| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright 2021 NXP |
| */ |
| |
| #include <asm/io.h> |
| #include <asm/arch/clock.h> |
| #include <asm/arch/imx-regs.h> |
| #include <asm/arch/sys_proto.h> |
| #include <asm/armv8/mmu.h> |
| #include <asm/mach-imx/boot_mode.h> |
| #include <asm/global_data.h> |
| #include <efi_loader.h> |
| #include <event.h> |
| #include <spl.h> |
| #include <asm/arch/rdc.h> |
| #include <asm/mach-imx/s400_api.h> |
| #include <asm/mach-imx/mu_hal.h> |
| #include <cpu_func.h> |
| #include <asm/setup.h> |
| #include <dm.h> |
| #include <dm/device-internal.h> |
| #include <dm/lists.h> |
| #include <dm/uclass.h> |
| #include <dm/device.h> |
| #include <dm/uclass-internal.h> |
| #include <fuse.h> |
| #include <thermal.h> |
| #include <linux/iopoll.h> |
| #include <env.h> |
| #include <env_internal.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| struct rom_api *g_rom_api = (struct rom_api *)0x1980; |
| |
| bool is_usb_boot(void) |
| { |
| return get_boot_device() == USB_BOOT; |
| } |
| |
| #ifdef CONFIG_ENV_IS_IN_MMC |
| __weak int board_mmc_get_env_dev(int devno) |
| { |
| return devno; |
| } |
| |
| int mmc_get_env_dev(void) |
| { |
| int ret; |
| u32 boot; |
| u16 boot_type; |
| u8 boot_instance; |
| |
| ret = rom_api_query_boot_infor(QUERY_BT_DEV, &boot); |
| |
| if (ret != ROM_API_OKAY) { |
| puts("ROMAPI: failure at query_boot_info\n"); |
| return CONFIG_SYS_MMC_ENV_DEV; |
| } |
| |
| boot_type = boot >> 16; |
| boot_instance = (boot >> 8) & 0xff; |
| |
| /* If not boot from sd/mmc, use default value */ |
| if (boot_type != BOOT_TYPE_SD && boot_type != BOOT_TYPE_MMC) |
| return env_get_ulong("mmcdev", 10, CONFIG_SYS_MMC_ENV_DEV); |
| |
| return board_mmc_get_env_dev(boot_instance); |
| } |
| #endif |
| |
| static void set_cpu_info(struct sentinel_get_info_data *info) |
| { |
| gd->arch.soc_rev = info->soc; |
| gd->arch.lifecycle = info->lc; |
| memcpy((void *)&gd->arch.uid, &info->uid, 4 * sizeof(u32)); |
| } |
| |
| u32 get_cpu_rev(void) |
| { |
| u32 rev = (gd->arch.soc_rev >> 24) - 0xa0; |
| |
| return (MXC_CPU_IMX8ULP << 12) | (CHIP_REV_1_0 + rev); |
| } |
| |
| enum bt_mode get_boot_mode(void) |
| { |
| u32 bt0_cfg = 0; |
| |
| bt0_cfg = readl(SIM_SEC_BASE_ADDR + 0x24); |
| bt0_cfg &= (BT0CFG_LPBOOT_MASK | BT0CFG_DUALBOOT_MASK); |
| |
| if (!(bt0_cfg & BT0CFG_LPBOOT_MASK)) { |
| /* No low power boot */ |
| if (bt0_cfg & BT0CFG_DUALBOOT_MASK) |
| return DUAL_BOOT; |
| else |
| return SINGLE_BOOT; |
| } |
| |
| return LOW_POWER_BOOT; |
| } |
| |
| bool m33_image_booted(void) |
| { |
| if (IS_ENABLED(CONFIG_SPL_BUILD)) { |
| u32 gp6 = 0; |
| |
| /* DGO_GP6 */ |
| gp6 = readl(SIM_SEC_BASE_ADDR + 0x28); |
| if (gp6 & BIT(5)) |
| return true; |
| |
| return false; |
| } else { |
| u32 gpr0 = readl(SIM1_BASE_ADDR); |
| if (gpr0 & BIT(0)) |
| return true; |
| |
| return false; |
| } |
| } |
| |
| bool rdc_enabled_in_boot(void) |
| { |
| if (IS_ENABLED(CONFIG_SPL_BUILD)) { |
| u32 val = 0; |
| int ret; |
| bool rdc_en = true; /* Default assume DBD_EN is set */ |
| |
| /* Read DBD_EN fuse */ |
| ret = fuse_read(8, 1, &val); |
| if (!ret) |
| rdc_en = !!(val & 0x200); /* only A1 part uses DBD_EN, so check DBD_EN new place*/ |
| |
| return rdc_en; |
| } else { |
| u32 gpr0 = readl(SIM1_BASE_ADDR); |
| if (gpr0 & 0x2) |
| return true; |
| |
| return false; |
| } |
| } |
| |
| static void spl_pass_boot_info(void) |
| { |
| if (IS_ENABLED(CONFIG_SPL_BUILD)) { |
| bool m33_booted = m33_image_booted(); |
| bool rdc_en = rdc_enabled_in_boot(); |
| u32 val = 0; |
| |
| if (m33_booted) |
| val |= 0x1; |
| |
| if (rdc_en) |
| val |= 0x2; |
| |
| writel(val, SIM1_BASE_ADDR); |
| } |
| } |
| |
| bool is_m33_handshake_necessary(void) |
| { |
| /* Only need handshake in u-boot */ |
| if (!IS_ENABLED(CONFIG_SPL_BUILD)) |
| return (m33_image_booted() || rdc_enabled_in_boot()); |
| else |
| return false; |
| } |
| |
| int m33_image_handshake(ulong timeout_ms) |
| { |
| u32 fsr; |
| int ret; |
| ulong timeout_us = timeout_ms * 1000; |
| |
| /* Notify m33 that it's ready to do init srtm(enable mu receive interrupt and so on) */ |
| setbits_le32(MU0_B_BASE_ADDR + 0x100, BIT(0)); /* set FCR F0 flag of MU0_MUB */ |
| |
| /* |
| * Wait m33 to set FCR F0 flag of MU0_MUA |
| * Clear FCR F0 flag of MU0_MUB after m33 has set FCR F0 flag of MU0_MUA |
| */ |
| ret = readl_poll_sleep_timeout(MU0_B_BASE_ADDR + 0x104, fsr, fsr & BIT(0), 10, timeout_us); |
| if (!ret) |
| clrbits_le32(MU0_B_BASE_ADDR + 0x100, BIT(0)); |
| |
| return ret; |
| } |
| |
| #define CMC_SRS_TAMPER BIT(31) |
| #define CMC_SRS_SECURITY BIT(30) |
| #define CMC_SRS_TZWDG BIT(29) |
| #define CMC_SRS_JTAG_RST BIT(28) |
| #define CMC_SRS_CORE1 BIT(16) |
| #define CMC_SRS_LOCKUP BIT(15) |
| #define CMC_SRS_SW BIT(14) |
| #define CMC_SRS_WDG BIT(13) |
| #define CMC_SRS_PIN_RESET BIT(8) |
| #define CMC_SRS_WARM BIT(4) |
| #define CMC_SRS_HVD BIT(3) |
| #define CMC_SRS_LVD BIT(2) |
| #define CMC_SRS_POR BIT(1) |
| #define CMC_SRS_WUP BIT(0) |
| |
| static char *get_reset_cause(char *ret) |
| { |
| u32 cause1, cause = 0, srs = 0; |
| void __iomem *reg_ssrs = (void __iomem *)(CMC1_BASE_ADDR + 0x88); |
| void __iomem *reg_srs = (void __iomem *)(CMC1_BASE_ADDR + 0x80); |
| |
| if (!ret) |
| return "null"; |
| |
| srs = readl(reg_srs); |
| cause1 = readl(reg_ssrs); |
| |
| cause = srs & (CMC_SRS_POR | CMC_SRS_WUP | CMC_SRS_WARM); |
| |
| switch (cause) { |
| case CMC_SRS_POR: |
| sprintf(ret, "%s", "POR"); |
| break; |
| case CMC_SRS_WUP: |
| sprintf(ret, "%s", "WUP"); |
| break; |
| case CMC_SRS_WARM: |
| cause = srs & (CMC_SRS_WDG | CMC_SRS_SW | |
| CMC_SRS_JTAG_RST); |
| switch (cause) { |
| case CMC_SRS_WDG: |
| sprintf(ret, "%s", "WARM-WDG"); |
| break; |
| case CMC_SRS_SW: |
| sprintf(ret, "%s", "WARM-SW"); |
| break; |
| case CMC_SRS_JTAG_RST: |
| sprintf(ret, "%s", "WARM-JTAG"); |
| break; |
| default: |
| sprintf(ret, "%s", "WARM-UNKN"); |
| break; |
| } |
| break; |
| default: |
| sprintf(ret, "%s-%X", "UNKN", srs); |
| break; |
| } |
| |
| debug("[%X] SRS[%X] %X - ", cause1, srs, srs ^ cause1); |
| return ret; |
| } |
| |
| #if defined(CONFIG_DISPLAY_CPUINFO) |
| const char *get_imx_type(u32 imxtype) |
| { |
| return "8ULP"; |
| } |
| |
| int print_cpuinfo(void) |
| { |
| u32 cpurev; |
| char cause[18]; |
| |
| cpurev = get_cpu_rev(); |
| |
| printf("CPU: i.MX%s rev%d.%d at %d MHz\n", |
| get_imx_type((cpurev & 0xFF000) >> 12), |
| (cpurev & 0x000F0) >> 4, (cpurev & 0x0000F) >> 0, |
| mxc_get_clock(MXC_ARM_CLK) / 1000000); |
| |
| #if defined(CONFIG_IMX_PMC_TEMPERATURE) |
| struct udevice *udev; |
| int ret, temp; |
| |
| ret = uclass_get_device(UCLASS_THERMAL, 0, &udev); |
| if (!ret) { |
| ret = thermal_get_temp(udev, &temp); |
| if (!ret) |
| printf("CPU current temperature: %d\n", temp); |
| else |
| debug(" - failed to get CPU current temperature\n"); |
| } else { |
| debug(" - failed to get CPU current temperature\n"); |
| } |
| #endif |
| |
| printf("Reset cause: %s\n", get_reset_cause(cause)); |
| |
| printf("Boot mode: "); |
| switch (get_boot_mode()) { |
| case LOW_POWER_BOOT: |
| printf("Low power boot\n"); |
| break; |
| case DUAL_BOOT: |
| printf("Dual boot\n"); |
| break; |
| case SINGLE_BOOT: |
| default: |
| printf("Single boot\n"); |
| break; |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| #define UNLOCK_WORD0 0xC520 /* 1st unlock word */ |
| #define UNLOCK_WORD1 0xD928 /* 2nd unlock word */ |
| #define REFRESH_WORD0 0xA602 /* 1st refresh word */ |
| #define REFRESH_WORD1 0xB480 /* 2nd refresh word */ |
| |
| static void disable_wdog(void __iomem *wdog_base) |
| { |
| u32 val_cs = readl(wdog_base + 0x00); |
| |
| if (!(val_cs & 0x80)) |
| return; |
| |
| dmb(); |
| __raw_writel(REFRESH_WORD0, (wdog_base + 0x04)); /* Refresh the CNT */ |
| __raw_writel(REFRESH_WORD1, (wdog_base + 0x04)); |
| dmb(); |
| |
| if (!(val_cs & 800)) { |
| dmb(); |
| __raw_writel(UNLOCK_WORD0, (wdog_base + 0x04)); |
| __raw_writel(UNLOCK_WORD1, (wdog_base + 0x04)); |
| dmb(); |
| |
| while (!(readl(wdog_base + 0x00) & 0x800)) |
| ; |
| } |
| writel(0x0, (wdog_base + 0x0C)); /* Set WIN to 0 */ |
| writel(0x400, (wdog_base + 0x08)); /* Set timeout to default 0x400 */ |
| writel(0x120, (wdog_base + 0x00)); /* Disable it and set update */ |
| |
| while (!(readl(wdog_base + 0x00) & 0x400)) |
| ; |
| } |
| |
| void init_wdog(void) |
| { |
| disable_wdog((void __iomem *)WDG3_RBASE); |
| } |
| |
| static struct mm_region imx8ulp_arm64_mem_map[] = { |
| { |
| /* ROM */ |
| .virt = 0x0, |
| .phys = 0x0, |
| .size = 0x40000UL, |
| .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | |
| PTE_BLOCK_OUTER_SHARE |
| }, |
| { |
| /* FLEXSPI0 */ |
| .virt = 0x04000000, |
| .phys = 0x04000000, |
| .size = 0x08000000UL, |
| .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | |
| PTE_BLOCK_NON_SHARE | |
| PTE_BLOCK_PXN | PTE_BLOCK_UXN |
| }, |
| { |
| /* SSRAM (align with 2M) */ |
| .virt = 0x1FE00000UL, |
| .phys = 0x1FE00000UL, |
| .size = 0x400000UL, |
| .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | |
| PTE_BLOCK_OUTER_SHARE | |
| PTE_BLOCK_PXN | PTE_BLOCK_UXN |
| }, { |
| /* SRAM1 (align with 2M) */ |
| .virt = 0x21000000UL, |
| .phys = 0x21000000UL, |
| .size = 0x200000UL, |
| .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | |
| PTE_BLOCK_OUTER_SHARE | |
| PTE_BLOCK_PXN | PTE_BLOCK_UXN |
| }, { |
| /* SRAM0 (align with 2M) */ |
| .virt = 0x22000000UL, |
| .phys = 0x22000000UL, |
| .size = 0x200000UL, |
| .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | |
| PTE_BLOCK_OUTER_SHARE | |
| PTE_BLOCK_PXN | PTE_BLOCK_UXN |
| }, { |
| /* Peripherals */ |
| .virt = 0x27000000UL, |
| .phys = 0x27000000UL, |
| .size = 0x3000000UL, |
| .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | |
| PTE_BLOCK_NON_SHARE | |
| PTE_BLOCK_PXN | PTE_BLOCK_UXN |
| }, { |
| /* Peripherals */ |
| .virt = 0x2D000000UL, |
| .phys = 0x2D000000UL, |
| .size = 0x1600000UL, |
| .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | |
| PTE_BLOCK_NON_SHARE | |
| PTE_BLOCK_PXN | PTE_BLOCK_UXN |
| }, { |
| /* FLEXSPI1-2 */ |
| .virt = 0x40000000UL, |
| .phys = 0x40000000UL, |
| .size = 0x40000000UL, |
| .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | |
| PTE_BLOCK_NON_SHARE | |
| PTE_BLOCK_PXN | PTE_BLOCK_UXN |
| }, { |
| /* DRAM1 */ |
| .virt = 0x80000000UL, |
| .phys = 0x80000000UL, |
| .size = PHYS_SDRAM_SIZE, |
| .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | |
| PTE_BLOCK_OUTER_SHARE |
| }, { |
| /* |
| * empty entrie to split table entry 5 |
| * if needed when TEEs are used |
| */ |
| 0, |
| }, { |
| /* List terminator */ |
| 0, |
| } |
| }; |
| |
| struct mm_region *mem_map = imx8ulp_arm64_mem_map; |
| |
| static unsigned int imx8ulp_find_dram_entry_in_mem_map(void) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(imx8ulp_arm64_mem_map); i++) |
| if (imx8ulp_arm64_mem_map[i].phys == CFG_SYS_SDRAM_BASE) |
| return i; |
| |
| hang(); /* Entry not found, this must never happen. */ |
| } |
| |
| /* simplify the page table size to enhance boot speed */ |
| #define MAX_PTE_ENTRIES 512 |
| #define MAX_MEM_MAP_REGIONS 16 |
| u64 get_page_table_size(void) |
| { |
| u64 one_pt = MAX_PTE_ENTRIES * sizeof(u64); |
| u64 size = 0; |
| |
| /* |
| * For each memory region, the max table size: |
| * 2 level 3 tables + 2 level 2 tables + 1 level 1 table |
| */ |
| size = (2 + 2 + 1) * one_pt * MAX_MEM_MAP_REGIONS + one_pt; |
| |
| /* |
| * We need to duplicate our page table once to have an emergency pt to |
| * resort to when splitting page tables later on |
| */ |
| size *= 2; |
| |
| /* |
| * We may need to split page tables later on if dcache settings change, |
| * so reserve up to 4 (random pick) page tables for that. |
| */ |
| size += one_pt * 4; |
| |
| return size; |
| } |
| |
| void enable_caches(void) |
| { |
| /* If OPTEE runs, remove OPTEE memory from MMU table to avoid speculative prefetch */ |
| if (rom_pointer[1]) { |
| /* |
| * TEE are loaded, So the ddr bank structures |
| * have been modified update mmu table accordingly |
| */ |
| int i = 0; |
| int entry = imx8ulp_find_dram_entry_in_mem_map(); |
| u64 attrs = imx8ulp_arm64_mem_map[entry].attrs; |
| |
| while (i < CONFIG_NR_DRAM_BANKS && |
| entry < ARRAY_SIZE(imx8ulp_arm64_mem_map)) { |
| if (gd->bd->bi_dram[i].start == 0) |
| break; |
| imx8ulp_arm64_mem_map[entry].phys = gd->bd->bi_dram[i].start; |
| imx8ulp_arm64_mem_map[entry].virt = gd->bd->bi_dram[i].start; |
| imx8ulp_arm64_mem_map[entry].size = gd->bd->bi_dram[i].size; |
| imx8ulp_arm64_mem_map[entry].attrs = attrs; |
| debug("Added memory mapping (%d): %llx %llx\n", entry, |
| imx8ulp_arm64_mem_map[entry].phys, imx8ulp_arm64_mem_map[entry].size); |
| i++; entry++; |
| } |
| } |
| |
| icache_enable(); |
| dcache_enable(); |
| } |
| |
| __weak int board_phys_sdram_size(phys_size_t *size) |
| { |
| if (!size) |
| return -EINVAL; |
| |
| *size = PHYS_SDRAM_SIZE; |
| return 0; |
| } |
| |
| int dram_init(void) |
| { |
| unsigned int entry = imx8ulp_find_dram_entry_in_mem_map(); |
| phys_size_t sdram_size; |
| int ret; |
| |
| ret = board_phys_sdram_size(&sdram_size); |
| if (ret) |
| return ret; |
| |
| /* rom_pointer[1] contains the size of TEE occupies */ |
| if (rom_pointer[1]) |
| gd->ram_size = sdram_size - rom_pointer[1]; |
| else |
| gd->ram_size = sdram_size; |
| |
| /* also update the SDRAM size in the mem_map used externally */ |
| imx8ulp_arm64_mem_map[entry].size = sdram_size; |
| return 0; |
| } |
| |
| int dram_init_banksize(void) |
| { |
| int bank = 0; |
| int ret; |
| phys_size_t sdram_size; |
| |
| ret = board_phys_sdram_size(&sdram_size); |
| if (ret) |
| return ret; |
| |
| gd->bd->bi_dram[bank].start = PHYS_SDRAM; |
| if (rom_pointer[1]) { |
| phys_addr_t optee_start = (phys_addr_t)rom_pointer[0]; |
| phys_size_t optee_size = (size_t)rom_pointer[1]; |
| |
| gd->bd->bi_dram[bank].size = optee_start - gd->bd->bi_dram[bank].start; |
| if ((optee_start + optee_size) < (PHYS_SDRAM + sdram_size)) { |
| if (++bank >= CONFIG_NR_DRAM_BANKS) { |
| puts("CONFIG_NR_DRAM_BANKS is not enough\n"); |
| return -1; |
| } |
| |
| gd->bd->bi_dram[bank].start = optee_start + optee_size; |
| gd->bd->bi_dram[bank].size = PHYS_SDRAM + |
| sdram_size - gd->bd->bi_dram[bank].start; |
| } |
| } else { |
| gd->bd->bi_dram[bank].size = sdram_size; |
| } |
| |
| return 0; |
| } |
| |
| phys_size_t get_effective_memsize(void) |
| { |
| /* return the first bank as effective memory */ |
| if (rom_pointer[1]) |
| return ((phys_addr_t)rom_pointer[0] - PHYS_SDRAM); |
| |
| return gd->ram_size; |
| } |
| |
| #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG |
| void get_board_serial(struct tag_serialnr *serialnr) |
| { |
| u32 uid[4]; |
| u32 res; |
| int ret; |
| |
| ret = ahab_read_common_fuse(1, uid, 4, &res); |
| if (ret) |
| printf("ahab read fuse failed %d, 0x%x\n", ret, res); |
| else |
| printf("UID 0x%x,0x%x,0x%x,0x%x\n", uid[0], uid[1], uid[2], uid[3]); |
| |
| serialnr->low = uid[0]; |
| serialnr->high = uid[3]; |
| } |
| #endif |
| |
| static void set_core0_reset_vector(u32 entry) |
| { |
| /* Update SIM1 DGO8 for reset vector base */ |
| writel(entry, SIM1_BASE_ADDR + 0x5c); |
| |
| /* set update bit */ |
| setbits_le32(SIM1_BASE_ADDR + 0x8, 0x1 << 24); |
| |
| /* polling the ack */ |
| while ((readl(SIM1_BASE_ADDR + 0x8) & (0x1 << 26)) == 0) |
| ; |
| |
| /* clear the update */ |
| clrbits_le32(SIM1_BASE_ADDR + 0x8, (0x1 << 24)); |
| |
| /* clear the ack by set 1 */ |
| setbits_le32(SIM1_BASE_ADDR + 0x8, (0x1 << 26)); |
| } |
| |
| /* Not used now */ |
| int trdc_set_access(void) |
| { |
| /* |
| * TRDC mgr + 4 MBC + 2 MRC. |
| */ |
| trdc_mbc_set_access(2, 7, 0, 49, true); |
| trdc_mbc_set_access(2, 7, 0, 50, true); |
| trdc_mbc_set_access(2, 7, 0, 51, true); |
| trdc_mbc_set_access(2, 7, 0, 52, true); |
| trdc_mbc_set_access(2, 7, 0, 53, true); |
| trdc_mbc_set_access(2, 7, 0, 54, true); |
| |
| /* 0x1fff8000 used for resource table by remoteproc */ |
| trdc_mbc_set_access(0, 7, 2, 31, false); |
| |
| /* CGC0: PBridge0 slot 47 and PCC0 slot 48 */ |
| trdc_mbc_set_access(2, 7, 0, 47, false); |
| trdc_mbc_set_access(2, 7, 0, 48, false); |
| |
| /* PCC1 */ |
| trdc_mbc_set_access(2, 7, 1, 17, false); |
| trdc_mbc_set_access(2, 7, 1, 34, false); |
| |
| /* Iomuxc0: : PBridge1 slot 33 */ |
| trdc_mbc_set_access(2, 7, 1, 33, false); |
| |
| /* flexspi0 */ |
| trdc_mbc_set_access(2, 7, 0, 57, false); |
| trdc_mrc_region_set_access(0, 7, 0x04000000, 0x0c000000, false); |
| |
| /* tpm0: PBridge1 slot 21 */ |
| trdc_mbc_set_access(2, 7, 1, 21, false); |
| /* lpi2c0: PBridge1 slot 24 */ |
| trdc_mbc_set_access(2, 7, 1, 24, false); |
| |
| /* Allow M33 to access TRDC MGR */ |
| trdc_mbc_set_access(2, 6, 0, 49, true); |
| trdc_mbc_set_access(2, 6, 0, 50, true); |
| trdc_mbc_set_access(2, 6, 0, 51, true); |
| trdc_mbc_set_access(2, 6, 0, 52, true); |
| trdc_mbc_set_access(2, 6, 0, 53, true); |
| trdc_mbc_set_access(2, 6, 0, 54, true); |
| |
| /* Set SAI0 for eDMA 0, NS */ |
| trdc_mbc_set_access(2, 0, 1, 28, false); |
| |
| /* Set SSRAM for eDMA0 access */ |
| trdc_mbc_set_access(0, 0, 2, 0, false); |
| trdc_mbc_set_access(0, 0, 2, 1, false); |
| trdc_mbc_set_access(0, 0, 2, 2, false); |
| trdc_mbc_set_access(0, 0, 2, 3, false); |
| trdc_mbc_set_access(0, 0, 2, 4, false); |
| trdc_mbc_set_access(0, 0, 2, 5, false); |
| trdc_mbc_set_access(0, 0, 2, 6, false); |
| trdc_mbc_set_access(0, 0, 2, 7, false); |
| |
| writel(0x800000a0, 0x28031840); |
| |
| return 0; |
| } |
| |
| void lpav_configure(bool lpav_to_m33) |
| { |
| if (!lpav_to_m33) |
| setbits_le32(SIM_SEC_BASE_ADDR + 0x44, BIT(7)); /* LPAV to APD */ |
| |
| /* PXP/GPU 2D/3D/DCNANO/MIPI_DSI/EPDC/HIFI4 to APD */ |
| setbits_le32(SIM_SEC_BASE_ADDR + 0x4c, 0x7F); |
| |
| /* LPAV slave/dma2 ch allocation and request allocation to APD */ |
| writel(0x1f, SIM_SEC_BASE_ADDR + 0x50); |
| writel(0xffffffff, SIM_SEC_BASE_ADDR + 0x54); |
| writel(0x003fffff, SIM_SEC_BASE_ADDR + 0x58); |
| } |
| |
| void load_lposc_fuse(void) |
| { |
| int ret; |
| u32 val = 0, val2 = 0, reg; |
| |
| ret = fuse_read(25, 0, &val); |
| if (ret) |
| return; /* failed */ |
| |
| ret = fuse_read(25, 1, &val2); |
| if (ret) |
| return; /* failed */ |
| |
| /* LPOSCCTRL */ |
| reg = readl(0x2802f304); |
| reg &= ~0xff; |
| reg |= (val & 0xff); |
| writel(reg, 0x2802f304); |
| } |
| |
| void set_lpav_qos(void) |
| { |
| /* Set read QoS of dcnano on LPAV NIC */ |
| writel(0xf, 0x2e447100); |
| } |
| |
| int arch_cpu_init(void) |
| { |
| if (IS_ENABLED(CONFIG_SPL_BUILD)) { |
| /* Enable System Reset Interrupt using WDOG_AD */ |
| setbits_le32(CMC1_BASE_ADDR + 0x8C, BIT(13)); |
| /* Clear AD_PERIPH Power switch domain out of reset interrupt flag */ |
| setbits_le32(CMC1_BASE_ADDR + 0x70, BIT(4)); |
| |
| if (readl(CMC1_BASE_ADDR + 0x90) & BIT(13)) { |
| /* Clear System Reset Interrupt Flag Register of WDOG_AD */ |
| setbits_le32(CMC1_BASE_ADDR + 0x90, BIT(13)); |
| /* Reset WDOG to clear reset request */ |
| pcc_reset_peripheral(3, WDOG3_PCC3_SLOT, true); |
| pcc_reset_peripheral(3, WDOG3_PCC3_SLOT, false); |
| } |
| |
| /* Disable wdog */ |
| init_wdog(); |
| |
| if (get_boot_mode() == SINGLE_BOOT) |
| lpav_configure(false); |
| else |
| lpav_configure(true); |
| |
| /* Release xrdc, then allow A35 to write SRAM2 */ |
| if (rdc_enabled_in_boot()) |
| release_rdc(RDC_XRDC); |
| |
| xrdc_mrc_region_set_access(2, CONFIG_SPL_TEXT_BASE, 0xE00); |
| |
| clock_init_early(); |
| |
| spl_pass_boot_info(); |
| } else { |
| int ret; |
| /* reconfigure core0 reset vector to ROM */ |
| set_core0_reset_vector(0x1000); |
| |
| if (is_m33_handshake_necessary()) { |
| /* Start handshake with M33 to ensure TRDC configuration completed */ |
| ret = m33_image_handshake(1000); |
| if (!ret) |
| gd->arch.m33_handshake_done = true; |
| else /* Skip and go through to panic in checkcpu as console is ready then */ |
| gd->arch.m33_handshake_done = false; |
| } |
| } |
| |
| return 0; |
| } |
| |
| int checkcpu(void) |
| { |
| if (is_m33_handshake_necessary()) { |
| if (!gd->arch.m33_handshake_done) { |
| puts("M33 Sync: Timeout, Boot Stop!\n"); |
| hang(); |
| } else { |
| puts("M33 Sync: OK\n"); |
| } |
| } |
| return 0; |
| } |
| |
| int imx8ulp_dm_post_init(void) |
| { |
| struct udevice *devp; |
| int ret; |
| u32 res; |
| struct sentinel_get_info_data *info = (struct sentinel_get_info_data *)SRAM0_BASE; |
| |
| ret = uclass_get_device_by_driver(UCLASS_MISC, DM_DRIVER_GET(imx8ulp_mu), &devp); |
| if (ret) { |
| printf("could not get S400 mu %d\n", ret); |
| return ret; |
| } |
| |
| ret = ahab_get_info(info, &res); |
| if (ret) { |
| printf("ahab_get_info failed %d\n", ret); |
| /* fallback to A0.1 revision */ |
| memset((void *)info, 0, sizeof(struct sentinel_get_info_data)); |
| info->soc = 0xa000084d; |
| } |
| |
| set_cpu_info(info); |
| |
| return 0; |
| } |
| |
| static int imx8ulp_evt_dm_post_init(void *ctx, struct event *event) |
| { |
| return imx8ulp_dm_post_init(); |
| } |
| EVENT_SPY(EVT_DM_POST_INIT_F, imx8ulp_evt_dm_post_init); |
| |
| #if defined(CONFIG_SPL_BUILD) |
| __weak void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image) |
| { |
| debug("image entry point: 0x%lx\n", spl_image->entry_point); |
| |
| set_core0_reset_vector((u32)spl_image->entry_point); |
| |
| /* Enable the 512KB cache */ |
| setbits_le32(SIM1_BASE_ADDR + 0x30, (0x1 << 4)); |
| |
| /* reset core */ |
| setbits_le32(SIM1_BASE_ADDR + 0x30, (0x1 << 16)); |
| |
| while (1) |
| ; |
| } |
| #endif |
| |
| void imx_get_mac_from_fuse(int dev_id, unsigned char *mac) |
| { |
| u32 val[2] = {}; |
| int ret; |
| |
| ret = fuse_read(5, 3, &val[0]); |
| if (ret) |
| goto err; |
| |
| ret = fuse_read(5, 4, &val[1]); |
| if (ret) |
| goto err; |
| |
| mac[0] = val[0]; |
| mac[1] = val[0] >> 8; |
| mac[2] = val[0] >> 16; |
| mac[3] = val[0] >> 24; |
| mac[4] = val[1]; |
| mac[5] = val[1] >> 8; |
| |
| debug("%s: MAC%d: %02x.%02x.%02x.%02x.%02x.%02x\n", |
| __func__, dev_id, mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]); |
| return; |
| err: |
| memset(mac, 0, 6); |
| printf("%s: fuse read err: %d\n", __func__, ret); |
| } |
| |
| int (*card_emmc_is_boot_part_en)(void) = (void *)0x67cc; |
| u32 spl_arch_boot_image_offset(u32 image_offset, u32 rom_bt_dev) |
| { |
| /* Hard code for eMMC image_offset on 8ULP ROM, need fix by ROM, temp workaround */ |
| if (is_soc_rev(CHIP_REV_1_0) && ((rom_bt_dev >> 16) & 0xff) == BT_DEV_TYPE_MMC && |
| card_emmc_is_boot_part_en()) |
| image_offset = 0; |
| |
| return image_offset; |
| } |
| |
| enum env_location env_get_location(enum env_operation op, int prio) |
| { |
| enum boot_device dev = get_boot_device(); |
| enum env_location env_loc = ENVL_UNKNOWN; |
| |
| if (prio) |
| return env_loc; |
| |
| switch (dev) { |
| #ifdef CONFIG_ENV_IS_IN_SPI_FLASH |
| case QSPI_BOOT: |
| env_loc = ENVL_SPI_FLASH; |
| break; |
| #endif |
| #ifdef CONFIG_ENV_IS_IN_MMC |
| case SD1_BOOT: |
| case SD2_BOOT: |
| case SD3_BOOT: |
| case MMC1_BOOT: |
| case MMC2_BOOT: |
| case MMC3_BOOT: |
| env_loc = ENVL_MMC; |
| break; |
| #endif |
| default: |
| #if defined(CONFIG_ENV_IS_NOWHERE) |
| env_loc = ENVL_NOWHERE; |
| #endif |
| break; |
| } |
| |
| return env_loc; |
| } |