board: sama5d3xek: Convert to CONFIG_DM_VIDEO
Convert the board to support the video driver model, add the device
tree node, and remove the unnecessary code.
Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
diff --git a/arch/arm/dts/sama5d36ek_cmp.dts b/arch/arm/dts/sama5d36ek_cmp.dts
index be41490..c17bc9f 100644
--- a/arch/arm/dts/sama5d36ek_cmp.dts
+++ b/arch/arm/dts/sama5d36ek_cmp.dts
@@ -8,6 +8,7 @@
/dts-v1/;
#include "sama5d36.dtsi"
#include "sama5d3xmb_cmp.dtsi"
+#include "sama5d3xdm.dtsi"
/ {
model = "Atmel SAMA5D36-EK";
diff --git a/arch/arm/dts/sama5d3_lcd.dtsi b/arch/arm/dts/sama5d3_lcd.dtsi
index 14d7c2b..10fb3a9 100644
--- a/arch/arm/dts/sama5d3_lcd.dtsi
+++ b/arch/arm/dts/sama5d3_lcd.dtsi
@@ -14,31 +14,12 @@
ahb {
apb {
hlcdc: hlcdc@f0030000 {
- compatible = "atmel,sama5d3-hlcdc";
+ compatible = "atmel,at91sam9x5-hlcdc";
reg = <0xf0030000 0x2000>;
interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
clock-names = "periph_clk","sys_clk", "slow_clk";
status = "disabled";
-
- hlcdc-display-controller {
- compatible = "atmel,hlcdc-display-controller";
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
- };
-
- hlcdc_pwm: hlcdc-pwm {
- compatible = "atmel,hlcdc-pwm";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lcd_pwm>;
- #pwm-cells = <3>;
- };
};
pinctrl@fffff200 {
diff --git a/arch/arm/dts/sama5d3xdm.dtsi b/arch/arm/dts/sama5d3xdm.dtsi
index 035ab72..b3df9af 100644
--- a/arch/arm/dts/sama5d3xdm.dtsi
+++ b/arch/arm/dts/sama5d3xdm.dtsi
@@ -10,6 +10,32 @@
/ {
ahb {
apb {
+ hlcdc: hlcdc@f0030000 {
+ atmel,vl-bpix = <4>;
+ atmel,output-mode = <24>;
+ atmel,guard-time = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_pwm &pinctrl_lcd_rgb888_alt>;
+ status = "okay";
+ u-boot,dm-pre-reloc;
+
+ display-timings {
+ u-boot,dm-pre-reloc;
+ 800x480 {
+ clock-frequency = <24000000>;
+ hactive = <800>;
+ vactive = <480>;
+ hsync-len = <5>;
+ hfront-porch = <64>;
+ hback-porch = <64>;
+ vfront-porch = <22>;
+ vback-porch = <21>;
+ vsync-len = <5>;
+ u-boot,dm-pre-reloc;
+ };
+ };
+ };
+
i2c1: i2c@f0018000 {
qt1070: keyboard@1b {
compatible = "qt1070";