mmc: retry CMD1 in mmc_send_op_cond() until the eMMC is ready
According to eMMC specification v5.1 section 6.4.3, we should issue
CMD1 repeatedly in the idle state until the eMMC is ready even if
mmc_send_op_cond() send CMD1 with argument = 0. Otherwise some eMMC
devices seems to enter the inactive mode after mmc_complete_op_cond()
issued CMD0 when the eMMC device is busy.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index 620bb93..725a367 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -669,12 +669,15 @@
static int mmc_send_op_cond(struct mmc *mmc)
{
int err, i;
+ int timeout = 1000;
+ uint start;
/* Some cards seem to need this */
mmc_go_idle(mmc);
+ start = get_timer(0);
/* Asking to the card its capabilities */
- for (i = 0; i < 2; i++) {
+ for (i = 0; ; i++) {
err = mmc_send_op_cond_iter(mmc, i != 0);
if (err)
return err;
@@ -682,6 +685,10 @@
/* exit if not busy (flag seems to be inverted) */
if (mmc->ocr & OCR_BUSY)
break;
+
+ if (get_timer(start) > timeout)
+ return -ETIMEDOUT;
+ udelay(100);
}
mmc->op_cond_pending = 1;
return 0;