arm: dts: u8500: u-boot: Add fixed clock for eMMC
So far there is no need for a clock driver in U-Boot because the
previous boot stage leaves all the necessary clocks on. However,
some drivers in U-Boot (e.g. arm_pl180_mmci) depend on having a clock
driver to obtain the clock frequency.
Setting up the clock drivers properly is a bit tricky on U8500,
so for now add a simple fixed-clock for the eMMC that allows obtaining
the clock frequency. This should be replaced eventually if some board
actually requires enabling some of the clocks.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
diff --git a/arch/arm/dts/ste-dbx5x0-u-boot.dtsi b/arch/arm/dts/ste-dbx5x0-u-boot.dtsi
index 4a99ee5..e350175 100644
--- a/arch/arm/dts/ste-dbx5x0-u-boot.dtsi
+++ b/arch/arm/dts/ste-dbx5x0-u-boot.dtsi
@@ -4,8 +4,14 @@
#include "ste-dbx5x0.dtsi"
/ {
+ /* FIXME: Remove this when clk driver is implemented */
+ sdmmcclk: sdmmcclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ };
+
soc {
- /* FIXME: Remove this when clk driver is implemented */
mtu@a03c6000 {
clock-frequency = <133000000>;
};
@@ -18,6 +24,9 @@
uart@80007000 {
clock = <38400000>;
};
+ mmc@80005000 {
+ clocks = <&sdmmcclk>;
+ };
};
reboot {