net: rtl8139: Rework eeprom_delay() macro
The macro assumes ee_addr variable to be present when it's being
used. Rework the macro into a function instead and pass it an
argument specifying the register base address, to make it future
proof for DM conversion.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
diff --git a/drivers/net/rtl8139.c b/drivers/net/rtl8139.c
index 9898f20..ff014ad 100644
--- a/drivers/net/rtl8139.c
+++ b/drivers/net/rtl8139.c
@@ -73,6 +73,7 @@
#include <common.h>
#include <cpu_func.h>
+#include <linux/types.h>
#include <malloc.h>
#include <net.h>
#include <netdev.h>
@@ -297,18 +298,20 @@
#define EE_DATA_READ 0x01 /* EEPROM chip data out. */
#define EE_ENB (0x80 | EE_CS)
-/*
- Delay between EEPROM clock transitions.
- No extra delay is needed with 33MHz PCI, but 66MHz may change this.
-*/
-
-#define eeprom_delay() inl(ee_addr)
-
/* The EEPROM commands include the alway-set leading bit. */
#define EE_WRITE_CMD 5
#define EE_READ_CMD 6
#define EE_ERASE_CMD 7
+static void rtl8139_eeprom_delay(uintptr_t regbase)
+{
+ /*
+ * Delay between EEPROM clock transitions.
+ * No extra delay is needed with 33MHz PCI, but 66MHz may change this.
+ */
+ inl(regbase + RTL_REG_CFG9346);
+}
+
static int read_eeprom(int location, int addr_len)
{
int i;
@@ -318,30 +321,30 @@
outb(EE_ENB & ~EE_CS, ee_addr);
outb(EE_ENB, ee_addr);
- eeprom_delay();
+ rtl8139_eeprom_delay(ioaddr);
/* Shift the read command bits out. */
for (i = 4 + addr_len; i >= 0; i--) {
int dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
outb(EE_ENB | dataval, ee_addr);
- eeprom_delay();
+ rtl8139_eeprom_delay(ioaddr);
outb(EE_ENB | dataval | EE_SHIFT_CLK, ee_addr);
- eeprom_delay();
+ rtl8139_eeprom_delay(ioaddr);
}
outb(EE_ENB, ee_addr);
- eeprom_delay();
+ rtl8139_eeprom_delay(ioaddr);
for (i = 16; i > 0; i--) {
outb(EE_ENB | EE_SHIFT_CLK, ee_addr);
- eeprom_delay();
+ rtl8139_eeprom_delay(ioaddr);
retval = (retval << 1) | ((inb(ee_addr) & EE_DATA_READ) ? 1 : 0);
outb(EE_ENB, ee_addr);
- eeprom_delay();
+ rtl8139_eeprom_delay(ioaddr);
}
/* Terminate the EEPROM access. */
outb(~EE_CS, ee_addr);
- eeprom_delay();
+ rtl8139_eeprom_delay(ioaddr);
return retval;
}