ARM: dts: stm32: Sync DT with v4.20 kernel for stm32f7

Synchronize stm32f7 device tree with kernel v4.20.

All pinctrl bindings are updated.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
diff --git a/arch/arm/dts/stm32746g-eval-u-boot.dtsi b/arch/arm/dts/stm32746g-eval-u-boot.dtsi
index 27d3c8a..9b55bb7 100644
--- a/arch/arm/dts/stm32746g-eval-u-boot.dtsi
+++ b/arch/arm/dts/stm32746g-eval-u-boot.dtsi
@@ -19,7 +19,7 @@
 		gpio8 = &gpioi;
 		gpio9 = &gpioj;
 		gpio10 = &gpiok;
-		mmc0 = &sdio;
+		mmc0 = &sdio1;
 		spi0 = &qspi;
 	};
 
@@ -66,97 +66,114 @@
 &pinctrl {
 	ethernet_mii: mii@0 {
 		pins {
-			pinmux = <STM32F746_PG13_FUNC_ETH_MII_TXD0_ETH_RMII_TXD0>,
-				 <STM32F746_PG14_FUNC_ETH_MII_TXD1_ETH_RMII_TXD1>,
-				 <STM32F746_PG11_FUNC_ETH_MII_TX_EN_ETH_RMII_TX_EN>,
-				 <STM32F746_PA2_FUNC_ETH_MDIO>,
-				 <STM32F746_PC1_FUNC_ETH_MDC>,
-				 <STM32F746_PA1_FUNC_ETH_MII_RX_CLK_ETH_RMII_REF_CLK>,
-				 <STM32F746_PA7_FUNC_ETH_MII_RX_DV_ETH_RMII_CRS_DV>,
-				 <STM32F746_PC4_FUNC_ETH_MII_RXD0_ETH_RMII_RXD0>,
-				<STM32F746_PC5_FUNC_ETH_MII_RXD1_ETH_RMII_RXD1>;
+			pinmux = <STM32_PINMUX('A', 0, AF11)>, /*ETH_MII_CRS */
+				 <STM32_PINMUX('A', 1, AF11)>, /*ETH_MII_RX_CLK */
+				 <STM32_PINMUX('A', 7, AF11)>, /*ETH_MII_RX_DV */
+				 <STM32_PINMUX('A', 8, AF0)>, /*ETH_MII_MCO1 */
+				 <STM32_PINMUX('G',13, AF11)>, /*ETH_MII_TXD0 */
+				 <STM32_PINMUX('G',14, AF11)>, /*ETH_MII_TXD1 */
+				 <STM32_PINMUX('C', 2, AF11)>, /*ETH_MII_TXD2 */
+				 <STM32_PINMUX('E', 2, AF11)>, /*ETH_MII_TXD3 */
+				 <STM32_PINMUX('C', 3, AF11)>, /*ETH_MII_TX_CLK */
+				 <STM32_PINMUX('C', 4, AF11)>, /*ETH_MII_RXD0 */
+				 <STM32_PINMUX('C', 5, AF11)>, /*ETH_MII_RXD1 */
+				 <STM32_PINMUX('H', 6, AF11)>, /*ETH_MII_RXD2 */
+				 <STM32_PINMUX('H', 7, AF11)>, /*ETH_MII_RXD3 */
+				 <STM32_PINMUX('G',11, AF11)>, /*ETH_MII_TX_EN */
+				 <STM32_PINMUX('C', 1, AF11)>, /*ETH_MII_MDC */
+				 <STM32_PINMUX('A', 2, AF11)>; /*ETH_MII_MDIO */
 			slew-rate = <2>;
 		};
 	};
 
 	fmc_pins: fmc@0 {
 		pins {
-			pinmux = <STM32F746_PI10_FUNC_FMC_D31>, /* FMC_D31 */
-				 <STM32F746_PI9_FUNC_FMC_D30>,  /* FMC_D30*/
-				 <STM32F746_PI7_FUNC_FMC_D29>,  /* FMC_D29 */
-				 <STM32F746_PI6_FUNC_FMC_D28>,  /* FMC_D28 */
-				 <STM32F746_PI3_FUNC_FMC_D27>,  /* FMC_D27 */
-				 <STM32F746_PI2_FUNC_FMC_D26>,  /* FMC_D26 */
-				 <STM32F746_PI1_FUNC_FMC_D25>,  /* FMC_D25 */
-				 <STM32F746_PI0_FUNC_FMC_D24>,  /* FMC_D24 */
-				 <STM32F746_PH15_FUNC_FMC_D23>, /* FMC_D23 */
-				 <STM32F746_PH14_FUNC_FMC_D22>, /* FMC_D22 */
-				 <STM32F746_PH13_FUNC_FMC_D21>, /* FMC_D21 */
-				 <STM32F746_PH12_FUNC_FMC_D20>, /* FMC_D20 */
-				 <STM32F746_PH11_FUNC_FMC_D19>, /* FMC_D19 */
-				 <STM32F746_PH10_FUNC_FMC_D18>, /* FMC_D18 */
-				 <STM32F746_PH9_FUNC_FMC_D17>,  /* FMC_D17 */
-				 <STM32F746_PH8_FUNC_FMC_D16>,  /* FMC_D16 */
+			pinmux = <STM32_PINMUX('I',10, AF12)>, /* D31 */
+				 <STM32_PINMUX('I', 9, AF12)>, /* D30 */
+				 <STM32_PINMUX('I', 7, AF12)>, /* D29 */
+				 <STM32_PINMUX('I', 6, AF12)>, /* D28 */
+				 <STM32_PINMUX('I', 3, AF12)>, /* D27 */
+				 <STM32_PINMUX('I', 2, AF12)>, /* D26 */
+				 <STM32_PINMUX('I', 1, AF12)>, /* D25 */
+				 <STM32_PINMUX('I', 0, AF12)>, /* D24 */
+				 <STM32_PINMUX('H',15, AF12)>, /* D23 */
+				 <STM32_PINMUX('H',14, AF12)>, /* D22 */
+				 <STM32_PINMUX('H',13, AF12)>, /* D21 */
+				 <STM32_PINMUX('H',12, AF12)>, /* D20 */
+				 <STM32_PINMUX('H',11, AF12)>, /* D19 */
+				 <STM32_PINMUX('H',10, AF12)>, /* D18 */
+				 <STM32_PINMUX('H', 9, AF12)>, /* D17 */
+				 <STM32_PINMUX('H', 8, AF12)>, /* D16 */
 
-				 <STM32F746_PD10_FUNC_FMC_D15>, /* FMC_D15 */
-				 <STM32F746_PD9_FUNC_FMC_D14>, /* FMC_D14*/
-				 <STM32F746_PD8_FUNC_FMC_D13>, /* FMC_D13 */
-				 <STM32F746_PE15_FUNC_FMC_D12>,/* FMC_D12 */
-				 <STM32F746_PE14_FUNC_FMC_D11>,/* FMC_D11 */
-				 <STM32F746_PE13_FUNC_FMC_D10>,/* FMC_D10 */
-				 <STM32F746_PE12_FUNC_FMC_D9>, /* FMC_D9 */
-				 <STM32F746_PE11_FUNC_FMC_D8>, /* FMC_D8 */
-				 <STM32F746_PE10_FUNC_FMC_D7>, /* FMC_D7 */
-				 <STM32F746_PE9_FUNC_FMC_D6>,  /* FMC_D6 */
-				 <STM32F746_PE8_FUNC_FMC_D5>,  /* FMC_D5*/
-				 <STM32F746_PE7_FUNC_FMC_D4>,  /* FMC_D4 */
-				 <STM32F746_PD1_FUNC_FMC_D3>,  /* FMC_D3 */
-				 <STM32F746_PD0_FUNC_FMC_D2>,  /* FMC_D2 */
-				 <STM32F746_PD15_FUNC_FMC_D1>, /* FMC_D1 */
-				 <STM32F746_PD14_FUNC_FMC_D0>, /* FMC_D0 */
+				 <STM32_PINMUX('D',10, AF12)>, /* D15 */
+				 <STM32_PINMUX('D', 9, AF12)>, /* D14 */
+				 <STM32_PINMUX('D', 8, AF12)>, /* D13 */
+				 <STM32_PINMUX('E',15, AF12)>, /* D12 */
+				 <STM32_PINMUX('E',14, AF12)>, /* D11 */
+				 <STM32_PINMUX('E',13, AF12)>, /* D10 */
+				 <STM32_PINMUX('E',12, AF12)>, /* D9 */
+				 <STM32_PINMUX('E',11, AF12)>, /* D8 */
+				 <STM32_PINMUX('E',10, AF12)>, /* D7 */
+				 <STM32_PINMUX('E', 9, AF12)>, /* D6 */
+				 <STM32_PINMUX('E', 8, AF12)>, /* D5 */
+				 <STM32_PINMUX('E', 7, AF12)>, /* D4 */
+				 <STM32_PINMUX('D', 1, AF12)>, /* D3 */
+				 <STM32_PINMUX('D', 0, AF12)>, /* D2 */
+				 <STM32_PINMUX('D',15, AF12)>, /* D1 */
+				 <STM32_PINMUX('D',14, AF12)>, /* D0 */
 
-				 <STM32F746_PI5_FUNC_FMC_NBL3>, /* FMC_NBL3 */
-				 <STM32F746_PI4_FUNC_FMC_NBL2>, /* FMC_NBL2 */
-				 <STM32F746_PE1_FUNC_FMC_NBL1>, /* FMC_NBL1 */
-				 <STM32F746_PE0_FUNC_FMC_NBL0>, /* FMC_NBL0 */
+				 <STM32_PINMUX('I', 5, AF12)>, /* NBL3 */
+				 <STM32_PINMUX('I', 4, AF12)>, /* NBL2 */
+				 <STM32_PINMUX('E', 1, AF12)>, /* NBL1 */
+				 <STM32_PINMUX('E', 0, AF12)>, /* NBL0 */
 
-				 <STM32F746_PG5_FUNC_FMC_A15_FMC_BA1>, /* FMC_A15 FMC_BA1 */
-				 <STM32F746_PG4_FUNC_FMC_A14_FMC_BA0>, /* FMC_A14 FMC_BA0*/
+				 <STM32_PINMUX('G', 5, AF12)>, /* BA1 */
+				 <STM32_PINMUX('G', 4, AF12)>, /* BA0 */
 
-				 <STM32F746_PG1_FUNC_FMC_A11>, /* FMC_A11 */
-				 <STM32F746_PG0_FUNC_FMC_A10>, /* FMC_A10 */
-				 <STM32F746_PF15_FUNC_FMC_A9>, /* FMC_A9 */
-				 <STM32F746_PF14_FUNC_FMC_A8>, /* FMC_A8 */
-				 <STM32F746_PF13_FUNC_FMC_A7>, /* FMC_A7 */
-				 <STM32F746_PF12_FUNC_FMC_A6>, /* FMC_A6 */
-				 <STM32F746_PF5_FUNC_FMC_A5>,  /* FUNC_FMC_A5 */
-				 <STM32F746_PF4_FUNC_FMC_A4>,  /* FMC_A4 */
-				 <STM32F746_PF3_FUNC_FMC_A3>,  /* FMC_A3 */
-				 <STM32F746_PF2_FUNC_FMC_A2>,  /* FMC_A2 */
-				 <STM32F746_PF1_FUNC_FMC_A1>,  /* FMC_A1 */
-				 <STM32F746_PF0_FUNC_FMC_A0>,  /* FMC_A0 */
+				 <STM32_PINMUX('G', 1, AF12)>, /* A11 */
+				 <STM32_PINMUX('G', 0, AF12)>, /* A10 */
+				 <STM32_PINMUX('F',15, AF12)>, /* A9 */
+				 <STM32_PINMUX('F',14, AF12)>, /* A8 */
+				 <STM32_PINMUX('F',13, AF12)>, /* A7 */
+				 <STM32_PINMUX('F',12, AF12)>, /* A6 */
+				 <STM32_PINMUX('F', 5, AF12)>, /* A5 */
+				 <STM32_PINMUX('F', 4, AF12)>, /* A4 */
+				 <STM32_PINMUX('F', 3, AF12)>, /* A3 */
+				 <STM32_PINMUX('F', 2, AF12)>, /* A2 */
+				 <STM32_PINMUX('F', 1, AF12)>, /* A1 */
+				 <STM32_PINMUX('F', 0, AF12)>, /* A0 */
 
-				 <STM32F746_PH3_FUNC_FMC_SDNE0>,/* FMC_SDNE0 */
-				 <STM32F746_PH5_FUNC_FMC_SDNWE>, /* FMC_SDNWE */
-				 <STM32F746_PF11_FUNC_FMC_SDNRAS>, /* FMC_SDNRAS */
-				 <STM32F746_PG15_FUNC_FMC_SDNCAS>, /* FMC_SDNCAS */
-				 <STM32F746_PH2_FUNC_FMC_SDCKE0>, /* FMC_SDCKE0 */
-				 <STM32F746_PG8_FUNC_FMC_SDCLK>; /* FMC_SDCLK */
+				 <STM32_PINMUX('H', 3, AF12)>, /* SDNE0 */
+				 <STM32_PINMUX('H', 5, AF12)>, /* SDNWE */
+				 <STM32_PINMUX('F',11, AF12)>, /* SDNRAS */
+				 <STM32_PINMUX('G',15, AF12)>, /* SDNCAS */
+				 <STM32_PINMUX('C', 3, AF12)>, /* SDCKE0 */
+				 <STM32_PINMUX('G', 8, AF12)>; /* SDCLK> */
 			slew-rate = <2>;
 		};
 	};
 
 	qspi_pins: qspi@0 {
 		pins {
-			pinmux = <STM32F746_PB2_FUNC_QUADSPI_CLK>,
-				 <STM32F746_PB6_FUNC_QUADSPI_BK1_NCS>,
-				 <STM32F746_PF8_FUNC_QUADSPI_BK1_IO0>,
-				 <STM32F746_PF9_FUNC_QUADSPI_BK1_IO1>,
-				 <STM32F746_PF6_FUNC_QUADSPI_BK1_IO3>,
-				 <STM32F746_PF7_FUNC_QUADSPI_BK1_IO2>;
+			pinmux = <STM32_PINMUX('B', 2, AF9)>, /* _FUNC_QUADSPI_CLK */
+				 <STM32_PINMUX('B', 6, AF10)>, /*_FUNC_QUADSPI_BK1_NCS */
+				 <STM32_PINMUX('F', 8, AF10)>, /* _FUNC_QUADSPI_BK1_IO0 */
+				 <STM32_PINMUX('F', 9, AF10)>, /* _FUNC_QUADSPI_BK1_IO1 */
+				 <STM32_PINMUX('F', 6, AF9)>, /* AF_FUNC_QUADSPI_BK1_IO3 */
+				 <STM32_PINMUX('F', 7, AF9)>; /* _FUNC_QUADSPI_BK1_IO2 */
 			slew-rate = <2>;
 		};
 	};
+
+	usart1_pins_a: usart1@0	{
+		u-boot,dm-pre-reloc;
+		pins1 {
+			u-boot,dm-pre-reloc;
+		};
+		pins2 {
+			u-boot,dm-pre-reloc;
+		};
+	};
 };
 
 &qspi {
diff --git a/arch/arm/dts/stm32746g-eval.dts b/arch/arm/dts/stm32746g-eval.dts
index 94df80f..8c081ea 100644
--- a/arch/arm/dts/stm32746g-eval.dts
+++ b/arch/arm/dts/stm32746g-eval.dts
@@ -1,9 +1,5 @@
 /*
- * Copyright 2018 - Christophe Priouzeau <christophe.priouzeau@st.com>
- *
- * Based on:
- * stm32f746-disco.dts from U-boot 2018.01
- * Copyright 2016 - Lee Jones <lee.jones@linaro.org>
+ * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -46,42 +42,92 @@
 
 /dts-v1/;
 #include "stm32f746.dtsi"
-#include <dt-bindings/memory/stm32-sdram.h>
+#include "stm32f746-pinctrl.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
-	model = "STMicroelectronics STM32F746G-EVAL board";
-	compatible = "st,stm32f746g-eval", "st,stm32f746";
+	model = "STMicroelectronics STM32746g-EVAL board";
+	compatible = "st,stm32746g-eval", "st,stm32f746";
 
 	chosen {
+		bootargs = "root=/dev/ram";
 		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
-		reg = <0xC0000000 0x2000000>;
+		reg = <0xc0000000 0x2000000>;
 	};
 
 	aliases {
 		serial0 = &usart1;
 	};
+
+	leds {
+		compatible = "gpio-leds";
+		green {
+			gpios = <&gpiof 10 1>;
+			linux,default-trigger = "heartbeat";
+		};
+		red {
+			gpios = <&gpiob 7 1>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+		button@0 {
+			label = "Wake up";
+			linux,code = <KEY_WAKEUP>;
+			gpios = <&gpioc 13 0>;
+		};
+	};
+
+	usbotg_hs_phy: usb-phy {
+		#phy-cells = <0>;
+		compatible = "usb-nop-xceiv";
+		clocks = <&rcc 0 STM32F7_AHB1_CLOCK(OTGHSULPI)>;
+		clock-names = "main_clk";
+	};
+
+	mmc_vcard: mmc_vcard {
+		compatible = "regulator-fixed";
+		regulator-name = "mmc_vcard";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 };
 
 &clk_hse {
 	clock-frequency = <25000000>;
 };
 
-&pinctrl {
-	usart1_pins_a: usart1@0	{
-		pins1 {
-			pinmux = <STM32F746_PA9_FUNC_USART1_TX>;
-				bias-disable;
-				drive-push-pull;
-				slew-rate = <2>;
-		};
-		pins2 {
-			pinmux = <STM32F746_PA10_FUNC_USART1_RX>;
-			bias-disable;
-		};
-	};
+&crc {
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins_b>;
+	pinctrl-names = "default";
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sdio1 {
+	status = "okay";
+	vmmc-supply = <&mmc_vcard>;
+	broken-cd;
+	pinctrl-names = "default", "opendrain";
+	pinctrl-0 = <&sdio_pins_a>;
+	pinctrl-1 = <&sdio_pins_od_a>;
+	bus-width = <4>;
 };
 
 &usart1 {
@@ -90,11 +136,11 @@
 	status = "okay";
 };
 
-&sdio {
+&usbotg_hs {
+	dr_mode = "otg";
+	phys = <&usbotg_hs_phy>;
+	phy-names = "usb2-phy";
+	pinctrl-0 = <&usbotg_hs_pins_a>;
+	pinctrl-names = "default";
 	status = "okay";
-	pinctrl-names = "default", "opendrain";
-	pinctrl-0 = <&sdio_pins>;
-	pinctrl-1 = <&sdio_pins_od>;
-	bus-width = <4>;
-	max-frequency = <25000000>;
 };
diff --git a/arch/arm/dts/stm32f7-pinctrl.dtsi b/arch/arm/dts/stm32f7-pinctrl.dtsi
new file mode 100644
index 0000000..9314128
--- /dev/null
+++ b/arch/arm/dts/stm32f7-pinctrl.dtsi
@@ -0,0 +1,289 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Alexandre Torgue  <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+#include <dt-bindings/mfd/stm32f7-rcc.h>
+
+/ {
+	soc {
+		pinctrl: pin-controller {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x40020000 0x3000>;
+			interrupt-parent = <&exti>;
+			st,syscfg = <&syscfg 0x8>;
+			pins-are-numbered;
+
+			gpioa: gpio@40020000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x400>;
+				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOA)>;
+				st,bank-name = "GPIOA";
+			};
+
+			gpiob: gpio@40020400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x400 0x400>;
+				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOB)>;
+				st,bank-name = "GPIOB";
+			};
+
+			gpioc: gpio@40020800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x800 0x400>;
+				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOC)>;
+				st,bank-name = "GPIOC";
+			};
+
+			gpiod: gpio@40020c00 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0xc00 0x400>;
+				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOD)>;
+				st,bank-name = "GPIOD";
+			};
+
+			gpioe: gpio@40021000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x400>;
+				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOE)>;
+				st,bank-name = "GPIOE";
+			};
+
+			gpiof: gpio@40021400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1400 0x400>;
+				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOF)>;
+				st,bank-name = "GPIOF";
+			};
+
+			gpiog: gpio@40021800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1800 0x400>;
+				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOG)>;
+				st,bank-name = "GPIOG";
+			};
+
+			gpioh: gpio@40021c00 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1c00 0x400>;
+				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOH)>;
+				st,bank-name = "GPIOH";
+			};
+
+			gpioi: gpio@40022000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x400>;
+				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOI)>;
+				st,bank-name = "GPIOI";
+			};
+
+			gpioj: gpio@40022400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2400 0x400>;
+				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOJ)>;
+				st,bank-name = "GPIOJ";
+			};
+
+			gpiok: gpio@40022800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2800 0x400>;
+				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOK)>;
+				st,bank-name = "GPIOK";
+			};
+
+			cec_pins_a: cec@0 {
+				pins {
+					pinmux = <STM32_PINMUX('A', 15, AF4)>; /* HDMI CEC */
+					slew-rate = <0>;
+					drive-open-drain;
+					bias-disable;
+				};
+			};
+
+			usart1_pins_a: usart1@0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <0>;
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('A', 10, AF7)>; /* USART1_RX */
+					bias-disable;
+				};
+			};
+
+			usart1_pins_b: usart1@1 {
+				pins1 {
+					pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <0>;
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('B', 7, AF7)>; /* USART1_RX */
+					bias-disable;
+				};
+			};
+
+			i2c1_pins_b: i2c1@0 {
+				pins {
+					pinmux = <STM32_PINMUX('B', 9, AF4)>, /* I2C1 SDA */
+						 <STM32_PINMUX('B', 8, AF4)>; /* I2C1 SCL */
+					bias-disable;
+					drive-open-drain;
+					slew-rate = <0>;
+				};
+			};
+
+			usbotg_hs_pins_a: usbotg-hs@0 {
+				pins {
+					pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT */
+						 <STM32_PINMUX('I', 11, AF10)>, /* OTG_HS_ULPI_DIR */
+						 <STM32_PINMUX('C', 0, AF10)>, /* OTG_HS_ULPI_STP */
+						 <STM32_PINMUX('A', 5, AF10)>, /* OTG_HS_ULPI_CK */
+						 <STM32_PINMUX('A', 3, AF10)>, /* OTG_HS_ULPI_D0 */
+						 <STM32_PINMUX('B', 0, AF10)>, /* OTG_HS_ULPI_D1 */
+						 <STM32_PINMUX('B', 1, AF10)>, /* OTG_HS_ULPI_D2 */
+						 <STM32_PINMUX('B', 10, AF10)>, /* OTG_HS_ULPI_D3 */
+						 <STM32_PINMUX('B', 11, AF10)>, /* OTG_HS_ULPI_D4 */
+						 <STM32_PINMUX('B', 12, AF10)>, /* OTG_HS_ULPI_D5 */
+						 <STM32_PINMUX('B', 13, AF10)>, /* OTG_HS_ULPI_D6 */
+						 <STM32_PINMUX('B', 5, AF10)>; /* OTG_HS_ULPI_D7 */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+			};
+
+			usbotg_hs_pins_b: usbotg-hs@1 {
+				pins {
+					pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT */
+						 <STM32_PINMUX('C', 2, AF10)>, /* OTG_HS_ULPI_DIR */
+						 <STM32_PINMUX('C', 0, AF10)>, /* OTG_HS_ULPI_STP */
+						 <STM32_PINMUX('A', 5, AF10)>, /* OTG_HS_ULPI_CK */
+						 <STM32_PINMUX('A', 3, AF10)>, /* OTG_HS_ULPI_D0 */
+						 <STM32_PINMUX('B', 0, AF10)>, /* OTG_HS_ULPI_D1 */
+						 <STM32_PINMUX('B', 1, AF10)>, /* OTG_HS_ULPI_D2 */
+						 <STM32_PINMUX('B', 10, AF10)>, /* OTG_HS_ULPI_D3 */
+						 <STM32_PINMUX('B', 11, AF10)>, /* OTG_HS_ULPI_D4 */
+						 <STM32_PINMUX('B', 12, AF10)>, /* OTG_HS_ULPI_D5 */
+						 <STM32_PINMUX('B', 13, AF10)>, /* OTG_HS_ULPI_D6 */
+						 <STM32_PINMUX('B', 5, AF10)>; /* OTG_HS_ULPI_D7 */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+			};
+
+			usbotg_fs_pins_a: usbotg-fs@0 {
+				pins {
+					pinmux = <STM32_PINMUX('A', 10, AF10)>, /* OTG_FS_ID */
+						 <STM32_PINMUX('A', 11, AF10)>, /* OTG_FS_DM */
+						 <STM32_PINMUX('A', 12, AF10)>; /* OTG_FS_DP */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+			};
+
+			sdio_pins_a: sdio_pins_a@0 {
+				pins {
+					pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1 D0 */
+						 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1 D1 */
+						 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1 D2 */
+						 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1 D3 */
+						 <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1 CLK */
+						 <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1 CMD */
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+			};
+
+			sdio_pins_od_a: sdio_pins_od_a@0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1 D0 */
+						 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1 D1 */
+						 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1 D2 */
+						 <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1 D3 */
+						 <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1 CLK */
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+
+				pins2 {
+					pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1 CMD */
+					drive-open-drain;
+					slew-rate = <2>;
+				};
+			};
+
+			sdio_pins_b: sdio_pins_b@0 {
+				pins {
+					pinmux = <STM32_PINMUX('G', 9, AF11)>, /* SDMMC2 D0 */
+						 <STM32_PINMUX('G', 10, AF11)>, /* SDMMC2 D1 */
+						 <STM32_PINMUX('B', 3, AF10)>, /* SDMMC2 D2 */
+						 <STM32_PINMUX('B', 4, AF10)>, /* SDMMC2 D3 */
+						 <STM32_PINMUX('D', 6, AF11)>, /* SDMMC2 CLK */
+						 <STM32_PINMUX('D', 7, AF11)>; /* SDMMC2 CMD */
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+			};
+
+			sdio_pins_od_b: sdio_pins_od_b@0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('G', 9, AF11)>, /* SDMMC2 D0 */
+						 <STM32_PINMUX('G', 10, AF11)>, /* SDMMC2 D1 */
+						 <STM32_PINMUX('B', 3, AF10)>, /* SDMMC2 D2 */
+						 <STM32_PINMUX('B', 4, AF10)>, /* SDMMC2 D3 */
+						 <STM32_PINMUX('D', 6, AF11)>; /* SDMMC2 CLK */
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+
+				pins2 {
+					pinmux = <STM32_PINMUX('D', 7, AF11)>; /* SDMMC2 CMD */
+					drive-open-drain;
+					slew-rate = <2>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/dts/stm32f7-u-boot.dtsi b/arch/arm/dts/stm32f7-u-boot.dtsi
index cf0cc3b..7816b79 100644
--- a/arch/arm/dts/stm32f7-u-boot.dtsi
+++ b/arch/arm/dts/stm32f7-u-boot.dtsi
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0+
 
+#include <dt-bindings/memory/stm32-sdram.h>
 /{
 	soc {
 		u-boot,dm-pre-reloc;
@@ -126,16 +127,6 @@
 		 u-boot,dm-pre-reloc;
 		};
 	};
-
-	usart1_pins_a: usart1@0	{
-		u-boot,dm-pre-reloc;
-		pins1 {
-			u-boot,dm-pre-reloc;
-		};
-		pins2 {
-			u-boot,dm-pre-reloc;
-		};
-	};
 };
 
 &pwrcfg {
diff --git a/arch/arm/dts/stm32f746-disco-u-boot.dtsi b/arch/arm/dts/stm32f746-disco-u-boot.dtsi
index ceab5e5..bc337b1 100644
--- a/arch/arm/dts/stm32f746-disco-u-boot.dtsi
+++ b/arch/arm/dts/stm32f746-disco-u-boot.dtsi
@@ -19,7 +19,7 @@
 		gpio8 = &gpioi;
 		gpio9 = &gpioj;
 		gpio10 = &gpiok;
-		mmc0 = &sdio;
+		mmc0 = &sdio1;
 		spi0 = &qspi;
 	};
 
@@ -109,15 +109,15 @@
 &pinctrl {
 	ethernet_mii: mii@0 {
 		pins {
-			pinmux = <STM32F746_PG13_FUNC_ETH_MII_TXD0_ETH_RMII_TXD0>,
-				 <STM32F746_PG14_FUNC_ETH_MII_TXD1_ETH_RMII_TXD1>,
-				 <STM32F746_PG11_FUNC_ETH_MII_TX_EN_ETH_RMII_TX_EN>,
-				 <STM32F746_PA2_FUNC_ETH_MDIO>,
-				 <STM32F746_PC1_FUNC_ETH_MDC>,
-				 <STM32F746_PA1_FUNC_ETH_MII_RX_CLK_ETH_RMII_REF_CLK>,
-				 <STM32F746_PA7_FUNC_ETH_MII_RX_DV_ETH_RMII_CRS_DV>,
-				 <STM32F746_PC4_FUNC_ETH_MII_RXD0_ETH_RMII_RXD0>,
-				 <STM32F746_PC5_FUNC_ETH_MII_RXD1_ETH_RMII_RXD1>;
+			pinmux = <STM32_PINMUX('G',13, AF11)>, /* ETH_RMII_TXD0 */
+				 <STM32_PINMUX('G',14, AF11)>, /* ETH_RMII_TXD1 */
+				 <STM32_PINMUX('G',11, AF11)>, /* ETH_RMII_TX_EN */
+				 <STM32_PINMUX('A', 2, AF11)>, /* ETH_MDIO */
+				 <STM32_PINMUX('C', 1, AF11)>, /* ETH_MDC */
+				 <STM32_PINMUX('A', 1, AF11)>, /* ETH_RMII_REF_CLK */
+				 <STM32_PINMUX('A', 7, AF11)>, /* ETH_RMII_CRS_DV */
+				 <STM32_PINMUX('C', 4, AF11)>, /* ETH_RMII_RXD0 */
+				 <STM32_PINMUX('C', 5, AF11)>; /* ETH_RMII_RXD1 */
 			slew-rate = <2>;
 		};
 	};
@@ -126,99 +126,99 @@
 		u-boot,dm-pre-reloc;
 		pins {
 			u-boot,dm-pre-reloc;
-			pinmux = <STM32F746_PD10_FUNC_FMC_D15>,
-				 <STM32F746_PD9_FUNC_FMC_D14>,
-				 <STM32F746_PD8_FUNC_FMC_D13>,
-				 <STM32F746_PE15_FUNC_FMC_D12>,
-				 <STM32F746_PE14_FUNC_FMC_D11>,
-				 <STM32F746_PE13_FUNC_FMC_D10>,
-				 <STM32F746_PE12_FUNC_FMC_D9>,
-				 <STM32F746_PE11_FUNC_FMC_D8>,
-				 <STM32F746_PE10_FUNC_FMC_D7>,
-				 <STM32F746_PE9_FUNC_FMC_D6>,
-				 <STM32F746_PE8_FUNC_FMC_D5>,
-				 <STM32F746_PE7_FUNC_FMC_D4>,
-				 <STM32F746_PD1_FUNC_FMC_D3>,
-				 <STM32F746_PD0_FUNC_FMC_D2>,
-				 <STM32F746_PD15_FUNC_FMC_D1>,
-				 <STM32F746_PD14_FUNC_FMC_D0>,
+			pinmux = <STM32_PINMUX('D',10, AF12)>, /* D15 */
+				 <STM32_PINMUX('D', 9, AF12)>, /* D14 */
+				 <STM32_PINMUX('D', 8, AF12)>, /* D13 */
+				 <STM32_PINMUX('E',15, AF12)>, /* D12 */
+				 <STM32_PINMUX('E',14, AF12)>, /* D11 */
+				 <STM32_PINMUX('E',13, AF12)>, /* D10 */
+				 <STM32_PINMUX('E',12, AF12)>, /* D9 */
+				 <STM32_PINMUX('E',11, AF12)>, /* D8 */
+				 <STM32_PINMUX('E',10, AF12)>, /* D7 */
+				 <STM32_PINMUX('E', 9, AF12)>, /* D6 */
+				 <STM32_PINMUX('E', 8, AF12)>, /* D5 */
+				 <STM32_PINMUX('E', 7, AF12)>, /* D4 */
+				 <STM32_PINMUX('D', 1, AF12)>, /* D3 */
+				 <STM32_PINMUX('D', 0, AF12)>, /* D2 */
+				 <STM32_PINMUX('D',15, AF12)>, /* D1 */
+				 <STM32_PINMUX('D',14, AF12)>, /* D0 */
 
-				 <STM32F746_PE1_FUNC_FMC_NBL1>,
-				 <STM32F746_PE0_FUNC_FMC_NBL0>,
+				 <STM32_PINMUX('E', 1, AF12)>, /* NBL1 */
+				 <STM32_PINMUX('E', 0, AF12)>, /* NBL0 */
 
-				 <STM32F746_PG5_FUNC_FMC_A15_FMC_BA1>,
-				 <STM32F746_PG4_FUNC_FMC_A14_FMC_BA0>,
+				 <STM32_PINMUX('G', 5, AF12)>, /* BA1 */
+				 <STM32_PINMUX('G', 4, AF12)>, /* BA0 */
 
-				 <STM32F746_PG1_FUNC_FMC_A11>,
-				 <STM32F746_PG0_FUNC_FMC_A10>,
-				 <STM32F746_PF15_FUNC_FMC_A9>,
-				 <STM32F746_PF14_FUNC_FMC_A8>,
-				 <STM32F746_PF13_FUNC_FMC_A7>,
-				 <STM32F746_PF12_FUNC_FMC_A6>,
-				 <STM32F746_PF5_FUNC_FMC_A5>,
-				 <STM32F746_PF4_FUNC_FMC_A4>,
-				 <STM32F746_PF3_FUNC_FMC_A3>,
-				 <STM32F746_PF2_FUNC_FMC_A2>,
-				 <STM32F746_PF1_FUNC_FMC_A1>,
-				 <STM32F746_PF0_FUNC_FMC_A0>,
+				 <STM32_PINMUX('G', 1, AF12)>, /* A11 */
+				 <STM32_PINMUX('G', 0, AF12)>, /* A10 */
+				 <STM32_PINMUX('F',15, AF12)>, /* A9 */
+				 <STM32_PINMUX('F',14, AF12)>, /* A8 */
+				 <STM32_PINMUX('F',13, AF12)>, /* A7 */
+				 <STM32_PINMUX('F',12, AF12)>, /* A6 */
+				 <STM32_PINMUX('F', 5, AF12)>, /* A5 */
+				 <STM32_PINMUX('F', 4, AF12)>, /* A4 */
+				 <STM32_PINMUX('F', 3, AF12)>, /* A3 */
+				 <STM32_PINMUX('F', 2, AF12)>, /* A2 */
+				 <STM32_PINMUX('F', 1, AF12)>, /* A1 */
+				 <STM32_PINMUX('F', 0, AF12)>, /* A0 */
 
-				 <STM32F746_PH3_FUNC_FMC_SDNE0>,
-				 <STM32F746_PH5_FUNC_FMC_SDNWE>,
-				 <STM32F746_PF11_FUNC_FMC_SDNRAS>,
-				 <STM32F746_PG15_FUNC_FMC_SDNCAS>,
-				 <STM32F746_PC3_FUNC_FMC_SDCKE0>,
-				 <STM32F746_PG8_FUNC_FMC_SDCLK>;
+				 <STM32_PINMUX('H', 3, AF12)>, /* SDNE0 */
+				 <STM32_PINMUX('H', 5, AF12)>, /* SDNWE */
+				 <STM32_PINMUX('F',11, AF12)>, /* SDNRAS */
+				 <STM32_PINMUX('G',15, AF12)>, /* SDNCAS */
+				 <STM32_PINMUX('C', 3, AF12)>, /* SDCKE0 */
+				 <STM32_PINMUX('G', 8, AF12)>; /* SDCLK> */
 			slew-rate = <2>;
 		};
 	};
 
 	ltdc_pins: ltdc@0 {
 		pins {
-			pinmux = <STM32F746_PE4_FUNC_LCD_B0>,
-				 <STM32F746_PG12_FUNC_LCD_B4>,
-				 <STM32F746_PI9_FUNC_LCD_VSYNC>,
-				 <STM32F746_PI10_FUNC_LCD_HSYNC>,
-				 <STM32F746_PI14_FUNC_LCD_CLK>,
-				 <STM32F746_PI15_FUNC_LCD_R0>,
-				 <STM32F746_PJ0_FUNC_LCD_R1>,
-				 <STM32F746_PJ1_FUNC_LCD_R2>,
-				 <STM32F746_PJ2_FUNC_LCD_R3>,
-				 <STM32F746_PJ3_FUNC_LCD_R4>,
-				 <STM32F746_PJ4_FUNC_LCD_R5>,
-				 <STM32F746_PJ5_FUNC_LCD_R6>,
-				 <STM32F746_PJ6_FUNC_LCD_R7>,
-				 <STM32F746_PJ7_FUNC_LCD_G0>,
-				 <STM32F746_PJ8_FUNC_LCD_G1>,
-				 <STM32F746_PJ9_FUNC_LCD_G2>,
-				 <STM32F746_PJ10_FUNC_LCD_G3>,
-				 <STM32F746_PJ11_FUNC_LCD_G4>,
-				 <STM32F746_PJ13_FUNC_LCD_B1>,
-				 <STM32F746_PJ14_FUNC_LCD_B2>,
-				 <STM32F746_PJ15_FUNC_LCD_B3>,
-				 <STM32F746_PK0_FUNC_LCD_G5>,
-				 <STM32F746_PK1_FUNC_LCD_G6>,
-				 <STM32F746_PK2_FUNC_LCD_G7>,
-				 <STM32F746_PK4_FUNC_LCD_B5>,
-				 <STM32F746_PK5_FUNC_LCD_B6>,
-				 <STM32F746_PK6_FUNC_LCD_B7>,
-				 <STM32F746_PK7_FUNC_LCD_DE>;
+			pinmux = <STM32_PINMUX('E', 4, AF14)>, /* B0 */
+				 <STM32_PINMUX('G',12, AF14)>, /* B4 */
+				 <STM32_PINMUX('I', 9, AF14)>, /* VSYNC */
+				 <STM32_PINMUX('I',10, AF14)>, /* HSYNC */
+				 <STM32_PINMUX('I',14, AF14)>, /* CLK */
+				 <STM32_PINMUX('I',15, AF14)>, /* R0 */
+				 <STM32_PINMUX('J', 0, AF14)>, /* R1 */
+				 <STM32_PINMUX('J', 1, AF14)>, /* R2 */
+				 <STM32_PINMUX('J', 2, AF14)>, /* R3 */
+				 <STM32_PINMUX('J', 3, AF14)>, /* R4 */
+				 <STM32_PINMUX('J', 4, AF14)>, /* R5 */
+				 <STM32_PINMUX('J', 5, AF14)>, /* R6 */
+				 <STM32_PINMUX('J', 6, AF14)>, /* R7 */
+				 <STM32_PINMUX('J', 7, AF14)>, /* G0 */
+				 <STM32_PINMUX('J', 8, AF14)>, /* G1 */
+				 <STM32_PINMUX('J', 9, AF14)>, /* G2 */
+				 <STM32_PINMUX('J',10, AF14)>, /* G3 */
+				 <STM32_PINMUX('J',11, AF14)>, /* G4 */
+				 <STM32_PINMUX('J',13, AF14)>, /* B1 */
+				 <STM32_PINMUX('J',14, AF14)>, /* B2 */
+				 <STM32_PINMUX('J',15, AF14)>, /* B3 */
+				 <STM32_PINMUX('K', 0, AF14)>, /* G5 */
+				 <STM32_PINMUX('K', 1, AF14)>, /* G6 */
+				 <STM32_PINMUX('K', 2, AF14)>, /* G7 */
+				 <STM32_PINMUX('K', 4, AF14)>, /* B5 */
+				 <STM32_PINMUX('K', 5, AF14)>, /* B6 */
+				 <STM32_PINMUX('K', 6, AF14)>, /* B7 */
+				 <STM32_PINMUX('K', 7, AF14)>; /* DE */
 			slew-rate = <2>;
 		};
 	};
 
 	qspi_pins: qspi@0 {
 		pins {
-			pinmux = <STM32F746_PB2_FUNC_QUADSPI_CLK>,
-				<STM32F746_PB6_FUNC_QUADSPI_BK1_NCS>,
-				<STM32F746_PD11_FUNC_QUADSPI_BK1_IO0>,
-				<STM32F746_PD12_FUNC_QUADSPI_BK1_IO1>,
-				<STM32F746_PD13_FUNC_QUADSPI_BK1_IO3>,
-				<STM32F746_PE2_FUNC_QUADSPI_BK1_IO2>;
+			pinmux = <STM32_PINMUX('B', 2, AF9)>, /* CLK */
+				 <STM32_PINMUX('B', 6, AF10)>, /* BK1_NCS */
+				 <STM32_PINMUX('D',11, AF9)>, /* BK1_IO0 */
+				 <STM32_PINMUX('D',12, AF9)>, /* BK1_IO1 */
+				 <STM32_PINMUX('D',13, AF9)>, /* BK1_IO3 */
+				 <STM32_PINMUX('E', 2, AF9)>; /* BK1_IO2 */
 			slew-rate = <2>;
 		};
 	};
 
-	usart1_pins_a: usart1@0	{
+	usart1_pins_b: usart1@1	{
 		u-boot,dm-pre-reloc;
 		pins1 {
 			u-boot,dm-pre-reloc;
diff --git a/arch/arm/dts/stm32f746-disco.dts b/arch/arm/dts/stm32f746-disco.dts
index d568765..e3a7bd3 100644
--- a/arch/arm/dts/stm32f746-disco.dts
+++ b/arch/arm/dts/stm32f746-disco.dts
@@ -1,10 +1,5 @@
 /*
- * Copyright 2016 - Michael Kurz <michi.kurz@gmail.com>
- * Copyright 2016 - Vikas MANOCHA <vikas.manocha@st.com>
- *
- * Based on:
- * stm32f469-disco.dts from Linux
- * Copyright 2016 - Lee Jones <lee.jones@linaro.org>
+ * Copyright 2017 - Vikas MANOCHA <vikas.manocha@st.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -47,7 +42,8 @@
 
 /dts-v1/;
 #include "stm32f746.dtsi"
-#include <dt-bindings/memory/stm32-sdram.h>
+#include "stm32f746-pinctrl.dtsi"
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
 
 / {
@@ -55,7 +51,7 @@
 	compatible = "st,stm32f746-disco", "st,stm32f746";
 
 	chosen {
-		bootargs = "root=/dev/ram rdinit=/linuxrc";
+		bootargs = "root=/dev/ram";
 		stdout-path = "serial0:115200n8";
 	};
 
@@ -67,39 +63,69 @@
 		serial0 = &usart1;
 	};
 
+	usbotg_hs_phy: usb-phy {
+		#phy-cells = <0>;
+		compatible = "usb-nop-xceiv";
+		clocks = <&rcc 0 STM32F7_AHB1_CLOCK(OTGHSULPI)>;
+		clock-names = "main_clk";
+	};
+
+	/* This turns on vbus for otg fs for host mode (dwc2) */
+	vcc5v_otg_fs: vcc5v-otg-fs-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpiod 5 0>;
+		regulator-name = "vcc5_host1";
+		regulator-always-on;
+	};
+
+	mmc_vcard: mmc_vcard {
+		compatible = "regulator-fixed";
+		regulator-name = "mmc_vcard";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 };
 
 &clk_hse {
 	clock-frequency = <25000000>;
 };
 
-&pinctrl {
-	usart1_pins_a: usart1@0	{
-		pins1 {
-		       pinmux = <STM32F746_PA9_FUNC_USART1_TX>;
-				bias-disable;
-				drive-push-pull;
-				slew-rate = <2>;
-		};
-		pins2 {
-			pinmux = <STM32F746_PB7_FUNC_USART1_RX>;
-			bias-disable;
-		};
-	};
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins_b>;
+	pinctrl-names = "default";
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+};
+
+&sdio1 {
+	status = "okay";
+	vmmc-supply = <&mmc_vcard>;
+	cd-gpios = <&gpioc 13 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default", "opendrain";
+	pinctrl-0 = <&sdio_pins_a>;
+	pinctrl-1 = <&sdio_pins_od_a>;
+	bus-width = <4>;
 };
 
 &usart1 {
-	pinctrl-0 = <&usart1_pins_a>;
+	pinctrl-0 = <&usart1_pins_b>;
 	pinctrl-names = "default";
 	status = "okay";
 };
 
-&sdio {
+&usbotg_fs {
+	dr_mode = "host";
+	pinctrl-0 = <&usbotg_fs_pins_a>;
+	pinctrl-names = "default";
 	status = "okay";
-	cd-gpios = <&gpioc 13 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default", "opendrain";
-	pinctrl-0 = <&sdio_pins>;
-	pinctrl-1 = <&sdio_pins_od>;
-	bus-width = <4>;
-	max-frequency = <25000000>;
+};
+
+&usbotg_hs {
+	dr_mode = "host";
+	phys = <&usbotg_hs_phy>;
+	phy-names = "usb2-phy";
+	pinctrl-0 = <&usbotg_hs_pins_b>;
+	pinctrl-names = "default";
+	status = "okay";
 };
diff --git a/arch/arm/dts/stm32f746-pinctrl.dtsi b/arch/arm/dts/stm32f746-pinctrl.dtsi
new file mode 100644
index 0000000..fcfd2ac
--- /dev/null
+++ b/arch/arm/dts/stm32f746-pinctrl.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Alexandre Torgue  <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+#include "stm32f7-pinctrl.dtsi"
+
+&pinctrl{
+	compatible = "st,stm32f746-pinctrl";
+};
diff --git a/arch/arm/dts/stm32f746.dtsi b/arch/arm/dts/stm32f746.dtsi
index 7209864..f48d06a 100644
--- a/arch/arm/dts/stm32f746.dtsi
+++ b/arch/arm/dts/stm32f746.dtsi
@@ -1,9 +1,4 @@
 /*
- * Copyright 2016 - Michael Kurz <michi.kurz@gmail.com>
- * Copyright 2016 - Vikas MANOCHA <vikas.manocha@st.com>
- *
- * Based on:
- * stm32f429.dtsi from Linux
  * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com>
  *
  * This file is dual-licensed: you can use it either under the terms
@@ -45,8 +40,8 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
+#include "skeleton.dtsi"
 #include "armv7-m.dtsi"
-#include <dt-bindings/pinctrl/stm32f746-pinfunc.h>
 #include <dt-bindings/clock/stm32fx-clock.h>
 #include <dt-bindings/mfd/stm32f7-rcc.h>
 
@@ -57,223 +52,112 @@
 			compatible = "fixed-clock";
 			clock-frequency = <0>;
 		};
+
+		clk-lse {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		clk-lsi {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+		};
+
+		clk_i2s_ckin: clk-i2s-ckin {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <48000000>;
+		};
 	};
 
 	soc {
-		usart1: serial@40011000 {
-			compatible = "st,stm32f7-usart", "st,stm32f7-uart";
-			reg = <0x40011000 0x400>;
-			interrupts = <37>;
-			clocks = <&rcc 0 STM32F7_APB2_CLOCK(USART1)>;
+		timer2: timer@40000000 {
+			compatible = "st,stm32-timer";
+			reg = <0x40000000 0x400>;
+			interrupts = <28>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM2)>;
 			status = "disabled";
 		};
 
-		pwrcfg: power-config@58024800 {
-			compatible = "syscon";
-			reg = <0x40007000 0x400>;
-		};
-
-		rcc: rcc@40023810 {
-			#reset-cells = <1>;
-			#clock-cells = <2>;
-			compatible = "st,stm32f746-rcc", "st,stm32-rcc";
-			reg = <0x40023800 0x400>;
-			clocks = <&clk_hse>;
-			st,syscfg = <&pwrcfg>;
-		};
-
-		pinctrl: pin-controller {
+		timers2: timers@40000000 {
 			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "st,stm32f746-pinctrl";
-			ranges = <0 0x40020000 0x3000>;
-			pins-are-numbered;
-
-			gpioa: gpio@40020000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				compatible = "st,stm32-gpio";
-				reg = <0x0 0x400>;
-				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOA)>;
-				st,bank-name = "GPIOA";
-			};
-
-			gpiob: gpio@40020400 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				compatible = "st,stm32-gpio";
-				reg = <0x400 0x400>;
-				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOB)>;
-				st,bank-name = "GPIOB";
-			};
-
-
-			gpioc: gpio@40020800 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				compatible = "st,stm32-gpio";
-				reg = <0x800 0x400>;
-				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOC)>;
-				st,bank-name = "GPIOC";
-			};
-
-			gpiod: gpio@40020c00 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				compatible = "st,stm32-gpio";
-				reg = <0xc00 0x400>;
-				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOD)>;
-				st,bank-name = "GPIOD";
-			};
-
-			gpioe: gpio@40021000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				compatible = "st,stm32-gpio";
-				reg = <0x1000 0x400>;
-				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOE)>;
-				st,bank-name = "GPIOE";
-			};
-
-			gpiof: gpio@40021400 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				compatible = "st,stm32-gpio";
-				reg = <0x1400 0x400>;
-				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOF)>;
-				st,bank-name = "GPIOF";
-			};
-
-			gpiog: gpio@40021800 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				compatible = "st,stm32-gpio";
-				reg = <0x1800 0x400>;
-				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOG)>;
-				st,bank-name = "GPIOG";
-			};
-
-			gpioh: gpio@40021c00 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				compatible = "st,stm32-gpio";
-				reg = <0x1c00 0x400>;
-				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOH)>;
-				st,bank-name = "GPIOH";
-			};
-
-			gpioi: gpio@40022000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				compatible = "st,stm32-gpio";
-				reg = <0x2000 0x400>;
-				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOI)>;
-				st,bank-name = "GPIOI";
-			};
-
-			gpioj: gpio@40022400 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				compatible = "st,stm32-gpio";
-				reg = <0x2400 0x400>;
-				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOJ)>;
-				st,bank-name = "GPIOJ";
-			};
-
-			gpiok: gpio@40022800 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				compatible = "st,stm32-gpio";
-				reg = <0x2800 0x400>;
-				clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOK)>;
-				st,bank-name = "GPIOK";
-			};
-
-			sdio_pins: sdio_pins@0 {
-				pins {
-					pinmux = <STM32F746_PC8_FUNC_SDMMC1_D0>,
-						 <STM32F746_PC9_FUNC_SDMMC1_D1>,
-						 <STM32F746_PC10_FUNC_SDMMC1_D2>,
-						 <STM32F746_PC11_FUNC_SDMMC1_D3>,
-						 <STM32F746_PC12_FUNC_SDMMC1_CK>,
-						 <STM32F746_PD2_FUNC_SDMMC1_CMD>;
-					drive-push-pull;
-					slew-rate = <2>;
-				};
-			};
-
-			sdio_pins_od: sdio_pins_od@0 {
-				pins1 {
-					pinmux = <STM32F746_PC8_FUNC_SDMMC1_D0>,
-						 <STM32F746_PC9_FUNC_SDMMC1_D1>,
-						 <STM32F746_PC10_FUNC_SDMMC1_D2>,
-						 <STM32F746_PC11_FUNC_SDMMC1_D3>,
-						 <STM32F746_PC12_FUNC_SDMMC1_CK>;
-					drive-push-pull;
-					slew-rate = <2>;
-				};
-
-				pins2 {
-					pinmux = <STM32F746_PD2_FUNC_SDMMC1_CMD>;
-					drive-open-drain;
-					slew-rate = <2>;
-				};
-			};
-
-			sdio_pins_b: sdio_pins_b@0 {
-				pins {
-					pinmux = <STM32F769_PG9_FUNC_SDMMC2_D0>,
-						 <STM32F769_PG10_FUNC_SDMMC2_D1>,
-						 <STM32F769_PB3_FUNC_SDMMC2_D2>,
-						 <STM32F769_PB4_FUNC_SDMMC2_D3>,
-						 <STM32F769_PD6_FUNC_SDMMC2_CLK>,
-						 <STM32F769_PD7_FUNC_SDMMC2_CMD>;
-					drive-push-pull;
-					slew-rate = <2>;
-				};
-			};
-
-			sdio_pins_od_b: sdio_pins_od_b@0 {
-				pins1 {
-					pinmux = <STM32F769_PG9_FUNC_SDMMC2_D0>,
-						 <STM32F769_PG10_FUNC_SDMMC2_D1>,
-						 <STM32F769_PB3_FUNC_SDMMC2_D2>,
-						 <STM32F769_PB4_FUNC_SDMMC2_D3>,
-						 <STM32F769_PD6_FUNC_SDMMC2_CLK>;
-					drive-push-pull;
-					slew-rate = <2>;
-				};
-
-				pins2 {
-					pinmux = <STM32F769_PD7_FUNC_SDMMC2_CMD>;
-					drive-open-drain;
-					slew-rate = <2>;
-				};
-			};
-
-		};
-		sdio: sdio@40012c00 {
-			compatible = "st,stm32f4xx-sdio";
-			reg = <0x40012c00 0x400>;
-			clocks = <&rcc 0 171>;
-			interrupts = <49>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40000000 0x400>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM2)>;
+			clock-names = "int";
 			status = "disabled";
-			pinctrl-0 = <&sdio_pins>;
-			pinctrl-1 = <&sdio_pins_od>;
-			pinctrl-names = "default", "opendrain";
-			max-frequency = <48000000>;
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				status = "disabled";
+			};
+
+			timer@1 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <1>;
+				status = "disabled";
+			};
 		};
 
-		sdio2: sdio2@40011c00 {
-			compatible = "st,stm32f4xx-sdio";
-			reg = <0x40011c00 0x400>;
-			clocks = <&rcc 0 167>;
-			interrupts = <103>;
+		timer3: timer@40000400 {
+			compatible = "st,stm32-timer";
+			reg = <0x40000400 0x400>;
+			interrupts = <29>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM3)>;
 			status = "disabled";
-			pinctrl-0 = <&sdio_pins_b>;
-			pinctrl-1 = <&sdio_pins_od_b>;
-			pinctrl-names = "default", "opendrain";
-			max-frequency = <48000000>;
+		};
+
+		timers3: timers@40000400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40000400 0x400>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM3)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				status = "disabled";
+			};
+
+			timer@2 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <2>;
+				status = "disabled";
+			};
+		};
+
+		timer4: timer@40000800 {
+			compatible = "st,stm32-timer";
+			reg = <0x40000800 0x400>;
+			interrupts = <30>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM4)>;
+			status = "disabled";
+		};
+
+		timers4: timers@40000800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40000800 0x400>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM4)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				status = "disabled";
+			};
+
+			timer@3 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <3>;
+				status = "disabled";
+			};
 		};
 
 		timer5: timer@40000c00 {
@@ -282,9 +166,470 @@
 			interrupts = <50>;
 			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM5)>;
 		};
+
+		timers5: timers@40000c00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40000C00 0x400>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM5)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				status = "disabled";
+			};
+
+			timer@4 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <4>;
+				status = "disabled";
+			};
+		};
+
+		timer6: timer@40001000 {
+			compatible = "st,stm32-timer";
+			reg = <0x40001000 0x400>;
+			interrupts = <54>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM6)>;
+			status = "disabled";
+		};
+
+		timers6: timers@40001000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40001000 0x400>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM6)>;
+			clock-names = "int";
+			status = "disabled";
+
+			timer@5 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <5>;
+				status = "disabled";
+			};
+		};
+
+		timer7: timer@40001400 {
+			compatible = "st,stm32-timer";
+			reg = <0x40001400 0x400>;
+			interrupts = <55>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM7)>;
+			status = "disabled";
+		};
+
+		timers7: timers@40001400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40001400 0x400>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM7)>;
+			clock-names = "int";
+			status = "disabled";
+
+			timer@6 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <6>;
+				status = "disabled";
+			};
+		};
+
+		timers12: timers@40001800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40001800 0x400>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM12)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				status = "disabled";
+			};
+
+			timer@11 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <11>;
+				status = "disabled";
+			};
+		};
+
+		timers13: timers@40001c00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40001C00 0x400>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM13)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				status = "disabled";
+			};
+		};
+
+		timers14: timers@40002000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40002000 0x400>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM14)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				status = "disabled";
+			};
+		};
+
+		rtc: rtc@40002800 {
+			compatible = "st,stm32-rtc";
+			reg = <0x40002800 0x400>;
+			clocks = <&rcc 1 CLK_RTC>;
+			clock-names = "ck_rtc";
+			assigned-clocks = <&rcc 1 CLK_RTC>;
+			assigned-clock-parents = <&rcc 1 CLK_LSE>;
+			interrupt-parent = <&exti>;
+			interrupts = <17 1>;
+			interrupt-names = "alarm";
+			st,syscfg = <&pwrcfg 0x00 0x100>;
+			status = "disabled";
+		};
+
+		usart2: serial@40004400 {
+			compatible = "st,stm32f7-uart";
+			reg = <0x40004400 0x400>;
+			interrupts = <38>;
+			clocks = <&rcc 1 CLK_USART2>;
+			status = "disabled";
+		};
+
+		usart3: serial@40004800 {
+			compatible = "st,stm32f7-uart";
+			reg = <0x40004800 0x400>;
+			interrupts = <39>;
+			clocks = <&rcc 1 CLK_USART3>;
+			status = "disabled";
+		};
+
+		usart4: serial@40004c00 {
+			compatible = "st,stm32f7-uart";
+			reg = <0x40004c00 0x400>;
+			interrupts = <52>;
+			clocks = <&rcc 1 CLK_UART4>;
+			status = "disabled";
+		};
+
+		usart5: serial@40005000 {
+			compatible = "st,stm32f7-uart";
+			reg = <0x40005000 0x400>;
+			interrupts = <53>;
+			clocks = <&rcc 1 CLK_UART5>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@40005400 {
+			compatible = "st,stm32f7-i2c";
+			reg = <0x40005400 0x400>;
+			interrupts = <31>,
+				     <32>;
+			resets = <&rcc STM32F7_APB1_RESET(I2C1)>;
+			clocks = <&rcc 1 CLK_I2C1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@40005800 {
+			compatible = "st,stm32f7-i2c";
+			reg = <0x40005800 0x400>;
+			interrupts = <33>,
+				     <34>;
+			resets = <&rcc STM32F7_APB1_RESET(I2C2)>;
+			clocks = <&rcc 1 CLK_I2C2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@40005C00 {
+			compatible = "st,stm32f7-i2c";
+			reg = <0x40005C00 0x400>;
+			interrupts = <72>,
+				     <73>;
+			resets = <&rcc STM32F7_APB1_RESET(I2C3)>;
+			clocks = <&rcc 1 CLK_I2C3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@40006000 {
+			compatible = "st,stm32f7-i2c";
+			reg = <0x40006000 0x400>;
+			interrupts = <95>,
+				     <96>;
+			resets = <&rcc STM32F7_APB1_RESET(I2C4)>;
+			clocks = <&rcc 1 CLK_I2C4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		cec: cec@40006c00 {
+			compatible = "st,stm32-cec";
+			reg = <0x40006C00 0x400>;
+			interrupts = <94>;
+			clocks = <&rcc 0 STM32F7_APB1_CLOCK(CEC)>, <&rcc 1 CLK_HDMI_CEC>;
+			clock-names = "cec", "hdmi-cec";
+			status = "disabled";
+		};
+
+		usart7: serial@40007800 {
+			compatible = "st,stm32f7-uart";
+			reg = <0x40007800 0x400>;
+			interrupts = <82>;
+			clocks = <&rcc 1 CLK_UART7>;
+			status = "disabled";
+		};
+
+		usart8: serial@40007c00 {
+			compatible = "st,stm32f7-uart";
+			reg = <0x40007c00 0x400>;
+			interrupts = <83>;
+			clocks = <&rcc 1 CLK_UART8>;
+			status = "disabled";
+		};
+
+		timers1: timers@40010000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40010000 0x400>;
+			clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM1)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				status = "disabled";
+			};
+
+			timer@0 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <0>;
+				status = "disabled";
+			};
+		};
+
+		timers8: timers@40010400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40010400 0x400>;
+			clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM8)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				status = "disabled";
+			};
+
+			timer@7 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <7>;
+				status = "disabled";
+			};
+		};
+
+		usart1: serial@40011000 {
+			compatible = "st,stm32f7-uart";
+			reg = <0x40011000 0x400>;
+			interrupts = <37>;
+			clocks = <&rcc 1 CLK_USART1>;
+			status = "disabled";
+		};
+
+		usart6: serial@40011400 {
+			compatible = "st,stm32f7-uart";
+			reg = <0x40011400 0x400>;
+			interrupts = <71>;
+			clocks = <&rcc 1 CLK_USART6>;
+			status = "disabled";
+		};
+
+		sdio2: sdio2@40011c00 {
+			compatible = "arm,pl180", "arm,primecell";
+			arm,primecell-periphid = <0x00880180>;
+			reg = <0x40011c00 0x400>;
+			clocks = <&rcc 0 STM32F7_APB2_CLOCK(SDMMC2)>;
+			clock-names = "apb_pclk";
+			interrupts = <103>;
+			max-frequency = <48000000>;
+			status = "disabled";
+		};
+
+		sdio1: sdio1@40012c00 {
+			compatible = "arm,pl180", "arm,primecell";
+			arm,primecell-periphid = <0x00880180>;
+			reg = <0x40012c00 0x400>;
+			clocks = <&rcc 0 STM32F7_APB2_CLOCK(SDMMC1)>;
+			clock-names = "apb_pclk";
+			interrupts = <49>;
+			max-frequency = <48000000>;
+			status = "disabled";
+		};
+
+		syscfg: system-config@40013800 {
+			compatible = "syscon";
+			reg = <0x40013800 0x400>;
+		};
+
+		exti: interrupt-controller@40013c00 {
+			compatible = "st,stm32-exti";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x40013C00 0x400>;
+			interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>;
+		};
+
+		timers9: timers@40014000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40014000 0x400>;
+			clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM9)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				status = "disabled";
+			};
+
+			timer@8 {
+				compatible = "st,stm32-timer-trigger";
+				reg = <8>;
+				status = "disabled";
+			};
+		};
+
+		timers10: timers@40014400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40014400 0x400>;
+			clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM10)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				status = "disabled";
+			};
+		};
+
+		timers11: timers@40014800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-timers";
+			reg = <0x40014800 0x400>;
+			clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM11)>;
+			clock-names = "int";
+			status = "disabled";
+
+			pwm {
+				compatible = "st,stm32-pwm";
+				status = "disabled";
+			};
+		};
+
+		pwrcfg: power-config@40007000 {
+			compatible = "syscon";
+			reg = <0x40007000 0x400>;
+		};
+
+		crc: crc@40023000 {
+			compatible = "st,stm32f7-crc";
+			reg = <0x40023000 0x400>;
+			clocks = <&rcc 0 12>;
+			status = "disabled";
+		};
+
+		rcc: rcc@40023800 {
+			#reset-cells = <1>;
+			#clock-cells = <2>;
+			compatible = "st,stm32f746-rcc", "st,stm32-rcc";
+			reg = <0x40023800 0x400>;
+			clocks = <&clk_hse>, <&clk_i2s_ckin>;
+			st,syscfg = <&pwrcfg>;
+			assigned-clocks = <&rcc 1 CLK_HSE_RTC>;
+			assigned-clock-rates = <1000000>;
+		};
+
+		dma1: dma@40026000 {
+			compatible = "st,stm32-dma";
+			reg = <0x40026000 0x400>;
+			interrupts = <11>,
+				     <12>,
+				     <13>,
+				     <14>,
+				     <15>,
+				     <16>,
+				     <17>,
+				     <47>;
+			clocks = <&rcc 0 STM32F7_AHB1_CLOCK(DMA1)>;
+			#dma-cells = <4>;
+			status = "disabled";
+		};
+
+		dma2: dma@40026400 {
+			compatible = "st,stm32-dma";
+			reg = <0x40026400 0x400>;
+			interrupts = <56>,
+				     <57>,
+				     <58>,
+				     <59>,
+				     <60>,
+				     <68>,
+				     <69>,
+				     <70>;
+			clocks = <&rcc 0 STM32F7_AHB1_CLOCK(DMA2)>;
+			#dma-cells = <4>;
+			st,mem2mem;
+			status = "disabled";
+		};
+
+		usbotg_hs: usb@40040000 {
+			compatible = "st,stm32f7-hsotg";
+			reg = <0x40040000 0x40000>;
+			interrupts = <77>;
+			clocks = <&rcc 0 STM32F7_AHB1_CLOCK(OTGHS)>;
+			clock-names = "otg";
+			g-rx-fifo-size = <256>;
+			g-np-tx-fifo-size = <32>;
+			g-tx-fifo-size = <128 128 64 64 64 64 32 32>;
+			status = "disabled";
+		};
+
+		usbotg_fs: usb@50000000 {
+			compatible = "st,stm32f4x9-fsotg";
+			reg = <0x50000000 0x40000>;
+			interrupts = <67>;
+			clocks = <&rcc 0 STM32F7_AHB2_CLOCK(OTGFS)>;
+			clock-names = "otg";
+			status = "disabled";
+		};
 	};
 };
 
 &systick {
+	clocks = <&rcc 1 0>;
 	status = "okay";
 };
diff --git a/arch/arm/dts/stm32f769-disco-u-boot.dtsi b/arch/arm/dts/stm32f769-disco-u-boot.dtsi
index 217c937..e9e43cb 100644
--- a/arch/arm/dts/stm32f769-disco-u-boot.dtsi
+++ b/arch/arm/dts/stm32f769-disco-u-boot.dtsi
@@ -61,94 +61,94 @@
 &pinctrl {
 	ethernet_mii: mii@0 {
 		pins {
-			pinmux = <STM32F746_PG13_FUNC_ETH_MII_TXD0_ETH_RMII_TXD0>,
-				 <STM32F746_PG14_FUNC_ETH_MII_TXD1_ETH_RMII_TXD1>,
-				 <STM32F746_PG11_FUNC_ETH_MII_TX_EN_ETH_RMII_TX_EN>,
-				 <STM32F746_PA2_FUNC_ETH_MDIO>,
-				 <STM32F746_PC1_FUNC_ETH_MDC>,
-				 <STM32F746_PA1_FUNC_ETH_MII_RX_CLK_ETH_RMII_REF_CLK>,
-				 <STM32F746_PA7_FUNC_ETH_MII_RX_DV_ETH_RMII_CRS_DV>,
-				 <STM32F746_PC4_FUNC_ETH_MII_RXD0_ETH_RMII_RXD0>,
-				 <STM32F746_PC5_FUNC_ETH_MII_RXD1_ETH_RMII_RXD1>;
+			pinmux = <STM32_PINMUX('G',13, AF11)>, /* ETH_RMII_TXD0 */
+				 <STM32_PINMUX('G',14, AF11)>, /* ETH_RMII_TXD1 */
+				 <STM32_PINMUX('G',11, AF11)>, /* ETH_RMII_TX_EN */
+				 <STM32_PINMUX('A', 2, AF11)>, /* ETH_MDIO */
+				 <STM32_PINMUX('C', 1, AF11)>, /* ETH_MDC */
+				 <STM32_PINMUX('A', 1, AF11)>, /* ETH_RMII_REF_CLK */
+				 <STM32_PINMUX('A', 7, AF11)>, /* ETH_RMII_CRS_DV */
+				 <STM32_PINMUX('C', 4, AF11)>, /* ETH_RMII_RXD0 */
+				 <STM32_PINMUX('C', 5, AF11)>; /* ETH_RMII_RXD1 */
 			slew-rate = <2>;
 		};
 	};
 
 	fmc_pins: fmc@0 {
 		pins {
-			pinmux = <STM32F746_PI10_FUNC_FMC_D31>,
-				 <STM32F746_PI9_FUNC_FMC_D30>,
-				 <STM32F746_PI7_FUNC_FMC_D29>,
-				 <STM32F746_PI6_FUNC_FMC_D28>,
-				 <STM32F746_PI3_FUNC_FMC_D27>,
-				 <STM32F746_PI2_FUNC_FMC_D26>,
-				 <STM32F746_PI1_FUNC_FMC_D25>,
-				 <STM32F746_PI0_FUNC_FMC_D24>,
-				 <STM32F746_PH15_FUNC_FMC_D23>,
-				 <STM32F746_PH14_FUNC_FMC_D22>,
-				 <STM32F746_PH13_FUNC_FMC_D21>,
-				 <STM32F746_PH12_FUNC_FMC_D20>,
-				 <STM32F746_PH11_FUNC_FMC_D19>,
-				 <STM32F746_PH10_FUNC_FMC_D18>,
-				 <STM32F746_PH9_FUNC_FMC_D17>,
-				 <STM32F746_PH8_FUNC_FMC_D16>,
+			pinmux = <STM32_PINMUX('I',10, AF12)>, /* D31 */
+				 <STM32_PINMUX('I', 9, AF12)>, /* D30 */
+				 <STM32_PINMUX('I', 7, AF12)>, /* D29 */
+				 <STM32_PINMUX('I', 6, AF12)>, /* D28 */
+				 <STM32_PINMUX('I', 3, AF12)>, /* D27 */
+				 <STM32_PINMUX('I', 2, AF12)>, /* D26 */
+				 <STM32_PINMUX('I', 1, AF12)>, /* D25 */
+				 <STM32_PINMUX('I', 0, AF12)>, /* D24 */
+				 <STM32_PINMUX('H',15, AF12)>, /* D23 */
+				 <STM32_PINMUX('H',14, AF12)>, /* D22 */
+				 <STM32_PINMUX('H',13, AF12)>, /* D21 */
+				 <STM32_PINMUX('H',12, AF12)>, /* D20 */
+				 <STM32_PINMUX('H',11, AF12)>, /* D19 */
+				 <STM32_PINMUX('H',10, AF12)>, /* D18 */
+				 <STM32_PINMUX('H', 9, AF12)>, /* D17 */
+				 <STM32_PINMUX('H', 8, AF12)>, /* D16 */
 
-				 <STM32F746_PD10_FUNC_FMC_D15>,
-				 <STM32F746_PD9_FUNC_FMC_D14>,
-				 <STM32F746_PD8_FUNC_FMC_D13>,
-				 <STM32F746_PE15_FUNC_FMC_D12>,
-				 <STM32F746_PE14_FUNC_FMC_D11>,
-				 <STM32F746_PE13_FUNC_FMC_D10>,
-				 <STM32F746_PE12_FUNC_FMC_D9>,
-				 <STM32F746_PE11_FUNC_FMC_D8>,
-				 <STM32F746_PE10_FUNC_FMC_D7>,
-				 <STM32F746_PE9_FUNC_FMC_D6>,
-				 <STM32F746_PE8_FUNC_FMC_D5>,
-				 <STM32F746_PE7_FUNC_FMC_D4>,
-				 <STM32F746_PD1_FUNC_FMC_D3>,
-				 <STM32F746_PD0_FUNC_FMC_D2>,
-				 <STM32F746_PD15_FUNC_FMC_D1>,
-				 <STM32F746_PD14_FUNC_FMC_D0>,
+				 <STM32_PINMUX('D',10, AF12)>, /* D15 */
+				 <STM32_PINMUX('D', 9, AF12)>, /* D14 */
+				 <STM32_PINMUX('D', 8, AF12)>, /* D13 */
+				 <STM32_PINMUX('E',15, AF12)>, /* D12 */
+				 <STM32_PINMUX('E',14, AF12)>, /* D11 */
+				 <STM32_PINMUX('E',13, AF12)>, /* D10 */
+				 <STM32_PINMUX('E',12, AF12)>, /* D9 */
+				 <STM32_PINMUX('E',11, AF12)>, /* D8 */
+				 <STM32_PINMUX('E',10, AF12)>, /* D7 */
+				 <STM32_PINMUX('E', 9, AF12)>, /* D6 */
+				 <STM32_PINMUX('E', 8, AF12)>, /* D5 */
+				 <STM32_PINMUX('E', 7, AF12)>, /* D4 */
+				 <STM32_PINMUX('D', 1, AF12)>, /* D3 */
+				 <STM32_PINMUX('D', 0, AF12)>, /* D2 */
+				 <STM32_PINMUX('D',15, AF12)>, /* D1 */
+				 <STM32_PINMUX('D',14, AF12)>, /* D0 */
 
-				 <STM32F746_PI5_FUNC_FMC_NBL3>,
-				 <STM32F746_PI4_FUNC_FMC_NBL2>,
-				 <STM32F746_PE1_FUNC_FMC_NBL1>,
-				 <STM32F746_PE0_FUNC_FMC_NBL0>,
+				 <STM32_PINMUX('I', 5, AF12)>, /* NBL3 */
+				 <STM32_PINMUX('I', 4, AF12)>, /* NBL2 */
+				 <STM32_PINMUX('E', 1, AF12)>, /* NBL1 */
+				 <STM32_PINMUX('E', 0, AF12)>, /* NBL0 */
 
-				 <STM32F746_PG5_FUNC_FMC_A15_FMC_BA1>,
-				 <STM32F746_PG4_FUNC_FMC_A14_FMC_BA0>,
+				 <STM32_PINMUX('G', 5, AF12)>, /* BA1 */
+				 <STM32_PINMUX('G', 4, AF12)>, /* BA0 */
 
-				 <STM32F746_PG1_FUNC_FMC_A11>,
-				 <STM32F746_PG0_FUNC_FMC_A10>,
-				 <STM32F746_PF15_FUNC_FMC_A9>,
-				 <STM32F746_PF14_FUNC_FMC_A8>,
-				 <STM32F746_PF13_FUNC_FMC_A7>,
-				 <STM32F746_PF12_FUNC_FMC_A6>,
-				 <STM32F746_PF5_FUNC_FMC_A5>,
-				 <STM32F746_PF4_FUNC_FMC_A4>,
-				 <STM32F746_PF3_FUNC_FMC_A3>,
-				 <STM32F746_PF2_FUNC_FMC_A2>,
-				 <STM32F746_PF1_FUNC_FMC_A1>,
-				 <STM32F746_PF0_FUNC_FMC_A0>,
+				 <STM32_PINMUX('G', 1, AF12)>, /* A11 */
+				 <STM32_PINMUX('G', 0, AF12)>, /* A10 */
+				 <STM32_PINMUX('F',15, AF12)>, /* A9 */
+				 <STM32_PINMUX('F',14, AF12)>, /* A8 */
+				 <STM32_PINMUX('F',13, AF12)>, /* A7 */
+				 <STM32_PINMUX('F',12, AF12)>, /* A6 */
+				 <STM32_PINMUX('F', 5, AF12)>, /* A5 */
+				 <STM32_PINMUX('F', 4, AF12)>, /* A4 */
+				 <STM32_PINMUX('F', 3, AF12)>, /* A3 */
+				 <STM32_PINMUX('F', 2, AF12)>, /* A2 */
+				 <STM32_PINMUX('F', 1, AF12)>, /* A1 */
+				 <STM32_PINMUX('F', 0, AF12)>, /* A0 */
 
-				 <STM32F746_PH3_FUNC_FMC_SDNE0>,
-				 <STM32F746_PH5_FUNC_FMC_SDNWE>,
-				 <STM32F746_PF11_FUNC_FMC_SDNRAS>,
-				 <STM32F746_PG15_FUNC_FMC_SDNCAS>,
-				 <STM32F746_PH2_FUNC_FMC_SDCKE0>,
-				 <STM32F746_PG8_FUNC_FMC_SDCLK>;
+				 <STM32_PINMUX('H', 3, AF12)>, /* SDNE0 */
+				 <STM32_PINMUX('H', 5, AF12)>, /* SDNWE */
+				 <STM32_PINMUX('F',11, AF12)>, /* SDNRAS */
+				 <STM32_PINMUX('G',15, AF12)>, /* SDNCAS */
+				 <STM32_PINMUX('H', 2, AF12)>, /* SDCKE0 */
+				 <STM32_PINMUX('G', 8, AF12)>; /* SDCLK> */
 			slew-rate = <2>;
 		};
 	};
 
 	qspi_pins: qspi@0 {
 		pins {
-			pinmux = <STM32F746_PB2_FUNC_QUADSPI_CLK>,
-				 <STM32F746_PB6_FUNC_QUADSPI_BK1_NCS>,
-				 <STM32F746_PC9_FUNC_QUADSPI_BK1_IO0>,
-				 <STM32F746_PC10_FUNC_QUADSPI_BK1_IO1>,
-				 <STM32F746_PD13_FUNC_QUADSPI_BK1_IO3>,
-				 <STM32F746_PE2_FUNC_QUADSPI_BK1_IO2>;
+			pinmux = <STM32_PINMUX('B', 2, AF9)>, /* CLK */
+				 <STM32_PINMUX('B', 6, AF10)>, /* BK1_NCS */
+				 <STM32_PINMUX('C', 9, AF9)>, /* BK1_IO0 */
+				 <STM32_PINMUX('C',10, AF9)>, /* BK1_IO1 */
+				 <STM32_PINMUX('D',13, AF9)>, /* BK1_IO3 */
+				 <STM32_PINMUX('E', 2, AF9)>; /* BK1_IO2 */
 			slew-rate = <2>;
 		};
 	};
diff --git a/arch/arm/dts/stm32f769-disco.dts b/arch/arm/dts/stm32f769-disco.dts
index 046bb22..483d896 100644
--- a/arch/arm/dts/stm32f769-disco.dts
+++ b/arch/arm/dts/stm32f769-disco.dts
@@ -1,5 +1,5 @@
 /*
- * Copyright 2016 - Vikas Manocha <vikas.manocha@st.com>
+ * Copyright 2017 - Vikas MANOCHA <vikas.manocha@st.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -42,14 +42,16 @@
 
 /dts-v1/;
 #include "stm32f746.dtsi"
-#include <dt-bindings/memory/stm32-sdram.h>
+#include "stm32f769-pinctrl.dtsi"
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "STMicroelectronics STM32F769-DISCO board";
-	compatible = "st,stm32f769-disco", "st,stm32f7";
+	compatible = "st,stm32f769-disco", "st,stm32f769";
 
 	chosen {
+		bootargs = "root=/dev/ram";
 		stdout-path = "serial0:115200n8";
 	};
 
@@ -60,26 +62,76 @@
 	aliases {
 		serial0 = &usart1;
 	};
+
+	leds {
+		compatible = "gpio-leds";
+		green {
+			gpios = <&gpioj 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+		red {
+			gpios = <&gpioj 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+		button@0 {
+			label = "User";
+			linux,code = <KEY_HOME>;
+			gpios = <&gpioa 0 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	usbotg_hs_phy: usb-phy {
+		#phy-cells = <0>;
+		compatible = "usb-nop-xceiv";
+		clocks = <&rcc 0 STM32F7_AHB1_CLOCK(OTGHSULPI)>;
+		clock-names = "main_clk";
+	};
+
+	mmc_vcard: mmc_vcard {
+		compatible = "regulator-fixed";
+		regulator-name = "mmc_vcard";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&cec {
+	pinctrl-0 = <&cec_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
 };
 
 &clk_hse {
 	clock-frequency = <25000000>;
 };
 
-&pinctrl {
-	usart1_pins_a: usart1@0	{
-		pins1 {
-		       pinmux = <STM32F746_PA9_FUNC_USART1_TX>;
-				bias-disable;
-				drive-push-pull;
-				slew-rate = <2>;
-		};
-		pins2 {
-			pinmux = <STM32F746_PA10_FUNC_USART1_RX>;
-			bias-disable;
-		};
-	};
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins_b>;
+	pinctrl-names = "default";
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+};
 
+&rtc {
+	status = "okay";
+};
+
+&sdio2 {
+	status = "okay";
+	vmmc-supply = <&mmc_vcard>;
+	cd-gpios = <&gpioi 15 GPIO_ACTIVE_LOW>;
+	broken-cd;
+	pinctrl-names = "default", "opendrain";
+	pinctrl-0 = <&sdio_pins_b>;
+	pinctrl-1 = <&sdio_pins_od_b>;
+	bus-width = <4>;
 };
 
 &usart1 {
@@ -88,12 +140,11 @@
 	status = "okay";
 };
 
-&sdio2 {
+&usbotg_hs {
+	dr_mode = "otg";
+	phys = <&usbotg_hs_phy>;
+	phy-names = "usb2-phy";
+	pinctrl-0 = <&usbotg_hs_pins_a>;
+	pinctrl-names = "default";
 	status = "okay";
-	cd-gpios = <&gpioi 15 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default", "opendrain";
-	pinctrl-0 = <&sdio_pins_b>;
-	pinctrl-1 = <&sdio_pins_od_b>;
-	bus-width = <4>;
-	max-frequency = <25000000>;
 };
diff --git a/arch/arm/dts/stm32f769-pinctrl.dtsi b/arch/arm/dts/stm32f769-pinctrl.dtsi
new file mode 100644
index 0000000..31005dd
--- /dev/null
+++ b/arch/arm/dts/stm32f769-pinctrl.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Alexandre Torgue  <alexandre.torgue@st.com> for STMicroelectronics.
+ */
+
+#include "stm32f7-pinctrl.dtsi"
+
+&pinctrl{
+	compatible = "st,stm32f769-pinctrl";
+};