doc: board: phytec: phycore-am62x: Update artifact names
Use proper binary artifact names for HSFS devices.
Do not use the *_unsigned binaries.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
diff --git a/doc/board/phytec/phycore-am62x.rst b/doc/board/phytec/phycore-am62x.rst
index 1d641a7..bc6d524 100644
--- a/doc/board/phytec/phycore-am62x.rst
+++ b/doc/board/phytec/phycore-am62x.rst
@@ -92,9 +92,9 @@
To boot from a micro SD card on a HSFS device simply copy the following
artifacts to the FAT partition:
-* tiboot3.bin from R5 build as tiboot3.bin
-* tispl.bin_unsigned from Cortex-A build as tispl.bin
-* u-boot.img_unsigned from Cortex-A build as u-boot.img
+* tiboot3.bin from R5 build
+* tispl.bin from Cortex-A build
+* u-boot.img from Cortex-A build
Boot
----