arm: rpi: Switch to a text environment
Use the new environment format so we can drop most of the config.h file.
Signed-off-by: Simon Glass <sjg@chromium.org>
diff --git a/board/raspberrypi/rpi/rpi.env b/board/raspberrypi/rpi/rpi.env
new file mode 100644
index 0000000..3022828
--- /dev/null
+++ b/board/raspberrypi/rpi/rpi.env
@@ -0,0 +1,77 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+/* environment for Raspberry Pi boards */
+
+dhcpuboot=usb start; dhcp u-boot.uimg; bootm
+
+/* Environment */
+stdin=serial,usbkbd
+stdout=serial,vidconsole
+stderr=serial,vidconsole
+
+/* DFU over USB/UDC */
+#ifdef CONFIG_CMD_DFU
+dfu_alt_info=u-boot.bin fat 0 1;uboot.env fat 0 1;
+ config.txt fat 0 1;
+#ifdef CONFIG_ARM64
+dfu_alt_info+=Image fat 0 1
+#else
+dfu_alt_info+=zImage fat 0 1
+#endif
+#endif /* CONFIG_CMD_DFU */
+
+/*
+ * Memory layout for where various images get loaded by boot scripts:
+ *
+ * I suspect address 0 is used as the SMP pen on the RPi2, so avoid this.
+ *
+ * Older versions of the boot firmware place the firmware-loaded DTB at 0x100,
+ * newer versions place it in high memory. So prevent U-Boot from doing its own
+ * DTB + initrd relocation so that we won't accidentally relocate the initrd
+ * over the firmware-loaded DTB and generally try to lay out things starting
+ * from the bottom of RAM.
+ *
+ * kernel_addr_r has different constraints on ARM and Aarch64. For 32-bit ARM,
+ * it must be within the first 128M of RAM in order for the kernel's
+ * CONFIG_AUTO_ZRELADDR option to work. The kernel itself will be decompressed
+ * to 0x8000 but the decompressor clobbers 0x4000-0x8000 as well. The
+ * decompressor also likes to relocate itself to right past the end of the
+ * decompressed kernel, so in total the sum of the compressed and
+ * decompressed kernel needs to be reserved.
+ *
+ * For Aarch64, the kernel image is uncompressed and must be loaded at
+ * text_offset bytes (specified in the header of the Image) into a 2MB
+ * boundary. The 'booti' command relocates the image if necessary. Linux uses
+ * a default text_offset of 0x80000. In summary, loading at 0x80000
+ * satisfies all these constraints and reserving memory up to 0x02400000
+ * permits fairly large (roughly 36M) kernels.
+ *
+ * scriptaddr and pxefile_addr_r can be pretty much anywhere that doesn't
+ * conflict with something else. Reserving 1M for each of them at
+ * 0x02400000-0x02500000 and 0x02500000-0x02600000 should be plenty.
+ *
+ * On ARM, both the DTB and any possible initrd must be loaded such that they
+ * fit inside the lowmem mapping in Linux. In practice, this usually means not
+ * more than ~700M away from the start of the kernel image but this number can
+ * be larger OR smaller depending on e.g. the 'vmalloc=xxxM' command line
+ * parameter given to the kernel. So reserving memory from low to high
+ * satisfies this constraint again. Reserving 1M at 0x02600000-0x02700000 for
+ * the DTB leaves rest of the free RAM to the initrd starting at 0x02700000.
+ * Even with the smallest possible CPU-GPU memory split of the CPU getting
+ * only 64M, the remaining 25M starting at 0x02700000 should allow quite
+ * large initrds before they start colliding with U-Boot.
+ */
+#ifdef CONFIG_ARM64
+fdt_high=ffffffffffffffff
+initrd_high=ffffffffffffffff
+#else
+fdt_high=ffffffff
+initrd_high=ffffffff
+#endif
+kernel_addr_r=0x00080000
+scriptaddr=0x02400000
+pxefile_addr_r=0x02500000
+fdt_addr_r=0x02600000
+ramdisk_addr_r=0x02700000
+
+boot_targets=mmc usb pxe dhcp
diff --git a/include/configs/rpi.h b/include/configs/rpi.h
index 4160db2..8e56bdc 100644
--- a/include/configs/rpi.h
+++ b/include/configs/rpi.h
@@ -13,8 +13,6 @@
#include <asm/arch/base.h>
#endif
-/* Architecture, CPU, etc.*/
-
/* Use SoC timer for AArch32, but architected timer for AArch64 */
#ifndef CONFIG_ARM64
#define CFG_SYS_TIMER_RATE 1000000
@@ -33,102 +31,4 @@
*/
#define CFG_SYS_SDRAM_SIZE SZ_128M
-/* Devices */
-/* LCD */
-
-/* DFU over USB/UDC */
-#ifdef CONFIG_CMD_DFU
-#ifdef CONFIG_ARM64
-#define KERNEL_FILENAME "Image"
-#else
-#define KERNEL_FILENAME "zImage"
-#endif
-
-#define ENV_DFU_SETTINGS \
- "dfu_alt_info=u-boot.bin fat 0 1;uboot.env fat 0 1;" \
- "config.txt fat 0 1;" \
- KERNEL_FILENAME " fat 0 1\0"
-#else
-#define ENV_DFU_SETTINGS ""
-#endif
-
-/* Console configuration */
-
-/* Environment */
-
-/* Shell */
-
-/* Environment */
-#define ENV_DEVICE_SETTINGS \
- "stdin=serial,usbkbd\0" \
- "stdout=serial,vidconsole\0" \
- "stderr=serial,vidconsole\0"
-
-#ifdef CONFIG_ARM64
-#define FDT_HIGH "ffffffffffffffff"
-#define INITRD_HIGH "ffffffffffffffff"
-#else
-#define FDT_HIGH "ffffffff"
-#define INITRD_HIGH "ffffffff"
-#endif
-
-/*
- * Memory layout for where various images get loaded by boot scripts:
- *
- * I suspect address 0 is used as the SMP pen on the RPi2, so avoid this.
- *
- * Older versions of the boot firmware place the firmware-loaded DTB at 0x100,
- * newer versions place it in high memory. So prevent U-Boot from doing its own
- * DTB + initrd relocation so that we won't accidentally relocate the initrd
- * over the firmware-loaded DTB and generally try to lay out things starting
- * from the bottom of RAM.
- *
- * kernel_addr_r has different constraints on ARM and Aarch64. For 32-bit ARM,
- * it must be within the first 128M of RAM in order for the kernel's
- * CONFIG_AUTO_ZRELADDR option to work. The kernel itself will be decompressed
- * to 0x8000 but the decompressor clobbers 0x4000-0x8000 as well. The
- * decompressor also likes to relocate itself to right past the end of the
- * decompressed kernel, so in total the sum of the compressed and and
- * decompressed kernel needs to be reserved.
- *
- * For Aarch64, the kernel image is uncompressed and must be loaded at
- * text_offset bytes (specified in the header of the Image) into a 2MB
- * boundary. The 'booti' command relocates the image if necessary. Linux uses
- * a default text_offset of 0x80000. In summary, loading at 0x80000
- * satisfies all these constraints and reserving memory up to 0x02400000
- * permits fairly large (roughly 36M) kernels.
- *
- * scriptaddr and pxefile_addr_r can be pretty much anywhere that doesn't
- * conflict with something else. Reserving 1M for each of them at
- * 0x02400000-0x02500000 and 0x02500000-0x02600000 should be plenty.
- *
- * On ARM, both the DTB and any possible initrd must be loaded such that they
- * fit inside the lowmem mapping in Linux. In practice, this usually means not
- * more than ~700M away from the start of the kernel image but this number can
- * be larger OR smaller depending on e.g. the 'vmalloc=xxxM' command line
- * parameter given to the kernel. So reserving memory from low to high
- * satisfies this constraint again. Reserving 1M at 0x02600000-0x02700000 for
- * the DTB leaves rest of the free RAM to the initrd starting at 0x02700000.
- * Even with the smallest possible CPU-GPU memory split of the CPU getting
- * only 64M, the remaining 25M starting at 0x02700000 should allow quite
- * large initrds before they start colliding with U-Boot.
- */
-#define ENV_MEM_LAYOUT_SETTINGS \
- "fdt_high=" FDT_HIGH "\0" \
- "initrd_high=" INITRD_HIGH "\0" \
- "kernel_addr_r=0x00080000\0" \
- "scriptaddr=0x02400000\0" \
- "pxefile_addr_r=0x02500000\0" \
- "fdt_addr_r=0x02600000\0" \
- "ramdisk_addr_r=0x02700000\0"
-
-#define BOOT_TARGETS "mmc usb pxe dhcp"
-
-#define CFG_EXTRA_ENV_SETTINGS \
- "dhcpuboot=usb start; dhcp u-boot.uimg; bootm\0" \
- ENV_DEVICE_SETTINGS \
- ENV_DFU_SETTINGS \
- ENV_MEM_LAYOUT_SETTINGS \
- "boot_targets=" BOOT_TARGETS "\0"
-
#endif