Kconfig: Add a CONFIG_IDE option
At present IDE support is controlled by CONFIG_CMD_IDE. Add a separate
CONFIG_IDE option so that IDE support can be enabled without requiring
the 'ide' command.
Update existing users and move the ide driver into drivers/block since
it should not be in common/.
Signed-off-by: Simon Glass <sjg@chromium.org>
diff --git a/include/config_distro_bootcmd.h b/include/config_distro_bootcmd.h
index 0e01e82..4b2c493 100644
--- a/include/config_distro_bootcmd.h
+++ b/include/config_distro_bootcmd.h
@@ -186,16 +186,16 @@
BOOT_TARGET_DEVICES_references_SCSI_without_CONFIG_SCSI
#endif
-#ifdef CONFIG_CMD_IDE
+#ifdef CONFIG_IDE
#define BOOTENV_SHARED_IDE BOOTENV_SHARED_BLKDEV(ide)
#define BOOTENV_DEV_IDE BOOTENV_DEV_BLKDEV
#define BOOTENV_DEV_NAME_IDE BOOTENV_DEV_NAME_BLKDEV
#else
#define BOOTENV_SHARED_IDE
#define BOOTENV_DEV_IDE \
- BOOT_TARGET_DEVICES_references_IDE_without_CONFIG_CMD_IDE
+ BOOT_TARGET_DEVICES_references_IDE_without_CONFIG_IDE
#define BOOTENV_DEV_NAME_IDE \
- BOOT_TARGET_DEVICES_references_IDE_without_CONFIG_CMD_IDE
+ BOOT_TARGET_DEVICES_references_IDE_without_CONFIG_IDE
#endif
#if defined(CONFIG_CMD_PCI_ENUM) || defined(CONFIG_DM_PCI)
diff --git a/include/config_fallbacks.h b/include/config_fallbacks.h
index 7aa5b02..5a698a8 100644
--- a/include/config_fallbacks.h
+++ b/include/config_fallbacks.h
@@ -43,7 +43,7 @@
#endif
/* Rather than repeat this expression each time, add a define for it */
-#if defined(CONFIG_CMD_IDE) || \
+#if defined(CONFIG_IDE) || \
defined(CONFIG_CMD_SATA) || \
defined(CONFIG_SCSI) || \
defined(CONFIG_CMD_USB) || \
diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h
index e7c6f8b..3efd7e5 100644
--- a/include/configs/M5253DEMO.h
+++ b/include/configs/M5253DEMO.h
@@ -38,7 +38,7 @@
* Command line configuration.
*/
-#ifdef CONFIG_CMD_IDE
+#ifdef CONFIG_IDE
/* ATA */
# define CONFIG_IDE_RESET 1
# define CONFIG_IDE_PREINIT 1
diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h
index e7627f7..cc5cc7b 100644
--- a/include/configs/edminiv2.h
+++ b/include/configs/edminiv2.h
@@ -139,7 +139,7 @@
/*
* IDE
*/
-#ifdef CONFIG_CMD_IDE
+#ifdef CONFIG_IDE
#define __io
#define CONFIG_IDE_PREINIT
/* ED Mini V has an IDE-compatible SATA connector for port 1 */
diff --git a/include/configs/ib62x0.h b/include/configs/ib62x0.h
index 36a66bb..0b92d7b 100644
--- a/include/configs/ib62x0.h
+++ b/include/configs/ib62x0.h
@@ -87,14 +87,14 @@
/*
* SATA driver configuration
*/
-#ifdef CONFIG_CMD_IDE
+#ifdef CONFIG_IDE
#define __io
#define CONFIG_IDE_PREINIT
#define CONFIG_MVSATA_IDE_USE_PORT0
#define CONFIG_MVSATA_IDE_USE_PORT1
#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
-#endif /* CONFIG_CMD_IDE */
+#endif /* CONFIG_IDE */
/*
* RTC driver configuration
diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h
index d2c2101..43e4a32 100644
--- a/include/configs/lsxl.h
+++ b/include/configs/lsxl.h
@@ -145,7 +145,7 @@
#undef CONFIG_RESET_PHY_R
#endif /* CONFIG_CMD_NET */
-#ifdef CONFIG_CMD_IDE
+#ifdef CONFIG_IDE
#undef CONFIG_IDE_LED
#undef CONFIG_SYS_IDE_MAXBUS
#define CONFIG_SYS_IDE_MAXBUS 1
diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h
index 14cf2e8..5c9a2d9 100644
--- a/include/configs/mpc5121ads.h
+++ b/include/configs/mpc5121ads.h
@@ -411,10 +411,10 @@
"1m(u-boot);" \
"mpc5121.nand:-(data)"
-#if defined(CONFIG_CMD_IDE) || defined(CONFIG_CMD_EXT2) || defined(CONFIG_CMD_USB)
+#if defined(CONFIG_IDE) || defined(CONFIG_CMD_EXT2) || defined(CONFIG_CMD_USB)
#define CONFIG_SUPPORT_VFAT
-#endif /* defined(CONFIG_CMD_IDE) */
+#endif /* defined(CONFIG_IDE) */
/*
* Watchdog timeout = CONFIG_SYS_WATCHDOG_VALUE * 65536 / IPS clock.
diff --git a/include/configs/nsa310s.h b/include/configs/nsa310s.h
index b988d3d..9b99b0e 100644
--- a/include/configs/nsa310s.h
+++ b/include/configs/nsa310s.h
@@ -79,12 +79,12 @@
#endif /* CONFIG_CMD_NET */
/* SATA driver configuration */
-#ifdef CONFIG_CMD_IDE
+#ifdef CONFIG_IDE
#define __io
#define CONFIG_IDE_PREINIT
#define CONFIG_MVSATA_IDE_USE_PORT0
#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
-#endif /* CONFIG_CMD_IDE */
+#endif /* CONFIG_IDE */
/* RTC driver configuration */
#ifdef CONFIG_CMD_DATE
diff --git a/include/configs/qemu-x86.h b/include/configs/qemu-x86.h
index b751ad5..3509c2f 100644
--- a/include/configs/qemu-x86.h
+++ b/include/configs/qemu-x86.h
@@ -25,9 +25,9 @@
* - AHCI controller is supported for QEMU '-M q35' target
*
* Default configuraion is to support the QEMU default x86 target
- * Undefine CONFIG_CMD_IDE to support q35 target
+ * Undefine CONFIG_IDE to support q35 target
*/
-#ifdef CONFIG_CMD_IDE
+#ifdef CONFIG_IDE
#define CONFIG_SYS_IDE_MAXBUS 2
#define CONFIG_SYS_IDE_MAXDEVICE 4
#define CONFIG_SYS_ATA_BASE_ADDR 0
diff --git a/include/configs/r7780mp.h b/include/configs/r7780mp.h
index 26c5f0f..bb79a9f 100644
--- a/include/configs/r7780mp.h
+++ b/include/configs/r7780mp.h
@@ -119,7 +119,7 @@
#endif
/* Compact flash Support */
-#if defined(CONFIG_CMD_IDE)
+#if defined(CONFIG_IDE)
#define CONFIG_IDE_RESET 1
#define CONFIG_SYS_PIO_MODE 1
#define CONFIG_SYS_IDE_MAXBUS 1 /* IDE bus */
@@ -130,6 +130,6 @@
#define CONFIG_SYS_ATA_REG_OFFSET 0x1000 /* reg offset */
#define CONFIG_SYS_ATA_ALT_OFFSET 0x800 /* alternate register offset */
#define CONFIG_IDE_SWAP_IO
-#endif /* CONFIG_CMD_IDE */
+#endif /* CONFIG_IDE */
#endif /* __R7780RP_H */
diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h
index a111057..9d2c106 100644
--- a/include/configs/sheevaplug.h
+++ b/include/configs/sheevaplug.h
@@ -90,13 +90,13 @@
/*
* SATA driver configuration
*/
-#ifdef CONFIG_CMD_IDE
+#ifdef CONFIG_IDE
#define __io
#define CONFIG_IDE_PREINIT
#define CONFIG_MVSATA_IDE_USE_PORT0
#define CONFIG_MVSATA_IDE_USE_PORT1
#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
-#endif /* CONFIG_CMD_IDE */
+#endif /* CONFIG_IDE */
#endif /* _CONFIG_SHEEVAPLUG_H */
diff --git a/include/pcmcia.h b/include/pcmcia.h
index c8a730c..aaaf651 100644
--- a/include/pcmcia.h
+++ b/include/pcmcia.h
@@ -16,7 +16,7 @@
* or try to generate a useful default
*/
#if defined(CONFIG_CMD_PCMCIA) || \
- (defined(CONFIG_CMD_IDE) && \
+ (defined(CONFIG_IDE) && \
(defined(CONFIG_IDE_8xx_PCCARD) || defined(CONFIG_IDE_8xx_DIRECT) ) )
#if !defined(CONFIG_PCMCIA_SLOT_A) && !defined(CONFIG_PCMCIA_SLOT_B)
@@ -268,7 +268,7 @@
#define PCMCIA_PGCRX(slot) (*pcmcia_pgcrx[slot])
#endif
-#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
+#if defined(CONFIG_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
extern int check_ide_device(int slot);
#endif