mpc83xx: Migrate CONFIG_SYS_{BR, OR}*_PRELIM to Kconfig
Migrate the BR/OR settings to Kconfig. These must be known at compile
time, so cannot be configured via DT.
Configuration of this crucial variable should still be somewhat
comfortable. Hence, make its fields configurable in Kconfig, and
assemble the final value from these.
Signed-off-by: Mario Six <mario.six@gdsys.cc>
diff --git a/configs/MPC8349ITX_defconfig b/configs/MPC8349ITX_defconfig
index cfa31c7..0187f4f 100644
--- a/configs/MPC8349ITX_defconfig
+++ b/configs/MPC8349ITX_defconfig
@@ -132,3 +132,50 @@
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_OF_LIBFDT=y
+CONFIG_ELBC_BR0_OR0=y
+CONFIG_BR0_OR0_NAME="FLASH"
+CONFIG_BR0_OR0_BASE=0xFE000000
+CONFIG_BR0_MACHINE_GPCM=y
+CONFIG_BR0_PORTSIZE_16BIT=y
+CONFIG_OR0_AM_16_MBYTES=y
+CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR0_CSNT_EARLIER=y
+CONFIG_OR0_EAD_EXTRA=y
+CONFIG_OR0_SCY_15=y
+CONFIG_OR0_XACS_EXTENDED=y
+CONFIG_OR0_XAM_SET=y
+CONFIG_OR0_TRLX_RELAXED=y
+CONFIG_OR0_EHTR_8_CYCLE=y
+CONFIG_ELBC_BR1_OR1=y
+CONFIG_BR1_OR1_NAME="VSC7385"
+CONFIG_BR1_OR1_BASE=0xF8000000
+CONFIG_BR1_MACHINE_GPCM=y
+CONFIG_BR1_PORTSIZE_8BIT=y
+CONFIG_OR1_AM_128_KBYTES=y
+CONFIG_OR1_CSNT_EARLIER=y
+CONFIG_OR1_EAD_EXTRA=y
+CONFIG_OR1_SCY_15=y
+CONFIG_OR1_SETA_EXTERNAL=y
+CONFIG_OR1_XACS_EXTENDED=y
+CONFIG_OR1_TRLX_RELAXED=y
+CONFIG_OR1_EHTR_8_CYCLE=y
+CONFIG_ELBC_BR2_OR2=y
+CONFIG_BR2_OR2_NAME="LED"
+CONFIG_BR2_OR2_BASE=0xF9000000
+CONFIG_BR2_MACHINE_GPCM=y
+CONFIG_BR2_PORTSIZE_8BIT=y
+CONFIG_OR2_AM_2_MBYTES=y
+CONFIG_OR2_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR2_CSNT_EARLIER=y
+CONFIG_OR2_EAD_EXTRA=y
+CONFIG_OR2_SCY_9=y
+CONFIG_OR2_XACS_EXTENDED=y
+CONFIG_OR2_TRLX_RELAXED=y
+CONFIG_OR2_EHTR_8_CYCLE=y
+CONFIG_ELBC_BR3_OR3=y
+CONFIG_BR3_OR3_NAME="CF"
+CONFIG_BR3_OR3_BASE=0xF0000000
+CONFIG_BR3_MACHINE_UPMA=y
+CONFIG_BR3_PORTSIZE_16BIT=y
+CONFIG_OR3_AM_32_KBYTES=y
+CONFIG_OR3_BI_BURSTINHIBIT=y