ftsdc010: add support of ftsdc010 mmc controller
Faraday FTSDC010 controller is a SD/MMC controller for SoC chip.
Signed-off-by: Macpaul Lin <macpaul@andestech.com>
diff --git a/include/faraday/ftsdc010.h b/include/faraday/ftsdc010.h
new file mode 100644
index 0000000..c34dde7
--- /dev/null
+++ b/include/faraday/ftsdc010.h
@@ -0,0 +1,245 @@
+/*
+ * Faraday FTSDC010 Secure Digital Memory Card Host Controller
+ *
+ * Copyright (C) 2011 Andes Technology Corporation
+ * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __FTSDC010_H
+#define __FTSDC010_H
+
+#ifndef __ASSEMBLY__
+/* sd controller register */
+struct ftsdc010_mmc {
+ unsigned int cmd; /* 0x00 - command reg */
+ unsigned int argu; /* 0x04 - argument reg */
+ unsigned int rsp0; /* 0x08 - response reg0 */
+ unsigned int rsp1; /* 0x0c - response reg1 */
+ unsigned int rsp2; /* 0x10 - response reg2 */
+ unsigned int rsp3; /* 0x14 - response reg3 */
+ unsigned int rsp_cmd; /* 0x18 - responded cmd reg */
+ unsigned int dcr; /* 0x1c - data control reg */
+ unsigned int dtr; /* 0x20 - data timer reg */
+ unsigned int dlr; /* 0x24 - data length reg */
+ unsigned int status; /* 0x28 - status reg */
+ unsigned int clr; /* 0x2c - clear reg */
+ unsigned int int_mask; /* 0x30 - intrrupt mask reg */
+ unsigned int pcr; /* 0x34 - power control reg */
+ unsigned int ccr; /* 0x38 - clock contorl reg */
+ unsigned int bwr; /* 0x3c - bus width reg */
+ unsigned int dwr; /* 0x40 - data window reg */
+#ifndef CONFIG_FTSDC010_SDIO
+ unsigned int feature; /* 0x44 - feature reg */
+ unsigned int rev; /* 0x48 - revision reg */
+#else
+ unsigned int mmc_intr_time; /* 0x44 - MMC int resp time reg */
+ unsigned int gpo; /* 0x48 - gerenal purpose output */
+ unsigned int reserved[8]; /* 0x50 - 0x68 reserved */
+ unsigned int sdio_ctrl1; /* 0x6c - SDIO control reg 1 */
+ unsigned int sdio_ctrl2; /* 0x70 - SDIO control reg 2 */
+ unsigned int sdio_status; /* 0x74 - SDIO status regi */
+ unsigned int reserved1[9]; /* 0x78 - 0x98 reserved */
+ unsigned int feature; /* 0x9c - feature reg */
+ unsigned int rev; /* 0xa0 - revision reg */
+#endif /* CONFIG_FTSDC010_SDIO */
+};
+
+struct mmc_host {
+ struct ftsdc010_mmc *reg;
+ unsigned int version; /* SDHCI spec. version */
+ unsigned int clock; /* Current clock (MHz) */
+ unsigned int fifo_len; /* bytes */
+ unsigned int last_opcode; /* Last OP Code */
+ unsigned int card_type; /* Card type */
+};
+
+/* functions */
+int ftsdc010_mmc_init(int dev_index);
+
+#endif /* __ASSEMBLY__ */
+
+/* global defines */
+#define FTSDC010_CMD_RETRY 0x100000
+#define FTSDC010_PIO_RETRY 100 /* pio retry times */
+#define FTSDC010_DELAY_UNIT 100 /* 100 us */
+
+/* define from Linux kernel - include/linux/mmc/card.h */
+#define MMC_TYPE_SDIO 2 /* SDIO card */
+
+/* define for mmc layer */
+#define MMC_DATA_BOTH_DIR (MMC_DATA_WRITE | MMC_DATA_READ)
+
+/* this part is strange */
+#define FTSDC010_SDIO_CTRL1_REG 0x0000006C
+#define FTSDC010_SDIO_CTRL2_REG 0x0000006C
+#define FTSDC010_SDIO_STATUS_REG 0x00000070
+
+/* 0x00 - command register */
+#define FTSDC010_CMD_IDX(x) (((x) & 0x3f) << 0)
+#define FTSDC010_CMD_NEED_RSP (1 << 6)
+#define FTSDC010_CMD_LONG_RSP (1 << 7)
+#define FTSDC010_CMD_APP_CMD (1 << 8)
+#define FTSDC010_CMD_CMD_EN (1 << 9)
+#define FTSDC010_CMD_SDC_RST (1 << 10)
+#define FTSDC010_CMD_MMC_INT_STOP (1 << 11)
+
+/* 0x18 - responded command register */
+#define FTSDC010_RSP_CMD_IDX(x) (((x) >> 0) & 0x3f)
+#define FTSDC010_RSP_CMD_APP (1 << 6)
+
+/* 0x1c - data control register */
+#define FTSDC010_DCR_BLK_SIZE(x) (((x) & 0xf) << 0)
+#define FTSDC010_DCR_DATA_WRITE (1 << 4)
+#define FTSDC010_DCR_DMA_EN (1 << 5)
+#define FTSDC010_DCR_DATA_EN (1 << 6)
+#ifdef CONFIG_FTSDC010_SDIO
+#define FTSDC010_DCR_FIFOTH (1 << 7)
+#define FTSDC010_DCR_DMA_TYPE(x) (((x) & 0x3) << 8)
+#define FTSDC010_DCR_FIFO_RST (1 << 10)
+#endif /* CONFIG_FTSDC010_SDIO */
+
+#define FTSDC010_DCR_DMA_TYPE_1 0x0 /* Single r/w */
+#define FTSDC010_DCR_DMA_TYPE_4 0x1 /* Burst 4 r/w */
+#define FTSDC010_DCR_DMA_TYPE_8 0x2 /* Burst 8 r/w */
+
+#define FTSDC010_DCR_BLK_BYTES(x) (ffs(x) - 1) /* 1B - 2048B */
+
+/* CPRM related define */
+#define FTSDC010_CPRM_DATA_CHANGE_ENDIAN_EN 0x000008
+#define FTSDC010_CPRM_DATA_SWAP_HL_EN 0x000010
+
+/* 0x28 - status register */
+#define FTSDC010_STATUS_RSP_CRC_FAIL (1 << 0)
+#define FTSDC010_STATUS_DATA_CRC_FAIL (1 << 1)
+#define FTSDC010_STATUS_RSP_TIMEOUT (1 << 2)
+#define FTSDC010_STATUS_DATA_TIMEOUT (1 << 3)
+#define FTSDC010_STATUS_RSP_CRC_OK (1 << 4)
+#define FTSDC010_STATUS_DATA_CRC_OK (1 << 5)
+#define FTSDC010_STATUS_CMD_SEND (1 << 6)
+#define FTSDC010_STATUS_DATA_END (1 << 7)
+#define FTSDC010_STATUS_FIFO_URUN (1 << 8)
+#define FTSDC010_STATUS_FIFO_ORUN (1 << 9)
+#define FTSDC010_STATUS_CARD_CHANGE (1 << 10)
+#define FTSDC010_STATUS_CARD_DETECT (1 << 11)
+#define FTSDC010_STATUS_WRITE_PROT (1 << 12)
+#ifdef CONFIG_FTSDC010_SDIO
+#define FTSDC010_STATUS_CP_READY (1 << 13) /* reserved ? */
+#define FTSDC010_STATUS_CP_BUF_READY (1 << 14) /* reserved ? */
+#define FTSDC010_STATUS_PLAIN_TEXT_READY (1 << 15) /* reserved ? */
+#define FTSDC010_STATUS_SDIO_IRPT (1 << 16) /* SDIO card intr */
+#define FTSDC010_STATUS_DATA0_STATUS (1 << 17)
+#endif /* CONFIG_FTSDC010_SDIO */
+
+/* 0x2c - clear register */
+#define FTSDC010_CLR_RSP_CRC_FAIL (1 << 0)
+#define FTSDC010_CLR_DATA_CRC_FAIL (1 << 1)
+#define FTSDC010_CLR_RSP_TIMEOUT (1 << 2)
+#define FTSDC010_CLR_DATA_TIMEOUT (1 << 3)
+#define FTSDC010_CLR_RSP_CRC_OK (1 << 4)
+#define FTSDC010_CLR_DATA_CRC_OK (1 << 5)
+#define FTSDC010_CLR_CMD_SEND (1 << 6)
+#define FTSDC010_CLR_DATA_END (1 << 7)
+#define FTSDC010_STATUS_FIFO_URUN (1 << 8) /* reserved ? */
+#define FTSDC010_STATUS_FIFO_ORUN (1 << 9) /* reserved ? */
+#define FTSDC010_CLR_CARD_CHANGE (1 << 10)
+#ifdef CONFIG_FTSDC010_SDIO
+#define FTSDC010_CLR_SDIO_IRPT (1 << 16)
+#endif /* CONFIG_FTSDC010_SDIO */
+
+/* 0x30 - interrupt mask register */
+#define FTSDC010_INT_MASK_RSP_CRC_FAIL (1 << 0)
+#define FTSDC010_INT_MASK_DATA_CRC_FAIL (1 << 1)
+#define FTSDC010_INT_MASK_RSP_TIMEOUT (1 << 2)
+#define FTSDC010_INT_MASK_DATA_TIMEOUT (1 << 3)
+#define FTSDC010_INT_MASK_RSP_CRC_OK (1 << 4)
+#define FTSDC010_INT_MASK_DATA_CRC_OK (1 << 5)
+#define FTSDC010_INT_MASK_CMD_SEND (1 << 6)
+#define FTSDC010_INT_MASK_DATA_END (1 << 7)
+#define FTSDC010_INT_MASK_FIFO_URUN (1 << 8)
+#define FTSDC010_INT_MASK_FIFO_ORUN (1 << 9)
+#define FTSDC010_INT_MASK_CARD_CHANGE (1 << 10)
+#ifdef CONFIG_FTSDC010_SDIO
+#define FTSDC010_INT_MASK_CP_READY (1 << 13)
+#define FTSDC010_INT_MASK_CP_BUF_READY (1 << 14)
+#define FTSDC010_INT_MASK_PLAIN_TEXT_READY (1 << 15)
+#define FTSDC010_INT_MASK_SDIO_IRPT (1 << 16)
+#define FTSDC010_STATUS_DATA0_STATUS (1 << 17)
+#endif /* CONFIG_FTSDC010_SDIO */
+
+/* ? */
+#define FTSDC010_CARD_INSERT 0x0
+#define FTSDC010_CARD_REMOVE FTSDC010_STATUS_REG_CARD_DETECT
+
+/* 0x34 - power control register */
+#define FTSDC010_PCR_POWER(x) (((x) & 0xf) << 0)
+#define FTSDC010_PCR_POWER_ON (1 << 4)
+
+/* 0x38 - clock control register */
+#define FTSDC010_CCR_CLK_DIV(x) (((x) & 0x7f) << 0)
+#define FTSDC010_CCR_CLK_SD (1 << 7) /* 0: MMC, 1: SD */
+#define FTSDC010_CCR_CLK_DIS (1 << 8)
+
+/* card type */
+#define FTSDC010_CARD_TYPE_SD FTSDC010_CLOCK_REG_CARD_TYPE
+#define FTSDC010_CARD_TYPE_MMC 0x0
+
+/* 0x3c - bus width register */
+#define FTSDC010_BWR_SINGLE_BUS (1 << 0)
+#define FTSDC010_BWR_WIDE_8_BUS (1 << 1)
+#define FTSDC010_BWR_WIDE_4_BUS (1 << 2)
+#define FTSDC010_BWR_WIDE_BUS_SUPPORT(x) (((x) >> 3) & 0x3)
+#define FTSDC010_BWR_CARD_DETECT (1 << 5)
+
+#define FTSDC010_BWR_1_BUS_SUPPORT 0x0
+#define FTSDC010_BWR_4_BUS_SUPPORT 0x1
+#define FTSDC010_BWR_8_BUS_SUPPORT 0x2
+
+/* 0x44 or 0x9c - feature register */
+#define FTSDC010_FEATURE_FIFO_DEPTH(x) (((x) >> 0) & 0xff)
+#define FTSDC010_FEATURE_CPRM_FUNCTION (1 << 8)
+
+#define FTSDC010_FIFO_DEPTH_4 0x04
+#define FTSDC010_FIFO_DEPTH_8 0x08
+#define FTSDC010_FIFO_DEPTH_16 0x10
+
+/* 0x48 or 0xa0 - revision register */
+#define FTSDC010_REV_REVISION(x) (((x) & 0xff) >> 0)
+#define FTSDC010_REV_MINOR(x) (((x) & 0xff00) >> 8)
+#define FTSDC010_REV_MAJOR(x) (((x) & 0xffff0000) >> 16)
+
+#ifdef CONFIG_FTSDC010_SDIO
+/* 0x44 - general purpose output */
+#define FTSDC010_GPO_PORT(x) (((x) & 0xf) << 0)
+
+/* 0x6c - sdio control register 1 */
+#define FTSDC010_SDIO_CTRL1_SDIO_BLK_SIZE(x) (((x) & 0xfff) << 0)
+#define FTSDC010_SDIO_CTRL1_SDIO_BLK_MODE (1 << 12)
+#define FTSDC010_SDIO_CTRL1_READ_WAIT_EN (1 << 13)
+#define FTSDC010_SDIO_CTRL1_SDIO_ENABLE (1 << 14)
+#define FTSDC010_SDIO_CTRL1_SDIO_BLK_NO(x) (((x) & 0x1ff) << 15)
+
+/* 0x70 - sdio control register 2 */
+#define FTSDC010_SDIO_CTRL2_SUSP_READ_WAIT (1 << 0)
+#define FTSDC010_SDIO_CTRL2_SUSP_CMD_ABORT (1 << 1)
+
+/* 0x74 - sdio status register */
+#define FTSDC010_SDIO_STATUS_SDIO_BLK_CNT(x) (((x) >> 0) & 0x1ffff)
+#define FTSDC010_SDIO_STATUS_FIFO_REMAIN_NO(x) (((x) >> 17) & 0xef)
+
+#endif /* CONFIG_FTSDC010_SDIO */
+
+#endif /* __FTSDC010_H */