* Patch by Paul Ruhland, 10 Jun 2004:
fix support for Logic SDK-LH7A404 board and clean up the
LH7A404 register macros.
* Patch by Matthew McClintock, 10 Jun 2004:
Modify code to select correct serial clock on Sandpoint8245
diff --git a/include/configs/lpd7a404.h b/include/configs/lpd7a404.h
new file mode 100644
index 0000000..de465ea
--- /dev/null
+++ b/include/configs/lpd7a404.h
@@ -0,0 +1,112 @@
+/*
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __LPD7A404_H_
+#define __LPD7A404_H_
+
+#define CONFIG_LPD7A404 /* Logic LH7A400 SDK */
+
+/*
+ * If we are developing, we might want to start armboot from ram
+ * so we MUST NOT initialize critical regs like mem-timing ...
+ */
+#define CONFIG_INIT_CRITICAL /* undef for developing */
+
+#undef CONFIG_USE_IRQ
+
+/*
+ * This board uses the logic LH7A404-10 card engine
+ */
+#include <configs/lpd7a404-10.h>
+
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG 1
+
+/*
+ * Size of malloc() pool
+ */
+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_CONSOLE_UART2 /* UART2 LH7A40x for console */
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_IPADDR 192.168.1.100
+#define CONFIG_NETMASK 255.255.1.0
+#define CONFIG_SERVERIP 192.168.1.1
+
+#define CONFIG_TIMESTAMP 1 /* Print timestamp info for images */
+
+#ifndef USE_920T_MMU
+#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING) & ~(CFG_CMD_CACHE))
+#else
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DATE)
+#endif
+
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CONFIG_BOOTDELAY 3
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
+/* what's this ? it's not used anywhere */
+#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "LPD7A404> " /* Monitor Command Prompt */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0xc0300000 /* memtest works on */
+#define CFG_MEMTEST_END 0xc0500000 /* 2 MB in DRAM */
+
+#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
+
+#define CFG_LOAD_ADDR 0xc0f00000 /* default load address */
+
+/* valid baudrates */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+/* size and location of u-boot in flash */
+#define CFG_MONITOR_BASE CFG_FLASH_BASE
+#define CFG_MONITOR_LEN (256<<10)
+
+#define CFG_ENV_IS_IN_FLASH 1
+
+/* Address and size of Primary Environment Sector */
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0xFC0000)
+#define CFG_ENV_SIZE 0x40000
+
+#endif /* __LPD7A404_H_ */