fpga: zynqmp: reduce zynqmppl_load() code
Reduce the function code by calling xilinx_pm_request() once only.
Use the same variable bsize_req to store either bstream size in bytes
or an address of bstream size according to a type required by the
firmware version. Remove obsolete debug().
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
Tested-by: Ricardo Salveti <ricardo@foundries.io>
Tested-by: Adrian Fiergolski <adrian.fiergolski@fastree3d.com>
Link: https://lore.kernel.org/r/20220722141614.297383-11-oleksandr.suvorov@foundries.io
Signed-off-by: Michal Simek <michal.simek@amd.com>
diff --git a/drivers/fpga/zynqmppl.c b/drivers/fpga/zynqmppl.c
index a062456..2791f93 100644
--- a/drivers/fpga/zynqmppl.c
+++ b/drivers/fpga/zynqmppl.c
@@ -207,38 +207,33 @@
ulong bin_buf;
int ret;
u32 buf_lo, buf_hi;
+ u32 bsize_req = (u32)bsize;
u32 ret_payload[PAYLOAD_ARG_CNT];
- bool xilfpga_old = false;
if (zynqmp_firmware_version() <= PMUFW_V1_0) {
puts("WARN: PMUFW v1.0 or less is detected\n");
puts("WARN: Not all bitstream formats are supported\n");
puts("WARN: Please upgrade PMUFW\n");
- xilfpga_old = true;
if (zynqmp_validate_bitstream(desc, buf, bsize, bsize, &swap))
return FPGA_FAIL;
bsizeptr = (u32 *)&bsize;
flush_dcache_range((ulong)bsizeptr,
(ulong)bsizeptr + sizeof(size_t));
+ bsize_req = (u32)(uintptr_t)bsizeptr;
bstype |= BIT(ZYNQMP_FPGA_BIT_NS);
+ } else {
+ bstype = 0;
}
bin_buf = zynqmp_align_dma_buffer((u32 *)buf, bsize, swap);
- debug("%s called!\n", __func__);
flush_dcache_range(bin_buf, bin_buf + bsize);
buf_lo = (u32)bin_buf;
buf_hi = upper_32_bits(bin_buf);
- if (xilfpga_old)
- ret = xilinx_pm_request(PM_FPGA_LOAD, buf_lo,
- buf_hi, (u32)(uintptr_t)bsizeptr,
- bstype, ret_payload);
- else
- ret = xilinx_pm_request(PM_FPGA_LOAD, buf_lo,
- buf_hi, (u32)bsize, 0, ret_payload);
-
+ ret = xilinx_pm_request(PM_FPGA_LOAD, buf_lo, buf_hi,
+ bsize_req, bstype, ret_payload);
if (ret)
printf("PL FPGA LOAD failed with err: 0x%08x\n", ret);