ls102xa: Fix reset hang
Since commit 623d96e89aca6("imx: wdog: correct wcr register settings")
issuing a 'reset' command causes the system to hang.
Unlike i.MX and Vybrid, the watchdog controller on LS102x is big-endian.
This means that the watchdog on LS1021 has been working by accident as
it does not use the big-endian accessors in drivers/watchdog/imx_watchdog.c.
Commit 623d96e89aca6("imx: wdog: correct wcr register settings") only
revelead the endianness problem on LS102x.
In order to fix the reset hang, introduce a reset_cpu() implementation that
is specific for ls102x, which accesses the watchdog WCR register in big-endian
format. All that is required to reset LS102x is to clear the SRS bit.
This approach is a temporary workaround to avoid a regression for LS102x
in the 2015.10 release. The proper fix is to make the watchdog driver
endian-aware, so that it can work for i.MX, Vybrid and LS102x.
Reported-by: Sinan Akman <sinan@writeme.com>
Tested-by: Sinan Akman <sinan@writeme.com>
Reviewed-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
diff --git a/arch/arm/cpu/armv7/ls102xa/cpu.c b/arch/arm/cpu/armv7/ls102xa/cpu.c
index 8dd95d9..e2eb5f3 100644
--- a/arch/arm/cpu/armv7/ls102xa/cpu.c
+++ b/arch/arm/cpu/armv7/ls102xa/cpu.c
@@ -13,6 +13,8 @@
#include <tsec.h>
#include <netdev.h>
#include <fsl_esdhc.h>
+#include <config.h>
+#include <fsl_wdog.h>
#include "fsl_epu.h"
@@ -354,3 +356,16 @@
asm volatile("sev");
}
#endif
+
+void reset_cpu(ulong addr)
+{
+ struct watchdog_regs *wdog = (struct watchdog_regs *)WDOG1_BASE_ADDR;
+
+ clrbits_be16(&wdog->wcr, WCR_SRS);
+
+ while (1) {
+ /*
+ * Let the watchdog trigger
+ */
+ }
+}
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 9e9cb55..a007ae8 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -7,7 +7,7 @@
obj-$(CONFIG_AT91SAM9_WATCHDOG) += at91sam9_wdt.o
obj-$(CONFIG_FTWDT010_WATCHDOG) += ftwdt010_wdt.o
-ifneq (,$(filter $(SOC), mx31 mx35 mx5 mx6 mx7 vf610 ls102xa))
+ifneq (,$(filter $(SOC), mx31 mx35 mx5 mx6 mx7 vf610))
obj-y += imx_watchdog.o
endif
obj-$(CONFIG_S5P) += s5p_wdt.o