armv7: LS1021a: enable i-cache in start.S
Delete CONFIG_SKIP_LOWLEVEL_INIT define in ls1021atwr.h and
ls1021aqds.h can let it run cpu_init_cp15 to enable i-cache. First
stage of u-boot can run faster after that. There is a description
about skip lowlevel init in board/freescale/ls1021atwr/README.
Signed-off-by: Xiaoliang Yang <xiaoliang.yang@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
diff --git a/board/freescale/ls1021atwr/README b/board/freescale/ls1021atwr/README
index d2821cb..896a659 100644
--- a/board/freescale/ls1021atwr/README
+++ b/board/freescale/ls1021atwr/README
@@ -107,3 +107,9 @@
0x00_4000_0000 0x00_5FFF_FFFF QSPI 512MB
0x00_6000_0000 0x00_67FF_FFFF IFC - NOR Flash 128MB
0x00_8000_0000 0x00_FFFF_FFFF DRAM1 2GB
+
+LS1021a rev1.0 Soc specific Options/Settings
+--------------------------------------------
+If the LS1021a Soc is rev1.0, you need modify the configure file.
+Add the following define in include/configs/ls1021atwr.h:
+#define CONFIG_SKIP_LOWLEVEL_INIT