mpc83xx: Changed to unified mpx83xx names and added common 83xx changes
Incorporated the common unified variable names and the changes in preparation
for releasing mpc8360 patches.
Signed-off-by: Dave Liu <daveliu@freescale.com>
diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c
index 20bba6c..8d543d5 100644
--- a/cpu/mpc83xx/cpu.c
+++ b/cpu/mpc83xx/cpu.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2004 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -195,7 +195,7 @@
void dma_init(void)
{
volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
- volatile dma8349_t *dma = &immap->dma;
+ volatile dma83xx_t *dma = &immap->dma;
volatile u32 status = swab32(dma->dmasr0);
volatile u32 dmamr0 = swab32(dma->dmamr0);
@@ -226,7 +226,7 @@
uint dma_check(void)
{
volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
- volatile dma8349_t *dma = &immap->dma;
+ volatile dma83xx_t *dma = &immap->dma;
volatile u32 status = swab32(dma->dmasr0);
volatile u32 byte_count = swab32(dma->dmabcr0);
@@ -245,7 +245,7 @@
int dma_xfer(void *dest, u32 count, void *src)
{
volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
- volatile dma8349_t *dma = &immap->dma;
+ volatile dma83xx_t *dma = &immap->dma;
volatile u32 dmamr0;
/* initialize DMASARn, DMADAR and DMAABCRn */
diff --git a/cpu/mpc83xx/i2c.c b/cpu/mpc83xx/i2c.c
index 70450f9..723feeb 100644
--- a/cpu/mpc83xx/i2c.c
+++ b/cpu/mpc83xx/i2c.c
@@ -1,4 +1,6 @@
/*
+ * (C) Copyright 2006 Freescale Semiconductor, Inc.
+ *
* (C) Copyright 2003,Motorola Inc.
* Xianghua Xiao <x.xiao@motorola.com>
* Adapted for Motorola 85xx chip.
@@ -31,6 +33,8 @@
*
* 20050101: Eran Liberty (liberty@freescale.com)
* Initial file creating (porting from 85XX & 8260)
+ * 20060601: Dave Liu (daveliu@freescale.com)
+ * Unified variable names for mpc83xx
*/
#include <common.h>
@@ -42,7 +46,7 @@
#include <asm/i2c.h>
#if defined(CONFIG_MPC8349EMDS) || defined(CONFIG_TQM834X)
-i2c_t * mpc8349_i2c = (i2c_t*)(CFG_IMMRBAR + CFG_I2C_OFFSET);
+i2c_t * mpc83xx_i2c = (i2c_t*)(CFG_IMMRBAR + CFG_I2C_OFFSET);
#endif
void
@@ -52,7 +56,7 @@
writeb(0x00 , &I2C->cr);
/* set clock */
- writeb(0x3f, &I2C->fdr);
+ writeb(speed, &I2C->fdr);
/* set default filter */
writeb(0x10,&I2C->dfsrr);
diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c
index 48624fe..153848d 100644
--- a/cpu/mpc83xx/spd_sdram.c
+++ b/cpu/mpc83xx/spd_sdram.c
@@ -1,4 +1,6 @@
/*
+ * (C) Copyright 2006 Freescale Semiconductor, Inc.
+ *
* (C) Copyright 2006
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
@@ -28,6 +30,10 @@
*
* 20050101: Eran Liberty (liberty@freescale.com)
* Initial file creating (porting from 85XX & 8260)
+ * 20060601: Dave Liu (daveliu@freescale.com)
+ * DDR ECC support
+ * unify variable names for 83xx
+ * code cleanup
*/
#include <common.h>
@@ -39,7 +45,7 @@
#ifdef CONFIG_SPD_EEPROM
-#if defined(CONFIG_DDR_ECC)
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC)
extern void dma_init(void);
extern uint dma_check(void);
extern int dma_xfer(void *dest, uint count, void *src);
@@ -52,15 +58,18 @@
/*
* Convert picoseconds into clock cycles (rounding up if needed).
*/
+extern ulong get_ddr_clk(ulong dummy);
int
picos_to_clk(int picos)
{
+ unsigned int ddr_bus_clk;
int clks;
- clks = picos / (2000000000 / (get_bus_freq(0) / 1000));
- if (picos % (2000000000 / (get_bus_freq(0) / 1000)) != 0) {
- clks++;
+ ddr_bus_clk = get_ddr_clk(0) >> 1;
+ clks = picos / ((1000000000 / ddr_bus_clk) * 1000);
+ if (picos % ((1000000000 / ddr_bus_clk) * 1000) !=0) {
+ clks++;
}
return clks;
@@ -104,32 +113,53 @@
long int spd_sdram()
{
volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
- volatile ddr8349_t *ddr = &immap->ddr;
- volatile law8349_t *ecm = &immap->sysconf.ddrlaw[0];
+ volatile ddr83xx_t *ddr = &immap->ddr;
+ volatile law83xx_t *ecm = &immap->sysconf.ddrlaw[0];
spd_eeprom_t spd;
- unsigned tmp, tmp1;
+ unsigned tmp;
unsigned int memsize;
unsigned int law_size;
- unsigned char caslat;
- unsigned int trfc, trfc_clk, trfc_low;
+ unsigned char caslat, caslat_ctrl;
+ unsigned char burstlen;
+ unsigned int max_bus_clk;
+ unsigned int max_data_rate, effective_data_rate;
+ unsigned int ddrc_clk;
+ unsigned int refresh_clk;
+ unsigned sdram_cfg;
+ unsigned int ddrc_ecc_enable;
+
+ /* Read SPD parameters with I2C */
CFG_READ_SPD(SPD_EEPROM_ADDRESS, 0, 1, (uchar *) & spd, sizeof (spd));
#ifdef SPD_DEBUG
spd_debug(&spd);
#endif
+ /* Check the memory type */
+ if (spd.mem_type != SPD_MEMTYPE_DDR) {
+ printf("DDR: Module mem type is %02X\n", spd.mem_type);
+ return 0;
+ }
+
+ /* Check the number of physical bank */
if (spd.nrows > 2) {
- puts("DDR:Only two chip selects are supported on ADS.\n");
+ printf("DDR: The number of physical bank is %02X\n", spd.nrows);
return 0;
}
- if (spd.nrow_addr < 12
- || spd.nrow_addr > 14
- || spd.ncol_addr < 8
- || spd.ncol_addr > 11) {
- puts("DDR:Row or Col number unsupported.\n");
+ /* Check if the number of row of the module is in the range of DDRC */
+ if (spd.nrow_addr < 12 || spd.nrow_addr > 14) {
+ printf("DDR: Row number is out of range of DDRC, row=%02X\n",
+ spd.nrow_addr);
return 0;
}
+ /* Check if the number of col of the module is in the range of DDRC */
+ if (spd.ncol_addr < 8 || spd.ncol_addr > 11) {
+ printf("DDR: Col number is out of range of DDRC, col=%02X\n",
+ spd.ncol_addr);
+ return 0;
+ }
+ /* Setup DDR chip select register */
ddr->csbnds[2].csbnds = (banksize(spd.row_dens) >> 24) - 1;
ddr->cs_config[2] = ( 1 << 31
| (spd.nrow_addr - 12) << 8
@@ -172,54 +202,84 @@
debug("DDR:ar=0x%08x\n", ecm->ar);
/*
- * find the largest CAS
+ * Find the largest CAS by locating the highest 1 bit
+ * in the spd.cas_lat field. Translate it to a DDR
+ * controller field value:
+ *
+ * CAS Lat DDR I Ctrl
+ * Clocks SPD Bit Value
+ * -------+--------+---------
+ * 1.0 0 001
+ * 1.5 1 010
+ * 2.0 2 011
+ * 2.5 3 100
+ * 3.0 4 101
+ * 3.5 5 110
+ * 4.0 6 111
*/
- if(spd.cas_lat & 0x40) {
- caslat = 7;
- } else if (spd.cas_lat & 0x20) {
- caslat = 6;
- } else if (spd.cas_lat & 0x10) {
- caslat = 5;
- } else if (spd.cas_lat & 0x08) {
- caslat = 4;
- } else if (spd.cas_lat & 0x04) {
- caslat = 3;
- } else if (spd.cas_lat & 0x02) {
- caslat = 2;
- } else if (spd.cas_lat & 0x01) {
- caslat = 1;
- } else {
- puts("DDR:no valid CAS Latency information.\n");
+ caslat = __ilog2(spd.cas_lat);
+
+ if (caslat > 4 ) {
+ printf("DDR: Invalid SPD CAS Latency, caslat=%02X\n", caslat);
return 0;
}
+ max_bus_clk = 1000 *10 / (((spd.clk_cycle & 0xF0) >> 4) * 10
+ + (spd.clk_cycle & 0x0f));
+ max_data_rate = max_bus_clk * 2;
- tmp = 20000 / (((spd.clk_cycle & 0xF0) >> 4) * 10
- + (spd.clk_cycle & 0x0f));
- debug("DDR:Module maximum data rate is: %dMhz\n", tmp);
+ debug("DDR:Module maximum data rate is: %dMhz\n", max_data_rate);
- tmp1 = get_bus_freq(0) / 1000000;
- if (tmp1 < 230 && tmp1 >= 90 && tmp >= 230) {
- /* 90~230 range, treated as DDR 200 */
- if (spd.clk_cycle3 == 0xa0)
- caslat -= 2;
- else if(spd.clk_cycle2 == 0xa0)
- caslat--;
- } else if (tmp1 < 280 && tmp1 >= 230 && tmp >= 280) {
- /* 230-280 range, treated as DDR 266 */
- if (spd.clk_cycle3 == 0x75)
- caslat -= 2;
- else if (spd.clk_cycle2 == 0x75)
- caslat--;
- } else if (tmp1 < 350 && tmp1 >= 280 && tmp >= 350) {
- /* 280~350 range, treated as DDR 333 */
- if (spd.clk_cycle3 == 0x60)
- caslat -= 2;
- else if (spd.clk_cycle2 == 0x60)
- caslat--;
- } else if (tmp1 < 90 || tmp1 >= 350) {
- /* DDR rate out-of-range */
- puts("DDR:platform frequency is not fit for DDR rate\n");
+ ddrc_clk = get_ddr_clk(0) / 1000000;
+
+ if (max_data_rate >= 390) { /* it is DDR 400 */
+ printf("DDR: platform not support DDR 400\n");
return 0;
+ } else if (max_data_rate >= 323) { /* it is DDR 333 */
+ if (ddrc_clk <= 350 && ddrc_clk > 280) {
+ /* DDRC clk at 280~350 */
+ effective_data_rate = 333; /* 6ns */
+ caslat = caslat;
+ } else if (ddrc_clk <= 280 && ddrc_clk > 230) {
+ /* DDRC clk at 230~280 */
+ if (spd.clk_cycle2 == 0x75) {
+ effective_data_rate = 266; /* 7.5ns */
+ caslat = caslat - 1;
+ }
+ } else if (ddrc_clk <= 230 && ddrc_clk > 90) {
+ /* DDRC clk at 90~230 */
+ if (spd.clk_cycle3 == 0xa0) {
+ effective_data_rate = 200; /* 10ns */
+ caslat = caslat - 2;
+ }
+ }
+ } else if (max_data_rate >= 256) { /* it is DDR 266 */
+ if (ddrc_clk <= 350 && ddrc_clk > 280) {
+ /* DDRC clk at 280~350 */
+ printf("DDR: DDR controller freq is more than "
+ "max data rate of the module\n");
+ return 0;
+ } else if (ddrc_clk <= 280 && ddrc_clk > 230) {
+ /* DDRC clk at 230~280 */
+ effective_data_rate = 266; /* 7.5ns */
+ caslat = caslat;
+ } else if (ddrc_clk <= 230 && ddrc_clk > 90) {
+ /* DDRC clk at 90~230 */
+ if (spd.clk_cycle2 == 0xa0) {
+ effective_data_rate = 200; /* 10ns */
+ caslat = caslat - 1;
+ }
+ }
+ } else if (max_data_rate >= 190) { /* it is DDR 200 */
+ if (ddrc_clk <= 350 && ddrc_clk > 230) {
+ /* DDRC clk at 230~350 */
+ printf("DDR: DDR controller freq is more than "
+ "max data rate of the module\n");
+ return 0;
+ } else if (ddrc_clk <= 230 && ddrc_clk > 90) {
+ /* DDRC clk at 90~230 */
+ effective_data_rate = 200; /* 10ns */
+ caslat = caslat;
+ }
}
/*
@@ -229,16 +289,14 @@
* note: WRREC(Twr) and WRTORD(Twtr) are not in SPD,
* use conservative value here.
*/
- trfc = spd.trfc * 1000; /* up to ps */
- trfc_clk = picos_to_clk(trfc);
- trfc_low = (trfc_clk - 8) & 0xf;
+ caslat_ctrl = (caslat + 1) & 0x07; /* see as above */
ddr->timing_cfg_1 =
(((picos_to_clk(spd.trp * 250) & 0x07) << 28 ) |
((picos_to_clk(spd.tras * 1000) & 0x0f ) << 24 ) |
((picos_to_clk(spd.trcd * 250) & 0x07) << 20 ) |
- ((caslat & 0x07) << 16 ) |
- (trfc_low << 12 ) |
+ ((caslat_ctrl & 0x07) << 16 ) |
+ (((picos_to_clk(spd.trfc * 1000) - 8) & 0x0f) << 12 ) |
( 0x300 ) |
((picos_to_clk(spd.trrd * 250) & 0x07) << 4) | 1);
@@ -246,36 +304,49 @@
debug("DDR:timing_cfg_1=0x%08x\n", ddr->timing_cfg_1);
debug("DDR:timing_cfg_2=0x%08x\n", ddr->timing_cfg_2);
+ /* Setup init value, but not enable */
+ ddr->sdram_cfg = 0x42000000;
- /*
- * Only DDR I is supported
- * DDR I and II have different mode-register-set definition
+ /* Check DIMM data bus width */
+ if (spd.dataw_lsb == 0x20)
+ {
+ burstlen = 0x03; /* 32 bit data bus, burst len is 8 */
+ printf("\n DDR DIMM: data bus width is 32 bit");
+ }
+ else
+ {
+ burstlen = 0x02; /* Others act as 64 bit bus, burst len is 4 */
+ printf("\n DDR DIMM: data bus width is 64 bit");
+ }
+
+ /* Is this an ECC DDR chip? */
+ if (spd.config == 0x02) {
+ printf(" with ECC\n");
+ }
+ else
+ printf(" without ECC\n");
+
+ /* Burst length is always 4 for 64 bit data bus, 8 for 32 bit data bus,
+ Burst type is sequential
*/
switch(caslat) {
+ case 1:
+ ddr->sdram_mode = 0x50 | burstlen; /* CL=1.5 */
+ break;
case 2:
- tmp = 0x50; /* 1.5 */
+ ddr->sdram_mode = 0x20 | burstlen; /* CL=2.0 */
break;
case 3:
- tmp = 0x20; /* 2.0 */
+ ddr->sdram_mode = 0x60 | burstlen; /* CL=2.5 */
break;
case 4:
- tmp = 0x60; /* 2.5 */
- break;
- case 5:
- tmp = 0x30; /* 3.0 */
+ ddr->sdram_mode = 0x30 | burstlen; /* CL=3.0 */
break;
default:
- puts("DDR:only CAS Latency 1.5, 2.0, 2.5, 3.0 is supported.\n");
+ printf("DDR:only CAS Latency 1.5, 2.0, 2.5, 3.0 "
+ "is supported.\n");
return 0;
}
-#if defined (CONFIG_DDR_32BIT)
- /* set burst length to 8 for 32-bit data path */
- tmp |= 0x03;
-#else
- /* set burst length to 4 - default for 64-bit data path */
- tmp |= 0x02;
-#endif
- ddr->sdram_mode = tmp;
debug("DDR:sdram_mode=0x%08x\n", ddr->sdram_mode);
switch(spd.refresh) {
@@ -315,33 +386,15 @@
ddr->sdram_interval = ((tmp & 0x3fff) << 16) | 0x100;
debug("DDR:sdram_interval=0x%08x\n", ddr->sdram_interval);
- /*
- * Is this an ECC DDR chip?
- */
-#if defined(CONFIG_DDR_ECC)
- if (spd.config == 0x02) {
- /* disable error detection */
- ddr->err_disable = ~ECC_ERROR_ENABLE;
+ /* SS_EN = 0, source synchronous disable
+ * CLK_ADJST = 0, MCK/MCK# is launched aligned with addr/cmd
+ */
+ ddr->sdram_clk_cntl = 0x00000000;
+ debug("DDR:sdram_clk_cntl=0x%08x\n", ddr->sdram_clk_cntl);
- /* set single bit error threshold to maximum value,
- * reset counter to zero */
- ddr->err_sbe = (255 << ECC_ERROR_MAN_SBET_SHIFT) |
- (0 << ECC_ERROR_MAN_SBEC_SHIFT);
- }
- debug("DDR:err_disable=0x%08x\n", ddr->err_disable);
- debug("DDR:err_sbe=0x%08x\n", ddr->err_sbe);
-#endif
asm("sync;isync");
- udelay(500);
-
- /*
- * SS_EN=1,
- * CLK_ADJST = 2-MCK/MCK_B, is lauched 1/2 of one SDRAM
- * clock cycle after address/command
- */
- /*ddr->sdram_clk_cntl = 0x82000000;*/
- ddr->sdram_clk_cntl = (DDR_SDRAM_CLK_CNTL_SS_EN|DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05);
+ udelay(600);
/*
* Figure out the settings for the sdram_cfg register. Build up
@@ -352,38 +405,48 @@
* sdram_cfg[0] = 1 (ddr sdram logic enable)
* sdram_cfg[1] = 1 (self-refresh-enable)
* sdram_cfg[6:7] = 2 (SDRAM type = DDR SDRAM)
+ * sdram_cfg[12] = 0 (32_BE =0 , 64 bit bus mode)
+ * sdram_cfg[13] = 0 (8_BE =0, 4-beat bursts)
*/
- tmp = 0xc2000000;
+ sdram_cfg = 0xC2000000;
-#if defined (CONFIG_DDR_32BIT)
- /* in 32-Bit mode burst len is 8 beats */
- tmp |= (SDRAM_CFG_32_BE | SDRAM_CFG_8_BE);
-#endif
- /*
- * sdram_cfg[3] = RD_EN - registered DIMM enable
- * A value of 0x26 indicates micron registered DIMMS (micron.com)
- */
- if (spd.mod_attr == 0x26) {
- tmp |= 0x10000000;
+ /* sdram_cfg[3] = RD_EN - registered DIMM enable */
+ if (spd.mod_attr & 0x02) {
+ sdram_cfg |= 0x10000000;
}
+ /* The DIMM is 32bit width */
+ if (spd.dataw_lsb == 0x20) {
+ sdram_cfg |= 0x000C0000;
+ }
+ ddrc_ecc_enable = 0;
+
#if defined(CONFIG_DDR_ECC)
- /*
- * If the user wanted ECC (enabled via sdram_cfg[2])
- */
+ /* Enable ECC with sdram_cfg[2] */
if (spd.config == 0x02) {
- tmp |= SDRAM_CFG_ECC_EN;
+ sdram_cfg |= 0x20000000;
+ ddrc_ecc_enable = 1;
+ /* disable error detection */
+ ddr->err_disable = ~ECC_ERROR_ENABLE;
+ /* set single bit error threshold to maximum value,
+ * reset counter to zero */
+ ddr->err_sbe = (255 << ECC_ERROR_MAN_SBET_SHIFT) |
+ (0 << ECC_ERROR_MAN_SBEC_SHIFT);
}
+
+ debug("DDR:err_disable=0x%08x\n", ddr->err_disable);
+ debug("DDR:err_sbe=0x%08x\n", ddr->err_sbe);
#endif
+ printf(" DDRC ECC mode: %s", ddrc_ecc_enable ? "ON":"OFF");
#if defined(CONFIG_DDR_2T_TIMING)
/*
* Enable 2T timing by setting sdram_cfg[16].
*/
- tmp |= SDRAM_CFG_2T_EN;
+ sdram_cfg |= SDRAM_CFG_2T_EN;
#endif
-
- ddr->sdram_cfg = tmp;
+ /* Enable controller, and GO! */
+ ddr->sdram_cfg = sdram_cfg;
asm("sync;isync");
udelay(500);
@@ -393,7 +456,7 @@
#endif /* CONFIG_SPD_EEPROM */
-#if defined(CONFIG_DDR_ECC)
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC)
/*
* Use timebase counter, get_timer() is not availabe
* at this point of initialization yet.
@@ -431,7 +494,7 @@
{
uint *p;
volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
- volatile ddr8349_t *ddr = &immap->ddr;
+ volatile ddr83xx_t *ddr= &immap->ddr;
unsigned long t_start, t_end;
#if defined(CONFIG_DDR_ECC_INIT_VIA_DMA)
uint i;
diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c
index ad6b3f6..412713f 100644
--- a/cpu/mpc83xx/speed.c
+++ b/cpu/mpc83xx/speed.c
@@ -337,6 +337,12 @@
return 0;
}
+ulong get_ddr_clk(ulong dummy)
+{
+ return gd->ddr_clk;
+}
+
+
/********************************************
* get_bus_freq
* return system bus freq in Hz