Merge branch 'for-1.3.2'
diff --git a/.gitignore b/.gitignore
index cda275e..37f2c1d 100644
--- a/.gitignore
+++ b/.gitignore
@@ -10,6 +10,7 @@
*.orig
*.a
*.o
+*~
#
# Top-level generic files
diff --git a/Makefile b/Makefile
index b3a1d2f..5f2dea0 100644
--- a/Makefile
+++ b/Makefile
@@ -253,9 +253,7 @@
"post/board/$(BOARDDIR)/libpost$(BOARD).a"; fi)
LIBS += common/libcommon.a
LIBS += libfdt/libfdt.a
-ifeq ($(CONFIG_API),y)
LIBS += api/libapi.a
-endif
LIBS := $(addprefix $(obj),$(LIBS))
.PHONY : $(LIBS)
@@ -266,11 +264,8 @@
# The "tools" are needed early, so put this first
# Don't include stuff already done in $(LIBS)
SUBDIRS = tools \
- examples
-
-ifeq ($(CONFIG_API),y)
-SUBDIRS += api_examples
-endif
+ examples \
+ api_examples
.PHONY : $(SUBDIRS)
@@ -317,13 +312,13 @@
--start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \
-Map u-boot.map -o u-boot
-$(OBJS): $(obj)include/autoconf.mk
+$(OBJS): depend $(obj)include/autoconf.mk
$(MAKE) -C cpu/$(CPU) $(if $(REMOTE_BUILD),$@,$(notdir $@))
-$(LIBS): $(obj)include/autoconf.mk
+$(LIBS): depend $(obj)include/autoconf.mk
$(MAKE) -C $(dir $(subst $(obj),,$@))
-$(SUBDIRS): $(obj)include/autoconf.mk
+$(SUBDIRS): depend $(obj)include/autoconf.mk
$(MAKE) -C $@ all
$(NAND_SPL): $(VERSION_FILE) $(obj)include/autoconf.mk
@@ -2469,20 +2464,8 @@
versatilepb_config : unconfig
@board/versatile/split_by_variant.sh $@
-voiceblue_smallflash_config \
voiceblue_config: unconfig
- @mkdir -p $(obj)include
- @mkdir -p $(obj)board/voiceblue
- @if [ "$(findstring _smallflash_,$@)" ] ; then \
- $(XECHO) "... boot from lower flash bank" ; \
- echo "#define VOICEBLUE_SMALL_FLASH" >>$(obj)include/config.h ; \
- echo "VOICEBLUE_SMALL_FLASH=y" >$(obj)board/voiceblue/config.tmp ; \
- else \
- $(XECHO) "... boot from upper flash bank" ; \
- >$(obj)include/config.h ; \
- echo "VOICEBLUE_SMALL_FLASH=n" >$(obj)board/voiceblue/config.tmp ; \
- fi
- @$(MKCONFIG) -a voiceblue arm arm925t voiceblue
+ @$(MKCONFIG) $(@:_config=) arm arm925t voiceblue
cm4008_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t cm4008 NULL ks8695
diff --git a/api/Makefile b/api/Makefile
index 94de3dc..4216892 100644
--- a/api/Makefile
+++ b/api/Makefile
@@ -24,13 +24,12 @@
LIB = $(obj)libapi.a
-COBJS = api.o api_net.o api_storage.o api_platform-$(ARCH).o
+COBJS-$(CONFIG_API) += api.o api_net.o api_storage.o api_platform-$(ARCH).o
+COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
-all: $(LIB)
-
$(LIB): $(obj).depend $(OBJS)
$(AR) $(ARFLAGS) $@ $(OBJS)
diff --git a/api/api_storage.c b/api/api_storage.c
index 7cd4efb..7e63240 100644
--- a/api/api_storage.c
+++ b/api/api_storage.c
@@ -61,21 +61,21 @@
void dev_stor_init(void)
{
-#if (CONFIG_COMMANDS & CFG_CMD_IDE)
+#if defined(CONFIG_CMD_IDE)
specs[ENUM_IDE].max_dev = CFG_IDE_MAXDEVICE;
specs[ENUM_IDE].enum_started = 0;
specs[ENUM_IDE].enum_ended = 0;
specs[ENUM_IDE].type = DEV_TYP_STOR | DT_STOR_IDE;
specs[ENUM_IDE].name = "ide";
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_USB)
+#if defined(CONFIG_CMD_USB)
specs[ENUM_USB].max_dev = USB_MAX_STOR_DEV;
specs[ENUM_USB].enum_started = 0;
specs[ENUM_USB].enum_ended = 0;
specs[ENUM_USB].type = DEV_TYP_STOR | DT_STOR_USB;
specs[ENUM_USB].name = "usb";
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_SCSI)
+#if defined(CONFIG_CMD_SCSI)
specs[ENUM_SCSI].max_dev = CFG_SCSI_MAX_DEVICE;
specs[ENUM_SCSI].enum_started = 0;
specs[ENUM_SCSI].enum_ended = 0;
diff --git a/api_examples/Makefile b/api_examples/Makefile
index cb49a9e..5666f48 100644
--- a/api_examples/Makefile
+++ b/api_examples/Makefile
@@ -30,19 +30,25 @@
include $(TOPDIR)/config.mk
-ELF += demo
-BIN += demo.bin
+ELF-$(CONFIG_API) += demo
+BIN-$(CONFIG_API) += demo.bin
+ELF := $(ELF-y)
+BIN := $(BIN-y)
#CFLAGS += -v
-COBJS := $(ELF:=.o)
-SOBJS := crt0.o
+COBJS-$(CONFIG_API) += $(ELF:=.o)
+SOBJS-$(CONFIG_API) += crt0.o
ifeq ($(ARCH),ppc)
-SOBJS += ppcstring.o
+SOBJS-$(CONFIG_API) += ppcstring.o
endif
+COBJS := $(COBJS-y)
+SOBJS := $(SOBJS-y)
LIB = $(obj)libglue.a
-LIBCOBJS= glue.o crc32.o ctype.o string.o vsprintf.o libgenwrap.o
+LIBCOBJS-$(CONFIG_API) += glue.o crc32.o ctype.o string.o vsprintf.o \
+ libgenwrap.o
+LIBCOBJS := $(LIBCOBJS-y)
LIBOBJS = $(addprefix $(obj),$(SOBJS) $(LIBCOBJS))
@@ -55,7 +61,7 @@
CPPFLAGS += -I..
-all: $(obj).depend $(OBJS) $(LIB) $(BIN) $(ELF)
+all: $(obj).depend $(OBJS) $(LIB) $(ELF) $(BIN)
#########################################################################
$(LIB): $(obj).depend $(LIBOBJS)
diff --git a/api_examples/libgenwrap.c b/api_examples/libgenwrap.c
index df62633..2b62bad 100644
--- a/api_examples/libgenwrap.c
+++ b/api_examples/libgenwrap.c
@@ -84,7 +84,12 @@
ub_reset();
}
-void *malloc(size_t len)
+void *malloc (size_t len)
{
return NULL;
}
+
+void hang (void)
+{
+ while (1) ;
+}
diff --git a/board/BuS/EB+MCF-EV123/mii.c b/board/BuS/EB+MCF-EV123/mii.c
index ebd3ed9..3ea20a6 100644
--- a/board/BuS/EB+MCF-EV123/mii.c
+++ b/board/BuS/EB+MCF-EV123/mii.c
@@ -132,7 +132,7 @@
return (mii_reply & 0xffff); /* data read from phy */
}
-#endif /* CFG_DISCOVER_PHY || (CONFIG_COMMANDS & CONFIG_CMD_MII) */
+#endif /* CFG_DISCOVER_PHY || CONFIG_CMD_MII */
#if defined(CFG_DISCOVER_PHY)
int mii_discover_phy(struct eth_device *dev)
diff --git a/board/ads5121/ads5121.c b/board/ads5121/ads5121.c
index 1582c22..462f41d 100644
--- a/board/ads5121/ads5121.c
+++ b/board/ads5121/ads5121.c
@@ -126,24 +126,24 @@
im->mddrc.prioman_config2 = CFG_MDDRCGRP_PM_CFG2;
im->mddrc.hiprio_config = CFG_MDDRCGRP_HIPRIO_CFG;
im->mddrc.lut_table0_main_upper = CFG_MDDRCGRP_LUT0_MU;
- im->mddrc.lut_table1_main_upper = CFG_MDDRCGRP_LUT1_MU;
- im->mddrc.lut_table2_main_upper = CFG_MDDRCGRP_LUT2_MU;
- im->mddrc.lut_table3_main_upper = CFG_MDDRCGRP_LUT3_MU;
- im->mddrc.lut_table4_main_upper = CFG_MDDRCGRP_LUT4_MU;
im->mddrc.lut_table0_main_lower = CFG_MDDRCGRP_LUT0_ML;
+ im->mddrc.lut_table1_main_upper = CFG_MDDRCGRP_LUT1_MU;
im->mddrc.lut_table1_main_lower = CFG_MDDRCGRP_LUT1_ML;
+ im->mddrc.lut_table2_main_upper = CFG_MDDRCGRP_LUT2_MU;
im->mddrc.lut_table2_main_lower = CFG_MDDRCGRP_LUT2_ML;
+ im->mddrc.lut_table3_main_upper = CFG_MDDRCGRP_LUT3_MU;
im->mddrc.lut_table3_main_lower = CFG_MDDRCGRP_LUT3_ML;
+ im->mddrc.lut_table4_main_upper = CFG_MDDRCGRP_LUT4_MU;
im->mddrc.lut_table4_main_lower = CFG_MDDRCGRP_LUT4_ML;
im->mddrc.lut_table0_alternate_upper = CFG_MDDRCGRP_LUT0_AU;
- im->mddrc.lut_table1_alternate_upper = CFG_MDDRCGRP_LUT1_AU;
- im->mddrc.lut_table2_alternate_upper = CFG_MDDRCGRP_LUT2_AU;
- im->mddrc.lut_table3_alternate_upper = CFG_MDDRCGRP_LUT3_AU;
- im->mddrc.lut_table4_alternate_upper = CFG_MDDRCGRP_LUT4_AU;
im->mddrc.lut_table0_alternate_lower = CFG_MDDRCGRP_LUT0_AL;
+ im->mddrc.lut_table1_alternate_upper = CFG_MDDRCGRP_LUT1_AU;
im->mddrc.lut_table1_alternate_lower = CFG_MDDRCGRP_LUT1_AL;
+ im->mddrc.lut_table2_alternate_upper = CFG_MDDRCGRP_LUT2_AU;
im->mddrc.lut_table2_alternate_lower = CFG_MDDRCGRP_LUT2_AL;
+ im->mddrc.lut_table3_alternate_upper = CFG_MDDRCGRP_LUT3_AU;
im->mddrc.lut_table3_alternate_lower = CFG_MDDRCGRP_LUT3_AL;
+ im->mddrc.lut_table4_alternate_upper = CFG_MDDRCGRP_LUT4_AU;
im->mddrc.lut_table4_alternate_lower = CFG_MDDRCGRP_LUT4_AL;
/* Initialize MDDRC */
@@ -157,18 +157,26 @@
im->mddrc.ddr_command = CFG_MICRON_NOP;
im->mddrc.ddr_command = CFG_MICRON_PCHG_ALL;
+ im->mddrc.ddr_command = CFG_MICRON_NOP;
+ im->mddrc.ddr_command = CFG_MICRON_RFSH;
+ im->mddrc.ddr_command = CFG_MICRON_NOP;
+ im->mddrc.ddr_command = CFG_MICRON_RFSH;
+ im->mddrc.ddr_command = CFG_MICRON_NOP;
+ im->mddrc.ddr_command = CFG_MICRON_INIT_DEV_OP;
+ im->mddrc.ddr_command = CFG_MICRON_NOP;
+ im->mddrc.ddr_command = CFG_MICRON_EM2;
+ im->mddrc.ddr_command = CFG_MICRON_NOP;
+ im->mddrc.ddr_command = CFG_MICRON_PCHG_ALL;
im->mddrc.ddr_command = CFG_MICRON_EM2;
im->mddrc.ddr_command = CFG_MICRON_EM3;
im->mddrc.ddr_command = CFG_MICRON_EN_DLL;
- im->mddrc.ddr_command = CFG_MICRON_RST_DLL;
+ im->mddrc.ddr_command = CFG_MICRON_INIT_DEV_OP;
im->mddrc.ddr_command = CFG_MICRON_PCHG_ALL;
im->mddrc.ddr_command = CFG_MICRON_RFSH;
im->mddrc.ddr_command = CFG_MICRON_INIT_DEV_OP;
im->mddrc.ddr_command = CFG_MICRON_OCD_DEFAULT;
- im->mddrc.ddr_command = CFG_MICRON_OCD_EXIT;
-
- for (i = 0; i < 10; i++)
- im->mddrc.ddr_command = CFG_MICRON_NOP;
+ im->mddrc.ddr_command = CFG_MICRON_PCHG_ALL;
+ im->mddrc.ddr_command = CFG_MICRON_NOP;
/* Start MDDRC */
im->mddrc.ddr_time_config0 = CFG_MDDRC_TIME_CFG0_RUN;
diff --git a/board/cobra5272/mii.c b/board/cobra5272/mii.c
index fadcbb3..d0a4a39 100644
--- a/board/cobra5272/mii.c
+++ b/board/cobra5272/mii.c
@@ -131,7 +131,7 @@
return (mii_reply & 0xffff); /* data read from phy */
}
-#endif /* CFG_DISCOVER_PHY || (CONFIG_COMMANDS & CONFIG_CMD_MII) */
+#endif /* CFG_DISCOVER_PHY || CONFIG_CMD_MII */
#if defined(CFG_DISCOVER_PHY)
int mii_discover_phy(struct eth_device *dev)
diff --git a/board/idmr/mii.c b/board/idmr/mii.c
index f6c63c3..f130e6e 100644
--- a/board/idmr/mii.c
+++ b/board/idmr/mii.c
@@ -131,7 +131,7 @@
return (mii_reply & 0xffff); /* data read from phy */
}
-#endif /* CFG_DISCOVER_PHY || (CONFIG_COMMANDS & CONFIG_CMD_MII) */
+#endif /* CFG_DISCOVER_PHY || CONFIG_CMD_MII */
#if defined(CFG_DISCOVER_PHY)
int mii_discover_phy(struct eth_device *dev)
diff --git a/board/m5271evb/mii.c b/board/m5271evb/mii.c
index 3830ce7..78a7028 100644
--- a/board/m5271evb/mii.c
+++ b/board/m5271evb/mii.c
@@ -131,7 +131,7 @@
return (mii_reply & 0xffff); /* data read from phy */
}
-#endif /* CFG_DISCOVER_PHY || (CONFIG_COMMANDS & CONFIG_CMD_MII) */
+#endif /* CFG_DISCOVER_PHY || CONFIG_CMD_MII */
#if defined(CFG_DISCOVER_PHY)
int mii_discover_phy(struct eth_device *dev)
diff --git a/board/m5272c3/mii.c b/board/m5272c3/mii.c
index 0ecc44a..b30ba80 100644
--- a/board/m5272c3/mii.c
+++ b/board/m5272c3/mii.c
@@ -131,7 +131,7 @@
return (mii_reply & 0xffff); /* data read from phy */
}
-#endif /* CFG_DISCOVER_PHY || (CONFIG_COMMANDS & CONFIG_CMD_MII) */
+#endif /* CFG_DISCOVER_PHY || CONFIG_CMD_MII */
#if defined(CFG_DISCOVER_PHY)
int mii_discover_phy(struct eth_device *dev)
diff --git a/board/m5282evb/mii.c b/board/m5282evb/mii.c
index d7c6d1f..8ae2ec6 100644
--- a/board/m5282evb/mii.c
+++ b/board/m5282evb/mii.c
@@ -132,7 +132,7 @@
return (mii_reply & 0xffff); /* data read from phy */
}
-#endif /* CFG_DISCOVER_PHY || (CONFIG_COMMANDS & CONFIG_CMD_MII) */
+#endif /* CFG_DISCOVER_PHY || CONFIG_CMD_MII */
#if defined(CFG_DISCOVER_PHY)
int mii_discover_phy(struct eth_device *dev)
diff --git a/board/voiceblue/Makefile b/board/voiceblue/Makefile
index 5f340b4..9386bb0 100644
--- a/board/voiceblue/Makefile
+++ b/board/voiceblue/Makefile
@@ -62,7 +62,7 @@
distclean: clean
- rm -f $(LIB) core config.tmp *.bak .depend
+ rm -f $(LIB) core *.bak .depend
#########################################################################
diff --git a/board/voiceblue/config.mk b/board/voiceblue/config.mk
index d55daa4..2cfc56a 100644
--- a/board/voiceblue/config.mk
+++ b/board/voiceblue/config.mk
@@ -1,16 +1 @@
-#
-# Linux-Kernel is expected to be at 1000'8000,
-# entry 1000'8000 (mem base + reserved)
-#
-
-sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-
-ifeq ($(VOICEBLUE_SMALL_FLASH),y)
-# We load ourself to internal SRAM at 2001'2000
-# Check map file when changing TEXT_BASE.
-# Everything has fit into 192kB internal SRAM!
-TEXT_BASE = 0x20012000
-else
-# Running in SDRAM...
TEXT_BASE = 0x13FD0000
-endif
diff --git a/board/voiceblue/setup.S b/board/voiceblue/setup.S
index dcf37b5..78cd2b6 100644
--- a/board/voiceblue/setup.S
+++ b/board/voiceblue/setup.S
@@ -77,7 +77,7 @@
.word 0x00000000 @ FUNC_MUX_CTRL_3
.word 0x00000000 @ FUNC_MUX_CTRL_4
.word 0x12082480 @ FUNC_MUX_CTRL_5
- .word 0x00000004 @ FUNC_MUX_CTRL_6
+ .word 0x0000001c @ FUNC_MUX_CTRL_6
.word 0x00000003 @ FUNC_MUX_CTRL_7
.word 0x10001200 @ FUNC_MUX_CTRL_8
.word 0x01201012 @ FUNC_MUX_CTRL_9
diff --git a/board/xsengine/xsengine.c b/board/xsengine/xsengine.c
index 23d56c4..65923e9 100644
--- a/board/xsengine/xsengine.c
+++ b/board/xsengine/xsengine.c
@@ -47,7 +47,7 @@
return 0;
}
-int board_post_init (void)
+int board_late_init (void)
{
setenv ("stdout", "serial");
setenv ("stderr", "serial");
diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c
index c28a155..4e77461 100644
--- a/common/cmd_bdinfo.c
+++ b/common/cmd_bdinfo.c
@@ -316,6 +316,7 @@
print_num("-> size", bd->bi_dram[i].size);
}
+#if defined(CONFIG_CMD_NET)
puts ("ethaddr =");
for (i=0; i<6; ++i) {
printf ("%c%02X", i ? ':' : ' ', bd->bi_enetaddr[i]);
@@ -323,6 +324,7 @@
puts ( "\n"
"ip_addr = ");
print_IPaddr (bd->bi_ip_addr);
+#endif
printf ("\n"
"baudrate = %d bps\n", bd->bi_baudrate);
diff --git a/common/cmd_net.c b/common/cmd_net.c
index 56eb684..dbf6b86 100644
--- a/common/cmd_net.c
+++ b/common/cmd_net.c
@@ -51,7 +51,7 @@
U_BOOT_CMD(
tftpboot, 3, 1, do_tftpb,
"tftpboot- boot image via network using TFTP protocol\n",
- "[loadAddress] [bootfilename]\n"
+ "[loadAddress] [[hostIPaddr:]bootfilename]\n"
);
int do_rarpb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
diff --git a/common/fdt_support.c b/common/fdt_support.c
index a13c140..69eb667 100644
--- a/common/fdt_support.c
+++ b/common/fdt_support.c
@@ -30,9 +30,6 @@
#include <fdt_support.h>
#include <exports.h>
-#ifdef CONFIG_QE
-#include "../drivers/qe/qe.h"
-#endif
/*
* Global data (for the gd->bd)
*/
@@ -418,7 +415,7 @@
{
#if defined(DEBUG)
int i;
- debug("Updating property '%s/%s' = ", node, prop);
+ debug("Updating property '%s/%s' = ", path, prop);
for (i = 0; i < len; i++)
debug(" %.2x", *(u8*)(val+i));
debug("\n");
@@ -444,7 +441,7 @@
int off;
#if defined(DEBUG)
int i;
- debug("Updating property '%s/%s' = ", node, prop);
+ debug("Updating property '%s' = ", prop);
for (i = 0; i < len; i++)
debug(" %.2x", *(u8*)(val+i));
debug("\n");
@@ -471,7 +468,7 @@
int off = -1;
#if defined(DEBUG)
int i;
- debug("Updating property '%s/%s' = ", node, prop);
+ debug("Updating property '%s' = ", prop);
for (i = 0; i < len; i++)
debug(" %.2x", *(u8*)(val+i));
debug("\n");
@@ -617,49 +614,4 @@
#endif
}
}
-
-#ifdef CONFIG_QE
-/*
- * If a QE firmware has been uploaded, then add the 'firmware' node under
- * the 'qe' node.
- */
-void fdt_fixup_qe_firmware(void *fdt)
-{
- struct qe_firmware_info *qe_fw_info;
- int node, ret;
-
- qe_fw_info = qe_get_firmware_info();
- if (!qe_fw_info)
- return;
-
- node = fdt_path_offset(fdt, "/qe");
- if (node < 0)
- return;
-
- /* We assume the node doesn't exist yet */
- node = fdt_add_subnode(fdt, node, "firmware");
- if (node < 0)
- return;
-
- ret = fdt_setprop(fdt, node, "extended-modes",
- &qe_fw_info->extended_modes, sizeof(u64));
- if (ret < 0)
- goto error;
-
- ret = fdt_setprop_string(fdt, node, "id", qe_fw_info->id);
- if (ret < 0)
- goto error;
-
- ret = fdt_setprop(fdt, node, "virtual-traps", qe_fw_info->vtraps,
- sizeof(qe_fw_info->vtraps));
- if (ret < 0)
- goto error;
-
- return;
-
-error:
- fdt_del_node(fdt, node);
-}
-#endif
-
#endif
diff --git a/common/serial.c b/common/serial.c
index 5601080..bfda7ca 100644
--- a/common/serial.c
+++ b/common/serial.c
@@ -60,6 +60,16 @@
#else
return &serial0_device;
#endif
+#elif defined(CONFIG_S3C2410)
+#if defined(CONFIG_SERIAL1)
+ return &s3c24xx_serial0_device;
+#elif defined(CONFIG_SERIAL2)
+ return &s3c24xx_serial1_device;
+#elif defined(CONFIG_SERIAL3)
+ return &s3c24xx_serial2_device;
+#else
+#error "CONFIG_SERIAL? missing."
+#endif
#else
#error No default console
#endif
@@ -123,6 +133,11 @@
#if defined (CONFIG_STUART)
serial_register(&serial_stuart_device);
#endif
+#if defined(CONFIG_S3C2410)
+ serial_register(&s3c24xx_serial0_device);
+ serial_register(&s3c24xx_serial1_device);
+ serial_register(&s3c24xx_serial2_device);
+#endif
serial_assign (default_serial_console ()->name);
}
diff --git a/config.mk b/config.mk
index 79e5a31..bff95bd 100644
--- a/config.mk
+++ b/config.mk
@@ -147,7 +147,10 @@
gccincdir := $(shell $(CC) -print-file-name=include)
CPPFLAGS := $(DBGFLAGS) $(OPTFLAGS) $(RELFLAGS) \
- -D__KERNEL__ -DTEXT_BASE=$(TEXT_BASE) \
+ -D__KERNEL__
+ifneq ($(TEXT_BASE),)
+CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
+endif
ifneq ($(OBJTREE),$(SRCTREE))
CPPFLAGS += -I$(OBJTREE)/include2 -I$(OBJTREE)/include
@@ -185,7 +188,10 @@
AFLAGS := $(AFLAGS_DEBUG) -D__ASSEMBLY__ $(CPPFLAGS)
-LDFLAGS += -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS)
+LDFLAGS += -Bstatic -T $(LDSCRIPT) $(PLATFORM_LDFLAGS)
+ifneq ($(TEXT_BASE),)
+LDFLAGS += -Ttext $(TEXT_BASE)
+endif
# Location of a usable BFD library, where we define "usable" as
# "built for ${HOST}, supports ${TARGET}". Sensible values are
diff --git a/cpu/arm920t/interrupts.c b/cpu/arm920t/interrupts.c
index a43a3ed..0a6d94f 100644
--- a/cpu/arm920t/interrupts.c
+++ b/cpu/arm920t/interrupts.c
@@ -161,11 +161,16 @@
void do_irq (struct pt_regs *pt_regs)
{
-#if defined (CONFIG_USE_IRQ) && defined (CONFIG_ARCH_INTEGRATOR)
+#if defined (CONFIG_USE_IRQ)
+#if defined (ARM920_IRQ_CALLBACK)
+ ARM920_IRQ_CALLBACK();
+ return;
+#elif defined (CONFIG_ARCH_INTEGRATOR)
/* ASSUMED to be a timer interrupt */
/* Just clear it - count handled in */
/* integratorap.c */
*(volatile ulong *)(CFG_TIMERBASE + 0x0C) = 0;
+#endif /* ARCH_INTEGRATOR */
#else
printf ("interrupt request\n");
show_regs (pt_regs);
diff --git a/cpu/arm920t/s3c24x0/Makefile b/cpu/arm920t/s3c24x0/Makefile
index 1ed9bf3..6764920 100644
--- a/cpu/arm920t/s3c24x0/Makefile
+++ b/cpu/arm920t/s3c24x0/Makefile
@@ -26,7 +26,7 @@
LIB = $(obj)lib$(SOC).a
COBJS = i2c.o interrupts.o serial.o speed.o \
- usb.o usb_ohci.o
+ usb.o usb_ohci.o nand.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/cpu/arm920t/s3c24x0/interrupts.c b/cpu/arm920t/s3c24x0/interrupts.c
index 1b36412..7ad9fcb 100644
--- a/cpu/arm920t/s3c24x0/interrupts.c
+++ b/cpu/arm920t/s3c24x0/interrupts.c
@@ -216,4 +216,13 @@
/*NOTREACHED*/
}
+#ifdef CONFIG_USE_IRQ
+void s3c2410_irq(void)
+{
+ S3C24X0_INTERRUPT * irq = S3C24X0_GetBase_INTERRUPT();
+ u_int32_t intpnd = irq->INTPND;
+
+}
+#endif /* USE_IRQ */
+
#endif /* defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB) */
diff --git a/cpu/arm920t/s3c24x0/nand.c b/cpu/arm920t/s3c24x0/nand.c
new file mode 100644
index 0000000..e1bf128
--- /dev/null
+++ b/cpu/arm920t/s3c24x0/nand.c
@@ -0,0 +1,179 @@
+/*
+ * (C) Copyright 2006 OpenMoko, Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if 0
+#define DEBUGN printf
+#else
+#define DEBUGN(x, args ...) {}
+#endif
+
+#if defined(CONFIG_CMD_NAND)
+#if !defined(CFG_NAND_LEGACY)
+
+#include <nand.h>
+#include <s3c2410.h>
+
+#define __REGb(x) (*(volatile unsigned char *)(x))
+#define __REGi(x) (*(volatile unsigned int *)(x))
+
+#define NF_BASE 0x4e000000
+#define NFCONF __REGi(NF_BASE + 0x0)
+#define NFCMD __REGb(NF_BASE + 0x4)
+#define NFADDR __REGb(NF_BASE + 0x8)
+#define NFDATA __REGb(NF_BASE + 0xc)
+#define NFSTAT __REGb(NF_BASE + 0x10)
+#define NFECC0 __REGb(NF_BASE + 0x14)
+#define NFECC1 __REGb(NF_BASE + 0x15)
+#define NFECC2 __REGb(NF_BASE + 0x16)
+
+#define S3C2410_NFCONF_EN (1<<15)
+#define S3C2410_NFCONF_512BYTE (1<<14)
+#define S3C2410_NFCONF_4STEP (1<<13)
+#define S3C2410_NFCONF_INITECC (1<<12)
+#define S3C2410_NFCONF_nFCE (1<<11)
+#define S3C2410_NFCONF_TACLS(x) ((x)<<8)
+#define S3C2410_NFCONF_TWRPH0(x) ((x)<<4)
+#define S3C2410_NFCONF_TWRPH1(x) ((x)<<0)
+
+static void s3c2410_hwcontrol(struct mtd_info *mtd, int cmd)
+{
+ struct nand_chip *chip = mtd->priv;
+
+ DEBUGN("hwcontrol(): 0x%02x: ", cmd);
+
+ switch (cmd) {
+ case NAND_CTL_SETNCE:
+ NFCONF &= ~S3C2410_NFCONF_nFCE;
+ DEBUGN("NFCONF=0x%08x\n", NFCONF);
+ break;
+ case NAND_CTL_CLRNCE:
+ NFCONF |= S3C2410_NFCONF_nFCE;
+ DEBUGN("NFCONF=0x%08x\n", NFCONF);
+ break;
+ case NAND_CTL_SETALE:
+ chip->IO_ADDR_W = NF_BASE + 0x8;
+ DEBUGN("SETALE\n");
+ break;
+ case NAND_CTL_SETCLE:
+ chip->IO_ADDR_W = NF_BASE + 0x4;
+ DEBUGN("SETCLE\n");
+ break;
+ default:
+ chip->IO_ADDR_W = NF_BASE + 0xc;
+ break;
+ }
+ return;
+}
+
+static int s3c2410_dev_ready(struct mtd_info *mtd)
+{
+ DEBUGN("dev_ready\n");
+ return (NFSTAT & 0x01);
+}
+
+#ifdef CONFIG_S3C2410_NAND_HWECC
+void s3c2410_nand_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+ DEBUGN("s3c2410_nand_enable_hwecc(%p, %d)\n", mtd ,mode);
+ NFCONF |= S3C2410_NFCONF_INITECC;
+}
+
+static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
+ u_char *ecc_code)
+{
+ ecc_code[0] = NFECC0;
+ ecc_code[1] = NFECC1;
+ ecc_code[2] = NFECC2;
+ DEBUGN("s3c2410_nand_calculate_hwecc(%p,): 0x%02x 0x%02x 0x%02x\n",
+ mtd , ecc_code[0], ecc_code[1], ecc_code[2]);
+
+ return 0;
+}
+
+static int s3c2410_nand_correct_data(struct mtd_info *mtd, u_char *dat,
+ u_char *read_ecc, u_char *calc_ecc)
+{
+ if (read_ecc[0] == calc_ecc[0] &&
+ read_ecc[1] == calc_ecc[1] &&
+ read_ecc[2] == calc_ecc[2])
+ return 0;
+
+ printf("s3c2410_nand_correct_data: not implemented\n");
+ return -1;
+}
+#endif
+
+int board_nand_init(struct nand_chip *nand)
+{
+ u_int32_t cfg;
+ u_int8_t tacls, twrph0, twrph1;
+ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
+
+ DEBUGN("board_nand_init()\n");
+
+ clk_power->CLKCON |= (1 << 4);
+
+ /* initialize hardware */
+ twrph0 = 3; twrph1 = 0; tacls = 0;
+
+ cfg = S3C2410_NFCONF_EN;
+ cfg |= S3C2410_NFCONF_TACLS(tacls - 1);
+ cfg |= S3C2410_NFCONF_TWRPH0(twrph0 - 1);
+ cfg |= S3C2410_NFCONF_TWRPH1(twrph1 - 1);
+
+ NFCONF = cfg;
+
+ /* initialize nand_chip data structure */
+ nand->IO_ADDR_R = nand->IO_ADDR_W = 0x4e00000c;
+
+ /* read_buf and write_buf are default */
+ /* read_byte and write_byte are default */
+
+ /* hwcontrol always must be implemented */
+ nand->hwcontrol = s3c2410_hwcontrol;
+
+ nand->dev_ready = s3c2410_dev_ready;
+
+#ifdef CONFIG_S3C2410_NAND_HWECC
+ nand->enable_hwecc = s3c2410_nand_enable_hwecc;
+ nand->calculate_ecc = s3c2410_nand_calculate_ecc;
+ nand->correct_data = s3c2410_nand_correct_data;
+ nand->eccmode = NAND_ECC_HW3_512;
+#else
+ nand->eccmode = NAND_ECC_SOFT;
+#endif
+
+#ifdef CONFIG_S3C2410_NAND_BBT
+ nand->options = NAND_USE_FLASH_BBT;
+#else
+ nand->options = 0;
+#endif
+
+ DEBUGN("end of nand_init\n");
+
+ return 0;
+}
+
+#else
+ #error "U-Boot legacy NAND support not available for S3C2410"
+#endif
+#endif
diff --git a/cpu/arm920t/s3c24x0/serial.c b/cpu/arm920t/s3c24x0/serial.c
index 36851ad..6e853b8 100644
--- a/cpu/arm920t/s3c24x0/serial.c
+++ b/cpu/arm920t/s3c24x0/serial.c
@@ -48,18 +48,74 @@
#error "Bad: you didn't configure serial ..."
#endif
-void serial_setbrg (void)
+#if defined(CONFIG_SERIAL_MULTI)
+#include <serial.h>
+
+/* Multi serial device functions */
+#define DECLARE_S3C_SERIAL_FUNCTIONS(port) \
+ int s3serial##port##_init (void) {\
+ return serial_init_dev(port);}\
+ void s3serial##port##_setbrg (void) {\
+ serial_setbrg_dev(port);}\
+ int s3serial##port##_getc (void) {\
+ return serial_getc_dev(port);}\
+ int s3serial##port##_tstc (void) {\
+ return serial_tstc_dev(port);}\
+ void s3serial##port##_putc (const char c) {\
+ serial_putc_dev(port, c);}\
+ void s3serial##port##_puts (const char *s) {\
+ serial_puts_dev(port, s);}
+
+#define INIT_S3C_SERIAL_STRUCTURE(port,name,bus) {\
+ name,\
+ bus,\
+ s3serial##port##_init,\
+ s3serial##port##_setbrg,\
+ s3serial##port##_getc,\
+ s3serial##port##_tstc,\
+ s3serial##port##_putc,\
+ s3serial##port##_puts, }
+
+#endif /* CONFIG_SERIAL_MULTI */
+
+void _serial_setbrg(const int dev_index)
{
- S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR);
- int i;
+ S3C24X0_UART * const uart = S3C24X0_GetBase_UART(dev_index);
unsigned int reg = 0;
+ int i;
/* value is calculated so : (int)(PCLK/16./baudrate) -1 */
reg = get_PCLK() / (16 * gd->baudrate) - 1;
+ uart->UBRDIV = reg;
+ for (i = 0; i < 100; i++);
+}
+#if defined(CONFIG_SERIAL_MULTI)
+static inline void
+serial_setbrg_dev(unsigned int dev_index)
+{
+ _serial_setbrg(dev_index);
+}
+#else
+void serial_setbrg(void)
+{
+ _serial_setbrg(UART_NR);
+}
+#endif
+
+
+/* Initialise the serial port. The settings are always 8 data bits, no parity,
+ * 1 stop bit, no start bits.
+ */
+static int serial_init_dev(const int dev_index)
+{
+ S3C24X0_UART * const uart = S3C24X0_GetBase_UART(dev_index);
+ int i;
+
/* FIFO enable, Tx/Rx FIFO clear */
uart->UFCON = 0x07;
uart->UMCON = 0x0;
+
/* Normal,No parity,1 stop,8 bit */
uart->ULCON = 0x3;
/*
@@ -67,40 +123,57 @@
* normal,interrupt or polling
*/
uart->UCON = 0x245;
- uart->UBRDIV = reg;
#ifdef CONFIG_HWFLOW
uart->UMCON = 0x1; /* RTS up */
#endif
- for (i = 0; i < 100; i++);
-}
-/*
- * Initialise the serial port with the given baudrate. The settings
- * are always 8 data bits, no parity, 1 stop bit, no start bits.
- *
- */
-int serial_init (void)
-{
- serial_setbrg ();
+ /* FIXME: This is sooooooooooooooooooo ugly */
+#if defined(CONFIG_ARCH_GTA02_v1) || defined(CONFIG_ARCH_GTA02_v2)
+ /* we need auto hw flow control on the gsm and gps port */
+ if (dev_index == 0 || dev_index == 1)
+ uart->UMCON = 0x10;
+#endif
+ _serial_setbrg(dev_index);
return (0);
}
+#if !defined(CONFIG_SERIAL_MULTI)
+/* Initialise the serial port. The settings are always 8 data bits, no parity,
+ * 1 stop bit, no start bits.
+ */
+int serial_init (void)
+{
+ return serial_init_dev(UART_NR);
+}
+#endif
+
/*
* Read a single byte from the serial port. Returns 1 on success, 0
* otherwise. When the function is succesfull, the character read is
* written into its argument c.
*/
-int serial_getc (void)
+int _serial_getc (const int dev_index)
{
- S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR);
+ S3C24X0_UART * const uart = S3C24X0_GetBase_UART(dev_index);
/* wait for character to arrive */
while (!(uart->UTRSTAT & 0x1));
return uart->URXH & 0xff;
}
+#if defined(CONFIG_SERIAL_MULTI)
+static inline int serial_getc_dev(unsigned int dev_index)
+{
+ return _serial_getc(dev_index);
+}
+#else
+int serial_getc (void)
+{
+ return _serial_getc(UART_NR);
+}
+#endif
#ifdef CONFIG_HWFLOW
static int hwflow = 0; /* turned off by default */
@@ -138,9 +211,9 @@
/*
* Output a single byte to the serial port.
*/
-void serial_putc (const char c)
+void _serial_putc (const char c, const int dev_index)
{
- S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR);
+ S3C24X0_UART * const uart = S3C24X0_GetBase_UART(dev_index);
#ifdef CONFIG_MODEM_SUPPORT
if (be_quiet)
return;
@@ -161,23 +234,72 @@
if (c == '\n')
serial_putc ('\r');
}
+#if defined(CONFIG_SERIAL_MULTI)
+static inline void serial_putc_dev(unsigned int dev_index, const char c)
+{
+ _serial_putc(c, dev_index);
+}
+#else
+void serial_putc(const char c)
+{
+ _serial_putc(c, UART_NR);
+}
+#endif
+
/*
* Test whether a character is in the RX buffer
*/
-int serial_tstc (void)
+int _serial_tstc(const int dev_index)
{
- S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR);
+ S3C24X0_UART * const uart = S3C24X0_GetBase_UART(dev_index);
return uart->UTRSTAT & 0x1;
}
+#if defined(CONFIG_SERIAL_MULTI)
+static inline int
+serial_tstc_dev(unsigned int dev_index)
+{
+ return _serial_tstc(dev_index);
+}
+#else
+int serial_tstc(void)
+{
+ return _serial_tstc(UART_NR);
+}
+#endif
+void _serial_puts(const char *s, const int dev_index)
+{
+ while (*s) {
+ _serial_putc (*s++, dev_index);
+ }
+}
+#if defined(CONFIG_SERIAL_MULTI)
+static inline void
+serial_puts_dev(int dev_index, const char *s)
+{
+ _serial_puts(s, dev_index);
+}
+#else
void
serial_puts (const char *s)
{
- while (*s) {
- serial_putc (*s++);
- }
+ _serial_puts(s, UART_NR);
}
+#endif
+
+#if defined(CONFIG_SERIAL_MULTI)
+DECLARE_S3C_SERIAL_FUNCTIONS(0);
+struct serial_device s3c24xx_serial0_device =
+ INIT_S3C_SERIAL_STRUCTURE(0, "s3ser0", "S3UART1");
+DECLARE_S3C_SERIAL_FUNCTIONS(1);
+struct serial_device s3c24xx_serial1_device =
+ INIT_S3C_SERIAL_STRUCTURE(1, "s3ser1", "S3UART2");
+DECLARE_S3C_SERIAL_FUNCTIONS(2);
+struct serial_device s3c24xx_serial2_device =
+ INIT_S3C_SERIAL_STRUCTURE(2, "s3ser2", "S3UART3");
+
+#endif /* CONFIG_SERIAL_MULTI */
#endif /* defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB) */
diff --git a/cpu/arm920t/start.S b/cpu/arm920t/start.S
index aefcdd1..ae86002 100644
--- a/cpu/arm920t/start.S
+++ b/cpu/arm920t/start.S
@@ -329,12 +329,12 @@
.macro irq_save_user_regs
sub sp, sp, #S_FRAME_SIZE
stmia sp, {r0 - r12} @ Calling r0-r12
- add r8, sp, #S_PC
- stmdb r8, {sp, lr}^ @ Calling SP, LR
- str lr, [r8, #0] @ Save calling PC
+ add r7, sp, #S_PC
+ stmdb r7, {sp, lr}^ @ Calling SP, LR
+ str lr, [r7, #0] @ Save calling PC
mrs r6, spsr
- str r6, [r8, #4] @ Save CPSR
- str r0, [r8, #8] @ Save OLD_R0
+ str r6, [r7, #4] @ Save CPSR
+ str r0, [r7, #8] @ Save OLD_R0
mov r0, sp
.endm
diff --git a/cpu/arm926ejs/cpuinfo.c b/cpu/arm926ejs/cpuinfo.c
index 8c98631..35ba7db 100644
--- a/cpu/arm926ejs/cpuinfo.c
+++ b/cpu/arm926ejs/cpuinfo.c
@@ -18,8 +18,6 @@
#define omap_readw(x) *(volatile unsigned short *)(x)
#define omap_readl(x) *(volatile unsigned long *)(x)
-#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
-
#define OMAP_DIE_ID_0 0xfffe1800
#define OMAP_DIE_ID_1 0xfffe1804
#define OMAP_PRODUCTION_ID_0 0xfffe2000
diff --git a/cpu/mpc512x/cpu.c b/cpu/mpc512x/cpu.c
index 6421a51..bed77ac 100644
--- a/cpu/mpc512x/cpu.c
+++ b/cpu/mpc512x/cpu.c
@@ -138,11 +138,11 @@
do_fixup_by_path_u32(blob, cpu_path, "timebase-frequency", OF_TBCLK, 1);
do_fixup_by_path_u32(blob, cpu_path, "bus-frequency", bd->bi_busfreq, 1);
- do_fixup_by_path_u32(blob, cpu_path, "ref-frequency", CFG_MPC512X_CLKIN, 1);
do_fixup_by_path_u32(blob, cpu_path, "clock-frequency", bd->bi_intfreq, 1);
do_fixup_by_path_u32(blob, "/" OF_SOC, "bus-frequency", bd->bi_ipsfreq, 1);
- do_fixup_by_path_u32(blob, "/" OF_SOC, "ref-frequency", CFG_MPC512X_CLKIN, 1);
- do_fixup_by_path(blob, eth_path, "address", bd->bi_enetaddr, 6, 0);
do_fixup_by_path(blob, eth_path, "local-mac-address", bd->bi_enetaddr, 6, 0);
+
+ /* this is so old kernels with old device trees will boot */
+ do_fixup_by_path_u32(blob, "/" OF_SOC_OLD, "bus-frequency", bd->bi_ipsfreq, 0);
}
#endif
diff --git a/cpu/mpc83xx/fdt.c b/cpu/mpc83xx/fdt.c
index 909171f..6f55932 100644
--- a/cpu/mpc83xx/fdt.c
+++ b/cpu/mpc83xx/fdt.c
@@ -30,6 +30,8 @@
#include <libfdt.h>
#include <fdt_support.h>
+extern void ft_qe_setup(void *blob);
+
DECLARE_GLOBAL_DATA_PTR;
void ft_cpu_setup(void *blob, bd_t *bd)
@@ -48,16 +50,7 @@
do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
"bus-frequency", bd->bi_busfreq, 1);
#ifdef CONFIG_QE
- do_fixup_by_prop_u32(blob, "device_type", "qe", 4,
- "bus-frequency", gd->qe_clk, 1);
- do_fixup_by_prop_u32(blob, "device_type", "qe", 4,
- "brg-frequency", gd->brg_clk, 1);
- do_fixup_by_compat_u32(blob, "fsl,qe",
- "clock-frequency", gd->qe_clk, 1);
- do_fixup_by_compat_u32(blob, "fsl,qe",
- "bus-frequency", gd->qe_clk, 1);
- do_fixup_by_compat_u32(blob, "fsl,qe",
- "brg-frequency", gd->brg_clk, 1);
+ ft_qe_setup(blob);
#endif
#ifdef CFG_NS16550
diff --git a/cpu/mpc85xx/fdt.c b/cpu/mpc85xx/fdt.c
index 0ce17e7..a6b014c 100644
--- a/cpu/mpc85xx/fdt.c
+++ b/cpu/mpc85xx/fdt.c
@@ -27,6 +27,8 @@
#include <libfdt.h>
#include <fdt_support.h>
+extern void ft_qe_setup(void *blob);
+
void ft_cpu_setup(void *blob, bd_t *bd)
{
#if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) ||\
@@ -43,11 +45,7 @@
do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
"bus-frequency", bd->bi_busfreq, 1);
#ifdef CONFIG_QE
- do_fixup_by_prop_u32(blob, "device_type", "qe", 4,
- "bus-frequency", bd->bi_busfreq, 1);
- do_fixup_by_prop_u32(blob, "device_type", "qe", 4,
- "brg-frequency", bd->bi_busfreq / 2, 1);
- fdt_fixup_qe_firmware(blob);
+ ft_qe_setup(blob);
#endif
#ifdef CFG_NS16550
diff --git a/drivers/mtd/dataflash.c b/drivers/mtd/dataflash.c
index 91903c8..3ebb706 100644
--- a/drivers/mtd/dataflash.c
+++ b/drivers/mtd/dataflash.c
@@ -304,7 +304,7 @@
for (i = 0; i < CFG_MAX_DATAFLASH_BANKS; i++)
if ( dataflash_info[i].id
- && ((((int) addr) & 0xFF000000) ==
+ && ((((int) *addr) & 0xFF000000) ==
dataflash_info[i].logical_address)) {
addr_valid = 1;
break;
diff --git a/drivers/mtd/jedec_flash.c b/drivers/mtd/jedec_flash.c
index 94e87cb..41aad3b 100644
--- a/drivers/mtd/jedec_flash.c
+++ b/drivers/mtd/jedec_flash.c
@@ -218,10 +218,6 @@
#endif
};
-
-#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
-
-
static inline void fill_info(flash_info_t *info, const struct amd_flash_info *jedec_entry, ulong base)
{
int i,j;
diff --git a/drivers/net/cs8900.c b/drivers/net/cs8900.c
index 80c4ba2..55ef346 100644
--- a/drivers/net/cs8900.c
+++ b/drivers/net/cs8900.c
@@ -165,7 +165,7 @@
addr[0], addr[1],
addr[2], addr[3],
addr[4], addr[5]) ;
- debug ("### Set environment from HW MAC addr = \"%s\"\n", ethaddr);
+ debug ("### Set environment from HW MAC addr = \"%s\"\n", ethaddr);
setenv ("ethaddr", ethaddr);
}
@@ -317,6 +317,6 @@
return 0;
}
-#endif /* COMMANDS & CFG_NET */
+#endif /* CONFIG_CMD_NET */
#endif /* CONFIG_DRIVER_CS8900 */
diff --git a/drivers/net/lan91c96.c b/drivers/net/lan91c96.c
index ecdcbd9..51cfb7e 100644
--- a/drivers/net/lan91c96.c
+++ b/drivers/net/lan91c96.c
@@ -36,12 +36,12 @@
* AUI/TP selection ( mine has 10Base2/10BaseT select )
*
* Arguments:
- * io = for the base address
+ * io = for the base address
* irq = for the IRQ
*
* author:
- * Erik Stahlman ( erik@vt.edu )
- * Daris A Nevil ( dnevil@snmc.com )
+ * Erik Stahlman ( erik@vt.edu )
+ * Daris A Nevil ( dnevil@snmc.com )
*
*
* Hardware multicast code from Peter Cammaert ( pc@denkart.be )
@@ -53,7 +53,7 @@
* o lan91c96.c (Intel Diagnostic Manager driver)
*
* History:
- * 04/30/03 Mathijs Haarman Modified smc91111.c (u-boot version)
+ * 04/30/03 Mathijs Haarman Modified smc91111.c (u-boot version)
* for lan91c96
*---------------------------------------------------------------------------
*/
@@ -296,8 +296,8 @@
/*
* Function: smc_reset( void )
* Purpose:
- * This sets the SMC91111 chip to its normal state, hopefully from whatever
- * mess that any other DOS driver has put it in.
+ * This sets the SMC91111 chip to its normal state, hopefully from whatever
+ * mess that any other DOS driver has put it in.
*
* Maybe I should reset more registers to defaults in here? SOFTRST should
* do that for me.
@@ -397,7 +397,7 @@
* This sends the actual packet to the SMC9xxx chip.
*
* Algorithm:
- * First, see if a saved_skb is available.
+ * First, see if a saved_skb is available.
* ( this should NOT be called if there is no 'saved_skb'
* Now, find the packet number that the chip allocated
* Point the data pointers at it in memory
@@ -405,9 +405,9 @@
* Dump the packet to chip memory
* Check if a last byte is needed ( odd length packet )
* if so, set the control flag right
- * Tell the card to send it
+ * Tell the card to send it
* Enable the transmit interrupt, so I know if it failed
- * Free the kernel data if I actually sent it.
+ * Free the kernel data if I actually sent it.
*/
static int smc_send_packet (volatile void *packet, int packet_length)
{
@@ -865,7 +865,7 @@
}
#endif /* 0 */
-#endif /* COMMANDS & CFG_NET */
+#endif /* CONFIG_CMD_NET */
/* smc_get_ethaddr (bd_t * bd)
diff --git a/drivers/net/netarm_eth.c b/drivers/net/netarm_eth.c
index a99ee5d..ecf45dc 100644
--- a/drivers/net/netarm_eth.c
+++ b/drivers/net/netarm_eth.c
@@ -29,7 +29,6 @@
#include "netarm_eth.h"
#include <asm/arch/netarm_registers.h>
-
#if defined(CONFIG_CMD_NET)
static int na_mii_poll_busy (void);
@@ -56,7 +55,6 @@
setenv ("ethaddr", ethaddr);
}
-
static void na_mii_write (int reg, int value)
{
int mii_addr;
@@ -355,6 +353,6 @@
return 1;
}
-#endif /* COMMANDS & CFG_NET */
+#endif /* CONFIG_CMD_NET */
#endif /* CONFIG_DRIVER_NETARMETH */
diff --git a/drivers/net/rtl8019.c b/drivers/net/rtl8019.c
index 409a69f..9d62cab 100644
--- a/drivers/net/rtl8019.c
+++ b/drivers/net/rtl8019.c
@@ -36,16 +36,13 @@
#if defined(CONFIG_CMD_NET)
-
/* packet page register access functions */
-
static unsigned char get_reg (unsigned int regno)
{
return (*(unsigned char *) regno);
}
-
static void put_reg (unsigned int regno, unsigned char val)
{
*(volatile unsigned char *) regno = val;
@@ -91,7 +88,6 @@
put_reg (RTL8019_COMMAND, RTL8019_PAGE0);
}
-
void eth_halt (void)
{
put_reg (RTL8019_COMMAND, 0x01);
@@ -134,7 +130,6 @@
return 0;
}
-
static unsigned char nic_to_pc (void)
{
unsigned char rec_head_status;
@@ -277,6 +272,6 @@
return 0;
}
-#endif /* COMMANDS & CFG_NET */
+#endif /* CONFIG_CMD_NET */
#endif /* CONFIG_DRIVER_RTL8019 */
diff --git a/drivers/net/rtl8169.c b/drivers/net/rtl8169.c
index 57ccbd9..d71323f 100644
--- a/drivers/net/rtl8169.c
+++ b/drivers/net/rtl8169.c
@@ -352,8 +352,6 @@
return value;
}
-#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
-
static int rtl8169_init_board(struct eth_device *dev)
{
int i;
diff --git a/drivers/qe/Makefile b/drivers/qe/Makefile
index 4844181..ec5aa73 100644
--- a/drivers/qe/Makefile
+++ b/drivers/qe/Makefile
@@ -24,7 +24,8 @@
LIB := $(obj)qe.a
-COBJS := qe.o uccf.o uec.o uec_phy.o
+COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
+COBJS := qe.o uccf.o uec.o uec_phy.o $(COBJS-y)
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/drivers/qe/fdt.c b/drivers/qe/fdt.c
new file mode 100644
index 0000000..5307488
--- /dev/null
+++ b/drivers/qe/fdt.c
@@ -0,0 +1,90 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include "qe.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * If a QE firmware has been uploaded, then add the 'firmware' node under
+ * the 'qe' node.
+ */
+void fdt_fixup_qe_firmware(void *blob)
+{
+ struct qe_firmware_info *qe_fw_info;
+ int node, ret;
+
+ qe_fw_info = qe_get_firmware_info();
+ if (!qe_fw_info)
+ return;
+
+ node = fdt_path_offset(blob, "/qe");
+ if (node < 0)
+ return;
+
+ /* We assume the node doesn't exist yet */
+ node = fdt_add_subnode(blob, node, "firmware");
+ if (node < 0)
+ return;
+
+ ret = fdt_setprop(blob, node, "extended-modes",
+ &qe_fw_info->extended_modes, sizeof(u64));
+ if (ret < 0)
+ goto error;
+
+ ret = fdt_setprop_string(blob, node, "id", qe_fw_info->id);
+ if (ret < 0)
+ goto error;
+
+ ret = fdt_setprop(blob, node, "virtual-traps", qe_fw_info->vtraps,
+ sizeof(qe_fw_info->vtraps));
+ if (ret < 0)
+ goto error;
+
+ return;
+
+error:
+ fdt_del_node(blob, node);
+}
+
+void ft_qe_setup(void *blob)
+{
+#ifdef CONFIG_QE
+ do_fixup_by_prop_u32(blob, "device_type", "qe", 4,
+ "bus-frequency", gd->qe_clk, 1);
+ do_fixup_by_prop_u32(blob, "device_type", "qe", 4,
+ "brg-frequency", gd->brg_clk, 1);
+ do_fixup_by_compat_u32(blob, "fsl,qe",
+ "clock-frequency", gd->qe_clk, 1);
+ do_fixup_by_compat_u32(blob, "fsl,qe",
+ "bus-frequency", gd->qe_clk, 1);
+ do_fixup_by_compat_u32(blob, "fsl,qe",
+ "brg-frequency", gd->brg_clk, 1);
+ fdt_fixup_qe_firmware(blob);
+#endif
+}
diff --git a/drivers/qe/qe.h b/drivers/qe/qe.h
index 4c96c67..741ed7f 100644
--- a/drivers/qe/qe.h
+++ b/drivers/qe/qe.h
@@ -289,5 +289,6 @@
int qe_set_mii_clk_src(int ucc_num);
int qe_upload_firmware(const struct qe_firmware *firmware);
struct qe_firmware_info *qe_get_firmware_info(void);
+void ft_qe_setup(void *blob);
#endif /* __QE_H__ */
diff --git a/drivers/rtc/rx8025.c b/drivers/rtc/rx8025.c
index 6c94ae1..9122f12 100644
--- a/drivers/rtc/rx8025.c
+++ b/drivers/rtc/rx8025.c
@@ -142,7 +142,6 @@
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
}
-
/*
* Set the RTC
*/
@@ -166,7 +165,6 @@
rtc_write (RTC_CTL1_REG_ADDR, RTC_CTL1_BIT_2412);
}
-
/*
* Reset the RTC. We setting the date back to 1970-01-01.
*/
@@ -200,7 +198,6 @@
return;
}
-
/*
* Helper functions
*/
@@ -224,4 +221,4 @@
return (((n / 10) << 4) | (n % 10));
}
-#endif /* CONFIG_RTC_RX8025 && (CFG_COMMANDS & CFG_CMD_DATE) */
+#endif /* CONFIG_RTC_RX8025 && CONFIG_CMD_DATE */
diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index 2429464..6b3f60e 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -21,11 +21,15 @@
com_port->mdr1 = 0x7; /* mode select reset TL16C750*/
#endif
com_port->lcr = LCR_BKSE | LCRVAL;
- com_port->dll = baud_divisor & 0xff;
- com_port->dlm = (baud_divisor >> 8) & 0xff;
+ com_port->dll = 0;
+ com_port->dlm = 0;
com_port->lcr = LCRVAL;
com_port->mcr = MCRVAL;
com_port->fcr = FCRVAL;
+ com_port->lcr = LCR_BKSE | LCRVAL;
+ com_port->dll = baud_divisor & 0xff;
+ com_port->dlm = (baud_divisor >> 8) & 0xff;
+ com_port->lcr = LCRVAL;
#if defined(CONFIG_OMAP)
#if defined(CONFIG_APTIX)
com_port->mdr1 = 3; /* /13 mode so Aptix 6MHz can hit 115200 */
@@ -38,12 +42,16 @@
void NS16550_reinit (NS16550_t com_port, int baud_divisor)
{
com_port->ier = 0x00;
+ com_port->lcr = LCR_BKSE | LCRVAL;
+ com_port->dll = 0;
+ com_port->dlm = 0;
+ com_port->lcr = LCRVAL;
+ com_port->mcr = MCRVAL;
+ com_port->fcr = FCRVAL;
com_port->lcr = LCR_BKSE;
com_port->dll = baud_divisor & 0xff;
com_port->dlm = (baud_divisor >> 8) & 0xff;
com_port->lcr = LCRVAL;
- com_port->mcr = MCRVAL;
- com_port->fcr = FCRVAL;
}
void NS16550_putc (NS16550_t com_port, char c)
diff --git a/drivers/spi/mpc8xxx_spi.c b/drivers/spi/mpc8xxx_spi.c
index a3d1c95..2fe838c 100644
--- a/drivers/spi/mpc8xxx_spi.c
+++ b/drivers/spi/mpc8xxx_spi.c
@@ -22,11 +22,11 @@
*/
#include <common.h>
+#if defined(CONFIG_MPC8XXX_SPI) && defined(CONFIG_HARD_SPI)
+
#include <spi.h>
#include <asm/mpc8xxx_spi.h>
-#ifdef CONFIG_HARD_SPI
-
#define SPI_EV_NE (0x80000000 >> 22) /* Receiver Not Empty */
#define SPI_EV_NF (0x80000000 >> 23) /* Transmitter Not Full */
diff --git a/include/common.h b/include/common.h
index 54083f1..13428b3 100644
--- a/include/common.h
+++ b/include/common.h
@@ -203,8 +203,8 @@
void reset_cmd_timeout(void);
/* lib_$(ARCH)/board.c */
-void board_init_f (ulong);
-void board_init_r (gd_t *, ulong);
+void board_init_f (ulong) __attribute__ ((noreturn));
+void board_init_r (gd_t *, ulong) __attribute__ ((noreturn));
int checkboard (void);
int checkflash (void);
int checkdram (void);
@@ -479,6 +479,8 @@
ulong get_PCI_freq (void);
#endif
#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) || defined(CONFIG_LH7A40X)
+void s3c2410_irq(void);
+#define ARM920_IRQ_CALLBACK s3c2410_irq
ulong get_FCLK (void);
ulong get_HCLK (void);
ulong get_PCLK (void);
@@ -663,4 +665,6 @@
#error Read section CONFIG_SKIP_LOWLEVEL_INIT in README.
#endif
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+
#endif /* __COMMON_H_ */
diff --git a/include/configs/AP1000.h b/include/configs/AP1000.h
index d490b33..baa9741 100644
--- a/include/configs/AP1000.h
+++ b/include/configs/AP1000.h
@@ -22,8 +22,6 @@
* (easy to change)
*/
-#undef DEBUG
-
#define CONFIG_405 1 /* This is a PPC405 CPU */
#define CONFIG_4xx 1 /* ...member of PPC4xx family */
diff --git a/include/configs/BAB7xx.h b/include/configs/BAB7xx.h
index c11e9c9..8ec70aa 100644
--- a/include/configs/BAB7xx.h
+++ b/include/configs/BAB7xx.h
@@ -28,7 +28,6 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#undef DEBUG
#define GTREGREAD(x) 0xffffffff /* needed for debug */
/*
diff --git a/include/configs/EB+MCF-EV123.h b/include/configs/EB+MCF-EV123.h
index dae5295..ea49a5d 100644
--- a/include/configs/EB+MCF-EV123.h
+++ b/include/configs/EB+MCF-EV123.h
@@ -27,9 +27,7 @@
#define CONFIG_EB_MCF_EV123
-#undef DEBUG
#undef CFG_HALT_BEFOR_RAM_JUMP
-#undef ET_DEBUG
/*
* High Level Configuration Options (easy to change)
diff --git a/include/configs/ELPPC.h b/include/configs/ELPPC.h
index bb77188..c64537f 100644
--- a/include/configs/ELPPC.h
+++ b/include/configs/ELPPC.h
@@ -28,7 +28,6 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#undef DEBUG
#define GTREGREAD(x) 0xffffffff /* needed for debug */
/*
diff --git a/include/configs/IPHASE4539.h b/include/configs/IPHASE4539.h
index 6fee455..bb2c96a 100644
--- a/include/configs/IPHASE4539.h
+++ b/include/configs/IPHASE4539.h
@@ -30,8 +30,6 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#undef DEBUG /* General debug */
-
/*-----------------------------------------------------------------------
* High Level Configuration Options
* (easy to change)
diff --git a/include/configs/M52277EVB.h b/include/configs/M52277EVB.h
index ab574d5..a3d7bc4 100644
--- a/include/configs/M52277EVB.h
+++ b/include/configs/M52277EVB.h
@@ -38,8 +38,6 @@
#define CONFIG_M52277 /* define processor type */
#define CONFIG_M52277EVB /* M52277EVB board */
-#undef DEBUG
-
#define CONFIG_MCFUART
#define CFG_UART_PORT (0)
#define CONFIG_BAUDRATE 115200
diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h
index 7f544c8..3b4bff3 100644
--- a/include/configs/M5235EVB.h
+++ b/include/configs/M5235EVB.h
@@ -37,8 +37,6 @@
#define CONFIG_MCF523x /* define processor family */
#define CONFIG_M5235 /* define processor type */
-#undef DEBUG
-
#define CONFIG_MCFUART
#define CFG_UART_PORT (0)
#define CONFIG_BAUDRATE 115200
diff --git a/include/configs/M5271EVB.h b/include/configs/M5271EVB.h
index 798ec0c..47e1e03 100644
--- a/include/configs/M5271EVB.h
+++ b/include/configs/M5271EVB.h
@@ -31,8 +31,6 @@
#ifndef _M5271EVB_H
#define _M5271EVB_H
-#undef DEBUG
-
/*
* High Level Configuration Options (easy to change)
*/
diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h
index e956739..1a15c77 100644
--- a/include/configs/M5329EVB.h
+++ b/include/configs/M5329EVB.h
@@ -37,8 +37,6 @@
#define CONFIG_MCF532x /* define processor family */
#define CONFIG_M5329 /* define processor type */
-#undef DEBUG
-
#define CONFIG_MCFUART
#define CFG_UART_PORT (0)
#define CONFIG_BAUDRATE 115200
diff --git a/include/configs/M5373EVB.h b/include/configs/M5373EVB.h
index 6bfffa1..da4156c 100644
--- a/include/configs/M5373EVB.h
+++ b/include/configs/M5373EVB.h
@@ -37,8 +37,6 @@
#define CONFIG_MCF532x /* define processor family */
#define CONFIG_M5373 /* define processor type */
-#undef DEBUG
-
#define CONFIG_MCFUART
#define CFG_UART_PORT (0)
#define CONFIG_BAUDRATE 115200
diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h
index 581c794..5f55761 100644
--- a/include/configs/M54455EVB.h
+++ b/include/configs/M54455EVB.h
@@ -38,8 +38,6 @@
#define CONFIG_M54455 /* define processor type */
#define CONFIG_M54455EVB /* M54455EVB board */
-#undef DEBUG
-
#define CONFIG_MCFUART
#define CFG_UART_PORT (0)
#define CONFIG_BAUDRATE 115200
diff --git a/include/configs/M5475EVB.h b/include/configs/M5475EVB.h
index 84c2105..f0d42be 100644
--- a/include/configs/M5475EVB.h
+++ b/include/configs/M5475EVB.h
@@ -38,8 +38,6 @@
#define CONFIG_M547x /* define processor type */
#define CONFIG_M5475 /* define processor type */
-#undef DEBUG
-
#define CONFIG_MCFUART
#define CFG_UART_PORT (0)
#define CONFIG_BAUDRATE 115200
diff --git a/include/configs/M5485EVB.h b/include/configs/M5485EVB.h
index e9e5ee9..88dd219 100644
--- a/include/configs/M5485EVB.h
+++ b/include/configs/M5485EVB.h
@@ -38,8 +38,6 @@
#define CONFIG_M548x /* define processor type */
#define CONFIG_M5485 /* define processor type */
-#undef DEBUG
-
#define CONFIG_MCFUART
#define CFG_UART_PORT (0)
#define CONFIG_BAUDRATE 115200
diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h
index ad2305c..ff7101f 100644
--- a/include/configs/MPC8315ERDB.h
+++ b/include/configs/MPC8315ERDB.h
@@ -25,8 +25,6 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#undef DEBUG
-
/*
* High Level Configuration Options
*/
diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h
index 295e785..bf5ef4b 100644
--- a/include/configs/MPC8323ERDB.h
+++ b/include/configs/MPC8323ERDB.h
@@ -9,8 +9,6 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#undef DEBUG
-
/*
* High Level Configuration Options
*/
diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h
index 6c0e68a..702b073 100644
--- a/include/configs/MPC832XEMDS.h
+++ b/include/configs/MPC832XEMDS.h
@@ -20,8 +20,6 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#undef DEBUG
-
/*
* High Level Configuration Options
*/
diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
index 07f2f30..331f4c9 100644
--- a/include/configs/MPC8349EMDS.h
+++ b/include/configs/MPC8349EMDS.h
@@ -29,8 +29,6 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#undef DEBUG
-
/*
* High Level Configuration Options
*/
@@ -356,6 +354,7 @@
#define CFG_I2C2_OFFSET 0x3100
/* SPI */
+#define CONFIG_MPC8XXX_SPI
#define CONFIG_HARD_SPI /* SPI with hardware support */
#undef CONFIG_SOFT_SPI /* SPI bit-banged */
diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h
index 168ca2a..eff9fba 100644
--- a/include/configs/MPC8360EMDS.h
+++ b/include/configs/MPC8360EMDS.h
@@ -22,8 +22,6 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#undef DEBUG
-
/*
* High Level Configuration Options
*/
diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h
index 83a4b1e..27b037a 100644
--- a/include/configs/MPC8360ERDK.h
+++ b/include/configs/MPC8360ERDK.h
@@ -17,8 +17,6 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#undef DEBUG
-
/*
* High Level Configuration Options
*/
diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h
index 2b84e9c..61de084 100644
--- a/include/configs/MPC837XEMDS.h
+++ b/include/configs/MPC837XEMDS.h
@@ -21,8 +21,6 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#undef DEBUG
-
/*
* High Level Configuration Options
*/
diff --git a/include/configs/MPC8540EVAL.h b/include/configs/MPC8540EVAL.h
index bf64f27..174215c 100644
--- a/include/configs/MPC8540EVAL.h
+++ b/include/configs/MPC8540EVAL.h
@@ -240,8 +240,6 @@
#define INTEL_LXT971_PHY 1
#endif
-#undef DEBUG
-
/* Environment */
#ifndef CFG_RAMBOOT
#if defined(CONFIG_RAM_AS_FLASH)
diff --git a/include/configs/MVBLUE.h b/include/configs/MVBLUE.h
index 0defafe..d799f54 100644
--- a/include/configs/MVBLUE.h
+++ b/include/configs/MVBLUE.h
@@ -53,8 +53,6 @@
#define ERR_LED(code)
#endif
-#undef DEBUG
-
#define CONFIG_MPC824X 1
#define CONFIG_MPC8245 1
#define CONFIG_MVBLUE 1
diff --git a/include/configs/QS823.h b/include/configs/QS823.h
index 3657fea..3dd84e8 100644
--- a/include/configs/QS823.h
+++ b/include/configs/QS823.h
@@ -38,7 +38,6 @@
#undef CFG_DEVICE_NULLDEV /* null device */
#undef CONFIG_SILENT_CONSOLE /* silent console */
#undef CFG_CONSOLE_INFO_QUIET /* silent console ? */
-#undef DEBUG /* debug output code */
#undef DEBUG_FLASH /* debug flash code */
#undef FLASH_DEBUG /* debug fash code */
#undef DEBUG_ENV /* debug environment code */
diff --git a/include/configs/QS850.h b/include/configs/QS850.h
index 3db539f..7dd6eca 100644
--- a/include/configs/QS850.h
+++ b/include/configs/QS850.h
@@ -38,7 +38,6 @@
#undef CFG_DEVICE_NULLDEV /* null device */
#undef CONFIG_SILENT_CONSOLE /* silent console */
#undef CFG_CONSOLE_INFO_QUIET /* silent console ? */
-#undef DEBUG /* debug output code */
#undef DEBUG_FLASH /* debug flash code */
#undef FLASH_DEBUG /* debug fash code */
#undef DEBUG_ENV /* debug environment code */
diff --git a/include/configs/QS860T.h b/include/configs/QS860T.h
index b3442de..62cf2a4 100644
--- a/include/configs/QS860T.h
+++ b/include/configs/QS860T.h
@@ -38,7 +38,6 @@
#undef CFG_DEVICE_NULLDEV /* null device */
#undef CONFIG_SILENT_CONSOLE /* silent console */
#undef CFG_CONSOLE_INFO_QUIET /* silent console ? */
-#undef DEBUG /* debug output code */
#undef DEBUG_FLASH /* debug flash code */
#undef FLASH_DEBUG /* debug fash code */
#undef DEBUG_ENV /* debug environment code */
diff --git a/include/configs/Rattler.h b/include/configs/Rattler.h
index d7652fa..428c0c2 100644
--- a/include/configs/Rattler.h
+++ b/include/configs/Rattler.h
@@ -37,8 +37,6 @@
#define CONFIG_RATTLER /* Analogue&Micro Rattler board */
-#undef DEBUG
-
/* Allow serial number (serial#) and MAC address (ethaddr) to be overwritten */
#define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h
index 8ef3f09..7373d7b 100644
--- a/include/configs/TQM834x.h
+++ b/include/configs/TQM834x.h
@@ -181,7 +181,7 @@
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
+#define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc */
/*
* Serial Port
@@ -302,7 +302,7 @@
#ifndef CFG_RAMBOOT
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
- #define CFG_ENV_SECT_SIZE 0x20000 /* 256K(one sector) for env */
+ #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
#define CFG_ENV_SIZE 0x2000
#else
#define CFG_NO_FLASH 1 /* Flash is not usable now */
@@ -335,6 +335,7 @@
#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_MII
#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
#if defined(CONFIG_PCI)
#define CONFIG_CMD_PCI
@@ -557,7 +558,7 @@
#define MTDIDS_DEFAULT "nor0=TQM834x-0"
/* default mtd partition table */
-#define MTDPARTS_DEFAULT "mtdparts=TQM834x-0:256k(u-boot),128k(env),"\
+#define MTDPARTS_DEFAULT "mtdparts=TQM834x-0:256k(u-boot),256k(env),"\
"1m(kernel),2m(initrd),"\
"-(user);"\
diff --git a/include/configs/ads5121.h b/include/configs/ads5121.h
index ce458ae5..09c3140 100644
--- a/include/configs/ads5121.h
+++ b/include/configs/ads5121.h
@@ -27,9 +27,6 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#define DEBUG
-#undef DEBUG
-
/*
* Memory map for the ADS5121 board:
*
@@ -109,25 +106,22 @@
* [04:00] DRAM tRPA
*/
-#define CFG_MDDRC_SYS_CFG 0xF8604200
-#define CFG_MDDRC_SYS_CFG_RUN 0xE8604200
-#define CFG_MDDRC_SYS_CFG_EN 0x30000000
-#define CFG_MDDRC_TIME_CFG0 0x0000281E
-#define CFG_MDDRC_TIME_CFG0_RUN 0x01F4281E
+#define CFG_MDDRC_SYS_CFG 0xF8604A00
+#define CFG_MDDRC_SYS_CFG_RUN 0xE8604A00
+#define CFG_MDDRC_SYS_CFG_EN 0xF0000000
+#define CFG_MDDRC_TIME_CFG0 0x00003D2E
+#define CFG_MDDRC_TIME_CFG0_RUN 0x06183D2E
#define CFG_MDDRC_TIME_CFG1 0x54EC1168
#define CFG_MDDRC_TIME_CFG2 0x35210864
#define CFG_MICRON_NOP 0x01380000
#define CFG_MICRON_PCHG_ALL 0x01100400
-#define CFG_MICRON_MR 0x01000022
#define CFG_MICRON_EM2 0x01020000
#define CFG_MICRON_EM3 0x01030000
#define CFG_MICRON_EN_DLL 0x01010000
-#define CFG_MICRON_RST_DLL 0x01000932
#define CFG_MICRON_RFSH 0x01080000
-#define CFG_MICRON_INIT_DEV_OP 0x01000832
+#define CFG_MICRON_INIT_DEV_OP 0x01000432
#define CFG_MICRON_OCD_DEFAULT 0x01010780
-#define CFG_MICRON_OCD_EXIT 0x01010400
/* DDR Priority Manager Configuration */
#define CFG_MDDRCGRP_PM_CFG1 0x000777AA
@@ -415,8 +409,9 @@
#define CONFIG_OF_BOARD_SETUP 1
#define OF_CPU "PowerPC,5121@0"
-#define OF_SOC "soc5121@80000000"
+#define OF_SOC "soc@80000000"
+#define OF_SOC_OLD "soc5121@80000000"
#define OF_TBCLK (bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH "/soc5121@80000000/serial@11300"
+#define OF_STDOUT_PATH "/soc@80000000/serial@11300"
#endif /* __CONFIG_H */
diff --git a/include/configs/assabet.h b/include/configs/assabet.h
index 226ad54..d10f092 100644
--- a/include/configs/assabet.h
+++ b/include/configs/assabet.h
@@ -29,8 +29,6 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#undef DEBUG
-
/*
* High Level Configuration Options
* (easy to change)
diff --git a/include/configs/ep8248.h b/include/configs/ep8248.h
index 85ad70a..cebe849 100644
--- a/include/configs/ep8248.h
+++ b/include/configs/ep8248.h
@@ -31,8 +31,6 @@
#define CONFIG_EP8248 /* Embedded Planet EP8248 board */
-#undef DEBUG
-
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
/* Allow serial number (serial#) and MAC address (ethaddr) to be overwritten */
diff --git a/include/configs/ep82xxm.h b/include/configs/ep82xxm.h
index 4febd32..8e5d6e5 100644
--- a/include/configs/ep82xxm.h
+++ b/include/configs/ep82xxm.h
@@ -31,8 +31,6 @@
#define CONFIG_EP82XXM /* Embedded Planet EP82xxM H 1.0 board */
/* 256MB SDRAM / 64MB FLASH */
-#undef DEBUG
-
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
/* Allow serial number (serial#) and MAC address (ethaddr) to be overwritten */
diff --git a/include/configs/gcplus.h b/include/configs/gcplus.h
index e11ce4c..3b1b4ab 100644
--- a/include/configs/gcplus.h
+++ b/include/configs/gcplus.h
@@ -29,8 +29,6 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#undef DEBUG
-
/*
* The ADS GCPlus Linux boot ROM loads U-Boot into RAM at 0xc0200000.
* We don't actually init RAM in this case since we're using U-Boot as
diff --git a/include/configs/gw8260.h b/include/configs/gw8260.h
index ff57240..7c2c224 100644
--- a/include/configs/gw8260.h
+++ b/include/configs/gw8260.h
@@ -51,7 +51,6 @@
#define __CONFIG_H
/* Enable debug prints */
-#undef DEBUG /* General debug */
#undef DEBUG_BOOTP_EXT /* Debug received vendor fields */
/* What is the oscillator's (UX2) frequency in Hz? */
diff --git a/include/configs/mgcoge.h b/include/configs/mgcoge.h
index 3de2466..f4a1cc0 100644
--- a/include/configs/mgcoge.h
+++ b/include/configs/mgcoge.h
@@ -35,8 +35,6 @@
#define CONFIG_CPM2 1 /* Has a CPM2 */
-#undef DEBUG
-
/*
* Select serial console configuration
*
diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h
index bd3107a..c7216c9 100644
--- a/include/configs/mpc7448hpc2.h
+++ b/include/configs/mpc7448hpc2.h
@@ -33,8 +33,6 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#undef DEBUG
-
/* Board Configuration Definitions */
/* MPC7448HPC2 (High-Performance Computing II) (Taiga) board */
diff --git a/include/configs/ms7720se.h b/include/configs/ms7720se.h
index 7035002..9c94c4e 100644
--- a/include/configs/ms7720se.h
+++ b/include/configs/ms7720se.h
@@ -25,7 +25,6 @@
#ifndef __MS7720SE_H
#define __MS7720SE_H
-#undef DEBUG
#define CONFIG_SH 1
#define CONFIG_SH3 1
#define CONFIG_CPU_SH7720 1
diff --git a/include/configs/ms7722se.h b/include/configs/ms7722se.h
index ae0d018..8538037 100644
--- a/include/configs/ms7722se.h
+++ b/include/configs/ms7722se.h
@@ -25,7 +25,6 @@
#ifndef __MS7722SE_H
#define __MS7722SE_H
-#undef DEBUG
#define CONFIG_SH 1
#define CONFIG_SH4 1
#define CONFIG_CPU_SH7722 1
diff --git a/include/configs/ms7750se.h b/include/configs/ms7750se.h
index 3668156..a25364d 100644
--- a/include/configs/ms7750se.h
+++ b/include/configs/ms7750se.h
@@ -25,7 +25,6 @@
#ifndef __MS7750SE_H
#define __MS7750SE_H
-#undef DEBUG
#define CONFIG_SH 1
#define CONFIG_SH4 1
#define CONFIG_CPU_SH7750 1
diff --git a/include/configs/munices.h b/include/configs/munices.h
index 2372b57..38b27bb 100644
--- a/include/configs/munices.h
+++ b/include/configs/munices.h
@@ -48,7 +48,7 @@
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/ppmc7xx.h b/include/configs/ppmc7xx.h
index fe7de7b..1d2d38b 100644
--- a/include/configs/ppmc7xx.h
+++ b/include/configs/ppmc7xx.h
@@ -30,7 +30,6 @@
* do_bdinfo - Required to build with debug
*/
-#undef DEBUG
#ifdef DEBUG
#define GTREGREAD(x) 0xFFFFFFFF
#define do_bdinfo(a,b,c,d)
diff --git a/include/configs/qemu-mips.h b/include/configs/qemu-mips.h
index 33c8283..e164019 100644
--- a/include/configs/qemu-mips.h
+++ b/include/configs/qemu-mips.h
@@ -32,8 +32,6 @@
#define CONFIG_QEMU_MIPS 1
#define CONFIG_MISC_INIT_R
-#undef DEBUG
-
/*IP address is default used by Qemu*/
#define CONFIG_IPADDR 10.0.2.15 /* Our IP address */
#define CONFIG_SERVERIP 10.0.2.2 /* Server IP address*/
diff --git a/include/configs/sacsng.h b/include/configs/sacsng.h
index c474acd..ec7d34a 100644
--- a/include/configs/sacsng.h
+++ b/include/configs/sacsng.h
@@ -35,7 +35,6 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#undef DEBUG /* General debug */
#undef DEBUG_BOOTP_EXT /* Debug received vendor fields */
#undef CONFIG_LOGBUFFER /* External logbuffer support */
diff --git a/include/configs/sbc8260.h b/include/configs/sbc8260.h
index b1d41a6..6063398 100644
--- a/include/configs/sbc8260.h
+++ b/include/configs/sbc8260.h
@@ -36,7 +36,6 @@
#define __CONFIG_H
/* Enable debug prints */
-#undef DEBUG /* General debug */
#undef DEBUG_BOOTP_EXT /* Debug received vendor fields */
/*****************************************************************************
diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h
index 4cc4ff1..2498b3e 100644
--- a/include/configs/sbc8349.h
+++ b/include/configs/sbc8349.h
@@ -31,8 +31,6 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#undef DEBUG
-
/*
* High Level Configuration Options
*/
diff --git a/include/configs/trizepsiv.h b/include/configs/trizepsiv.h
index 84998d4..7a15d97 100644
--- a/include/configs/trizepsiv.h
+++ b/include/configs/trizepsiv.h
@@ -140,7 +140,7 @@
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
/* #define CONFIG_INITRD_TAG 1 */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/voiceblue.h b/include/configs/voiceblue.h
index 7cab31d..8c827af 100644
--- a/include/configs/voiceblue.h
+++ b/include/configs/voiceblue.h
@@ -26,10 +26,6 @@
#include <configs/omap1510.h>
-/*
- * High Level Configuration Options
- * (easy to change)
- */
#define CONFIG_ARM925T 1 /* This is an arm925t CPU */
#define CONFIG_OMAP 1 /* in a TI OMAP core */
#define CONFIG_OMAP1510 1 /* which is in a 5910 */
@@ -54,10 +50,9 @@
*/
#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
#define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE SZ_64M
+#define PHYS_SDRAM_1_SIZE (64 * 1024 * 1024)
#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
-#define PHYS_FLASH_2 0x0c000000
#define CFG_LOAD_ADDR PHYS_SDRAM_1 + 0x400000 /* default load address */
@@ -67,50 +62,34 @@
#define CFG_FLASH_CFI /* Flash is CFI conformant */
#define CFG_FLASH_CFI_DRIVER /* Use the common driver */
#define CFG_MAX_FLASH_BANKS 1
-#ifdef VOICEBLUE_SMALL_FLASH
-#define CFG_FLASH_BANKS_LIST { PHYS_FLASH_2 }
-#else
-#define CFG_FLASH_BANKS_LIST { PHYS_FLASH_1 }
-#endif
+#define CFG_FLASH_BASE PHYS_FLASH_1
/* FIXME: Does not work on AMD flash */
/* #define CFG_FLASH_USE_BUFFER_WRITE 1 */ /* use buffered writes (20x faster) */
#define CFG_MAX_FLASH_SECT 512 /* max # of sectors on one chip */
#define CFG_MONITOR_BASE PHYS_FLASH_1
-#define CFG_MONITOR_LEN SZ_128K
+#define CFG_MONITOR_LEN (256 * 1024)
/*
* Environment settings
*/
-#ifdef VOICEBLUE_SMALL_FLASH
-#define CFG_ENV_IS_NOWHERE
-#define CFG_ENV_SIZE SZ_1K
-#else
#define CFG_ENV_IS_IN_FLASH
#define CFG_ENV_ADDR (PHYS_FLASH_1 + CFG_MONITOR_LEN)
-#define CFG_ENV_SIZE SZ_8K
-#define CFG_ENV_SECT_SIZE SZ_64K
+#define CFG_ENV_SIZE (8 * 1024)
+#define CFG_ENV_SECT_SIZE (64 * 1024)
#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
#define CFG_ENV_SIZE_REDUND CFG_ENV_SIZE
#define CONFIG_ENV_OVERWRITE
-#endif
-
/*
* Size of malloc() pool and stack
*/
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
-#ifdef VOICEBLUE_SMALL_FLASH
-#define CFG_MALLOC_LEN (SZ_64K - CFG_GBL_DATA_SIZE)
-#define CONFIG_STACKSIZE SZ_8K
-#define PHYS_SDRAM_1_RESERVED 0
-#else
-#define CFG_MALLOC_LEN SZ_4M
-#define CONFIG_STACKSIZE SZ_1M
+#define CFG_MALLOC_LEN (4 * 1024 * 1024)
+#define CONFIG_STACKSIZE (1 * 1024 * 1024)
#define PHYS_SDRAM_1_RESERVED (CFG_MONITOR_LEN + CFG_MALLOC_LEN + CONFIG_STACKSIZE)
-#endif
/*
* Hardware drivers
@@ -118,6 +97,14 @@
#define CONFIG_DRIVER_SMC91111
#define CONFIG_SMC91111_BASE 0x08000300
+#define CONFIG_HARD_I2C
+#define CFG_I2C_SPEED 100000
+#define CFG_I2C_SLAVE 1
+#define CONFIG_DRIVER_OMAP1510_I2C
+
+#define CONFIG_RTC_DS1307
+#define CFG_I2C_RTC_ADDR 0x68
+
/*
* NS16550 Configuration
*/
@@ -138,21 +125,18 @@
#include <config_cmd_default.h>
#define CONFIG_CMD_BDI
-#define CONFIG_CMD_LOADB
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_NET
#define CONFIG_CMD_BOOTD
#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_NET
#define CONFIG_CMD_PING
#define CONFIG_CMD_RUN
-#if !defined(VOICEBLUE_SMALL_FLASH)
- #define CONFIG_CMD_ENV
- #define CONFIG_CMD_JFFS2
-#endif
-
/*
* BOOTP options
@@ -165,32 +149,20 @@
#define CONFIG_LOOPW
-#ifdef VOICEBLUE_SMALL_FLASH
-#define CONFIG_BOOTDELAY 0
-#undef CONFIG_BOOTARGS /* the preboot command will set bootargs*/
-#define CFG_AUTOLOAD "n" /* no autoload */
-#define CONFIG_PREBOOT "run setup"
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "setup=setenv bootargs console=ttyS0,${baudrate} " \
- "root=/dev/nfs ip=dhcp\0" \
- "update=erase c000000 c03ffff; " \
- "cp.b 10400000 c000000 ${filesize}\0"
-#else
#define CONFIG_BOOTDELAY 3
-#undef CONFIG_BOOTARGS /* boot command will set bootargs */
-#define CFG_AUTOLOAD "n" /* no autoload */
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* allow to break in always */
+#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/
+#define CFG_AUTOLOAD "n" /* No autoload */
#define CONFIG_BOOTCOMMAND "run nboot"
#define CONFIG_PREBOOT "run setup"
#define CONFIG_EXTRA_ENV_SETTINGS \
"silent=1\0" \
"ospart=0\0" \
- "swapos=no\0" \
+ "bootfile=/boot/uImage\0" \
"setpart=" \
- "if test $swapos = yes; then " \
- "if test $ospart -eq 0; then chpart 4; else chpart 3; fi; "\
- "setenv swapos no; saveenv; " \
- "else " \
- "if test $ospart -eq 0; then chpart 3; else chpart 4; fi; "\
+ "if test -n $swapos; then " \
+ "setenv swapos; saveenv; " \
+ "if test $ospart -eq 0; then setenv ospart 1; else setenv ospart 0; fi; "\
"fi\0" \
"setup=setenv bootargs console=ttyS0,$baudrate " \
"mtdparts=$mtdparts\0" \
@@ -198,16 +170,14 @@
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off " \
"nfsroot=$rootpath root=/dev/nfs\0" \
"flashargs=run setpart; setenv bootargs $bootargs " \
- "root=/dev/mtdblock$partition ro " \
+ "root=mtd:data$ospart ro " \
"rootfstype=jffs2\0" \
"initrdargs=setenv bootargs $bootargs " \
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off\0" \
- "fboot=run flashargs; fsload /boot/uImage; bootm\0" \
- "iboot=bootp; run initrdargs; tftp; bootm\0" \
+ "fboot=run flashargs; chpart data$ospart; fsload; bootm\0" \
+ "mboot=bootp; run initrdargs; tftp; bootm\0" \
"nboot=bootp; run nfsargs; tftp; bootm\0"
-#endif
-#ifndef VOICEBLUE_SMALL_FLASH
#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */
#if 1 /* feel free to disable for development */
@@ -221,19 +191,15 @@
*/
#define CONFIG_JFFS2_CMDLINE
#define MTDIDS_DEFAULT "nor0=omapflash.0"
-#define MTDPARTS_DEFAULT "mtdparts=omapflash.0:128k(uboot),64k(env),64k(r_env),16256k(data1),-(data2)"
-
-#endif /* VOICEBLUE_SMALL_FLASH */
+#define MTDPARTS_DEFAULT "mtdparts=omapflash.0:256k(u-boot),64k(env),64k(r_env),16192k(data0),-(data1)"
/*
* Miscellaneous configurable options
*/
-#ifndef VOICEBLUE_SMALL_FLASH
#define CFG_HUSH_PARSER
#define CFG_PROMPT_HUSH_PS2 "> "
#define CONFIG_AUTO_COMPLETE
-#endif
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "# " /* Monitor Command Prompt */
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
diff --git a/include/configs/xsengine.h b/include/configs/xsengine.h
index 766617e..d167e01 100644
--- a/include/configs/xsengine.h
+++ b/include/configs/xsengine.h
@@ -33,7 +33,7 @@
#define CONFIG_XSENGINE 1
#define CONFIG_MMC 1
#define CONFIG_DOS_PARTITION 1
-#define BOARD_POST_INIT 1
+#define OARD_LATE_INIT 1
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */
diff --git a/include/mpc512x.h b/include/mpc512x.h
index d1c6fb2..b51cf78 100644
--- a/include/mpc512x.h
+++ b/include/mpc512x.h
@@ -185,7 +185,7 @@
/* SCFR1 System Clock Frequency Register 1
*/
-#define SCFR1_IPS_DIV 0x4
+#define SCFR1_IPS_DIV 0x3
#define SCFR1_IPS_DIV_MASK 0x03800000
#define SCFR1_IPS_DIV_SHIFT 23
diff --git a/include/serial.h b/include/serial.h
index e292f0c..2b99e53 100644
--- a/include/serial.h
+++ b/include/serial.h
@@ -36,6 +36,11 @@
#endif
+#if defined(CONFIG_S3C2410)
+extern struct serial_device s3c24xx_serial0_device;
+extern struct serial_device s3c24xx_serial1_device;
+extern struct serial_device s3c24xx_serial2_device;
+#endif
extern struct serial_device serial_ffuart_device;
extern struct serial_device serial_btuart_device;
diff --git a/lib_arm/board.c b/lib_arm/board.c
index 7e7a282..22d573a 100644
--- a/lib_arm/board.c
+++ b/lib_arm/board.c
@@ -84,6 +84,11 @@
extern void rtl8019_get_enetaddr (uchar * addr);
#endif
+#if defined(CONFIG_HARD_I2C) || \
+ defined(CONFIG_SOFT_I2C)
+#include <i2c.h>
+#endif
+
/*
* Begin and End of memory area for malloc(), and current "brk"
*/
@@ -209,6 +214,16 @@
}
#endif /* CFG_NO_FLASH */
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+static int init_func_i2c (void)
+{
+ puts ("I2C: ");
+ i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+ puts ("ready\n");
+ return (0);
+}
+#endif
+
/*
* Breathe some life into the board...
*
@@ -251,6 +266,9 @@
#if defined(CONFIG_DISPLAY_BOARDINFO)
checkboard, /* display board info */
#endif
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+ init_func_i2c,
+#endif
dram_init, /* configure available RAM banks */
display_dram_config,
NULL,
diff --git a/net/nfs.c b/net/nfs.c
index aa8d612..6573c17 100644
--- a/net/nfs.c
+++ b/net/nfs.c
@@ -34,7 +34,8 @@
#if defined(CONFIG_CMD_NET) && defined(CONFIG_CMD_NFS)
#define HASHES_PER_LINE 65 /* Number of "loading" hashes per line */
-#define NFS_TIMEOUT 60UL
+#define NFS_RETRY_COUNT 30
+#define NFS_TIMEOUT 2UL
static int fs_mounted = 0;
static unsigned long rpc_id = 0;
@@ -586,6 +587,10 @@
static void
NfsTimeout (void)
{
+ if ( NfsTimeoutCount++ < NFS_RETRY_COUNT ) {
+ NfsSend ();
+ return;
+ }
puts ("Timeout\n");
NetState = NETLOOP_FAIL;
return;
diff --git a/net/tftp.c b/net/tftp.c
index 8b95bcf..3dd2b06 100644
--- a/net/tftp.c
+++ b/net/tftp.c
@@ -34,7 +34,7 @@
#define TFTP_ERROR 5
#define TFTP_OACK 6
-
+static IPaddr_t TftpServerIP;
static int TftpServerPort; /* The UDP port at their end */
static int TftpOurPort; /* The UDP port at our end */
static int TftpTimeoutCount;
@@ -55,7 +55,14 @@
#define DEFAULT_NAME_LEN (8 + 4 + 1)
static char default_filename[DEFAULT_NAME_LEN];
-static char *tftp_filename;
+
+#ifndef CONFIG_TFTP_FILE_NAME_MAX_LEN
+#define MAX_LEN 128
+#else
+#define MAX_LEN CONFIG_TFTP_FILE_NAME_MAX_LEN
+#endif
+
+static char tftp_filename[MAX_LEN];
#ifdef CFG_DIRECT_FLASH_TFTP
extern flash_info_t flash_info[];
@@ -231,7 +238,7 @@
break;
}
- NetSendUDPPacket(NetServerEther, NetServerIP, TftpServerPort, TftpOurPort, len);
+ NetSendUDPPacket(NetServerEther, TftpServerIP, TftpServerPort, TftpOurPort, len);
}
@@ -372,7 +379,7 @@
#ifdef CONFIG_MCAST_TFTP
/* if I am the MasterClient, actively calculate what my next
* needed block is; else I'm passive; not ACKING
- */
+ */
if (Multicast) {
if (len < TftpBlkSize) {
TftpEndingBlock = TftpBlock;
@@ -453,30 +460,43 @@
char *ep; /* Environment pointer */
#endif
+ TftpServerIP = NetServerIP;
if (BootFile[0] == '\0') {
sprintf(default_filename, "%02lX%02lX%02lX%02lX.img",
NetOurIP & 0xFF,
(NetOurIP >> 8) & 0xFF,
(NetOurIP >> 16) & 0xFF,
(NetOurIP >> 24) & 0xFF );
- tftp_filename = default_filename;
+
+ strncpy(tftp_filename, default_filename, MAX_LEN);
+ tftp_filename[MAX_LEN-1] = 0;
printf ("*** Warning: no boot file name; using '%s'\n",
tftp_filename);
} else {
- tftp_filename = BootFile;
+ char *p = strchr (p, ':');
+
+ if (p == NULL) {
+ strncpy(tftp_filename, BootFile, MAX_LEN);
+ tftp_filename[MAX_LEN-1] = 0;
+ } else {
+ *p++ = '\0';
+ TftpServerIP = string_to_ip (BootFile);
+ strncpy(tftp_filename, p, MAX_LEN);
+ tftp_filename[MAX_LEN-1] = 0;
+ }
}
#if defined(CONFIG_NET_MULTI)
printf ("Using %s device\n", eth_get_name());
#endif
- puts ("TFTP from server "); print_IPaddr (NetServerIP);
+ puts ("TFTP from server "); print_IPaddr (TftpServerIP);
puts ("; our IP address is "); print_IPaddr (NetOurIP);
/* Check if we need to send across this subnet */
if (NetOurGatewayIP && NetOurSubnetMask) {
- IPaddr_t OurNet = NetOurIP & NetOurSubnetMask;
- IPaddr_t ServerNet = NetServerIP & NetOurSubnetMask;
+ IPaddr_t OurNet = NetOurIP & NetOurSubnetMask;
+ IPaddr_t ServerNet = TftpServerIP & NetOurSubnetMask;
if (OurNet != ServerNet) {
puts ("; sending through gateway ");
@@ -522,7 +542,7 @@
/* Revert TftpBlkSize to dflt */
TftpBlkSize = TFTP_BLOCK_SIZE;
#ifdef CONFIG_MCAST_TFTP
- mcast_cleanup();
+ mcast_cleanup();
#endif
TftpSend ();
diff --git a/post/tests.c b/post/tests.c
index 0c49e32..698f85c 100644
--- a/post/tests.c
+++ b/post/tests.c
@@ -241,8 +241,8 @@
{
"ECC test",
"ecc",
- "This test checks ECC facility of memory.",
- POST_ROM | POST_ALWAYS,
+ "This test checks the ECC facility of memory.",
+ POST_ROM | POST_ALWAYS | POST_PREREL,
&ecc_post_test,
NULL,
NULL,