Merge branch 'master' of git://git.denx.de/u-boot-arm
Fix a trivial conflict in arch/arm/dts/exynos5250.dtsi about gpio and
serial.
Conflicts:
arch/arm/dts/exynos5250.dtsi
Signed-off-by: Tom Rini <trini@ti.com>
diff --git a/arch/arm/cpu/arm926ejs/mx27/generic.c b/arch/arm/cpu/arm926ejs/mx27/generic.c
index 41bb84b..a9a13cb 100644
--- a/arch/arm/cpu/arm926ejs/mx27/generic.c
+++ b/arch/arm/cpu/arm926ejs/mx27/generic.c
@@ -159,6 +159,8 @@
switch (clk) {
case MXC_ARM_CLK:
return imx_get_armclk();
+ case MXC_I2C_CLK:
+ return imx_get_ahbclk()/2;
case MXC_UART_CLK:
return imx_get_perclk1();
case MXC_FEC_CLK:
@@ -380,3 +382,11 @@
}
#endif /* CONFIG_MXC_MMC */
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+void enable_caches(void)
+{
+ /* Enable D-cache. I-cache is already enabled in start.S */
+ dcache_enable();
+}
+#endif /* CONFIG_SYS_DCACHE_OFF */
diff --git a/arch/arm/cpu/armv7/exynos/Makefile b/arch/arm/cpu/armv7/exynos/Makefile
index b2f9152..4661155 100644
--- a/arch/arm/cpu/armv7/exynos/Makefile
+++ b/arch/arm/cpu/armv7/exynos/Makefile
@@ -22,10 +22,19 @@
LIB = $(obj)lib$(SOC).o
-COBJS += clock.o power.o soc.o system.o pinmux.o tzpc.o
+COBJS-y += clock.o power.o soc.o system.o pinmux.o tzpc.o
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
+ifdef CONFIG_SPL_BUILD
+COBJS-$(CONFIG_EXYNOS5) += clock_init_exynos5.o
+COBJS-$(CONFIG_EXYNOS5) += dmc_common.o dmc_init_ddr3.o
+COBJS-$(CONFIG_EXYNOS4210)+= dmc_init_exynos4.o clock_init_exynos4.o
+COBJS-y += spl_boot.o
+COBJS-y += lowlevel_init.o
+endif
+
+COBJS := $(COBJS-y)
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
all: $(obj).depend $(LIB)
diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c
index e1c4246..9f07181 100644
--- a/arch/arm/cpu/armv7/exynos/clock.c
+++ b/arch/arm/cpu/armv7/exynos/clock.c
@@ -27,6 +27,10 @@
#include <asm/arch/clk.h>
#include <asm/arch/periph.h>
+#define PLL_DIV_1024 1024
+#define PLL_DIV_65535 65535
+#define PLL_DIV_65536 65536
+
/* *
* This structure is to store the src bit, div bit and prediv bit
* positions of the peripheral clocks of the src and div registers
@@ -85,6 +89,7 @@
static int exynos_get_pll_clk(int pllreg, unsigned int r, unsigned int k)
{
unsigned long m, p, s = 0, mask, fout;
+ unsigned int div;
unsigned int freq;
/*
* APLL_CON: MIDV [25:16]
@@ -110,14 +115,42 @@
if (pllreg == EPLL) {
k = k & 0xffff;
/* FOUT = (MDIV + K / 65536) * FIN / (PDIV * 2^SDIV) */
- fout = (m + k / 65536) * (freq / (p * (1 << s)));
+ fout = (m + k / PLL_DIV_65536) * (freq / (p * (1 << s)));
} else if (pllreg == VPLL) {
k = k & 0xfff;
- /* FOUT = (MDIV + K / 1024) * FIN / (PDIV * 2^SDIV) */
- fout = (m + k / 1024) * (freq / (p * (1 << s)));
+
+ /*
+ * Exynos4210
+ * FOUT = (MDIV + K / 1024) * FIN / (PDIV * 2^SDIV)
+ *
+ * Exynos4412
+ * FOUT = (MDIV + K / 65535) * FIN / (PDIV * 2^SDIV)
+ *
+ * Exynos5250
+ * FOUT = (MDIV + K / 65536) * FIN / (PDIV * 2^SDIV)
+ */
+ if (proid_is_exynos4210())
+ div = PLL_DIV_1024;
+ else if (proid_is_exynos4412())
+ div = PLL_DIV_65535;
+ else if (proid_is_exynos5250())
+ div = PLL_DIV_65536;
+ else
+ return 0;
+
+ fout = (m + k / div) * (freq / (p * (1 << s)));
} else {
- /* FOUT = MDIV * FIN / (PDIV * 2^SDIV) */
- fout = m * (freq / (p * (1 << s)));
+ /*
+ * Exynos4210
+ * FOUT = MDIV * FIN / (PDIV * 2^SDIV)
+ *
+ * Exynos4412 / Exynos5250
+ * FOUT = MDIV * FIN / (PDIV * 2^(SDIV-1))
+ */
+ if (proid_is_exynos4210())
+ fout = m * (freq / (p * (1 << s)));
+ else
+ fout = m * (freq / (p * (1 << (s - 1))));
}
return fout;
diff --git a/arch/arm/cpu/armv7/exynos/clock_init.h b/arch/arm/cpu/armv7/exynos/clock_init.h
new file mode 100644
index 0000000..20a1d47
--- /dev/null
+++ b/arch/arm/cpu/armv7/exynos/clock_init.h
@@ -0,0 +1,154 @@
+/*
+ * Clock initialization routines
+ *
+ * Copyright (c) 2011 The Chromium OS Authors.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __EXYNOS_CLOCK_INIT_H
+#define __EXYNOS_CLOCK_INIT_H
+
+enum {
+ MEM_TIMINGS_MSR_COUNT = 4,
+};
+
+/* These are the ratio's for configuring ARM clock */
+struct arm_clk_ratios {
+ unsigned arm_freq_mhz; /* Frequency of ARM core in MHz */
+
+ unsigned apll_mdiv;
+ unsigned apll_pdiv;
+ unsigned apll_sdiv;
+
+ unsigned arm2_ratio;
+ unsigned apll_ratio;
+ unsigned pclk_dbg_ratio;
+ unsigned atb_ratio;
+ unsigned periph_ratio;
+ unsigned acp_ratio;
+ unsigned cpud_ratio;
+ unsigned arm_ratio;
+};
+
+/* These are the memory timings for a particular memory type and speed */
+struct mem_timings {
+ enum mem_manuf mem_manuf; /* Memory manufacturer */
+ enum ddr_mode mem_type; /* Memory type */
+ unsigned frequency_mhz; /* Frequency of memory in MHz */
+
+ /* Here follow the timing parameters for the selected memory */
+ unsigned apll_mdiv;
+ unsigned apll_pdiv;
+ unsigned apll_sdiv;
+ unsigned mpll_mdiv;
+ unsigned mpll_pdiv;
+ unsigned mpll_sdiv;
+ unsigned cpll_mdiv;
+ unsigned cpll_pdiv;
+ unsigned cpll_sdiv;
+ unsigned gpll_mdiv;
+ unsigned gpll_pdiv;
+ unsigned gpll_sdiv;
+ unsigned epll_mdiv;
+ unsigned epll_pdiv;
+ unsigned epll_sdiv;
+ unsigned vpll_mdiv;
+ unsigned vpll_pdiv;
+ unsigned vpll_sdiv;
+ unsigned bpll_mdiv;
+ unsigned bpll_pdiv;
+ unsigned bpll_sdiv;
+ unsigned pclk_cdrex_ratio;
+ unsigned direct_cmd_msr[MEM_TIMINGS_MSR_COUNT];
+
+ unsigned timing_ref;
+ unsigned timing_row;
+ unsigned timing_data;
+ unsigned timing_power;
+
+ /* DQS, DQ, DEBUG offsets */
+ unsigned phy0_dqs;
+ unsigned phy1_dqs;
+ unsigned phy0_dq;
+ unsigned phy1_dq;
+ unsigned phy0_tFS;
+ unsigned phy1_tFS;
+ unsigned phy0_pulld_dqs;
+ unsigned phy1_pulld_dqs;
+
+ unsigned lpddr3_ctrl_phy_reset;
+ unsigned ctrl_start_point;
+ unsigned ctrl_inc;
+ unsigned ctrl_start;
+ unsigned ctrl_dll_on;
+ unsigned ctrl_ref;
+
+ unsigned ctrl_force;
+ unsigned ctrl_rdlat;
+ unsigned ctrl_bstlen;
+
+ unsigned fp_resync;
+ unsigned iv_size;
+ unsigned dfi_init_start;
+ unsigned aref_en;
+
+ unsigned rd_fetch;
+
+ unsigned zq_mode_dds;
+ unsigned zq_mode_term;
+ unsigned zq_mode_noterm; /* 1 to allow termination disable */
+
+ unsigned memcontrol;
+ unsigned memconfig;
+
+ unsigned membaseconfig0;
+ unsigned membaseconfig1;
+ unsigned prechconfig_tp_cnt;
+ unsigned dpwrdn_cyc;
+ unsigned dsref_cyc;
+ unsigned concontrol;
+ /* Channel and Chip Selection */
+ uint8_t dmc_channels; /* number of memory channels */
+ uint8_t chips_per_channel; /* number of chips per channel */
+ uint8_t chips_to_configure; /* number of chips to configure */
+ uint8_t send_zq_init; /* 1 to send this command */
+ unsigned impedance; /* drive strength impedeance */
+ uint8_t gate_leveling_enable; /* check gate leveling is enabled */
+};
+
+/**
+ * Get the correct memory timings for our selected memory type and speed.
+ *
+ * This function can be called from SPL or the main U-Boot.
+ *
+ * @return pointer to the memory timings that we should use
+ */
+struct mem_timings *clock_get_mem_timings(void);
+
+/*
+ * Initialize clock for the device
+ */
+void system_clock_init(void);
+
+/*
+ * Set clock divisor value for booting from EMMC.
+ */
+void emmc_boot_clk_div_set(void);
+#endif
diff --git a/arch/arm/cpu/armv7/exynos/clock_init_exynos4.c b/arch/arm/cpu/armv7/exynos/clock_init_exynos4.c
new file mode 100644
index 0000000..3161090
--- /dev/null
+++ b/arch/arm/cpu/armv7/exynos/clock_init_exynos4.c
@@ -0,0 +1,95 @@
+/*
+ * Clock Initialization for board based on EXYNOS4210
+ *
+ * Copyright (C) 2013 Samsung Electronics
+ * Rajeshwari Shinde <rajeshwari.s@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <config.h>
+#include <version.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/clock.h>
+#include "common_setup.h"
+#include "exynos4_setup.h"
+
+/*
+ * system_clock_init: Initialize core clock and bus clock.
+ * void system_clock_init(void)
+ */
+void system_clock_init(void)
+{
+ struct exynos4_clock *clk =
+ (struct exynos4_clock *)samsung_get_base_clock();
+
+ writel(CLK_SRC_CPU_VAL, &clk->src_cpu);
+
+ sdelay(0x10000);
+
+ writel(CLK_SRC_TOP0_VAL, &clk->src_top0);
+ writel(CLK_SRC_TOP1_VAL, &clk->src_top1);
+ writel(CLK_SRC_DMC_VAL, &clk->src_dmc);
+ writel(CLK_SRC_LEFTBUS_VAL, &clk->src_leftbus);
+ writel(CLK_SRC_RIGHTBUS_VAL, &clk->src_rightbus);
+ writel(CLK_SRC_FSYS_VAL, &clk->src_fsys);
+ writel(CLK_SRC_PERIL0_VAL, &clk->src_peril0);
+ writel(CLK_SRC_CAM_VAL, &clk->src_cam);
+ writel(CLK_SRC_MFC_VAL, &clk->src_mfc);
+ writel(CLK_SRC_G3D_VAL, &clk->src_g3d);
+ writel(CLK_SRC_LCD0_VAL, &clk->src_lcd0);
+
+ sdelay(0x10000);
+
+ writel(CLK_DIV_CPU0_VAL, &clk->div_cpu0);
+ writel(CLK_DIV_CPU1_VAL, &clk->div_cpu1);
+ writel(CLK_DIV_DMC0_VAL, &clk->div_dmc0);
+ writel(CLK_DIV_DMC1_VAL, &clk->div_dmc1);
+ writel(CLK_DIV_LEFTBUS_VAL, &clk->div_leftbus);
+ writel(CLK_DIV_RIGHTBUS_VAL, &clk->div_rightbus);
+ writel(CLK_DIV_TOP_VAL, &clk->div_top);
+ writel(CLK_DIV_FSYS1_VAL, &clk->div_fsys1);
+ writel(CLK_DIV_FSYS2_VAL, &clk->div_fsys2);
+ writel(CLK_DIV_FSYS3_VAL, &clk->div_fsys3);
+ writel(CLK_DIV_PERIL0_VAL, &clk->div_peril0);
+ writel(CLK_DIV_CAM_VAL, &clk->div_cam);
+ writel(CLK_DIV_MFC_VAL, &clk->div_mfc);
+ writel(CLK_DIV_G3D_VAL, &clk->div_g3d);
+ writel(CLK_DIV_LCD0_VAL, &clk->div_lcd0);
+
+ /* Set PLL locktime */
+ writel(PLL_LOCKTIME, &clk->apll_lock);
+ writel(PLL_LOCKTIME, &clk->mpll_lock);
+ writel(PLL_LOCKTIME, &clk->epll_lock);
+ writel(PLL_LOCKTIME, &clk->vpll_lock);
+
+ writel(APLL_CON1_VAL, &clk->apll_con1);
+ writel(APLL_CON0_VAL, &clk->apll_con0);
+ writel(MPLL_CON1_VAL, &clk->mpll_con1);
+ writel(MPLL_CON0_VAL, &clk->mpll_con0);
+ writel(EPLL_CON1_VAL, &clk->epll_con1);
+ writel(EPLL_CON0_VAL, &clk->epll_con0);
+ writel(VPLL_CON1_VAL, &clk->vpll_con1);
+ writel(VPLL_CON0_VAL, &clk->vpll_con0);
+
+ sdelay(0x30000);
+}
diff --git a/arch/arm/cpu/armv7/exynos/clock_init_exynos5.c b/arch/arm/cpu/armv7/exynos/clock_init_exynos5.c
new file mode 100644
index 0000000..0f9c572
--- /dev/null
+++ b/arch/arm/cpu/armv7/exynos/clock_init_exynos5.c
@@ -0,0 +1,684 @@
+/*
+ * Clock setup for SMDK5250 board based on EXYNOS5
+ *
+ * Copyright (C) 2012 Samsung Electronics
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <config.h>
+#include <asm/io.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/spl.h>
+#include <asm/arch/dwmmc.h>
+
+#include "clock_init.h"
+#include "common_setup.h"
+#include "exynos5_setup.h"
+
+#define FSYS1_MMC0_DIV_MASK 0xff0f
+#define FSYS1_MMC0_DIV_VAL 0x0701
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct arm_clk_ratios arm_clk_ratios[] = {
+ {
+ .arm_freq_mhz = 600,
+
+ .apll_mdiv = 0xc8,
+ .apll_pdiv = 0x4,
+ .apll_sdiv = 0x1,
+
+ .arm2_ratio = 0x0,
+ .apll_ratio = 0x1,
+ .pclk_dbg_ratio = 0x1,
+ .atb_ratio = 0x2,
+ .periph_ratio = 0x7,
+ .acp_ratio = 0x7,
+ .cpud_ratio = 0x1,
+ .arm_ratio = 0x0,
+ }, {
+ .arm_freq_mhz = 800,
+
+ .apll_mdiv = 0x64,
+ .apll_pdiv = 0x3,
+ .apll_sdiv = 0x0,
+
+ .arm2_ratio = 0x0,
+ .apll_ratio = 0x1,
+ .pclk_dbg_ratio = 0x1,
+ .atb_ratio = 0x3,
+ .periph_ratio = 0x7,
+ .acp_ratio = 0x7,
+ .cpud_ratio = 0x2,
+ .arm_ratio = 0x0,
+ }, {
+ .arm_freq_mhz = 1000,
+
+ .apll_mdiv = 0x7d,
+ .apll_pdiv = 0x3,
+ .apll_sdiv = 0x0,
+
+ .arm2_ratio = 0x0,
+ .apll_ratio = 0x1,
+ .pclk_dbg_ratio = 0x1,
+ .atb_ratio = 0x4,
+ .periph_ratio = 0x7,
+ .acp_ratio = 0x7,
+ .cpud_ratio = 0x2,
+ .arm_ratio = 0x0,
+ }, {
+ .arm_freq_mhz = 1200,
+
+ .apll_mdiv = 0x96,
+ .apll_pdiv = 0x3,
+ .apll_sdiv = 0x0,
+
+ .arm2_ratio = 0x0,
+ .apll_ratio = 0x3,
+ .pclk_dbg_ratio = 0x1,
+ .atb_ratio = 0x5,
+ .periph_ratio = 0x7,
+ .acp_ratio = 0x7,
+ .cpud_ratio = 0x3,
+ .arm_ratio = 0x0,
+ }, {
+ .arm_freq_mhz = 1400,
+
+ .apll_mdiv = 0xaf,
+ .apll_pdiv = 0x3,
+ .apll_sdiv = 0x0,
+
+ .arm2_ratio = 0x0,
+ .apll_ratio = 0x3,
+ .pclk_dbg_ratio = 0x1,
+ .atb_ratio = 0x6,
+ .periph_ratio = 0x7,
+ .acp_ratio = 0x7,
+ .cpud_ratio = 0x3,
+ .arm_ratio = 0x0,
+ }, {
+ .arm_freq_mhz = 1700,
+
+ .apll_mdiv = 0x1a9,
+ .apll_pdiv = 0x6,
+ .apll_sdiv = 0x0,
+
+ .arm2_ratio = 0x0,
+ .apll_ratio = 0x3,
+ .pclk_dbg_ratio = 0x1,
+ .atb_ratio = 0x6,
+ .periph_ratio = 0x7,
+ .acp_ratio = 0x7,
+ .cpud_ratio = 0x3,
+ .arm_ratio = 0x0,
+ }
+};
+struct mem_timings mem_timings[] = {
+ {
+ .mem_manuf = MEM_MANUF_ELPIDA,
+ .mem_type = DDR_MODE_DDR3,
+ .frequency_mhz = 800,
+ .mpll_mdiv = 0xc8,
+ .mpll_pdiv = 0x3,
+ .mpll_sdiv = 0x0,
+ .cpll_mdiv = 0xde,
+ .cpll_pdiv = 0x4,
+ .cpll_sdiv = 0x2,
+ .gpll_mdiv = 0x215,
+ .gpll_pdiv = 0xc,
+ .gpll_sdiv = 0x1,
+ .epll_mdiv = 0x60,
+ .epll_pdiv = 0x3,
+ .epll_sdiv = 0x3,
+ .vpll_mdiv = 0x96,
+ .vpll_pdiv = 0x3,
+ .vpll_sdiv = 0x2,
+
+ .bpll_mdiv = 0x64,
+ .bpll_pdiv = 0x3,
+ .bpll_sdiv = 0x0,
+ .pclk_cdrex_ratio = 0x5,
+ .direct_cmd_msr = {
+ 0x00020018, 0x00030000, 0x00010042, 0x00000d70
+ },
+ .timing_ref = 0x000000bb,
+ .timing_row = 0x8c36650e,
+ .timing_data = 0x3630580b,
+ .timing_power = 0x41000a44,
+ .phy0_dqs = 0x08080808,
+ .phy1_dqs = 0x08080808,
+ .phy0_dq = 0x08080808,
+ .phy1_dq = 0x08080808,
+ .phy0_tFS = 0x4,
+ .phy1_tFS = 0x4,
+ .phy0_pulld_dqs = 0xf,
+ .phy1_pulld_dqs = 0xf,
+
+ .lpddr3_ctrl_phy_reset = 0x1,
+ .ctrl_start_point = 0x10,
+ .ctrl_inc = 0x10,
+ .ctrl_start = 0x1,
+ .ctrl_dll_on = 0x1,
+ .ctrl_ref = 0x8,
+
+ .ctrl_force = 0x1a,
+ .ctrl_rdlat = 0x0b,
+ .ctrl_bstlen = 0x08,
+
+ .fp_resync = 0x8,
+ .iv_size = 0x7,
+ .dfi_init_start = 1,
+ .aref_en = 1,
+
+ .rd_fetch = 0x3,
+
+ .zq_mode_dds = 0x7,
+ .zq_mode_term = 0x1,
+ .zq_mode_noterm = 0,
+
+ /*
+ * Dynamic Clock: Always Running
+ * Memory Burst length: 8
+ * Number of chips: 1
+ * Memory Bus width: 32 bit
+ * Memory Type: DDR3
+ * Additional Latancy for PLL: 0 Cycle
+ */
+ .memcontrol = DMC_MEMCONTROL_CLK_STOP_DISABLE |
+ DMC_MEMCONTROL_DPWRDN_DISABLE |
+ DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE |
+ DMC_MEMCONTROL_TP_DISABLE |
+ DMC_MEMCONTROL_DSREF_ENABLE |
+ DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(0) |
+ DMC_MEMCONTROL_MEM_TYPE_DDR3 |
+ DMC_MEMCONTROL_MEM_WIDTH_32BIT |
+ DMC_MEMCONTROL_NUM_CHIP_1 |
+ DMC_MEMCONTROL_BL_8 |
+ DMC_MEMCONTROL_PZQ_DISABLE |
+ DMC_MEMCONTROL_MRR_BYTE_7_0,
+ .memconfig = DMC_MEMCONFIGX_CHIP_MAP_INTERLEAVED |
+ DMC_MEMCONFIGX_CHIP_COL_10 |
+ DMC_MEMCONFIGX_CHIP_ROW_15 |
+ DMC_MEMCONFIGX_CHIP_BANK_8,
+ .membaseconfig0 = DMC_MEMBASECONFIG_VAL(0x40),
+ .membaseconfig1 = DMC_MEMBASECONFIG_VAL(0x80),
+ .prechconfig_tp_cnt = 0xff,
+ .dpwrdn_cyc = 0xff,
+ .dsref_cyc = 0xffff,
+ .concontrol = DMC_CONCONTROL_DFI_INIT_START_DISABLE |
+ DMC_CONCONTROL_TIMEOUT_LEVEL0 |
+ DMC_CONCONTROL_RD_FETCH_DISABLE |
+ DMC_CONCONTROL_EMPTY_DISABLE |
+ DMC_CONCONTROL_AREF_EN_DISABLE |
+ DMC_CONCONTROL_IO_PD_CON_DISABLE,
+ .dmc_channels = 2,
+ .chips_per_channel = 2,
+ .chips_to_configure = 1,
+ .send_zq_init = 1,
+ .impedance = IMP_OUTPUT_DRV_30_OHM,
+ .gate_leveling_enable = 0,
+ }, {
+ .mem_manuf = MEM_MANUF_SAMSUNG,
+ .mem_type = DDR_MODE_DDR3,
+ .frequency_mhz = 800,
+ .mpll_mdiv = 0xc8,
+ .mpll_pdiv = 0x3,
+ .mpll_sdiv = 0x0,
+ .cpll_mdiv = 0xde,
+ .cpll_pdiv = 0x4,
+ .cpll_sdiv = 0x2,
+ .gpll_mdiv = 0x215,
+ .gpll_pdiv = 0xc,
+ .gpll_sdiv = 0x1,
+ .epll_mdiv = 0x60,
+ .epll_pdiv = 0x3,
+ .epll_sdiv = 0x3,
+ .vpll_mdiv = 0x96,
+ .vpll_pdiv = 0x3,
+ .vpll_sdiv = 0x2,
+
+ .bpll_mdiv = 0x64,
+ .bpll_pdiv = 0x3,
+ .bpll_sdiv = 0x0,
+ .pclk_cdrex_ratio = 0x5,
+ .direct_cmd_msr = {
+ 0x00020018, 0x00030000, 0x00010000, 0x00000d70
+ },
+ .timing_ref = 0x000000bb,
+ .timing_row = 0x8c36650e,
+ .timing_data = 0x3630580b,
+ .timing_power = 0x41000a44,
+ .phy0_dqs = 0x08080808,
+ .phy1_dqs = 0x08080808,
+ .phy0_dq = 0x08080808,
+ .phy1_dq = 0x08080808,
+ .phy0_tFS = 0x8,
+ .phy1_tFS = 0x8,
+ .phy0_pulld_dqs = 0xf,
+ .phy1_pulld_dqs = 0xf,
+
+ .lpddr3_ctrl_phy_reset = 0x1,
+ .ctrl_start_point = 0x10,
+ .ctrl_inc = 0x10,
+ .ctrl_start = 0x1,
+ .ctrl_dll_on = 0x1,
+ .ctrl_ref = 0x8,
+
+ .ctrl_force = 0x1a,
+ .ctrl_rdlat = 0x0b,
+ .ctrl_bstlen = 0x08,
+
+ .fp_resync = 0x8,
+ .iv_size = 0x7,
+ .dfi_init_start = 1,
+ .aref_en = 1,
+
+ .rd_fetch = 0x3,
+
+ .zq_mode_dds = 0x5,
+ .zq_mode_term = 0x1,
+ .zq_mode_noterm = 1,
+
+ /*
+ * Dynamic Clock: Always Running
+ * Memory Burst length: 8
+ * Number of chips: 1
+ * Memory Bus width: 32 bit
+ * Memory Type: DDR3
+ * Additional Latancy for PLL: 0 Cycle
+ */
+ .memcontrol = DMC_MEMCONTROL_CLK_STOP_DISABLE |
+ DMC_MEMCONTROL_DPWRDN_DISABLE |
+ DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE |
+ DMC_MEMCONTROL_TP_DISABLE |
+ DMC_MEMCONTROL_DSREF_ENABLE |
+ DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(0) |
+ DMC_MEMCONTROL_MEM_TYPE_DDR3 |
+ DMC_MEMCONTROL_MEM_WIDTH_32BIT |
+ DMC_MEMCONTROL_NUM_CHIP_1 |
+ DMC_MEMCONTROL_BL_8 |
+ DMC_MEMCONTROL_PZQ_DISABLE |
+ DMC_MEMCONTROL_MRR_BYTE_7_0,
+ .memconfig = DMC_MEMCONFIGX_CHIP_MAP_INTERLEAVED |
+ DMC_MEMCONFIGX_CHIP_COL_10 |
+ DMC_MEMCONFIGX_CHIP_ROW_15 |
+ DMC_MEMCONFIGX_CHIP_BANK_8,
+ .membaseconfig0 = DMC_MEMBASECONFIG_VAL(0x40),
+ .membaseconfig1 = DMC_MEMBASECONFIG_VAL(0x80),
+ .prechconfig_tp_cnt = 0xff,
+ .dpwrdn_cyc = 0xff,
+ .dsref_cyc = 0xffff,
+ .concontrol = DMC_CONCONTROL_DFI_INIT_START_DISABLE |
+ DMC_CONCONTROL_TIMEOUT_LEVEL0 |
+ DMC_CONCONTROL_RD_FETCH_DISABLE |
+ DMC_CONCONTROL_EMPTY_DISABLE |
+ DMC_CONCONTROL_AREF_EN_DISABLE |
+ DMC_CONCONTROL_IO_PD_CON_DISABLE,
+ .dmc_channels = 2,
+ .chips_per_channel = 2,
+ .chips_to_configure = 1,
+ .send_zq_init = 1,
+ .impedance = IMP_OUTPUT_DRV_40_OHM,
+ .gate_leveling_enable = 1,
+ }
+};
+
+/**
+ * Get the required memory type and speed (SPL version).
+ *
+ * In SPL we have no device tree, so we use the machine parameters
+ *
+ * @param mem_type Returns memory type
+ * @param frequency_mhz Returns memory speed in MHz
+ * @param arm_freq Returns ARM clock speed in MHz
+ * @param mem_manuf Return Memory Manufacturer name
+ */
+static void clock_get_mem_selection(enum ddr_mode *mem_type,
+ unsigned *frequency_mhz, unsigned *arm_freq,
+ enum mem_manuf *mem_manuf)
+{
+ struct spl_machine_param *params;
+
+ params = spl_get_machine_params();
+ *mem_type = params->mem_type;
+ *frequency_mhz = params->frequency_mhz;
+ *arm_freq = params->arm_freq_mhz;
+ *mem_manuf = params->mem_manuf;
+}
+
+/* Get the ratios for setting ARM clock */
+struct arm_clk_ratios *get_arm_ratios(void)
+{
+ struct arm_clk_ratios *arm_ratio;
+ enum ddr_mode mem_type;
+ enum mem_manuf mem_manuf;
+ unsigned frequency_mhz, arm_freq;
+ int i;
+
+ clock_get_mem_selection(&mem_type, &frequency_mhz,
+ &arm_freq, &mem_manuf);
+
+ for (i = 0, arm_ratio = arm_clk_ratios; i < ARRAY_SIZE(arm_clk_ratios);
+ i++, arm_ratio++) {
+ if (arm_ratio->arm_freq_mhz == arm_freq)
+ return arm_ratio;
+ }
+
+ /* will hang if failed to find clock ratio */
+ while (1)
+ ;
+
+ return NULL;
+}
+
+struct mem_timings *clock_get_mem_timings(void)
+{
+ struct mem_timings *mem;
+ enum ddr_mode mem_type;
+ enum mem_manuf mem_manuf;
+ unsigned frequency_mhz, arm_freq;
+ int i;
+
+ clock_get_mem_selection(&mem_type, &frequency_mhz,
+ &arm_freq, &mem_manuf);
+ for (i = 0, mem = mem_timings; i < ARRAY_SIZE(mem_timings);
+ i++, mem++) {
+ if (mem->mem_type == mem_type &&
+ mem->frequency_mhz == frequency_mhz &&
+ mem->mem_manuf == mem_manuf)
+ return mem;
+ }
+
+ /* will hang if failed to find memory timings */
+ while (1)
+ ;
+
+ return NULL;
+}
+
+void system_clock_init()
+{
+ struct exynos5_clock *clk =
+ (struct exynos5_clock *)samsung_get_base_clock();
+ struct mem_timings *mem;
+ struct arm_clk_ratios *arm_clk_ratio;
+ u32 val, tmp;
+
+ mem = clock_get_mem_timings();
+ arm_clk_ratio = get_arm_ratios();
+
+ clrbits_le32(&clk->src_cpu, MUX_APLL_SEL_MASK);
+ do {
+ val = readl(&clk->mux_stat_cpu);
+ } while ((val | MUX_APLL_SEL_MASK) != val);
+
+ clrbits_le32(&clk->src_core1, MUX_MPLL_SEL_MASK);
+ do {
+ val = readl(&clk->mux_stat_core1);
+ } while ((val | MUX_MPLL_SEL_MASK) != val);
+
+ clrbits_le32(&clk->src_top2, MUX_CPLL_SEL_MASK);
+ clrbits_le32(&clk->src_top2, MUX_EPLL_SEL_MASK);
+ clrbits_le32(&clk->src_top2, MUX_VPLL_SEL_MASK);
+ clrbits_le32(&clk->src_top2, MUX_GPLL_SEL_MASK);
+ tmp = MUX_CPLL_SEL_MASK | MUX_EPLL_SEL_MASK | MUX_VPLL_SEL_MASK
+ | MUX_GPLL_SEL_MASK;
+ do {
+ val = readl(&clk->mux_stat_top2);
+ } while ((val | tmp) != val);
+
+ clrbits_le32(&clk->src_cdrex, MUX_BPLL_SEL_MASK);
+ do {
+ val = readl(&clk->mux_stat_cdrex);
+ } while ((val | MUX_BPLL_SEL_MASK) != val);
+
+ /* PLL locktime */
+ writel(APLL_LOCK_VAL, &clk->apll_lock);
+
+ writel(MPLL_LOCK_VAL, &clk->mpll_lock);
+
+ writel(BPLL_LOCK_VAL, &clk->bpll_lock);
+
+ writel(CPLL_LOCK_VAL, &clk->cpll_lock);
+
+ writel(GPLL_LOCK_VAL, &clk->gpll_lock);
+
+ writel(EPLL_LOCK_VAL, &clk->epll_lock);
+
+ writel(VPLL_LOCK_VAL, &clk->vpll_lock);
+
+ writel(CLK_REG_DISABLE, &clk->pll_div2_sel);
+
+ writel(MUX_HPM_SEL_MASK, &clk->src_cpu);
+ do {
+ val = readl(&clk->mux_stat_cpu);
+ } while ((val | HPM_SEL_SCLK_MPLL) != val);
+
+ val = arm_clk_ratio->arm2_ratio << 28
+ | arm_clk_ratio->apll_ratio << 24
+ | arm_clk_ratio->pclk_dbg_ratio << 20
+ | arm_clk_ratio->atb_ratio << 16
+ | arm_clk_ratio->periph_ratio << 12
+ | arm_clk_ratio->acp_ratio << 8
+ | arm_clk_ratio->cpud_ratio << 4
+ | arm_clk_ratio->arm_ratio;
+ writel(val, &clk->div_cpu0);
+ do {
+ val = readl(&clk->div_stat_cpu0);
+ } while (0 != val);
+
+ writel(CLK_DIV_CPU1_VAL, &clk->div_cpu1);
+ do {
+ val = readl(&clk->div_stat_cpu1);
+ } while (0 != val);
+
+ /* Set APLL */
+ writel(APLL_CON1_VAL, &clk->apll_con1);
+ val = set_pll(arm_clk_ratio->apll_mdiv, arm_clk_ratio->apll_pdiv,
+ arm_clk_ratio->apll_sdiv);
+ writel(val, &clk->apll_con0);
+ while ((readl(&clk->apll_con0) & APLL_CON0_LOCKED) == 0)
+ ;
+
+ /* Set MPLL */
+ writel(MPLL_CON1_VAL, &clk->mpll_con1);
+ val = set_pll(mem->mpll_mdiv, mem->mpll_pdiv, mem->mpll_sdiv);
+ writel(val, &clk->mpll_con0);
+ while ((readl(&clk->mpll_con0) & MPLL_CON0_LOCKED) == 0)
+ ;
+
+ /* Set BPLL */
+ writel(BPLL_CON1_VAL, &clk->bpll_con1);
+ val = set_pll(mem->bpll_mdiv, mem->bpll_pdiv, mem->bpll_sdiv);
+ writel(val, &clk->bpll_con0);
+ while ((readl(&clk->bpll_con0) & BPLL_CON0_LOCKED) == 0)
+ ;
+
+ /* Set CPLL */
+ writel(CPLL_CON1_VAL, &clk->cpll_con1);
+ val = set_pll(mem->cpll_mdiv, mem->cpll_pdiv, mem->cpll_sdiv);
+ writel(val, &clk->cpll_con0);
+ while ((readl(&clk->cpll_con0) & CPLL_CON0_LOCKED) == 0)
+ ;
+
+ /* Set GPLL */
+ writel(GPLL_CON1_VAL, &clk->gpll_con1);
+ val = set_pll(mem->gpll_mdiv, mem->gpll_pdiv, mem->gpll_sdiv);
+ writel(val, &clk->gpll_con0);
+ while ((readl(&clk->gpll_con0) & GPLL_CON0_LOCKED) == 0)
+ ;
+
+ /* Set EPLL */
+ writel(EPLL_CON2_VAL, &clk->epll_con2);
+ writel(EPLL_CON1_VAL, &clk->epll_con1);
+ val = set_pll(mem->epll_mdiv, mem->epll_pdiv, mem->epll_sdiv);
+ writel(val, &clk->epll_con0);
+ while ((readl(&clk->epll_con0) & EPLL_CON0_LOCKED) == 0)
+ ;
+
+ /* Set VPLL */
+ writel(VPLL_CON2_VAL, &clk->vpll_con2);
+ writel(VPLL_CON1_VAL, &clk->vpll_con1);
+ val = set_pll(mem->vpll_mdiv, mem->vpll_pdiv, mem->vpll_sdiv);
+ writel(val, &clk->vpll_con0);
+ while ((readl(&clk->vpll_con0) & VPLL_CON0_LOCKED) == 0)
+ ;
+
+ writel(CLK_SRC_CORE0_VAL, &clk->src_core0);
+ writel(CLK_DIV_CORE0_VAL, &clk->div_core0);
+ while (readl(&clk->div_stat_core0) != 0)
+ ;
+
+ writel(CLK_DIV_CORE1_VAL, &clk->div_core1);
+ while (readl(&clk->div_stat_core1) != 0)
+ ;
+
+ writel(CLK_DIV_SYSRGT_VAL, &clk->div_sysrgt);
+ while (readl(&clk->div_stat_sysrgt) != 0)
+ ;
+
+ writel(CLK_DIV_ACP_VAL, &clk->div_acp);
+ while (readl(&clk->div_stat_acp) != 0)
+ ;
+
+ writel(CLK_DIV_SYSLFT_VAL, &clk->div_syslft);
+ while (readl(&clk->div_stat_syslft) != 0)
+ ;
+
+ writel(CLK_SRC_TOP0_VAL, &clk->src_top0);
+ writel(CLK_SRC_TOP1_VAL, &clk->src_top1);
+ writel(TOP2_VAL, &clk->src_top2);
+ writel(CLK_SRC_TOP3_VAL, &clk->src_top3);
+
+ writel(CLK_DIV_TOP0_VAL, &clk->div_top0);
+ while (readl(&clk->div_stat_top0))
+ ;
+
+ writel(CLK_DIV_TOP1_VAL, &clk->div_top1);
+ while (readl(&clk->div_stat_top1))
+ ;
+
+ writel(CLK_SRC_LEX_VAL, &clk->src_lex);
+ while (1) {
+ val = readl(&clk->mux_stat_lex);
+ if (val == (val | 1))
+ break;
+ }
+
+ writel(CLK_DIV_LEX_VAL, &clk->div_lex);
+ while (readl(&clk->div_stat_lex))
+ ;
+
+ writel(CLK_DIV_R0X_VAL, &clk->div_r0x);
+ while (readl(&clk->div_stat_r0x))
+ ;
+
+ writel(CLK_DIV_R0X_VAL, &clk->div_r0x);
+ while (readl(&clk->div_stat_r0x))
+ ;
+
+ writel(CLK_DIV_R1X_VAL, &clk->div_r1x);
+ while (readl(&clk->div_stat_r1x))
+ ;
+
+ writel(CLK_REG_DISABLE, &clk->src_cdrex);
+
+ writel(CLK_DIV_CDREX_VAL, &clk->div_cdrex);
+ while (readl(&clk->div_stat_cdrex))
+ ;
+
+ val = readl(&clk->src_cpu);
+ val |= CLK_SRC_CPU_VAL;
+ writel(val, &clk->src_cpu);
+
+ val = readl(&clk->src_top2);
+ val |= CLK_SRC_TOP2_VAL;
+ writel(val, &clk->src_top2);
+
+ val = readl(&clk->src_core1);
+ val |= CLK_SRC_CORE1_VAL;
+ writel(val, &clk->src_core1);
+
+ writel(CLK_SRC_FSYS0_VAL, &clk->src_fsys);
+ writel(CLK_DIV_FSYS0_VAL, &clk->div_fsys0);
+ while (readl(&clk->div_stat_fsys0))
+ ;
+
+ writel(CLK_REG_DISABLE, &clk->clkout_cmu_cpu);
+ writel(CLK_REG_DISABLE, &clk->clkout_cmu_core);
+ writel(CLK_REG_DISABLE, &clk->clkout_cmu_acp);
+ writel(CLK_REG_DISABLE, &clk->clkout_cmu_top);
+ writel(CLK_REG_DISABLE, &clk->clkout_cmu_lex);
+ writel(CLK_REG_DISABLE, &clk->clkout_cmu_r0x);
+ writel(CLK_REG_DISABLE, &clk->clkout_cmu_r1x);
+ writel(CLK_REG_DISABLE, &clk->clkout_cmu_cdrex);
+
+ writel(CLK_SRC_PERIC0_VAL, &clk->src_peric0);
+ writel(CLK_DIV_PERIC0_VAL, &clk->div_peric0);
+
+ writel(CLK_SRC_PERIC1_VAL, &clk->src_peric1);
+ writel(CLK_DIV_PERIC1_VAL, &clk->div_peric1);
+ writel(CLK_DIV_PERIC2_VAL, &clk->div_peric2);
+ writel(CLK_DIV_PERIC3_VAL, &clk->div_peric3);
+
+ writel(SCLK_SRC_ISP_VAL, &clk->sclk_src_isp);
+ writel(SCLK_DIV_ISP_VAL, &clk->sclk_div_isp);
+ writel(CLK_DIV_ISP0_VAL, &clk->div_isp0);
+ writel(CLK_DIV_ISP1_VAL, &clk->div_isp1);
+ writel(CLK_DIV_ISP2_VAL, &clk->div_isp2);
+
+ /* FIMD1 SRC CLK SELECTION */
+ writel(CLK_SRC_DISP1_0_VAL, &clk->src_disp1_0);
+
+ val = MMC2_PRE_RATIO_VAL << MMC2_PRE_RATIO_OFFSET
+ | MMC2_RATIO_VAL << MMC2_RATIO_OFFSET
+ | MMC3_PRE_RATIO_VAL << MMC3_PRE_RATIO_OFFSET
+ | MMC3_RATIO_VAL << MMC3_RATIO_OFFSET;
+ writel(val, &clk->div_fsys2);
+}
+
+void clock_init_dp_clock(void)
+{
+ struct exynos5_clock *clk =
+ (struct exynos5_clock *)samsung_get_base_clock();
+
+ /* DP clock enable */
+ setbits_le32(&clk->gate_ip_disp1, CLK_GATE_DP1_ALLOW);
+
+ /* We run DP at 267 Mhz */
+ setbits_le32(&clk->div_disp1_0, CLK_DIV_DISP1_0_FIMD1);
+}
+
+/*
+ * Set clock divisor value for booting from EMMC.
+ * Set DWMMC channel-0 clk div to operate mmc0 device at 50MHz.
+ */
+void emmc_boot_clk_div_set(void)
+{
+ struct exynos5_clock *clk =
+ (struct exynos5_clock *)samsung_get_base_clock();
+ unsigned int div_mmc;
+
+ div_mmc = readl((unsigned int) &clk->div_fsys1) & ~FSYS1_MMC0_DIV_MASK;
+ div_mmc |= FSYS1_MMC0_DIV_VAL;
+ writel(div_mmc, (unsigned int) &clk->div_fsys1);
+}
diff --git a/arch/arm/cpu/armv7/exynos/common_setup.h b/arch/arm/cpu/armv7/exynos/common_setup.h
new file mode 100644
index 0000000..e6318c0
--- /dev/null
+++ b/arch/arm/cpu/armv7/exynos/common_setup.h
@@ -0,0 +1,45 @@
+/*
+ * Common APIs for EXYNOS based board
+ *
+ * Copyright (C) 2013 Samsung Electronics
+ * Rajeshwari Shinde <rajeshwari.s@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#define DMC_OFFSET 0x10000
+
+/*
+ * Memory initialization
+ *
+ * @param reset Reset PHY during initialization.
+ */
+void mem_ctrl_init(int reset);
+
+ /* System Clock initialization */
+void system_clock_init(void);
+
+/*
+ * Init subsystems according to the reset status
+ *
+ * @return 0 for a normal boot, non-zero for a resume
+ */
+int do_lowlevel_init(void);
+
+void sdelay(unsigned long);
diff --git a/arch/arm/cpu/armv7/exynos/dmc_common.c b/arch/arm/cpu/armv7/exynos/dmc_common.c
new file mode 100644
index 0000000..645f57e
--- /dev/null
+++ b/arch/arm/cpu/armv7/exynos/dmc_common.c
@@ -0,0 +1,200 @@
+/*
+ * Mem setup common file for different types of DDR present on SMDK5250 boards.
+ *
+ * Copyright (C) 2012 Samsung Electronics
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/spl.h>
+
+#include "clock_init.h"
+#include "common_setup.h"
+#include "exynos5_setup.h"
+
+#define ZQ_INIT_TIMEOUT 10000
+
+int dmc_config_zq(struct mem_timings *mem,
+ struct exynos5_phy_control *phy0_ctrl,
+ struct exynos5_phy_control *phy1_ctrl)
+{
+ unsigned long val = 0;
+ int i;
+
+ /*
+ * ZQ Calibration:
+ * Select Driver Strength,
+ * long calibration for manual calibration
+ */
+ val = PHY_CON16_RESET_VAL;
+ val |= mem->zq_mode_dds << PHY_CON16_ZQ_MODE_DDS_SHIFT;
+ val |= mem->zq_mode_term << PHY_CON16_ZQ_MODE_TERM_SHIFT;
+ val |= ZQ_CLK_DIV_EN;
+ writel(val, &phy0_ctrl->phy_con16);
+ writel(val, &phy1_ctrl->phy_con16);
+
+ /* Disable termination */
+ if (mem->zq_mode_noterm)
+ val |= PHY_CON16_ZQ_MODE_NOTERM_MASK;
+ writel(val, &phy0_ctrl->phy_con16);
+ writel(val, &phy1_ctrl->phy_con16);
+
+ /* ZQ_MANUAL_START: Enable */
+ val |= ZQ_MANUAL_STR;
+ writel(val, &phy0_ctrl->phy_con16);
+ writel(val, &phy1_ctrl->phy_con16);
+
+ /* ZQ_MANUAL_START: Disable */
+ val &= ~ZQ_MANUAL_STR;
+
+ /*
+ * Since we are manaully calibrating the ZQ values,
+ * we are looping for the ZQ_init to complete.
+ */
+ i = ZQ_INIT_TIMEOUT;
+ while ((readl(&phy0_ctrl->phy_con17) & ZQ_DONE) != ZQ_DONE && i > 0) {
+ sdelay(100);
+ i--;
+ }
+ if (!i)
+ return -1;
+ writel(val, &phy0_ctrl->phy_con16);
+
+ i = ZQ_INIT_TIMEOUT;
+ while ((readl(&phy1_ctrl->phy_con17) & ZQ_DONE) != ZQ_DONE && i > 0) {
+ sdelay(100);
+ i--;
+ }
+ if (!i)
+ return -1;
+ writel(val, &phy1_ctrl->phy_con16);
+
+ return 0;
+}
+
+void update_reset_dll(struct exynos5_dmc *dmc, enum ddr_mode mode)
+{
+ unsigned long val;
+
+ if (mode == DDR_MODE_DDR3) {
+ val = MEM_TERM_EN | PHY_TERM_EN | DMC_CTRL_SHGATE;
+ writel(val, &dmc->phycontrol0);
+ }
+
+ /* Update DLL Information: Force DLL Resyncronization */
+ val = readl(&dmc->phycontrol0);
+ val |= FP_RSYNC;
+ writel(val, &dmc->phycontrol0);
+
+ /* Reset Force DLL Resyncronization */
+ val = readl(&dmc->phycontrol0);
+ val &= ~FP_RSYNC;
+ writel(val, &dmc->phycontrol0);
+}
+
+void dmc_config_mrs(struct mem_timings *mem, struct exynos5_dmc *dmc)
+{
+ int channel, chip;
+
+ for (channel = 0; channel < mem->dmc_channels; channel++) {
+ unsigned long mask;
+
+ mask = channel << DIRECT_CMD_CHANNEL_SHIFT;
+ for (chip = 0; chip < mem->chips_to_configure; chip++) {
+ int i;
+
+ mask |= chip << DIRECT_CMD_CHIP_SHIFT;
+
+ /* Sending NOP command */
+ writel(DIRECT_CMD_NOP | mask, &dmc->directcmd);
+
+ /*
+ * TODO(alim.akhtar@samsung.com): Do we need these
+ * delays? This one and the next were not there for
+ * DDR3.
+ */
+ sdelay(0x10000);
+
+ /* Sending EMRS/MRS commands */
+ for (i = 0; i < MEM_TIMINGS_MSR_COUNT; i++) {
+ writel(mem->direct_cmd_msr[i] | mask,
+ &dmc->directcmd);
+ sdelay(0x10000);
+ }
+
+ if (mem->send_zq_init) {
+ /* Sending ZQINIT command */
+ writel(DIRECT_CMD_ZQINIT | mask,
+ &dmc->directcmd);
+
+ sdelay(10000);
+ }
+ }
+ }
+}
+
+void dmc_config_prech(struct mem_timings *mem, struct exynos5_dmc *dmc)
+{
+ int channel, chip;
+
+ for (channel = 0; channel < mem->dmc_channels; channel++) {
+ unsigned long mask;
+
+ mask = channel << DIRECT_CMD_CHANNEL_SHIFT;
+ for (chip = 0; chip < mem->chips_per_channel; chip++) {
+ mask |= chip << DIRECT_CMD_CHIP_SHIFT;
+
+ /* PALL (all banks precharge) CMD */
+ writel(DIRECT_CMD_PALL | mask, &dmc->directcmd);
+ sdelay(0x10000);
+ }
+ }
+}
+
+void dmc_config_memory(struct mem_timings *mem, struct exynos5_dmc *dmc)
+{
+ writel(mem->memconfig, &dmc->memconfig0);
+ writel(mem->memconfig, &dmc->memconfig1);
+ writel(DMC_MEMBASECONFIG0_VAL, &dmc->membaseconfig0);
+ writel(DMC_MEMBASECONFIG1_VAL, &dmc->membaseconfig1);
+}
+
+void mem_ctrl_init(int reset)
+{
+ struct spl_machine_param *param = spl_get_machine_params();
+ struct mem_timings *mem;
+ int ret;
+
+ mem = clock_get_mem_timings();
+
+ /* If there are any other memory variant, add their init call below */
+ if (param->mem_type == DDR_MODE_DDR3) {
+ ret = ddr3_mem_ctrl_init(mem, param->mem_iv_size, reset);
+ if (ret) {
+ /* will hang if failed to init memory control */
+ while (1)
+ ;
+ }
+ } else {
+ /* will hang if unknow memory type */
+ while (1)
+ ;
+ }
+}
diff --git a/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c b/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c
new file mode 100644
index 0000000..e03d74b
--- /dev/null
+++ b/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c
@@ -0,0 +1,233 @@
+/*
+ * DDR3 mem setup file for SMDK5250 board based on EXYNOS5
+ *
+ * Copyright (C) 2012 Samsung Electronics
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/dmc.h>
+#include "common_setup.h"
+#include "exynos5_setup.h"
+#include "clock_init.h"
+
+#define RDLVL_COMPLETE_TIMEOUT 10000
+
+static void reset_phy_ctrl(void)
+{
+ struct exynos5_clock *clk =
+ (struct exynos5_clock *)samsung_get_base_clock();
+
+ writel(DDR3PHY_CTRL_PHY_RESET_OFF, &clk->lpddr3phy_ctrl);
+ writel(DDR3PHY_CTRL_PHY_RESET, &clk->lpddr3phy_ctrl);
+}
+
+int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
+ int reset)
+{
+ unsigned int val;
+ struct exynos5_phy_control *phy0_ctrl, *phy1_ctrl;
+ struct exynos5_dmc *dmc;
+ int i;
+
+ phy0_ctrl = (struct exynos5_phy_control *)samsung_get_base_dmc_phy();
+ phy1_ctrl = (struct exynos5_phy_control *)(samsung_get_base_dmc_phy()
+ + DMC_OFFSET);
+ dmc = (struct exynos5_dmc *)samsung_get_base_dmc_ctrl();
+
+ if (reset)
+ reset_phy_ctrl();
+
+ /* Set Impedance Output Driver */
+ val = (mem->impedance << CA_CK_DRVR_DS_OFFSET) |
+ (mem->impedance << CA_CKE_DRVR_DS_OFFSET) |
+ (mem->impedance << CA_CS_DRVR_DS_OFFSET) |
+ (mem->impedance << CA_ADR_DRVR_DS_OFFSET);
+ writel(val, &phy0_ctrl->phy_con39);
+ writel(val, &phy1_ctrl->phy_con39);
+
+ /* Set Read Latency and Burst Length for PHY0 and PHY1 */
+ val = (mem->ctrl_bstlen << PHY_CON42_CTRL_BSTLEN_SHIFT) |
+ (mem->ctrl_rdlat << PHY_CON42_CTRL_RDLAT_SHIFT);
+ writel(val, &phy0_ctrl->phy_con42);
+ writel(val, &phy1_ctrl->phy_con42);
+
+ /* ZQ Calibration */
+ if (dmc_config_zq(mem, phy0_ctrl, phy1_ctrl))
+ return SETUP_ERR_ZQ_CALIBRATION_FAILURE;
+
+ /* DQ Signal */
+ writel(mem->phy0_pulld_dqs, &phy0_ctrl->phy_con14);
+ writel(mem->phy1_pulld_dqs, &phy1_ctrl->phy_con14);
+
+ writel(mem->concontrol | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT)
+ | (mem->dfi_init_start << CONCONTROL_DFI_INIT_START_SHIFT),
+ &dmc->concontrol);
+
+ update_reset_dll(dmc, DDR_MODE_DDR3);
+
+ /* DQS Signal */
+ writel(mem->phy0_dqs, &phy0_ctrl->phy_con4);
+ writel(mem->phy1_dqs, &phy1_ctrl->phy_con4);
+
+ writel(mem->phy0_dq, &phy0_ctrl->phy_con6);
+ writel(mem->phy1_dq, &phy1_ctrl->phy_con6);
+
+ writel(mem->phy0_tFS, &phy0_ctrl->phy_con10);
+ writel(mem->phy1_tFS, &phy1_ctrl->phy_con10);
+
+ val = (mem->ctrl_start_point << PHY_CON12_CTRL_START_POINT_SHIFT) |
+ (mem->ctrl_inc << PHY_CON12_CTRL_INC_SHIFT) |
+ (mem->ctrl_dll_on << PHY_CON12_CTRL_DLL_ON_SHIFT) |
+ (mem->ctrl_ref << PHY_CON12_CTRL_REF_SHIFT);
+ writel(val, &phy0_ctrl->phy_con12);
+ writel(val, &phy1_ctrl->phy_con12);
+
+ /* Start DLL locking */
+ writel(val | (mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT),
+ &phy0_ctrl->phy_con12);
+ writel(val | (mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT),
+ &phy1_ctrl->phy_con12);
+
+ update_reset_dll(dmc, DDR_MODE_DDR3);
+
+ writel(mem->concontrol | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT),
+ &dmc->concontrol);
+
+ /* Memory Channel Inteleaving Size */
+ writel(mem->iv_size, &dmc->ivcontrol);
+
+ writel(mem->memconfig, &dmc->memconfig0);
+ writel(mem->memconfig, &dmc->memconfig1);
+ writel(mem->membaseconfig0, &dmc->membaseconfig0);
+ writel(mem->membaseconfig1, &dmc->membaseconfig1);
+
+ /* Precharge Configuration */
+ writel(mem->prechconfig_tp_cnt << PRECHCONFIG_TP_CNT_SHIFT,
+ &dmc->prechconfig);
+
+ /* Power Down mode Configuration */
+ writel(mem->dpwrdn_cyc << PWRDNCONFIG_DPWRDN_CYC_SHIFT |
+ mem->dsref_cyc << PWRDNCONFIG_DSREF_CYC_SHIFT,
+ &dmc->pwrdnconfig);
+
+ /* TimingRow, TimingData, TimingPower and Timingaref
+ * values as per Memory AC parameters
+ */
+ writel(mem->timing_ref, &dmc->timingref);
+ writel(mem->timing_row, &dmc->timingrow);
+ writel(mem->timing_data, &dmc->timingdata);
+ writel(mem->timing_power, &dmc->timingpower);
+
+ /* Send PALL command */
+ dmc_config_prech(mem, dmc);
+
+ /* Send NOP, MRS and ZQINIT commands */
+ dmc_config_mrs(mem, dmc);
+
+ if (mem->gate_leveling_enable) {
+ val = PHY_CON0_RESET_VAL;
+ val |= P0_CMD_EN;
+ writel(val, &phy0_ctrl->phy_con0);
+ writel(val, &phy1_ctrl->phy_con0);
+
+ val = PHY_CON2_RESET_VAL;
+ val |= INIT_DESKEW_EN;
+ writel(val, &phy0_ctrl->phy_con2);
+ writel(val, &phy1_ctrl->phy_con2);
+
+ val = PHY_CON0_RESET_VAL;
+ val |= P0_CMD_EN;
+ val |= BYTE_RDLVL_EN;
+ writel(val, &phy0_ctrl->phy_con0);
+ writel(val, &phy1_ctrl->phy_con0);
+
+ val = (mem->ctrl_start_point <<
+ PHY_CON12_CTRL_START_POINT_SHIFT) |
+ (mem->ctrl_inc << PHY_CON12_CTRL_INC_SHIFT) |
+ (mem->ctrl_force << PHY_CON12_CTRL_FORCE_SHIFT) |
+ (mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT) |
+ (mem->ctrl_ref << PHY_CON12_CTRL_REF_SHIFT);
+ writel(val, &phy0_ctrl->phy_con12);
+ writel(val, &phy1_ctrl->phy_con12);
+
+ val = PHY_CON2_RESET_VAL;
+ val |= INIT_DESKEW_EN;
+ val |= RDLVL_GATE_EN;
+ writel(val, &phy0_ctrl->phy_con2);
+ writel(val, &phy1_ctrl->phy_con2);
+
+ val = PHY_CON0_RESET_VAL;
+ val |= P0_CMD_EN;
+ val |= BYTE_RDLVL_EN;
+ val |= CTRL_SHGATE;
+ writel(val, &phy0_ctrl->phy_con0);
+ writel(val, &phy1_ctrl->phy_con0);
+
+ val = PHY_CON1_RESET_VAL;
+ val &= ~(CTRL_GATEDURADJ_MASK);
+ writel(val, &phy0_ctrl->phy_con1);
+ writel(val, &phy1_ctrl->phy_con1);
+
+ writel(CTRL_RDLVL_GATE_ENABLE, &dmc->rdlvl_config);
+ i = RDLVL_COMPLETE_TIMEOUT;
+ while ((readl(&dmc->phystatus) &
+ (RDLVL_COMPLETE_CHO | RDLVL_COMPLETE_CH1)) !=
+ (RDLVL_COMPLETE_CHO | RDLVL_COMPLETE_CH1) && i > 0) {
+ /*
+ * TODO(waihong): Comment on how long this take to
+ * timeout
+ */
+ sdelay(100);
+ i--;
+ }
+ if (!i)
+ return SETUP_ERR_RDLV_COMPLETE_TIMEOUT;
+ writel(CTRL_RDLVL_GATE_DISABLE, &dmc->rdlvl_config);
+
+ writel(0, &phy0_ctrl->phy_con14);
+ writel(0, &phy1_ctrl->phy_con14);
+
+ val = (mem->ctrl_start_point <<
+ PHY_CON12_CTRL_START_POINT_SHIFT) |
+ (mem->ctrl_inc << PHY_CON12_CTRL_INC_SHIFT) |
+ (mem->ctrl_force << PHY_CON12_CTRL_FORCE_SHIFT) |
+ (mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT) |
+ (mem->ctrl_dll_on << PHY_CON12_CTRL_DLL_ON_SHIFT) |
+ (mem->ctrl_ref << PHY_CON12_CTRL_REF_SHIFT);
+ writel(val, &phy0_ctrl->phy_con12);
+ writel(val, &phy1_ctrl->phy_con12);
+
+ update_reset_dll(dmc, DDR_MODE_DDR3);
+ }
+
+ /* Send PALL command */
+ dmc_config_prech(mem, dmc);
+
+ writel(mem->memcontrol, &dmc->memcontrol);
+
+ /* Set DMC Concontrol and enable auto-refresh counter */
+ writel(mem->concontrol | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT)
+ | (mem->aref_en << CONCONTROL_AREF_EN_SHIFT), &dmc->concontrol);
+ return 0;
+}
diff --git a/arch/arm/cpu/armv7/exynos/dmc_init_exynos4.c b/arch/arm/cpu/armv7/exynos/dmc_init_exynos4.c
new file mode 100644
index 0000000..ecddc72
--- /dev/null
+++ b/arch/arm/cpu/armv7/exynos/dmc_init_exynos4.c
@@ -0,0 +1,213 @@
+/*
+ * Memory setup for board based on EXYNOS4210
+ *
+ * Copyright (C) 2013 Samsung Electronics
+ * Rajeshwari Shinde <rajeshwari.s@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <asm/arch/dmc.h>
+#include "common_setup.h"
+#include "exynos4_setup.h"
+
+struct mem_timings mem = {
+ .direct_cmd_msr = {
+ DIRECT_CMD1, DIRECT_CMD2, DIRECT_CMD3, DIRECT_CMD4
+ },
+ .timingref = TIMINGREF_VAL,
+ .timingrow = TIMINGROW_VAL,
+ .timingdata = TIMINGDATA_VAL,
+ .timingpower = TIMINGPOWER_VAL,
+ .zqcontrol = ZQ_CONTROL_VAL,
+ .control0 = CONTROL0_VAL,
+ .control1 = CONTROL1_VAL,
+ .control2 = CONTROL2_VAL,
+ .concontrol = CONCONTROL_VAL,
+ .prechconfig = PRECHCONFIG,
+ .memcontrol = MEMCONTROL_VAL,
+ .memconfig0 = MEMCONFIG0_VAL,
+ .memconfig1 = MEMCONFIG1_VAL,
+ .dll_resync = FORCE_DLL_RESYNC,
+ .dll_on = DLL_CONTROL_ON,
+};
+static void phy_control_reset(int ctrl_no, struct exynos4_dmc *dmc)
+{
+ if (ctrl_no) {
+ writel((mem.control1 | (1 << mem.dll_resync)),
+ &dmc->phycontrol1);
+ writel((mem.control1 | (0 << mem.dll_resync)),
+ &dmc->phycontrol1);
+ } else {
+ writel((mem.control0 | (0 << mem.dll_on)),
+ &dmc->phycontrol0);
+ writel((mem.control0 | (1 << mem.dll_on)),
+ &dmc->phycontrol0);
+ }
+}
+
+static void dmc_config_mrs(struct exynos4_dmc *dmc, int chip)
+{
+ int i;
+ unsigned long mask = 0;
+
+ if (chip)
+ mask = DIRECT_CMD_CHIP1_SHIFT;
+
+ for (i = 0; i < MEM_TIMINGS_MSR_COUNT; i++) {
+ writel(mem.direct_cmd_msr[i] | mask,
+ &dmc->directcmd);
+ }
+}
+
+static void dmc_init(struct exynos4_dmc *dmc)
+{
+ /*
+ * DLL Parameter Setting:
+ * Termination: Enable R/W
+ * Phase Delay for DQS Cleaning: 180' Shift
+ */
+ writel(mem.control1, &dmc->phycontrol1);
+
+ /*
+ * ZQ Calibration
+ * Termination: Disable
+ * Auto Calibration Start: Enable
+ */
+ writel(mem.zqcontrol, &dmc->phyzqcontrol);
+ sdelay(0x100000);
+
+ /*
+ * Update DLL Information:
+ * Force DLL Resyncronization
+ */
+ phy_control_reset(1, dmc);
+ phy_control_reset(0, dmc);
+
+ /* Set DLL Parameters */
+ writel(mem.control1, &dmc->phycontrol1);
+
+ /* DLL Start */
+ writel((mem.control0 | CTRL_START | CTRL_DLL_ON), &dmc->phycontrol0);
+
+ writel(mem.control2, &dmc->phycontrol2);
+
+ /* Set Clock Ratio of Bus clock to Memory Clock */
+ writel(mem.concontrol, &dmc->concontrol);
+
+ /*
+ * Memor Burst length: 8
+ * Number of chips: 2
+ * Memory Bus width: 32 bit
+ * Memory Type: DDR3
+ * Additional Latancy for PLL: 1 Cycle
+ */
+ writel(mem.memcontrol, &dmc->memcontrol);
+
+ writel(mem.memconfig0, &dmc->memconfig0);
+ writel(mem.memconfig1, &dmc->memconfig1);
+
+ /* Config Precharge Policy */
+ writel(mem.prechconfig, &dmc->prechconfig);
+ /*
+ * TimingAref, TimingRow, TimingData, TimingPower Setting:
+ * Values as per Memory AC Parameters
+ */
+ writel(mem.timingref, &dmc->timingref);
+ writel(mem.timingrow, &dmc->timingrow);
+ writel(mem.timingdata, &dmc->timingdata);
+ writel(mem.timingpower, &dmc->timingpower);
+
+ /* Chip0: NOP Command: Assert and Hold CKE to high level */
+ writel(DIRECT_CMD_NOP, &dmc->directcmd);
+ sdelay(0x100000);
+
+ /* Chip0: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */
+ dmc_config_mrs(dmc, 0);
+ sdelay(0x100000);
+
+ /* Chip0: ZQINIT */
+ writel(DIRECT_CMD_ZQ, &dmc->directcmd);
+ sdelay(0x100000);
+
+ writel((DIRECT_CMD_NOP | DIRECT_CMD_CHIP1_SHIFT), &dmc->directcmd);
+ sdelay(0x100000);
+
+ /* Chip1: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */
+ dmc_config_mrs(dmc, 1);
+ sdelay(0x100000);
+
+ /* Chip1: ZQINIT */
+ writel((DIRECT_CMD_ZQ | DIRECT_CMD_CHIP1_SHIFT), &dmc->directcmd);
+ sdelay(0x100000);
+
+ phy_control_reset(1, dmc);
+ sdelay(0x100000);
+
+ /* turn on DREX0, DREX1 */
+ writel((mem.concontrol | AREF_EN), &dmc->concontrol);
+}
+
+void mem_ctrl_init(int reset)
+{
+ struct exynos4_dmc *dmc;
+
+ /*
+ * Async bridge configuration at CPU_core:
+ * 1: half_sync
+ * 0: full_sync
+ */
+ writel(1, ASYNC_CONFIG);
+#ifdef CONFIG_ORIGEN
+ /* Interleave: 2Bit, Interleave_bit1: 0x15, Interleave_bit0: 0x7 */
+ writel(APB_SFR_INTERLEAVE_CONF_VAL, EXYNOS4_MIU_BASE +
+ APB_SFR_INTERLEAVE_CONF_OFFSET);
+ /* Update MIU Configuration */
+ writel(APB_SFR_ARBRITATION_CONF_VAL, EXYNOS4_MIU_BASE +
+ APB_SFR_ARBRITATION_CONF_OFFSET);
+#else
+ writel(APB_SFR_INTERLEAVE_CONF_VAL, EXYNOS4_MIU_BASE +
+ APB_SFR_INTERLEAVE_CONF_OFFSET);
+ writel(INTERLEAVE_ADDR_MAP_START_ADDR, EXYNOS4_MIU_BASE +
+ ABP_SFR_INTERLEAVE_ADDRMAP_START_OFFSET);
+ writel(INTERLEAVE_ADDR_MAP_END_ADDR, EXYNOS4_MIU_BASE +
+ ABP_SFR_INTERLEAVE_ADDRMAP_END_OFFSET);
+ writel(INTERLEAVE_ADDR_MAP_EN, EXYNOS4_MIU_BASE +
+ ABP_SFR_SLV_ADDRMAP_CONF_OFFSET);
+#ifdef CONFIG_MIU_LINEAR
+ writel(SLAVE0_SINGLE_ADDR_MAP_START_ADDR, EXYNOS4_MIU_BASE +
+ ABP_SFR_SLV0_SINGLE_ADDRMAP_START_OFFSET);
+ writel(SLAVE0_SINGLE_ADDR_MAP_END_ADDR, EXYNOS4_MIU_BASE +
+ ABP_SFR_SLV0_SINGLE_ADDRMAP_END_OFFSET);
+ writel(SLAVE1_SINGLE_ADDR_MAP_START_ADDR, EXYNOS4_MIU_BASE +
+ ABP_SFR_SLV1_SINGLE_ADDRMAP_START_OFFSET);
+ writel(SLAVE1_SINGLE_ADDR_MAP_END_ADDR, EXYNOS4_MIU_BASE +
+ ABP_SFR_SLV1_SINGLE_ADDRMAP_END_OFFSET);
+ writel(APB_SFR_SLV_ADDR_MAP_CONF_VAL, EXYNOS4_MIU_BASE +
+ ABP_SFR_SLV_ADDRMAP_CONF_OFFSET);
+#endif
+#endif
+ /* DREX0 */
+ dmc = (struct exynos4_dmc *)samsung_get_base_dmc_ctrl();
+ dmc_init(dmc);
+ dmc = (struct exynos4_dmc *)(samsung_get_base_dmc_ctrl()
+ + DMC_OFFSET);
+ dmc_init(dmc);
+}
diff --git a/arch/arm/cpu/armv7/exynos/exynos4_setup.h b/arch/arm/cpu/armv7/exynos/exynos4_setup.h
new file mode 100644
index 0000000..6d25058
--- /dev/null
+++ b/arch/arm/cpu/armv7/exynos/exynos4_setup.h
@@ -0,0 +1,594 @@
+/*
+ * Machine Specific Values for EXYNOS4012 based board
+ *
+ * Copyright (C) 2011 Samsung Electronics
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _ORIGEN_SETUP_H
+#define _ORIGEN_SETUP_H
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/cpu.h>
+
+#ifdef CONFIG_CLK_800_330_165
+#define DRAM_CLK_330
+#endif
+#ifdef CONFIG_CLK_1000_200_200
+#define DRAM_CLK_200
+#endif
+#ifdef CONFIG_CLK_1000_330_165
+#define DRAM_CLK_330
+#endif
+#ifdef CONFIG_CLK_1000_400_200
+#define DRAM_CLK_400
+#endif
+
+/* Bus Configuration Register Address */
+#define ASYNC_CONFIG 0x10010350
+
+/* CLK_SRC_CPU */
+#define MUX_HPM_SEL_MOUTAPLL 0x0
+#define MUX_HPM_SEL_SCLKMPLL 0x1
+#define MUX_CORE_SEL_MOUTAPLL 0x0
+#define MUX_CORE_SEL_SCLKMPLL 0x1
+#define MUX_MPLL_SEL_FILPLL 0x0
+#define MUX_MPLL_SEL_MOUTMPLLFOUT 0x1
+#define MUX_APLL_SEL_FILPLL 0x0
+#define MUX_APLL_SEL_MOUTMPLLFOUT 0x1
+#define CLK_SRC_CPU_VAL ((MUX_HPM_SEL_MOUTAPLL << 20) \
+ | (MUX_CORE_SEL_MOUTAPLL << 16) \
+ | (MUX_MPLL_SEL_MOUTMPLLFOUT << 8)\
+ | (MUX_APLL_SEL_MOUTMPLLFOUT << 0))
+
+/* CLK_DIV_CPU0 */
+#define APLL_RATIO 0x0
+#define PCLK_DBG_RATIO 0x1
+#define ATB_RATIO 0x3
+#define PERIPH_RATIO 0x3
+#define COREM1_RATIO 0x7
+#define COREM0_RATIO 0x3
+#define CORE_RATIO 0x0
+#define CLK_DIV_CPU0_VAL ((APLL_RATIO << 24) \
+ | (PCLK_DBG_RATIO << 20) \
+ | (ATB_RATIO << 16) \
+ | (PERIPH_RATIO << 12) \
+ | (COREM1_RATIO << 8) \
+ | (COREM0_RATIO << 4) \
+ | (CORE_RATIO << 0))
+
+/* CLK_DIV_CPU1 */
+#define HPM_RATIO 0x0
+#define COPY_RATIO 0x3
+#define CLK_DIV_CPU1_VAL ((HPM_RATIO << 4) | (COPY_RATIO))
+
+/* CLK_SRC_DMC */
+#define MUX_PWI_SEL_XXTI 0x0
+#define MUX_PWI_SEL_XUSBXTI 0x1
+#define MUX_PWI_SEL_SCLK_HDMI24M 0x2
+#define MUX_PWI_SEL_SCLK_USBPHY0 0x3
+#define MUX_PWI_SEL_SCLK_USBPHY1 0x4
+#define MUX_PWI_SEL_SCLK_HDMIPHY 0x5
+#define MUX_PWI_SEL_SCLKMPLL 0x6
+#define MUX_PWI_SEL_SCLKEPLL 0x7
+#define MUX_PWI_SEL_SCLKVPLL 0x8
+#define MUX_DPHY_SEL_SCLKMPLL 0x0
+#define MUX_DPHY_SEL_SCLKAPLL 0x1
+#define MUX_DMC_BUS_SEL_SCLKMPLL 0x0
+#define MUX_DMC_BUS_SEL_SCLKAPLL 0x1
+#define CLK_SRC_DMC_VAL ((MUX_PWI_SEL_XUSBXTI << 16) \
+ | (MUX_DPHY_SEL_SCLKMPLL << 8) \
+ | (MUX_DMC_BUS_SEL_SCLKMPLL << 4))
+
+/* CLK_DIV_DMC0 */
+#define CORE_TIMERS_RATIO 0x1
+#define COPY2_RATIO 0x3
+#define DMCP_RATIO 0x1
+#define DMCD_RATIO 0x1
+#define DMC_RATIO 0x1
+#define DPHY_RATIO 0x1
+#define ACP_PCLK_RATIO 0x1
+#define ACP_RATIO 0x3
+#define CLK_DIV_DMC0_VAL ((CORE_TIMERS_RATIO << 28) \
+ | (COPY2_RATIO << 24) \
+ | (DMCP_RATIO << 20) \
+ | (DMCD_RATIO << 16) \
+ | (DMC_RATIO << 12) \
+ | (DPHY_RATIO << 8) \
+ | (ACP_PCLK_RATIO << 4) \
+ | (ACP_RATIO << 0))
+
+/* CLK_DIV_DMC1 */
+#define DPM_RATIO 0x1
+#define DVSEM_RATIO 0x1
+#define PWI_RATIO 0x1
+#define CLK_DIV_DMC1_VAL ((DPM_RATIO << 24) \
+ | (DVSEM_RATIO << 16) \
+ | (PWI_RATIO << 8))
+
+/* CLK_SRC_TOP0 */
+#define MUX_ONENAND_SEL_ACLK_133 0x0
+#define MUX_ONENAND_SEL_ACLK_160 0x1
+#define MUX_ACLK_133_SEL_SCLKMPLL 0x0
+#define MUX_ACLK_133_SEL_SCLKAPLL 0x1
+#define MUX_ACLK_160_SEL_SCLKMPLL 0x0
+#define MUX_ACLK_160_SEL_SCLKAPLL 0x1
+#define MUX_ACLK_100_SEL_SCLKMPLL 0x0
+#define MUX_ACLK_100_SEL_SCLKAPLL 0x1
+#define MUX_ACLK_200_SEL_SCLKMPLL 0x0
+#define MUX_ACLK_200_SEL_SCLKAPLL 0x1
+#define MUX_VPLL_SEL_FINPLL 0x0
+#define MUX_VPLL_SEL_FOUTVPLL 0x1
+#define MUX_EPLL_SEL_FINPLL 0x0
+#define MUX_EPLL_SEL_FOUTEPLL 0x1
+#define MUX_ONENAND_1_SEL_MOUTONENAND 0x0
+#define MUX_ONENAND_1_SEL_SCLKVPLL 0x1
+#define CLK_SRC_TOP0_VAL ((MUX_ONENAND_SEL_ACLK_133 << 28) \
+ | (MUX_ACLK_133_SEL_SCLKMPLL << 24) \
+ | (MUX_ACLK_160_SEL_SCLKMPLL << 20) \
+ | (MUX_ACLK_100_SEL_SCLKMPLL << 16) \
+ | (MUX_ACLK_200_SEL_SCLKMPLL << 12) \
+ | (MUX_VPLL_SEL_FINPLL << 8) \
+ | (MUX_EPLL_SEL_FINPLL << 4)\
+ | (MUX_ONENAND_1_SEL_MOUTONENAND << 0))
+
+/* CLK_SRC_TOP1 */
+#define VPLLSRC_SEL_FINPLL 0x0
+#define VPLLSRC_SEL_SCLKHDMI24M 0x1
+#define CLK_SRC_TOP1_VAL (VPLLSRC_SEL_FINPLL)
+
+/* CLK_DIV_TOP */
+#define ONENAND_RATIO 0x0
+#define ACLK_133_RATIO 0x5
+#define ACLK_160_RATIO 0x4
+#define ACLK_100_RATIO 0x7
+#define ACLK_200_RATIO 0x3
+#define CLK_DIV_TOP_VAL ((ONENAND_RATIO << 16) \
+ | (ACLK_133_RATIO << 12)\
+ | (ACLK_160_RATIO << 8) \
+ | (ACLK_100_RATIO << 4) \
+ | (ACLK_200_RATIO << 0))
+
+/* CLK_SRC_LEFTBUS */
+#define MUX_GDL_SEL_SCLKMPLL 0x0
+#define MUX_GDL_SEL_SCLKAPLL 0x1
+#define CLK_SRC_LEFTBUS_VAL (MUX_GDL_SEL_SCLKMPLL)
+
+/* CLK_DIV_LEFTBUS */
+#define GPL_RATIO 0x1
+#define GDL_RATIO 0x3
+#define CLK_DIV_LEFTBUS_VAL ((GPL_RATIO << 4) | (GDL_RATIO))
+
+/* CLK_SRC_RIGHTBUS */
+#define MUX_GDR_SEL_SCLKMPLL 0x0
+#define MUX_GDR_SEL_SCLKAPLL 0x1
+#define CLK_SRC_RIGHTBUS_VAL (MUX_GDR_SEL_SCLKMPLL)
+
+/* CLK_DIV_RIGHTBUS */
+#define GPR_RATIO 0x1
+#define GDR_RATIO 0x3
+#define CLK_DIV_RIGHTBUS_VAL ((GPR_RATIO << 4) | (GDR_RATIO))
+
+/* CLK_SRS_FSYS: 6 = SCLKMPLL */
+#define SATA_SEL_SCLKMPLL 0
+#define SATA_SEL_SCLKAPLL 1
+
+#define MMC_SEL_XXTI 0
+#define MMC_SEL_XUSBXTI 1
+#define MMC_SEL_SCLK_HDMI24M 2
+#define MMC_SEL_SCLK_USBPHY0 3
+#define MMC_SEL_SCLK_USBPHY1 4
+#define MMC_SEL_SCLK_HDMIPHY 5
+#define MMC_SEL_SCLKMPLL 6
+#define MMC_SEL_SCLKEPLL 7
+#define MMC_SEL_SCLKVPLL 8
+
+#define MMCC0_SEL MMC_SEL_SCLKMPLL
+#define MMCC1_SEL MMC_SEL_SCLKMPLL
+#define MMCC2_SEL MMC_SEL_SCLKMPLL
+#define MMCC3_SEL MMC_SEL_SCLKMPLL
+#define MMCC4_SEL MMC_SEL_SCLKMPLL
+#define CLK_SRC_FSYS_VAL ((SATA_SEL_SCLKMPLL << 24) \
+ | (MMCC4_SEL << 16) \
+ | (MMCC3_SEL << 12) \
+ | (MMCC2_SEL << 8) \
+ | (MMCC1_SEL << 4) \
+ | (MMCC0_SEL << 0))
+
+/* SCLK_MMC[0-4] = MOUTMMC[0-4]/(MMC[0-4]_RATIO + 1)/(MMC[0-4]_PRE_RATIO +1) */
+/* CLK_DIV_FSYS1 */
+#define MMC0_RATIO 0xF
+#define MMC0_PRE_RATIO 0x0
+#define MMC1_RATIO 0xF
+#define MMC1_PRE_RATIO 0x0
+#define CLK_DIV_FSYS1_VAL ((MMC1_PRE_RATIO << 24) \
+ | (MMC1_RATIO << 16) \
+ | (MMC0_PRE_RATIO << 8) \
+ | (MMC0_RATIO << 0))
+
+/* CLK_DIV_FSYS2 */
+#define MMC2_RATIO 0xF
+#define MMC2_PRE_RATIO 0x0
+#define MMC3_RATIO 0xF
+#define MMC3_PRE_RATIO 0x0
+#define CLK_DIV_FSYS2_VAL ((MMC3_PRE_RATIO << 24) \
+ | (MMC3_RATIO << 16) \
+ | (MMC2_PRE_RATIO << 8) \
+ | (MMC2_RATIO << 0))
+
+/* CLK_DIV_FSYS3 */
+#define MMC4_RATIO 0xF
+#define MMC4_PRE_RATIO 0x0
+#define CLK_DIV_FSYS3_VAL ((MMC4_PRE_RATIO << 8) \
+ | (MMC4_RATIO << 0))
+
+/* CLK_SRC_PERIL0 */
+#define UART_SEL_XXTI 0
+#define UART_SEL_XUSBXTI 1
+#define UART_SEL_SCLK_HDMI24M 2
+#define UART_SEL_SCLK_USBPHY0 3
+#define UART_SEL_SCLK_USBPHY1 4
+#define UART_SEL_SCLK_HDMIPHY 5
+#define UART_SEL_SCLKMPLL 6
+#define UART_SEL_SCLKEPLL 7
+#define UART_SEL_SCLKVPLL 8
+
+#define UART0_SEL UART_SEL_SCLKMPLL
+#define UART1_SEL UART_SEL_SCLKMPLL
+#define UART2_SEL UART_SEL_SCLKMPLL
+#define UART3_SEL UART_SEL_SCLKMPLL
+#define UART4_SEL UART_SEL_SCLKMPLL
+#define CLK_SRC_PERIL0_VAL ((UART4_SEL << 16) \
+ | (UART3_SEL << 12) \
+ | (UART2_SEL << 8) \
+ | (UART1_SEL << 4) \
+ | (UART0_SEL << 0))
+
+/* SCLK_UART[0-4] = MOUTUART[0-4]/(UART[0-4]_RATIO + 1) */
+/* CLK_DIV_PERIL0 */
+#define UART0_RATIO 7
+#define UART1_RATIO 7
+#define UART2_RATIO 7
+#define UART3_RATIO 7
+#define UART4_RATIO 7
+#define CLK_DIV_PERIL0_VAL ((UART4_RATIO << 16) \
+ | (UART3_RATIO << 12) \
+ | (UART2_RATIO << 8) \
+ | (UART1_RATIO << 4) \
+ | (UART0_RATIO << 0))
+
+/* Clock Source CAM/FIMC */
+/* CLK_SRC_CAM */
+#define CAM0_SEL_XUSBXTI 1
+#define CAM1_SEL_XUSBXTI 1
+#define CSIS0_SEL_XUSBXTI 1
+#define CSIS1_SEL_XUSBXTI 1
+
+#define FIMC_SEL_SCLKMPLL 6
+#define FIMC0_LCLK_SEL FIMC_SEL_SCLKMPLL
+#define FIMC1_LCLK_SEL FIMC_SEL_SCLKMPLL
+#define FIMC2_LCLK_SEL FIMC_SEL_SCLKMPLL
+#define FIMC3_LCLK_SEL FIMC_SEL_SCLKMPLL
+
+#define CLK_SRC_CAM_VAL ((CSIS1_SEL_XUSBXTI << 28) \
+ | (CSIS0_SEL_XUSBXTI << 24) \
+ | (CAM1_SEL_XUSBXTI << 20) \
+ | (CAM0_SEL_XUSBXTI << 16) \
+ | (FIMC3_LCLK_SEL << 12) \
+ | (FIMC2_LCLK_SEL << 8) \
+ | (FIMC1_LCLK_SEL << 4) \
+ | (FIMC0_LCLK_SEL << 0))
+
+/* SCLK CAM */
+/* CLK_DIV_CAM */
+#define FIMC0_LCLK_RATIO 4
+#define FIMC1_LCLK_RATIO 4
+#define FIMC2_LCLK_RATIO 4
+#define FIMC3_LCLK_RATIO 4
+#define CLK_DIV_CAM_VAL ((FIMC3_LCLK_RATIO << 12) \
+ | (FIMC2_LCLK_RATIO << 8) \
+ | (FIMC1_LCLK_RATIO << 4) \
+ | (FIMC0_LCLK_RATIO << 0))
+
+/* SCLK MFC */
+/* CLK_SRC_MFC */
+#define MFC_SEL_MPLL 0
+#define MOUTMFC_0 0
+#define MFC_SEL MOUTMFC_0
+#define MFC_0_SEL MFC_SEL_MPLL
+#define CLK_SRC_MFC_VAL ((MFC_SEL << 8) | (MFC_0_SEL))
+
+
+/* CLK_DIV_MFC */
+#define MFC_RATIO 3
+#define CLK_DIV_MFC_VAL (MFC_RATIO)
+
+/* SCLK G3D */
+/* CLK_SRC_G3D */
+#define G3D_SEL_MPLL 0
+#define MOUTG3D_0 0
+#define G3D_SEL MOUTG3D_0
+#define G3D_0_SEL G3D_SEL_MPLL
+#define CLK_SRC_G3D_VAL ((G3D_SEL << 8) | (G3D_0_SEL))
+
+/* CLK_DIV_G3D */
+#define G3D_RATIO 1
+#define CLK_DIV_G3D_VAL (G3D_RATIO)
+
+/* SCLK LCD0 */
+/* CLK_SRC_LCD0 */
+#define FIMD_SEL_SCLKMPLL 6
+#define MDNIE0_SEL_XUSBXTI 1
+#define MDNIE_PWM0_SEL_XUSBXTI 1
+#define MIPI0_SEL_XUSBXTI 1
+#define CLK_SRC_LCD0_VAL ((MIPI0_SEL_XUSBXTI << 12) \
+ | (MDNIE_PWM0_SEL_XUSBXTI << 8) \
+ | (MDNIE0_SEL_XUSBXTI << 4) \
+ | (FIMD_SEL_SCLKMPLL << 0))
+
+/* CLK_DIV_LCD0 */
+#define FIMD0_RATIO 4
+#define CLK_DIV_LCD0_VAL (FIMD0_RATIO)
+
+/* Required period to generate a stable clock output */
+/* PLL_LOCK_TIME */
+#define PLL_LOCKTIME 0x1C20
+
+/* PLL Values */
+#define DISABLE 0
+#define ENABLE 1
+#define SET_PLL(mdiv, pdiv, sdiv) ((ENABLE << 31)\
+ | (mdiv << 16) \
+ | (pdiv << 8) \
+ | (sdiv << 0))
+
+/* APLL_CON0 */
+#define APLL_MDIV 0xFA
+#define APLL_PDIV 0x6
+#define APLL_SDIV 0x1
+#define APLL_CON0_VAL SET_PLL(APLL_MDIV, APLL_PDIV, APLL_SDIV)
+
+/* APLL_CON1 */
+#define APLL_AFC_ENB 0x1
+#define APLL_AFC 0xC
+#define APLL_CON1_VAL ((APLL_AFC_ENB << 31) | (APLL_AFC << 0))
+
+/* MPLL_CON0 */
+#define MPLL_MDIV 0xC8
+#define MPLL_PDIV 0x6
+#define MPLL_SDIV 0x1
+#define MPLL_CON0_VAL SET_PLL(MPLL_MDIV, MPLL_PDIV, MPLL_SDIV)
+
+/* MPLL_CON1 */
+#define MPLL_AFC_ENB 0x0
+#define MPLL_AFC 0x1C
+#define MPLL_CON1_VAL ((MPLL_AFC_ENB << 31) | (MPLL_AFC << 0))
+
+/* EPLL_CON0 */
+#define EPLL_MDIV 0x30
+#define EPLL_PDIV 0x3
+#define EPLL_SDIV 0x2
+#define EPLL_CON0_VAL SET_PLL(EPLL_MDIV, EPLL_PDIV, EPLL_SDIV)
+
+/* EPLL_CON1 */
+#define EPLL_K 0x0
+#define EPLL_CON1_VAL (EPLL_K >> 0)
+
+/* VPLL_CON0 */
+#define VPLL_MDIV 0x35
+#define VPLL_PDIV 0x3
+#define VPLL_SDIV 0x2
+#define VPLL_CON0_VAL SET_PLL(VPLL_MDIV, VPLL_PDIV, VPLL_SDIV)
+
+/* VPLL_CON1 */
+#define VPLL_SSCG_EN DISABLE
+#define VPLL_SEL_PF_DN_SPREAD 0x0
+#define VPLL_MRR 0x11
+#define VPLL_MFR 0x0
+#define VPLL_K 0x400
+#define VPLL_CON1_VAL ((VPLL_SSCG_EN << 31)\
+ | (VPLL_SEL_PF_DN_SPREAD << 29) \
+ | (VPLL_MRR << 24) \
+ | (VPLL_MFR << 16) \
+ | (VPLL_K << 0))
+
+/* DMC */
+#define DIRECT_CMD_NOP 0x07000000
+#define DIRECT_CMD_ZQ 0x0a000000
+#define DIRECT_CMD_CHIP1_SHIFT (1 << 20)
+#define MEM_TIMINGS_MSR_COUNT 4
+#define CTRL_START (1 << 0)
+#define CTRL_DLL_ON (1 << 1)
+#define AREF_EN (1 << 5)
+#define DRV_TYPE (1 << 6)
+
+struct mem_timings {
+ unsigned direct_cmd_msr[MEM_TIMINGS_MSR_COUNT];
+ unsigned timingref;
+ unsigned timingrow;
+ unsigned timingdata;
+ unsigned timingpower;
+ unsigned zqcontrol;
+ unsigned control0;
+ unsigned control1;
+ unsigned control2;
+ unsigned concontrol;
+ unsigned prechconfig;
+ unsigned memcontrol;
+ unsigned memconfig0;
+ unsigned memconfig1;
+ unsigned dll_resync;
+ unsigned dll_on;
+};
+
+/* MIU */
+/* MIU Config Register Offsets*/
+#define APB_SFR_INTERLEAVE_CONF_OFFSET 0x400
+#define APB_SFR_ARBRITATION_CONF_OFFSET 0xC00
+#define ABP_SFR_SLV_ADDRMAP_CONF_OFFSET 0x800
+#define ABP_SFR_INTERLEAVE_ADDRMAP_START_OFFSET 0x808
+#define ABP_SFR_INTERLEAVE_ADDRMAP_END_OFFSET 0x810
+#define ABP_SFR_SLV0_SINGLE_ADDRMAP_START_OFFSET 0x818
+#define ABP_SFR_SLV0_SINGLE_ADDRMAP_END_OFFSET 0x820
+#define ABP_SFR_SLV1_SINGLE_ADDRMAP_START_OFFSET 0x828
+#define ABP_SFR_SLV1_SINGLE_ADDRMAP_END_OFFSET 0x830
+
+#ifdef CONFIG_ORIGEN
+/* Interleave: 2Bit, Interleave_bit1: 0x15, Interleave_bit0: 0x7 */
+#define APB_SFR_INTERLEAVE_CONF_VAL 0x20001507
+#define APB_SFR_ARBRITATION_CONF_VAL 0x00000001
+#endif
+
+#define INTERLEAVE_ADDR_MAP_START_ADDR 0x40000000
+#define INTERLEAVE_ADDR_MAP_END_ADDR 0xbfffffff
+#define INTERLEAVE_ADDR_MAP_EN 0x00000001
+
+#ifdef CONFIG_MIU_1BIT_INTERLEAVED
+/* Interleave_bit0: 0xC*/
+#define APB_SFR_INTERLEAVE_CONF_VAL 0x0000000c
+#endif
+#ifdef CONFIG_MIU_2BIT_INTERLEAVED
+/* Interleave: 2Bit, Interleave_bit1: 0x15, Interleave_bit0: 0xc */
+#define APB_SFR_INTERLEAVE_CONF_VAL 0x2000150c
+#endif
+#define SLAVE0_SINGLE_ADDR_MAP_START_ADDR 0x40000000
+#define SLAVE0_SINGLE_ADDR_MAP_END_ADDR 0x7fffffff
+#define SLAVE1_SINGLE_ADDR_MAP_START_ADDR 0x80000000
+#define SLAVE1_SINGLE_ADDR_MAP_END_ADDR 0xbfffffff
+/* Enable SME0 and SME1*/
+#define APB_SFR_SLV_ADDR_MAP_CONF_VAL 0x00000006
+
+#define FORCE_DLL_RESYNC 3
+#define DLL_CONTROL_ON 1
+
+#define DIRECT_CMD1 0x00020000
+#define DIRECT_CMD2 0x00030000
+#define DIRECT_CMD3 0x00010002
+#define DIRECT_CMD4 0x00000328
+
+#define CTRL_ZQ_MODE_NOTERM (0x1 << 0)
+#define CTRL_ZQ_START (0x1 << 1)
+#define CTRL_ZQ_DIV (0 << 4)
+#define CTRL_ZQ_MODE_DDS (0x7 << 8)
+#define CTRL_ZQ_MODE_TERM (0x2 << 11)
+#define CTRL_ZQ_FORCE_IMPN (0x5 << 14)
+#define CTRL_ZQ_FORCE_IMPP (0x6 << 17)
+#define CTRL_DCC (0xE38 << 20)
+#define ZQ_CONTROL_VAL (CTRL_ZQ_MODE_NOTERM | CTRL_ZQ_START\
+ | CTRL_ZQ_DIV | CTRL_ZQ_MODE_DDS\
+ | CTRL_ZQ_MODE_TERM | CTRL_ZQ_FORCE_IMPN\
+ | CTRL_ZQ_FORCE_IMPP | CTRL_DCC)
+
+#define ASYNC (0 << 0)
+#define CLK_RATIO (1 << 1)
+#define DIV_PIPE (1 << 3)
+#define AWR_ON (1 << 4)
+#define AREF_DISABLE (0 << 5)
+#define DRV_TYPE_DISABLE (0 << 6)
+#define CHIP0_NOT_EMPTY (0 << 8)
+#define CHIP1_NOT_EMPTY (0 << 9)
+#define DQ_SWAP_DISABLE (0 << 10)
+#define QOS_FAST_DISABLE (0 << 11)
+#define RD_FETCH (0x3 << 12)
+#define TIMEOUT_LEVEL0 (0xFFF << 16)
+#define CONCONTROL_VAL (ASYNC | CLK_RATIO | DIV_PIPE | AWR_ON\
+ | AREF_DISABLE | DRV_TYPE_DISABLE\
+ | CHIP0_NOT_EMPTY | CHIP1_NOT_EMPTY\
+ | DQ_SWAP_DISABLE | QOS_FAST_DISABLE\
+ | RD_FETCH | TIMEOUT_LEVEL0)
+
+#define CLK_STOP_DISABLE (0 << 1)
+#define DPWRDN_DISABLE (0 << 2)
+#define DPWRDN_TYPE (0 << 3)
+#define TP_DISABLE (0 << 4)
+#define DSREF_DIABLE (0 << 5)
+#define ADD_LAT_PALL (1 << 6)
+#define MEM_TYPE_DDR3 (0x6 << 8)
+#define MEM_WIDTH_32 (0x2 << 12)
+#define NUM_CHIP_2 (1 << 16)
+#define BL_8 (0x3 << 20)
+#define MEMCONTROL_VAL (CLK_STOP_DISABLE | DPWRDN_DISABLE\
+ | DPWRDN_TYPE | TP_DISABLE | DSREF_DIABLE\
+ | ADD_LAT_PALL | MEM_TYPE_DDR3 | MEM_WIDTH_32\
+ | NUM_CHIP_2 | BL_8)
+
+
+#define CHIP_BANK_8 (0x3 << 0)
+#define CHIP_ROW_14 (0x2 << 4)
+#define CHIP_COL_10 (0x3 << 8)
+#define CHIP_MAP_INTERLEAVED (1 << 12)
+#define CHIP_MASK (0xe0 << 16)
+#ifdef CONFIG_MIU_LINEAR
+#define CHIP0_BASE (0x40 << 24)
+#define CHIP1_BASE (0x60 << 24)
+#else
+#define CHIP0_BASE (0x20 << 24)
+#define CHIP1_BASE (0x40 << 24)
+#endif
+#define MEMCONFIG0_VAL (CHIP_BANK_8 | CHIP_ROW_14 | CHIP_COL_10\
+ | CHIP_MAP_INTERLEAVED | CHIP_MASK | CHIP0_BASE)
+#define MEMCONFIG1_VAL (CHIP_BANK_8 | CHIP_ROW_14 | CHIP_COL_10\
+ | CHIP_MAP_INTERLEAVED | CHIP_MASK | CHIP1_BASE)
+
+#define TP_CNT (0xff << 24)
+#define PRECHCONFIG TP_CNT
+
+#define CTRL_OFF (0 << 0)
+#define CTRL_DLL_OFF (0 << 1)
+#define CTRL_HALF (0 << 2)
+#define CTRL_DFDQS (1 << 3)
+#define DQS_DELAY (0 << 4)
+#define CTRL_START_POINT (0x10 << 8)
+#define CTRL_INC (0x10 << 16)
+#define CTRL_FORCE (0x71 << 24)
+#define CONTROL0_VAL (CTRL_OFF | CTRL_DLL_OFF | CTRL_HALF\
+ | CTRL_DFDQS | DQS_DELAY | CTRL_START_POINT\
+ | CTRL_INC | CTRL_FORCE)
+
+#define CTRL_SHIFTC (0x6 << 0)
+#define CTRL_REF (8 << 4)
+#define CTRL_SHGATE (1 << 29)
+#define TERM_READ_EN (1 << 30)
+#define TERM_WRITE_EN (1 << 31)
+#define CONTROL1_VAL (CTRL_SHIFTC | CTRL_REF | CTRL_SHGATE\
+ | TERM_READ_EN | TERM_WRITE_EN)
+
+#define CONTROL2_VAL 0x00000000
+
+#ifdef CONFIG_ORIGEN
+#define TIMINGREF_VAL 0x000000BB
+#define TIMINGROW_VAL 0x4046654f
+#define TIMINGDATA_VAL 0x46400506
+#define TIMINGPOWER_VAL 0x52000A3C
+#else
+#define TIMINGREF_VAL 0x000000BC
+#ifdef DRAM_CLK_330
+#define TIMINGROW_VAL 0x3545548d
+#define TIMINGDATA_VAL 0x45430506
+#define TIMINGPOWER_VAL 0x4439033c
+#endif
+#ifdef DRAM_CLK_400
+#define TIMINGROW_VAL 0x45430506
+#define TIMINGDATA_VAL 0x56500506
+#define TIMINGPOWER_VAL 0x5444033d
+#endif
+#endif
+#endif
diff --git a/arch/arm/cpu/armv7/exynos/exynos5_setup.h b/arch/arm/cpu/armv7/exynos/exynos5_setup.h
new file mode 100644
index 0000000..8f36c16
--- /dev/null
+++ b/arch/arm/cpu/armv7/exynos/exynos5_setup.h
@@ -0,0 +1,567 @@
+/*
+ * Machine Specific Values for SMDK5250 board based on EXYNOS5
+ *
+ * Copyright (C) 2012 Samsung Electronics
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _SMDK5250_SETUP_H
+#define _SMDK5250_SETUP_H
+
+#include <config.h>
+#include <asm/arch/dmc.h>
+
+/* APLL_CON1 */
+#define APLL_CON1_VAL (0x00203800)
+
+/* MPLL_CON1 */
+#define MPLL_CON1_VAL (0x00203800)
+
+/* CPLL_CON1 */
+#define CPLL_CON1_VAL (0x00203800)
+
+/* GPLL_CON1 */
+#define GPLL_CON1_VAL (0x00203800)
+
+/* EPLL_CON1, CON2 */
+#define EPLL_CON1_VAL 0x00000000
+#define EPLL_CON2_VAL 0x00000080
+
+/* VPLL_CON1, CON2 */
+#define VPLL_CON1_VAL 0x00000000
+#define VPLL_CON2_VAL 0x00000080
+
+/* BPLL_CON1 */
+#define BPLL_CON1_VAL 0x00203800
+
+/* Set PLL */
+#define set_pll(mdiv, pdiv, sdiv) (1<<31 | mdiv<<16 | pdiv<<8 | sdiv)
+
+/* CLK_SRC_CPU */
+/* 0 = MOUTAPLL, 1 = SCLKMPLL */
+#define MUX_HPM_SEL 0
+#define MUX_CPU_SEL 0
+#define MUX_APLL_SEL 1
+
+#define CLK_SRC_CPU_VAL ((MUX_HPM_SEL << 20) \
+ | (MUX_CPU_SEL << 16) \
+ | (MUX_APLL_SEL))
+
+/* MEMCONTROL register bit fields */
+#define DMC_MEMCONTROL_CLK_STOP_DISABLE (0 << 0)
+#define DMC_MEMCONTROL_DPWRDN_DISABLE (0 << 1)
+#define DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE (0 << 2)
+#define DMC_MEMCONTROL_TP_DISABLE (0 << 4)
+#define DMC_MEMCONTROL_DSREF_DISABLE (0 << 5)
+#define DMC_MEMCONTROL_DSREF_ENABLE (1 << 5)
+#define DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(x) (x << 6)
+
+#define DMC_MEMCONTROL_MEM_TYPE_LPDDR3 (7 << 8)
+#define DMC_MEMCONTROL_MEM_TYPE_DDR3 (6 << 8)
+#define DMC_MEMCONTROL_MEM_TYPE_LPDDR2 (5 << 8)
+
+#define DMC_MEMCONTROL_MEM_WIDTH_32BIT (2 << 12)
+
+#define DMC_MEMCONTROL_NUM_CHIP_1 (0 << 16)
+#define DMC_MEMCONTROL_NUM_CHIP_2 (1 << 16)
+
+#define DMC_MEMCONTROL_BL_8 (3 << 20)
+#define DMC_MEMCONTROL_BL_4 (2 << 20)
+
+#define DMC_MEMCONTROL_PZQ_DISABLE (0 << 24)
+
+#define DMC_MEMCONTROL_MRR_BYTE_7_0 (0 << 25)
+#define DMC_MEMCONTROL_MRR_BYTE_15_8 (1 << 25)
+#define DMC_MEMCONTROL_MRR_BYTE_23_16 (2 << 25)
+#define DMC_MEMCONTROL_MRR_BYTE_31_24 (3 << 25)
+
+/* MEMCONFIG0 register bit fields */
+#define DMC_MEMCONFIGX_CHIP_MAP_INTERLEAVED (1 << 12)
+#define DMC_MEMCONFIGX_CHIP_COL_10 (3 << 8)
+#define DMC_MEMCONFIGX_CHIP_ROW_14 (2 << 4)
+#define DMC_MEMCONFIGX_CHIP_ROW_15 (3 << 4)
+#define DMC_MEMCONFIGX_CHIP_BANK_8 (3 << 0)
+
+#define DMC_MEMBASECONFIGX_CHIP_BASE(x) (x << 16)
+#define DMC_MEMBASECONFIGX_CHIP_MASK(x) (x << 0)
+#define DMC_MEMBASECONFIG_VAL(x) ( \
+ DMC_MEMBASECONFIGX_CHIP_BASE(x) | \
+ DMC_MEMBASECONFIGX_CHIP_MASK(0x780) \
+)
+
+#define DMC_MEMBASECONFIG0_VAL DMC_MEMBASECONFIG_VAL(0x40)
+#define DMC_MEMBASECONFIG1_VAL DMC_MEMBASECONFIG_VAL(0x80)
+
+#define DMC_PRECHCONFIG_VAL 0xFF000000
+#define DMC_PWRDNCONFIG_VAL 0xFFFF00FF
+
+#define DMC_CONCONTROL_RESET_VAL 0x0FFF0000
+#define DFI_INIT_START (1 << 28)
+#define EMPTY (1 << 8)
+#define AREF_EN (1 << 5)
+
+#define DFI_INIT_COMPLETE_CHO (1 << 2)
+#define DFI_INIT_COMPLETE_CH1 (1 << 3)
+
+#define RDLVL_COMPLETE_CHO (1 << 14)
+#define RDLVL_COMPLETE_CH1 (1 << 15)
+
+#define CLK_STOP_EN (1 << 0)
+#define DPWRDN_EN (1 << 1)
+#define DSREF_EN (1 << 5)
+
+/* COJCONTROL register bit fields */
+#define DMC_CONCONTROL_IO_PD_CON_DISABLE (0 << 3)
+#define DMC_CONCONTROL_AREF_EN_DISABLE (0 << 5)
+#define DMC_CONCONTROL_EMPTY_DISABLE (0 << 8)
+#define DMC_CONCONTROL_EMPTY_ENABLE (1 << 8)
+#define DMC_CONCONTROL_RD_FETCH_DISABLE (0x0 << 12)
+#define DMC_CONCONTROL_TIMEOUT_LEVEL0 (0xFFF << 16)
+#define DMC_CONCONTROL_DFI_INIT_START_DISABLE (0 << 28)
+
+/* CLK_DIV_CPU0_VAL */
+#define CLK_DIV_CPU0_VAL ((ARM2_RATIO << 28) \
+ | (APLL_RATIO << 24) \
+ | (PCLK_DBG_RATIO << 20) \
+ | (ATB_RATIO << 16) \
+ | (PERIPH_RATIO << 12) \
+ | (ACP_RATIO << 8) \
+ | (CPUD_RATIO << 4) \
+ | (ARM_RATIO))
+
+
+/* CLK_FSYS */
+#define CLK_SRC_FSYS0_VAL 0x66666
+#define CLK_DIV_FSYS0_VAL 0x0BB00000
+
+/* CLK_DIV_CPU1 */
+#define HPM_RATIO 0x2
+#define COPY_RATIO 0x0
+
+/* CLK_DIV_CPU1 = 0x00000003 */
+#define CLK_DIV_CPU1_VAL ((HPM_RATIO << 4) \
+ | (COPY_RATIO))
+
+/* CLK_SRC_CORE0 */
+#define CLK_SRC_CORE0_VAL 0x00000000
+
+/* CLK_SRC_CORE1 */
+#define CLK_SRC_CORE1_VAL 0x100
+
+/* CLK_DIV_CORE0 */
+#define CLK_DIV_CORE0_VAL 0x00120000
+
+/* CLK_DIV_CORE1 */
+#define CLK_DIV_CORE1_VAL 0x07070700
+
+/* CLK_DIV_SYSRGT */
+#define CLK_DIV_SYSRGT_VAL 0x00000111
+
+/* CLK_DIV_ACP */
+#define CLK_DIV_ACP_VAL 0x12
+
+/* CLK_DIV_SYSLFT */
+#define CLK_DIV_SYSLFT_VAL 0x00000311
+
+/* CLK_SRC_CDREX */
+#define CLK_SRC_CDREX_VAL 0x1
+
+/* CLK_DIV_CDREX */
+#define MCLK_CDREX2_RATIO 0x0
+#define ACLK_EFCON_RATIO 0x1
+#define MCLK_DPHY_RATIO 0x1
+#define MCLK_CDREX_RATIO 0x1
+#define ACLK_C2C_200_RATIO 0x1
+#define C2C_CLK_400_RATIO 0x1
+#define PCLK_CDREX_RATIO 0x1
+#define ACLK_CDREX_RATIO 0x1
+
+#define CLK_DIV_CDREX_VAL ((MCLK_DPHY_RATIO << 24) \
+ | (C2C_CLK_400_RATIO << 6) \
+ | (PCLK_CDREX_RATIO << 4) \
+ | (ACLK_CDREX_RATIO))
+
+/* CLK_SRC_TOP0 */
+#define MUX_ACLK_300_GSCL_SEL 0x0
+#define MUX_ACLK_300_GSCL_MID_SEL 0x0
+#define MUX_ACLK_400_G3D_MID_SEL 0x0
+#define MUX_ACLK_333_SEL 0x0
+#define MUX_ACLK_300_DISP1_SEL 0x0
+#define MUX_ACLK_300_DISP1_MID_SEL 0x0
+#define MUX_ACLK_200_SEL 0x0
+#define MUX_ACLK_166_SEL 0x0
+#define CLK_SRC_TOP0_VAL ((MUX_ACLK_300_GSCL_SEL << 25) \
+ | (MUX_ACLK_300_GSCL_MID_SEL << 24) \
+ | (MUX_ACLK_400_G3D_MID_SEL << 20) \
+ | (MUX_ACLK_333_SEL << 16) \
+ | (MUX_ACLK_300_DISP1_SEL << 15) \
+ | (MUX_ACLK_300_DISP1_MID_SEL << 14) \
+ | (MUX_ACLK_200_SEL << 12) \
+ | (MUX_ACLK_166_SEL << 8))
+
+/* CLK_SRC_TOP1 */
+#define MUX_ACLK_400_G3D_SEL 0x1
+#define MUX_ACLK_400_ISP_SEL 0x0
+#define MUX_ACLK_400_IOP_SEL 0x0
+#define MUX_ACLK_MIPI_HSI_TXBASE_SEL 0x0
+#define MUX_ACLK_300_GSCL_MID1_SEL 0x0
+#define MUX_ACLK_300_DISP1_MID1_SEL 0x0
+#define CLK_SRC_TOP1_VAL ((MUX_ACLK_400_G3D_SEL << 28) \
+ |(MUX_ACLK_400_ISP_SEL << 24) \
+ |(MUX_ACLK_400_IOP_SEL << 20) \
+ |(MUX_ACLK_MIPI_HSI_TXBASE_SEL << 16) \
+ |(MUX_ACLK_300_GSCL_MID1_SEL << 12) \
+ |(MUX_ACLK_300_DISP1_MID1_SEL << 8))
+
+/* CLK_SRC_TOP2 */
+#define MUX_GPLL_SEL 0x1
+#define MUX_BPLL_USER_SEL 0x0
+#define MUX_MPLL_USER_SEL 0x0
+#define MUX_VPLL_SEL 0x1
+#define MUX_EPLL_SEL 0x1
+#define MUX_CPLL_SEL 0x1
+#define VPLLSRC_SEL 0x0
+#define CLK_SRC_TOP2_VAL ((MUX_GPLL_SEL << 28) \
+ | (MUX_BPLL_USER_SEL << 24) \
+ | (MUX_MPLL_USER_SEL << 20) \
+ | (MUX_VPLL_SEL << 16) \
+ | (MUX_EPLL_SEL << 12) \
+ | (MUX_CPLL_SEL << 8) \
+ | (VPLLSRC_SEL))
+/* CLK_SRC_TOP3 */
+#define MUX_ACLK_333_SUB_SEL 0x1
+#define MUX_ACLK_400_SUB_SEL 0x1
+#define MUX_ACLK_266_ISP_SUB_SEL 0x1
+#define MUX_ACLK_266_GPS_SUB_SEL 0x0
+#define MUX_ACLK_300_GSCL_SUB_SEL 0x1
+#define MUX_ACLK_266_GSCL_SUB_SEL 0x1
+#define MUX_ACLK_300_DISP1_SUB_SEL 0x1
+#define MUX_ACLK_200_DISP1_SUB_SEL 0x1
+#define CLK_SRC_TOP3_VAL ((MUX_ACLK_333_SUB_SEL << 24) \
+ | (MUX_ACLK_400_SUB_SEL << 20) \
+ | (MUX_ACLK_266_ISP_SUB_SEL << 16) \
+ | (MUX_ACLK_266_GPS_SUB_SEL << 12) \
+ | (MUX_ACLK_300_GSCL_SUB_SEL << 10) \
+ | (MUX_ACLK_266_GSCL_SUB_SEL << 8) \
+ | (MUX_ACLK_300_DISP1_SUB_SEL << 6) \
+ | (MUX_ACLK_200_DISP1_SUB_SEL << 4))
+
+/* CLK_DIV_TOP0 */
+#define ACLK_300_DISP1_RATIO 0x2
+#define ACLK_400_G3D_RATIO 0x0
+#define ACLK_333_RATIO 0x0
+#define ACLK_266_RATIO 0x2
+#define ACLK_200_RATIO 0x3
+#define ACLK_166_RATIO 0x1
+#define ACLK_133_RATIO 0x1
+#define ACLK_66_RATIO 0x5
+
+#define CLK_DIV_TOP0_VAL ((ACLK_300_DISP1_RATIO << 28) \
+ | (ACLK_400_G3D_RATIO << 24) \
+ | (ACLK_333_RATIO << 20) \
+ | (ACLK_266_RATIO << 16) \
+ | (ACLK_200_RATIO << 12) \
+ | (ACLK_166_RATIO << 8) \
+ | (ACLK_133_RATIO << 4) \
+ | (ACLK_66_RATIO))
+
+/* CLK_DIV_TOP1 */
+#define ACLK_MIPI_HSI_TX_BASE_RATIO 0x3
+#define ACLK_66_PRE_RATIO 0x1
+#define ACLK_400_ISP_RATIO 0x1
+#define ACLK_400_IOP_RATIO 0x1
+#define ACLK_300_GSCL_RATIO 0x2
+
+#define CLK_DIV_TOP1_VAL ((ACLK_MIPI_HSI_TX_BASE_RATIO << 28) \
+ | (ACLK_66_PRE_RATIO << 24) \
+ | (ACLK_400_ISP_RATIO << 20) \
+ | (ACLK_400_IOP_RATIO << 16) \
+ | (ACLK_300_GSCL_RATIO << 12))
+
+/* APLL_LOCK */
+#define APLL_LOCK_VAL (0x546)
+/* MPLL_LOCK */
+#define MPLL_LOCK_VAL (0x546)
+/* CPLL_LOCK */
+#define CPLL_LOCK_VAL (0x546)
+/* GPLL_LOCK */
+#define GPLL_LOCK_VAL (0x546)
+/* EPLL_LOCK */
+#define EPLL_LOCK_VAL (0x3A98)
+/* VPLL_LOCK */
+#define VPLL_LOCK_VAL (0x3A98)
+/* BPLL_LOCK */
+#define BPLL_LOCK_VAL (0x546)
+
+#define MUX_APLL_SEL_MASK (1 << 0)
+#define MUX_MPLL_SEL_MASK (1 << 8)
+#define MPLL_SEL_MOUT_MPLLFOUT (2 << 8)
+#define MUX_CPLL_SEL_MASK (1 << 8)
+#define MUX_EPLL_SEL_MASK (1 << 12)
+#define MUX_VPLL_SEL_MASK (1 << 16)
+#define MUX_GPLL_SEL_MASK (1 << 28)
+#define MUX_BPLL_SEL_MASK (1 << 0)
+#define MUX_HPM_SEL_MASK (1 << 20)
+#define HPM_SEL_SCLK_MPLL (1 << 21)
+#define APLL_CON0_LOCKED (1 << 29)
+#define MPLL_CON0_LOCKED (1 << 29)
+#define BPLL_CON0_LOCKED (1 << 29)
+#define CPLL_CON0_LOCKED (1 << 29)
+#define EPLL_CON0_LOCKED (1 << 29)
+#define GPLL_CON0_LOCKED (1 << 29)
+#define VPLL_CON0_LOCKED (1 << 29)
+#define CLK_REG_DISABLE 0x0
+#define TOP2_VAL 0x0110000
+
+/* CLK_SRC_PERIC0 */
+#define PWM_SEL 6
+#define UART3_SEL 6
+#define UART2_SEL 6
+#define UART1_SEL 6
+#define UART0_SEL 6
+/* SRC_CLOCK = SCLK_MPLL */
+#define CLK_SRC_PERIC0_VAL ((PWM_SEL << 24) \
+ | (UART3_SEL << 12) \
+ | (UART2_SEL << 8) \
+ | (UART1_SEL << 4) \
+ | (UART0_SEL))
+
+/* CLK_SRC_PERIC1 */
+/* SRC_CLOCK = SCLK_MPLL */
+#define SPI0_SEL 6
+#define SPI1_SEL 6
+#define SPI2_SEL 6
+#define CLK_SRC_PERIC1_VAL ((SPI2_SEL << 24) \
+ | (SPI1_SEL << 20) \
+ | (SPI0_SEL << 16))
+
+/* SCLK_SRC_ISP - set SPI0/1 to 6 = SCLK_MPLL_USER */
+#define SPI0_ISP_SEL 6
+#define SPI1_ISP_SEL 6
+#define SCLK_SRC_ISP_VAL (SPI1_ISP_SEL << 4) \
+ | (SPI0_ISP_SEL << 0)
+
+/* SCLK_DIV_ISP - set SPI0/1 to 0xf = divide by 16 */
+#define SPI0_ISP_RATIO 0xf
+#define SPI1_ISP_RATIO 0xf
+#define SCLK_DIV_ISP_VAL (SPI1_ISP_RATIO << 12) \
+ | (SPI0_ISP_RATIO << 0)
+
+/* CLK_DIV_PERIL0 */
+#define UART5_RATIO 7
+#define UART4_RATIO 7
+#define UART3_RATIO 7
+#define UART2_RATIO 7
+#define UART1_RATIO 7
+#define UART0_RATIO 7
+
+#define CLK_DIV_PERIC0_VAL ((UART3_RATIO << 12) \
+ | (UART2_RATIO << 8) \
+ | (UART1_RATIO << 4) \
+ | (UART0_RATIO))
+/* CLK_DIV_PERIC1 */
+#define SPI1_RATIO 0x7
+#define SPI0_RATIO 0xf
+#define SPI1_SUB_RATIO 0x0
+#define SPI0_SUB_RATIO 0x0
+#define CLK_DIV_PERIC1_VAL ((SPI1_SUB_RATIO << 24) \
+ | ((SPI1_RATIO << 16) \
+ | (SPI0_SUB_RATIO << 8) \
+ | (SPI0_RATIO << 0)))
+
+/* CLK_DIV_PERIC2 */
+#define SPI2_RATIO 0xf
+#define SPI2_SUB_RATIO 0x0
+#define CLK_DIV_PERIC2_VAL ((SPI2_SUB_RATIO << 8) \
+ | (SPI2_RATIO << 0))
+
+/* CLK_DIV_PERIC3 */
+#define PWM_RATIO 8
+#define CLK_DIV_PERIC3_VAL (PWM_RATIO << 0)
+
+/* CLK_DIV_FSYS2 */
+#define MMC2_RATIO_MASK 0xf
+#define MMC2_RATIO_VAL 0x3
+#define MMC2_RATIO_OFFSET 0
+
+#define MMC2_PRE_RATIO_MASK 0xff
+#define MMC2_PRE_RATIO_VAL 0x9
+#define MMC2_PRE_RATIO_OFFSET 8
+
+#define MMC3_RATIO_MASK 0xf
+#define MMC3_RATIO_VAL 0x1
+#define MMC3_RATIO_OFFSET 16
+
+#define MMC3_PRE_RATIO_MASK 0xff
+#define MMC3_PRE_RATIO_VAL 0x0
+#define MMC3_PRE_RATIO_OFFSET 24
+
+/* CLK_SRC_LEX */
+#define CLK_SRC_LEX_VAL 0x0
+
+/* CLK_DIV_LEX */
+#define CLK_DIV_LEX_VAL 0x10
+
+/* CLK_DIV_R0X */
+#define CLK_DIV_R0X_VAL 0x10
+
+/* CLK_DIV_L0X */
+#define CLK_DIV_R1X_VAL 0x10
+
+/* CLK_DIV_ISP0 */
+#define CLK_DIV_ISP0_VAL 0x31
+
+/* CLK_DIV_ISP1 */
+#define CLK_DIV_ISP1_VAL 0x0
+
+/* CLK_DIV_ISP2 */
+#define CLK_DIV_ISP2_VAL 0x1
+
+/* CLK_SRC_DISP1_0 */
+#define CLK_SRC_DISP1_0_VAL 0x6
+
+/*
+ * DIV_DISP1_0
+ * For DP, divisor should be 2
+ */
+#define CLK_DIV_DISP1_0_FIMD1 (2 << 0)
+
+/* CLK_GATE_IP_DISP1 */
+#define CLK_GATE_DP1_ALLOW (1 << 4)
+
+#define DDR3PHY_CTRL_PHY_RESET (1 << 0)
+#define DDR3PHY_CTRL_PHY_RESET_OFF (0 << 0)
+
+#define PHY_CON0_RESET_VAL 0x17020a40
+#define P0_CMD_EN (1 << 14)
+#define BYTE_RDLVL_EN (1 << 13)
+#define CTRL_SHGATE (1 << 8)
+
+#define PHY_CON1_RESET_VAL 0x09210100
+#define CTRL_GATEDURADJ_MASK (0xf << 20)
+
+#define PHY_CON2_RESET_VAL 0x00010004
+#define INIT_DESKEW_EN (1 << 6)
+#define RDLVL_GATE_EN (1 << 24)
+
+/*ZQ Configurations */
+#define PHY_CON16_RESET_VAL 0x08000304
+
+#define ZQ_CLK_DIV_EN (1 << 18)
+#define ZQ_MANUAL_STR (1 << 1)
+#define ZQ_DONE (1 << 0)
+
+#define CTRL_RDLVL_GATE_ENABLE 1
+#define CTRL_RDLVL_GATE_DISABLE 1
+
+/* Direct Command */
+#define DIRECT_CMD_NOP 0x07000000
+#define DIRECT_CMD_PALL 0x01000000
+#define DIRECT_CMD_ZQINIT 0x0a000000
+#define DIRECT_CMD_CHANNEL_SHIFT 28
+#define DIRECT_CMD_CHIP_SHIFT 20
+
+/* DMC PHY Control0 register */
+#define PHY_CONTROL0_RESET_VAL 0x0
+#define MEM_TERM_EN (1 << 31) /* Termination enable for memory */
+#define PHY_TERM_EN (1 << 30) /* Termination enable for PHY */
+#define DMC_CTRL_SHGATE (1 << 29) /* Duration of DQS gating signal */
+#define FP_RSYNC (1 << 3) /* Force DLL resyncronization */
+
+/* Driver strength for CK, CKE, CS & CA */
+#define IMP_OUTPUT_DRV_40_OHM 0x5
+#define IMP_OUTPUT_DRV_30_OHM 0x7
+#define CA_CK_DRVR_DS_OFFSET 9
+#define CA_CKE_DRVR_DS_OFFSET 6
+#define CA_CS_DRVR_DS_OFFSET 3
+#define CA_ADR_DRVR_DS_OFFSET 0
+
+#define PHY_CON42_CTRL_BSTLEN_SHIFT 8
+#define PHY_CON42_CTRL_RDLAT_SHIFT 0
+
+struct mem_timings;
+
+/* Errors that we can encourter in low-level setup */
+enum {
+ SETUP_ERR_OK,
+ SETUP_ERR_RDLV_COMPLETE_TIMEOUT = -1,
+ SETUP_ERR_ZQ_CALIBRATION_FAILURE = -2,
+};
+
+/*
+ * Memory variant specific initialization code
+ *
+ * @param mem Memory timings for this memory type.
+ * @param mem_iv_size Memory interleaving size is a configurable parameter
+ * which the DMC uses to decide how to split a memory
+ * chunk into smaller chunks to support concurrent
+ * accesses; may vary across boards.
+ * @param reset Reset DDR PHY during initialization.
+ * @return 0 if ok, SETUP_ERR_... if there is a problem
+ */
+int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
+ int reset);
+
+/*
+ * Configure ZQ I/O interface
+ *
+ * @param mem Memory timings for this memory type.
+ * @param phy0_ctrl Pointer to struct containing PHY0 control reg
+ * @param phy1_ctrl Pointer to struct containing PHY1 control reg
+ * @return 0 if ok, -1 on error
+ */
+int dmc_config_zq(struct mem_timings *mem,
+ struct exynos5_phy_control *phy0_ctrl,
+ struct exynos5_phy_control *phy1_ctrl);
+
+/*
+ * Send NOP and MRS/EMRS Direct commands
+ *
+ * @param mem Memory timings for this memory type.
+ * @param dmc Pointer to struct of DMC registers
+ */
+void dmc_config_mrs(struct mem_timings *mem, struct exynos5_dmc *dmc);
+
+/*
+ * Send PALL Direct commands
+ *
+ * @param mem Memory timings for this memory type.
+ * @param dmc Pointer to struct of DMC registers
+ */
+void dmc_config_prech(struct mem_timings *mem, struct exynos5_dmc *dmc);
+
+/*
+ * Configure the memconfig and membaseconfig registers
+ *
+ * @param mem Memory timings for this memory type.
+ * @param exynos5_dmc Pointer to struct of DMC registers
+ */
+void dmc_config_memory(struct mem_timings *mem, struct exynos5_dmc *dmc);
+
+/*
+ * Reset the DLL. This function is common between DDR3 and LPDDR2.
+ * However, the reset value is different. So we are passing a flag
+ * ddr_mode to distinguish between LPDDR2 and DDR3.
+ *
+ * @param exynos5_dmc Pointer to struct of DMC registers
+ * @param ddr_mode Type of DDR memory
+ */
+void update_reset_dll(struct exynos5_dmc *, enum ddr_mode);
+#endif
diff --git a/arch/arm/cpu/armv7/exynos/lowlevel_init.c b/arch/arm/cpu/armv7/exynos/lowlevel_init.c
new file mode 100644
index 0000000..11fe5b8
--- /dev/null
+++ b/arch/arm/cpu/armv7/exynos/lowlevel_init.c
@@ -0,0 +1,73 @@
+/*
+ * Lowlevel setup for EXYNOS5 based board
+ *
+ * Copyright (C) 2013 Samsung Electronics
+ * Rajeshwari Shinde <rajeshwari.s@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <config.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/dmc.h>
+#include <asm/arch/power.h>
+#include <asm/arch/tzpc.h>
+#include <asm/arch/periph.h>
+#include <asm/arch/pinmux.h>
+#include "common_setup.h"
+
+/* These are the things we can do during low-level init */
+enum {
+ DO_WAKEUP = 1 << 0,
+ DO_CLOCKS = 1 << 1,
+ DO_MEM_RESET = 1 << 2,
+ DO_UART = 1 << 3,
+};
+
+int do_lowlevel_init(void)
+{
+ uint32_t reset_status;
+ int actions = 0;
+
+ arch_cpu_init();
+
+ reset_status = get_reset_status();
+
+ switch (reset_status) {
+ case S5P_CHECK_SLEEP:
+ actions = DO_CLOCKS | DO_WAKEUP;
+ break;
+ case S5P_CHECK_DIDLE:
+ case S5P_CHECK_LPA:
+ actions = DO_WAKEUP;
+ break;
+ default:
+ /* This is a normal boot (not a wake from sleep) */
+ actions = DO_CLOCKS | DO_MEM_RESET;
+ }
+
+ if (actions & DO_CLOCKS) {
+ system_clock_init();
+ mem_ctrl_init(actions & DO_MEM_RESET);
+ tzpc_init();
+ }
+
+ return actions & DO_WAKEUP;
+}
diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c
index bd499b4..2042062 100644
--- a/arch/arm/cpu/armv7/exynos/pinmux.c
+++ b/arch/arm/cpu/armv7/exynos/pinmux.c
@@ -408,9 +408,49 @@
return 0;
}
+static void exynos4_uart_config(int peripheral)
+{
+ struct exynos4_gpio_part1 *gpio1 =
+ (struct exynos4_gpio_part1 *)samsung_get_base_gpio_part1();
+ struct s5p_gpio_bank *bank;
+ int i, start, count;
+
+ switch (peripheral) {
+ case PERIPH_ID_UART0:
+ bank = &gpio1->a0;
+ start = 0;
+ count = 4;
+ break;
+ case PERIPH_ID_UART1:
+ bank = &gpio1->a0;
+ start = 4;
+ count = 4;
+ break;
+ case PERIPH_ID_UART2:
+ bank = &gpio1->a1;
+ start = 0;
+ count = 4;
+ break;
+ case PERIPH_ID_UART3:
+ bank = &gpio1->a1;
+ start = 4;
+ count = 2;
+ break;
+ }
+ for (i = start; i < start + count; i++) {
+ s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE);
+ s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
+ }
+}
static int exynos4_pinmux_config(int peripheral, int flags)
{
switch (peripheral) {
+ case PERIPH_ID_UART0:
+ case PERIPH_ID_UART1:
+ case PERIPH_ID_UART2:
+ case PERIPH_ID_UART3:
+ exynos4_uart_config(peripheral);
+ break;
case PERIPH_ID_I2C0:
case PERIPH_ID_I2C1:
case PERIPH_ID_I2C2:
diff --git a/arch/arm/cpu/armv7/exynos/power.c b/arch/arm/cpu/armv7/exynos/power.c
index 6375a81..5d3bda2 100644
--- a/arch/arm/cpu/armv7/exynos/power.c
+++ b/arch/arm/cpu/armv7/exynos/power.c
@@ -140,3 +140,53 @@
setbits_le32(&power->ps_hold_control, POWER_ENABLE_HW_TRIP);
}
}
+
+static uint32_t exynos5_get_reset_status(void)
+{
+ struct exynos5_power *power =
+ (struct exynos5_power *)samsung_get_base_power();
+
+ return power->inform1;
+}
+
+static uint32_t exynos4_get_reset_status(void)
+{
+ struct exynos4_power *power =
+ (struct exynos4_power *)samsung_get_base_power();
+
+ return power->inform1;
+}
+
+uint32_t get_reset_status(void)
+{
+ if (cpu_is_exynos5())
+ return exynos5_get_reset_status();
+ else
+ return exynos4_get_reset_status();
+}
+
+static void exynos5_power_exit_wakeup(void)
+{
+ struct exynos5_power *power =
+ (struct exynos5_power *)samsung_get_base_power();
+ typedef void (*resume_func)(void);
+
+ ((resume_func)power->inform0)();
+}
+
+static void exynos4_power_exit_wakeup(void)
+{
+ struct exynos4_power *power =
+ (struct exynos4_power *)samsung_get_base_power();
+ typedef void (*resume_func)(void);
+
+ ((resume_func)power->inform0)();
+}
+
+void power_exit_wakeup(void)
+{
+ if (cpu_is_exynos5())
+ exynos5_power_exit_wakeup();
+ else
+ exynos4_power_exit_wakeup();
+}
diff --git a/arch/arm/cpu/armv7/exynos/spl_boot.c b/arch/arm/cpu/armv7/exynos/spl_boot.c
new file mode 100644
index 0000000..6e8dd3b
--- /dev/null
+++ b/arch/arm/cpu/armv7/exynos/spl_boot.c
@@ -0,0 +1,203 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include<common.h>
+#include<config.h>
+
+#include <asm/arch/clock.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/dmc.h>
+#include <asm/arch/power.h>
+#include <asm/arch/spl.h>
+
+#include "common_setup.h"
+#include "clock_init.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+#define OM_STAT (0x1f << 1)
+
+/* Index into irom ptr table */
+enum index {
+ MMC_INDEX,
+ EMMC44_INDEX,
+ EMMC44_END_INDEX,
+ SPI_INDEX,
+ USB_INDEX,
+};
+
+/* IROM Function Pointers Table */
+u32 irom_ptr_table[] = {
+ [MMC_INDEX] = 0x02020030, /* iROM Function Pointer-SDMMC boot */
+ [EMMC44_INDEX] = 0x02020044, /* iROM Function Pointer-EMMC4.4 boot*/
+ [EMMC44_END_INDEX] = 0x02020048,/* iROM Function Pointer
+ -EMMC4.4 end boot operation */
+ [SPI_INDEX] = 0x02020058, /* iROM Function Pointer-SPI boot */
+ [USB_INDEX] = 0x02020070, /* iROM Function Pointer-USB boot*/
+ };
+
+void *get_irom_func(int index)
+{
+ return (void *)*(u32 *)irom_ptr_table[index];
+}
+
+#ifdef CONFIG_USB_BOOTING
+/*
+ * Set/clear program flow prediction and return the previous state.
+ */
+static int config_branch_prediction(int set_cr_z)
+{
+ unsigned int cr;
+
+ /* System Control Register: 11th bit Z Branch prediction enable */
+ cr = get_cr();
+ set_cr(set_cr_z ? cr | CR_Z : cr & ~CR_Z);
+
+ return cr & CR_Z;
+}
+#endif
+
+/*
+* Copy U-boot from mmc to RAM:
+* COPY_BL2_FNPTR_ADDR: Address in iRAM, which Contains
+* Pointer to API (Data transfer from mmc to ram)
+*/
+void copy_uboot_to_ram(void)
+{
+ enum boot_mode bootmode = BOOT_MODE_OM;
+
+ u32 (*copy_bl2)(u32 offset, u32 nblock, u32 dst) = NULL;
+ u32 offset = 0, size = 0;
+#ifdef CONFIG_SUPPORT_EMMC_BOOT
+ u32 (*copy_bl2_from_emmc)(u32 nblock, u32 dst);
+ void (*end_bootop_from_emmc)(void);
+#endif
+#ifdef CONFIG_USB_BOOTING
+ u32 (*usb_copy)(void);
+ int is_cr_z_set;
+ unsigned int sec_boot_check;
+
+ /* Read iRAM location to check for secondary USB boot mode */
+ sec_boot_check = readl(EXYNOS_IRAM_SECONDARY_BASE);
+ if (sec_boot_check == EXYNOS_USB_SECONDARY_BOOT)
+ bootmode = BOOT_MODE_USB;
+#endif
+
+ if (bootmode == BOOT_MODE_OM)
+ bootmode = readl(samsung_get_base_power()) & OM_STAT;
+
+ switch (bootmode) {
+#ifdef CONFIG_SPI_BOOTING
+ case BOOT_MODE_SERIAL:
+ offset = SPI_FLASH_UBOOT_POS;
+ size = CONFIG_BL2_SIZE;
+ copy_bl2 = get_irom_func(SPI_INDEX);
+ break;
+#endif
+ case BOOT_MODE_MMC:
+ offset = BL2_START_OFFSET;
+ size = BL2_SIZE_BLOC_COUNT;
+ copy_bl2 = get_irom_func(MMC_INDEX);
+ break;
+#ifdef CONFIG_SUPPORT_EMMC_BOOT
+ case BOOT_MODE_EMMC:
+ /* Set the FSYS1 clock divisor value for EMMC boot */
+ emmc_boot_clk_div_set();
+
+ copy_bl2_from_emmc = get_irom_func(EMMC44_INDEX);
+ end_bootop_from_emmc = get_irom_func(EMMC44_END_INDEX);
+
+ copy_bl2_from_emmc(BL2_SIZE_BLOC_COUNT, CONFIG_SYS_TEXT_BASE);
+ end_bootop_from_emmc();
+ break;
+#endif
+#ifdef CONFIG_USB_BOOTING
+ case BOOT_MODE_USB:
+ /*
+ * iROM needs program flow prediction to be disabled
+ * before copy from USB device to RAM
+ */
+ is_cr_z_set = config_branch_prediction(0);
+ usb_copy = get_irom_func(USB_INDEX);
+ usb_copy();
+ config_branch_prediction(is_cr_z_set);
+ break;
+#endif
+ default:
+ break;
+ }
+
+ if (copy_bl2)
+ copy_bl2(offset, size, CONFIG_SYS_TEXT_BASE);
+}
+
+void memzero(void *s, size_t n)
+{
+ char *ptr = s;
+ size_t i;
+
+ for (i = 0; i < n; i++)
+ *ptr++ = '\0';
+}
+
+/**
+ * Set up the U-Boot global_data pointer
+ *
+ * This sets the address of the global data, and sets up basic values.
+ *
+ * @param gdp Value to give to gd
+ */
+static void setup_global_data(gd_t *gdp)
+{
+ gd = gdp;
+ memzero((void *)gd, sizeof(gd_t));
+ gd->flags |= GD_FLG_RELOC;
+ gd->baudrate = CONFIG_BAUDRATE;
+ gd->have_console = 1;
+}
+
+void board_init_f(unsigned long bootflag)
+{
+ __aligned(8) gd_t local_gd;
+ __attribute__((noreturn)) void (*uboot)(void);
+
+ setup_global_data(&local_gd);
+
+ if (do_lowlevel_init())
+ power_exit_wakeup();
+
+ copy_uboot_to_ram();
+
+ /* Jump to U-Boot image */
+ uboot = (void *)CONFIG_SYS_TEXT_BASE;
+ (*uboot)();
+ /* Never returns Here */
+}
+
+/* Place Holders */
+void board_init_r(gd_t *id, ulong dest_addr)
+{
+ /* Function attribute is no-return */
+ /* This Function never executes */
+ while (1)
+ ;
+}
+void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3) {}
diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c
index 652e5a7..9ede3f5 100644
--- a/arch/arm/cpu/armv7/omap-common/emif-common.c
+++ b/arch/arm/cpu/armv7/omap-common/emif-common.c
@@ -1200,6 +1200,9 @@
/* TRAP for invalid TILER mappings in section 0 */
lis_map_regs_calculated.dmm_lisa_map_0 = DMM_LISA_MAP_0_INVAL_ADDR_TRAP;
+ if (omap_revision() >= OMAP4460_ES1_0)
+ lis_map_regs_calculated.is_ma_present = 1;
+
lisa_map_regs = &lis_map_regs_calculated;
#endif
struct dmm_lisa_map_regs *hw_lisa_map_regs =
diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c
index 56cf1f8..07b1108 100644
--- a/arch/arm/cpu/armv7/omap5/hw_data.c
+++ b/arch/arm/cpu/armv7/omap5/hw_data.c
@@ -412,6 +412,8 @@
(*prcm)->cm_l4per_gpio4_clkctrl,
(*prcm)->cm_l4per_gpio5_clkctrl,
(*prcm)->cm_l4per_gpio6_clkctrl,
+ (*prcm)->cm_l4per_gpio7_clkctrl,
+ (*prcm)->cm_l4per_gpio8_clkctrl,
0
};
diff --git a/arch/arm/cpu/armv7/omap5/hwinit.c b/arch/arm/cpu/armv7/omap5/hwinit.c
index daf124e..11ba36b 100644
--- a/arch/arm/cpu/armv7/omap5/hwinit.c
+++ b/arch/arm/cpu/armv7/omap5/hwinit.c
@@ -43,13 +43,15 @@
u32 *const omap_si_rev = (u32 *)OMAP_SRAM_SCRATCH_OMAP_REV;
-static struct gpio_bank gpio_bank_54xx[6] = {
+static struct gpio_bank gpio_bank_54xx[8] = {
{ (void *)OMAP54XX_GPIO1_BASE, METHOD_GPIO_24XX },
{ (void *)OMAP54XX_GPIO2_BASE, METHOD_GPIO_24XX },
{ (void *)OMAP54XX_GPIO3_BASE, METHOD_GPIO_24XX },
{ (void *)OMAP54XX_GPIO4_BASE, METHOD_GPIO_24XX },
{ (void *)OMAP54XX_GPIO5_BASE, METHOD_GPIO_24XX },
{ (void *)OMAP54XX_GPIO6_BASE, METHOD_GPIO_24XX },
+ { (void *)OMAP54XX_GPIO7_BASE, METHOD_GPIO_24XX },
+ { (void *)OMAP54XX_GPIO8_BASE, METHOD_GPIO_24XX },
};
const struct gpio_bank *const omap_gpio_bank = gpio_bank_54xx;
diff --git a/arch/arm/cpu/pxa/config.mk b/arch/arm/cpu/pxa/config.mk
index 0bbe295..ea55859 100644
--- a/arch/arm/cpu/pxa/config.mk
+++ b/arch/arm/cpu/pxa/config.mk
@@ -24,7 +24,7 @@
PLATFORM_RELFLAGS += -fno-common -ffixed-r8 -msoft-float
-PLATFORM_CPPFLAGS += -march=armv5te -mtune=xscale
+PLATFORM_CPPFLAGS += -mcpu=xscale
# =========================================================================
#
# Supply options according to compiler version
diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S
index 2e3f65e..2e623b1 100644
--- a/arch/arm/cpu/pxa/start.S
+++ b/arch/arm/cpu/pxa/start.S
@@ -208,10 +208,9 @@
* disable MMU stuff and caches
*/
mrc p15, 0, r0, c1, c0, 0
- bic r0, r0, #0x00002300 @ clear bits 13, 9:8 (--V- --RS)
+ bic r0, r0, #0x00003300 @ clear bits 13:12, 9:8 (--VI --RS)
bic r0, r0, #0x00000087 @ clear bits 7, 2:0 (B--- -CAM)
orr r0, r0, #0x00000002 @ set bit 2 (A) Align
- orr r0, r0, #0x00001000 @ set bit 12 (I) I-Cache
mcr p15, 0, r0, c1, c0, 0
mov pc, lr /* back to my caller */
diff --git a/arch/arm/dts/exynos5250.dtsi b/arch/arm/dts/exynos5250.dtsi
index 2d6dfff..4fff5e3 100644
--- a/arch/arm/dts/exynos5250.dtsi
+++ b/arch/arm/dts/exynos5250.dtsi
@@ -202,6 +202,34 @@
interrupts = <0 78 0>;
};
+ serial@12C00000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x12C00000 0x100>;
+ interrupts = <0 51 0>;
+ id = <0>;
+ };
+
+ serial@12C10000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x12C10000 0x100>;
+ interrupts = <0 52 0>;
+ id = <1>;
+ };
+
+ serial@12C20000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x12C20000 0x100>;
+ interrupts = <0 53 0>;
+ id = <2>;
+ };
+
+ serial@12C30000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x12C30000 0x100>;
+ interrupts = <0 54 0>;
+ id = <3>;
+ };
+
gpio: gpio {
};
};
diff --git a/arch/arm/dts/tegra114.dtsi b/arch/arm/dts/tegra114.dtsi
index f86d18d..626cc3c 100644
--- a/arch/arm/dts/tegra114.dtsi
+++ b/arch/arm/dts/tegra114.dtsi
@@ -216,4 +216,31 @@
clocks = <&tegra_car 15>;
status = "disable";
};
+
+ usb@7d000000 {
+ compatible = "nvidia,tegra114-ehci";
+ reg = <0x7d000000 0x4000>;
+ interrupts = <52>;
+ phy_type = "utmi";
+ clocks = <&tegra_car 22>; /* PERIPH_ID_USBD */
+ status = "disabled";
+ };
+
+ usb@7d004000 {
+ compatible = "nvidia,tegra114-ehci";
+ reg = <0x7d004000 0x4000>;
+ interrupts = <53>;
+ phy_type = "hsic";
+ clocks = <&tegra_car 58>; /* PERIPH_ID_USB2 */
+ status = "disabled";
+ };
+
+ usb@7d008000 {
+ compatible = "nvidia,tegra114-ehci";
+ reg = <0x7d008000 0x4000>;
+ interrupts = <129>;
+ phy_type = "utmi";
+ clocks = <&tegra_car 59>; /* PERIPH_ID_USB3 */
+ status = "disabled";
+ };
};
diff --git a/arch/arm/dts/tegra30.dtsi b/arch/arm/dts/tegra30.dtsi
index ccf154f..fee1c36 100644
--- a/arch/arm/dts/tegra30.dtsi
+++ b/arch/arm/dts/tegra30.dtsi
@@ -216,4 +216,31 @@
clocks = <&tegra_car 15>;
status = "disabled";
};
+
+ usb@7d000000 {
+ compatible = "nvidia,tegra30-ehci";
+ reg = <0x7d000000 0x4000>;
+ interrupts = <52>;
+ phy_type = "utmi";
+ clocks = <&tegra_car 22>; /* PERIPH_ID_USBD */
+ status = "disabled";
+ };
+
+ usb@7d004000 {
+ compatible = "nvidia,tegra30-ehci";
+ reg = <0x7d004000 0x4000>;
+ interrupts = <53>;
+ phy_type = "hsic";
+ clocks = <&tegra_car 58>; /* PERIPH_ID_USB2 */
+ status = "disabled";
+ };
+
+ usb@7d008000 {
+ compatible = "nvidia,tegra30-ehci";
+ reg = <0x7d008000 0x4000>;
+ interrupts = <129>;
+ phy_type = "utmi";
+ clocks = <&tegra_car 59>; /* PERIPH_ID_USB3 */
+ status = "disabled";
+ };
};
diff --git a/arch/arm/include/asm/arch-am33xx/ddr_defs.h b/arch/arm/include/asm/arch-am33xx/ddr_defs.h
index bb53a6a..d2f3a78 100644
--- a/arch/arm/include/asm/arch-am33xx/ddr_defs.h
+++ b/arch/arm/include/asm/arch-am33xx/ddr_defs.h
@@ -284,7 +284,6 @@
* This structure represents the DDR io control on AM33XX devices.
*/
struct ddr_cmdtctrl {
- unsigned int resv1[1];
unsigned int cm0ioctl;
unsigned int cm1ioctl;
unsigned int cm2ioctl;
diff --git a/arch/arm/include/asm/arch-am33xx/gpio.h b/arch/arm/include/asm/arch-am33xx/gpio.h
index 1a211e9..8346979 100644
--- a/arch/arm/include/asm/arch-am33xx/gpio.h
+++ b/arch/arm/include/asm/arch-am33xx/gpio.h
@@ -21,6 +21,8 @@
#include <asm/omap_gpio.h>
+#define OMAP_MAX_GPIO 128
+
#define AM33XX_GPIO0_BASE 0x44E07000
#define AM33XX_GPIO1_BASE 0x4804C000
#define AM33XX_GPIO2_BASE 0x481AC000
diff --git a/arch/arm/include/asm/arch-exynos/cpu.h b/arch/arm/include/asm/arch-exynos/cpu.h
index 1ff7642..1ff231b 100644
--- a/arch/arm/include/asm/arch-exynos/cpu.h
+++ b/arch/arm/include/asm/arch-exynos/cpu.h
@@ -40,8 +40,7 @@
#define EXYNOS4_WATCHDOG_BASE 0x10060000
#define EXYNOS4_TZPC_BASE 0x10110000
#define EXYNOS4_MIU_BASE 0x10600000
-#define EXYNOS4_DMC0_BASE 0x10400000
-#define EXYNOS4_DMC1_BASE 0x10410000
+#define EXYNOS4_DMC_CTRL_BASE 0x10400000
#define EXYNOS4_GPIO_PART2_BASE 0x11000000
#define EXYNOS4_GPIO_PART1_BASE 0x11400000
#define EXYNOS4_FIMD_BASE 0x11C00000
@@ -64,6 +63,7 @@
#define EXYNOS4_DP_BASE DEVICE_NOT_AVAILABLE
#define EXYNOS4_SPI_ISP_BASE DEVICE_NOT_AVAILABLE
#define EXYNOS4_ACE_SFR_BASE DEVICE_NOT_AVAILABLE
+#define EXYNOS4_DMC_PHY_BASE DEVICE_NOT_AVAILABLE
/* EXYNOS4X12 */
#define EXYNOS4X12_GPIO_PART3_BASE 0x03860000
@@ -76,8 +76,7 @@
#define EXYNOS4X12_SYSTIMER_BASE 0x10050000
#define EXYNOS4X12_WATCHDOG_BASE 0x10060000
#define EXYNOS4X12_TZPC_BASE 0x10110000
-#define EXYNOS4X12_DMC0_BASE 0x10600000
-#define EXYNOS4X12_DMC1_BASE 0x10610000
+#define EXYNOS4X12_DMC_CTRL_BASE 0x10600000
#define EXYNOS4X12_GPIO_PART4_BASE 0x106E0000
#define EXYNOS4X12_GPIO_PART2_BASE 0x11000000
#define EXYNOS4X12_GPIO_PART1_BASE 0x11400000
@@ -99,6 +98,7 @@
#define EXYNOS4X12_SPI_BASE DEVICE_NOT_AVAILABLE
#define EXYNOS4X12_SPI_ISP_BASE DEVICE_NOT_AVAILABLE
#define EXYNOS4X12_ACE_SFR_BASE DEVICE_NOT_AVAILABLE
+#define EXYNOS4X12_DMC_PHY_BASE DEVICE_NOT_AVAILABLE
/* EXYNOS5 Common*/
#define EXYNOS5_I2C_SPACING 0x10000
@@ -112,8 +112,7 @@
#define EXYNOS5_TZPC_BASE 0x10100000
#define EXYNOS5_WATCHDOG_BASE 0x101D0000
#define EXYNOS5_ACE_SFR_BASE 0x10830000
-#define EXYNOS5_DMC_PHY0_BASE 0x10C00000
-#define EXYNOS5_DMC_PHY1_BASE 0x10C10000
+#define EXYNOS5_DMC_PHY_BASE 0x10C00000
#define EXYNOS5_GPIO_PART3_BASE 0x10D10000
#define EXYNOS5_DMC_CTRL_BASE 0x10DD0000
#define EXYNOS5_GPIO_PART1_BASE 0x11400000
@@ -239,6 +238,8 @@
SAMSUNG_BASE(spi, SPI_BASE)
SAMSUNG_BASE(spi_isp, SPI_ISP_BASE)
SAMSUNG_BASE(tzpc, TZPC_BASE)
+SAMSUNG_BASE(dmc_ctrl, DMC_CTRL_BASE)
+SAMSUNG_BASE(dmc_phy, DMC_PHY_BASE)
#endif
#endif /* _EXYNOS4_CPU_H */
diff --git a/arch/arm/include/asm/arch-exynos/power.h b/arch/arm/include/asm/arch-exynos/power.h
index 3549667..44ad8d3 100644
--- a/arch/arm/include/asm/arch-exynos/power.h
+++ b/arch/arm/include/asm/arch-exynos/power.h
@@ -888,4 +888,16 @@
* source as XXTI
*/
void set_xclkout(void);
+
+/*
+ * Read inform1 to get the reset status.
+ * @return: the value can be either S5P_CHECK_SLEEP or
+ * S5P_CHECK_DIDLE or S5P_CHECK_LPA as stored in inform1
+ * if none of these then its normal booting.
+ */
+uint32_t get_reset_status(void);
+
+
+/* Read the resume function and call it */
+void power_exit_wakeup(void);
#endif
diff --git a/arch/arm/include/asm/arch-exynos/spl.h b/arch/arm/include/asm/arch-exynos/spl.h
index 46b25a6..59bb7e0 100644
--- a/arch/arm/include/asm/arch-exynos/spl.h
+++ b/arch/arm/include/asm/arch-exynos/spl.h
@@ -32,6 +32,7 @@
* pin values are the same across Exynos4 and Exynos5.
*/
BOOT_MODE_MMC = 4,
+ BOOT_MODE_EMMC = 8, /* EMMC4.4 */
BOOT_MODE_SERIAL = 20,
/* Boot based on Operating Mode pin settings */
BOOT_MODE_OM = 32,
diff --git a/arch/arm/include/asm/arch-mx27/clock.h b/arch/arm/include/asm/arch-mx27/clock.h
index fd062d3..2b03a41 100644
--- a/arch/arm/include/asm/arch-mx27/clock.h
+++ b/arch/arm/include/asm/arch-mx27/clock.h
@@ -26,6 +26,7 @@
enum mxc_clock {
MXC_ARM_CLK,
+ MXC_I2C_CLK,
MXC_UART_CLK,
MXC_ESDHC_CLK,
MXC_FEC_CLK,
diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h
index 03abb2a..45824f9 100644
--- a/arch/arm/include/asm/arch-mx6/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx6/imx-regs.h
@@ -364,7 +364,7 @@
#define IOMUXC_GPR2_MODE_DISABLED 0
#define IOMUXC_GPR2_MODE_ENABLED_DI0 1
-#define IOMUXC_GPR2_MODE_ENABLED_DI1 2
+#define IOMUXC_GPR2_MODE_ENABLED_DI1 3
#define IOMUXC_GPR2_LVDS_CH1_MODE_OFFSET 2
#define IOMUXC_GPR2_LVDS_CH1_MODE_MASK (3<<IOMUXC_GPR2_LVDS_CH1_MODE_OFFSET)
diff --git a/arch/arm/include/asm/arch-mx6/mx6dl_pins.h b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h
index a4134a0..dbb7856 100644
--- a/arch/arm/include/asm/arch-mx6/mx6dl_pins.h
+++ b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h
@@ -23,114 +23,1661 @@
#include <asm/imx-common/iomux-v3.h>
enum {
+ MX6_PAD_CSI0_DAT10__IPU1_CSI0_D_10 = IOMUX_PAD(0x0360, 0x004C, 0, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC = IOMUX_PAD(0x0360, 0x004C, 1, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT10__ECSPI2_MISO = IOMUX_PAD(0x0360, 0x004C, 2, 0x07F8, 0, 0),
MX6_PAD_CSI0_DAT10__UART1_TXD = IOMUX_PAD(0x0360, 0x004C, 3, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT10__UART1_RXD = IOMUX_PAD(0x0360, 0x004C, 3, 0x08FC, 0, 0),
+ MX6_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4 = IOMUX_PAD(0x0360, 0x004C, 4, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT10__GPIO_5_28 = IOMUX_PAD(0x0360, 0x004C, 5, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT10__MMDC_MMDC_DEBUG_33 = IOMUX_PAD(0x0360, 0x004C, 6, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT10__SIMBA_TRACE_7 = IOMUX_PAD(0x0360, 0x004C, 7, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT11__IPU1_CSI0_D_11 = IOMUX_PAD(0x0364, 0x0050, 0, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS = IOMUX_PAD(0x0364, 0x0050, 1, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT11__ECSPI2_SS0 = IOMUX_PAD(0x0364, 0x0050, 2, 0x0800, 0, 0),
+ MX6_PAD_CSI0_DAT11__UART1_TXD = IOMUX_PAD(0x0364, 0x0050, 3, 0x0000, 0, 0),
MX6_PAD_CSI0_DAT11__UART1_RXD = IOMUX_PAD(0x0364, 0x0050, 3, 0x08FC, 1, 0),
- MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK = IOMUX_PAD(0x03B0, 0x009C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5 = IOMUX_PAD(0x0364, 0x0050, 4, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT11__GPIO_5_29 = IOMUX_PAD(0x0364, 0x0050, 5, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT11__MMDC_MMDC_DEBUG_34 = IOMUX_PAD(0x0364, 0x0050, 6, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT11__SIMBA_TRACE_8 = IOMUX_PAD(0x0364, 0x0050, 7, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT12__IPU1_CSI0_D_12 = IOMUX_PAD(0x0368, 0x0054, 0, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT12__WEIM_WEIM_D_8 = IOMUX_PAD(0x0368, 0x0054, 1, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT12__PCIE_CTRL_DIAG_STATUS_BUS_MUX_16 = IOMUX_PAD(0x0368, 0x0054, 2, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT12__UART4_TXD = IOMUX_PAD(0x0368, 0x0054, 3, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT12__UART4_RXD = IOMUX_PAD(0x0368, 0x0054, 3, 0x0914, 0, 0),
+ MX6_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6 = IOMUX_PAD(0x0368, 0x0054, 4, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT12__GPIO_5_30 = IOMUX_PAD(0x0368, 0x0054, 5, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT12__MMDC_MMDC_DEBUG_35 = IOMUX_PAD(0x0368, 0x0054, 6, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT12__SIMBA_TRACE_9 = IOMUX_PAD(0x0368, 0x0054, 7, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT13__IPU1_CSI0_D_13 = IOMUX_PAD(0x036C, 0x0058, 0, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT13__WEIM_WEIM_D_9 = IOMUX_PAD(0x036C, 0x0058, 1, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT13__PCIE_CTRL_DIAG_STATUS_BUS_MUX_17 = IOMUX_PAD(0x036C, 0x0058, 2, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT13__UART4_TXD = IOMUX_PAD(0x036C, 0x0058, 3, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT13__UART4_RXD = IOMUX_PAD(0x036C, 0x0058, 3, 0x0914, 1, 0),
+ MX6_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7 = IOMUX_PAD(0x036C, 0x0058, 4, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT13__GPIO_5_31 = IOMUX_PAD(0x036C, 0x0058, 5, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT13__MMDC_MMDC_DEBUG_36 = IOMUX_PAD(0x036C, 0x0058, 6, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT13__SIMBA_TRACE_10 = IOMUX_PAD(0x036C, 0x0058, 7, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT14__IPU1_CSI0_D_14 = IOMUX_PAD(0x0370, 0x005C, 0, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT14__WEIM_WEIM_D_10 = IOMUX_PAD(0x0370, 0x005C, 1, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT14__PCIE_CTRL_DIAG_STATUS_BUS_MUX_18 = IOMUX_PAD(0x0370, 0x005C, 2, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT14__UART5_TXD = IOMUX_PAD(0x0370, 0x005C, 3, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT14__UART5_RXD = IOMUX_PAD(0x0370, 0x005C, 3, 0x091C, 0, 0),
+ MX6_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8 = IOMUX_PAD(0x0370, 0x005C, 4, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT14__GPIO_6_0 = IOMUX_PAD(0x0370, 0x005C, 5, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT14__MMDC_MMDC_DEBUG_37 = IOMUX_PAD(0x0370, 0x005C, 6, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT14__SIMBA_TRACE_11 = IOMUX_PAD(0x0370, 0x005C, 7, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT15__IPU1_CSI0_D_15 = IOMUX_PAD(0x0374, 0x0060, 0, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT15__WEIM_WEIM_D_11 = IOMUX_PAD(0x0374, 0x0060, 1, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT15__PCIE_CTRL_DIAG_STATUS_BUS_MUX_19 = IOMUX_PAD(0x0374, 0x0060, 2, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT15__UART5_TXD = IOMUX_PAD(0x0374, 0x0060, 3, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT15__UART5_RXD = IOMUX_PAD(0x0374, 0x0060, 3, 0x091C, 1, 0),
+ MX6_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9 = IOMUX_PAD(0x0374, 0x0060, 4, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT15__GPIO_6_1 = IOMUX_PAD(0x0374, 0x0060, 5, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT15__MMDC_MMDC_DEBUG_38 = IOMUX_PAD(0x0374, 0x0060, 6, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT15__SIMBA_TRACE_12 = IOMUX_PAD(0x0374, 0x0060, 7, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT16__IPU1_CSI0_D_16 = IOMUX_PAD(0x0378, 0x0064, 0, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT16__WEIM_WEIM_D_12 = IOMUX_PAD(0x0378, 0x0064, 1, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT16__PCIE_CTRL_DIAG_STATUS_BUS_MUX_20 = IOMUX_PAD(0x0378, 0x0064, 2, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT16__UART4_CTS = IOMUX_PAD(0x0378, 0x0064, 3, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT16__UART4_RTS = IOMUX_PAD(0x0378, 0x0064, 3, 0x0910, 0, 0),
+ MX6_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10 = IOMUX_PAD(0x0378, 0x0064, 4, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT16__GPIO_6_2 = IOMUX_PAD(0x0378, 0x0064, 5, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT16__MMDC_MMDC_DEBUG_39 = IOMUX_PAD(0x0378, 0x0064, 6, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT16__SIMBA_TRACE_13 = IOMUX_PAD(0x0378, 0x0064, 7, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT17__IPU1_CSI0_D_17 = IOMUX_PAD(0x037C, 0x0068, 0, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT17__WEIM_WEIM_D_13 = IOMUX_PAD(0x037C, 0x0068, 1, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT17__PCIE_CTRL_DIAG_STATUS_BUS_MUX_21 = IOMUX_PAD(0x037C, 0x0068, 2, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT17__UART4_CTS = IOMUX_PAD(0x037C, 0x0068, 3, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT17__UART4_RTS = IOMUX_PAD(0x037C, 0x0068, 3, 0x0910, 1, 0),
+ MX6_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11 = IOMUX_PAD(0x037C, 0x0068, 4, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT17__GPIO_6_3 = IOMUX_PAD(0x037C, 0x0068, 5, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT17__MMDC_MMDC_DEBUG_40 = IOMUX_PAD(0x037C, 0x0068, 6, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT17__SIMBA_TRACE_14 = IOMUX_PAD(0x037C, 0x0068, 7, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT18__IPU1_CSI0_D_18 = IOMUX_PAD(0x0380, 0x006C, 0, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT18__WEIM_WEIM_D_14 = IOMUX_PAD(0x0380, 0x006C, 1, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT18__PCIE_CTRL_DIAG_STATUS_BUS_MUX_22 = IOMUX_PAD(0x0380, 0x006C, 2, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT18__UART5_CTS = IOMUX_PAD(0x0380, 0x006C, 3, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT18__UART5_RTS = IOMUX_PAD(0x0380, 0x006C, 3, 0x0918, 0, 0),
+ MX6_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12 = IOMUX_PAD(0x0380, 0x006C, 4, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT18__GPIO_6_4 = IOMUX_PAD(0x0380, 0x006C, 5, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT18__MMDC_MMDC_DEBUG_41 = IOMUX_PAD(0x0380, 0x006C, 6, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT18__SIMBA_TRACE_15 = IOMUX_PAD(0x0380, 0x006C, 7, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT19__IPU1_CSI0_D_19 = IOMUX_PAD(0x0384, 0x0070, 0, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT19__WEIM_WEIM_D_15 = IOMUX_PAD(0x0384, 0x0070, 1, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT19__PCIE_CTRL_DIAG_STATUS_BUS_MUX_23 = IOMUX_PAD(0x0384, 0x0070, 2, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT19__UART5_CTS = IOMUX_PAD(0x0384, 0x0070, 3, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT19__UART5_RTS = IOMUX_PAD(0x0384, 0x0070, 3, 0x0918, 1, 0),
+ MX6_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13 = IOMUX_PAD(0x0384, 0x0070, 4, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT19__GPIO_6_5 = IOMUX_PAD(0x0384, 0x0070, 5, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT19__MMDC_MMDC_DEBUG_42 = IOMUX_PAD(0x0384, 0x0070, 6, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT19__ANATOP_ANATOP_TESTO_9 = IOMUX_PAD(0x0384, 0x0070, 7, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT4__IPU1_CSI0_D_4 = IOMUX_PAD(0x0388, 0x0074, 0, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT4__WEIM_WEIM_D_2 = IOMUX_PAD(0x0388, 0x0074, 1, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT4__ECSPI1_SCLK = IOMUX_PAD(0x0388, 0x0074, 2, 0x07D8, 0, 0),
+ MX6_PAD_CSI0_DAT4__KPP_COL_5 = IOMUX_PAD(0x0388, 0x0074, 3, 0x08C0, 0, 0),
+ MX6_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC = IOMUX_PAD(0x0388, 0x0074, 4, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT4__GPIO_5_22 = IOMUX_PAD(0x0388, 0x0074, 5, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT4__MMDC_MMDC_DEBUG_43 = IOMUX_PAD(0x0388, 0x0074, 6, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT4__SIMBA_TRACE_1 = IOMUX_PAD(0x0388, 0x0074, 7, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT5__IPU1_CSI0_D_5 = IOMUX_PAD(0x038C, 0x0078, 0, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT5__WEIM_WEIM_D_3 = IOMUX_PAD(0x038C, 0x0078, 1, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT5__ECSPI1_MOSI = IOMUX_PAD(0x038C, 0x0078, 2, 0x07E0, 0, 0),
+ MX6_PAD_CSI0_DAT5__KPP_ROW_5 = IOMUX_PAD(0x038C, 0x0078, 3, 0x08CC, 0, 0),
+ MX6_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD = IOMUX_PAD(0x038C, 0x0078, 4, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT5__GPIO_5_23 = IOMUX_PAD(0x038C, 0x0078, 5, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT5__MMDC_MMDC_DEBUG_44 = IOMUX_PAD(0x038C, 0x0078, 6, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT5__SIMBA_TRACE_2 = IOMUX_PAD(0x038C, 0x0078, 7, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT6__IPU1_CSI0_D_6 = IOMUX_PAD(0x0390, 0x007C, 0, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT6__WEIM_WEIM_D_4 = IOMUX_PAD(0x0390, 0x007C, 1, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT6__ECSPI1_MISO = IOMUX_PAD(0x0390, 0x007C, 2, 0x07DC, 0, 0),
+ MX6_PAD_CSI0_DAT6__KPP_COL_6 = IOMUX_PAD(0x0390, 0x007C, 3, 0x08C4, 0, 0),
+ MX6_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS = IOMUX_PAD(0x0390, 0x007C, 4, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT6__GPIO_5_24 = IOMUX_PAD(0x0390, 0x007C, 5, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT6__MMDC_MMDC_DEBUG_45 = IOMUX_PAD(0x0390, 0x007C, 6, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT6__SIMBA_TRACE_3 = IOMUX_PAD(0x0390, 0x007C, 7, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT7__IPU1_CSI0_D_7 = IOMUX_PAD(0x0394, 0x0080, 0, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT7__WEIM_WEIM_D_5 = IOMUX_PAD(0x0394, 0x0080, 1, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT7__ECSPI1_SS0 = IOMUX_PAD(0x0394, 0x0080, 2, 0x07E4, 0, 0),
+ MX6_PAD_CSI0_DAT7__KPP_ROW_6 = IOMUX_PAD(0x0394, 0x0080, 3, 0x08D0, 0, 0),
+ MX6_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD = IOMUX_PAD(0x0394, 0x0080, 4, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT7__GPIO_5_25 = IOMUX_PAD(0x0394, 0x0080, 5, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT7__MMDC_MMDC_DEBUG_46 = IOMUX_PAD(0x0394, 0x0080, 6, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT7__SIMBA_TRACE_4 = IOMUX_PAD(0x0394, 0x0080, 7, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT8__IPU1_CSI0_D_8 = IOMUX_PAD(0x0398, 0x0084, 0, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT8__WEIM_WEIM_D_6 = IOMUX_PAD(0x0398, 0x0084, 1, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT8__ECSPI2_SCLK = IOMUX_PAD(0x0398, 0x0084, 2, 0x07F4, 0, 0),
+ MX6_PAD_CSI0_DAT8__KPP_COL_7 = IOMUX_PAD(0x0398, 0x0084, 3, 0x08C8, 0, 0),
+ MX6_PAD_CSI0_DAT8__I2C1_SDA = IOMUX_PAD(0x0398, 0x0084, 4 | IOMUX_CONFIG_SION, 0x086C, 0, 0),
+ MX6_PAD_CSI0_DAT8__GPIO_5_26 = IOMUX_PAD(0x0398, 0x0084, 5, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT8__MMDC_MMDC_DEBUG_47 = IOMUX_PAD(0x0398, 0x0084, 6, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT8__SIMBA_TRACE_5 = IOMUX_PAD(0x0398, 0x0084, 7, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT9__IPU1_CSI0_D_9 = IOMUX_PAD(0x039C, 0x0088, 0, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT9__WEIM_WEIM_D_7 = IOMUX_PAD(0x039C, 0x0088, 1, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT9__ECSPI2_MOSI = IOMUX_PAD(0x039C, 0x0088, 2, 0x07FC, 0, 0),
+ MX6_PAD_CSI0_DAT9__KPP_ROW_7 = IOMUX_PAD(0x039C, 0x0088, 3, 0x08D4, 0, 0),
+ MX6_PAD_CSI0_DAT9__I2C1_SCL = IOMUX_PAD(0x039C, 0x0088, 4 | IOMUX_CONFIG_SION, 0x0868, 0, 0),
+ MX6_PAD_CSI0_DAT9__GPIO_5_27 = IOMUX_PAD(0x039C, 0x0088, 5, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT9__MMDC_MMDC_DEBUG_48 = IOMUX_PAD(0x039C, 0x0088, 6, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DAT9__SIMBA_TRACE_6 = IOMUX_PAD(0x039C, 0x0088, 7, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN = IOMUX_PAD(0x03A0, 0x008C, 0, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DATA_EN__WEIM_WEIM_D_0 = IOMUX_PAD(0x03A0, 0x008C, 1, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DATA_EN__PCIE_CTRL_DIAG_STATUS_BUS_MUX_14 = IOMUX_PAD(0x03A0, 0x008C, 2, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2 = IOMUX_PAD(0x03A0, 0x008C, 4, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DATA_EN__GPIO_5_20 = IOMUX_PAD(0x03A0, 0x008C, 5, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DATA_EN__MMDC_MMDC_DEBUG_31 = IOMUX_PAD(0x03A0, 0x008C, 6, 0x0000, 0, 0),
+ MX6_PAD_CSI0_DATA_EN__SIMBA_TRCLK = IOMUX_PAD(0x03A0, 0x008C, 7, 0x0000, 0, 0),
+ MX6_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC = IOMUX_PAD(0x03A4, 0x0090, 0, 0x0000, 0, 0),
+ MX6_PAD_CSI0_MCLK__PCIE_CTRL_DIAG_STATUS_BUS_MUX_13 = IOMUX_PAD(0x03A4, 0x0090, 2, 0x0000, 0, 0),
+ MX6_PAD_CSI0_MCLK__CCM_CLKO = IOMUX_PAD(0x03A4, 0x0090, 3, 0x0000, 0, 0),
+ MX6_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1 = IOMUX_PAD(0x03A4, 0x0090, 4, 0x0000, 0, 0),
+ MX6_PAD_CSI0_MCLK__GPIO_5_19 = IOMUX_PAD(0x03A4, 0x0090, 5, 0x0000, 0, 0),
+ MX6_PAD_CSI0_MCLK__MMDC_MMDC_DEBUG_30 = IOMUX_PAD(0x03A4, 0x0090, 6, 0x0000, 0, 0),
+ MX6_PAD_CSI0_MCLK__SIMBA_TRCTL = IOMUX_PAD(0x03A4, 0x0090, 7, 0x0000, 0, 0),
+ MX6_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK = IOMUX_PAD(0x03A8, 0x0094, 0, 0x0000, 0, 0),
+ MX6_PAD_CSI0_PIXCLK__PCIE_CTRL_DIAG_STATUS_BUS_MUX_12 = IOMUX_PAD(0x03A8, 0x0094, 2, 0x0000, 0, 0),
+ MX6_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0 = IOMUX_PAD(0x03A8, 0x0094, 4, 0x0000, 0, 0),
+ MX6_PAD_CSI0_PIXCLK__GPIO_5_18 = IOMUX_PAD(0x03A8, 0x0094, 5, 0x0000, 0, 0),
+ MX6_PAD_CSI0_PIXCLK__MMDC_MMDC_DEBUG_29 = IOMUX_PAD(0x03A8, 0x0094, 6, 0x0000, 0, 0),
+ MX6_PAD_CSI0_PIXCLK__SIMBA_EVENTO = IOMUX_PAD(0x03A8, 0x0094, 7, 0x0000, 0, 0),
+ MX6_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC = IOMUX_PAD(0x03AC, 0x0098, 0, 0x0000, 0, 0),
+ MX6_PAD_CSI0_VSYNC__WEIM_WEIM_D_1 = IOMUX_PAD(0x03AC, 0x0098, 1, 0x0000, 0, 0),
+ MX6_PAD_CSI0_VSYNC__PCIE_CTRL_DIAG_STATUS_BUS_MUX_15 = IOMUX_PAD(0x03AC, 0x0098, 2, 0x0000, 0, 0),
+ MX6_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3 = IOMUX_PAD(0x03AC, 0x0098, 4, 0x0000, 0, 0),
+ MX6_PAD_CSI0_VSYNC__GPIO_5_21 = IOMUX_PAD(0x03AC, 0x0098, 5, 0x0000, 0, 0),
+ MX6_PAD_CSI0_VSYNC__MMDC_MMDC_DEBUG_32 = IOMUX_PAD(0x03AC, 0x0098, 6, 0x0000, 0, 0),
+ MX6_PAD_CSI0_VSYNC__SIMBA_TRACE_0 = IOMUX_PAD(0x03AC, 0x0098, 7, 0x0000, 0, 0),
+ MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK = IOMUX_PAD(0x03B0, 0x009C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DI0_DISP_CLK__LCDIF_CLK = IOMUX_PAD(0x03B0, 0x009C, 1, 0x0000, 0, 0),
+ MX6_PAD_DI0_DISP_CLK__MIPI_CORE_DPHY_TEST_OUT_28 = IOMUX_PAD(0x03B0, 0x009C, 3, 0x0000, 0, 0),
+ MX6_PAD_DI0_DISP_CLK__SDMA_DEBUG_CORE_STATE_0 = IOMUX_PAD(0x03B0, 0x009C, 4, 0x0000, 0, 0),
+ MX6_PAD_DI0_DISP_CLK__GPIO_4_16 = IOMUX_PAD(0x03B0, 0x009C, 5, 0x0000, 0, 0),
+ MX6_PAD_DI0_DISP_CLK__MMDC_MMDC_DEBUG_0 = IOMUX_PAD(0x03B0, 0x009C, 6, 0x0000, 0, 0),
+ MX6_PAD_DI0_DISP_CLK__TPSMP_HDATA_DIR = IOMUX_PAD(0x03B0, 0x009C, 7, 0x0000, 0, 0),
+ MX6_PAD_DI0_DISP_CLK__LCDIF_WR_RWN = IOMUX_PAD(0x03B0, 0x009C, 8, 0x0000, 0, 0),
MX6_PAD_DI0_PIN15__IPU1_DI0_PIN15 = IOMUX_PAD(0x03B4, 0x00A0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6_PAD_DI0_PIN2__IPU1_DI0_PIN2 = IOMUX_PAD(0x03B8, 0x00A4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6_PAD_DI0_PIN3__IPU1_DI0_PIN3 = IOMUX_PAD(0x03BC, 0x00A8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6_PAD_DI0_PIN4__GPIO_4_20 = IOMUX_PAD(0x03C0, 0x00AC, 5, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DI0_PIN15__LCDIF_ENABLE = IOMUX_PAD(0x03B4, 0x00A0, 1, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN15__AUDMUX_AUD6_TXC = IOMUX_PAD(0x03B4, 0x00A0, 2, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN15__MIPI_CORE_DPHY_TEST_OUT_29 = IOMUX_PAD(0x03B4, 0x00A0, 3, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN15__SDMA_DEBUG_CORE_STATE_1 = IOMUX_PAD(0x03B4, 0x00A0, 4, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN15__GPIO_4_17 = IOMUX_PAD(0x03B4, 0x00A0, 5, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN15__MMDC_MMDC_DEBUG_1 = IOMUX_PAD(0x03B4, 0x00A0, 6, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN15__PL301_SIM_MX6DL_PER1_HSIZE_0 = IOMUX_PAD(0x03B4, 0x00A0, 7, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN15__LCDIF_RD_E = IOMUX_PAD(0x03B4, 0x00A0, 8, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN2__IPU1_DI0_PIN2 = IOMUX_PAD(0x03B8, 0x00A4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DI0_PIN2__LCDIF_HSYNC = IOMUX_PAD(0x03B8, 0x00A4, 1, 0x08D8, 0, 0),
+ MX6_PAD_DI0_PIN2__AUDMUX_AUD6_TXD = IOMUX_PAD(0x03B8, 0x00A4, 2, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN2__MIPI_CORE_DPHY_TEST_OUT_30 = IOMUX_PAD(0x03B8, 0x00A4, 3, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN2__SDMA_DEBUG_CORE_STATE_2 = IOMUX_PAD(0x03B8, 0x00A4, 4, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN2__GPIO_4_18 = IOMUX_PAD(0x03B8, 0x00A4, 5, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN2__MMDC_MMDC_DEBUG_2 = IOMUX_PAD(0x03B8, 0x00A4, 6, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN2__PL301_SIM_MX6DL_PER1_HADDR_9 = IOMUX_PAD(0x03B8, 0x00A4, 7, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN2__LCDIF_RS = IOMUX_PAD(0x03B8, 0x00A4, 8, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN3__IPU1_DI0_PIN3 = IOMUX_PAD(0x03BC, 0x00A8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DI0_PIN3__LCDIF_VSYNC = IOMUX_PAD(0x03BC, 0x00A8, 1, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS = IOMUX_PAD(0x03BC, 0x00A8, 2, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN3__MIPI_CORE_DPHY_TEST_OUT_31 = IOMUX_PAD(0x03BC, 0x00A8, 3, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN3__SDMA_DEBUG_CORE_STATE_3 = IOMUX_PAD(0x03BC, 0x00A8, 4, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN3__GPIO_4_19 = IOMUX_PAD(0x03BC, 0x00A8, 5, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN3__MMDC_MMDC_DEBUG_3 = IOMUX_PAD(0x03BC, 0x00A8, 6, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN3__PL301_SIM_MX6DL_PER1_HADDR_10 = IOMUX_PAD(0x03BC, 0x00A8, 7, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN3__LCDIF_CS = IOMUX_PAD(0x03BC, 0x00A8, 8, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN4__IPU1_DI0_PIN4 = IOMUX_PAD(0x03C0, 0x00AC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DI0_PIN4__LCDIF_BUSY = IOMUX_PAD(0x03C0, 0x00AC, 1, 0x08D8, 1, 0),
+ MX6_PAD_DI0_PIN4__AUDMUX_AUD6_RXD = IOMUX_PAD(0x03C0, 0x00AC, 2, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN4__USDHC1_WP = IOMUX_PAD(0x03C0, 0x00AC, 3, 0x092C, 0, 0),
+ MX6_PAD_DI0_PIN4__SDMA_DEBUG_YIELD = IOMUX_PAD(0x03C0, 0x00AC, 4, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN4__GPIO_4_20 = IOMUX_PAD(0x03C0, 0x00AC, 5, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN4__MMDC_MMDC_DEBUG_4 = IOMUX_PAD(0x03C0, 0x00AC, 6, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN4__PL301_SIM_MX6DL_PER1_HADDR_11 = IOMUX_PAD(0x03C0, 0x00AC, 7, 0x0000, 0, 0),
+ MX6_PAD_DI0_PIN4__LCDIF_RESET = IOMUX_PAD(0x03C0, 0x00AC, 8, 0x0000, 0, 0),
MX6_PAD_DISP0_DAT0__IPU1_DISP0_DAT_0 = IOMUX_PAD(0x03C4, 0x00B0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT0__LCDIF_DAT_0 = IOMUX_PAD(0x03C4, 0x00B0, 1, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT0__ECSPI3_SCLK = IOMUX_PAD(0x03C4, 0x00B0, 2, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT0__USDHC1_USDHC_DEBUG_0 = IOMUX_PAD(0x03C4, 0x00B0, 3, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT0__SDMA_DEBUG_CORE_RUN = IOMUX_PAD(0x03C4, 0x00B0, 4, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT0__GPIO_4_21 = IOMUX_PAD(0x03C4, 0x00B0, 5, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT0__MMDC_MMDC_DEBUG_5 = IOMUX_PAD(0x03C4, 0x00B0, 6, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT0__PL301_SIM_MX6DL_PER1_HSIZE_1 = IOMUX_PAD(0x03C4, 0x00B0, 7, 0x0000, 0, 0),
MX6_PAD_DISP0_DAT1__IPU1_DISP0_DAT_1 = IOMUX_PAD(0x03C8, 0x00B4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10 = IOMUX_PAD(0x03CC, 0x00B8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6_PAD_DISP0_DAT11__IPU1_DISP0_DAT_11 = IOMUX_PAD(0x03D0, 0x00BC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6_PAD_DISP0_DAT12__IPU1_DISP0_DAT_12 = IOMUX_PAD(0x03D4, 0x00C0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6_PAD_DISP0_DAT13__IPU1_DISP0_DAT_13 = IOMUX_PAD(0x03D8, 0x00C4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6_PAD_DISP0_DAT14__IPU1_DISP0_DAT_14 = IOMUX_PAD(0x03DC, 0x00C8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6_PAD_DISP0_DAT15__IPU1_DISP0_DAT_15 = IOMUX_PAD(0x03E0, 0x00CC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6_PAD_DISP0_DAT16__IPU1_DISP0_DAT_16 = IOMUX_PAD(0x03E4, 0x00D0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6_PAD_DISP0_DAT17__IPU1_DISP0_DAT_17 = IOMUX_PAD(0x03E8, 0x00D4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6_PAD_DISP0_DAT18__IPU1_DISP0_DAT_18 = IOMUX_PAD(0x03EC, 0x00D8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6_PAD_DISP0_DAT19__IPU1_DISP0_DAT_19 = IOMUX_PAD(0x03F0, 0x00DC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2 = IOMUX_PAD(0x03F4, 0x00E0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6_PAD_DISP0_DAT20__IPU1_DISP0_DAT_20 = IOMUX_PAD(0x03F8, 0x00E4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6_PAD_DISP0_DAT21__IPU1_DISP0_DAT_21 = IOMUX_PAD(0x03FC, 0x00E8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6_PAD_DISP0_DAT22__IPU1_DISP0_DAT_22 = IOMUX_PAD(0x0400, 0x00EC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
- MX6_PAD_DISP0_DAT23__IPU1_DISP0_DAT_23 = IOMUX_PAD(0x0404, 0x00F0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT1__LCDIF_DAT_1 = IOMUX_PAD(0x03C8, 0x00B4, 1, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT1__ECSPI3_MOSI = IOMUX_PAD(0x03C8, 0x00B4, 2, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT1__USDHC1_USDHC_DEBUG_1 = IOMUX_PAD(0x03C8, 0x00B4, 3, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT1__SDMA_DEBUG_EVENT_CHANNEL_SEL = IOMUX_PAD(0x03C8, 0x00B4, 4, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT1__GPIO_4_22 = IOMUX_PAD(0x03C8, 0x00B4, 5, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT1__MMDC_MMDC_DEBUG_6 = IOMUX_PAD(0x03C8, 0x00B4, 6, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT1__PL301_SIM_MX6DL_PER1_HADDR_12 = IOMUX_PAD(0x03C8, 0x00B4, 7, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10 = IOMUX_PAD(0x03CC, 0x00B8, 0, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT10__LCDIF_DAT_10 = IOMUX_PAD(0x03CC, 0x00B8, 1, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT10__USDHC1_USDHC_DEBUG_6 = IOMUX_PAD(0x03CC, 0x00B8, 3, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT10__SDMA_DEBUG_EVENT_CHANNEL_3 = IOMUX_PAD(0x03CC, 0x00B8, 4, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT10__GPIO_4_31 = IOMUX_PAD(0x03CC, 0x00B8, 5, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT10__MMDC_MMDC_DEBUG_15 = IOMUX_PAD(0x03CC, 0x00B8, 6, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT10__PL301_SIM_MX6DL_PER1_HADDR_21 = IOMUX_PAD(0x03CC, 0x00B8, 7, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT11__IPU1_DISP0_DAT_11 = IOMUX_PAD(0x03D0, 0x00BC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT11__LCDIF_DAT_11 = IOMUX_PAD(0x03D0, 0x00BC, 1, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT11__USDHC1_USDHC_DEBUG_7 = IOMUX_PAD(0x03D0, 0x00BC, 3, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT11__SDMA_DEBUG_EVENT_CHANNEL_4 = IOMUX_PAD(0x03D0, 0x00BC, 4, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT11__GPIO_5_5 = IOMUX_PAD(0x03D0, 0x00BC, 5, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT11__MMDC_MMDC_DEBUG_16 = IOMUX_PAD(0x03D0, 0x00BC, 6, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT11__PL301_SIM_MX6DL_PER1_HADDR_22 = IOMUX_PAD(0x03D0, 0x00BC, 7, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT12__IPU1_DISP0_DAT_12 = IOMUX_PAD(0x03D4, 0x00C0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT12__LCDIF_DAT_12 = IOMUX_PAD(0x03D4, 0x00C0, 1, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT12__SDMA_DEBUG_EVENT_CHANNEL_5 = IOMUX_PAD(0x03D4, 0x00C0, 4, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT12__GPIO_5_6 = IOMUX_PAD(0x03D4, 0x00C0, 5, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT12__MMDC_MMDC_DEBUG_17 = IOMUX_PAD(0x03D4, 0x00C0, 6, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT12__PL301_SIM_MX6DL_PER1_HADDR_23 = IOMUX_PAD(0x03D4, 0x00C0, 7, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT13__IPU1_DISP0_DAT_13 = IOMUX_PAD(0x03D8, 0x00C4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT13__LCDIF_DAT_13 = IOMUX_PAD(0x03D8, 0x00C4, 1, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS = IOMUX_PAD(0x03D8, 0x00C4, 3, 0x07BC, 0, 0),
+ MX6_PAD_DISP0_DAT13__SDMA_DEBUG_EVT_CHN_LINES_0 = IOMUX_PAD(0x03D8, 0x00C4, 4, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT13__GPIO_5_7 = IOMUX_PAD(0x03D8, 0x00C4, 5, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT13__MMDC_MMDC_DEBUG_18 = IOMUX_PAD(0x03D8, 0x00C4, 6, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT13__PL301_SIM_MX6DL_PER1_HADDR_24 = IOMUX_PAD(0x03D8, 0x00C4, 7, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT14__IPU1_DISP0_DAT_14 = IOMUX_PAD(0x03DC, 0x00C8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT14__LCDIF_DAT_14 = IOMUX_PAD(0x03DC, 0x00C8, 1, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC = IOMUX_PAD(0x03DC, 0x00C8, 3, 0x07B8, 0, 0),
+ MX6_PAD_DISP0_DAT14__SDMA_DEBUG_EVT_CHN_LINES_1 = IOMUX_PAD(0x03DC, 0x00C8, 4, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT14__GPIO_5_8 = IOMUX_PAD(0x03DC, 0x00C8, 5, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT14__MMDC_MMDC_DEBUG_19 = IOMUX_PAD(0x03DC, 0x00C8, 6, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT14__PL301_SIM_MX6DL_PER1_HSIZE_2 = IOMUX_PAD(0x03DC, 0x00C8, 7, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT15__IPU1_DISP0_DAT_15 = IOMUX_PAD(0x03E0, 0x00CC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT15__LCDIF_DAT_15 = IOMUX_PAD(0x03E0, 0x00CC, 1, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT15__ECSPI1_SS1 = IOMUX_PAD(0x03E0, 0x00CC, 2, 0x07E8, 0, 0),
+ MX6_PAD_DISP0_DAT15__ECSPI2_SS1 = IOMUX_PAD(0x03E0, 0x00CC, 3, 0x0804, 0, 0),
+ MX6_PAD_DISP0_DAT15__SDMA_DEBUG_EVT_CHN_LINES_2 = IOMUX_PAD(0x03E0, 0x00CC, 4, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT15__GPIO_5_9 = IOMUX_PAD(0x03E0, 0x00CC, 5, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT15__MMDC_MMDC_DEBUG_20 = IOMUX_PAD(0x03E0, 0x00CC, 6, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT15__PL301_SIM_MX6DL_PER1_HADDR_25 = IOMUX_PAD(0x03E0, 0x00CC, 7, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT16__IPU1_DISP0_DAT_16 = IOMUX_PAD(0x03E4, 0x00D0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT16__LCDIF_DAT_16 = IOMUX_PAD(0x03E4, 0x00D0, 1, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT16__ECSPI2_MOSI = IOMUX_PAD(0x03E4, 0x00D0, 2, 0x07FC, 1, 0),
+ MX6_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC = IOMUX_PAD(0x03E4, 0x00D0, 3, 0x07C0, 0, 0),
+ MX6_PAD_DISP0_DAT16__SDMA_SDMA_EXT_EVENT_0 = IOMUX_PAD(0x03E4, 0x00D0, 4, 0x08E8, 0, 0),
+ MX6_PAD_DISP0_DAT16__GPIO_5_10 = IOMUX_PAD(0x03E4, 0x00D0, 5, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT16__MMDC_MMDC_DEBUG_21 = IOMUX_PAD(0x03E4, 0x00D0, 6, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT16__PL301_SIM_MX6DL_PER1_HADDR_26 = IOMUX_PAD(0x03E4, 0x00D0, 7, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT17__IPU1_DISP0_DAT_17 = IOMUX_PAD(0x03E8, 0x00D4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT17__LCDIF_DAT_17 = IOMUX_PAD(0x03E8, 0x00D4, 1, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT17__ECSPI2_MISO = IOMUX_PAD(0x03E8, 0x00D4, 2, 0x07F8, 1, 0),
+ MX6_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD = IOMUX_PAD(0x03E8, 0x00D4, 3, 0x07B4, 0, 0),
+ MX6_PAD_DISP0_DAT17__SDMA_SDMA_EXT_EVENT_1 = IOMUX_PAD(0x03E8, 0x00D4, 4, 0x08EC, 0, 0),
+ MX6_PAD_DISP0_DAT17__GPIO_5_11 = IOMUX_PAD(0x03E8, 0x00D4, 5, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT17__MMDC_MMDC_DEBUG_22 = IOMUX_PAD(0x03E8, 0x00D4, 6, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT17__PL301_SIM_MX6DL_PER1_HADDR_27 = IOMUX_PAD(0x03E8, 0x00D4, 7, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT18__IPU1_DISP0_DAT_18 = IOMUX_PAD(0x03EC, 0x00D8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT18__LCDIF_DAT_18 = IOMUX_PAD(0x03EC, 0x00D8, 1, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT18__ECSPI2_SS0 = IOMUX_PAD(0x03EC, 0x00D8, 2, 0x0800, 1, 0),
+ MX6_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS = IOMUX_PAD(0x03EC, 0x00D8, 3, 0x07C4, 0, 0),
+ MX6_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS = IOMUX_PAD(0x03EC, 0x00D8, 4, 0x07A4, 0, 0),
+ MX6_PAD_DISP0_DAT18__GPIO_5_12 = IOMUX_PAD(0x03EC, 0x00D8, 5, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT18__MMDC_MMDC_DEBUG_23 = IOMUX_PAD(0x03EC, 0x00D8, 6, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT18__WEIM_WEIM_CS_2 = IOMUX_PAD(0x03EC, 0x00D8, 7, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT19__IPU1_DISP0_DAT_19 = IOMUX_PAD(0x03F0, 0x00DC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT19__LCDIF_DAT_19 = IOMUX_PAD(0x03F0, 0x00DC, 1, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT19__ECSPI2_SCLK = IOMUX_PAD(0x03F0, 0x00DC, 2, 0x07F4, 1, 0),
+ MX6_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD = IOMUX_PAD(0x03F0, 0x00DC, 3, 0x07B0, 0, 0),
+ MX6_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC = IOMUX_PAD(0x03F0, 0x00DC, 4, 0x07A0, 0, 0),
+ MX6_PAD_DISP0_DAT19__GPIO_5_13 = IOMUX_PAD(0x03F0, 0x00DC, 5, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT19__MMDC_MMDC_DEBUG_24 = IOMUX_PAD(0x03F0, 0x00DC, 6, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT19__WEIM_WEIM_CS_3 = IOMUX_PAD(0x03F0, 0x00DC, 7, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2 = IOMUX_PAD(0x03F4, 0x00E0, 0, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT2__LCDIF_DAT_2 = IOMUX_PAD(0x03F4, 0x00E0, 1, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT2__ECSPI3_MISO = IOMUX_PAD(0x03F4, 0x00E0, 2, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT2__USDHC1_USDHC_DEBUG_2 = IOMUX_PAD(0x03F4, 0x00E0, 3, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT2__SDMA_DEBUG_MODE = IOMUX_PAD(0x03F4, 0x00E0, 4, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT2__GPIO_4_23 = IOMUX_PAD(0x03F4, 0x00E0, 5, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT2__MMDC_MMDC_DEBUG_7 = IOMUX_PAD(0x03F4, 0x00E0, 6, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT2__PL301_SIM_MX6DL_PER1_HADDR_13 = IOMUX_PAD(0x03F4, 0x00E0, 7, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT20__IPU1_DISP0_DAT_20 = IOMUX_PAD(0x03F8, 0x00E4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT20__LCDIF_DAT_20 = IOMUX_PAD(0x03F8, 0x00E4, 1, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT20__ECSPI1_SCLK = IOMUX_PAD(0x03F8, 0x00E4, 2, 0x07D8, 1, 0),
+ MX6_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC = IOMUX_PAD(0x03F8, 0x00E4, 3, 0x07A8, 0, 0),
+ MX6_PAD_DISP0_DAT20__SDMA_DEBUG_EVT_CHN_LINES_7 = IOMUX_PAD(0x03F8, 0x00E4, 4, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT20__GPIO_5_14 = IOMUX_PAD(0x03F8, 0x00E4, 5, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT20__MMDC_MMDC_DEBUG_25 = IOMUX_PAD(0x03F8, 0x00E4, 6, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT20__PL301_SIM_MX6DL_PER1_HADDR_28 = IOMUX_PAD(0x03F8, 0x00E4, 7, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT21__IPU1_DISP0_DAT_21 = IOMUX_PAD(0x03FC, 0x00E8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT21__LCDIF_DAT_21 = IOMUX_PAD(0x03FC, 0x00E8, 1, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT21__ECSPI1_MOSI = IOMUX_PAD(0x03FC, 0x00E8, 2, 0x07E0, 1, 0),
+ MX6_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD = IOMUX_PAD(0x03FC, 0x00E8, 3, 0x079C, 0, 0),
+ MX6_PAD_DISP0_DAT21__SDMA_DEBUG_BUS_DEVICE_0 = IOMUX_PAD(0x03FC, 0x00E8, 4, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT21__GPIO_5_15 = IOMUX_PAD(0x03FC, 0x00E8, 5, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT21__MMDC_MMDC_DEBUG_26 = IOMUX_PAD(0x03FC, 0x00E8, 6, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT21__PL301_SIM_MX6DL_PER1_HADDR_29 = IOMUX_PAD(0x03FC, 0x00E8, 7, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT22__IPU1_DISP0_DAT_22 = IOMUX_PAD(0x0400, 0x00EC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT22__LCDIF_DAT_22 = IOMUX_PAD(0x0400, 0x00EC, 1, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT22__ECSPI1_MISO = IOMUX_PAD(0x0400, 0x00EC, 2, 0x07DC, 1, 0),
+ MX6_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS = IOMUX_PAD(0x0400, 0x00EC, 3, 0x07AC, 0, 0),
+ MX6_PAD_DISP0_DAT22__SDMA_DEBUG_BUS_DEVICE_1 = IOMUX_PAD(0x0400, 0x00EC, 4, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT22__GPIO_5_16 = IOMUX_PAD(0x0400, 0x00EC, 5, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT22__MMDC_MMDC_DEBUG_27 = IOMUX_PAD(0x0400, 0x00EC, 6, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT22__PL301_SIM_MX6DL_PER1_HADDR_30 = IOMUX_PAD(0x0400, 0x00EC, 7, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT23__IPU1_DISP0_DAT_23 = IOMUX_PAD(0x0404, 0x00F0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT23__LCDIF_DAT_23 = IOMUX_PAD(0x0404, 0x00F0, 1, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT23__ECSPI1_SS0 = IOMUX_PAD(0x0404, 0x00F0, 2, 0x07E4, 1, 0),
+ MX6_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD = IOMUX_PAD(0x0404, 0x00F0, 3, 0x0798, 0, 0),
+ MX6_PAD_DISP0_DAT23__SDMA_DEBUG_BUS_DEVICE_2 = IOMUX_PAD(0x0404, 0x00F0, 4, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT23__GPIO_5_17 = IOMUX_PAD(0x0404, 0x00F0, 5, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT23__MMDC_MMDC_DEBUG_28 = IOMUX_PAD(0x0404, 0x00F0, 6, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT23__PL301_SIM_MX6DL_PER1_HADDR_31 = IOMUX_PAD(0x0404, 0x00F0, 7, 0x0000, 0, 0),
MX6_PAD_DISP0_DAT3__IPU1_DISP0_DAT_3 = IOMUX_PAD(0x0408, 0x00F4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT3__LCDIF_DAT_3 = IOMUX_PAD(0x0408, 0x00F4, 1, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT3__ECSPI3_SS0 = IOMUX_PAD(0x0408, 0x00F4, 2, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT3__USDHC1_USDHC_DEBUG_3 = IOMUX_PAD(0x0408, 0x00F4, 3, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT3__SDMA_DEBUG_BUS_ERROR = IOMUX_PAD(0x0408, 0x00F4, 4, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT3__GPIO_4_24 = IOMUX_PAD(0x0408, 0x00F4, 5, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT3__MMDC_MMDC_DEBUG_8 = IOMUX_PAD(0x0408, 0x00F4, 6, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT3__PL301_SIM_MX6DL_PER1_HADDR_14 = IOMUX_PAD(0x0408, 0x00F4, 7, 0x0000, 0, 0),
MX6_PAD_DISP0_DAT4__IPU1_DISP0_DAT_4 = IOMUX_PAD(0x040C, 0x00F8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT4__LCDIF_DAT_4 = IOMUX_PAD(0x040C, 0x00F8, 1, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT4__ECSPI3_SS1 = IOMUX_PAD(0x040C, 0x00F8, 2, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT4__USDHC1_USDHC_DEBUG_4 = IOMUX_PAD(0x040C, 0x00F8, 3, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB = IOMUX_PAD(0x040C, 0x00F8, 4, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT4__GPIO_4_25 = IOMUX_PAD(0x040C, 0x00F8, 5, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT4__MMDC_MMDC_DEBUG_9 = IOMUX_PAD(0x040C, 0x00F8, 6, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT4__PL301_SIM_MX6DL_PER1_HADDR_15 = IOMUX_PAD(0x040C, 0x00F8, 7, 0x0000, 0, 0),
MX6_PAD_DISP0_DAT5__IPU1_DISP0_DAT_5 = IOMUX_PAD(0x0410, 0x00FC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT5__LCDIF_DAT_5 = IOMUX_PAD(0x0410, 0x00FC, 1, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT5__ECSPI3_SS2 = IOMUX_PAD(0x0410, 0x00FC, 2, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT5__AUDMUX_AUD6_RXFS = IOMUX_PAD(0x0410, 0x00FC, 3, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT5__SDMA_DEBUG_MATCHED_DMBUS = IOMUX_PAD(0x0410, 0x00FC, 4, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT5__GPIO_4_26 = IOMUX_PAD(0x0410, 0x00FC, 5, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT5__MMDC_MMDC_DEBUG_10 = IOMUX_PAD(0x0410, 0x00FC, 6, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT5__PL301_SIM_MX6DL_PER1_HADDR_16 = IOMUX_PAD(0x0410, 0x00FC, 7, 0x0000, 0, 0),
MX6_PAD_DISP0_DAT6__IPU1_DISP0_DAT_6 = IOMUX_PAD(0x0414, 0x0100, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT6__LCDIF_DAT_6 = IOMUX_PAD(0x0414, 0x0100, 1, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT6__ECSPI3_SS3 = IOMUX_PAD(0x0414, 0x0100, 2, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT6__AUDMUX_AUD6_RXC = IOMUX_PAD(0x0414, 0x0100, 3, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT6__SDMA_DEBUG_RTBUFFER_WRITE = IOMUX_PAD(0x0414, 0x0100, 4, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT6__GPIO_4_27 = IOMUX_PAD(0x0414, 0x0100, 5, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT6__MMDC_MMDC_DEBUG_11 = IOMUX_PAD(0x0414, 0x0100, 6, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT6__PL301_SIM_MX6DL_PER1_HADDR_17 = IOMUX_PAD(0x0414, 0x0100, 7, 0x0000, 0, 0),
MX6_PAD_DISP0_DAT7__IPU1_DISP0_DAT_7 = IOMUX_PAD(0x0418, 0x0104, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT7__LCDIF_DAT_7 = IOMUX_PAD(0x0418, 0x0104, 1, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT7__ECSPI3_RDY = IOMUX_PAD(0x0418, 0x0104, 2, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT7__USDHC1_USDHC_DEBUG_5 = IOMUX_PAD(0x0418, 0x0104, 3, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT7__SDMA_DEBUG_EVENT_CHANNEL_0 = IOMUX_PAD(0x0418, 0x0104, 4, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT7__GPIO_4_28 = IOMUX_PAD(0x0418, 0x0104, 5, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT7__MMDC_MMDC_DEBUG_12 = IOMUX_PAD(0x0418, 0x0104, 6, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT7__PL301_SIM_MX6DL_PER1_HADDR_18 = IOMUX_PAD(0x0418, 0x0104, 7, 0x0000, 0, 0),
MX6_PAD_DISP0_DAT8__IPU1_DISP0_DAT_8 = IOMUX_PAD(0x041C, 0x0108, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT8__LCDIF_DAT_8 = IOMUX_PAD(0x041C, 0x0108, 1, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT8__PWM1_PWMO = IOMUX_PAD(0x041C, 0x0108, 2, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT8__WDOG1_WDOG_B = IOMUX_PAD(0x041C, 0x0108, 3, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT8__SDMA_DEBUG_EVENT_CHANNEL_1 = IOMUX_PAD(0x041C, 0x0108, 4, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT8__GPIO_4_29 = IOMUX_PAD(0x041C, 0x0108, 5, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT8__MMDC_MMDC_DEBUG_13 = IOMUX_PAD(0x041C, 0x0108, 6, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT8__PL301_SIM_MX6DL_PER1_HADDR_19 = IOMUX_PAD(0x041C, 0x0108, 7, 0x0000, 0, 0),
MX6_PAD_DISP0_DAT9__IPU1_DISP0_DAT_9 = IOMUX_PAD(0x0420, 0x010C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
+ MX6_PAD_DISP0_DAT9__LCDIF_DAT_9 = IOMUX_PAD(0x0420, 0x010C, 1, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT9__PWM2_PWMO = IOMUX_PAD(0x0420, 0x010C, 2, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT9__WDOG2_WDOG_B = IOMUX_PAD(0x0420, 0x010C, 3, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT9__SDMA_DEBUG_EVENT_CHANNEL_2 = IOMUX_PAD(0x0420, 0x010C, 4, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT9__GPIO_4_30 = IOMUX_PAD(0x0420, 0x010C, 5, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT9__MMDC_MMDC_DEBUG_14 = IOMUX_PAD(0x0420, 0x010C, 6, 0x0000, 0, 0),
+ MX6_PAD_DISP0_DAT9__PL301_SIM_MX6DL_PER1_HADDR_20 = IOMUX_PAD(0x0420, 0x010C, 7, 0x0000, 0, 0),
+ MX6_PAD_DRAM_A0__MMDC_DRAM_A_0 = IOMUX_PAD(0x0424, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_A1__MMDC_DRAM_A_1 = IOMUX_PAD(0x0428, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_A10__MMDC_DRAM_A_10 = IOMUX_PAD(0x042C, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_A11__MMDC_DRAM_A_11 = IOMUX_PAD(0x0430, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_A12__MMDC_DRAM_A_12 = IOMUX_PAD(0x0434, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_A13__MMDC_DRAM_A_13 = IOMUX_PAD(0x0438, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_A14__MMDC_DRAM_A_14 = IOMUX_PAD(0x043C, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_A15__MMDC_DRAM_A_15 = IOMUX_PAD(0x0440, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_A2__MMDC_DRAM_A_2 = IOMUX_PAD(0x0444, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_A3__MMDC_DRAM_A_3 = IOMUX_PAD(0x0448, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_A4__MMDC_DRAM_A_4 = IOMUX_PAD(0x044C, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_A5__MMDC_DRAM_A_5 = IOMUX_PAD(0x0450, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_A6__MMDC_DRAM_A_6 = IOMUX_PAD(0x0454, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_A7__MMDC_DRAM_A_7 = IOMUX_PAD(0x0458, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_A8__MMDC_DRAM_A_8 = IOMUX_PAD(0x045C, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_A9__MMDC_DRAM_A_9 = IOMUX_PAD(0x0460, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_CAS__MMDC_DRAM_CAS = IOMUX_PAD(0x0464, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_CS0__MMDC_DRAM_CS_0 = IOMUX_PAD(0x0468, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_CS1__MMDC_DRAM_CS_1 = IOMUX_PAD(0x046C, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D0__MMDC_DRAM_D_0 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D1__MMDC_DRAM_D_1 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D10__MMDC_DRAM_D_10 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D11__MMDC_DRAM_D_11 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D12__MMDC_DRAM_D_12 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D13__MMDC_DRAM_D_13 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D14__MMDC_DRAM_D_14 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D15__MMDC_DRAM_D_15 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D16__MMDC_DRAM_D_16 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D17__MMDC_DRAM_D_17 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D18__MMDC_DRAM_D_18 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D19__MMDC_DRAM_D_19 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D2__MMDC_DRAM_D_2 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D20__MMDC_DRAM_D_20 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D21__MMDC_DRAM_D_21 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D22__MMDC_DRAM_D_22 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D23__MMDC_DRAM_D_23 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D24__MMDC_DRAM_D_24 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D25__MMDC_DRAM_D_25 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D26__MMDC_DRAM_D_26 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D27__MMDC_DRAM_D_27 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D28__MMDC_DRAM_D_28 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D29__MMDC_DRAM_D_29 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D3__MMDC_DRAM_D_3 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D30__MMDC_DRAM_D_30 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D31__MMDC_DRAM_D_31 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D32__MMDC_DRAM_D_32 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D33__MMDC_DRAM_D_33 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D34__MMDC_DRAM_D_34 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D35__MMDC_DRAM_D_35 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D36__MMDC_DRAM_D_36 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D37__MMDC_DRAM_D_37 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D38__MMDC_DRAM_D_38 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D39__MMDC_DRAM_D_39 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D4__MMDC_DRAM_D_4 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D40__MMDC_DRAM_D_40 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D41__MMDC_DRAM_D_41 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D42__MMDC_DRAM_D_42 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D43__MMDC_DRAM_D_43 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D44__MMDC_DRAM_D_44 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D45__MMDC_DRAM_D_45 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D46__MMDC_DRAM_D_46 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D47__MMDC_DRAM_D_47 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D48__MMDC_DRAM_D_48 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D49__MMDC_DRAM_D_49 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D5__MMDC_DRAM_D_5 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D50__MMDC_DRAM_D_50 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D51__MMDC_DRAM_D_51 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D52__MMDC_DRAM_D_52 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D53__MMDC_DRAM_D_53 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D54__MMDC_DRAM_D_54 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D55__MMDC_DRAM_D_55 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D56__MMDC_DRAM_D_56 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D57__MMDC_DRAM_D_57 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D58__MMDC_DRAM_D_58 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D59__MMDC_DRAM_D_59 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D6__MMDC_DRAM_D_6 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D60__MMDC_DRAM_D_60 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D61__MMDC_DRAM_D_61 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D62__MMDC_DRAM_D_62 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D63__MMDC_DRAM_D_63 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D7__MMDC_DRAM_D_7 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D8__MMDC_DRAM_D_8 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_D9__MMDC_DRAM_D_9 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_DQM0__MMDC_DRAM_DQM_0 = IOMUX_PAD(0x0470, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_DQM1__MMDC_DRAM_DQM_1 = IOMUX_PAD(0x0474, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_DQM2__MMDC_DRAM_DQM_2 = IOMUX_PAD(0x0478, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_DQM3__MMDC_DRAM_DQM_3 = IOMUX_PAD(0x047C, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_DQM4__MMDC_DRAM_DQM_4 = IOMUX_PAD(0x0480, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_DQM5__MMDC_DRAM_DQM_5 = IOMUX_PAD(0x0484, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_DQM6__MMDC_DRAM_DQM_6 = IOMUX_PAD(0x0488, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_DQM7__MMDC_DRAM_DQM_7 = IOMUX_PAD(0x048C, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_RAS__MMDC_DRAM_RAS = IOMUX_PAD(0x0490, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_RESET__MMDC_DRAM_RESET = IOMUX_PAD(0x0494, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_SDBA0__MMDC_DRAM_SDBA_0 = IOMUX_PAD(0x0498, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_SDBA1__MMDC_DRAM_SDBA_1 = IOMUX_PAD(0x049C, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_SDBA2__MMDC_DRAM_SDBA_2 = IOMUX_PAD(0x04A0, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_SDCKE0__MMDC_DRAM_SDCKE_0 = IOMUX_PAD(0x04A4, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_SDCKE1__MMDC_DRAM_SDCKE_1 = IOMUX_PAD(0x04A8, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_SDCLK_0__MMDC_DRAM_SDCLK0 = IOMUX_PAD(0x04AC, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_SDCLK_1__MMDC_DRAM_SDCLK1 = IOMUX_PAD(0x04B0, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_SDODT0__MMDC_DRAM_ODT_0 = IOMUX_PAD(0x04B4, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_SDODT1__MMDC_DRAM_ODT_1 = IOMUX_PAD(0x04B8, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_SDQS0__MMDC_DRAM_SDQS_0 = IOMUX_PAD(0x04BC, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_SDQS1__MMDC_DRAM_SDQS_1 = IOMUX_PAD(0x04C0, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_SDQS2__MMDC_DRAM_SDQS_2 = IOMUX_PAD(0x04C4, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_SDQS3__MMDC_DRAM_SDQS_3 = IOMUX_PAD(0x04C8, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_SDQS4__MMDC_DRAM_SDQS_4 = IOMUX_PAD(0x04CC, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_SDQS5__MMDC_DRAM_SDQS_5 = IOMUX_PAD(0x04D0, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_SDQS6__MMDC_DRAM_SDQS_6 = IOMUX_PAD(0x04D4, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_SDQS7__MMDC_DRAM_SDQS_7 = IOMUX_PAD(0x04D8, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_DRAM_SDWE__MMDC_DRAM_SDWE = IOMUX_PAD(0x04DC, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_A16__WEIM_WEIM_A_16 = IOMUX_PAD(0x04E0, 0x0110, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_A16__IPU1_DI1_DISP_CLK = IOMUX_PAD(0x04E0, 0x0110, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_A16__IPU1_CSI1_PIXCLK = IOMUX_PAD(0x04E0, 0x0110, 2, 0x08B8, 0, 0),
+ MX6_PAD_EIM_A16__MIPI_CORE_DPHY_TEST_OUT_23 = IOMUX_PAD(0x04E0, 0x0110, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_A16__GPIO_2_22 = IOMUX_PAD(0x04E0, 0x0110, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_A16__TPSMP_HDATA_6 = IOMUX_PAD(0x04E0, 0x0110, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_A16__SRC_BT_CFG_16 = IOMUX_PAD(0x04E0, 0x0110, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_A16__EPDC_SDDO_0 = IOMUX_PAD(0x04E0, 0x0110, 8, 0x0000, 0, 0),
+ MX6_PAD_EIM_A17__WEIM_WEIM_A_17 = IOMUX_PAD(0x04E4, 0x0114, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_A17__IPU1_DISP1_DAT_12 = IOMUX_PAD(0x04E4, 0x0114, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_A17__IPU1_CSI1_D_12 = IOMUX_PAD(0x04E4, 0x0114, 2, 0x0890, 0, 0),
+ MX6_PAD_EIM_A17__MIPI_CORE_DPHY_TEST_OUT_22 = IOMUX_PAD(0x04E4, 0x0114, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_A17__GPIO_2_21 = IOMUX_PAD(0x04E4, 0x0114, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_A17__TPSMP_HDATA_5 = IOMUX_PAD(0x04E4, 0x0114, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_A17__SRC_BT_CFG_17 = IOMUX_PAD(0x04E4, 0x0114, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_A17__EPDC_PWRSTAT = IOMUX_PAD(0x04E4, 0x0114, 8, 0x0000, 0, 0),
+ MX6_PAD_EIM_A18__WEIM_WEIM_A_18 = IOMUX_PAD(0x04E8, 0x0118, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_A18__IPU1_DISP1_DAT_13 = IOMUX_PAD(0x04E8, 0x0118, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_A18__IPU1_CSI1_D_13 = IOMUX_PAD(0x04E8, 0x0118, 2, 0x0894, 0, 0),
+ MX6_PAD_EIM_A18__MIPI_CORE_DPHY_TEST_OUT_21 = IOMUX_PAD(0x04E8, 0x0118, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_A18__GPIO_2_20 = IOMUX_PAD(0x04E8, 0x0118, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_A18__TPSMP_HDATA_4 = IOMUX_PAD(0x04E8, 0x0118, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_A18__SRC_BT_CFG_18 = IOMUX_PAD(0x04E8, 0x0118, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_A18__EPDC_PWRCTRL_0 = IOMUX_PAD(0x04E8, 0x0118, 8, 0x0000, 0, 0),
+ MX6_PAD_EIM_A19__WEIM_WEIM_A_19 = IOMUX_PAD(0x04EC, 0x011C, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_A19__IPU1_DISP1_DAT_14 = IOMUX_PAD(0x04EC, 0x011C, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_A19__IPU1_CSI1_D_14 = IOMUX_PAD(0x04EC, 0x011C, 2, 0x0898, 0, 0),
+ MX6_PAD_EIM_A19__MIPI_CORE_DPHY_TEST_OUT_20 = IOMUX_PAD(0x04EC, 0x011C, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_A19__GPIO_2_19 = IOMUX_PAD(0x04EC, 0x011C, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_A19__TPSMP_HDATA_3 = IOMUX_PAD(0x04EC, 0x011C, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_A19__SRC_BT_CFG_19 = IOMUX_PAD(0x04EC, 0x011C, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_A19__EPDC_PWRCTRL_1 = IOMUX_PAD(0x04EC, 0x011C, 8, 0x0000, 0, 0),
+ MX6_PAD_EIM_A20__WEIM_WEIM_A_20 = IOMUX_PAD(0x04F0, 0x0120, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_A20__IPU1_DISP1_DAT_15 = IOMUX_PAD(0x04F0, 0x0120, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_A20__IPU1_CSI1_D_15 = IOMUX_PAD(0x04F0, 0x0120, 2, 0x089C, 0, 0),
+ MX6_PAD_EIM_A20__MIPI_CORE_DPHY_TEST_OUT_19 = IOMUX_PAD(0x04F0, 0x0120, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_A20__GPIO_2_18 = IOMUX_PAD(0x04F0, 0x0120, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_A20__TPSMP_HDATA_2 = IOMUX_PAD(0x04F0, 0x0120, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_A20__SRC_BT_CFG_20 = IOMUX_PAD(0x04F0, 0x0120, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_A20__EPDC_PWRCTRL_2 = IOMUX_PAD(0x04F0, 0x0120, 8, 0x0000, 0, 0),
+ MX6_PAD_EIM_A21__WEIM_WEIM_A_21 = IOMUX_PAD(0x04F4, 0x0124, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_A21__IPU1_DISP1_DAT_16 = IOMUX_PAD(0x04F4, 0x0124, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_A21__IPU1_CSI1_D_16 = IOMUX_PAD(0x04F4, 0x0124, 2, 0x08A0, 0, 0),
+ MX6_PAD_EIM_A21__MIPI_CORE_DPHY_TEST_OUT_18 = IOMUX_PAD(0x04F4, 0x0124, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_A21__GPIO_2_17 = IOMUX_PAD(0x04F4, 0x0124, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_A21__TPSMP_HDATA_1 = IOMUX_PAD(0x04F4, 0x0124, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_A21__SRC_BT_CFG_21 = IOMUX_PAD(0x04F4, 0x0124, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_A21__EPDC_GDCLK = IOMUX_PAD(0x04F4, 0x0124, 8, 0x0000, 0, 0),
+ MX6_PAD_EIM_A22__WEIM_WEIM_A_22 = IOMUX_PAD(0x04F8, 0x0128, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_A22__IPU1_DISP1_DAT_17 = IOMUX_PAD(0x04F8, 0x0128, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_A22__IPU1_CSI1_D_17 = IOMUX_PAD(0x04F8, 0x0128, 2, 0x08A4, 0, 0),
+ MX6_PAD_EIM_A22__GPIO_2_16 = IOMUX_PAD(0x04F8, 0x0128, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_A22__TPSMP_HDATA_0 = IOMUX_PAD(0x04F8, 0x0128, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_A22__SRC_BT_CFG_22 = IOMUX_PAD(0x04F8, 0x0128, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_A22__EPDC_GDSP = IOMUX_PAD(0x04F8, 0x0128, 8, 0x0000, 0, 0),
+ MX6_PAD_EIM_A23__WEIM_WEIM_A_23 = IOMUX_PAD(0x04FC, 0x012C, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_A23__IPU1_DISP1_DAT_18 = IOMUX_PAD(0x04FC, 0x012C, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_A23__IPU1_CSI1_D_18 = IOMUX_PAD(0x04FC, 0x012C, 2, 0x08A8, 0, 0),
+ MX6_PAD_EIM_A23__IPU1_SISG_3 = IOMUX_PAD(0x04FC, 0x012C, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_A23__GPIO_6_6 = IOMUX_PAD(0x04FC, 0x012C, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_A23__PL301_SIM_MX6DL_PER1_HPROT_3 = IOMUX_PAD(0x04FC, 0x012C, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_A23__SRC_BT_CFG_23 = IOMUX_PAD(0x04FC, 0x012C, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_A23__EPDC_GDOE = IOMUX_PAD(0x04FC, 0x012C, 8, 0x0000, 0, 0),
+ MX6_PAD_EIM_A24__WEIM_WEIM_A_24 = IOMUX_PAD(0x0500, 0x0130, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_A24__IPU1_DISP1_DAT_19 = IOMUX_PAD(0x0500, 0x0130, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_A24__IPU1_CSI1_D_19 = IOMUX_PAD(0x0500, 0x0130, 2, 0x08AC, 0, 0),
+ MX6_PAD_EIM_A24__IPU1_SISG_2 = IOMUX_PAD(0x0500, 0x0130, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_A24__GPIO_5_4 = IOMUX_PAD(0x0500, 0x0130, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_A24__PL301_SIM_MX6DL_PER1_HPROT_2 = IOMUX_PAD(0x0500, 0x0130, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_A24__SRC_BT_CFG_24 = IOMUX_PAD(0x0500, 0x0130, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_A24__EPDC_GDRL = IOMUX_PAD(0x0500, 0x0130, 8, 0x0000, 0, 0),
+ MX6_PAD_EIM_A25__WEIM_WEIM_A_25 = IOMUX_PAD(0x0504, 0x0134, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_A25__ECSPI4_SS1 = IOMUX_PAD(0x0504, 0x0134, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_A25__ECSPI2_RDY = IOMUX_PAD(0x0504, 0x0134, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_A25__IPU1_DI1_PIN12 = IOMUX_PAD(0x0504, 0x0134, 3, 0x0000, 0, 0),
+ MX6_PAD_EIM_A25__IPU1_DI0_D1_CS = IOMUX_PAD(0x0504, 0x0134, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_A25__GPIO_5_2 = IOMUX_PAD(0x0504, 0x0134, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_A25__HDMI_TX_CEC_LINE = IOMUX_PAD(0x0504, 0x0134, 6, 0x085C, 0, 0),
+ MX6_PAD_EIM_A25__PL301_SIM_MX6DL_PER1_HBURST_0 = IOMUX_PAD(0x0504, 0x0134, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_A25__EPDC_SDDO_15 = IOMUX_PAD(0x0504, 0x0134, 8, 0x0000, 0, 0),
+ MX6_PAD_EIM_A25__WEIM_ACLK_FREERUN = IOMUX_PAD(0x0504, 0x0134, 9, 0x0000, 0, 0),
+ MX6_PAD_EIM_BCLK__WEIM_WEIM_BCLK = IOMUX_PAD(0x0508, 0x0138, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_BCLK__IPU1_DI1_PIN16 = IOMUX_PAD(0x0508, 0x0138, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_BCLK__GPIO_6_31 = IOMUX_PAD(0x0508, 0x0138, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_BCLK__TPSMP_HDATA_31 = IOMUX_PAD(0x0508, 0x0138, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_BCLK__EPDC_SDCE_9 = IOMUX_PAD(0x0508, 0x0138, 8, 0x0000, 0, 0),
+ MX6_PAD_EIM_CS0__WEIM_WEIM_CS_0 = IOMUX_PAD(0x050C, 0x013C, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_CS0__IPU1_DI1_PIN5 = IOMUX_PAD(0x050C, 0x013C, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_CS0__ECSPI2_SCLK = IOMUX_PAD(0x050C, 0x013C, 2, 0x07F4, 2, 0),
+ MX6_PAD_EIM_CS0__MIPI_CORE_DPHY_TEST_OUT_24 = IOMUX_PAD(0x050C, 0x013C, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_CS0__GPIO_2_23 = IOMUX_PAD(0x050C, 0x013C, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_CS0__TPSMP_HDATA_7 = IOMUX_PAD(0x050C, 0x013C, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_CS0__EPDC_SDDO_6 = IOMUX_PAD(0x050C, 0x013C, 8, 0x0000, 0, 0),
+ MX6_PAD_EIM_CS1__WEIM_WEIM_CS_1 = IOMUX_PAD(0x0510, 0x0140, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_CS1__IPU1_DI1_PIN6 = IOMUX_PAD(0x0510, 0x0140, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_CS1__ECSPI2_MOSI = IOMUX_PAD(0x0510, 0x0140, 2, 0x07FC, 2, 0),
+ MX6_PAD_EIM_CS1__MIPI_CORE_DPHY_TEST_OUT_25 = IOMUX_PAD(0x0510, 0x0140, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_CS1__GPIO_2_24 = IOMUX_PAD(0x0510, 0x0140, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_CS1__TPSMP_HDATA_8 = IOMUX_PAD(0x0510, 0x0140, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_CS1__EPDC_SDDO_8 = IOMUX_PAD(0x0510, 0x0140, 8, 0x0000, 0, 0),
+ MX6_PAD_EIM_D16__WEIM_WEIM_D_16 = IOMUX_PAD(0x0514, 0x0144, 0, 0x0000, 0, 0),
MX6_PAD_EIM_D16__ECSPI1_SCLK = IOMUX_PAD(0x0514, 0x0144, 1, 0x07D8, 2, 0),
+ MX6_PAD_EIM_D16__IPU1_DI0_PIN5 = IOMUX_PAD(0x0514, 0x0144, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_D16__IPU1_CSI1_D_18 = IOMUX_PAD(0x0514, 0x0144, 3, 0x08A8, 1, 0),
+ MX6_PAD_EIM_D16__HDMI_TX_DDC_SDA = IOMUX_PAD(0x0514, 0x0144, 4, 0x0864, 0, 0),
+ MX6_PAD_EIM_D16__GPIO_3_16 = IOMUX_PAD(0x0514, 0x0144, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_D16__I2C2_SDA = IOMUX_PAD(0x0514, 0x0144, 6 | IOMUX_CONFIG_SION, 0x0874, 0, 0),
+ MX6_PAD_EIM_D16__TPSMP_HTRANS_0 = IOMUX_PAD(0x0514, 0x0144, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_D16__EPDC_SDDO_10 = IOMUX_PAD(0x0514, 0x0144, 8, 0x0000, 0, 0),
+ MX6_PAD_EIM_D17__WEIM_WEIM_D_17 = IOMUX_PAD(0x0518, 0x0148, 0, 0x0000, 0, 0),
MX6_PAD_EIM_D17__ECSPI1_MISO = IOMUX_PAD(0x0518, 0x0148, 1, 0x07DC, 2, 0),
+ MX6_PAD_EIM_D17__IPU1_DI0_PIN6 = IOMUX_PAD(0x0518, 0x0148, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_D17__IPU1_CSI1_PIXCLK = IOMUX_PAD(0x0518, 0x0148, 3, 0x08B8, 1, 0),
+ MX6_PAD_EIM_D17__DCIC1_DCIC_OUT = IOMUX_PAD(0x0518, 0x0148, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_D17__GPIO_3_17 = IOMUX_PAD(0x0518, 0x0148, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_D17__I2C3_SCL = IOMUX_PAD(0x0518, 0x0148, 6 | IOMUX_CONFIG_SION, 0x0878, 0, 0),
+ MX6_PAD_EIM_D17__PL301_SIM_MX6DL_PER1_HBURST_1 = IOMUX_PAD(0x0518, 0x0148, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_D17__EPDC_VCOM_0 = IOMUX_PAD(0x0518, 0x0148, 8, 0x0000, 0, 0),
+ MX6_PAD_EIM_D18__WEIM_WEIM_D_18 = IOMUX_PAD(0x051C, 0x014C, 0, 0x0000, 0, 0),
MX6_PAD_EIM_D18__ECSPI1_MOSI = IOMUX_PAD(0x051C, 0x014C, 1, 0x07E0, 2, 0),
+ MX6_PAD_EIM_D18__IPU1_DI0_PIN7 = IOMUX_PAD(0x051C, 0x014C, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_D18__IPU1_CSI1_D_17 = IOMUX_PAD(0x051C, 0x014C, 3, 0x08A4, 1, 0),
+ MX6_PAD_EIM_D18__IPU1_DI1_D0_CS = IOMUX_PAD(0x051C, 0x014C, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_D18__GPIO_3_18 = IOMUX_PAD(0x051C, 0x014C, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_D18__I2C3_SDA = IOMUX_PAD(0x051C, 0x014C, 6 | IOMUX_CONFIG_SION, 0x087C, 0, 0),
+ MX6_PAD_EIM_D18__PL301_SIM_MX6DL_PER1_HBURST_2 = IOMUX_PAD(0x051C, 0x014C, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_D18__EPDC_VCOM_1 = IOMUX_PAD(0x051C, 0x014C, 8, 0x0000, 0, 0),
+ MX6_PAD_EIM_D19__WEIM_WEIM_D_19 = IOMUX_PAD(0x0520, 0x0150, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_D19__ECSPI1_SS1 = IOMUX_PAD(0x0520, 0x0150, 1, 0x07E8, 1, 0),
+ MX6_PAD_EIM_D19__IPU1_DI0_PIN8 = IOMUX_PAD(0x0520, 0x0150, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_D19__IPU1_CSI1_D_16 = IOMUX_PAD(0x0520, 0x0150, 3, 0x08A0, 1, 0),
+ MX6_PAD_EIM_D19__UART1_CTS = IOMUX_PAD(0x0520, 0x0150, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_D19__UART1_RTS = IOMUX_PAD(0x0520, 0x0150, 4, 0x08F8, 0, 0),
MX6_PAD_EIM_D19__GPIO_3_19 = IOMUX_PAD(0x0520, 0x0150, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_D19__EPIT1_EPITO = IOMUX_PAD(0x0520, 0x0150, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_D19__PL301_SIM_MX6DL_PER1_HRESP = IOMUX_PAD(0x0520, 0x0150, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_D19__EPDC_SDDO_12 = IOMUX_PAD(0x0520, 0x0150, 8, 0x0000, 0, 0),
+ MX6_PAD_EIM_D20__WEIM_WEIM_D_20 = IOMUX_PAD(0x0524, 0x0154, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_D20__ECSPI4_SS0 = IOMUX_PAD(0x0524, 0x0154, 1, 0x0808, 0, 0),
+ MX6_PAD_EIM_D20__IPU1_DI0_PIN16 = IOMUX_PAD(0x0524, 0x0154, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_D20__IPU1_CSI1_D_15 = IOMUX_PAD(0x0524, 0x0154, 3, 0x089C, 1, 0),
+ MX6_PAD_EIM_D20__UART1_CTS = IOMUX_PAD(0x0524, 0x0154, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_D20__UART1_RTS = IOMUX_PAD(0x0524, 0x0154, 4, 0x08F8, 1, 0),
+ MX6_PAD_EIM_D20__GPIO_3_20 = IOMUX_PAD(0x0524, 0x0154, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_D20__EPIT2_EPITO = IOMUX_PAD(0x0524, 0x0154, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_D20__TPSMP_HTRANS_1 = IOMUX_PAD(0x0524, 0x0154, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_D21__WEIM_WEIM_D_21 = IOMUX_PAD(0x0528, 0x0158, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_D21__ECSPI4_SCLK = IOMUX_PAD(0x0528, 0x0158, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_D21__IPU1_DI0_PIN17 = IOMUX_PAD(0x0528, 0x0158, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_D21__IPU1_CSI1_D_11 = IOMUX_PAD(0x0528, 0x0158, 3, 0x088C, 0, 0),
+ MX6_PAD_EIM_D21__USBOH3_USBOTG_OC = IOMUX_PAD(0x0528, 0x0158, 4, 0x0920, 0, 0),
MX6_PAD_EIM_D21__GPIO_3_21 = IOMUX_PAD(0x0528, 0x0158, 5, 0x0000, 0, 0),
MX6_PAD_EIM_D21__I2C1_SCL = IOMUX_PAD(0x0528, 0x0158, 6 | IOMUX_CONFIG_SION, 0x0868, 1, 0),
+ MX6_PAD_EIM_D21__SPDIF_IN1 = IOMUX_PAD(0x0528, 0x0158, 7, 0x08F0, 0, 0),
+ MX6_PAD_EIM_D22__WEIM_WEIM_D_22 = IOMUX_PAD(0x052C, 0x015C, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_D22__ECSPI4_MISO = IOMUX_PAD(0x052C, 0x015C, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_D22__IPU1_DI0_PIN1 = IOMUX_PAD(0x052C, 0x015C, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_D22__IPU1_CSI1_D_10 = IOMUX_PAD(0x052C, 0x015C, 3, 0x0888, 0, 0),
+ MX6_PAD_EIM_D22__USBOH3_USBOTG_PWR = IOMUX_PAD(0x052C, 0x015C, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_D22__GPIO_3_22 = IOMUX_PAD(0x052C, 0x015C, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_D22__SPDIF_OUT1 = IOMUX_PAD(0x052C, 0x015C, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_D22__PL301_SIM_MX6DL_PER1_HWRITE = IOMUX_PAD(0x052C, 0x015C, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_D22__EPDC_SDCE_6 = IOMUX_PAD(0x052C, 0x015C, 8, 0x0000, 0, 0),
+ MX6_PAD_EIM_D23__WEIM_WEIM_D_23 = IOMUX_PAD(0x0530, 0x0160, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_D23__IPU1_DI0_D0_CS = IOMUX_PAD(0x0530, 0x0160, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_D23__UART3_CTS = IOMUX_PAD(0x0530, 0x0160, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_D23__UART3_RTS = IOMUX_PAD(0x0530, 0x0160, 2, 0x0908, 0, 0),
+ MX6_PAD_EIM_D23__UART1_DCD = IOMUX_PAD(0x0530, 0x0160, 3, 0x0000, 0, 0),
+ MX6_PAD_EIM_D23__IPU1_CSI1_DATA_EN = IOMUX_PAD(0x0530, 0x0160, 4, 0x08B0, 0, 0),
MX6_PAD_EIM_D23__GPIO_3_23 = IOMUX_PAD(0x0530, 0x0160, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_D23__IPU1_DI1_PIN2 = IOMUX_PAD(0x0530, 0x0160, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_D23__IPU1_DI1_PIN14 = IOMUX_PAD(0x0530, 0x0160, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_D23__EPDC_SDDO_11 = IOMUX_PAD(0x0530, 0x0160, 8, 0x0000, 0, 0),
+ MX6_PAD_EIM_D24__WEIM_WEIM_D_24 = IOMUX_PAD(0x0534, 0x0164, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_D24__ECSPI4_SS2 = IOMUX_PAD(0x0534, 0x0164, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_D24__UART3_TXD = IOMUX_PAD(0x0534, 0x0164, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_D24__UART3_RXD = IOMUX_PAD(0x0534, 0x0164, 2, 0x090C, 0, 0),
+ MX6_PAD_EIM_D24__ECSPI1_SS2 = IOMUX_PAD(0x0534, 0x0164, 3, 0x07EC, 0, 0),
+ MX6_PAD_EIM_D24__ECSPI2_SS2 = IOMUX_PAD(0x0534, 0x0164, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_D24__GPIO_3_24 = IOMUX_PAD(0x0534, 0x0164, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_D24__AUDMUX_AUD5_RXFS = IOMUX_PAD(0x0534, 0x0164, 6, 0x07BC, 1, 0),
+ MX6_PAD_EIM_D24__UART1_DTR = IOMUX_PAD(0x0534, 0x0164, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_D24__EPDC_SDCE_7 = IOMUX_PAD(0x0534, 0x0164, 8, 0x0000, 0, 0),
+ MX6_PAD_EIM_D25__WEIM_WEIM_D_25 = IOMUX_PAD(0x0538, 0x0168, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_D25__ECSPI4_SS3 = IOMUX_PAD(0x0538, 0x0168, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_D25__UART3_TXD = IOMUX_PAD(0x0538, 0x0168, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_D25__UART3_RXD = IOMUX_PAD(0x0538, 0x0168, 2, 0x090C, 1, 0),
+ MX6_PAD_EIM_D25__ECSPI1_SS3 = IOMUX_PAD(0x0538, 0x0168, 3, 0x07F0, 0, 0),
+ MX6_PAD_EIM_D25__ECSPI2_SS3 = IOMUX_PAD(0x0538, 0x0168, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_D25__GPIO_3_25 = IOMUX_PAD(0x0538, 0x0168, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_D25__AUDMUX_AUD5_RXC = IOMUX_PAD(0x0538, 0x0168, 6, 0x07B8, 1, 0),
+ MX6_PAD_EIM_D25__UART1_DSR = IOMUX_PAD(0x0538, 0x0168, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_D25__EPDC_SDCE_8 = IOMUX_PAD(0x0538, 0x0168, 8, 0x0000, 0, 0),
+ MX6_PAD_EIM_D26__WEIM_WEIM_D_26 = IOMUX_PAD(0x053C, 0x016C, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_D26__IPU1_DI1_PIN11 = IOMUX_PAD(0x053C, 0x016C, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_D26__IPU1_CSI0_D_1 = IOMUX_PAD(0x053C, 0x016C, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_D26__IPU1_CSI1_D_14 = IOMUX_PAD(0x053C, 0x016C, 3, 0x0898, 1, 0),
MX6_PAD_EIM_D26__UART2_TXD = IOMUX_PAD(0x053C, 0x016C, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_D26__UART2_RXD = IOMUX_PAD(0x053C, 0x016C, 4, 0x0904, 0, 0),
+ MX6_PAD_EIM_D26__GPIO_3_26 = IOMUX_PAD(0x053C, 0x016C, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_D26__IPU1_SISG_2 = IOMUX_PAD(0x053C, 0x016C, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_D26__IPU1_DISP1_DAT_22 = IOMUX_PAD(0x053C, 0x016C, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_D26__EPDC_SDOED = IOMUX_PAD(0x053C, 0x016C, 8, 0x0000, 0, 0),
+ MX6_PAD_EIM_D27__WEIM_WEIM_D_27 = IOMUX_PAD(0x0540, 0x0170, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_D27__IPU1_DI1_PIN13 = IOMUX_PAD(0x0540, 0x0170, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_D27__IPU1_CSI0_D_0 = IOMUX_PAD(0x0540, 0x0170, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_D27__IPU1_CSI1_D_13 = IOMUX_PAD(0x0540, 0x0170, 3, 0x0894, 1, 0),
+ MX6_PAD_EIM_D27__UART2_TXD = IOMUX_PAD(0x0540, 0x0170, 4, 0x0000, 0, 0),
MX6_PAD_EIM_D27__UART2_RXD = IOMUX_PAD(0x0540, 0x0170, 4, 0x0904, 1, 0),
+ MX6_PAD_EIM_D27__GPIO_3_27 = IOMUX_PAD(0x0540, 0x0170, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_D27__IPU1_SISG_3 = IOMUX_PAD(0x0540, 0x0170, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_D27__IPU1_DISP1_DAT_23 = IOMUX_PAD(0x0540, 0x0170, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_D27__EPDC_SDOE = IOMUX_PAD(0x0540, 0x0170, 8, 0x0000, 0, 0),
+ MX6_PAD_EIM_D28__WEIM_WEIM_D_28 = IOMUX_PAD(0x0544, 0x0174, 0, 0x0000, 0, 0),
MX6_PAD_EIM_D28__I2C1_SDA = IOMUX_PAD(0x0544, 0x0174, 1 | IOMUX_CONFIG_SION, 0x086C, 1, 0),
+ MX6_PAD_EIM_D28__ECSPI4_MOSI = IOMUX_PAD(0x0544, 0x0174, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_D28__IPU1_CSI1_D_12 = IOMUX_PAD(0x0544, 0x0174, 3, 0x0890, 1, 0),
+ MX6_PAD_EIM_D28__UART2_CTS = IOMUX_PAD(0x0544, 0x0174, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_D28__UART2_RTS = IOMUX_PAD(0x0544, 0x0174, 4, 0x0900, 0, 0),
MX6_PAD_EIM_D28__GPIO_3_28 = IOMUX_PAD(0x0544, 0x0174, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_D28__IPU1_EXT_TRIG = IOMUX_PAD(0x0544, 0x0174, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_D28__IPU1_DI0_PIN13 = IOMUX_PAD(0x0544, 0x0174, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_D28__EPDC_PWRCTRL_3 = IOMUX_PAD(0x0544, 0x0174, 8, 0x0000, 0, 0),
+ MX6_PAD_EIM_D29__WEIM_WEIM_D_29 = IOMUX_PAD(0x0548, 0x0178, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_D29__IPU1_DI1_PIN15 = IOMUX_PAD(0x0548, 0x0178, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_D29__ECSPI4_SS0 = IOMUX_PAD(0x0548, 0x0178, 2, 0x0808, 1, 0),
+ MX6_PAD_EIM_D29__UART2_CTS = IOMUX_PAD(0x0548, 0x0178, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_D29__UART2_RTS = IOMUX_PAD(0x0548, 0x0178, 4, 0x0900, 1, 0),
MX6_PAD_EIM_D29__GPIO_3_29 = IOMUX_PAD(0x0548, 0x0178, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_D29__IPU1_CSI1_VSYNC = IOMUX_PAD(0x0548, 0x0178, 6, 0x08BC, 0, 0),
+ MX6_PAD_EIM_D29__IPU1_DI0_PIN14 = IOMUX_PAD(0x0548, 0x0178, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_D29__EPDC_PWRWAKE = IOMUX_PAD(0x0548, 0x0178, 8, 0x0000, 0, 0),
+ MX6_PAD_EIM_D30__WEIM_WEIM_D_30 = IOMUX_PAD(0x054C, 0x017C, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_D30__IPU1_DISP1_DAT_21 = IOMUX_PAD(0x054C, 0x017C, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_D30__IPU1_DI0_PIN11 = IOMUX_PAD(0x054C, 0x017C, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_D30__IPU1_CSI0_D_3 = IOMUX_PAD(0x054C, 0x017C, 3, 0x0000, 0, 0),
+ MX6_PAD_EIM_D30__UART3_CTS = IOMUX_PAD(0x054C, 0x017C, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_D30__UART3_RTS = IOMUX_PAD(0x054C, 0x017C, 4, 0x0908, 1, 0),
+ MX6_PAD_EIM_D30__GPIO_3_30 = IOMUX_PAD(0x054C, 0x017C, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_D30__USBOH3_USBH1_OC = IOMUX_PAD(0x054C, 0x017C, 6, 0x0924, 0, 0),
+ MX6_PAD_EIM_D30__PL301_SIM_MX6DL_PER1_HPROT_0 = IOMUX_PAD(0x054C, 0x017C, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_D30__EPDC_SDOEZ = IOMUX_PAD(0x054C, 0x017C, 8, 0x0000, 0, 0),
+ MX6_PAD_EIM_D31__WEIM_WEIM_D_31 = IOMUX_PAD(0x0550, 0x0180, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_D31__IPU1_DISP1_DAT_20 = IOMUX_PAD(0x0550, 0x0180, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_D31__IPU1_DI0_PIN12 = IOMUX_PAD(0x0550, 0x0180, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_D31__IPU1_CSI0_D_2 = IOMUX_PAD(0x0550, 0x0180, 3, 0x0000, 0, 0),
+ MX6_PAD_EIM_D31__UART3_CTS = IOMUX_PAD(0x0550, 0x0180, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_D31__UART3_RTS = IOMUX_PAD(0x0550, 0x0180, 4, 0x0908, 2, 0),
+ MX6_PAD_EIM_D31__GPIO_3_31 = IOMUX_PAD(0x0550, 0x0180, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_D31__USBOH3_USBH1_PWR = IOMUX_PAD(0x0550, 0x0180, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_D31__PL301_SIM_MX6DL_PER1_HPROT_1 = IOMUX_PAD(0x0550, 0x0180, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_D31__EPDC_SDCLK = IOMUX_PAD(0x0550, 0x0180, 8, 0x0000, 0, 0),
+ MX6_PAD_EIM_D31__WEIM_ACLK_FREERUN = IOMUX_PAD(0x0550, 0x0180, 9, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA0__WEIM_WEIM_DA_A_0 = IOMUX_PAD(0x0554, 0x0184, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA0__IPU1_DISP1_DAT_9 = IOMUX_PAD(0x0554, 0x0184, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA0__IPU1_CSI1_D_9 = IOMUX_PAD(0x0554, 0x0184, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA0__MIPI_CORE_DPHY_TEST_OUT_2 = IOMUX_PAD(0x0554, 0x0184, 3, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA0__GPIO_3_0 = IOMUX_PAD(0x0554, 0x0184, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA0__TPSMP_HDATA_14 = IOMUX_PAD(0x0554, 0x0184, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA0__SRC_BT_CFG_0 = IOMUX_PAD(0x0554, 0x0184, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA0__EPDC_SDCLKN = IOMUX_PAD(0x0554, 0x0184, 8, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA1__WEIM_WEIM_DA_A_1 = IOMUX_PAD(0x0558, 0x0188, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA1__IPU1_DISP1_DAT_8 = IOMUX_PAD(0x0558, 0x0188, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA1__IPU1_CSI1_D_8 = IOMUX_PAD(0x0558, 0x0188, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA1__MIPI_CORE_DPHY_TEST_OUT_3 = IOMUX_PAD(0x0558, 0x0188, 3, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA1__ANATOP_USBPHY1_TSTI_TX_LS_MODE = IOMUX_PAD(0x0558, 0x0188, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA1__GPIO_3_1 = IOMUX_PAD(0x0558, 0x0188, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA1__TPSMP_HDATA_15 = IOMUX_PAD(0x0558, 0x0188, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA1__SRC_BT_CFG_1 = IOMUX_PAD(0x0558, 0x0188, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA1__EPDC_SDLE = IOMUX_PAD(0x0558, 0x0188, 8, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA10__WEIM_WEIM_DA_A_10 = IOMUX_PAD(0x055C, 0x018C, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA10__IPU1_DI1_PIN15 = IOMUX_PAD(0x055C, 0x018C, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA10__IPU1_CSI1_DATA_EN = IOMUX_PAD(0x055C, 0x018C, 2, 0x08B0, 1, 0),
+ MX6_PAD_EIM_DA10__MIPI_CORE_DPHY_TEST_OUT_12 = IOMUX_PAD(0x055C, 0x018C, 3, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA10__GPIO_3_10 = IOMUX_PAD(0x055C, 0x018C, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA10__TPSMP_HDATA_24 = IOMUX_PAD(0x055C, 0x018C, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA10__SRC_BT_CFG_10 = IOMUX_PAD(0x055C, 0x018C, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA10__EPDC_SDDO_1 = IOMUX_PAD(0x055C, 0x018C, 8, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA11__WEIM_WEIM_DA_A_11 = IOMUX_PAD(0x0560, 0x0190, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA11__IPU1_DI1_PIN2 = IOMUX_PAD(0x0560, 0x0190, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA11__IPU1_CSI1_HSYNC = IOMUX_PAD(0x0560, 0x0190, 2, 0x08B4, 0, 0),
+ MX6_PAD_EIM_DA11__MIPI_CORE_DPHY_TEST_OUT_13 = IOMUX_PAD(0x0560, 0x0190, 3, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA11__SDMA_DEBUG_EVT_CHN_LINES_6 = IOMUX_PAD(0x0560, 0x0190, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA11__GPIO_3_11 = IOMUX_PAD(0x0560, 0x0190, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA11__TPSMP_HDATA_25 = IOMUX_PAD(0x0560, 0x0190, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA11__SRC_BT_CFG_11 = IOMUX_PAD(0x0560, 0x0190, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA11__EPDC_SDDO_3 = IOMUX_PAD(0x0560, 0x0190, 8, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA12__WEIM_WEIM_DA_A_12 = IOMUX_PAD(0x0564, 0x0194, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA12__IPU1_DI1_PIN3 = IOMUX_PAD(0x0564, 0x0194, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA12__IPU1_CSI1_VSYNC = IOMUX_PAD(0x0564, 0x0194, 2, 0x08BC, 1, 0),
+ MX6_PAD_EIM_DA12__MIPI_CORE_DPHY_TEST_OUT_14 = IOMUX_PAD(0x0564, 0x0194, 3, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA12__SDMA_DEBUG_EVT_CHN_LINES_3 = IOMUX_PAD(0x0564, 0x0194, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA12__GPIO_3_12 = IOMUX_PAD(0x0564, 0x0194, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA12__TPSMP_HDATA_26 = IOMUX_PAD(0x0564, 0x0194, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA12__SRC_BT_CFG_12 = IOMUX_PAD(0x0564, 0x0194, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA12__EPDC_SDDO_2 = IOMUX_PAD(0x0564, 0x0194, 8, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA13__WEIM_WEIM_DA_A_13 = IOMUX_PAD(0x0568, 0x0198, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA13__IPU1_DI1_D0_CS = IOMUX_PAD(0x0568, 0x0198, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA13__CCM_DI1_EXT_CLK = IOMUX_PAD(0x0568, 0x0198, 2, 0x07D0, 0, 0),
+ MX6_PAD_EIM_DA13__MIPI_CORE_DPHY_TEST_OUT_15 = IOMUX_PAD(0x0568, 0x0198, 3, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA13__SDMA_DEBUG_EVT_CHN_LINES_4 = IOMUX_PAD(0x0568, 0x0198, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA13__GPIO_3_13 = IOMUX_PAD(0x0568, 0x0198, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA13__TPSMP_HDATA_27 = IOMUX_PAD(0x0568, 0x0198, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA13__SRC_BT_CFG_13 = IOMUX_PAD(0x0568, 0x0198, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA13__EPDC_SDDO_13 = IOMUX_PAD(0x0568, 0x0198, 8, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA14__WEIM_WEIM_DA_A_14 = IOMUX_PAD(0x056C, 0x019C, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA14__IPU1_DI1_D1_CS = IOMUX_PAD(0x056C, 0x019C, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA14__CCM_DI0_EXT_CLK = IOMUX_PAD(0x056C, 0x019C, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA14__MIPI_CORE_DPHY_TEST_OUT_16 = IOMUX_PAD(0x056C, 0x019C, 3, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA14__SDMA_DEBUG_EVT_CHN_LINES_5 = IOMUX_PAD(0x056C, 0x019C, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA14__GPIO_3_14 = IOMUX_PAD(0x056C, 0x019C, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA14__TPSMP_HDATA_28 = IOMUX_PAD(0x056C, 0x019C, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA14__SRC_BT_CFG_14 = IOMUX_PAD(0x056C, 0x019C, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA14__EPDC_SDDO_14 = IOMUX_PAD(0x056C, 0x019C, 8, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA15__WEIM_WEIM_DA_A_15 = IOMUX_PAD(0x0570, 0x01A0, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA15__IPU1_DI1_PIN1 = IOMUX_PAD(0x0570, 0x01A0, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA15__IPU1_DI1_PIN4 = IOMUX_PAD(0x0570, 0x01A0, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA15__MIPI_CORE_DPHY_TEST_OUT_17 = IOMUX_PAD(0x0570, 0x01A0, 3, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA15__GPIO_3_15 = IOMUX_PAD(0x0570, 0x01A0, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA15__TPSMP_HDATA_29 = IOMUX_PAD(0x0570, 0x01A0, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA15__SRC_BT_CFG_15 = IOMUX_PAD(0x0570, 0x01A0, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA15__EPDC_SDDO_9 = IOMUX_PAD(0x0570, 0x01A0, 8, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA2__WEIM_WEIM_DA_A_2 = IOMUX_PAD(0x0574, 0x01A4, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA2__IPU1_DISP1_DAT_7 = IOMUX_PAD(0x0574, 0x01A4, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA2__IPU1_CSI1_D_7 = IOMUX_PAD(0x0574, 0x01A4, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA2__MIPI_CORE_DPHY_TEST_OUT_4 = IOMUX_PAD(0x0574, 0x01A4, 3, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA2__ANATOP_USBPHY1_TSTI_TX_HS_MODE = IOMUX_PAD(0x0574, 0x01A4, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA2__GPIO_3_2 = IOMUX_PAD(0x0574, 0x01A4, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA2__TPSMP_HDATA_16 = IOMUX_PAD(0x0574, 0x01A4, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA2__SRC_BT_CFG_2 = IOMUX_PAD(0x0574, 0x01A4, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA2__EPDC_BDR_0 = IOMUX_PAD(0x0574, 0x01A4, 8, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA3__WEIM_WEIM_DA_A_3 = IOMUX_PAD(0x0578, 0x01A8, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA3__IPU1_DISP1_DAT_6 = IOMUX_PAD(0x0578, 0x01A8, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA3__IPU1_CSI1_D_6 = IOMUX_PAD(0x0578, 0x01A8, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA3__MIPI_CORE_DPHY_TEST_OUT_5 = IOMUX_PAD(0x0578, 0x01A8, 3, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA3__ANATOP_USBPHY1_TSTI_TX_HIZ = IOMUX_PAD(0x0578, 0x01A8, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA3__GPIO_3_3 = IOMUX_PAD(0x0578, 0x01A8, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA3__TPSMP_HDATA_17 = IOMUX_PAD(0x0578, 0x01A8, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA3__SRC_BT_CFG_3 = IOMUX_PAD(0x0578, 0x01A8, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA3__EPDC_BDR_1 = IOMUX_PAD(0x0578, 0x01A8, 8, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA4__WEIM_WEIM_DA_A_4 = IOMUX_PAD(0x057C, 0x01AC, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA4__IPU1_DISP1_DAT_5 = IOMUX_PAD(0x057C, 0x01AC, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA4__IPU1_CSI1_D_5 = IOMUX_PAD(0x057C, 0x01AC, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA4__MIPI_CORE_DPHY_TEST_OUT_6 = IOMUX_PAD(0x057C, 0x01AC, 3, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA4__ANATOP_USBPHY1_TSTI_TX_EN = IOMUX_PAD(0x057C, 0x01AC, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA4__GPIO_3_4 = IOMUX_PAD(0x057C, 0x01AC, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA4__TPSMP_HDATA_18 = IOMUX_PAD(0x057C, 0x01AC, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA4__SRC_BT_CFG_4 = IOMUX_PAD(0x057C, 0x01AC, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA4__EPDC_SDCE_0 = IOMUX_PAD(0x057C, 0x01AC, 8, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA5__WEIM_WEIM_DA_A_5 = IOMUX_PAD(0x0580, 0x01B0, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA5__IPU1_DISP1_DAT_4 = IOMUX_PAD(0x0580, 0x01B0, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA5__IPU1_CSI1_D_4 = IOMUX_PAD(0x0580, 0x01B0, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA5__MIPI_CORE_DPHY_TEST_OUT_7 = IOMUX_PAD(0x0580, 0x01B0, 3, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA5__ANATOP_USBPHY1_TSTI_TX_DP = IOMUX_PAD(0x0580, 0x01B0, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA5__GPIO_3_5 = IOMUX_PAD(0x0580, 0x01B0, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA5__TPSMP_HDATA_19 = IOMUX_PAD(0x0580, 0x01B0, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA5__SRC_BT_CFG_5 = IOMUX_PAD(0x0580, 0x01B0, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA5__EPDC_SDCE_1 = IOMUX_PAD(0x0580, 0x01B0, 8, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA6__WEIM_WEIM_DA_A_6 = IOMUX_PAD(0x0584, 0x01B4, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA6__IPU1_DISP1_DAT_3 = IOMUX_PAD(0x0584, 0x01B4, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA6__IPU1_CSI1_D_3 = IOMUX_PAD(0x0584, 0x01B4, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA6__MIPI_CORE_DPHY_TEST_OUT_8 = IOMUX_PAD(0x0584, 0x01B4, 3, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA6__ANATOP_USBPHY1_TSTI_TX_DN = IOMUX_PAD(0x0584, 0x01B4, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA6__GPIO_3_6 = IOMUX_PAD(0x0584, 0x01B4, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA6__TPSMP_HDATA_20 = IOMUX_PAD(0x0584, 0x01B4, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA6__SRC_BT_CFG_6 = IOMUX_PAD(0x0584, 0x01B4, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA6__EPDC_SDCE_2 = IOMUX_PAD(0x0584, 0x01B4, 8, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA7__WEIM_WEIM_DA_A_7 = IOMUX_PAD(0x0588, 0x01B8, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA7__IPU1_DISP1_DAT_2 = IOMUX_PAD(0x0588, 0x01B8, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA7__IPU1_CSI1_D_2 = IOMUX_PAD(0x0588, 0x01B8, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA7__MIPI_CORE_DPHY_TEST_OUT_9 = IOMUX_PAD(0x0588, 0x01B8, 3, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA7__GPIO_3_7 = IOMUX_PAD(0x0588, 0x01B8, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA7__TPSMP_HDATA_21 = IOMUX_PAD(0x0588, 0x01B8, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA7__SRC_BT_CFG_7 = IOMUX_PAD(0x0588, 0x01B8, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA7__EPDC_SDCE_3 = IOMUX_PAD(0x0588, 0x01B8, 8, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA8__WEIM_WEIM_DA_A_8 = IOMUX_PAD(0x058C, 0x01BC, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA8__IPU1_DISP1_DAT_1 = IOMUX_PAD(0x058C, 0x01BC, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA8__IPU1_CSI1_D_1 = IOMUX_PAD(0x058C, 0x01BC, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA8__MIPI_CORE_DPHY_TEST_OUT_10 = IOMUX_PAD(0x058C, 0x01BC, 3, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA8__GPIO_3_8 = IOMUX_PAD(0x058C, 0x01BC, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA8__TPSMP_HDATA_22 = IOMUX_PAD(0x058C, 0x01BC, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA8__SRC_BT_CFG_8 = IOMUX_PAD(0x058C, 0x01BC, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA8__EPDC_SDCE_4 = IOMUX_PAD(0x058C, 0x01BC, 8, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA9__WEIM_WEIM_DA_A_9 = IOMUX_PAD(0x0590, 0x01C0, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA9__IPU1_DISP1_DAT_0 = IOMUX_PAD(0x0590, 0x01C0, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA9__IPU1_CSI1_D_0 = IOMUX_PAD(0x0590, 0x01C0, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA9__MIPI_CORE_DPHY_TEST_OUT_11 = IOMUX_PAD(0x0590, 0x01C0, 3, 0x0000, 0, 0),
MX6_PAD_EIM_DA9__GPIO_3_9 = IOMUX_PAD(0x0590, 0x01C0, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA9__TPSMP_HDATA_23 = IOMUX_PAD(0x0590, 0x01C0, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA9__SRC_BT_CFG_9 = IOMUX_PAD(0x0590, 0x01C0, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_DA9__EPDC_SDCE_5 = IOMUX_PAD(0x0590, 0x01C0, 8, 0x0000, 0, 0),
+ MX6_PAD_EIM_EB0__WEIM_WEIM_EB_0 = IOMUX_PAD(0x0594, 0x01C4, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_EB0__IPU1_DISP1_DAT_11 = IOMUX_PAD(0x0594, 0x01C4, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_EB0__IPU1_CSI1_D_11 = IOMUX_PAD(0x0594, 0x01C4, 2, 0x088C, 1, 0),
+ MX6_PAD_EIM_EB0__MIPI_CORE_DPHY_TEST_OUT_0 = IOMUX_PAD(0x0594, 0x01C4, 3, 0x0000, 0, 0),
+ MX6_PAD_EIM_EB0__CCM_PMIC_RDY = IOMUX_PAD(0x0594, 0x01C4, 4, 0x07D4, 0, 0),
+ MX6_PAD_EIM_EB0__GPIO_2_28 = IOMUX_PAD(0x0594, 0x01C4, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_EB0__TPSMP_HDATA_12 = IOMUX_PAD(0x0594, 0x01C4, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_EB0__SRC_BT_CFG_27 = IOMUX_PAD(0x0594, 0x01C4, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_EB0__EPDC_PWRCOM = IOMUX_PAD(0x0594, 0x01C4, 8, 0x0000, 0, 0),
+ MX6_PAD_EIM_EB1__WEIM_WEIM_EB_1 = IOMUX_PAD(0x0598, 0x01C8, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_EB1__IPU1_DISP1_DAT_10 = IOMUX_PAD(0x0598, 0x01C8, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_EB1__IPU1_CSI1_D_10 = IOMUX_PAD(0x0598, 0x01C8, 2, 0x0888, 1, 0),
+ MX6_PAD_EIM_EB1__MIPI_CORE_DPHY_TEST_OUT_1 = IOMUX_PAD(0x0598, 0x01C8, 3, 0x0000, 0, 0),
+ MX6_PAD_EIM_EB1__GPIO_2_29 = IOMUX_PAD(0x0598, 0x01C8, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_EB1__TPSMP_HDATA_13 = IOMUX_PAD(0x0598, 0x01C8, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_EB1__SRC_BT_CFG_28 = IOMUX_PAD(0x0598, 0x01C8, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_EB1__EPDC_SDSHR = IOMUX_PAD(0x0598, 0x01C8, 8, 0x0000, 0, 0),
+ MX6_PAD_EIM_EB2__WEIM_WEIM_EB_2 = IOMUX_PAD(0x059C, 0x01CC, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_EB2__ECSPI1_SS0 = IOMUX_PAD(0x059C, 0x01CC, 1, 0x07E4, 2, 0),
+ MX6_PAD_EIM_EB2__CCM_DI1_EXT_CLK = IOMUX_PAD(0x059C, 0x01CC, 2, 0x07D0, 1, 0),
+ MX6_PAD_EIM_EB2__IPU1_CSI1_D_19 = IOMUX_PAD(0x059C, 0x01CC, 3, 0x08AC, 1, 0),
+ MX6_PAD_EIM_EB2__HDMI_TX_DDC_SCL = IOMUX_PAD(0x059C, 0x01CC, 4, 0x0860, 0, 0),
+ MX6_PAD_EIM_EB2__GPIO_2_30 = IOMUX_PAD(0x059C, 0x01CC, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_EB2__I2C2_SCL = IOMUX_PAD(0x059C, 0x01CC, 6 | IOMUX_CONFIG_SION, 0x0870, 0, 0),
+ MX6_PAD_EIM_EB2__SRC_BT_CFG_30 = IOMUX_PAD(0x059C, 0x01CC, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_EB2__EPDC_SDDO_5 = IOMUX_PAD(0x059C, 0x01CC, 8, 0x0000, 0, 0),
+ MX6_PAD_EIM_EB3__WEIM_WEIM_EB_3 = IOMUX_PAD(0x05A0, 0x01D0, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_EB3__ECSPI4_RDY = IOMUX_PAD(0x05A0, 0x01D0, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_EB3__UART3_CTS = IOMUX_PAD(0x05A0, 0x01D0, 2, 0x0000, 0, 0),
+ MX6_PAD_EIM_EB3__UART3_RTS = IOMUX_PAD(0x05A0, 0x01D0, 2, 0x0908, 3, 0),
+ MX6_PAD_EIM_EB3__UART1_RI = IOMUX_PAD(0x05A0, 0x01D0, 3, 0x0000, 0, 0),
+ MX6_PAD_EIM_EB3__IPU1_CSI1_HSYNC = IOMUX_PAD(0x05A0, 0x01D0, 4, 0x08B4, 1, 0),
+ MX6_PAD_EIM_EB3__GPIO_2_31 = IOMUX_PAD(0x05A0, 0x01D0, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_EB3__IPU1_DI1_PIN3 = IOMUX_PAD(0x05A0, 0x01D0, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_EB3__SRC_BT_CFG_31 = IOMUX_PAD(0x05A0, 0x01D0, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_EB3__EPDC_SDCE_0 = IOMUX_PAD(0x05A0, 0x01D0, 8, 0x0000, 0, 0),
+ MX6_PAD_EIM_EB3__WEIM_ACLK_FREERUN = IOMUX_PAD(0x05A0, 0x01D0, 9, 0x0000, 0, 0),
+ MX6_PAD_EIM_LBA__WEIM_WEIM_LBA = IOMUX_PAD(0x05A4, 0x01D4, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_LBA__IPU1_DI1_PIN17 = IOMUX_PAD(0x05A4, 0x01D4, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_LBA__ECSPI2_SS1 = IOMUX_PAD(0x05A4, 0x01D4, 2, 0x0804, 1, 0),
+ MX6_PAD_EIM_LBA__GPIO_2_27 = IOMUX_PAD(0x05A4, 0x01D4, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_LBA__TPSMP_HDATA_11 = IOMUX_PAD(0x05A4, 0x01D4, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_LBA__SRC_BT_CFG_26 = IOMUX_PAD(0x05A4, 0x01D4, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_LBA__EPDC_SDDO_4 = IOMUX_PAD(0x05A4, 0x01D4, 8, 0x0000, 0, 0),
+ MX6_PAD_EIM_OE__WEIM_WEIM_OE = IOMUX_PAD(0x05A8, 0x01D8, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_OE__IPU1_DI1_PIN7 = IOMUX_PAD(0x05A8, 0x01D8, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_OE__ECSPI2_MISO = IOMUX_PAD(0x05A8, 0x01D8, 2, 0x07F8, 2, 0),
+ MX6_PAD_EIM_OE__MIPI_CORE_DPHY_TEST_OUT_26 = IOMUX_PAD(0x05A8, 0x01D8, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_OE__GPIO_2_25 = IOMUX_PAD(0x05A8, 0x01D8, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_OE__TPSMP_HDATA_9 = IOMUX_PAD(0x05A8, 0x01D8, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_OE__EPDC_PWRIRQ = IOMUX_PAD(0x05A8, 0x01D8, 8, 0x0000, 0, 0),
+ MX6_PAD_EIM_RW__WEIM_WEIM_RW = IOMUX_PAD(0x05AC, 0x01DC, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_RW__IPU1_DI1_PIN8 = IOMUX_PAD(0x05AC, 0x01DC, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_RW__ECSPI2_SS0 = IOMUX_PAD(0x05AC, 0x01DC, 2, 0x0800, 2, 0),
+ MX6_PAD_EIM_RW__MIPI_CORE_DPHY_TEST_OUT_27 = IOMUX_PAD(0x05AC, 0x01DC, 4, 0x0000, 0, 0),
+ MX6_PAD_EIM_RW__GPIO_2_26 = IOMUX_PAD(0x05AC, 0x01DC, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_RW__TPSMP_HDATA_10 = IOMUX_PAD(0x05AC, 0x01DC, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_RW__SRC_BT_CFG_29 = IOMUX_PAD(0x05AC, 0x01DC, 7, 0x0000, 0, 0),
+ MX6_PAD_EIM_RW__EPDC_SDDO_7 = IOMUX_PAD(0x05AC, 0x01DC, 8, 0x0000, 0, 0),
+ MX6_PAD_EIM_WAIT__WEIM_WEIM_WAIT = IOMUX_PAD(0x05B0, 0x01E0, 0, 0x0000, 0, 0),
+ MX6_PAD_EIM_WAIT__WEIM_WEIM_DTACK_B = IOMUX_PAD(0x05B0, 0x01E0, 1, 0x0000, 0, 0),
+ MX6_PAD_EIM_WAIT__GPIO_5_0 = IOMUX_PAD(0x05B0, 0x01E0, 5, 0x0000, 0, 0),
+ MX6_PAD_EIM_WAIT__TPSMP_HDATA_30 = IOMUX_PAD(0x05B0, 0x01E0, 6, 0x0000, 0, 0),
+ MX6_PAD_EIM_WAIT__SRC_BT_CFG_25 = IOMUX_PAD(0x05B0, 0x01E0, 7, 0x0000, 0, 0),
+ MX6_PAD_ENET_CRS_DV__ENET_RX_EN = IOMUX_PAD(0x05B4, 0x01E4, 1, 0x0828, 0, 0),
+ MX6_PAD_ENET_CRS_DV__ESAI1_SCKT = IOMUX_PAD(0x05B4, 0x01E4, 2, 0x0840, 0, 0),
+ MX6_PAD_ENET_CRS_DV__SPDIF_SPDIF_EXTCLK = IOMUX_PAD(0x05B4, 0x01E4, 3, 0x08F4, 0, 0),
+ MX6_PAD_ENET_CRS_DV__GPIO_1_25 = IOMUX_PAD(0x05B4, 0x01E4, 5, 0x0000, 0, 0),
+ MX6_PAD_ENET_CRS_DV__PHY_TDO = IOMUX_PAD(0x05B4, 0x01E4, 6, 0x0000, 0, 0),
+ MX6_PAD_ENET_CRS_DV__ANATOP_USBPHY1_TSTO_RX_FS_RXD = IOMUX_PAD(0x05B4, 0x01E4, 7, 0x0000, 0, 0),
+ MX6_PAD_ENET_MDC__MLB_MLBDAT = IOMUX_PAD(0x05B8, 0x01E8, 0, 0x08E0, 0, 0),
MX6_PAD_ENET_MDC__ENET_MDC = IOMUX_PAD(0x05B8, 0x01E8, 1, 0x0000, 0, 0),
+ MX6_PAD_ENET_MDC__ESAI1_TX5_RX0 = IOMUX_PAD(0x05B8, 0x01E8, 2, 0x0858, 0, 0),
+ MX6_PAD_ENET_MDC__ENET_1588_EVENT1_IN = IOMUX_PAD(0x05B8, 0x01E8, 4, 0x0000, 0, 0),
+ MX6_PAD_ENET_MDC__GPIO_1_31 = IOMUX_PAD(0x05B8, 0x01E8, 5, 0x0000, 0, 0),
+ MX6_PAD_ENET_MDC__ANATOP_USBPHY2_TSTO_RX_DISCON_DET = IOMUX_PAD(0x05B8, 0x01E8, 7, 0x0000, 0, 0),
MX6_PAD_ENET_MDIO__ENET_MDIO = IOMUX_PAD(0x05BC, 0x01EC, 1, 0x0810, 0, 0),
+ MX6_PAD_ENET_MDIO__ESAI1_SCKR = IOMUX_PAD(0x05BC, 0x01EC, 2, 0x083C, 0, 0),
+ MX6_PAD_ENET_MDIO__SDMA_DEBUG_BUS_DEVICE_3 = IOMUX_PAD(0x05BC, 0x01EC, 3, 0x0000, 0, 0),
+ MX6_PAD_ENET_MDIO__ENET_1588_EVENT1_OUT = IOMUX_PAD(0x05BC, 0x01EC, 4, 0x0000, 0, 0),
+ MX6_PAD_ENET_MDIO__GPIO_1_22 = IOMUX_PAD(0x05BC, 0x01EC, 5, 0x0000, 0, 0),
+ MX6_PAD_ENET_MDIO__SPDIF_PLOCK = IOMUX_PAD(0x05BC, 0x01EC, 6, 0x0000, 0, 0),
MX6_PAD_ENET_REF_CLK__ENET_TX_CLK = IOMUX_PAD(0x05C0, 0x01F0, 1, 0x0000, 0, 0),
+ MX6_PAD_ENET_REF_CLK__ESAI1_FSR = IOMUX_PAD(0x05C0, 0x01F0, 2, 0x082C, 0, 0),
+ MX6_PAD_ENET_REF_CLK__SDMA_DEBUG_BUS_DEVICE_4 = IOMUX_PAD(0x05C0, 0x01F0, 3, 0x0000, 0, 0),
+ MX6_PAD_ENET_REF_CLK__GPIO_1_23 = IOMUX_PAD(0x05C0, 0x01F0, 5, 0x0000, 0, 0),
+ MX6_PAD_ENET_REF_CLK__SPDIF_SRCLK = IOMUX_PAD(0x05C0, 0x01F0, 6, 0x0000, 0, 0),
+ MX6_PAD_ENET_REF_CLK__ANATOP_USBPHY1_TSTO_RX_SQUELCH = IOMUX_PAD(0x05C0, 0x01F0, 7, 0x0000, 0, 0),
+ MX6_PAD_ENET_RX_ER__ANATOP_USBOTG_ID = IOMUX_PAD(0x05C4, 0x01F4, 0, 0x0790, 0, 0),
+ MX6_PAD_ENET_RX_ER__ENET_RX_ER = IOMUX_PAD(0x05C4, 0x01F4, 1, 0x0000, 0, 0),
+ MX6_PAD_ENET_RX_ER__ESAI1_HCKR = IOMUX_PAD(0x05C4, 0x01F4, 2, 0x0834, 0, 0),
+ MX6_PAD_ENET_RX_ER__SPDIF_IN1 = IOMUX_PAD(0x05C4, 0x01F4, 3, 0x08F0, 1, 0),
+ MX6_PAD_ENET_RX_ER__ENET_1588_EVENT2_OUT = IOMUX_PAD(0x05C4, 0x01F4, 4, 0x0000, 0, 0),
+ MX6_PAD_ENET_RX_ER__GPIO_1_24 = IOMUX_PAD(0x05C4, 0x01F4, 5, 0x0000, 0, 0),
+ MX6_PAD_ENET_RX_ER__PHY_TDI = IOMUX_PAD(0x05C4, 0x01F4, 6, 0x0000, 0, 0),
+ MX6_PAD_ENET_RX_ER__ANATOP_USBPHY1_TSTO_RX_HS_RXD = IOMUX_PAD(0x05C4, 0x01F4, 7, 0x0000, 0, 0),
+ MX6_PAD_ENET_RXD0__OSC32K_32K_OUT = IOMUX_PAD(0x05C8, 0x01F8, 0, 0x0000, 0, 0),
+ MX6_PAD_ENET_RXD0__ENET_RDATA_0 = IOMUX_PAD(0x05C8, 0x01F8, 1, 0x0818, 0, 0),
+ MX6_PAD_ENET_RXD0__ESAI1_HCKT = IOMUX_PAD(0x05C8, 0x01F8, 2, 0x0838, 0, 0),
+ MX6_PAD_ENET_RXD0__SPDIF_OUT1 = IOMUX_PAD(0x05C8, 0x01F8, 3, 0x0000, 0, 0),
MX6_PAD_ENET_RXD0__GPIO_1_27 = IOMUX_PAD(0x05C8, 0x01F8, 5, 0x0000, 0, 0),
+ MX6_PAD_ENET_RXD0__PHY_TMS = IOMUX_PAD(0x05C8, 0x01F8, 6, 0x0000, 0, 0),
+ MX6_PAD_ENET_RXD0__ANATOP_USBPHY1_TSTO_PLL_CLK20DIV = IOMUX_PAD(0x05C8, 0x01F8, 7, 0x0000, 0, 0),
+ MX6_PAD_ENET_RXD1__MLB_MLBSIG = IOMUX_PAD(0x05CC, 0x01FC, 0, 0x08E4, 0, 0),
+ MX6_PAD_ENET_RXD1__ENET_RDATA_1 = IOMUX_PAD(0x05CC, 0x01FC, 1, 0x081C, 0, 0),
+ MX6_PAD_ENET_RXD1__ESAI1_FST = IOMUX_PAD(0x05CC, 0x01FC, 2, 0x0830, 0, 0),
+ MX6_PAD_ENET_RXD1__ENET_1588_EVENT3_OUT = IOMUX_PAD(0x05CC, 0x01FC, 4, 0x0000, 0, 0),
+ MX6_PAD_ENET_RXD1__GPIO_1_26 = IOMUX_PAD(0x05CC, 0x01FC, 5, 0x0000, 0, 0),
+ MX6_PAD_ENET_RXD1__PHY_TCK = IOMUX_PAD(0x05CC, 0x01FC, 6, 0x0000, 0, 0),
+ MX6_PAD_ENET_RXD1__ANATOP_USBPHY1_TSTO_RX_DISCON_DET = IOMUX_PAD(0x05CC, 0x01FC, 7, 0x0000, 0, 0),
+ MX6_PAD_ENET_TX_EN__ENET_TX_EN = IOMUX_PAD(0x05D0, 0x0200, 1, 0x0000, 0, 0),
+ MX6_PAD_ENET_TX_EN__ESAI1_TX3_RX2 = IOMUX_PAD(0x05D0, 0x0200, 2, 0x0850, 0, 0),
+ MX6_PAD_ENET_TX_EN__GPIO_1_28 = IOMUX_PAD(0x05D0, 0x0200, 5, 0x0000, 0, 0),
+ MX6_PAD_ENET_TX_EN__ANATOP_USBPHY2_TSTO_RX_SQUELCH = IOMUX_PAD(0x05D0, 0x0200, 7, 0x0000, 0, 0),
+ MX6_PAD_ENET_TX_EN__I2C4_SCL = IOMUX_PAD(0x05D0, 0x0200, 9 | IOMUX_CONFIG_SION, 0x0880, 0, 0),
+ MX6_PAD_ENET_TXD0__ENET_TDATA_0 = IOMUX_PAD(0x05D4, 0x0204, 1, 0x0000, 0, 0),
+ MX6_PAD_ENET_TXD0__ESAI1_TX4_RX1 = IOMUX_PAD(0x05D4, 0x0204, 2, 0x0854, 0, 0),
+ MX6_PAD_ENET_TXD0__GPIO_1_30 = IOMUX_PAD(0x05D4, 0x0204, 5, 0x0000, 0, 0),
+ MX6_PAD_ENET_TXD0__ANATOP_USBPHY2_TSTO_RX_FS_RXD = IOMUX_PAD(0x05D4, 0x0204, 7, 0x0000, 0, 0),
+ MX6_PAD_ENET_TXD1__MLB_MLBCLK = IOMUX_PAD(0x05D8, 0x0208, 0, 0x08DC, 0, 0),
+ MX6_PAD_ENET_TXD1__ENET_TDATA_1 = IOMUX_PAD(0x05D8, 0x0208, 1, 0x0000, 0, 0),
+ MX6_PAD_ENET_TXD1__ESAI1_TX2_RX3 = IOMUX_PAD(0x05D8, 0x0208, 2, 0x084C, 0, 0),
+ MX6_PAD_ENET_TXD1__ENET_1588_EVENT0_IN = IOMUX_PAD(0x05D8, 0x0208, 4, 0x0000, 0, 0),
+ MX6_PAD_ENET_TXD1__GPIO_1_29 = IOMUX_PAD(0x05D8, 0x0208, 5, 0x0000, 0, 0),
+ MX6_PAD_ENET_TXD1__ANATOP_USBPHY2_TSTO_RX_HS_RXD = IOMUX_PAD(0x05D8, 0x0208, 7, 0x0000, 0, 0),
+ MX6_PAD_ENET_TXD1__I2C4_SDA = IOMUX_PAD(0x05D8, 0x0208, 9 | IOMUX_CONFIG_SION, 0x0884, 0, 0),
+ MX6_PAD_GPIO_0__CCM_CLKO = IOMUX_PAD(0x05DC, 0x020C, 0, 0x0000, 0, 0),
+ MX6_PAD_GPIO_0__KPP_COL_5 = IOMUX_PAD(0x05DC, 0x020C, 2, 0x08C0, 1, 0),
+ MX6_PAD_GPIO_0__ASRC_ASRC_EXT_CLK = IOMUX_PAD(0x05DC, 0x020C, 3, 0x0794, 0, 0),
+ MX6_PAD_GPIO_0__EPIT1_EPITO = IOMUX_PAD(0x05DC, 0x020C, 4, 0x0000, 0, 0),
+ MX6_PAD_GPIO_0__GPIO_1_0 = IOMUX_PAD(0x05DC, 0x020C, 5, 0x0000, 0, 0),
+ MX6_PAD_GPIO_0__USBOH3_USBH1_PWR = IOMUX_PAD(0x05DC, 0x020C, 6, 0x0000, 0, 0),
+ MX6_PAD_GPIO_0__SNVS_HP_WRAPPER_SNVS_VIO_5 = IOMUX_PAD(0x05DC, 0x020C, 7, 0x0000, 0, 0),
+ MX6_PAD_GPIO_1__ESAI1_SCKR = IOMUX_PAD(0x05E0, 0x0210, 0, 0x083C, 1, 0),
+ MX6_PAD_GPIO_1__WDOG2_WDOG_B = IOMUX_PAD(0x05E0, 0x0210, 1, 0x0000, 0, 0),
+ MX6_PAD_GPIO_1__KPP_ROW_5 = IOMUX_PAD(0x05E0, 0x0210, 2, 0x08CC, 1, 0),
+ MX6_PAD_GPIO_1__USBOTG_ID = IOMUX_PAD(0x05E0, 0x0210, 3, 0x0790, 1, 0),
+ MX6_PAD_GPIO_1__PWM2_PWMO = IOMUX_PAD(0x05E0, 0x0210, 4, 0x0000, 0, 0),
+ MX6_PAD_GPIO_1__GPIO_1_1 = IOMUX_PAD(0x05E0, 0x0210, 5, 0x0000, 0, 0),
+ MX6_PAD_GPIO_1__USDHC1_CD = IOMUX_PAD(0x05E0, 0x0210, 6, 0x0000, 0, 0),
+ MX6_PAD_GPIO_1__SRC_TESTER_ACK = IOMUX_PAD(0x05E0, 0x0210, 7, 0x0000, 0, 0),
+ MX6_PAD_GPIO_16__ESAI1_TX3_RX2 = IOMUX_PAD(0x05E4, 0x0214, 0, 0x0850, 1, 0),
+ MX6_PAD_GPIO_16__ENET_1588_EVENT2_IN = IOMUX_PAD(0x05E4, 0x0214, 1, 0x0000, 0, 0),
+ MX6_PAD_GPIO_16__ENET_ANATOP_ETHERNET_REF_OUT = IOMUX_PAD(0x05E4, 0x0214, 2, 0x080C, 0, 0),
+ MX6_PAD_GPIO_16__USDHC1_LCTL = IOMUX_PAD(0x05E4, 0x0214, 3, 0x0000, 0, 0),
+ MX6_PAD_GPIO_16__SPDIF_IN1 = IOMUX_PAD(0x05E4, 0x0214, 4, 0x08F0, 2, 0),
MX6_PAD_GPIO_16__GPIO_7_11 = IOMUX_PAD(0x05E4, 0x0214, 5, 0x0000, 0, 0),
MX6_PAD_GPIO_16__I2C3_SDA = IOMUX_PAD(0x05E4, 0x0214, 6 | IOMUX_CONFIG_SION, 0x087C, 1, 0),
+ MX6_PAD_GPIO_16__SJC_DE_B = IOMUX_PAD(0x05E4, 0x0214, 7, 0x0000, 0, 0),
+ MX6_PAD_GPIO_17__ESAI1_TX0 = IOMUX_PAD(0x05E8, 0x0218, 0, 0x0844, 0, 0),
+ MX6_PAD_GPIO_17__ENET_1588_EVENT3_IN = IOMUX_PAD(0x05E8, 0x0218, 1, 0x0000, 0, 0),
+ MX6_PAD_GPIO_17__CCM_PMIC_RDY = IOMUX_PAD(0x05E8, 0x0218, 2, 0x07D4, 1, 0),
+ MX6_PAD_GPIO_17__SDMA_SDMA_EXT_EVENT_0 = IOMUX_PAD(0x05E8, 0x0218, 3, 0x08E8, 1, 0),
+ MX6_PAD_GPIO_17__SPDIF_OUT1 = IOMUX_PAD(0x05E8, 0x0218, 4, 0x0000, 0, 0),
MX6_PAD_GPIO_17__GPIO_7_12 = IOMUX_PAD(0x05E8, 0x0218, 5, 0x0000, 0, 0),
+ MX6_PAD_GPIO_17__SJC_JTAG_ACT = IOMUX_PAD(0x05E8, 0x0218, 7, 0x0000, 0, 0),
+ MX6_PAD_GPIO_18__ESAI1_TX1 = IOMUX_PAD(0x05EC, 0x021C, 0, 0x0848, 0, 0),
+ MX6_PAD_GPIO_18__ENET_RX_CLK = IOMUX_PAD(0x05EC, 0x021C, 1, 0x0814, 0, 0),
+ MX6_PAD_GPIO_18__USDHC3_VSELECT = IOMUX_PAD(0x05EC, 0x021C, 2, 0x0000, 0, 0),
+ MX6_PAD_GPIO_18__SDMA_SDMA_EXT_EVENT_1 = IOMUX_PAD(0x05EC, 0x021C, 3, 0x08EC, 1, 0),
+ MX6_PAD_GPIO_18__ASRC_ASRC_EXT_CLK = IOMUX_PAD(0x05EC, 0x021C, 4, 0x0794, 1, 0),
MX6_PAD_GPIO_18__GPIO_7_13 = IOMUX_PAD(0x05EC, 0x021C, 5, 0x0000, 0, 0),
+ MX6_PAD_GPIO_18__SNVS_HP_WRAPPER_SNVS_VIO_5_CTL = IOMUX_PAD(0x05EC, 0x021C, 6, 0x0000, 0, 0),
+ MX6_PAD_GPIO_18__SRC_SYSTEM_RST = IOMUX_PAD(0x05EC, 0x021C, 7, 0x0000, 0, 0),
+ MX6_PAD_GPIO_19__KPP_COL_5 = IOMUX_PAD(0x05F0, 0x0220, 0, 0x08C0, 2, 0),
+ MX6_PAD_GPIO_19__ENET_1588_EVENT0_OUT = IOMUX_PAD(0x05F0, 0x0220, 1, 0x0000, 0, 0),
+ MX6_PAD_GPIO_19__SPDIF_OUT1 = IOMUX_PAD(0x05F0, 0x0220, 2, 0x0000, 0, 0),
+ MX6_PAD_GPIO_19__CCM_CLKO = IOMUX_PAD(0x05F0, 0x0220, 3, 0x0000, 0, 0),
+ MX6_PAD_GPIO_19__ECSPI1_RDY = IOMUX_PAD(0x05F0, 0x0220, 4, 0x0000, 0, 0),
MX6_PAD_GPIO_19__GPIO_4_5 = IOMUX_PAD(0x05F0, 0x0220, 5, 0x0000, 0, 0),
+ MX6_PAD_GPIO_19__ENET_TX_ER = IOMUX_PAD(0x05F0, 0x0220, 6, 0x0000, 0, 0),
+ MX6_PAD_GPIO_19__SRC_INT_BOOT = IOMUX_PAD(0x05F0, 0x0220, 7, 0x0000, 0, 0),
+ MX6_PAD_GPIO_2__ESAI1_FST = IOMUX_PAD(0x05F4, 0x0224, 0, 0x0830, 1, 0),
+ MX6_PAD_GPIO_2__OBSERVE_MUX_OBSRV_INT_OUT2 = IOMUX_PAD(0x05F4, 0x0224, 1, 0x0000, 0, 0),
+ MX6_PAD_GPIO_2__KPP_ROW_6 = IOMUX_PAD(0x05F4, 0x0224, 2, 0x08D0, 1, 0),
+ MX6_PAD_GPIO_2__CCM_CCM_OUT_1 = IOMUX_PAD(0x05F4, 0x0224, 3, 0x0000, 0, 0),
+ MX6_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0 = IOMUX_PAD(0x05F4, 0x0224, 4, 0x0000, 0, 0),
MX6_PAD_GPIO_2__GPIO_1_2 = IOMUX_PAD(0x05F4, 0x0224, 5, 0x0000, 0, 0),
+ MX6_PAD_GPIO_2__USDHC2_WP = IOMUX_PAD(0x05F4, 0x0224, 6, 0x0000, 0, 0),
+ MX6_PAD_GPIO_2__MLB_MLBDAT = IOMUX_PAD(0x05F4, 0x0224, 7, 0x08E0, 1, 0),
+ MX6_PAD_GPIO_3__ESAI1_HCKR = IOMUX_PAD(0x05F8, 0x0228, 0, 0x0834, 1, 0),
+ MX6_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0 = IOMUX_PAD(0x05F8, 0x0228, 1, 0x0000, 0, 0),
+ MX6_PAD_GPIO_3__I2C3_SCL = IOMUX_PAD(0x05F8, 0x0228, 2 | IOMUX_CONFIG_SION, 0x0878, 1, 0),
+ MX6_PAD_GPIO_3__ANATOP_ANATOP_24M_OUT = IOMUX_PAD(0x05F8, 0x0228, 3, 0x0000, 0, 0),
+ MX6_PAD_GPIO_3__CCM_CLKO2 = IOMUX_PAD(0x05F8, 0x0228, 4, 0x0000, 0, 0),
+ MX6_PAD_GPIO_3__GPIO_1_3 = IOMUX_PAD(0x05F8, 0x0228, 5, 0x0000, 0, 0),
+ MX6_PAD_GPIO_3__USBOH3_USBH1_OC = IOMUX_PAD(0x05F8, 0x0228, 6, 0x0924, 1, 0),
+ MX6_PAD_GPIO_3__MLB_MLBCLK = IOMUX_PAD(0x05F8, 0x0228, 7, 0x08DC, 1, 0),
+ MX6_PAD_GPIO_4__ESAI1_HCKT = IOMUX_PAD(0x05FC, 0x022C, 0, 0x0838, 1, 0),
+ MX6_PAD_GPIO_4__OBSERVE_MUX_OBSRV_INT_OUT3 = IOMUX_PAD(0x05FC, 0x022C, 1, 0x0000, 0, 0),
+ MX6_PAD_GPIO_4__KPP_COL_7 = IOMUX_PAD(0x05FC, 0x022C, 2, 0x08C8, 1, 0),
+ MX6_PAD_GPIO_4__CCM_CCM_OUT_2 = IOMUX_PAD(0x05FC, 0x022C, 3, 0x0000, 0, 0),
+ MX6_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1 = IOMUX_PAD(0x05FC, 0x022C, 4, 0x0000, 0, 0),
+ MX6_PAD_GPIO_4__GPIO_1_4 = IOMUX_PAD(0x05FC, 0x022C, 5, 0x0000, 0, 0),
+ MX6_PAD_GPIO_4__USDHC2_CD = IOMUX_PAD(0x05FC, 0x022C, 6, 0x0000, 0, 0),
+ MX6_PAD_GPIO_4__OCOTP_CTRL_WRAPPER_FUSE_LATCHED = IOMUX_PAD(0x05FC, 0x022C, 7, 0x0000, 0, 0),
+ MX6_PAD_GPIO_5__ESAI1_TX2_RX3 = IOMUX_PAD(0x0600, 0x0230, 0, 0x084C, 1, 0),
+ MX6_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4 = IOMUX_PAD(0x0600, 0x0230, 1, 0x0000, 0, 0),
+ MX6_PAD_GPIO_5__KPP_ROW_7 = IOMUX_PAD(0x0600, 0x0230, 2, 0x08D4, 1, 0),
+ MX6_PAD_GPIO_5__CCM_CLKO = IOMUX_PAD(0x0600, 0x0230, 3, 0x0000, 0, 0),
+ MX6_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 = IOMUX_PAD(0x0600, 0x0230, 4, 0x0000, 0, 0),
MX6_PAD_GPIO_5__GPIO_1_5 = IOMUX_PAD(0x0600, 0x0230, 5, 0x0000, 0, 0),
MX6_PAD_GPIO_5__I2C3_SCL = IOMUX_PAD(0x0600, 0x0230, 6 | IOMUX_CONFIG_SION, 0x0878, 2, 0),
+ MX6_PAD_GPIO_5__SIMBA_EVENTI = IOMUX_PAD(0x0600, 0x0230, 7, 0x0000, 0, 0),
+ MX6_PAD_GPIO_6__ESAI1_SCKT = IOMUX_PAD(0x0604, 0x0234, 0, 0x0840, 1, 0),
+ MX6_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1 = IOMUX_PAD(0x0604, 0x0234, 1, 0x0000, 0, 0),
+ MX6_PAD_GPIO_6__I2C3_SDA = IOMUX_PAD(0x0604, 0x0234, 2 | IOMUX_CONFIG_SION, 0x087C, 2, 0),
+ MX6_PAD_GPIO_6__CCM_CCM_OUT_0 = IOMUX_PAD(0x0604, 0x0234, 3, 0x0000, 0, 0),
+ MX6_PAD_GPIO_6__CSU_CSU_INT_DEB = IOMUX_PAD(0x0604, 0x0234, 4, 0x0000, 0, 0),
+ MX6_PAD_GPIO_6__GPIO_1_6 = IOMUX_PAD(0x0604, 0x0234, 5, 0x0000, 0, 0),
+ MX6_PAD_GPIO_6__USDHC2_LCTL = IOMUX_PAD(0x0604, 0x0234, 6, 0x0000, 0, 0),
+ MX6_PAD_GPIO_6__MLB_MLBSIG = IOMUX_PAD(0x0604, 0x0234, 7, 0x08E4, 1, 0),
+ MX6_PAD_GPIO_7__ESAI1_TX4_RX1 = IOMUX_PAD(0x0608, 0x0238, 0, 0x0854, 1, 0),
+ MX6_PAD_GPIO_7__EPIT1_EPITO = IOMUX_PAD(0x0608, 0x0238, 2, 0x0000, 0, 0),
+ MX6_PAD_GPIO_7__CAN1_TXCAN = IOMUX_PAD(0x0608, 0x0238, 3, 0x0000, 0, 0),
+ MX6_PAD_GPIO_7__UART2_TXD = IOMUX_PAD(0x0608, 0x0238, 4, 0x0000, 0, 0),
+ MX6_PAD_GPIO_7__UART2_RXD = IOMUX_PAD(0x0608, 0x0238, 4, 0x0904, 2, 0),
+ MX6_PAD_GPIO_7__GPIO_1_7 = IOMUX_PAD(0x0608, 0x0238, 5, 0x0000, 0, 0),
+ MX6_PAD_GPIO_7__SPDIF_PLOCK = IOMUX_PAD(0x0608, 0x0238, 6, 0x0000, 0, 0),
+ MX6_PAD_GPIO_7__USBOH3_OTGUSB_HOST_MODE = IOMUX_PAD(0x0608, 0x0238, 7, 0x0000, 0, 0),
+ MX6_PAD_GPIO_7__I2C4_SCL = IOMUX_PAD(0x0608, 0x0238, 8 | IOMUX_CONFIG_SION, 0x0880, 1, 0),
+ MX6_PAD_GPIO_8__ESAI1_TX5_RX0 = IOMUX_PAD(0x060C, 0x023C, 0, 0x0858, 1, 0),
+ MX6_PAD_GPIO_8__ANATOP_ANATOP_32K_OUT = IOMUX_PAD(0x060C, 0x023C, 1, 0x0000, 0, 0),
+ MX6_PAD_GPIO_8__EPIT2_EPITO = IOMUX_PAD(0x060C, 0x023C, 2, 0x0000, 0, 0),
+ MX6_PAD_GPIO_8__CAN1_RXCAN = IOMUX_PAD(0x060C, 0x023C, 3, 0x07C8, 0, 0),
+ MX6_PAD_GPIO_8__UART2_TXD = IOMUX_PAD(0x060C, 0x023C, 4, 0x0000, 0, 0),
+ MX6_PAD_GPIO_8__UART2_RXD = IOMUX_PAD(0x060C, 0x023C, 4, 0x0904, 3, 0),
+ MX6_PAD_GPIO_8__GPIO_1_8 = IOMUX_PAD(0x060C, 0x023C, 5, 0x0000, 0, 0),
+ MX6_PAD_GPIO_8__SPDIF_SRCLK = IOMUX_PAD(0x060C, 0x023C, 6, 0x0000, 0, 0),
+ MX6_PAD_GPIO_8__USBOH3_OTGUSB_PWRCTL_WAKEUP = IOMUX_PAD(0x060C, 0x023C, 7, 0x0000, 0, 0),
+ MX6_PAD_GPIO_8__I2C4_SDA = IOMUX_PAD(0x060C, 0x023C, 8 | IOMUX_CONFIG_SION, 0x0884, 1, 0),
+ MX6_PAD_GPIO_9__ESAI1_FSR = IOMUX_PAD(0x0610, 0x0240, 0, 0x082C, 1, 0),
+ MX6_PAD_GPIO_9__WDOG1_WDOG_B = IOMUX_PAD(0x0610, 0x0240, 1, 0x0000, 0, 0),
+ MX6_PAD_GPIO_9__KPP_COL_6 = IOMUX_PAD(0x0610, 0x0240, 2, 0x08C4, 1, 0),
+ MX6_PAD_GPIO_9__CCM_REF_EN_B = IOMUX_PAD(0x0610, 0x0240, 3, 0x0000, 0, 0),
+ MX6_PAD_GPIO_9__PWM1_PWMO = IOMUX_PAD(0x0610, 0x0240, 4, 0x0000, 0, 0),
+ MX6_PAD_GPIO_9__GPIO_1_9 = IOMUX_PAD(0x0610, 0x0240, 5, 0x0000, 0, 0),
+ MX6_PAD_GPIO_9__USDHC1_WP = IOMUX_PAD(0x0610, 0x0240, 6, 0x092C, 1, 0),
+ MX6_PAD_GPIO_9__SRC_EARLY_RST = IOMUX_PAD(0x0610, 0x0240, 7, 0x0000, 0, 0),
+ MX6_PAD_JTAG_MOD__SJC_MOD = IOMUX_PAD(0x0614, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_JTAG_TCK__SJC_TCK = IOMUX_PAD(0x0618, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_JTAG_TDI__SJC_TDI = IOMUX_PAD(0x061C, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_JTAG_TDO__SJC_TDO = IOMUX_PAD(0x0620, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_JTAG_TMS__SJC_TMS = IOMUX_PAD(0x0624, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_JTAG_TRSTB__SJC_TRSTB = IOMUX_PAD(0x0628, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL0__ECSPI1_SCLK = IOMUX_PAD(0x062C, 0x0244, 0, 0x07D8, 3, 0),
+ MX6_PAD_KEY_COL0__ENET_RDATA_3 = IOMUX_PAD(0x062C, 0x0244, 1, 0x0824, 0, 0),
+ MX6_PAD_KEY_COL0__AUDMUX_AUD5_TXC = IOMUX_PAD(0x062C, 0x0244, 2, 0x07C0, 1, 0),
+ MX6_PAD_KEY_COL0__KPP_COL_0 = IOMUX_PAD(0x062C, 0x0244, 3, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL0__UART4_TXD = IOMUX_PAD(0x062C, 0x0244, 4, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL0__UART4_RXD = IOMUX_PAD(0x062C, 0x0244, 4, 0x0914, 2, 0),
+ MX6_PAD_KEY_COL0__GPIO_4_6 = IOMUX_PAD(0x062C, 0x0244, 5, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL0__DCIC1_DCIC_OUT = IOMUX_PAD(0x062C, 0x0244, 6, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL0__SRC_ANY_PU_RST = IOMUX_PAD(0x062C, 0x0244, 7, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL1__ECSPI1_MISO = IOMUX_PAD(0x0630, 0x0248, 0, 0x07DC, 3, 0),
+ MX6_PAD_KEY_COL1__ENET_MDIO = IOMUX_PAD(0x0630, 0x0248, 1, 0x0810, 1, 0),
+ MX6_PAD_KEY_COL1__AUDMUX_AUD5_TXFS = IOMUX_PAD(0x0630, 0x0248, 2, 0x07C4, 1, 0),
+ MX6_PAD_KEY_COL1__KPP_COL_1 = IOMUX_PAD(0x0630, 0x0248, 3, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL1__UART5_TXD = IOMUX_PAD(0x0630, 0x0248, 4, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL1__UART5_RXD = IOMUX_PAD(0x0630, 0x0248, 4, 0x091C, 2, 0),
+ MX6_PAD_KEY_COL1__GPIO_4_8 = IOMUX_PAD(0x0630, 0x0248, 5, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL1__USDHC1_VSELECT = IOMUX_PAD(0x0630, 0x0248, 6, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL1__PL301_SIM_MX6DL_PER1_HADDR_1 = IOMUX_PAD(0x0630, 0x0248, 7, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL2__ECSPI1_SS1 = IOMUX_PAD(0x0634, 0x024C, 0, 0x07E8, 2, 0),
+ MX6_PAD_KEY_COL2__ENET_RDATA_2 = IOMUX_PAD(0x0634, 0x024C, 1, 0x0820, 0, 0),
+ MX6_PAD_KEY_COL2__CAN1_TXCAN = IOMUX_PAD(0x0634, 0x024C, 2, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL2__KPP_COL_2 = IOMUX_PAD(0x0634, 0x024C, 3, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL2__ENET_MDC = IOMUX_PAD(0x0634, 0x024C, 4, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL2__GPIO_4_10 = IOMUX_PAD(0x0634, 0x024C, 5, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL2__USBOH3_H1USB_PWRCTL_WAKEUP = IOMUX_PAD(0x0634, 0x024C, 6, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL2__PL301_SIM_MX6DL_PER1_HADDR_3 = IOMUX_PAD(0x0634, 0x024C, 7, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL3__ECSPI1_SS3 = IOMUX_PAD(0x0638, 0x0250, 0, 0x07F0, 1, 0),
+ MX6_PAD_KEY_COL3__ENET_CRS = IOMUX_PAD(0x0638, 0x0250, 1, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL3__HDMI_TX_DDC_SCL = IOMUX_PAD(0x0638, 0x0250, 2, 0x0860, 1, 0),
+ MX6_PAD_KEY_COL3__KPP_COL_3 = IOMUX_PAD(0x0638, 0x0250, 3, 0x0000, 0, 0),
MX6_PAD_KEY_COL3__I2C2_SCL = IOMUX_PAD(0x0638, 0x0250, 4 | IOMUX_CONFIG_SION, 0x0870, 1, 0),
MX6_PAD_KEY_COL3__GPIO_4_12 = IOMUX_PAD(0x0638, 0x0250, 5, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL3__SPDIF_IN1 = IOMUX_PAD(0x0638, 0x0250, 6, 0x08F0, 3, 0),
+ MX6_PAD_KEY_COL3__PL301_SIM_MX6DL_PER1_HADDR_5 = IOMUX_PAD(0x0638, 0x0250, 7, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL4__CAN2_TXCAN = IOMUX_PAD(0x063C, 0x0254, 0, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL4__IPU1_SISG_4 = IOMUX_PAD(0x063C, 0x0254, 1, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL4__USBOH3_USBOTG_OC = IOMUX_PAD(0x063C, 0x0254, 2, 0x0920, 1, 0),
+ MX6_PAD_KEY_COL4__KPP_COL_4 = IOMUX_PAD(0x063C, 0x0254, 3, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL4__UART5_CTS = IOMUX_PAD(0x063C, 0x0254, 4, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL4__UART5_RTS = IOMUX_PAD(0x063C, 0x0254, 4, 0x0918, 2, 0),
+ MX6_PAD_KEY_COL4__GPIO_4_14 = IOMUX_PAD(0x063C, 0x0254, 5, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL4__MMDC_MMDC_DEBUG_49 = IOMUX_PAD(0x063C, 0x0254, 6, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL4__PL301_SIM_MX6DL_PER1_HADDR_7 = IOMUX_PAD(0x063C, 0x0254, 7, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW0__ECSPI1_MOSI = IOMUX_PAD(0x0640, 0x0258, 0, 0x07E0, 3, 0),
+ MX6_PAD_KEY_ROW0__ENET_TDATA_3 = IOMUX_PAD(0x0640, 0x0258, 1, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW0__AUDMUX_AUD5_TXD = IOMUX_PAD(0x0640, 0x0258, 2, 0x07B4, 1, 0),
+ MX6_PAD_KEY_ROW0__KPP_ROW_0 = IOMUX_PAD(0x0640, 0x0258, 3, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW0__UART4_TXD = IOMUX_PAD(0x0640, 0x0258, 4, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW0__UART4_RXD = IOMUX_PAD(0x0640, 0x0258, 4, 0x0914, 3, 0),
+ MX6_PAD_KEY_ROW0__GPIO_4_7 = IOMUX_PAD(0x0640, 0x0258, 5, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW0__DCIC2_DCIC_OUT = IOMUX_PAD(0x0640, 0x0258, 6, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW0__PL301_SIM_MX6DL_PER1_HADDR_0 = IOMUX_PAD(0x0640, 0x0258, 7, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW1__ECSPI1_SS0 = IOMUX_PAD(0x0644, 0x025C, 0, 0x07E4, 3, 0),
+ MX6_PAD_KEY_ROW1__ENET_COL = IOMUX_PAD(0x0644, 0x025C, 1, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW1__AUDMUX_AUD5_RXD = IOMUX_PAD(0x0644, 0x025C, 2, 0x07B0, 1, 0),
+ MX6_PAD_KEY_ROW1__KPP_ROW_1 = IOMUX_PAD(0x0644, 0x025C, 3, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW1__UART5_TXD = IOMUX_PAD(0x0644, 0x025C, 4, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW1__UART5_RXD = IOMUX_PAD(0x0644, 0x025C, 4, 0x091C, 3, 0),
+ MX6_PAD_KEY_ROW1__GPIO_4_9 = IOMUX_PAD(0x0644, 0x025C, 5, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW1__USDHC2_VSELECT = IOMUX_PAD(0x0644, 0x025C, 6, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW1__PL301_SIM_MX6DL_PER1_HADDR_2 = IOMUX_PAD(0x0644, 0x025C, 7, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW2__ECSPI1_SS2 = IOMUX_PAD(0x0648, 0x0260, 0, 0x07EC, 1, 0),
+ MX6_PAD_KEY_ROW2__ENET_TDATA_2 = IOMUX_PAD(0x0648, 0x0260, 1, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW2__CAN1_RXCAN = IOMUX_PAD(0x0648, 0x0260, 2, 0x07C8, 1, 0),
+ MX6_PAD_KEY_ROW2__KPP_ROW_2 = IOMUX_PAD(0x0648, 0x0260, 3, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW2__USDHC2_VSELECT = IOMUX_PAD(0x0648, 0x0260, 4, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW2__GPIO_4_11 = IOMUX_PAD(0x0648, 0x0260, 5, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW2__HDMI_TX_CEC_LINE = IOMUX_PAD(0x0648, 0x0260, 6, 0x085C, 1, 0),
+ MX6_PAD_KEY_ROW2__PL301_SIM_MX6DL_PER1_HADDR_4 = IOMUX_PAD(0x0648, 0x0260, 7, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW3__OSC32K_32K_OUT = IOMUX_PAD(0x064C, 0x0264, 0, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW3__ASRC_ASRC_EXT_CLK = IOMUX_PAD(0x064C, 0x0264, 1, 0x0794, 2, 0),
+ MX6_PAD_KEY_ROW3__HDMI_TX_DDC_SDA = IOMUX_PAD(0x064C, 0x0264, 2, 0x0864, 1, 0),
+ MX6_PAD_KEY_ROW3__KPP_ROW_3 = IOMUX_PAD(0x064C, 0x0264, 3, 0x0000, 0, 0),
MX6_PAD_KEY_ROW3__I2C2_SDA = IOMUX_PAD(0x064C, 0x0264, 4 | IOMUX_CONFIG_SION, 0x0874, 1, 0),
MX6_PAD_KEY_ROW3__GPIO_4_13 = IOMUX_PAD(0x064C, 0x0264, 5, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW3__USDHC1_VSELECT = IOMUX_PAD(0x064C, 0x0264, 6, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW3__PL301_SIM_MX6DL_PER1_HADDR_6 = IOMUX_PAD(0x064C, 0x0264, 7, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW4__CAN2_RXCAN = IOMUX_PAD(0x0650, 0x0268, 0, 0x07CC, 0, 0),
+ MX6_PAD_KEY_ROW4__IPU1_SISG_5 = IOMUX_PAD(0x0650, 0x0268, 1, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW4__USBOH3_USBOTG_PWR = IOMUX_PAD(0x0650, 0x0268, 2, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW4__KPP_ROW_4 = IOMUX_PAD(0x0650, 0x0268, 3, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW4__UART5_CTS = IOMUX_PAD(0x0650, 0x0268, 4, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW4__UART5_RTS = IOMUX_PAD(0x0650, 0x0268, 4, 0x0918, 3, 0),
+ MX6_PAD_KEY_ROW4__GPIO_4_15 = IOMUX_PAD(0x0650, 0x0268, 5, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW4__MMDC_MMDC_DEBUG_50 = IOMUX_PAD(0x0650, 0x0268, 6, 0x0000, 0, 0),
+ MX6_PAD_KEY_ROW4__PL301_SIM_MX6DL_PER1_HADDR_8 = IOMUX_PAD(0x0650, 0x0268, 7, 0x0000, 0, 0),
+ MX6_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_NANDF_ALE__RAWNAND_ALE = IOMUX_PAD(0x0654, 0x026C, 0, 0x0000, 0, 0),
+ MX6_PAD_NANDF_ALE__USDHC4_RST = IOMUX_PAD(0x0654, 0x026C, 1, 0x0000, 0, 0),
+ MX6_PAD_NANDF_ALE__PCIE_CTRL_DIAG_STATUS_BUS_MUX_0 = IOMUX_PAD(0x0654, 0x026C, 2, 0x0000, 0, 0),
+ MX6_PAD_NANDF_ALE__USBOH3_UH3_DFD_OUT_12 = IOMUX_PAD(0x0654, 0x026C, 3, 0x0000, 0, 0),
+ MX6_PAD_NANDF_ALE__USBOH3_UH2_DFD_OUT_12 = IOMUX_PAD(0x0654, 0x026C, 4, 0x0000, 0, 0),
+ MX6_PAD_NANDF_ALE__GPIO_6_8 = IOMUX_PAD(0x0654, 0x026C, 5, 0x0000, 0, 0),
+ MX6_PAD_NANDF_ALE__MIPI_CORE_DPHY_TEST_IN_24 = IOMUX_PAD(0x0654, 0x026C, 6, 0x0000, 0, 0),
+ MX6_PAD_NANDF_ALE__USDHC3_CLKI = IOMUX_PAD(0x0654, 0x026C, 8, 0x0934, 0, 0),
+ MX6_PAD_NANDF_CLE__RAWNAND_CLE = IOMUX_PAD(0x0658, 0x0270, 0, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CLE__PCIE_CTRL_DIAG_STATUS_BUS_MUX_31 = IOMUX_PAD(0x0658, 0x0270, 2, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CLE__USBOH3_UH3_DFD_OUT_11 = IOMUX_PAD(0x0658, 0x0270, 3, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CLE__USBOH3_UH2_DFD_OUT_11 = IOMUX_PAD(0x0658, 0x0270, 4, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CLE__GPIO_6_7 = IOMUX_PAD(0x0658, 0x0270, 5, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CLE__MIPI_CORE_DPHY_TEST_IN_23 = IOMUX_PAD(0x0658, 0x0270, 6, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CLE__USDHC3_CLKO = IOMUX_PAD(0x0658, 0x0270, 8, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CS0__RAWNAND_CE0N = IOMUX_PAD(0x065C, 0x0274, 0, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CS0__USBOH3_UH3_DFD_OUT_15 = IOMUX_PAD(0x065C, 0x0274, 3, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CS0__USBOH3_UH2_DFD_OUT_15 = IOMUX_PAD(0x065C, 0x0274, 4, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CS0__GPIO_6_11 = IOMUX_PAD(0x065C, 0x0274, 5, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CS0__USDHC1_CLKO = IOMUX_PAD(0x065C, 0x0274, 8, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CS1__RAWNAND_CE1N = IOMUX_PAD(0x0660, 0x0278, 0, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CS1__USDHC4_VSELECT = IOMUX_PAD(0x0660, 0x0278, 1, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CS1__USDHC3_VSELECT = IOMUX_PAD(0x0660, 0x0278, 2, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CS1__PCIE_CTRL_DIAG_STATUS_BUS_MUX_3 = IOMUX_PAD(0x0660, 0x0278, 4, 0x0000, 0, 0),
MX6_PAD_NANDF_CS1__GPIO_6_14 = IOMUX_PAD(0x0660, 0x0278, 5, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CS1__PL301_SIM_MX6DL_PER1_HREADYOUT = IOMUX_PAD(0x0660, 0x0278, 7, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CS1__USDHC1_CLKI = IOMUX_PAD(0x0660, 0x0278, 8, 0x0928, 0, 0),
+ MX6_PAD_NANDF_CS2__RAWNAND_CE2N = IOMUX_PAD(0x0664, 0x027C, 0, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CS2__IPU1_SISG_0 = IOMUX_PAD(0x0664, 0x027C, 1, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CS2__ESAI1_TX0 = IOMUX_PAD(0x0664, 0x027C, 2, 0x0844, 1, 0),
+ MX6_PAD_NANDF_CS2__WEIM_WEIM_CRE = IOMUX_PAD(0x0664, 0x027C, 3, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CS2__CCM_CLKO2 = IOMUX_PAD(0x0664, 0x027C, 4, 0x0000, 0, 0),
MX6_PAD_NANDF_CS2__GPIO_6_15 = IOMUX_PAD(0x0664, 0x027C, 5, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CS2__USDHC2_CLKO = IOMUX_PAD(0x0664, 0x027C, 8, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CS3__RAWNAND_CE3N = IOMUX_PAD(0x0668, 0x0280, 0, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CS3__IPU1_SISG_1 = IOMUX_PAD(0x0668, 0x0280, 1, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CS3__ESAI1_TX1 = IOMUX_PAD(0x0668, 0x0280, 2, 0x0848, 1, 0),
+ MX6_PAD_NANDF_CS3__WEIM_WEIM_A_26 = IOMUX_PAD(0x0668, 0x0280, 3, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CS3__PCIE_CTRL_DIAG_STATUS_BUS_MUX_4 = IOMUX_PAD(0x0668, 0x0280, 4, 0x0000, 0, 0),
MX6_PAD_NANDF_CS3__GPIO_6_16 = IOMUX_PAD(0x0668, 0x0280, 5, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CS3__TPSMP_CLK = IOMUX_PAD(0x0668, 0x0280, 7, 0x0000, 0, 0),
+ MX6_PAD_NANDF_CS3__USDHC2_CLKI = IOMUX_PAD(0x0668, 0x0280, 8, 0x0930, 0, 0),
+ MX6_PAD_NANDF_CS3__I2C4_SDA = IOMUX_PAD(0x0668, 0x0280, 9 | IOMUX_CONFIG_SION, 0x0884, 2, 0),
+ MX6_PAD_NANDF_D0__RAWNAND_D0 = IOMUX_PAD(0x066C, 0x0284, 0, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D0__USDHC1_DAT4 = IOMUX_PAD(0x066C, 0x0284, 1, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D0__GPU3D_GPU_DEBUG_OUT_0 = IOMUX_PAD(0x066C, 0x0284, 2, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D0__USBOH3_UH2_DFD_OUT_16 = IOMUX_PAD(0x066C, 0x0284, 3, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D0__USBOH3_UH3_DFD_OUT_16 = IOMUX_PAD(0x066C, 0x0284, 4, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D0__GPIO_2_0 = IOMUX_PAD(0x066C, 0x0284, 5, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D0__IPU1_IPU_DIAG_BUS_0 = IOMUX_PAD(0x066C, 0x0284, 6, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D1__RAWNAND_D1 = IOMUX_PAD(0x0670, 0x0288, 0, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D1__USDHC1_DAT5 = IOMUX_PAD(0x0670, 0x0288, 1, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D1__GPU3D_GPU_DEBUG_OUT_1 = IOMUX_PAD(0x0670, 0x0288, 2, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D1__USBOH3_UH2_DFD_OUT_17 = IOMUX_PAD(0x0670, 0x0288, 3, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D1__USBOH3_UH3_DFD_OUT_17 = IOMUX_PAD(0x0670, 0x0288, 4, 0x0000, 0, 0),
MX6_PAD_NANDF_D1__GPIO_2_1 = IOMUX_PAD(0x0670, 0x0288, 5, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D1__IPU1_IPU_DIAG_BUS_1 = IOMUX_PAD(0x0670, 0x0288, 6, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D2__RAWNAND_D2 = IOMUX_PAD(0x0674, 0x028C, 0, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D2__USDHC1_DAT6 = IOMUX_PAD(0x0674, 0x028C, 1, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D2__GPU3D_GPU_DEBUG_OUT_2 = IOMUX_PAD(0x0674, 0x028C, 2, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D2__USBOH3_UH2_DFD_OUT_18 = IOMUX_PAD(0x0674, 0x028C, 3, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D2__USBOH3_UH3_DFD_OUT_18 = IOMUX_PAD(0x0674, 0x028C, 4, 0x0000, 0, 0),
MX6_PAD_NANDF_D2__GPIO_2_2 = IOMUX_PAD(0x0674, 0x028C, 5, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D2__IPU1_IPU_DIAG_BUS_2 = IOMUX_PAD(0x0674, 0x028C, 6, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D3__RAWNAND_D3 = IOMUX_PAD(0x0678, 0x0290, 0, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D3__USDHC1_DAT7 = IOMUX_PAD(0x0678, 0x0290, 1, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D3__GPU3D_GPU_DEBUG_OUT_3 = IOMUX_PAD(0x0678, 0x0290, 2, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D3__USBOH3_UH2_DFD_OUT_19 = IOMUX_PAD(0x0678, 0x0290, 3, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D3__USBOH3_UH3_DFD_OUT_19 = IOMUX_PAD(0x0678, 0x0290, 4, 0x0000, 0, 0),
MX6_PAD_NANDF_D3__GPIO_2_3 = IOMUX_PAD(0x0678, 0x0290, 5, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D3__IPU1_IPU_DIAG_BUS_3 = IOMUX_PAD(0x0678, 0x0290, 6, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D4__RAWNAND_D4 = IOMUX_PAD(0x067C, 0x0294, 0, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D4__USDHC2_DAT4 = IOMUX_PAD(0x067C, 0x0294, 1, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D4__GPU3D_GPU_DEBUG_OUT_4 = IOMUX_PAD(0x067C, 0x0294, 2, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D4__USBOH3_UH2_DFD_OUT_20 = IOMUX_PAD(0x067C, 0x0294, 3, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D4__USBOH3_UH3_DFD_OUT_20 = IOMUX_PAD(0x067C, 0x0294, 4, 0x0000, 0, 0),
MX6_PAD_NANDF_D4__GPIO_2_4 = IOMUX_PAD(0x067C, 0x0294, 5, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D4__IPU1_IPU_DIAG_BUS_4 = IOMUX_PAD(0x067C, 0x0294, 6, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D5__RAWNAND_D5 = IOMUX_PAD(0x0680, 0x0298, 0, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D5__USDHC2_DAT5 = IOMUX_PAD(0x0680, 0x0298, 1, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D5__GPU3D_GPU_DEBUG_OUT_5 = IOMUX_PAD(0x0680, 0x0298, 2, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D5__USBOH3_UH2_DFD_OUT_21 = IOMUX_PAD(0x0680, 0x0298, 3, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D5__USBOH3_UH3_DFD_OUT_21 = IOMUX_PAD(0x0680, 0x0298, 4, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D5__GPIO_2_5 = IOMUX_PAD(0x0680, 0x0298, 5, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D5__IPU1_IPU_DIAG_BUS_5 = IOMUX_PAD(0x0680, 0x0298, 6, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D6__RAWNAND_D6 = IOMUX_PAD(0x0684, 0x029C, 0, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D6__USDHC2_DAT6 = IOMUX_PAD(0x0684, 0x029C, 1, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D6__GPU3D_GPU_DEBUG_OUT_6 = IOMUX_PAD(0x0684, 0x029C, 2, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D6__USBOH3_UH2_DFD_OUT_22 = IOMUX_PAD(0x0684, 0x029C, 3, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D6__USBOH3_UH3_DFD_OUT_22 = IOMUX_PAD(0x0684, 0x029C, 4, 0x0000, 0, 0),
MX6_PAD_NANDF_D6__GPIO_2_6 = IOMUX_PAD(0x0684, 0x029C, 5, 0x0000, 0, 0),
- MX6_PAD_RGMII_RD0__ENET_RGMII_RD0 = IOMUX_PAD(0x0694, 0x02AC, 1, 0x0818, 1, 0),
+ MX6_PAD_NANDF_D6__IPU1_IPU_DIAG_BUS_6 = IOMUX_PAD(0x0684, 0x029C, 6, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D7__RAWNAND_D7 = IOMUX_PAD(0x0688, 0x02A0, 0, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D7__USDHC2_DAT7 = IOMUX_PAD(0x0688, 0x02A0, 1, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D7__GPU3D_GPU_DEBUG_OUT_7 = IOMUX_PAD(0x0688, 0x02A0, 2, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D7__USBOH3_UH2_DFD_OUT_23 = IOMUX_PAD(0x0688, 0x02A0, 3, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D7__USBOH3_UH3_DFD_OUT_23 = IOMUX_PAD(0x0688, 0x02A0, 4, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D7__GPIO_2_7 = IOMUX_PAD(0x0688, 0x02A0, 5, 0x0000, 0, 0),
+ MX6_PAD_NANDF_D7__IPU1_IPU_DIAG_BUS_7 = IOMUX_PAD(0x0688, 0x02A0, 6, 0x0000, 0, 0),
+ MX6_PAD_NANDF_RB0__RAWNAND_READY0 = IOMUX_PAD(0x068C, 0x02A4, 0, 0x0000, 0, 0),
+ MX6_PAD_NANDF_RB0__PCIE_CTRL_DIAG_STATUS_BUS_MUX_2 = IOMUX_PAD(0x068C, 0x02A4, 2, 0x0000, 0, 0),
+ MX6_PAD_NANDF_RB0__USBOH3_UH3_DFD_OUT_14 = IOMUX_PAD(0x068C, 0x02A4, 3, 0x0000, 0, 0),
+ MX6_PAD_NANDF_RB0__USBOH3_UH2_DFD_OUT_14 = IOMUX_PAD(0x068C, 0x02A4, 4, 0x0000, 0, 0),
+ MX6_PAD_NANDF_RB0__GPIO_6_10 = IOMUX_PAD(0x068C, 0x02A4, 5, 0x0000, 0, 0),
+ MX6_PAD_NANDF_RB0__MIPI_CORE_DPHY_TEST_OUT_33 = IOMUX_PAD(0x068C, 0x02A4, 6, 0x0000, 0, 0),
+ MX6_PAD_NANDF_RB0__USDHC4_CLKI = IOMUX_PAD(0x068C, 0x02A4, 8, 0x0938, 0, 0),
+ MX6_PAD_NANDF_WP_B__RAWNAND_RESETN = IOMUX_PAD(0x0690, 0x02A8, 0, 0x0000, 0, 0),
+ MX6_PAD_NANDF_WP_B__PCIE_CTRL_DIAG_STATUS_BUS_MUX_1 = IOMUX_PAD(0x0690, 0x02A8, 2, 0x0000, 0, 0),
+ MX6_PAD_NANDF_WP_B__USBOH3_UH3_DFD_OUT_13 = IOMUX_PAD(0x0690, 0x02A8, 3, 0x0000, 0, 0),
+ MX6_PAD_NANDF_WP_B__USBOH3_UH2_DFD_OUT_13 = IOMUX_PAD(0x0690, 0x02A8, 4, 0x0000, 0, 0),
+ MX6_PAD_NANDF_WP_B__GPIO_6_9 = IOMUX_PAD(0x0690, 0x02A8, 5, 0x0000, 0, 0),
+ MX6_PAD_NANDF_WP_B__MIPI_CORE_DPHY_TEST_OUT_32 = IOMUX_PAD(0x0690, 0x02A8, 6, 0x0000, 0, 0),
+ MX6_PAD_NANDF_WP_B__USDHC4_CLKO = IOMUX_PAD(0x0690, 0x02A8, 8, 0x0000, 0, 0),
+ MX6_PAD_NANDF_WP_B__I2C4_SCL = IOMUX_PAD(0x0690, 0x02A8, 9 | IOMUX_CONFIG_SION, 0x0880, 2, 0),
+ MX6_PAD_PMIC_ON_REQ__SNVS_LP_WRAPPER_SNVS_WAKEUP_ALARM = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_PMIC_STBY_REQ__CCM_PMIC_VSTBY_REQ = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_POR_B__SRC_POR_B = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_RESET_IN_B__SRC_RESET_B = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0),
+ MX6_PAD_RGMII_RD0__MIPI_HSI_CTRL_RX_READY = IOMUX_PAD(0x0694, 0x02AC, 0, 0x0000, 0, 0),
+ MX6_PAD_RGMII_RD0__ENET_RGMII_RD0 = IOMUX_PAD(0x0694, 0x02AC, 1, 0x0818, 1, 0),
MX6_PAD_RGMII_RD0__GPIO_6_25 = IOMUX_PAD(0x0694, 0x02AC, 5, 0x0000, 0, 0),
+ MX6_PAD_RGMII_RD0__MIPI_CORE_DPHY_TEST_IN_6 = IOMUX_PAD(0x0694, 0x02AC, 6, 0x0000, 0, 0),
+ MX6_PAD_RGMII_RD1__MIPI_HSI_CTRL_TX_FLAG = IOMUX_PAD(0x0698, 0x02B0, 0, 0x0000, 0, 0),
MX6_PAD_RGMII_RD1__ENET_RGMII_RD1 = IOMUX_PAD(0x0698, 0x02B0, 1, 0x081C, 1, 0),
MX6_PAD_RGMII_RD1__GPIO_6_27 = IOMUX_PAD(0x0698, 0x02B0, 5, 0x0000, 0, 0),
+ MX6_PAD_RGMII_RD1__MIPI_CORE_DPHY_TEST_IN_8 = IOMUX_PAD(0x0698, 0x02B0, 6, 0x0000, 0, 0),
+ MX6_PAD_RGMII_RD1__SJC_FAIL = IOMUX_PAD(0x0698, 0x02B0, 7, 0x0000, 0, 0),
+ MX6_PAD_RGMII_RD2__MIPI_HSI_CTRL_TX_DATA = IOMUX_PAD(0x069C, 0x02B4, 0, 0x0000, 0, 0),
MX6_PAD_RGMII_RD2__ENET_RGMII_RD2 = IOMUX_PAD(0x069C, 0x02B4, 1, 0x0820, 1, 0),
MX6_PAD_RGMII_RD2__GPIO_6_28 = IOMUX_PAD(0x069C, 0x02B4, 5, 0x0000, 0, 0),
+ MX6_PAD_RGMII_RD2__MIPI_CORE_DPHY_TEST_IN_9 = IOMUX_PAD(0x069C, 0x02B4, 6, 0x0000, 0, 0),
+ MX6_PAD_RGMII_RD3__MIPI_HSI_CTRL_TX_WAKE = IOMUX_PAD(0x06A0, 0x02B8, 0, 0x0000, 0, 0),
MX6_PAD_RGMII_RD3__ENET_RGMII_RD3 = IOMUX_PAD(0x06A0, 0x02B8, 1, 0x0824, 1, 0),
MX6_PAD_RGMII_RD3__GPIO_6_29 = IOMUX_PAD(0x06A0, 0x02B8, 5, 0x0000, 0, 0),
+ MX6_PAD_RGMII_RD3__MIPI_CORE_DPHY_TEST_IN_10 = IOMUX_PAD(0x06A0, 0x02B8, 6, 0x0000, 0, 0),
+ MX6_PAD_RGMII_RX_CTL__USBOH3_H3_DATA = IOMUX_PAD(0x06A4, 0x02BC, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0),
MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL = IOMUX_PAD(0x06A4, 0x02BC, 1, 0x0828, 1, 0),
- MX6_PAD_RGMII_RX_CTL__GPIO_6_24 = IOMUX_PAD(0x06A4, 0x02BC, 5, 0x0000, 0, 0),
+ MX6_PAD_RGMII_RX_CTL__GPIO_6_24 = IOMUX_PAD(0x06A4, 0x02BC, 5, 0x0000, 0, 0),
+ MX6_PAD_RGMII_RX_CTL__MIPI_CORE_DPHY_TEST_IN_5 = IOMUX_PAD(0x06A4, 0x02BC, 6, 0x0000, 0, 0),
+ MX6_PAD_RGMII_RXC__USBOH3_H3_STROBE = IOMUX_PAD(0x06A8, 0x02C0, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0),
+ MX6_PAD_RGMII_RXC__USBOH3_H3_STROBE_START = IOMUX_PAD(0x06A8, 0x02C0, 0 | IOMUX_CONFIG_SION, 0x0000, 0, PAD_CTL_PUS_47K_UP),
MX6_PAD_RGMII_RXC__ENET_RGMII_RXC = IOMUX_PAD(0x06A8, 0x02C0, 1, 0x0814, 1, 0),
MX6_PAD_RGMII_RXC__GPIO_6_30 = IOMUX_PAD(0x06A8, 0x02C0, 5, 0x0000, 0, 0),
+ MX6_PAD_RGMII_RXC__MIPI_CORE_DPHY_TEST_IN_11 = IOMUX_PAD(0x06A8, 0x02C0, 6, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TD0__MIPI_HSI_CTRL_TX_READY = IOMUX_PAD(0x06AC, 0x02C4, 0, 0x0000, 0, 0),
MX6_PAD_RGMII_TD0__ENET_RGMII_TD0 = IOMUX_PAD(0x06AC, 0x02C4, 1, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TD0__GPIO_6_20 = IOMUX_PAD(0x06AC, 0x02C4, 5, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TD0__MIPI_CORE_DPHY_TEST_IN_1 = IOMUX_PAD(0x06AC, 0x02C4, 6, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TD1__MIPI_HSI_CTRL_RX_FLAG = IOMUX_PAD(0x06B0, 0x02C8, 0, 0x0000, 0, 0),
MX6_PAD_RGMII_TD1__ENET_RGMII_TD1 = IOMUX_PAD(0x06B0, 0x02C8, 1, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TD1__GPIO_6_21 = IOMUX_PAD(0x06B0, 0x02C8, 5, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TD1__MIPI_CORE_DPHY_TEST_IN_2 = IOMUX_PAD(0x06B0, 0x02C8, 6, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TD1__CCM_PLL3_BYP = IOMUX_PAD(0x06B0, 0x02C8, 7, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TD2__MIPI_HSI_CTRL_RX_DATA = IOMUX_PAD(0x06B4, 0x02CC, 0, 0x0000, 0, 0),
MX6_PAD_RGMII_TD2__ENET_RGMII_TD2 = IOMUX_PAD(0x06B4, 0x02CC, 1, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TD2__GPIO_6_22 = IOMUX_PAD(0x06B4, 0x02CC, 5, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TD2__MIPI_CORE_DPHY_TEST_IN_3 = IOMUX_PAD(0x06B4, 0x02CC, 6, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TD2__CCM_PLL2_BYP = IOMUX_PAD(0x06B4, 0x02CC, 7, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TD3__MIPI_HSI_CTRL_RX_WAKE = IOMUX_PAD(0x06B8, 0x02D0, 0, 0x0000, 0, 0),
MX6_PAD_RGMII_TD3__ENET_RGMII_TD3 = IOMUX_PAD(0x06B8, 0x02D0, 1, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TD3__GPIO_6_23 = IOMUX_PAD(0x06B8, 0x02D0, 5, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TD3__MIPI_CORE_DPHY_TEST_IN_4 = IOMUX_PAD(0x06B8, 0x02D0, 6, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TX_CTL__USBOH3_H2_STROBE = IOMUX_PAD(0x06BC, 0x02D4, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TX_CTL__USBOH3_H2_STROBE_START = IOMUX_PAD(0x06BC, 0x02D4, 0 | IOMUX_CONFIG_SION, 0x0000, 0, PAD_CTL_PUS_47K_UP),
MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL = IOMUX_PAD(0x06BC, 0x02D4, 1, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TX_CTL__GPIO_6_26 = IOMUX_PAD(0x06BC, 0x02D4, 5, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TX_CTL__MIPI_CORE_DPHY_TEST_IN_7 = IOMUX_PAD(0x06BC, 0x02D4, 6, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TX_CTL__ENET_ANATOP_ETHERNET_REF_OUT = IOMUX_PAD(0x06BC, 0x02D4, 7, 0x080C, 1, 0),
+ MX6_PAD_RGMII_TXC__USBOH3_H2_DATA = IOMUX_PAD(0x06C0, 0x02D8, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0),
MX6_PAD_RGMII_TXC__ENET_RGMII_TXC = IOMUX_PAD(0x06C0, 0x02D8, 1, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TXC__SPDIF_SPDIF_EXTCLK = IOMUX_PAD(0x06C0, 0x02D8, 2, 0x08F4, 1, 0),
+ MX6_PAD_RGMII_TXC__GPIO_6_19 = IOMUX_PAD(0x06C0, 0x02D8, 5, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TXC__MIPI_CORE_DPHY_TEST_IN_0 = IOMUX_PAD(0x06C0, 0x02D8, 6, 0x0000, 0, 0),
+ MX6_PAD_RGMII_TXC__ANATOP_ANATOP_24M_OUT = IOMUX_PAD(0x06C0, 0x02D8, 7, 0x0000, 0, 0),
MX6_PAD_SD1_CLK__USDHC1_CLK = IOMUX_PAD(0x06C4, 0x02DC, 0, 0x0928, 1, 0),
+ MX6_PAD_SD1_CLK__OSC32K_32K_OUT = IOMUX_PAD(0x06C4, 0x02DC, 2, 0x0000, 0, 0),
+ MX6_PAD_SD1_CLK__GPT_CLKIN = IOMUX_PAD(0x06C4, 0x02DC, 3, 0x0000, 0, 0),
+ MX6_PAD_SD1_CLK__GPIO_1_20 = IOMUX_PAD(0x06C4, 0x02DC, 5, 0x0000, 0, 0),
+ MX6_PAD_SD1_CLK__PHY_DTB_0 = IOMUX_PAD(0x06C4, 0x02DC, 6, 0x0000, 0, 0),
MX6_PAD_SD1_CMD__USDHC1_CMD = IOMUX_PAD(0x06C8, 0x02E0, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0),
+ MX6_PAD_SD1_CMD__PWM4_PWMO = IOMUX_PAD(0x06C8, 0x02E0, 2, 0x0000, 0, 0),
+ MX6_PAD_SD1_CMD__GPT_CMPOUT1 = IOMUX_PAD(0x06C8, 0x02E0, 3, 0x0000, 0, 0),
MX6_PAD_SD1_CMD__GPIO_1_18 = IOMUX_PAD(0x06C8, 0x02E0, 5, 0x0000, 0, 0),
- MX6_PAD_SD1_DAT3__GPIO_1_21 = IOMUX_PAD(0x06D8, 0x02F0, 5, 0x0000, 0, 0),
+ MX6_PAD_SD1_CMD__ANATOP_ANATOP_TESTO_5 = IOMUX_PAD(0x06C8, 0x02E0, 7, 0x0000, 0, 0),
MX6_PAD_SD1_DAT0__USDHC1_DAT0 = IOMUX_PAD(0x06CC, 0x02E4, 0, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT0__CAAM_WRAPPER_RNG_OSC_OBS = IOMUX_PAD(0x06CC, 0x02E4, 2, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT0__GPT_CAPIN1 = IOMUX_PAD(0x06CC, 0x02E4, 3, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT0__PCIE_CTRL_DIAG_STATUS_BUS_MUX_8 = IOMUX_PAD(0x06CC, 0x02E4, 4, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT0__GPIO_1_16 = IOMUX_PAD(0x06CC, 0x02E4, 5, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT0__HDMI_TX_OPHYDTB_1 = IOMUX_PAD(0x06CC, 0x02E4, 6, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT0__ANATOP_ANATOP_TESTO_7 = IOMUX_PAD(0x06CC, 0x02E4, 7, 0x0000, 0, 0),
MX6_PAD_SD1_DAT1__USDHC1_DAT1 = IOMUX_PAD(0x06D0, 0x02E8, 0, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT1__PWM3_PWMO = IOMUX_PAD(0x06D0, 0x02E8, 2, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT1__GPT_CAPIN2 = IOMUX_PAD(0x06D0, 0x02E8, 3, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT1__PCIE_CTRL_DIAG_STATUS_BUS_MUX_7 = IOMUX_PAD(0x06D0, 0x02E8, 4, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT1__GPIO_1_17 = IOMUX_PAD(0x06D0, 0x02E8, 5, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT1__HDMI_TX_OPHYDTB_0 = IOMUX_PAD(0x06D0, 0x02E8, 6, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT1__ANATOP_ANATOP_TESTO_8 = IOMUX_PAD(0x06D0, 0x02E8, 7, 0x0000, 0, 0),
MX6_PAD_SD1_DAT2__USDHC1_DAT2 = IOMUX_PAD(0x06D4, 0x02EC, 0, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT2__GPT_CMPOUT2 = IOMUX_PAD(0x06D4, 0x02EC, 2, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT2__PWM2_PWMO = IOMUX_PAD(0x06D4, 0x02EC, 3, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT2__WDOG1_WDOG_B = IOMUX_PAD(0x06D4, 0x02EC, 4, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT2__GPIO_1_19 = IOMUX_PAD(0x06D4, 0x02EC, 5, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT2__WDOG1_WDOG_RST_B_DEB = IOMUX_PAD(0x06D4, 0x02EC, 6, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT2__ANATOP_ANATOP_TESTO_4 = IOMUX_PAD(0x06D4, 0x02EC, 7, 0x0000, 0, 0),
MX6_PAD_SD1_DAT3__USDHC1_DAT3 = IOMUX_PAD(0x06D8, 0x02F0, 0, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT3__GPT_CMPOUT3 = IOMUX_PAD(0x06D8, 0x02F0, 2, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT3__PWM1_PWMO = IOMUX_PAD(0x06D8, 0x02F0, 3, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT3__WDOG2_WDOG_B = IOMUX_PAD(0x06D8, 0x02F0, 4, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT3__GPIO_1_21 = IOMUX_PAD(0x06D8, 0x02F0, 5, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT3__WDOG2_WDOG_RST_B_DEB = IOMUX_PAD(0x06D8, 0x02F0, 6, 0x0000, 0, 0),
+ MX6_PAD_SD1_DAT3__ANATOP_ANATOP_TESTO_6 = IOMUX_PAD(0x06D8, 0x02F0, 7, 0x0000, 0, 0),
+ MX6_PAD_SD2_CLK__USDHC2_CLK = IOMUX_PAD(0x06DC, 0x02F4, 0, 0x0930, 1, 0),
+ MX6_PAD_SD2_CLK__KPP_COL_5 = IOMUX_PAD(0x06DC, 0x02F4, 2, 0x08C0, 3, 0),
+ MX6_PAD_SD2_CLK__AUDMUX_AUD4_RXFS = IOMUX_PAD(0x06DC, 0x02F4, 3, 0x07A4, 1, 0),
+ MX6_PAD_SD2_CLK__PCIE_CTRL_DIAG_STATUS_BUS_MUX_9 = IOMUX_PAD(0x06DC, 0x02F4, 4, 0x0000, 0, 0),
+ MX6_PAD_SD2_CLK__GPIO_1_10 = IOMUX_PAD(0x06DC, 0x02F4, 5, 0x0000, 0, 0),
+ MX6_PAD_SD2_CLK__PHY_DTB_1 = IOMUX_PAD(0x06DC, 0x02F4, 6, 0x0000, 0, 0),
+ MX6_PAD_SD2_CMD__USDHC2_CMD = IOMUX_PAD(0x06E0, 0x02F8, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0),
+ MX6_PAD_SD2_CMD__KPP_ROW_5 = IOMUX_PAD(0x06E0, 0x02F8, 2, 0x08CC, 2, 0),
+ MX6_PAD_SD2_CMD__AUDMUX_AUD4_RXC = IOMUX_PAD(0x06E0, 0x02F8, 3, 0x07A0, 1, 0),
+ MX6_PAD_SD2_CMD__PCIE_CTRL_DIAG_STATUS_BUS_MUX_10 = IOMUX_PAD(0x06E0, 0x02F8, 4, 0x0000, 0, 0),
+ MX6_PAD_SD2_CMD__GPIO_1_11 = IOMUX_PAD(0x06E0, 0x02F8, 5, 0x0000, 0, 0),
+ MX6_PAD_SD2_DAT0__USDHC2_DAT0 = IOMUX_PAD(0x06E4, 0x02FC, 0, 0x0000, 0, 0),
+ MX6_PAD_SD2_DAT0__AUDMUX_AUD4_RXD = IOMUX_PAD(0x06E4, 0x02FC, 3, 0x0798, 1, 0),
+ MX6_PAD_SD2_DAT0__KPP_ROW_7 = IOMUX_PAD(0x06E4, 0x02FC, 4, 0x08D4, 2, 0),
+ MX6_PAD_SD2_DAT0__GPIO_1_15 = IOMUX_PAD(0x06E4, 0x02FC, 5, 0x0000, 0, 0),
+ MX6_PAD_SD2_DAT0__DCIC2_DCIC_OUT = IOMUX_PAD(0x06E4, 0x02FC, 6, 0x0000, 0, 0),
+ MX6_PAD_SD2_DAT0__ANATOP_ANATOP_TESTO_2 = IOMUX_PAD(0x06E4, 0x02FC, 7, 0x0000, 0, 0),
+ MX6_PAD_SD2_DAT1__USDHC2_DAT1 = IOMUX_PAD(0x06E8, 0x0300, 0, 0x0000, 0, 0),
+ MX6_PAD_SD2_DAT1__WEIM_WEIM_CS_2 = IOMUX_PAD(0x06E8, 0x0300, 2, 0x0000, 0, 0),
+ MX6_PAD_SD2_DAT1__AUDMUX_AUD4_TXFS = IOMUX_PAD(0x06E8, 0x0300, 3, 0x07AC, 1, 0),
+ MX6_PAD_SD2_DAT1__KPP_COL_7 = IOMUX_PAD(0x06E8, 0x0300, 4, 0x08C8, 2, 0),
+ MX6_PAD_SD2_DAT1__GPIO_1_14 = IOMUX_PAD(0x06E8, 0x0300, 5, 0x0000, 0, 0),
+ MX6_PAD_SD2_DAT1__CCM_WAIT = IOMUX_PAD(0x06E8, 0x0300, 6, 0x0000, 0, 0),
+ MX6_PAD_SD2_DAT1__ANATOP_ANATOP_TESTO_0 = IOMUX_PAD(0x06E8, 0x0300, 7, 0x0000, 0, 0),
+ MX6_PAD_SD2_DAT2__USDHC2_DAT2 = IOMUX_PAD(0x06EC, 0x0304, 0, 0x0000, 0, 0),
+ MX6_PAD_SD2_DAT2__WEIM_WEIM_CS_3 = IOMUX_PAD(0x06EC, 0x0304, 2, 0x0000, 0, 0),
+ MX6_PAD_SD2_DAT2__AUDMUX_AUD4_TXD = IOMUX_PAD(0x06EC, 0x0304, 3, 0x079C, 1, 0),
+ MX6_PAD_SD2_DAT2__KPP_ROW_6 = IOMUX_PAD(0x06EC, 0x0304, 4, 0x08D0, 2, 0),
+ MX6_PAD_SD2_DAT2__GPIO_1_13 = IOMUX_PAD(0x06EC, 0x0304, 5, 0x0000, 0, 0),
+ MX6_PAD_SD2_DAT2__CCM_STOP = IOMUX_PAD(0x06EC, 0x0304, 6, 0x0000, 0, 0),
+ MX6_PAD_SD2_DAT2__ANATOP_ANATOP_TESTO_1 = IOMUX_PAD(0x06EC, 0x0304, 7, 0x0000, 0, 0),
+ MX6_PAD_SD2_DAT3__USDHC2_DAT3 = IOMUX_PAD(0x06F0, 0x0308, 0, 0x0000, 0, 0),
+ MX6_PAD_SD2_DAT3__KPP_COL_6 = IOMUX_PAD(0x06F0, 0x0308, 2, 0x08C4, 2, 0),
+ MX6_PAD_SD2_DAT3__AUDMUX_AUD4_TXC = IOMUX_PAD(0x06F0, 0x0308, 3, 0x07A8, 1, 0),
+ MX6_PAD_SD2_DAT3__PCIE_CTRL_DIAG_STATUS_BUS_MUX_11 = IOMUX_PAD(0x06F0, 0x0308, 4, 0x0000, 0, 0),
+ MX6_PAD_SD2_DAT3__GPIO_1_12 = IOMUX_PAD(0x06F0, 0x0308, 5, 0x0000, 0, 0),
+ MX6_PAD_SD2_DAT3__SJC_DONE = IOMUX_PAD(0x06F0, 0x0308, 6, 0x0000, 0, 0),
+ MX6_PAD_SD2_DAT3__ANATOP_ANATOP_TESTO_3 = IOMUX_PAD(0x06F0, 0x0308, 7, 0x0000, 0, 0),
MX6_PAD_SD3_CLK__USDHC3_CLK = IOMUX_PAD(0x06F4, 0x030C, 0, 0x0934, 1, 0),
+ MX6_PAD_SD3_CLK__UART2_CTS = IOMUX_PAD(0x06F4, 0x030C, 1, 0x0000, 0, 0),
+ MX6_PAD_SD3_CLK__UART2_RTS = IOMUX_PAD(0x06F4, 0x030C, 1, 0x0900, 2, 0),
+ MX6_PAD_SD3_CLK__CAN1_RXCAN = IOMUX_PAD(0x06F4, 0x030C, 2, 0x07C8, 2, 0),
+ MX6_PAD_SD3_CLK__USBOH3_UH3_DFD_OUT_5 = IOMUX_PAD(0x06F4, 0x030C, 3, 0x0000, 0, 0),
+ MX6_PAD_SD3_CLK__USBOH3_UH2_DFD_OUT_5 = IOMUX_PAD(0x06F4, 0x030C, 4, 0x0000, 0, 0),
+ MX6_PAD_SD3_CLK__GPIO_7_3 = IOMUX_PAD(0x06F4, 0x030C, 5, 0x0000, 0, 0),
+ MX6_PAD_SD3_CLK__MIPI_CORE_DPHY_TEST_IN_17 = IOMUX_PAD(0x06F4, 0x030C, 6, 0x0000, 0, 0),
+ MX6_PAD_SD3_CLK__ANATOP_ANATOP_TESTO_14 = IOMUX_PAD(0x06F4, 0x030C, 7, 0x0000, 0, 0),
MX6_PAD_SD3_CMD__USDHC3_CMD = IOMUX_PAD(0x06F8, 0x0310, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0),
+ MX6_PAD_SD3_CMD__UART2_CTS = IOMUX_PAD(0x06F8, 0x0310, 1, 0x0000, 0, 0),
+ MX6_PAD_SD3_CMD__UART2_RTS = IOMUX_PAD(0x06F8, 0x0310, 1, 0x0900, 3, 0),
+ MX6_PAD_SD3_CMD__CAN1_TXCAN = IOMUX_PAD(0x06F8, 0x0310, 2, 0x0000, 0, 0),
+ MX6_PAD_SD3_CMD__USBOH3_UH3_DFD_OUT_4 = IOMUX_PAD(0x06F8, 0x0310, 3, 0x0000, 0, 0),
+ MX6_PAD_SD3_CMD__USBOH3_UH2_DFD_OUT_4 = IOMUX_PAD(0x06F8, 0x0310, 4, 0x0000, 0, 0),
+ MX6_PAD_SD3_CMD__GPIO_7_2 = IOMUX_PAD(0x06F8, 0x0310, 5, 0x0000, 0, 0),
+ MX6_PAD_SD3_CMD__MIPI_CORE_DPHY_TEST_IN_16 = IOMUX_PAD(0x06F8, 0x0310, 6, 0x0000, 0, 0),
+ MX6_PAD_SD3_CMD__ANATOP_ANATOP_TESTO_13 = IOMUX_PAD(0x06F8, 0x0310, 7, 0x0000, 0, 0),
MX6_PAD_SD3_DAT0__USDHC3_DAT0 = IOMUX_PAD(0x06FC, 0x0314, 0, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT0__UART1_CTS = IOMUX_PAD(0x06FC, 0x0314, 1, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT0__UART1_RTS = IOMUX_PAD(0x06FC, 0x0314, 1, 0x08F8, 2, 0),
+ MX6_PAD_SD3_DAT0__CAN2_TXCAN = IOMUX_PAD(0x06FC, 0x0314, 2, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT0__USBOH3_UH3_DFD_OUT_6 = IOMUX_PAD(0x06FC, 0x0314, 3, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT0__USBOH3_UH2_DFD_OUT_6 = IOMUX_PAD(0x06FC, 0x0314, 4, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT0__GPIO_7_4 = IOMUX_PAD(0x06FC, 0x0314, 5, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT0__MIPI_CORE_DPHY_TEST_IN_18 = IOMUX_PAD(0x06FC, 0x0314, 6, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT0__ANATOP_ANATOP_TESTO_15 = IOMUX_PAD(0x06FC, 0x0314, 7, 0x0000, 0, 0),
MX6_PAD_SD3_DAT1__USDHC3_DAT1 = IOMUX_PAD(0x0700, 0x0318, 0, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT1__UART1_CTS = IOMUX_PAD(0x0700, 0x0318, 1, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT1__UART1_RTS = IOMUX_PAD(0x0700, 0x0318, 1, 0x08F8, 3, 0),
+ MX6_PAD_SD3_DAT1__CAN2_RXCAN = IOMUX_PAD(0x0700, 0x0318, 2, 0x07CC, 1, 0),
+ MX6_PAD_SD3_DAT1__USBOH3_UH3_DFD_OUT_7 = IOMUX_PAD(0x0700, 0x0318, 3, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT1__USBOH3_UH2_DFD_OUT_7 = IOMUX_PAD(0x0700, 0x0318, 4, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT1__GPIO_7_5 = IOMUX_PAD(0x0700, 0x0318, 5, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT1__MIPI_CORE_DPHY_TEST_IN_19 = IOMUX_PAD(0x0700, 0x0318, 6, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT1__ANATOP_ANATOP_TESTI_0 = IOMUX_PAD(0x0700, 0x0318, 7, 0x0000, 0, 0),
MX6_PAD_SD3_DAT2__USDHC3_DAT2 = IOMUX_PAD(0x0704, 0x031C, 0, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT2__PCIE_CTRL_DIAG_STATUS_BUS_MUX_28 = IOMUX_PAD(0x0704, 0x031C, 2, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT2__USBOH3_UH3_DFD_OUT_8 = IOMUX_PAD(0x0704, 0x031C, 3, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT2__USBOH3_UH2_DFD_OUT_8 = IOMUX_PAD(0x0704, 0x031C, 4, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT2__GPIO_7_6 = IOMUX_PAD(0x0704, 0x031C, 5, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT2__MIPI_CORE_DPHY_TEST_IN_20 = IOMUX_PAD(0x0704, 0x031C, 6, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT2__ANATOP_ANATOP_TESTI_1 = IOMUX_PAD(0x0704, 0x031C, 7, 0x0000, 0, 0),
MX6_PAD_SD3_DAT3__USDHC3_DAT3 = IOMUX_PAD(0x0708, 0x0320, 0, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT3__UART3_CTS = IOMUX_PAD(0x0708, 0x0320, 1, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT3__UART3_RTS = IOMUX_PAD(0x0708, 0x0320, 1, 0x0908, 4, 0),
+ MX6_PAD_SD3_DAT3__PCIE_CTRL_DIAG_STATUS_BUS_MUX_29 = IOMUX_PAD(0x0708, 0x0320, 2, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT3__USBOH3_UH3_DFD_OUT_9 = IOMUX_PAD(0x0708, 0x0320, 3, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT3__USBOH3_UH2_DFD_OUT_9 = IOMUX_PAD(0x0708, 0x0320, 4, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT3__GPIO_7_7 = IOMUX_PAD(0x0708, 0x0320, 5, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT3__MIPI_CORE_DPHY_TEST_IN_21 = IOMUX_PAD(0x0708, 0x0320, 6, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT3__ANATOP_ANATOP_TESTI_2 = IOMUX_PAD(0x0708, 0x0320, 7, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT4__USDHC3_DAT4 = IOMUX_PAD(0x070C, 0x0324, 0, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT4__UART2_TXD = IOMUX_PAD(0x070C, 0x0324, 1, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT4__UART2_RXD = IOMUX_PAD(0x070C, 0x0324, 1, 0x0904, 4, 0),
+ MX6_PAD_SD3_DAT4__PCIE_CTRL_DIAG_STATUS_BUS_MUX_27 = IOMUX_PAD(0x070C, 0x0324, 2, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT4__USBOH3_UH3_DFD_OUT_3 = IOMUX_PAD(0x070C, 0x0324, 3, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT4__USBOH3_UH2_DFD_OUT_3 = IOMUX_PAD(0x070C, 0x0324, 4, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT4__GPIO_7_1 = IOMUX_PAD(0x070C, 0x0324, 5, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT4__MIPI_CORE_DPHY_TEST_IN_15 = IOMUX_PAD(0x070C, 0x0324, 6, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT4__ANATOP_ANATOP_TESTO_12 = IOMUX_PAD(0x070C, 0x0324, 7, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT5__USDHC3_DAT5 = IOMUX_PAD(0x0710, 0x0328, 0, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT5__UART2_TXD = IOMUX_PAD(0x0710, 0x0328, 1, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT5__UART2_RXD = IOMUX_PAD(0x0710, 0x0328, 1, 0x0904, 5, 0),
+ MX6_PAD_SD3_DAT5__PCIE_CTRL_DIAG_STATUS_BUS_MUX_26 = IOMUX_PAD(0x0710, 0x0328, 2, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT5__USBOH3_UH3_DFD_OUT_2 = IOMUX_PAD(0x0710, 0x0328, 3, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT5__USBOH3_UH2_DFD_OUT_2 = IOMUX_PAD(0x0710, 0x0328, 4, 0x0000, 0, 0),
MX6_PAD_SD3_DAT5__GPIO_7_0 = IOMUX_PAD(0x0710, 0x0328, 5, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT5__MIPI_CORE_DPHY_TEST_IN_14 = IOMUX_PAD(0x0710, 0x0328, 6, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT5__ANATOP_ANATOP_TESTO_11 = IOMUX_PAD(0x0710, 0x0328, 7, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT6__USDHC3_DAT6 = IOMUX_PAD(0x0714, 0x032C, 0, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT6__UART1_TXD = IOMUX_PAD(0x0714, 0x032C, 1, 0x0000, 0, 0),
MX6_PAD_SD3_DAT6__UART1_RXD = IOMUX_PAD(0x0714, 0x032C, 1, 0x08FC, 2, 0),
+ MX6_PAD_SD3_DAT6__PCIE_CTRL_DIAG_STATUS_BUS_MUX_25 = IOMUX_PAD(0x0714, 0x032C, 2, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT6__USBOH3_UH3_DFD_OUT_1 = IOMUX_PAD(0x0714, 0x032C, 3, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT6__USBOH3_UH2_DFD_OUT_1 = IOMUX_PAD(0x0714, 0x032C, 4, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT6__GPIO_6_18 = IOMUX_PAD(0x0714, 0x032C, 5, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT6__MIPI_CORE_DPHY_TEST_IN_13 = IOMUX_PAD(0x0714, 0x032C, 6, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT6__ANATOP_ANATOP_TESTO_10 = IOMUX_PAD(0x0714, 0x032C, 7, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT7__USDHC3_DAT7 = IOMUX_PAD(0x0718, 0x0330, 0, 0x0000, 0, 0),
MX6_PAD_SD3_DAT7__UART1_TXD = IOMUX_PAD(0x0718, 0x0330, 1, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT7__UART1_RXD = IOMUX_PAD(0x0718, 0x0330, 1, 0x08FC, 3, 0),
+ MX6_PAD_SD3_DAT7__PCIE_CTRL_DIAG_STATUS_BUS_MUX_24 = IOMUX_PAD(0x0718, 0x0330, 2, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT7__USBOH3_UH3_DFD_OUT_0 = IOMUX_PAD(0x0718, 0x0330, 3, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT7__USBOH3_UH2_DFD_OUT_0 = IOMUX_PAD(0x0718, 0x0330, 4, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT7__GPIO_6_17 = IOMUX_PAD(0x0718, 0x0330, 5, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT7__MIPI_CORE_DPHY_TEST_IN_12 = IOMUX_PAD(0x0718, 0x0330, 6, 0x0000, 0, 0),
+ MX6_PAD_SD3_DAT7__ANATOP_USBPHY2_TSTO_PLL_CLK20DIV = IOMUX_PAD(0x0718, 0x0330, 7, 0x0000, 0, 0),
+ MX6_PAD_SD3_RST__USDHC3_RST = IOMUX_PAD(0x071C, 0x0334, 0, 0x0000, 0, 0),
+ MX6_PAD_SD3_RST__UART3_CTS = IOMUX_PAD(0x071C, 0x0334, 1, 0x0000, 0, 0),
+ MX6_PAD_SD3_RST__UART3_RTS = IOMUX_PAD(0x071C, 0x0334, 1, 0x0908, 5, 0),
+ MX6_PAD_SD3_RST__PCIE_CTRL_DIAG_STATUS_BUS_MUX_30 = IOMUX_PAD(0x071C, 0x0334, 2, 0x0000, 0, 0),
+ MX6_PAD_SD3_RST__USBOH3_UH3_DFD_OUT_10 = IOMUX_PAD(0x071C, 0x0334, 3, 0x0000, 0, 0),
+ MX6_PAD_SD3_RST__USBOH3_UH2_DFD_OUT_10 = IOMUX_PAD(0x071C, 0x0334, 4, 0x0000, 0, 0),
+ MX6_PAD_SD3_RST__GPIO_7_8 = IOMUX_PAD(0x071C, 0x0334, 5, 0x0000, 0, 0),
+ MX6_PAD_SD3_RST__MIPI_CORE_DPHY_TEST_IN_22 = IOMUX_PAD(0x071C, 0x0334, 6, 0x0000, 0, 0),
+ MX6_PAD_SD3_RST__ANATOP_ANATOP_TESTI_3 = IOMUX_PAD(0x071C, 0x0334, 7, 0x0000, 0, 0),
MX6_PAD_SD4_CLK__USDHC4_CLK = IOMUX_PAD(0x0720, 0x0338, 0, 0x0938, 1, 0),
+ MX6_PAD_SD4_CLK__RAWNAND_WRN = IOMUX_PAD(0x0720, 0x0338, 1, 0x0000, 0, 0),
+ MX6_PAD_SD4_CLK__UART3_TXD = IOMUX_PAD(0x0720, 0x0338, 2, 0x0000, 0, 0),
+ MX6_PAD_SD4_CLK__UART3_RXD = IOMUX_PAD(0x0720, 0x0338, 2, 0x090C, 2, 0),
+ MX6_PAD_SD4_CLK__PCIE_CTRL_DIAG_STATUS_BUS_MUX_6 = IOMUX_PAD(0x0720, 0x0338, 4, 0x0000, 0, 0),
+ MX6_PAD_SD4_CLK__GPIO_7_10 = IOMUX_PAD(0x0720, 0x0338, 5, 0x0000, 0, 0),
MX6_PAD_SD4_CMD__USDHC4_CMD = IOMUX_PAD(0x0724, 0x033C, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0),
+ MX6_PAD_SD4_CMD__RAWNAND_RDN = IOMUX_PAD(0x0724, 0x033C, 1, 0x0000, 0, 0),
+ MX6_PAD_SD4_CMD__UART3_TXD = IOMUX_PAD(0x0724, 0x033C, 2, 0x0000, 0, 0),
+ MX6_PAD_SD4_CMD__UART3_RXD = IOMUX_PAD(0x0724, 0x033C, 2, 0x090C, 3, 0),
+ MX6_PAD_SD4_CMD__PCIE_CTRL_DIAG_STATUS_BUS_MUX_5 = IOMUX_PAD(0x0724, 0x033C, 4, 0x0000, 0, 0),
+ MX6_PAD_SD4_CMD__GPIO_7_9 = IOMUX_PAD(0x0724, 0x033C, 5, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT0__RAWNAND_D8 = IOMUX_PAD(0x0728, 0x0340, 0, 0x0000, 0, 0),
MX6_PAD_SD4_DAT0__USDHC4_DAT0 = IOMUX_PAD(0x0728, 0x0340, 1, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT0__RAWNAND_DQS = IOMUX_PAD(0x0728, 0x0340, 2, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT0__USBOH3_UH2_DFD_OUT_24 = IOMUX_PAD(0x0728, 0x0340, 3, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT0__USBOH3_UH3_DFD_OUT_24 = IOMUX_PAD(0x0728, 0x0340, 4, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT0__GPIO_2_8 = IOMUX_PAD(0x0728, 0x0340, 5, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT0__IPU1_IPU_DIAG_BUS_8 = IOMUX_PAD(0x0728, 0x0340, 6, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT1__RAWNAND_D9 = IOMUX_PAD(0x072C, 0x0344, 0, 0x0000, 0, 0),
MX6_PAD_SD4_DAT1__USDHC4_DAT1 = IOMUX_PAD(0x072C, 0x0344, 1, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT1__PWM3_PWMO = IOMUX_PAD(0x072C, 0x0344, 2, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT1__USBOH3_UH2_DFD_OUT_25 = IOMUX_PAD(0x072C, 0x0344, 3, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT1__USBOH3_UH3_DFD_OUT_25 = IOMUX_PAD(0x072C, 0x0344, 4, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT1__GPIO_2_9 = IOMUX_PAD(0x072C, 0x0344, 5, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT1__IPU1_IPU_DIAG_BUS_9 = IOMUX_PAD(0x072C, 0x0344, 6, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT2__RAWNAND_D10 = IOMUX_PAD(0x0730, 0x0348, 0, 0x0000, 0, 0),
MX6_PAD_SD4_DAT2__USDHC4_DAT2 = IOMUX_PAD(0x0730, 0x0348, 1, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT2__PWM4_PWMO = IOMUX_PAD(0x0730, 0x0348, 2, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT2__USBOH3_UH2_DFD_OUT_26 = IOMUX_PAD(0x0730, 0x0348, 3, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT2__USBOH3_UH3_DFD_OUT_26 = IOMUX_PAD(0x0730, 0x0348, 4, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT2__GPIO_2_10 = IOMUX_PAD(0x0730, 0x0348, 5, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT2__IPU1_IPU_DIAG_BUS_10 = IOMUX_PAD(0x0730, 0x0348, 6, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT3__RAWNAND_D11 = IOMUX_PAD(0x0734, 0x034C, 0, 0x0000, 0, 0),
MX6_PAD_SD4_DAT3__USDHC4_DAT3 = IOMUX_PAD(0x0734, 0x034C, 1, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT3__USBOH3_UH2_DFD_OUT_27 = IOMUX_PAD(0x0734, 0x034C, 3, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT3__USBOH3_UH3_DFD_OUT_27 = IOMUX_PAD(0x0734, 0x034C, 4, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT3__GPIO_2_11 = IOMUX_PAD(0x0734, 0x034C, 5, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT3__IPU1_IPU_DIAG_BUS_11 = IOMUX_PAD(0x0734, 0x034C, 6, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT4__RAWNAND_D12 = IOMUX_PAD(0x0738, 0x0350, 0, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT4__USDHC4_DAT4 = IOMUX_PAD(0x0738, 0x0350, 1, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT4__UART2_TXD = IOMUX_PAD(0x0738, 0x0350, 2, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT4__UART2_RXD = IOMUX_PAD(0x0738, 0x0350, 2, 0x0904, 6, 0),
+ MX6_PAD_SD4_DAT4__USBOH3_UH2_DFD_OUT_28 = IOMUX_PAD(0x0738, 0x0350, 3, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT4__USBOH3_UH3_DFD_OUT_28 = IOMUX_PAD(0x0738, 0x0350, 4, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT4__GPIO_2_12 = IOMUX_PAD(0x0738, 0x0350, 5, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT4__IPU1_IPU_DIAG_BUS_12 = IOMUX_PAD(0x0738, 0x0350, 6, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT5__RAWNAND_D13 = IOMUX_PAD(0x073C, 0x0354, 0, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT5__USDHC4_DAT5 = IOMUX_PAD(0x073C, 0x0354, 1, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT5__UART2_CTS = IOMUX_PAD(0x073C, 0x0354, 2, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT5__UART2_RTS = IOMUX_PAD(0x073C, 0x0354, 2, 0x0900, 4, 0),
+ MX6_PAD_SD4_DAT5__USBOH3_UH2_DFD_OUT_29 = IOMUX_PAD(0x073C, 0x0354, 3, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT5__USBOH3_UH3_DFD_OUT_29 = IOMUX_PAD(0x073C, 0x0354, 4, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT5__GPIO_2_13 = IOMUX_PAD(0x073C, 0x0354, 5, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT5__IPU1_IPU_DIAG_BUS_13 = IOMUX_PAD(0x073C, 0x0354, 6, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT6__RAWNAND_D14 = IOMUX_PAD(0x0740, 0x0358, 0, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT6__USDHC4_DAT6 = IOMUX_PAD(0x0740, 0x0358, 1, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT6__UART2_CTS = IOMUX_PAD(0x0740, 0x0358, 2, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT6__UART2_RTS = IOMUX_PAD(0x0740, 0x0358, 2, 0x0900, 5, 0),
+ MX6_PAD_SD4_DAT6__USBOH3_UH2_DFD_OUT_30 = IOMUX_PAD(0x0740, 0x0358, 3, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT6__USBOH3_UH3_DFD_OUT_30 = IOMUX_PAD(0x0740, 0x0358, 4, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT6__GPIO_2_14 = IOMUX_PAD(0x0740, 0x0358, 5, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT6__IPU1_IPU_DIAG_BUS_14 = IOMUX_PAD(0x0740, 0x0358, 6, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT7__RAWNAND_D15 = IOMUX_PAD(0x0744, 0x035C, 0, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT7__USDHC4_DAT7 = IOMUX_PAD(0x0744, 0x035C, 1, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT7__UART2_TXD = IOMUX_PAD(0x0744, 0x035C, 2, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT7__UART2_RXD = IOMUX_PAD(0x0744, 0x035C, 2, 0x0904, 7, 0),
+ MX6_PAD_SD4_DAT7__USBOH3_UH2_DFD_OUT_31 = IOMUX_PAD(0x0744, 0x035C, 3, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT7__USBOH3_UH3_DFD_OUT_31 = IOMUX_PAD(0x0744, 0x035C, 4, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT7__GPIO_2_15 = IOMUX_PAD(0x0744, 0x035C, 5, 0x0000, 0, 0),
+ MX6_PAD_SD4_DAT7__IPU1_IPU_DIAG_BUS_15 = IOMUX_PAD(0x0744, 0x035C, 6, 0x0000, 0, 0),
};
#endif /* __ASM_ARCH_MX6_MX6DL_PINS_H__ */
diff --git a/arch/arm/include/asm/arch-omap3/gpio.h b/arch/arm/include/asm/arch-omap3/gpio.h
index 8bba3b0..d72f5e5 100644
--- a/arch/arm/include/asm/arch-omap3/gpio.h
+++ b/arch/arm/include/asm/arch-omap3/gpio.h
@@ -40,6 +40,8 @@
#include <asm/omap_gpio.h>
+#define OMAP_MAX_GPIO 192
+
#define OMAP34XX_GPIO1_BASE 0x48310000
#define OMAP34XX_GPIO2_BASE 0x49050000
#define OMAP34XX_GPIO3_BASE 0x49052000
diff --git a/arch/arm/include/asm/arch-omap4/gpio.h b/arch/arm/include/asm/arch-omap4/gpio.h
index 26f19d1..fdf65ed 100644
--- a/arch/arm/include/asm/arch-omap4/gpio.h
+++ b/arch/arm/include/asm/arch-omap4/gpio.h
@@ -40,6 +40,8 @@
#include <asm/omap_gpio.h>
+#define OMAP_MAX_GPIO 192
+
#define OMAP44XX_GPIO1_BASE 0x4A310000
#define OMAP44XX_GPIO2_BASE 0x48055000
#define OMAP44XX_GPIO3_BASE 0x48057000
diff --git a/arch/arm/include/asm/arch-omap5/gpio.h b/arch/arm/include/asm/arch-omap5/gpio.h
index c14dff0..7c82f90 100644
--- a/arch/arm/include/asm/arch-omap5/gpio.h
+++ b/arch/arm/include/asm/arch-omap5/gpio.h
@@ -40,11 +40,15 @@
#include <asm/omap_gpio.h>
+#define OMAP_MAX_GPIO 256
+
#define OMAP54XX_GPIO1_BASE 0x4Ae10000
#define OMAP54XX_GPIO2_BASE 0x48055000
#define OMAP54XX_GPIO3_BASE 0x48057000
#define OMAP54XX_GPIO4_BASE 0x48059000
#define OMAP54XX_GPIO5_BASE 0x4805B000
#define OMAP54XX_GPIO6_BASE 0x4805D000
+#define OMAP54XX_GPIO7_BASE 0x48051000
+#define OMAP54XX_GPIO8_BASE 0x48053000
#endif /* _GPIO_OMAP5_H */
diff --git a/arch/arm/include/asm/arch-tegra/clk_rst.h b/arch/arm/include/asm/arch-tegra/clk_rst.h
index c754ec7..9b8de9c 100644
--- a/arch/arm/include/asm/arch-tegra/clk_rst.h
+++ b/arch/arm/include/asm/arch-tegra/clk_rst.h
@@ -225,6 +225,16 @@
IN_408_OUT_9_6_DIVISOR = 83,
};
+/* CLK_RST_CONTROLLER_UTMIP_PLL_CFG1_0 */
+#define PLLU_POWERDOWN (1 << 16)
+#define PLL_ENABLE_POWERDOWN (1 << 14)
+#define PLL_ACTIVE_POWERDOWN (1 << 12)
+
+/* CLK_RST_CONTROLLER_UTMIP_PLL_CFG2_0 */
+#define UTMIP_FORCE_PD_SAMP_C_POWERDOWN (1 << 4)
+#define UTMIP_FORCE_PD_SAMP_B_POWERDOWN (1 << 2)
+#define UTMIP_FORCE_PD_SAMP_A_POWERDOWN (1 << 0)
+
/* CLK_RST_CONTROLLER_OSC_CTRL_0 */
#define OSC_XOBP_SHIFT 1
#define OSC_XOBP_MASK (1U << OSC_XOBP_SHIFT)
diff --git a/arch/arm/include/asm/arch-tegra/usb.h b/arch/arm/include/asm/arch-tegra/usb.h
index ef6c089..cefe0d2 100644
--- a/arch/arm/include/asm/arch-tegra/usb.h
+++ b/arch/arm/include/asm/arch-tegra/usb.h
@@ -1,5 +1,6 @@
/*
* Copyright (c) 2011 The Chromium OS Authors.
+ * Copyright (c) 2013 NVIDIA Corporation
* See file CREDITS for list of people who contributed to this
* project.
*
@@ -22,120 +23,6 @@
#ifndef _TEGRA_USB_H_
#define _TEGRA_USB_H_
-
-/* USB Controller (USBx_CONTROLLER_) regs */
-struct usb_ctlr {
- /* 0x000 */
- uint id;
- uint reserved0;
- uint host;
- uint device;
-
- /* 0x010 */
- uint txbuf;
- uint rxbuf;
- uint reserved1[2];
-
- /* 0x020 */
- uint reserved2[56];
-
- /* 0x100 */
- u16 cap_length;
- u16 hci_version;
- uint hcs_params;
- uint hcc_params;
- uint reserved3[5];
-
- /* 0x120 */
- uint dci_version;
- uint dcc_params;
- uint reserved4[6];
-
- /* 0x140 */
- uint usb_cmd;
- uint usb_sts;
- uint usb_intr;
- uint frindex;
-
- /* 0x150 */
- uint reserved5;
- uint periodic_list_base;
- uint async_list_addr;
- uint async_tt_sts;
-
- /* 0x160 */
- uint burst_size;
- uint tx_fill_tuning;
- uint reserved6; /* is this port_sc1 on some controllers? */
- uint icusb_ctrl;
-
- /* 0x170 */
- uint ulpi_viewport;
- uint reserved7;
- uint endpt_nak;
- uint endpt_nak_enable;
-
- /* 0x180 */
- uint reserved;
- uint port_sc1;
- uint reserved8[6];
-
- /* 0x1a0 */
- uint reserved9;
- uint otgsc;
- uint usb_mode;
- uint endpt_setup_stat;
-
- /* 0x1b0 */
- uint reserved10[20];
-
- /* 0x200 */
- uint reserved11[0x80];
-
- /* 0x400 */
- uint susp_ctrl;
- uint phy_vbus_sensors;
- uint phy_vbus_wakeup_id;
- uint phy_alt_vbus_sys;
-
- /* 0x410 */
- uint usb1_legacy_ctrl;
- uint reserved12[4];
-
- /* 0x424 */
- uint ulpi_timing_ctrl_0;
- uint ulpi_timing_ctrl_1;
- uint reserved13[53];
-
- /* 0x500 */
- uint reserved14[64 * 3];
-
- /* 0x800 */
- uint utmip_pll_cfg0;
- uint utmip_pll_cfg1;
- uint utmip_xcvr_cfg0;
- uint utmip_bias_cfg0;
-
- /* 0x810 */
- uint utmip_hsrx_cfg0;
- uint utmip_hsrx_cfg1;
- uint utmip_fslsrx_cfg0;
- uint utmip_fslsrx_cfg1;
-
- /* 0x820 */
- uint utmip_tx_cfg0;
- uint utmip_misc_cfg0;
- uint utmip_misc_cfg1;
- uint utmip_debounce_cfg0;
-
- /* 0x830 */
- uint utmip_bat_chrg_cfg0;
- uint utmip_spare_cfg0;
- uint utmip_xcvr_cfg1;
- uint utmip_bias_cfg1;
-};
-
-
/* USB1_LEGACY_CTRL */
#define USB1_NO_LEGACY_MODE 1
@@ -146,25 +33,18 @@
#define VBUS_SENSE_CTL_AB_SESS_VLD 2
#define VBUS_SENSE_CTL_A_SESS_VLD 3
-/* USB2_IF_ULPI_TIMING_CTRL_0 */
-#define ULPI_OUTPUT_PINMUX_BYP (1 << 10)
-#define ULPI_CLKOUT_PINMUX_BYP (1 << 11)
-
-/* USB2_IF_ULPI_TIMING_CTRL_1 */
-#define ULPI_DATA_TRIMMER_LOAD (1 << 0)
-#define ULPI_DATA_TRIMMER_SEL(x) (((x) & 0x7) << 1)
-#define ULPI_STPDIRNXT_TRIMMER_LOAD (1 << 16)
-#define ULPI_STPDIRNXT_TRIMMER_SEL(x) (((x) & 0x7) << 17)
-#define ULPI_DIR_TRIMMER_LOAD (1 << 24)
-#define ULPI_DIR_TRIMMER_SEL(x) (((x) & 0x7) << 25)
-
/* USBx_IF_USB_SUSP_CTRL_0 */
-#define ULPI_PHY_ENB (1 << 13)
#define UTMIP_PHY_ENB (1 << 12)
#define UTMIP_RESET (1 << 11)
#define USB_PHY_CLK_VALID (1 << 7)
#define USB_SUSP_CLR (1 << 5)
+/* USB2_IF_USB_SUSP_CTRL_0 */
+#define ULPI_PHY_ENB (1 << 13)
+
+/* USBx_UTMIP_MISC_CFG0 */
+#define UTMIP_SUSPEND_EXIT_ON_EDGE (1 << 22)
+
/* USBx_UTMIP_MISC_CFG1 */
#define UTMIP_PLLU_STABLE_COUNT_SHIFT 6
#define UTMIP_PLLU_STABLE_COUNT_MASK \
@@ -177,15 +57,28 @@
/* USBx_UTMIP_PLL_CFG1_0 */
#define UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT 27
#define UTMIP_PLLU_ENABLE_DLY_COUNT_MASK \
- (0xf << UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT)
+ (0x1f << UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT)
#define UTMIP_XTAL_FREQ_COUNT_SHIFT 0
#define UTMIP_XTAL_FREQ_COUNT_MASK 0xfff
+/* USBx_UTMIP_BIAS_CFG0_0 */
+#define UTMIP_HSDISCON_LEVEL_MSB (1 << 24)
+#define UTMIP_OTGPD (1 << 11)
+#define UTMIP_BIASPD (1 << 10)
+#define UTMIP_HSDISCON_LEVEL_SHIFT 2
+#define UTMIP_HSDISCON_LEVEL_MASK \
+ (0x3 << UTMIP_HSDISCON_LEVEL_SHIFT)
+#define UTMIP_HSSQUELCH_LEVEL_SHIFT 0
+#define UTMIP_HSSQUELCH_LEVEL_MASK \
+ (0x3 << UTMIP_HSSQUELCH_LEVEL_SHIFT)
+
/* USBx_UTMIP_BIAS_CFG1_0 */
+#define UTMIP_FORCE_PDTRK_POWERDOWN 1
#define UTMIP_BIAS_PDTRK_COUNT_SHIFT 3
#define UTMIP_BIAS_PDTRK_COUNT_MASK \
(0x1f << UTMIP_BIAS_PDTRK_COUNT_SHIFT)
+/* USBx_UTMIP_DEBOUNCE_CFG0_0 */
#define UTMIP_DEBOUNCE_CFG0_SHIFT 0
#define UTMIP_DEBOUNCE_CFG0_MASK 0xffff
@@ -195,9 +88,6 @@
/* USBx_UTMIP_BAT_CHRG_CFG0_0 */
#define UTMIP_PD_CHRG 1
-/* USBx_UTMIP_XCVR_CFG0_0 */
-#define UTMIP_XCVR_LSBIAS_SE (1 << 21)
-
/* USBx_UTMIP_SPARE_CFG0_0 */
#define FUSE_SETUP_SEL (1 << 3)
@@ -208,23 +98,26 @@
#define UTMIP_ELASTIC_LIMIT_MASK \
(0x1f << UTMIP_ELASTIC_LIMIT_SHIFT)
-/* USBx_UTMIP_HSRX_CFG0_1 */
+/* USBx_UTMIP_HSRX_CFG1_0 */
#define UTMIP_HS_SYNC_START_DLY_SHIFT 1
#define UTMIP_HS_SYNC_START_DLY_MASK \
- (0xf << UTMIP_HS_SYNC_START_DLY_SHIFT)
+ (0x1f << UTMIP_HS_SYNC_START_DLY_SHIFT)
/* USBx_CONTROLLER_2_USB2D_ICUSB_CTRL_0 */
#define IC_ENB1 (1 << 3)
-/* SB2_CONTROLLER_2_USB2D_PORTSC1_0 */
-#define PTS_SHIFT 30
-#define PTS_MASK (3U << PTS_SHIFT)
-#define PTS_UTMI 0
-#define PTS_RESERVED 1
-#define PTS_ULPI 2
-#define PTS_ICUSB_SER 3
+/* PORTSC1, USB1, defined for Tegra20 */
+#define PTS1_SHIFT 31
+#define PTS1_MASK (1 << PTS1_SHIFT)
+#define STS1 (1 << 30)
-#define STS (1 << 29)
+#define PTS_UTMI 0
+#define PTS_RESERVED 1
+#define PTS_ULPI 2
+#define PTS_ICUSB_SER 3
+#define PTS_HSIC 4
+
+/* SB2_CONTROLLER_2_USB2D_PORTSC1_0 */
#define WKOC (1 << 22)
#define WKDS (1 << 21)
#define WKCN (1 << 20)
@@ -233,8 +126,19 @@
#define UTMIP_FORCE_PD_POWERDOWN (1 << 14)
#define UTMIP_FORCE_PD2_POWERDOWN (1 << 16)
#define UTMIP_FORCE_PDZI_POWERDOWN (1 << 18)
+#define UTMIP_XCVR_LSBIAS_SE (1 << 21)
+#define UTMIP_XCVR_HSSLEW_MSB_SHIFT 25
+#define UTMIP_XCVR_HSSLEW_MSB_MASK \
+ (0x7f << UTMIP_XCVR_HSSLEW_MSB_SHIFT)
+#define UTMIP_XCVR_SETUP_MSB_SHIFT 22
+#define UTMIP_XCVR_SETUP_MSB_MASK (0x7 << UTMIP_XCVR_SETUP_MSB_SHIFT)
+#define UTMIP_XCVR_SETUP_SHIFT 0
+#define UTMIP_XCVR_SETUP_MASK (0xf << UTMIP_XCVR_SETUP_SHIFT)
/* USBx_UTMIP_XCVR_CFG1_0 */
+#define UTMIP_XCVR_TERM_RANGE_ADJ_SHIFT 18
+#define UTMIP_XCVR_TERM_RANGE_ADJ_MASK \
+ (0xf << UTMIP_XCVR_TERM_RANGE_ADJ_SHIFT)
#define UTMIP_FORCE_PDDISC_POWERDOWN (1 << 0)
#define UTMIP_FORCE_PDCHRP_POWERDOWN (1 << 2)
#define UTMIP_FORCE_PDDR_POWERDOWN (1 << 4)
diff --git a/arch/arm/include/asm/arch-tegra114/usb.h b/arch/arm/include/asm/arch-tegra114/usb.h
new file mode 100644
index 0000000..d46048c
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra114/usb.h
@@ -0,0 +1,156 @@
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * Copyright (c) 2013 NVIDIA Corporation
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _TEGRA114_USB_H_
+#define _TEGRA114_USB_H_
+
+/* USB Controller (USBx_CONTROLLER_) regs */
+struct usb_ctlr {
+ /* 0x000 */
+ uint id;
+ uint reserved0;
+ uint host;
+ uint device;
+
+ /* 0x010 */
+ uint txbuf;
+ uint rxbuf;
+ uint reserved1[2];
+
+ /* 0x020 */
+ uint reserved2[56];
+
+ /* 0x100 */
+ u16 cap_length;
+ u16 hci_version;
+ uint hcs_params;
+ uint hcc_params;
+ uint reserved3[5];
+
+ /* 0x120 */
+ uint dci_version;
+ uint dcc_params;
+ uint reserved4[2];
+
+ /* 0x130 */
+ uint usb_cmd;
+ uint usb_sts;
+ uint usb_intr;
+ uint frindex;
+
+ /* 0x140 */
+ uint reserved5;
+ uint periodic_list_base;
+ uint async_list_addr;
+ uint reserved5_1;
+
+ /* 0x150 */
+ uint burst_size;
+ uint tx_fill_tuning;
+ uint reserved6;
+ uint icusb_ctrl;
+
+ /* 0x160 */
+ uint ulpi_viewport;
+ uint reserved7[3];
+
+ /* 0x170 */
+ uint reserved;
+ uint port_sc1;
+ uint reserved8[6];
+
+ /* 0x190 */
+ uint reserved9[8];
+
+ /* 0x1b0 */
+ uint reserved10;
+ uint hostpc1_devlc;
+ uint reserved10_1[2];
+
+ /* 0x1c0 */
+ uint reserved10_2[4];
+
+ /* 0x1d0 */
+ uint reserved10_3[4];
+
+ /* 0x1e0 */
+ uint reserved10_4[4];
+
+ /* 0x1f0 */
+ uint reserved10_5;
+ uint otgsc;
+ uint usb_mode;
+ uint reserved10_6;
+
+ /* 0x200 */
+ uint endpt_nak;
+ uint endpt_nak_enable;
+ uint endpt_setup_stat;
+ uint reserved11_1[0x7D];
+
+ /* 0x400 */
+ uint susp_ctrl;
+ uint phy_vbus_sensors;
+ uint phy_vbus_wakeup_id;
+ uint phy_alt_vbus_sys;
+
+ /* 0x410 */
+ uint usb1_legacy_ctrl;
+ uint reserved12[3];
+
+ /* 0x420 */
+ uint reserved13[56];
+
+ /* 0x500 */
+ uint reserved14[64 * 3];
+
+ /* 0x800 */
+ uint utmip_pll_cfg0;
+ uint utmip_pll_cfg1;
+ uint utmip_xcvr_cfg0;
+ uint utmip_bias_cfg0;
+
+ /* 0x810 */
+ uint utmip_hsrx_cfg0;
+ uint utmip_hsrx_cfg1;
+ uint utmip_fslsrx_cfg0;
+ uint utmip_fslsrx_cfg1;
+
+ /* 0x820 */
+ uint utmip_tx_cfg0;
+ uint utmip_misc_cfg0;
+ uint utmip_misc_cfg1;
+ uint utmip_debounce_cfg0;
+
+ /* 0x830 */
+ uint utmip_bat_chrg_cfg0;
+ uint utmip_spare_cfg0;
+ uint utmip_xcvr_cfg1;
+ uint utmip_bias_cfg1;
+};
+
+/* USB2D_HOSTPC1_DEVLC_0 */
+#define PTS_SHIFT 29
+#define PTS_MASK (0x7U << PTS_SHIFT)
+
+#define STS (1 << 28)
+#endif /* _TEGRA114_USB_H_ */
diff --git a/arch/arm/include/asm/arch-tegra20/usb.h b/arch/arm/include/asm/arch-tegra20/usb.h
new file mode 100644
index 0000000..3d94cc7
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra20/usb.h
@@ -0,0 +1,155 @@
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * Copyright (c) 2013 NVIDIA Corporation
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _TEGRA20_USB_H_
+#define _TEGRA20_USB_H_
+
+/* USB Controller (USBx_CONTROLLER_) regs */
+struct usb_ctlr {
+ /* 0x000 */
+ uint id;
+ uint reserved0;
+ uint host;
+ uint device;
+
+ /* 0x010 */
+ uint txbuf;
+ uint rxbuf;
+ uint reserved1[2];
+
+ /* 0x020 */
+ uint reserved2[56];
+
+ /* 0x100 */
+ u16 cap_length;
+ u16 hci_version;
+ uint hcs_params;
+ uint hcc_params;
+ uint reserved3[5];
+
+ /* 0x120 */
+ uint dci_version;
+ uint dcc_params;
+ uint reserved4[6];
+
+ /* 0x140 */
+ uint usb_cmd;
+ uint usb_sts;
+ uint usb_intr;
+ uint frindex;
+
+ /* 0x150 */
+ uint reserved5;
+ uint periodic_list_base;
+ uint async_list_addr;
+ uint async_tt_sts;
+
+ /* 0x160 */
+ uint burst_size;
+ uint tx_fill_tuning;
+ uint reserved6; /* is this port_sc1 on some controllers? */
+ uint icusb_ctrl;
+
+ /* 0x170 */
+ uint ulpi_viewport;
+ uint reserved7;
+ uint endpt_nak;
+ uint endpt_nak_enable;
+
+ /* 0x180 */
+ uint reserved;
+ uint port_sc1;
+ uint reserved8[6];
+
+ /* 0x1a0 */
+ uint reserved9;
+ uint otgsc;
+ uint usb_mode;
+ uint endpt_setup_stat;
+
+ /* 0x1b0 */
+ uint reserved10[20];
+
+ /* 0x200 */
+ uint reserved11[0x80];
+
+ /* 0x400 */
+ uint susp_ctrl;
+ uint phy_vbus_sensors;
+ uint phy_vbus_wakeup_id;
+ uint phy_alt_vbus_sys;
+
+ /* 0x410 */
+ uint usb1_legacy_ctrl;
+ uint reserved12[4];
+
+ /* 0x424 */
+ uint ulpi_timing_ctrl_0;
+ uint ulpi_timing_ctrl_1;
+ uint reserved13[53];
+
+ /* 0x500 */
+ uint reserved14[64 * 3];
+
+ /* 0x800 */
+ uint utmip_pll_cfg0;
+ uint utmip_pll_cfg1;
+ uint utmip_xcvr_cfg0;
+ uint utmip_bias_cfg0;
+
+ /* 0x810 */
+ uint utmip_hsrx_cfg0;
+ uint utmip_hsrx_cfg1;
+ uint utmip_fslsrx_cfg0;
+ uint utmip_fslsrx_cfg1;
+
+ /* 0x820 */
+ uint utmip_tx_cfg0;
+ uint utmip_misc_cfg0;
+ uint utmip_misc_cfg1;
+ uint utmip_debounce_cfg0;
+
+ /* 0x830 */
+ uint utmip_bat_chrg_cfg0;
+ uint utmip_spare_cfg0;
+ uint utmip_xcvr_cfg1;
+ uint utmip_bias_cfg1;
+};
+
+/* USB2_IF_ULPI_TIMING_CTRL_0 */
+#define ULPI_OUTPUT_PINMUX_BYP (1 << 10)
+#define ULPI_CLKOUT_PINMUX_BYP (1 << 11)
+
+/* USB2_IF_ULPI_TIMING_CTRL_1 */
+#define ULPI_DATA_TRIMMER_LOAD (1 << 0)
+#define ULPI_DATA_TRIMMER_SEL(x) (((x) & 0x7) << 1)
+#define ULPI_STPDIRNXT_TRIMMER_LOAD (1 << 16)
+#define ULPI_STPDIRNXT_TRIMMER_SEL(x) (((x) & 0x7) << 17)
+#define ULPI_DIR_TRIMMER_LOAD (1 << 24)
+#define ULPI_DIR_TRIMMER_SEL(x) (((x) & 0x7) << 25)
+
+/* PORTSC, USB2, USB3 */
+#define PTS_SHIFT 30
+#define PTS_MASK (3U << PTS_SHIFT)
+
+#define STS (1 << 29)
+#endif /* _TEGRA20_USB_H_ */
diff --git a/arch/arm/include/asm/arch-tegra30/usb.h b/arch/arm/include/asm/arch-tegra30/usb.h
new file mode 100644
index 0000000..ab9b760
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra30/usb.h
@@ -0,0 +1,168 @@
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * Copyright (c) 2013 NVIDIA Corporation
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _TEGRA30_USB_H_
+#define _TEGRA30_USB_H_
+
+/* USB Controller (USBx_CONTROLLER_) regs */
+struct usb_ctlr {
+ /* 0x000 */
+ uint id;
+ uint reserved0;
+ uint host;
+ uint device;
+
+ /* 0x010 */
+ uint txbuf;
+ uint rxbuf;
+ uint reserved1[2];
+
+ /* 0x020 */
+ uint reserved2[56];
+
+ /* 0x100 */
+ u16 cap_length;
+ u16 hci_version;
+ uint hcs_params;
+ uint hcc_params;
+ uint reserved3[5];
+
+ /* 0x120 */
+ uint dci_version;
+ uint dcc_params;
+ uint reserved4[2];
+
+ /* 0x130 */
+ uint usb_cmd;
+ uint usb_sts;
+ uint usb_intr;
+ uint frindex;
+
+ /* 0x140 */
+ uint reserved5;
+ uint periodic_list_base;
+ uint async_list_addr;
+ uint reserved5_1;
+
+ /* 0x150 */
+ uint burst_size;
+ uint tx_fill_tuning;
+ uint reserved6;
+ uint icusb_ctrl;
+
+ /* 0x160 */
+ uint ulpi_viewport;
+ uint reserved7[3];
+
+ /* 0x170 */
+ uint reserved;
+ uint port_sc1;
+ uint reserved8[6];
+
+ /* 0x190 */
+ uint reserved9[8];
+
+ /* 0x1b0 */
+ uint reserved10;
+ uint hostpc1_devlc;
+ uint reserved10_1[2];
+
+ /* 0x1c0 */
+ uint reserved10_2[4];
+
+ /* 0x1d0 */
+ uint reserved10_3[4];
+
+ /* 0x1e0 */
+ uint reserved10_4[4];
+
+ /* 0x1f0 */
+ uint reserved10_5;
+ uint otgsc;
+ uint usb_mode;
+ uint reserved10_6;
+
+ /* 0x200 */
+ uint endpt_nak;
+ uint endpt_nak_enable;
+ uint endpt_setup_stat;
+ uint reserved11_1[0x7D];
+
+ /* 0x400 */
+ uint susp_ctrl;
+ uint phy_vbus_sensors;
+ uint phy_vbus_wakeup_id;
+ uint phy_alt_vbus_sys;
+
+ /* 0x410 */
+ uint usb1_legacy_ctrl;
+ uint reserved12[3];
+
+ /* 0x420 */
+ uint reserved13[56];
+
+ /* 0x500 */
+ uint reserved14[64 * 3];
+
+ /* 0x800 */
+ uint utmip_pll_cfg0;
+ uint utmip_pll_cfg1;
+ uint utmip_xcvr_cfg0;
+ uint utmip_bias_cfg0;
+
+ /* 0x810 */
+ uint utmip_hsrx_cfg0;
+ uint utmip_hsrx_cfg1;
+ uint utmip_fslsrx_cfg0;
+ uint utmip_fslsrx_cfg1;
+
+ /* 0x820 */
+ uint utmip_tx_cfg0;
+ uint utmip_misc_cfg0;
+ uint utmip_misc_cfg1;
+ uint utmip_debounce_cfg0;
+
+ /* 0x830 */
+ uint utmip_bat_chrg_cfg0;
+ uint utmip_spare_cfg0;
+ uint utmip_xcvr_cfg1;
+ uint utmip_bias_cfg1;
+};
+
+/* USB2_IF_ULPI_TIMING_CTRL_0 */
+#define ULPI_OUTPUT_PINMUX_BYP (1 << 10)
+#define ULPI_CLKOUT_PINMUX_BYP (1 << 11)
+
+/* USB2_IF_ULPI_TIMING_CTRL_1 */
+#define ULPI_DATA_TRIMMER_LOAD (1 << 0)
+#define ULPI_DATA_TRIMMER_SEL(x) (((x) & 0x7) << 1)
+#define ULPI_STPDIRNXT_TRIMMER_LOAD (1 << 16)
+#define ULPI_STPDIRNXT_TRIMMER_SEL(x) (((x) & 0x7) << 17)
+#define ULPI_DIR_TRIMMER_LOAD (1 << 24)
+#define ULPI_DIR_TRIMMER_SEL(x) (((x) & 0x7) << 25)
+
+/* USB2D_HOSTPC1_DEVLC_0 */
+#define PTS_SHIFT 29
+#define PTS_MASK (0x7U << PTS_SHIFT)
+
+#define STS (1 << 28)
+#endif /* _TEGRA30_USB_H_ */
diff --git a/arch/arm/lib/relocate.S b/arch/arm/lib/relocate.S
index 949b9e8..cd2bab6 100644
--- a/arch/arm/lib/relocate.S
+++ b/arch/arm/lib/relocate.S
@@ -70,6 +70,15 @@
relocate_done:
+#ifdef __XSCALE__
+ /*
+ * On xscale, icache must be invalidated and write buffers drained,
+ * even with cache disabled - 4.2.7 of xscale core developer's manual
+ */
+ mcr p15, 0, r0, c7, c7, 0 /* invalidate icache */
+ mcr p15, 0, r0, c7, c10, 4 /* drain write buffer */
+#endif
+
/* ARMv4- don't know bx lr but the assembler fails to see that */
#ifdef __ARM_ARCH_4__