ARM: dts: stm32mp1: sync device tree with v5.3-rc2
Synchronize device tree with v5.3-rc2 label and
update the associated u-boot dtsi.
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
diff --git a/arch/arm/dts/stm32mp157a-dk1.dts b/arch/arm/dts/stm32mp157a-dk1.dts
index adb2464..1d5c1a6 100644
--- a/arch/arm/dts/stm32mp157a-dk1.dts
+++ b/arch/arm/dts/stm32mp157a-dk1.dts
@@ -7,7 +7,7 @@
/dts-v1/;
#include "stm32mp157c.dtsi"
-#include "stm32mp157-pinctrl.dtsi"
+#include "stm32mp157xac-pinctrl.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/mfd/st,stpmic1.h>
@@ -28,6 +28,17 @@
reg = <0xc0000000 0x20000000>;
};
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gpu_reserved: gpu@d4000000 {
+ reg = <0xd4000000 0x4000000>;
+ no-map;
+ };
+ };
+
led {
compatible = "gpio-leds";
blue {
@@ -65,6 +76,47 @@
};
};
+&gpu {
+ contiguous-area = <&gpu_reserved>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c1_pins_a>;
+ pinctrl-1 = <&i2c1_pins_sleep_a>;
+ i2c-scl-rising-time-ns = <100>;
+ i2c-scl-falling-time-ns = <7>;
+ status = "okay";
+ /delete-property/dmas;
+ /delete-property/dma-names;
+
+ hdmi-transmitter@39 {
+ compatible = "sil,sii9022";
+ reg = <0x39>;
+ iovcc-supply = <&v3v3_hdmi>;
+ cvcc12-supply = <&v1v2_hdmi>;
+ reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>;
+ interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-parent = <&gpiog>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <<dc_pins_a>;
+ pinctrl-1 = <<dc_pins_sleep_a>;
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ sii9022_in: endpoint {
+ remote-endpoint = <<dc_ep0_out>;
+ };
+ };
+ };
+ };
+};
&i2c4 {
pinctrl-names = "default";
@@ -241,6 +293,20 @@
status = "okay";
};
+<dc {
+ status = "okay";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ltdc_ep0_out: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&sii9022_in>;
+ };
+ };
+};
+
&pwr {
pwr-supply = <&vdd>;
};