IDE: - make ide_inb () and ide_outb () "weak", so boards can
define there own I/O functions.
(Needed for the pcs440ep board).
- The default I/O Functions are again 8 Bit accesses.
- Added CONFIG_CMD_IDE for the pcs440ep Board.
Signed-off-by: Heiko Schocher <hs@denx.de>
diff --git a/board/pcs440ep/pcs440ep.c b/board/pcs440ep/pcs440ep.c
index e247fee..90e99d3 100644
--- a/board/pcs440ep/pcs440ep.c
+++ b/board/pcs440ep/pcs440ep.c
@@ -30,6 +30,7 @@
#include <spd_sdram.h>
#include <status_led.h>
#include <sha1.h>
+#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -867,6 +868,29 @@
);
#endif
+#if defined (CONFIG_CMD_IDE)
+/* These addresses need to be shifted one place to the left
+ * ( bus per_addr 20 -30 is connectsd on CF bus A10-A0)
+ * These values are shifted
+ */
+extern ulong *ide_bus_offset;
+void inline ide_outb(int dev, int port, unsigned char val)
+{
+ debug ("ide_outb (dev= %d, port= 0x%x, val= 0x%02x) : @ 0x%08lx\n",
+ dev, port, val, (ATA_CURR_BASE(dev)+port));
+
+ out_be16((u16 *)(ATA_CURR_BASE(dev)+(port << 1)), val);
+}
+unsigned char inline ide_inb(int dev, int port)
+{
+ uchar val;
+ val = in_be16((u16 *)(ATA_CURR_BASE(dev)+(port << 1)));
+ debug ("ide_inb (dev= %d, port= 0x%x) : @ 0x%08lx -> 0x%02x\n",
+ dev, port, (ATA_CURR_BASE(dev)+port), val);
+ return (val);
+}
+#endif
+
#ifdef CONFIG_IDE_PREINIT
int ide_preinit (void)
{
diff --git a/common/cmd_ide.c b/common/cmd_ide.c
index 89fefed..bb064ea 100644
--- a/common/cmd_ide.c
+++ b/common/cmd_ide.c
@@ -31,6 +31,7 @@
#include <command.h>
#include <image.h>
#include <asm/byteorder.h>
+#include <asm/io.h>
#if defined(CONFIG_IDE_8xx_DIRECT) || defined(CONFIG_IDE_PCMCIA)
# include <pcmcia.h>
@@ -128,8 +129,6 @@
};
-#define ATA_CURR_BASE(dev) (CFG_ATA_BASE_ADDR+ide_bus_offset[IDE_BUS(dev)])
-
#ifndef CONFIG_AMIGAONEG3SE
static int ide_bus_ok[CFG_IDE_MAXBUS];
#else
@@ -172,8 +171,8 @@
#define IDE_SPIN_UP_TIME_OUT 5000 /* 5 sec spin-up timeout */
-static void __inline__ ide_outb(int dev, int port, unsigned char val);
-static unsigned char __inline__ ide_inb(int dev, int port);
+void inline ide_outb(int dev, int port, unsigned char val);
+unsigned char inline ide_inb(int dev, int port);
static void input_data(int dev, ulong *sect_buf, int words);
static void output_data(int dev, ulong *sect_buf, int words);
static void ident_cpy (unsigned char *dest, unsigned char *src, unsigned int len);
@@ -805,45 +804,27 @@
/* ------------------------------------------------------------------------- */
-#if defined(__PPC__) || defined(CONFIG_PXA_PCMCIA)
-static void __inline__
-ide_outb(int dev, int port, unsigned char val)
+void inline
+__ide_outb(int dev, int port, unsigned char val)
{
debug ("ide_outb (dev= %d, port= 0x%x, val= 0x%02x) : @ 0x%08lx\n",
- dev, port, val, (ATA_CURR_BASE(dev)+port));
-
- /* Ensure I/O operations complete */
- EIEIO;
- *((u16 *)(ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port))) = val;
+ dev, port, val, (ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port)));
+ outb(val, (ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port)));
}
-#else /* ! __PPC__ */
-static void __inline__
-ide_outb(int dev, int port, unsigned char val)
-{
- outb(val, ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port));
-}
-#endif /* __PPC__ */
+void inline ide_outb (int dev, int port, unsigned char val)
+ __attribute__((weak, alias("__ide_outb")));
-
-#if defined(__PPC__) || defined(CONFIG_PXA_PCMCIA)
-static unsigned char __inline__
-ide_inb(int dev, int port)
+unsigned char inline
+__ide_inb(int dev, int port)
{
uchar val;
- /* Ensure I/O operations complete */
- EIEIO;
- val = *((u16 *)(ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port)));
+ val = inb((ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port)));
debug ("ide_inb (dev= %d, port= 0x%x) : @ 0x%08lx -> 0x%02x\n",
- dev, port, (ATA_CURR_BASE(dev)+port), val);
- return (val);
+ dev, port, (ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port)), val);
+ return val;
}
-#else /* ! __PPC__ */
-static unsigned char __inline__
-ide_inb(int dev, int port)
-{
- return inb(ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port));
-}
-#endif /* __PPC__ */
+unsigned char inline ide_inb(int dev, int port)
+ __attribute__((weak, alias("__ide_inb")));
#ifdef __PPC__
# ifdef CONFIG_AMIGAONEG3SE
diff --git a/include/asm-ppc/io.h b/include/asm-ppc/io.h
index 03289bc..11dfa1c 100644
--- a/include/asm-ppc/io.h
+++ b/include/asm-ppc/io.h
@@ -13,6 +13,9 @@
#define SIO_CONFIG_RA 0x398
#define SIO_CONFIG_RD 0x399
+#ifndef _IO_BASE
+#define _IO_BASE 0
+#endif
#define readb(addr) in_8((volatile u8 *)(addr))
#define writeb(b,addr) out_8((volatile u8 *)(addr), (b))
diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h
index 8e51d2d..7653ba1 100644
--- a/include/configs/pcs440ep.h
+++ b/include/configs/pcs440ep.h
@@ -266,7 +266,10 @@
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_ELF
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
@@ -274,12 +277,10 @@
#define CONFIG_CMD_PCI
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_REISER
#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
#define CONFIG_CMD_USB
-
#define CONFIG_SUPPORT_VFAT
/*
@@ -488,10 +489,4 @@
/* Offset for alternate registers */
#define CFG_ATA_ALT_OFFSET (0x0000)
-/* These addresses need to be shifted one place to the left
- * ( bus per_addr 20 -30 is connectsd on CF bus A10-A0)
- * These values are shifted
- */
-#define CFG_ATA_PORT_ADDR(port) ((port) << 1)
-
#endif /* __CONFIG_H */
diff --git a/include/ide.h b/include/ide.h
index 6976a6c..222f4f8 100644
--- a/include/ide.h
+++ b/include/ide.h
@@ -26,6 +26,8 @@
#define IDE_BUS(dev) (dev >> 1)
+#define ATA_CURR_BASE(dev) (CFG_ATA_BASE_ADDR+ide_bus_offset[IDE_BUS(dev)])
+
#ifdef CONFIG_IDE_LED
/*