mxc_nand: Update driver to work with i.MX31.
Tested on i.MX31 Litekit.
Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index eb0323f..fc111b5 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -149,6 +149,36 @@
};
#endif
+#ifdef CONFIG_MX27
+static int is_16bit_nand(void)
+{
+ struct system_control_regs *sc_regs =
+ (struct system_control_regs *)IMX_SYSTEM_CTL_BASE;
+
+ if (readl(&sc_regs->fmcr) & NF_16BIT_SEL)
+ return 1;
+ else
+ return 0;
+}
+#elif defined(CONFIG_MX31)
+static int is_16bit_nand(void)
+{
+ struct clock_control_regs *sc_regs =
+ (struct clock_control_regs *)CCM_BASE;
+
+ if (readl(&sc_regs->rcsr) & CCM_RCSR_NF16B)
+ return 1;
+ else
+ return 0;
+}
+#else
+#warning "8/16 bit NAND autodetection not supported"
+static int is_16bit_nand(void)
+{
+ return 0;
+}
+#endif
+
static uint32_t *mxc_nand_memcpy32(uint32_t *dest, uint32_t *source, size_t size)
{
uint32_t *d = dest;
@@ -808,8 +838,6 @@
int board_nand_init(struct nand_chip *this)
{
- struct system_control_regs *sc_regs =
- (struct system_control_regs *)IMX_SYSTEM_CTL_BASE;
struct mtd_info *mtd;
uint16_t tmp;
int err = 0;
@@ -871,7 +899,7 @@
writew(0x4, &host->regs->nfc_wrprot);
/* NAND bus width determines access funtions used by upper layer */
- if (readl(&sc_regs->fmcr) & NF_16BIT_SEL)
+ if (is_16bit_nand())
this->options |= NAND_BUSWIDTH_16;
host->pagesize_2k = 0;