLOCK_ID_USB)
- divm <<= (base & PLLU_VCO_FREQ_MASK) >> PLLU_VCO_FREQ_SHIFT;
- else
- divm <<= (base & PLL_DIVP_MASK) >> PLL_DIVP_SHIFT;
- do_div(rate, divm);
- return rate;
-}
-
-/**
- * Set the output frequency you want for each PLL clock.
- * PLL output frequencies are programmed by setting their N, M and P values.
- * The governing equations are:
- * VCO = (Fi / m) * n, Fo = VCO / (2^p)
- * where Fo is the output frequency from the PLL.
- * Example: Set the output frequency to 216Mhz(Fo) with 12Mhz OSC(Fi)
- * 216Mhz = ((12Mhz / m) * n) / (2^p) so n=432,m=12,p=1
- * Please see Tegra TRM section 5.3 to get the detail for PLL Programming
- *
- * @param n PLL feedback divider(DIVN)
- * @param m PLL input divider(DIVN)
- * @param p post divider(DIVP)
- * @param cpcon base PLL charge pump(CPCON)
- * @return 0 if ok, -1 on error (the requested PLL is incorrect and cannot
- * be overriden), 1 if PLL is already correct
- */
-static int clock_set_rate(enum clock_id clkid, u32 n, u32 m, u32 p, u32 cpcon)
-{
- u32 base_reg;
- u32 misc_reg;
- struct clk_pll *pll;
-
- pll = get_pll(clkid);
-
- base_reg = readl(&pll->pll_base);
-
- /* Set BYPASS, m, n and p to PLL_BASE */
- base_reg &= ~PLL_DIVM_MASK;
- base_reg |= m << PLL_DIVM_SHIFT;
-
- base_reg &= ~PLL_DIVN_MASK;
- base_reg |= n << PLL_DIVN_SHIFT;
-
- base_reg &= ~PLL_DIVP_MASK;
- base_reg |= p << PLL_DIVP_SHIFT;
-
- if (clkid == CLOCK_ID_PERIPH) {
- /*
- * If the PLL is already set up, check that it is correct
- * and record this info for clock_verify() to check.
- */
- if (base_reg & PLL_BASE_OVRRIDE_MASK) {
- base_reg |= PLL_ENABLE_MASK;
- if (base_reg != readl(&pll->pll_base))
- pllp_valid = 0;
- return pllp_valid ? 1 : -1;
- }
- base_reg |= PLL_BASE_OVRRIDE_MASK;
- }
-
- base_reg |= PLL_BYPASS_MASK;
- writel(base_reg, &pll->pll_base);
-
- /* Set cpcon to PLL_MISC */
- misc_reg = readl(&pll->pll_misc);
- misc_reg &= ~PLL_CPCON_MASK;
- misc_reg |= cpcon << PLL_CPCON_SHIFT;
- writel(misc_reg, &pll->pll_misc);
-
- /* Enable PLL */
- base_reg |= PLL_ENABLE_MASK;
- writel(base_reg, &pll->pll_base);
-
- /* Disable BYPASS */
- base_reg &= ~PLL_BYPASS_MASK;
- writel(base_reg, &pll->pll_base);
-
- return 0;
-}
-
-void clock_ll_start_uart(enum periph_id periph_id)
-{
- /* Assert UART reset and enable clock */
- reset_set_enable(periph_id, 1);
- clock_enable(periph_id);
- clock_ll_set_source(periph_id, 0); /* UARTx_CLK_SRC = 00, PLLP_OUT0 */
-
- /* wait for 2us */
- udelay(2);
-
- /* De-assert reset to UART */
- reset_set_enable(periph_id, 0);
-}
-
#ifdef CONFIG_OF_CONTROL
/*
* Convert a device tree clock ID to our peripheral ID. They are mostly
@@ -999,7 +555,7 @@
* @param clk_id Clock ID according to tegra30 device tree binding
* @return peripheral ID, or PERIPH_ID_NONE if the clock ID is invalid
*/
-static enum periph_id clk_id_to_periph_id(int clk_id)
+enum periph_id clk_id_to_periph_id(int clk_id)
{
if (clk_id > PERIPH_ID_COUNT)
return PERIPH_ID_NONE;
@@ -1027,36 +583,8 @@
return clk_id;
}
}
-
-int clock_decode_periph_id(const void *blob, int node)
-{
- enum periph_id id;
- u32 cell[2];
- int err;
-
- err = fdtdec_get_int_array(blob, node, "clocks", cell,
- ARRAY_SIZE(cell));
- if (err)
- return -1;
- id = clk_id_to_periph_id(cell[1]);
- assert(clock_periph_id_isvalid(id));
- return id;
-}
#endif /* CONFIG_OF_CONTROL */
-int clock_verify(void)
-{
- struct clk_pll *pll = get_pll(CLOCK_ID_PERIPH);
- u32 reg = readl(&pll->pll_base);
-
- if (!pllp_valid) {
- printf("Warning: PLLP %x is not correct\n", reg);
- return -1;
- }
- debug("PLLP %x is correct\n", reg);
- return 0;
-}
-
void clock_early_init(void)
{
/*
@@ -1088,15 +616,3 @@
break;
}
}
-
-void clock_init(void)
-{
- pll_rate[CLOCK_ID_MEMORY] = clock_get_rate(CLOCK_ID_MEMORY);
- pll_rate[CLOCK_ID_PERIPH] = clock_get_rate(CLOCK_ID_PERIPH);
- pll_rate[CLOCK_ID_CGENERAL] = clock_get_rate(CLOCK_ID_CGENERAL);
- pll_rate[CLOCK_ID_OSC] = clock_get_rate(CLOCK_ID_OSC);
- pll_rate[CLOCK_ID_SFROM32KHZ] = 32768;
- debug("Osc = %d\n", pll_rate[CLOCK_ID_OSC]);
- debug("PLLM = %d\n", pll_rate[CLOCK_ID_MEMORY]);
- debug("PLLP = %d\n", pll_rate[CLOCK_ID_PERIPH]);
-}
diff --git a/arch/arm/include/asm/arch-tegra/clk_rst.h b/arch/arm/include/asm/arch-tegra/clk_rst.h
index 6a6e507..b64aa7d 100644
--- a/arch/arm/include/asm/arch-tegra/clk_rst.h
+++ b/arch/arm/include/asm/arch-tegra/clk_rst.h
@@ -199,8 +199,6 @@
};
/* CLK_RST_CONTROLLER_OSC_CTRL_0 */
-#define OSC_FREQ_SHIFT 30
-#define OSC_FREQ_MASK (3U << OSC_FREQ_SHIFT)
#define OSC_XOBP_SHIFT 1
#define OSC_XOBP_MASK (1U << OSC_XOBP_SHIFT)
diff --git a/arch/arm/include/asm/arch-tegra/clock.h b/arch/arm/include/asm/arch-tegra/clock.h
index 01f86ab..c8677bd 100644
--- a/arch/arm/include/asm/arch-tegra/clock.h
+++ b/arch/arm/include/asm/arch-tegra/clock.h
@@ -82,7 +82,7 @@
* @returns 0 if ok, -1 on error (invalid clock id)
*/
int clock_ll_read_pll(enum clock_id clkid, u32 *divm, u32 *divn,
- u32 *divp, u32 *cpcon, u32 *lfcon);
+ u32 *divp, u32 *cpcon, u32 *lfcon);
/*
* Enable a clock
@@ -262,4 +262,59 @@
/* Initialize the PLLs */
void clock_early_init(void);
-#endif /* _TEGRA_CLOCK_H_ */
+/* Returns a pointer to the clock source register for a peripheral */
+u32 *get_periph_source_reg(enum periph_id periph_id);
+
+/**
+ * Given a peripheral ID and the required source clock, this returns which
+ * value should be programmed into the source mux for that peripheral.
+ *
+ * There is special code here to handle the one source type with 5 sources.
+ *
+ * @param periph_id peripheral to start
+ * @param source PLL id of required parent clock
+ * @param mux_bits Set to number of bits in mux register: 2 or 4
+ * @param divider_bits Set to number of divider bits (8 or 16)
+ * @return mux value (0-4, or -1 if not found)
+ */
+int get_periph_clock_source(enum periph_id periph_id,
+ enum clock_id parent, int *mux_bits, int *divider_bits);
+
+/*
+ * Convert a device tree clock ID to our peripheral ID. They are mostly
+ * the same but we are very cautious so we check that a valid clock ID is
+ * provided.
+ *
+ * @param clk_id Clock ID according to tegra30 device tree binding
+ * @return peripheral ID, or PERIPH_ID_NONE if the clock ID is invalid
+ */
+enum periph_id clk_id_to_periph_id(int clk_id);
+
+/**
+ * Set the output frequency you want for each PLL clock.
+ * PLL output frequencies are programmed by setting their N, M and P values.
+ * The governing equations are:
+ * VCO = (Fi / m) * n, Fo = VCO / (2^p)
+ * where Fo is the output frequency from the PLL.
+ * Example: Set the output frequency to 216Mhz(Fo) with 12Mhz OSC(Fi)
+ * 216Mhz = ((12Mhz / m) * n) / (2^p) so n=432,m=12,p=1
+ * Please see Tegra TRM section 5.3 to get the detail for PLL Programming
+ *
+ * @param n PLL feedback divider(DIVN)
+ * @param m PLL input divider(DIVN)
+ * @param p post divider(DIVP)
+ * @param cpcon base PLL charge pump(CPCON)
+ * @return 0 if ok, -1 on error (the requested PLL is incorrect and cannot
+ * be overriden), 1 if PLL is already correct
+ */
+int clock_set_rate(enum clock_id clkid, u32 n, u32 m, u32 p, u32 cpcon);
+
+/* return 1 if a peripheral ID is in range */
+#define clock_type_id_isvalid(id) ((id) >= 0 && \
+ (id) < CLOCK_TYPE_COUNT)
+
+/* return 1 if a periphc_internal_id is in range */
+#define periphc_internal_id_isvalid(id) ((id) >= 0 && \
+ (id) < PERIPHC_COUNT)
+
+#endif /* _TEGRA_CLOCK_H_ */
diff --git a/arch/arm/include/asm/arch-tegra20/clock-tables.h b/arch/arm/include/asm/arch-tegra20/clock-tables.h
index 53708e0..6ec5ccb 100644
--- a/arch/arm/include/asm/arch-tegra20/clock-tables.h
+++ b/arch/arm/include/asm/arch-tegra20/clock-tables.h
@@ -193,4 +193,8 @@
#define clock_id_is_pll(id) ((id) >= CLOCK_ID_FIRST && \
(id) < CLOCK_ID_FIRST_SIMPLE)
+/* return 1 if a peripheral ID is in range */
+#define clock_periph_id_isvalid(id) ((id) >= PERIPH_ID_FIRST && \
+ (id) < PERIPH_ID_COUNT)
+
#endif /* _CLOCK_TABLES_H_ */
diff --git a/arch/arm/include/asm/arch-tegra20/clock.h b/arch/arm/include/asm/arch-tegra20/clock.h
index f592b95..491c02c 100644
--- a/arch/arm/include/asm/arch-tegra20/clock.h
+++ b/arch/arm/include/asm/arch-tegra20/clock.h
@@ -26,4 +26,8 @@
#include <asm/arch-tegra/clock.h>
+/* CLK_RST_CONTROLLER_OSC_CTRL_0 */
+#define OSC_FREQ_SHIFT 30
+#define OSC_FREQ_MASK (3U << OSC_FREQ_SHIFT)
+
#endif /* _TEGRA20_CLOCK_H */
diff --git a/arch/arm/include/asm/arch-tegra20/tegra.h b/arch/arm/include/asm/arch-tegra20/tegra.h
index ca98733..e1de044 100644
--- a/arch/arm/include/asm/arch-tegra20/tegra.h
+++ b/arch/arm/include/asm/arch-tegra20/tegra.h
@@ -33,4 +33,6 @@
#define BCT_ODMDATA_OFFSET 4068 /* 12 bytes from end of BCT */
+#define MAX_NUM_CPU 2
+
#endif /* TEGRA20_H */
diff --git a/arch/arm/include/asm/arch-tegra30/clock.h b/arch/arm/include/asm/arch-tegra30/clock.h
index 61fc4c8..2f24a75 100644
--- a/arch/arm/include/asm/arch-tegra30/clock.h
+++ b/arch/arm/include/asm/arch-tegra30/clock.h
@@ -21,4 +21,8 @@
#include <asm/arch-tegra/clock.h>
+/* CLK_RST_CONTROLLER_OSC_CTRL_0 */
+#define OSC_FREQ_SHIFT 28
+#define OSC_FREQ_MASK (0xF << OSC_FREQ_SHIFT)
+
#endif /* _TEGRA30_CLOCK_H_ */
diff --git a/arch/arm/include/asm/arch-tegra30/tegra.h b/arch/arm/include/asm/arch-tegra30/tegra.h
index 46a7474..decf564 100644
--- a/arch/arm/include/asm/arch-tegra30/tegra.h
+++ b/arch/arm/include/asm/arch-tegra30/tegra.h
@@ -23,4 +23,6 @@
#define BCT_ODMDATA_OFFSET 6116 /* 12 bytes from end of BCT */
+#define MAX_NUM_CPU 4
+
#endif /* TEGRA30_H */