Initial revision
diff --git a/cpu/sa1100/serial.c b/cpu/sa1100/serial.c
new file mode 100644
index 0000000..68bcd1f
--- /dev/null
+++ b/cpu/sa1100/serial.c
@@ -0,0 +1,158 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <SA-1100.h>
+
+void serial_setbrg (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ unsigned int reg = 0;
+
+ if (gd->baudrate == 1200)
+ reg = 191;
+ else if (gd->baudrate == 9600)
+ reg = 23;
+ else if (gd->baudrate == 19200)
+ reg = 11;
+ else if (gd->baudrate == 38400)
+ reg = 5;
+ else if (gd->baudrate == 57600)
+ reg = 3;
+ else if (gd->baudrate == 115200)
+ reg = 1;
+ else
+ hang ();
+
+#ifdef CONFIG_SERIAL1
+ /* Wait until port is ready ... */
+ while (Ser1UTSR1 & UTSR1_TBY) {
+ }
+
+ /* init serial serial 1 */
+ Ser1UTCR3 = 0x00;
+ Ser1UTSR0 = 0xff;
+ Ser1UTCR0 = (UTCR0_1StpBit | UTCR0_8BitData);
+ Ser1UTCR1 = 0;
+ Ser1UTCR2 = (u32) reg;
+ Ser1UTCR3 = (UTCR3_RXE | UTCR3_TXE);
+#elif CONFIG_SERIAL3
+ /* Wait until port is ready ... */
+ while (Ser3UTSR1 & UTSR1_TBY) {
+ }
+
+ /* init serial serial 3 */
+ Ser3UTCR3 = 0x00;
+ Ser3UTSR0 = 0xff;
+ Ser3UTCR0 = (UTCR0_1StpBit | UTCR0_8BitData);
+ Ser3UTCR1 = 0;
+ Ser3UTCR2 = (u32) reg;
+ Ser3UTCR3 = (UTCR3_RXE | UTCR3_TXE);
+#else
+#error "Bad: you didn't configured serial ..."
+#endif
+}
+
+
+/*
+ * Initialise the serial port with the given baudrate. The settings
+ * are always 8 data bits, no parity, 1 stop bit, no start bits.
+ *
+ */
+int serial_init (void)
+{
+ serial_setbrg ();
+
+ return (0);
+}
+
+
+/*
+ * Output a single byte to the serial port.
+ */
+void serial_putc (const char c)
+{
+#ifdef CONFIG_SERIAL1
+ /* wait for room in the tx FIFO on SERIAL1 */
+ while ((Ser1UTSR0 & UTSR0_TFS) == 0);
+
+ Ser1UTDR = c;
+#elif CONFIG_SERIAL3
+ /* wait for room in the tx FIFO on SERIAL3 */
+ while ((Ser3UTSR0 & UTSR0_TFS) == 0);
+
+ Ser3UTDR = c;
+#endif
+
+ /* If \n, also do \r */
+ if (c == '\n')
+ serial_putc ('\r');
+}
+
+/*
+ * Read a single byte from the serial port. Returns 1 on success, 0
+ * otherwise. When the function is succesfull, the character read is
+ * written into its argument c.
+ */
+int serial_tstc (void)
+{
+#ifdef CONFIG_SERIAL1
+ return Ser1UTSR1 & UTSR1_RNE;
+#elif CONFIG_SERIAL3
+ return Ser3UTSR1 & UTSR1_RNE;
+#endif
+}
+
+/*
+ * Read a single byte from the serial port. Returns 1 on success, 0
+ * otherwise. When the function is succesfull, the character read is
+ * written into its argument c.
+ */
+int serial_getc (void)
+{
+#ifdef CONFIG_SERIAL1
+ while (!(Ser1UTSR1 & UTSR1_RNE));
+
+ return (char) Ser1UTDR & 0xff;
+#elif CONFIG_SERIAL3
+ while (!(Ser3UTSR1 & UTSR1_RNE));
+
+ return (char) Ser3UTDR & 0xff;
+#endif
+}
+
+void
+serial_puts (const char *s)
+{
+ while (*s) {
+ serial_putc (*s++);
+ }
+}