mtd: nand: Check if NAND is locked tight before lock cmds
If the NAND is locked tight, commands such as lock and unlock will not
work, but the NAND chip may not report an error. Check the lock tight
status before attempting such operations so that an error status can be
reported if we know the operation will not succeed.
Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c
index 2ba0c5e..ff2d348 100644
--- a/drivers/mtd/nand/nand_util.c
+++ b/drivers/mtd/nand/nand_util.c
@@ -237,6 +237,14 @@
/* select the NAND device */
chip->select_chip(mtd, 0);
+ /* check the Lock Tight Status */
+ chip->cmdfunc(mtd, NAND_CMD_LOCK_STATUS, -1, 0);
+ if (chip->read_byte(mtd) & NAND_LOCK_STATUS_TIGHT) {
+ printf("nand_lock: Device is locked tight!\n");
+ ret = -1;
+ goto out;
+ }
+
chip->cmdfunc(mtd,
(tight ? NAND_CMD_LOCK_TIGHT : NAND_CMD_LOCK),
-1, -1);
@@ -249,6 +257,7 @@
ret = -1;
}
+ out:
/* de-select the NAND device */
chip->select_chip(mtd, -1);
return ret;
@@ -337,6 +346,15 @@
goto out;
}
+ /* check the Lock Tight Status */
+ page = (int)(start >> chip->page_shift);
+ chip->cmdfunc(mtd, NAND_CMD_LOCK_STATUS, -1, page & chip->pagemask);
+ if (chip->read_byte(mtd) & NAND_LOCK_STATUS_TIGHT) {
+ printf("nand_unlock: Device is locked tight!\n");
+ ret = -1;
+ goto out;
+ }
+
if ((start & (mtd->erasesize - 1)) != 0) {
printf("nand_unlock: Start address must be beginning of "
"nand block!\n");
@@ -358,7 +376,6 @@
length -= mtd->erasesize;
/* submit address of first page to unlock */
- page = (int)(start >> chip->page_shift);
chip->cmdfunc(mtd, NAND_CMD_UNLOCK1, -1, page & chip->pagemask);
/* submit ADDRESS of LAST page to unlock */