mpc5xxx: Remove all references to MGT5100
We do not support a processor that never reached a real customer.
Signed-off-by: Detlev Zundel <dzu@denx.de>
diff --git a/board/total5200/mt48lc16m16a2-75.h b/board/total5200/mt48lc16m16a2-75.h
index 5b0923e..ae237c6 100644
--- a/board/total5200/mt48lc16m16a2-75.h
+++ b/board/total5200/mt48lc16m16a2-75.h
@@ -23,21 +23,8 @@
#define SDRAM_DDR 0 /* is SDR */
-#if defined(CONFIG_MPC5200)
/* Settings for XLB = 132 MHz */
#define SDRAM_MODE 0x00CD0000
#define SDRAM_CONTROL 0x504F0000
#define SDRAM_CONFIG1 0xD2322800
#define SDRAM_CONFIG2 0x8AD70000
-
-#elif defined(CONFIG_MGT5100)
-/* Settings for XLB = 66 MHz */
-#define SDRAM_MODE 0x008D0000
-#define SDRAM_CONTROL 0x504F0000
-#define SDRAM_CONFIG1 0xC2222600
-#define SDRAM_CONFIG2 0x88B70004
-#define SDRAM_ADDRSEL 0x02000000
-
-#else
-#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
-#endif
diff --git a/board/total5200/mt48lc32m16a2-75.h b/board/total5200/mt48lc32m16a2-75.h
index 4b5ac80..cb4b43d 100644
--- a/board/total5200/mt48lc32m16a2-75.h
+++ b/board/total5200/mt48lc32m16a2-75.h
@@ -28,13 +28,8 @@
#define SDRAM_DDR 0 /* is SDR */
-#if defined(CONFIG_MPC5200)
/* Settings for XLB = 132 MHz */
#define SDRAM_MODE 0x00CD0000
#define SDRAM_CONTROL 0x514F0000
#define SDRAM_CONFIG1 0xD2322800
#define SDRAM_CONFIG2 0x8AD70000
-
-#else
-#error CONFIG_MPC5200 is not defined
-#endif
diff --git a/board/total5200/sdram.c b/board/total5200/sdram.c
index dc4c6f1..d883eb6 100644
--- a/board/total5200/sdram.c
+++ b/board/total5200/sdram.c
@@ -76,7 +76,6 @@
* is something else than 0x00000000.
*/
-#if defined(CONFIG_MPC5200)
long int mpc5xxx_sdram_init (sdram_conf_t *sdram_conf)
{
ulong dramsize = 0;
@@ -174,54 +173,3 @@
return dramsize + dramsize2;
}
-
-#elif defined(CONFIG_MGT5100)
-
-long int mpc5xxx_sdram_init (sdram_conf_t *sdram_conf)
-{
- ulong dramsize = 0;
-#ifndef CONFIG_SYS_RAMBOOT
- ulong test1, test2;
-
- /* setup and enable SDRAM chip selects */
- *(vu_long *)MPC5XXX_SDRAM_START = 0x00000000;
- *(vu_long *)MPC5XXX_SDRAM_STOP = 0x0000ffff;/* 2G */
- *(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */
- __asm__ volatile ("sync");
-
- /* setup config registers */
- *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = sdram_conf->config1;
- *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = sdram_conf->config2;
-
- /* address select register */
- *(vu_long *)MPC5XXX_SDRAM_XLBSEL = sdram_conf->addrsel;
- __asm__ volatile ("sync");
-
- /* find RAM size */
- mpc5xxx_sdram_start(sdram_conf, 0);
- test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
- mpc5xxx_sdram_start(sdram_conf, 1);
- test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
- if (test1 > test2) {
- mpc5xxx_sdram_start(sdram_conf, 0);
- dramsize = test1;
- } else {
- dramsize = test2;
- }
-
- /* set SDRAM end address according to size */
- *(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15);
-
-#else /* CONFIG_SYS_RAMBOOT */
-
- /* Retrieve amount of SDRAM available */
- dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15);
-
-#endif /* CONFIG_SYS_RAMBOOT */
-
- return dramsize;
-}
-
-#else
-#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
-#endif
diff --git a/board/total5200/sdram.h b/board/total5200/sdram.h
index bc21e1d..396a190 100644
--- a/board/total5200/sdram.h
+++ b/board/total5200/sdram.h
@@ -28,12 +28,7 @@
ulong control;
ulong config1;
ulong config2;
-#if defined(CONFIG_MPC5200)
ulong tapdelay;
-#endif
-#if defined(CONFIG_MGT5100)
- ulong addrsel;
-#endif
} sdram_conf_t;
long int mpc5xxx_sdram_init (sdram_conf_t *sdram_conf);
diff --git a/board/total5200/total5200.c b/board/total5200/total5200.c
index c524d63..61b5b80 100644
--- a/board/total5200/total5200.c
+++ b/board/total5200/total5200.c
@@ -47,26 +47,17 @@
sdram_conf.control = SDRAM_CONTROL;
sdram_conf.config1 = SDRAM_CONFIG1;
sdram_conf.config2 = SDRAM_CONFIG2;
-#if defined(CONFIG_MPC5200)
sdram_conf.tapdelay = 0;
-#endif
-#if defined(CONFIG_MGT5100)
- sdram_conf.addrsel = SDRAM_ADDRSEL;
-#endif
return mpc5xxx_sdram_init (&sdram_conf);
}
int checkboard (void)
{
-#if defined(CONFIG_MPC5200)
#if CONFIG_TOTAL5200_REV==2
puts ("Board: Total5200 Rev.2 ");
#else
puts ("Board: Total5200 ");
#endif
-#elif defined(CONFIG_MGT5100)
- puts ("Board: Total5100 ");
-#endif
/*
* Retrieve FPGA Revision.
@@ -85,20 +76,6 @@
return 0;
}
-#if defined(CONFIG_MGT5100)
-int board_early_init_r(void)
-{
- /*
- * Now, when we are in RAM, enable CS0
- * because CS_BOOT cannot be written.
- */
- *(vu_long *)MPC5XXX_ADDECR &= ~(1 << 25); /* disable CS_BOOT */
- *(vu_long *)MPC5XXX_ADDECR |= (1 << 16); /* enable CS0 */
-
- return 0;
-}
-#endif
-
#ifdef CONFIG_PCI
static struct pci_controller hose;
@@ -266,9 +243,7 @@
void video_get_info_str (int line_number, char *info)
{
if (line_number == 1) {
-#ifdef CONFIG_MGT5100
- strcpy (info, " Total5100");
-#elif CONFIG_TOTAL5200_REV==1
+#if CONFIG_TOTAL5200_REV==1
strcpy (info, " Total5200");
#elif CONFIG_TOTAL5200_REV==2
strcpy (info, " Total5200 Rev.2");