armv8: ls1043ardb: Use static DDR setting for SPL boot
This board has soldered DDR chips. To reduce the SPL image size,
use static DDR setting instead of dynamic DDR driver.
Signed-off-by: York Sun <york.sun@nxp.com>
diff --git a/board/freescale/ls1043ardb/ddr.c b/board/freescale/ls1043ardb/ddr.c
index 354b864..fc0c1f6 100644
--- a/board/freescale/ls1043ardb/ddr.c
+++ b/board/freescale/ls1043ardb/ddr.c
@@ -169,18 +169,64 @@
return 0;
}
+#else
+
+phys_size_t fixed_sdram(void)
+{
+ int i;
+ char buf[32];
+ fsl_ddr_cfg_regs_t ddr_cfg_regs;
+ phys_size_t ddr_size;
+ ulong ddr_freq, ddr_freq_mhz;
+
+ ddr_freq = get_ddr_freq(0);
+ ddr_freq_mhz = ddr_freq / 1000000;
+
+ printf("Configuring DDR for %s MT/s data rate\n",
+ strmhz(buf, ddr_freq));
+
+ for (i = 0; fixed_ddr_parm_0[i].max_freq > 0; i++) {
+ if ((ddr_freq_mhz > fixed_ddr_parm_0[i].min_freq) &&
+ (ddr_freq_mhz <= fixed_ddr_parm_0[i].max_freq)) {
+ memcpy(&ddr_cfg_regs,
+ fixed_ddr_parm_0[i].ddr_settings,
+ sizeof(ddr_cfg_regs));
+ break;
+ }
+ }
+
+ if (fixed_ddr_parm_0[i].max_freq == 0)
+ panic("Unsupported DDR data rate %s MT/s data rate\n",
+ strmhz(buf, ddr_freq));
+
+ ddr_size = (phys_size_t)2048 * 1024 * 1024;
+ fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0, 0);
+
+ return ddr_size;
+}
#endif
int fsl_initdram(void)
{
phys_size_t dram_size;
+#ifdef CONFIG_SYS_DDR_RAW_TIMING
#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_SPL)
puts("Initializing DDR....\n");
dram_size = fsl_ddr_sdram();
#else
dram_size = fsl_ddr_sdram_size();
#endif
+#else
+#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_SPL)
+ puts("Initialzing DDR using fixed setting\n");
+ dram_size = fixed_sdram();
+#else
+ gd->ram_size = 0x80000000;
+
+ return 0;
+#endif
+#endif
erratum_a008850_post();
#ifdef CONFIG_FSL_DEEP_SLEEP
diff --git a/board/freescale/ls1043ardb/ddr.h b/board/freescale/ls1043ardb/ddr.h
index a77ddf3..6bc0eb6 100644
--- a/board/freescale/ls1043ardb/ddr.h
+++ b/board/freescale/ls1043ardb/ddr.h
@@ -45,4 +45,73 @@
udimm0,
};
+#ifndef CONFIG_SYS_DDR_RAW_TIMING
+fsl_ddr_cfg_regs_t ddr_cfg_regs_1600 = {
+ .cs[0].bnds = 0x0000007F,
+ .cs[1].bnds = 0,
+ .cs[2].bnds = 0,
+ .cs[3].bnds = 0,
+ .cs[0].config = 0x80040322,
+ .cs[0].config_2 = 0,
+ .cs[1].config = 0,
+ .cs[1].config_2 = 0,
+ .cs[2].config = 0,
+ .cs[3].config = 0,
+ .timing_cfg_3 = 0x010C1000,
+ .timing_cfg_0 = 0x91550018,
+ .timing_cfg_1 = 0xBBB48C42,
+ .timing_cfg_2 = 0x0048C111,
+ .ddr_sdram_cfg = 0xC50C0008,
+ .ddr_sdram_cfg_2 = 0x00401100,
+ .ddr_sdram_cfg_3 = 0,
+ .ddr_sdram_mode = 0x03010210,
+ .ddr_sdram_mode_2 = 0,
+ .ddr_sdram_mode_3 = 0x00010210,
+ .ddr_sdram_mode_4 = 0,
+ .ddr_sdram_mode_5 = 0x00010210,
+ .ddr_sdram_mode_6 = 0,
+ .ddr_sdram_mode_7 = 0x00010210,
+ .ddr_sdram_mode_8 = 0,
+ .ddr_sdram_mode_9 = 0x00000500,
+ .ddr_sdram_mode_10 = 0x04000000,
+ .ddr_sdram_mode_11 = 0x00000400,
+ .ddr_sdram_mode_12 = 0x04000000,
+ .ddr_sdram_mode_13 = 0x00000400,
+ .ddr_sdram_mode_14 = 0x04000000,
+ .ddr_sdram_mode_15 = 0x00000400,
+ .ddr_sdram_mode_16 = 0x04000000,
+ .ddr_sdram_interval = 0x18600618,
+ .ddr_data_init = 0xDEADBEEF,
+ .ddr_sdram_clk_cntl = 0x03000000,
+ .ddr_init_addr = 0,
+ .ddr_init_ext_addr = 0,
+ .timing_cfg_4 = 0x00000002,
+ .timing_cfg_5 = 0x03401400,
+ .timing_cfg_6 = 0,
+ .timing_cfg_7 = 0x13300000,
+ .timing_cfg_8 = 0x02115600,
+ .timing_cfg_9 = 0,
+ .ddr_zq_cntl = 0x8A090705,
+ .ddr_wrlvl_cntl = 0x8675F607,
+ .ddr_wrlvl_cntl_2 = 0x07090800,
+ .ddr_wrlvl_cntl_3 = 0,
+ .ddr_sr_cntr = 0,
+ .ddr_sdram_rcw_1 = 0,
+ .ddr_sdram_rcw_2 = 0,
+ .ddr_cdr1 = 0x80040000,
+ .ddr_cdr2 = 0x0000A181,
+ .dq_map_0 = 0,
+ .dq_map_1 = 0,
+ .dq_map_2 = 0,
+ .dq_map_3 = 0,
+ .debug[28] = 0x00700046,
+
+};
+
+fixed_ddr_parm_t fixed_ddr_parm_0[] = {
+ {1550, 1650, &ddr_cfg_regs_1600},
+ {0, 0, NULL}
+};
+
+#endif
#endif
diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h
index ca1d862..da87497 100644
--- a/include/configs/ls1043ardb.h
+++ b/include/configs/ls1043ardb.h
@@ -28,13 +28,13 @@
#define CONFIG_SYS_SPD_BUS_NUM 0
-#define CONFIG_FSL_DDR_BIST
#ifndef CONFIG_SPL
-#define CONFIG_FSL_DDR_INTERACTIVE /* Interactive debugging */
-#endif
#define CONFIG_SYS_DDR_RAW_TIMING
+#define CONFIG_FSL_DDR_INTERACTIVE /* Interactive debugging */
+#define CONFIG_FSL_DDR_BIST
#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
#define CONFIG_MEM_INIT_VALUE 0xdeadbeef
+#endif
#ifdef CONFIG_RAMBOOT_PBL
#define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1043ardb/ls1043ardb_pbi.cfg